/******************************************************************************/ /* * This file is to provide a quick method for most people to change the * behaviour of their Xorg installation without having to fully * understand the workings of site.def and all the various '.cf' files. * * In the vast majority of cases, it should not be necessary to use this * file at all or change it in any way. * * This file is divided into two sections. The first contains settings * that end-users might reasonably change. The second contains settings * that developers might want to change. * * IMPORTANT NOTE: In all cases changing the defaults may cause problems * and/or unexpected side-effects. If you don't understand what a setting * does, then it's best to not change it. If you make changes and have * problems, verify that those problems are also present when using an * empty host.def file and unchanged version of this file before reporting * them. * * A good way to use this file is to copy it to host.def, and make the * changes there. That way, future patches to this file won't fail. * The host.def file will never be patched. * * The distributed version of this file MUST contain no uncommented * definitions. Default definitions belong in xorg.cf, or .cf * files. */ /******************************************************************************/ /* * If you have build-specific modifications in your host.def file, but * want an empty host.def file installed when doing 'make install', * uncomment the following * #define InstallEmptyHostDef */ /* * Which servers to build. There is only Xorg server. * It can be disabled by the following. * #define XorgServer NO */ /* * Set the default server (ie the one that gets the sym-link to "X") * #define ServerToInstall Xorg */ /* * Server configuration parameters. The defaults are shown here: */ /* * Select the XInput devices you want by uncommenting this. * #define XInputDrivers mouse keyboard acecad calcomp citron \ digitaledge dmc dynapro elographics \ microtouch mutouch penmount spaceorb summa \ wacom void magictouch aiptek */ /* * To use the deprecated, old keyboard driver, uncomment this. But * even better, make the new keyboard driver (hw/xfree86/input/keyboard) * work for your architechture. The old driver will be removed in the * next release. * #define UseDeprecatedKeyboardDriver YES */ /* * To build only the servers with a cut-down source tree, uncomment * this. * #define BuildServersOnly YES */ /* * Undefine the following if you don't want to have config files and * app-defaults installed in a separate directory (i.e. /etc/X11). * #define UseSeparateConfDir NO */ /* * Unless you're a developer you shouldn't need to change anything * beyond this point. */ /* * If you want to enable some developer settings, like more verbose * compiler warnings, uncomment this. * #define XFree86Devel YES */ /* * The default optimisation flags for GCC 2.x. -fno-strength-reduce is * here to work around a bug in -O2 for GCC 2.x on i386 platforms. * If you are using a version that doesn't have this bug, you can * uncomment the following line, and remove '-fno-strength-reduce' * If you are building binaries for a 486, it may be beneficial to add * -m486 * #define DefaultGcc2i386Opt -O2 -fno-strength-reduce */ /* * This allows the GCC warning flags to be set. The default is shown here. * #define GccWarningOptions -Wall -Wpedantic -Wpointer-arith -Wstrict-prototypes \ -Wmissing-prototypes -Wmissing-declarations \ -Wredundant-decls -Wnested-externs */ /* * Sun Compiler stuff.. * #define HasSunC YES #define HasSunCplusplus YES #define CplusplusCompilerMajorVersion 5 #define CplusplusCompilerMinorVersion 0 #define CCompilerMajorVersion 5 #define CCompilerMinorVersion 0 */ /* * Optimized Sun Compiler Build. * #define DefaultCDebugFlags -xO4 -xtarget=pentium_pro #define OptimizedCDebugFlags -xO4 -xtarget=pentium_pro */ /* * Debuggable Sun Compiler Build. * Note: This builds _EVERYTHING_ as debuggable * #define DefaultCDebugFlags -g -xs #define OptimizedCDebugFlags -g -xs */ /* * For Linux, this should match the Binutils version you have. This example * is for 2.6.0.7. See linux.cf for the default setting. * * This should automatically get set correctly by imake. * #define LinuxBinUtilsMajorVersion 26 */ /* * For Linux, these should match the libc version you have. This example * is for libc.5.4.x. See linux.cf for the default setting. * * This should automatically get set correctly by imake. * #define LinuxCLibMajorVersion 5 #define LinuxClibMinorVersion 4 */ /* * Some Linux releases don't have a libtermcap. In this case you may need * to uncomment the following * #define TermcapLibrary -lncurses */ /* * Build a server that dynamically loads the modules by setting * this to YES. This defaults to YES on most platforms. A static server * can be built by setting this to NO. * #define DoLoadableServer NO */ /* * This release defaults to building dlopen() style modules instead of the * previously standard loader modules. * * Uncomment the following to return to the XFree86 custom loader modules. * #define MakeDllModules NO */ /* * Build XAA. This can be disabled with: * #define XF86XAA NO */ /* * Build vgahw. This can be disabled with: * #define XF86VgaHw NO */ /* * Build xf1bpp. This can be disabled with: * #define XF1Bpp NO */ /* * Build xf4bpp. This can be disabled with: * #define XF4Bpp NO */ /* * BSD Console driver support (for FreeBSD and NetBSD). * * By default, support is included for pccons and pcvt for NetBSD, and * pccons, syscons and pcvt for FreeBSD. * * To change the list of supported drivers, set the following parameter. * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT. * The following example includes support for syscons and pcvt only. * #define XFree86ConsoleDefines -DSYSCONS_SUPPORT -DPCVT_SUPPORT */ /* * To disable building XInput support, uncomment this * #define BuildXInputExt NO */ /* * Uncomment this for joystick support. * * Note: Joystick support is broken, so don't enable this. * #define JoystickSupport YES */ /* * To disable the ScreenSaver Extension, uncomment this line. * #define BuildScreenSaverExt NO */ /* * If you don't want to build Xinerama support, uncomment this. * #define BuildXinerama NO */ /* * If you don't want to build support for the GLX extension, uncomment this. * #define BuildGlxExt NO */ /* * If you are running NetBSD 0.9C or later, and have the aperture driver * installed, uncomment this. * #define HasNetBSDApertureDriver YES */ /* * If you are running SVR3 and have the mmap driver installed (for linear * framebuffer access) uncomment this. * #define HasSVR3mmapDrv YES */ /* * If you are using an SVR3 (like ISC 4.x) which supports long file names, * you can uncomment this to have manual pages installed under their * full names * #define ExpandManNames YES */ /* * For a POSIXized build on Interactive uncomment this * Could be used with gcc 'till Version 2.6.3 * Should be used with gcc 2.7.2. * #define UsePosix YES */ /* * If you don't want XDMAUTH support (if you don't have Wraphelp.c), * comment this out. * */ #define HasXdmAuth YES /* * If you have Linux DECnet support, and want to build XFree86 with support * for connections over DECnet, uncomment this. * #define HasDECnet YES */ /* * To build static and shared libraries with debugging information, uncomment * this. Assumes you have Gcc2. * (If you don't have Gcc2, you can use the DebugLib{X11,...} variables * to build debugging versions of the libraries separately.) * #define DebuggableLibraries YES */ /* * To forceably build static libraries in addition to shared libraries, * uncomment this. * #define ForceNormalLib YES */ /* * Uncomment this if your default tools (eg, gcc, ld, as, etc) are * not the Linux ELF versions. * #define LinuxElfDefault NO */ /* * To use ELF format shared libraries for supported OSs, uncomment this. * * For Linux the default setting of this is the same as the setting of * LinuxElfDefault. * * For FreeBSD this should automatically be set correctly by imake. Only * change it here if you need to override the automatic setting. * #define UseElfFormat YES */ /* * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install * a.out compatibility libraries. To enable that, uncomment this. * #define BuildAoutLibraries YES */ /* * If you have trouble with make bombing out in Xlib, try uncommenting this. * You will not get dependencies as a result, but better than nothing. * #define MakeHashTableBug YES */ /* * If you do not want your man pages compress under SVR3 systems that * support it, uncomment this. * #define CompressManPages NO */ /* * If you have sgmlfmt (the XFree86 doctools package) and want to build * formatted docs from the SGML source, uncomment this. * #define HasSgmlFmt YES */ /* * To disable building some document formats, uncomment some of these. * #define BuildLinuxDocText NO #define BuildLinuxDocHtml NO #define BuildLinuxDocPS NO */ /* * To install Japanese versions of the documentation uncomment this. * Note: The Japanese documentation consists of a subset of the * XFree86 3.1 docs. * #define InstallJapaneseDocs YES */ /* * To build/install X specs docs, uncomment the following. * The SpecsDocDirs setting here is recommended because it covers * the docs that XFree86 has changed or added. * #define BuildSpecsDocs YES #define SpecsDocDirs CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n */ /* * To build all specs docs, not just those listed in SpecsDocDirs, uncomment * the following. * #define BuildAllSpecsDocs YES */ /* * If your system doesn't support vm86() mode and you have * libx86emu set library path here * #define X86EMU_LIBPATH /usr/local/lib */