svn merge file:///D:/svnrepos/vcxsrv/branches/released .

Gives currently link errors. xorg-server needs to be upgraded to.

1 files changed, 0 insertions, 1214 deletions

diff --git a/libXfont/src/Speedo/set_trns.c b/libXfont/src/Speedo/set_trns.c
deleted file mode 100644
index 35c2e33cf..000000000
--- a/libXfont/src/Speedo/set_trns.c
+++ /dev/null
@@ -1,1214 +0,0 @@
-/* $Xorg: set_trns.c,v 1.3 2000/08/17 19:46:27 cpqbld Exp $ */
-
-/*
-
-Copyright 1989-1991, Bitstream Inc., Cambridge, MA.
-You are hereby granted permission under all Bitstream propriety rights to
-use, copy, modify, sublicense, sell, and redistribute the Bitstream Speedo
-software and the Bitstream Charter outline font for any purpose and without
-restrictions; provided, that this notice is left intact on all copies of such
-software or font and that Bitstream's trademark is acknowledged as shown below
-on all unmodified copies of such font.
-
-BITSTREAM CHARTER is a registered trademark of Bitstream Inc.
-
-
-BITSTREAM INC. DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
-WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE.  BITSTREAM SHALL NOT BE LIABLE FOR ANY DIRECT OR INDIRECT
-DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST DATA, OR ANY OTHER
-INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR IN ANY WAY CONNECTED
-WITH THE SPEEDO SOFTWARE OR THE BITSTREAM CHARTER OUTLINE FONT.
-
-*/
-/* $XFree86: xc/lib/font/Speedo/set_trns.c,v 1.5tsi Exp $ */
-
-
-
-/*************************** S E T _ T R N S . C *****************************
- *                                                                           *
- * This module is called from do_char.c to set up the intelligent            *
- * transformation for one character (or sub-character of a composite         *
- * character.
- *                                                                           *
- ****************************************************************************/
-
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-#include "spdo_prv.h"               /* General definitions for Speedo   */
-
-#define   DEBUG      0
-
-#if DEBUG
-#include <stdio.h>
-#define SHOW(X) printf("X = %d\n", X)
-#else
-#define SHOW(X)
-#endif
-/***** LOCAL MACROS     *****/
-
-#define SQUEEZE_X_ORU(A,B,C) ((((fix31)A * (fix31)B) + C) >> 16)
-#define ABS(A) ((A < 0)? -A:A) /* absolute value */
-#define IMPORT_FACTOR    \
-	shift = 16;\
-	while (*x_factor > (0x7fffffffL / (isw_scale >> (16 - shift))))\
-		shift--;\
-    	*x_factor = (*x_factor * (isw_scale>>(16-shift))) >> shift;
-
-/***** GLOBAL VARIABLES *****/
-
-/*****  GLOBAL FUNCTIONS *****/
-
-/***** EXTERNAL VARIABLES *****/
-
-/***** EXTERNAL FUNCTIONS *****/
-
-/***** STATIC VARIABLES *****/
-
-/***** STATIC FUNCTIONS *****/
-
-static void sp_constr_update(PROTO_DECL1);
-static ufix8 FONTFAR *sp_setup_pix_table(PROTO_DECL2 ufix8 FONTFAR *pointer,boolean short_form,fix15 no_X_ctrl_zones,fix15 no_Y_ctrl_zones);
-static ufix8 FONTFAR *sp_setup_int_table(PROTO_DECL2 ufix8 FONTFAR *pointer,fix15 no_X_int_zones,fix15 no_Y_int_zones);
-
-
-FUNCTION void init_tcb()
-GDECL
-/*
- * Called by sp_make_char() and make_comp_char() to initialize the current
- * transformation control block to the top level transformation.
- */
-{
-sp_globals.tcb = sp_globals.tcb0;
-}
-
-FUNCTION void scale_tcb(
-GDECL
-tcb_t GLOBALFAR *ptcb,    /* Transformation control block */
-fix15  x_pos,   /* X position (outline res units) */
-fix15  y_pos,   /* Y position (outline res units) */
-fix15  x_scale, /* X scale factor * ONE_SCALE */
-fix15  y_scale) /* Y scale factor * ONE_SCALE */
-/*
- * Called by make_comp_char() to apply position and scale for each of the
- * components of a compound character.
- */
-{     
-fix15 xx_mult = ptcb->xxmult;
-fix15 xy_mult = ptcb->xymult;
-fix31 x_offset = ptcb->xoffset;
-fix15 yx_mult = ptcb->yxmult;
-fix15 yy_mult = ptcb->yymult;
-fix31 y_offset = ptcb->yoffset;
-
-ptcb->xxmult = TRANS(xx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT);
-ptcb->xymult = TRANS(xy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT);
-ptcb->xoffset = MULT16(xx_mult, x_pos) + MULT16(xy_mult, y_pos) + x_offset;
-ptcb->yxmult = TRANS(yx_mult, x_scale, (fix31)SCALE_RND, SCALE_SHIFT);
-ptcb->yymult = TRANS(yy_mult, y_scale, (fix31)SCALE_RND, SCALE_SHIFT);
-ptcb->yoffset = MULT16(yx_mult, x_pos) + MULT16(yy_mult, y_pos) + y_offset;
-
-type_tcb(ptcb); /* Reclassify transformation types */
-}
-
-
-static FUNCTION ufix8 FONTFAR *read_oru_table(
-GDECL
-ufix8 FONTFAR *pointer)   /* Pointer to first byte in controlled coord table */
-/*
- * Called by plaid_tcb() to read the controlled coordinate table from the
- * character data in the font. 
- * Updates the pointer to the byte following the controlled coordinate
- * data.
- */
-{
-fix15    i, j, k, n;
-boolean  zero_not_in;
-boolean  zero_added;
-fix15    oru;
-
-fix15    pos;
-
-i = 0;
-n = sp_globals.no_X_orus;
-pos = sp_globals.tcb.xpos;
-for (j = 0; ; j++)
-    {
-    zero_not_in = TRUE;
-    zero_added = FALSE;
-    for (k = 0; k < n; k++)
-        {
-        oru = NEXT_WORD(pointer);
-        if (zero_not_in && (oru >= 0)) /* First positive oru value? */
-            {
-            sp_plaid.pix[i] = pos;        /* Insert position in pix array */
-            if (oru != 0)        /* Zero oru value omitted? */
-                {
-                sp_plaid.orus[i++] = 0;   /* Insert zero value in oru array */
-                zero_added = TRUE; /* Remember to increment size of array */
-                }
-            zero_not_in = FALSE; /* Inhibit further testing for zero ins */
-            }
-        sp_plaid.orus[i++] = oru;         /* Add specified oru value to array */
-        }
-    if (zero_not_in)             /* All specified oru values negative? */
-        {
-        sp_plaid.pix[i] = pos;            /* Insert position in pix array */
-        sp_plaid.orus[i++] = 0;           /* Add zero oru value */
-        zero_added = TRUE;       /* Remember to increment size of array */
-        }
-    if (j)                       /* Both X and Y orus read? */
-        break;
-    if (zero_added)                                 
-        sp_globals.no_X_orus++;             /* Increment X array size */
-    n = sp_globals.no_Y_orus;               /* Prepare to read Y oru values */
-    pos = sp_globals.tcb.ypos;
-    }
-if (zero_added)                  /* Zero Y oru value added to array? */
-    sp_globals.no_Y_orus++;                 /* Increment Y array size */
-
-#if DEBUG
-printf("\nX ORUS\n");
-n = sp_globals.no_X_orus;
-for (i = 0; i < n; i++)
-    {
-    printf("%2d %4d\n", i, sp_plaid.orus[i]);
-    }
-printf("\nY ORUS\n");
-n = sp_globals.no_Y_orus;
-for (i = 0; i < n; i++)
-    {
-    printf("%2d %4d\n", i, sp_plaid.orus[i + sp_globals.no_X_orus]);
-    }
-#endif
-
-return pointer;             /* Update pointer */
-}
-
-FUNCTION ufix8 FONTFAR *plaid_tcb(
-GDECL
-ufix8 FONTFAR *pointer,  /* Pointer to next byte in char data */
-ufix8    format)    /* Character format byte */
-/* 
- * Called by make_simp_char() and make_comp_char() to set up the controlled
- * coordinate table and process all intelligent scaling rules embedded
- * in the character data.
- * Updates pointer to first byte after plaid data.
- * This is used only if intelligent scaling is enabled in the
- * configuration definitions.
- */
-{
-fix15 no_X_ctrl_zones;
-fix15 no_Y_ctrl_zones;
-fix15 no_X_int_zones;
-fix15 no_Y_int_zones;
-
-#if INCL_PLAID_OUT         /* Plaid data monitoring included? */
-begin_plaid_data();
-#endif
-
-sp_constr_update();           /* Update constraint table if required */
-
-sp_globals.no_X_orus = (format & BIT2)?  
-    (fix15)NEXT_BYTE(pointer):
-    0;
-sp_globals.no_Y_orus = (format & BIT3)?
-    (fix15)NEXT_BYTE(pointer):
-    0;
-pointer = read_oru_table(pointer);  /* Updates no_X/Y/orus to include zero values */
-sp_globals.Y_edge_org = sp_globals.no_X_orus;                                                  
-if (sp_globals.no_X_orus > 1)         /* 2 or more controlled X coordinates? */
-    sp_globals.tcb.xmode = sp_globals.tcb.xtype; /* Enable intelligent scaling in X */
-
-if (sp_globals.no_Y_orus > 1)         /* 2 or more controlled Y coordinates? */
-    sp_globals.tcb.ymode = sp_globals.tcb.ytype; /* Enable intelligent scaling in Y */
-
-no_X_ctrl_zones = sp_globals.no_X_orus - 1;
-no_Y_ctrl_zones = sp_globals.no_Y_orus - 1;
-pointer = sp_setup_pix_table(pointer, (boolean)(format & BIT4), 
-    no_X_ctrl_zones, no_Y_ctrl_zones);
-
-no_X_int_zones = (format & BIT6)?
-    (fix15)NEXT_BYTE(pointer):
-    0;
-no_Y_int_zones = (format & BIT7)?
-    (fix15)NEXT_BYTE(pointer):
-    0;
-sp_globals.Y_int_org = no_X_int_zones;
-pointer = sp_setup_int_table(pointer, no_X_int_zones, no_Y_int_zones);
-
-#if INCL_PLAID_OUT         /* Plaid data monitoring included? */
-end_plaid_data();
-#endif
-
-return pointer;
-}
-
-FUNCTION static void sp_constr_update()
-GDECL
-/*
- * Called by plaid_tcb() to update the constraint table for the current
- * transformation.
- * This is always carried out whenever a character is generated following
- * a change of font or scale factor or after initialization.     
- */
-{
-fix31    ppo;
-fix15    xppo;
-fix15    yppo;
-ufix8 FONTFAR  *pointer;
-fix15    no_X_constr;
-fix15    no_Y_constr;
-fix15    i, j, k, l, n;
-fix15    ppm;
-ufix8    format;
-ufix8    format1;
-fix15    limit;
-ufix16   constr_org;
-fix15    constr_nr;
-fix15    size;
-fix31    off;
-fix15    min;     
-fix15    orus;
-fix15    pix; 
-ufix16   tmpufix16;  /* in extended mode, macro uses secnd term */
-
-if (sp_globals.constr.data_valid &&         /* Constr table already done and ... */
-    (sp_globals.tcb.xppo == sp_globals.constr.xppo) && /* ... X pix per oru unchanged and ... */
-    (sp_globals.tcb.yppo == sp_globals.constr.yppo))   /* ... Y pix per oru unchanged? */
-    {
-    return;                      /* No need to update constraint table */
-    }
-
-sp_globals.constr.xppo = xppo = sp_globals.tcb.xppo;   /* Update X pixels per oru indicator */
-sp_globals.constr.yppo = yppo = sp_globals.tcb.yppo;   /* Update Y pixels per oru indicator */
-sp_globals.constr.data_valid = TRUE;        /* Mark constraint table valid */
-
-pointer = sp_globals.constr.org;            /* Point to first byte of constraint data */
-no_X_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of X constraints */
-no_Y_constr = NEXT_BYTES(pointer, tmpufix16); /* Read nmbr of Y constraints */
-
-i = 0;
-constr_org = 0;
-n = no_X_constr;
-ppo = xppo;
-for (j = 0; ; j++)
-    {
-    sp_globals.c_act[i] = FALSE;            /* Flag constraint 0 not active */
-    sp_globals.c_pix[i++] = 0;              /* Constraint 0 implies no minimum */
-    sp_globals.c_act[i] = FALSE;            /* Flag constraint 1 not active */
-    sp_globals.c_pix[i++] = sp_globals.onepix; /* Constraint 1 implies min 1 pixel*/
-    ppm = (ppo * (fix31)sp_globals.orus_per_em) >> sp_globals.multshift;
-    for (k = 0; k < n; k++)
-        {
-        format = NEXT_BYTE(pointer);        /* Read format byte */
-        limit = (fix15)NEXT_BYTE(pointer);  /* Read limit field */
-        sp_globals.c_act[i] = 
-            ((ppm < limit) || (limit == 255)) &&
-            sp_globals.constr.active;
-        if (sp_globals.c_act[i])            /* Constraint active? */
-            {
-            if ((format & BIT1) &&          /* Constraint specified and ... */
-                (constr_nr = constr_org +
-                    ((format & BIT0)?       /* Read unsigned constraint value */
-                    NEXT_WORD(pointer): 
-                    (fix15)NEXT_BYTE(pointer)),
-                 sp_globals.c_act[constr_nr])) /* ... and specified constraint active? */ 
-                {
-                pix = sp_globals.c_pix[constr_nr]; /* Use constrained pixel value */
-                format1 = format;
-                for (l = 2; l > 0; l--)     /* Skip 2 arguments */
-                    {
-                    format1 >>= 2;
-                    if ((size = format1 & 0x03))
-                        pointer += size - 1;
-                    }
-                }
-            else                 /* Constraint absent or inactive? */
-                {
-                orus = (format & BIT2)? /* Read unsigned oru value */
-                    NEXT_WORD(pointer):
-                    (fix15)NEXT_BYTE(pointer);
-
-                if (format & BIT5) /* Specified offset value? */
-                    {
-                    off = (fix31)((format & BIT4)? /* Read offset value */
-                        NEXT_WORD(pointer):
-                        (fix7)NEXT_BYTE(pointer));
-                    off = (off << (sp_globals.multshift - 6)) + sp_globals.multrnd;
-                    }
-                else             /* Unspecified (zero) offset value? */
-                    {
-                    off = sp_globals.multrnd;
-                    }
-
-                pix = (fix15)(((fix31)orus * ppo + off) / (1 << sp_globals.mpshift)) & sp_globals.pixfix;
-                }
-            }
-        else                     /* Constraint inactive? */
-            {
-            format1 = format;
-            for (l = 3; l > 0; l--) /* Skip over 3 arguments */
-                {
-                if ((size = format1 & 0x03))
-                    pointer += size - 1;
-                format1 >>= 2;
-                }
-            pix = 0;
-            }
-
-        if (format & 0xc0) /* Specified minimum value? */
-            {
-            min = (format & BIT7)? /* Read unsigned minimum value */
-                (fix15)NEXT_BYTE(pointer) << sp_globals.pixshift:
-                sp_globals.onepix;
-            }
-        else             /* Unspecified (zero) minimum value? */
-            {
-            min = 0;
-            }
-
-        sp_globals.c_pix[i] = (pix < min)? min: pix;
-        i++;
-        }
-    if (j) break;                /* Finished if second time around loop */
-    constr_org = sp_globals.Y_constr_org = i;
-    n = no_Y_constr;
-    ppo = yppo;
-    }
-
-#if DEBUG
-printf("\nCONSTRAINT TABLE\n");
-n = no_X_constr + 2;
-for (i = 0; i < n; i++)
-    {
-    printf("%3d   ", i);
-    if (sp_globals.c_act[i])
-        {
-        printf("T ");
-        }
-    else
-        {
-        printf("F ");
-        }
-    printf("%5.1f\n", ((real)sp_globals.c_pix[i] / (real)sp_globals.onepix));
-    }
-printf("--------------\n");
-n = no_Y_constr + 2;
-for (i = 0; i < n; i++)
-    {
-    j = i + sp_globals.Y_constr_org;
-    printf("%3d   ", i);
-    if (sp_globals.c_act[j])
-        {
-        printf("T ");
-        }
-    else
-        {
-        printf("F ");
-        }
-    printf("%5.1f\n", ((real)sp_globals.c_pix[j] / (real)sp_globals.onepix));
-    }
-#endif
-
-}
-
-#if INCL_SQUEEZING || INCL_ISW
-FUNCTION static void calculate_x_pix(
-GDECL
-ufix8 start_edge, ufix8 end_edge,
-ufix16 constr_nr,
-fix31 x_scale,
-fix31 x_offset,
-fix31 ppo,
-fix15    setwidth_pix)
-/*
- * Called by sp_setup_pix_table() when X squeezing is necessary
- * to insert the correct edge in the global pix array
- */
-{
-fix15 zone_pix;
-fix15 start_oru, end_oru;
-
-/* compute scaled oru coordinates */
-start_oru= (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[start_edge], x_scale, x_offset));
-end_oru   = (fix15)(SQUEEZE_X_ORU(sp_plaid.orus[end_edge], x_scale, x_offset));
-
-if (!sp_globals.c_act[constr_nr]) /* constraint inactive */
-    {
-    /* calculate zone width */
-    zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo) /
-	(1<<sp_globals.mpshift)) + sp_globals.pixrnd) & sp_globals.pixfix;
-    /* check for overflow */
-    if (((end_oru-start_oru) > 0) && (zone_pix < 0))
-	zone_pix = 0x7ffff;
-    /* check for minimum */
-    if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
-    	goto Lx;
-    }
-/* use the zone size from the constr table - scale it */
-zone_pix = (fix15)(((SQUEEZE_MULT(x_scale,sp_globals.c_pix[constr_nr]))
-            + sp_globals.pixrnd) & sp_globals.pixfix);
-
-/* look for overflow */
-if ((sp_globals.c_pix[constr_nr] > 0) && (zone_pix < 0))
-	zone_pix = 0x7fff;
-
-if (start_edge > end_edge)
-    {
-    zone_pix = -zone_pix;
-    }
-Lx:
-/* assign pixel value to global pix array */
-sp_plaid.pix[end_edge]=sp_plaid.pix[start_edge] + zone_pix;
-
-/* check for overflow */
-if (((sp_plaid.pix[start_edge] >0) && (zone_pix >0)) &&
-    (sp_plaid.pix[end_edge] < 0))
-	sp_plaid.pix[end_edge] = 0x7fff; /* set it to the max */
-
-/* be sure to be in the setwidth !*/
-#if INCL_ISW
-if (!sp_globals.import_setwidth_act) /* only check left edge if not isw only */
-#endif
-if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && (sp_plaid.pix[end_edge] < 0))
-    sp_plaid.pix[end_edge] = 0;
-if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && 
-    (sp_plaid.pix[end_edge] > setwidth_pix))
-    sp_plaid.pix[end_edge] = setwidth_pix;
-
-}
-#endif
-
-#if INCL_SQUEEZING
-FUNCTION static void calculate_y_pix(
-GDECL
-ufix8 start_edge, ufix8 end_edge,
-ufix16 constr_nr,
-fix31 top_scale, fix31 bottom_scale,
-fix31 ppo,
-fix15 em_top_pix, fix15 em_bot_pix)
-
-/*
- * Called by sp_setup_pix_table() when Y squeezing is necessary
- * to insert the correct edge in the global pix array
- */
-{
-fix15 zone_pix;
-fix15 start_oru, end_oru;
-fix31 zone_width, above_base, below_base;
-
-/* check whether edge is above or below the baseline                */
-/* and apply appropriate scale factor to get scaled oru coordinates */
-if (sp_plaid.orus[start_edge] < 0)
-    start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], bottom_scale));
-else
-    start_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[start_edge], top_scale));
-
-if (sp_plaid.orus[end_edge] < 0)
-    end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], bottom_scale));
-else
-    end_oru =(fix15)(SQUEEZE_MULT(sp_plaid.orus[end_edge], top_scale));
-
-if (!sp_globals.c_act[constr_nr])   /* Constraint inactive? */
-   {
-   /* calculate zone width */
-    zone_pix = (fix15)(((((fix31)end_oru - (fix31)start_oru) * ppo)
-		>> sp_globals.mpshift)+ sp_globals.pixrnd) & sp_globals.pixfix;
-   /* check minimum */
-    if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
-                    goto Ly;
-    }
-
-/* Use zone size from constr table */
-if ((end_oru >= 0) && (start_oru >=0))
-    /* all above baseline */
-    zone_pix = (fix15)(SQUEEZE_MULT(top_scale, sp_globals.c_pix[constr_nr]));
-else if ((end_oru <= 0) && (start_oru <=0))
-    /* all below baseline */
-    zone_pix = (fix15)(SQUEEZE_MULT(bottom_scale, sp_globals.c_pix[constr_nr]));
-else
-    {
-    /* mixture */
-    if (start_oru > 0)
-        {
-	zone_width = start_oru - end_oru;
-        /* get % above baseline in 16.16 fixed point */
-        above_base = (((fix31)start_oru) << 16) /
-		     ((fix31)zone_width) ;
-        /* get % below baseline in 16.16 fixed point */
-        below_base = (((fix31)-end_oru) << 16) /
-		     ((fix31)zone_width) ;
-	}
-    else
-        {
-        zone_width = end_oru - start_oru;
-        /* get % above baseline in 16.16 fixed point */
-        above_base = (((fix31)-start_oru) << 16) /
-		     ((fix31)zone_width) ;
-        /* get % below baseline in 16.16 fixed point */
-        below_base = (((fix31)end_oru) << 16) /
-		     ((fix31)zone_width) ;
-       }
-    /* % above baseline * total zone * top_scale +  */
-    /* % below baseline * total zone * bottom_scale */
-    zone_pix = ((((above_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) *
-                top_scale) +
-	       (((below_base * (fix31)sp_globals.c_pix[constr_nr]) >> 16) *
-		bottom_scale)) >> 16;
-    }
-
-/* make this zone pix fall on a pixel boundary */
-zone_pix = (zone_pix + sp_globals.pixrnd) & sp_globals.pixfix;
-
-/* if minimum is in effect make the zone one pixel */
-if ((sp_globals.c_pix[constr_nr] != 0) && (zone_pix < sp_globals.onepix)) 
-    zone_pix = sp_globals.onepix; 
-    
-if (start_edge > end_edge) 
-       {
-        zone_pix = -zone_pix; /* Use negatve zone size */
-        }
-Ly:
-/* assign global pix value */
-sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */
-
-/* make sure it is in the EM !*/
-if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && 
-    (sp_plaid.pix[end_edge] > em_top_pix))
-    sp_plaid.pix[end_edge] = em_top_pix;
-if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) &&
-    (sp_plaid.pix[end_edge] < em_bot_pix))
-    sp_plaid.pix[end_edge] = em_bot_pix;
-}
-
-FUNCTION boolean calculate_x_scale(x_factor, x_offset, no_X_ctrl_zones)
-GDECL
-fix31 *x_factor,
-fix31 *x_offset,
-fix15   no_X_ctrl_zones) /* Number of X control zones */
-/*
- * Called by sp_setup_pix_table() when squeezing is included
- * to determine whether X scaling is necessary.  If it is, the
- * scale factor and offset are computed.  This function returns
- * a boolean value TRUE = X squeezind is necessary, FALSE = no
- * X squeezing is necessary.
- */
-{
-boolean squeeze_left, squeeze_right;
-boolean out_on_right, out_on_left;
-fix15 bbox_width,set_width;
-fix15 bbox_xmin, bbox_xmax;
-fix15 x_offset_pix;
-fix15 i;
-#if INCL_ISW
-fix31 isw_scale;
-fix15 shift;
-#endif
-
-
-/* set up some flags and common calculations */
-squeeze_left = (sp_globals.pspecs->flags & SQUEEZE_LEFT)? TRUE:FALSE;
-squeeze_right = (sp_globals.pspecs->flags & SQUEEZE_RIGHT)? TRUE:FALSE;
-bbox_xmin = sp_globals.bbox_xmin_orus;
-bbox_xmax = sp_globals.bbox_xmax_orus;
-set_width = sp_globals.setwidth_orus;
-
-if (bbox_xmax > set_width)
-    out_on_right = TRUE;
-else
-    out_on_right = FALSE;
-if (bbox_xmin < 0)
-    out_on_left = TRUE;
-else
-    out_on_left = FALSE;
-bbox_width =bbox_xmax - bbox_xmin;
-
-/*
- * don't need X squeezing if:
- *     - X squeezing not enabled
- *     - bbox doesn't violate on left or right
- *     - left squeezing only is enabled and char isn't out on left
- *     - right squeezing only is enabled and char isn't out on right
- */
-
-if ((!squeeze_left && !squeeze_right) || 
-   (!out_on_right && !out_on_left) ||     
-   (squeeze_left && !squeeze_right && !out_on_left) ||
-   (squeeze_right && !squeeze_left && !out_on_right))
-    return FALSE;
-
-#if INCL_ISW
-if (sp_globals.import_setwidth_act)
-    {
-    /* if both isw and squeezing is going on - let the imported */
-    /* setwidth factor be factored in with the squeeze          */
-    isw_scale = compute_isw_scale();
-    /*sp_globals.setwidth_orus = sp_globals.imported_width;*/
-    }
-else
-    isw_scale = 0x10000L; /* 1 in 16.16 notation */
-#endif
-
-/* squeezing on left and right ?  */
-if (squeeze_left && squeeze_right)
-    {
-    /* calculate scale factor */
-    if (bbox_width < set_width)
-	*x_factor = 0x10000L; /* 1 in 16.16 notation */
-    else
-	*x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
-#if INCL_ISW
-    IMPORT_FACTOR
-#endif
-    /* calculate offset */
-    if (out_on_left) /* fall out on left ? */
-	*x_offset = -(fix31)*x_factor * (fix31)bbox_xmin;
-    /* fall out on right and I am shifting only ? */
-    else if (out_on_right && (*x_factor == 0x10000L))
-        *x_offset = -(fix31)*x_factor * (fix31)(bbox_xmax - set_width);
-    else
-	*x_offset = 0x0L; /* 0 in 16.16 notation */
-    }
-/* squeezing on left only and violates left */
-else if (squeeze_left)
-    {
-    if (bbox_width < set_width) /* will it fit if I shift it ? */
-	*x_factor = 0x10000L; /* 1 in 16.16 notation */
-    else if (out_on_right)
-	*x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
-    else
-	*x_factor = ((fix31)set_width<<16)/
-		    (fix31)(bbox_width - (bbox_xmax-set_width));
-#if INCL_ISW
-    IMPORT_FACTOR
-#endif
-    *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin;
-    }
-
-/* I must be squeezing on right, and violates right */
-else 
-    {
-    if (bbox_width < set_width) /* will it fit if I shift it ? */
-	{  /* just shift it left - it will fit in the bbox */
-        *x_factor = 0x10000L; /* 1 in 16.16 notation */
-#if INCL_ISW
-    IMPORT_FACTOR
-#endif
-        *x_offset = (fix31)-*x_factor * (fix31)bbox_xmin;
-	}
-    else if (out_on_left)
-	{
-        *x_factor = ((fix31)set_width<<16)/(fix31)bbox_width;
-#if INCL_ISW
-    IMPORT_FACTOR
-#endif
-	*x_offset = 0x0L; /* 0 in 16.16 notation */
-	}
-    else
-	{
-        *x_factor = ((fix31)set_width<<16)/(fix31)bbox_xmax;
-#if INCL_ISW
-    IMPORT_FACTOR
-#endif
-	*x_offset = 0x0L; /* 0 in 16.16 notation */
- 	}
-    }
-
-x_offset_pix = (fix15)(((*x_offset >> 16) * sp_globals.tcb0.xppo)
-		/ (1<<sp_globals.mpshift)); 
-
-if ((x_offset_pix >0) && (x_offset_pix < sp_globals.onepix))
-    x_offset_pix = sp_globals.onepix; 
-
-/* look for the first non-negative oru value, scale and add the offset    */
-/* to the corresponding pixel value - note that the pixel value           */
-/* is set in read_oru_table.                                              */
-
-/* look at all the X edges */
-for (i=0; i < (no_X_ctrl_zones+1); i++)
-    if (sp_plaid.orus[i] >= 0)
-        {
-        sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *x_factor) 
-		  +sp_globals.pixrnd + x_offset_pix) & sp_globals.pixfix;
-        break;
-        }
-
-return TRUE;
-}
-
-FUNCTION boolean calculate_y_scale(
-GDECL
-fix31   *top_scale, fix31 *bottom_scale,
-fix15  first_Y_zone,
-fix15  no_Y_ctrl_zones)
-/*
- * Called by sp_setup_pix_table() when squeezing is included
- * to determine whether Y scaling is necessary.  If it is, 
- * two scale factors are computed, one for above the baseline,
- * and one for below the basline.
- * This function returns a boolean value TRUE = Y squeezind is necessary, 
- * FALSE = no Y squeezing is necessary.
- */
-{
-boolean squeeze_top, squeeze_bottom;
-boolean out_on_top, out_on_bottom;
-fix15 	bbox_top, bbox_bottom;
-fix15 	bbox_height;
-fix15   i;
-
-/* set up some flags and common calculations */
-squeeze_top = (sp_globals.pspecs->flags & SQUEEZE_TOP)? TRUE:FALSE;
-squeeze_bottom = (sp_globals.pspecs->flags & SQUEEZE_BOTTOM)? TRUE:FALSE;
-bbox_top = sp_globals.bbox_ymax_orus;
-bbox_bottom = sp_globals.bbox_ymin_orus;
-bbox_height = bbox_top - bbox_bottom;
-
-if (bbox_top > EM_TOP)
-    out_on_top = TRUE;
-else
-    out_on_top = FALSE;
-
-if (bbox_bottom < EM_BOT)
-    out_on_bottom = TRUE;
-else
-    out_on_bottom = FALSE;
-
-/*
- * don't need Y squeezing if:
- *     - Y squeezing not enabled
- *     - bbox doesn't violate on top or bottom
- *     - top squeezing only is enabled and char isn't out on top
- *     - bottom squeezing only is enabled and char isn't out on bottom
- */
-if ((!squeeze_top && !squeeze_bottom) || 
-    (!out_on_top && !out_on_bottom) ||
-    (squeeze_top && !squeeze_bottom && !out_on_top) || 
-    (squeeze_bottom && !squeeze_top && !out_on_bottom)) 
-    return FALSE;
-
-if (squeeze_top && (bbox_top > EM_TOP))
-    *top_scale = ((fix31)EM_TOP << 16)/(fix31)(bbox_top);
-else
-    *top_scale = 0x10000L;  /* 1 in 16.16 fixed point */
-
-if (squeeze_bottom && (bbox_bottom < EM_BOT))
-    *bottom_scale = ((fix31)-(EM_BOT) << 16)/(fix31)-bbox_bottom;
-else
-    *bottom_scale = 0x10000L;
-
-if (sp_globals.squeezing_compound)
-    {
-    for (i=first_Y_zone; i < (first_Y_zone + no_Y_ctrl_zones + 1); i++)
-        {
-        if (sp_plaid.orus[i] >= 0)
-            sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *top_scale)
-                              +sp_globals.pixrnd) & sp_globals.pixfix;
-        else
-            sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], *bottom_scale)
-                              +sp_globals.pixrnd) & sp_globals.pixfix;
-        }
-    }
-return TRUE;
-}
-#endif
-
-FUNCTION static ufix8 FONTFAR *sp_setup_pix_table(
-GDECL
-ufix8 FONTFAR *pointer,   /* Pointer to first byte in control zone table */
-boolean short_form, /* TRUE if 1 byte from/to specification */
-fix15   no_X_ctrl_zones, /* Number of X control zones */
-fix15   no_Y_ctrl_zones) /* Number of Y control zones */
-/*
- * Called by plaid_tcb() to read the control zone table from the
- * character data in the font.
- * Sets up a table of pixel values for all controlled coordinates. 
- * Updates the pointer to the byte following the control zone
- * data.
- */
-{
-fix15    i, j, n;
-fix31    ppo;  
-#if INCL_SQUEEZING || INCL_ISW
-fix31    xppo0; /* top level pixels per oru */
-fix31    yppo0; /* top level pixels per oru */
-#endif
-ufix8    edge_org;
-ufix8    edge;
-ufix8    start_edge;
-ufix8    end_edge;
-ufix16   constr_org;
-fix15    constr_nr;
-fix15    zone_pix;
-fix31    whole_zone; /* non-transformed value of the first X zone */
-ufix16   tmpufix16;  /* in extended mode, macro uses secnd term */
-#if INCL_SQUEEZING
-fix31    x_scale;
-fix31	 y_top_scale, y_bottom_scale;
-fix31    x_offset;
-boolean  squeezed_y;
-fix15    setwidth_pix, em_top_pix, em_bot_pix;
-#endif
-
-#if INCL_ISW
-boolean  imported_width;
-fix31	 isw_scale;
-fix15    isw_setwidth_pix;
-#endif
-
-#if INCL_ISW || INCL_SQUEEZING
-boolean squeezed_x;
-#endif
-
-#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
-begin_ctrl_zones(no_X_ctrl_zones, no_Y_ctrl_zones);
-#endif                                                    
-
-
-edge_org = 0;
-constr_org = 0;
-sp_globals.rnd_xmin = 0;  /* initialize the error for chars with no zone */
-n = no_X_ctrl_zones;
-ppo = sp_globals.tcb.xppo;
-#if INCL_SQUEEZING || INCL_ISW
-xppo0 = sp_globals.tcb0.xppo;
-yppo0 = sp_globals.tcb0.yppo;
-squeezed_x = FALSE;
-#endif
-
-#if INCL_SQUEEZING
-squeezed_x = calculate_x_scale (&x_scale, &x_offset, no_X_ctrl_zones);
-squeezed_y = calculate_y_scale(&y_top_scale,&y_bottom_scale,(n+1),
-	     no_Y_ctrl_zones);
-#if INCL_ISW
-if (sp_globals.import_setwidth_act == TRUE)
-setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> 
-	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
-
-else
-#endif
-setwidth_pix = ((fix15)(((fix31)sp_globals.setwidth_orus * xppo0) >> 
-	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
-/* check for overflow */
-if (setwidth_pix < 0)
-	setwidth_pix = 0x7fff; /* set to maximum */
-em_bot_pix = ((fix15)(((fix31)EM_BOT * yppo0) >> 
-	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
-em_top_pix = ((fix15)(((fix31)EM_TOP * yppo0) >> 
-	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
-#endif
-
-#if INCL_ISW
-/* convert to pixels */
-isw_setwidth_pix = ((fix15)(((fix31)sp_globals.imported_width * xppo0) >> 
-	     sp_globals.mpshift) + sp_globals.pixrnd) & sp_globals.pixfix;
-/* check for overflow */
-if (isw_setwidth_pix < 0)
-	isw_setwidth_pix = 0x7fff; /* set to maximum */
-if (!squeezed_x && ((imported_width = sp_globals.import_setwidth_act) == TRUE))
-    {
-    isw_scale = compute_isw_scale();
-
-    /* look for the first non-negative oru value, scale and add the offset    */
-    /* to the corresponding pixel value - note that the pixel value           */
-    /* is set in read_oru_table.                                              */
-    
-    /* look at all the X edges */
-        for (i=0; i < (no_X_ctrl_zones+1); i++)
-        if (sp_plaid.orus[i] >= 0)
-           {
-           sp_plaid.pix[i] = (SQUEEZE_MULT(sp_plaid.pix[i], isw_scale)
-                  +sp_globals.pixrnd) & sp_globals.pixfix;
-           break;
-           }
-
-    }
-#endif
-
-for (i = 0; ; i++)               /* For X and Y control zones... */
-    {
-    for (j = 0; j < n; j++)      /* For each zone in X or Y... */
-        {
-        if (short_form)          /* 1 byte from/to specification? */
-            {
-            edge = NEXT_BYTE(pointer); /* Read packed from/to spec */
-            start_edge = edge_org + (edge & 0x0f); /* Extract start edge */
-            end_edge = edge_org + (edge >> 4); /* Extract end edge */
-            }
-        else                     /* 2 byte from/to specification? */
-            {
-            start_edge = edge_org + NEXT_BYTE(pointer); /* Read start edge */
-            end_edge = edge_org + NEXT_BYTE(pointer); /* read end edge */
-            }
-        constr_nr = constr_org +
-            NEXT_BYTES(pointer, tmpufix16); /* Read constraint number */ 
-#if INCL_SQUEEZING
-        if (i == 0 && squeezed_x)
-	    calculate_x_pix(start_edge, end_edge, constr_nr,
-                            x_scale, x_offset, ppo, setwidth_pix);
-	else if (i == 1 && squeezed_y)
-	    calculate_y_pix(start_edge, end_edge,constr_nr,
- 		y_top_scale, y_bottom_scale, ppo, em_top_pix, em_bot_pix);
-	else
-	{
-#endif
-#if INCL_ISW
-	if (i==0 && imported_width)
-            calculate_x_pix(start_edge, end_edge, constr_nr,
-                            isw_scale, 0,  ppo, isw_setwidth_pix);
-	else
-	{
-#endif
-        if (!sp_globals.c_act[constr_nr])   /* Constraint inactive? */
-            {
-            zone_pix = ((fix15)((((fix31)sp_plaid.orus[end_edge] -
-			(fix31)sp_plaid.orus[start_edge]) * ppo) /
-			(1<<sp_globals.mpshift)) + sp_globals.pixrnd) &
-			sp_globals.pixfix;
-            if ((ABS(zone_pix)) >= sp_globals.c_pix[constr_nr])
-                goto L1;
-            }
-        zone_pix = sp_globals.c_pix[constr_nr]; /* Use zone size from constr table */
-        if (start_edge > end_edge) /* sp_plaid.orus[start_edge] > sp_plaid.orus[end_edge]? */
-            {
-            zone_pix = -zone_pix; /* Use negatve zone size */
-            }
-    L1:
-                        /* inter-character spacing fix */
-        if ((j == 0) && (i == 0))      /* if this is the 1st X zone, save rounding error */
-            {                          /*  get the non-xformed - xformed zone, in right direction */
-            whole_zone = (((fix31)sp_plaid.orus[end_edge] -
-			(fix31)sp_plaid.orus[start_edge]) *
-			ppo) / (1<<sp_globals.mpshift);
-            sp_globals.rnd_xmin = whole_zone - zone_pix;
-            }
-        sp_plaid.pix[end_edge] = sp_plaid.pix[start_edge] + zone_pix; /* Insert end pixels */
-#if INCL_SQUEEZING
-        if (i == 0)  /* in the x direction */
-            { /* brute force squeeze */
-            if ((sp_globals.pspecs->flags & SQUEEZE_LEFT) && 
-                (sp_plaid.pix[end_edge] < 0))
-                sp_plaid.pix[end_edge] = 0;
-            if ((sp_globals.pspecs->flags & SQUEEZE_RIGHT) && 
-                (sp_plaid.pix[end_edge] > setwidth_pix))
-                sp_plaid.pix[end_edge] = setwidth_pix;
-            }
-        if (i == 1) /* in the y direction */
-            {  /* brute force squeeze */
-            if ((sp_globals.pspecs->flags & SQUEEZE_TOP) && 
-                (sp_plaid.pix[end_edge] > em_top_pix))
-                sp_plaid.pix[end_edge] = em_top_pix;
-            if ((sp_globals.pspecs->flags & SQUEEZE_BOTTOM) &&
-                (sp_plaid.pix[end_edge] < em_bot_pix))
-                sp_plaid.pix[end_edge] = em_bot_pix;
-            }
-#endif
-#if INCL_SQUEEZING
-	}
-#endif
-#if INCL_ISW
-	}
-#endif
-#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
-        record_ctrl_zone(
-            (fix31)sp_plaid.pix[start_edge] << (16 - sp_globals.pixshift), 
-            (fix31)sp_plaid.pix[end_edge] << (16 - sp_globals.pixshift), 
-            (fix15)(constr_nr - constr_org));
-#endif
-        }
-    if (i)                       /* Y pixels done? */
-        break;                                          
-    edge_org = sp_globals.Y_edge_org;       /* Prepare to process Y ctrl zones */
-    constr_org = sp_globals.Y_constr_org;
-    n = no_Y_ctrl_zones;                      
-    ppo = sp_globals.tcb.yppo;                            
-    }
-
-#if DEBUG
-printf("\nX PIX TABLE\n");
-n = no_X_ctrl_zones + 1;
-for (i = 0; i < n; i++)
-    printf("%2d %6.1f\n", i, (real)sp_plaid.pix[i] / (real)sp_globals.onepix);
-printf("\nY PIX TABLE\n");
-n = no_Y_ctrl_zones + 1;
-for (i = 0; i < n; i++)
-    {
-    j = i + no_X_ctrl_zones + 1;
-    printf("%2d %6.1f\n", i, (real)sp_plaid.pix[j] / (real)sp_globals.onepix);
-    }
-#endif
-
-return pointer;
-}
-
-
-FUNCTION static ufix8 FONTFAR *sp_setup_int_table(
-GDECL
-ufix8 FONTFAR *pointer,   /* Pointer to first byte in interpolation zone table */
-fix15  no_X_int_zones, /* Number of X interpolation zones */
-fix15  no_Y_int_zones) /* Number of X interpolation zones */
-/*
- * Called by plaid_tcb() to read the interpolation zone table from the
- * character data in the font. 
- * Sets up a table of interpolation coefficients with one entry for
- * every X or Y interpolation zone.
- * Updates the pointer to the byte following the interpolation zone
- * data.
- */
-{
-fix15    i, j, k, l, n;
-ufix8    format;
-ufix8    format_copy;
-ufix8    tmpufix8;
-fix15    start_orus = 0;
-ufix8    edge_org;
-ufix8    edge;
-ufix16   adj_factor;
-fix15    adj_orus;
-fix15    end_orus = 0;
-fix31    zone_orus;
-fix15    start_pix = 0;
-fix15    end_pix = 0;
-
-
-#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
-begin_int_zones(no_X_int_zones, no_Y_int_zones);
-#endif
-
-i = 0;
-edge_org = 0;
-n = no_X_int_zones;
-for (j = 0; ; j++)
-    {
-    for (k = 0; k < n; k++)
-        {
-        format = NEXT_BYTE(pointer);
-        if (format & BIT7)       /* Short start/end point spec? */
-            {
-            tmpufix8 = NEXT_BYTE(pointer);
-            edge = edge_org + (tmpufix8 & 0xf);
-            start_orus = sp_plaid.orus[edge];
-            start_pix = sp_plaid.pix[edge];
-            edge = edge_org + (tmpufix8 >> 4);
-            end_orus = sp_plaid.orus[edge];
-            end_pix = sp_plaid.pix[edge];
-            }
-        else                     /* Standard start and end point spec? */
-            {
-            format_copy = format;
-            for (l = 0; ; l++)   /* Loop for start and end point */
-                {
-                switch (format_copy & 0x7) /* Decode start/end point format */
-                    {
-
-                case 0:          /* Index to control edge */
-                    edge = edge_org + NEXT_BYTE(pointer);
-                    end_orus = sp_plaid.orus[edge];
-                    end_pix = sp_plaid.pix[edge];
-                    break;
-
-                case 1:          /* 1 byte fractional distance to next edge */
-                    adj_factor =  0xffff & NEXT_BYTE(pointer) << 8;
-                    goto L1;
-
-
-                case 2:          /* 2 byte fractional distance to next edge */
-		    adj_factor = 0xffff & NEXT_WORD(pointer);
-                L1: edge = edge_org + NEXT_BYTE(pointer);
-                    end_orus = sp_plaid.orus[edge] +
-                        ((((fix31)sp_plaid.orus[edge + 1] - (fix31)sp_plaid.orus[edge]) * 
-                        (ufix32)adj_factor + (fix31)32768) >> 16);
-                    end_pix = sp_plaid.pix[edge] +
-                        ((((fix31)sp_plaid.pix[edge + 1] - (fix31)sp_plaid.pix[edge]) * 
-                        (ufix32)adj_factor + (fix31)32768) >> 16);
-                    break;
-
-                case 3:          /* 1 byte delta orus before first edge */
-                    adj_orus = -(fix15)NEXT_BYTE(pointer); 
-                    goto L2;
-
-                case 4:          /* 2 byte delta orus before first edge */
-                    adj_orus = -NEXT_WORD(pointer);
-                L2: edge = edge_org;
-                    goto L4;
-
-                case 5:          /* 1 byte delta orus after last edge */
-                    adj_orus = (fix15)NEXT_BYTE(pointer);
-                    goto L3;
-
-                case 6:          /* 2 byte delta orus after last edge */
-                    adj_orus = NEXT_WORD(pointer);
-                L3: edge = j? sp_globals.Y_edge_org + sp_globals.no_Y_orus - 1: sp_globals.no_X_orus - 1;
-                L4: end_orus = sp_plaid.orus[edge] + adj_orus;
-                    end_pix = sp_plaid.pix[edge] + 
-                        (((fix31)adj_orus * (fix31)(j? sp_globals.tcb.yppo: sp_globals.tcb.xppo) + 
-                          sp_globals.mprnd) / (1<<sp_globals.mpshift));
-                    break;
-
-                    }
-
-                if (l)           /* Second time round loop? */
-                    break;
-                format_copy >>= 3; /* Adj format to decode end point format */
-                start_orus = end_orus; /* Save start point oru value */
-                start_pix = end_pix; /* Save start point pixel value */
-                }
-            }
-#if INCL_PLAID_OUT               /* Plaid data monitoring included? */
-        record_int_zone(
-            (fix31)start_pix << (16 - sp_globals.pixshift), 
-            (fix31)end_pix << (16 - sp_globals.pixshift));
-#endif
-        zone_orus = (fix31)end_orus - (fix31)start_orus;
-        sp_plaid.mult[i] = ((((fix31)end_pix - (fix31)start_pix) << sp_globals.mpshift) + 
-                   (zone_orus / 2)) / zone_orus;
-        sp_plaid.offset[i] = 
-            (((((fix31)start_pix + (fix31)end_pix) << sp_globals.mpshift) - 
-              ((fix31)sp_plaid.mult[i] * ((fix31)start_orus + (fix31)end_orus))) / 2) + 
-            sp_globals.mprnd;
-        i++;
-        }
-    if (j)                       /* Finished? */
-        break;
-    edge_org = sp_globals.Y_edge_org;       /* Prepare to process Y ctrl zones */
-    n = no_Y_int_zones;
-    }
-
-#if DEBUG
-printf("\nX INT TABLE\n");
-n = no_X_int_zones;
-for (i = 0; i < n; i++)
-    {
-    printf("%2d %7.4f %7.4f\n", i, 
-        (real)sp_plaid.mult[i] / (real)(1 << sp_globals.multshift), 
-        (real)sp_plaid.offset[i] / (real)(1 << sp_globals.multshift));
-    }
-printf("\nY INT TABLE\n");
-n = no_Y_int_zones;
-for (i = 0; i < n; i++)
-    {
-    j = i + no_X_int_zones;
-    printf("%2d %7.4f %7.4f\n", i, 
-        (real)sp_plaid.mult[j] / (real)(1 << sp_globals.multshift), 
-        (real)sp_plaid.offset[j] / (real)(1 << sp_globals.multshift));
-    }
-#endif
-
-return pointer;
-}
-#if INCL_ISW
-FUNCTION fix31 compute_isw_scale()
-GDECL
-{
-fix31 isw_scale;
-	
-if (sp_globals.setwidth_orus == 0)
-    isw_scale = 0x00010000;
-else
-    isw_scale = ((fix31)sp_globals.imported_width << 16)/
-                 (fix31)sp_globals.setwidth_orus;
-return isw_scale;
-}
-#endif