Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 1214 insertions, 0 deletions

diff --git a/libXfont/src/Speedo/set_trns.c b/libXfont/src/Speedo/set_trns.c
new file mode 100644
index 000000000..35c2e33cf
--- /dev/null
+++ b/libXfont/src/Speedo/set_trns.c
@@ -0,0 +1,1214 @@
+/* $Xorg: set_trns.c,v 1.3 2000/08/17 19:46:27 cpqbld Exp $ */
+
+/*
+
+Copyright 1989-1991, Bitstream Inc., Cambridge, MA.
+You are hereby granted permission under all Bitstream propriety rights to
+use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo
+software and the Bitstream Charter outline font for any purpose and without
+restrictions; provided, that this notice is left intact on all copies of such
+software or font and that Bitstream's trademark is acknowledged as shown below
+on all unmodified copies of such font.
+
+BITSTREAM CHARTER is a registered trademark of Bitstream Inc.
+
+
+BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE.  BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT
+DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER
+INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED
+WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT.
+
+*/
+/* $XFree86: xc/lib/font/Speedo/set_trns.c,v 1.5tsi Exp $ */
+
+
+
+/*************************** S E T _ T R N S . C *****************************
+ *                                                                           *
+ * This module is called from do_char.c to set up the intelligent            *
+ * transformation for one character (or sub-character of a composite         *
+ * character.
+ *                                                                           *
+ ****************************************************************************/
+
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "spdo_prv.h"               /* General definitions for Speedo   */
+
+#define   DEBUG      0
+
+#if DEBUG
+#include <stdio.h>
+#define SHOW(X) printf("X = %d\n", X)
+#else
+#define SHOW(X)
+#endif
+/***** LOCAL MACROS     *****/
+
+#define SQUEEZE_X_ORU(A,B,C) ((((fix31)A * (fix31)B) + C) >> 16)
+#define ABS(A) ((A < 0)? -A:A) /* absolute value */
+#define IMPORT_FACTOR    \
+	shift = 16;\
+	while (*x_factor > (0x7fffffffL / (isw_scale >> (16 - shift))))\
+		shift--;\
+    	*x_factor = (*x_factor * (isw_scale>>(16-shift))) >> shift;
+
+/***** GLOBAL VARIABLES *****/
+
+/*****  GLOBAL FUNCTIONS *****/
+
+/***** EXTERNAL VARIABLES *****/
+
+/***** EXTERNAL FUNCTIONS *****/
+
+/***** STATIC VARIABLES *****/
+
+/***** STATIC FUNCTIONS *****/
+
+static void sp_constr_update(PROTO_DECL1);
+static ufix8 FONTFAR *sp_setup_pix_table(PROTO_DECL2 ufix8 FONTFAR *pointer,boolean short_form,fix15 no_X_ctrl_zones,fix15 no_Y_ctrl_zones);
+static ufix8 FONTFAR *sp_setup_int_table(PROTO_DECL2 ufix8 FONTFAR *pointer,fix15 no_X_int_zones,fix15 no_Y_int_zones);
+
+
+FUNCTION void init_tcb()
+GDECL
+/*
+ * Called by sp_make_char() and make_comp_char() to initialize the current
+ * transformation control block to the top level transformation.
+ */
+{
+sp_globals.tcb = sp_globals.tcb0;
+}
+
+FUNCTION void scale_tcb(
+GDECL
+tcb_t GLOBALFAR *ptcb,    /* Transformation control block */
+fix15  x_pos,   /* X position (outline res units) */
+fix15  y_pos,   /* Y position (outline res units) */
+fix15  x_scale, /* X scale factor * ONE_SCALE */
+fix15  y_scale) /* Y scale factor * ONE_SCALE */
+/*
+ * Called by make_comp_char() to apply position and scale for each of the
+ * components of a compound character.
+ */
+{     
+fix15 xx_mult = ptcb->xxmult;
+fix15 xy_mult = ptcb->xymult;
+fix31 x_offset = ptcb->xoffset;
+fix15 yx_mult = ptcb->yxmult;
+fix15 yy_mult = ptcb->yymult;
+fix31 y_offset = ptcb->yoffset;
+
+ptcb->xxmult = TRANS(xx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT);
+ptcb->xymult = TRANS(xy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT);
+ptcb->xoffset = MULT16(xx_mult, x_pos) + MULT16(xy_mult, y_pos) + x_offset;
+ptcb->yxmult = TRANS(yx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT);
+ptcb->yymult = TRANS(yy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT);
+ptcb->yoffset = MULT16(yx_mult, x_pos) + MULT16(yy_mult, y_pos) + y_offset;
+
+type_tcb(ptcb); /* Reclassify transformation types */
+}
+
+
+static FUNCTION ufix8 FONTFAR *read_oru_table(
+GDECL
+ufix8 FONTFAR *pointer)   /* Pointer to first byte in controlled coord table */
+/*
+ * Called by plaid_tcb() to read the controlled coordinate table from the
+ * character data in the font. 
+ * Updates the pointer to the byte following the controlled coordinate
+ * data.
+ */
+{
+fix15    i, j, k, n;
+boolean  zero_not_in;
+boolean  zero_added;
+fix15    oru;
+
+fix15    pos;
+
+i = 0;
+n = sp_globals.no_X_orus;
+pos = sp_globals.tcb.xpos;
+for (j = 0; ; j++)
+    {
+    zero_not_in = TRUE;
+    zero_added = FALSE;
+    for (k = 0; k < n; k++)
+        {
+        oru = NEXT_WORD(pointer);
+        if (zero_not_in && (oru >= 0)) /* First positive oru value? */
+            {
+            sp_plaid.pix[i] = pos;        /* Insert position in pix array */
+            if (oru != 0)        /* Zero oru value omitted? */
+                {
+                sp_plaid.orus[i++] = 0;   /* Insert zero value in oru array */
+                zero_added = TRUE; /* Remember to increment size of array */
+                }
+            zero_not_in = FALSE; /* Inhibit further testing for zero ins */
+            }
+        sp_plaid.orus[i++] = oru;         /* Add specified oru value to array */
+        }
+    if (zero_not_in)             /* All specified oru values negative? */
+        {
+        sp_plaid.pix[i] = pos;            /* Insert position in pix array */
+        sp_plaid.orus[i++] = 0;           /* Add zero oru value */
+        zero_added = TRUE;       /* Remember to increment size of array */
+        }
+    if (j)                       /* Both X and Y orus read? */
+        break;
+    if (zero_added)                                 
+        sp_globals.no_X_orus++;             /* Increment X array size */
+    n = sp_globals.no_Y_orus;               /* Prepare to read Y oru values */
+    pos = sp_globals.tcb.ypos;
+    }
+if (zero_added)                  /* Zero Y oru value added to array? */
+    sp_globals.no_Y_orus++;                 /* Increment Y array size */
+
+#if DEBUG
+printf("\nX ORUS\n");
+n = sp_globals.no_X_orus;
+for (i = 0; i < n; i++)
+    {
+    printf("%2d %4d\n", i, sp_plaid.orus[i]);
+    }
+printf("\nY ORUS\n");
+n = sp_globals.no_Y_orus;
+for (i = 0; i < n; i++)
+    {
+    printf("%2d %4d\n", i, sp_plaid.orus[i + sp_globals.no_X_orus]);
+    }
+#endif
+
+return pointer;             /* Update pointer */
+}
+
+FUNCTION ufix8 FONTFAR *plaid_tcb(
+GDECL
+ufix8 FONTFAR *pointer,  /* Pointer to next byte in char data */
+ufix8    format)    /* Character format byte */
+/* 
+ * Called by make_simp_char() and make_comp_char() to set up the controlled
+ * coordinate table and process all intelligent scaling rules embedded
+ * in the character data.
+ * Updates pointer to first byte after plaid data.
+ * This is used only if intelligent scaling is enabled in the
+ * configuration definitions.
+ */
+{
+fix15 no_X_ctrl_zones;
+fix15 no_Y_ctrl_zones;
+fix15 no_X_int_zones;
+fix15 no_Y_int_zones;
+
+#if INCL_PLAID_OUT         /* Plaid data monitoring included? */
+begin_plaid_data();
+#endif
+
+sp_constr_update();           /* Update constraint table if required */
+
+sp_globals.no_X_orus = (format & BIT2)?  
+    (fix15)NEXT_BYTE(pointer):
+    0;
+sp_globals.no_Y_orus = (format & BIT3)?
+    (fix15)NEXT_BYTE(pointer):
+    0;
+pointer = read_oru_table(pointer);  /* Updates no_X/Y/orus to include zero values */
+sp_globals.Y_edge_org = sp_globals.no_X_orus;                                                  
+if (sp_globals.no_X_orus > 1)         /* 2 or more controlled X coordinates? */
+    sp_globals.tcb.xmode = sp_globals.tcb.xtype; /* Enable intelligent scaling in X */
+
+if (sp_globals.no_Y_orus > 1)         /* 2 or more controlled Y coordinates? */
+    sp_globals.tcb.ymode = sp_globals.tcb.ytype; /* Enable intelligent scaling in Y */
+
+no_X_ctrl_zones = sp_globals.no_X_orus - 1;
+no_Y_ctrl_zones = sp_globals.no_Y_orus - 1;
+pointer = sp_setup_pix_table(pointer, (boolean)(format & BIT4), 
+    no_X_ctrl_zones, no_Y_ctrl_zones);
+
+no_X_int_zones = (format & BIT6)?
+    (fix15)NEXT_BYTE(pointer):
+    0;
+no_Y_int_zones = (format & BIT7)?
+    (fix15)NEXT_BYTE(pointer):
+    0;
+sp_globals.Y_int_org = no_X_int_zones;
+pointer = sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones);
+
+#if INCL_PLAID_OUT         /* Plaid data monitoring included? */
+end_plaid_data();
+#endif
+
+return pointer;
+}
+
+FUNCTION static void sp_constr_update()
+GDECL
+/*
+ * Called by plaid_tcb() to update the constraint table for the current
+ * transformation.
+ * This is always carried out whenever a character is generated following
+ * a change of font or scale factor or after initialization.     
+ */
+{
+fix31    ppo;
+fix15    xppo;
+fix15    yppo;
+ufix8 FONTFAR  *pointer;
+fix15    no_X_constr;
+fix15    no_Y_constr;
+fix15    i, j, k, l, n;
+fix15    ppm;
+ufix8    format;
+ufix8    format1;
+fix15    limit;
+ufix16   constr_org;
+fix15    constr_nr;
+fix15    size;
+fix31    off;
+fix15    min;     
+fix15    orus;
+fix15    pix; 
+ufix16   tmpufix16;  /* in extended mode, macro uses secnd term */
+
+if (sp_globals.constr.data_valid &&         /* Constr table already done and ... */
+    (sp_globals.tcb.xppo == sp_globals.constr.xppo) && /* ... X pix per oru unchanged and ... */
+    (sp_globals.tcb.yppo == sp_globals.constr.yppo))   /* ... Y pix per oru unchanged? */
+    {
+    return;                      /* No need to update constraint table */
+    }
+
+sp_globals.constr.xppo = xppo = sp_globals.tcb.xppo;   /* Update X pixels per oru indicator */
+sp_globals.constr.yppo = yppo = sp_globals.tcb.yppo;   /* Update Y pixels per oru indicator */
+sp_globals.constr.data_valid = TRUE;        /* Mark constraint table valid */
+
+pointer = sp_globals.constr.org;            /* Point to first byte of constraint data */
+no_X_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of X constraints */
+no_Y_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of Y constraints */
+
+i = 0;
+constr_org = 0;
+n = no_X_constr;
+ppo = xppo;
+for (j = 0; ; j++)
+    {
+    sp_globals.c_act[i] = FALSE;            /* Flag constraint 0 not active */
+    sp_globals.c_pix[i++] = 0;              /* Constraint 0 implies no minimum */
+    sp_globals.c_act[i] = FALSE;            /* Flag constraint 1 not active */
+    sp_globals.c_pix[i++] = sp_globals.onepix; /* Constraint 1 implies min 1 pixel*/
+    ppm = (ppo * (fix31)sp_globals.orus_per_em) >> sp_globals.multshift;
+    for (k = 0; k < n; k++)
+        {
+        format = NEXT_BYTE(pointer);        /* Read format byte */
+        limit = (fix15)NEXT_BYTE(pointer);  /* Read limit field */
+        sp_globals.c_act[i] = 
+            ((ppm < limit) || (limit == 255)) &&
+            sp_globals.constr.active;
+        if (sp_globals.c_act[i])            /* Constraint active? */
+            {
+            if ((format & BIT1) &&          /* Constraint specified and ... */
+                (constr_nr = constr_org +
+                    ((format & BIT0)?       /* Read unsigned constraint value */
+                    NEXT_WORD(pointer): 
+                    (fix15)NEXT_BYTE(pointer)),
+                 sp_globals.c_act[constr_nr])) /* ... and specified constraint active? */ 
+                {
+                pix = sp_globals.c_pix[constr_nr]; /* Use constrained pixel value */
+                format1 = format;
+                for (l = 2; l > 0; l--)     /* Skip 2 arguments */
+                    {
+                    format1 >>= 2;
+                    if ((size = format1 & 0x03))
+                        pointer += size - 1;
+                    }
+                }
+            else                 /* Constraint absent or inactive? */
+                {
+                orus = (format & BIT2)? /* Read unsigned oru value */
+                    NEXT_WORD(pointer):
+                    (fix15)NEXT_BYTE(pointer);
+
+                if (format & BIT5) /* Specified offset value? */
+                    {
+                    off = (fix31)((format & BIT4)? /* Read offset value */
+                        NEXT_WORD(pointer):
+                        (fix7)NEXT_BYTE(pointer));
+                    off = (off << (sp_globals.multshift - 6)) + sp_globals.multrnd;
+                    }
+                else             /* Unspecified (zero) offset value? */
+                    {
+                    off = sp_globals.multrnd;
+                    }
+
+                pix = (fix15)(((fix31)orus * ppo + off) / (1 << sp_globals.mpshift)) & sp_globals.pixfix;
+                }
+            }
+        else                     /* Constraint inactive? */
+            {
+            format1 = format;
+            for (l = 3; l > 0; l--) /* Skip over 3 arguments */
+                {
+                if ((size = format1 & 0x03))
+                    pointer += size - 1;
+                format1 >>= 2;
+                }
+            pix = 0;
+            }
+
+        if (format & 0xc0) /* Specified minimum value? */
+            {
+            min = (format & BIT7)? /* Read unsigned minimum value */
+                (fix15)NEXT_BYTE(pointer) << sp_globals.pixshift:
+                sp_globals.onepix;
+            }
+        else             /* Unspecified (zero) minimum value? */
+            {
+            min = 0;
+            }
+
+        sp_globals.c_pix[i] = (pix < min)? min: pix;
+        i++;
+        }
+    if (j) break;                /* Finished if second time around loop */
+    constr_org = sp_globals.Y_constr_org = i;
+    n = no_Y_constr;
+    ppo = yppo;
+    }
+
+#if DEBUG
+printf("\nCONSTRAINT TABLE\n");
+n = no_X_constr + 2;
+for (i = 0; i < n; i++)
+    {
+    printf("%3d   ", i);
+    if (sp_globals.c_act[i])
+        {
+        printf("T ");
+        }
+    else
+        {
+        printf("F ");
+        }
+    printf("%5.1f\n", ((real)sp_globals.c_pix[i] / (real)sp_globals.onepix));
+    }
+printf("--------------\n");
+n = no_Y_constr + 2;
+for (i = 0; i < n; i++)
+    {
+    j = i + sp_globals.Y_constr_org;
+    printf("%3d   ", i);
+    if (sp_globals.c_act[j])
+        {
+        printf("T ");
+        }
+    else
+        {
+        printf("F ");
+        }
+    printf("%5.1f\n", ((real)sp_globals.c_pix[j] / (real)sp_globals.onepix));
+    }
+#endif
+
+}
+
+#if INCL_SQUEEZING || INCL_ISW
+FUNCTION static void calculate_x_pix(
+GDECL
+ufix8 start_edge, ufix8 end_edge,
+ufix16 constr_nr,
+fix31 x_scale,
+fix31 x_offset,
+fix31 ppo,
+fix15    setwidth_pix)
+/*
+ * Called by sp_setup_pix_table() when X squeezing is necessary
+ * to insert the correct edge in the global pix array
+ */
+{
+fix15 zone_pix;
+fix15 start_oru, end_oru;
+
+/* compute scaled oru coordinates */
+start_oru= (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[start_edge], x_scale, x_offset));
+end_oru   = (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[end_edge], x_scale, x_offset));
+
+if (!sp_globals.c_act[constr_nr]) /* constraint inactive */
+    {
+    /* calculate zone width */
+    zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) /
+	(1<<sp_globals.mpshift)) + sp_globals.pixrnd) & sp_globals.pixfix;
+    /* check for overflow */
+    if (((end_oru-start_oru) > 0) && (zone_pix < 0))
+	zone_pix = 0x7ffff;
+    /* check for minimum */
+    if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
+    	goto Lx;
+    }
+/* use the zone size from the constr table - scale it */
+zone_pix = (fix15)(((SQUEEZE_MULT(x_scale,sp_globals.c_pix[constr_nr]))
+            + sp_globals.pixrnd) & sp_globals.pixfix);
+
+/* look for overflow */
+if ((sp_globals.c_pix[constr_nr] > 0) && (zone_pix < 0))
+	zone_pix = 0x7fff;
+
+if (start_edge > end_edge)
+    {
+    zone_pix = -zone_pix;
+    }
+Lx:
+/* assign pixel value to global pix array */
+sp_plaid.pix[end_edge]=sp_plaid.pix[start_edge] + zone_pix;
+
+/* check for overflow */
+if (((sp_plaid.pix[start_edge] >0) && (zone_pix >0)) &&
+    (sp_plaid.pix[end_edge] < 0))
+	sp_plaid.pix[end_edge] = 0x7fff; /* set it to the max */
+
+/* be sure to be in the setwidth !*/
+#if INCL_ISW
+if (!sp_globals.import_setwidth_act) /* only check left edge if not isw only */
+#endif
+if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && (sp_plaid.pix[end_edge] < 0))
+    sp_plaid.pix[end_edge] = 0;
+if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && 
+    (sp_plaid.pix[end_edge] > setwidth_pix))
+    sp_plaid.pix[end_edge] = setwidth_pix;
+
+}
+#endif
+
+#if INCL_SQUEEZING
+FUNCTION static void calculate_y_pix(
+GDECL
+ufix8 start_edge, ufix8 end_edge,
+ufix16 constr_nr,
+fix31 top_scale, fix31 bottom_scale,
+fix31 ppo,
+fix15 em_top_pix, fix15 em_bot_pix)
+
+/*
+ * Called by sp_setup_pix_table() when Y squeezing is necessary
+ * to insert the correct edge in the global pix array
+ */
+{
+fix15 zone_pix;
+fix15 start_oru, end_oru;
+fix31 zone_width, above_base, below_base;
+
+/* check whether edge is above or below the baseline                */
+/* and apply appropriate scale factor to get scaled oru coordinates */
+if (sp_plaid.orus[start_edge] < 0)
+    start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], bottom_scale));
+else
+    start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], top_scale));
+
+if (sp_plaid.orus[end_edge] < 0)
+    end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], bottom_scale));
+else
+    end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], top_scale));
+
+if (!sp_globals.c_act[constr_nr])   /* Constraint inactive? */
+   {
+   /* calculate zone width */
+    zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo)
+		>> sp_globals.mpshift)+ sp_globals.pixrnd) & sp_globals.pixfix;
+   /* check minimum */
+    if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
+                    goto Ly;
+    }
+
+/* Use zone size from constr table */
+if ((end_oru >= 0) && (start_oru >=0))
+    /* all above baseline */
+    zone_pix = (fix15)(SQUEEZE_MULT(top_scale, sp_globals.c_pix[constr_nr]));
+else if ((end_oru <= 0) && (start_oru <=0))
+    /* all below baseline */
+    zone_pix = (fix15)(SQUEEZE_MULT(bottom_scale, sp_globals.c_pix[constr_nr]));
+else
+    {
+    /* mixture */
+    if (start_oru > 0)
+        {
+	zone_width = start_oru - end_oru;
+        /* get % above baseline in 16.16 fixed point */
+        above_base = (((fix31)start_oru) << 16) /
+		     ((fix31)zone_width) ;
+        /* get % below baseline in 16.16 fixed point */
+        below_base = (((fix31)-end_oru) << 16) /
+		     ((fix31)zone_width) ;
+	}
+    else
+        {
+        zone_width = end_oru - start_oru;
+        /* get % above baseline in 16.16 fixed point */
+        above_base = (((fix31)-start_oru) << 16) /
+		     ((fix31)zone_width) ;
+        /* get % below baseline in 16.16 fixed point */
+        below_base = (((fix31)end_oru) << 16) /
+		     ((fix31)zone_width) ;
+       }
+    /* % above baseline * total zone * top_scale +  */
+    /* % below baseline * total zone * bottom_scale */
+    zone_pix = ((((above_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) *
+                top_scale) +
+	       (((below_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) *
+		bottom_scale)) >> 16;
+    }
+
+/* make this zone pix fall on a pixel boundary */
+zone_pix = (zone_pix + sp_globals.pixrnd) & sp_globals.pixfix;
+
+/* if minimum is in effect make the zone one pixel */
+if ((sp_globals.c_pix[constr_nr] != 0) && (zone_pix < sp_globals.onepix)) 
+    zone_pix = sp_globals.onepix; 
+    
+if (start_edge > end_edge) 
+       {
+        zone_pix = -zone_pix; /* Use negatve zone size */
+        }
+Ly:
+/* assign global pix value */
+sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */
+
+/* make sure it is in the EM !*/
+if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && 
+    (sp_plaid.pix[end_edge] > em_top_pix))
+    sp_plaid.pix[end_edge] = em_top_pix;
+if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) &&
+    (sp_plaid.pix[end_edge] < em_bot_pix))
+    sp_plaid.pix[end_edge] = em_bot_pix;
+}
+
+FUNCTION boolean calculate_x_scale(x_factor, x_offset, no_X_ctrl_zones)
+GDECL
+fix31 *x_factor,
+fix31 *x_offset,
+fix15   no_X_ctrl_zones) /* Number of X control zones */
+/*
+ * Called by sp_setup_pix_table() when squeezing is included
+ * to determine whether X scaling is necessary.  If it is, the
+ * scale factor and offset are computed.  This function returns
+ * a boolean value TRUE = X squeezind is necessary, FALSE = no
+ * X squeezing is necessary.
+ */
+{
+boolean squeeze_left, squeeze_right;
+boolean out_on_right, out_on_left;
+fix15 bbox_width,set_width;
+fix15 bbox_xmin, bbox_xmax;
+fix15 x_offset_pix;
+fix15 i;
+#if INCL_ISW
+fix31 isw_scale;
+fix15 shift;
+#endif
+
+
+/* set up some flags and common calculations */
+squeeze_left = (sp_globals.pspecs->flags & SQUEEZE_LEFT)? TRUE:FALSE;
+squeeze_right = (sp_globals.pspecs->flags & SQUEEZE_RIGHT)? TRUE:FALSE;
+bbox_xmin = sp_globals.bbox_xmin_orus;
+bbox_xmax = sp_globals.bbox_xmax_orus;
+set_width = sp_globals.setwidth_orus;
+
+if (bbox_xmax > set_width)
+    out_on_right = TRUE;
+else
+    out_on_right = FALSE;
+if (bbox_xmin < 0)
+    out_on_left = TRUE;
+else
+    out_on_left = FALSE;
+bbox_width =bbox_xmax - bbox_xmin;
+
+/*
+ * don't need X squeezing if:
+ *     - X squeezing not enabled
+ *     - bbox doesn't violate on left or right
+ *     - left squeezing only is enabled and char isn't out on left
+ *     - right squeezing only is enabled and char isn't out on right
+ */
+
+if ((!squeeze_left && !squeeze_right) || 
+   (!out_on_right && !out_on_left) ||     
+   (squeeze_left && !squeeze_right && !out_on_left) ||
+   (squeeze_right && !squeeze_left && !out_on_right))
+    return FALSE;
+
+#if INCL_ISW
+if (sp_globals.import_setwidth_act)
+    {
+    /* if both isw and squeezing is going on - let the imported */
+    /* setwidth factor be factored in with the squeeze          */
+    isw_scale = compute_isw_scale();
+    /*sp_globals.setwidth_orus = sp_globals.imported_width;*/
+    }
+else
+    isw_scale = 0x10000L; /* 1 in 16.16 notation */
+#endif
+
+/* squeezing on left and right ?  */
+if (squeeze_left && squeeze_right)
+    {
+    /* calculate scale factor */
+    if (bbox_width < set_width)
+	*x_factor = 0x10000L; /* 1 in 16.16 notation */
+    else
+	*x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
+#if INCL_ISW
+    IMPORT_FACTOR
+#endif
+    /* calculate offset */
+    if (out_on_left) /* fall out on left ? */
+	*x_offset = -(fix31)*x_factor * (fix31)bbox_xmin;
+    /* fall out on right and I am shifting only ? */
+    else if (out_on_right && (*x_factor == 0x10000L))
+        *x_offset = -(fix31)*x_factor * (fix31)(bbox_xmax - set_width);
+    else
+	*x_offset = 0x0L; /* 0 in 16.16 notation */
+    }
+/* squeezing on left only and violates left */
+else if (squeeze_left)
+    {
+    if (bbox_width < set_width) /* will it fit if I shift it ? */
+	*x_factor = 0x10000L; /* 1 in 16.16 notation */
+    else if (out_on_right)
+	*x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
+    else
+	*x_factor = ((fix31)set_width<<16)/
+		    (fix31)(bbox_width - (bbox_xmax-set_width));
+#if INCL_ISW
+    IMPORT_FACTOR
+#endif
+    *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin;
+    }
+
+/* I must be squeezing on right, and violates right */
+else 
+    {
+    if (bbox_width < set_width) /* will it fit if I shift it ? */
+	{  /* just shift it left - it will fit in the bbox */
+        *x_factor = 0x10000L; /* 1 in 16.16 notation */
+#if INCL_ISW
+    IMPORT_FACTOR
+#endif
+        *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin;
+	}
+    else if (out_on_left)
+	{
+        *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
+#if INCL_ISW
+    IMPORT_FACTOR
+#endif
+	*x_offset = 0x0L; /* 0 in 16.16 notation */
+	}
+    else
+	{
+        *x_factor = ((fix31)set_width<<16)/(fix31)bbox_xmax;
+#if INCL_ISW
+    IMPORT_FACTOR
+#endif
+	*x_offset = 0x0L; /* 0 in 16.16 notation */
+ 	}
+    }
+
+x_offset_pix = (fix15)(((*x_offset >> 16) * sp_globals.tcb0.xppo)
+		/ (1<<sp_globals.mpshift)); 
+
+if ((x_offset_pix >0) && (x_offset_pix < sp_globals.onepix))
+    x_offset_pix = sp_globals.onepix; 
+
+/* look for the first non-negative oru value, scale and add the offset    */
+/* to the corresponding pixel value - note that the pixel value           */
+/* is set in read_oru_table.                                              */
+
+/* look at all the X edges */
+for (i=0; i < (no_X_ctrl_zones+1); i++)
+    if (sp_plaid.orus[i] >= 0)
+        {
+        sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *x_factor) 
+		  +sp_globals.pixrnd + x_offset_pix) & sp_globals.pixfix;
+        break;
+        }
+
+return TRUE;
+}
+
+FUNCTION boolean calculate_y_scale(
+GDECL
+fix31   *top_scale, fix31 *bottom_scale,
+fix15  first_Y_zone,
+fix15  no_Y_ctrl_zones)
+/*
+ * Called by sp_setup_pix_table() when squeezing is included
+ * to determine whether Y scaling is necessary.  If it is, 
+ * two scale factors are computed, one for above the baseline,
+ * and one for below the basline.
+ * This function returns a boolean value TRUE = Y squeezind is necessary, 
+ * FALSE = no Y squeezing is necessary.
+ */
+{
+boolean squeeze_top, squeeze_bottom;
+boolean out_on_top, out_on_bottom;
+fix15 	bbox_top, bbox_bottom;
+fix15 	bbox_height;
+fix15   i;
+
+/* set up some flags and common calculations */
+squeeze_top = (sp_globals.pspecs->flags & SQUEEZE_TOP)? TRUE:FALSE;
+squeeze_bottom = (sp_globals.pspecs->flags & SQUEEZE_BOTTOM)? TRUE:FALSE;
+bbox_top = sp_globals.bbox_ymax_orus;
+bbox_bottom = sp_globals.bbox_ymin_orus;
+bbox_height = bbox_top - bbox_bottom;
+
+if (bbox_top > EM_TOP)
+    out_on_top = TRUE;
+else
+    out_on_top = FALSE;
+
+if (bbox_bottom < EM_BOT)
+    out_on_bottom = TRUE;
+else
+    out_on_bottom = FALSE;
+
+/*
+ * don't need Y squeezing if:
+ *     - Y squeezing not enabled
+ *     - bbox doesn't violate on top or bottom
+ *     - top squeezing only is enabled and char isn't out on top
+ *     - bottom squeezing only is enabled and char isn't out on bottom
+ */
+if ((!squeeze_top && !squeeze_bottom) || 
+    (!out_on_top && !out_on_bottom) ||
+    (squeeze_top && !squeeze_bottom && !out_on_top) || 
+    (squeeze_bottom && !squeeze_top && !out_on_bottom)) 
+    return FALSE;
+
+if (squeeze_top && (bbox_top > EM_TOP))
+    *top_scale = ((fix31)EM_TOP << 16)/(fix31)(bbox_top);
+else
+    *top_scale = 0x10000L;  /* 1 in 16.16 fixed point */
+
+if (squeeze_bottom && (bbox_bottom < EM_BOT))
+    *bottom_scale = ((fix31)-(EM_BOT) << 16)/(fix31)-bbox_bottom;
+else
+    *bottom_scale = 0x10000L;
+
+if (sp_globals.squeezing_compound)
+    {
+    for (i=first_Y_zone; i < (first_Y_zone + no_Y_ctrl_zones + 1); i++)
+        {
+        if (sp_plaid.orus[i] >= 0)
+            sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *top_scale)
+                              +sp_globals.pixrnd) & sp_globals.pixfix;
+        else
+            sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *bottom_scale)
+                              +sp_globals.pixrnd) & sp_globals.pixfix;
+        }
+    }
+return TRUE;
+}
+#endif
+
+FUNCTION static ufix8 FONTFAR *sp_setup_pix_table(
+GDECL
+ufix8 FONTFAR *pointer,   /* Pointer to first byte in control zone table */
+boolean short_form, /* TRUE if 1 byte from/to specification */
+fix15   no_X_ctrl_zones, /* Number of X control zones */
+fix15   no_Y_ctrl_zones) /* Number of Y control zones */
+/*
+ * Called by plaid_tcb() to read the control zone table from the
+ * character data in the font.
+ * Sets up a table of pixel values for all controlled coordinates. 
+ * Updates the pointer to the byte following the control zone
+ * data.
+ */
+{
+fix15    i, j, n;
+fix31    ppo;  
+#if INCL_SQUEEZING || INCL_ISW
+fix31    xppo0; /* top level pixels per oru */
+fix31    yppo0; /* top level pixels per oru */
+#endif
+ufix8    edge_org;
+ufix8    edge;
+ufix8    start_edge;
+ufix8    end_edge;
+ufix16   constr_org;
+fix15    constr_nr;
+fix15    zone_pix;
+fix31    whole_zone; /* non-transformed value of the first X zone */
+ufix16   tmpufix16;  /* in extended mode, macro uses secnd term */
+#if INCL_SQUEEZING
+fix31    x_scale;
+fix31	 y_top_scale, y_bottom_scale;
+fix31    x_offset;
+boolean  squeezed_y;
+fix15    setwidth_pix, em_top_pix, em_bot_pix;
+#endif
+
+#if INCL_ISW
+boolean  imported_width;
+fix31	 isw_scale;
+fix15    isw_setwidth_pix;
+#endif
+
+#if INCL_ISW || INCL_SQUEEZING
+boolean squeezed_x;
+#endif
+
+#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
+begin_ctrl_zones(no_X_ctrl_zones, no_Y_ctrl_zones);
+#endif                                                    
+
+
+edge_org = 0;
+constr_org = 0;
+sp_globals.rnd_xmin = 0;  /* initialize the error for chars with no zone */
+n = no_X_ctrl_zones;
+ppo = sp_globals.tcb.xppo;
+#if INCL_SQUEEZING || INCL_ISW
+xppo0 = sp_globals.tcb0.xppo;
+yppo0 = sp_globals.tcb0.yppo;
+squeezed_x = FALSE;
+#endif
+
+#if INCL_SQUEEZING
+squeezed_x = calculate_x_scale (&x_scale, &x_offset, no_X_ctrl_zones);
+squeezed_y = calculate_y_scale(&y_top_scale,&y_bottom_scale,(n+1),
+	     no_Y_ctrl_zones);
+#if INCL_ISW
+if (sp_globals.import_setwidth_act == TRUE)
+setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> 
+	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
+
+else
+#endif
+setwidth_pix = ((fix15)(((fix31)sp_globals.setwidth_orus * xppo0) >> 
+	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
+/* check for overflow */
+if (setwidth_pix < 0)
+	setwidth_pix = 0x7fff; /* set to maximum */
+em_bot_pix = ((fix15)(((fix31)EM_BOT * yppo0) >> 
+	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
+em_top_pix = ((fix15)(((fix31)EM_TOP * yppo0) >> 
+	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
+#endif
+
+#if INCL_ISW
+/* convert to pixels */
+isw_setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> 
+	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
+/* check for overflow */
+if (isw_setwidth_pix < 0)
+	isw_setwidth_pix = 0x7fff; /* set to maximum */
+if (!squeezed_x && ((imported_width = sp_globals.import_setwidth_act) == TRUE))
+    {
+    isw_scale = compute_isw_scale();
+
+    /* look for the first non-negative oru value, scale and add the offset    */
+    /* to the corresponding pixel value - note that the pixel value           */
+    /* is set in read_oru_table.                                              */
+    
+    /* look at all the X edges */
+        for (i=0; i < (no_X_ctrl_zones+1); i++)
+        if (sp_plaid.orus[i] >= 0)
+           {
+           sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], isw_scale)
+                  +sp_globals.pixrnd) & sp_globals.pixfix;
+           break;
+           }
+
+    }
+#endif
+
+for (i = 0; ; i++)               /* For X and Y control zones... */
+    {
+    for (j = 0; j < n; j++)      /* For each zone in X or Y... */
+        {
+        if (short_form)          /* 1 byte from/to specification? */
+            {
+            edge = NEXT_BYTE(pointer); /* Read packed from/to spec */
+            start_edge = edge_org + (edge & 0x0f); /* Extract start edge */
+            end_edge = edge_org + (edge >> 4); /* Extract end edge */
+            }
+        else                     /* 2 byte from/to specification? */
+            {
+            start_edge = edge_org + NEXT_BYTE(pointer); /* Read start edge */
+            end_edge = edge_org + NEXT_BYTE(pointer); /* read end edge */
+            }
+        constr_nr = constr_org +
+            NEXT_BYTES(pointer, tmpufix16); /* Read constraint number */ 
+#if INCL_SQUEEZING
+        if (i == 0 && squeezed_x)
+	    calculate_x_pix(start_edge, end_edge, constr_nr,
+                            x_scale, x_offset, ppo, setwidth_pix);
+	else if (i == 1 && squeezed_y)
+	    calculate_y_pix(start_edge, end_edge,constr_nr,
+ 		y_top_scale, y_bottom_scale, ppo, em_top_pix, em_bot_pix);
+	else
+	{
+#endif
+#if INCL_ISW
+	if (i==0 && imported_width)
+            calculate_x_pix(start_edge, end_edge, constr_nr,
+                            isw_scale, 0,  ppo, isw_setwidth_pix);
+	else
+	{
+#endif
+        if (!sp_globals.c_act[constr_nr])   /* Constraint inactive? */
+            {
+            zone_pix = ((fix15)((((fix31)sp_plaid.orus[end_edge] -
+			(fix31)sp_plaid.orus[start_edge]) * ppo) /
+			(1<<sp_globals.mpshift)) + sp_globals.pixrnd) &
+			sp_globals.pixfix;
+            if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
+                goto L1;
+            }
+        zone_pix = sp_globals.c_pix[constr_nr]; /* Use zone size from constr table */
+        if (start_edge > end_edge) /* sp_plaid.orus[start_edge] > sp_plaid.orus[end_edge]? */
+            {
+            zone_pix = -zone_pix; /* Use negatve zone size */
+            }
+    L1:
+                        /* inter-character spacing fix */
+        if ((j == 0) && (i == 0))      /* if this is the 1st X zone, save rounding error */
+            {                          /*  get the non-xformed - xformed zone, in right direction */
+            whole_zone = (((fix31)sp_plaid.orus[end_edge] -
+			(fix31)sp_plaid.orus[start_edge]) *
+			ppo) / (1<<sp_globals.mpshift);
+            sp_globals.rnd_xmin = whole_zone - zone_pix;
+            }
+        sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */
+#if INCL_SQUEEZING
+        if (i == 0)  /* in the x direction */
+            { /* brute force squeeze */
+            if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && 
+                (sp_plaid.pix[end_edge] < 0))
+                sp_plaid.pix[end_edge] = 0;
+            if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && 
+                (sp_plaid.pix[end_edge] > setwidth_pix))
+                sp_plaid.pix[end_edge] = setwidth_pix;
+            }
+        if (i == 1) /* in the y direction */
+            {  /* brute force squeeze */
+            if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && 
+                (sp_plaid.pix[end_edge] > em_top_pix))
+                sp_plaid.pix[end_edge] = em_top_pix;
+            if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) &&
+                (sp_plaid.pix[end_edge] < em_bot_pix))
+                sp_plaid.pix[end_edge] = em_bot_pix;
+            }
+#endif
+#if INCL_SQUEEZING
+	}
+#endif
+#if INCL_ISW
+	}
+#endif
+#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
+        record_ctrl_zone(
+            (fix31)sp_plaid.pix[start_edge] << (16 - sp_globals.pixshift), 
+            (fix31)sp_plaid.pix[end_edge] << (16 - sp_globals.pixshift), 
+            (fix15)(constr_nr - constr_org));
+#endif
+        }
+    if (i)                       /* Y pixels done? */
+        break;                                          
+    edge_org = sp_globals.Y_edge_org;       /* Prepare to process Y ctrl zones */
+    constr_org = sp_globals.Y_constr_org;
+    n = no_Y_ctrl_zones;                      
+    ppo = sp_globals.tcb.yppo;                            
+    }
+
+#if DEBUG
+printf("\nX PIX TABLE\n");
+n = no_X_ctrl_zones + 1;
+for (i = 0; i < n; i++)
+    printf("%2d %6.1f\n", i, (real)sp_plaid.pix[i] / (real)sp_globals.onepix);
+printf("\nY PIX TABLE\n");
+n = no_Y_ctrl_zones + 1;
+for (i = 0; i < n; i++)
+    {
+    j = i + no_X_ctrl_zones + 1;
+    printf("%2d %6.1f\n", i, (real)sp_plaid.pix[j] / (real)sp_globals.onepix);
+    }
+#endif
+
+return pointer;
+}
+
+
+FUNCTION static ufix8 FONTFAR *sp_setup_int_table(
+GDECL
+ufix8 FONTFAR *pointer,   /* Pointer to first byte in interpolation zone table */
+fix15  no_X_int_zones, /* Number of X interpolation zones */
+fix15  no_Y_int_zones) /* Number of X interpolation zones */
+/*
+ * Called by plaid_tcb() to read the interpolation zone table from the
+ * character data in the font. 
+ * Sets up a table of interpolation coefficients with one entry for
+ * every X or Y interpolation zone.
+ * Updates the pointer to the byte following the interpolation zone
+ * data.
+ */
+{
+fix15    i, j, k, l, n;
+ufix8    format;
+ufix8    format_copy;
+ufix8    tmpufix8;
+fix15    start_orus = 0;
+ufix8    edge_org;
+ufix8    edge;
+ufix16   adj_factor;
+fix15    adj_orus;
+fix15    end_orus = 0;
+fix31    zone_orus;
+fix15    start_pix = 0;
+fix15    end_pix = 0;
+
+
+#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
+begin_int_zones(no_X_int_zones, no_Y_int_zones);
+#endif
+
+i = 0;
+edge_org = 0;
+n = no_X_int_zones;
+for (j = 0; ; j++)
+    {
+    for (k = 0; k < n; k++)
+        {
+        format = NEXT_BYTE(pointer);
+        if (format & BIT7)       /* Short start/end point spec? */
+            {
+            tmpufix8 = NEXT_BYTE(pointer);
+            edge = edge_org + (tmpufix8 & 0xf);
+            start_orus = sp_plaid.orus[edge];
+            start_pix = sp_plaid.pix[edge];
+            edge = edge_org + (tmpufix8 >> 4);
+            end_orus = sp_plaid.orus[edge];
+            end_pix = sp_plaid.pix[edge];
+            }
+        else                     /* Standard start and end point spec? */
+            {
+            format_copy = format;
+            for (l = 0; ; l++)   /* Loop for start and end point */
+                {
+                switch (format_copy & 0x7) /* Decode start/end point format */
+                    {
+
+                case 0:          /* Index to control edge */
+                    edge = edge_org + NEXT_BYTE(pointer);
+                    end_orus = sp_plaid.orus[edge];
+                    end_pix = sp_plaid.pix[edge];
+                    break;
+
+                case 1:          /* 1 byte fractional distance to next edge */
+                    adj_factor =  0xffff & NEXT_BYTE(pointer) << 8;
+                    goto L1;
+
+
+                case 2:          /* 2 byte fractional distance to next edge */
+		    adj_factor = 0xffff & NEXT_WORD(pointer);
+                L1: edge = edge_org + NEXT_BYTE(pointer);
+                    end_orus = sp_plaid.orus[edge] +
+                        ((((fix31)sp_plaid.orus[edge + 1] - (fix31)sp_plaid.orus[edge]) * 
+                        (ufix32)adj_factor + (fix31)32768) >> 16);
+                    end_pix = sp_plaid.pix[edge] +
+                        ((((fix31)sp_plaid.pix[edge + 1] - (fix31)sp_plaid.pix[edge]) * 
+                        (ufix32)adj_factor + (fix31)32768) >> 16);
+                    break;
+
+                case 3:          /* 1 byte delta orus before first edge */
+                    adj_orus = -(fix15)NEXT_BYTE(pointer); 
+                    goto L2;
+
+                case 4:          /* 2 byte delta orus before first edge */
+                    adj_orus = -NEXT_WORD(pointer);
+                L2: edge = edge_org;
+                    goto L4;
+
+                case 5:          /* 1 byte delta orus after last edge */
+                    adj_orus = (fix15)NEXT_BYTE(pointer);
+                    goto L3;
+
+                case 6:          /* 2 byte delta orus after last edge */
+                    adj_orus = NEXT_WORD(pointer);
+                L3: edge = j? sp_globals.Y_edge_org + sp_globals.no_Y_orus - 1: sp_globals.no_X_orus - 1;
+                L4: end_orus = sp_plaid.orus[edge] + adj_orus;
+                    end_pix = sp_plaid.pix[edge] + 
+                        (((fix31)adj_orus * (fix31)(j? sp_globals.tcb.yppo: sp_globals.tcb.xppo) + 
+                          sp_globals.mprnd) / (1<<sp_globals.mpshift));
+                    break;
+
+                    }
+
+                if (l)           /* Second time round loop? */
+                    break;
+                format_copy >>= 3; /* Adj format to decode end point format */
+                start_orus = end_orus; /* Save start point oru value */
+                start_pix = end_pix; /* Save start point pixel value */
+                }
+            }
+#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
+        record_int_zone(
+            (fix31)start_pix << (16 - sp_globals.pixshift), 
+            (fix31)end_pix << (16 - sp_globals.pixshift));
+#endif
+        zone_orus = (fix31)end_orus - (fix31)start_orus;
+        sp_plaid.mult[i] = ((((fix31)end_pix - (fix31)start_pix) << sp_globals.mpshift) + 
+                   (zone_orus / 2)) / zone_orus;
+        sp_plaid.offset[i] = 
+            (((((fix31)start_pix + (fix31)end_pix) << sp_globals.mpshift) - 
+              ((fix31)sp_plaid.mult[i] * ((fix31)start_orus + (fix31)end_orus))) / 2) + 
+            sp_globals.mprnd;
+        i++;
+        }
+    if (j)                       /* Finished? */
+        break;
+    edge_org = sp_globals.Y_edge_org;       /* Prepare to process Y ctrl zones */
+    n = no_Y_int_zones;
+    }
+
+#if DEBUG
+printf("\nX INT TABLE\n");
+n = no_X_int_zones;
+for (i = 0; i < n; i++)
+    {
+    printf("%2d %7.4f %7.4f\n", i, 
+        (real)sp_plaid.mult[i] / (real)(1 << sp_globals.multshift), 
+        (real)sp_plaid.offset[i] / (real)(1 << sp_globals.multshift));
+    }
+printf("\nY INT TABLE\n");
+n = no_Y_int_zones;
+for (i = 0; i < n; i++)
+    {
+    j = i + no_X_int_zones;
+    printf("%2d %7.4f %7.4f\n", i, 
+        (real)sp_plaid.mult[j] / (real)(1 << sp_globals.multshift), 
+        (real)sp_plaid.offset[j] / (real)(1 << sp_globals.multshift));
+    }
+#endif
+
+return pointer;
+}
+#if INCL_ISW
+FUNCTION fix31 compute_isw_scale()
+GDECL
+{
+fix31 isw_scale;
+	
+if (sp_globals.setwidth_orus == 0)
+    isw_scale = 0x00010000;
+else
+    isw_scale = ((fix31)sp_globals.imported_width << 16)/
+                 (fix31)sp_globals.setwidth_orus;
+return isw_scale;
+}
+#endif