From 3e924126b56c4d421e8263d25f6b14aa4ceed047 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Sun, 13 Nov 2011 09:27:51 +0100 Subject: Imported nxcomp-3.1.0-4.tar.gz Summary: Imported nxcomp-3.1.0-4.tar.gz Keywords: Imported nxcomp-3.1.0-4.tar.gz into Git repository --- nxcomp/NX.h | 449 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 449 insertions(+) create mode 100755 nxcomp/NX.h (limited to 'nxcomp/NX.h') diff --git a/nxcomp/NX.h b/nxcomp/NX.h new file mode 100755 index 000000000..c041f8fbe --- /dev/null +++ b/nxcomp/NX.h @@ -0,0 +1,449 @@ +/**************************************************************************/ +/* */ +/* Copyright (c) 2001, 2007 NoMachine, http://www.nomachine.com/. */ +/* */ +/* NXCOMP, NX protocol compression and NX extensions to this software */ +/* are copyright of NoMachine. Redistribution and use of the present */ +/* software is allowed according to terms specified in the file LICENSE */ +/* which comes in the source distribution. */ +/* */ +/* Check http://www.nomachine.com/licensing.html for applicability. */ +/* */ +/* NX and NoMachine are trademarks of NoMachine S.r.l. */ +/* */ +/* All rights reserved. */ +/* */ +/**************************************************************************/ + +#ifndef NX_H +#define NX_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +#include +#include +#include +#include + +#define NX_FD_ANY -1 + +#define NX_MODE_ANY -1 +#define NX_MODE_CLIENT 1 +#define NX_MODE_SERVER 2 + +#define NX_DISPLAY_ANY NULL + +#define NX_SIGNAL_ANY -1 +#define NX_SIGNAL_ENABLE 1 +#define NX_SIGNAL_DISABLE 2 +#define NX_SIGNAL_RAISE 3 +#define NX_SIGNAL_FORWARD 4 + +#define NX_POLICY_IMMEDIATE 1 +#define NX_POLICY_DEFERRED 2 + +#define NX_ALERT_REMOTE 0 +#define NX_ALERT_LOCAL 1 + +#define NX_HANDLER_FLUSH 0 +#define NX_HANDLER_STATISTICS 1 + +#define NX_STATISTICS_PARTIAL 0 +#define NX_STATISTICS_TOTAL 1 + +#define NX_CHANNEL_X11 0 +#define NX_CHANNEL_CUPS 1 +#define NX_CHANNEL_SMB 2 +#define NX_CHANNEL_MEDIA 3 +#define NX_CHANNEL_HTTP 4 +#define NX_CHANNEL_FONT 5 +#define NX_CHANNEL_SLAVE 6 + +#define NX_FILE_SESSION 0 +#define NX_FILE_ERRORS 1 +#define NX_FILE_OPTIONS 2 +#define NX_FILE_STATS 3 + +/* + * The following are the new interfaces to the NX transport. The + * NX proxy software is now intended to be run as a library of a + * higher level communication manager (nxssh, nxhttp, nxrtp, etc, + * not only nxproxy). This is a work-in-progress, so expect these + * interfaces to change in future. At the present moment, as an + * example, there is no provision for creating and managing mul- + * tiple proxy connections. + */ + +/* + * Attach a NX transport to the provided descriptor. This should be + * done after having created a pair of connected sockets. + */ + +extern int NXTransCreate(int fd, int mode, const char *options); + +/* + * Tell the proxy to use the second descriptor as its own end of + * the internal connection to the NX agent. The NX agent will use + * the first descriptor. Setting an agent connection will have the + * effect of disabling further X client connections and, if it is + * possible, will trigger the use of the memory-to-memory transport. + */ + +extern int NXTransAgent(int fd[2]); + +/* + * Prepare the file sets and the timeout for a later execution of + * the select(). The masks and the timeout must persist across all + * the calls, so if you don't need any of the values, it is requi- + * red that you create empty masks and a default timeout. To save + * a check at each run, all the functions below assume that valid + * pointers are passed. + */ + +extern int NXTransPrepare(int *maxfds, fd_set *readfds, + fd_set *writefds, struct timeval *timeout); + +/* + * Call select() to find out the descriptors in the sets having + * pending data. + */ + +extern int NXTransSelect(int *result, int *error, int *maxfds, fd_set *readfds, + fd_set *writefds, struct timeval *timeout); + +/* + * Perform the required I/O on all the NX descriptors having pen- + * ding data. This can include reading and writing to the NX chan- + * nels, encoding and decoding the proxy data or managing any of + * the other NX resources. + */ + +extern int NXTransExecute(int *result, int *error, int *maxfds, fd_set *readfds, + fd_set *writefds, struct timeval *timeout); + +/* + * Run an empty loop, giving to the NX transport a chance to check + * its descriptors. + */ + +extern int NXTransContinue(struct timeval *timeout); + +/* + * Perform I/O on the given descriptors. If memory-to-memory trans- + * port has been activated and the descriptor is recognized as a + * valid agent connection, then the functions will read and write + * the data directly to the proxy buffer, otherwise the correspond- + * ing network operation will be performed. + */ + +extern int NXTransRead(int fd, char *data, int size); +extern int NXTransWrite(int fd, char *data, int size); +extern int NXTransReadable(int fd, int *readable); + +extern int NXTransReadVector(int fd, struct iovec *iovdata, int iovsize); +extern int NXTransWriteVector(int fd, struct iovec *iovdata, int iovsize); + +extern int NXTransClose(int fd); + +/* + * Return true if the NX transport is running. The fd parameter can + * be either the local descriptor attached to the NX transport or + * NX_FD_ANY. + */ + +extern int NXTransRunning(int fd); + +/* + * Close down the NX transport and free all the allocated resources. + * The fd parameter can be either the local descriptor or NX_FD_ANY. + * This must be explicitly called by the agent before the proxy can + * start the tear down procedure. + */ + +extern int NXTransDestroy(int fd); + +/* + * Tell to the proxy how to handle the standard POSIX signals. For + * example, given the SIGINT signal, the caller can specify any of + * the following actions: + * + * NX_SIGNAL_ENABLE: A signal handler will have to be installed by + * the library, so that it can be intercepted by + * the proxy. + * + * NX_SIGNAL_DISABLE: The signal will be handled by the caller and, + * eventually, forwarded to the proxy by calling + * NXTransSignal() explicitly. + * + * NX_SIGNAL_RAISE: The signal must be handled now, as if it had + * been delivered by the operating system. This + * function can be called by the agent with the + * purpose of propagating a signal to the proxy. + * + * NX_SIGNAL_FORWARD: A signal handler will have to be installed by + * the library but the library will have to call + * the original signal handler when the signal + * is received. + * + * As a rule of thumb, agents should let the proxy handle SIGUSR1 + * and SIGUSR2, used for producing the NX protocol statistics, and + * SIGHUP, used for disconnecting the NX transport. + * + * The following signals are blocked by default upon creation of the + * NX transport: + * + * SIGCHLD These signals should be always put under the control + * SIGUSR1 of the proxy. If agents are intercepting them, agents + * SIGUSR2 should later call NXTransSignal(..., NX_SIGNAL_RAISE) + * SIGHUP to forward the signal to the proxy. As an alternative + * they can specify a NX_SIGNAL_FORWARD action, so they, + * in turn, can be notified about the signal. This can + * be especially useful for SIGCHLD. + * + * SIGINT These signals should be intercepted by agents. Agents + * SIGTERM should ensure that NXTransDestroy() is called before + * exiting, to give the proxy a chance to shut down the + * NX transport. + * + * SIGPIPE This signal is blocked by the proxy, but not used to + * implement any functionality. It can be handled by the + * NX agent without affecting the proxy. + * + * SIGALRM This is now used by the proxy and agents should not + * redefine it. Agents can use the signal to implement + * their own timers but should not interleave calls to + * the NX transport and should restore the old handler + * when the timeout is raised. + * + * SIGVTALRM These signals are not used but may be used in future + * SIGWINCH versions of the library. + * SIGIO + * SIGTSTP + * SIGTTIN + * SIGTTOU + * + * By calling NXTransSignal(..., NX_SIGNAL_DISABLE) nxcomp will res- + * tore the signal handler that was saved at the time the proxy hand- + * ler was installed. This means that you should call the function + * just after the XOpenDisplay() or any other function used to init- + * ialize the NX transport. + */ + +extern int NXTransSignal(int signal, int action); + +/* + * Return a value between 0 and 9 indicating the congestion level + * based on the tokens still available. A value of 9 means that + * the link is congested and no further data can be sent. + */ + +extern int NXTransCongestion(int fd); + +/* + * Let the application to be notified by the proxy when an event oc- + * curs. The parameter, as set at the time the handler is installed, + * is passed each time to the callback function. The parameter is + * presumably the display pointer, given that at the present moment + * the NX transport doesn't have access to the display structure and + * so wouldn't be able to determine the display to pass to the call- + * back function. + * + * NX_HANDLER_FLUSH: The handler function is called when some + * more data has been written to the proxy + * link. + * + * The data is the number of bytes written. + * + * NX_HANDLER_STATISTICS: This handler is called to let the agent + * include arbitrary data in the transport + * statistics. The parameter, in this case, + * is a pointer to a pointer to a null term- + * inated string. The pointer is set at the + * time the handler is registered. The point- + * ed string will have to be filled by the + * agent with its statistics data. + * + * The data can be NX_STATISTICS_PARTIAL or NX_STATISTICS_TOTAL. The + * agent can refer to the value by using the NXStatisticsPartial and + * NXStatisticsTotal constants defined in NXvars.h. + * + * Note that these interfaces are used by Xlib and nxcompext. Agents + * should never call these interfaces directly, but use the nxcompext + * wrapper. + */ + +extern int NXTransHandler(int fd, int type, void (*handler)(void *parameter, + int reason), void *parameter); + +/* + * Set the policy to be used by the NX transport to write data to the + * proxy link: + * + * NX_POLICY_IMMEDIATE: When set to immediate, the proxy will try to + * write the data just after having encoded it. + * + * NX_POLICY_DEFERRED: When policy is set to deferred, data will be + * accumulated in a buffer and written to the + * remote proxy when NXTransFlush() is called by + * the agent. + */ + +extern int NXTransPolicy(int fd, int type); + +/* + * Query the number of bytes that have been accumulated for a deferred + * flush. + */ + +extern int NXTransFlushable(int fd); + +/* + * Tell to the NX transport to write all the accumulated data to the + * remote proxy. + */ + +extern int NXTransFlush(int fd); + +/* + * Create a new channel of the given type. It returns 1 on success, + * 0 if the NX transport is not running, or -1 in the case of error. + * On success, the descriptor provided by the caller can be later + * used for the subsequent I/O. The type parameter not only tells to + * the proxy the remote port where the channel has to be connected, + * but also gives a hint about the type of data that will be carried + * by the channel, so that the proxy can try to optimize the traffic + * on the proxy link. + * + * NX_CHANNEL_X: The channel will carry X traffic and it + * will be connected to the remote X display. + * + * NX_CHANNEL_CUPS: The channel will carry CUPS/IPP protocol. + * + * NX_CHANNEL_SMB: The channel will carry SMB/CIFS protocol. + * + * NX_CHANNEL_MEDIA: The channel will transport audio or other + * multimedia data. + * + * NX_CHANNEL_HTTP: The channel will carry HTTP protocol. + * + * NX_CHANNEL_FONT: The channel will forward a X font server + * connection. + * + * Only a proxy running at the NX server/X client side will be able + * to create a X, CUPS, SMB, MEDIA and HTTP channel. A proxy running + * at the NX client/X server side can create font server connections. + * The channel creation will also fail if the remote end has not been + * set up to forward the connection. + * + * To create a new channel the agent will have to set up a socketpair + * and pass to the proxy one of the socket descriptors. + * + * Example: + * + * #include + * #include + * + * int fds[2]; + * + * if (socketpair(PF_LOCAL, SOCK_STREAM, 0, fds) < 0) + * { + * ... + * } + * else + * { + * // + * // Use fds[0] locally and let the + * // proxy use fds[1]. + * // + * + * if (NXTransChannel(NX_FD_ANY, fds[1], NX_CHANNEL_X) <= 0) + * { + * ... + * } + * + * // + * // The agent can now use fds[0] in + * // read(), write() and select() + * // system calls. + * // + * + * ... + * } + * + * Note that all the I/O on the descriptor should be non-blocking, to + * give a chance to the NX transport to run in the background and handle + * the data that will be fed to the agent's side of the socketpair. This + * will happen automatically, as long as the agent uses the XSelect() + * version of the select() function (as it is normal whenever performing + * Xlib I/O). In all the other cases, like presumably in the agent's main + * loop, the agent will have to loop through NXTransPrepare(), NXTrans- + * Select() and NXTransExecute() functions explicitly, adding to the sets + * the descriptors that are awaited by the agent. Please check the imple- + * mentation of _XSelect() in nx-X11/lib/X11/XlibInt.c for an example. + */ + +extern int NXTransChannel(int fd, int channelfd, int type); + +/* + * Return the name of the files used by the proxy for the current session. + * + * The type parameter can be: + * + * NX_FILE_SESSION: Usually the file 'session' in the user's session + * directory. + * + * NX_FILE_ERRORS: The file used for the diagnostic output. Usually + * the file 'errors' in the session directory. + * + * NX_FILE_OPTIONS: The file containing the NX options, if any. + * + * NX_FILE_STATS: The file used for the statistics output. + * + * The returned string is allocated in static memory. The caller should + * copy the string upon returning from the function, without freeing the + * pointer. + */ + +extern const char *NXTransFile(int type); + +/* + * Return the time in milliseconds elapsed since the last call to this + * same function. + */ + +extern long NXTransTime(void); + +/* + * Other interfaces to the internal transport functions. + */ + +extern int NXTransProxy(int fd, int mode, const char *display); + +extern int NXTransClient(const char *display); + +extern int NXTransDialog(const char *caption, const char *message, + const char *window, const char *type, int local, + const char *display); + +extern int NXTransAlert(int code, int local); + +extern int NXTransWatchdog(int timeout); + +extern int NXTransKeeper(int caches, int images, const char *root); + +extern void NXTransExit(int code) __attribute__((noreturn)); + +extern int NXTransParseCommandLine(int argc, const char **argv); +extern int NXTransParseEnvironment(const char *env, int force); + +extern void NXTransCleanup(void) __attribute__((noreturn)); + +#ifdef __cplusplus +} +#endif + +#endif /* NX_H */ -- cgit v1.2.3 From 799bf672a3588f205bd18ef39d9908069e0cd6d5 Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Sun, 13 Nov 2011 09:27:52 +0100 Subject: Imported nxcomp-3.4.0-1.tar.gz Summary: Imported nxcomp-3.4.0-1.tar.gz Keywords: Imported nxcomp-3.4.0-1.tar.gz into Git repository --- nxcomp/NX.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) mode change 100755 => 100644 nxcomp/NX.h (limited to 'nxcomp/NX.h') diff --git a/nxcomp/NX.h b/nxcomp/NX.h old mode 100755 new mode 100644 index c041f8fbe..7da1eec37 --- a/nxcomp/NX.h +++ b/nxcomp/NX.h @@ -1,6 +1,6 @@ /**************************************************************************/ /* */ -/* Copyright (c) 2001, 2007 NoMachine, http://www.nomachine.com/. */ +/* Copyright (c) 2001, 2009 NoMachine, http://www.nomachine.com/. */ /* */ /* NXCOMP, NX protocol compression and NX extensions to this software */ /* are copyright of NoMachine. Redistribution and use of the present */ @@ -9,7 +9,7 @@ /* */ /* Check http://www.nomachine.com/licensing.html for applicability. */ /* */ -/* NX and NoMachine are trademarks of NoMachine S.r.l. */ +/* NX and NoMachine are trademarks of Medialogic S.p.A. */ /* */ /* All rights reserved. */ /* */ -- cgit v1.2.3 From 477961678194817aaf1aaf3602f1c91d288a539d Mon Sep 17 00:00:00 2001 From: Reinhard Tartler Date: Sun, 13 Nov 2011 09:27:53 +0100 Subject: Imported nxcomp-3.4.0-6.tar.gz Summary: Imported nxcomp-3.4.0-6.tar.gz Keywords: Imported nxcomp-3.4.0-6.tar.gz into Git repository --- nxcomp/NX.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'nxcomp/NX.h') diff --git a/nxcomp/NX.h b/nxcomp/NX.h index 7da1eec37..d98af79bb 100644 --- a/nxcomp/NX.h +++ b/nxcomp/NX.h @@ -1,6 +1,6 @@ /**************************************************************************/ /* */ -/* Copyright (c) 2001, 2009 NoMachine, http://www.nomachine.com/. */ +/* Copyright (c) 2001, 2010 NoMachine, http://www.nomachine.com/. */ /* */ /* NXCOMP, NX protocol compression and NX extensions to this software */ /* are copyright of NoMachine. Redistribution and use of the present */ -- cgit v1.2.3