Added expat-2.1.0

27 files changed, 2810 insertions, 0 deletions

diff --git a/expat/bcb5/README.txt b/expat/bcb5/README.txt
new file mode 100644
index 000000000..486f1ca85
--- /dev/null
+++ b/expat/bcb5/README.txt
@@ -0,0 +1,87 @@
+
+                   Using a Borland compiler product
+
+The files in this directory support using both the free Borland command-line
+compiler tools and the Borland C++ Builder IDE.  The project files have been
+tested with both versions 5 and 6 of the C++ Builder product.
+
+             Using the free BCC32 command line compiler
+
+After downloading and installing the free C++ Builder commandline version,
+perform the following steps (assuming it was installed under C:\Borland\BCC55):
+
+1) Add "C:\Borland\BCC55\BIN" to your path
+2) Set the environment variable BCB to "C:\Borland\BCC55".
+3) edit makefile.mak: enable or comment out the appropriate commands under
+   clean & distclean, depending on whether your OS can use deltree /y or
+   del /s/f/q.
+
+After that, you should simply cd to the bcb5 directory in your Expat directory
+tree (same structure as CVS) and run "make all" or just "make".
+
+                               Naming
+
+The libraries have the base name "libexpat" followed optionally by an "s"
+(static) or a "w" (unicode version), then an underscore and optionally
+"mt" (multi-threaded) and "d" (dynamic RTL).
+
+To change the name of the library a project file produces, edit the project
+option source (see step 1 under Unicode below) and change the name contained in
+the PROJECT tag. In a make file, change the value assigned to the PROJECT
+variable. Also, the LIBRARY entry in the .def file has to be changed to
+correspond to the new executable name.
+
+
+                       Unicode Considerations
+
+There are no facilities in the BCB 5 GUI to create a unicode-enabled
+application. Fortunately, it is not hard to do by hand.
+
+1. The startup .obj system file must be changed to the unicode version.
+   Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change
+   c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the
+   following kludge will make the change stick. Close and save the file
+   (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on
+   the dialog immediately without changing anything in it. If this doesn't work,
+   you will have to close the project completely and edit the .bpr file by hand.
+
+   If you are using a make file, just change the startup .obj file assigned
+   to the ALLOBJ variable.
+
+2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options
+   dialog, Directories/Conditionals tab, in the Conditional define box. In a
+   make file, put it in the USERDEFINES variable.
+
+3. Of course, your code has to be written for unicode. As a start, the "main"
+   function is called "wmain". The tchar macros are an interesting way to
+   write code that can easily switch between unicode and utf-8. If these macros
+   are used, then simply adding the conditional define _UNICODE as well as
+   XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros.
+   Otherwise the utf-8 versions are used. xmlwf uses its own versions of the
+   tchar macros which are switched on and off by the XML_UNICODE macro, which
+   itself is set by the XML_UNICODE_WCHAR_T define.
+
+                              Threading
+
+The libexpat libraries are all built to link with the multi-threaded dynamic RTL's.
+That means they require CC32xxMT.DLL present on the installation target.
+To create single-threaded libs, do the following:
+
+1. The compiler option for multi-threading must be turned off. Following the
+   instructions above to edit the option source, remove the -tWM option from
+   the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable.
+
+2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or
+   variable (GUI or makefile repectively) to the version without the "mt" in the
+   name. For example, change cw32mti.lib to cw32i.lib.
+
+                              Static RTL's
+
+To build the libs with static RTL's do the following,
+
+1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the
+   "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the
+   options dialog, uncheck "Use dynamic RTL". If you are using a make file,
+   remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL
+   to the version without an "i" in the ALLLIB variable. For example,
+   cw32mti.lib would become cw32mt.lib.
diff --git a/expat/bcb5/all_projects.bpg b/expat/bcb5/all_projects.bpg
new file mode 100644
index 000000000..27c9a1cba
--- /dev/null
+++ b/expat/bcb5/all_projects.bpg
@@ -0,0 +1,49 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = setup libexpat_mtd.dll libexpats_mtd.lib libexpatw_mtd.dll \
+  libexpatws_mtd.lib elements.exe outline.exe xmlwf.exe
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+libexpat_mtd.dll: expat.bpr
+  $(ROOT)\bin\bpr2mak $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpats_mtd.lib: expat_static.bpr
+  $(ROOT)\bin\bpr2mak -t$(ROOT)\bin\deflib.bmk $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpatw_mtd.dll: expatw.bpr
+  $(ROOT)\bin\bpr2mak $**                                    
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpatws_mtd.lib: expatw_static.bpr
+  $(ROOT)\bin\bpr2mak -t$(ROOT)\bin\deflib.bmk $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+elements.exe: elements.bpr
+  $(ROOT)\bin\bpr2mak $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+outline.exe: outline.bpr
+  $(ROOT)\bin\bpr2mak $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+xmlwf.exe: xmlwf.bpr
+  $(ROOT)\bin\bpr2mak $**
+  $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+setup: setup.bat
+  call $**
+
+
diff --git a/expat/bcb5/elements.bpf b/expat/bcb5/elements.bpf
new file mode 100644
index 000000000..5c1e878d6
--- /dev/null
+++ b/expat/bcb5/elements.bpf
@@ -0,0 +1,4 @@
+USEUNIT("..\examples\elements.c");
+USELIB("Release\libexpats_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat/bcb5/elements.bpr b/expat/bcb5/elements.bpr
new file mode 100644
index 000000000..c21c0f59f
--- /dev/null
+++ b/expat/bcb5/elements.bpr
@@ -0,0 +1,149 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\elements.exe"/>
+    <OBJFILES value="Release\obj\examples\elements.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value=""/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value="Release\libexpats_mtd.lib"/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi 
+      ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi 
+      VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi 
+      dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+    <PATHCPP value=".;..\examples"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="ilink32"/>
+    <USERDEFINES value="WIN32;NDEBUG;_CONSOLE;XML_STATIC"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="elements.bpf"/>
+    <INCLUDEPATH value="..\examples;$(BCB)\include"/>
+    <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-par -w-8027 -w-8026"/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+    <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value="-IRelease\obj\examples -D&quot;&quot; -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC"/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\examples;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=8
+Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release-w_static
+Item4=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release_static
+Item5=$(BCB)\lib;$(RELEASELIBPATH);C:\src\expat\lib\Release_static
+Item6=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item7=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=17
+Item0=WIN32;NDEBUG;_CONSOLE;XML_STATIC
+Item1=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC
+Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC
+Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG
+Item5=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG
+Item6=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;_UNICODE
+Item7=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item8=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item9=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item10=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE
+Item11=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;__WCHAR_T
+Item12=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item13=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE;_UNICODE
+Item14=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE
+Item15=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG
+Item16=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC
+
+[HistoryLists\hlIntOutputDir]
+Count=5
+Item0=Release\obj\examples
+Item1=Release\obj\elements
+Item2=Release\obj\mts
+Item3=..\examples\Release
+Item4=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/elements.mak b/expat/bcb5/elements.mak
new file mode 100644
index 000000000..d4427fd51
--- /dev/null
+++ b/expat/bcb5/elements.mak
@@ -0,0 +1,186 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\elements.exe
+OBJFILES = Release\obj\examples\elements.obj
+RESFILES = 
+MAINSOURCE = elements.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpats_mtd.lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+    ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+    VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+    dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\examples
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = WIN32;NDEBUG;_CONSOLE;XML_STATIC
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\examples;$(BCB)\include
+LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/expat.bpf b/expat/bcb5/expat.bpf
new file mode 100644
index 000000000..2c423283f
--- /dev/null
+++ b/expat/bcb5/expat.bpf
@@ -0,0 +1,6 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+USEDEF("libexpat_mtd.def");
+//---------------------------------------------------------------------------
+#define DllEntryPoint
diff --git a/expat/bcb5/expat.bpr b/expat/bcb5/expat.bpr
new file mode 100644
index 000000000..291b8cafc
--- /dev/null
+++ b/expat/bcb5/expat.bpr
@@ -0,0 +1,140 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\libexpat_mtd.dll"/>
+    <OBJFILES value="Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj 
+      Release\obj\libexpat\xmltok.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value="libexpat_mtd.def"/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value=""/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi 
+      ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi 
+      VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi 
+      dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+    <PATHCPP value=".;..\lib"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="ilink32"/>
+    <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="expat.bpf"/>
+    <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+    <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/>
+    <PFLAGS value="-N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value="-IRelease\obj\libexpat -D&quot;&quot; -aa -Tpd -x -Gn -Gi -q"/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="c0d32.obj $(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=8
+Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP
+Item4=NDEBUG;WIN32;_WINDOWS;_USRDLL;_DEBUG;EXPAT_EXPORTS;COMPILED_FROM_DSP
+Item5=NDEBUG;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG
+Item6=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG
+Item7=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP
+
+[HistoryLists\hlIntOutputDir]
+Count=7
+Item0=Release\obj\libexpat
+Item1=Release\obj\libexpat_static
+Item2=Release\obj\mtd
+Item3=Release\obj\mt
+Item4=Release\obj
+Item5=Release
+Item6=..\lib\Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/expat.mak b/expat/bcb5/expat.mak
new file mode 100644
index 000000000..7c9c23f52
--- /dev/null
+++ b/expat/bcb5/expat.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpat_mtd.dll
+OBJFILES = Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj \
+    Release\obj\libexpat\xmltok.obj
+RESFILES = 
+MAINSOURCE = expat.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = 
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+    ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+    VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+    dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS = 
+DEFFILE = libexpat_mtd.def
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\libexpat -D"" -aa -Tpd -x -Gn -Gi -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/expat_static.bpf b/expat/bcb5/expat_static.bpf
new file mode 100644
index 000000000..5ca458edc
--- /dev/null
+++ b/expat/bcb5/expat_static.bpf
@@ -0,0 +1,5 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+//---------------------------------------------------------------------------
+#define Library
diff --git a/expat/bcb5/expat_static.bpr b/expat/bcb5/expat_static.bpr
new file mode 100644
index 000000000..2f6ec4d3b
--- /dev/null
+++ b/expat/bcb5/expat_static.bpr
@@ -0,0 +1,143 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\libexpats_mtd.lib"/>
+    <OBJFILES value="Release\obj\libexpat_static\xmlparse.obj 
+      Release\obj\libexpat_static\xmlrole.obj 
+      Release\obj\libexpat_static\xmltok.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value=""/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value=""/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value=""/>
+    <PATHCPP value=".;..\lib"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="TLib"/>
+    <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="expat_static.bpf"/>
+    <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+    <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+    <LISTFILE value=""/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/>
+    <PFLAGS value="-N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value=""/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="$(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=7
+Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item3=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG
+Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP
+Item5=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_MBCS
+Item6=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP
+
+[HistoryLists\hlIntOutputDir]
+Count=6
+Item0=Release\obj\libexpat_static
+Item1=Release\obj\mts
+Item2=Release\obj\mt
+Item3=Release
+Item4=..\lib\Release_static
+Item5=Release_static
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=Release_static\
+
+[HistoryLists\hlTlibPageSize]
+Count=1
+Item0=0x0010
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/expat_static.mak b/expat/bcb5/expat_static.mak
new file mode 100644
index 000000000..9137d3b53
--- /dev/null
+++ b/expat/bcb5/expat_static.mak
@@ -0,0 +1,189 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpats_mtd.lib
+OBJFILES = Release\obj\libexpat_static\xmlparse.obj \
+    Release\obj\libexpat_static\xmlrole.obj \
+    Release\obj\libexpat_static\xmltok.obj
+RESFILES = 
+MAINSOURCE = expat_static.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = 
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+LINKER = TLib
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc
+LISTFILE = 
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = 
+# ---------------------------------------------------------------------------
+ALLOBJ = $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES)
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!if "$(LISTFILE)" ==  ""
+COMMA =
+!else
+COMMA = ,
+!endif
+
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) /u $@ @&&!
+    $(LFLAGS) $? $(COMMA) $(LISTFILE)
+
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/expatw.bpf b/expat/bcb5/expatw.bpf
new file mode 100644
index 000000000..188a6d54e
--- /dev/null
+++ b/expat/bcb5/expatw.bpf
@@ -0,0 +1,6 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+USEDEF("libexpatw_mtd.def");
+//---------------------------------------------------------------------------
+#define DllEntryPoint
diff --git a/expat/bcb5/expatw.bpr b/expat/bcb5/expatw.bpr
new file mode 100644
index 000000000..9ec50010b
--- /dev/null
+++ b/expat/bcb5/expatw.bpr
@@ -0,0 +1,146 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\libexpatw_mtd.dll"/>
+    <OBJFILES value="Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj 
+      Release\obj\libexpatw\xmltok.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value="libexpatw_mtd.def"/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value=""/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi 
+      ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi 
+      VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi 
+      dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+    <PATHCPP value=".;..\lib"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="ilink32"/>
+    <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="expatw.bpf"/>
+    <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+    <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/>
+    <PFLAGS value="-N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value="-IRelease\obj\libexpatw -D&quot;&quot; -aa -Tpd -x -Gn -Gi -w -q"/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="c0d32w.obj $(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=9
+Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item2=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item3=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;_DEBUG;XML_UNICODE_WCHAR_T
+Item4=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG
+Item5=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG
+Item6=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item7=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;XML_UNICODE
+Item8=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+
+[HistoryLists\hlIntOutputDir]
+Count=8
+Item0=Release\obj\libexpatw
+Item1=Release\obj\libexpat
+Item2=Release\obj\mtd
+Item3=Release\obj\mt
+Item4=Release_w\obj
+Item5=Release-w\obj
+Item6=Release-w
+Item7=..\lib\Release-w
+
+[HistoryLists\hlFinalOutputDir]
+Count=5
+Item0=Release\
+Item1=Release
+Item2=Release_w\
+Item3=Release-w\
+Item4=Release-w
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/expatw.mak b/expat/bcb5/expatw.mak
new file mode 100644
index 000000000..08e17d003
--- /dev/null
+++ b/expat/bcb5/expatw.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpatw_mtd.dll
+OBJFILES = Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj \
+    Release\obj\libexpatw\xmltok.obj
+RESFILES = 
+MAINSOURCE = expatw.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = 
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+    ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+    VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+    dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS = 
+DEFFILE = libexpatw_mtd.def
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\libexpatw -D"" -aa -Tpd -x -Gn -Gi -w -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32w.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/expatw_static.bpf b/expat/bcb5/expatw_static.bpf
new file mode 100644
index 000000000..5ca458edc
--- /dev/null
+++ b/expat/bcb5/expatw_static.bpf
@@ -0,0 +1,5 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+//---------------------------------------------------------------------------
+#define Library
diff --git a/expat/bcb5/expatw_static.bpr b/expat/bcb5/expatw_static.bpr
new file mode 100644
index 000000000..3f12644b6
--- /dev/null
+++ b/expat/bcb5/expatw_static.bpr
@@ -0,0 +1,152 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\libexpatws_mtd.lib"/>
+    <OBJFILES value="Release\obj\libexpatw_static\xmlparse.obj 
+      Release\obj\libexpatw_static\xmlrole.obj 
+      Release\obj\libexpatw_static\xmltok.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value=""/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value=""/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value=""/>
+    <PATHCPP value=".;..\lib"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="TLib"/>
+    <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="expatw_static.bpf"/>
+    <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+    <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+    <LISTFILE value=""/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/>
+    <PFLAGS value="-N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L- 
+      -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value=""/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="$(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=15
+Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;XML_STATIC;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T
+Item5=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG
+Item6=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__cplusplus
+Item7=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG
+Item8=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG
+Item9=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__WCHAR_T
+Item10=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;_UNICODE
+Item11=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG;_UNICODE
+Item12=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG
+Item13=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item14=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;XML_UNICODE
+
+[HistoryLists\hlIntOutputDir]
+Count=6
+Item0=Release\obj\libexpatw_static
+Item1=Release\obj\libexpat_static
+Item2=Release\obj\mts
+Item3=Release\obj\mt
+Item4=..\lib\Release-w_static
+Item5=Release-w_static
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=Release-w_static\
+
+[HistoryLists\hlTlibPageSize]
+Count=1
+Item0=0x0010
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/expatw_static.mak b/expat/bcb5/expatw_static.mak
new file mode 100644
index 000000000..16b7e5b90
--- /dev/null
+++ b/expat/bcb5/expatw_static.mak
@@ -0,0 +1,190 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpatws_mtd.lib
+OBJFILES = Release\obj\libexpatw_static\xmlparse.obj \
+    Release\obj\libexpatw_static\xmlrole.obj \
+    Release\obj\libexpatw_static\xmltok.obj
+RESFILES = 
+MAINSOURCE = expatw_static.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = 
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = 
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+LINKER = TLib
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc
+LISTFILE = 
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L- \
+    -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = 
+# ---------------------------------------------------------------------------
+ALLOBJ = $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES)
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!if "$(LISTFILE)" ==  ""
+COMMA =
+!else
+COMMA = ,
+!endif
+
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) /u $@ @&&!
+    $(LFLAGS) $? $(COMMA) $(LISTFILE)
+
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/libexpat_mtd.def b/expat/bcb5/libexpat_mtd.def
new file mode 100644
index 000000000..fc1cb9554
--- /dev/null
+++ b/expat/bcb5/libexpat_mtd.def
@@ -0,0 +1,141 @@
+; DEF file for BCB5
+LIBRARY   LIBEXPAT_MTD
+DESCRIPTION "Implements an XML parser."
+EXPORTS
+  _XML_DefaultCurrent @1
+  _XML_ErrorString @2
+  _XML_ExpatVersion @3
+  _XML_ExpatVersionInfo @4
+  _XML_ExternalEntityParserCreate @5
+  _XML_GetBase @6
+  _XML_GetBuffer @7
+  _XML_GetCurrentByteCount @8
+  _XML_GetCurrentByteIndex @9
+  _XML_GetCurrentColumnNumber @10
+  _XML_GetCurrentLineNumber @11
+  _XML_GetErrorCode @12
+  _XML_GetIdAttributeIndex @13
+  _XML_GetInputContext @14
+  _XML_GetSpecifiedAttributeCount @15
+  _XML_Parse @16
+  _XML_ParseBuffer @17
+  _XML_ParserCreate @18
+  _XML_ParserCreateNS @19
+  _XML_ParserCreate_MM @20
+  _XML_ParserFree @21
+  _XML_SetAttlistDeclHandler @22
+  _XML_SetBase @23
+  _XML_SetCdataSectionHandler @24
+  _XML_SetCharacterDataHandler @25
+  _XML_SetCommentHandler @26
+  _XML_SetDefaultHandler @27
+  _XML_SetDefaultHandlerExpand @28
+  _XML_SetDoctypeDeclHandler @29
+  _XML_SetElementDeclHandler @30
+  _XML_SetElementHandler @31
+  _XML_SetEncoding @32
+  _XML_SetEndCdataSectionHandler @33
+  _XML_SetEndDoctypeDeclHandler @34
+  _XML_SetEndElementHandler @35
+  _XML_SetEndNamespaceDeclHandler @36
+  _XML_SetEntityDeclHandler @37
+  _XML_SetExternalEntityRefHandler @38
+  _XML_SetExternalEntityRefHandlerArg @39
+  _XML_SetNamespaceDeclHandler @40
+  _XML_SetNotStandaloneHandler @41
+  _XML_SetNotationDeclHandler @42
+  _XML_SetParamEntityParsing @43
+  _XML_SetProcessingInstructionHandler @44
+  _XML_SetReturnNSTriplet @45
+  _XML_SetStartCdataSectionHandler @46
+  _XML_SetStartDoctypeDeclHandler @47
+  _XML_SetStartElementHandler @48
+  _XML_SetStartNamespaceDeclHandler @49
+  _XML_SetUnknownEncodingHandler @50
+  _XML_SetUnparsedEntityDeclHandler @51
+  _XML_SetUserData @52
+  _XML_SetXmlDeclHandler @53
+  _XML_UseParserAsHandlerArg @54
+; added with version 1.95.3
+  _XML_ParserReset @55
+  _XML_SetSkippedEntityHandler @56
+; added with version 1.95.5
+  _XML_GetFeatureList @57
+  _XML_UseForeignDTD @58
+; added with version 1.95.6
+  _XML_FreeContentModel @59
+  _XML_MemMalloc @60
+  _XML_MemRealloc @61
+  _XML_MemFree @62
+; added with version 1.95.8
+  _XML_StopParser @63
+  _XML_ResumeParser @64
+  _XML_GetParsingStatus @65
+
+; Aliases for MS compatible names
+  XML_DefaultCurrent = _XML_DefaultCurrent
+  XML_ErrorString = _XML_ErrorString
+  XML_ExpatVersion = _XML_ExpatVersion
+  XML_ExpatVersionInfo = _XML_ExpatVersionInfo
+  XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate
+  XML_GetBase = _XML_GetBase
+  XML_GetBuffer = _XML_GetBuffer
+  XML_GetCurrentByteCount = _XML_GetCurrentByteCount
+  XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex
+  XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber
+  XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber
+  XML_GetErrorCode = _XML_GetErrorCode
+  XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex
+  XML_GetInputContext = _XML_GetInputContext
+  XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount
+  XML_Parse = _XML_Parse
+  XML_ParseBuffer = _XML_ParseBuffer
+  XML_ParserCreate = _XML_ParserCreate
+  XML_ParserCreateNS = _XML_ParserCreateNS
+  XML_ParserCreate_MM = _XML_ParserCreate_MM
+  XML_ParserFree = _XML_ParserFree
+  XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler
+  XML_SetBase = _XML_SetBase
+  XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler
+  XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler
+  XML_SetCommentHandler = _XML_SetCommentHandler
+  XML_SetDefaultHandler = _XML_SetDefaultHandler
+  XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand
+  XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler
+  XML_SetElementDeclHandler = _XML_SetElementDeclHandler
+  XML_SetElementHandler = _XML_SetElementHandler
+  XML_SetEncoding = _XML_SetEncoding
+  XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler
+  XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler
+  XML_SetEndElementHandler = _XML_SetEndElementHandler
+  XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler
+  XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler
+  XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler
+  XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg
+  XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler
+  XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler
+  XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler
+  XML_SetParamEntityParsing = _XML_SetParamEntityParsing
+  XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler
+  XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet
+  XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler
+  XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler
+  XML_SetStartElementHandler = _XML_SetStartElementHandler
+  XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler
+  XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler
+  XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler
+  XML_SetUserData = _XML_SetUserData
+  XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler
+  XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg
+  XML_ParserReset = _XML_ParserReset
+  XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler
+  XML_GetFeatureList = _XML_GetFeatureList
+  XML_UseForeignDTD = _XML_UseForeignDTD
+  XML_FreeContentModel = _XML_FreeContentModel
+  XML_MemMalloc = _XML_MemMalloc
+  XML_MemRealloc = _XML_MemRealloc
+  XML_MemFree = _XML_MemFree
+  XML_StopParser = _XML_StopParser
+  XML_ResumeParser = _XML_ResumeParser
+  XML_GetParsingStatus = _XML_GetParsingStatus
+
diff --git a/expat/bcb5/libexpatw_mtd.def b/expat/bcb5/libexpatw_mtd.def
new file mode 100644
index 000000000..418462df5
--- /dev/null
+++ b/expat/bcb5/libexpatw_mtd.def
@@ -0,0 +1,140 @@
+; DEF file for BCB5
+LIBRARY   LIBEXPATW_MTD
+DESCRIPTION "Implements an XML parser."
+EXPORTS
+  _XML_DefaultCurrent @1
+  _XML_ErrorString @2
+  _XML_ExpatVersion @3
+  _XML_ExpatVersionInfo @4
+  _XML_ExternalEntityParserCreate @5
+  _XML_GetBase @6
+  _XML_GetBuffer @7
+  _XML_GetCurrentByteCount @8
+  _XML_GetCurrentByteIndex @9
+  _XML_GetCurrentColumnNumber @10
+  _XML_GetCurrentLineNumber @11
+  _XML_GetErrorCode @12
+  _XML_GetIdAttributeIndex @13
+  _XML_GetInputContext @14
+  _XML_GetSpecifiedAttributeCount @15
+  _XML_Parse @16
+  _XML_ParseBuffer @17
+  _XML_ParserCreate @18
+  _XML_ParserCreateNS @19
+  _XML_ParserCreate_MM @20
+  _XML_ParserFree @21
+  _XML_SetAttlistDeclHandler @22
+  _XML_SetBase @23
+  _XML_SetCdataSectionHandler @24
+  _XML_SetCharacterDataHandler @25
+  _XML_SetCommentHandler @26
+  _XML_SetDefaultHandler @27
+  _XML_SetDefaultHandlerExpand @28
+  _XML_SetDoctypeDeclHandler @29
+  _XML_SetElementDeclHandler @30
+  _XML_SetElementHandler @31
+  _XML_SetEncoding @32
+  _XML_SetEndCdataSectionHandler @33
+  _XML_SetEndDoctypeDeclHandler @34
+  _XML_SetEndElementHandler @35
+  _XML_SetEndNamespaceDeclHandler @36
+  _XML_SetEntityDeclHandler @37
+  _XML_SetExternalEntityRefHandler @38
+  _XML_SetExternalEntityRefHandlerArg @39
+  _XML_SetNamespaceDeclHandler @40
+  _XML_SetNotStandaloneHandler @41
+  _XML_SetNotationDeclHandler @42
+  _XML_SetParamEntityParsing @43
+  _XML_SetProcessingInstructionHandler @44
+  _XML_SetReturnNSTriplet @45
+  _XML_SetStartCdataSectionHandler @46
+  _XML_SetStartDoctypeDeclHandler @47
+  _XML_SetStartElementHandler @48
+  _XML_SetStartNamespaceDeclHandler @49
+  _XML_SetUnknownEncodingHandler @50
+  _XML_SetUnparsedEntityDeclHandler @51
+  _XML_SetUserData @52
+  _XML_SetXmlDeclHandler @53
+  _XML_UseParserAsHandlerArg @54
+; added with version 1.95.3
+  _XML_ParserReset @55
+  _XML_SetSkippedEntityHandler @56
+; added with version 1.95.5
+  _XML_GetFeatureList @57
+  _XML_UseForeignDTD @58
+; added with version 1.95.6
+  _XML_FreeContentModel @59
+  _XML_MemMalloc @60
+  _XML_MemRealloc @61
+  _XML_MemFree @62
+; added with version 1.95.8
+  _XML_StopParser @63
+  _XML_ResumeParser @64
+  _XML_GetParsingStatus @65
+
+; Aliases for MS compatible names
+  XML_DefaultCurrent = _XML_DefaultCurrent
+  XML_ErrorString = _XML_ErrorString
+  XML_ExpatVersion = _XML_ExpatVersion
+  XML_ExpatVersionInfo = _XML_ExpatVersionInfo
+  XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate
+  XML_GetBase = _XML_GetBase
+  XML_GetBuffer = _XML_GetBuffer
+  XML_GetCurrentByteCount = _XML_GetCurrentByteCount
+  XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex
+  XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber
+  XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber
+  XML_GetErrorCode = _XML_GetErrorCode
+  XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex
+  XML_GetInputContext = _XML_GetInputContext
+  XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount
+  XML_Parse = _XML_Parse
+  XML_ParseBuffer = _XML_ParseBuffer
+  XML_ParserCreate = _XML_ParserCreate
+  XML_ParserCreateNS = _XML_ParserCreateNS
+  XML_ParserCreate_MM = _XML_ParserCreate_MM
+  XML_ParserFree = _XML_ParserFree
+  XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler
+  XML_SetBase = _XML_SetBase
+  XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler
+  XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler
+  XML_SetCommentHandler = _XML_SetCommentHandler
+  XML_SetDefaultHandler = _XML_SetDefaultHandler
+  XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand
+  XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler
+  XML_SetElementDeclHandler = _XML_SetElementDeclHandler
+  XML_SetElementHandler = _XML_SetElementHandler
+  XML_SetEncoding = _XML_SetEncoding
+  XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler
+  XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler
+  XML_SetEndElementHandler = _XML_SetEndElementHandler
+  XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler
+  XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler
+  XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler
+  XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg
+  XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler
+  XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler
+  XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler
+  XML_SetParamEntityParsing = _XML_SetParamEntityParsing
+  XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler
+  XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet
+  XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler
+  XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler
+  XML_SetStartElementHandler = _XML_SetStartElementHandler
+  XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler
+  XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler
+  XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler
+  XML_SetUserData = _XML_SetUserData
+  XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler
+  XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg
+  XML_ParserReset = _XML_ParserReset
+  XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler
+  XML_GetFeatureList = _XML_GetFeatureList
+  XML_UseForeignDTD = _XML_UseForeignDTD
+  XML_FreeContentModel = _XML_FreeContentModel
+  XML_MemMalloc = _XML_MemMalloc
+  XML_MemRealloc = _XML_MemRealloc
+  XML_MemFree = _XML_MemFree
+  XML_StopParser = _XML_StopParser
+  XML_ResumeParser = _XML_ResumeParser
+  XML_GetParsingStatus = _XML_GetParsingStatus
diff --git a/expat/bcb5/makefile.mak b/expat/bcb5/makefile.mak
new file mode 100644
index 000000000..548815eaf
--- /dev/null
+++ b/expat/bcb5/makefile.mak
@@ -0,0 +1,37 @@
+all: setup expat expatw expat_static expatw_static elements outline xmlwf
+
+setup:
+ setup
+
+expat:
+ make -l -fexpat.mak
+
+expatw:
+ make -l -fexpatw.mak
+
+expat_static:
+ make -l -fexpat_static.mak
+
+expatw_static:
+ make -l -fexpatw_static.mak
+
+elements:
+ make -l -felements.mak
+
+outline:
+ make -l -foutline.mak
+
+xmlwf:
+ make -l -fxmlwf.mak
+
+clean:
+# works on Win98/ME
+# deltree /y release\obj
+# works on WinNT/2000
+ del /s/f/q release\obj
+
+distclean:
+# works on Win98/ME
+# deltree /y release\*.*
+# works on WinNT/2000
+ del /s/f/q release\*
diff --git a/expat/bcb5/outline.bpf b/expat/bcb5/outline.bpf
new file mode 100644
index 000000000..52dce8301
--- /dev/null
+++ b/expat/bcb5/outline.bpf
@@ -0,0 +1,4 @@
+USEUNIT("..\examples\outline.c");
+USELIB("Release\libexpat_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat/bcb5/outline.bpr b/expat/bcb5/outline.bpr
new file mode 100644
index 000000000..e0ae5cdee
--- /dev/null
+++ b/expat/bcb5/outline.bpr
@@ -0,0 +1,132 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\outline.exe"/>
+    <OBJFILES value="Release\obj\examples\outline.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value=""/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value="Release\libexpat_mtd.lib"/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi 
+      ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi 
+      VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi 
+      dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+    <PATHCPP value=".;..\examples"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="ilink32"/>
+    <USERDEFINES value="WIN32;NDEBUG;_CONSOLE"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="outline.bpf"/>
+    <INCLUDEPATH value="..\examples;$(BCB)\include"/>
+    <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-par -w-8027 -w-8026"/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+    <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value="-IRelease\obj\examples -D&quot;&quot; -ap -Tpe -x -Gn -q"/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=3
+Item0=..\examples;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=4
+Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=6
+Item0=WIN32;NDEBUG;_CONSOLE
+Item1=WIN32;NDEBUG;_CONSOLE;XML_STATIC
+Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC
+Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC
+Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item5=WIN32;NDEBUG;_CONSOLE;_DEBUG
+
+[HistoryLists\hlIntOutputDir]
+Count=4
+Item0=Release\obj\examples
+Item1=Release\obj\outline
+Item2=..\examples\Release
+Item3=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/outline.mak b/expat/bcb5/outline.mak
new file mode 100644
index 000000000..510b541f6
--- /dev/null
+++ b/expat/bcb5/outline.mak
@@ -0,0 +1,186 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\outline.exe
+OBJFILES = Release\obj\examples\outline.obj
+RESFILES = 
+MAINSOURCE = outline.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpat_mtd.lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+    ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+    VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+    dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\examples
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = WIN32;NDEBUG;_CONSOLE
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\examples;$(BCB)\include
+LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat/bcb5/setup.bat b/expat/bcb5/setup.bat
new file mode 100644
index 000000000..6f4b57317
--- /dev/null
+++ b/expat/bcb5/setup.bat
@@ -0,0 +1,9 @@
+REM CommandInterpreter: $(COMSPEC)
+if not exist .\release\nul mkdir release
+if not exist .\release\obj\nul mkdir release\obj
+if not exist .\release\obj\libexpat\nul mkdir release\obj\libexpat
+if not exist .\release\obj\libexpatw\nul mkdir release\obj\libexpatw
+if not exist .\release\obj\libexpat_static\nul mkdir release\obj\libexpat_static
+if not exist .\release\obj\libexpatw_static\nul mkdir release\obj\libexpatw_static
+if not exist .\release\obj\examples\nul mkdir release\obj\examples
+if not exist .\release\obj\xmlwf\nul mkdir release\obj\xmlwf
diff --git a/expat/bcb5/xmlwf.bpf b/expat/bcb5/xmlwf.bpf
new file mode 100644
index 000000000..d06208e81
--- /dev/null
+++ b/expat/bcb5/xmlwf.bpf
@@ -0,0 +1,7 @@
+USEUNIT("..\xmlwf\codepage.c");
+USEUNIT("..\xmlwf\win32filemap.c");
+USEUNIT("..\xmlwf\xmlfile.c");
+USEUNIT("..\xmlwf\xmlwf.c");
+USELIB("Release\libexpat_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat/bcb5/xmlwf.bpr b/expat/bcb5/xmlwf.bpr
new file mode 100644
index 000000000..d33a15387
--- /dev/null
+++ b/expat/bcb5/xmlwf.bpr
@@ -0,0 +1,136 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+  <MACROS>
+    <VERSION value="BCB.05.03"/>
+    <PROJECT value="Release\xmlwf.exe"/>
+    <OBJFILES value="Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj 
+      Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj"/>
+    <RESFILES value=""/>
+    <IDLFILES value=""/>
+    <IDLGENFILES value=""/>
+    <DEFFILE value=""/>
+    <RESDEPEN value="$(RESFILES)"/>
+    <LIBFILES value="Release\libexpat_mtd.lib"/>
+    <LIBRARIES value=""/>
+    <SPARELIBS value=""/>
+    <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi 
+      ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi 
+      VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi 
+      dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+    <PATHCPP value=".;..\xmlwf"/>
+    <PATHPAS value=".;"/>
+    <PATHRC value=".;"/>
+    <PATHASM value=".;"/>
+    <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+    <RELEASELIBPATH value="$(BCB)\lib\release"/>
+    <LINKER value="ilink32"/>
+    <USERDEFINES value="NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP"/>
+    <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+    <MAINSOURCE value="xmlwf.bpf"/>
+    <INCLUDEPATH value="..\xmlwf;$(BCB)\include"/>
+    <LIBPATH value="..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)"/>
+    <WARNINGS value="-w-8065 -w-par -w-8027 -w-8026"/>
+  </MACROS>
+  <OPTIONS>
+    <IDLCFLAGS value="-I$(BCB)\include"/>
+    <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+    <PFLAGS value="-N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D-"/>
+    <RFLAGS value="/l 0x409 /d &quot;NDEBUG&quot; /i$(BCB)\include"/>
+    <AFLAGS value="/mx /w2 /zn"/>
+    <LFLAGS value="-IRelease\obj\xmlwf -D&quot;&quot; -ap -Tpe -x -Gn -q"/>
+  </OPTIONS>
+  <LINKER>
+    <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+    <ALLRES value="$(RESFILES)"/>
+    <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+  </LINKER>
+  <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\xmlwf;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\xmlwf;$(BCB)\lib;..\xmlwf\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=6
+Item0=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP
+Item1=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item2=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T
+Item3=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG
+Item4=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE;XML_UNICODE_WCHAR_T
+Item5=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE
+
+[HistoryLists\hlIntOutputDir]
+Count=3
+Item0=Release\obj\xmlwf
+Item1=..\xmlwf\Release
+Item2=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=.\Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=sample.xml
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+  </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat/bcb5/xmlwf.mak b/expat/bcb5/xmlwf.mak
new file mode 100644
index 000000000..f74126e45
--- /dev/null
+++ b/expat/bcb5/xmlwf.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\xmlwf.exe
+OBJFILES = Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj \
+    Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj
+RESFILES = 
+MAINSOURCE = xmlwf.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpat_mtd.lib
+IDLFILES = 
+IDLGENFILES = 
+LIBRARIES = 
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+    ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+    VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+    dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS = 
+DEFFILE = 
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\xmlwf
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\xmlwf;$(BCB)\include
+LIBPATH = ..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-8065 -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\xmlwf -D"" -ap -Tpe -x -Gn -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) -L$(LIBPATH) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+    $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+