svn merge file:///D:/svnrepos/vcxsrv/branches/released .

1 files changed, 151 insertions, 59 deletions

diff --git a/libX11/nls/Makefile.in b/libX11/nls/Makefile.in
index b13e282fc..395bcb21c 100644
--- a/libX11/nls/Makefile.in
+++ b/libX11/nls/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -20,8 +21,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -48,6 +50,7 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h \
 	$(top_builddir)/include/X11/XlibConf.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -62,16 +65,58 @@ am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(x11localedir)"
-x11localeDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(x11locale_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
@@ -87,27 +132,26 @@ BIGFONT_CFLAGS = @BIGFONT_CFLAGS@
 BIGFONT_LIBS = @BIGFONT_LIBS@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
 CFLAGS = @CFLAGS@
+CHANGELOG_CMD = @CHANGELOG_CMD@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
+CWARNFLAGS = @CWARNFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DOLT_BASH = @DOLT_BASH@
 DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
 DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
 GREP = @GREP@
@@ -119,6 +163,7 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 KEYSYMDEF = @KEYSYMDEF@
 LAUNCHD = @LAUNCHD@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
@@ -128,7 +173,10 @@ LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LINT = @LINT@
 LINTLIB = @LINTLIB@
 LINT_FLAGS = @LINT_FLAGS@
+LIPO = @LIPO@
 LN_S = @LN_S@
+LTCOMPILE = @LTCOMPILE@
+LTCXXCOMPILE = @LTCXXCOMPILE@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
@@ -136,8 +184,12 @@ MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@
 MISC_MAN_DIR = @MISC_MAN_DIR@
 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -177,17 +229,14 @@ XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@
 XPROTO_CFLAGS = @XPROTO_CFLAGS@
 XPROTO_LIBS = @XPROTO_LIBS@
 XTHREADLIB = @XTHREADLIB@
-XTHREADS = @XTHREADS@
 XTHREAD_CFLAGS = @XTHREAD_CFLAGS@
 XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@
-XUSE_MTSAFE_API = @XUSE_MTSAFE_API@
 abs_builddir = @abs_builddir@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -202,6 +251,7 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
+distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
@@ -218,6 +268,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -230,6 +281,7 @@ sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 x11localedir = $(X11_LOCALEDATADIR)
@@ -247,6 +299,7 @@ SUBDIRS = \
 	C			\
 	el_GR.UTF-8		\
 	en_US.UTF-8		\
+	fi_FI.UTF-8		\
 	georgian-academy	\
 	georgian-ps		\
 	ibm-cp1133		\
@@ -284,6 +337,7 @@ SUBDIRS = \
 	mulelao-1		\
 	nokhchi-1		\
 	pt_BR.UTF-8		\
+	ru_RU.UTF-8		\
 	tatar-cyr		\
 	th_TH			\
 	th_TH.UTF-8		\
@@ -316,6 +370,7 @@ CPP_SED_MAGIC = $(SED) -e '/^\#  *[0-9][0-9]*  *.*$$/d' \
                        -e '/^[         ]*XCOMM$$/s/XCOMM/\#/' \
                        -e '/^[         ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/\#/' \
                        -e '/^[         ]*XHASH/s/XHASH/\#/' \
+                       -e 's,X11_LOCALEDATADIR,$(X11_LOCALEDATADIR),g' \
                        -e '/\@\@$$/s/\@\@$$/\\/'
 
 all: all-recursive
@@ -326,14 +381,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  nls/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  nls/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign nls/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign nls/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -351,6 +406,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -360,20 +416,23 @@ clean-libtool:
 install-x11localeDATA: $(x11locale_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(x11localedir)" || $(MKDIR_P) "$(DESTDIR)$(x11localedir)"
-	@list='$(x11locale_DATA)'; for p in $$list; do \
+	@list='$(x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(x11localeDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(x11localedir)/$$f'"; \
-	  $(x11localeDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(x11localedir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(x11localedir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(x11localedir)" || exit $$?; \
 	done
 
 uninstall-x11localeDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(x11locale_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(x11localedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(x11localedir)/$$f"; \
-	done
+	@list='$(x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(x11localedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(x11localedir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -399,7 +458,7 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -433,16 +492,16 @@ $(RECURSIVE_CLEAN_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -450,14 +509,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -469,7 +528,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -478,29 +537,34 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -521,29 +585,44 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -577,6 +656,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -595,6 +675,8 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -603,18 +685,28 @@ install-data-am: install-x11localeDATA
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -635,8 +727,8 @@ ps-am:
 
 uninstall-am: uninstall-x11localeDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -654,9 +746,8 @@ uninstall-am: uninstall-x11localeDATA
 	uninstall-x11localeDATA
 
 
-# Allow people to comment out lines by starting them with '##'
 .pre:
-	$(SED) -e '/^\#\#/d' $< | $(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) | $(CPP_SED_MAGIC) > $@
+	$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $< | $(CPP_SED_MAGIC) > $@
 
 locale.alias: locale.alias.pre
 	$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/locale.alias.pre | $(CPP_SED_MAGIC) > locale.alias.l1
@@ -675,6 +766,7 @@ locale.dir: locale.dir.pre
 	sed -e '/^[^#][^        ]*:/s/://' -e '/^[^#].*[        ].*:/d' \
         < locale.dir.l1 > locale.dir.l2
 	cat locale.dir.l2 locale.dir.l1 > locale.dir
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT: