xserver libXext git update 20-12-2010

2 files changed, 0 insertions, 1390 deletions

diff --git a/libXext/specs/dbelib.tex b/libXext/specs/dbelib.tex
deleted file mode 100644
index e9793bc32..000000000
--- a/libXext/specs/dbelib.tex
+++ /dev/null
@@ -1,620 +0,0 @@
-% edited for DP edits and code consistency w/ core protocol/xlib 3/30/96

-% split into separate library and protocol documentos 4/15/96

-\documentstyle{article}

-\pagestyle{myheadings}

-\markboth{Double Buffer Extension Specification}{Double Buffer Extension Specification}

-\setlength{\parindent}{0 pt}

-\setlength{\parskip}{6pt}

-\setlength{\topsep}{0 pt}

-

-% Request names are literal symbols; therefore, use the same font for both.

-\newcommand{\requestname}[1]{{\tt #1}}

-\newcommand{\literal}[1]{\mbox{\tt #1}}

-

-\newcommand{\encodingsection}[1]{{\bf #1}}

-\newcommand{\requestsection}[1]{{\bf #1}}

-

-% Font treatment of type names differs between protocol and library sections.

-\newcommand{\libtypename}[1]{\mbox{\tt #1}}

-\newcommand{\typename}[1]{\mbox{\rm #1}}  % default font

-\newcommand{\typeargname}[1]{\mbox{\rm #1}}  % default font

-\newcommand{\argname}[1]{\mbox{\it #1}}

-\newcommand{\argdecl}[2]{\argname{#1} & : \typename{#2}\\}

-\newcommand{\areplyargdecl}[2]{#1 & : \typename{#2}\\}

-

-\newenvironment{arequest}[1]{\requestsection{#1} \\ \begin{tabular}{ll}}{\end{tabular}}

-\newcommand{\areply}{$\Rightarrow$\\}

-

-\newcommand{\etabstops}{\hspace*{0cm}\=\hspace*{1cm}\=\hspace*{5cm}\=\kill}

-

-\newcommand{\eargdecl}[3]{\> #1 \> \typename{#2} \> #3 \\}

-

-\newenvironment{keeptogether}{\vbox \bgroup}{\egroup}

-

-\newenvironment{erequest}[3]{\pagebreak[3] \begin{keeptogether} \encodingsection{#1} \begin{tabbing} \etabstops \eargdecl{1}{CARD8}{major-opcode} \eargdecl{1}{#2}{minor-opcode} \eargdecl{2}{#3}{request length}}{\end{tabbing} \end{keeptogether}}

-

-\newenvironment{eerror}[1]{\begin{keeptogether} \encodingsection{#1} \begin{tabbing} \etabstops }{\end{tabbing} \end{keeptogether}}

-

-\newenvironment{etypedef}[1]{\begin{keeptogether} \typename{#1} \begin{tabbing} \etabstops }{\end{tabbing} \end{keeptogether}}

-

-\newcommand{\cfunctionname}[1]{\mbox{\tt #1}}

-\newcommand{\cfunctiondecl}[1]{\mbox{\rm #1}}

-\newcommand{\cargdecl}[2]{\penalty -1\typename{#1} \argname{#2}}

-\newenvironment{cfunction}[2]{\begin{sloppypar}\begin{keeptogether}\vspace{5mm}\typename{#1}\\ \cfunctiondecl{#2}\ (}{)\end{keeptogether}\end{sloppypar}{\hangafter=2 \hangindent=20pt \raggedright\par}}

-

-% make things easier with all the long names

-\spaceskip .3333em plus 5em

-\tolerance=2000

-

-\begin{document}

-

-\title{Double Buffer Extension Library\\Protocol Version 1.0\\X Consortium Standard}

-\author{Ian Elliott\\Hewlett-Packard Company \and David P. Wiggins\\X Consortium, Inc.}

-\maketitle

-\thispagestyle{empty}

-

-\eject

-

-Copyright \copyright 1989 X Consortium, Inc. and Digital Equipment Corporation.

-

-Copyright \copyright 1992 X Consortium, Inc. and Intergraph Corporation.

-

-Copyright \copyright 1993 X Consortium, Inc. and Silicon Graphics, Inc.

-

-Copyright \copyright 1994, 1995 X Consortium, Inc. and Hewlett-Packard Company.

-

-Permission to use, copy, modify, and distribute this documentation for

-any purpose and without fee is hereby granted, provided that the above

-copyright notice and this permission notice appear in all copies.

-Digital Equipment Corporation, Intergraph Corporation, Silicon

-Graphics, Hewlett-Packard, and the X Consortium make no

-representations about the suitability for any purpose of the

-information in this document.  This documentation is provided ``as is''

-without express or implied warranty.

-

-\eject

-

-\section{Introduction}

-

-The Double Buffer Extension (DBE) provides a standard way to utilize

-double-buffering within the framework of the X Window System.

-Double-buffering uses two buffers, called front and back, which hold

-images.  The front buffer is visible to the user; the back buffer is

-not.  Successive frames of an animation are rendered into the back

-buffer while the previously rendered frame is displayed in the front

-buffer.  When a new frame is ready, the back and front buffers swap

-roles, making the new frame visible.  Ideally, this exchange appears to

-happen instantaneously to the user and with no visual artifacts.  Thus,

-only completely rendered images are presented to the user, and they remain

-visible during the entire time it takes to render a new frame.  The

-result is a flicker-free animation.

-

-\section{Goals}

-

-This extension should enable clients to:

-\begin{itemize}

-

-\item Allocate and deallocate double-buffering for a window.

-

-\item Draw to and read from the front and back buffers associated with

-a window.

-

-\item Swap the front and back buffers associated with a window.

-

-\item Specify a wide range of actions to be taken when a window is

-swapped.  This includes explicit, simple swap actions (defined

-below), and more complex actions (for example, clearing ancillary buffers)

-that can be put together within explicit ``begin'' and ``end''

-requests (defined below).

-

-\item Request that the front and back buffers associated with multiple

-double-buffered windows be swapped simultaneously.

-

-\end{itemize}

-

-In addition, the extension should:

-

-\begin{itemize}

-

-\item Allow multiple clients to use double-buffering on the same window.

-

-\item Support a range of implementation methods that can capitalize on

-existing hardware features.

-

-\item Add no new event types.

-

-\item Be reasonably easy to integrate with a variety of direct graphics

-hardware access (DGHA) architectures.

-\end{itemize}

-

-\section{Concepts}

-

-Normal windows are created using the core \requestname{CreateWindow}

-request, which allocates a set of window attributes and, for

-\literal{InputOutput} windows, a front buffer,

-into which an image can be drawn.

-The contents of this buffer will be displayed when the window is

-visible.

-

-This extension enables applications to use double-buffering with a

-window.  This involves creating a second buffer, called a back buffer,

-and associating one or more back buffer names (\typename{XID}s) with

-the window for use when referring to (that is, drawing to or reading

-from) the window's back buffer.  The back buffer name is a

-\typename{DRAWABLE} of type \typename{BACKBUFFER}.

-

-DBE provides a relative double-buffering model.  One XID, the window,

-always refers to the front buffer.  One or more other XIDs, the back buffer

-names, always refer to the back buffer.  After a buffer swap, the

-window continues to refer to the (new) front buffer, and the

-back buffer name continues to refer to the (new) back buffer.  Thus,

-applications and toolkits that want to just render to the back buffer

-always use the back buffer name for all drawing requests to the

-window.  Portions of an application that want to render to the front

-buffer always use the window XID for all drawing requests to the

-window.

-

-Multiple clients and toolkits can all use double-buffering on the same

-window.  DBE does not provide a request for querying whether a window

-has double-buffering support, and if so, what the back buffer name is.

-Given the asynchronous nature of the X Window System, this would cause

-race conditions.  Instead, DBE allows multiple back buffer names to

-exist for the same window; they all refer to the same physical back

-buffer.  The first time a back buffer name is allocated for a window,

-the window becomes double-buffered and the back buffer name is

-associated with the window.  Subsequently, the window already is a

-double-buffered window, and nothing about the window changes when a

-new back buffer name is allocated, except that the new back buffer

-name is associated with the window.  The window remains

-double-buffered until either the window is destroyed or until all of

-the back buffer names for the window are deallocated.

-

-In general, both the front and back buffers are treated the same.  In

-particular, here are some important characteristics:

-

-\begin{itemize}

-

-\item Only one buffer per window can be visible at a time (the

-front buffer).

-

-\item Both buffers associated with a window have the same visual type,

-depth, width, height, and shape as the window.

-

-\item Both buffers associated with a window are ``visible'' (or

-``obscured'') in the same way.  When an \literal{Expose} event is

-generated for

-a window, both buffers should be considered to be damaged in the

-exposed area.  Damage that occurs to either buffer will result in an

-\literal{Expose} event on the window.  When a double-buffered window is

-exposed,

-both buffers are tiled with the window background, exactly as stated

-by the core protocol.  Even though the back buffer is not visible,

-terms such as obscure apply to the back buffer as well as to the front

-buffer.

-

-\item It is acceptable at any time to pass a \typename{BACKBUFFER} in

-any request, notably any core or extension drawing request, that

-expects a \typename{DRAWABLE}.  This enables an application to draw

-directly into \typename{BACKBUFFER}s in the same fashion as it would

-draw into any other \typename{DRAWABLE}.

-

-\item It is an error (\literal{Window}) to pass a \typename{BACKBUFFER} in a

-core request that expects a Window.

-

-\item A \typename{BACKBUFFER} will never be sent by core X in a reply,

-event, or error where a Window is specified.

-\item If core X11 backing-store and save-under applies to a

-double-buffered window, it applies to both buffers equally.

-

-\item If the core \requestname{ClearArea} request is executed on a

-double-buffered window, the same area in both the front and back

-buffers is cleared.

-

-\end{itemize}

-

-The effect of passing a window to a request that accepts a

-\typename{DRAWABLE} is unchanged by this extension.  The window and

-front buffer are synonomous with each other.  This includes obeying

-the \requestname{GetImage} semantics and the subwindow-mode semantics

-if a core graphics context is involved.  Regardless of whether the

-window was explicitly passed in a \requestname{GetImage} request, or

-implicitly referenced (that is, one of the window's ancestors was passed

-in the request), the front (that is, visible) buffer is always referenced.

-Thus, DBE-na\"{\i}ve screen dump clients will always get the front buffer.

-\requestname{GetImage} on a back buffer returns undefined image

-contents for any obscured regions of the back buffer that fall within

-the image.

-

-Drawing to a back buffer always uses the clip region that would be

-used to draw to the front buffer with a GC subwindow-mode of

-\literal{ClipByChildren}.  If an ancestor of a double-buffered window is drawn

-to with a core GC having a subwindow-mode of \literal{IncludeInferiors}, the

-effect on the double-buffered window's back buffer depends on the

-depth of the double-buffered window and the ancestor.  If the depths

-are the same, the contents of the back buffer of the double-buffered

-window are not changed.  If the depths are different, the contents of

-the back buffer of the double-buffered window are undefined for the

-pixels that the \literal{IncludeInferiors} drawing touched.

-

-DBE adds no new events.  DBE does not extend the semantics of any

-existing events with the exception of adding a new \typename{DRAWABLE}

-type called \typename{BACKBUFFER}.  If events, replies, or errors that

-contain a \typename{DRAWABLE} (for example, \literal{GraphicsExpose}) are

-generated in

-response to a request, the \typename{DRAWABLE} returned will be the

-one specified in the request.

-

-DBE advertises which visuals support double-buffering.

-

-DBE does not include any timing or synchronization facilities.

-Applications that need such facilities (for example, to maintain a constant

-frame rate) should investigate the Synchronization Extension, an X

-Consortium standard.

-

-\subsection{Window Management Operations}

-

-The basic philosophy of DBE is that both buffers are treated the same by

-core X window management operations.

-

-When the core \requestname{DestroyWindow} is executed on a

-double-buffered window, both buffers associated with the window are

-destroyed, and all back buffer names associated with the window are

-freed.

-

-If the core \requestname{ConfigureWindow} request changes the size of

-a window, both buffers assume the new size.  If the window's size

-increases, the effect on the buffers depends on whether the

-implementation honors bit gravity for buffers.  If bit gravity is

-implemented, then the contents of both buffers are moved in accordance

-with the window's bit gravity (see the core

-\requestname{ConfigureWindow} request), and the remaining areas are

-tiled with the window background.  If bit gravity is not implemented,

-then the entire unobscured region of both buffers is tiled with the

-window background.  In either case, \literal{Expose} events are generated for

-the region that is tiled with the window background.

-

-If the core \requestname{GetGeometry} request is executed on a

-\typename{BACKBUFFER}, the returned x, y, and border-width will be

-zero.

-

-If the Shape extension \requestname{ShapeRectangles},

-\requestname{ShapeMask}, \requestname{ShapeCombine}, or

-\requestname{ShapeOffset} request is executed on a double-buffered

-window, both buffers are reshaped to match the new window shape.  The

-region difference is the following:

-

-\[ D = new shape - old shape \]

-

-It is tiled with the window background in both buffers,

-and \literal{Expose} events are generated for D.

-

-\subsection{Complex Swap Actions}

-

-DBE has no explicit knowledge of ancillary buffers (for example, depth buffers

-or alpha buffers), and only has a limited set of defined swap actions.

-Some applications may need a richer set of swap actions than DBE

-provides.  Some DBE implementations have knowledge of ancillary

-buffers, and/or can provide a rich set of swap actions.  Instead of

-continually extending DBE to increase its set of swap actions, DBE

-provides a flexible ``idiom'' mechanism.  If an application's needs

-are served by the defined swap actions, it should use them; otherwise,

-it should use the following method of expressing a complex swap action

-as an idiom.  Following this policy will ensure the best possible

-performance across a wide variety of implementations.

-

-As suggested by the term ``idiom,'' a complex swap action should be

-expressed as a group/series of requests.  Taken together, this group

-of requests may be combined into an atomic operation by the

-implementation, in order to maximize performance.  The set of idioms

-actually recognized for optimization is implementation dependent.  To

-help with idiom expression and interpretation, an idiom must be

-surrounded by two protocol requests: \requestname{DBEBeginIdiom} and

-\requestname{DBEEndIdiom}.  Unless this begin-end pair surrounds the

-idiom, it may not be recognized by a given implementation, and

-performance will suffer.

-

-For example, if an application wants to swap buffers for two windows,

-and use core X to clear only certain planes of the back buffers, the

-application would issue the following protocol requests as a group, and

-in the following order:

-

-\begin{itemize}

-\item \requestname{DBEBeginIdiom} request.

-\item \requestname{DBESwapBuffers} request with XIDs for two windows, each

-of which uses a swap action of \literal{Untouched}.

-\item Core X \requestname{PolyFillRectangle} request to the back buffer of one window.

-\item Core X \requestname{PolyFillRectangle} request to the back buffer of the other window.

-\item \requestname{DBEEndIdiom} request.

-\end{itemize}

-

-The \requestname{DBEBeginIdiom} and \requestname{DBEEndIdiom} requests

-do not perform any actions themselves.  They are treated as markers by

-implementations that can combine certain groups/series of requests as

-idioms, and are ignored by other implementations or for nonrecognized

-groups/series of requests.  If these requests are sent out of order,

-or are mismatched, no errors are sent, and the requests are executed

-as usual, though performance may suffer.

-

-An idiom need not include a \requestname{DBESwapBuffers} request.  For

-example, if a swap action of \literal{Copied} is desired, but only some of the

-planes should be copied, a core X \requestname{CopyArea} request may

-be used instead of \requestname{DBESwapBuffers}.  If

-\requestname{DBESwapBuffers} is included in an idiom, it should

-immediately follow the \requestname{DBEBeginIdiom} request.  Also,

-when the \requestname{DBESwapBuffers} is included in an idiom, that

-request's swap action will still be valid, and if the swap action

-might overlap with another request, then the final result of the idiom

-must be as if the separate requests were executed serially.  For

-example, if the specified swap action is \literal{Untouched}, and if a

-\requestname{PolyFillRectangle} using a client clip rectangle is done

-to the window's back buffer after the \requestname{DBESwapBuffers}

-request, then the contents of the new back buffer (after the idiom)

-will be the same as if the idiom was not recognized by the

-implementation.

-

-It is highly recommended that Application Programming Interface (API) 

-providers define, and application developers use, ``convenience'' functions 

-that allow client applications to call one procedure that encapsulates common idioms.

-These functions will generate the \requestname{DBEBeginIdiom} request,

-the idiom requests, and \requestname{DBEEndIdiom} request.  Usage of

-these functions will ensure best possible performance across a wide

-variety of implementations.

-

-\section{C Language Binding}

-

-The header for this extension is \verb|<X11/extensions/Xdbe.h>|.  All

-identifier names provided by this header begin with Xdbe.

-

-\subsection{Types}

-

-The type \libtypename{XdbeBackBuffer} is a \libtypename{Drawable}.

-

-The type \libtypename{XdbeSwapAction} can be one of the constants

-\literal{XdbeUndefined}, \literal{XdbeBackground},

-\literal{XdbeUntouched}, or \literal{XdbeCopied}.

-

-\subsection{C Functions}

-

-The C functions provide direct access to the protocol and add no

-additional semantics.  For complete details on the effects of these

-functions, refer to the appropriate protocol request, which can be

-derived by replacing Xdbe at the start of the function name with DBE\@.

-All functions that have return type \libtypename{Status} will return

-nonzero for success and zero for failure.

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{Status}{XdbeQueryExtension}

-\cargdecl{Display *}{dpy},

-\cargdecl{int *}{major\_version\_return},

-\cargdecl{int *}{minor\_version\_return}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeQueryExtension} sets major\_version\_return and

-minor\_version\_return to the major and minor DBE protocol

-version supported by the server.  If the DBE library is compatible

-with the version returned by the server, it returns

-nonzero.  If dpy does not support the DBE extension, or if

-there was an error during communication with the server, or if the

-server and library protocol versions are incompatible, it

-returns zero.  No other Xdbe functions may be called before this

-function.  If a client violates this rule, the effects of all

-subsequent Xdbe calls that it makes are undefined.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{XdbeScreenVisualInfo *}{XdbeGetVisualInfo}

-\cargdecl{Display *}{dpy},

-\cargdecl{Drawable *}{screen\_specifiers},

-\cargdecl{int *}{num\_screens}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeGetVisualInfo}  returns information about which visuals support

-double buffering.  The argument num\_screens specifies how many

-elements there are in the screen\_specifiers list.  Each

-drawable in screen\_specifiers designates a screen for which

-the supported visuals are being requested.  If num\_screens

-is zero, information for all screens is requested.  In this case, upon

-return from this function, num\_screens will be set to the

-number of screens that were found.  If an error occurs, this function

-returns NULL; otherwise, it returns a pointer to a list of

-\libtypename{XdbeScreenVisualInfo} structures of length num\_screens.

-The {\it n}th element in the returned list corresponds to the {\it n}th

-drawable in the screen\_specifiers list, unless

-num\_screens was passed in with the value zero, in which

-case the {\it n}th element in the returned list corresponds to the

-{\it n}th screen of the server, starting with screen zero.

-

-The \libtypename{XdbeScreenVisualInfo} structure has the following

-fields:

-

-\begin{tabular}{lll}

-\typename{int} & \argname{count} & number of items in visinfo \\

-\typename{XdbeVisualInfo *} & \argname{visinfo} & list of visuals and depths for this screen \\

-\end{tabular}

-

-The \libtypename{XdbeVisualInfo} structure has the following fields:

-

-\begin{tabular}{lll}

-\typename{VisualID} & \argname{visual} & one visual ID that supports double-buffering\\

-\typename{int} & \argname{depth} & depth of visual in bits \\

-\typename{int} & \argname{perflevel} & performance level of visual \\

-\end{tabular}

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{void }{XdbeFreeVisualInfo}

-\cargdecl{XdbeScreenVisualInfo *}{visual\_info}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeFreeVisualInfo} frees the list of \libtypename{XdbeScreenVisualInfo}

-returned by \cfunctionname{XdbeGetVisualInfo}.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{XdbeBackBuffer}{XdbeAllocateBackBufferName}

-\cargdecl{Display *}{dpy},

-\cargdecl{Window}{window},

-\cargdecl{XdbeSwapAction}{swap\_action}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeAllocateBackBufferName} returns a drawable ID used to refer

-to the back buffer of the specified window. 

-The swap\_action is a hint to indicate the swap action 

-that will likely be used in subsequent calls to

-\cfunctionname{XdbeSwapBuffers}. 

-The actual swap action used in calls to

-\cfunctionname{XdbeSwapBuffers} does not have

-to be the same as the swap\_action passed to this function,

-though clients are encouraged to provide accurate information whenever

-possible.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{Status}{XdbeDeallocateBackBufferName}

-\cargdecl{Display *}{dpy},

-\cargdecl{XdbeBackBuffer}{buffer}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeDeallocateBackBufferName} frees the specified

-drawable ID, buffer,

-that was obtained via \cfunctionname{XdbeAllocateBackBufferName}.  The buffer

-must be a valid name for the back buffer of a window, or an

-\literal{XdbeBadBuffer}

-error results.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{Status}{XdbeSwapBuffers}

-\cargdecl{Display *}{dpy},

-\cargdecl{XdbeSwapInfo *}{swap\_info},

-\cargdecl{int}{num\_windows}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeSwapBuffers} swaps the front and back buffers for a list of windows.

-The argument num\_windows specifies how many windows are to

-have their buffers swapped; it is the number of elements in the

-swap\_info array.  The argument swap\_info

-specifies the information needed per window to do the swap.

-

-The \libtypename{XdbeSwapInfo} structure has the following fields:

-

-\begin{tabular}{lll}

-\typename{Window} & \argname{swap\_window} & window for which to swap buffers \\

-\typename{XdbeSwapAction} & \argname{swap\_action} & swap action to use for this swap\_window \\

-\end{tabular}

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{Status}{XdbeBeginIdiom}

-\cargdecl{Display *}{dpy}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeBeginIdiom} marks the beginning of an idiom sequence.

-See section 3.2

-for a complete discussion of idioms.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{Status}{XdbeEndIdiom}

-\cargdecl{Display *}{dpy}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeEndIdiom} marks the end of an idiom sequence.

-\end{keeptogether}

-

-% start marker

-\begin{keeptogether}

-\begin{cfunction}{XdbeBackBufferAttributes *}{XdbeGetBackBufferAttributes}

-\cargdecl{Display *}{dpy},

-\cargdecl{XdbeBackBuffer}{buffer}

-\end{cfunction}

-% end marker

-

-\cfunctionname{XdbeGetBackBufferAttributes} returns the attributes associated 

-with the specified buffer.

-

-The \libtypename{XdbeBackBufferAttributes} structure has the following fields:

-

-\begin{tabular}{lll}

-\typename{Window} & \argname{window} & window that buffer belongs to \\

-\end{tabular}

-

-If buffer is not a valid \libtypename{XdbeBackBuffer},

-window is set to \literal{None}.

-

-The returned \libtypename{XdbeBackBufferAttributes} structure can be

-freed with the Xlib function \cfunctionname{XFree}.

-\end{keeptogether}

-

-\begin{keeptogether}

-\subsection{Errors}

-

-The \libtypename{XdbeBufferError} structure has the following fields:

-

-\begin{tabular}{lll}

-\typename{int} & \argname{type} \\

-\typename{Display *} & \argname{display}& Display the event was read from\\

-\typename{XdbeBackBuffer} &  \argname{buffer}& resource id \\

-\typename{unsigned long} & \argname{serial}& serial number of failed request\\

-\typename{unsigned char} & \argname{error\_code}& error base + \literal{XdbeBadBuffer}\\

-\typename{unsigned char} & \argname{request\_code}& Major op-code of failed request\\

-\typename{unsigned char} & \argname{minor\_code}& Minor op-code of failed request\\

-\end{tabular}

-\end{keeptogether}

-

-\pagebreak[4]

-\section{Acknowledgements}

-

-We wish to thank the following individuals who have contributed their

-time and talent toward shaping the DBE specification:

-

-T. Alex Chen, IBM;

-Peter Daifuku, Silicon Graphics, Inc.; 

-Ian Elliott, Hewlett-Packard Company;

-Stephen Gildea, X Consortium, Inc.;

-Jim Graham, Sun;

-Larry Hare, AGE Logic;

-Jay Hersh, X Consortium, Inc.;

-Daryl Huff, Sun;

-Deron Dann Johnson, Sun;

-Louis Khouw, Sun;

-Mark Kilgard, Silicon Graphics, Inc.;

-Rob Lembree, Digital Equipment Corporation;

-Alan Ricker, Metheus;

-Michael Rosenblum, Digital Equipment Corporation;

-Bob Scheifler, X Consortium, Inc.;

-Larry Seiler, Digital Equipment Corporation;

-Jeanne Sparlin Smith, IBM;

-Jeff Stevenson, Hewlett-Packard Company;

-Walter Strand, Metheus;

-Ken Tidwell, Hewlett-Packard Company; and

-David P. Wiggins, X Consortium, Inc.

-

-Mark provided the impetus to start the DBE project.  Ian wrote the

-first draft of the specification.  David served as architect.

-

-\section{References}

-

-Jeffrey Friedberg, Larry Seiler, and Jeff Vroom, ``Multi-buffering Extension

-Specification Version 3.3.''

-

-Tim Glauert, Dave Carver, Jim Gettys, and David P. Wiggins,

-``X Synchronization Extension Version 3.0.'' 

-

-\end{document}

diff --git a/libXext/specs/synclib.tex b/libXext/specs/synclib.tex
deleted file mode 100644
index 0775eb9fd..000000000
--- a/libXext/specs/synclib.tex
+++ /dev/null
@@ -1,770 +0,0 @@
-% Copyright 1991 by Olivetti Research Limited, Cambridge, England and

-% Digital Equipment Corporation, Maynard, Massachusetts.

-%

-%                        All Rights Reserved

-%

-% Permission to use, copy, modify, and distribute this software and its 

-% documentation for any purpose and without fee is hereby granted, 

-% provided that the above copyright notice appear in all copies and that

-% both that copyright notice and this permission notice appear in 

-% supporting documentation, and that the names of Digital or Olivetti

-% not be used in advertising or publicity pertaining to distribution of the

-% software without specific, written prior permission.  

-%

-% DIGITAL AND OLIVETTI DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,

-% INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

-% SHALL THEY BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR

-% ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER

-% IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT

-% OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

-

-%\documentstyle[a4]{article}

-\documentstyle{article}

-

-\setlength{\parindent}{0 pt}

-\setlength{\parskip}{6pt}

-

-% Protocol Section

-% For the DP book, these four should be assigned the font for global symbols.

-

-\newcommand{\request}[1]{{\bf #1}}

-\newcommand{\event}[1]{{\bf #1}}

-\newcommand{\error}[1]{{\bf #1}}

-\newcommand{\enum}[1]{{\bf #1}}

-

-% The following fonts are not reassigned for the DP book.

-

-\newcommand{\system}[1]{{\sc #1}}

-\newcommand{\param}[1]{{\it #1}}

-

-\newcommand{\eventdef}[1]{\item {\bf#1}}

-\newcommand{\requestdef}[1]{\item {\bf#1}}

-\newcommand{\errordef}[1]{\item {\bf#1}}

-

-\newcommand{\defn}[1]{{\bf #1}}

-

-\newcommand{\tabstopsA}{\hspace*{4cm}\=\hspace*{1cm}\=\hspace*{7cm}\=\kill}

-\newcommand{\tabstopsB}{\hspace*{1cm}\=\hspace*{1cm}\=\hspace*{3cm}\=\kill}

-\newcommand{\tabstopsC}{\hspace*{1cm}\=\hspace*{1cm}\=\hspace*{5cm}\=\kill}

-

-% commands for formatting the API

-% For the DP book, these three should be assigned the font for global symbols.

-

-\newcommand{\cfunctionname}[1]{\mbox{\tt#1}}

-\newcommand{\ctypename}[1]{\mbox{\tt#1}}

-\newcommand{\cconst}[1]{\mbox{\tt#1}}

-

-% For the DP book, within function definitions, the type and name are in

-% the ordinary font; therefore, ctypenamedef and cfunctionnamedef are used

-% and defined below.

-\newcommand{\ctypenamedef}[1]{\mbox{#1}}

-\newcommand{\cfunctionnamedef}[1]{\mbox{#1}}

-\newcommand{\cargname}[1]{\mbox{\it#1}}

-\newcommand{\cstartfunction}[2]{\begin{sloppypar}\begin{samepage}\ctypenamedef{#1}\\ \cfunctionnamedef{#2}\ (}

-\newcommand{\cargdecl}[2]{\penalty -1\ctypenamedef{#1} \cargname{#2}}

-\newcommand{\cendfunctiondecl}{){\hangafter=2 \hangindent=20pt \raggedright\par}}

-\newcommand{\cendfuncdescription}{\end{samepage}\end{sloppypar}}

-

-\newcommand{\cstartmacro}[2]{\begin{sloppypar}\begin{samepage}\ctypenamedef{#1}\\ \cfunctionnamedef{#2}\ (}

-\newcommand{\cendmacrodecl}{)\par}

-\newcommand{\cendmacrodescription}{\end{samepage}\end{sloppypar}}

-

-% make things easier with all the long names

-\spaceskip .3333em plus 5em

-\tolerance=2000

-

-\begin{document}

-

-\begin{center}

-

-{\large X Synchronization Extension Library}\\[10pt]

-{\large Version 3.0}\\[15pt]

-{\large X Consortium Standard}\\[15pt]

-{\large X Version 11, Release 6.8}\\[15pt]

-{\it Tim Glauert}\\[0pt]

-{\tt thg@cam-orl.co.uk}\\[0pt]

-{\bf Olivetti Research / MultiWorks}\\[5pt]

-{\it Dave Carver}\\[0pt]

-{\tt dcc@athena.mit.edu}\\[0pt]

-{\bf Digital Equipment Corporation,}\\[0pt]

-{\bf MIT / Project Athena}\\[5pt]

-{\it Jim Gettys}\\[0pt]

-{\tt jg@crl.dec.com}\\[0pt]

-{\bf Digital Equipment Corporation,}\\[0pt]

-{\bf Cambridge Research Laboratory}\\[5pt]

-{\it David P. Wiggins}\\[0pt]

-{\tt dpw@x.org}\\[0pt]

-{\bf X Consortium, Inc.}\\[0pt]

-

-\end {center}

-

-Copyright 1991 by Olivetti Research Limited, Cambridge, England and

-Digital Equipment Corporation, Maynard, Massachusetts.

-

-{\small Permission to use, copy, modify, and distribute this documentation

-for any purpose and without fee is hereby granted, provided that the above

-copyright notice appear in all copies. Olivetti, Digital, MIT, and the

-X Consortium

-make no representations about the suitability for any purpose of the

-information in this document. This documentation is provided as is without

-express or implied warranty.}

-

-Copyright (c) 1991 X Consortium, Inc.

-

-{\small Permission is hereby granted, free of charge, to any person obtaining a copy

-of this software and associated documentation files (the ``Software''), to deal

-in the Software without restriction, including without limitation the rights

-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

-copies of the Software, and to permit persons to whom the Software is

-furnished to do so, subject to the following conditions:

-

-The above copyright notice and this permission notice shall be included in

-all copies or substantial portions of the Software.

-

-THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE

-X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-

-Except as contained in this notice, the name of the X Consortium shall not be

-used in advertising or otherwise to promote the sale, use or other dealings

-in this Software without prior written authorization from the X Consortium.}

-\eject

-

-\section{Synchronization Protocol}

-

-The core X protocol makes no guarantees about the relative order of execution

-of requests for different clients. This means that any synchronization between

-clients must be done at the client level in an operating system-dependent and

-network-dependent manner. Even if there was an accepted standard for such

-synchronization, the use of a network introduces unpredictable delays between

-the synchronization of the clients and the delivery of the resulting requests

-to the X server.

-

-The core X protocol also makes no guarantees about the time at which requests

-are executed, which means that all clients with real-time constraints must

-implement their timing on the host computer. Any such timings are subject to

-error introduced by delays within the operating system and network and are

-inefficient because of the need for round-trip requests that keep the client and

-server synchronized.

-

-The synchronization extension provides primitives that allow synchronization

-between clients to take place entirely within the X server. This removes any

-error introduced by the network and makes it possible to synchronize clients

-on different hosts running different operating systems. This is important for

-multimedia applications, where audio, video, and graphics data streams are

-being synchronized. The extension also provides internal timers within the X

-server to which client requests can be synchronized. This allows simple

-animation applications to be implemented without any round-trip requests and

-makes best use of buffering within the client, network, and server.

-

-\subsection{Description}

-

-The mechanism used by this extension for synchronization within the X server

-is to block the processing of requests from a client until a specific

-synchronization condition occurs. When the condition occurs, the client is

-released and processing of requests continues. Multiple clients may block on

-the same condition to give inter-client synchronization.  Alternatively, a

-single client may block on a condition such as an animation frame marker.

-

-The extension adds \defn{Counter} and \defn{Alarm} to the set of resources

-managed by the server. A counter has a 64-bit integer value that may be

-increased or decreased by client requests or by the server internally. A

-client can block by sending an \request{Await} request that waits until

-one of a set of synchronization conditions, called TRIGGERs, becomes TRUE.

-

-The \request{CreateCounter} request allows a client to create a

-\defn{Counter} that can be changed by explicit \request{SetCounter} and

-\request{ChangeCounter} requests. These can be used to implement

-synchronization between different clients.

-

-There are some counters, called \defn{System Counters}, that are changed by

-the server internally rather than by client requests. The effect of any change

-to a system counter is not visible until the server has finished processing the

-current request. In other words, system counters are apparently updated in the

-gaps between the execution of requests rather than during the actual execution

-of a request. The extension provides a system counter that advances with the

-server time as defined by the core protocol, and it may also provide counters

-that advance with the real-world time or that change each time the CRT

-screen is refreshed.  Other extensions may provide their own

-extension-specific system counters.

-

-The extension provides an \defn{Alarm} mechanism that allows clients to

-receive an event on a regular basis when a particular counter is changed.

-

-\section{C Language Binding}

-

-The C routines provide direct access to	the protocol and add

-no additional semantics.

-

-The include file for this extension is \verb|<X11/extensions/sync.h>|.

-

-Most of the names in the language binding are derived from the

-protocol names by prepending \cfunctionname{XSync} to the protocol name and changing

-the capitalization.

-

-\subsection{C Functions}

-

-Most of the following functions generate SYNC protocol requests.

-

-% start marker

-\cstartfunction{Status}{XSyncQueryExtension}

-\cargdecl{Display *}{dpy},

-\cargdecl{int *}{event\_base\_return},

-\cargdecl{int *}{error\_base\_return}

-\cendfunctiondecl

-% end marker

-

-If dpy supports the SYNC extension, \cfunctionname{XSyncQueryExtension}

-returns \cconst{True}, sets *event\_base\_return to the event number for the

-first SYNC event, and sets

-*error\_base\_return to the error number for the first SYNC

-error.  If dpy does not support the SYNC extension, it

-returns \cconst{False}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncInitialize}

-\cargdecl{Display *}{dpy},

-\cargdecl{int *}{major\_version\_return},

-\cargdecl{int *}{minor\_version\_return}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncInitialize} sets *major\_version\_return and

-*minor\_version\_return to the major/minor SYNC protocol

-version supported by the server.  If the XSync library is compatible

-with the version returned by the server, this function returns \cconst{True}.

-If dpy does not support the SYNC extension, or if there was an error during

-communication with the server, or if the server and library protocol

-versions are incompatible, this function returns \cconst{False}.  The only

-XSync function that may be called before this function is

-\cfunctionname{XSyncQueryExtension}.  If a client violates this rule,

-the effects of all XSync calls that it makes are undefined.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{XSyncSystemCounter *}{XSyncListSystemCounters}

-\cargdecl{Display *}{dpy},

-\cargdecl{int *}{n\_counters\_return}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncListSystemCounters} returns a pointer to an

-array of system counters supported by the display and sets 

-*n\_counters\_return to the number of

-counters in the array.  The array should be freed with

-\cfunctionname{XSyncFreeSystemCounterList}.  If dpy does not

-support the SYNC extension,

-or if there was an error during communication with the

-server, or if the server does not support any system counters, this

-function returns NULL.

-

-\ctypename{XSyncSystemCounter} has the following fields:

-

-\begin{tabular}{lll}

-char * & name; & /* null-terminated name of system counter */\\

-XSyncCounter & counter; & /* counter id of this system counter */\\

-XSyncValue & resolution; & /* resolution of this system counter */\\

-\end{tabular}

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{void}{XSyncFreeSystemCounterList}

-\cargdecl{XSyncSystemCounter *}{list}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncFreeSystemCounterList} frees the memory associated 

-with the system counter list returned by \cfunctionname{XSyncListSystemCounters}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{XSyncCounter}{XSyncCreateCounter}

-\cargdecl{Display *}{dpy}, 

-\cargdecl{XSyncValue}{initial\_value}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncCreateCounter} creates a counter on the dpy

-with the given initial\_value and returns the counter ID. 

-It returns \cconst{None} if dpy does not

-support the SYNC extension.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncSetCounter}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncCounter}{counter},

-\cargdecl{XSyncValue}{value}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncSetCounter} sets counter to value.  

-It returns \cconst{False} if dpy does not support the SYNC extension;

-otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncChangeCounter}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncCounter}{counter},

-\cargdecl{XSyncValue}{value}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncChangeCounter} adds value to counter.

-It returns \cconst{False} if dpy does not support the SYNC extension;

-otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncDestroyCounter}

-\cargdecl{Display *}{dpy}, 

-\cargdecl{XSyncCounter}{counter}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncDestroyCounter} destroys counter. 

-It returns \cconst{False} if dpy does not

-support the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncQueryCounter}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncCounter}{counter},

-\cargdecl{XSyncValue *}{value\_return}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncQueryCounter} sets *value\_return to the current value of

-counter.  It returns \cconst{False} if there was an error during

-communication with the server or if dpy does not support

-the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncAwait}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncWaitCondition *}{wait\_list},

-\cargdecl{int}{n\_conditions}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncAwait} awaits on the conditions in wait\_list.

-The n\_conditions is the number of wait conditions in

-wait\_list.  It returns \cconst{False} if dpy does not

-support the SYNC extension; otherwise, it returns \cconst{True}.

-The await is processed asynchronously by the server;

-this function always returns immediately

-after issuing the request.

-

-\ctypename{XSyncWaitCondition} has the following fields:

-

-\begin{tabular}{lll}

-XSyncCounter & trigger.counter; & /* counter to trigger on */ \\

-XSyncValueType & trigger.value\_type; & /* absolute/relative */ \\

-XSyncValue & trigger.wait\_value; & /* value to compare counter to */ \\

-XSyncTestType & trigger.test\_type;	& /* pos/neg comparison/transtion */ \\

-XSyncValue & event\_threshold; & /* send event if past threshold */ \\

-\end{tabular}

-

-\ctypename{XSyncValueType} can be either \cconst{XSyncAbsolute} or \cconst{XSyncRelative}.

-

-\ctypename{XSyncTestType} can be one of \cconst{XSyncPositiveTransition},

-\cconst{XSyncNegativeTransition}, \cconst{XSyncPositiveComparison}, or

-\cconst{XSyncNegativeComparison}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{XSyncAlarm}{XSyncCreateAlarm}

-\cargdecl{Display *}{dpy},

-\cargdecl{unsigned long}{values\_mask},

-\cargdecl{XSyncAlarmAttributes *}{values}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncCreateAlarm} creates an alarm and returns the alarm ID.

-It returns \cconst{None} if the display does not support the SYNC extension. 

-The values\_mask and values specify the alarm attributes.

-

-\ctypename{XSyncAlarmAttributes} has the following fields.  The attribute\_mask

-column specifies the symbol that the caller should OR into

-values\_mask to indicate that the value for the corresponding

-attribute was actually supplied.  Default values are used for all

-attributes that do not have their attribute\_mask OR'ed into 

-values\_mask.

-See the protocol

-description for \request{CreateAlarm} for the defaults.

-

-\begin{tabular}{lll}

-type & field name & attribute\_mask \\

-XSyncCounter & trigger.counter; & \cconst{XSyncCACounter} \\

-XSyncValueType & trigger.value\_type; & \cconst{XSyncCAValueType} \\

-XSyncValue & trigger.wait\_value; & \cconst{XSyncCAValue} \\

-XSyncTestType & trigger.test\_type; & \cconst{XSyncCATestType} \\

-XSyncValue & delta;	& \cconst{XSyncCADelta} \\

-Bool & events; & \cconst{XSyncCAEvents} \\

-XSyncAlarmState & state; & client cannot set this \\

-\end{tabular}

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncDestroyAlarm}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncAlarm}{alarm}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncDestroyAlarm} destroys alarm. 

-It returns \cconst{False} if dpy does not

-support the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncQueryAlarm}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncAlarm}{alarm},

-\cargdecl{XSyncAlarmAttributes *}{values\_return}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncQueryAlarm} sets *values\_return to the alarm's

-attributes.  It returns \cconst{False} if there was an error 

-during communication with the server or if dpy does not support 

-the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncChangeAlarm}

-\cargdecl{Display *}{dpy},

-\cargdecl{XSyncAlarm}{alarm},

-\cargdecl{unsigned long}{values\_mask},

-\cargdecl{XSyncAlarmAttributes *}{values}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncChangeAlarm} changes alarm's attributes.

-The attributes to change are specified as in \cfunctionname{XSyncCreateAlarm}.

-It returns \cconst{False} if dpy does not support the SYNC extension; 

-otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncSetPriority}

-\cargdecl{Display *}{dpy},

-\cargdecl{XID}{client\_resource\_id},

-\cargdecl{int}{priority}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncSetPriority} sets the priority of the client owning 

-client\_resource\_id to priority.  

-If client\_resource\_id is \cconst{None},

-it sets the caller's priority.  It returns \cconst{False} if dpy

-does not support the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-

-% start marker

-\cstartfunction{Status}{XSyncGetPriority}

-\cargdecl{Display *}{dpy},

-\cargdecl{XID}{client\_resource\_id},

-\cargdecl{int *}{return\_priority}

-\cendfunctiondecl

-% end marker

-

-\cfunctionname{XSyncGetPriority} sets *return\_priority to the priority

-of the client owning client\_resource\_id. 

-If client\_resource\_id is

-\cconst{None}, it sets *return\_priority to the caller's priority.

-It returns \cconst{False} if there was an error

-during communication with the server or if dpy does not

-support the SYNC extension; otherwise, it returns \cconst{True}.

-\cendfuncdescription

-

-\subsection{C Macros/Functions}

-

-The following procedures manipulate 64-bit values.  They are defined

-both as macros and as functions.  By default, the macro form is used.

-To use the function form, \#undef the macro name to uncover the

-function.

-

-

-% start marker

-\cstartmacro{void}{XSyncIntToValue}

-\cargdecl{XSyncValue}{*pv},

-\cargdecl{int}{i}

-\cendmacrodecl

-% end marker

-

-Converts i to an \ctypename{XSyncValue} and stores it in

-*pv.  Performs sign extension (*pv will have the

-same sign as i.)

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{void}{XSyncIntsToValue}

-\cargdecl{XSyncValue}{*pv},

-\cargdecl{unsigned int}{low},

-\cargdecl{int}{high}

-\cendmacrodecl

-% end marker

-

-Stores low in the low 32 bits of *pv and 

-high in the high 32 bits of *pv.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueGreaterThan}

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if a is greater than b,

-else returns \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueLessThan}

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if a is less than b,

-else returns \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueGreaterOrEqual}

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if a is greater than or equal to b,

-else returns \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueLessOrEqual}

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if a is less than or equal to b.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueEqual}

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if a is equal to b,

-else returns \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueIsNegative}

-\cargdecl{XSyncValue}{v}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if v is negative, else returns

-\cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueIsZero}

-\cargdecl{XSyncValue}{v}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if v is zero,

-else returns \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{Bool}{XSyncValueIsPositive}

-\cargdecl{XSyncValue}{v}

-\cendmacrodecl

-% end marker

-

-Returns \cconst{True} if v is positive, else returns

-\cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{unsigned int}{XSyncValueLow32}

-\cargdecl{XSyncValue}{v}

-\cendmacrodecl

-% end marker

-

-Returns the low 32 bits of v.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{int}{XSyncValueHigh32}

-\cargdecl{XSyncValue}{v}

-\cendmacrodecl

-% end marker

-

-Returns the high 32 bits of v.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{void}{XSyncValueAdd}

-\cargdecl{XSyncValue *}{presult},

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b},

-\cargdecl{Bool *}{poverflow}

-\cendmacrodecl

-% end marker

-

-Adds a to b and stores the result in *presult.

-If the result could not fit in 64 bits, *poverflow is set to

-\cconst{True}, else it is set to \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{void}{XSyncValueSubtract}

-\cargdecl{XSyncValue *}{presult},

-\cargdecl{XSyncValue}{a},

-\cargdecl{XSyncValue}{b},

-\cargdecl{Bool *}{poverflow}

-\cendmacrodecl

-% end marker

-

-Subtracts b from a and stores the result in

-*presult.

-If the result could not fit in 64 bits, overflow is set to

-\cconst{True}, else it is set to \cconst{False}.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{void}{XSyncMaxValue}

-\cargdecl{XSyncValue *}{pv}

-\cendmacrodecl

-% end marker

-

-Sets *pv to the maximum value expressible in 64 bits.

-\cendmacrodescription

-

-

-% start marker

-\cstartmacro{void}{XSyncMinValue}

-\cargdecl{XSyncValue *}{pv}

-\cendmacrodecl

-% end marker

-

-Sets *pv to the minimum value expressible in 64 bits.

-\cendmacrodescription

-

-\subsection{Events}

-

-Let \cargname{event\_base} be the value \cargname{event\_base\_return}

-as defined in the function \cfunctionname{XSyncQueryExtension}.

-

-An \ctypename{XSyncCounterNotifyEvent}'s type field has the value

-\cargname{event\_base} + \cconst{XSyncCounterNotify}.  The fields of

-this structure are:

-

-\begin{tabular}{lll}

-int & type;	& /* event base + \cconst{XSyncCounterNotify} */ \\

-unsigned long & serial; & /* number of last request processed by server */ \\

-Bool & send\_event;& /* true if this came from a SendEvent request */ \\

-Display * & display; & /* Display the event was read from */\\

-XSyncCounter & counter;	& /* counter involved in await */\\

-XSyncValue & wait\_value; & /* value being waited for */\\

-XSyncValue & counter\_value; & /* counter value when this event was sent */\\

-Time & time; & /* milliseconds */\\

-int & count; & /* how many more events to come */\\

-Bool & destroyed; & /* True if counter was destroyed */\\

-\end{tabular}

-

-An \ctypename{XSyncAlarmNotifyEvent}'s type field has the value

-\cargname{event\_base} + \cconst{XSyncAlarmNotify}.  The fields of this

-structure are:

-

-\begin{tabular}{lll}

-int & type;&	/* event base + \cconst{XSyncAlarmNotify} */\\

-unsigned long & serial;&/* number of last request processed by server */\\

-Bool & send\_event;& /* true if this came from a SendEvent request */\\

-Display * & display;&	/* Display the event was read from */\\

-XSyncAlarm & alarm;&	/* alarm that triggered */\\

-XSyncValue & counter\_value;&/* value that triggered the alarm */\\

-XSyncValue & alarm\_value;&	/* test  value of trigger in alarm */\\

-Time & time;&	/* milliseconds */\\

-XSyncAlarmState & state;&	/* new state of alarm */\\

-\end{tabular}

-

-\subsection{Errors}

-

-Let \cargname{error\_base} be the value \cargname{error\_base\_return}

-as defined in the function \cfunctionname{XSyncQueryExtension}.

-

-An \ctypename{XSyncAlarmError}'s error\_code field has the value

-\cargname{error\_base} + \cconst{XSyncBadAlarm}.  The fields of

-this structure are:

-

-\begin{tabular}{lll}

-int & type;	\\

-Display * & display;& /* Display the event was read from */\\

-XSyncAlarm &  alarm;& /* resource id */\\

-unsigned long & serial;& /* serial number of failed request */\\

-unsigned char & error\_code;&/* error base + XSyncBadAlarm */\\

-unsigned char & request\_code;&/* Major op-code of failed request */\\

-unsigned char & minor\_code;&/* Minor op-code of failed request */\\

-\end{tabular}

-

-An \ctypename{XSyncCounterError}'s error\_code field has the value

-\cargname{error\_base} + \cconst{XSyncBadCounter}.  The fields of

-this structure are:

-

-\begin{tabular}{lll}

-int &type;\\

-Display * & display;&	/* Display the event was read from */\\

-XSyncCounter & counter;&	/* resource id */\\

-unsigned long & serial;&	/* serial number of failed request */\\

-unsigned char & error\_code;&/* error base + XSyncBadCounter */\\

-unsigned char & request\_code;&/* Major op-code of failed request */\\

-unsigned char & minor\_code;& /* Minor op-code of failed request */\\

-\end{tabular}

-

-\end{document}