path: root/nx-X11/config/cf/host.def.NX.original

XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
/******************************************************************************/
/*
 * This file is to provide a quick method for most people to change the
 * behaviour of their Xorg installation without having to fully
 * understand the workings of site.def and all the various '.cf' files.
 *
 * In the vast majority of cases, it should not be necessary to use this
 * file at all or change it in any way.
 *
 * This file is divided into two sections.  The first contains settings
 * that end-users might reasonably change.  The second contains settings
 * that developers might want to change.
 *
 * IMPORTANT NOTE:  In all cases changing the defaults may cause problems
 * and/or unexpected side-effects.  If you don't understand what a setting
 * does, then it's best to not change it.  If you make changes and have
 * problems, verify that those problems are also present when using an
 * empty host.def file and unchanged version of this file before reporting
 * them.
 *
 * A good way to use this file is to copy it to host.def, and make the
 * changes there.  That way, future patches to this file won't fail.
 * The host.def file will never be patched.
 *
 * The distributed version of this file MUST contain no uncommented
 * definitions.  Default definitions belong in xorg.cf, or <vendor>.cf
 * files.
 */
/******************************************************************************/

/**************************************************************************/
/*                                                                        */
/* Copyright (c) 2001, 2007 NoMachine, http://www.nomachine.com/.         */
/*                                                                        */
/* NX-X11, NX protocol compression and NX extensions to this software     */
/* are copyright of NoMachine. Redistribution and use of the present      */
/* software is allowed according to terms specified in the file LICENSE   */
/* which comes in the source distribution.                                */
/*                                                                        */
/* Check http://www.nomachine.com/licensing.html for applicability.       */
/*                                                                        */
/* NX and NoMachine are trademarks of NoMachine S.r.l.                    */
/*                                                                        */
/* All rights reserved.                                                   */
/*                                                                        */
/**************************************************************************/

#if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture)

#if defined(SunArchitecture)
#define ProjectRoot /usr/openwin
#endif

/*
 * Enable use the Cygwin IPC libraries to get MIT-SHM support.
 */
#if defined(cygwinArchitecture)
#define UseCygIPC	YES
#endif

/*
 * If you have build-specific modifications in your host.def file, but
 * want an empty host.def file installed when doing 'make install',
 * uncomment the following
 *
#define InstallEmptyHostDef
 */

/*
 * Which servers to build.  There is only Xorg server.
 * It can be disabled by the following.
 *
#define XorgServer		NO
 */
#define XorgServer		NO

/*
 * To disable building the Xnest server, uncomment this.
 *
#define XnestServer		NO
 */
#define XnestServer		NO

/*
 * To disable building Xvfb, uncomment this.
 *
#define XVirtualFramebufferServer	NO
 */
#define XVirtualFramebufferServer	NO

/*
 * To enable building Xdmx, uncomment this.
 *
#define XdmxServer YES
 */
#define XdmxServer NO

/*
 * To disable building Xprt, uncomment this.
 *
#define XprtServer NO
 */
#define XprtServer NO

/*
 * Xprint is needed by Xprt. You can disable it if
 * you are not going to build Xprt.
 *
#define BuildXprint		NO
 */
#define BuildXprint		NO

/*
 * Building libraries with NX enhancements is disabled
 * by default. You should enable this in your host.def.
 *
#define NXLibraries		YES
 */
#define NXLibraries		YES

/*
 * Building the NX agent nested server is disabled
 * by default. Enable this in your host.def.
 *
#define NXAgentServer		YES
 */
#define NXAgentServer		YES

/*
 * Assume the new build tree.
 *
#define NXUpgradeAgentServer	NO
 */
#define NXUpgradeAgentServer	YES

#ifdef NXAgentServer
#define BuildRenderLibrary	YES
#define SharedLibFreetype2	YES
#define NormalLibFreetype2	YES
#define FontLibSharedFreeType 	NO
#endif

/*
 * Define this symbol to build the NX enhanced MS Windows
 * X server for Cygnus environment.
 *
#define NXWinServer		YES
 */
#if defined(cygwinArchitecture)
#define NXWinServer             NO
#define XWinServer              NO
#endif

/*
 * Set the default server (ie the one that gets the sym-link to "X")
 *
#define ServerToInstall		Xorg
 */

/*
 * Force build of X libraries if any nested server is to be built.
 *
#define BuildLibraries			YES
 *
 * If you just want libraries for NXAgentServer, this should be
 * enough (never tested, although).
 *
#define BuildLibrariesForXServers	YES
 */
#if XnestServer || NXAgentServer
#define BuildLibraries			YES
#endif

#define BuildDamageLibrary              YES

#define BuildXfixesLibrary              YES

#define BuildCompositeLibrary           YES

#define BuildRandRLibrary               YES

#define BuildDocs                       NO

#define BuildComposite			YES

/*
 * If you only run the X server under xdm the X servers don't need to be
 * installed SetUID, and you may comment out the lines below.  If you run
 * the servers by hand (with xinit or startx), then they do need to be
 * installed SetUID on most platforms.
 *
 * Consult your system administrator before making the X server setuid.
 *
#define InstallXserverSetUID	NO
 */


/*
 * Server configuration parameters.  The defaults are shown here:
 */

/*
 * Which drivers to build.  When building a static server, each of these
 * will be included in it.  When building the loadable server each of these
 * modules will be built.
 *
#define XF86CardDrivers		mga glint nv tga s3virge sis rendition \
				neomagic i740 tdfx savage \
				cirrus vmware tseng trident chips apm \
				GlideDriver fbdev i128 \
				ati DevelDrivers ark cyrix \
				siliconmotion \
				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
 */

/*
 * To add third party drivers to the standard driver list, set the
 * following.
 *
#define XF86ExtraCardDrivers	extradriver1 extradriver2 ...
 */

/*
 * Select the XInput devices you want by uncommenting this.
 *
#define XInputDrivers		mouse keyboard acecad calcomp citron \
				digitaledge dmc dynapro elographics \
				microtouch mutouch penmount spaceorb summa \
				wacom void magictouch aiptek
 */

/* To enable building of development DRI drivers (insecure, or not
 * useful on the chosen architecture, uncomment this define.
#define BuildDevelDRIDrivers YES
 */

/*
 * To use the deprecated, old keyboard driver, uncomment this.  But
 * even better, make the new keyboard driver (hw/xfree86/input/keyboard)
 * work for your architechture.  The old driver will be removed in the
 * next release.
 *
#define UseDeprecatedKeyboardDriver YES
 */

/*
 * There are three parameters that determine where and how the Matrox HAL
 * library is used:
 *
 *   HaveMatroxHal  -- You have the HALlib.a binary library installed
 *                     in xfree86/drivers/mga/HALlib, and you want it to
 *                     be used.
 *                     Default: NO
 *
 *   BuildMatroxHal -- You have the source for the HALlib library (installed
 *                     in xfree86/drivers/mga/hallib), and want to build and
 *                     use it.
 *                     Default: NO
 *
 *   UseMatroxHal   -- You want to build support for loading/using the HAL
 *                     library into the mga driver.  For module server builds
 *                     you don't need to have the HALlib library to do this.
 *                     but you want to build support for loading it and using
 *                     it into the mga driver module.
 *                     Default: YES for loadable server build
 *                              (HaveMatroxHal || BuildMatroxHal) for static
 */

/*
 * To disable use of the Matrox HAL library, uncomment this:
 *
#define UseMatroxHal		NO
 */

/*
 * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
 * uncomment this:
 *
#define HaveMatroxHal		YES
 */

/*
 * If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
 * uncomment this:
#define BuildMatroxHal		YES
 */

/*
 * To disable building the font server, uncomment this.
 *
#define BuildFontServer		NO
 */
#define BuildFontServer		NO

/*
 * Speedo fonts have been disabled by default in this release.
 * To re-enable support for Speedo fonts, uncomment this.
 *
#define BuildSpeedo		YES
 */

/*
 * To disable support for CID fonts, uncomment this.
 *
#define BuildCID		NO
 */

/*
 * To disable support for TrueType fonts, uncomment these.
 *
#define BuildFreeType		NO
 */

/*
 * To set non-default build options for the underlying FreeType libraries,
 * add them here and uncomment.
 *
#define Freetype2BuildDefines	-DFREETYPE_BUILD_DEFINES
 */

/*
 * To build the FreeType libraries with the TrueType byte code interpreter
 * enabled, uncomment this.  Note that there are patent issues related to the
 * TrueType byte code interpreter, and we only recommend you enabling this
 * if you are sure that there are no legal impediments to you doing so.  See
 * <http://www.freetype.org/patents.html> for further information.
 *
#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER
 */

/*
 * Do you want to Build Fonts (Usually you only want to build and install
 * fonts once, if this is a first time install you will want to build the
 * fonts)
 *
#define BuildFonts		NO
 */
#define BuildFonts		NO

/*
 * To not build/install the 75dpi fonts, uncomment the following
 *
#define Build75DpiFonts		NO
 */

/*
 * To not build/install the 100dpi fonts, uncomment the following
 *
#define Build100DpiFonts	NO
 */

/*
 * To build/install the Speedo fonts, uncomment the following
 * (see setting above about Speedo support as well)
 *
#define BuildSpeedoFonts	YES
 */

/*
 * To not build/install the Type1 fonts, uncomment the following
 *
#define BuildType1Fonts		NO
 */

/*
 * To not build/install the CID fonts, uncomment the following
 *
#define BuildCIDFonts		NO
 */

/*
 * To not build/install the True Type fonts, uncomment the following
 *
#define BuildTrueTypeFonts	NO
 */

/*
 * To not build/install the Cyrillic fonts, uncomment the following
 *
#define BuildCyrillicFonts	NO
 */

/*
 * To not install the local font directory, uncomment the following
 *
#define MakeLocalFontDir	NO
 */

/*
 * Include True Type Fonts to default font path. It is safe to do
 * this by default as NX intaller carries only misc and TTF in the
 * basic set of fonts installed under Windows.
 *
#define DefaultFontPath		$(FONTDIR)/misc/,$(FONTDIR)/Speedo/,$(FONTDIR)/Type1/,$(FONTDIR)/75dpi/,$(FONTDIR)/100dpi/
 */

#if defined(LinuxArchitecture) || defined(SunArchitecture) || defined(FreeBSDArchitecture)
#define DefaultFontPath		$(FONTDIR)/misc/,$(FONTDIR)/Speedo/,$(FONTDIR)/Type1/,$(FONTDIR)/75dpi/,$(FONTDIR)/100dpi/,$(FONTDIR)/TTF/
#endif /* #if defined(LinuxArchitecture) || defined(SunArchitecture) */

#if defined(cygwinArchitecture)
#define DefaultFontPath		/mnt/NX/fonts/base/,/mnt/NX/fonts/misc/,/mnt/NX/fonts/Speedo/,/mnt/NX/fonts/Type1/,/mnt/NX/fonts/75dpi/,/mnt/NX/fonts/100dpi/,/mnt/NX/fonts/TTF/
#define DefaultRGBDatabase      /mnt/NX/fonts/rgb
#endif /* #if defined(cygwinArchitecture) */

/*
 * To build only the servers with a cut-down source tree, uncomment
 * this.
 *
#define BuildServersOnly	YES
 */
#define BuildServersOnly	YES

/*
 * By default, the sample config files for xinit, xdm and xfs are installed
 * only when there is no pre-existing version installed.  Uncommenting the
 * following lines will force the sample versions to be installed even if
 * it means over-writing existing versions.
 *
#define InstallXinitConfig	YES
#define InstallXdmConfig	YES
#define InstallFSConfig		YES
 */

/*
 * By default the application defaults files are always installed.
 * Uncommenting the the following will prevent exising application
 * defaults files from being over-written.
 *
#define InstallAppDefFiles	NO
 */

/*
 * Undefine the following if you don't want to have config files and
 * app-defaults installed in a separate directory (i.e. /etc/X11).
 *
#define UseSeparateConfDir NO
 */

/* 
 * To enable building the glide driver, you need to define 
 * HasGlide2 to YES and set the Glide2IncDir variable. 
 * HasGlide2 is per default NO.
 *
#define HasGlide2 YES
 */

/*
 * Set the path to your Glide include files.
 *
#define Glide2IncDir /usr/include/glide
 */

/* 
 * Have glide 3?
 *
#define HasGlide3 YES
 */

/*
 * Set the path to your Glide 3 include files.
 *
#define Glide3IncDir /usr/include/glide3
 */



/*
 * Unless you're a developer you shouldn't need to change anything
 * beyond this point.
 */

/*
 * If you want to enable some developer settings, like more verbose
 * compiler warnings, uncomment this.
 *
#define XFree86Devel	YES
*/

/*
 * If using GCC 2.x on a system where it isn't the default, uncomment
 * the following
 *
 */
#if defined(SunArchitecture)
#define HasGcc2		YES
#define HasGcc		YES
#endif

/*
 * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
 * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
 * If you are using a version that doesn't have this bug, you can
 * uncomment the following line, and remove '-fno-strength-reduce'
 * If you are building binaries for a 486, it may be beneficial to add
 * -m486
 *
#define DefaultGcc2i386Opt	-O2 -fno-strength-reduce
 */

#if defined (LinuxArchitecture)
#define DefaultGcc2i386Opt      -g -O3
#endif

/*
 * Enable all the optimizations on AMD64.
 */

#define DefaultGcc2AMD64Opt	-g -O3 GccAliasingArgs

/*
 * This allows the GCC warning flags to be set.  The default is shown here.
 *
#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
                          -Wmissing-prototypes -Wmissing-declarations \
                          -Wredundant-decls -Wnested-externs
 */

/* 
 * Sun Compiler stuff.. 
 *
#define HasSunC                         YES
#define HasSunCplusplus                 YES
#define CplusplusCompilerMajorVersion   5
#define CplusplusCompilerMinorVersion   0
#define CCompilerMajorVersion           5
#define CCompilerMinorVersion           0
 */

/*
 * Optimized Sun Compiler Build.
 *
#define DefaultCDebugFlags              -xO4 -xtarget=pentium_pro
#define OptimizedCDebugFlags            -xO4 -xtarget=pentium_pro
 */

/* 
 * Debuggable Sun Compiler Build. 
 * Note: This builds _EVERYTHING_ as debuggable
 *
#define DefaultCDebugFlags              -g -xs
#define OptimizedCDebugFlags            -g -xs
 */

/*
 * For Linux, this should match the Binutils version you have.  This example
 * is for 2.6.0.7.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxBinUtilsMajorVersion	26
 */

/*
 * For Linux, these should match the libc version you have.  This example
 * is for libc.5.4.x.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxCLibMajorVersion	5
#define LinuxClibMinorVersion	4
 */

/*
 * If you want to use the GNU malloc library, uncomment this
 *
#define UseGnuMalloc		YES
 */

/*
 * Set this to whatever is required to access the GNU malloc library.
 * The default is '-lgmalloc' unless is specified in the OS's .cf file.
 *
#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
 */

/*
 * To enable the internal Xserver malloc, uncomment this
 *
#define UseInternalMalloc	YES
 */

/*
 * Some Linux releases don't have a libtermcap.  In this case you may need
 * to uncomment the following
 *
#define TermcapLibrary		-lncurses
 */

/*
 * Build a server that dynamically loads the modules by setting
 * this to YES.  This defaults to YES on most platforms.  A static server
 * can be built by setting this to NO.
 *
#define DoLoadableServer	NO
 */

/*
 * This release defaults to building dlopen() style modules instead of the 
 * previously standard loader modules.
 * 
 * Uncomment the following to return to the XFree86 custom loader modules.
 *
#define MakeDllModules		NO
 */

/*
 * Build XAA.  This can be disabled with:
 *
#define XF86XAA			NO
 */

/*
 * Build vgahw.  This can be disabled with:
 *
#define XF86VgaHw		NO
 */

/*
 * Build xf1bpp.  This can be disabled with:
 *
#define XF1Bpp			NO
 */

/*
 * Build xf4bpp.  This can be disabled with:
 *
#define XF4Bpp			NO
 */


/*
 * BSD Console driver support (for FreeBSD and NetBSD).
 *
 * By default, support is included for pccons and pcvt for NetBSD, and
 * pccons, syscons and pcvt for FreeBSD.
 *
 * To change the list of supported drivers, set the following parameter.
 * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
 * The following example includes support for syscons and pcvt only.
 *
#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
 */

/*
 * To link the X server with a dynamic version of the Xfont library,
 * uncomment this.
 *
#define XserverStaticFontLib	NO
 */

/*
 * To enable binary compatibility with previous versions of the font
 * encoding support, uncomment this.
 *
#define FontencCompatibility    YES
 */

/*
 * To disable building XInput support, uncomment this
 *
#define BuildXInputExt		NO
 */
#if defined(SunArchitecture)
#define BuildXInputExt		YES
#endif

/*
 * Uncomment this for joystick support.
 *
 * Note: Joystick support is broken, so don't enable this.
 *
#define JoystickSupport YES
 */

/*
 * To disable the ScreenSaver Extension, uncomment this line.
 *
#define BuildScreenSaverExt	NO
 */
#define BuildScreenSaverExt	NO

/* 
 * If you don't want to build Xinerama support, uncomment this.
 *
#define BuildXinerama		NO
 */
#define BuildXinerama		NO

/*
 * If you don't want to build support for the GLX extension, uncomment this.
 *
#define BuildGlxExt             NO
 */
#define BuildGlxExt             YES

/*
 * Taken from xorg.cf.
 */

#if defined(SparcArchitecture)  \
   || defined (Sparc64Architecture) \
   || defined(ia64Architecture) \
   || defined(s390xArchitecture) \
   || defined(AMD64Architecture)
#define GlxExtraDefines -D__GLX_ALIGN64
#endif

/*
 * If you want to build the xf86rush extension, uncomment this line.
 * This isn't recommended.
 *
#define BuildXF86RushExt	YES
 */
#define BuildXF86RushExt	NO

/*
 * If you want to build the client library for the xf86rush extension,
 * uncomment this line.  This isn't recommended.
 *
#define BuildXF86RushLibrary	NO
 */
#define BuildXF86RushLibrary	NO

/*
 * We should never need LBX in a NX enabled environment...
 *
#define BuildLBX		NO
 */
#define BuildLBX		NO

#define BuildXKB		YES
#define BuildXKBlib		YES

#define SharedLibXau		NO

/*
 * If you are running NetBSD 0.9C or later, and have the aperture driver
 * installed, uncomment this.
 *
#define HasNetBSDApertureDriver	YES
 */

/*
 * If you are running SVR3 and have the mmap driver installed (for linear
 * framebuffer access) uncomment this.
 *
#define HasSVR3mmapDrv	YES
 */

/*
 * If you are using an SVR3 (like ISC 4.x) which supports long file names,
 * you can uncomment this to have manual pages installed under their
 * full names
 *
#define ExpandManNames		YES
 */

/*
 * For a POSIXized build on Interactive uncomment this
 * Could be used with gcc 'till Version 2.6.3
 * Should be used with gcc 2.7.2. 
 *
#define UsePosix		YES
 */

/*
 * If you don't want XDMAUTH support (if you don't have Wraphelp.c), 
 *  comment this out.
 *
 */
#if defined(LinuxArchitecture)
#define HasXdmAuth		YES
#endif /* #if defined(LinuxArchitecture) */

/*
 * If you have Linux DECnet support, and want to build XFree86 with support
 * for connections over DECnet, uncomment this.
 *
#define HasDECnet		YES
 */

/*
 * To build static and shared libraries with debugging information, uncomment
 * this. Assumes you have Gcc2.
 * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
 * to build debugging versions of the libraries separately.)
 *
#define DebuggableLibraries	YES
*/
#if defined(LinuxArchitecture)
#define DebuggableLibraries	YES
#endif /* #if defined(LinuxArchitecture) */
/*
 * To forceably build static libraries in addition to shared libraries,
 * uncomment this.
 *
#define ForceNormalLib		YES
 */

/*
 * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
 * not the Linux ELF versions.
 *
#define LinuxElfDefault		NO
 */

/*
 * To use ELF format shared libraries for supported OSs, uncomment this.
 *
 * For Linux the default setting of this is the same as the setting of
 * LinuxElfDefault.
 *
 * For FreeBSD this should automatically be set correctly by imake.  Only
 * change it here if you need to override the automatic setting.
 *
#define UseElfFormat		YES
 */

/*
 * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
 * a.out compatibility libraries.  To enable that, uncomment this.
 *
#define BuildAoutLibraries	YES
 */

/*
 * If you have trouble with make bombing out in Xlib, try uncommenting this.
 * You will not get dependencies as a result, but better than nothing.
 *
#define MakeHashTableBug        YES
 */

/*
 * If you do not want your man pages compress under SVR3 systems that
 * support it, uncomment this.
 *
#define CompressManPages        NO
 */

/*
 * If you have sgmlfmt (the XFree86 doctools package) and want to build
 * formatted docs from the SGML source, uncomment this.
 *
#define HasSgmlFmt		YES
 */

/*
 * To disable building some document formats, uncomment some of these.
 *
#define BuildLinuxDocText	NO
#define BuildLinuxDocHtml	NO
#define BuildLinuxDocPS		NO
 */

/*
 * To install Japanese versions of the documentation uncomment this.
 * Note: The Japanese documentation consists of a subset of the
 * XFree86 3.1 docs.
 *
#define InstallJapaneseDocs	YES
 */

/*
 * To build/install X specs docs, uncomment the following.
 * The SpecsDocDirs setting here is recommended because it covers
 * the docs that XFree86 has changed or added.
 *
#define BuildSpecsDocs		YES
#define SpecsDocDirs		CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n
 */

/*
 * To build all specs docs, not just those listed in SpecsDocDirs, uncomment
 * the following.
 *
#define BuildAllSpecsDocs	YES
 */

/*
 * If your system doesn't support vm86() mode and you have
 * libx86emu set library path here
 *
#define X86EMU_LIBPATH /usr/local/lib
 */ 

/*
 * Most platforms default to using an already installed FreeType 2 library.
 * To use the one included in this release instead, uncomment the following.
 *
#define HasFreetype2 NO
 */
#define HasFreetype2 NO

/* 
 * To use a FreeType library already installed outside the default search
 * paths, uncomment the following and set the path as needed.
 *
#define HasFreetype2 YES
#define Freetype2Dir /usr/local
 */


/*
 * Most platforms default to using an already installed Fontconfig library.
 * To use the one included in this release instead, uncomment the following.
 *
#define HasFontconfig NO
 */
#define HasFontconfig NO

/* 
 * To use a Fontconfig library already installed outside the default search
 * paths, uncomment the following and set the path as needed.
#define HasFontconfig YES
#define FontconfigDir /usr/local
 */


/*
 * Most platforms default to using an already installed Expat library.
 * To use the one included in this release instead, uncomment the following.
 *
#define HasExpat NO
 */
#define HasExpat NO

/* 
 * To use a Expat library already installed outside the default search
 * paths, uncomment the following and set the path as needed.
#define HasExpat YES
#define ExpatDir /usr/local
 */


/*
 * Most platforms default to using an already installed PNG library.
 * To use the one included in this release instead, uncomment the following.
 *
#define HasLibpng NO
 */

/* 
 * To use a PNG library already installed outside the default search
 * paths, uncomment the following and set the path as needed.
#define HasLibpng YES
#define LibpngDir /usr/local
 */


/*
 * Most platforms default to using an already installed xterm program.
 * To use the one included in this release instead, uncomment the following.
 *
#define BuildXterm YES
 */

#define SharedLibXau           NO

#define SharedLibXdmcp         NO

#define BuildXaw7              YES

#else /* #if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture) */

#if defined(DarwinArchitecture) && !defined(NXZaurusXServer) && !defined(NXiPAQXServer)
#define NXDarwinServer              NO
#define BuildServersOnly            YES
#define DefaultFontPath             /usr/NX/share/fonts/misc/,/usr/NX/share/fonts/TTF/
#define DefaultRGBDatabase          /usr/NX/share/rgb
#define XprtServer                  NO
#define BuildXprint                 NO
#define XnestServer                 NO
#define XVirtualFramebufferServer   NO
#define BuildFontServer             NO
#define BuildFreeType               NO
#define BuildXTrueType              NO
#define FontLibSharedFreeType       NO
#endif

#if !defined(NXZaurusXServer) && defined(NXiPAQXServer)
#define KDriveXServer               YES
#define XiPAQH3500Server            YES
#define BuildServersOnly            YES
#define NXEmbeddedXServer           YES
#define KdriveServerExtraDefines    -DITSY -DMAXSCREENS=1
#define TinyXServer                 YES
#define CrossCompiling              YES
#define TouchScreen                 YES
#define ItsyCompilerBug             YES
#undef  BuildRandR
#define BuildRandR                  YES
#define BuildXInputLib              YES
#define BuildXTrueType              YES
#define ServerXdmcpDefines
#define XipaqServer                 YES
#endif

#if !defined(NXiPAQXServer) && defined(NXZaurusXServer)
#define KDriveXServer               YES
#define XiPAQH3500Server            YES
#define BuildServersOnly            YES
#define ZaurusXServer               YES
#define NXEmbeddedXServer           YES
#define KdriveServerExtraDefines    -DITSY -DMAXSCREENS=1
#define TinyXServer                 YES
#define CrossCompiling              YES
#define TouchScreen                 YES
#define ItsyCompilerBug             YES
#undef  BuildRandR
#define BuildRandR                  YES
#define BuildXInputLib              YES
#define BuildXTrueType              YES
#define ServerXdmcpDefines
#define XipaqServer                 YES
#define XfbdevServer                YES
#endif

#endif /* #if !defined(NXZaurusXServer) && !defined(NXiPAQXServer) && !defined(DarwinArchitecture) */