--- ./nx-X11/lib/xtrans/Xtranssock.c.X.original	2015-02-13 14:03:44.672442927 +0100
+++ ./nx-X11/lib/xtrans/Xtranssock.c	2015-02-13 14:03:44.672442927 +0100
@@ -53,6 +53,35 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+/**************************************************************************/
+/*                                                                        */
+/* Copyright (c) 2001, 2011 NoMachine, http://www.nomachine.com/.         */
+/*                                                                        */
+/* NX-X11, NX protocol compression and NX extensions to this software     */
+/* are copyright of NoMachine. Redistribution and use of the present      */
+/* software is allowed according to terms specified in the file LICENSE   */
+/* which comes in the source distribution.                                */
+/*                                                                        */
+/* Check http://www.nomachine.com/licensing.html for applicability.       */
+/*                                                                        */
+/* NX and NoMachine are trademarks of Medialogic S.p.A.                   */
+/*                                                                        */
+/* All rights reserved.                                                   */
+/*                                                                        */
+/**************************************************************************/
+
+#ifdef NX_TRANS_SOCKET
+
+#ifdef NX_TRANS_DEBUG
+#define XTRANSDEBUG 5
+#endif
+
+#ifndef PF_LOCAL
+#define PF_LOCAL PF_UNIX
+#endif
+
+#endif
+
 #include <ctype.h>
 #ifdef XTHREADS
 #include <X11/Xthreads.h>
@@ -294,6 +323,560 @@
 static int haveIPv6 = 1;
 #endif
 
+#ifndef X11_t
+
+/*
+ * No NX changes if this is not
+ * compiled as a X11 transport.
+ */
+
+#undef NX_TRANS_SOCKET
+
+#endif
+
+#ifdef NX_TRANS_SOCKET
+
+#ifdef TRANS_CLIENT
+
+#include "NX.h"
+
+typedef struct
+{
+    XtransConnInfo info;
+    int            local;
+    int            remote;
+    int            congestion;
+
+} _NXProxyConnInfo;
+
+#define NX_PROXY_CONN_LIMIT     256
+
+static _NXProxyConnInfo *_NXProxyConnInfoTab[NX_PROXY_CONN_LIMIT];
+
+#endif /* #ifdef TRANS_CLIENT */
+
+/*
+ * Override the UNIX_DIR and UNIX_PATH settings and
+ * make them configurable, based on the NX_TEMP or
+ * the TEMP environment.
+ *
+ * We must be careful as the same defines are used
+ * for different directories, based on the subsystem
+ * that is compiling this, while we want to override
+ * only the '/tmp/.X11-unix' and '/tmp/.X11-unix/X'
+ * settings.
+ */
+
+static char _NXUnixDir[1024];
+static char _NXUnixPath[1024];
+
+static char *_NXGetUnixDir(char *dir)
+{
+    const char *tempDir;
+
+    PRMSG (3, "_NXGetUnixDir(%s)\n", dir, 0, 0);
+
+    if (strcmp(dir, UNIX_DIR) != 0)
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetUnixDir: Returning other Unix directory [%s].\n", dir);
+#endif
+        return dir;
+    }
+
+    /*
+     * Check the environment only once.
+     */
+
+    if (*_NXUnixDir != '\0')
+    {
+        return _NXUnixDir;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetUnixDir: Trying with the NX_TEMP environment.\n");
+#endif
+
+    tempDir = getenv("NX_TEMP");
+
+    if (tempDir == NULL || *tempDir == '\0')
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetUnixDir: Trying with the TEMP environment.\n");
+#endif
+
+        tempDir = getenv("TEMP");
+    }
+
+    if (tempDir != NULL && *tempDir != '\0')
+    {
+        if (strlen(tempDir) + strlen("/.X11-unix") + 1 > 1024)
+        {
+#ifdef NX_TRANS_TEST
+            fprintf(stderr, "_NXGetUnixDir: WARNING! Maximum length of X11 Unix directory exceeded.\n");
+#endif
+            goto _NXGetUnixDirError;
+        }
+
+        strcpy(_NXUnixDir, tempDir);
+        strcat(_NXUnixDir, "/.X11-unix");
+
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetUnixDir: Using X11 Unix directory [%s].\n", _NXUnixDir);
+#endif
+
+        return _NXUnixDir;
+    }
+
+_NXGetUnixDirError:
+
+    strcpy(_NXUnixDir, dir);
+ 
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetUnixDir: Returning default X11 Unix directory [%s].\n", _NXUnixDir);
+#endif
+
+    return _NXUnixDir;
+}
+
+static char *_NXGetUnixPath(char *path)
+{
+    const char *unixDir;
+
+    PRMSG (3, "_NXGetUnixPath(%s)\n", path, 0, 0);
+
+    if (strcmp(path, UNIX_PATH) != 0)
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetUnixPath: Returning other X11 Unix path [%s].\n", path);
+#endif
+        return path;
+    }
+
+    /*
+     * Check the environment only once.
+     */
+
+    if (*_NXUnixPath != '\0')
+    {
+        return _NXUnixPath;
+    }
+
+    unixDir = _NXGetUnixDir(UNIX_DIR);
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetUnixPath: Got X11 Unix directory [%s].\n", unixDir);
+#endif
+
+    if (strlen(unixDir) + strlen("/X") + 1 > 1024)
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetUnixPath: WARNING! Maximum length of X11 Unix path exceeded.\n");
+#endif
+
+        goto _NXGetUnixPathError;
+    }
+
+    strcpy(_NXUnixPath, unixDir);
+    strcat(_NXUnixPath, "/X");
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetUnixPath: Returning X11 Unix path [%s].\n", _NXUnixPath);
+#endif
+
+    return _NXUnixPath;
+
+_NXGetUnixPathError:
+
+    strcpy(_NXUnixPath, path);
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetUnixPath: Returning default X11 Unix path [%s].\n", _NXUnixPath);
+#endif
+
+    return _NXUnixPath;
+}
+
+#ifdef hpux
+
+static char *_NXGetOldUnixPath(char *path)
+{
+    PRMSG (3, "_NXGetOldUnixPath(%s)\n", path, 0, 0);
+
+    if (strcmp(path, OLD_UNIX_PATH) == 0)
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "_NXGetOldUnixPath: Returning X11 Unix path [%s].\n",
+                    _NXGetUnixPath(path));
+#endif
+
+        return _NXGetUnixPath(path);
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "_NXGetOldUnixPath: Returning other old X11 Unix path [%s].\n", path);
+#endif
+
+    return path;
+}
+
+#endif /* #ifdef hpux */
+
+/*
+ * Forcibly close any connection attempt on the
+ * listening socket. Need this to avoid loopback
+ * connections to the agent server.
+ */
+
+#ifdef TRANS_SERVER
+
+void TRANS(SocketRejectConnection) (XtransConnInfo ciptr)
+{
+    size_t sa_l = sizeof(struct sockaddr);
+    struct sockaddr sa;
+    fd_set fs;
+    struct timeval t;
+    int f;
+
+    PRMSG (3, "SocketRejectConnection(%x)\n", ciptr, 0, 0);
+
+    FD_ZERO(&fs);
+    FD_SET(ciptr -> fd, &fs);
+
+    t.tv_sec  = 0;
+    t.tv_usec = 0;
+
+    /*
+     * Check if there is an awaiting connection.
+     */
+
+    if (select(ciptr -> fd + 1, &fs, NULL, NULL, &t) == 1)
+    {
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "SocketRejectConnection: Accepting connection attempt on fd [%d].\n",
+                    ciptr -> fd);
+#endif
+        /*
+         * If there is one, close it.
+         */
+ 
+        if ((f = accept(ciptr -> fd, &sa, &sa_l)) >= 0)
+        {
+#ifdef NX_TRANS_TEST
+            fprintf(stderr, "SocketRejectConnection: Closing connection attempt on fd [%d].\n",
+                        ciptr -> fd);
+#endif
+            close(f);
+        }
+    }
+}
+
+#endif /* #ifdef TRANS_SERVER */
+
+#ifdef TRANS_CLIENT
+
+void *TRANS(SocketProxyConnInfo) (XtransConnInfo ciptr)
+{
+    if (_NXProxyConnInfoTab[ciptr->fd] != NULL)
+    {
+      return ciptr->priv;
+    }
+
+    return NULL;
+}
+
+static XtransConnInfo TRANS(SocketCreateConnInfo) ()
+{
+    XtransConnInfo ciptr;
+
+    int fds[2];
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCreateConnInfo: Going to create the NX connection info.\n");
+#endif
+
+    if ((ciptr = (XtransConnInfo) calloc (1, sizeof(struct _XtransConnInfo))) == NULL)
+    {
+        PRMSG (1, "SocketCreateConnInfo: malloc failed\n", 0, 0, 0);
+        return NULL;
+    }
+
+    /*
+     * Create a pair of sockets. We'll communicate with
+     * the NX proxy by reading and writing to our end.
+     */
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCreateConnInfo: Going to create the NX socketpair.\n");
+#endif
+
+    if (socketpair(PF_LOCAL, SOCK_STREAM, 0, fds) < 0)
+    {
+        PRMSG (1, "SocketCreateConnInfo: socketpair() failed.\n", 0, 0, 0);
+        xfree ((char *) ciptr);
+        return NULL;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCreateConnInfo: X socket end is [%d] NX proxy end is [%d].\n",
+                fds[0], fds[1]);
+#endif
+
+    /*
+     * Save in _NXProxyConnInfoTab the local and remote end of
+     * the socketpair. The remote end will be used by the proxy.
+     * When the memory-to-memory transport is activated, the
+     * agent and the proxy don't read or write to the real des-
+     * criptors but the communication takes place by reading
+     * and writing to the proxy's buffers.
+     */
+
+    ciptr->fd = fds[0];
+
+    if (ciptr->fd >= NX_PROXY_CONN_LIMIT)
+    {
+        PRMSG (1, "SocketCreateConnInfo: No space for a new _NXProxyConnInfo for [%d].\n",
+                  ciptr->fd, 0, 0);
+        xfree ((char *) ciptr);
+        return NULL;
+    }
+    else if (_NXProxyConnInfoTab[ciptr->fd] != NULL)
+    {
+        PRMSG (1, "SocketCreateConnInfo: _NXProxyConnInfo for [%d] is not NULL. Exiting.\n",
+                   ciptr->fd, 0, 0);
+        exit(1);
+    }
+
+    _NXProxyConnInfoTab[ciptr->fd] = (_NXProxyConnInfo *) xcalloc(1, sizeof(_NXProxyConnInfo));
+
+    if (_NXProxyConnInfoTab[ciptr->fd] == NULL)
+    {
+        PRMSG (1, "SocketCreateConnInfo: Alloc of _NXProxyConnInfo failed.\n", 0, 0, 0);
+        xfree ((char *) ciptr);
+        return NULL;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCreateConnInfo: Allocated new _NXProxyConnInfo for [%d].\n",
+                ciptr->fd);
+#endif
+
+    _NXProxyConnInfoTab[ciptr->fd]->info       = ciptr;
+    _NXProxyConnInfoTab[ciptr->fd]->local      = fds[0];
+    _NXProxyConnInfoTab[ciptr->fd]->remote     = fds[1];
+    _NXProxyConnInfoTab[ciptr->fd]->congestion = 0;
+
+    ciptr->priv = (char *) _NXProxyConnInfoTab[ciptr->fd];
+
+    return ciptr;
+}
+
+static int TRANS(SocketConnectConnInfo) (XtransConnInfo ciptr, char *host, char *port)
+{
+    int fds[2];
+    char display[1024];
+
+    _NXProxyConnInfo *proxy_conn;
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketConnectConnInfo: Going to connect NX fd [%d] to host [%s] port [%s].\n",
+                ciptr->fd, host, port);
+#endif
+
+    /*
+     * We should have already created the socket pair.
+     */
+
+    proxy_conn = (_NXProxyConnInfo *) ciptr->priv;
+
+    if (proxy_conn == NULL)
+    {
+        PRMSG (1, "SocketConnectConnInfo: Pointer to _NXProxyConnInfo is NULL. Exiting.\n", 0, 0, 0);
+
+        exit(1);
+    }
+    else if (_NXProxyConnInfoTab[ciptr->fd] != (_NXProxyConnInfo *) ciptr->priv)
+    {
+        PRMSG (1, "SocketConnectConnInfo: Can't find _NXProxyConnInfo in table. Exiting.\n",
+                   0, 0, 0);
+
+        exit(1);
+    }
+
+    if (strlen(host) + strlen(port) + 1 >= 1023)
+    {
+        PRMSG (1, "SocketConnectConnInfo: Length of NX display string '%s:%s' would exceed %d characters.\n",
+                   host, port, 1023);
+
+        return TRANS_CONNECT_FAILED;
+    }
+
+    sprintf(display, "%s:%s", host, port);
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketConnectConnInfo: Setting close-on-exec flag on local NX descriptor [%d].\n",
+                proxy_conn -> local);
+#endif
+
+#ifdef F_SETFD
+#ifdef FD_CLOEXEC
+    if (fcntl(proxy_conn -> local, F_SETFD, FD_CLOEXEC) != 0)
+#else
+    if (fcntl(proxy_conn -> local, F_SETFD, 1) != 0)
+#endif
+#endif
+    {
+        PRMSG (1, "SocketConnectConnInfo: Cannot set close-on-exec on local NX descriptor [%d].\n",
+                   proxy_conn -> local, 0, 0);
+
+        return TRANS_CONNECT_FAILED;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketConnectConnInfo: Creating the NX transport with display [%s].\n",
+                display);
+#endif
+
+    if (NXTransCreate(NX_FD_ANY, NX_MODE_CLIENT, display) < 0)
+    {
+        PRMSG (1, "SocketConnectConnInfo: Cannot create the NX transport.\n",
+                   0, 0, 0);
+
+        return TRANS_CONNECT_FAILED;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketConnectConnInfo: Starting the NX agent with descriptor [%d].\n",
+                proxy_conn -> remote);
+#endif
+
+    fds[0] = proxy_conn -> local;
+    fds[1] = proxy_conn -> remote;
+
+    NXTransAgent(fds);
+
+    return 0;
+}
+
+static void TRANS(SocketCloseConnInfo) (XtransConnInfo ciptr)
+{
+    _NXProxyConnInfo *proxy_conn;
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCloseConnInfo: Going to close the NX fd [%d].\n", ciptr->fd);
+#endif
+
+    proxy_conn = (_NXProxyConnInfo *) ciptr->priv;
+
+    if (proxy_conn == NULL)
+    {
+        PRMSG (1, "SocketCloseConnInfo: Pointer to _NXProxyConnInfo is NULL. Exiting.\n", 0, 0, 0);
+
+        exit(1);
+    }
+    else if (ciptr->fd >= NX_PROXY_CONN_LIMIT ||
+                 _NXProxyConnInfoTab[ciptr->fd] != (_NXProxyConnInfo *) ciptr->priv)
+    {
+        PRMSG (1, "SocketCloseConnInfo: Can't find _NXProxyConnInfo in table. Exiting.\n",
+                   0, 0, 0);
+        exit(1);
+    }
+    else if (_NXProxyConnInfoTab[ciptr->fd] -> info != ciptr ||
+                 _NXProxyConnInfoTab[ciptr->fd] -> local != ciptr->fd)
+    {
+        PRMSG (1, "SocketCloseConnInfo: Invalid _NXProxyConnInfo structure for [%d]. Exiting.\n",
+                   ciptr->fd, 0, 0);
+        exit(1);
+    }
+    else if (proxy_conn->local < 0 || proxy_conn->remote < 0)
+    {
+        PRMSG (1, "SocketCloseConnInfo: Invalid socket pair in NX connection for [%d]. Exiting.\n",
+                   ciptr->fd, 0, 0);
+        exit(1);
+    }
+
+    NXTransClose(ciptr->fd);
+
+    /*
+     *  Get rid of the _NXProxyConnInfo structure.
+     */
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCloseConnInfo: Freeing _NXProxyConnInfo structure for [%d].\n",
+                ciptr->fd);
+#endif
+
+    xfree((char *) _NXProxyConnInfoTab[ciptr->fd]);
+
+    _NXProxyConnInfoTab[ciptr->fd] = NULL;
+
+    ciptr->priv = NULL;
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCloseConnInfo: Should now close the local descriptor [%d].\n",
+                ciptr->fd);
+#endif
+}
+
+#endif /* #ifdef TRANS_CLIENT */
+
+#if defined(TRANS_CLIENT) && defined(NX_TRANS_CHANGE)
+
+/*
+ * Check the congestion state of the NX transport
+ * and return 1 if there has been a change. This
+ * can be extended by adding a few counters track-
+ * ing the bandwidth usage of the X11 connection.
+ */
+
+int TRANS(SocketCongestionChange) (XtransConnInfo ciptr, int *state)
+{
+    int congestion;
+
+    _NXProxyConnInfo *proxy_conn;
+
+    PRMSG (3, "SocketCongestionChange(%x)\n", ciptr, 0, 0);
+
+    proxy_conn = (_NXProxyConnInfo *) ciptr->priv;
+
+    if (proxy_conn == NULL)
+    {
+#ifdef NX_TRANS_DEBUG
+        fprintf(stderr, "SocketCongestionChange: Descriptor [%d] doesn't appear to be a NX connection.\n",
+                    ciptr->fd);
+#endif
+        return 0;
+    }
+
+#ifdef NX_TRANS_DEBUG
+    fprintf(stderr, "SocketCongestionChange: Checking congestion on fd [%d] with old state [%d].\n",
+                ciptr->fd, proxy_conn->congestion);
+#endif
+
+    congestion = NXTransCongestion(ciptr->fd);
+
+    if (congestion != proxy_conn->congestion)
+    {
+        proxy_conn->congestion = congestion;
+
+#ifdef NX_TRANS_TEST
+        fprintf(stderr, "SocketCongestionChange: Change detected on fd [%d] with new state [%d].\n",
+                    ciptr->fd, proxy_conn->congestion);
+#endif
+        return 1;
+    }
+
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketCongestionChange: No change on fd [%d] with current state [%d].\n",
+                ciptr->fd, congestion);
+#endif
+    return 0;
+}
+
+#endif /* #if defined(TRANS_CLIENT) && defined(NX_TRANS_CHANGE) */
+
+#endif /* #ifdef NX_TRANS_SOCKET */
+
 /*
  * These are some utility function used by the real interface function below.
  */
@@ -562,6 +1145,29 @@
     SocketInitOnce();
 
     while ((i = TRANS(SocketSelectFamily) (i, transname)) >= 0) {
+
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+        if ((!strcmp(protocol, "local") || !strcmp(protocol, "nx")) &&
+                (!strcasecmp(host, "nx") || !strncasecmp(host, "nx,", 3)))
+        {
+            ciptr = TRANS(SocketCreateConnInfo) ();
+
+            if (ciptr == NULL)
+            {
+                PRMSG (1, "SocketOpenCOTSClient: Unable to create the NX connection info for %s.\n",
+                           transname, 0, 0);
+
+                return NULL;
+            }
+
+            ciptr->index = i;
+
+            return ciptr;
+        }
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
 	if ((ciptr = TRANS(SocketOpen) (
 		 i, Sockettrans2devtab[i].devcotsname)) != NULL)
 	    break;
@@ -576,6 +1182,12 @@
 	return NULL;
     }
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    ciptr->priv = NULL;
+
+#endif
+
     /* Save the index for later use */
 
     ciptr->index = i;
@@ -677,6 +1289,29 @@
     SocketInitOnce();
 
     while ((i = TRANS(SocketSelectFamily) (i, thistrans->TransName)) >= 0) {
+
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+        if ((!strcmp(protocol, "local") || !strcmp(protocol, "nx")) &&
+                (!strcasecmp(host, "nx") || !strncasecmp(host, "nx,", 3)))
+        {
+            ciptr = TRANS(SocketCreateConnInfo) ();
+
+            if (ciptr == NULL)
+            {
+                PRMSG (1, "SocketOpenCLTSClient: Unable to create the NX connection info for %s.\n",
+                           thistrans->TransName, 0, 0);
+
+                return NULL;
+            }
+
+            ciptr->index = i;
+
+            return ciptr;
+        }
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
 	if ((ciptr = TRANS(SocketOpen) (
 		 i, Sockettrans2devtab[i].devcotsname)) != NULL)
 	    break;
@@ -691,6 +1326,12 @@
 	return NULL;
     }
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    ciptr->priv = NULL;
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
     /* Save the index for later use */
 
     ciptr->index = i;
@@ -826,6 +1467,11 @@
 {
     PRMSG (2,"SocketSetOption(%d,%d,%d)\n", ciptr->fd, option, arg);
 
+#ifdef NX_TRANS_TEST
+    fprintf(stderr, "SocketSetOption: WARNING! Not setting option [%d] with value [%d] on descriptor [%d].\n",
+                option, arg, ciptr -> fd);
+#endif
+
     return -1;
 }
 
@@ -875,6 +1521,11 @@
     else
 	retry = 0;
 
+#if defined(NX_TRANS_SOCKET) && defined(NX_TRANS_TEST)
+    fprintf(stderr, "SocketCreateListener: Creating listener for ciptr at [%p] on path [%s].\n",
+                (void *) ciptr, ((struct sockaddr_un *) sockname)->sun_family == AF_UNIX ?
+                    ((struct sockaddr_un *) sockname)->sun_path : "TCP");
+#endif
     while (bind (fd, (struct sockaddr *) sockname, namelen) < 0)
     {
 	if (errno == EADDRINUSE) {
@@ -926,6 +1577,11 @@
 
     ciptr->flags = 1 | (ciptr->flags & TRANS_KEEPFLAGS);
 
+#if defined(NX_TRANS_SOCKET) && defined(NX_TRANS_TEST)
+    fprintf(stderr, "SocketCreateListener: Set flags to [%d] for ciptr [%p].\n",
+                ciptr->flags, (void *) ciptr);
+#endif
+
     return 0;
 }
 
@@ -1084,9 +1740,15 @@
 #else
     mode = 0777;
 #endif
+#ifdef NX_TRANS_SOCKET
+    if (trans_mkdir(_NXGetUnixDir(UNIX_DIR), mode) == -1) {
+        PRMSG (1, "SocketUNIXCreateListener: mkdir(%s) failed, errno = %d\n",
+               _NXGetUnixDir(UNIX_DIR), errno, 0);
+#else
     if (trans_mkdir(UNIX_DIR, mode) == -1) {
 	PRMSG (1, "SocketUNIXCreateListener: mkdir(%s) failed, errno = %d\n",
 	       UNIX_DIR, errno, 0);
+#endif
 	(void) umask (oldUmask);
 	return TRANS_CREATE_LISTENER_FAILED;
     }
@@ -1095,12 +1757,20 @@
     sockname.sun_family = AF_UNIX;
 
     if (port && *port) {
+#ifdef NX_TRANS_SOCKET
+        if (set_sun_path(port, _NXGetUnixPath(UNIX_PATH), sockname.sun_path) != 0) {
+#else
 	if (set_sun_path(port, UNIX_PATH, sockname.sun_path) != 0) {
+#endif
 	    PRMSG (1, "SocketUNIXCreateListener: path too long\n", 0, 0, 0);
 	    return TRANS_CREATE_LISTENER_FAILED;
 	}
     } else {
+#ifdef NX_TRANS_SOCKET
+	sprintf (sockname.sun_path, "%s%ld", _NXGetUnixPath(UNIX_PATH), (long)getpid());
+#else
 	sprintf (sockname.sun_path, "%s%ld", UNIX_PATH, (long)getpid());
+#endif
     }
 
 #if (defined(BSD44SOCKETS) || defined(__UNIXWARE__)) && !defined(Lynx)
@@ -1110,6 +1780,10 @@
     namelen = strlen(sockname.sun_path) + sizeof(sockname.sun_family);
 #endif
 
+#if defined(NX_TRANS_SOCKET) && defined(NX_TRANS_TEST)
+    fprintf(stderr, "SocketUNIXCreateListener: Unlinking path [%s] for ciptr at [%p].\n",
+                sockname.sun_path, (void *) ciptr);
+#endif
     unlink (sockname.sun_path);
 
     if ((status = TRANS(SocketCreateListener) (ciptr,
@@ -1181,9 +1855,15 @@
 #else
 	mode = 0777;
 #endif
+#ifdef NX_TRANS_SOCKET
+        if (trans_mkdir(_NXGetUnixDir(UNIX_DIR), mode) == -1) {
+            PRMSG (1, "SocketUNIXResetListener: mkdir(%s) failed, errno = %d\n",
+            _NXGetUnixDir(UNIX_DIR), errno, 0);
+#else
         if (trans_mkdir(UNIX_DIR, mode) == -1) {
             PRMSG (1, "SocketUNIXResetListener: mkdir(%s) failed, errno = %d\n",
 	    UNIX_DIR, errno, 0);
+#endif
 	    (void) umask (oldUmask);
 	    return TRANS_RESET_FAILURE;
         }
@@ -1962,7 +2642,12 @@
      * we know for sure it will fail.
      */
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+    if (strcmp(host, "unix") != 0 && strcasecmp(host, "nx") != 0 &&
+            strncasecmp(host, "nx,", 3) != 0 && !UnixHostReallyLocal (host))
+#else
     if (strcmp (host, "unix") != 0 && !UnixHostReallyLocal (host))
+#endif
     {
 	PRMSG (1,
 	   "SocketUNIXConnect: Cannot connect to non-local host %s\n",
@@ -1988,7 +2673,11 @@
     
     sockname.sun_family = AF_UNIX;
 
+#ifdef NX_TRANS_SOCKET
+    if (set_sun_path(port, _NXGetUnixPath(UNIX_PATH), sockname.sun_path) != 0) {
+#else
     if (set_sun_path(port, UNIX_PATH, sockname.sun_path) != 0) {
+#endif
 	PRMSG (1, "SocketUNIXConnect: path too long\n", 0, 0, 0);
 	return TRANS_CONNECT_FAILED;
     }
@@ -2006,7 +2695,11 @@
      * This is gross, but it was in Xlib
      */
     old_sockname.sun_family = AF_UNIX;
+#ifdef NX_TRANS_SOCKET
+    if (set_sun_path(port, _NXGetOldUnixPath(OLD_UNIX_PATH), old_sockname.sun_path) != 0) {
+#else
     if (set_sun_path(port, OLD_UNIX_PATH, old_sockname.sun_path) != 0) {
+#endif
 	PRMSG (1, "SocketUNIXConnect: path too long\n", 0, 0, 0);
 	return TRANS_CONNECT_FAILED;
     }
@@ -2014,6 +2707,19 @@
 	sizeof (old_sockname.sun_family);
 #endif
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    if (ciptr->priv != NULL)
+    {
+        if (TRANS(SocketConnectConnInfo) (ciptr, host, port) != 0)
+        {
+            return TRANS_CONNECT_FAILED;
+        }
+
+        goto SocketUNIXConnectPost;
+    }
+
+#endif
 
     /*
      * Do the connect()
@@ -2065,6 +2771,12 @@
 	}
     }
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+SocketUNIXConnectPost:
+
+#endif
+
     /*
      * Get the socket name and the peer name from the connect socket,
      * since this is unix domain.
@@ -2099,6 +2811,58 @@
 {
     PRMSG (2,"SocketBytesReadable(%p,%d,%p)\n",
 	ciptr, ciptr->fd, pend);
+
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    if (ciptr->priv)
+    {
+        if (NXTransRunning(ciptr->fd) == 0)
+        {
+            /*
+             * Force the application to shut down the
+             * socket if the NX transport is gone. We
+             * may probably save this additional call.
+             */
+
+#ifdef NX_TRANS_DEBUG
+            fprintf(stderr, "SocketBytesReadable: NX transport not running for descriptor [%d].\n",
+                        ciptr->fd);
+#endif
+            ESET(EPIPE);
+
+            return -1;
+        }
+        else
+        {
+            /*
+             * Emulate BytesReadable. Some X applications may use the system
+             * select() in their main loop, instead of the _XSelect() that is
+             * replaced by NX. Still these applications use _XEventsQueued to
+             * poll events from the X connection, and _XEventsQueued uses the
+             * NX _XSelect(), so it is generally possible to let the client
+             * yield the control to NX and let it handle the I/O on the proxy
+             * descriptors even if the application is not explicitly designed
+             * to work as a NX agent.         
+             */
+
+#ifdef NX_TRANS_DEBUG
+
+            int result;
+
+            result = NXTransReadable(ciptr->fd, (int *) pend);
+
+            fprintf(stderr, "SocketBytesReadable: Descriptor [%d] result [%d] readable [%ld].\n",
+                        ciptr->fd, result, *pend);
+
+            return result;
+#else
+            return NXTransReadable(ciptr->fd, (int *) pend);
+#endif
+        }
+    }
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
 #if defined(QNX4)
     *pend = 0L; /* FIONREAD only returns a short. Zero out upper bits */
 #endif
@@ -2128,6 +2892,41 @@
 {
     PRMSG (2,"SocketRead(%d,%p,%d)\n", ciptr->fd, buf, size);
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    /*
+     * If we have a valid priv pointer then this
+     * is an internal connection to the proxy.
+     * In this case we should emulate the read.
+     */
+
+    if (ciptr->priv)
+    {
+        int result;
+
+        result = NXTransRead(ciptr->fd, buf, size);
+
+#ifdef NX_TRANS_DEBUG
+        if (result < 0 && EGET() == EAGAIN)
+        {
+            fprintf(stderr, "SocketRead: Read from descriptor [%d] would block.\n",
+                     ciptr->fd);
+        }
+        else
+        {
+            fprintf(stderr, "SocketRead: Read [%d] bytes from descriptor [%d].\n",
+                     result, ciptr->fd);
+        }
+#endif
+        return result;
+    }
+    else
+    {
+        return read (ciptr->fd, buf, size);
+    }
+
+#else /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
 #if defined(WIN32) || defined(__UNIXOS2__)
     {
 	int ret = recv ((SOCKET)ciptr->fd, buf, size, 0);
@@ -2139,6 +2938,8 @@
 #else
     return read (ciptr->fd, buf, size);
 #endif /* WIN32 */
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
 }
 
 
@@ -2148,6 +2949,41 @@
 {
     PRMSG (2,"SocketWrite(%d,%p,%d)\n", ciptr->fd, buf, size);
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    /*
+     * If we have a valid priv pointer then this
+     * is an internal connection to the proxy.
+     * In this case we should emulate the write.
+     */
+
+    if (ciptr->priv)
+    {
+        int result;
+
+        result = NXTransWrite(ciptr->fd, buf, size);
+
+#ifdef NX_TRANS_DEBUG
+        if (result < 0 && EGET() == EAGAIN)
+        {
+            fprintf(stderr, "SocketWrite: Write on descriptor [%d] would block.\n",
+                     ciptr->fd);
+        }
+        else
+        {
+            fprintf(stderr, "SocketWrite: Written [%d] bytes on descriptor [%d].\n",
+                     result, ciptr->fd);
+        }
+#endif
+        return result;
+    }
+    else
+    {
+        return write (ciptr->fd, buf, size);
+    }
+
+#else /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
 #if defined(WIN32) || defined(__UNIXOS2__)
     {
 	int ret = send ((SOCKET)ciptr->fd, buf, size, 0);
@@ -2159,6 +2995,8 @@
 #else
     return write (ciptr->fd, buf, size);
 #endif /* WIN32 */
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
 }
 
 
@@ -2168,7 +3006,28 @@
 {
     PRMSG (2,"SocketReadv(%d,%p,%d)\n", ciptr->fd, buf, size);
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    /*
+     * If we have a valid priv pointer then this
+     * is an internal connection to the proxy.
+     * In this case we should emulate the readv.
+     */
+
+    if (ciptr->priv)
+    {
+        return NXTransReadVector(ciptr->fd, buf, size);
+    }
+    else
+    {
+        return READV (ciptr, buf, size);
+    }
+
+#else /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
     return READV (ciptr, buf, size);
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
 }
 
 
@@ -2178,7 +3037,28 @@
 {
     PRMSG (2,"SocketWritev(%d,%p,%d)\n", ciptr->fd, buf, size);
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    /*
+     * If we have a valid priv pointer then this
+     * is an internal connection to the proxy.
+     * In this case we should emulate the writev.
+     */
+
+    if (ciptr->priv)
+    {
+        return NXTransWriteVector(ciptr->fd, buf, size);
+    }
+    else
+    {
+        return WRITEV (ciptr, buf, size);
+    }
+
+#else /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
+
     return WRITEV (ciptr, buf, size);
+
+#endif /* #if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT) */
 }
 
 
@@ -2234,17 +3114,41 @@
     struct sockaddr_un	*sockname = (struct sockaddr_un *) ciptr->addr;
     int ret;
 
-    PRMSG (2,"SocketUNIXClose(%p,%d)\n", ciptr, ciptr->fd, 0);
+    PRMSG (2,"SocketUNIXClose(%x,%d)\n", ciptr, ciptr->fd, 0);
+
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    if (ciptr->priv)
+    {
+        TRANS(SocketCloseConnInfo) (ciptr);
+    }
+
+#endif
 
     ret = close(ciptr->fd);
 
+#if defined(NX_TRANS_SOCKET) && defined(NX_TRANS_TEST)
+    fprintf(stderr, "SocketUNIXClose: Flags are [%d] for ciptr at [%p] check is [%d].\n",
+                ciptr->flags, (void *) ciptr, (ciptr->flags && sockname
+                    && sockname->sun_family == AF_UNIX && sockname->sun_path[0]));
+#endif
+
     if (ciptr->flags
        && sockname
        && sockname->sun_family == AF_UNIX
        && sockname->sun_path[0])
     {
+#if defined(NX_TRANS_SOCKET) && defined(NX_TRANS_TEST)
+        if (!(ciptr->flags & TRANS_NOUNLINK))
+        {
+                fprintf(stderr, "SocketUNIXClose: Unlinking path [%s] for ciptr at [%p].\n",
+                            sockname->sun_path, (void *) ciptr);
+                unlink (sockname->sun_path);
+        }
+#else
 	if (!(ciptr->flags & TRANS_NOUNLINK))
 		unlink (sockname->sun_path);
+#endif
     }
 
     return ret;
@@ -2263,6 +3167,15 @@
     PRMSG (2,"SocketUNIXCloseForCloning(%p,%d)\n",
 	ciptr, ciptr->fd, 0);
 
+#if defined(NX_TRANS_SOCKET) && defined(TRANS_CLIENT)
+
+    if (ciptr->priv)
+    {
+        TRANS(SocketCloseConnInfo) (ciptr);
+    }
+
+#endif
+
     ret = close(ciptr->fd);
 
     return ret;