ChangeLog: nxcomp-3.2.0-7 - Solved a compilation problem on GCC 4.3. nxcomp-3.2.0-6 - Changes considering that unsetenv() returns void on Mac OS X. nxcomp-3.2.0-5 - Fixed TR03F02024. Assume the launchd unix socket as X socket. - Changed the authorization cookie retrieval when using the launchd socket on MacOSX, in order to wait for the X server start. nxcomp-3.2.0-4 - Fixed TR03F02026. Unset environment variable LD_LIBRARY_PATH before calling the exec function running nxclient. nxcomp-3.2.0-3 - Fix addMsTimestamp() and subMsTimestamp(). Remove the check for a valid input in diffTimestamp() and diffUsTimestamp(). nxcomp-3.2.0-2 - Fixed TR12E01973. Now the correct number of bits are used for the number of points in a X_FillPoly request. nxcomp-3.2.0-1 - Opened the 3.2.0 branch based on nxcomp-3.1.0-6. nxcomp-3.1.0-6 - Always use a timeout of 50 ms to update the congestion counter. nxcomp-3.1.0-5 - Solve the possible deadlock caused by both proxies running out of tokens at the same time. - In ServerProxy::handleCheckDrop() copy the list since the function can delete the elements. nxcomp-3.1.0-4 - Classes ProxyReadBuffer and ServerReadBuffer returned an invalid number of characters to read in the case of a readable() failure. - Connections to proxy versions newer than 3.0.0 were not accepted. - Reading options from file could fail if options contained spaces or other characters interrupting the fscanf()'s matching of input. - The proxy link could not be flushed if a ping request was replied after the end of the read loop. nxcomp-3.1.0-3 - Fixed a compilation warning on GCC 2.95. nxcomp-3.1.0-2 - Solved TR09E01852. Modified the encoding of the number of rects in the XSetClipRectangles request. nxcomp-3.1.0-1 - Opened the 3.1.0 branch based on nxcomp-3.0.0-46. nxcomp-3.0.0-46 - Fixed TR09E01865 and TR08E01831. Assume the old behavior of compr- essing the CUPS, SMB, HTTP and Font channels when connected to an old proxy version. nxcomp-3.0.0-45 - Retry the fork() 30 times, but only on Cygwin (Sob!). nxcomp-3.0.0-44 - In the case of an error, try again to fork() after a second, for a maximum of 5 times. This seems to constitute a valid workaround to the intermittent fork() failures observed on Windows. - Fixed NXTransDestroy() to show the 'broken connection' dialog in the case of a link failure on the client. - Handled the 'terminating' and 'terminated' messages as new proxy stages. - Force all the directories and files created by the library to be readable only by the user. - Don't complain if the shared memory segment can't be initialized on Windows. nxcomp-3.0.0-43 - Prevent the reallocation of the read buffer in the proxy and the agent transport if the buffer was borrowed by an upper layer. - Let the house-keeping process remove the cache directories that are empty and have not be used since more than 30 days. - Added the missing destruction of the ZLIB stream used for image decompression at proxy shutdown. nxcomp-3.0.0-42 - In handleFastWriteReply(), moved the initialization of the 'next' pointer inside the '#ifndef __sun' block. This should fix the re- maining encoding problems on SPARCs. nxcomp-3.0.0-41 - VMWare virtual machines can have the system timer deadly broken. In the case of timeout, try to send a ping regardless we are the client or the server proxy to force a write by the remote. - Removed the messages 'Info: Using image cache parameters...' and 'Info: Using image streaming parameters...' from the session log if the image cache is not enabled. nxcomp-3.0.0-40 - Removed the messages 'Info: Shutting down the NX transport' and 'Info: End of NX transport requested by...' at the session tear down. - Removed the remaining log output. nxcomp-3.0.0-39 - Don't reset the timer on proxy shutdown. nxcomp-3.0.0-38 - Don't reinstall the signal handler if the signal was enabled and the NXTransSignal() action is NX_SIGNAL_FORWARD. nxcomp-3.0.0-37 - Return a congestion level 9 if the agent channel is in congestion state. - Set the idle timeout (used to update the congestion state) based on the link type. The timeout is 0 ms with link LAN and 50 ms in the case of MODEM, with the other values in the between. nxcomp-3.0.0-36 - Changed the encoding of the RenderCompositeGlyphs requests. Use a separate cache for X and Y. Send a single bit for offset X and offset Y if they match the source coordinates. - Always use the memcpy() in the handleFastWrite*() on Sun, as the alternative code doesn't work on SPARC if the buffer is not word aligned. nxcomp-3.0.0-35 - Ensure a smooth transition between different congestion states. If the current congestion counter is greater than the previous, ramp up the value quickly by taking the current counter. If the new congestion counter is less than the previous, ramp down the reported value slowly by calculating the average of the last 8 updates. Reset the congestion counter to 0 if no token reply is pending and the proxy is idle until a timeout. nxcomp-3.0.0-34 - Calculate the current congestion as the average of the last 3 frames sent. nxcomp-3.0.0-33 - When sending a X_RenderCompositeGlyph update, send a single bit if the source X and Y match the values in cache. - Save the check on the bytes readable from the proxy descriptor after the select. nxcomp-3.0.0-32 - Send the X_GetImage replies uncompressed to better leverage the stream compression. - Before entering in congestion state, force a read to see whether the remote proxy aborted the connection. nxcomp-3.0.0-31 - Try to avoid using memcpy() in the channels' handleFastWrite*(). - Changed the copyright notices at the beginning of the files that were referring to NXPROXY to refer to NXCOMP. nxcomp-3.0.0-30 - Set the agent and proxy descriptors as ready, when appropriate, also in the case of an interrupt. nxcomp-3.0.0-29 - On the X server side, read more events from the X server just be- fore and just after having written some data. On the X client si- de, apply the same to the proxy link. - X11 channels originate a congestion control code as soon as the- re is some data left from the previous write. nxcomp-3.0.0-28 - Displaced automatically the "channel unresponsive" and "no data received from remote" dialogs if the error condition is ceased. - Rewritten the channel drain procedure. - Tried a different approach to the channel congestion handling. The X11 channels are not drained after a blocking write but only if a further write is requested and the channel is still in con- gestion state. Benchmarks show that this is still sub-optimal, compared to sending the congestion code immediately also for X11 channels. See the next version. nxcomp-3.0.0-27 - Ignored the agent option 'defer'. - Dropped support for the 1.4.0 versions. - More fixes to support the 1.5.0. nxcomp-3.0.0-26 - The channel read buffer can inherit the data to be encoded from the caller, instead of taking it from the transport. This is le- veraged by the agent channel to save the copy. - Ignored the agent option 'clients'. - Removed the deprecated code checking the CPU limits. - Removed the counters that were duplicated in the Statistics and the Control classes. nxcomp-3.0.0-25 - Improved the effectiveness of the caching of the RenderComposite- Glyphs by using a differential encoding for the length, delta x and delta y of the first string. - Better handle the compatibility between different formats of the cache files. nxcomp-3.0.0-24 - Fixed the compatibility problem with the 1.5.0 versions. - Removed the constants NXDisplayReadable, NXDisplayFlushable and NXDisplayCongestion. Now nxcompext has three distinct functions. nxcomp-3.0.0-23 - Removed support for Rdp, Tight and Hextile packed images decod- ing since they have been made obsolete by the new NX server. - Use the value 0 for the action is_hit and 1 for is_added. This increases the frequency of zeroes in the encode buffer, giving better compression. - Changed the copyright attribution from Medialogic to NoMachine. nxcomp-3.0.0-22 - Implemented an alternate encoding reducing the size of the int caches to 16 elements and transmitting the values in blocks of 4 bits. Although this encoding reduces the effectiveness of the differential compression, it allows better compression of the final stream, resulting in a 10% to 20% gain in all condi- tions. The new encoding is experimental, as it would make the 3.0.0 incompatible with all the previous NX versions. Use this package as a reference for future implementations. nxcomp-3.0.0-21 - Encode the first two coordinates of a FillPoly message by using a differential encoding, thus the origin of the polygon is not included in the checksum. This is aimed to work in combination with the agent converting all the FillPoly requests to the rela- tive coordinate mode. - Add the coordinate mode to the checksum of the PolyPoint and Po- lyLine messages so that it doesn't need to be encoded separately. - Disable the streaming for all messages. This saves the encoding of a boolean for each message that could potentially be streamed. - Don't try to match the block size when encoding a value based on an IntCache. This saves the additional bool in 90% of the cases. - Removed support for the former RDP and RFB session types. - Due to the above changes, this version is incompatible with the previous 3.0.0 releases. nxcomp-3.0.0-20 - Added support for the 'lossy', 'lossless' and 'adaptive' pack me- thod literals. These values activate the dynamic selection of the pack method by the agent. - Made the 'adaptive' pack method the default for all link types. - The default stream compression level is now 6 for link type ISDN, 4 for ADSL and 1 for WAN. The default data compression level is always 1, except for LAN that is 0. nxcomp-3.0.0-19 - Print in the session log the X11 display that the proxy is imper- sonating or where it is forwarding the connections. nxcomp-3.0.0-18 - Implemented decoding of the PACK_BITMAP_16M_COLORS pack method. This is a very simple encoder removing the 4th byte in 32 bits- per-plane images. This encoder is intended to better leverage the stream compression on low bandwidth links. - Removed the code cleaning the padding bytes in RenderAddGlyphs and RenderCompositeGlyphs as the operation is now performed in Xrender. - Removed the "Info: Synchronizing local and remote caches." and "Info: Using remote server '...'." lines from the session log. nxcomp-3.0.0-17 - Determine the CPU endianess at compile time only on Linux and Cygwin. nxcomp-3.0.0-16 - Optimized the memory allocation of the ReadBuffer classes. The buffers from the Transport classes are used, when possible, to avoid the copy. nxcomp-3.0.0-15 - Reworked the code dealing with the channel congestion control messages for increased efficiency. - Removed the pending_ flag from the proxy and channel class mem- bers. If needed, the classes will query the transport buffers to see whether there is data pending. - Removed the additional parameter from NXTransFlush(). - The proxy doesn't issue anymore a sync control message on a X reply. Anyway it will respond to the request for compatibility with older versions. - Removed the dynamic selection of the encoding method for the X_QueryColors request and X_ListFonts, X_QueryColors, X_Query- Font replies. Now all of them use the differential encoding to better leverage the stream compression. - Fixed to build on SUNs where we don't have endian.h. nxcomp-3.0.0-14 - When handling partial proxy messages, don't try to determine how many bytes still need to be read if the ZLIB stream compression is enabled. - If a message can't be located, the ReadBuffer class checks if it is possible to consume the data already in the transport buffer. - Optimize the MD5 routines by determining the CPU endianess at compile time. - Force Drawable and GContext to be CARD32 in NXproto.h. nxcomp-3.0.0-13 - Changed the semantic of the NXDisplayFlushHandler callback. The function is called when new data is sent to the remote proxy or, with a 0 length, upon receiving a new token reply, so that the agent can update its congestion state. - Added the NXTransCongestion() function. It returns a value bet- ween 0 and 9 indicating the congestion level based on the tokens remaining. A value of 9 means that the link is congested and no further data can be sent. - Removed the congestion and synchronization callbacks. They are superseded by the new NXTransCongestion() implementation. nxcomp-3.0.0-12 - Send the token replies at the end of the encode loop instead of flushing the buffer immediately. - Fixed TR05E01687. Correctly detect CTRL-ALT-SHIFT-ESC keystrokes. - Renamed the option 'block' as 'tile'. - Ignored the option 'menu', targeting the X11 agent. nxcomp-3.0.0-11 - Removed the 'interactive' attribute from generic channels. We now use the 'prioritized' attribute which yields the same result. - Simplified the channels' read loop by always reading only once. - The channels flush the link as soon as the token is exceeded even if the flush policy is set to deferred. - Reserved more cache memory for the images when running a shadow session. nxcomp-3.0.0-10 - Added the NXDisplayWriteHandler callback definition. - Removed the code that forced the proxy to retain in the cache the images referenced at session startup. - Disabled the persistent image cache since this is not supported by the current agent. This will save the overhead caused by the image house-keeping process. nxcomp-3.0.0-9 - Fixed a cast problem in GetBytesReadable(). nxcomp-3.0.0-8 - Added the NXTransTime() utility. It return the time in milliseconds elapsed since the last call to the same function. Useful for bench- marking the Xlib layer. - Ignored the option 'block' targeting the X11 agent. nxcomp-3.0.0-7 - Ignored the options 'shadow', 'shadowmode' targeting the X11 agent. - Added the session type 'shadow'. nxcomp-3.0.0-6 - Fixed TR08D01484. Fixed a bug in the cleanup of the RenderAddGlyphs messages. We clean up only the glyphs with depth 8, width greater than 1 and pixmap byte pad 4. - Added file COPYING. nxcomp-3.0.0-5 - Updated the copyright notices to the current year. nxcomp-3.0.0-4 - Imported changes up to nxcomp-2.1.0-6. - Fixed TR12D01563. Changed the configure script to always build the library with the -fPIC option. This is related to the way SELinux works. - Fixed the dependency from local endianess for 16-bit color RDP un- packing functions. This caused wrong colors to be displayed when the proxy and the X server were running on two separate machines having different endianess. - Fixed TR10D01523. The Channel::handleDrain() method now accounts for the fact that agent connections can't be drained. - Changed the Tight and Hextile decoding functions to use the X ser- ver's byte order. nxcomp-3.0.0-3 - Changed the main loop to handle the 3.0.0 version. nxcomp-3.0.0-2 - Updated the file VERSION. nxcomp-3.0.0-1 - Opened the 3.0.0 branch based on nxcomp-2.0.0-81. nxcomp-2.0.0-81 - Fixed the dependency from local endianess for JPEG and PNG decomp- ression functions. This caused wrong colors to be displayed when the proxy and the X server were running on two separate machines having different endianess. - Fixed the number of entries in the handleColormap() function. nxcomp-2.0.0-80 - Fixed TR06D01404. Removed the warning issued when calling the AgentTransport::drain() method. nxcomp-2.0.0-79 - Updated copyright to year 2006. nxcomp-2.0.0-78 - Fixed a bug in the cleanup of the RenderAddGlyphs messages. - Minor improvements to the encoding of the RenderCompositeGlyphs and RenderComposite requests. - Added 'client' to the list of the ignored options. nxcomp-2.0.0-77 - Added cleanup of the padding bytes in the RenderCompositeGlyphs and RenderAddGlyphs requests. nxcomp-2.0.0-76 - Before adding the frame's bytes to the tokens, the frame length is normalized based on the stream compression ratio of the last frame sent. This avoids entering the drain loop too early when the data is highly compressible. - Moved the render messages' private data in a union to reduce the footprint of the render store. nxcomp-2.0.0-75 - The action performed on the remote message store and the affected position are encoded as a single value. This saves approximately 1 bit per each message. - Created more Compat classes to handle the backward compatibility with the 1.4.0 and 1.5.0 versions. nxcomp-2.0.0-74 - Added support for the RLE pack method and made it the default if the selected link type is LAN. - Removed the legacy support for the 'render' option provided at X server side. - When defining LAME in ClientChannel.h, the channel has the chance of suppressing more opcodes by the handleTaintLameRequest() call. This is for test purposes. nxcomp-2.0.0-73 - The X_NXSetUnpackColormap and X_NXSetUnpackAlpha now carry their data in compressed form. The alpha data is compressed using the ZLIB RLE encoding, while the colormap data is compressed using the default ZLIB deflate. - Thanks to the above changes, ZLIB data compression of all messa- ges which do not have a specific encoding is turned off, so that we can make better use of the final stream compression. - Created new message structures to handle the compatibility with the old proxy versions. When connected to an old proxy version the agent should use the NXSetUnpackColormapCompat() and NXSet- UnpackAlpha() interfaces. nxcomp-2.0.0-72 - Solved a compatibility problem with the 1.X.X versions due to the new render encodings. nxcomp-2.0.0-71 - Improvements to X_RenderSetPictureClipRectangles. - Fixed handleUnpack() to pass the correct byte order parameter to to the unpack alpha function. - Added the --parent parameter to the client even in pulldown mode. - Fixed a deallocation bug in StaticCompressor. nxcomp-2.0.0-70 - Added compression of X_RenderSetPictureFilter, X_RenderSetPicture- Transform, X_RenderTrapezoids and X_RenderTriangles. nxcomp-2.0.0-69 - Changed the format of the persistent cache to accomodate the new encoding of the render opcodes. Caches from the 1.4.0 and 1.5.0 should be still loaded and saved correctly when connected to and old version of the library. - Improved the encoding of the X_CreatePixmap, X_ChangeGC, X_Render- CompositeGlyphs, X_RenderComposite, X_RenderCreateGlyphSet, X_Rend- erFreePicture and X_RenderCreatePicture messages. Added new classes to handle the backward compatibility. - Made the static compression and decompression code reside in the same class. nxcomp-2.0.0-68 - Improved the encoding of the X_RenderCreateGlyphSet and X_Render- FreeGlyphSet requests. nxcomp-2.0.0-67 - Modified the following session messages: From: "Session: Session starting at..." To: "Session: Starting session at..." From: "Session: Session terminating at..." To: "Session: Terminating session at..." - Improved the encoding of the requests creating or freeing an XID. This affects X_CreateGC, X_CreateWindow, X_CreatePixmap, X_Render- CreatePicture, X_FreeGC, X_DestroyWindow, X_FreePixmap, X_Render- FreePicture. - Added 'streaming' and 'backingstore' to the list of options used by agents. - Modified the info messages to print the ZLIB compression paramet- ers to be more compact and only use two lines. nxcomp-2.0.0-66 - When part of an agent, the proxy will wait for the NXTransDestroy() function to initiate the shutdown. nxcomp-2.0.0-65 - Starting from this version the NX client can control the behaviour of the client proxy by monitoring the messages marked as "Session". At the early initialization the proxy will print: "Session: Session starting at '...'. The ellipsis here represent the current timestamp, as reported by the POSIX function ctime(): Once the session is running, the proxy will print: "Session: Session started at '...'. At the time the session is being shut down, the proxy will print: "Session: Session terminating at '...'. Followed by: Session: Session terminated at '...'. The message "Info: Starting X protocol compression." is removed, replaced by the message 'Session started at...' with the same meaning. Once the message 'Session: Session terminated at..." is read from the output, the client can optionally wait for the proxy process to complete and terminate with an exit code 0. - The "Session" messages are not printed when the proxy is running on the NX server side, as part of an agent. nxcomp-2.0.0-64 - Reduced the default token limit from 32 to 24. The synchronizat- ion callback is triggered by the tokens going below half the li- mit. nxcomp-2.0.0-63 - Added -I/usr/include/c++ to makedepend. nxcomp-2.0.0-62 - The house-keeping process is now started upon the initialization, if the memory cache is enabled, and, on the X server side, when the remote actually requested access to the image cache. nxcomp-2.0.0-61 - Added a NX_HANDLER_SYNCHRONIZATION callback to NXTransHandler(). The handler is called when the agent can use the available band- width to synchronize X objects that are corrupted or incomplete. The reason can be: NX_SYNCHRONIZATION_BEGIN: The synchronizationis is allowed. NX_SYNCHRONIZATION_END: The synchronizationis must stop. The reason can be determined by agents by using the NXBeginSynch- ronization and NXEndSynchronization values defined in NXvars.h. - Bytes from 14 to 24 in the X_NXGetControlParameters reply report, respectively, the frame timeout, the ping timeout, the preferred image split mode and the split size threshold. nxcomp-2.0.0-60 - The following messages used by the NX client and server have been changed. The NX client and server should be modified accordingly. From: "Info: Shutting down the link and exiting." To: "Info: Shutting down the NX transport." From: "Info: End of session requested by remote proxy." To: "Info: End of NX transport requested by remote" From: "Info: End of session requested by agent termination." To: "Info: End of NX transport requested by agent." From: "Info: End of session requested by signal '...'." To: "Info: End of NX transport requested by signal '...'." From: "Info: Shutting down the link and exiting." To: "Info: Shutting down the NX transport." From: "Info: Waiting for cleanup timeout to complete." To: "Info: Waiting the cleanup timeout to complete." From: "Info: Waiting for watchdog process to complete." To: "Info: Waiting the watchdog process to complete." nxcomp-2.0.0-59 - Added more debug information regarding the timing of packets sent and received. - Added the possibility to redirect the log output to a file that can be later shared with nxssh running in "binder" mode. This is useful when testing the forwarding of the SSHD connection by nxssh to the agent. Activated by defining BINDER in Loop.cpp. nxcomp-2.0.0-58 - Fixed the unpack alpha procedure to only rely on the image's byte order. - Solved the X_PutImage encoding problem introduced in the 2.0.0-56 version and restored the compatibility with the 1.5.0 version. nxcomp-2.0.0-57 - Added a NXTransFile() function. It returns the name of the files used by the proxy for the current session. The type parameter can be: NX_FILE_SESSION: Usually the file 'session' in the user's session directory. NX_FILE_ERRORS: The file used for the diagnostic output. Usually the file 'errors' in the session directory. NX_FILE_OPTIONS: The file containing the NX options, if any. NX_FILE_STATS: The file used for the statistics output. The returned string is allocated in static memory. The caller must copy the string upon returning from the function, without freeing the pointer. - Fixed the PANIC in the handling of the abort split messages. - The encode and decode routines may write one byte past the nominal end of the encode buffer. This additional byte is now included in the payload. This is actually a bug, but harmless. nxcomp-2.0.0-56 - Added the X_NXAbortSplit request. It can be used to interrupt the streaming of all the messages currently in the split store for the specified resource. Depending if the split store did or did not contain split messages, the client will receive an immediate end-split or no-split notification. - Removed the split modes NXSplitModeEager and NXSplitModeLazy. The available modes are now NXSplitModeSync and NXSplitModeAsync. The mode NXSplitModeAsync replaces the two old modes and is now the default. Similarly to NXSplitModeEager, it makes the proxy split only messages that exceed a size threshold, but the threshold is generally smaller than in the previous versions. #define NXSplitModeDefault 0 #define NXSplitModeAsync 1 #define NXSplitModeSync 2 - Renamed X_NXSplit to X_NXSplitData, X_NXAbortSplit to X_NXSplitEv- ent. - The proxy now enters a drain loop, when in congestion state, and waits until the decongestion. Also the X channels are drained if blocked. - The select is restarted immediately if only the proxy is selected and the data read doesn't make a complete message. - The size of the shared memory segment used by the X server proxy is now negotiated at startup and the selected value is printed in the session log. - Added the option 'encrypted'. It tells the local proxy if it is running as part of a program providing encryption of the point to point communication. This is useful to determine if the proxy can block waiting for data or needs to yield to the client to let it handle the remote connection. nxcomp-2.0.0-55 - Fixed handleRestart() to correctly send the end-split event only after the split sequence has been closed by the client. - Fixed a possible memory error in the Keeper class occurring if the image caches were erased while in the middle of a loop. nxcomp-2.0.0-54 - Added a '--parent' option when running the client in dialog mode. This is the process id that needs to be signaled in the case the user chooses to do so. nxcomp-2.0.0-53 - Solved a bug in the abort split procedure. The procedure assumed that the split had to be at the head of the list. This may not be the case if the split was loaded from disk asynchronously, after a different split with the same checksum was recomposed. - By defining STRICT in Loop.cpp, the number of available tokens is set to 1. This can be used to trigger the congestion more often than it would possible when testing the software with the default settings. - Added more debug output to the procedures handling the streaming of the images. - Reset the channel's split pending and congestion flags in the fin- ish procedure. Not doing so caused some additional loops at chan- nel shutdown. - Fixed a bug on Cygwin that prevented the log files to be succes- sfully reopened when the size limit was exceeded. - Failures to write to the agent transport are reported sooner when the channel is finished. This saves a few more loops at session shutdown. nxcomp-2.0.0-52 - Started implementing a new handler to let the agent include arbit- rary data in the transport statistics. The parameter, in this case, is a pointer to a pointer to a null terminated string. The pointer is set at the time the handler is registered. The pointed string will have to be filled by the agent with its statistics data. For now, only the interfaces and the stubs exist. - Disabled the timestamp cache as it still causes rounding problems when calculating the current bitrate. nxcomp-2.0.0-51 - Removed SelectPackMethod(), not used anymore, from Pack.c. nxcomp-2.0.0-50 - Added the X_NXFinishSplit request. It forces the proxy to comple- tely transfer all the split messages for the given resource, and then notify the agent. - Fixed the statistics to not account the split bits to the control token. nxcomp-2.0.0-49 - Fixed a bug that caused the split timeout to be reset even if a different channel had splits to send. - Removed an error condition that arose when a split operation was requested by a different channel than the first to connect. The reason is that an auxiliary channel (like the one created by the server to store the keyboard configuration) can be the first to open a connection to the X server, then can come the agent, that is actually using the NX opcodes. The proxy will now simply print a debug message. - Removed a further error condition that was assumed by the proxy if a pending flush was detected while no channel was selected for output. This can actually happen if the channel was dropped and, in the meanwhile, the user requested the proxy statistics. nxcomp-2.0.0-48 - Added a 'type' parameter to NXTransFlush(). The new NX_FLUSH_IDLE type should be used by agents when they have finished handling all their clients and are going to wait for more input. This is the case, for example, of the X agent returning from WaitForSomething() after having set a small timeout to find out if there are clients ready, or the case of a RDP agent finding that there are no opcodes to read from the RDP server. The 'idle' flush should be requested also when the X11 agent is waiting for a split to complete. When the flag is used, the proxy uses the available bandwidth to encode more low-priority data, like the payload of images being streamed. nxcomp-2.0.0-47 - Added a new RGB image encoder. For now the encoder uses a static Z stream to compress the image data in the destination buffer and allows the agent to use the simplest encoding by still separating the alpha channel from the image data. The new encoder can be the the base for implementing color reduction by dithering or a color- mapped translation of the image similar to PNG, but without the PNG overhead and with the colormap being sent to the client using the NXSetUnpackColormap() opcode. - Put the routines implementing static deflating and inflating of a ZLIB buffer from the Compressor and Decompressor classes to Z.h and Z.cpp, so that they can be reused by the new RGB encoder. nxcomp-2.0.0-46 - Fixed a segfault arising when trying to start a child without the NX transport. nxcomp-2.0.0-45 - Undefined the MATCH directive. nxcomp-2.0.0-44 - Changed the encoding of the X_CreatePixmap, X_CreateGC, X_Render- CreatePicture, X_CreateWindow, RenderCreateGlyphSet.cpp. The Xid of the drawable is included in the checksum of the X_CreateGC and X_CreatePixmap message. This leverages the way GC and Pixmaps are allocated in the X agent to obtain better compression. - Removed the code handling the reset of the proxy connection. This functionality was unused since when the persistence is handled by the agent. - Added a specific section in the statistics output for the render extension. nxcomp-2.0.0-43 - Fixed a bug that could have caused the sending of multiple 'end split' messages for the same split sequence. - Added handling of the option 'strict'. nxcomp-2.0.0-42 - Added a missing channel switch directive when encoding abort split messages at the server side. This could cause a decoding error on the client. nxcomp-2.0.0-41 - Ensured that the link is flushed immediately on the X server side when important keyboard or mouse activity is detected in input. - Implemented a timestamp cache to avoid calling gettimeofday() when it is enough to use the last timestamp gotten from the system. The cache can be disabled by undefining CACHE_TIMESTAMP in Timestamp.h. nxcomp-2.0.0-40 - Added the karma delay field to the X_NXGetControlParameters reply. - Solved a bug with the decoding of split messages likely to happen only when using link type LAN. nxcomp-2.0.0-39 - Implemented separate flow control for the generic channels and the image streaming data. - Improved the split procedure to load a message from the disk cache if found after it was originally discarded because locked. nxcomp-2.0.0-38 - Renamed the 'shmem' option as 'shseg'. The 'shmem' option becomes specific to the agent and will be used together with 'shpix' option to indicate if, respectively, the shared memory extension and the use of the shared pixmaps must be enabled in the agent server. The new option will be instead used by the proxy to determine the size of the memory segment shared between the proxy and the X server. - Added the 'shmem', 'shpix', 'keyboard' and 'clipboard' to the list of ignored options. The 'keyboard' option should become a synonym of 'kbtype'. The 'clipboard' option will tell the NX agent if the clipboard support should be disabled for security reasons. nxcomp-2.0.0-37 - Ensured that, when running a raw session, the persistent cache is loaded and saved only once in the session lifetime. - Added the 'product' keyword to the list of recognized options. The option is ignored by the proxy, but can be used by the client or server to facilitate the support. nxcomp-2.0.0-36 - Added the remote version number in the X_NXGetControlParameters reply. - Solved a bug related to the removal of the split stores. - Removed the unused code dealing with the flush timeouts. nxcomp-2.0.0-35 - Added an alert to notify the user about the failure of the XDMCP session. nxcomp-2.0.0-34 - The active channels and the agent resources are now stored in a list container. - Added the X_NXFreeSplit request. The request is currently unused because the split store is freed automatically when it becomes empty, but can be useful in future if we want to implement other otpimizations. nxcomp-2.0.0-33 - There is now a split store for each agent resource. This allows the proxy to divide the bandwidth among the agent resources. - A simple round-robin load-balancing is implemented, dividing the bandwidth equally among all the split stores. - If there is a previous request being streamed for the same res- ource, cached messages are appended to the split store and then committed in the original order. This makes possible to stream the colormap and the alpha channel data even if the split invol- ves multiple PutImage or PutPackedImage operations in a single start-split/end-split sequence. - Implemented the commit store class. Made the commit store expand the message in the final buffer, instead of leveraging the mes- sage store. - Channels having a drop command pending are checked before trying to load or save the cache. This prevents a potential problem with the protocol violation error that could be reported by the client side proxy. - The current bitrate is now calculated at the time the transport actually writes the data to the network, not at the time the data is appended to the transport by the upper layers. The reason is that the data can be compressed by the stream compressor and so we can calculate the real bitrate only after having flushed the ZLIB stream. This fixes the wrong numbers that could be reported by the statistics in the previous versions. nxcomp-2.0.0-32 - More progress in the implementation of the new image streaming. This version has been tested to work when connecting to an 1.5.0 server. Due to the significant changes in the way the streaming works in the newer versions, split is never activated by a 2.0.0 server connecting to a 1.5.0 client. - Fixed the NXTransClose() function to check if the fd matches the NX agent connection. - Fixed the includes in Socket.h to compile on Solaris and MacOSX. nxcomp-2.0.0-31 - Changed the NX transport functions that didn't require a NX fd parameter to include one. The value can be NX_FD_ANY to signify any running NX transport. nxcomp-2.0.0-30 - More progress in the new implementation of image streaming. - This version is apparently compatible with the 1.5.0 client but needs further testing. nxcomp-2.0.0-29 - Implemented the NXTransHandler() interface and made the proxy use the callback, when it is installed, instead of the notifi- cation events. - Modified the agent transport to report an EOF condition as soon as the channel is dropped, instead of reporting the error only after the proxy shutdown. This allows the agent to handle its clients while the proxy is handling the grace timeout. - Added a test facility to verify if the client and server caches match at shutdown. - More advances in the new implementation of streaming. nxcomp-2.0.0-28 - Made the session shutdown faster, normally below 1 second. The grace time is now 500 ms once all channels have been dropped. nxcomp-2.0.0-27 - The house-keeping process will now run a number of iterations (currently 100) and then will exit. The proxy will check the exit code and, if it was requested by the child, will restart it. This is intended to keep the memory consumption low, as I noted that after a big number of iterations the performance of the allocator start to degrade quickly. nxcomp-2.0.0-26 - Started implementing the NXTransHandler() interface to let the X application hook a callback and be notified by the proxy when an event occurs. At the moment only congestion events are supported. The interface makes possible for the caller to provide a generic parameter. This parameter is passed back to the handler function. The parameter is expected to be the Xlib display pointer, given that the proxy doesn't have access to the Xlib structures. - Moved all the internal variables shared between Xlib, nxcompext and the X server in nxcomp. Declarations and function prototypes moved to NXvars.h. - Removed the NXGetCleanupParameters() and NXGetImageParameters() interfaces and the remaining references to the unused display buffer and image cleanup functions. - In this version the images streaming functionality is disabled. Because of that, expect compatibility problems when connecting to a different nxcomp version. nxcomp-2.0.0-25 - Forced the end of the session earlier if a shutdown has been re- quested by the local side but the remote proxy is not responding. nxcomp-2.0.0-24 - Changed the loop deleting the file items in Keeper to pick the first element instead of looping through the iterator. - More problems with the libstdc++ allocators. During the tests, I found that the Keeper class can leak industrial amounts of memory. Valgrind says that the objects that are not freed are the File items we allocate in collect(). As this looked suspicious, I log- ged the constructors and destructors and can say that everything is OK on our side. Unfortunately, by removing the spleeps used to let the program work silently in background, one can find that the memory occupation still grows by a MB every few seconds. This is less a problem on Windows, where the memory occupation remains almost constant. See the comment on __USE_MALLOC below. - Increased the maximum size of a message that the proxy is allo- wed to cache to 4MB. This makes possible to cache many replies (like the X_QueryFont replies) that often exceeded the previous limit. nxcomp-2.0.0-23 - Fixed a compatibility problem with the 1.5.0 that arose when encoding an image with caching and streaming temporarily disa- bled. - Removed the __USE_MALLOC define in Types.h because this is what the g++ developers want. I'll try to avoid flames and will not comment on this. - Added a --with-use-malloc configure option. This option should be used when building the release packages on GCC versions that support it. - Started fixing the commit procedure to be able to deal with the alpha channel. nxcomp-2.0.0-22 - Prevented channels from being dropped while in the middle of a read loop. - Added a small utility ensuring that the SIGCHLD we receive in the main loop can be always identified as pertaining to an our child. - Increased the space available for the control messages at the beginning of the encode buffer and ensured that there is always enough space for adding a token message, in the case this is required by the flush procedure. - Made all cache files readable only by the user. nxcomp-2.0.0-21 - Solved a bug in the streaming of images that caused the agent's clients to never resume when connected to an old proxy version. nxcomp-2.0.0-20 - Disabled again streaming of the alpha channel data. By enabling it, the agent randomly fails to repaint the exposed regions. The reason is to be investigated. nxcomp-2.0.0-19 - Implemented the split mode NXSplitModeSync. When this mode is selected, the proxy will not send data for the split at the head of the list until the remote peer has confirmed that the message is not available in the image cache. This is going to be useful in combination with the lazy encoding. - Improved the error detection in the case of failure when saving a recomposed split on disk. - Added X_NXSetUnpackAlpha to the set of requests that is possible to stream. nxcomp-2.0.0-18 - Enabled the 2.0.0 features that were disabled for test purposes. - Changed the LICENSE file to state that the software is only made available under the version 2 of the GPL. nxcomp-2.0.0-17 - Introduced a new channel of type 'slave'. Opening a slave channel should let the proxy fork a new NX client instance (or whatever is in the NX_SLAVE environment) and pass to it the channel's desc- riptors. This client instance should authenticate the peer, for example using the proxy cookie (see how this is implemented in nxsensor) and then negotiate the service to be used on the channel. This can be used to implement forwarding of arbitrary ports or ad- ditional services, like a simple file transfer protocol. For now the implementation is incomplete. Opening a slave channel will result in the remote proxy just dropping the channel connection. - The proxy is forcibly flushed at the end of each loop. This is a temporary fix until the agents are updated to flush the proxy link on demand. - Added a new alert to be used in the case the RDP session is closed and replaced with a new session using the same Windows account. - Added a forward declaration of class RenderMinorExtensionStore in file RenderExtension.h to compile using gcc 4.0.X. - Added removal of all .orig file when running a 'make clean'. - The code uses again the 2.0.0 style shutdown (the one waiting for the watchdog process to terminate). nxcomp-2.0.0-16 - Added the NXTransChannel() interface to allow agents to create new channels connected to the port that will be forwarded by the remote proxy. The function returns 1 on success, 0 if the NX transport is not running, or -1 in the case of error. On success, the descriptor provided by the caller can be used for all the subsequent I/O, including selecting the descriptor to check if I/O is possible. The type parameter not only tells to the proxy the remote port where the channel has to be connected, but gives a hint about the type of data that will be carried by the channel, so that the proxy can optimize the compression and schedule the traffic on the slow link. The type can be: NX_CHANNEL_X: The channel will carry X traffic and it will be connected to the remote X display. NX_CHANNEL_CUPS: The channel will carry CUPS/IPP protocol. NX_CHANNEL_SMB: The channel will carry SMB/CIFS protocol. NX_CHANNEL_MEDIA: The channel will transport audio or other multimedia data. NX_CHANNEL_HTTP: The channel will carry HTTP protocol. NX_CHANNEL_FONT: The channel will forward a X font server connection. Only the proxy running at the NX server/X client side will be able to create a X, CUPS, SMB, MEDIA and HTTP channel. A proxy running at the NX client/X server side can create font server connections. The channel creation will also fail if the remote end was not set up to forward the connection. To create a new channel the agent will have to set up a socket- pair and pass to the proxy one of the socket descriptors. Example: #include #include int fds[2]; if (socketpair(PF_LOCAL, SOCK_STREAM, 0, fds) < 0) { ... } else { // // Use fds[0] locally and let the // proxy use fds[1]. // if (NXTransChannel(fds[1], NX_CHANNEL_X) <= 0) { ... } // // The agent can now use fds[0] in // read(), write() and select() // system calls. // ... } Note that all the I/O on the descriptor should be non-blocking, to give a chance to the NX transport to run in the background and handle the data that will be fed to the agent's side of the socketpair. This will happen automatically, as long as the agent uses the XSelect() version of the select() function (as it is normal whenever performing Xlib I/O). In all the other cases, like presumably in the agent's main loop, the agent will have to loop through NXTransPrepare(), NXTransSelect() and NXTrans- Execute() functions explicitly, adding to the sets the descript- ors that are awaited by the agent. Please check the implementa- tion of _XSelect() in nx-X11/lib/X11/XlibInt.c for an example. nxcomp-2.0.0-15 - Some changes aimed at finding a workaround to the unreliability of the font server connections. The X server seems to be really picky about the network latency, so we try to read immediately from the channel just being created, instead of waiting for a new loop. Additionally the proxy will keep reading from the font server connections even after the maximum length of the frame is exceeded, in the hope that it will be able to send a complete message in a single frame. - updated the various internal consistency tests run when the TEST or INFO flags are enabled. nxcomp-2.0.0-14 - It seems that the closure of the socket sometimes takes several seconds, on Windows, after the connection is broken, with the result that the alert can be shown long after the user has gone after the failed session. We now skip the closure of the proxy link on Windows if we are about to exit. - The code uses the 1.5.0 style shutdown (the one waiting for the term signal in the main process) to be able to test the library with the old server. To activate the new shutdown procedure be sure the define SHUTDOWN_COMPATIBLE_1_5_0 is unset. nxcomp-2.0.0-13 - Ensured that static members in channels are reset at the time a new proxy is created. - Adjusted the token parameters for link modes other than modem. nxcomp-2.0.0-12 - Handled compatibility with 1.X.X versions not sending the count field in the token. - The proxy link is now flushed automatically if the agent has not set the deferred flush mode. nxcomp-2.0.0-11 - Significant modifications to allow the proxy to keep data in the encode buffer across multiple loops, until the data is flushed because an explicit request by the agent or. Besides maximizing the amount of data sent in a single frame, this makes it possi- ble to move any packet coalescence strategy in the agent, while still using an 'immediate' flush policy. - Modified the procedure handling the proxy congestion. Each token now carries a counter which represents the multiple of TokenBytes data bytes that need to be confirmed by the remote end. The ser- ver side proxy will need to reply by including the value of the counter. When sending a new token, the tokens are decremented by the counter and the client side proxy enters in congestion when the available tokens becomes zero or negative. nxcomp-2.0.0-10 - Implemented specific encoding of the X_NXSetCacheParameters request. - Handled the compatibility with older versions not supporting the new request. In this case the request is handled at the local si- de, preventing the X requests to be cached or split, even without the cooperation of the remote side. nxcomp-2.0.0-9 - Modified the shutdown procedure to not rely on the TERM signal when the proxy needs to wait for the server to complete. We will now print the following message in the session log: Info: Watchdog running with pid 'n'. Info: Waiting for watchdog process to complete. The NX server will have to kill the process with the given pid to mandate the proxy shutdown. This solves the TR11C01192. - Added the X_NXSetCacheParameters request. It tells to the proxy how to handle caching of X requests, namely if requests should be stored in the memory cache, split in smaller data chunks and, in the case of images, saved on disk in the persistent image cache. The request affects all the X messages until the proxy is further configured. - Enabling and disabling loading and saving of persistent images due to a X_NXSetCacheParameters is still to be implemented. - Implemented font channel compatibility with older versions. If the font port is queried and the remote proxy doesn't support the tunneling of font server connections, an empty string is returned. - The option 'resize', used by agents, is now silently ignored. This solves the TR10C01061. - Added the missing reference to TR08C000981. nxcomp-2.0.0-8 - Discarded the first idea of setting the font path implicitly in the X server side proxy, by means of a multi-pass operation and added the NXGetFontParameters() request and reply. If the proxy has been configured accordingly, the request returns the X font path that can be set by the agent to tunnel the font server con- nections through the NX link. - Changed the parsing of the font server port to be able to handle the defaults. nxcomp-2.0.0-7 - More work on tunneling of font server connections. - The synchronization requests are now replied at the same time as a new request is received, by checking if the channel has already gone past the awaited sequence number. This avoids the delay caused by the previous versions in the case the expected reply had been handled asynchronously, inside the write loop. nxcomp-2.0.0-6 - The display is again passed to the client using the -display parameter. - The option 'type' is now ignored at X server side. Support at the X server side had been left for compatibility with older versions of the proxy. - Added direct support for more session types, namely 'unix-cde', 'unix-xdm', 'unix-console', 'unix-default'. The 'unix-console' and 'unix-default', similarly to 'unix-application', will now trigger the 'raw' mode. nxcomp-2.0.0-5 - Renamed Png.h and Png.cpp to Pgn.h and Pgn.cpp to avoid name clashes on Windows. - The distclean target now removes the autom4te.cache directory. nxcomp-2.0.0-4 - Added the 'kill=n' option to let the proxy add the process to the list of daemons that must be terminated at session shutdown. Multiple 'kill=n' options can be specified. The proxy will send to each process a SIGTERM signal before exiting. - Removed the code that forcibly disabled the RENDER extension on Solaris. Eventual compatibility problems will be now handled in the NX agent. - The path to the client executable is now assumed to be in the NX_CLIENT environment. If the variable is not set, the proxy will guess the location based on the target platform. This is part of the FR11C01215. nxcomp-2.0.0-3 - More code cleanup. Protocol step 5 and cache step 2 are assumed by default. This allows us to remove the various channel caches that are not used anymore. - Removed the outdated encodeBegin() and encodeEnd() methods. nxcomp-2.0.0-2 - Added compatibility with the 1.5.0 and 1.4.0 versions. Protocol version older than the 1.4.0 will cause the proxy to drop the connection. - Rewritten the version negotiatiation logic to better handle the compatibility between the local and the remote version. - Removed the conditional code handling the compatibility with the protocol encodings from 1 to 4. - Small adjustments to the session negotiation procedure to give more hints in the case of errors. A dialog is now issued if the remote proxy drops the connection due to a probable authentica- tion failure or when the remote proxy version is not compatible with our version. nxcomp-2.0.0-1 - Opened the 2.0.0 branch based on nxcomp-1.5.0-80. nxcomp-1.5.0-80 - Fixed a bug that prevented the Unix socket to be created in the right directory. This affected the ability of the server to run NX sessions without the agent encoding. nxcomp-1.5.0-79 - Solved a bug in the 15 to 16 bpp conversion for RDP sessions. - Corrected a typo in the PANIC message of Unpack16To24 function. - Optimized the 16 bpp RDP decompression routine. nxcomp-1.5.0-78 - Implemented the FR11C01215. The following environment variables are checked to determine the location of the relevant NX direct- ories: $NX_ROOT The root NX directory is the place where the session directory and the cache files are created. This is usually overridden by passing the 'root=' option. By default, the root NX directory is assumed to be the directory '.nx' in the user's home. $NX_SYSTEM The directory where NX programs and libraries reside. If not set, the value is assumed to be '/usr/NX'. Programs, libraries and data files are respectedly searched in the 'bin', 'lib' and 'share' subdirecto- ries. $NX_HOME The NX user's home directory. If $NX_ROOT is not set or invalid, the user's NX directory is created here. $NX_TEMP The directory where the X11 Unix Domain Sockets and all temporary files are to be created. $NX_CLIENT The full path to the nxclient executable. If the va- riable is not set, the nxclient executable will be run assuming that the program is in the system path. This can be useful on platforms like Windows and the Mac where nxclient is located in a different direct- ory compared to the other programs, to make easier for the user to execute the program from the shell. Other environment variables: $HOME The variable is checked in the case $NX_HOME is not set, null or invalid. $TEMP The variable is checked whenever the $NX_TEMP direct- ory is not set, null or invalid. $PATH The path where all executables are searched, except nxclient. If $NX_CLIENT is not set, also the client executable is searched in the system path. $XAUTHORITY This is the file containing the X11 authorization cookies. If not set, the file is assumed to be in the user's home (either $NX_HOME or $HOME). $LD_LIBRARY_PATH System-wide library search order. This should be set by the program invoking the proxy. - Extended the usage message to document the relevant environment. - Made the WaitChild() function interruptible. This allows the user to terminate the connection procedure immediately, by sending a signal to the proxy process while an abort dialog is shown in the foreground. This is part of the solution to the TR11C01216. - Implementation of the FR11C01215 is not yet complete. The client program and the nxauth/xauth are still searched using the previ- ous logic. In particular, the NX_CLIENT variable is ignored. nxcomp-1.5.0-77 - Corrected the typo in the alert dealing with VNC authentication failures. This solves the TR11C01199. nxcomp-1.5.0-76 - Added the missing initialization in the client and server proxy constructors. nxcomp-1.5.0-75 - Starting from this version the build procedure will automatically create a DLL on Windows. - Disabled exceptions in the compiled code. - Disabled run-time type information to further reduce the size of the executable. - Compiling with GCC 4.0.0 and -fno-exceptions produces a warning in some files, due to control apparently reaching the end of a non void function. This is bogus and has been confirmed to be a GCC 4.0.0 bug solved in more recent versions. nxcomp-1.5.0-74 - Imported changes from nxcomp-1.6.0-4. - Solved a compilation error on Solaris and MacOSX platforms. - The 'font' option now accepts either a numeric value (for a TCP port) or a 'unix/:port' or 'tcp/:port' specification. In the case of Unix ports, we assume that a port specification "unix/:7100" corresponds to the "/tmp/.font-unix/fs7100" socket and a port like "unix/:-1" corresponds to "/tmp/.font-unix/fs-1". - An absolute file path is also accepted as a valid socket. This is useful to test the forwarding of the font server connection, for example by running a normal X client and pointing the socket to the X server. - Protocol step 7 is now only assumed when connecting to a remote proxy version 1.6.0 or later. nxcomp-1.5.0-73 - Use the include files from nx-X11 if the nx-X11/include directory is found. The previous configure checked the presence of nx-X11/ exports/include, that might not be built at the time this library is compiled. nxcomp-1.5.0-72 - Fixed a problem on AMD64 due to the size of the area pointed by the argument of NXTransReadable(). The ioctl() requires a pointer to an int, at least on Linux. The original _X11TransBytesReadable() function simply calls the ioctl() by passing the pointer that is provided. Returning the value assuming a pointer to a long crashes some applications, among them xterm. Now NXTransReadable() follows the same schema of the ioctl() call and stores the result assuming a pointer to an int. nxcomp-1.5.0-71 - Ensured that the NX trasport is destroyed on NXTransExit() even if the parent has overridden our signal handlers. - Added attribute 'noreturn' to NXTransExit(). - Small change to the shutdown procedure to send the "Waiting for a further signal" just after the watchdog is started. nxcomp-1.5.0-70 - Added the definition of protocol step 7. The new protocol step is implicitly assumed when activating the font server channel, so that NX clients and servers may decide what to do by verifying the patch version of the peer software. This makes possible to activate the feature without stepping up the 1.5.0 version of the software. nxcomp-1.5.0-69 - Added the -fPIC GCC flag when compiling on AMD64 architectures. - Small changes to configure.in to have specific CFLAGS. - Created a new configure using autoconf 2.59. - Added the 'mask=n' option to determine how channel ids are distri- buted between client ans server. By default, channels whose ids are multiple of 8 (starting from 0) are reserved for the client side. All other channels can be allocated at the NX server side. - A check is missing on the protocol supported by the remote side, so it is likely that mixing this version with older 1.5.0 will not work. - The release has the debug logs enabled. nxcomp-1.5.0-68 - Added provision for opening new channels on both client and server side. This required small changes to the way channel ids are mapped and retrieved, so that both sides now support bidirectional mapping of file descriptors to channels. - Made the code handling allocation of new generic channels to reside in the base Proxy class. nxcomp-1.5.0-67 - Renamed the 'embedded keyboard' channels as 'aux' channel. - Renamed 'samba' channels as 'smb'. - The 'samba' and 'smb' options can now be used interchangeably. The same applies to the 'keybd' and 'aux' options, used to set up the auxiliary X channel. - Added a new font channel. The channel is used to forward X font server connections from the X server on the NX client to the remote NX server. The channel is not yet functional and requires change to the channel allocation mechanism. - Added a common interface to create new listening sockets. This is currently used for additional services, but not for the X display sockets. - Simplified the interface used to accept new connections to channels being forwarded. - Removed the -V option as nxproxy is not using dlopen() anymore. - Removed the inclusion of ClientChannel.h in Proxy.cpp that caused test symbols to be reverted to undefined. nxcomp-1.5.0-66 - Made failures setting the IPTOS_LOWDELAY on the proxy socket to cause a warning, instead of an error. - Made the clean target delete the Cygwin specific libraries. - Updated the configure and Message.h to deal with GCC 4. Solves the TR08C000981. nxcomp-1.5.0-65 - Removed the warning issued on parsing the agent option 'rootless'. Solves the TR08C00959. - MacOSX 10.4 defines socklen_t. Made the definition conditional so that we can still support older versions. Solves the TR07C00926. - Updated the ChangeLog to include references to the solved TRs. nxcomp-1.5.0-64 - Imported the 1.6.0 changes in the maintenance 1.5.0. - Removed a wrong assertion that might cause the session to fail when the software was compiled with TEST enabled in Proxy.cpp. - The nxclient dialog process is signaled with SIGKILL on Windows, as the SIGTERM is ignored. This solves the TR07C00929. - Ensured the JPEG error flag is always set before jumping out of the Jpeg decompression. - Skipped errors encontered setting the TCP_NODELAY flag on Mac. Solves TR08C00940. - Few cosmetic changes. nxcomp-1.5.0-63 - Ensured that the parent is checked often in the keeper process, so that, in the case of a premature death, the child is exited earlier. nxcomp-1.5.0-62 - Some performance tuning of the LAN and WAN link modes. nxcomp-1.5.0-61 - Fixed the problems arisen with loading or saving the image files on Windows by forcing the streams to be opened in binary mode. These problems have been triggered by the recent Cygwin upgrade. - Removed the logs that had be left enabled for test purposes. nxcomp-1.5.0-60 - Made all errors encountered while unpacking an image just print a warning in the session log. Such errors are not fatal but the client monitors the state of the session at startup, so that by marking image decompression errors as such may cause the session to be aborted. - Marked as warnings also errors encountered by trying to load an image from disk. nxcomp-1.5.0-59 - When detected, the CTRL+ALT+SHIFT+ESC sequence is removed from the event stream. - Also modified the message in the session log to issue a warning, instead of an error. nxcomp-1.5.0-58 - Added a setjmp() before yielding the control to the JPEG library. This makes possible to recover from the JPEG decompression errors that were previously fatal. - In the commit split request, the client id is now encoded by the client channel beside the propagate flag. The client id is igno- red by the decoding party. As in the old protocol versions, the committing client is taken from the client id that was originally sent together with the packed image. - Fixed the compilation problem when defining OPCODES in Misc.cpp. - Skipped the synchronous flush of the proxy link when connecting to a previous NX version. - Ensured that the new alerts are only requested when connected to a compatible proxy. - Ignored the option 'fullscreen', targeting the agents. nxcomp-1.5.0-57 - Added more alerts and changed the name of those dealing with the resume of a session. - Added the MIXED define. When set, the proxy will let all logs go to the standard error. This is useful to interleave the Xlib log output with the proxy output in a single file. - Added a new alert to report an I/O error at agent reconnection. This is one of those alert that can't be actually shown, but are included to offer a consistent view to the agent implementation. nxcomp-1.5.0-56 - Added the split mode NXSplitModeSync. By selecting this mode, the proxy will try to empty the split store immediately, until all messages marked in such mode will be synchronized. The im- plementation is left to future versions. #define NXSplitModeSync 3 - Added the messages specific to RDP and VNC sessions in NXalert.h. Included are also a few alerts related to changes to the color depth and desktop geometry that may be eventually mandated by the remote server. - Corrected a typo in NXalert.h nxcomp-1.5.0-55 - Added the 'mode' field in the X_NXStartSplit request. It determi- nes the strategy that the proxy will adopt to handle the image. If set to 'eager', the proxy will only split the messages whose size exceeds the split threshold (the threshold can be found in the X_NXGetControlParameters reply). If mode is set to lazy, the proxy will split any image that it is not able to find in its cache. The opcode and the two available modes are defined in NXproto.h, currently: #define NXSplitModeDefault 0 #define NXSplitModeEager 1 #define NXSplitModeLazy 2 - All requests related to image streaming now carry a 'resource' id. The id is currently ignored by the proxy in the case of X_NXCom- mitSplit requests. - Added a new NXSetSplitMode() request. It determines the strategy that the proxy will adopt to stream the images. If set to 'eager' the proxy will only split the messages whose size exceeds the split threshold, otherwise it will split all the images, regard- less their size. This is in preparation of the lazy encoding in agent. - Slightly decreased the startup timeout compared to the value it had in the 1.4.0. This timeout is used to retain the images used during session startup in the persistent cache. nxcomp-1.5.0-54 - Modified the text of the begin-reconnection alert to mention the speed of the connection detected by the agent. nxcomp-1.5.0-53 - Reworked the handling of the abort-split events issued by the re- remote proxy so that we now finalize the procedure and restart the client asynchronously, in the middle of the write loop. nxcomp-1.5.0-52 - Rewritten the internal interface to the notification events. There are now five different split notification events: NXNoSplitNotify The operation didn't cause any actual split. The client can be immediately restarted. NXStartSplitNotify A split is ongoing. The client should be suspended until the end of the split. NXCommitSplitNotify A complete request has been recomposed. The client can commit the given request to the X server. NXEndSplitNotify The split operation was duly completed. The client can be restarted. NXEmptySplitNotify No more split operation are pending. The agent can use this information to implement specific strategies, requiring for example that all messages have been recomposed at the remote end. This can include updating the drawables that were not synchronized because of the lazy encoding. - Removed the X_NXSync and X_NXKarma operations, not used anymore by the NX agents. - Increasing or decreasing a timeout makes it respectively equal to the base timeout or to the base timeout / 4. nxcomp-1.5.0-51 - Improved the mechanism by which synchronization replies are sent to the X client proxy. - Using the leftPad field as passed by the nxagent 1.5.0-58 doesn't seem to work with the MIT-SHM. The workaround is to disable the MIT-SHM operation in the case of 1 bpp images. - Removed the limitation on the size of the shared memory segment that had been introduced for test purposes. nxcomp-1.5.0-50 - Solved compilation problem when --with-info was not given. nxcomp-1.5.0-49 - Improved support for color matching from 15 and 16 bpp to 24 and 32 bpp in RDP sessions. - Solved TR05C00910. This was about "shadows" that might appear in RDP sessions when small elements like tooltips were drawn. nxcomp-1.5.0-48 - Added a 'commit' field in X_NXCommitSplit request. When zero, the X server side proxy will unlock the message in the message store, without actually committing the image to the X server. The new field required changes to the encoding. This means that this ver- sion is not compatible with older 1.5.0 nxcomp releases. - Added a new control message. This is used by NXTransFlush() to for- ce a roundtrip between the proxies and speed-up the handling of the synchronous replies. nxcomp-1.5.0-47 - Made the timeouts dynamic, based on the user input and the current bitrate. - Set the available tokens to 8. This allows for 16 KB to be sent on a modem before having to wait for a reply. - Added provision for removing a dialog on the remote end. This can be used, for example, to get rid of a message that was displayed by the agent at the beginning of a lengthy operation. - Fixed a fault that arose when trying to run the proxy on a display whose name began with the 'nx' string. - Running a client or server session on a display host beginning with 'nx' should be now possible. - Flush is now always immediate when there is already data queued in the TCP socket. nxcomp-1.5.0-46 - Created the NXalert.h header from Alert.h to share the alert codes with the agents. The new NXTransAlert() interface can be used to start an alert on the remote side. - Created the NXTransParse*() and NXTransCleanup() wrappers. - Temporarily using the single-dash style when passing parameters to nxclient until the double-dash style is fixed. nxcomp-1.5.0-45 - Motion events are now flushed at the time the X server channel is sending the token reply. - Renamed NXDialog() to NXTransDialog() and added a window ID parame- ter, to be used by the agent when starting the "pulldown" dialogs. - Also renamed the other NX utility functions. nxcomp-1.5.0-44 - Solved a bug that prevented auxiliary X connections from working with the agent. - Added the missing check on the proxy pointer in HandleTimer() as it may be actually called before the proxy is created. nxcomp-1.5.0-43 - Started tuning the performance. For now, the available tokens are set to an improbable value of 10000. nxcomp-1.5.0-42 - Disabled the X server side remote expose events for test purposes. This is intended uncover the display problems introduced by the new handling of exposures in the X11 agent. - Fixed some timestamp related functions to avoid rounding problems. - Moved the timestamps of split, frame and flush from the Control to the Proxy class. - Made the X server side proxy to skip updating the counters related to token management. - Made also the X server side use deferred flushes. - Modified handleFrame() to manage both pings and data frames and send the token before the actual write operation. - Cleaned the pseudo-files used to load the control parameters. - Cleaned up the FIXME's in the lower layers. More FIXME's remain in the frontend classes. - Added a further counter to the statistics tracking the number of network writes performed on the proxy link. nxcomp-1.5.0-41 - Now the watchdog process doesn't kill the parent. The termination event is determined by monitoring the child. This is advisable to avoid interfering with the signal handling in agent. - The house-keeping process is not started if differential compres- sion (and thus caching of images) is disabled. - Wait for the watchdog to terminate before starting the house-keep- ing process. - Fixed the problem of gray stripes in white areas when using 15bpp RDP compression. This solves the TR06C00916. - Added a log in Message.cpp to tell when an image is removed from the memory cache. - Removed most of the logs. Only left the logs directly related to the deferred flushes. - Removed a warning due to a missing definition in NX.h. nxcomp-1.5.0-40 - Added the signal '12' to the set of blocked signal on Cygwin. This is what is delivered to the application when it tries to create a shared memory segment when the cygserver is not running. The call later returns "Operation not implemented", only useful if you have survived to the signal. - Modified the configure script to not link against cygipc. - Improved error handling in the negotiation phase. - Reset the last signal received when aborting a connection attempt. Not doing that might cause a warning. nxcomp-1.5.0-39 - Both channels and proxy can now deal with incomplete messages by waiting for the full data to become available. This is not going to work when the transport is connected to an agent that is run- ning in-process, so the timeout must be really small. - Made the main loop more compact by letting a single function read from proxy and channels. The same change applies to writing to descriptors that are reported to be ready. - Optimized the loop to report as ready the agent descriptors that have become available after the proxy execution phase. - Now the proxy will try to asynchronously read from its descriptor after having read from the channel. - Unified the routine setting the routines setting the read and write descriptors and the timeouts. - Unified the routine handling the channel events. - Reintroduced the last ping timestamp to avoid sending more than a single ping every PingTimeout milliseconds. - The cleanup procedure now waits for the watchdog and house-keeping processes to terminate. - Reverted the change occurred in 1.5.0-35 about the byte-ordering problem in decompression of PNG and JPEG images. - More coding about deferred flushes. - Relevant debug logs are enabled in the main loop, in the proxy and in the channel classes, so use only for testing. nxcomp-1.5.0-38 - Started the implementation of deferred writes based on the new NX transport. - Solved a problem with the statistics file affecting the Windows platform. Basically it seems that Cygwin or the stdc++ library don't deal correctly with files that are reopened just after having unlinked them. - Implemented support for 15 bpp RDP bitmaps. - Added "rdpcolors" and "rdpcache" to the list of parameters that are ignored in ParseEnviromentOptions(). - This version has lot of logs enabled and some forced cleanups in the case of unexpected conditions. Avoid to use it for long-last- ing test sessions. nxcomp-1.5.0-37 - Now splitting of images is fully disabled when running with link LAN. Previously the split was not executed by the proxy, but the agent was configured to send the start/end sequence. - Added the check protecting the proxy from token underflow. In the previous code the check was left out to verify the conditions un- der which this event might be encountered. - NXTransWrite() and NXTransWriteVector() allocate a context before calling handleRead(), so they can correctly return in the case of a cleanup. nxcomp-1.5.0-36 - Modified the channel write loop to interleave abort split events between the writes to the X server socket. nxcomp-1.5.0-35 - Solved a byte-ordering problem in decompression of PNG and JPEG images. - Changed the handleToken() interface to make explicit if a token must be issued because of a ping. - Small fix to prevent a warning in Jpeg.cpp when TEST is enabled. nxcomp-1.5.0-34 - Solved a few problems introduced by the rewrite of the read loops in channels. - Added definition of NXCollectInputFocusNotify. nxcomp-1.5.0-33 - Implemented a new control flow system based on tokens exchanged bet- ween the proxies. When the clint side runs out of tokens it stops sending data until a new token is returned. Tokens are sent whenever the data written to the socket exceeds the amount of data set for a scheduled write, so the proxy is free to send a number of smaller frames before running out of tokens. - The reason the new system is introduced is because the old method had two outstanding problems: - It worked very well when the proxies were directly connected, but couldn't reliably detect a link congestion when tunneled over SSH. - In the attempt of reducing the data queued to the TCP layer, it didn't leverage all the available bandwidth. - Moved the final check on the state of the session at the end of execution stage, instead of the beginning. The signals sent by the user to request the statistics could be reset before the proxy had entered the right procedure. - Added the session type 'unix-rootless', to be used for single apps run with the agent in rootless mode. nxcomp-1.5.0-32 - Modified the main loop to skip the select when I/O is possible on any of the agent descriptors or the proxy link. - Now the house-keeping process is allocated in the heap instead of the stack. nxcomp-1.5.0-31 - The server channel now performs asynchronous reads from the display by interleaving them with data decoded from the remote proxy. - Improved the handling of the memory-to-memory transport. nxcomp-1.5.0-30 - Redesigned the handling of the congestion events to work more re- liably and to report the events to the remote peer earlier. - Increased the size of the shared memory segment when the MIT-SHM extension is activated. - Solved a bug that prevented the ping timeout to work as expected. - Ensured that, when entering the main select(), neither the chan- nels or the proxy have pending messages in the read buffers. - There is now only a single case where we can have pending messa- ges, namely in the handling of the MIT-SHM events. - Solved a bug introduced by the 1.5.0-29 that made the proxy en- ter the select with a null timeout. - Renamed LINK_TYPE_AUTO to LINK_TYPE_NONE in NXproto.h. nxcomp-1.5.0-29 - Now encoding data from the agent descriptors happens in the same context as data is written to the buffer. - Optimized the handling of the congestion events to avoid running further unneeded loops. - Added timer handling utilities. nxcomp-1.5.0-28 - Added code providing information about the reason of the failure encountered connecting to the local X server. This greatly helps when troubleshooting X authorization problems. - On connection failure a warning message is printed in the session log. - Removed the warning that was previously printed when the MIT-SHM extension failed to be initialized on Windows. Shared memory has problems on Cygwin and it currently doesn't work in NXWin. - Reworked the message printed in the case of link failure. nxcomp-1.5.0-27 - Solved a bug in the connection procedure introduced by 1.5.0-25. nxcomp-1.5.0-26 - Transformed the errors printed on failure of the fork() creating the children into warnings. This can happen quite often on Win- dows, due to well known Cygwin problems. See also the ChangeLog entry for nxcomp 1.4.0-28. This patch closes the TRSL052278 but it's obviously not a long-term solution. - Set the sticky bit when creating the '/tmp/.X11-unix' directory. - Modified the Makefile.in to remove the *.out.* files generated by Valgrind. - Updated the README files. nxcomp-1.5.0-25 - Changed the directory where the client for the Mac is searched if it is not found in the system path. - Modified Auth.cpp to use nxauth also on the Mac. - Reworked the procedure showing the alert dialog when a timeout is encountered in the initial connection. - Removed the experimental code from the official 1.5.0 branch. nxcomp-1.5.0-24 - Implemented more experimental classes. nxcomp-1.5.0-23 - Added the NX_SIGNAL_FORWARD action to NXTransSignal(). This can be used to let the proxy call the original signal handler of the agent after having blocked the signal. nxcomp-1.5.0-22 - Ensured that we always have a context, even before creating the transport. - Suppressed the error message printed when passing the -h option. - Added the experimental code that is currently under development. nxcomp-1.5.0-21 - Enabled the fake X cookie authentication. This requires checking the remote proxy version to verify that the server supports the new authorization mechanism. - It's worth noting that the X client side proxy doesn't care which cookie is sent over the connection. The problem is that clients connecting to 1.4.0 servers don't have a method to force the ser- ver to use the fake cookie. This means that we have to solve the problem by letting the proxy check the remote version so that it can omit to replace the cookie when connecting to older servers. nxcomp-1.5.0-20 - Added the NXTransCongestion() function. It returns true if proxy is in congestion state. - Removed an incorrect warning that was printed when calling force() for the memory-to-memory transport. The agent could actually re- quire multiple loops to read all data queued for it. nxcomp-1.5.0-19 - Small optimization in NXTransReadable() to run a new NXTransConti- nue() loop only after at least RetryTimeout milliseconds are pas- sed since the last call and still no data is available. This cuts the number of unneeded loops to 1/4th of the total, probably more, on faster machines. - Added NXCollectGrabPointerNotify to NXproto.h. nxcomp-1.5.0-18 - Minor changes to NXTransContinue(). nxcomp-1.5.0-17 - Moved respawning of a new nxclient instance in the cleanup procedu- re. This ensures that the respawn is executed whatever is the rea- son of the session shutdown. - Added a method to force closure of a given channel in proxy. - Removed code handling the special case triggered on Windows by the presence of a NX_SESSION variable in the environment. nxcomp-1.5.0-16 - Added the NXTransSignal() function to let agents tell to the proxy how to handle the standard POSIX signals. Given the SIGINT signal, for example, the caller can specify any of the following actions. NX_SIGNAL_ENABLE: A signal handler will have to be installed by the library, so that it can be intercepted by the proxy. NX_SIGNAL_DISABLE: The signal will be handled by the caller and, eventually, forwarded to the proxy by calling NXTransSignal() explicitly. NX_SIGNAL_RAISE: The signal must be handled now, as if it had been delivered by the operating system. This function can be called by the agent with the purpose of propagating a signal to the proxy. As a rule of thumb, agents should let the proxy handle SIGUSR1 and SIGUSR2, used for producing the NX protocol statistics, and SIGHUP, used for disconnecting the NX transport. - The following signals are blocked by default upon creation of the NX transport: SIGCHLD These signals should be always put under the control SIGUSR1 of the proxy. If agents are intercepting them, agents SIGUSR2 should later call NXTransSignal(..., NX_SIGNAL_RAISE) SIGHUP to forward the signal to the proxy. SIGINT These signals should be intercepted by agents. Agents SIGTERM should ensure that NXTransDestroy() is called before exiting, to give the proxy a chance to shut down the NX transport. SIGPIPE This signal is blocked by the proxy, but not used to implement any functionality. It can be handled by the NX agent without affecting the proxy. SIGALRM This is not blocked by the proxy, but could be used in future. SIGVTALRM These signals are not used and should not be used in SIGWINCH future versions of the library. SIGIO SIGTSTP SIGTTIN SIGTTOU - By calling NXTransSignal(..., NX_SIGNAL_DISABLE) nxcomp will res- tore the signal handler that was saved at the time the proxy hand- ler was installed. This means that you should call the function just after the XOpenDisplay() or any other function used to init- ialize the NX transport. nxcomp-1.5.0-15 - In NXTransContinue(), if the transport is gone, return immediately, that is without having to wait until the NXTransSelect() timeout. - Ensure that NXTransCreate() has a jump context, just in the case a subsequent operation would cause a cleanup. nxcomp-1.5.0-14 - Solved a problem with requests left in the agent's buffer when run- ning the NX transport. The agent could have enqueued data to our side and checked the available events but requests could not be written to the proxy because proxy might not have had a chance to enter a new select. We found that this behaviour was triggered by _XEventsQueued, so now a new loop is forced when agent is calling _X11TransDataReadable. The procedure can be optimized, by avoiding an expensive loop when no critical I/O is pending. - Added a few additional logs to ClientChannel and ServerChannel. nxcomp-1.5.0-13 - Added the code handling the special cases of an user not specifying a proxy cookie or the case of the X authorization file not contain- ing a value matching the display. In the first case we'll forward the same cookie that was feeded to the proxy, in the second case we will forward to the X server a random generated cookie, similarly to what SSH does in this same condition. - Rewritten the command line parser. Removed all the command line options parsed on behalf of nxproxy except: -C Specify that nxproxy has to run on the "X client" side, listening for connections and impersonating an X server.\n\ -S Specify that nxproxy has to run in "X server" mode, thus forwarding the connections to daemons running on the client.\n\ -V n.n.n Request nxproxy to load the given nxcomp version. This option is only present on Solaris and Linux. -v Print version information. host:port Put at the end, specifies the host and port of the listening proxy. value=name Set the NX option to the provided value. Multiple NX options can be specified in the DISPLAY environment or on the command line, by using the nx/nx,name=value notation. - The above information is printed on the console when incurring in a parse error, together with a list of the available option=value parameters. - Renamed the 'log' option to 'errors'. This makes sense as the de- fault name for the log file is actually 'errors'. - Now the "Established X server connection" message is printed to the session log only after the X connection has passed the X auth- entication phase. This means that the NX client should become able to show the details of the session log whenever the session fails due to a cookie problem. - When selecting the additional services without specifying a port, the client proxy will now automatically forward the connections to the corresponding well-known ports of the CUPS, SMB and HTTP servi- ces. Embedded X keyboard connections will be automatically forward- ed to the same display port used to connect to the X server. The user will still have to specify the port to be used for the media connections as we don't have a suitable well-known port. - Starting from this version, connections to the keybd port will cre- ate real X connection channels. This is required to let connections leverage the fake authorization cookie. - By testing the forwarding of keybd connections I found that, when letting X clients connect to the port, it is required to provide the X cookie for the unix display. Adding only the TCP cookie will not work. For example, by creating a cookie as in: xauth add localhost:2009 MIT-MAGIC-COOKIE-1 6f...f4 And running: xterm xterm -display localhost:2009 You will get the following error: Xlib: connection to "localhost:2009.0" refused by server Xlib: No protocol specified Adding also the unix cookie will fix it: xauth add localhost/unix:2009 MIT-MAGIC-COOKIE-1 6f...f4 This seems to be a Xlib problem, with Xlib trying to get the cookie for the UDS port even if the TCP port was requested by the user. - Fixed a bug that prevented the nxclient dialog to be displayed when the session was abruptedly shut down. - Fixed the compilation error on Apple MacOSX due to the sa_restorer field in sigaction. As long as this field is present on Linux we will keep following the safer route and will set it explicitly to NULL. - Included what needs to be included in Process.cpp to compile with older gcc. nxcomp-1.5.0-12 - Implemented a replacement for the popen() and pclose() that do not rely on a shell to run the command. They were required on Windows, where we don't ship a suitable shell in the install. - Removed code forcing the PATH to include the bin directory on Windows. nxcomp-1.5.0-11 - Forced Auth.cpp on Windows to have the directory containing the nxauth executable in the PATH. This is just for testing, until nxclient is fixed. - Fixed compilation errors on Cygwin and Sun. - Removed the NX_FORCE_* stubs. nxcomp-1.5.0-10 - Modified the memory management policies in ReadBuffer to fit all the available bytes in a single buffer allocation. - The locateMessage() methods now give hints on the amount of data that has to be read. - The read loop in channel now doesn't yield in the case of prio- ritized messages. This is experimental. - Removed the check on isTimeToYield() between encodings of multi- ple messages. This is aimed at reducing the risk of leaving pen- ding messages in channels. - Modified the channels' read loop to always read all the available data. - Disabled the log output that was selected when compiling with the configure option --with-info. This leaves space for other log out- put to be selected for more up-to-date scopes. - Implemented the NXTransReadVector() and the NXTransWriteVector() functions to replace READV() and WRITEV(). - Implemented memory-to-memory communication between the agent and the NX proxy by making use of the NXTransAgent() interface in the nx-X11/lib/X11/Xtranssock.c file. - Added a check in NXTransSelect() for the EBADF and, on Solaris, the EINVAL errors. It can happen in the X11 code that a descript- or has become invalid before it is removed from the managed set - Rewritten the signal handling functions to restore the old actions and masks when the NX transport is destroyed. - Added a NXTransAgent() function to let agents tell the proxy which descriptor must be used for the controlling connection. Setting a controlling connection has the effect of disabling further X client connections and makes the proxy terminate when the channel is shut down. - Solved a problem with setting the initial timeout in the select(). - Modified the Makefile.in to not include -Wno-deprecated when compi- ling C programs. nxcomp-1.5.0-9 - Fixed a problem that prevented the 1.5.0-8 to work on the NX server side. - This version has NX_FORCE_NULL_LISTEN_OPTION and NX_FORCE_NEW_SES- SION_OPTION undefined, so it should work in a way that is compati- ble with the old nxcomp. nxcomp-1.5.0-8 - The new code comes with a preliminary integration of nxcomp with SSH. It is now possible to create the NX transport by just calling the "switch" command as in the following example: NX> 299 Switching connection to: NX options: ... - Other possible forms for the NX switch command are: NX> 299 Switching connection to: NX mode: ... NX> 299 Switching connection to: NX mode: ... options: ... Or just: NX> 299 Switching connection to: NX The "mode" parameter is there to provide a way to run both enc- rypted and unencrypted connections. Possible values are "encrypt- ed", "unencrypted" or "default", the latter being an alias for "encrypted". Unfortunately I was not able to test unencrypted connections, so this may or may not work. - The top-level process can create the NX transport layer by calling NXTransCreate(). The user has to set up a socket pair and pass the higher descriptor to nxcomp. nxcomp will later monitor its end, by reading and writing NX-encoded traffic. The user has to call the NXTransExecute() function as often as it is possible, by letting first NXTransPrepare() combine the sets of NX descriptors with the descriptors that are used inside its process. A custom NXTransSel- ect() is provided to optionally replace the original select(). This function saves the original error code and the number of selected descriptors upon exit, so the user can call it, restore the original values as they were returned by the select() and run the rest of the loop unmodified. - Future versions of the library should provide appropriate methods for passing data to and from the proxy by means of a memcpy(), so that it will be possible to remove the even minimal TCP overhead. - Note that integration is far from complete. More work is required especially to manage the shutdown cleanly, in a way that gives to SSH a chance to free its resources, and on adding facilities for handling SSH and NX signals in a single function. - Rewritten the initialization procedure to make possible to run the proxy in-process in an arbitrary connection manager, like SSH or a HTTP utility. The same functionality can be used to embed nxcomp in the NX agents, so that nxcomp has not to run in a separate process. - A new state-machine handles the advances through the connection stages until the remote proxy (or the forwarder process ) is auth- enticated, options have been negotiated and the session is started. - The option "session" is now used to pass the name of the session file to the proxy. The parameter was previously used to pass the literal name of the session, as set by the user, and was ignored by the proxy. By default the session log is the standard error of the process. It is anyway required to set the option when running inside SSH, otherwise output will go to the same file as the SSH output. In the NX client this would be the 'sshlog' file. - This version can be easily crafted to test the new integration by setting the following define: NX_FORCE_NULL_LISTEN_OPTION This makes possible to test the nxcomp/nxssh integration by using any production 1.4.0 client. To run this version you are required to use nxproxy 1.5.0-4 and nxssh-1.5.0-6. - New functions handling enabling and disabling signals, based on sigprocmask(). - Improved error reporting when failures are encountered while ne- gotiating the session. nxcomp-1.5.0-7 - Caches are saved with a version identifier 1.4.0 so that they are not discarded after upgrading the software to the 1.5.0. - Made values of T_* enumerations to be all lower case. - Updated copyright to year 2005. - Started working on an interface for running nxcomp in-process, as a additional transport layer of nxssh or nxagent. nxcomp-1.5.0-6 - Modified the configure script and the makefiles to not include the -Wstrict-prototypes and -Wmissing-prototypes compilation flags. The -Wnested-externs and -Wmissing-declarations flags are not included when using GCC 3. - Removed the initial newline from string "NXPROXY - Version" printed at program startup. - Made X authentication compatible with 1.4.0 clients. This is a tem- porary solution while code is updated to handle the new X authori- zation scheme. nxcomp-1.5.0-5 - Added an Auth class to handle the X authentication. The NX server should now use the same proxie cookie that is passed by the client at session startup. The X server side proxy will forward the autho- rization credentials by replacing the fake cookie with the real co- okie, as it is read from the auth file using the xauth utility. The implementation is based on the corresponding code found in the SSH client and comes with the same limitations: only MIT-MAGIC-COOKIE-1 cookies are checked and the authorization file is read only once, at the time the instance is initialized. If the auth file changes along the life of the session, the old cookie will still be used. This works with X servers because of an undocumented "feature". See also nx-X11. nxcomp-1.5.0-4 - Adjusted for alarm(0) returning an inconsistent value in ConnectTo- Remote(). - Small changes to Types.h, Jpeg.cpp and Png.cpp to compile with gcc 3.4.2. - Cosmetic changes to the ChangeLog file. nxcomp-1.5.0-3 - Removed test code from ServerChannel.cpp. - Small cosmetic change in Loop.cpp. - Tested for compatibility against 1.4.1-8. nxcomp-1.5.0-2 - Changed VERSION file according to TRCL052336. nxcomp-1.5.0-1 - Opened the 1.5.0 branch based on 1.4.1-9. nxcomp-1.4.1-9 - Implemented methods PACK_RDP_PLAIN_64K_COLORS and PACK_RDP_PLAIN_- 16M_COLORS. It seems that 16 bpp plain bitmaps can be seldom recei- ved. This doesn't seem to be the case of 24 bpp bitmaps. nxcomp-1.4.1-8 - The new code enables use of 16 bpp and 32 bpp RDP bitmaps. This re- quired modifications to the following files: Misc.h Misc.cpp Loop.cpp Control.cpp ServerChannel.cpp Unpack.h Unpack.cpp - Lots of cosmetic changes compared to the original code in 1.4.1-7. - Merged the 1.4.0 and the 1.4.1 branches by importing changes up to the 1.4.1-7. nxcomp-1.4.0-30 - Modified the function checking the Unix socket where X connections will be forwarded. The function will not fail if the socket itself doesn't exist yet. This solves the TRCL042203. - Moved the code checking for the CTRL+ALT+SHIFT+ESC sequence to a separate function. The implementation will now look for a different sequence on the MacOS/X platform. This should solve the TRCL042182. nxcomp-1.4.0-29 - Solved a bug that could cause proxy to stop reading data from the X channels due to an incorrect calculation of the bytes queued on the proxy link. The bug only affected Linux kernels of the 2.0/2.2 series. - Fixed a problem in the proxy class that could let the select time- out to become zero. nxcomp-1.4.0-28 - Prevented the main proxy process from quitting when the fork() of any of the children fails. This can actually happen on Windows due to conflicts in reallocating any of the Cygwin DLLs. - Reworked handling of the priority flag in channels when dealing with the X_InternAtoms and X_AllocColor requests to reduce the time of session startup. Priority is never set in case of X_InternAtom requests and replies as we assume that most clients use the appro- priate Xlib function to pipeline multiple requests in a single net- work operation. - The timeout after which proxy will abort the peer connection is still 120 seconds. An alert dialog will be shown earlier, after 30 seconds instead of 60. nxcomp-1.4.0-27 - Removed the code setting priority on channels on ButtonPress and Button release events. It seems preferrable to delay the flush and pack more events in a single frame. This makes possible to get the ButtonRelease together with the ButtonPress. - Fixed error detection in SetNoDelay() where a positive result could produce a 'not supported' message in debug mode. nxcomp-1.4.0-26 - Reworked the check aimed at detecting the clock drifts. The previ- ous code, introduced in 1.3.2-2, had the undesired side-effect of resetting the proxy timeout. This could cause the proxy to never detect that the other end had been killed. - The default behaviour of proxy is now to terminate the session at the time an error is encountered. This includes network failures. - Added a new dialog to be shown to the user whenever the session is terminated abnormally. nxcomp-1.4.0-25 - Fixed a bug in handling of suppression of errors generated by committing the image splits. Other errors, unrelated to the commit of split, could be suppressed. This might cause the hangup of the session when the suppressed error was matching a reply. nxcomp-1.4.0-24 - When killing the proxy process -9 the watchdog could remain alive. This caused the SSH link to keep the stderr open, with the effect that former proxy message were not flushed to the session log. Now the watchdog checks every second if the parent is dead, so that file descriptors can be closed as soon as possible. - SetupDisplaySocket() tried to force the connections to the X server on the UNIX port whenever the display was set to localhost. This patch was intended to fix a bug in nxclient, using the TCP port even when the display was set to a UNIX socket. This beha- viour caused problems when running nxclient on a remote host by means of a ssh -X. Proxy will now adhere to the display setting. nxcomp-1.4.0-23 - Added the possibility to respawn nxclient at the end of session. This is an useful feature when powering thin-clients where NX is the only application made available. - This configuration applies system-wide to the local client ins- tallation. By default it is disabled. It can be enabled by the by creating a 'noexit' file in the directory '/usr/NX/share', or at compile time, by setting ENABLE_RESTART_ON_SHUTDOWN to 1. - Note that the solution is not perfect yet, as there are cases where session could die without going through HandleShutdown(), for example if a decoding error is raised in the communication with the remote peer and the subsequent restore of the proxy link fails to succeed. nxcomp-1.4.0-22 - Corrected typos in Timestamp.h and Loop.cpp. nxcomp-1.4.0-21 - Tuned the handling of RenderCompositeGlyphs. Now compression of RENDER shows an average ratio of 8:1. This is a steady increase compared to the 5:1 of the 1.3.2 version. The overall advantage when running clients displaying a large amount of text is 30%. nxcomp-1.4.0-20 - Added a new message store for the CreatePixmap request. - Fixed handleCopy() to only send the data part past the offset. This fix can save a significant amount of traffic, especially when sending many small images whose size doesn't reach the threshold set for compressing them. nxcomp-1.4.0-19 - Added tuning of all the RENDER requests. RenderCompositeGlyphs will require further work. - Completed porting of the RENDER requests to the new templates. nxcomp-1.4.0-18 - Tuned the handling of RenderCreatePicture and RenderFreePicture. - Created a new template system for writing new message encoders. - Renamed getBits() in EncodeBuffer with diffBits(). The getBits() method now returns the bits actually allocated in the buffer and can be called multiple times. nxcomp-1.4.0-17 - Provided specific encoding of the remaining RENDER requests and added compression of RenderCreateGlyphSet. nxcomp-1.4.0-16 - Code underwent through 7 different patch versions but seems to be stable now. It still needs to provide specific encoding for RenderCreatePicture RenderChangePicture and RenderFreePicture. Code will likely include incompatible changes at any new version until the new encoding will stabilize, so be sure that you use the same nxcomp version at both sides. - Created the infrastructure for compressing extension messages based on the minor opcode. A new class, MinorMessageStore, has to be inherited by stores requiring specific compression, so that all the encoding methods of the parent can be redirected to it. The RENDER extension is now compressed using this new class. - Managed to maintain the compatibility with caches created by the 1.3.X version. Caches will be saved using the old format if the remote version is not a 1.4.x. When restoring a cache created by the 1.3.x with both proxies being the newest version, RENDER mesages will be discarded without having to discard the whole cache. - Added a member to the message class to store the identity size. This field is now used instead of the default data offset to manage the message data, that is the part of message after the identity. - Removed the warnings printed in the session log when passing the 'kbtype' and the 'geometry' options to the proxy. These options are actually used by agents. nxcomp-1.4.0-15 - Started implementation of the new framework for handling enco- ding of X extensions. - Renamed the overloaded methods handleEncode() and handleDecode() to handleEncodeCached(), handleEncodeIdentity() and handleDecode- Cached(), handleDecodeIdentity(). - Updated the copyright notice to year 2004. nxcomp-1.4.0-14 - Added the new channel for HTTP connections. This channel can be used to let applications running on the NX server get access to data and applications made available by a HTTP daemon running at the client side. This channel is not used at the moment by nxclient. It can be activated by passing http=1 to the NX server side proxy and the value http=80 to the NX client side. nxcomp-1.4.0-13 - Quick patch to run on MacOS/X where inet_addr("127.0.0.1") alone seems to fail to return a valid interface. nxcomp-1.4.0-12 - Few cosmetic changes to logging. - Removed the debug output. nxcomp-1.4.0-11 - Removed code used for simulating the new forwarding function- ality without client and server support. nxcomp-1.4.0-10 - Implemented authentication of the forwarder to the listening proxy. If a session cookie is required, the forwarder must provide the cookie upon connection. An authentication phase at the time the forwarder connects to the NX client side is strongly suggested because it is usu- ally this side that sends the authorization cookie. Without such a forwarder authentication, the local peer would reveal the cookie to the first process connecting to the port. - If no cookie is specified in the switch command, the forward- er is required to skip the authentication phase. This can be useful when running the programs on the command line. - The implementation required appropriate changes to session negotiation in nxssh. This version requires nxssh-1.4.0-8. nxcomp-1.4.0-9 - Fixed the startup procedure to correctly negotiate the cookie when the X server side proxy is listening for a forwarder. - When listening for a local forwarder (that is when the listen option is enabled at X server side), proxy will listen for the forwarder on the localhost interface. - This version has ports and and other parameters hardcoded for testing purposes and is not intended for normal use. nxcomp-1.4.0-8 - Slightly modified the text of FAILED_PROXY_CONNECTION alert. nxcomp-1.4.0-7 - Added provision for leaving a running dialog showing an OK box if proxy is exiting abnormally. This seems to fail to yield the expected results as, at the present moment, client checks if parent has exited. - Added a Binder class invoked when calling proxy with -B option. It would serve as a replacement of the modifications I'm doing in nxssh. The class is just a framework and the implementation is unfinished. nxcomp-1.4.0-6 - Added a line in the session log if the connection procedure is aborted due to a signal. - Fixed ParseHostOption() to let it take in account the proxy port offset when passing 'host:port' as the last parameter at X server side. nxcomp-1.4.0-5 - Lowered the default port offsets used for CUPS and SMB services to 2000 and 3000. Arbitrary ports can be used by passing the ser- vice's port at proxy startup. By default, anyway, the port is at the same offset of the proxied display. Considering that the NX server uses to start the first session at display 1000, we must lower some of the defaults to avoid interference with the normal X sessions run on the server. Session at display ":1000" will have: . Forwarding of CUPS connections at 3000. . Forwarding of SMB connections at 4000. . The listening proxy (at NX server side) at 5000. This port is not used when enabling SSH tunneling . The proxied X display (NX agent or proxy) at 7000. . Forwarding of multimedia channels at 8000. . Forwarding of embedded keyboard connections at 9000. - Turned off the log output. nxcomp-1.4.0-4 - Managed to get the X client side proxy connect to the remote peer. This means that some parameters that were implicitly assumed based on the proxied port simulating the X display must be now specified in the NX display string. - The 'port' parameter now specifies the remote TCP port where the local proxy will connect to the remote peer. In previous versions this parameter also affected the proxied port. This was mainly a side effect, as the remote peer was always con- tacted at port 4000 plus the proxied display offset. - Added the 'listen' parameter to tell to the proxy that is go- ing to accept the peer connection on which port it will be contacted. By default, similarly to the previous version, the proxy will listen at the proxied display offset. - A check has been added in order to disallow passing both the 'accept' and the 'connect' parameter at the same time. A simi- lar check affects the 'listen' parameter. - Renamed the previously unused 'sync' channel as 'cups'. nxcomp-1.4.0-3 - Preserved the ability of version 1.3.2 to load caches generated by this version. nxcomp-1.4.0-2 - Small fixes to compile under Solaris 8. nxcomp-1.4.0-1 - Opened the 1.4.0 branch. nxcomp-1.3.2-4 - Fixed a problem with shmget(). Code in ServerChannel checked the return value for being greater then 0, while 0 can actual- ly be a valid segment. - When memory cache is disabled, nxcomp will explicitly set the appropriate control variables dealing with loading and saving of the persistent cache. This can be considered a cosmetic change as nxcomp will disable NX delta compression if memory cache is not available and this has an implicit effect on the ability to load and save such a cache. nxcomp-1.3.2-3 - Removed inclusion of zlib.h in Png.cpp. Conflicting symbols with zlib.h from nx-X11 could cause compilation to fail. nxcomp-1.3.2-2 - Added a function to take into account the clock drifts at the time we check the ping from the remote proxy. This can be caused by the user changing the system time or by small adjust- ments introduced by the operating system making the clock go backward. Such events could cause the proxy link to be shut down and reconnected. - Reduced the length of lines printed in statistics when showing the details of X protocol's opcodes. This is intended to help nxclient to keep the whole statistics in the 'details' window, so that users don't have to use the scrollbars. nxcomp-1.3.2-1 - Opened the 1.3.2 branch. nxcomp-1.3.1-5 - It seems that Solaris can return an EINVAL error selecting a shutdown descriptor even before we actually close the socket. We now ignore the condition on Solaris. This is definitely a Solaris bug. nxcomp-1.3.1-4 - Increased the timeout after which proxy will abort the peer connection to 120 seconds. An alert dialog will now be shown after 60 seconds, instead of the 30 seconds being the default in the previous version. Some users reported the timeout to be too short in the case of temporary network failures. nxcomp-1.3.1-3 - Some optimizations in the cache house-keeping process. Now it runs at lower system priority in respect to the parent. Any 2 iterations through directories and images, it also sleeps for a tiny amount of time. This further decreases the system load. - Removed the underline characters and added a colon in the title of this ChangeLog to fully comply with format used in the release notices. nxcomp-1.3.1-2 - Fixed a crash when running both client and server on the SPARC Solaris. An optimization used to avoid byte-swapping when both hosts have the same endianess doesn't work on SPARC if buffer is not aligned to word boundary. A better version of the code should check the CPU, not the OS, as this probably applies to other processors. nxcomp-1.3.1-1 - Opened the 1.3.1 branch. nxcomp-1.3.0-50 - Disabled the processor limit in X client side proxy. In previous versions the processor load limit was set to an idle time ratio of 2. This was likely to cause an unwanted slowdown on very old hardware or when running the server as guest OS inside a VMWare virtual machine. nxcomp-1.3.0-49 - Last minute update on proxy shutdown bug on Cygwin. A stack trace reveals that faillure happens in the static destructor of the BlockCacheSet class. It seems that problem appeared just after having upgraded to the latest version of Cygwin DLL. Now the destructor is skipped at shutdown. nxcomp-1.3.0-48 - Further fix to overcome the shutdown problem on Windows. nxcomp-1.3.0-47 - Used T_files::value_type() in Keeper.cpp. The form without the explicit constructor fails to compile with GCC 2.91 on RH 6.2. - Fixed '==' -> '=' in configure.in to build under RH 6.2 and probably other platforms. nxcomp-1.3.0-46 - The cleanup procedure now skips deletion of the IO streams under Windows. This is intended to overcome a strange segfault occurring at random time, at the time proxy is being shutdown. nxcomp-1.3.0-45 - Newer versions of the stdlibc++ do not seem to be able to deal with NULL strings or non printable characters. This caused the standard error stream to get sometimes corrupted in the case TEST and DEBUG logs were enabled in Loop.cpp. nxcomp-1.3.0-44 - Disabled TEST and DEBUG logs in ServerChannel. nxcomp-1.3.0-43 - Fixed a crash when unpacking an image in server proxy in the case the unpack state for the given channel had not been previously created. nxcomp-1.3.0-42 - Small modification to setSchedule() to not account previous data accumulated in the encode buffer. The new code seems to allow better use of the available bandwidth. nxcomp-1.3.0-41 - Further fix in Tight decompression. Content of the main write buffer was not removed before flushing the unpacked data to the X server link. nxcomp-1.3.0-40 - Removed the code marked as FIXME in Loop and ServerChannel. Code was used in previous version to override any pack method other than NO_PACK and to disable initialization of the shared memory. nxcomp-1.3.0-39 - Solved the problem with unpacking of RDP text on big-endian architectures. The width field in PutPackedImage was put as 16 bits and extracted as 32 bits at decoding side. - Moved the code checking if any of the children has exited in a specific function. This function is now called any time signals are newly enabled. This works even on Solaris. - Enabled use of shared memory with Tight image decompression. - Added event NXCollectPropertyNotify to NXproto.h. nxcomp-1.3.0-38 - Message locks are now checked before splitting a message. nxcomp-1.3.0-37 - Added a further counter to yield encoding data if the amount of output bytes to be written to channels exceeds a threshold. - Modified proxy to write data immediately if the encoding loop was interrupted. nxcomp-1.3.0-36 - Further fix required by Tight decompression. By handling mul- tiple writes in the Tight class we may flush the main write buffer in the wrong order. If Tight decompression is enabled, the buffer is now flushed before decoding the packed image. - A SIGCHLD is raised any time signals are newly enabled. This allows the main loop to wait() the pid of children that had exited while signals were disabled. nxcomp-1.3.0-35 - Fixed Tight decompression by handling multiple writes to the channel's transport inside the decompression function. - Made Tight decompressor in ServerChannel a pointer instead of an instance of the class. Class is allocated the first time it is referenced. - Rewritten handleUnpack() in ServerChannel to use a switch() on the pack method instead of multiple if(). nxcomp-1.3.0-34 - Disabled RENDER extension when running X agent sessions on the Solaris client. Problems seem to be caused by incompati- bilities in the implementation of RENDER on the Sun X server shipped by default. We did not test NX with the XFree86 X server, but it seems that, when using the Sun X server, even plain X clients don't make full use of the extension. nxcomp-1.3.0-33 - Added 4 new fields to the X_NXGetControlParameters reply. A dialog should be shown by agent if proxy was not able to negotiate a persistent cache or if a cache was selected but not loaded because incompatible or corrupted. - Fixed a bug on Solaris where socket() must be recreated if the first connect() fails. Not a problem. The strange thing is that if you reuse the socket(), the subsequent connect() is successful and the program fails as soon as you try to write to it. nxcomp-1.3.0-32 - Added request X_NXFreeUnpack to free the resources allocated by the remote proxy to unpack images for the given agent's client - Added an alert at X server side if proxies were not able to negotiate a persistent cache or if a cache was selected but not loaded at X server side (that means that probably cache was not compatible or corrupted). The alert is not enabled at the moment. Before enabling it, we need to find a way to deal with full-screen mode. - Tuning of MIT-SHM parameters. nxcomp-1.3.0-31 - Modified the following requests to carry the id of the agent's client: - X_NXSetUnpackGeometry - X_NXSetUnpackColormap - X_NXSetUnpackAlpha - X_NXPutPackedImage Now each agent's client has its own record pointing to the geometry, colormap and alpha channel that will be used to unpack the image. Code is not finished yet so it is advisable that agents' writers keep using client id 0. Note also that the final solution will require some changes to the way split notifications are sent to agent that I plan to implement in the next versions. - The X_NXSetUnpackGeometry request has now a message store. This should reduce the overhead to the minimum even in the case of dumb agents not checking if the current geometry matches the image to be unpacked. nxcomp-1.3.0-30 - Improved handling of short-circuited replies at X client side. Request opcodes are now pushed in the sequence queue to determine if a reply is expected. In this case tainting of reply is skipped to preserve the sequence ordering of any event or error that could have generated by the reply. This seems to solve all the problems reported by people running a NX session in virtual desktop mode nested in an existing session being run in single application mode. - Modified the cleanup procedure to print the 'Waiting for' message in the session log only at the time all X channels have been actually shut down. This message can be used by the NX server to find out the appropriate time to close the session. - Added the selected session type to the 'Using pack method' message printed at startup. - Added the option to close down the proxy link and perform a clean shutdown of the session, re-read the whole session configuration or restart the proxy link when a SIGHUP is delivered to the proxy process. The default behaviour is to close down the session. The new default (the old one was to restart the link) is a required feature to let users run full sessions using single application mode f.e. in a LTSP environment. I noted that when the controlling terminal of the X session is closed, a SIGHUP is delivered to the X server side proxy (probably it is delivered to all the con- nected clients, and, thus for NX, only to the proxy). This signal can be used to terminate the whole session. nxcomp-1.3.0-29 - Changed defaults to disable image masks when running proxy in single application mode. The new configuration requires changes in NX server and in NX X11 library. Users should experience much better image quality when using NX on slow links. This comes at the cost of slightly worse compression ratios. nxcomp-1.3.0-28 - Opcode of request was not rewritten by server channel when using link LAN. This caused problems with taint of replies. nxcomp-1.3.0-27 - Modified the split store and the split procedures in client channel to always return the client id in the notification events. The new field is added to event at byte offset 28 to preserve compatibility with previous agent releases. The modification permits to agent to match the commit of alpha channel with the original image, if requests are split by proxy. - Temporarily set the timeout used to poll MIT-SHM completion events coming from X server to 0. More testing is required. - Fixed an inconsistent message generated in statistics due to a division by 0. nxcomp-1.3.0-26 - Modified pending timeout from 1 to 0 milliseconds. This means that both channels and proxy are now immediately restarted to let them consume all data left in their read buffer. - When querying the X server for MIT-SHM support, size of name in X_QueryExtension request was sent as 32 bits instead of 16. This caused request to fail on big endian architectures. - Modified the MIT-SHM initialization procedure to always send all the 3 protocol requests also in the case of early failures. nxcomp-1.3.0-25 - Implemented handling of the new X_NXSetUnpackAlpha message. Performances are very satisfactory. Using most of the current GNOME and KDE applications, caching reaches 90% of the total messages. - Modified the persistent cache management routines to handle backward compatibility with proxy versions prior of 1.3.0. - It has been made possible to send both X_NXSetUnpackColormap and X_NXSetUnpackAlpha messages with 0 entries to temporarily disable use of the colormap or the alpha channel and free the resources allocated by the server channel class. - Added function UnpackAlpha() to Unpack.cpp. nxcomp-1.3.0-24 - Using WriteBuffer::registerPointer() to track growing of the write buffer in handleFastWrite() functions. This problem existed even in 1.2.2 but never shown up because we didn't have to use the pointer after data had been written to the write buffer. Now, instead, we have to post-process the write buffer to copy data to the shared segment. - Optimized memory allocations running with link LAN to save a memcpy() any time new data is allocated in the scratch buffer. - When running with link LAN the scratch buffer is now used only when: - A further allocation would case growing of the write buffer (and, thus, a memcpy() of the previous content). - When data to added is bigger than the write threshold. In previous versions the scratch buffer was used any time the total amount of data to be written (write buffer + scratch buffer) exceeded the scheduled write threshold. This caused small writes to be appended even when a single write could be obtained without reallocating the buffer. - Preliminary support for transporting the alpha channel in a separate message in case of 32 bits displays using the RENDER extension. nxcomp-1.3.0-23 - Modified the mask used to open the shared memory segment on OS/X to 0777. We have to better investigate why the previous 0600 mask doesn't work even if the user running the proxy is the same user running the X server. nxcomp-1.3.0-22 - Implemented MIT-SHM support on LAN connections. - More MIT-SHM bug fixes. nxcomp-1.3.0-21 - Better use of the shared segment through an improved algorithm leveraging the offset field of the X_ShmPutImage request. The new algorithm greatly reduces the amount of polls the proxy needs to perform to find if the completion event has arrived. - Implemented MIT-SHM support for X_PutImage requests. - Implemented option shmem=value. Use of this option is anyway discouraged. Proxy will allocate the shared memory segment based on the size of the in-memory cache set by the user. Use of MIT-SHM is disabled when user did set a memory cache smaller than 2MB (for example on the embedded client). - Rewritten post-processing of images in server channel loop. - Improved error handling to ensure we intercept all MIT-SHM X errors before they reach the NX agent. - Solved a problem that was causing channels to not reflect shared memory support flags set in control. nxcomp-1.3.0-20 - Solved a compatibility problem when mixing proxy versions 1.2.2 and 1.3.0. nxcomp-1.3.0-18 - Rewritten interfaces to shared memory initialization in client and server channel. - Server channel checks for the completion event until a timeout before reusing the shared memory segment. - Flush flag was not cleared after the write buffer had been flushed in handleWrite() of both client and server channels. This could lead to multiple fragmented writes, affecting the performances. - Added -lcygipc to linking on Windows platform. - Added a check on GCC version to see if -Wnested-externs -Wmissing-declarations are valid options. nxcomp-1.3.0-17 - Implemented initial support for MIT-SHM extension in the network path between the X server proxy and the real X server. Presently it works only for X_NXPutPackedImages. - Modified configure.in to compile under FreeBSD. - Small changes to sources due to FreeBSD support. nxcomp-1.3.0-16 - Fixed caching of RENDER extension on MacOS/X and Solaris. - Under Solaris an explicit call to EnableSignal() is needed at the end of the signal handler as raising a signal seems to reset the previous settings. - Can't find a way to get bytes queued for write on Solaris as both FIONWRITE and TIOCOUTQ don't seem to be available. This means that NX server on Solaris is only able to detect con- gestions on proxy link at the time a write fails with error EAGAIN. - Starting from this version, render extension messages are not automatically discarded from cache when running agent based X sessions. This is in preparation of render support introduced in this release. nxcomp-1.3.0-15 - Changed default to force writes if X channels exceed buffer limits. This change was suggested by benchmarks performed on Win32. - Wrapped IO on cache files in functions performing better error checking. - General cleanup in handling of socket options for MacOS/X and Solaris. nxcomp-1.3.0-14 - Corrupted persistent caches were not deleted in case loading of any of the message stores failed. To run further sessions on the same host, user had to delete the cache file manually. - Improved error handling in JPEG decompression. Now connection is reset in case of failure. - Before performing JPEG or PNG decompression, image is better checked to verify if loading from disk failed. - Improved error handling in case of failure loading persistent cache from disk. On MacOS/X istream -> fail() doesn't seem to work properly. This needs further investigation. - The default installation path of nxclient is searched under MacOS/X at the time nxclient is invoked in dialog mode. nxcomp-1.3.0-13 - Fixed a (further) compilation problem under Solaris. Now static libraries are first searched under /usr/sfw/lib (in case Sun would decide to include them in future releases). nxcomp-1.3.0-12 - Fixed parsing of command line when passing option -V. - Correctly detected ENOPROTOOPT when setting TCP_NODELAY socket option on MacOS/X and Solaris. nxcomp-1.3.0-11 - Given option in configure to specify what needs to be built statically: --with-static-png enable static linking of PNG library --with-static-jpeg enable static linking of JPEG library --with-static-z enable static linking of Z library nxcomp-1.3.0-10 - Fixed a problem in saving of persistent cache on big-endian machines. nxcomp-1.3.0-9 - Testing with different settings to check if it's possible to increase the performances under Windows. - Solved a problem in parsing of options that prevented proxy to connect to a remote session running at port offset 0. - Fixed two warnings compiling on Solaris. - Changed configure.in to first check for nx-X11 includes and libraries. Added "/usr/openwin/bin/makedepend" to path searched for the executable. nxcomp-1.3.0-8 - Small cleanup in configure.in and files modified by Gregorz Kryza to add support for Solaris. - A new configure script has been generated using autoconf-2.57-3. nxcomp-1.3.0-7 - Added support for detection of Solaris in configure script. Now Makefile.in uses ranlib instead of ar. - Small changes in source and header files to support Solaris. nxcomp-1.3.0-4 - Corrected a bug that could cause priority on proxy and channels to be not taken in account at the time proxy tries to determine if it's time to flush the proxy link. - Better implementation of abort split notification by X server proxy to its remote peer. The new implementation doesn't need to set a timeout and permits notifications to be received earlier. - Improved support for 'tainting' XSync() messages coming from X clients in single application mode. Now a X_GetInputFocus is sent to the real X server any n such messages received by proxy. - Included support for 15 bpp displays. It seems that handling them as 16 bpp it's OK.