Used synchronise script to update files

1 files changed, 1253 insertions, 1253 deletions

diff --git a/libxcb/doc/xcb.doxygen.in b/libxcb/doc/xcb.doxygen.in
index 58aa07630..d674cbab1 100644
--- a/libxcb/doc/xcb.doxygen.in
+++ b/libxcb/doc/xcb.doxygen.in
@@ -1,1253 +1,1253 @@
-# Doxyfile 1.5.0
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = "XCB"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER         = @VERSION@
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = @top_builddir@/doc
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
-# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
-# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
-# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE        = English
-
-# This tag can be used to specify the encoding used in the generated output.
-# The encoding is not always determined by the language that is chosen,
-# but also whether or not the output is meant for Windows or non-Windows users.
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
-# forces the Windows encoding (this is the default for the Windows binary),
-# whereas setting the tag to NO uses a Unix-style encoding (the default for
-# all platforms other than Windows).
-
-USE_WINDOWS_ENCODING   = NO
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF       =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful is your file systems
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like the Qt-style comments (thus requiring an
-# explicit @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member
-# documentation.
-
-DETAILS_AT_TOP         = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for Java.
-# For instance, namespaces will be presented as packages, qualified scopes
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
-# include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC         = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or define consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and defines in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = YES
-
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = NO
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from the
-# version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER    =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-# XXX: In the future this should be turned on. For now it generates too much noise.
-WARN_IF_UNDOCUMENTED   = NO
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be abled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC       = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT                  = @top_srcdir@/src @top_builddir@/src
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
-# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
-
-FILE_PATTERNS          =
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE              = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                =
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
-# directories that are symbolic links (a Unix filesystem feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS       =
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.  If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.  Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.  The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
-# is applied to all files.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default)
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default)
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.  Otherwise they will link to the documentstion.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = NO
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = manual
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# stylesheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET        =
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE               =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
-# top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it.
-
-DISABLE_INDEX          = NO
-
-# This tag can be used to set the number of enum values (range [1..20])
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = NO
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, a4wide, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = NO
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = NO
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES     = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD                =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.  This is useful
-# if you want to understand what is going on.  On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED             =
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all function-like macros that are alone
-# on a line, have an all uppercase name, and do not end with a semicolon. Such
-# function macros are typically used for boiler-plate code, and will confuse
-# the parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles.
-# Optionally an initial location of the external documentation
-# can be added for each tagfile. The format of a tag file without
-# this location is as follows:
-#   TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#   TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths or
-# URLs. If a location is present for each tag, the installdox tool
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option is superseded by the HAVE_DOT option below. This is only a
-# fallback. It is recommended to install and use dot, since it yields more
-# powerful graphs.
-
-CLASS_DIAGRAMS         = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = YES
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = YES
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH          = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a call dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
-# generate a caller dependency graph for every global function or class method.
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = png
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS           =
-
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_WIDTH    = 1024
-
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than
-# this value, doxygen will try to truncate the graph, so that it fits within
-# the specified constraint. Beware that most browsers cannot cope with very
-# large images.
-
-MAX_DOT_GRAPH_HEIGHT   = 1024
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that a graph may be further truncated if the graph's
-# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
-# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
-# the graph is not depth-constrained.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, which results in a white background.
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-
-DOT_TRANSPARENT        = NO
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS      = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP            = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to the search engine
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE           = NO
+# Doxyfile 1.5.0

+

+# This file describes the settings to be used by the documentation system

+# doxygen (www.doxygen.org) for a project

+#

+# All text after a hash (#) is considered a comment and will be ignored

+# The format is:

+#       TAG = value [value, ...]

+# For lists items can also be appended using:

+#       TAG += value [value, ...]

+# Values that contain spaces should be placed between quotes (" ")

+

+#---------------------------------------------------------------------------

+# Project related configuration options

+#---------------------------------------------------------------------------

+

+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded

+# by quotes) that should identify the project.

+

+PROJECT_NAME           = "XCB"

+

+# The PROJECT_NUMBER tag can be used to enter a project or revision number.

+# This could be handy for archiving the generated documentation or

+# if some version control system is used.

+

+PROJECT_NUMBER         = @VERSION@

+

+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)

+# base path where the generated documentation will be put.

+# If a relative path is entered, it will be relative to the location

+# where doxygen was started. If left blank the current directory will be used.

+

+OUTPUT_DIRECTORY       = @top_builddir@/doc

+

+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create

+# 4096 sub-directories (in 2 levels) under the output directory of each output

+# format and will distribute the generated files over these directories.

+# Enabling this option can be useful when feeding doxygen a huge amount of

+# source files, where putting all generated files in the same directory would

+# otherwise cause performance problems for the file system.

+

+CREATE_SUBDIRS         = NO

+

+# The OUTPUT_LANGUAGE tag is used to specify the language in which all

+# documentation generated by doxygen is written. Doxygen will use this

+# information to generate all constant output in the proper language.

+# The default language is English, other supported languages are:

+# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,

+# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,

+# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,

+# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,

+# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.

+

+OUTPUT_LANGUAGE        = English

+

+# This tag can be used to specify the encoding used in the generated output.

+# The encoding is not always determined by the language that is chosen,

+# but also whether or not the output is meant for Windows or non-Windows users.

+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES

+# forces the Windows encoding (this is the default for the Windows binary),

+# whereas setting the tag to NO uses a Unix-style encoding (the default for

+# all platforms other than Windows).

+

+USE_WINDOWS_ENCODING   = NO

+

+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will

+# include brief member descriptions after the members that are listed in

+# the file and class documentation (similar to JavaDoc).

+# Set to NO to disable this.

+

+BRIEF_MEMBER_DESC      = YES

+

+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend

+# the brief description of a member or function before the detailed description.

+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the

+# brief descriptions will be completely suppressed.

+

+REPEAT_BRIEF           = YES

+

+# This tag implements a quasi-intelligent brief description abbreviator

+# that is used to form the text in various listings. Each string

+# in this list, if found as the leading text of the brief description, will be

+# stripped from the text and the result after processing the whole list, is

+# used as the annotated text. Otherwise, the brief description is used as-is.

+# If left blank, the following values are used ("$name" is automatically

+# replaced with the name of the entity): "The $name class" "The $name widget"

+# "The $name file" "is" "provides" "specifies" "contains"

+# "represents" "a" "an" "the"

+

+ABBREVIATE_BRIEF       =

+

+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then

+# Doxygen will generate a detailed section even if there is only a brief

+# description.

+

+ALWAYS_DETAILED_SEC    = NO

+

+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all

+# inherited members of a class in the documentation of that class as if those

+# members were ordinary class members. Constructors, destructors and assignment

+# operators of the base classes will not be shown.

+

+INLINE_INHERITED_MEMB  = NO

+

+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full

+# path before files name in the file list and in the header files. If set

+# to NO the shortest path that makes the file name unique will be used.

+

+FULL_PATH_NAMES        = NO

+

+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag

+# can be used to strip a user-defined part of the path. Stripping is

+# only done if one of the specified strings matches the left-hand part of

+# the path. The tag can be used to show relative paths in the file list.

+# If left blank the directory from which doxygen is run is used as the

+# path to strip.

+

+STRIP_FROM_PATH        =

+

+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of

+# the path mentioned in the documentation of a class, which tells

+# the reader which header file to include in order to use a class.

+# If left blank only the name of the header file containing the class

+# definition is used. Otherwise one should specify the include paths that

+# are normally passed to the compiler using the -I flag.

+

+STRIP_FROM_INC_PATH    =

+

+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter

+# (but less readable) file names. This can be useful is your file systems

+# doesn't support long names like on DOS, Mac, or CD-ROM.

+

+SHORT_NAMES            = NO

+

+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen

+# will interpret the first line (until the first dot) of a JavaDoc-style

+# comment as the brief description. If set to NO, the JavaDoc

+# comments will behave just like the Qt-style comments (thus requiring an

+# explicit @brief command for a brief description.

+

+JAVADOC_AUTOBRIEF      = NO

+

+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen

+# treat a multi-line C++ special comment block (i.e. a block of //! or ///

+# comments) as a brief description. This used to be the default behaviour.

+# The new default is to treat a multi-line C++ comment block as a detailed

+# description. Set this tag to YES if you prefer the old behaviour instead.

+

+MULTILINE_CPP_IS_BRIEF = NO

+

+# If the DETAILS_AT_TOP tag is set to YES then Doxygen

+# will output the detailed description near the top, like JavaDoc.

+# If set to NO, the detailed description appears after the member

+# documentation.

+

+DETAILS_AT_TOP         = NO

+

+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented

+# member inherits the documentation from any documented member that it

+# re-implements.

+

+INHERIT_DOCS           = YES

+

+# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce

+# a new page for each member. If set to NO, the documentation of a member will

+# be part of the file/class/namespace that contains it.

+

+SEPARATE_MEMBER_PAGES  = NO

+

+# The TAB_SIZE tag can be used to set the number of spaces in a tab.

+# Doxygen uses this value to replace tabs by spaces in code fragments.

+

+TAB_SIZE               = 8

+

+# This tag can be used to specify a number of aliases that acts

+# as commands in the documentation. An alias has the form "name=value".

+# For example adding "sideeffect=\par Side Effects:\n" will allow you to

+# put the command \sideeffect (or @sideeffect) in the documentation, which

+# will result in a user-defined paragraph with heading "Side Effects:".

+# You can put \n's in the value part of an alias to insert newlines.

+

+ALIASES                =

+

+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C

+# sources only. Doxygen will then generate output that is more tailored for C.

+# For instance, some of the names that are used will be different. The list

+# of all members will be omitted, etc.

+

+OPTIMIZE_OUTPUT_FOR_C  = YES

+

+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java

+# sources only. Doxygen will then generate output that is more tailored for Java.

+# For instance, namespaces will be presented as packages, qualified scopes

+# will look different, etc.

+

+OPTIMIZE_OUTPUT_JAVA   = NO

+

+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to

+# include (a tag file for) the STL sources as input, then you should

+# set this tag to YES in order to let doxygen match functions declarations and

+# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.

+# func(std::string) {}). This also make the inheritance and collaboration

+# diagrams that involve STL classes more complete and accurate.

+

+BUILTIN_STL_SUPPORT    = NO

+

+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC

+# tag is set to YES, then doxygen will reuse the documentation of the first

+# member in the group (if any) for the other members of the group. By default

+# all members of a group must be documented explicitly.

+

+DISTRIBUTE_GROUP_DOC   = NO

+

+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of

+# the same type (for instance a group of public functions) to be put as a

+# subgroup of that type (e.g. under the Public Functions section). Set it to

+# NO to prevent subgrouping. Alternatively, this can be done per class using

+# the \nosubgrouping command.

+

+SUBGROUPING            = YES

+

+#---------------------------------------------------------------------------

+# Build related configuration options

+#---------------------------------------------------------------------------

+

+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in

+# documentation are documented, even if no documentation was available.

+# Private class members and static file members will be hidden unless

+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES

+

+EXTRACT_ALL            = NO

+

+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class

+# will be included in the documentation.

+

+EXTRACT_PRIVATE        = NO

+

+# If the EXTRACT_STATIC tag is set to YES all static members of a file

+# will be included in the documentation.

+

+EXTRACT_STATIC         = NO

+

+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)

+# defined locally in source files will be included in the documentation.

+# If set to NO only classes defined in header files are included.

+

+EXTRACT_LOCAL_CLASSES  = YES

+

+# This flag is only useful for Objective-C code. When set to YES local

+# methods, which are defined in the implementation section but not in

+# the interface are included in the documentation.

+# If set to NO (the default) only methods in the interface are included.

+

+EXTRACT_LOCAL_METHODS  = NO

+

+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all

+# undocumented members of documented classes, files or namespaces.

+# If set to NO (the default) these members will be included in the

+# various overviews, but no documentation section is generated.

+# This option has no effect if EXTRACT_ALL is enabled.

+

+HIDE_UNDOC_MEMBERS     = NO

+

+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all

+# undocumented classes that are normally visible in the class hierarchy.

+# If set to NO (the default) these classes will be included in the various

+# overviews. This option has no effect if EXTRACT_ALL is enabled.

+

+HIDE_UNDOC_CLASSES     = NO

+

+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all

+# friend (class|struct|union) declarations.

+# If set to NO (the default) these declarations will be included in the

+# documentation.

+

+HIDE_FRIEND_COMPOUNDS  = NO

+

+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any

+# documentation blocks found inside the body of a function.

+# If set to NO (the default) these blocks will be appended to the

+# function's detailed documentation block.

+

+HIDE_IN_BODY_DOCS      = NO

+

+# The INTERNAL_DOCS tag determines if documentation

+# that is typed after a \internal command is included. If the tag is set

+# to NO (the default) then the documentation will be excluded.

+# Set it to YES to include the internal documentation.

+

+INTERNAL_DOCS          = NO

+

+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate

+# file names in lower-case letters. If set to YES upper-case letters are also

+# allowed. This is useful if you have classes or files whose names only differ

+# in case and if your file system supports case sensitive file names. Windows

+# and Mac users are advised to set this option to NO.

+

+CASE_SENSE_NAMES       = YES

+

+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen

+# will show members with their full class and namespace scopes in the

+# documentation. If set to YES the scope will be hidden.

+

+HIDE_SCOPE_NAMES       = NO

+

+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen

+# will put a list of the files that are included by a file in the documentation

+# of that file.

+

+SHOW_INCLUDE_FILES     = YES

+

+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]

+# is inserted in the documentation for inline members.

+

+INLINE_INFO            = YES

+

+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen

+# will sort the (detailed) documentation of file and class members

+# alphabetically by member name. If set to NO the members will appear in

+# declaration order.

+

+SORT_MEMBER_DOCS       = YES

+

+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the

+# brief documentation of file, namespace and class members alphabetically

+# by member name. If set to NO (the default) the members will appear in

+# declaration order.

+

+SORT_BRIEF_DOCS        = NO

+

+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be

+# sorted by fully-qualified names, including namespaces. If set to

+# NO (the default), the class list will be sorted only by class name,

+# not including the namespace part.

+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.

+# Note: This option applies only to the class list, not to the

+# alphabetical list.

+

+SORT_BY_SCOPE_NAME     = NO

+

+# The GENERATE_TODOLIST tag can be used to enable (YES) or

+# disable (NO) the todo list. This list is created by putting \todo

+# commands in the documentation.

+

+GENERATE_TODOLIST      = YES

+

+# The GENERATE_TESTLIST tag can be used to enable (YES) or

+# disable (NO) the test list. This list is created by putting \test

+# commands in the documentation.

+

+GENERATE_TESTLIST      = YES

+

+# The GENERATE_BUGLIST tag can be used to enable (YES) or

+# disable (NO) the bug list. This list is created by putting \bug

+# commands in the documentation.

+

+GENERATE_BUGLIST       = YES

+

+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or

+# disable (NO) the deprecated list. This list is created by putting

+# \deprecated commands in the documentation.

+

+GENERATE_DEPRECATEDLIST= YES

+

+# The ENABLED_SECTIONS tag can be used to enable conditional

+# documentation sections, marked by \if sectionname ... \endif.

+

+ENABLED_SECTIONS       =

+

+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines

+# the initial value of a variable or define consists of for it to appear in

+# the documentation. If the initializer consists of more lines than specified

+# here it will be hidden. Use a value of 0 to hide initializers completely.

+# The appearance of the initializer of individual variables and defines in the

+# documentation can be controlled using \showinitializer or \hideinitializer

+# command in the documentation regardless of this setting.

+

+MAX_INITIALIZER_LINES  = 30

+

+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated

+# at the bottom of the documentation of classes and structs. If set to YES the

+# list will mention the files that were used to generate the documentation.

+

+SHOW_USED_FILES        = YES

+

+# If the sources in your project are distributed over multiple directories

+# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy

+# in the documentation. The default is NO.

+

+SHOW_DIRECTORIES       = NO

+

+# The FILE_VERSION_FILTER tag can be used to specify a program or script that

+# doxygen should invoke to get the current version for each file (typically from the

+# version control system). Doxygen will invoke the program by executing (via

+# popen()) the command <command> <input-file>, where <command> is the value of

+# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file

+# provided by doxygen. Whatever the program writes to standard output

+# is used as the file version. See the manual for examples.

+

+FILE_VERSION_FILTER    =

+

+#---------------------------------------------------------------------------

+# configuration options related to warning and progress messages

+#---------------------------------------------------------------------------

+

+# The QUIET tag can be used to turn on/off the messages that are generated

+# by doxygen. Possible values are YES and NO. If left blank NO is used.

+

+QUIET                  = YES

+

+# The WARNINGS tag can be used to turn on/off the warning messages that are

+# generated by doxygen. Possible values are YES and NO. If left blank

+# NO is used.

+

+WARNINGS               = YES

+

+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings

+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will

+# automatically be disabled.

+

+# XXX: In the future this should be turned on. For now it generates too much noise.

+WARN_IF_UNDOCUMENTED   = NO

+

+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for

+# potential errors in the documentation, such as not documenting some

+# parameters in a documented function, or documenting parameters that

+# don't exist or using markup commands wrongly.

+

+WARN_IF_DOC_ERROR      = YES

+

+# This WARN_NO_PARAMDOC option can be abled to get warnings for

+# functions that are documented, but have no documentation for their parameters

+# or return value. If set to NO (the default) doxygen will only warn about

+# wrong or incomplete parameter documentation, but not about the absence of

+# documentation.

+

+WARN_NO_PARAMDOC       = YES

+

+# The WARN_FORMAT tag determines the format of the warning messages that

+# doxygen can produce. The string should contain the $file, $line, and $text

+# tags, which will be replaced by the file and line number from which the

+# warning originated and the warning text. Optionally the format may contain

+# $version, which will be replaced by the version of the file (if it could

+# be obtained via FILE_VERSION_FILTER)

+

+WARN_FORMAT            = "$file:$line: $text"

+

+# The WARN_LOGFILE tag can be used to specify a file to which warning

+# and error messages should be written. If left blank the output is written

+# to stderr.

+

+WARN_LOGFILE           =

+

+#---------------------------------------------------------------------------

+# configuration options related to the input files

+#---------------------------------------------------------------------------

+

+# The INPUT tag can be used to specify the files and/or directories that contain

+# documented source files. You may enter file names like "myfile.cpp" or

+# directories like "/usr/src/myproject". Separate the files or directories

+# with spaces.

+

+INPUT                  = @top_srcdir@/src @top_builddir@/src

+

+# If the value of the INPUT tag contains directories, you can use the

+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

+# and *.h) to filter out the source-files in the directories. If left

+# blank the following patterns are tested:

+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx

+# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py

+

+FILE_PATTERNS          =

+

+# The RECURSIVE tag can be used to turn specify whether or not subdirectories

+# should be searched for input files as well. Possible values are YES and NO.

+# If left blank NO is used.

+

+RECURSIVE              = NO

+

+# The EXCLUDE tag can be used to specify files and/or directories that should

+# excluded from the INPUT source files. This way you can easily exclude a

+# subdirectory from a directory tree whose root is specified with the INPUT tag.

+

+EXCLUDE                =

+

+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or

+# directories that are symbolic links (a Unix filesystem feature) are excluded

+# from the input.

+

+EXCLUDE_SYMLINKS       = NO

+

+# If the value of the INPUT tag contains directories, you can use the

+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude

+# certain files from those directories. Note that the wildcards are matched

+# against the file with absolute path, so to exclude all test directories

+# for example use the pattern */test/*

+

+EXCLUDE_PATTERNS       =

+

+# The EXAMPLE_PATH tag can be used to specify one or more files or

+# directories that contain example code fragments that are included (see

+# the \include command).

+

+EXAMPLE_PATH           =

+

+# If the value of the EXAMPLE_PATH tag contains directories, you can use the

+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp

+# and *.h) to filter out the source-files in the directories. If left

+# blank all files are included.

+

+EXAMPLE_PATTERNS       =

+

+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be

+# searched for input files to be used with the \include or \dontinclude

+# commands irrespective of the value of the RECURSIVE tag.

+# Possible values are YES and NO. If left blank NO is used.

+

+EXAMPLE_RECURSIVE      = NO

+

+# The IMAGE_PATH tag can be used to specify one or more files or

+# directories that contain image that are included in the documentation (see

+# the \image command).

+

+IMAGE_PATH             =

+

+# The INPUT_FILTER tag can be used to specify a program that doxygen should

+# invoke to filter for each input file. Doxygen will invoke the filter program

+# by executing (via popen()) the command <filter> <input-file>, where <filter>

+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an

+# input file. Doxygen will then use the output that the filter program writes

+# to standard output.  If FILTER_PATTERNS is specified, this tag will be

+# ignored.

+

+INPUT_FILTER           =

+

+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern

+# basis.  Doxygen will compare the file name with each pattern and apply the

+# filter if there is a match.  The filters are a list of the form:

+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further

+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER

+# is applied to all files.

+

+FILTER_PATTERNS        =

+

+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using

+# INPUT_FILTER) will be used to filter the input files when producing source

+# files to browse (i.e. when SOURCE_BROWSER is set to YES).

+

+FILTER_SOURCE_FILES    = NO

+

+#---------------------------------------------------------------------------

+# configuration options related to source browsing

+#---------------------------------------------------------------------------

+

+# If the SOURCE_BROWSER tag is set to YES then a list of source files will

+# be generated. Documented entities will be cross-referenced with these sources.

+# Note: To get rid of all source code in the generated output, make sure also

+# VERBATIM_HEADERS is set to NO.

+

+SOURCE_BROWSER         = NO

+

+# Setting the INLINE_SOURCES tag to YES will include the body

+# of functions and classes directly in the documentation.

+

+INLINE_SOURCES         = NO

+

+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct

+# doxygen to hide any special comment blocks from generated source code

+# fragments. Normal C and C++ comments will always remain visible.

+

+STRIP_CODE_COMMENTS    = YES

+

+# If the REFERENCED_BY_RELATION tag is set to YES (the default)

+# then for each documented function all documented

+# functions referencing it will be listed.

+

+REFERENCED_BY_RELATION = YES

+

+# If the REFERENCES_RELATION tag is set to YES (the default)

+# then for each documented function all documented entities

+# called/used by that function will be listed.

+

+REFERENCES_RELATION    = YES

+

+# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)

+# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from

+# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will

+# link to the source code.  Otherwise they will link to the documentstion.

+

+REFERENCES_LINK_SOURCE = YES

+

+# If the USE_HTAGS tag is set to YES then the references to source code

+# will point to the HTML generated by the htags(1) tool instead of doxygen

+# built-in source browser. The htags tool is part of GNU's global source

+# tagging system (see http://www.gnu.org/software/global/global.html). You

+# will need version 4.8.6 or higher.

+

+USE_HTAGS              = NO

+

+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen

+# will generate a verbatim copy of the header file for each class for

+# which an include is specified. Set to NO to disable this.

+

+VERBATIM_HEADERS       = YES

+

+#---------------------------------------------------------------------------

+# configuration options related to the alphabetical class index

+#---------------------------------------------------------------------------

+

+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index

+# of all compounds will be generated. Enable this if the project

+# contains a lot of classes, structs, unions or interfaces.

+

+ALPHABETICAL_INDEX     = NO

+

+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then

+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns

+# in which this list will be split (can be a number in the range [1..20])

+

+COLS_IN_ALPHA_INDEX    = 5

+

+# In case all classes in a project start with a common prefix, all

+# classes will be put under the same header in the alphabetical index.

+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that

+# should be ignored while generating the index headers.

+

+IGNORE_PREFIX          =

+

+#---------------------------------------------------------------------------

+# configuration options related to the HTML output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will

+# generate HTML output.

+

+GENERATE_HTML          = YES

+

+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.

+# If a relative path is entered the value of OUTPUT_DIRECTORY will be

+# put in front of it. If left blank `html' will be used as the default path.

+

+HTML_OUTPUT            = manual

+

+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for

+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank

+# doxygen will generate files with .html extension.

+

+HTML_FILE_EXTENSION    = .html

+

+# The HTML_HEADER tag can be used to specify a personal HTML header for

+# each generated HTML page. If it is left blank doxygen will generate a

+# standard header.

+

+HTML_HEADER            =

+

+# The HTML_FOOTER tag can be used to specify a personal HTML footer for

+# each generated HTML page. If it is left blank doxygen will generate a

+# standard footer.

+

+HTML_FOOTER            =

+

+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading

+# style sheet that is used by each HTML page. It can be used to

+# fine-tune the look of the HTML output. If the tag is left blank doxygen

+# will generate a default style sheet. Note that doxygen will try to copy

+# the style sheet file to the HTML output directory, so don't put your own

+# stylesheet in the HTML output directory as well, or it will be erased!

+

+HTML_STYLESHEET        =

+

+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,

+# files or namespaces will be aligned in HTML using tables. If set to

+# NO a bullet list will be used.

+

+HTML_ALIGN_MEMBERS     = YES

+

+# If the GENERATE_HTMLHELP tag is set to YES, additional index files

+# will be generated that can be used as input for tools like the

+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)

+# of the generated HTML documentation.

+

+GENERATE_HTMLHELP      = NO

+

+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can

+# be used to specify the file name of the resulting .chm file. You

+# can add a path in front of the file if the result should not be

+# written to the html output directory.

+

+CHM_FILE               =

+

+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can

+# be used to specify the location (absolute path including file name) of

+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run

+# the HTML help compiler on the generated index.hhp.

+

+HHC_LOCATION           =

+

+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag

+# controls if a separate .chi index file is generated (YES) or that

+# it should be included in the master .chm file (NO).

+

+GENERATE_CHI           = NO

+

+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag

+# controls whether a binary table of contents is generated (YES) or a

+# normal table of contents (NO) in the .chm file.

+

+BINARY_TOC             = NO

+

+# The TOC_EXPAND flag can be set to YES to add extra items for group members

+# to the contents of the HTML help documentation and to the tree view.

+

+TOC_EXPAND             = NO

+

+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at

+# top of each HTML page. The value NO (the default) enables the index and

+# the value YES disables it.

+

+DISABLE_INDEX          = NO

+

+# This tag can be used to set the number of enum values (range [1..20])

+# that doxygen will group on one line in the generated HTML documentation.

+

+ENUM_VALUES_PER_LINE   = 4

+

+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be

+# generated containing a tree-like index structure (just like the one that

+# is generated for HTML Help). For this to work a browser that supports

+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,

+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are

+# probably better off using the HTML help feature.

+

+GENERATE_TREEVIEW      = NO

+

+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be

+# used to set the initial width (in pixels) of the frame in which the tree

+# is shown.

+

+TREEVIEW_WIDTH         = 250

+

+#---------------------------------------------------------------------------

+# configuration options related to the LaTeX output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will

+# generate Latex output.

+

+GENERATE_LATEX         = NO

+

+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.

+# If a relative path is entered the value of OUTPUT_DIRECTORY will be

+# put in front of it. If left blank `latex' will be used as the default path.

+

+LATEX_OUTPUT           = latex

+

+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be

+# invoked. If left blank `latex' will be used as the default command name.

+

+LATEX_CMD_NAME         = latex

+

+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to

+# generate index for LaTeX. If left blank `makeindex' will be used as the

+# default command name.

+

+MAKEINDEX_CMD_NAME     = makeindex

+

+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact

+# LaTeX documents. This may be useful for small projects and may help to

+# save some trees in general.

+

+COMPACT_LATEX          = NO

+

+# The PAPER_TYPE tag can be used to set the paper type that is used

+# by the printer. Possible values are: a4, a4wide, letter, legal and

+# executive. If left blank a4wide will be used.

+

+PAPER_TYPE             = a4wide

+

+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX

+# packages that should be included in the LaTeX output.

+

+EXTRA_PACKAGES         =

+

+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for

+# the generated latex document. The header should contain everything until

+# the first chapter. If it is left blank doxygen will generate a

+# standard header. Notice: only use this tag if you know what you are doing!

+

+LATEX_HEADER           =

+

+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated

+# is prepared for conversion to pdf (using ps2pdf). The pdf file will

+# contain links (just like the HTML output) instead of page references

+# This makes the output suitable for online browsing using a pdf viewer.

+

+PDF_HYPERLINKS         = NO

+

+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of

+# plain latex in the generated Makefile. Set this option to YES to get a

+# higher quality PDF documentation.

+

+USE_PDFLATEX           = NO

+

+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.

+# command to the generated LaTeX files. This will instruct LaTeX to keep

+# running if errors occur, instead of asking the user for help.

+# This option is also used when generating formulas in HTML.

+

+LATEX_BATCHMODE        = NO

+

+# If LATEX_HIDE_INDICES is set to YES then doxygen will not

+# include the index chapters (such as File Index, Compound Index, etc.)

+# in the output.

+

+LATEX_HIDE_INDICES     = NO

+

+#---------------------------------------------------------------------------

+# configuration options related to the RTF output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output

+# The RTF output is optimized for Word 97 and may not look very pretty with

+# other RTF readers or editors.

+

+GENERATE_RTF           = NO

+

+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.

+# If a relative path is entered the value of OUTPUT_DIRECTORY will be

+# put in front of it. If left blank `rtf' will be used as the default path.

+

+RTF_OUTPUT             = rtf

+

+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact

+# RTF documents. This may be useful for small projects and may help to

+# save some trees in general.

+

+COMPACT_RTF            = NO

+

+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated

+# will contain hyperlink fields. The RTF file will

+# contain links (just like the HTML output) instead of page references.

+# This makes the output suitable for online browsing using WORD or other

+# programs which support those fields.

+# Note: wordpad (write) and others do not support links.

+

+RTF_HYPERLINKS         = NO

+

+# Load stylesheet definitions from file. Syntax is similar to doxygen's

+# config file, i.e. a series of assignments. You only have to provide

+# replacements, missing definitions are set to their default value.

+

+RTF_STYLESHEET_FILE    =

+

+# Set optional variables used in the generation of an rtf document.

+# Syntax is similar to doxygen's config file.

+

+RTF_EXTENSIONS_FILE    =

+

+#---------------------------------------------------------------------------

+# configuration options related to the man page output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will

+# generate man pages

+

+GENERATE_MAN           = NO

+

+# The MAN_OUTPUT tag is used to specify where the man pages will be put.

+# If a relative path is entered the value of OUTPUT_DIRECTORY will be

+# put in front of it. If left blank `man' will be used as the default path.

+

+MAN_OUTPUT             = man

+

+# The MAN_EXTENSION tag determines the extension that is added to

+# the generated man pages (default is the subroutine's section .3)

+

+MAN_EXTENSION          = .3

+

+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,

+# then it will generate one additional man file for each entity

+# documented in the real man page(s). These additional files

+# only source the real man page, but without them the man command

+# would be unable to find the correct page. The default is NO.

+

+MAN_LINKS              = NO

+

+#---------------------------------------------------------------------------

+# configuration options related to the XML output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_XML tag is set to YES Doxygen will

+# generate an XML file that captures the structure of

+# the code including all documentation.

+

+GENERATE_XML           = NO

+

+# The XML_OUTPUT tag is used to specify where the XML pages will be put.

+# If a relative path is entered the value of OUTPUT_DIRECTORY will be

+# put in front of it. If left blank `xml' will be used as the default path.

+

+XML_OUTPUT             = xml

+

+# The XML_SCHEMA tag can be used to specify an XML schema,

+# which can be used by a validating XML parser to check the

+# syntax of the XML files.

+

+XML_SCHEMA             =

+

+# The XML_DTD tag can be used to specify an XML DTD,

+# which can be used by a validating XML parser to check the

+# syntax of the XML files.

+

+XML_DTD                =

+

+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will

+# dump the program listings (including syntax highlighting

+# and cross-referencing information) to the XML output. Note that

+# enabling this will significantly increase the size of the XML output.

+

+XML_PROGRAMLISTING     = YES

+

+#---------------------------------------------------------------------------

+# configuration options for the AutoGen Definitions output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will

+# generate an AutoGen Definitions (see autogen.sf.net) file

+# that captures the structure of the code including all

+# documentation. Note that this feature is still experimental

+# and incomplete at the moment.

+

+GENERATE_AUTOGEN_DEF   = NO

+

+#---------------------------------------------------------------------------

+# configuration options related to the Perl module output

+#---------------------------------------------------------------------------

+

+# If the GENERATE_PERLMOD tag is set to YES Doxygen will

+# generate a Perl module file that captures the structure of

+# the code including all documentation. Note that this

+# feature is still experimental and incomplete at the

+# moment.

+

+GENERATE_PERLMOD       = NO

+

+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate

+# the necessary Makefile rules, Perl scripts and LaTeX code to be able

+# to generate PDF and DVI output from the Perl module output.

+

+PERLMOD_LATEX          = NO

+

+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be

+# nicely formatted so it can be parsed by a human reader.  This is useful

+# if you want to understand what is going on.  On the other hand, if this

+# tag is set to NO the size of the Perl module output will be much smaller

+# and Perl will parse it just the same.

+

+PERLMOD_PRETTY         = YES

+

+# The names of the make variables in the generated doxyrules.make file

+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.

+# This is useful so different doxyrules.make files included by the same

+# Makefile don't overwrite each other's variables.

+

+PERLMOD_MAKEVAR_PREFIX =

+

+#---------------------------------------------------------------------------

+# Configuration options related to the preprocessor

+#---------------------------------------------------------------------------

+

+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will

+# evaluate all C-preprocessor directives found in the sources and include

+# files.

+

+ENABLE_PREPROCESSING   = YES

+

+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro

+# names in the source code. If set to NO (the default) only conditional

+# compilation will be performed. Macro expansion can be done in a controlled

+# way by setting EXPAND_ONLY_PREDEF to YES.

+

+MACRO_EXPANSION        = NO

+

+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES

+# then the macro expansion is limited to the macros specified with the

+# PREDEFINED and EXPAND_AS_DEFINED tags.

+

+EXPAND_ONLY_PREDEF     = NO

+

+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files

+# in the INCLUDE_PATH (see below) will be search if a #include is found.

+

+SEARCH_INCLUDES        = YES

+

+# The INCLUDE_PATH tag can be used to specify one or more directories that

+# contain include files that are not input files but should be processed by

+# the preprocessor.

+

+INCLUDE_PATH           =

+

+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard

+# patterns (like *.h and *.hpp) to filter out the header-files in the

+# directories. If left blank, the patterns specified with FILE_PATTERNS will

+# be used.

+

+INCLUDE_FILE_PATTERNS  =

+

+# The PREDEFINED tag can be used to specify one or more macro names that

+# are defined before the preprocessor is started (similar to the -D option of

+# gcc). The argument of the tag is a list of macros of the form: name

+# or name=definition (no spaces). If the definition and the = are

+# omitted =1 is assumed. To prevent a macro definition from being

+# undefined via #undef or recursively expanded use the := operator

+# instead of the = operator.

+

+PREDEFINED             =

+

+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then

+# this tag can be used to specify a list of macro names that should be expanded.

+# The macro definition that is found in the sources will be used.

+# Use the PREDEFINED tag if you want to use a different macro definition.

+

+EXPAND_AS_DEFINED      =

+

+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then

+# doxygen's preprocessor will remove all function-like macros that are alone

+# on a line, have an all uppercase name, and do not end with a semicolon. Such

+# function macros are typically used for boiler-plate code, and will confuse

+# the parser if not removed.

+

+SKIP_FUNCTION_MACROS   = YES

+

+#---------------------------------------------------------------------------

+# Configuration::additions related to external references

+#---------------------------------------------------------------------------

+

+# The TAGFILES option can be used to specify one or more tagfiles.

+# Optionally an initial location of the external documentation

+# can be added for each tagfile. The format of a tag file without

+# this location is as follows:

+#   TAGFILES = file1 file2 ...

+# Adding location for the tag files is done as follows:

+#   TAGFILES = file1=loc1 "file2 = loc2" ...

+# where "loc1" and "loc2" can be relative or absolute paths or

+# URLs. If a location is present for each tag, the installdox tool

+# does not have to be run to correct the links.

+# Note that each tag file must have a unique name

+# (where the name does NOT include the path)

+# If a tag file is not located in the directory in which doxygen

+# is run, you must also specify the path to the tagfile here.

+

+TAGFILES               =

+

+# When a file name is specified after GENERATE_TAGFILE, doxygen will create

+# a tag file that is based on the input files it reads.

+

+GENERATE_TAGFILE       =

+

+# If the ALLEXTERNALS tag is set to YES all external classes will be listed

+# in the class index. If set to NO only the inherited external classes

+# will be listed.

+

+ALLEXTERNALS           = NO

+

+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed

+# in the modules index. If set to NO, only the current project's groups will

+# be listed.

+

+EXTERNAL_GROUPS        = YES

+

+# The PERL_PATH should be the absolute path and name of the perl script

+# interpreter (i.e. the result of `which perl').

+

+PERL_PATH              = /usr/bin/perl

+

+#---------------------------------------------------------------------------

+# Configuration options related to the dot tool

+#---------------------------------------------------------------------------

+

+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will

+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base

+# or super classes. Setting the tag to NO turns the diagrams off. Note that

+# this option is superseded by the HAVE_DOT option below. This is only a

+# fallback. It is recommended to install and use dot, since it yields more

+# powerful graphs.

+

+CLASS_DIAGRAMS         = YES

+

+# If set to YES, the inheritance and collaboration graphs will hide

+# inheritance and usage relations if the target is undocumented

+# or is not a class.

+

+HIDE_UNDOC_RELATIONS   = YES

+

+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is

+# available from the path. This tool is part of Graphviz, a graph visualization

+# toolkit from AT&T and Lucent Bell Labs. The other options in this section

+# have no effect if this option is set to NO (the default)

+

+HAVE_DOT               = YES

+

+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen

+# will generate a graph for each documented class showing the direct and

+# indirect inheritance relations. Setting this tag to YES will force the

+# the CLASS_DIAGRAMS tag to NO.

+

+CLASS_GRAPH            = YES

+

+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen

+# will generate a graph for each documented class showing the direct and

+# indirect implementation dependencies (inheritance, containment, and

+# class references variables) of the class with other documented classes.

+

+COLLABORATION_GRAPH    = YES

+

+# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen

+# will generate a graph for groups, showing the direct groups dependencies

+

+GROUP_GRAPHS           = YES

+

+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and

+# collaboration diagrams in a style similar to the OMG's Unified Modeling

+# Language.

+

+UML_LOOK               = NO

+

+# If set to YES, the inheritance and collaboration graphs will show the

+# relations between templates and their instances.

+

+TEMPLATE_RELATIONS     = NO

+

+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT

+# tags are set to YES then doxygen will generate a graph for each documented

+# file showing the direct and indirect include dependencies of the file with

+# other documented files.

+

+INCLUDE_GRAPH          = YES

+

+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and

+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each

+# documented header file showing the documented files that directly or

+# indirectly include this file.

+

+INCLUDED_BY_GRAPH      = YES

+

+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will

+# generate a call dependency graph for every global function or class method.

+# Note that enabling this option will significantly increase the time of a run.

+# So in most cases it will be better to enable call graphs for selected

+# functions only using the \callgraph command.

+

+CALL_GRAPH             = NO

+

+# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will

+# generate a caller dependency graph for every global function or class method.

+# Note that enabling this option will significantly increase the time of a run.

+# So in most cases it will be better to enable caller graphs for selected

+# functions only using the \callergraph command.

+

+CALLER_GRAPH           = NO

+

+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen

+# will graphical hierarchy of all classes instead of a textual one.

+

+GRAPHICAL_HIERARCHY    = YES

+

+# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES

+# then doxygen will show the dependencies a directory has on other directories

+# in a graphical way. The dependency relations are determined by the #include

+# relations between the files in the directories.

+

+DIRECTORY_GRAPH        = YES

+

+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images

+# generated by dot. Possible values are png, jpg, or gif

+# If left blank png will be used.

+

+DOT_IMAGE_FORMAT       = png

+

+# The tag DOT_PATH can be used to specify the path where the dot tool can be

+# found. If left blank, it is assumed the dot tool can be found in the path.

+

+DOT_PATH               =

+

+# The DOTFILE_DIRS tag can be used to specify one or more directories that

+# contain dot files that are included in the documentation (see the

+# \dotfile command).

+

+DOTFILE_DIRS           =

+

+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width

+# (in pixels) of the graphs generated by dot. If a graph becomes larger than

+# this value, doxygen will try to truncate the graph, so that it fits within

+# the specified constraint. Beware that most browsers cannot cope with very

+# large images.

+

+MAX_DOT_GRAPH_WIDTH    = 1024

+

+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height

+# (in pixels) of the graphs generated by dot. If a graph becomes larger than

+# this value, doxygen will try to truncate the graph, so that it fits within

+# the specified constraint. Beware that most browsers cannot cope with very

+# large images.

+

+MAX_DOT_GRAPH_HEIGHT   = 1024

+

+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the

+# graphs generated by dot. A depth value of 3 means that only nodes reachable

+# from the root by following a path via at most 3 edges will be shown. Nodes

+# that lay further from the root node will be omitted. Note that setting this

+# option to 1 or 2 may greatly reduce the computation time needed for large

+# code bases. Also note that a graph may be further truncated if the graph's

+# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH

+# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),

+# the graph is not depth-constrained.

+

+MAX_DOT_GRAPH_DEPTH    = 0

+

+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent

+# background. This is disabled by default, which results in a white background.

+# Warning: Depending on the platform used, enabling this option may lead to

+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to

+# read).

+

+DOT_TRANSPARENT        = NO

+

+# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output

+# files in one run (i.e. multiple -o and -T options on the command line). This

+# makes dot run faster, but since only newer versions of dot (>1.8.10)

+# support this, this feature is disabled by default.

+

+DOT_MULTI_TARGETS      = NO

+

+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will

+# generate a legend page explaining the meaning of the various boxes and

+# arrows in the dot generated graphs.

+

+GENERATE_LEGEND        = YES

+

+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will

+# remove the intermediate dot files that are used to generate

+# the various graphs.

+

+DOT_CLEANUP            = YES

+

+#---------------------------------------------------------------------------

+# Configuration::additions related to the search engine

+#---------------------------------------------------------------------------

+

+# The SEARCHENGINE tag specifies whether or not a search engine should be

+# used. If set to NO the values of all tags below this one will be ignored.

+

+SEARCHENGINE           = NO