/* $XdotOrg: xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_init.c,v 1.9 2005/08/26 07:35:55 daniels Exp $ */ /* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_init.c,v 3.14 2001/10/31 22:50:30 tsi Exp $ */ /* * Copyright 1992 by Orest Zborowski * Copyright 1993 by David Wexelblat * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation, and that the names of Orest Zborowski and David Wexelblat * not be used in advertising or publicity pertaining to distribution of * the software without specific, written prior permission. Orest Zborowski * and David Wexelblat make no representations about the suitability of this * software for any purpose. It is provided "as is" without express or * implied warranty. * * OREST ZBOROWSKI AND DAVID WEXELBLAT DISCLAIMS ALL WARRANTIES WITH REGARD * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND * FITNESS, IN NO EVENT SHALL OREST ZBOROWSKI OR DAVID WEXELBLAT BE LIABLE * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ /* $XConsortium: lnx_init.c /main/7 1996/10/23 18:46:30 kaleb $ */ #ifdef HAVE_XORG_CONFIG_H #include #endif #include #include #include "compiler.h" #include "xf86.h" #include "xf86Priv.h" #include "xf86_OSlib.h" #include "lnx.h" #include #ifdef USE_DEV_FB extern char *getenv(const char *); #include char *fb_dev_name; #endif static Bool KeepTty = FALSE; static int VTnum = -1; static Bool VTSwitch = TRUE; static Bool ShareVTs = FALSE; static int activeVT = -1; static int vtPermSave[4]; static char vtname[11]; static int saveVtPerms(void) { /* We need to use stat to get permissions. */ struct stat svtp; /* Do them numerically ordered, hard coded tty0 first. */ if (stat("/dev/tty0", &svtp) != 0) return 0; vtPermSave[0] = (int)svtp.st_uid; vtPermSave[1] = (int)svtp.st_gid; /* Now check the console we are dealing with. */ if (stat(vtname, &svtp) != 0) return 0; vtPermSave[2] = (int)svtp.st_uid; vtPermSave[3] = (int)svtp.st_gid; return 1; } static void restoreVtPerms(void) { /* Set the terminal permissions back to before we started. */ chown("/dev/tty0", vtPermSave[0], vtPermSave[1]); chown(vtname, vtPermSave[2], vtPermSave[3]); } void xf86OpenConsole(void) { int i, fd = -1; struct vt_mode VT; struct vt_stat vts; MessageType from = X_PROBED; #ifdef USE_DEV_FB struct fb_var_screeninfo var; int fbfd; #endif char *tty0[] = { "/dev/tty0", "/dev/vc/0", NULL }; char *vcs[] = { "/dev/vc/%d", "/dev/tty%d", NULL }; if (serverGeneration == 1) { /* when KeepTty check if we're run with euid==0 */ if (KeepTty && geteuid() != 0) FatalError("xf86OpenConsole:" " Server must be suid root for option \"KeepTTY\"\n"); /* * setup the virtual terminal manager */ if (VTnum != -1) { xf86Info.vtno = VTnum; from = X_CMDLINE; } else { i=0; while (tty0[i] != NULL) { if ((fd = open(tty0[i],O_WRONLY,0)) >= 0) break; i++; } if (fd < 0) FatalError( "xf86OpenConsole: Cannot open /dev/tty0 (%s)\n", strerror(errno)); if (ShareVTs) { if (ioctl(fd, VT_GETSTATE, &vts) == 0) xf86Info.vtno = vts.v_active; else FatalError("xf86OpenConsole: Cannot find the current" " VT (%s)\n", strerror(errno)); } else { if ((ioctl(fd, VT_OPENQRY, &xf86Info.vtno) < 0) || (xf86Info.vtno == -1)) FatalError("xf86OpenConsole: Cannot find a free VT: %s\n", strerror(errno)); } close(fd); } #ifdef USE_DEV_FB if (!ShareVTs) { fb_dev_name=getenv("FRAMEBUFFER"); if (!fb_dev_name) fb_dev_name="/dev/fb0current"; if ((fbfd = open(fb_dev_name, O_RDONLY)) < 0) FatalError("xf86OpenConsole: Cannot open %s (%s)\n", fb_dev_name, strerror(errno)); if (ioctl(fbfd, FBIOGET_VSCREENINFO, &var) < 0) FatalError("xf86OpenConsole: Unable to get screen info %s\n", strerror(errno)); } #endif xf86Msg(from, "using VT number %d\n\n", xf86Info.vtno); if (!KeepTty) { pid_t ppid = getppid(); pid_t ppgid; ppgid = getpgid(ppid); /* * change to parent process group that pgid != pid so * that setsid() doesn't fail and we become process * group leader */ if (setpgid(0,ppgid) < 0) xf86Msg(X_WARNING, "xf86OpenConsole: setpgid failed: %s\n", strerror(errno)); /* become process group leader */ if ((setsid() < 0)) xf86Msg(X_WARNING, "xf86OpenConsole: setsid failed: %s\n", strerror(errno)); } i=0; while (vcs[i] != NULL) { sprintf(vtname, vcs[i], xf86Info.vtno); /* /dev/tty1-64 */ if ((xf86Info.consoleFd = open(vtname, O_RDWR|O_NDELAY, 0)) >= 0) break; i++; } if (xf86Info.consoleFd < 0) FatalError("xf86OpenConsole: Cannot open virtual console" " %d (%s)\n", xf86Info.vtno, strerror(errno)); if (!ShareVTs) { /* * Grab the vt ownership before we overwrite it. * Hard coded /dev/tty0 into this function as well for below. */ if (!saveVtPerms()) xf86Msg(X_WARNING, "xf86OpenConsole: Could not save ownership of VT\n"); /* change ownership of the vt */ if (chown(vtname, getuid(), getgid()) < 0) xf86Msg(X_WARNING,"xf86OpenConsole: chown %s failed: %s\n", vtname, strerror(errno)); /* * the current VT device we're running on is not "console", we want * to grab all consoles too * * Why is this needed?? */ if (chown("/dev/tty0", getuid(), getgid()) < 0) xf86Msg(X_WARNING,"xf86OpenConsole: chown /dev/tty0 failed: %s\n", strerror(errno)); } /* * Linux doesn't switch to an active vt after the last close of a vt, * so we do this ourselves by remembering which is active now. */ if (ioctl(xf86Info.consoleFd, VT_GETSTATE, &vts) < 0) xf86Msg(X_WARNING,"xf86OpenConsole: VT_GETSTATE failed: %s\n", strerror(errno)); else activeVT = vts.v_active; #if 0 if (!KeepTty) { /* * Detach from the controlling tty to avoid char loss */ if ((i = open("/dev/tty",O_RDWR)) >= 0) { ioctl(i, TIOCNOTTY, 0); close(i); } } #endif if (!ShareVTs) { #if defined(DO_OS_FONTRESTORE) lnx_savefont(); #endif /* * now get the VT */ if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) < 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_ACTIVATE failed: %s\n", strerror(errno)); if (ioctl(xf86Info.consoleFd, VT_WAITACTIVE, xf86Info.vtno) < 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_WAITACTIVE failed: %s\n", strerror(errno)); if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) FatalError("xf86OpenConsole: VT_GETMODE failed %s\n", strerror(errno)); signal(SIGUSR1, xf86VTRequest); VT.mode = VT_PROCESS; VT.relsig = SIGUSR1; VT.acqsig = SIGUSR1; if (ioctl(xf86Info.consoleFd, VT_SETMODE, &VT) < 0) FatalError("xf86OpenConsole: VT_SETMODE VT_PROCESS failed: %s\n", strerror(errno)); if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_GRAPHICS) < 0) FatalError("xf86OpenConsole: KDSETMODE KD_GRAPHICS failed %s\n", strerror(errno)); /* we really should have a InitOSInputDevices() function instead * of Init?$#*&Device(). So I just place it here */ #ifdef USE_DEV_FB /* copy info to new console */ var.yoffset=0; var.xoffset=0; if (ioctl(fbfd, FBIOPUT_VSCREENINFO, &var)) FatalError("Unable to set screen info\n"); close(fbfd); #endif } else { /* ShareVTs */ close(xf86Info.consoleFd); } signal(SIGUSR2, xf86ReloadInputDevs); } else { /* serverGeneration != 1 */ if (!ShareVTs && VTSwitch) { /* * now get the VT */ if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) < 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_ACTIVATE failed %s\n", strerror(errno)); } if (ioctl(xf86Info.consoleFd, VT_WAITACTIVE, xf86Info.vtno) < 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_WAITACTIVE failed %s\n", strerror(errno)); } return; } void xf86CloseConsole() { struct vt_mode VT; #if defined(DO_OS_FONTRESTORE) struct vt_stat vts; int vtno = -1; #endif if (ShareVTs) return; #if defined(DO_OS_FONTRESTORE) if (ioctl(xf86Info.consoleFd, VT_GETSTATE, &vts) < 0) xf86Msg(X_WARNING, "xf86CloseConsole: VT_GETSTATE failed: %s\n", strerror(errno)); else vtno = vts.v_active; #endif /* Back to text mode ... */ if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_TEXT) < 0) xf86Msg(X_WARNING, "xf86CloseConsole: KDSETMODE failed: %s\n", strerror(errno)); if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) xf86Msg(X_WARNING, "xf86CloseConsole: VT_GETMODE failed: %s\n", strerror(errno)); else { /* set dflt vt handling */ VT.mode = VT_AUTO; if (ioctl(xf86Info.consoleFd, VT_SETMODE, &VT) < 0) xf86Msg(X_WARNING, "xf86CloseConsole: VT_SETMODE failed: %s\n", strerror(errno)); } if (VTSwitch) { /* * Perform a switch back to the active VT when we were started */ if (activeVT >= 0) { if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, activeVT) < 0) xf86Msg(X_WARNING, "xf86CloseConsole: VT_ACTIVATE failed: %s\n", strerror(errno)); activeVT = -1; } #if defined(DO_OS_FONTRESTORE) if (xf86Info.vtno == vtno) /* check if we are active */ lnx_restorefont(); lnx_freefontdata(); #endif } close(xf86Info.consoleFd); /* make the vt-manager happy */ restoreVtPerms(); /* restore the permissions */ return; } int xf86ProcessArgument(int argc, char *argv[], int i) { /* * Keep server from detaching from controlling tty. This is useful * when debugging (so the server can receive keyboard signals. */ if (!strcmp(argv[i], "-keeptty")) { KeepTty = TRUE; return(1); } if (!strcmp(argv[i], "-novtswitch")) { VTSwitch = FALSE; return(1); } if (!strcmp(argv[i], "-sharevts")) { ShareVTs = TRUE; return(1); } if ((argv[i][0] == 'v') && (argv[i][1] == 't')) { if (sscanf(argv[i], "vt%2d", &VTnum) == 0) { UseMsg(); VTnum = -1; return(0); } return(1); } return(0); } void xf86UseMsg() { ErrorF("vtXX use the specified VT number\n"); ErrorF("-keeptty "); ErrorF("don't detach controlling tty (for debugging only)\n"); ErrorF("-novtswitch don't immediately switch to new VT\n"); ErrorF("-sharevts share VTs with another X server\n"); return; }