svn merge ^/branches/released .

3 files changed, 670 insertions, 1141 deletions

diff --git a/libXaw/man/Makefile.am b/libXaw/man/Makefile.am
index cf75d58f8..e6cb8d702 100644
--- a/libXaw/man/Makefile.am
+++ b/libXaw/man/Makefile.am
@@ -1,49 +1,41 @@
-#
-# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
-# 
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation.
-# 
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-# IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-# OTHER DEALINGS IN THE SOFTWARE.
-# 
-# Except as contained in this notice, the name of the copyright holders shall
-# not be used in advertising or otherwise to promote the sale, use or
-# other dealings in this Software without prior written authorization
-# from the copyright holders.
-# 
-
-libmandir = $(LIB_MAN_DIR)
-
-libman_PRE = Xaw.man
-
-libman_DATA = $(libman_PRE:man=@LIB_MAN_SUFFIX@)
-
-EXTRA_DIST = $(libman_PRE)
-
-CLEANFILES = $(libman_DATA)
-
-SED = sed
-
-# Strings to replace in man pages
-XORGRELSTRING = @PACKAGE_STRING@
-  XORGMANNAME = X Version 11
-
-MAN_SUBSTS = -e 's/__vendorversion__/"$(XORGRELSTRING)" "$(XORGMANNAME)"/'
-
-SUFFIXES = .$(LIB_MAN_SUFFIX) .man
-
-.man.$(LIB_MAN_SUFFIX):
-	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
-
+#

+# Copyright (c) 2005, Oracle and/or its affiliates. All rights reserved.

+#

+# Permission is hereby granted, free of charge, to any person obtaining a

+# copy of this software and associated documentation files (the "Software"),

+# to deal in the Software without restriction, including without limitation

+# the rights to use, copy, modify, merge, publish, distribute, sublicense,

+# and/or sell copies of the Software, and to permit persons to whom the

+# Software is furnished to do so, subject to the following conditions:

+#

+# The above copyright notice and this permission notice (including the next

+# paragraph) shall be included in all copies or substantial portions of the

+# Software.

+#

+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

+# DEALINGS IN THE SOFTWARE.

+#

+

+libmandir = $(LIB_MAN_DIR)

+

+libman_PRE = Xaw.man

+

+libman_DATA = $(libman_PRE:man=@LIB_MAN_SUFFIX@)

+

+EXTRA_DIST = $(libman_PRE)

+

+CLEANFILES = $(libman_DATA)

+

+SUFFIXES = .$(LIB_MAN_SUFFIX) .man

+

+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure

+MAN_SUBSTS += -e 's|__docdir__|$(docdir)|g'

+

+.man.$(LIB_MAN_SUFFIX):

+	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@

+

diff --git a/libXaw/man/Makefile.in b/libXaw/man/Makefile.in
deleted file mode 100644
index ad722cdb3..000000000
--- a/libXaw/man/Makefile.in
+++ /dev/null
@@ -1,464 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
-# 
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation.
-# 
-# The above copyright notice and this permission notice shall be included
-# in all copies or substantial portions of the Software.
-# 
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-# IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-# OTHER DEALINGS IN THE SOFTWARE.
-# 
-# Except as contained in this notice, the name of the copyright holders shall
-# not be used in advertising or otherwise to promote the sale, use or
-# other dealings in this Software without prior written authorization
-# from the copyright holders.
-# 
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = man
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_GEN = $(am__v_GEN_$(V))
-am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
-am__v_GEN_0 = @echo "  GEN   " $@;
-AM_V_at = $(am__v_at_$(V))
-am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
-am__v_at_0 = @
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(libmandir)"
-DATA = $(libman_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
-ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-APP_MAN_DIR = @APP_MAN_DIR@
-APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CHANGELOG_CMD = @CHANGELOG_CMD@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CWARNFLAGS = @CWARNFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
-DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
-DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-FILE_MAN_DIR = @FILE_MAN_DIR@
-FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
-GREP = @GREP@
-GROFF = @GROFF@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBEXT = @LIBEXT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIB_MAN_DIR = @LIB_MAN_DIR@
-LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MISC_MAN_DIR = @MISC_MAN_DIR@
-MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
-MKDIR_P = @MKDIR_P@
-NMEDIT = @NMEDIT@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-RANLIB = @RANLIB@
-SED = sed
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-XAW6_CFLAGS = @XAW6_CFLAGS@
-XAW6_LIBS = @XAW6_LIBS@
-XAW7_CFLAGS = @XAW7_CFLAGS@
-XAW7_LIBS = @XAW7_LIBS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-libmandir = $(LIB_MAN_DIR)
-libman_PRE = Xaw.man
-libman_DATA = $(libman_PRE:man=@LIB_MAN_SUFFIX@)
-EXTRA_DIST = $(libman_PRE)
-CLEANFILES = $(libman_DATA)
-
-# Strings to replace in man pages
-XORGRELSTRING = @PACKAGE_STRING@
-XORGMANNAME = X Version 11
-MAN_SUBSTS = -e 's/__vendorversion__/"$(XORGRELSTRING)" "$(XORGMANNAME)"/'
-SUFFIXES = .$(LIB_MAN_SUFFIX) .man
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .$(LIB_MAN_SUFFIX) .man
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu man/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-libmanDATA: $(libman_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(libmandir)" || $(MKDIR_P) "$(DESTDIR)$(libmandir)"
-	@list='$(libman_DATA)'; test -n "$(libmandir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(libmandir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(libmandir)" || exit $$?; \
-	done
-
-uninstall-libmanDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libman_DATA)'; test -n "$(libmandir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(libmandir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(libmandir)" && rm -f $$files
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(libmandir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-libmanDATA
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-libmanDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-libmanDATA install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-libmanDATA
-
-
-.man.$(LIB_MAN_SUFFIX):
-	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/libXaw/man/Xaw.man b/libXaw/man/Xaw.man
index a1425952b..f5458e908 100644
--- a/libXaw/man/Xaw.man
+++ b/libXaw/man/Xaw.man
@@ -1,628 +1,629 @@
-.\"
-.\" Copyright (c) 1999 by The XFree86 Project, Inc.
-.\"
-.\" Permission is hereby granted, free of charge, to any person obtaining a
-.\" copy of this software and associated documentation files (the "Software"),
-.\" to deal in the Software without restriction, including without limitation
-.\" the rights to use, copy, modify, merge, publish, distribute, sublicense,
-.\" and/or sell copies of the Software, and to permit persons to whom the
-.\" Software is furnished to do so, subject to the following conditions:
-.\"
-.\" The above copyright notice and this permission notice shall be included in
-.\" all copies or substantial portions of the Software.
-.\"
-.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
-.\" THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
-.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-.\" SOFTWARE.
-.\"
-.\" Except as contained in this notice, the name of the XFree86 Project shall
-.\" not be used in advertising or otherwise to promote the sale, use or other
-.\" dealings in this Software without prior written authorization from the
-.\" XFree86 Project.
-.\"
-.\" Author: Paulo César Pereira de Andrade
-.\"
-.\" $XFree86: xc/lib/Xaw/Xaw.man,v 1.7 2001/11/04 21:16:39 paulo Exp $
-.\"
-.de EX
-.sp
-.nf
-.ft CW
-..
-.de EE
-.ft R
-.fi
-.sp
-..
-.de TQ
-.\".br
-.ns
-.TP \\$1
-..
-.TH Xaw 3 __vendorversion__
-.SH NAME
- Xaw \- X Athena Widgets
-.SH DESCRIPTION
-.B Xaw
-is a widget set based on the X Toolkit Intrinsics (Xt) Library.  This
-release by the X.org Foundation includes additions and modifications
-originally made for The XFree86 Project, Inc.  This manual page describes
-these changes as well as some of the common interfaces between its version
-and the previous X Consortium release (Xaw6).
-.SH ACTIONS
-All of the \fIXaw\fR widgets now have the additional translations
-.B call-proc, declare, get-values
-and \fBset-values\fP. The syntax for these actions is:
-.PP
-.I action-name \fP(\fIboolean-expression\fP, \fIarguments\fP)
-.PP
-\fBAction-name\fP is one of \fIcall-proc\fP, \fIdeclare\fP,
-\fIget-values\fP or \fIset-values\fP.
-.PP
-\fBBoolean-expression\fP is composed with the operators \fI|\fR (or), \fI&\fR
-(and), \fI^\fR (xor), and \fI~\fR (not). The operands can be a variable name,
-which starts with a \fI$\fR; a resource name without the bindings \fI.\fP
-or \fI*\fP; or a constant name, including \fImine\fP (event->xany.window
-== XtWindow(widget)), \fIfaked\fP (event->xany.send_event != 0), \fItrue\fP (1)
-and \fIfalse\fP (0).
-.PP
-\fBArguments\fP are self-explanatory; when starting with a \fI$\fP they name
-a variable, otherwise, they indicate a resource name.
-.TP 8
-.B call-proc \fP(\fIboolean-expression\fP, \fIprocedure-name\fP)
-This action allows the evaluation of a boolean expression in the first
-parameter before calling a action procedure.  The procedure is only called
-if the expression evaluates as true.  Example:
-.EX
-call-proc("$inside & $pressed", notify)
-.EE
-.TP 8
-.B declare \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)
-This action is used to create new variables or change their values.  Any
-number of variable-value tuples may be specified.  Example:
-.EX
-declare(1, $pressed, 1)
-.EE
-.TP 8
-.B get-values \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)
-This action reads a widget resource value into a variable.  Any number of
-variable-value tuples may be specified.  Example:
-.EX
-get-values(1, $fg, foreground, $bg, background)
-.EE
-.TP 8
-.B set-values \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)
-This action sets a widget resource to the given value, which may be a
-variable.  Any number of variable-value tuples may be specified.  Example:
-.EX
-set-values(1, foreground, $bg, background, $fg)
-.EE
-.PP
-Here is a sample translation to make a label widget behave like a button:
-.PP
-.nf
-<Map>:      get-values(1, $fg, foreground, $bg, background)\en\e
-<Btn1Down>: set-values(1, foreground, yellow, background, gray30)\en\e
-<Btn1Up>:   set-values(1, foreground, $fg, background, $bg)
-.fi
-.SH DISPLAY LISTS
-All of the \fBXaw\fP widgets have now the additional resource
-\fIdisplayList\fP.  This resource allows drawing the widget decorations
-using commands embedded in a resource string.  The displayList resource has
-the syntax:
-.PP
-\fI[class-name:]function-name arguments[[{;\en}]...]\fP
-.PP
-\fBClass-name\fP is any registered set of functions to draw in the widget.
-Currently the only existing class is \fIxlib\fP, which provides access to
-the Xlib drawing primitives.
-.PP
-\fBFunction-name\fP is the drawing or configuration function to be called,
-described bellow.
-.PP
-\fBArguments\fP may be anything suitable to the displayList function being
-called. When the function requires a coordinate, the syntax is
-\fI{+-}<integer>\fP or \fI<integer>/<integer>\fP. Examples:
-.nf
-	+0,+0      top, left
-	-0,-0      bottom, right
-	-+10,-+10  bottom+10, right+10
-	+0,1/2     left, vertical-center
-.fi
-.TP 8
-.B arc-mode \fPmode
-Sets the arc mode.  Accepted \fImode\fPs are "pieslice" and "chord", which
-set the arc to ArcPieSlice or ArcChord, respectively.  Example:
-.EX
-arc-mode chord
-.EE
-.TP 8
-.B bg \fPcolor-spec
-.TQ
-.B background \fPcolor-spec
-Sets the  background color.  \fIcolor-spec\fP must a valid color
-specification.  Example:
-.EX
-background red
-.EE
-.TP 8
-.B cap-style \fPstyle
-Sets the cap style.  Accepted \fIstyle\fPs are "notlast", "butt", "round",
-and "projecting", which set the cap style to CapNotLast, CapBut, CapRound
-or CapProjecting, respectively.  Example:
-.EX
-cap-style round
-.EE
-.TP 8
-.B clip-mask \fPpixmap-spec
-Sets the pixmap for the clip mask.  Requires a pixmap parameter, as
-described in the \fBPIXMAPS\fP section below.  Example:
-.EX
-clip-mask xlogo11
-.EE
-.TP 8
-.B clip-origin \fPx,y
-Sets the clip x and y origin.  Requires two arguments, the x and y
-coordinates.  Example:
-.EX
-clip-origin 10,10
-.EE
-.TP 8
-.B clip-rects \fPx1,y1,x2,y2 [...,xn,yn]
-.TQ
-.B clip-rectangles \fPx1,y1,x2,y2 [...,xn,yn]
-Sets a list of rectangles to the clip mask.  The number of arguments must
-be a multiple of four.  The arguments are coordinates.  The parser
-calculates the width and height of the rectangles.  Example:
-.EX
-clip-rects 0,0,10,20, 20,10,30,30
-.EE
-.TP 8
-.B coord-mode \fPmode
-Changes the coord mode for \fIfill-polygon\fP, \fIdraw-lines\fP, and
-\fIdraw-points\fP.  Accepted parameters are "modeorigin" and "previous",
-that sets the coord mode to CoordModeOrigin or CoordModePrevious,
-respectively.  Example:
-.EX
-coord-mode previous
-.EE
-.TP 8
-.B copy-area \fP{pixmap-spec|.},dstx,dsty[,x2,y2,srcx,srcy]
-Calls XCopyArea.  The character \fI.\fP means copy the window contents;
-pixmap-spec is as defined in the \fBPIXMAPS\fP section below.  \fIX2\fP and
-\fIy2\fP are the coordinates of the end copy, not the width and height; if
-not defined, the parser calculates them. \fIsrc_x\fP and \fIsrc_y\fP
-default to zero.  Example:
-.EX
-copy-area Term,10,10
-.EE
-.TP 8
-.B copy-plane \fP{pixmap-spec|.},dstx,dsty[,x2,y2,srcx,srcy,plane]
-Calls XCopyPlane. The character \fI.\fP means copy the window contents;
-pixmap-spec is as defined in the \fBPIXMAPS\fP section below.  \fIX2\fP and
-\fIy2\fP are the coordinates of the end copy, not the width and height; if
-not defined, the parser calculates them.  \fIsrc_x\fP and \fIsrc_y\fP
-default to zero. \fIPlane\fP defaults to one.  Example:
-.EX
-copy-plane star,10,10
-.EE
-.TP 8
-.B dashes \fPi1[...,in]
-Sets the dashes for line drawing.  Accepts up to 127 arguments.  Example:
-.EX
-dashes 3,7 9,10
-.EE
-.TP 8
-.B draw-arc \fPx1,y1,x2,y2[,start-angle,end-angle]
-Draws an arc.  The four first arguments are the rectangle enclosing the
-arc.  The two remaining arguments, if specified, are the start and end
-angle, in degrees.  Example:
-.EX
-draw-arc +0,+0,-1,-1,0,90
-.EE
-.TP 8
-.B draw-rect \fPx1,y1,x2,y2
-.TQ
-.B draw-rectangle \fPx1,y1,x2,y2
-Draws a rectangle.  Requires four arguments, which are the start and end
-coordinate pairs.  Example:
-.EX
-draw-rect +1,+1,-5,-5
-.EE
-.TP 8
-.B draw-string \fPx,y,"string"
-Draws a text string.  Requires three arguments, a x coordinate, a y
-coordinate, and a string.  Strings that have white space can be quoted with
-the \fI"\fP character; the backslash character \fI\e\fP can also be used,
-but it will be necessary escape it twice.  Example:
-.EX
- draw-string 10,10, "Hello world!"\fP
-.EE
-.TP 8
-.B exposures \fPboolean
-Sets graphics exposures in the GC.  Allowed parameters are a integer or the
-strings "true", "false", "on" and "off".  Example:
-.EX
-exposures true
-.EE
-.TP 8
-.B fill-arc \fPx1,y1,x2,y2[,start-angle,end-angle]
-Like \fIdraw-arc\fP, but fills the contents of the arc with the currently
-selected foreground.  Example:
-.EX
-fill-arc +0,+0,-1,-1,0,180
-.EE
-.TP 8
-.B fill-poly \fPx1,y1 [...,xn,yn]
-.TQ
-.B fill-polygon \fPx1,y1 [...,xn,yn]
-Like \fIdraw-lines\fP, but fills the enclosed polygon and joins the first
-and last point, if they are not at the same position.  Example:
-.EX
-fill-poly +0,+10, +10,+20, +30,+0
-.EE
-.TP
-.B fill-rect \fPx1,y1,x2,y2
-.TQ
-.B fill-rectangle \fPx1,y1,x2,y2
-Like \fIdraw-rect\fP, but fills the contents of the rectangle with the
-selected foreground color.  Example:
-.EX
-fill-rect +10,+10,-20,-20
-.EE
-.TP 8
-.B fill-rule \fPrule
-Sets the fill rule.  Accepted parameters are "evenodd" and "winding", which
-set the fill rule to EvenOddRule or WindingRule, respectively.  Example:
-.EX
-fill-rule winding
-.EE
-.TP 8
-.B fill-style \fPstyle
-Sets the fill style.  Allowed parameters are "solid", "tiled", "stippled" and
-"opaquestippled", which set the fill style to FillSolid, FillTiled,
-FillStippled or FillOpaqueStippled, respectively.  Example:
-.EX
-fill-style tiled
-.EE
-.TP 8
-.B font \fPfont-spec
-Sets the font for text functions.  Example:
-.EX
-font -*-*-*-R-*-*-*-120-*-*-*-*-ISO8859-1
-.EE
-.TP 8
-.B fg \fPcolor-spec
-.TQ
-.B foreground \fPcolor-spec
-Like \fIbackground\fP, but sets the current foreground color.  Example:
-.EX
-foreground blue
-.EE
-.TP 8
-.B mask
-This command is useful when you want to draw only in the region that really
-needs to be repainted.  Requires no arguments.
-.TP 8
-.B function \fPfunction-spec
-Sets the specific GC function.  Allowed parameters are "set", "clear", "and",
-"andreverse", "copy", "andinverted", "noop", "xor", "or", "nor", "equiv",
-"invert", "orreverse", "copyinverted" and "nand", which set the function to
-GXset, GXclear, GXand, GXandReverse, GXcopy, GXandInverted, GXnoop, GXxor,
-GXor, GXnor, GXequiv, GXinvert, GXorReverse, GXcopyInverted or GXnand,
-respectively.  Example:
-.EX
-function xor
-.EE
-.TP 8
-.B join-style \fPstyle
-Sets the join style.  Allowed parameters are "miter", "round" and "bevel",
-which set the join style to JoinMiter, JoinRound and JoinBevel,
-respectively.  Example:
-.EX
-join-style round
-.EE
-.TP 8
-.B image \fP{pixmap-spec},xs,ys,[xe,ye]
-This function is implemented as a way to quickly compose complex
-decorations in widgets.  \fIPixmap-spec\fP is as defined in the
-\fBPIXMAPS\fP section below. \fIxs\fP and \fIys\fP are the coordinates from
-where to start copying the pixmap; \fIxe\fP and \fIye\fP are optional (they
-default to xs + pixmap.width and ys + pixmap.height, respectively).  If the
-pixmap has a mask, the copy is masked accordingly.  Example:
-.EX
-image pixmap.xpm,0,0,20,20
-.EE
-.TP 8
-.B line \fPx1,y1,x2,y2
-.TQ
-.B draw-line \fPx1,y1,x2,y2
-Draws a line with the current foreground color.  Requires four arguments,
-the starting and ending coordinate pairs.  Example:
-.EX
-line +0,+0, -1,-1
-.EE
-.TP 8
-.B line-width \fPinteger
-Selects a line width for drawing.  Example:
-.EX
-line-width 2
-.EE
-.TP 8
-.B line-style \fPstyle
-Sets the line style.  Accepted parameters are "solid", "onoffdash" and
-"doubledash", which set the line style to LineSolid, LineOnOffDash or
-LineDoubleDash, respectively.  Example:
-.EX
-line-style onoffdash
-.EE
-.TP 8
-.B lines \fPx1,y1,x2,y2 [...,xn,yn]
-.TQ
-.B draw-lines \fPx1,y1,x2,y2 [...,xn,yn]
-Draws a list of lines. Any number of argument pairs may be supplied.
-Example:
-.EX
-lines +0,-1, -1,-1, -1,+0
-.EE
-.TP 8
-.B paint-string \fPx,y,"string"
-Identical to draw-string, but also uses the background color.  Example:
-.EX
- paint-string 10,20, "Sample text"\fP
-.EE
-.TP 8
-.B point \fPx,y
-.TQ
-.B draw-point \fPx,y
-Draws a point.  Requires two arguments, a coordinate pair.  Example:
-.EX
-point +10,+10
-.EE
-.TP 8
-.B plane-mask \fPinteger
-Sets the plane mask.  Requires an integer parameter.  Example:
-.EX
-plane-mask -1
-.EE
-.TP 8
-.B points \fPx1,y1 [...,xn,yn]
-.TQ
-.B draw-points \fPx1,y1 [...,xn,yn]
-Draws a list of points at the specified coordinates.  Example:
-.EX
-points +1,+2, +1,+4, +1,+6
-.EE
-.TP 8
-.B segments \fPx1,y1,x2,y2 [...,xn,yn]
-.TQ
-.B draw-segments \fPx1,y1,x2,y2 [...,xn,yn]
-Draws a list of segment lines.  The number of parameters must be multiple
-of 4.  Example:
-.EX
-segments +1,+2,+1,-3, +2,-2,-3,-2
-.EE
-.TP 8
-.B shape-mode \fPmode
-Sets the shape mode used in \fIfill-polygon\fP.  Accepted parameters are
-"complex", "convex" or "nonconvex", which set the shape mode to Complex,
-Convex or Nonconvex, accordingly.  Example:
-.EX
-shape-mode convex
-.EE
-.TP 8
-.B stipple \fPpixmap-spec
-Sets the pixmap for a stipple.  Requires a pixmap parameter, as described
-in the \fBPIXMAPS\fP section below.  Example:
-.EX
-stipple plaid
-.EE
-.TP 8
-.B subwindow-mode \fPmode
-Sets the subwindow mode in the GC.  Accepted parameters are
-"includeinferiors" and "clipbychildren", which set the subwindow mode to
-IncludeInferiors or ClipByChildren, respectively.  Example:
-.EX
-subwindow-mode includeinferiors
-.EE
-.TP 8
-.B tile \fPpixmap-spec
-Sets the pixmap for a tile.  Requires a pixmap parameter, as described
-in the \fBPIXMAPS\fP section below.  Example:
-.EX
-tile xlogo11?foreground=red&background=gray80
-.EE
-.TP 8
-.B ts-origin \fPx,y
-Sets the tile stipple x and y origin.  Requires two arguments, a x and y
-coordinate.  Example:
-.EX
-ts-origin 10,10
-.EE
-.TP 8
-.B umask
-Disables the GC mask, if it has been set with the command \fImask\fP.
-Requires no arguments.
-.PP
-Example for drawing a shadow effect in a widget:
-.EX
-foreground gray30;\e
-draw-lines +1,-1,-1,-1,-1,+1;\e
-foreground gray85;\e
-draw-lines -1,+0,+0,+0,+0,-1
-.EE
-.SH PIXMAPS
-A String to Pixmap converter has been  added to \fBXaw\fP.  This converter
-is meant to be extended, and has enough abstraction to allow loading
-several image formats.  It uses a format that resembles a \fIURL\fP, with
-the syntax:
-.PP
-.I [type:]name[?arg=val[{&}...]]
-.PP
-\fBType\fP can be one of \fIbitmap\fP, \fIgradient\fP or \fIxpm\fP.
-.PP
-\fBName\fP may be a file name, or, in the case of type \fIgradient\fP, may be
-either \fIvertical\fP or \fIhorizontal\fP.
-.PP
-\fBArg=val\fP is a list of arguments to the converter.  An argument list is
-preceded by a question mark, and multiple arguments are separated by
-ampersands.  The most common arguments are \fIforeground\fP and
-\fIbackground\fP.  Gradients also support the arguments \fIstart\fP and
-\fIend\fP (colors with which to start and end the gradient); the
-\fPsteps\fP argument, to allow using less colors; and the \fIdimension\fP
-argument to specify the size of the gradient.	The \fIxpm\fP converter
-understands the \fIcloseness\fP argument, which aids in using fewer colors
-(useful if you have a limited colormap).
-.SH TEXT WIDGET
-Most of the changes to this version of the Xaw library were done in the
-TextWidget, TextSrcObject, TextSinkObject and related files.
-.PP
-A couple of highly visible changes in the Text widget are due to many bugs
-in the Xaw6 implementation involving scrollbars and auto-resizing.
-Scrollbars being added or removed caused several problems in keeping the
-text cursor visible, and in Xaw6 it was very easy to have a widget thinking
-the cursor was visible, when it was not.  Also, permitting automatic
-resizing of the widget to a larger geometry created other problems, making
-it difficult to have a consistent layout in the application, and, if the
-window manager did not interfere, windows larger than the screen could
-result.  Therefore, some functionality involving scrollbars and
-auto-resizing has been disabled; see the section on new and modified
-Text widget resources below.
-.PP
-The Text widget's default key bindings were originally based on the Emacs
-text editor.  In this release, even more operations familiar to Emacs users
-have been added.  New text actions include:
-.TP 8
-.B indent
-Indents text blocks.  Not bound by default.  The Text widget also does not
-attempt to perform auto-indentation of its source object by default.
-.TP 8
-.B keyboard-reset
-Resets the keyboard state.  Reverts the action multiplier to 1, and if undo
-is enabled, toggles between undo and redo.  Bound by default to
-\fIControl<Key>G\fP.
-.TP 8
-.B kill-ring-yank
-In this version of Xaw, text killed in any text field is kept in memory,
-allowing cut and paste operations internally to the program between text
-fields.  Bound by default to \fIMeta<Key>Y\fP.
-.TP 8
-.B numeric
-Listed here only for purposes of documentation.  Called by default when one
-of the characters \fI1, 2, 3, 4, 5, 6, 7, 8, 9, 0,\fP or \fI-\fP is typed,
-allowing composition of the multiplication number of text actions.
-.TP 8
-.B set-keyboard-focus
-Sets the input focus of the top level widget to the text field.  Not
-enabled by default, but bound to the \fI<Btn1Down>\fP event.
-.TP 8
-.B toggle-overwrite
-Toggles overwrite mode.  In overwrite mode, any text inserted in a text
-field will replace existing text.  Bound by default to \fI<Key>Insert\fP.
-.TP 8
-.B undo
-Sets the \fIenableUndo\fP resource of the textSrcObject.  Not enabled by
-default, but bound to \fIControl<Key>_\fP.
-.PP
-New and modified Text widget resources include:
-.TP 8
-.B justify (\fPClass\fB Justify)
-Sets the text justification.  Can be one of \fIleft, right, center\fP, or
-\fIfull\fP.  Only enabled when the \fIautoFill\fP resource is set, and the
-resources \fIleftColumn\fP and \fIrightColumn\fP are correctly set.
-.TP 8
-.B leftColumn (\fPClass\fB Column)
-Specifies the left column at which to break text.  Text lines started with
-an alphanumeric character will automatically start at this column.
-.TP 8
-.B positionCallback (\fPClass\fB Callback)
-Allows installation of a callback to be called every time the cursor is
-moved, and/or the file changes its size.  The callback is called with a
-pointer to a structure containing the following data:
-.nf
-typedef struct {
-    int line_number;
-    int column_number;
-    XawTextPosition insert_position;
-    XawTextPosition last_position;
-    Boolean overwrite_mode;
-} XawTextPositionInfo;
-.fi
-This callback is intended to help programmers write text editors based
-on the Xaw widget set.
-.TP 8
-.B resize (\fPClass\fB Resize)
-No longer supported, but recognized for backward compatibility with
-resource specifications written for the Xaw6 Text widget.
-.TP 8
-.B rightColumn (\fPClass\fB Column)
-Specifies the right column at which to break text.  Text lines started with
-an alphanumeric character will automatically end at this column.
-.TP 8
-.B scrollHorizontal (\fPClass\fB Scroll)
-.TQ
-.B scrollVertical (\fPClass\fB Scroll)
-These resources control the placement of scrollbars on the left and bottom
-edges of the Text widget.  They accept the values \fIXawtextScrollAlways\fP
-and \fIXawtextScrollNever\fP.  A converter is registered for this resource
-that will convert the following strings: \fIalways\fP and \fInever\fP.  The
-value \fIXawtextScrollWhenNeeded\fP (and \fIwhenNeeded\fP, recognized by
-the converter), is accepted for backwards compatibility with resource
-specifications written for the Xaw6 Text widget, but ignored (effectively
-treated as \fIXawtextScrollNever\fP).
-.SH TEXT SOURCE OBJECT
-The textSrcObject allows display of its contents to more than one window,
-and also stores undo information. The new resources for the textSrcObject
-are:
-.TP 8
-.B callback (\fPClass\fB Callback)
-Previous versions of Xaw had this resource in subclasses of the TextSource
-object.  This was changed to make it possible to tell the callback the
-state of the text when undo is enabled.
-.TP 8
-.B enableUndo (\fPClass\fB Undo)
-A boolean resource that enables or disables the undo function.  The default
-value is False.
-.TP 8
-.B sourceChanged (\fPClass\fB Changed)
-Like the callback resource, this resource was previously in subclasses of
-the TextSource object.  It is now in the textSrcObject to control the
-changed/unchanged state when undo is enabled.
-.SH TEXT SINK OBJECT
-The textSinkObject subclasses asciiSinkObject and multiSinkObject have been
-changed slightly to use a new cursor shape (no longer a caret at the
-baseline) that indicates the input focus of the text widget, and allow
-specification of the cursor color.  The new resource is:
-.TP 8
-.B cursorColor (\fPClass\fB Color)
-Sets the cursor color of the text.  This color is also used to draw
-selected text.
-.SH SIMPLE MENU WIDGET
-The simpleMenuWidget algorithm to lay out menu entries has been changed to
-enable multiple columns when a single column does not fit on the screen.
-It was also modified to enable submenus.
-.SH SME BSB OBJECT
-A new resource has been added to the smeBSBObject to allow binding submenus
-to it.  The new resource is:
-.TP 8
-.B menuName (\fPClass\fB MenuName)
-Specifies the name of the popup widget to be popped up when the pointer is
-over the menu entry, or NULL.  Note that the named menu must be a child of
-the popup parent of the smeBSBObject.
-.SH AUTHORS
-The original X Consortium version of the Athena Widget Set and its
-documentation were the work of many people, including Chris D. Peterson,
-Ralph Swick, Mark Ackerman, Donna Converse, Jim Fulton, Loretta
-Guarino-Reid, Charles Haynes, Rich Hyde, Mary Larson, Joel McCormack, Ron
-Newman, Jeanne Rich, Terry Weissman, Mike Gancarz, Phil Karlton, Kathleen
-Langone, Ram Rao, Smokey Wallace, Al Mento, and Jean Diaz.
-.PP
-The additions and modifications to \fIXaw\fR which were
-originally made for XFree86 were written by Paulo
-C\('esar Pereira de Andrade.
-.SH SEE ALSO
-.I Athena Widget Set - C Language Interface
+.\"

+.\" Copyright (c) 1999 by The XFree86 Project, Inc.

+.\"

+.\" Permission is hereby granted, free of charge, to any person obtaining a

+.\" copy of this software and associated documentation files (the "Software"),

+.\" to deal in the Software without restriction, including without limitation

+.\" the rights to use, copy, modify, merge, publish, distribute, sublicense,

+.\" and/or sell copies of the Software, and to permit persons to whom the

+.\" Software is furnished to do so, subject to the following conditions:

+.\"

+.\" The above copyright notice and this permission notice shall be included in

+.\" all copies or substantial portions of the Software.

+.\"

+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

+.\" IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+.\" FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

+.\" THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

+.\" WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF

+.\" OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

+.\" SOFTWARE.

+.\"

+.\" Except as contained in this notice, the name of the XFree86 Project shall

+.\" not be used in advertising or otherwise to promote the sale, use or other

+.\" dealings in this Software without prior written authorization from the

+.\" XFree86 Project.

+.\"

+.\" Author: Paulo César Pereira de Andrade

+.\"

+.de EX

+.sp

+.nf

+.ft CW

+..

+.de EE

+.ft R

+.fi

+.sp

+..

+.de TQ

+.\".br

+.ns

+.TP \\$1

+..

+.TH Xaw 3 __vendorversion__

+.SH NAME

+ Xaw \- X Athena Widgets

+.SH DESCRIPTION

+.B Xaw

+is a widget set based on the X Toolkit Intrinsics (Xt) Library.  This

+release by the X.Org Foundation includes additions and modifications

+originally made for The XFree86 Project, Inc.  This manual page describes

+these changes as well as some of the common interfaces between its version

+and the previous X Consortium release (Xaw6).

+.PP

+The bulk of the Xaw documentation is located in the API specification

+which may be installed in __docdir__, or found on the X.Org website.

+.SH ACTIONS

+All of the \fIXaw\fR widgets now have the additional translations

+.B call-proc, declare, get-values

+and \fBset-values\fP. The syntax for these actions is:

+.PP

+.I action-name \fP(\fIboolean-expression\fP, \fIarguments\fP)

+.PP

+\fBAction-name\fP is one of \fIcall-proc\fP, \fIdeclare\fP,

+\fIget-values\fP or \fIset-values\fP.

+.PP

+\fBBoolean-expression\fP is composed with the operators \fI|\fR (or), \fI&\fR

+(and), \fI^\fR (xor), and \fI~\fR (not). The operands can be a variable name,

+which starts with a \fI$\fR; a resource name without the bindings \fI.\fP

+or \fI*\fP; or a constant name, including \fImine\fP (event->xany.window

+== XtWindow(widget)), \fIfaked\fP (event->xany.send_event != 0), \fItrue\fP (1)

+and \fIfalse\fP (0).

+.PP

+\fBArguments\fP are self-explanatory; when starting with a \fI$\fP they name

+a variable, otherwise, they indicate a resource name.

+.TP 8

+.B call-proc \fP(\fIboolean-expression\fP, \fIprocedure-name\fP)

+This action allows the evaluation of a boolean expression in the first

+parameter before calling a action procedure.  The procedure is only called

+if the expression evaluates as true.  Example:

+.EX

+call-proc("$inside & $pressed", notify)

+.EE

+.TP 8

+.B declare \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)

+This action is used to create new variables or change their values.  Any

+number of variable-value tuples may be specified.  Example:

+.EX

+declare(1, $pressed, 1)

+.EE

+.TP 8

+.B get-values \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)

+This action reads a widget resource value into a variable.  Any number of

+variable-value tuples may be specified.  Example:

+.EX

+get-values(1, $fg, foreground, $bg, background)

+.EE

+.TP 8

+.B set-values \fP(\fIboolean-expression\fP, \fIvariable\fP, \fIvalue\fP, ...)

+This action sets a widget resource to the given value, which may be a

+variable.  Any number of variable-value tuples may be specified.  Example:

+.EX

+set-values(1, foreground, $bg, background, $fg)

+.EE

+.PP

+Here is a sample translation to make a label widget behave like a button:

+.PP

+.nf

+<Map>:      get-values(1, $fg, foreground, $bg, background)\en\e

+<Btn1Down>: set-values(1, foreground, yellow, background, gray30)\en\e

+<Btn1Up>:   set-values(1, foreground, $fg, background, $bg)

+.fi

+.SH DISPLAY LISTS

+All of the \fBXaw\fP widgets have now the additional resource

+\fIdisplayList\fP.  This resource allows drawing the widget decorations

+using commands embedded in a resource string.  The displayList resource has

+the syntax:

+.PP

+\fI[class-name:]function-name arguments[[{;\en}]...]\fP

+.PP

+\fBClass-name\fP is any registered set of functions to draw in the widget.

+Currently the only existing class is \fIxlib\fP, which provides access to

+the Xlib drawing primitives.

+.PP

+\fBFunction-name\fP is the drawing or configuration function to be called,

+described bellow.

+.PP

+\fBArguments\fP may be anything suitable to the displayList function being

+called. When the function requires a coordinate, the syntax is

+\fI{+-}<integer>\fP or \fI<integer>/<integer>\fP. Examples:

+.nf

+	+0,+0      top, left

+	-0,-0      bottom, right

+	-+10,-+10  bottom+10, right+10

+	+0,1/2     left, vertical-center

+.fi

+.TP 8

+.B arc-mode \fPmode

+Sets the arc mode.  Accepted \fImode\fPs are "pieslice" and "chord", which

+set the arc to ArcPieSlice or ArcChord, respectively.  Example:

+.EX

+arc-mode chord

+.EE

+.TP 8

+.B bg \fPcolor-spec

+.TQ

+.B background \fPcolor-spec

+Sets the  background color.  \fIcolor-spec\fP must a valid color

+specification.  Example:

+.EX

+background red

+.EE

+.TP 8

+.B cap-style \fPstyle

+Sets the cap style.  Accepted \fIstyle\fPs are "notlast", "butt", "round",

+and "projecting", which set the cap style to CapNotLast, CapBut, CapRound

+or CapProjecting, respectively.  Example:

+.EX

+cap-style round

+.EE

+.TP 8

+.B clip-mask \fPpixmap-spec

+Sets the pixmap for the clip mask.  Requires a pixmap parameter, as

+described in the \fBPIXMAPS\fP section below.  Example:

+.EX

+clip-mask xlogo11

+.EE

+.TP 8

+.B clip-origin \fPx,y

+Sets the clip x and y origin.  Requires two arguments, the x and y

+coordinates.  Example:

+.EX

+clip-origin 10,10

+.EE

+.TP 8

+.B clip-rects \fPx1,y1,x2,y2 [...,xn,yn]

+.TQ

+.B clip-rectangles \fPx1,y1,x2,y2 [...,xn,yn]

+Sets a list of rectangles to the clip mask.  The number of arguments must

+be a multiple of four.  The arguments are coordinates.  The parser

+calculates the width and height of the rectangles.  Example:

+.EX

+clip-rects 0,0,10,20, 20,10,30,30

+.EE

+.TP 8

+.B coord-mode \fPmode

+Changes the coord mode for \fIfill-polygon\fP, \fIdraw-lines\fP, and

+\fIdraw-points\fP.  Accepted parameters are "modeorigin" and "previous",

+that sets the coord mode to CoordModeOrigin or CoordModePrevious,

+respectively.  Example:

+.EX

+coord-mode previous

+.EE

+.TP 8

+.B copy-area \fP{pixmap-spec|.},dstx,dsty[,x2,y2,srcx,srcy]

+Calls XCopyArea.  The character \fI.\fP means copy the window contents;

+pixmap-spec is as defined in the \fBPIXMAPS\fP section below.  \fIX2\fP and

+\fIy2\fP are the coordinates of the end copy, not the width and height; if

+not defined, the parser calculates them. \fIsrc_x\fP and \fIsrc_y\fP

+default to zero.  Example:

+.EX

+copy-area Term,10,10

+.EE

+.TP 8

+.B copy-plane \fP{pixmap-spec|.},dstx,dsty[,x2,y2,srcx,srcy,plane]

+Calls XCopyPlane. The character \fI.\fP means copy the window contents;

+pixmap-spec is as defined in the \fBPIXMAPS\fP section below.  \fIX2\fP and

+\fIy2\fP are the coordinates of the end copy, not the width and height; if

+not defined, the parser calculates them.  \fIsrc_x\fP and \fIsrc_y\fP

+default to zero. \fIPlane\fP defaults to one.  Example:

+.EX

+copy-plane star,10,10

+.EE

+.TP 8

+.B dashes \fPi1[...,in]

+Sets the dashes for line drawing.  Accepts up to 127 arguments.  Example:

+.EX

+dashes 3,7 9,10

+.EE

+.TP 8

+.B draw-arc \fPx1,y1,x2,y2[,start-angle,end-angle]

+Draws an arc.  The four first arguments are the rectangle enclosing the

+arc.  The two remaining arguments, if specified, are the start and end

+angle, in degrees.  Example:

+.EX

+draw-arc +0,+0,-1,-1,0,90

+.EE

+.TP 8

+.B draw-rect \fPx1,y1,x2,y2

+.TQ

+.B draw-rectangle \fPx1,y1,x2,y2

+Draws a rectangle.  Requires four arguments, which are the start and end

+coordinate pairs.  Example:

+.EX

+draw-rect +1,+1,-5,-5

+.EE

+.TP 8

+.B draw-string \fPx,y,"string"

+Draws a text string.  Requires three arguments, a x coordinate, a y

+coordinate, and a string.  Strings that have white space can be quoted with

+the \fI"\fP character; the backslash character \fI\e\fP can also be used,

+but it will be necessary escape it twice.  Example:

+.EX

+ draw-string 10,10, "Hello world!"\fP

+.EE

+.TP 8

+.B exposures \fPboolean

+Sets graphics exposures in the GC.  Allowed parameters are a integer or the

+strings "true", "false", "on" and "off".  Example:

+.EX

+exposures true

+.EE

+.TP 8

+.B fill-arc \fPx1,y1,x2,y2[,start-angle,end-angle]

+Like \fIdraw-arc\fP, but fills the contents of the arc with the currently

+selected foreground.  Example:

+.EX

+fill-arc +0,+0,-1,-1,0,180

+.EE

+.TP 8

+.B fill-poly \fPx1,y1 [...,xn,yn]

+.TQ

+.B fill-polygon \fPx1,y1 [...,xn,yn]

+Like \fIdraw-lines\fP, but fills the enclosed polygon and joins the first

+and last point, if they are not at the same position.  Example:

+.EX

+fill-poly +0,+10, +10,+20, +30,+0

+.EE

+.TP

+.B fill-rect \fPx1,y1,x2,y2

+.TQ

+.B fill-rectangle \fPx1,y1,x2,y2

+Like \fIdraw-rect\fP, but fills the contents of the rectangle with the

+selected foreground color.  Example:

+.EX

+fill-rect +10,+10,-20,-20

+.EE

+.TP 8

+.B fill-rule \fPrule

+Sets the fill rule.  Accepted parameters are "evenodd" and "winding", which

+set the fill rule to EvenOddRule or WindingRule, respectively.  Example:

+.EX

+fill-rule winding

+.EE

+.TP 8

+.B fill-style \fPstyle

+Sets the fill style.  Allowed parameters are "solid", "tiled", "stippled" and

+"opaquestippled", which set the fill style to FillSolid, FillTiled,

+FillStippled or FillOpaqueStippled, respectively.  Example:

+.EX

+fill-style tiled

+.EE

+.TP 8

+.B font \fPfont-spec

+Sets the font for text functions.  Example:

+.EX

+font -*-*-*-R-*-*-*-120-*-*-*-*-ISO8859-1

+.EE

+.TP 8

+.B fg \fPcolor-spec

+.TQ

+.B foreground \fPcolor-spec

+Like \fIbackground\fP, but sets the current foreground color.  Example:

+.EX

+foreground blue

+.EE

+.TP 8

+.B mask

+This command is useful when you want to draw only in the region that really

+needs to be repainted.  Requires no arguments.

+.TP 8

+.B function \fPfunction-spec

+Sets the specific GC function.  Allowed parameters are "set", "clear", "and",

+"andreverse", "copy", "andinverted", "noop", "xor", "or", "nor", "equiv",

+"invert", "orreverse", "copyinverted" and "nand", which set the function to

+GXset, GXclear, GXand, GXandReverse, GXcopy, GXandInverted, GXnoop, GXxor,

+GXor, GXnor, GXequiv, GXinvert, GXorReverse, GXcopyInverted or GXnand,

+respectively.  Example:

+.EX

+function xor

+.EE

+.TP 8

+.B join-style \fPstyle

+Sets the join style.  Allowed parameters are "miter", "round" and "bevel",

+which set the join style to JoinMiter, JoinRound and JoinBevel,

+respectively.  Example:

+.EX

+join-style round

+.EE

+.TP 8

+.B image \fP{pixmap-spec},xs,ys,[xe,ye]

+This function is implemented as a way to quickly compose complex

+decorations in widgets.  \fIPixmap-spec\fP is as defined in the

+\fBPIXMAPS\fP section below. \fIxs\fP and \fIys\fP are the coordinates from

+where to start copying the pixmap; \fIxe\fP and \fIye\fP are optional (they

+default to xs + pixmap.width and ys + pixmap.height, respectively).  If the

+pixmap has a mask, the copy is masked accordingly.  Example:

+.EX

+image pixmap.xpm,0,0,20,20

+.EE

+.TP 8

+.B line \fPx1,y1,x2,y2

+.TQ

+.B draw-line \fPx1,y1,x2,y2

+Draws a line with the current foreground color.  Requires four arguments,

+the starting and ending coordinate pairs.  Example:

+.EX

+line +0,+0, -1,-1

+.EE

+.TP 8

+.B line-width \fPinteger

+Selects a line width for drawing.  Example:

+.EX

+line-width 2

+.EE

+.TP 8

+.B line-style \fPstyle

+Sets the line style.  Accepted parameters are "solid", "onoffdash" and

+"doubledash", which set the line style to LineSolid, LineOnOffDash or

+LineDoubleDash, respectively.  Example:

+.EX

+line-style onoffdash

+.EE

+.TP 8

+.B lines \fPx1,y1,x2,y2 [...,xn,yn]

+.TQ

+.B draw-lines \fPx1,y1,x2,y2 [...,xn,yn]

+Draws a list of lines. Any number of argument pairs may be supplied.

+Example:

+.EX

+lines +0,-1, -1,-1, -1,+0

+.EE

+.TP 8

+.B paint-string \fPx,y,"string"

+Identical to draw-string, but also uses the background color.  Example:

+.EX

+ paint-string 10,20, "Sample text"\fP

+.EE

+.TP 8

+.B point \fPx,y

+.TQ

+.B draw-point \fPx,y

+Draws a point.  Requires two arguments, a coordinate pair.  Example:

+.EX

+point +10,+10

+.EE

+.TP 8

+.B plane-mask \fPinteger

+Sets the plane mask.  Requires an integer parameter.  Example:

+.EX

+plane-mask -1

+.EE

+.TP 8

+.B points \fPx1,y1 [...,xn,yn]

+.TQ

+.B draw-points \fPx1,y1 [...,xn,yn]

+Draws a list of points at the specified coordinates.  Example:

+.EX

+points +1,+2, +1,+4, +1,+6

+.EE

+.TP 8

+.B segments \fPx1,y1,x2,y2 [...,xn,yn]

+.TQ

+.B draw-segments \fPx1,y1,x2,y2 [...,xn,yn]

+Draws a list of segment lines.  The number of parameters must be multiple

+of 4.  Example:

+.EX

+segments +1,+2,+1,-3, +2,-2,-3,-2

+.EE

+.TP 8

+.B shape-mode \fPmode

+Sets the shape mode used in \fIfill-polygon\fP.  Accepted parameters are

+"complex", "convex" or "nonconvex", which set the shape mode to Complex,

+Convex or Nonconvex, accordingly.  Example:

+.EX

+shape-mode convex

+.EE

+.TP 8

+.B stipple \fPpixmap-spec

+Sets the pixmap for a stipple.  Requires a pixmap parameter, as described

+in the \fBPIXMAPS\fP section below.  Example:

+.EX

+stipple plaid

+.EE

+.TP 8

+.B subwindow-mode \fPmode

+Sets the subwindow mode in the GC.  Accepted parameters are

+"includeinferiors" and "clipbychildren", which set the subwindow mode to

+IncludeInferiors or ClipByChildren, respectively.  Example:

+.EX

+subwindow-mode includeinferiors

+.EE

+.TP 8

+.B tile \fPpixmap-spec

+Sets the pixmap for a tile.  Requires a pixmap parameter, as described

+in the \fBPIXMAPS\fP section below.  Example:

+.EX

+tile xlogo11?foreground=red&background=gray80

+.EE

+.TP 8

+.B ts-origin \fPx,y

+Sets the tile stipple x and y origin.  Requires two arguments, a x and y

+coordinate.  Example:

+.EX

+ts-origin 10,10

+.EE

+.TP 8

+.B umask

+Disables the GC mask, if it has been set with the command \fImask\fP.

+Requires no arguments.

+.PP

+Example for drawing a shadow effect in a widget:

+.EX

+foreground gray30;\e

+draw-lines +1,-1,-1,-1,-1,+1;\e

+foreground gray85;\e

+draw-lines -1,+0,+0,+0,+0,-1

+.EE

+.SH PIXMAPS

+A String to Pixmap converter has been  added to \fBXaw\fP.  This converter

+is meant to be extended, and has enough abstraction to allow loading

+several image formats.  It uses a format that resembles a \fIURL\fP, with

+the syntax:

+.PP

+.I [type:]name[?arg=val[{&}...]]

+.PP

+\fBType\fP can be one of \fIbitmap\fP, \fIgradient\fP or \fIxpm\fP.

+.PP

+\fBName\fP may be a file name, or, in the case of type \fIgradient\fP, may be

+either \fIvertical\fP or \fIhorizontal\fP.

+.PP

+\fBArg=val\fP is a list of arguments to the converter.  An argument list is

+preceded by a question mark, and multiple arguments are separated by

+ampersands.  The most common arguments are \fIforeground\fP and

+\fIbackground\fP.  Gradients also support the arguments \fIstart\fP and

+\fIend\fP (colors with which to start and end the gradient); the

+\fPsteps\fP argument, to allow using less colors; and the \fIdimension\fP

+argument to specify the size of the gradient.	The \fIxpm\fP converter

+understands the \fIcloseness\fP argument, which aids in using fewer colors

+(useful if you have a limited colormap).

+.SH TEXT WIDGET

+Most of the changes to this version of the Xaw library were done in the

+TextWidget, TextSrcObject, TextSinkObject and related files.

+.PP

+A couple of highly visible changes in the Text widget are due to many bugs

+in the Xaw6 implementation involving scrollbars and auto-resizing.

+Scrollbars being added or removed caused several problems in keeping the

+text cursor visible, and in Xaw6 it was very easy to have a widget thinking

+the cursor was visible, when it was not.  Also, permitting automatic

+resizing of the widget to a larger geometry created other problems, making

+it difficult to have a consistent layout in the application, and, if the

+window manager did not interfere, windows larger than the screen could

+result.  Therefore, some functionality involving scrollbars and

+auto-resizing has been disabled; see the section on new and modified

+Text widget resources below.

+.PP

+The Text widget's default key bindings were originally based on the Emacs

+text editor.  In this release, even more operations familiar to Emacs users

+have been added.  New text actions include:

+.TP 8

+.B indent

+Indents text blocks.  Not bound by default.  The Text widget also does not

+attempt to perform auto-indentation of its source object by default.

+.TP 8

+.B keyboard-reset

+Resets the keyboard state.  Reverts the action multiplier to 1, and if undo

+is enabled, toggles between undo and redo.  Bound by default to

+\fIControl<Key>G\fP.

+.TP 8

+.B kill-ring-yank

+In this version of Xaw, text killed in any text field is kept in memory,

+allowing cut and paste operations internally to the program between text

+fields.  Bound by default to \fIMeta<Key>Y\fP.

+.TP 8

+.B numeric

+Listed here only for purposes of documentation.  Called by default when one

+of the characters \fI1, 2, 3, 4, 5, 6, 7, 8, 9, 0,\fP or \fI-\fP is typed,

+allowing composition of the multiplication number of text actions.

+.TP 8

+.B set-keyboard-focus

+Sets the input focus of the top level widget to the text field.  Not

+enabled by default, but bound to the \fI<Btn1Down>\fP event.

+.TP 8

+.B toggle-overwrite

+Toggles overwrite mode.  In overwrite mode, any text inserted in a text

+field will replace existing text.  Bound by default to \fI<Key>Insert\fP.

+.TP 8

+.B undo

+Sets the \fIenableUndo\fP resource of the textSrcObject.  Not enabled by

+default, but bound to \fIControl<Key>_\fP.

+.PP

+New and modified Text widget resources include:

+.TP 8

+.B justify (\fPClass\fB Justify)

+Sets the text justification.  Can be one of \fIleft, right, center\fP, or

+\fIfull\fP.  Only enabled when the \fIautoFill\fP resource is set, and the

+resources \fIleftColumn\fP and \fIrightColumn\fP are correctly set.

+.TP 8

+.B leftColumn (\fPClass\fB Column)

+Specifies the left column at which to break text.  Text lines started with

+an alphanumeric character will automatically start at this column.

+.TP 8

+.B positionCallback (\fPClass\fB Callback)

+Allows installation of a callback to be called every time the cursor is

+moved, and/or the file changes its size.  The callback is called with a

+pointer to a structure containing the following data:

+.nf

+typedef struct {

+    int line_number;

+    int column_number;

+    XawTextPosition insert_position;

+    XawTextPosition last_position;

+    Boolean overwrite_mode;

+} XawTextPositionInfo;

+.fi

+This callback is intended to help programmers write text editors based

+on the Xaw widget set.

+.TP 8

+.B resize (\fPClass\fB Resize)

+No longer supported, but recognized for backward compatibility with

+resource specifications written for the Xaw6 Text widget.

+.TP 8

+.B rightColumn (\fPClass\fB Column)

+Specifies the right column at which to break text.  Text lines started with

+an alphanumeric character will automatically end at this column.

+.TP 8

+.B scrollHorizontal (\fPClass\fB Scroll)

+.TQ

+.B scrollVertical (\fPClass\fB Scroll)

+These resources control the placement of scrollbars on the left and bottom

+edges of the Text widget.  They accept the values \fIXawtextScrollAlways\fP

+and \fIXawtextScrollNever\fP.  A converter is registered for this resource

+that will convert the following strings: \fIalways\fP and \fInever\fP.  The

+value \fIXawtextScrollWhenNeeded\fP (and \fIwhenNeeded\fP, recognized by

+the converter), is accepted for backwards compatibility with resource

+specifications written for the Xaw6 Text widget, but ignored (effectively

+treated as \fIXawtextScrollNever\fP).

+.SH TEXT SOURCE OBJECT

+The textSrcObject allows display of its contents to more than one window,

+and also stores undo information. The new resources for the textSrcObject

+are:

+.TP 8

+.B callback (\fPClass\fB Callback)

+Previous versions of Xaw had this resource in subclasses of the TextSource

+object.  This was changed to make it possible to tell the callback the

+state of the text when undo is enabled.

+.TP 8

+.B enableUndo (\fPClass\fB Undo)

+A boolean resource that enables or disables the undo function.  The default

+value is False.

+.TP 8

+.B sourceChanged (\fPClass\fB Changed)

+Like the callback resource, this resource was previously in subclasses of

+the TextSource object.  It is now in the textSrcObject to control the

+changed/unchanged state when undo is enabled.

+.SH TEXT SINK OBJECT

+The textSinkObject subclasses asciiSinkObject and multiSinkObject have been

+changed slightly to use a new cursor shape (no longer a caret at the

+baseline) that indicates the input focus of the text widget, and allow

+specification of the cursor color.  The new resource is:

+.TP 8

+.B cursorColor (\fPClass\fB Color)

+Sets the cursor color of the text.  This color is also used to draw

+selected text.

+.SH SIMPLE MENU WIDGET

+The simpleMenuWidget algorithm to lay out menu entries has been changed to

+enable multiple columns when a single column does not fit on the screen.

+It was also modified to enable submenus.

+.SH SME BSB OBJECT

+A new resource has been added to the smeBSBObject to allow binding submenus

+to it.  The new resource is:

+.TP 8

+.B menuName (\fPClass\fB MenuName)

+Specifies the name of the popup widget to be popped up when the pointer is

+over the menu entry, or NULL.  Note that the named menu must be a child of

+the popup parent of the smeBSBObject.

+.SH AUTHORS

+The original X Consortium version of the Athena Widget Set and its

+documentation were the work of many people, including Chris D. Peterson,

+Ralph Swick, Mark Ackerman, Donna Converse, Jim Fulton, Loretta

+Guarino-Reid, Charles Haynes, Rich Hyde, Mary Larson, Joel McCormack, Ron

+Newman, Jeanne Rich, Terry Weissman, Mike Gancarz, Phil Karlton, Kathleen

+Langone, Ram Rao, Smokey Wallace, Al Mento, and Jean Diaz.

+.PP

+The additions and modifications to \fIXaw\fR which were

+originally made for XFree86 were written by Paulo

+C\('esar Pereira de Andrade.

+.SH SEE ALSO

+.I Athena Widget Set - C Language Interface