svn merge ^/branches/released .

1 files changed, 307 insertions, 59 deletions

diff --git a/X11/extensions/Makefile.in b/X11/extensions/Makefile.in
index a30a0e982..81eaffd2a 100644
--- a/X11/extensions/Makefile.in
+++ b/X11/extensions/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -33,11 +33,14 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
 subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/xextproto.pc.in \
-	$(top_srcdir)/configure $(xext_HEADERS) COPYING ChangeLog \
-	install-sh missing
+DIST_COMMON = README $(am__configure_deps) $(compat_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/xextproto.pc.in $(top_srcdir)/configure \
+	$(xext_HEADERS) COPYING ChangeLog INSTALL config.guess \
+	config.sub install-sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
@@ -47,8 +50,21 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES = xextproto.pc
 CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
 SOURCES =
 DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -70,11 +86,18 @@ am__nobase_list = $(am__nobase_strip_setup); \
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)"
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(compatdir)" \
+	"$(DESTDIR)$(xextdir)"
 DATA = $(pkgconfig_DATA)
-HEADERS = $(xext_HEADERS)
+HEADERS = $(compat_HEADERS) $(xext_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -82,31 +105,86 @@ am__remove_distdir = \
   { test ! -d "$(distdir)" \
     || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
          && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
 CHANGELOG_CMD = @CHANGELOG_CMD@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FOP = @FOP@
+GREP = @GREP@
 INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
+MAN_SUBSTS = @MAN_SUBSTS@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
 MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -114,27 +192,44 @@ PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
+STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
 VERSION = @VERSION@
+XMLTO = @XMLTO@
+XORG_MAN_PAGE = @XORG_MAN_PAGE@
+XORG_SGML_PATH = @XORG_SGML_PATH@
+XSL_STYLESHEET = @XSL_STYLESHEET@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
 am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
+build = @build@
 build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
+host = @host@
 host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
@@ -158,6 +253,7 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
+SUBDIRS = specs
 xextdir = $(includedir)/X11/extensions
 xext_HEADERS = \
 	dpmsconst.h \
@@ -191,16 +287,26 @@ xext_HEADERS = \
 	xtestconst.h \
 	xtestproto.h
 
+
+#
+# These headers allow old servers to be built with
+# new headers
+#
+compatdir = $(xextdir)
+compat_HEADERS = \
+	shapestr.h \
+	shmstr.h \
+	syncstr.h
+
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = xextproto.pc
-EXTRA_DIST = xextproto.pc.in geproto.txt ChangeLog
-MAINTAINERCLEANFILES = ChangeLog
-all: all-am
+MAINTAINERCLEANFILES = ChangeLog INSTALL
+all: all-recursive
 
 .SUFFIXES:
 am--refresh:
 	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@@ -227,9 +333,9 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
 
-$(top_srcdir)/configure:  $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 $(am__aclocal_m4_deps):
 xextproto.pc: $(top_builddir)/config.status $(srcdir)/xextproto.pc.in
@@ -254,6 +360,26 @@ uninstall-pkgconfigDATA:
 	test -n "$$files" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+install-compatHEADERS: $(compat_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(compatdir)" || $(MKDIR_P) "$(DESTDIR)$(compatdir)"
+	@list='$(compat_HEADERS)'; test -n "$(compatdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(compatdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(compatdir)" || exit $$?; \
+	done
+
+uninstall-compatHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(compat_HEADERS)'; test -n "$(compatdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(compatdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(compatdir)" && rm -f $$files
 install-xextHEADERS: $(xext_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(xextdir)" || $(MKDIR_P) "$(DESTDIR)$(xextdir)"
@@ -275,6 +401,76 @@ uninstall-xextHEADERS:
 	echo " ( cd '$(DESTDIR)$(xextdir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(xextdir)" && rm -f $$files
 
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -285,10 +481,23 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -307,7 +516,7 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  fi; \
 	fi
 ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -359,11 +568,40 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
 	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
@@ -407,17 +645,17 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
-	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
@@ -477,21 +715,22 @@ distcleancheck: distclean
 	       $(distcleancheck_listfiles) ; \
 	       exit 1; } >&2
 check-am: all-am
-check: check-am
+check: check-recursive
 all-am: Makefile $(DATA) $(HEADERS)
-installdirs:
-	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xextdir)"; do \
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(compatdir)" "$(DESTDIR)$(xextdir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-installcheck: installcheck-am
+installcheck: installcheck-recursive
 install-strip:
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
@@ -509,99 +748,108 @@ maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
+clean: clean-recursive
 
 clean-am: clean-generic mostlyclean-am
 
-distclean: distclean-am
+distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -f Makefile
 distclean-am: clean-am distclean-generic distclean-tags
 
-dvi: dvi-am
+dvi: dvi-recursive
 
 dvi-am:
 
-html: html-am
+html: html-recursive
 
 html-am:
 
-info: info-am
+info: info-recursive
 
 info-am:
 
-install-data-am: install-pkgconfigDATA install-xextHEADERS
+install-data-am: install-compatHEADERS install-pkgconfigDATA \
+	install-xextHEADERS
 
-install-dvi: install-dvi-am
+install-dvi: install-dvi-recursive
 
 install-dvi-am:
 
 install-exec-am:
 
-install-html: install-html-am
+install-html: install-html-recursive
 
 install-html-am:
 
-install-info: install-info-am
+install-info: install-info-recursive
 
 install-info-am:
 
 install-man:
 
-install-pdf: install-pdf-am
+install-pdf: install-pdf-recursive
 
 install-pdf-am:
 
-install-ps: install-ps-am
+install-ps: install-ps-recursive
 
 install-ps-am:
 
 installcheck-am:
 
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
 
 mostlyclean-am: mostlyclean-generic
 
-pdf: pdf-am
+pdf: pdf-recursive
 
 pdf-am:
 
-ps: ps-am
+ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-pkgconfigDATA uninstall-xextHEADERS
+uninstall-am: uninstall-compatHEADERS uninstall-pkgconfigDATA \
+	uninstall-xextHEADERS
 
-.MAKE: install-am install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic ctags dist dist-all dist-bzip2 dist-gzip \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
 	dist-hook dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
 	distcheck distclean distclean-generic distclean-tags \
 	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-pkgconfigDATA install-ps install-ps-am install-strip \
-	install-xextHEADERS installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
-	uninstall-am uninstall-pkgconfigDATA uninstall-xextHEADERS
+	html-am info info-am install install-am install-compatHEADERS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip install-xextHEADERS installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+	uninstall-compatHEADERS uninstall-pkgconfigDATA \
+	uninstall-xextHEADERS
+
 
+.PHONY: ChangeLog INSTALL
 
-.PHONY: ChangeLog
+INSTALL:
+	$(INSTALL_CMD)
 
 ChangeLog:
 	$(CHANGELOG_CMD)
 
-dist-hook: ChangeLog
+dist-hook: ChangeLog INSTALL
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.