Merge remote-tracking branch 'origin/released'

* origin/released:
  Changed file permissions
  dos -> unix

Conflicts:
	libX11/include/X11/Xregion.h
	libX11/src/ConvSel.c
	libX11/src/CrGlCur.c
	libX11/src/CrWindow.c
	libX11/src/GetDflt.c
	libX11/src/StrKeysym.c
	libX11/src/Window.c
	libX11/src/xkb/XKBBind.c
	libX11/src/xkb/XKBGetMap.c
	libX11/src/xkb/XKBSetGeom.c
	libX11/src/xkb/XKBUse.c
	libX11/src/xlibi18n/XimProto.h
	libX11/src/xlibi18n/lcDynamic.c
	libXdmcp/Key.c
	libXdmcp/Write.c
	libxcb/src/xcb_windefs.h
	xkbcomp/keycodes.c
	xkbcomp/xkbpath.c
	xorg-server/hw/xwin/glx/winpriv.h
	xorg-server/xkeyboard-config/rules/bin/ml1_s.sh
	xorg-server/xkeyboard-config/rules/bin/ml1v1_s.sh
	xorg-server/xkeyboard-config/rules/bin/ml1v_s.sh
	xorg-server/xkeyboard-config/rules/bin/ml_s.sh
	xorg-server/xkeyboard-config/rules/bin/mln_s.sh
	xorg-server/xkeyboard-config/rules/bin/mlnvn_s.sh
	xorg-server/xkeyboard-config/rules/bin/mlv_s.sh
	xorg-server/xkeyboard-config/rules/compat/.gitignore

1 files changed, 1253 insertions, 1253 deletions

diff --git a/libxcb/doc/xcb.doxygen.in b/libxcb/doc/xcb.doxygen.in
index d674cbab1..58aa07630 100644
--- a/libxcb/doc/xcb.doxygen.in
+++ b/libxcb/doc/xcb.doxygen.in
@@ -1,1253 +1,1253 @@
-# Doxyfile 1.5.0

-

-# This file describes the settings to be used by the documentation system

-# doxygen (www.doxygen.org) for a project

-#

-# All text after a hash (#) is considered a comment and will be ignored

-# The format is:

-#       TAG = value [value, ...]

-# For lists items can also be appended using:

-#       TAG += value [value, ...]

-# Values that contain spaces should be placed between quotes (" ")

-

-#---------------------------------------------------------------------------

-# Project related configuration options

-#---------------------------------------------------------------------------

-

-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

-# by quotes) that should identify the project.

-

-PROJECT_NAME           = "XCB"

-

-# The PROJECT_NUMBER tag can be used to enter a project or revision number.

-# This could be handy for archiving the generated documentation or

-# if some version control system is used.

-

-PROJECT_NUMBER         = @VERSION@

-

-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

-# base path where the generated documentation will be put.

-# If a relative path is entered, it will be relative to the location

-# where doxygen was started. If left blank the current directory will be used.

-

-OUTPUT_DIRECTORY       = @top_builddir@/doc

-

-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

-# 4096 sub-directories (in 2 levels) under the output directory of each output

-# format and will distribute the generated files over these directories.

-# Enabling this option can be useful when feeding doxygen a huge amount of

-# source files, where putting all generated files in the same directory would

-# otherwise cause performance problems for the file system.

-

-CREATE_SUBDIRS         = NO

-

-# The OUTPUT_LANGUAGE tag is used to specify the language in which all

-# documentation generated by doxygen is written. Doxygen will use this

-# information to generate all constant output in the proper language.

-# The default language is English, other supported languages are:

-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

-# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,

-# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,

-# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,

-# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.

-

-OUTPUT_LANGUAGE        = English

-

-# This tag can be used to specify the encoding used in the generated output.

-# The encoding is not always determined by the language that is chosen,

-# but also whether or not the output is meant for Windows or non-Windows users.

-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES

-# forces the Windows encoding (this is the default for the Windows binary),

-# whereas setting the tag to NO uses a Unix-style encoding (the default for

-# all platforms other than Windows).

-

-USE_WINDOWS_ENCODING   = NO

-

-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

-# include brief member descriptions after the members that are listed in

-# the file and class documentation (similar to JavaDoc).

-# Set to NO to disable this.

-

-BRIEF_MEMBER_DESC      = YES

-

-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

-# the brief description of a member or function before the detailed description.

-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

-# brief descriptions will be completely suppressed.

-

-REPEAT_BRIEF           = YES

-

-# This tag implements a quasi-intelligent brief description abbreviator

-# that is used to form the text in various listings. Each string

-# in this list, if found as the leading text of the brief description, will be

-# stripped from the text and the result after processing the whole list, is

-# used as the annotated text. Otherwise, the brief description is used as-is.

-# If left blank, the following values are used ("$name" is automatically

-# replaced with the name of the entity): "The $name class" "The $name widget"

-# "The $name file" "is" "provides" "specifies" "contains"

-# "represents" "a" "an" "the"

-

-ABBREVIATE_BRIEF       =

-

-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

-# Doxygen will generate a detailed section even if there is only a brief

-# description.

-

-ALWAYS_DETAILED_SEC    = NO

-

-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

-# inherited members of a class in the documentation of that class as if those

-# members were ordinary class members. Constructors, destructors and assignment

-# operators of the base classes will not be shown.

-

-INLINE_INHERITED_MEMB  = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

-# path before files name in the file list and in the header files. If set

-# to NO the shortest path that makes the file name unique will be used.

-

-FULL_PATH_NAMES        = NO

-

-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

-# can be used to strip a user-defined part of the path. Stripping is

-# only done if one of the specified strings matches the left-hand part of

-# the path. The tag can be used to show relative paths in the file list.

-# If left blank the directory from which doxygen is run is used as the

-# path to strip.

-

-STRIP_FROM_PATH        =

-

-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

-# the path mentioned in the documentation of a class, which tells

-# the reader which header file to include in order to use a class.

-# If left blank only the name of the header file containing the class

-# definition is used. Otherwise one should specify the include paths that

-# are normally passed to the compiler using the -I flag.

-

-STRIP_FROM_INC_PATH    =

-

-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

-# (but less readable) file names. This can be useful is your file systems

-# doesn't support long names like on DOS, Mac, or CD-ROM.

-

-SHORT_NAMES            = NO

-

-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

-# will interpret the first line (until the first dot) of a JavaDoc-style

-# comment as the brief description. If set to NO, the JavaDoc

-# comments will behave just like the Qt-style comments (thus requiring an

-# explicit @brief command for a brief description.

-

-JAVADOC_AUTOBRIEF      = NO

-

-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

-# treat a multi-line C++ special comment block (i.e. a block of //! or ///

-# comments) as a brief description. This used to be the default behaviour.

-# The new default is to treat a multi-line C++ comment block as a detailed

-# description. Set this tag to YES if you prefer the old behaviour instead.

-

-MULTILINE_CPP_IS_BRIEF = NO

-

-# If the DETAILS_AT_TOP tag is set to YES then Doxygen

-# will output the detailed description near the top, like JavaDoc.

-# If set to NO, the detailed description appears after the member

-# documentation.

-

-DETAILS_AT_TOP         = NO

-

-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

-# member inherits the documentation from any documented member that it

-# re-implements.

-

-INHERIT_DOCS           = YES

-

-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

-# a new page for each member. If set to NO, the documentation of a member will

-# be part of the file/class/namespace that contains it.

-

-SEPARATE_MEMBER_PAGES  = NO

-

-# The TAB_SIZE tag can be used to set the number of spaces in a tab.

-# Doxygen uses this value to replace tabs by spaces in code fragments.

-

-TAB_SIZE               = 8

-

-# This tag can be used to specify a number of aliases that acts

-# as commands in the documentation. An alias has the form "name=value".

-# For example adding "sideeffect=\par Side Effects:\n" will allow you to

-# put the command \sideeffect (or @sideeffect) in the documentation, which

-# will result in a user-defined paragraph with heading "Side Effects:".

-# You can put \n's in the value part of an alias to insert newlines.

-

-ALIASES                =

-

-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

-# sources only. Doxygen will then generate output that is more tailored for C.

-# For instance, some of the names that are used will be different. The list

-# of all members will be omitted, etc.

-

-OPTIMIZE_OUTPUT_FOR_C  = YES

-

-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

-# sources only. Doxygen will then generate output that is more tailored for Java.

-# For instance, namespaces will be presented as packages, qualified scopes

-# will look different, etc.

-

-OPTIMIZE_OUTPUT_JAVA   = NO

-

-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to

-# include (a tag file for) the STL sources as input, then you should

-# set this tag to YES in order to let doxygen match functions declarations and

-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

-# func(std::string) {}). This also make the inheritance and collaboration

-# diagrams that involve STL classes more complete and accurate.

-

-BUILTIN_STL_SUPPORT    = NO

-

-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

-# tag is set to YES, then doxygen will reuse the documentation of the first

-# member in the group (if any) for the other members of the group. By default

-# all members of a group must be documented explicitly.

-

-DISTRIBUTE_GROUP_DOC   = NO

-

-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

-# the same type (for instance a group of public functions) to be put as a

-# subgroup of that type (e.g. under the Public Functions section). Set it to

-# NO to prevent subgrouping. Alternatively, this can be done per class using

-# the \nosubgrouping command.

-

-SUBGROUPING            = YES

-

-#---------------------------------------------------------------------------

-# Build related configuration options

-#---------------------------------------------------------------------------

-

-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

-# documentation are documented, even if no documentation was available.

-# Private class members and static file members will be hidden unless

-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

-

-EXTRACT_ALL            = NO

-

-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

-# will be included in the documentation.

-

-EXTRACT_PRIVATE        = NO

-

-# If the EXTRACT_STATIC tag is set to YES all static members of a file

-# will be included in the documentation.

-

-EXTRACT_STATIC         = NO

-

-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

-# defined locally in source files will be included in the documentation.

-# If set to NO only classes defined in header files are included.

-

-EXTRACT_LOCAL_CLASSES  = YES

-

-# This flag is only useful for Objective-C code. When set to YES local

-# methods, which are defined in the implementation section but not in

-# the interface are included in the documentation.

-# If set to NO (the default) only methods in the interface are included.

-

-EXTRACT_LOCAL_METHODS  = NO

-

-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

-# undocumented members of documented classes, files or namespaces.

-# If set to NO (the default) these members will be included in the

-# various overviews, but no documentation section is generated.

-# This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_MEMBERS     = NO

-

-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

-# undocumented classes that are normally visible in the class hierarchy.

-# If set to NO (the default) these classes will be included in the various

-# overviews. This option has no effect if EXTRACT_ALL is enabled.

-

-HIDE_UNDOC_CLASSES     = NO

-

-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

-# friend (class|struct|union) declarations.

-# If set to NO (the default) these declarations will be included in the

-# documentation.

-

-HIDE_FRIEND_COMPOUNDS  = NO

-

-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

-# documentation blocks found inside the body of a function.

-# If set to NO (the default) these blocks will be appended to the

-# function's detailed documentation block.

-

-HIDE_IN_BODY_DOCS      = NO

-

-# The INTERNAL_DOCS tag determines if documentation

-# that is typed after a \internal command is included. If the tag is set

-# to NO (the default) then the documentation will be excluded.

-# Set it to YES to include the internal documentation.

-

-INTERNAL_DOCS          = NO

-

-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

-# file names in lower-case letters. If set to YES upper-case letters are also

-# allowed. This is useful if you have classes or files whose names only differ

-# in case and if your file system supports case sensitive file names. Windows

-# and Mac users are advised to set this option to NO.

-

-CASE_SENSE_NAMES       = YES

-

-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

-# will show members with their full class and namespace scopes in the

-# documentation. If set to YES the scope will be hidden.

-

-HIDE_SCOPE_NAMES       = NO

-

-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

-# will put a list of the files that are included by a file in the documentation

-# of that file.

-

-SHOW_INCLUDE_FILES     = YES

-

-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

-# is inserted in the documentation for inline members.

-

-INLINE_INFO            = YES

-

-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

-# will sort the (detailed) documentation of file and class members

-# alphabetically by member name. If set to NO the members will appear in

-# declaration order.

-

-SORT_MEMBER_DOCS       = YES

-

-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

-# brief documentation of file, namespace and class members alphabetically

-# by member name. If set to NO (the default) the members will appear in

-# declaration order.

-

-SORT_BRIEF_DOCS        = NO

-

-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

-# sorted by fully-qualified names, including namespaces. If set to

-# NO (the default), the class list will be sorted only by class name,

-# not including the namespace part.

-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

-# Note: This option applies only to the class list, not to the

-# alphabetical list.

-

-SORT_BY_SCOPE_NAME     = NO

-

-# The GENERATE_TODOLIST tag can be used to enable (YES) or

-# disable (NO) the todo list. This list is created by putting \todo

-# commands in the documentation.

-

-GENERATE_TODOLIST      = YES

-

-# The GENERATE_TESTLIST tag can be used to enable (YES) or

-# disable (NO) the test list. This list is created by putting \test

-# commands in the documentation.

-

-GENERATE_TESTLIST      = YES

-

-# The GENERATE_BUGLIST tag can be used to enable (YES) or

-# disable (NO) the bug list. This list is created by putting \bug

-# commands in the documentation.

-

-GENERATE_BUGLIST       = YES

-

-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

-# disable (NO) the deprecated list. This list is created by putting

-# \deprecated commands in the documentation.

-

-GENERATE_DEPRECATEDLIST= YES

-

-# The ENABLED_SECTIONS tag can be used to enable conditional

-# documentation sections, marked by \if sectionname ... \endif.

-

-ENABLED_SECTIONS       =

-

-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

-# the initial value of a variable or define consists of for it to appear in

-# the documentation. If the initializer consists of more lines than specified

-# here it will be hidden. Use a value of 0 to hide initializers completely.

-# The appearance of the initializer of individual variables and defines in the

-# documentation can be controlled using \showinitializer or \hideinitializer

-# command in the documentation regardless of this setting.

-

-MAX_INITIALIZER_LINES  = 30

-

-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

-# at the bottom of the documentation of classes and structs. If set to YES the

-# list will mention the files that were used to generate the documentation.

-

-SHOW_USED_FILES        = YES

-

-# If the sources in your project are distributed over multiple directories

-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

-# in the documentation. The default is NO.

-

-SHOW_DIRECTORIES       = NO

-

-# The FILE_VERSION_FILTER tag can be used to specify a program or script that

-# doxygen should invoke to get the current version for each file (typically from the

-# version control system). Doxygen will invoke the program by executing (via

-# popen()) the command <command> <input-file>, where <command> is the value of

-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

-# provided by doxygen. Whatever the program writes to standard output

-# is used as the file version. See the manual for examples.

-

-FILE_VERSION_FILTER    =

-

-#---------------------------------------------------------------------------

-# configuration options related to warning and progress messages

-#---------------------------------------------------------------------------

-

-# The QUIET tag can be used to turn on/off the messages that are generated

-# by doxygen. Possible values are YES and NO. If left blank NO is used.

-

-QUIET                  = YES

-

-# The WARNINGS tag can be used to turn on/off the warning messages that are

-# generated by doxygen. Possible values are YES and NO. If left blank

-# NO is used.

-

-WARNINGS               = YES

-

-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

-# automatically be disabled.

-

-# XXX: In the future this should be turned on. For now it generates too much noise.

-WARN_IF_UNDOCUMENTED   = NO

-

-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

-# potential errors in the documentation, such as not documenting some

-# parameters in a documented function, or documenting parameters that

-# don't exist or using markup commands wrongly.

-

-WARN_IF_DOC_ERROR      = YES

-

-# This WARN_NO_PARAMDOC option can be abled to get warnings for

-# functions that are documented, but have no documentation for their parameters

-# or return value. If set to NO (the default) doxygen will only warn about

-# wrong or incomplete parameter documentation, but not about the absence of

-# documentation.

-

-WARN_NO_PARAMDOC       = YES

-

-# The WARN_FORMAT tag determines the format of the warning messages that

-# doxygen can produce. The string should contain the $file, $line, and $text

-# tags, which will be replaced by the file and line number from which the

-# warning originated and the warning text. Optionally the format may contain

-# $version, which will be replaced by the version of the file (if it could

-# be obtained via FILE_VERSION_FILTER)

-

-WARN_FORMAT            = "$file:$line: $text"

-

-# The WARN_LOGFILE tag can be used to specify a file to which warning

-# and error messages should be written. If left blank the output is written

-# to stderr.

-

-WARN_LOGFILE           =

-

-#---------------------------------------------------------------------------

-# configuration options related to the input files

-#---------------------------------------------------------------------------

-

-# The INPUT tag can be used to specify the files and/or directories that contain

-# documented source files. You may enter file names like "myfile.cpp" or

-# directories like "/usr/src/myproject". Separate the files or directories

-# with spaces.

-

-INPUT                  = @top_srcdir@/src @top_builddir@/src

-

-# If the value of the INPUT tag contains directories, you can use the

-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank the following patterns are tested:

-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py

-

-FILE_PATTERNS          =

-

-# The RECURSIVE tag can be used to turn specify whether or not subdirectories

-# should be searched for input files as well. Possible values are YES and NO.

-# If left blank NO is used.

-

-RECURSIVE              = NO

-

-# The EXCLUDE tag can be used to specify files and/or directories that should

-# excluded from the INPUT source files. This way you can easily exclude a

-# subdirectory from a directory tree whose root is specified with the INPUT tag.

-

-EXCLUDE                =

-

-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

-# directories that are symbolic links (a Unix filesystem feature) are excluded

-# from the input.

-

-EXCLUDE_SYMLINKS       = NO

-

-# If the value of the INPUT tag contains directories, you can use the

-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

-# certain files from those directories. Note that the wildcards are matched

-# against the file with absolute path, so to exclude all test directories

-# for example use the pattern */test/*

-

-EXCLUDE_PATTERNS       =

-

-# The EXAMPLE_PATH tag can be used to specify one or more files or

-# directories that contain example code fragments that are included (see

-# the \include command).

-

-EXAMPLE_PATH           =

-

-# If the value of the EXAMPLE_PATH tag contains directories, you can use the

-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

-# and *.h) to filter out the source-files in the directories. If left

-# blank all files are included.

-

-EXAMPLE_PATTERNS       =

-

-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

-# searched for input files to be used with the \include or \dontinclude

-# commands irrespective of the value of the RECURSIVE tag.

-# Possible values are YES and NO. If left blank NO is used.

-

-EXAMPLE_RECURSIVE      = NO

-

-# The IMAGE_PATH tag can be used to specify one or more files or

-# directories that contain image that are included in the documentation (see

-# the \image command).

-

-IMAGE_PATH             =

-

-# The INPUT_FILTER tag can be used to specify a program that doxygen should

-# invoke to filter for each input file. Doxygen will invoke the filter program

-# by executing (via popen()) the command <filter> <input-file>, where <filter>

-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

-# input file. Doxygen will then use the output that the filter program writes

-# to standard output.  If FILTER_PATTERNS is specified, this tag will be

-# ignored.

-

-INPUT_FILTER           =

-

-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

-# basis.  Doxygen will compare the file name with each pattern and apply the

-# filter if there is a match.  The filters are a list of the form:

-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

-# is applied to all files.

-

-FILTER_PATTERNS        =

-

-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

-# INPUT_FILTER) will be used to filter the input files when producing source

-# files to browse (i.e. when SOURCE_BROWSER is set to YES).

-

-FILTER_SOURCE_FILES    = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to source browsing

-#---------------------------------------------------------------------------

-

-# If the SOURCE_BROWSER tag is set to YES then a list of source files will

-# be generated. Documented entities will be cross-referenced with these sources.

-# Note: To get rid of all source code in the generated output, make sure also

-# VERBATIM_HEADERS is set to NO.

-

-SOURCE_BROWSER         = NO

-

-# Setting the INLINE_SOURCES tag to YES will include the body

-# of functions and classes directly in the documentation.

-

-INLINE_SOURCES         = NO

-

-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

-# doxygen to hide any special comment blocks from generated source code

-# fragments. Normal C and C++ comments will always remain visible.

-

-STRIP_CODE_COMMENTS    = YES

-

-# If the REFERENCED_BY_RELATION tag is set to YES (the default)

-# then for each documented function all documented

-# functions referencing it will be listed.

-

-REFERENCED_BY_RELATION = YES

-

-# If the REFERENCES_RELATION tag is set to YES (the default)

-# then for each documented function all documented entities

-# called/used by that function will be listed.

-

-REFERENCES_RELATION    = YES

-

-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

-# link to the source code.  Otherwise they will link to the documentstion.

-

-REFERENCES_LINK_SOURCE = YES

-

-# If the USE_HTAGS tag is set to YES then the references to source code

-# will point to the HTML generated by the htags(1) tool instead of doxygen

-# built-in source browser. The htags tool is part of GNU's global source

-# tagging system (see http://www.gnu.org/software/global/global.html). You

-# will need version 4.8.6 or higher.

-

-USE_HTAGS              = NO

-

-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

-# will generate a verbatim copy of the header file for each class for

-# which an include is specified. Set to NO to disable this.

-

-VERBATIM_HEADERS       = YES

-

-#---------------------------------------------------------------------------

-# configuration options related to the alphabetical class index

-#---------------------------------------------------------------------------

-

-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

-# of all compounds will be generated. Enable this if the project

-# contains a lot of classes, structs, unions or interfaces.

-

-ALPHABETICAL_INDEX     = NO

-

-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

-# in which this list will be split (can be a number in the range [1..20])

-

-COLS_IN_ALPHA_INDEX    = 5

-

-# In case all classes in a project start with a common prefix, all

-# classes will be put under the same header in the alphabetical index.

-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

-# should be ignored while generating the index headers.

-

-IGNORE_PREFIX          =

-

-#---------------------------------------------------------------------------

-# configuration options related to the HTML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

-# generate HTML output.

-

-GENERATE_HTML          = YES

-

-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `html' will be used as the default path.

-

-HTML_OUTPUT            = manual

-

-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

-# doxygen will generate files with .html extension.

-

-HTML_FILE_EXTENSION    = .html

-

-# The HTML_HEADER tag can be used to specify a personal HTML header for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard header.

-

-HTML_HEADER            =

-

-# The HTML_FOOTER tag can be used to specify a personal HTML footer for

-# each generated HTML page. If it is left blank doxygen will generate a

-# standard footer.

-

-HTML_FOOTER            =

-

-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

-# style sheet that is used by each HTML page. It can be used to

-# fine-tune the look of the HTML output. If the tag is left blank doxygen

-# will generate a default style sheet. Note that doxygen will try to copy

-# the style sheet file to the HTML output directory, so don't put your own

-# stylesheet in the HTML output directory as well, or it will be erased!

-

-HTML_STYLESHEET        =

-

-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

-# files or namespaces will be aligned in HTML using tables. If set to

-# NO a bullet list will be used.

-

-HTML_ALIGN_MEMBERS     = YES

-

-# If the GENERATE_HTMLHELP tag is set to YES, additional index files

-# will be generated that can be used as input for tools like the

-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)

-# of the generated HTML documentation.

-

-GENERATE_HTMLHELP      = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

-# be used to specify the file name of the resulting .chm file. You

-# can add a path in front of the file if the result should not be

-# written to the html output directory.

-

-CHM_FILE               =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

-# be used to specify the location (absolute path including file name) of

-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

-# the HTML help compiler on the generated index.hhp.

-

-HHC_LOCATION           =

-

-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

-# controls if a separate .chi index file is generated (YES) or that

-# it should be included in the master .chm file (NO).

-

-GENERATE_CHI           = NO

-

-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

-# controls whether a binary table of contents is generated (YES) or a

-# normal table of contents (NO) in the .chm file.

-

-BINARY_TOC             = NO

-

-# The TOC_EXPAND flag can be set to YES to add extra items for group members

-# to the contents of the HTML help documentation and to the tree view.

-

-TOC_EXPAND             = NO

-

-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

-# top of each HTML page. The value NO (the default) enables the index and

-# the value YES disables it.

-

-DISABLE_INDEX          = NO

-

-# This tag can be used to set the number of enum values (range [1..20])

-# that doxygen will group on one line in the generated HTML documentation.

-

-ENUM_VALUES_PER_LINE   = 4

-

-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be

-# generated containing a tree-like index structure (just like the one that

-# is generated for HTML Help). For this to work a browser that supports

-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,

-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are

-# probably better off using the HTML help feature.

-

-GENERATE_TREEVIEW      = NO

-

-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

-# used to set the initial width (in pixels) of the frame in which the tree

-# is shown.

-

-TREEVIEW_WIDTH         = 250

-

-#---------------------------------------------------------------------------

-# configuration options related to the LaTeX output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

-# generate Latex output.

-

-GENERATE_LATEX         = NO

-

-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `latex' will be used as the default path.

-

-LATEX_OUTPUT           = latex

-

-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

-# invoked. If left blank `latex' will be used as the default command name.

-

-LATEX_CMD_NAME         = latex

-

-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

-# generate index for LaTeX. If left blank `makeindex' will be used as the

-# default command name.

-

-MAKEINDEX_CMD_NAME     = makeindex

-

-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

-# LaTeX documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_LATEX          = NO

-

-# The PAPER_TYPE tag can be used to set the paper type that is used

-# by the printer. Possible values are: a4, a4wide, letter, legal and

-# executive. If left blank a4wide will be used.

-

-PAPER_TYPE             = a4wide

-

-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

-# packages that should be included in the LaTeX output.

-

-EXTRA_PACKAGES         =

-

-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

-# the generated latex document. The header should contain everything until

-# the first chapter. If it is left blank doxygen will generate a

-# standard header. Notice: only use this tag if you know what you are doing!

-

-LATEX_HEADER           =

-

-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

-# is prepared for conversion to pdf (using ps2pdf). The pdf file will

-# contain links (just like the HTML output) instead of page references

-# This makes the output suitable for online browsing using a pdf viewer.

-

-PDF_HYPERLINKS         = NO

-

-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

-# plain latex in the generated Makefile. Set this option to YES to get a

-# higher quality PDF documentation.

-

-USE_PDFLATEX           = NO

-

-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

-# command to the generated LaTeX files. This will instruct LaTeX to keep

-# running if errors occur, instead of asking the user for help.

-# This option is also used when generating formulas in HTML.

-

-LATEX_BATCHMODE        = NO

-

-# If LATEX_HIDE_INDICES is set to YES then doxygen will not

-# include the index chapters (such as File Index, Compound Index, etc.)

-# in the output.

-

-LATEX_HIDE_INDICES     = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the RTF output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

-# The RTF output is optimized for Word 97 and may not look very pretty with

-# other RTF readers or editors.

-

-GENERATE_RTF           = NO

-

-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `rtf' will be used as the default path.

-

-RTF_OUTPUT             = rtf

-

-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

-# RTF documents. This may be useful for small projects and may help to

-# save some trees in general.

-

-COMPACT_RTF            = NO

-

-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

-# will contain hyperlink fields. The RTF file will

-# contain links (just like the HTML output) instead of page references.

-# This makes the output suitable for online browsing using WORD or other

-# programs which support those fields.

-# Note: wordpad (write) and others do not support links.

-

-RTF_HYPERLINKS         = NO

-

-# Load stylesheet definitions from file. Syntax is similar to doxygen's

-# config file, i.e. a series of assignments. You only have to provide

-# replacements, missing definitions are set to their default value.

-

-RTF_STYLESHEET_FILE    =

-

-# Set optional variables used in the generation of an rtf document.

-# Syntax is similar to doxygen's config file.

-

-RTF_EXTENSIONS_FILE    =

-

-#---------------------------------------------------------------------------

-# configuration options related to the man page output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

-# generate man pages

-

-GENERATE_MAN           = NO

-

-# The MAN_OUTPUT tag is used to specify where the man pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `man' will be used as the default path.

-

-MAN_OUTPUT             = man

-

-# The MAN_EXTENSION tag determines the extension that is added to

-# the generated man pages (default is the subroutine's section .3)

-

-MAN_EXTENSION          = .3

-

-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

-# then it will generate one additional man file for each entity

-# documented in the real man page(s). These additional files

-# only source the real man page, but without them the man command

-# would be unable to find the correct page. The default is NO.

-

-MAN_LINKS              = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the XML output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_XML tag is set to YES Doxygen will

-# generate an XML file that captures the structure of

-# the code including all documentation.

-

-GENERATE_XML           = NO

-

-# The XML_OUTPUT tag is used to specify where the XML pages will be put.

-# If a relative path is entered the value of OUTPUT_DIRECTORY will be

-# put in front of it. If left blank `xml' will be used as the default path.

-

-XML_OUTPUT             = xml

-

-# The XML_SCHEMA tag can be used to specify an XML schema,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_SCHEMA             =

-

-# The XML_DTD tag can be used to specify an XML DTD,

-# which can be used by a validating XML parser to check the

-# syntax of the XML files.

-

-XML_DTD                =

-

-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

-# dump the program listings (including syntax highlighting

-# and cross-referencing information) to the XML output. Note that

-# enabling this will significantly increase the size of the XML output.

-

-XML_PROGRAMLISTING     = YES

-

-#---------------------------------------------------------------------------

-# configuration options for the AutoGen Definitions output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

-# generate an AutoGen Definitions (see autogen.sf.net) file

-# that captures the structure of the code including all

-# documentation. Note that this feature is still experimental

-# and incomplete at the moment.

-

-GENERATE_AUTOGEN_DEF   = NO

-

-#---------------------------------------------------------------------------

-# configuration options related to the Perl module output

-#---------------------------------------------------------------------------

-

-# If the GENERATE_PERLMOD tag is set to YES Doxygen will

-# generate a Perl module file that captures the structure of

-# the code including all documentation. Note that this

-# feature is still experimental and incomplete at the

-# moment.

-

-GENERATE_PERLMOD       = NO

-

-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

-# the necessary Makefile rules, Perl scripts and LaTeX code to be able

-# to generate PDF and DVI output from the Perl module output.

-

-PERLMOD_LATEX          = NO

-

-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

-# nicely formatted so it can be parsed by a human reader.  This is useful

-# if you want to understand what is going on.  On the other hand, if this

-# tag is set to NO the size of the Perl module output will be much smaller

-# and Perl will parse it just the same.

-

-PERLMOD_PRETTY         = YES

-

-# The names of the make variables in the generated doxyrules.make file

-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

-# This is useful so different doxyrules.make files included by the same

-# Makefile don't overwrite each other's variables.

-

-PERLMOD_MAKEVAR_PREFIX =

-

-#---------------------------------------------------------------------------

-# Configuration options related to the preprocessor

-#---------------------------------------------------------------------------

-

-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

-# evaluate all C-preprocessor directives found in the sources and include

-# files.

-

-ENABLE_PREPROCESSING   = YES

-

-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

-# names in the source code. If set to NO (the default) only conditional

-# compilation will be performed. Macro expansion can be done in a controlled

-# way by setting EXPAND_ONLY_PREDEF to YES.

-

-MACRO_EXPANSION        = NO

-

-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

-# then the macro expansion is limited to the macros specified with the

-# PREDEFINED and EXPAND_AS_DEFINED tags.

-

-EXPAND_ONLY_PREDEF     = NO

-

-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

-# in the INCLUDE_PATH (see below) will be search if a #include is found.

-

-SEARCH_INCLUDES        = YES

-

-# The INCLUDE_PATH tag can be used to specify one or more directories that

-# contain include files that are not input files but should be processed by

-# the preprocessor.

-

-INCLUDE_PATH           =

-

-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

-# patterns (like *.h and *.hpp) to filter out the header-files in the

-# directories. If left blank, the patterns specified with FILE_PATTERNS will

-# be used.

-

-INCLUDE_FILE_PATTERNS  =

-

-# The PREDEFINED tag can be used to specify one or more macro names that

-# are defined before the preprocessor is started (similar to the -D option of

-# gcc). The argument of the tag is a list of macros of the form: name

-# or name=definition (no spaces). If the definition and the = are

-# omitted =1 is assumed. To prevent a macro definition from being

-# undefined via #undef or recursively expanded use the := operator

-# instead of the = operator.

-

-PREDEFINED             =

-

-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

-# this tag can be used to specify a list of macro names that should be expanded.

-# The macro definition that is found in the sources will be used.

-# Use the PREDEFINED tag if you want to use a different macro definition.

-

-EXPAND_AS_DEFINED      =

-

-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

-# doxygen's preprocessor will remove all function-like macros that are alone

-# on a line, have an all uppercase name, and do not end with a semicolon. Such

-# function macros are typically used for boiler-plate code, and will confuse

-# the parser if not removed.

-

-SKIP_FUNCTION_MACROS   = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to external references

-#---------------------------------------------------------------------------

-

-# The TAGFILES option can be used to specify one or more tagfiles.

-# Optionally an initial location of the external documentation

-# can be added for each tagfile. The format of a tag file without

-# this location is as follows:

-#   TAGFILES = file1 file2 ...

-# Adding location for the tag files is done as follows:

-#   TAGFILES = file1=loc1 "file2 = loc2" ...

-# where "loc1" and "loc2" can be relative or absolute paths or

-# URLs. If a location is present for each tag, the installdox tool

-# does not have to be run to correct the links.

-# Note that each tag file must have a unique name

-# (where the name does NOT include the path)

-# If a tag file is not located in the directory in which doxygen

-# is run, you must also specify the path to the tagfile here.

-

-TAGFILES               =

-

-# When a file name is specified after GENERATE_TAGFILE, doxygen will create

-# a tag file that is based on the input files it reads.

-

-GENERATE_TAGFILE       =

-

-# If the ALLEXTERNALS tag is set to YES all external classes will be listed

-# in the class index. If set to NO only the inherited external classes

-# will be listed.

-

-ALLEXTERNALS           = NO

-

-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

-# in the modules index. If set to NO, only the current project's groups will

-# be listed.

-

-EXTERNAL_GROUPS        = YES

-

-# The PERL_PATH should be the absolute path and name of the perl script

-# interpreter (i.e. the result of `which perl').

-

-PERL_PATH              = /usr/bin/perl

-

-#---------------------------------------------------------------------------

-# Configuration options related to the dot tool

-#---------------------------------------------------------------------------

-

-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

-# or super classes. Setting the tag to NO turns the diagrams off. Note that

-# this option is superseded by the HAVE_DOT option below. This is only a

-# fallback. It is recommended to install and use dot, since it yields more

-# powerful graphs.

-

-CLASS_DIAGRAMS         = YES

-

-# If set to YES, the inheritance and collaboration graphs will hide

-# inheritance and usage relations if the target is undocumented

-# or is not a class.

-

-HIDE_UNDOC_RELATIONS   = YES

-

-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

-# available from the path. This tool is part of Graphviz, a graph visualization

-# toolkit from AT&T and Lucent Bell Labs. The other options in this section

-# have no effect if this option is set to NO (the default)

-

-HAVE_DOT               = YES

-

-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect inheritance relations. Setting this tag to YES will force the

-# the CLASS_DIAGRAMS tag to NO.

-

-CLASS_GRAPH            = YES

-

-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for each documented class showing the direct and

-# indirect implementation dependencies (inheritance, containment, and

-# class references variables) of the class with other documented classes.

-

-COLLABORATION_GRAPH    = YES

-

-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

-# will generate a graph for groups, showing the direct groups dependencies

-

-GROUP_GRAPHS           = YES

-

-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

-# collaboration diagrams in a style similar to the OMG's Unified Modeling

-# Language.

-

-UML_LOOK               = NO

-

-# If set to YES, the inheritance and collaboration graphs will show the

-# relations between templates and their instances.

-

-TEMPLATE_RELATIONS     = NO

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

-# tags are set to YES then doxygen will generate a graph for each documented

-# file showing the direct and indirect include dependencies of the file with

-# other documented files.

-

-INCLUDE_GRAPH          = YES

-

-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

-# documented header file showing the documented files that directly or

-# indirectly include this file.

-

-INCLUDED_BY_GRAPH      = YES

-

-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will

-# generate a call dependency graph for every global function or class method.

-# Note that enabling this option will significantly increase the time of a run.

-# So in most cases it will be better to enable call graphs for selected

-# functions only using the \callgraph command.

-

-CALL_GRAPH             = NO

-

-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will

-# generate a caller dependency graph for every global function or class method.

-# Note that enabling this option will significantly increase the time of a run.

-# So in most cases it will be better to enable caller graphs for selected

-# functions only using the \callergraph command.

-

-CALLER_GRAPH           = NO

-

-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

-# will graphical hierarchy of all classes instead of a textual one.

-

-GRAPHICAL_HIERARCHY    = YES

-

-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

-# then doxygen will show the dependencies a directory has on other directories

-# in a graphical way. The dependency relations are determined by the #include

-# relations between the files in the directories.

-

-DIRECTORY_GRAPH        = YES

-

-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

-# generated by dot. Possible values are png, jpg, or gif

-# If left blank png will be used.

-

-DOT_IMAGE_FORMAT       = png

-

-# The tag DOT_PATH can be used to specify the path where the dot tool can be

-# found. If left blank, it is assumed the dot tool can be found in the path.

-

-DOT_PATH               =

-

-# The DOTFILE_DIRS tag can be used to specify one or more directories that

-# contain dot files that are included in the documentation (see the

-# \dotfile command).

-

-DOTFILE_DIRS           =

-

-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width

-# (in pixels) of the graphs generated by dot. If a graph becomes larger than

-# this value, doxygen will try to truncate the graph, so that it fits within

-# the specified constraint. Beware that most browsers cannot cope with very

-# large images.

-

-MAX_DOT_GRAPH_WIDTH    = 1024

-

-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height

-# (in pixels) of the graphs generated by dot. If a graph becomes larger than

-# this value, doxygen will try to truncate the graph, so that it fits within

-# the specified constraint. Beware that most browsers cannot cope with very

-# large images.

-

-MAX_DOT_GRAPH_HEIGHT   = 1024

-

-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

-# graphs generated by dot. A depth value of 3 means that only nodes reachable

-# from the root by following a path via at most 3 edges will be shown. Nodes

-# that lay further from the root node will be omitted. Note that setting this

-# option to 1 or 2 may greatly reduce the computation time needed for large

-# code bases. Also note that a graph may be further truncated if the graph's

-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH

-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),

-# the graph is not depth-constrained.

-

-MAX_DOT_GRAPH_DEPTH    = 0

-

-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

-# background. This is disabled by default, which results in a white background.

-# Warning: Depending on the platform used, enabling this option may lead to

-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to

-# read).

-

-DOT_TRANSPARENT        = NO

-

-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

-# files in one run (i.e. multiple -o and -T options on the command line). This

-# makes dot run faster, but since only newer versions of dot (>1.8.10)

-# support this, this feature is disabled by default.

-

-DOT_MULTI_TARGETS      = NO

-

-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

-# generate a legend page explaining the meaning of the various boxes and

-# arrows in the dot generated graphs.

-

-GENERATE_LEGEND        = YES

-

-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

-# remove the intermediate dot files that are used to generate

-# the various graphs.

-

-DOT_CLEANUP            = YES

-

-#---------------------------------------------------------------------------

-# Configuration::additions related to the search engine

-#---------------------------------------------------------------------------

-

-# The SEARCHENGINE tag specifies whether or not a search engine should be

-# used. If set to NO the values of all tags below this one will be ignored.

-

-SEARCHENGINE           = NO

+# Doxyfile 1.5.0
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+#       TAG = value [value, ...]
+# For lists items can also be appended using:
+#       TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME           = "XCB"
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER         = @VERSION@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = @top_builddir@/doc
+
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of
+# source files, where putting all generated files in the same directory would
+# otherwise cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
+# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
+# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
+# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
+# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE        = English
+
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING   = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is
+# used as the annotated text. Otherwise, the brief description is used as-is.
+# If left blank, the following values are used ("$name" is automatically
+# replaced with the name of the entity): "The $name class" "The $name widget"
+# "The $name file" "is" "provides" "specifies" "contains"
+# "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF      = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP         = NO
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
+# a new page for each member. If set to NO, the documentation of a member will
+# be part of the file/class/namespace that contains it.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
+# sources only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
+# sources only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
+# include (a tag file for) the STL sources as input, then you should
+# set this tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
+# func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# and Mac users are advised to set this option to NO.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES        = YES
+
+# If the sources in your project are distributed over multiple directories
+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
+# in the documentation. The default is NO.
+
+SHOW_DIRECTORIES       = NO
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from the
+# version control system). Doxygen will invoke the program by executing (via
+# popen()) the command <command> <input-file>, where <command> is the value of
+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
+# provided by doxygen. Whatever the program writes to standard output
+# is used as the file version. See the manual for examples.
+
+FILE_VERSION_FILTER    =
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS               = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+# XXX: In the future this should be turned on. For now it generates too much noise.
+WARN_IF_UNDOCUMENTED   = NO
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be abled to get warnings for
+# functions that are documented, but have no documentation for their parameters
+# or return value. If set to NO (the default) doxygen will only warn about
+# wrong or incomplete parameter documentation, but not about the absence of
+# documentation.
+
+WARN_NO_PARAMDOC       = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text. Optionally the format may contain
+# $version, which will be replaced by the version of the file (if it could
+# be obtained via FILE_VERSION_FILTER)
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT                  = @top_srcdir@/src @top_builddir@/src
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
+
+FILE_PATTERNS          =
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE              = NO
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
+# directories that are symbolic links (a Unix filesystem feature) are excluded
+# from the input.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories. Note that the wildcards are matched
+# against the file with absolute path, so to exclude all test directories
+# for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be
+# ignored.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.  Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.  The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
+# is applied to all files.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES    = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION    = YES
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
+# link to the source code.  Otherwise they will link to the documentstion.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code
+# will point to the HTML generated by the htags(1) tool instead of doxygen
+# built-in source browser. The htags tool is part of GNU's global source
+# tagging system (see http://www.gnu.org/software/global/global.html). You
+# will need version 4.8.6 or higher.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS       = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX     = NO
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT            = manual
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET        =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS     = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP      = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE               =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION           =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI           = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND             = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX          = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW      = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH         = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER           =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS         = NO
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX           = NO
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE        = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES     = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE    =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION          = .3
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT             = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA             =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD                =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.  This is useful
+# if you want to understand what is going on.  On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_DEFINED tags.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed. To prevent a macro definition from being
+# undefined via #undef or recursively expanded use the := operator
+# instead of the = operator.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse
+# the parser if not removed.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#   TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#   TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS        = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH              = /usr/bin/perl
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
+# or super classes. Setting the tag to NO turns the diagrams off. Note that
+# this option is superseded by the HAVE_DOT option below. This is only a
+# fallback. It is recommended to install and use dot, since it yields more
+# powerful graphs.
+
+CLASS_DIAGRAMS         = YES
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT               = YES
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for groups, showing the direct groups dependencies
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK               = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH          = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
+CALL_GRAPH             = NO
+
+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a caller dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command.
+
+CALLER_GRAPH           = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# then doxygen will show the dependencies a directory has on other directories
+# in a graphical way. The dependency relations are determined by the #include
+# relations between the files in the directories.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT       = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS           =
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_WIDTH    = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT   = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes
+# that lay further from the root node will be omitted. Note that setting this
+# option to 1 or 2 may greatly reduce the computation time needed for large
+# code bases. Also note that a graph may be further truncated if the graph's
+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
+# the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, which results in a white background.
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+
+DOT_TRANSPARENT        = NO
+
+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10)
+# support this, this feature is disabled by default.
+
+DOT_MULTI_TARGETS      = NO
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP            = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE           = NO