Added xcb-proto-1.5.tar.gz. Removed old files.

51 files changed, 18064 insertions, 0 deletions

diff --git a/libxcb/xcb-proto/COPYING b/libxcb/xcb-proto/COPYING
new file mode 100644
index 000000000..54bfbe5b0
--- /dev/null
+++ b/libxcb/xcb-proto/COPYING
@@ -0,0 +1,30 @@
+Copyright (C) 2001-2006 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person
+obtaining a copy of this software and associated
+documentation files (the "Software"), to deal in the
+Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute,
+sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so,
+subject to the following conditions:
+
+The above copyright notice and this permission notice shall
+be included in all copies or substantial portions of the
+Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
+PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS
+BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors
+or their institutions shall not be used in advertising or
+otherwise to promote the sale, use or other dealings in this
+Software without prior written authorization from the
+authors.
diff --git a/libxcb/xcb-proto/INSTALL b/libxcb/xcb-proto/INSTALL
new file mode 100644
index 000000000..54caf7c19
--- /dev/null
+++ b/libxcb/xcb-proto/INSTALL
@@ -0,0 +1,229 @@
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/libxcb/xcb-proto/Makefile.am b/libxcb/xcb-proto/Makefile.am
new file mode 100644
index 000000000..c272c6237
--- /dev/null
+++ b/libxcb/xcb-proto/Makefile.am
@@ -0,0 +1,6 @@
+SUBDIRS = src xcbgen
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = xcb-proto.pc
+
+EXTRA_DIST=doc xcb-proto.pc.in
diff --git a/libxcb/xcb-proto/Makefile.in b/libxcb/xcb-proto/Makefile.in
new file mode 100644
index 000000000..ad4e26a23
--- /dev/null
+++ b/libxcb/xcb-proto/Makefile.in
@@ -0,0 +1,610 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/xcb-proto.pc.in \
+	$(top_srcdir)/configure COPYING INSTALL NEWS TODO install-sh \
+	missing py-compile
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = xcb-proto.pc
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
+pkgconfigDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+XMLLINT = @XMLLINT@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xcbincludedir = @xcbincludedir@
+SUBDIRS = src xcbgen
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = xcb-proto.pc
+EXTRA_DIST = doc xcb-proto.pc.in
+all: all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+xcb-proto.pc: $(top_builddir)/config.status $(srcdir)/xcb-proto.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-generic distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+	uninstall-pkgconfigDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libxcb/xcb-proto/NEWS b/libxcb/xcb-proto/NEWS
new file mode 100644
index 000000000..e9a6a51cb
--- /dev/null
+++ b/libxcb/xcb-proto/NEWS
@@ -0,0 +1,140 @@
+Release 1.5 (2009-05-09)
+========================
+* Add support for mod mask Any
+* Add and use altenum (non-exhaustive enum)
+* Tweak some XInput specs
+* Fix milter spelling
+* Correct the length calculation for the value field of GetPropertyReply
+* xtest: rename window field to root
+* randr: add version 1.3 requests
+* shm: fix ShmCompletion event
+
+Release 1.4 (2009-02-16)
+========================
+* Add explicit padding in various protocol description.
+* Associate fields with the enum which describes their allowed values.
+
+Release 1.3 (2008-12-10)
+========================
+Explicit padding was added in various protocol description.
+
+Protcol fixes:
+* RandR
+* X proto
+* Change CARD8 to char when specs requires STRING8
+
+Release 1.2 (2008-07-17)
+========================
+New extensions:
+* XInput 1.4
+* SELinux 1.0
+
+Various fixes in protocol description:
+* X proto
+* X-Resource
+* XVMC
+* GLX
+
+New Python parser language-independent parts.
+
+Release 1.1 (2007-11-04)
+========================
+
+Incompatible change to the XML schema: rather than special-casing the
+treatment of protocol extension names, use the new extension-multiword
+attribute.  Normally, XCB prefixes C extension functions with
+xcb_extname_.  However, some of the existing extensions used multi-word
+names, such as xcb_big_requests_ or xcb_xc_misc_. Those extensions now
+use this attribute to match their existing defined API.  This allows the
+XCB code generator to avoid special-casing those extension names.
+
+Protocol updates:
+* Update DAMAGE to 1.1
+* Update RandR to version 1.2
+
+Bug fixes:
+* fix XSync Initialize call
+* Update autogen.sh to one that does objdir != srcdir.
+
+
+Release 1.0 (2006-11-23)
+========================
+
+The "Thanksgiving" release: We feel thankful to have it released.
+
+* Fix Bug #8990: randr type fixes
+* Fixed screen parameter type in several GLX requests to use CARD32 instead
+  of the SCREEN structure.
+* Corrected valueparam arguments to attribute lists in several requests and
+  a reply.
+* Estethic change for attribute parameter name
+* Remove support for the <localfield> tag: nothing needs it.
+* Fix Bug #8973: In UngrabKey, the 'key' field should have type KEYCODE, not
+  the more general CARD8.
+
+
+Release 1.0 RC3 (2006-11-02)
+============================
+
+* Add support for the Xinerama extension, version 1.1
+* Protocol descriptions now document the major and minor version numbers
+  of the extension version they support, through major-version and
+  minor-version attributes on the xcb tag.  XML Schema updated
+  accordingly.
+* Minor source reorganization: Now that the extensions do not get
+  installed to an extensions/ subdirectory, move them out of the
+  extensions/ subdirectory in the source as well.
+* Various protocol description fixes:
+    * Add REPEAT enumeration to Render extension to fix bug #8535
+    * Fix core xproto GrabMode enumeration (reported by Yang JianJun)
+    * Fix core xproto cap style enumeration (bug #8857).
+
+
+Release 1.0 RC2 (2006-10-07)
+============================
+
+* Add <import>xproto</import> explicitly to extensions that use xproto;
+  this goes along with the change in the code generator for libxcb 1.0 RC2 to
+  stop implicitly importing xproto.
+* Change "union" to "xidunion" for XID unions like DRAWABLE and FONTABLE,
+  so that the code generator can more easily declare these XID unions as
+  integer typedefs rather than unions.
+* Replace structures attempting to provide C type safety with CARD32 typedefs
+* render.xml no longer describes the CompositeGlyphs* requests as taking lists
+  of complicated unions of structures of lists: it says instead that they take
+  a LISTofBYTE. The caller is responsible for constructing an appropriate
+  sequence of glyph elements. Previously, the requests could not actually be
+  used because XCB did not correctly compute the length of the provided data.
+
+
+Release 1.0 RC1 (2006-09-25)
+============================
+
+The Great XCB Renaming
+----------------------
+
+* Rename shape_op and shape_kind to drop the "shape_" prefix, since
+  otherwise these types end up as xcb_shape_shape_{op,kind}_t.
+* Remove leading underscores from enums in the GLX protocol description,
+  previously needed to ensure a word separator, but now redundant.
+* The XML-XCB protocol descriptions have moved to /usr/share/xcb, with
+  extension descriptions no longer relegated to an extensions/ subdirectory.
+
+GIT Repository split
+--------------------
+
+Previously, several XCB-related projects all existed under the umbrella
+of a single monolithic GIT repository with per-project subdirectories.
+We have split this repository into individual per-project repositories.
+
+Josh Triplett and Jamey Sharp wrote a tool called git-split to
+accomplish this repository split. git-split reconstructs the history of
+a sub-project previously stored in a subdirectory of a larger
+repository. It constructs new commit objects based on the existing tree
+objects for the subtree in each commit, and discards commits which do
+not affect the history of the sub-project, as well as merges made
+unnecessary due to these discarded commits.
+
+We would like to acknowledge the work of the gobby team in creating a
+collaborative editor which greatly aided the development of git-split
+(as well as these release notes).
diff --git a/libxcb/xcb-proto/README b/libxcb/xcb-proto/README
new file mode 100644
index 000000000..22d7debca
--- /dev/null
+++ b/libxcb/xcb-proto/README
@@ -0,0 +1,47 @@
+About xcb-proto
+===============
+
+xcb-proto provides the XML-XCB protocol descriptions that libxcb uses to
+generate the majority of its code and API. We provide them separately
+from libxcb to allow reuse by other projects, such as additional
+language bindings, protocol dissectors, or documentation generators.
+
+This separation between the XCB transport layer and the
+automatically-generated protocol layer also makes it far easier to write
+new extensions. With the Xlib infrastructure, client-side support for
+new extensions requires significant duplication of effort. With XCB and
+the XML-XCB protocol descriptions, client-side support for a new
+extension requires only an XML description of the extension, and not a
+single line of code.
+
+Python libraries: xcb-proto also contains language-independent Python
+libraries that are used to parse an XML description and create objects
+used by Python code generators in individual language bindings.  These
+libraries are installed into $(prefix)/lib/pythonX.X/site-packages.  If
+this location is not on your system's Python path, scripts that import
+them will fail with import errors.  In this case you must add the
+install location to your Python path by creating a file with a `.pth'
+extension in a directory that _is_ on the Python path, and put the
+path to the install location in that file.  For example, on my system
+there is a file named 'local.pth' in /usr/lib/python2.5/site-packages,
+which contains '/usr/local/lib/python2.5/site-packages'.  Note that 
+this is only necessary on machines where XCB is being built. 
+
+Please report any issues you find to the freedesktop.org bug tracker,
+at:
+
+	<https://bugs.freedesktop.org/enter_bug.cgi?product=XCB>
+
+Discussion about XCB occurs on the XCB mailing list:
+
+        <mailto:xcb at lists.freedesktop.org>
+        <http://lists.freedesktop.org/mailman/listinfo/xcb>
+
+You can obtain the latest development versions of XCB using GIT.
+For anonymous checkouts, use:
+
+        git clone git://anongit.freedesktop.org/git/xcb/proto
+
+For developers, use:
+
+        git clone git+ssh://git.freedesktop.org/git/xcb/proto
diff --git a/libxcb/xcb-proto/TODO b/libxcb/xcb-proto/TODO
new file mode 100644
index 000000000..add693c48
--- /dev/null
+++ b/libxcb/xcb-proto/TODO
@@ -0,0 +1,45 @@
+Last Updated: 2006-04-27
+
+Extension Status:
+
+X - Present, tested, works.
+U - Present, untested.
+I - Incomplete.
+
+X BIG-REQUESTS
+X COMPOSITE
+X DAMAGE
+  DOUBLE-BUFFER
+X DPMS
+  Extended-Visual-Information
+X GLX
+  LBX
+X MIT-SCREEN-SAVER
+X MIT-SHM
+  MIT-SUNDRY-NONSTANDARD
+  Multi-Buffering
+X RANDR
+X RECORD
+X RENDER
+  SECURITY
+  SGI-GLX
+X SHAPE
+X SYNC
+  TOG-CUP
+X X-Resource
+  XC-APPGROUP
+X XC-MISC
+X XEVIE
+X XFIXES
+  XFree86-Bigfont
+  XFree86-DGA
+X XFree86-DRI
+  XFree86-Misc
+  XFree86-VidModeExtension
+  XINERAMA
+  XInputExtension
+  XKEYBOARD
+I XpExtension (XPRINT)
+X XTEST
+X XVideo
+U XVideo-MotionCompensation
diff --git a/libxcb/xcb-proto/aclocal.m4 b/libxcb/xcb-proto/aclocal.m4
new file mode 100644
index 000000000..9f7b54c76
--- /dev/null
+++ b/libxcb/xcb-proto/aclocal.m4
@@ -0,0 +1,770 @@
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10.2], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 13
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# ---------------------------------------------------------------------------
+# Adds support for distributing Python modules and packages.  To
+# install modules, copy them to $(pythondir), using the python_PYTHON
+# automake variable.  To install a package with the same name as the
+# automake package, install to $(pkgpythondir), or use the
+# pkgpython_PYTHON automake variable.
+#
+# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
+# locations to install python extension modules (shared libraries).
+# Another macro is required to find the appropriate flags to compile
+# extension modules.
+#
+# If your package is configured with a different prefix to python,
+# users will have to add the install directory to the PYTHONPATH
+# environment variable, or create a .pth file (see the python
+# documentation for details).
+#
+# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
+# cause an error if the version of python installed on the system
+# doesn't meet the requirement.  MINIMUM-VERSION should consist of
+# numbers and dots only.
+AC_DEFUN([AM_PATH_PYTHON],
+ [
+  dnl Find a Python interpreter.  Python versions prior to 1.5 are not
+  dnl supported because the default installation locations changed from
+  dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages
+  dnl in 1.5.
+  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
+                    [python python2 python2.5 python2.4 python2.3 python2.2 dnl
+python2.1 python2.0 python1.6 python1.5])
+
+  m4_if([$1],[],[
+    dnl No version check is needed.
+    # Find any Python interpreter.
+    if test -z "$PYTHON"; then
+      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
+    fi
+    am_display_PYTHON=python
+  ], [
+    dnl A version check is needed.
+    if test -n "$PYTHON"; then
+      # If the user set $PYTHON, use it and don't search something else.
+      AC_MSG_CHECKING([whether $PYTHON version >= $1])
+      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
+			      [AC_MSG_RESULT(yes)],
+			      [AC_MSG_ERROR(too old)])
+      am_display_PYTHON=$PYTHON
+    else
+      # Otherwise, try each interpreter until we find one that satisfies
+      # VERSION.
+      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
+	[am_cv_pathless_PYTHON],[
+	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
+	  test "$am_cv_pathless_PYTHON" = none && break
+	  AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
+	done])
+      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
+      if test "$am_cv_pathless_PYTHON" = none; then
+	PYTHON=:
+      else
+        AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
+      fi
+      am_display_PYTHON=$am_cv_pathless_PYTHON
+    fi
+  ])
+
+  if test "$PYTHON" = :; then
+  dnl Run any user-specified action, or abort.
+    m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
+  else
+
+  dnl Query Python for its version number.  Getting [:3] seems to be
+  dnl the best way to do this; it's what "site.py" does in the standard
+  dnl library.
+
+  AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
+    [am_cv_python_version=`$PYTHON -c "import sys; print sys.version[[:3]]"`])
+  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])
+
+  dnl Use the values of $prefix and $exec_prefix for the corresponding
+  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
+  dnl distinct variables so they can be overridden if need be.  However,
+  dnl general consensus is that you shouldn't need this ability.
+
+  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
+  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])
+
+  dnl At times (like when building shared libraries) you may want
+  dnl to know which OS platform Python thinks this is.
+
+  AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
+    [am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`])
+  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])
+
+
+  dnl Set up 4 directories:
+
+  dnl pythondir -- where to install python scripts.  This is the
+  dnl   site-packages directory, not the python standard library
+  dnl   directory like in previous automake betas.  This behavior
+  dnl   is more consistent with lispdir.m4 for example.
+  dnl Query distutils for this directory.  distutils does not exist in
+  dnl Python 1.5, so we fall back to the hardcoded directory if it
+  dnl doesn't work.
+  AC_CACHE_CHECK([for $am_display_PYTHON script directory],
+    [am_cv_python_pythondir],
+    [am_cv_python_pythondir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(0,0,prefix='$PYTHON_PREFIX')" 2>/dev/null ||
+     echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`])
+  AC_SUBST([pythondir], [$am_cv_python_pythondir])
+
+  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
+  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
+  dnl   more consistent with the rest of automake.
+
+  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])
+
+  dnl pyexecdir -- directory for installing python extension modules
+  dnl   (shared libraries)
+  dnl Query distutils for this directory.  distutils does not exist in
+  dnl Python 1.5, so we fall back to the hardcoded directory if it
+  dnl doesn't work.
+  AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
+    [am_cv_python_pyexecdir],
+    [am_cv_python_pyexecdir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(1,0,prefix='$PYTHON_EXEC_PREFIX')" 2>/dev/null ||
+     echo "${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages"`])
+  AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])
+
+  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)
+
+  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])
+
+  dnl Run any user-specified action.
+  $2
+  fi
+
+])
+
+
+# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
+# ---------------------------------------------------------------------------
+# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
+# Run ACTION-IF-FALSE otherwise.
+# This test uses sys.hexversion instead of the string equivalent (first
+# word of sys.version), in order to cope with versions such as 2.2c1.
+# hexversion has been introduced in Python 1.5.2; it's probably not
+# worth to support older versions (1.5.1 was released on October 31, 1998).
+AC_DEFUN([AM_PYTHON_CHECK_VERSION],
+ [prog="import sys, string
+# split strings by '.' and convert to numeric.  Append some zeros
+# because we need at least 4 digits for the hex conversion.
+minver = map(int, string.split('$2', '.')) + [[0, 0, 0]]
+minverhex = 0
+for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[[i]]
+sys.exit(sys.hexversion < minverhex)"
+  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
diff --git a/libxcb/xcb-proto/configure b/libxcb/xcb-proto/configure
new file mode 100644
index 000000000..a96408341
--- /dev/null
+++ b/libxcb/xcb-proto/configure
@@ -0,0 +1,3624 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.63 for XCB Proto 1.5.
+#
+# Report bugs to <xcb@lists.freedesktop.org>.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+
+  if test $as_have_required = yes &&	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  case $as_dir in
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+	done
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell bug-autoconf@gnu.org about your system,
+  echo including any error possibly output before this message.
+  echo This can help us improve future autoconf versions.
+  echo Configuration will now proceed without shell functions.
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME='XCB Proto'
+PACKAGE_TARNAME='xcb-proto'
+PACKAGE_VERSION='1.5'
+PACKAGE_STRING='XCB Proto 1.5'
+PACKAGE_BUGREPORT='xcb@lists.freedesktop.org'
+
+ac_unique_file="xcb-proto.pc.in"
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+xcbincludedir
+pkgpyexecdir
+pyexecdir
+pkgpythondir
+pythondir
+PYTHON_PLATFORM
+PYTHON_EXEC_PREFIX
+PYTHON_PREFIX
+PYTHON_VERSION
+PYTHON
+HAVE_XMLLINT_FALSE
+HAVE_XMLLINT_TRUE
+XMLLINT
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+   { (exit 1); exit 1; }; }
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+   { (exit 1); exit 1; }; } ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { $as_echo "$as_me: error: working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
+   { (exit 1); exit 1; }; }
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures XCB Proto 1.5 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/xcb-proto]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of XCB Proto 1.5:";;
+   esac
+  cat <<\_ACEOF
+
+Report bugs to <xcb@lists.freedesktop.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+XCB Proto configure 1.5
+generated by GNU Autoconf 2.63
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by XCB Proto $as_me 1.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  $as_echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args '$ac_arg'"
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test -r "$ac_site_file"; then
+    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+am__api_version='1.10'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+$as_echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='xcb-proto'
+ VERSION='1.5'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# Extract the first word of "xmllint", so it can be a program name with args.
+set dummy xmllint; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_XMLLINT+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  case $XMLLINT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_XMLLINT="$XMLLINT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_path_XMLLINT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_XMLLINT" && ac_cv_path_XMLLINT="no"
+  ;;
+esac
+fi
+XMLLINT=$ac_cv_path_XMLLINT
+if test -n "$XMLLINT"; then
+  { $as_echo "$as_me:$LINENO: result: $XMLLINT" >&5
+$as_echo "$XMLLINT" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$XMLLINT" != "xno"; then
+  HAVE_XMLLINT_TRUE=
+  HAVE_XMLLINT_FALSE='#'
+else
+  HAVE_XMLLINT_TRUE='#'
+  HAVE_XMLLINT_FALSE=
+fi
+
+if test "$XMLLINT" = "no"; then
+   { $as_echo "$as_me:$LINENO: WARNING: xmllint not found; unable to validate against schema." >&5
+$as_echo "$as_me: WARNING: xmllint not found; unable to validate against schema." >&2;}
+fi
+
+
+
+
+
+        if test -n "$PYTHON"; then
+      # If the user set $PYTHON, use it and don't search something else.
+      { $as_echo "$as_me:$LINENO: checking whether $PYTHON version >= 2.5" >&5
+$as_echo_n "checking whether $PYTHON version >= 2.5... " >&6; }
+      prog="import sys, string
+# split strings by '.' and convert to numeric.  Append some zeros
+# because we need at least 4 digits for the hex conversion.
+minver = map(int, string.split('2.5', '.')) + [0, 0, 0]
+minverhex = 0
+for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[i]
+sys.exit(sys.hexversion < minverhex)"
+  if { echo "$as_me:$LINENO: $PYTHON -c "$prog"" >&5
+   ($PYTHON -c "$prog") >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+  { $as_echo "$as_me:$LINENO: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { { $as_echo "$as_me:$LINENO: error: too old" >&5
+$as_echo "$as_me: error: too old" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+      am_display_PYTHON=$PYTHON
+    else
+      # Otherwise, try each interpreter until we find one that satisfies
+      # VERSION.
+      { $as_echo "$as_me:$LINENO: checking for a Python interpreter with version >= 2.5" >&5
+$as_echo_n "checking for a Python interpreter with version >= 2.5... " >&6; }
+if test "${am_cv_pathless_PYTHON+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+
+	for am_cv_pathless_PYTHON in python python2 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0 python1.6 python1.5 none; do
+	  test "$am_cv_pathless_PYTHON" = none && break
+	  prog="import sys, string
+# split strings by '.' and convert to numeric.  Append some zeros
+# because we need at least 4 digits for the hex conversion.
+minver = map(int, string.split('2.5', '.')) + [0, 0, 0]
+minverhex = 0
+for i in xrange(0, 4): minverhex = (minverhex << 8) + minver[i]
+sys.exit(sys.hexversion < minverhex)"
+  if { echo "$as_me:$LINENO: $am_cv_pathless_PYTHON -c "$prog"" >&5
+   ($am_cv_pathless_PYTHON -c "$prog") >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+  break
+fi
+
+	done
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_pathless_PYTHON" >&5
+$as_echo "$am_cv_pathless_PYTHON" >&6; }
+      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
+      if test "$am_cv_pathless_PYTHON" = none; then
+	PYTHON=:
+      else
+        # Extract the first word of "$am_cv_pathless_PYTHON", so it can be a program name with args.
+set dummy $am_cv_pathless_PYTHON; ac_word=$2
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_PYTHON+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  case $PYTHON in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PYTHON="$PYTHON" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_path_PYTHON="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PYTHON=$ac_cv_path_PYTHON
+if test -n "$PYTHON"; then
+  { $as_echo "$as_me:$LINENO: result: $PYTHON" >&5
+$as_echo "$PYTHON" >&6; }
+else
+  { $as_echo "$as_me:$LINENO: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+      fi
+      am_display_PYTHON=$am_cv_pathless_PYTHON
+    fi
+
+
+  if test "$PYTHON" = :; then
+      { { $as_echo "$as_me:$LINENO: error: no suitable Python interpreter found" >&5
+$as_echo "$as_me: error: no suitable Python interpreter found" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+
+
+  { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON version" >&5
+$as_echo_n "checking for $am_display_PYTHON version... " >&6; }
+if test "${am_cv_python_version+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_python_version=`$PYTHON -c "import sys; print sys.version[:3]"`
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_python_version" >&5
+$as_echo "$am_cv_python_version" >&6; }
+  PYTHON_VERSION=$am_cv_python_version
+
+
+
+  PYTHON_PREFIX='${prefix}'
+
+  PYTHON_EXEC_PREFIX='${exec_prefix}'
+
+
+
+  { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON platform" >&5
+$as_echo_n "checking for $am_display_PYTHON platform... " >&6; }
+if test "${am_cv_python_platform+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_python_platform=`$PYTHON -c "import sys; print sys.platform"`
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_python_platform" >&5
+$as_echo "$am_cv_python_platform" >&6; }
+  PYTHON_PLATFORM=$am_cv_python_platform
+
+
+
+
+                { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON script directory" >&5
+$as_echo_n "checking for $am_display_PYTHON script directory... " >&6; }
+if test "${am_cv_python_pythondir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_python_pythondir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(0,0,prefix='$PYTHON_PREFIX')" 2>/dev/null ||
+     echo "$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages"`
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_python_pythondir" >&5
+$as_echo "$am_cv_python_pythondir" >&6; }
+  pythondir=$am_cv_python_pythondir
+
+
+
+  pkgpythondir=\${pythondir}/$PACKAGE
+
+
+            { $as_echo "$as_me:$LINENO: checking for $am_display_PYTHON extension module directory" >&5
+$as_echo_n "checking for $am_display_PYTHON extension module directory... " >&6; }
+if test "${am_cv_python_pyexecdir+set}" = set; then
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_python_pyexecdir=`$PYTHON -c "from distutils import sysconfig; print sysconfig.get_python_lib(1,0,prefix='$PYTHON_EXEC_PREFIX')" 2>/dev/null ||
+     echo "${PYTHON_EXEC_PREFIX}/lib/python${PYTHON_VERSION}/site-packages"`
+fi
+{ $as_echo "$as_me:$LINENO: result: $am_cv_python_pyexecdir" >&5
+$as_echo "$am_cv_python_pyexecdir" >&6; }
+  pyexecdir=$am_cv_python_pyexecdir
+
+
+
+  pkgpyexecdir=\${pyexecdir}/$PACKAGE
+
+
+
+  fi
+
+
+
+xcbincludedir='${datadir}/xcb'
+
+
+ac_config_files="$ac_config_files Makefile src/Makefile xcbgen/Makefile xcb-proto.pc"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${HAVE_XMLLINT_TRUE}" && test -z "${HAVE_XMLLINT_FALSE}"; then
+  { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_XMLLINT\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+$as_echo "$as_me: error: conditional \"HAVE_XMLLINT\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in
+  *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by XCB Proto $as_me 1.5, which was
+generated by GNU Autoconf 2.63.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTION]... [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+XCB Proto config.status 1.5
+configured by $0, generated by GNU Autoconf 2.63,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { $as_echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+    "xcbgen/Makefile") CONFIG_FILES="$CONFIG_FILES xcbgen/Makefile" ;;
+    "xcb-proto.pc") CONFIG_FILES="$CONFIG_FILES xcb-proto.pc" ;;
+
+  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} ||
+{
+   $as_echo "$as_me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr='
'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+   { (exit 1); exit 1; }; }
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      ac_file_inputs="$ac_file_inputs '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; } ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+   { (exit 1); exit 1; }; }
+ ;;
+
+
+
+  esac
+
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/libxcb/xcb-proto/configure.ac b/libxcb/xcb-proto/configure.ac
new file mode 100644
index 000000000..f3a489e2b
--- /dev/null
+++ b/libxcb/xcb-proto/configure.ac
@@ -0,0 +1,22 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.57)
+AC_INIT([XCB Proto],
+        1.5,
+        [xcb@lists.freedesktop.org])
+AC_CONFIG_SRCDIR([xcb-proto.pc.in])
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+
+AC_PATH_PROG(XMLLINT, xmllint, no)
+AM_CONDITIONAL(HAVE_XMLLINT, test "x$XMLLINT" != "xno")
+if test "$XMLLINT" = "no"; then
+   AC_MSG_WARN([xmllint not found; unable to validate against schema.])
+fi
+
+AM_PATH_PYTHON([2.5])
+
+xcbincludedir='${datadir}/xcb'
+AC_SUBST(xcbincludedir)
+
+AC_OUTPUT([Makefile src/Makefile xcbgen/Makefile xcb-proto.pc])
diff --git a/libxcb/xcb-proto/doc/xml-xcb.txt b/libxcb/xcb-proto/doc/xml-xcb.txt
new file mode 100644
index 000000000..feb99844f
--- /dev/null
+++ b/libxcb/xcb-proto/doc/xml-xcb.txt
@@ -0,0 +1,258 @@
+                                  xcb/proto
+
+Description
+===========
+
+xcb/proto is a set of XML files describing the  X Window System protocol
+It is designed for use with libxcb, the X C binding
+<http://xcb.freedesktop.org/>.  xcb/proto consists of:
+
+xcb.xsd      An XML Schema defining the data format for describing the X
+             protocol.
+
+*.py         Code generator helpers that read the protocol descriptions
+             into python structures. See libxcb for example usage.
+
+*.xml        XML descriptions of the core X protocol and many extensions.
+
+
+Generating C bindings
+=====================
+
+See libxcb <http://cgit.freedesktop.org/xcb/libxcb/>.
+
+
+Protocol Description Format
+===========================
+
+Root element
+------------
+
+<xcb header="string" extension-name="string" extension-xname="string">
+  top-level elements
+</xcb>
+
+  This is the root element of a protocol description.  The attributes are all
+  various forms of the extension name.  header is the basename of the XML
+  protocol description file, which will be used as the basename for generated
+  bindings as well.  extension-name is the name of the extension in InterCaps,
+  which will be used in the names of functions.  extension-xname is the name
+  of the extension as passed to QueryExtension.
+
+  As an example, the XML-XCB description for the GO-FASTER extension would use
+  the root element <xcb header="gofaster" extension-name="GoFaster"
+  extension-xname="GO-FASTER">; as a result, C bindings will be put in
+  gofaster.h and gofaster.c, extension functions will be named
+  XCBGoFasterFunctionName, and the extension initialization will call
+  QueryExtension with the name "GO-FASTER".
+
+  This element can contain any number of the elements listed in the section
+  "Top-Level Elements" below.
+
+
+Top-Level Elements
+------------------
+
+<import>header_name</import>
+
+  The import element allows the protocol description to reference types
+  declared in another extension.  The content is be the basename of the
+  extension XML file, which is also the header attribute of the extension's
+  root node.  Note that types from xproto are automatically available, without
+  explicitly importing them.
+
+<struct name="identifier">structure contents</struct>
+
+  This element represents a data structure.  The name attribute gives the name
+  of the structure.  The content represents the fields of the structure, and
+  consists of one or more of the field, pad, and list elements described in
+  the section "Structure Contents" below.
+
+<union name="identifier">structure contents</union>
+
+  This element represents a union of data types, which can hold one value of
+  any of those types.  The name attribute gives the name of the union.  The
+  content represents the fields of the union, and consists of one or more of
+  the field and pad elements described in the section "Structure Contents
+  below".
+
+<xidtype name="identifier" />
+
+  This element represents an identifier for a particular type of resource.
+  The name attribute gives the name of the new type.
+
+<enum name="identifier">
+  <item name="identifier">[optional expression]</item>
+  ...
+</enum>
+
+  The enum element represents an enumeration type, which can take on any of
+  the values given by the contained item elements.  The name attribute on the
+  enum gives the name of the enumerated type.
+
+  The item element represents one possible value of an enumerated type.  The
+  name attribute on the item gives the name of that value, and the optional
+  content is an expression giving the numeric value.  If the expression is
+  omitted, the value will be one more than that of the previous item, or 0 for
+  the first item.
+
+<typedef oldname="identifier" newname="identifier" />
+
+  The typedef element declares the type given by the newname attribute to be
+  an alias for the type given by the oldname attribute.
+
+<request name="identifier" opcode="integer" [combine-adjacent="true"]>
+  structure contents
+  [<reply>structure contents</reply>]
+</request>
+
+  The request element represents an X protocol request.  The name attribute
+  gives the name of the request, and the opcode attribute gives the numeric
+  request code.  The content of the request element represents the fields in
+  the request, and consists of one or more of any of the elements listed in
+  the "Structure Contents" section below.  Note that for requests in the core
+  protocol, the first field in the request goes into the one-byte gap between
+  the major opcode and the length; if the request does not have any data in
+  that gap, put a one byte pad as the first element.  Extension requests
+  always have this gap filled with the minor opcode.
+
+  The optional reply element is present if the request has a reply.  The
+  content of the reply element represents the fields in the reply, and
+  consists of zero or more of the field, pad, and list elements listed in the
+  "Structure Contents" section below.  Note that the first field in the reply
+  always goes into the one-byte gap between the response type and the sequence
+  number; if the reply does not have any data in that gap, put a one byte pad
+  as the first element.
+
+  If the optional combine-adjacent attribute is true, multiple adjacent
+  requests of the same type may be combined into a single request without
+  affecting the semantics of the requests.
+
+<event name="identifier" number="integer" [no-sequence-number="true"]>
+  structure contents
+</event>
+
+  This element represents an X protocol event.  The name attribute gives the
+  name of the event, and the number attribute gives the event number.  The
+  content of the event element represents the fields in the event, and
+  consists of zero or more of the field, pad, and list elements listed in the
+  "Structure Contents" section below.
+
+  If the optional no-sequence-number attribute is true, the event does not
+  include a sequence number.  This is a special-case for the KeymapNotify
+  event in the core protocol, and should not be used in any other event.
+
+<error name="identifier" number="integer">
+  structure contents
+</error>
+
+  This element represents an X protocol error.  The name attribute gives the
+  name of the error, and the number attribute gives the error number.  The
+  content of the error element represents the fields in the error, and
+  consists of zero or more of the field, pad, and list elements listed in the
+  "Structure Contents" section below.
+
+<eventcopy name="identifier" number="identifier" ref="identifier" />
+
+  This element creates an alias for the event named in the ref attribute, with
+  the new name given in the name attribute, and the new event number given in
+  the number attribute.
+
+<errorcopy name="identifier" number="identifier" ref="identifier" />
+
+  This element creates an alias for the error named in the ref attribute, with
+  the new name given in the name attribute, and the new error number given in
+  the number attribute.
+
+
+Structure Contents
+------------------
+
+Note: "type" attributes below refer to types defined by previous elements,
+either in the current extension, xproto, or one of the imported extensions.
+The type name must refer to only one possible type; if more than one type
+matches, an error occurs.  To avoid this, the type may be explicitly prefixed
+with a namespace, which should be the value of the header attribute on the
+protocol description containing the desired type.  The namespace and type are
+separated by a single colon.  For example, to refer to the PIXMAP type defined
+in glx rather than the one defined in xproto, use type="glx:PIXMAP" rather
+than type="PIXMAP".
+
+Note: Most of the below may optionally contain an enum, altenum, or mask
+attribute, which follows the above rules for "type". "enum" is an exhaustive
+enum; the value is restricted to one of the constants named in the enum.
+"altenum" may be one of the values contained in the enum, but it need not be.
+"mask" refers to an enum to be used as a bitmask.
+
+<pad bytes="integer" />
+
+  This element declares some padding in a data structure.  The bytes
+  attribute declares the number of bytes of padding.
+
+<field type="identifier" name="identifier" />
+
+  This element represents a field in a data structure.  The type attribute
+  declares the data type of the field, and the name attribute gives the name
+  of the field.
+
+<list type="identifier" name="identifier">expression</list>
+
+  This element represents an array or list of fields in a data structure.  The
+  type attribute declares the data type of the field, and the name attribute
+  gives the name of the field.  The content is an expression giving the length
+  of the list in terms of other fields in the structure.  See the section
+  "Expressions" for details on the expression representation.
+
+<localfield type="identifier" name="identifier" />
+
+  This element represents a parameter in a request that is not sent over the
+  wire.  The field can be referenced in the length expressions of lists or in
+  an exprfield.  The type attribute declares the data type of the field, and
+  the name attribute gives the name of the field.
+
+<exprfield type="identifier" name="identifier">expression</exprfield>
+
+  This element represents a field in a request that is calculated rather than
+  supplied by the caller.  The type attribute declares the data type of the
+  field, and the name attribute gives the name of the field.  The content is
+  the expression giving the value of the field.  See the section "Expressions"
+  for details on the expression representation.
+
+<valueparam value-mask-type="identifier" value-mask-name="identifier"
+            value-list-name="identifier" />
+
+  This element represents a BITMASK/LISTofVALUE parameter pair: a bitmask
+  defining the set of values included, and a list containing these values.
+  value-mask-type gives the type of the bitmask; this must be CARD16 or
+  CARD32.  value-mask-name gives the field name of the bitmask, and
+  value-list-name gives the field name of the list of values.
+
+
+Expressions
+-----------
+
+  Expressions consist of a tree of <op> elements with leaves consisting of
+  <fieldref> or <value> elements.
+
+<op op="operator">expression expression</op>
+
+  The op element represents an operator, with the op attribute specifying
+  which operator.  The supported operations are +, -, *, /, &amp;, and
+  &lt;&lt;, and their semantics are identical to the corresponding operators
+  in C.  The two operand expressions may be other expression elements.
+
+<fieldref>identifier</fieldref>
+
+  The fieldref element represents a reference to the value of another field in
+  the structure containing this expression.  The identifier is the value of
+  the "name" attribute on the referenced field.
+
+<value>integer</value>
+
+  The value element represents a literal integer value in an expression.  The
+  integer may be expressed in decimal or hexadecimal.
+
+<bit>integer</bit>
+
+  The bit element represents a literal bitmask value in an expression.
+  The integer must be in the range 0..31, expanding to (1<<n) in C.
diff --git a/libxcb/xcb-proto/install-sh b/libxcb/xcb-proto/install-sh
new file mode 100644
index 000000000..a5897de6e
--- /dev/null
+++ b/libxcb/xcb-proto/install-sh
@@ -0,0 +1,519 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-12-25.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libxcb/xcb-proto/missing b/libxcb/xcb-proto/missing
new file mode 100644
index 000000000..1c8ff7049
--- /dev/null
+++ b/libxcb/xcb-proto/missing
@@ -0,0 +1,367 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libxcb/xcb-proto/py-compile b/libxcb/xcb-proto/py-compile
new file mode 100644
index 000000000..d6e900b30
--- /dev/null
+++ b/libxcb/xcb-proto/py-compile
@@ -0,0 +1,146 @@
+#!/bin/sh
+# py-compile - Compile a Python program
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 2000, 2001, 2003, 2004, 2005  Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+if [ -z "$PYTHON" ]; then
+  PYTHON=python
+fi
+
+basedir=
+destdir=
+files=
+while test $# -ne 0; do
+  case "$1" in
+    --basedir)
+      basedir=$2
+      if test -z "$basedir"; then
+        echo "$0: Missing argument to --basedir." 1>&2
+        exit 1
+      fi
+      shift
+      ;;
+    --destdir)
+      destdir=$2
+      if test -z "$destdir"; then
+        echo "$0: Missing argument to --destdir." 1>&2
+        exit 1
+      fi
+      shift
+      ;;
+    -h|--h*)
+      cat <<\EOF
+Usage: py-compile [--help] [--version] [--basedir DIR] [--destdir DIR] FILES..."
+
+Byte compile some python scripts FILES.  Use --destdir to specify any
+leading directory path to the FILES that you don't want to include in the
+byte compiled file.  Specify --basedir for any additional path information you
+do want to be shown in the byte compiled file.
+
+Example:
+  py-compile --destdir /tmp/pkg-root --basedir /usr/share/test test.py test2.py
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+      exit $?
+      ;;
+    -v|--v*)
+      echo "py-compile $scriptversion"
+      exit $?
+      ;;
+    *)
+      files="$files $1"
+      ;;
+  esac
+  shift
+done
+
+if test -z "$files"; then
+    echo "$0: No files given.  Try \`$0 --help' for more information." 1>&2
+    exit 1
+fi
+
+# if basedir was given, then it should be prepended to filenames before
+# byte compilation.
+if [ -z "$basedir" ]; then
+    pathtrans="path = file"
+else
+    pathtrans="path = os.path.join('$basedir', file)"
+fi
+
+# if destdir was given, then it needs to be prepended to the filename to
+# byte compile but not go into the compiled file.
+if [ -z "$destdir" ]; then
+    filetrans="filepath = path"
+else
+    filetrans="filepath = os.path.normpath('$destdir' + os.sep + path)"
+fi
+
+$PYTHON -c "
+import sys, os, string, py_compile
+
+files = '''$files'''
+
+print 'Byte-compiling python modules...'
+for file in string.split(files):
+    $pathtrans
+    $filetrans
+    if not os.path.exists(filepath) or not (len(filepath) >= 3
+                                            and filepath[-3:] == '.py'):
+	continue
+    print file,
+    sys.stdout.flush()
+    py_compile.compile(filepath, filepath + 'c', path)
+print" || exit $?
+
+# this will fail for python < 1.5, but that doesn't matter ...
+$PYTHON -O -c "
+import sys, os, string, py_compile
+
+files = '''$files'''
+print 'Byte-compiling python modules (optimized versions) ...'
+for file in string.split(files):
+    $pathtrans
+    $filetrans
+    if not os.path.exists(filepath) or not (len(filepath) >= 3
+                                            and filepath[-3:] == '.py'):
+	continue
+    print file,
+    sys.stdout.flush()
+    py_compile.compile(filepath, filepath + 'o', path)
+print" 2>/dev/null || :
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libxcb/xcb-proto/src/Makefile.am b/libxcb/xcb-proto/src/Makefile.am
new file mode 100644
index 000000000..3caaed246
--- /dev/null
+++ b/libxcb/xcb-proto/src/Makefile.am
@@ -0,0 +1,32 @@
+xcbinclude_HEADERS = \
+	xcb.xsd \
+	xproto.xml \
+	bigreq.xml \
+	composite.xml \
+	damage.xml \
+	dpms.xml \
+	glx.xml \
+	randr.xml \
+	record.xml \
+	render.xml \
+	res.xml \
+	screensaver.xml \
+	shape.xml \
+	shm.xml \
+	sync.xml \
+	xc_misc.xml \
+	xevie.xml \
+	xf86dri.xml \
+	xfixes.xml \
+	xinerama.xml \
+	xinput.xml \
+	xprint.xml \
+	xselinux.xml \
+	xtest.xml \
+	xv.xml \
+	xvmc.xml
+
+if HAVE_XMLLINT
+check-local:
+	$(XMLLINT) --noout --schema $(srcdir)/xcb.xsd $(srcdir)/*.xml
+endif
diff --git a/libxcb/xcb-proto/src/Makefile.in b/libxcb/xcb-proto/src/Makefile.in
new file mode 100644
index 000000000..95cb05294
--- /dev/null
+++ b/libxcb/xcb-proto/src/Makefile.in
@@ -0,0 +1,396 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(xcbinclude_HEADERS)
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(xcbincludedir)"
+xcbincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(xcbinclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+XMLLINT = @XMLLINT@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = @pkgpythondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xcbincludedir = @xcbincludedir@
+xcbinclude_HEADERS = \
+	xcb.xsd \
+	xproto.xml \
+	bigreq.xml \
+	composite.xml \
+	damage.xml \
+	dpms.xml \
+	glx.xml \
+	randr.xml \
+	record.xml \
+	render.xml \
+	res.xml \
+	screensaver.xml \
+	shape.xml \
+	shm.xml \
+	sync.xml \
+	xc_misc.xml \
+	xevie.xml \
+	xf86dri.xml \
+	xfixes.xml \
+	xinerama.xml \
+	xinput.xml \
+	xprint.xml \
+	xselinux.xml \
+	xtest.xml \
+	xv.xml \
+	xvmc.xml
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  src/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-xcbincludeHEADERS: $(xcbinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(xcbincludedir)" || $(MKDIR_P) "$(DESTDIR)$(xcbincludedir)"
+	@list='$(xcbinclude_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(xcbincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(xcbincludedir)/$$f'"; \
+	  $(xcbincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(xcbincludedir)/$$f"; \
+	done
+
+uninstall-xcbincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(xcbinclude_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(xcbincludedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(xcbincludedir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+@HAVE_XMLLINT_FALSE@check-local:
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(xcbincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-xcbincludeHEADERS
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-xcbincludeHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am check-local clean \
+	clean-generic ctags distclean distclean-generic distclean-tags \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip install-xcbincludeHEADERS installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-xcbincludeHEADERS
+
+
+@HAVE_XMLLINT_TRUE@check-local:
+@HAVE_XMLLINT_TRUE@	$(XMLLINT) --noout --schema $(srcdir)/xcb.xsd $(srcdir)/*.xml
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libxcb/xcb-proto/src/bigreq.xml b/libxcb/xcb-proto/src/bigreq.xml
new file mode 100644
index 000000000..3cca2f77f
--- /dev/null
+++ b/libxcb/xcb-proto/src/bigreq.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="bigreq" extension-xname="BIG-REQUESTS"
+    extension-name="BigRequests" extension-multiword="true"
+    major-version="0" minor-version="0">
+
+  <request name="Enable" opcode="0">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="maximum_request_length" />
+    </reply>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/composite.xml b/libxcb/xcb-proto/src/composite.xml
new file mode 100644
index 000000000..d16b6e746
--- /dev/null
+++ b/libxcb/xcb-proto/src/composite.xml
@@ -0,0 +1,98 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Josh Triplett.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!-- This file describes version 0.3 of COMPOSITE. -->
+<xcb header="composite" extension-xname="Composite" extension-name="Composite"
+    major-version="0" minor-version="3">
+
+  <import>xproto</import>
+  <import>xfixes</import>
+
+  <enum name="Redirect">
+    <item name="Automatic" />
+    <item name="Manual" />
+  </enum>
+
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD32" name="client_major_version" />
+    <field type="CARD32" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="major_version" />
+      <field type="CARD32" name="minor_version" />
+      <pad bytes="16" />
+    </reply>
+  </request>
+
+  <request name="RedirectWindow" opcode="1">
+    <field type="WINDOW" name="window" />
+    <field type="CARD8" name="update" enum="Redirect" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="RedirectSubwindows" opcode="2">
+    <field type="WINDOW" name="window" />
+    <field type="CARD8" name="update" enum="Redirect" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="UnredirectWindow" opcode="3">
+    <field type="WINDOW" name="window" />
+    <field type="CARD8" name="update" enum="Redirect" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="UnredirectSubwindows" opcode="4">
+    <field type="WINDOW" name="window" />
+    <field type="CARD8" name="update" enum="Redirect" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="CreateRegionFromBorderClip" opcode="5">
+    <field type="REGION" name="region" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="NameWindowPixmap" opcode="6">
+    <field type="WINDOW" name="window" />
+    <field type="PIXMAP" name="pixmap" />
+  </request>
+  
+  <!-- new in version 0.3 -->
+  
+  <request name="GetOverlayWindow" opcode="7">
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="WINDOW" name="overlay_win" />
+      <pad bytes="20" />
+    </reply>
+  </request>
+
+  <request name="ReleaseOverlayWindow" opcode="8">
+    <field type="WINDOW" name="window" />
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/damage.xml b/libxcb/xcb-proto/src/damage.xml
new file mode 100644
index 000000000..9c5cde5b6
--- /dev/null
+++ b/libxcb/xcb-proto/src/damage.xml
@@ -0,0 +1,87 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Josh Triplett
+Copyright (C) 2007 Jeremy Kolb
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!-- This file describes version 1.1 of DAMAGE. -->
+<xcb header="damage" extension-xname="DAMAGE" extension-name="Damage"
+    major-version="1" minor-version="1">
+  <import>xproto</import>
+  <import>xfixes</import>
+
+  <xidtype name="DAMAGE" />
+
+  <enum name="ReportLevel">
+    <item name="RawRectangles" />
+    <item name="DeltaRectangles" />
+    <item name="BoundingBox" />
+    <item name="NonEmpty" />
+  </enum>
+
+  <error name="BadDamage" number="0" />
+
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD32" name="client_major_version" />
+    <field type="CARD32" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="major_version" />
+      <field type="CARD32" name="minor_version" />
+      <pad bytes="16" />
+    </reply>
+  </request>
+
+  <request name="Create" opcode="1">
+    <field type="DAMAGE"   name="damage" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD8"    name="level" enum="ReportLevel" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="Destroy" opcode="2">
+    <field type="DAMAGE" name="damage" />
+  </request>
+
+  <request name="Subtract" opcode="3">
+    <field type="DAMAGE" name="damage" />
+    <field type="REGION" name="repair" altenum="Region" />
+    <field type="REGION" name="parts" altenum="Region" />
+  </request>
+
+  <request name="Add" opcode="4">
+    <field type="DRAWABLE" name="drawable" />
+    <field type="REGION" name="region" />
+  </request>
+
+  <event name="Notify" number="0">
+    <field type="CARD8"     name="level" enum="ReportLevel" />
+    <field type="DRAWABLE"  name="drawable" />
+    <field type="DAMAGE"    name="damage" />
+    <field type="TIMESTAMP" name="timestamp" />
+    <field type="RECTANGLE" name="area" />
+    <field type="RECTANGLE" name="geometry" />
+  </event>
+</xcb>
diff --git a/libxcb/xcb-proto/src/dpms.xml b/libxcb/xcb-proto/src/dpms.xml
new file mode 100644
index 000000000..0c2ac2027
--- /dev/null
+++ b/libxcb/xcb-proto/src/dpms.xml
@@ -0,0 +1,87 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="dpms" extension-xname="DPMS" extension-name="DPMS"
+    major-version="0" minor-version="0">
+  <request name="GetVersion" opcode="0">
+    <field type="CARD16" name="client_major_version" />
+    <field type="CARD16" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="server_major_version" />
+      <field type="CARD16" name="server_minor_version" />
+    </reply>
+  </request>
+
+  <request name="Capable" opcode="1">
+    <reply>
+      <pad bytes="1" />
+      <field type="BOOL" name="capable" />
+      <pad bytes="23" />
+    </reply>
+  </request>
+
+  <request name="GetTimeouts" opcode="2">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="standby_timeout" />
+      <field type="CARD16" name="suspend_timeout" />
+      <field type="CARD16" name="off_timeout" />
+      <pad bytes="18" />
+    </reply>
+  </request>
+
+  <request name="SetTimeouts" opcode="3">
+    <field type="CARD16" name="standby_timeout" />
+    <field type="CARD16" name="suspend_timeout" />
+    <field type="CARD16" name="off_timeout" />
+  </request>
+
+  <request name="Enable" opcode="4" />
+
+  <request name="Disable" opcode="5" />
+
+  <enum name="DPMSMode">
+    <item name="On" />
+    <item name="Standby" />
+    <item name="Suspend" />
+    <item name="Off" />
+  </enum>
+
+  <request name="ForceLevel" opcode="6">
+    <field type="CARD16" name="power_level" enum="DPMSMode" />
+  </request>
+
+  <request name="Info" opcode="7">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="power_level" enum="DPMSMode" />
+      <field type="BOOL" name="state" />
+      <pad bytes="21" />
+    </reply>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/glx.xml b/libxcb/xcb-proto/src/glx.xml
new file mode 100644
index 000000000..544b543a1
--- /dev/null
+++ b/libxcb/xcb-proto/src/glx.xml
@@ -0,0 +1,1557 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2005 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<!--
+Note that on X.org servers before 6.9 (and probably others as well) the length
+field in the reply is computed incorrectly for GetFBConfigs and
+VendorPrivateWithReply vendor_code 0x10004 (GetFBConfigsSGIX). For these
+requests the reply structure begins:
+	<pad bytes="1" />
+	<field type="CARD32" name="numVisuals" />
+	<field type="CARD32" name="numProps" />
+The correct value for the length field is
+	numVisuals * numProps * 2
+but on broken servers the "* 2" was missing. A workaround that is correct for
+all implementations is to rewrite the length field on receipt on the client
+side, using the expression above.
+
+The patch that fixed this server bug in X.org CVS is here:
+	http://cvs.freedesktop.org/xorg/xserver/xorg/GL/glx/glxcmds.c?r1=1.6&r2=1.7
+-->
+
+<xcb header="glx" extension-xname="GLX" extension-name="Glx"
+    major-version="1" minor-version="3">
+	<!-- target support: 1.3 -->
+
+	<import>xproto</import>
+
+	<xidtype name="PIXMAP" />
+	<xidtype name="CONTEXT" />
+	<xidtype name="PBUFFER" />
+	<xidtype name="WINDOW" />
+        <xidtype name="FBCONFIG" />
+
+        <xidunion name="DRAWABLE">
+            <type>xproto:WINDOW</type>
+            <type>PBUFFER</type>
+            <type>glx:PIXMAP</type>
+            <type>glx:WINDOW</type>
+        </xidunion>
+
+	<typedef oldname="float" newname="FLOAT32" />
+	<typedef oldname="double" newname="FLOAT64" />
+        <typedef oldname="CARD32" newname="BOOL32" />
+        <typedef oldname="CARD32" newname="CONTEXT_TAG" />
+	    
+	<!-- Errors -->
+	<error name="Generic" number="-1"> <!-- FIXME: fake number -->
+		<field type="CARD32" name="bad_value" />
+		<field type="CARD16" name="minor_opcode" />
+		<field type="CARD8" name="major_opcode" />
+		<pad bytes="21" />
+	</error>
+
+	<errorcopy name="BadContext" number="0" ref="Generic" />
+	<errorcopy name="BadContextState" number="1" ref="Generic" />
+	<errorcopy name="BadDrawable" number="2" ref="Generic" />
+	<errorcopy name="BadPixmap" number="3" ref="Generic" />
+	<errorcopy name="BadContextTag" number="4" ref="Generic" />
+	<errorcopy name="BadCurrentWindow" number="5" ref="Generic" />
+	<errorcopy name="BadRenderRequest" number="6" ref="Generic" />
+	<errorcopy name="BadLargeRequest" number="7" ref="Generic" />
+	<errorcopy name="UnsupportedPrivateRequest" number="8" ref="Generic" />
+	<errorcopy name="BadFBConfig" number="9" ref="Generic" />
+	<errorcopy name="BadPbuffer" number="10" ref="Generic" />
+	<errorcopy name="BadCurrentDrawable" number="11" ref="Generic" />
+	<errorcopy name="BadWindow" number="12" ref="Generic" />
+
+	<!-- Events -->
+	<event name="PbufferClobber" number="0">
+		<pad bytes="1" />
+		<field type="CARD16" name="event_type" />
+		<field type="CARD16" name="draw_type" />
+		<field type="glx:DRAWABLE" name="drawable" />
+		<field type="CARD32" name="b_mask" />
+		<field type="CARD16" name="aux_buffer" />
+		<field type="CARD16" name="x" />
+		<field type="CARD16" name="y" />
+		<field type="CARD16" name="width" />
+		<field type="CARD16" name="height" />
+		<field type="CARD16" name="count" />
+		<pad bytes="4" />
+	</event>
+
+	<!-- enums for PbufferClobber event/draw type -->
+	<enum name="PBCET">
+		<item name="Damaged">
+			<value>32791</value>
+		</item>
+		<item name="Saved">
+			<value>32792</value>
+		</item>
+	</enum>
+
+	<enum name="PBCDT">
+		<item name="Window">
+			<value>32793</value>
+		</item>
+		<item name="Pbuffer">
+			<value>32794</value>
+		</item>
+	</enum>
+
+	<!-- Requests -->
+	<request name="Render" opcode="1" combine-adjacent="true">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<list type="BYTE" name="data" />
+	</request>
+
+	<request name="RenderLarge" opcode="2">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD16" name="request_num" />
+		<field type="CARD16" name="request_total" />
+		<field type="CARD32" name="data_len" />
+		<list type="BYTE" name="data">
+		    <fieldref>data_len</fieldref>
+		</list>
+	</request>
+
+	<request name="CreateContext" opcode="3">
+		<field type="glx:CONTEXT" name="context" />
+		<field type="VISUALID" name="visual" />
+		<field type="CARD32" name="screen" />
+		<field type="glx:CONTEXT" name="share_list" />
+		<field type="BOOL" name="is_direct" />
+		<pad bytes="3" />
+	</request>
+
+	<request name="DestroyContext" opcode="4">
+		<field type="glx:CONTEXT" name="context" />
+	</request>
+
+	<request name="MakeCurrent" opcode="5">
+		<field type="glx:DRAWABLE" name="drawable" />
+		<field type="glx:CONTEXT" name="context" />
+		<field type="CONTEXT_TAG" name="old_context_tag" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CONTEXT_TAG" name="context_tag" />
+			<pad bytes="20" />
+		</reply>
+	</request>
+
+	<request name="IsDirect" opcode="6">
+		<field type="glx:CONTEXT" name="context" />
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL" name="is_direct" />
+			<pad bytes="23" />
+		</reply>
+	</request>
+
+	<request name="QueryVersion" opcode="7">
+		<field type="CARD32" name="major_version" />
+		<field type="CARD32" name="minor_version" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="major_version" />
+			<field type="CARD32" name="minor_version" />
+			<pad bytes="16" />
+		</reply>
+	</request>
+
+	<request name="WaitGL" opcode="8">
+		<field type="CONTEXT_TAG" name="context_tag" />
+	</request>
+
+	<request name="WaitX" opcode="9">
+		<field type="CONTEXT_TAG" name="context_tag" />
+	</request>
+
+	<request name="CopyContext" opcode="10">
+		<field type="glx:CONTEXT" name="src" />
+		<field type="glx:CONTEXT" name="dest" />
+		<field type="CARD32" name="mask" />
+		<field type="CONTEXT_TAG" name="src_context_tag" />
+	</request>
+
+	<!-- Enum for CopyContext: mask -->
+	<enum name="GC">
+		<item name="GL_CURRENT_BIT"><bit>0</bit></item>
+		<item name="GL_POINT_BIT"><bit>1</bit></item>
+		<item name="GL_LINE_BIT"><bit>2</bit></item>
+		<item name="GL_POLYGON_BIT"><bit>3</bit></item>
+		<item name="GL_POLYGON_STIPPLE_BIT"><bit>4</bit></item>
+		<item name="GL_PIXEL_MODE_BIT"><bit>5</bit></item>
+		<item name="GL_LIGHTING_BIT"><bit>6</bit></item>
+		<item name="GL_FOG_BIT"><bit>7</bit></item>
+		<item name="GL_DEPTH_BUFFER_BIT"><bit>8</bit></item>
+		<item name="GL_ACCUM_BUFFER_BIT"><bit>9</bit></item>
+		<item name="GL_STENCIL_BUFFER_BIT"><bit>10</bit></item>
+		<item name="GL_VIEWPORT_BIT"><bit>11</bit></item>
+		<item name="GL_TRANSFORM_BIT"><bit>12</bit></item>
+		<item name="GL_ENABLE_BIT"><bit>13</bit></item>
+		<item name="GL_COLOR_BUFFER_BIT"><bit>14</bit></item>
+		<item name="GL_HINT_BIT"><bit>15</bit></item>
+		<item name="GL_EVAL_BIT"><bit>16</bit></item>
+		<item name="GL_LIST_BIT"><bit>17</bit></item>
+		<item name="GL_TEXTURE_BIT"><bit>18</bit></item>
+		<item name="GL_SCISSOR_BIT"><bit>19</bit></item>
+		<item name="GL_ALL_ATTRIB_BITS"><value>16777215<!--0x000ffffff--></value></item>
+	</enum>
+
+	<request name="SwapBuffers" opcode="11">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="glx:DRAWABLE" name="drawable" />
+	</request>
+
+	<request name="UseXFont" opcode="12">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="FONT" name="font" />
+		<field type="CARD32" name="first" />
+		<field type="CARD32" name="count" />
+		<field type="CARD32" name="list_base" />
+	</request>
+
+	<request name="CreateGLXPixmap" opcode="13">
+		<field type="CARD32" name="screen" />
+		<field type="VISUALID" name="visual" />
+		<field type="xproto:PIXMAP" name="pixmap" />
+		<field type="glx:PIXMAP" name="glx_pixmap" />
+	</request>
+
+        
+	<request name="GetVisualConfigs" opcode="14">
+		<field type="CARD32" name="screen" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="num_visuals" />
+			<field type="CARD32" name="num_properties" />
+                        <pad bytes="16" />
+			<list type="CARD32" name="property_list">
+				<fieldref>length</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="DestroyGLXPixmap" opcode="15">
+		<field type="glx:PIXMAP" name="glx_pixmap" />
+	</request>
+
+	<!--
+	Context tag is not in the proto, should be part of the list of bytes
+	but every VendorPrivate and VendorPrivateWithReply request uses them
+	so it is safe to put them in.  That's how Mesa does it.
+	-->
+	<request name="VendorPrivate" opcode="16">
+		<field type="CARD32" name="vendor_code" />
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<list type="BYTE" name="data" />
+	</request>
+
+	<request name="VendorPrivateWithReply" opcode="17">
+		<field type="CARD32" name="vendor_code" />
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<list type="BYTE" name="data" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="retval" />
+			<list type="BYTE" name="data1">
+				<value>24</value>
+			</list>
+			<list type="BYTE" name="data2">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="QueryExtensionsString" opcode="18">
+		<field type="CARD32" name="screen" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<pad bytes="16" />
+		</reply>
+	</request>
+
+	<request name="QueryServerString" opcode="19">
+		<field type="CARD32" name="screen" />
+		<field type="CARD32" name="name" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="str_len" />
+			<pad bytes="16" />
+			<list type="char" name="string">
+				<fieldref>str_len</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="ClientInfo" opcode="20">
+		<field type="CARD32" name="major_version" />
+		<field type="CARD32" name="minor_version" />
+		<field type="CARD32" name="str_len" />
+		<list type="char" name="string">
+			<fieldref>str_len</fieldref>
+		</list>
+	</request>
+
+	<!-- Start of GLX 1.3 Requests -->
+
+	<request name="GetFBConfigs" opcode="21">
+		<field type="CARD32" name="screen" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="num_FB_configs" />
+			<field type="CARD32" name="num_properties" />
+                        <pad bytes="16" />
+                        <!--
+			<valueparam value-mask-type="CARD32"
+				value-mask-name="value_mask"
+                                value-list-name="value_list" />
+                            -->
+                        <list type="CARD32" name="property_list">
+				<fieldref>length</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="CreatePixmap" opcode="22">
+		<field type="CARD32" name="screen" />
+		<field type="CARD32" name="fbconfig" />
+		<field type="xproto:PIXMAP" name="pixmap" />
+		<field type="glx:PIXMAP" name="glx_pixmap" />
+		<field type="CARD32" name="num_attribs" />  
+		<list type="CARD32" name="attribs">
+			<op op="*">
+				<fieldref>num_attribs</fieldref>
+				<value>2</value>
+			</op>
+		</list>
+	</request>
+
+	<request name="DestroyPixmap" opcode="23">
+		<field type="glx:PIXMAP" name="glx_pixmap" />
+	</request>
+
+	<request name="CreateNewContext" opcode="24">
+		<field type="glx:CONTEXT" name="context" />
+		<field type="CARD32" name="fbconfig" />
+		<field type="CARD32" name="screen" />
+		<field type="CARD32" name="render_type" />
+		<field type="CARD32" name="share_list" />
+		<field type="BOOL" name="is_direct" />
+		<field type="CARD8" name="reserved1" />
+		<field type="CARD16" name="reserved2" />
+	</request>
+
+	<request name="QueryContext" opcode="25">
+		<field type="glx:CONTEXT" name="context" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="num_attribs"/>
+			<pad bytes="20" />
+			<list type="CARD32" name="attribs">
+				<op op="*">
+					<fieldref>num_attribs</fieldref>
+					<value>2</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="MakeContextCurrent" opcode="26">
+		<field type="CONTEXT_TAG" name="old_context_tag" />
+		<field type="glx:DRAWABLE" name="drawable" />
+		<field type="glx:DRAWABLE" name="read_drawable" />
+		<field type="glx:CONTEXT" name="context" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CONTEXT_TAG" name="context_tag" />
+			<pad bytes="20" />
+		</reply>
+	</request>
+
+	<request name="CreatePbuffer" opcode="27">
+		<field type="CARD32" name="screen" />
+		<field type="FBCONFIG" name="fbconfig" />
+		<field type="PBUFFER" name="pbuffer" />
+		<field type="CARD32" name="num_attribs" />
+		<list type="CARD32" name="attribs">
+			<op op="*">
+				<fieldref>num_attribs</fieldref>
+				<value>2</value>
+			</op>
+		</list>
+	</request>
+
+	<request name="DestroyPbuffer" opcode="28">
+		<field type="PBUFFER" name="pbuffer" />
+	</request>
+
+	<request name="GetDrawableAttributes" opcode="29">
+		<field type="glx:DRAWABLE" name="drawable" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="num_attribs" />
+			<pad bytes="20" />
+			<list type="CARD32" name="attribs">
+				<op op="*">
+					<fieldref>num_attribs</fieldref>
+					<value>2</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="ChangeDrawableAttributes" opcode="30">
+		<field type="glx:DRAWABLE" name="drawable" />
+		<field type="CARD32" name="num_attribs" />
+		<list type="CARD32" name="attribs">
+			<op op="*">
+				<fieldref>num_attribs</fieldref>
+				<value>2</value>
+			</op>
+		</list>
+	</request>
+
+	<request name="CreateWindow" opcode="31">
+		<field type="CARD32" name="screen" />
+		<field type="FBCONFIG" name="fbconfig" />
+		<field type="xproto:WINDOW" name="window" />
+		<field type="glx:WINDOW" name="glx_window" />
+		<field type="CARD32" name="num_attribs" />
+		<list type="CARD32" name="attribs">
+			<op op="*">
+				<fieldref>num_attribs</fieldref>
+				<value>2</value>
+			</op>
+		</list>
+	</request>
+
+	<request name="DeleteWindow" opcode="32">
+		<field type="glx:WINDOW" name="glxwindow" />
+	</request>
+
+	<!-- Requests for GL Non-rendering Commands (single ops) -->
+
+	<request name="NewList" opcode="101">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="list" />
+		<field type="CARD32" name="mode" />
+	</request>
+
+	<request name="EndList" opcode="102">
+		<field type="CONTEXT_TAG" name="context_tag" />
+	</request>
+
+	<request name="DeleteLists" opcode="103">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="list" />
+		<field type="INT32" name="range" />
+	</request>
+
+	<request name="GenLists" opcode="104">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="range" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="ret_val" />
+		</reply>
+	</request>
+
+	<request name="FeedbackBuffer" opcode="105">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="size" />
+		<field type="INT32" name="type" />
+	</request>
+
+	<request name="SelectBuffer" opcode="106">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="size" />
+		<!-- the reply is actually returned in the data
+		of the next RenderMode request -->
+	</request>
+
+
+	<request name="RenderMode" opcode="107">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="mode" />
+		<!--
+		This reply is only if RM was previously feedback/selection.
+		If it was in feedback mode then data is FLOAT32.
+		If previously in render mode there is no reply.
+		-->
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="ret_val" />
+			<field type="CARD32" name="n" />
+			<field type="CARD32" name="new_mode" />
+			<pad bytes="12" />
+			<list type="CARD32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<enum name="RM">
+		<item name="GL_RENDER"><value>7168</value></item>
+		<item name="GL_FEEDBACK"><value>7169</value></item>
+		<item name="GL_SELECT"><value>7170</value></item>
+	</enum>
+
+	<request name="Finish" opcode="108">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<reply>
+			<pad bytes="1" />
+		</reply>
+	</request>
+
+	<request name="PixelStoref" opcode="109">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="pname" />
+		<field type="FLOAT32" name="datum" />
+	</request>
+
+	<request name="PixelStorei" opcode="110">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="pname" />
+		<field type="INT32" name="datum" />
+	</request>
+
+	<request name="ReadPixels" opcode="111">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="x" />
+		<field type="INT32" name="y" />
+		<field type="INT32" name="width" />
+		<field type="INT32" name="height" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<field type="BOOL" name="lsb_first" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+		
+	<!-- FIXME:
+	All the Get* functions can return different stuff for replies.
+	Hopefully xcb will support multiple reply structures at some point
+	but for now... grrrr
+	Starts on page 58/180
+	-->
+	<request name="GetBooleanv" opcode="112">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="BOOL" name="datum" />
+			<pad bytes="15" />
+			<list type="BOOL" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetClipPlane" opcode="113">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="plane" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="FLOAT64" name="data">
+				<op op="/">
+					<fieldref>length</fieldref>
+					<value>2</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetDoublev" opcode="114">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT64" name="datum" />
+			<pad bytes="8" />
+			<list type="FLOAT64" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetError" opcode="115">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<reply>
+			<pad bytes="1" />
+			<field type="INT32" name="error" />
+		</reply>
+	</request>
+
+	<request name="GetFloatv" opcode="116">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetIntegerv" opcode="117">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetLightfv" opcode="118">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="light" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetLightiv" opcode="119">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="light" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMapdv" opcode="120">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="query" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT64" name="datum" />
+			<pad bytes="8" />
+			<list type="FLOAT64" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMapfv" opcode="121">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="query" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMapiv" opcode="122">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="query" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMaterialfv" opcode="123">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="face" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMaterialiv" opcode="124">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="face" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetPixelMapfv" opcode="125">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="map" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetPixelMapuiv" opcode="126">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="map" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="CARD32" name="datum" />
+			<pad bytes="12" />
+			<list type="CARD32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetPixelMapusv" opcode="127">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="map" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="CARD16" name="datum" />
+			<pad bytes="16" />
+			<list type="CARD16" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetPolygonStipple" opcode="128">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="BOOL" name="lsb_first" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+
+	<request name="GetString" opcode="129">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="name" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<pad bytes="16" />
+			<list type="char" name="string">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexEnvfv" opcode="130">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexEnviv" opcode="131">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexGendv" opcode="132">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="coord" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT64" name="datum" />
+			<pad bytes="8" />
+			<list type="FLOAT64" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexGenfv" opcode="133">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="coord" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexGeniv" opcode="134">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="coord" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexImage" opcode="135">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="INT32" name="level" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="width" />
+			<field type="INT32" name="height" />
+			<field type="INT32" name="depth" />
+			<pad bytes="4" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+	    
+
+	<request name="GetTexParameterfv" opcode="136">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexParameteriv" opcode="137">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexLevelParameterfv" opcode="138">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="INT32" name="level" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetTexLevelParameteriv" opcode="139">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="INT32" name="level" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="IsList" opcode="141" >
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="list" />
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL32" name="ret_val" />
+		</reply>
+	</request>
+
+	<request name="Flush" opcode="142">
+		<field type="CONTEXT_TAG" name="context_tag" />
+	</request>
+
+	<request name="AreTexturesResident" opcode="143">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="n" />
+		<list type="CARD32" name="textures">
+		    <fieldref>n</fieldref>
+		</list>
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL32" name="ret_val" />
+			<pad bytes="20" />
+			<list type="BOOL" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="DeleteTextures" opcode="144">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="n" />
+		<list type="CARD32" name="textures">
+			<fieldref>n</fieldref>
+		</list>
+	</request>
+
+	<request name="GenTextures" opcode="145">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="n" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="CARD32" name="data">
+				<fieldref>length</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="IsTexture" opcode="146">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="texture" />
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL32" name="ret_val" />
+		</reply>
+	</request>
+
+	<request name="GetColorTable" opcode="147">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="width" />
+			<pad bytes="12" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+	
+	<request name="GetColorTableParameterfv" opcode="148">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetColorTableParameteriv" opcode="149">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetConvolutionFilter" opcode="150">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="width" />
+			<field type="INT32" name="height" />
+			<pad bytes="8" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+
+	<request name="GetConvolutionParameterfv" opcode="151">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetConvolutionParameteriv" opcode="152">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetSeparableFilter" opcode="153">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="row_w" />
+			<field type="INT32" name="col_h" />
+			<pad bytes="8" />
+			<list type="BYTE" name="rows_and_cols">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetHistogram" opcode="154">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<field type="BOOL" name="reset" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="width" />
+			<pad bytes="12" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+
+	<request name="GetHistogramParameterfv" opcode="155">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetHistogramParameteriv" opcode="156">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMinmax" opcode="157">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="format" />
+		<field type="CARD32" name="type" />
+		<field type="BOOL" name="swap_bytes" />
+		<field type="BOOL" name="reset" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMinmaxParameterfv" opcode="158">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="FLOAT32" name="datum" />
+			<pad bytes="12" />
+			<list type="FLOAT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetMinmaxParameteriv" opcode="159">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<!--
+	GLX Extensions
+	
+	* XXX: So far only define non-rendering commands.
+	* Only those extensions that affect the GLX wire protocol are listed.
+	-->
+
+	<!--
+	GL_ARB_texture_compression
+	http://oss.sgi.com/projects/ogl-sample/registry/ARB/texture_compression.txt
+	-->
+	<request name="GetCompressedTexImageARB" opcode="160">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="INT32" name="level" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="8" />
+			<field type="INT32" name="size" />
+			<pad bytes="12" />
+			<list type="BYTE" name="data">
+				<op op="*">
+					<fieldref>length</fieldref>
+					<value>4</value>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	
+	<!--
+	GL_ARB_occlusion_query
+	http://oss.sgi.com/projects/ogl-sample/registry/ARB/occlusion_query.txt
+	-->
+
+	<request name="DeleteQueriesARB" opcode="161">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="n" />
+		<list type="CARD32" name="ids">
+			<fieldref>n</fieldref>
+		</list>
+	</request>
+
+	<request name="GenQueriesARB" opcode="162">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="INT32" name="n" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="24" />
+			<list type="CARD32" name="data">
+				<fieldref>length</fieldref>
+			</list>
+		</reply>
+	</request>
+	
+	<request name="IsQueryARB" opcode="163">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="id" />
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL32" name="ret_val" />
+		</reply>
+	</request>
+	
+	<request name="GetQueryivARB" opcode="164">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="target" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+	
+	<request name="GetQueryObjectivARB" opcode="165">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="id" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="INT32" name="datum" />
+			<pad bytes="12" />
+			<list type="INT32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+	
+	<request name="GetQueryObjectuivARB" opcode="166">
+		<field type="CONTEXT_TAG" name="context_tag" />
+		<field type="CARD32" name="id" />
+		<field type="CARD32" name="pname" />
+		<reply>
+			<pad bytes="1" />
+			<pad bytes="4" />
+			<field type="CARD32" name="n" />
+			<field type="CARD32" name="datum" />
+			<pad bytes="12" />
+			<list type="CARD32" name="data">
+				<fieldref>n</fieldref>
+			</list>
+		</reply>
+	</request>
+	
+	<!--
+	GL_ARB_vertex_program
+	http://oss.sgi.com/projects/ogl-sample/registry/ARB/vertex_program.txt
+	XXX: Need to write up vops
+	--> 
+
+	<!--
+	GL_ARB_fragment_program
+	http://oss.sgi.com/projects/ogl-sample/registry/ARB/fragment_program.txt
+	XXX: Need to write up vops
+	-->
+	
+	<!--
+	GL_SGIS_texture_filter4
+	http://oss.sgi.com/projects/ogl-sample/registry/SGIS/texture_filter4.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_EXT_histogram
+	http://oss.sgi.com/projects/ogl-sample/registry/EXT/histogram.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_EXT_convolution
+	http://oss.sgi.com/projects/ogl-sample/registry/EXT/convolution.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGI_color_table
+	http://oss.sgi.com/projects/ogl-sample/registry/SGI/color_table.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_EXT_texture_object
+	http://oss.sgi.com/projects/ogl-sample/registry/EXT/texture_object.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGIS_detail_texture
+	http://oss.sgi.com/projects/ogl-sample/registry/SGIS/detail_texture.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGIS_sharpen_texture
+	http://oss.sgi.com/projects/ogl-sample/registry/SGIS/sharpen_texture.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGI_make_current_read
+	http://oss.sgi.com/projects/ogl-sample/registry/SGI/make_current_read.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_EXT_import_context
+	http://oss.sgi.com/projects/ogl-sample/registry/EXT/import_context.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGIX_fbconfig
+	http://oss.sgi.com/projects/ogl-sample/registry/SGIX/fbconfig.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_SGIX_pbuffer
+	http://oss.sgi.com/projects/ogl-sample/registry/SGIX/pbuffer.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_EXT_pixel_transform
+	http://oss.sgi.com/projects/ogl-sample/registry/EXT/pixel_transform.txt
+	XXX: Need to write up vops
+	-->
+	
+	<!--
+	GL_NV_register_combiners
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/register_combiners.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_fence
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/fence.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_register_combiners2
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/register_combiners2.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_vertex_program
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/vertex_program.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_vertex_program
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/vertex_program.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_occlusion_query
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/occlusion_query.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_NV_fragment_program
+	http://oss.sgi.com/projects/ogl-sample/registry/NV/fragment_program.txt
+	XXX: Need to write up vops
+	-->
+
+	<!--
+	GL_OES_single_precision
+	http://oss.sgi.com/projects/ogl-sample/registry/OES/single_precision.txt
+	XXX: Need to write up vops
+	-->
+	
+</xcb>
diff --git a/libxcb/xcb-proto/src/randr.xml b/libxcb/xcb-proto/src/randr.xml
new file mode 100644
index 000000000..4f0716f7c
--- /dev/null
+++ b/libxcb/xcb-proto/src/randr.xml
@@ -0,0 +1,671 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Jeremy Kolb, Ian Osgood
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="randr" extension-xname="RANDR" extension-name="RandR"
+    major-version="1" minor-version="3">
+
+	<import>xproto</import>
+	<import>render</import>
+
+	<!-- XIDs -->
+	<xidtype name="MODE" />
+	<xidtype name="CRTC" />
+	<xidtype name="OUTPUT" />
+	
+	<!-- Errors -->
+
+	<error name="BadOutput" number="0" />
+	<error name="BadCrtc"   number="1" />
+	<error name="BadMode"   number="2" />
+
+	<!-- Requests -->
+
+	<enum name="Rotation">
+		<item name="Rotate_0">  <bit>0</bit></item>
+		<item name="Rotate_90"> <bit>1</bit></item>
+		<item name="Rotate_180"><bit>2</bit></item>
+		<item name="Rotate_270"><bit>3</bit></item>
+		<item name="Reflect_X"> <bit>4</bit></item>
+		<item name="Reflect_Y"> <bit>5</bit></item>
+	</enum>
+
+	<struct name="ScreenSize">
+		<field type="CARD16" name="width" />   <!-- pixels -->
+		<field type="CARD16" name="height" />
+		<field type="CARD16" name="mwidth" />  <!-- millimeters -->
+		<field type="CARD16" name="mheight" />
+	</struct>
+	
+	<struct name="RefreshRates">
+		<field type="CARD16" name="nRates" />
+		<list type="CARD16" name="rates">
+			<fieldref>nRates</fieldref>
+		</list>
+	</struct>
+	
+	<request name="QueryVersion" opcode="0">
+		<field type="CARD32" name="major_version" />
+		<field type="CARD32" name="minor_version" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD32" name="major_version" />
+			<field type="CARD32" name="minor_version" />
+			<pad bytes="16" />
+		</reply>
+	</request>
+	
+	<!-- Skip obsolete opcode 1 so old clients fail immediately -->
+
+	<enum name="SetConfig">
+		<item name="Success"><value>0</value></item>
+		<item name="InvalidConfigTime"><value>1</value></item>
+		<item name="InvalidTime"><value>2</value></item>
+		<item name="Failed"><value>3</value></item>
+	</enum>
+
+	<!-- This is for the 1.1 version request.  I don't believe we need to specify a 1.0 request
+	as few things used randr 1.0.  The only difference is the removal of refresh and padding I think.
+	BEWARE: the docs lie!
+	-->
+	<request name="SetScreenConfig" opcode="2">
+		<field type="WINDOW" name="window" />
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<field type="CARD16" name="sizeID" />
+		<field type="CARD16" name="rotation" mask="Rotation" />
+		<field type="CARD16" name="rate" />
+		<pad bytes="2" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="new_timestamp" />
+			<field type="TIMESTAMP" name="config_timestamp" />
+			<field type="WINDOW" name="root" />
+			<field type="CARD16" name="subpixel_order" enum="SubPixel" />
+			<pad bytes="10" />
+		</reply>
+	</request>
+	
+	<!-- opcode 3 is obsolete -->
+
+	<enum name="NotifyMask" >
+		<item name="ScreenChange">  <bit>0</bit></item>
+		<!-- new in 1.2 -->
+		<item name="CrtcChange">    <bit>1</bit></item>
+		<item name="OutputChange">  <bit>2</bit></item>
+		<item name="OutputProperty"><bit>3</bit></item>
+	</enum>
+
+	<request name="SelectInput" opcode="4">	
+		<field type="WINDOW" name="window" />
+		<field type="CARD16" name="enable" mask="NotifyMask" />
+		<pad bytes="2" />
+	</request>
+
+	<!--
+	I think this is correct.  It works. though I believe nInfo is a bit high...
+	-->
+	<request name="GetScreenInfo" opcode="5">
+		<field type="WINDOW" name="window" />
+		<reply>
+			<field type="CARD8" name="rotations" mask="Rotation" />
+			<field type="WINDOW" name="root" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="TIMESTAMP" name="config_timestamp" />
+			<field type="CARD16" name="nSizes" />
+			<field type="CARD16" name="sizeID" />
+			<field type="CARD16" name="rotation" mask="Rotation" />
+			<field type="CARD16" name="rate" />
+			<field type="CARD16" name="nInfo" />
+			<pad bytes="2" />
+			<list type="ScreenSize" name="sizes">
+			    <fieldref>nSizes</fieldref>
+			</list>
+			<list type="RefreshRates" name="rates">
+				<op op="-">
+					<fieldref>nInfo</fieldref>
+					<fieldref>nSizes</fieldref>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<!-- new in version 1.2 -->
+
+	<request name="GetScreenSizeRange" opcode="6">
+		<field type="WINDOW" name="window" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD16" name="min_width" />
+			<field type="CARD16" name="min_height" />
+			<field type="CARD16" name="max_width" />
+			<field type="CARD16" name="max_height" />
+			<pad bytes="16" />
+		</reply>
+	</request>
+
+	<request name="SetScreenSize" opcode="7">
+		<field type="WINDOW" name="window" />
+		<field type="CARD16" name="width" />    <!-- pixels -->
+		<field type="CARD16" name="height" />
+		<field type="CARD32" name="mm_width" />  <!-- millimeters -->
+		<field type="CARD32" name="mm_height" />
+	</request>
+
+	<!-- for GetScreenResources.ModeInfo.ModeFlag -->
+	<enum name="ModeFlag">
+		<item name="HsyncPositive"> <bit>0</bit></item>
+		<item name="HsyncNegative"> <bit>1</bit></item>
+		<item name="VsyncPositive"> <bit>2</bit></item>
+		<item name="VsyncNegative"> <bit>3</bit></item>
+		<item name="Interlace">     <bit>4</bit></item>
+		<item name="DoubleScan">    <bit>5</bit></item>
+		<item name="Csync">         <bit>6</bit></item>
+		<item name="CsyncPositive"> <bit>7</bit></item>
+		<item name="CsyncNegative"> <bit>8</bit></item>
+		<item name="HskewPresent">  <bit>9</bit></item>
+		<item name="Bcast">         <bit>10</bit></item>
+		<item name="PixelMultiplex"><bit>11</bit></item>
+		<item name="DoubleClock">   <bit>12</bit></item>
+		<item name="HalveClock">    <bit>13</bit></item>
+	</enum>
+
+	<struct name="ModeInfo">
+		<field type="CARD32" name="id" />
+		<field type="CARD16" name="width" />
+		<field type="CARD16" name="height" />
+		<field type="CARD32" name="dot_clock" />
+		<field type="CARD16" name="hsync_start" />
+		<field type="CARD16" name="hsync_end" />
+		<field type="CARD16" name="htotal" />
+		<field type="CARD16" name="hskew" />
+		<field type="CARD16" name="vsync_start" />
+		<field type="CARD16" name="vsync_end" />
+		<field type="CARD16" name="vtotal" />
+		<field type="CARD16" name="name_len" />
+		<field type="CARD32" name="mode_flags" mask="ModeFlag" />
+		<!-- the mode name itself -->
+	</struct>
+
+	<request name="GetScreenResources" opcode="8">
+		<field type="WINDOW" name="window" />
+		<reply>
+			<pad bytes="1" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="TIMESTAMP" name="config_timestamp" />
+			<field type="CARD16" name="num_crtcs" />
+			<field type="CARD16" name="num_outputs" />
+			<field type="CARD16" name="num_modes" />
+			<field type="CARD16" name="names_len" />
+			<pad bytes="8" />
+			<list type="CRTC" name="crtcs">
+			    <fieldref>num_crtcs</fieldref>
+			</list>
+			<list type="OUTPUT" name="outputs">
+			    <fieldref>num_outputs</fieldref>
+			</list>
+			<list type="ModeInfo" name="modes">
+			    <fieldref>num_modes</fieldref>
+			</list>
+			<!-- FIXME: this is *not* null separated!
+			     One must use ModeInfo.name_len from each previous
+			     ModeInfo to infer the position of the name. -->
+			<list type="BYTE" name="names">
+			    <fieldref>names_len</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<!-- for GetOutputInfo.connection -->
+	<enum name="Connection">
+		<item name="Connected" />
+		<item name="Disconnected" />
+		<item name="Unknown" />
+	</enum>
+
+	<request name="GetOutputInfo" opcode="9">
+		<field type="OUTPUT" name="output" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="CRTC" name="crtc" />
+			<field type="CARD32" name="mm_width" />  <!-- millimeters -->
+			<field type="CARD32" name="mm_height" />
+			<field type="CARD8" name="connection" enum="Connection" />
+			<field type="CARD8" name="subpixel_order" enum="SubPixel" />
+			<field type="CARD16" name="num_crtcs" />
+			<field type="CARD16" name="num_modes" />
+			<field type="CARD16" name="num_preferred" />
+			<field type="CARD16" name="num_clones" />
+			<field type="CARD16" name="name_len" />
+			<list type="CRTC" name="crtcs">
+			    <fieldref>num_crtcs</fieldref>
+			</list>
+			<list type="MODE" name="modes">
+			    <fieldref>num_modes</fieldref>
+			</list>
+			<list type="OUTPUT" name="clones">
+			    <fieldref>num_clones</fieldref>
+			</list>
+			<list type="BYTE" name="name">
+			    <fieldref>name_len</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="ListOutputProperties" opcode="10">
+		<field type="OUTPUT" name="output" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD16" name="num_atoms" />
+			<pad bytes="22" />
+			<list type="ATOM" name="atoms">
+				<fieldref>num_atoms</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="QueryOutputProperty" opcode="11">
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="property" />
+		<reply>
+			<pad bytes="1" />
+			<field type="BOOL" name="pending" />
+			<field type="BOOL" name="range" />
+			<field type="BOOL" name="immutable" />
+			<pad bytes="21" />
+			<list type="INT32" name="validValues">
+				<fieldref>length</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="ConfigureOutputProperty" opcode="12">
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="property" />
+		<field type="BOOL" name="pending" />
+		<field type="BOOL" name="range" />
+		<pad bytes="2" />
+		<list type="INT32" name="values" />
+	</request>
+
+	<request name="ChangeOutputProperty" opcode="13">
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="property" />
+		<field type="ATOM" name="type" />
+		<field type="CARD8" name="format" />
+		<field type="CARD8" name="mode" enum="PropMode" />
+		<pad bytes="2" />
+		<field type="CARD32" name="num_units" />
+		<list type="void" name="data">
+		    <op op="/">
+			<op op="*">
+			    <fieldref>num_units</fieldref>
+			    <fieldref>format</fieldref>
+			</op>
+			<value>8</value>
+		    </op>
+		</list>
+	</request>
+
+	<request name="DeleteOutputProperty" opcode="14">
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="property" />
+	</request>
+
+	<!-- NOTE: num_items depends on format (8/16/32) -->
+	<request name="GetOutputProperty" opcode="15">
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="property" />
+		<field type="ATOM" name="type" altenum="GetPropertyType" />
+		<field type="CARD32" name="long_offset" />
+		<field type="CARD32" name="long_length" />
+		<field type="BOOL" name="delete" />
+		<field type="BOOL" name="pending" />
+		<pad bytes="2" />
+		<reply>
+			<field type="CARD8" name="format" />
+			<field type="ATOM" name="type" altenum="Atom" />
+			<field type="CARD32" name="bytes_after" />
+			<field type="CARD32" name="num_items" />
+			<pad bytes="12" />
+			<list type="BYTE" name="data">
+				<!-- n * format / 8 -->
+				<op op="*">
+					<fieldref>num_items</fieldref>
+					<op op="/">
+						<fieldref>format</fieldref>
+						<value>8</value>
+					</op>
+				</op>
+			</list>
+		</reply>
+	</request>
+
+	<request name="CreateMode" opcode="16">
+		<field type="WINDOW" name="window" />
+		<field type="ModeInfo" name="mode_info" />
+		<list type="char" name="name" />
+		<reply>
+			<pad bytes="1" />
+			<field type="MODE" name="mode" />
+			<pad bytes="20" />
+		</reply>
+	</request>
+
+	<request name="DestroyMode" opcode="17">
+		<field type="MODE" name="mode" />
+	</request>
+
+	<request name="AddOutputMode" opcode="18">
+		<field type="OUTPUT" name="output" />
+		<field type="MODE" name="mode" />
+	</request>
+
+	<request name="DeleteOutputMode" opcode="19">
+		<field type="OUTPUT" name="output" />
+		<field type="MODE" name="mode" />
+	</request>
+
+	<request name="GetCrtcInfo" opcode="20">
+		<field type="CRTC" name="crtc" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="INT16" name="x" />
+			<field type="INT16" name="y" />
+			<field type="CARD16" name="width" />
+			<field type="CARD16" name="height" />
+			<field type="MODE" name="mode" />
+			<field type="CARD16" name="rotation" mask="Rotation" />
+			<field type="CARD16" name="rotations" mask="Rotation" />
+			<field type="CARD16" name="num_outputs" />
+			<field type="CARD16" name="num_possible_outputs" />
+			<list type="OUTPUT" name="outputs">
+				<fieldref>num_outputs</fieldref>
+			</list>
+			<list type="OUTPUT" name="possible">
+				<fieldref>num_possible_outputs</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="SetCrtcConfig" opcode="21">
+		<field type="CRTC" name="crtc" />
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<field type="INT16" name="x" />
+		<field type="INT16" name="y" />
+		<field type="MODE" name="mode" />
+		<field type="CARD16" name="rotation" mask="Rotation" />
+		<pad bytes="2" />
+		<list type="OUTPUT" name="outputs" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<pad bytes="20" />
+		</reply>
+	</request>
+
+	<request name="GetCrtcGammaSize" opcode="22">
+		<field type="CRTC" name="crtc" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD16" name="size" />
+			<pad bytes="22" />
+		</reply>
+	</request>
+
+	<request name="GetCrtcGamma" opcode="23">
+		<field type="CRTC" name="crtc" />
+		<reply>
+			<pad bytes="1" />
+			<field type="CARD16" name="size" />
+			<pad bytes="22" />
+			<list type="CARD16" name="red">
+				<fieldref>size</fieldref>
+			</list>
+			<list type="CARD16" name="green">
+				<fieldref>size</fieldref>
+			</list>
+			<list type="CARD16" name="blue">
+				<fieldref>size</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="SetCrtcGamma" opcode="24">
+		<field type="CRTC" name="crtc" />
+		<field type="CARD16" name="size" />
+		<pad bytes="2"/>
+		<list type="CARD16" name="red">
+			<fieldref>size</fieldref>
+		</list>
+		<list type="CARD16" name="green">
+			<fieldref>size</fieldref>
+		</list>
+		<list type="CARD16" name="blue">
+			<fieldref>size</fieldref>
+		</list>
+	</request>
+
+	<!-- new in 1.3 -->
+
+	<request name="GetScreenResourcesCurrent" opcode="25">
+		<field type="WINDOW" name="window" />
+		<reply>
+			<pad bytes="1" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="TIMESTAMP" name="config_timestamp" />
+			<field type="CARD16" name="num_crtcs" />
+			<field type="CARD16" name="num_outputs" />
+			<field type="CARD16" name="num_modes" />
+			<field type="CARD16" name="names_len" />
+			<pad bytes="8" />
+			<list type="CRTC" name="crtcs">
+			    <fieldref>num_crtcs</fieldref>
+			</list>
+			<list type="OUTPUT" name="outputs">
+			    <fieldref>num_outputs</fieldref>
+			</list>
+			<list type="ModeInfo" name="modes">
+			    <fieldref>num_modes</fieldref>
+			</list>
+			<!-- FIXME: this is *not* null separated!
+			     One must use ModeInfo.name_len from each previous
+			     ModeInfo to infer the position of the name. -->
+			<list type="BYTE" name="names">
+			    <fieldref>names_len</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="SetCrtcTransform" opcode="26">
+		<field type="CRTC" name="crtc" />
+		<field type="TRANSFORM" name="transform" />
+		<field type="CARD16" name="filter_len" />
+		<pad bytes="2" />
+		<list type="char" name="filter_name">
+			<fieldref>filter_len</fieldref>
+		</list>
+		<list type="FIXED" name="filter_params" />
+	</request>
+
+	<request name="GetCrtcTransform" opcode="27">
+		<field type="CRTC" name="crtc" />
+		<reply>
+			<pad bytes="1" />
+			<field type="TRANSFORM" name="pending_transform" />
+			<field type="BOOL" name="has_transforms" />
+			<pad bytes="3" />
+			<field type="TRANSFORM" name="current_transform" />
+			<pad bytes="4" />
+			<field type="CARD16" name="pending_len" />
+			<field type="CARD16" name="pending_nparams" />
+			<field type="CARD16" name="current_len" />
+			<field type="CARD16" name="current_nparams" />
+			<list type="char" name="pending_filter_name" >
+				<fieldref>pending_len</fieldref>
+			</list>
+			<list type="FIXED" name="pending_params" >
+				<fieldref>pending_nparams</fieldref>
+			</list>
+			<list type="char" name="current_filter_name" >
+				<fieldref>current_len</fieldref>
+			</list>
+			<list type="FIXED" name="current_params" >
+				<fieldref>current_nparams</fieldref>
+			</list>
+		</reply>
+	</request>
+
+	<request name="GetPanning" opcode="28">
+		<field type="CRTC" name="crtc" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="timestamp" />
+			<field type="CARD16" name="left" />
+			<field type="CARD16" name="top" />
+			<field type="CARD16" name="width" />
+			<field type="CARD16" name="height" />
+			<field type="CARD16" name="track_left" />
+			<field type="CARD16" name="track_top" />
+			<field type="CARD16" name="track_width" />
+			<field type="CARD16" name="track_height" />
+			<field type="INT16" name="border_left" />
+			<field type="INT16" name="border_top" />
+			<field type="INT16" name="border_right" />
+			<field type="INT16" name="border_bottom" />
+		</reply>
+	</request>
+
+	<request name="SetPanning" opcode="29">
+		<field type="CRTC" name="crtc" />
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="CARD16" name="left" />
+		<field type="CARD16" name="top" />
+		<field type="CARD16" name="width" />
+		<field type="CARD16" name="height" />
+		<field type="CARD16" name="track_left" />
+		<field type="CARD16" name="track_top" />
+		<field type="CARD16" name="track_width" />
+		<field type="CARD16" name="track_height" />
+		<field type="INT16" name="border_left" />
+		<field type="INT16" name="border_top" />
+		<field type="INT16" name="border_right" />
+		<field type="INT16" name="border_bottom" />
+		<reply>
+			<field type="CARD8" name="status" enum="SetConfig" />
+			<field type="TIMESTAMP" name="timestamp" />
+		</reply>
+	</request>
+
+	<request name="SetOutputPrimary" opcode="30">
+		<field type="WINDOW" name="window" />
+		<field type="OUTPUT" name="output" />
+	</request>
+
+	<request name="GetOutputPrimary" opcode="31">
+		<field type="WINDOW" name="window" />
+		<reply>
+			<pad bytes="1" />
+			<field type="OUTPUT" name="output" />
+		</reply>
+	</request>
+
+	<!-- Events -->
+
+	<event name="ScreenChangeNotify" number="0">
+		<field type="CARD8" name="rotation" mask="Rotation" />
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<field type="WINDOW" name="root" />
+		<field type="WINDOW" name="request_window" />
+		<field type="CARD16" name="sizeID" />
+		<field type="CARD16" name="subpixel_order" enum="SubPixel" />
+		<field type="CARD16" name="width" />
+		<field type="CARD16" name="height" />
+		<field type="CARD16" name="mwidth" />
+		<field type="CARD16" name="mheight" />
+	</event>
+
+	<!-- New in version 1.2 -->
+
+	<!-- subcode -->
+	<enum name="Notify" >
+		<item name="CrtcChange">    <value>0</value></item>
+		<item name="OutputChange">  <value>1</value></item>
+		<item name="OutputProperty"><value>2</value></item>
+	</enum>
+
+	<struct name="CrtcChange">
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="WINDOW" name="window" />
+		<field type="CRTC" name="crtc" />
+		<field type="MODE" name="mode" />
+		<field type="CARD16" name="rotation" mask="Rotation" />
+		<pad bytes="2" />
+		<field type="INT16" name="x" />
+		<field type="INT16" name="y" />
+		<field type="CARD16" name="width" />
+		<field type="CARD16" name="height" />
+	</struct>
+
+	<struct name="OutputChange">
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="TIMESTAMP" name="config_timestamp" />
+		<field type="WINDOW" name="window" />
+		<field type="OUTPUT" name="output" />
+		<field type="CRTC" name="crtc" />
+		<field type="MODE" name="mode" />
+		<field type="CARD16" name="rotation" mask="Rotation" />
+		<field type="CARD8" name="connection" enum="Connection" />
+		<field type="CARD8" name="subpixel_order" enum="SubPixel" />
+	</struct>
+
+	<struct name="OutputProperty">
+		<field type="WINDOW" name="window" />
+		<field type="OUTPUT" name="output" />
+		<field type="ATOM" name="atom" />
+		<field type="TIMESTAMP" name="timestamp" />
+		<field type="CARD8" name="status" enum="Property" />
+		<pad bytes="11" />
+	</struct>
+
+	<union name="NotifyData">
+		<field type="CrtcChange"     name="cc" />
+		<field type="OutputChange"   name="oc" />
+		<field type="OutputProperty" name="op" />
+	</union>
+
+	<event name="Notify" number="1">
+		<field type="CARD8" name="subCode" enum="Notify" />
+		<field type="NotifyData" name="u" />
+	</event>
+</xcb>
diff --git a/libxcb/xcb-proto/src/record.xml b/libxcb/xcb-proto/src/record.xml
new file mode 100644
index 000000000..74c16fe5b
--- /dev/null
+++ b/libxcb/xcb-proto/src/record.xml
@@ -0,0 +1,178 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2005 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="record" extension-xname="RECORD" extension-name="Record"
+    major-version="1" minor-version="13">
+
+    <!-- Types -->
+    <xidtype name="CONTEXT" />
+    
+    <struct name="Range8">
+	<field type="CARD8" name="first" />
+	<field type="CARD8" name="last" />
+    </struct>
+
+    <struct name="Range16">
+	<field type="CARD16" name="first" />
+	<field type="CARD16" name="last" />
+    </struct>
+
+    <struct name="ExtRange">
+	<field type="Range8" name="major" />
+	<field type="Range16" name="minor" />
+    </struct>
+
+    <struct name="Range">
+	<field type="Range8" name="core_requests" />
+	<field type="Range8" name="core_replies" />
+	<field type="ExtRange" name="ext_requests" />
+	<field type="ExtRange" name="ext_replies" />
+	<field type="Range8" name="delivered_events" />
+	<field type="Range8" name="device_events" />
+	<field type="Range8" name="errors" />
+	<field type="BOOL" name="client_started" />
+	<field type="BOOL" name="client_died" />
+    </struct>
+
+    <typedef oldname="CARD8" newname="ElementHeader" />
+    <enum name="HType">
+	<item name="FromServerTime"><bit>0</bit></item>
+	<item name="FromClientTime"><bit>1</bit></item>
+	<item name="FromClientSequence"><bit>2</bit></item>
+    </enum>
+
+    <typedef oldname="CARD32" newname="ClientSpec" />
+    <enum name="CS">
+	<item name="CurrentClients"><value>1</value></item>
+	<item name="FutureClients"><value>2</value></item>
+	<item name="AllClients"><value>3</value></item>
+    </enum>
+
+    <struct name="ClientInfo">
+	<field type="ClientSpec" name="client_resource" />
+	<field type="CARD32" name="num_ranges" />
+	<list type="Range" name="ranges">
+	    <fieldref>num_ranges</fieldref>
+	</list>
+    </struct>
+
+    <!-- Errors -->
+    <error name="BadContext" number="0">
+	<field type="CARD32" name="invalid_record" />
+    </error>
+	
+    <!-- Requests -->
+    <request name="QueryVersion" opcode="0">
+	<field type="CARD16" name="major_version" />
+	<field type="CARD16" name="minor_version" />
+	<reply>
+	    <pad bytes="1"/>
+	    <field type="CARD16" name="major_version" />
+	    <field type="CARD16" name="minor_version" />
+	</reply>
+    </request>
+
+    <request name="CreateContext" opcode="1">
+	<field type="record:CONTEXT" name="context" />
+	<field type="ElementHeader" name="element_header" />
+	<pad bytes="3" />
+	<field type="CARD32" name="num_client_specs" />
+	<field type="CARD32" name="num_ranges" />
+	<list type="ClientSpec" name="client_specs">
+	    <fieldref>num_client_specs</fieldref>
+	</list>
+	<list type="Range" name="ranges">
+	    <fieldref>num_ranges</fieldref>
+	</list>
+    </request>
+
+    <request name="RegisterClients" opcode="2">
+	<field type="record:CONTEXT" name="context" />
+	<field type="ElementHeader" name="element_header" />
+	<pad bytes="3" />
+	<field type="CARD32" name="num_client_specs" />
+	<field type="CARD32" name="num_ranges" />
+	<list type="ClientSpec" name="client_specs">
+	    <fieldref>num_client_specs</fieldref>
+	</list>
+	<list type="Range" name="ranges">
+	    <fieldref>num_ranges</fieldref>
+	</list>
+    </request>
+
+    <request name="UnregisterClients" opcode="3">
+	<field type="record:CONTEXT" name="context" />
+	<field type="CARD32" name="num_client_specs" />
+	<list type="ClientSpec" name="client_specs">
+	    <fieldref>num_client_specs</fieldref>
+	</list>
+    </request>
+
+    <request name="GetContext" opcode="4">
+	<field type="record:CONTEXT" name="context" />
+	<reply>
+	    <field type="BOOL" name="enabled" />
+	    <field type="ElementHeader" name="element_header" />
+	    <pad bytes="3" />
+	    <field type="CARD32" name="num_intercepted_clients" />
+	    <pad bytes="16" />
+	    <list type="ClientInfo" name="intercepted_clients">
+		<fieldref>num_intercepted_clients</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <request name="EnableContext" opcode="5">
+	<field type="record:CONTEXT" name="context" />
+	<reply>
+	    <field type="CARD8" name="category" />
+	    <field type="ElementHeader" name="element_header" />
+	    <field type="BOOL" name="client_swapped" />
+	    <pad bytes="2" />
+	    <field type="CARD32" name="xid_base" />
+	    <field type="CARD32" name="server_time" />
+	    <field type="CARD32" name="rec_sequence_num" />
+	    <pad bytes="8" />
+	    <list type="BYTE" name="data">
+		<op op="*">
+		    <fieldref>length</fieldref>
+		    <value>4</value>
+		</op>
+	    </list>
+	</reply>
+    </request>
+	    
+    <request name="DisableContext" opcode="6">
+	<field type="record:CONTEXT" name="context" />
+    </request>
+
+    <request name="FreeContext" opcode="7">
+	<field type="record:CONTEXT" name="context" />
+    </request>
+    
+</xcb>
diff --git a/libxcb/xcb-proto/src/render.xml b/libxcb/xcb-proto/src/render.xml
new file mode 100644
index 000000000..59cc8e0bb
--- /dev/null
+++ b/libxcb/xcb-proto/src/render.xml
@@ -0,0 +1,568 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2002-2004 Carl D. Worth, Jamey Sharp, Bart Massey, Josh Triplett
+All Rights Reserved.  See the file COPYING in this directory
+for licensing information.
+-->
+<xcb header="render" extension-xname="RENDER" extension-name="Render"
+    major-version="0" minor-version="10">
+  <!-- supports version 0.10 -->
+
+  <import>xproto</import>
+
+  <enum name="PictType">
+    <item name="Indexed" />
+    <item name="Direct" />
+  </enum>
+
+  <enum name="Picture">
+    <item name="None" />
+  </enum>
+
+  <!-- Disjoint* and Conjoint* are new in version 0.2 -->
+  <enum name="PictOp">
+    <item name="Clear" />
+    <item name="Src" />
+    <item name="Dst" />
+    <item name="Over" />
+    <item name="OverReverse" />
+    <item name="In" />
+    <item name="InReverse" />
+    <item name="Out" />
+    <item name="OutReverse" />
+    <item name="Atop" />
+    <item name="AtopReverse" />
+    <item name="Xor" />
+    <item name="Add" />
+    <item name="Saturate" />
+    
+    <item name="DisjointClear"><value>16</value></item>
+    <item name="DisjointSrc" />
+    <item name="DisjointDst" />
+    <item name="DisjointOver" />
+    <item name="DisjointOverReverse" />
+    <item name="DisjointIn" />
+    <item name="DisjointInReverse" />
+    <item name="DisjointOut" />
+    <item name="DisjointOutReverse" />
+    <item name="DisjointAtop" />
+    <item name="DisjointAtopReverse" />
+    <item name="DisjointXor" />
+    
+    <item name="ConjointClear"><value>32</value></item>
+    <item name="ConjointSrc" />
+    <item name="ConjointDst" />
+    <item name="ConjointOver" />
+    <item name="ConjointOverReverse" />
+    <item name="ConjointIn" />
+    <item name="ConjointInReverse" />
+    <item name="ConjointOut" />
+    <item name="ConjointOutReverse" />
+    <item name="ConjointAtop" />
+    <item name="ConjointAtopReverse" />
+    <item name="ConjointXor" />
+  </enum>
+
+  <enum name="PolyEdge">
+    <item name="Sharp" />
+    <item name="Smooth" />
+  </enum>
+
+  <enum name="PolyMode">
+    <item name="Precise" />
+    <item name="Imprecise" />
+  </enum>
+
+  <enum name="CP">
+    <item name="Repeat">          <bit>0</bit></item>
+    <item name="AlphaMap">        <bit>1</bit></item>
+    <item name="AlphaXOrigin">    <bit>2</bit></item>
+    <item name="AlphaYOrigin">    <bit>3</bit></item>
+    <item name="ClipXOrigin">     <bit>4</bit></item>
+    <item name="ClipYOrigin">     <bit>5</bit></item>
+    <item name="ClipMask">        <bit>6</bit></item>
+    <item name="GraphicsExposure"><bit>7</bit></item>
+    <item name="SubwindowMode">   <bit>8</bit></item>
+    <item name="PolyEdge">        <bit>9</bit></item>
+    <item name="PolyMode">        <bit>10</bit></item>
+    <item name="Dither">          <bit>11</bit></item>
+    <item name="ComponentAlpha">  <bit>12</bit></item>
+  </enum>
+
+  <enum name="SubPixel">
+    <item name="Unknown" />
+    <item name="HorizontalRGB" />
+    <item name="HorizontalBGR" />
+    <item name="VerticalRGB" />
+    <item name="VerticalBGR" />
+    <item name="None" />
+  </enum>
+
+  <!-- Extended repeat attributes introduced in 0.10 -->
+  <enum name="Repeat">
+    <item name="None" />
+    <item name="Normal" />
+    <item name="Pad" />
+    <item name="Reflect" />
+  </enum>
+
+  <typedef oldname="CARD32" newname="GLYPH" />
+  <xidtype name="GLYPHSET" />
+
+  <xidtype name="PICTURE" />
+  <xidtype name="PICTFORMAT" />
+
+  <typedef oldname="INT32" newname="FIXED" />
+
+  <error name="PictFormat" number="0" />
+  <error name="Picture" number="1" />
+  <error name="PictOp" number="2" />
+  <error name="GlyphSet" number="3" />
+  <error name="Glyph" number="4" />
+
+  <struct name="DIRECTFORMAT">
+    <field type="CARD16" name="red_shift" />
+    <field type="CARD16" name="red_mask" />
+    <field type="CARD16" name="green_shift" />
+    <field type="CARD16" name="green_mask" />
+    <field type="CARD16" name="blue_shift" />
+    <field type="CARD16" name="blue_mask" />
+    <field type="CARD16" name="alpha_shift" />
+    <field type="CARD16" name="alpha_mask" />
+  </struct>
+
+  <struct name="PICTFORMINFO">
+    <field type="PICTFORMAT" name="id" />
+    <field type="CARD8" name="type" enum="PictType" />
+    <field type="CARD8" name="depth" />
+    <pad bytes="2" />
+    <field type="DIRECTFORMAT" name="direct" />
+    <field type="COLORMAP" name="colormap" />
+  </struct>
+
+  <struct name="PICTVISUAL">
+    <field type="VISUALID" name="visual" />
+    <field type="PICTFORMAT" name="format" />
+  </struct>
+
+  <struct name="PICTDEPTH">
+    <field type="CARD8" name="depth" />
+    <pad bytes="1" />
+    <field type="CARD16" name="num_visuals" />
+    <pad bytes="4" />
+    <list type="PICTVISUAL" name="visuals">
+      <fieldref>num_visuals</fieldref>
+    </list>
+  </struct>
+
+  <struct name="PICTSCREEN">
+    <field type="CARD32" name="num_depths" />
+    <field type="PICTFORMAT" name="fallback" />
+    <list type="PICTDEPTH" name="depths">
+      <fieldref>num_depths</fieldref>
+    </list>
+  </struct>
+
+  <struct name="INDEXVALUE">
+    <field type="CARD32" name="pixel" />
+    <field type="CARD16" name="red" />
+    <field type="CARD16" name="green" />
+    <field type="CARD16" name="blue" />
+    <field type="CARD16" name="alpha" />
+  </struct>
+
+  <struct name="COLOR">
+    <field type="CARD16" name="red" />
+    <field type="CARD16" name="green" />
+    <field type="CARD16" name="blue" />
+    <field type="CARD16" name="alpha" />
+  </struct>
+
+  <struct name="POINTFIX">
+    <field type="FIXED" name="x" />
+    <field type="FIXED" name="y" />
+  </struct>
+
+  <struct name="LINEFIX">
+    <field type="POINTFIX" name="p1" />
+    <field type="POINTFIX" name="p2" />
+  </struct>
+
+  <struct name="TRIANGLE">
+    <field type="POINTFIX" name="p1" />
+    <field type="POINTFIX" name="p2" />
+    <field type="POINTFIX" name="p3" />
+  </struct>
+
+  <struct name="TRAPEZOID">
+    <field type="FIXED" name="top" />
+    <field type="FIXED" name="bottom" />
+    <field type="LINEFIX" name="left" />
+    <field type="LINEFIX" name="right" />
+  </struct>
+
+  <struct name="GLYPHINFO">
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="INT16" name="x_off" />
+    <field type="INT16" name="y_off" />
+  </struct>
+
+
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD32" name="client_major_version" />
+    <field type="CARD32" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="major_version" />
+      <field type="CARD32" name="minor_version" />
+      <pad bytes="16" />
+    </reply>
+  </request>
+
+  <request name="QueryPictFormats" opcode="1">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="num_formats" />
+      <field type="CARD32" name="num_screens" />
+      <field type="CARD32" name="num_depths" />
+      <field type="CARD32" name="num_visuals" />
+      <field type="CARD32" name="num_subpixel" /> <!-- new in version 0.6 -->
+      <pad bytes="4" />
+      <list type="PICTFORMINFO" name="formats">
+        <fieldref>num_formats</fieldref>
+      </list>
+      <list type="PICTSCREEN" name="screens">
+        <fieldref>num_screens</fieldref>
+      </list>
+      <list type="CARD32" name="subpixels" enum="SubPixel" >
+        <fieldref>num_subpixel</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <!-- from version 0.7 -->
+  <request name="QueryPictIndexValues" opcode="2">
+    <field type="PICTFORMAT" name="format" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="num_values" />
+      <pad bytes="20" />
+      <list type="INDEXVALUE" name="values">
+        <fieldref>num_values</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <!-- opcode 3 reserved for QueryDithers -->
+
+  <request name="CreatePicture" opcode="4">
+    <field type="PICTURE" name="pid" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="PICTFORMAT" name="format" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="ChangePicture" opcode="5">
+    <field type="PICTURE" name="picture" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="SetPictureClipRectangles" opcode="6">
+    <field type="PICTURE" name="picture" />
+    <field type="INT16" name="clip_x_origin" />
+    <field type="INT16" name="clip_y_origin" />
+    <list type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="FreePicture" opcode="7">
+    <field type="PICTURE" name="picture" />
+  </request>
+
+  <request name="Composite" opcode="8">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="mask" altenum="Picture" />
+    <field type="PICTURE" name="dst" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <field type="INT16" name="mask_x" />
+    <field type="INT16" name="mask_y" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </request>
+
+  <!-- opcode 9 reserved for Scale -->
+
+  <request name="Trapezoids" opcode="10">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="TRAPEZOID" name="traps" />
+  </request>
+
+  <request name="Triangles" opcode="11">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="TRIANGLE" name="triangles" />
+  </request>
+
+  <request name="TriStrip" opcode="12">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="POINTFIX" name="points" />
+  </request>
+
+  <request name="TriFan" opcode="13">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="POINTFIX" name="points" />
+  </request>
+
+  <!-- opcode 14 reserved for ColorTrapezoids -->
+
+  <!-- opcode 15 reserved for ColorTriangles -->
+
+  <!-- opcode 16 reserved for Transform -->
+
+  <request name="CreateGlyphSet" opcode="17">
+    <field type="GLYPHSET" name="gsid" />
+    <field type="PICTFORMAT" name="format" />
+  </request>
+
+  <request name="ReferenceGlyphSet" opcode="18">
+    <field type="GLYPHSET" name="gsid" />
+    <field type="GLYPHSET" name="existing" />
+  </request>
+
+  <request name="FreeGlyphSet" opcode="19">
+    <field type="GLYPHSET" name="glyphset" />
+  </request>
+
+  <request name="AddGlyphs" opcode="20">
+    <field type="GLYPHSET" name="glyphset" />
+    <field type="CARD32" name="glyphs_len" />
+    <list type="CARD32" name="glyphids">
+      <fieldref>glyphs_len</fieldref>
+    </list>
+    <list type="GLYPHINFO" name="glyphs">
+      <fieldref>glyphs_len</fieldref>
+    </list>
+    <list type="BYTE" name="data" />
+  </request>
+
+  <!-- opcode 21 reserved for AddGlyphsFromPicture -->
+
+  <request name="FreeGlyphs" opcode="22">
+    <field type="GLYPHSET" name="glyphset" />
+    <list type="GLYPH" name="glyphs" />
+  </request>
+
+  <request name="CompositeGlyphs8" opcode="23">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="GLYPHSET" name="glyphset" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="BYTE" name="glyphcmds" />
+  </request>
+
+  <request name="CompositeGlyphs16" opcode="24">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="GLYPHSET" name="glyphset" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="BYTE" name="glyphcmds" />
+  </request>
+
+  <request name="CompositeGlyphs32" opcode="25">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="src" />
+    <field type="PICTURE" name="dst" />
+    <field type="PICTFORMAT" name="mask_format" />
+    <field type="GLYPHSET" name="glyphset" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <list type="BYTE" name="glyphcmds" />
+  </request>
+
+  <!-- new in version 0.1 -->
+
+  <request name="FillRectangles" opcode="26">
+    <field type="CARD8" name="op" enum="PictOp" />
+    <pad bytes="3" />
+    <field type="PICTURE" name="dst" />
+    <field type="COLOR" name="color" />
+    <list type="RECTANGLE" name="rects" />
+  </request>
+
+  <!-- new in version 0.5 -->
+
+  <request name="CreateCursor" opcode="27">
+    <field type="CURSOR" name="cid" />
+    <field type="PICTURE" name="source" />
+    <field type="CARD16" name="x" />
+    <field type="CARD16" name="y" />
+  </request>
+
+  <!-- new in version 0.6 -->
+
+  <struct name="TRANSFORM">
+    <field type="FIXED" name="matrix11" />
+    <field type="FIXED" name="matrix12" />
+    <field type="FIXED" name="matrix13" />
+    <field type="FIXED" name="matrix21" />
+    <field type="FIXED" name="matrix22" />
+    <field type="FIXED" name="matrix23" />
+    <field type="FIXED" name="matrix31" />
+    <field type="FIXED" name="matrix32" />
+    <field type="FIXED" name="matrix33" />
+  </struct>
+
+  <request name="SetPictureTransform" opcode="28">
+    <field type="PICTURE" name="picture" />
+    <field type="TRANSFORM" name="transform" />
+  </request>
+
+  <request name="QueryFilters" opcode="29">
+    <field type="DRAWABLE" name="drawable" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="num_aliases" />
+      <field type="CARD32" name="num_filters" />
+      <pad bytes="16" />
+      <list type="CARD16" name="aliases">
+        <fieldref>num_aliases</fieldref>
+      </list>
+      <list type="STR" name="filters">
+        <fieldref>num_filters</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetPictureFilter" opcode="30">
+    <field type="PICTURE" name="picture" />
+    <field type="CARD16" name="filter_len" />
+    <pad bytes="2" />
+    <list type="char" name="filter">
+      <fieldref>filter_len</fieldref>
+    </list>
+    <list type="FIXED" name="values" />
+  </request>
+
+  <!-- new in version 0.8 -->
+
+  <struct name="ANIMCURSORELT">
+    <field type="CURSOR" name="cursor" />
+    <field type="CARD32" name="delay" />
+  </struct>
+
+  <request name="CreateAnimCursor" opcode="31">
+    <field type="CURSOR" name="cid" />
+    <list type="ANIMCURSORELT" name="cursors" />
+  </request>
+
+  <!-- new in version 0.9 -->
+ 
+  <struct name="SPANFIX">
+    <field type="FIXED" name="l" />
+    <field type="FIXED" name="r" />
+    <field type="FIXED" name="y" />
+  </struct>
+
+  <struct name="TRAP">
+    <field type="SPANFIX" name="top" />
+    <field type="SPANFIX" name="bot" />
+  </struct>
+
+  <request name="AddTraps" opcode="32">
+    <field type="PICTURE" name="picture" />
+    <field type="INT16" name="x_off" />
+    <field type="INT16" name="y_off" />
+    <list type="TRAP" name="traps" />
+  </request>
+  
+  <!-- new in version 0.10 -->
+
+  <request name="CreateSolidFill" opcode="33">
+    <field type="PICTURE" name="picture" />
+    <field type="COLOR" name="color" />
+  </request>
+
+  <request name="CreateLinearGradient" opcode="34">
+    <field type="PICTURE" name="picture" />
+    <field type="POINTFIX" name="p1" />
+    <field type="POINTFIX" name="p2" />
+    <field type="CARD32" name="num_stops" />
+    <list type="FIXED" name="stops">
+      <fieldref>num_stops</fieldref>
+    </list>
+    <list type="COLOR" name="colors">
+      <fieldref>num_stops</fieldref>
+    </list>
+  </request>
+
+  <request name="CreateRadialGradient" opcode="35">
+    <field type="PICTURE" name="picture" />
+    <field type="POINTFIX" name="inner" />
+    <field type="POINTFIX" name="outer" />
+    <field type="FIXED" name="inner_radius" />
+    <field type="FIXED" name="outer_radius" />
+    <field type="CARD32" name="num_stops" />
+    <list type="FIXED" name="stops">
+      <fieldref>num_stops</fieldref>
+    </list>
+    <list type="COLOR" name="colors">
+      <fieldref>num_stops</fieldref>
+    </list>
+  </request>
+
+  <request name="CreateConicalGradient" opcode="36">
+    <field type="PICTURE" name="picture" />
+    <field type="POINTFIX" name="center" />
+    <field type="FIXED" name="angle" />        <!-- degrees -->
+    <field type="CARD32" name="num_stops" />
+    <list type="FIXED" name="stops">
+      <fieldref>num_stops</fieldref>
+    </list>
+    <list type="COLOR" name="colors">
+      <fieldref>num_stops</fieldref>
+    </list>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/res.xml b/libxcb/xcb-proto/src/res.xml
new file mode 100644
index 000000000..d758d893b
--- /dev/null
+++ b/libxcb/xcb-proto/src/res.xml
@@ -0,0 +1,83 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Jeremy Kolb
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="res" extension-xname="X-Resource" extension-name="Res"
+    major-version="1" minor-version="0">
+    <import>xproto</import>
+
+    <struct name="Client">
+        <field type="CARD32" name="resource_base" />
+        <field type="CARD32" name="resource_mask" />
+    </struct>
+
+    <struct name="Type">
+        <field type="ATOM" name="resource_type" />
+        <field type="CARD32" name="count" />
+    </struct>
+
+    <request name="QueryVersion" opcode="0">
+        <field type="CARD8" name="client_major" />
+        <field type="CARD8" name="client_minor" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="server_major" />
+            <field type="CARD16" name="server_minor" />
+        </reply>
+    </request>
+
+    <request name="QueryClients" opcode="1">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num_clients" />
+            <pad bytes="20" />
+            <list type="Client" name="clients">
+                <fieldref>num_clients</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="QueryClientResources" opcode="2">
+        <field type="CARD32" name="xid" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num_types" />
+            <pad bytes="20" />
+            <list type="Type" name="types">
+                <fieldref>num_types</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="QueryClientPixmapBytes" opcode="3">
+        <field type="CARD32" name="xid" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="bytes" />
+            <field type="CARD32" name="bytes_overflow" />
+        </reply>
+    </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/screensaver.xml b/libxcb/xcb-proto/src/screensaver.xml
new file mode 100644
index 000000000..9c7bccb08
--- /dev/null
+++ b/libxcb/xcb-proto/src/screensaver.xml
@@ -0,0 +1,128 @@
+<!--
+
+Copyright (C) 2005 Vincent Torri.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!--
+Screen Saver Extension to the X Protocol
+Draft Standard Version 1.1
+-->
+<xcb header="screensaver" extension-xname="MIT-SCREEN-SAVER" extension-name="ScreenSaver" major-version="1" minor-version="1">
+
+  <!-- Types -->
+
+  <import>xproto</import>
+
+  <enum name="Kind">
+    <item name="Blanked" />
+    <item name="Internal" />
+    <item name="External" />
+  </enum>
+
+  <enum name="Event">
+    <item name="NotifyMask"><bit>0</bit></item>
+    <item name="CycleMask"> <bit>1</bit></item>
+  </enum>
+
+  <enum name="State">
+    <item name="Off" />
+    <item name="On" />
+    <item name="Cycle" />
+    <item name="Disabled" />
+  </enum>
+
+  <!-- Errors -->
+  <!-- Requests -->
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD8" name="client_major_version"/>
+    <field type="CARD8" name="client_minor_version"/>
+    <pad bytes="2"/>
+    <reply>
+      <pad bytes="1"/>
+      <field type="CARD16" name="server_major_version"/>
+      <field type="CARD16" name="server_minor_version"/>
+      <pad bytes="20"/>
+    </reply>
+  </request>
+
+  <request name="QueryInfo" opcode="1">
+    <field type="DRAWABLE" name="drawable"/>
+    <reply>
+      <field type="CARD8" name="state"/>
+      <field type="WINDOW" name="saver_window"/>
+      <field type="CARD32" name="ms_until_server"/>
+      <field type="CARD32" name="ms_since_user_input"/>
+      <field type="CARD32" name="event_mask" />
+      <field type="BYTE" name="kind"/>  <!-- enum Kind -->
+      <pad bytes="7"/>
+    </reply>
+  </request>
+
+  <request name="SelectInput" opcode="2">
+    <field type="DRAWABLE" name="drawable"/>
+    <field type="CARD32" name="event_mask" />   <!-- enum Event -->
+  </request>
+
+  <request name="SetAttributes" opcode="3">
+    <field type="DRAWABLE" name="drawable"/>
+    <field type="INT16" name="x"/>
+    <field type="INT16" name="y"/>
+    <field type="CARD16" name="width"/>
+    <field type="CARD16" name="height"/>
+    <field type="CARD16" name="border_width"/>
+    <field type="BYTE" name="class"/>   <!-- enum XCBWindowClass -->
+    <field type="CARD8" name="depth"/>
+    <field type="VISUALID" name="visual"/>
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="UnsetAttributes" opcode="4">
+    <field type="DRAWABLE" name="drawable"/>
+  </request>
+  
+  <!-- version 1.1 -->
+  <request name="Suspend" opcode="5">
+    <field type="BOOL" name="suspend" />
+    <pad bytes="3" />
+  </request>
+
+  <!-- Events -->
+
+  <event name="Notify" number="0">
+    <field type="CARD8" name="code"/>
+    <field type="BYTE" name="state"/>    <!-- enum State -->
+    <pad bytes="1" />
+    <field type="CARD16" name="sequence_number"/>
+    <field type="TIMESTAMP" name="time"/>
+    <field type="WINDOW" name="root"/>
+    <field type="WINDOW" name="window"/>
+    <field type="BYTE" name="kind"/>     <!-- enum Kind -->
+    <field type="BOOL" name="forced"/>
+    <pad bytes="14"/>
+  </event>
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/shape.xml b/libxcb/xcb-proto/src/shape.xml
new file mode 100644
index 000000000..8d76de887
--- /dev/null
+++ b/libxcb/xcb-proto/src/shape.xml
@@ -0,0 +1,154 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!-- This file describes version 1.1 of the Shape extension. -->
+<xcb header="shape" extension-xname="SHAPE" extension-name="Shape" major-version="1" minor-version="1">
+  <import>xproto</import>
+
+  <typedef oldname="CARD8" newname="OP" />
+  <typedef oldname="CARD8" newname="KIND" />
+
+  <!-- Shape attributes of type OP. -->
+  <enum name="SO">
+    <item name="Set" />
+    <item name="Union" />
+    <item name="Intersect" />
+    <item name="Subtract" />
+    <item name="Invert" />
+  </enum>
+
+  <!-- Shape attributes of type KIND. -->
+  <enum name="SK">
+    <item name="Bounding" />
+    <item name="Clip" />
+    <item name="Input" />      <!-- added in version 1.1 -->
+  </enum>
+
+  <event name="Notify" number="0">
+    <field type="KIND" name="shape_kind" enum="SK" />
+    <field type="WINDOW" name="affected_window" />
+    <field type="INT16" name="extents_x" />
+    <field type="INT16" name="extents_y" />
+    <field type="CARD16" name="extents_width" />
+    <field type="CARD16" name="extents_height" />
+    <field type="TIMESTAMP" name="server_time" />
+    <field type="BOOL" name="shaped" />
+    <pad bytes="11" />
+  </event>
+
+  <request name="QueryVersion" opcode="0">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="major_version" />
+      <field type="CARD16" name="minor_version" />
+    </reply>
+  </request>
+
+  <request name="Rectangles" opcode="1">
+    <field type="OP" name="operation" enum="SO" />
+    <field type="KIND" name="destination_kind" enum="SK" />
+    <field type="BYTE" name="ordering" enum="ClipOrdering" />
+    <pad bytes="1" />
+    <field type="WINDOW" name="destination_window" />
+    <field type="INT16" name="x_offset" />
+    <field type="INT16" name="y_offset" />
+    <list type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="Mask" opcode="2">
+    <field type="OP" name="operation" enum="SO" />
+    <field type="KIND" name="destination_kind" enum="SK" />
+    <pad bytes="2" />
+    <field type="WINDOW" name="destination_window" />
+    <field type="INT16" name="x_offset" />
+    <field type="INT16" name="y_offset" />
+    <field type="PIXMAP" name="source_bitmap" altenum="Pixmap" />
+  </request>
+
+  <request name="Combine" opcode="3">
+    <field type="OP" name="operation" enum="SO" />
+    <field type="KIND" name="destination_kind" enum="SK" />
+    <field type="KIND" name="source_kind" enum="SK" />
+    <pad bytes="1" />
+    <field type="WINDOW" name="destination_window" />
+    <field type="INT16" name="x_offset" />
+    <field type="INT16" name="y_offset" />
+    <field type="WINDOW" name="source_window" />
+  </request>
+
+  <request name="Offset" opcode="4">
+    <field type="KIND" name="destination_kind" enum="SK" />
+    <pad bytes="3" />
+    <field type="WINDOW" name="destination_window" />
+    <field type="INT16" name="x_offset" />
+    <field type="INT16" name="y_offset" />
+  </request>
+
+  <request name="QueryExtents" opcode="5">
+    <field type="WINDOW" name="destination_window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="BOOL" name="bounding_shaped" />
+      <field type="BOOL" name="clip_shaped" />
+      <pad bytes="2" />
+      <field type="INT16" name="bounding_shape_extents_x" />
+      <field type="INT16" name="bounding_shape_extents_y" />
+      <field type="CARD16" name="bounding_shape_extents_width" />
+      <field type="CARD16" name="bounding_shape_extents_height" />
+      <field type="INT16" name="clip_shape_extents_x" />
+      <field type="INT16" name="clip_shape_extents_y" />
+      <field type="CARD16" name="clip_shape_extents_width" />
+      <field type="CARD16" name="clip_shape_extents_height" />
+    </reply>
+  </request>
+
+  <request name="SelectInput" opcode="6">
+    <field type="WINDOW" name="destination_window" />
+    <field type="BOOL" name="enable" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="InputSelected" opcode="7">
+    <field type="WINDOW" name="destination_window" />
+    <reply>
+      <field type="BOOL" name="enabled" />
+    </reply>
+  </request>
+
+  <request name="GetRectangles" opcode="8">
+    <field type="WINDOW" name="window" />
+    <field type="KIND" name="source_kind" enum="SK" />
+    <pad bytes="3" />
+    <reply>
+      <field type="BYTE" name="ordering" enum="ClipOrdering" />
+      <field type="CARD32" name="rectangles_len" />
+      <list type="RECTANGLE" name="rectangles">
+        <fieldref>rectangles_len</fieldref>
+      </list>
+    </reply>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/shm.xml b/libxcb/xcb-proto/src/shm.xml
new file mode 100644
index 000000000..adda50957
--- /dev/null
+++ b/libxcb/xcb-proto/src/shm.xml
@@ -0,0 +1,116 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="shm" extension-xname="MIT-SHM" extension-name="Shm"
+    major-version="1" minor-version="1">
+  <import>xproto</import>
+
+  <xidtype name="SEG" />
+
+  <event name="Completion" number="0">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="minor_event" />
+    <field type="BYTE" name="major_event" />
+    <pad bytes="1" />
+    <field type="SEG" name="shmseg" />
+    <field type="CARD32" name="offset" />
+  </event>
+
+  <errorcopy name="BadSeg" number="0" ref="Value" />
+
+  <request name="QueryVersion" opcode="0">
+    <reply>
+      <field type="BOOL" name="shared_pixmaps" />
+      <field type="CARD16" name="major_version" />
+      <field type="CARD16" name="minor_version" />
+      <field type="CARD16" name="uid" />
+      <field type="CARD16" name="gid" />
+      <field type="CARD8" name="pixmap_format" />
+      <pad bytes="15" />
+    </reply>
+  </request>
+
+  <request name="Attach" opcode="1">
+    <field type="SEG" name="shmseg" />
+    <field type="CARD32" name="shmid" />
+    <field type="BOOL" name="read_only" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="Detach" opcode="2">
+    <field type="SEG" name="shmseg" />
+  </request>
+
+  <request name="PutImage" opcode="3">
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="CARD16" name="total_width" />
+    <field type="CARD16" name="total_height" />
+    <field type="CARD16" name="src_x" />
+    <field type="CARD16" name="src_y" />
+    <field type="CARD16" name="src_width" />
+    <field type="CARD16" name="src_height" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+    <field type="CARD8" name="depth" />
+    <field type="CARD8" name="format" />
+    <field type="CARD8" name="send_event" />
+    <pad bytes="1" />
+    <field type="SEG" name="shmseg" />
+    <field type="CARD32" name="offset" />
+  </request>
+
+  <request name="GetImage" opcode="4">
+    <field type="DRAWABLE" name="drawable" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD32" name="plane_mask" />
+    <field type="CARD8" name="format" />
+    <pad bytes="3" />
+    <field type="SEG" name="shmseg" />
+    <field type="CARD32" name="offset" />
+    <reply>
+      <field type="CARD8" name="depth" />
+      <field type="VISUALID" name="visual" />
+      <field type="CARD32" name="size" />
+    </reply>
+  </request>
+
+  <request name="CreatePixmap" opcode="5">
+    <field type="PIXMAP" name="pid" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD8" name="depth" />
+    <pad bytes="3" />
+    <field type="SEG" name="shmseg" />
+    <field type="CARD32" name="offset" />
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/sync.xml b/libxcb/xcb-proto/src/sync.xml
new file mode 100644
index 000000000..e30923325
--- /dev/null
+++ b/libxcb/xcb-proto/src/sync.xml
@@ -0,0 +1,196 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Mikko Torni and Josh Triplett.
+All Rights Reserved.  See the file COPYING in this directory
+for licensing information.
+-->
+<xcb header="sync" extension-xname="SYNC" extension-name="Sync"
+    major-version="3" minor-version="0">
+  <import>xproto</import>
+
+  <xidtype name="ALARM" />
+
+  <enum name="ALARMSTATE">
+    <item name="Active" />
+    <item name="Inactive" />
+    <item name="Destroyed" />
+  </enum>
+
+  <xidtype name="COUNTER" />
+
+  <enum name="TESTTYPE">
+    <item name="PositiveTransition" />
+    <item name="NegativeTransition" />
+    <item name="PositiveComparison" />
+    <item name="NegativeComparison" />
+  </enum>
+
+  <enum name="VALUETYPE">
+    <item name="Absolute" />
+    <item name="Relative" />
+  </enum>
+
+  <enum name="CA">
+    <item name="Counter">  <bit>0</bit></item>
+    <item name="ValueType"><bit>1</bit></item>
+    <item name="Value">    <bit>2</bit></item>
+    <item name="TestType"> <bit>3</bit></item>
+    <item name="Delta">    <bit>4</bit></item>
+    <item name="Events">   <bit>5</bit></item>
+  </enum>
+
+  <struct name="INT64">
+    <field type="INT32" name="hi" />
+    <field type="CARD32" name="lo" />
+  </struct>
+
+  <struct name="SYSTEMCOUNTER">
+    <field type="COUNTER" name="counter" />
+    <field type="INT64" name="resolution" />
+    <field type="CARD16" name="name_len" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+  </struct>
+
+  <struct name="TRIGGER">
+    <field type="COUNTER" name="counter" />
+    <field type="CARD32" name="wait_type" enum="VALUETYPE" />
+    <field type="INT64" name="wait_value" />
+    <field type="CARD32" name="test_type" enum="TESTTYPE" />
+  </struct>
+
+  <struct name="WAITCONDITION">
+    <field type="TRIGGER" name="trigger" />
+    <field type="INT64" name="event_threshold" />
+  </struct>
+
+  <error name="Counter" number="0">
+    <field type="CARD32" name="bad_counter" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD8" name="major_opcode" />
+  </error>
+
+  <error name="Alarm" number="1">
+    <field type="CARD32" name="bad_alarm" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD8" name="major_opcode" />
+  </error>
+    
+  <request name="Initialize" opcode="0">
+    <field type="CARD8" name="desired_major_version" />
+    <field type="CARD8" name="desired_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD8" name="major_version" />
+      <field type="CARD8" name="minor_version" />
+      <pad bytes="22" />
+    </reply>
+  </request>
+
+  <request name="ListSystemCounters" opcode="1">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="counters_len" />
+      <pad bytes="20" />
+      <list type="SYSTEMCOUNTER" name="counters">
+        <fieldref>counters_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="CreateCounter" opcode="2">
+    <field type="COUNTER" name="id" />
+    <field type="INT64" name="initial_value" />
+  </request>
+
+  <request name="DestroyCounter" opcode="6">
+    <field type="COUNTER" name="counter" />
+  </request>
+
+  <request name="QueryCounter" opcode="5">
+    <field type="COUNTER" name="counter" />
+    <reply>
+      <pad bytes="1" />
+      <field type="INT64" name="counter_value" />
+    </reply>
+  </request>
+
+  <request name="Await" opcode="7">
+    <list type="WAITCONDITION" name="wait_list" />
+  </request>
+
+  <request name="ChangeCounter" opcode="4">
+    <field type="COUNTER" name="counter" />
+    <field type="INT64" name="amount" />
+  </request>
+
+  <request name="SetCounter" opcode="3">
+    <field type="COUNTER" name="counter" />
+    <field type="INT64" name="value" />
+  </request>
+
+  <request name="CreateAlarm" opcode="8">
+    <field type="ALARM" name="id" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="ChangeAlarm" opcode="9">
+    <field type="ALARM" name="id" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="DestroyAlarm" opcode="11">
+    <field type="ALARM" name="alarm" />
+  </request>
+
+  <request name="QueryAlarm" opcode="10">
+    <field type="ALARM" name="alarm" />
+    <reply>
+      <pad bytes="1" />
+      <field type="TRIGGER" name="trigger" />
+      <field type="INT64" name="delta" />
+      <field type="BOOL" name="events" />
+      <field type="CARD8" name="state" enum="ALARMSTATE" />
+      <pad bytes="2" />
+    </reply>
+  </request>
+
+  <request name="SetPriority" opcode="12">
+    <field type="CARD32" name="id" />
+    <field type="INT32" name="priority" />
+  </request>
+    
+  <request name="GetPriority" opcode="13">
+    <field type="CARD32" name="id" />
+    <reply>
+      <pad bytes="1" />
+      <field type="INT32" name="priority" />
+    </reply>
+  </request>
+
+  <event name="CounterNotify" number="0">
+    <field type="CARD8" name="kind" />
+    <field type="COUNTER" name="counter" />
+    <field type="INT64" name="wait_value" />
+    <field type="INT64" name="counter_value" />
+    <field type="TIMESTAMP" name="timestamp" />
+    <field type="CARD16" name="count" />
+    <field type="BOOL" name="destroyed" />
+    <pad bytes="1" />
+  </event>
+
+  <event name="AlarmNotify" number="1">
+    <field type="CARD8" name="kind" />
+    <field type="ALARM" name="alarm" />
+    <field type="INT64" name="counter_value" />
+    <field type="INT64" name="alarm_value" />
+    <field type="TIMESTAMP" name="timestamp" />
+    <field type="CARD8" name="state" enum="ALARMSTATE" />
+    <pad bytes="3" />
+  </event>
+</xcb>
diff --git a/libxcb/xcb-proto/src/xc_misc.xml b/libxcb/xcb-proto/src/xc_misc.xml
new file mode 100644
index 000000000..139ca22f0
--- /dev/null
+++ b/libxcb/xcb-proto/src/xc_misc.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Mikko Torni and Josh Triplett.
+All Rights Reserved.  See the file COPYING in this directory
+for licensing information.
+-->
+<xcb header="xc_misc" extension-xname="XC-MISC" extension-name="XCMisc"
+    extension-multiword="true" major-version="1" minor-version="1">
+  <request name="GetVersion" opcode="0">
+    <field type="CARD16" name="client_major_version" />
+    <field type="CARD16" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="server_major_version" />
+      <field type="CARD16" name="server_minor_version" />
+    </reply>
+  </request>
+
+  <request name="GetXIDRange" opcode="1">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="start_id" />
+      <field type="CARD32" name="count" />
+    </reply>
+  </request>
+
+  <request name="GetXIDList" opcode="2">
+    <field type="CARD32" name="count" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="ids_len" />
+      <pad bytes="20" />
+      <list type="CARD32" name="ids">
+        <fieldref>ids_len</fieldref>
+      </list>
+    </reply>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/xcb.xsd b/libxcb/xcb-proto/src/xcb.xsd
new file mode 100644
index 000000000..54a73705e
--- /dev/null
+++ b/libxcb/xcb-proto/src/xcb.xsd
@@ -0,0 +1,239 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Josh Triplett.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+
+  <!-- The root element -->
+  <xsd:element name="xcb">
+    <xsd:complexType>
+      <xsd:group ref="macro" minOccurs="0" maxOccurs="unbounded" />
+      <xsd:attribute name="header" type="xsd:string" use="required" />
+      <xsd:attribute name="extension-xname" type="xsd:string" use="optional" />
+      <xsd:attribute name="extension-name"  type="xsd:string" use="optional" />
+      <xsd:attribute name="extension-multiword" type="xsd:boolean" use="optional" default="false" />
+      <xsd:attribute name="major-version"   type="xsd:integer" use="optional" />
+      <xsd:attribute name="minor-version"   type="xsd:integer" use="optional" />
+    </xsd:complexType>
+  </xsd:element>
+
+  <!-- Padding -->
+  <xsd:element name="pad">
+    <xsd:complexType>
+      <xsd:attribute name="bytes" type="xsd:integer" use="required" />
+    </xsd:complexType>
+  </xsd:element>
+
+  <!-- Type for fields or parameters with attributes "name" and "type" -->
+  <xsd:complexType name="var">
+    <xsd:attribute name="name" type="xsd:string" use="required" />
+    <xsd:attribute name="type" type="xsd:string" use="required" />
+    <xsd:attribute name="enum" type="xsd:string" use="optional" />
+    <xsd:attribute name="altenum" type="xsd:string" use="optional" />
+    <xsd:attribute name="mask" type="xsd:string" use="optional" />
+  </xsd:complexType>
+
+  <!-- field replaces FIELD, PARAM, and REPLY. -->
+  <xsd:element name="field" type="var" />
+
+  <!-- list replaces ARRAYFIELD, LISTPARAM, and ARRAYREPLY.  The name and type
+       are specified as attributes.  The content is an expression giving the
+       length. -->
+  <xsd:element name="list">
+    <xsd:complexType>
+      <xsd:complexContent>
+        <xsd:extension base="var">
+          <xsd:group ref="expression" minOccurs="0" maxOccurs="1" />
+        </xsd:extension>
+      </xsd:complexContent>
+    </xsd:complexType>
+  </xsd:element>
+
+  <!-- Expressions -->
+  <xsd:group name="expression">
+    <xsd:choice>
+      <xsd:element name="op">
+        <xsd:complexType>
+          <xsd:sequence>
+            <xsd:group ref="expression" />
+            <xsd:group ref="expression" />
+          </xsd:sequence>
+          <xsd:attribute name="op" use="required">
+            <xsd:simpleType>
+              <xsd:restriction base="xsd:string">
+                <xsd:pattern value="\+|-|\*|/|&amp;|&lt;&lt;" />
+              </xsd:restriction>
+            </xsd:simpleType>
+          </xsd:attribute>
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="fieldref" type="xsd:string" />
+      <xsd:element name="value" type="dec-or-hex-integer" />
+      <xsd:element name="bit" type="xsd:integer" />
+    </xsd:choice>
+  </xsd:group>
+  
+  <!-- Fields in requests that are calculated from other information, not
+       supplied by the caller. -->
+  <xsd:element name="exprfield" >
+    <xsd:complexType>
+      <xsd:complexContent>
+        <xsd:extension base="var">
+          <xsd:group ref="expression" />
+        </xsd:extension>
+      </xsd:complexContent>
+    </xsd:complexType>
+  </xsd:element>
+
+  <!-- BITMASK/LISTofVALUE parameter pairs. -->
+  <xsd:element name="valueparam">
+    <xsd:complexType>
+      <xsd:attribute name="value-mask-type" type="xsd:string" use="required" />
+      <xsd:attribute name="value-mask-name" type="xsd:string" use="required" />
+      <!-- This pad is currently needed only by ConfigureWindow.  Sigh. -->
+      <xsd:attribute name="value-mask-pad" type="xsd:integer" use="optional" />
+      <xsd:attribute name="value-list-name" type="xsd:string" use="required" />
+    </xsd:complexType>
+  </xsd:element>
+
+  <xsd:group name="fields">
+    <xsd:choice>
+      <xsd:element ref="pad" />
+      <xsd:element ref="field" />
+      <xsd:element ref="list" />
+    </xsd:choice>
+  </xsd:group>
+
+  <!-- Type for a structure -->
+  <xsd:complexType name="struct">
+    <xsd:group ref="fields" minOccurs="1" maxOccurs="unbounded" />
+    <xsd:attribute name="name" type="xsd:string" use="required" />
+  </xsd:complexType>
+
+  <!-- Type for a packet structure -->
+  <xsd:complexType name="packet-struct">
+    <xsd:group ref="fields" minOccurs="0" maxOccurs="unbounded" />
+    <xsd:attribute name="name" type="xsd:string" use="required" />
+    <xsd:attribute name="number" type="xsd:integer" use="required" />
+  </xsd:complexType>
+
+  <!-- Type for a packet structure copy -->
+  <xsd:complexType name="packet-struct-copy">
+    <xsd:attribute name="name" type="xsd:string" use="required" />
+    <xsd:attribute name="number" type="xsd:integer" use="required" />
+    <xsd:attribute name="ref" type="xsd:string" use="required" />
+  </xsd:complexType>
+
+  <!-- Type for hex integers -->
+  <xsd:simpleType name="hex-integer">
+    <xsd:restriction base="xsd:string">
+      <xsd:pattern value="0x[0-9a-fA-F]+" />
+    </xsd:restriction>
+  </xsd:simpleType>
+
+  <!-- Type for integers in either decimal or hex -->
+  <xsd:simpleType name="dec-or-hex-integer">
+    <xsd:union memberTypes="xsd:integer hex-integer" />
+  </xsd:simpleType>
+
+  <xsd:group name="macro">
+    <xsd:choice>
+      <xsd:element name="request">
+        <xsd:complexType>
+          <xsd:sequence>
+            <xsd:choice minOccurs="0" maxOccurs="unbounded">
+              <xsd:group ref="fields" />
+              <xsd:element ref="exprfield" />
+              <xsd:element ref="valueparam" />
+            </xsd:choice>
+            <xsd:element name="reply" minOccurs="0" maxOccurs="1">
+              <xsd:complexType>
+                <xsd:choice minOccurs="1" maxOccurs="unbounded">
+                  <xsd:group ref="fields" />
+                  <xsd:element ref="valueparam" />
+                </xsd:choice>
+              </xsd:complexType>
+            </xsd:element>
+          </xsd:sequence>
+          <xsd:attribute name="name" type="xsd:string" use="required" />
+          <xsd:attribute name="opcode" type="xsd:integer" use="required" />
+          <xsd:attribute name="combine-adjacent" type="xsd:boolean"
+                         use="optional"/>
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="event">
+        <xsd:complexType>
+          <xsd:complexContent>
+            <xsd:extension base="packet-struct">
+              <xsd:attribute name="no-sequence-number" type="xsd:boolean"
+                             use="optional" />
+            </xsd:extension>
+          </xsd:complexContent>
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="eventcopy" type="packet-struct-copy" />
+      <xsd:element name="error" type="packet-struct" />
+      <xsd:element name="errorcopy" type="packet-struct-copy" />
+      <xsd:element name="struct" type="struct" />
+      <xsd:element name="union" type="struct" />
+      <xsd:element name="xidtype">
+        <xsd:complexType>
+          <xsd:attribute name="name" type="xsd:string" use="required" />
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="xidunion">
+        <xsd:complexType>
+          <xsd:sequence>
+            <xsd:element name="type" type="xsd:string"
+                         minOccurs="1" maxOccurs="unbounded" />
+          </xsd:sequence>
+          <xsd:attribute name="name" type="xsd:string" use="required" />
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="enum">
+        <xsd:complexType>
+          <xsd:sequence minOccurs="1" maxOccurs="unbounded">
+            <xsd:element name="item">
+              <xsd:complexType>
+                <xsd:group ref="expression" minOccurs="0" maxOccurs="1" />
+                <xsd:attribute name="name" type="xsd:string" use="required" />
+              </xsd:complexType>
+            </xsd:element>
+          </xsd:sequence>
+          <xsd:attribute name="name" type="xsd:string" use="required" />
+        </xsd:complexType>
+      </xsd:element>
+      <xsd:element name="typedef">
+        <xsd:complexType>
+          <xsd:attribute name="oldname" type="xsd:string" use="required" />
+          <xsd:attribute name="newname" type="xsd:string" use="required" />
+        </xsd:complexType>
+      </xsd:element>
+      <!-- The import element allows a protocol description to reference the
+           declarations of another protocol description. -->
+      <xsd:element name="import" type="xsd:string" />
+    </xsd:choice>
+  </xsd:group>
+</xsd:schema>
diff --git a/libxcb/xcb-proto/src/xevie.xml b/libxcb/xcb-proto/src/xevie.xml
new file mode 100644
index 000000000..222b412e4
--- /dev/null
+++ b/libxcb/xcb-proto/src/xevie.xml
@@ -0,0 +1,85 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Josh Triplett.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!-- This file describes version 1 of XEVIE. -->
+<xcb header="xevie" extension-xname="XEVIE" extension-name="Xevie"
+    major-version="1" minor-version="0">
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD16" name="client_major_version" />
+    <field type="CARD16" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="server_major_version" />
+      <field type="CARD16" name="server_minor_version" />
+      <pad bytes="20" />
+    </reply>
+  </request>
+
+  <request name="Start" opcode="1">
+    <field type="CARD32" name="screen" />
+    <reply>
+      <pad bytes="1" />
+      <pad bytes="24" />
+    </reply>
+  </request>
+
+  <request name="End" opcode="2">
+    <field type="CARD32" name="cmap" />
+    <reply>
+      <pad bytes="1" />
+      <pad bytes="24" />
+    </reply>
+  </request>
+
+  <enum name="Datatype">
+    <item name="Unmodified" />
+    <item name="Modified" />
+  </enum>
+
+  <!-- The Send request needs to send an arbitrary Event; this type is used
+       to reserve the necessary structure size. -->
+  <struct name="Event">
+    <pad bytes="32" />
+  </struct>
+
+  <request name="Send" opcode="3">
+    <field type="Event" name="event" />
+    <field type="CARD32" name="data_type" /> <!-- Datatype -->
+    <pad bytes="64" />
+    <reply>
+      <pad bytes="1" />
+      <pad bytes="24" />
+    </reply>
+  </request>
+
+  <request name="SelectInput" opcode="4">
+    <field type="CARD32" name="event_mask" />
+    <reply>
+      <pad bytes="1" />
+      <pad bytes="24" />
+    </reply>
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/xf86dri.xml b/libxcb/xcb-proto/src/xf86dri.xml
new file mode 100644
index 000000000..4527c2bff
--- /dev/null
+++ b/libxcb/xcb-proto/src/xf86dri.xml
@@ -0,0 +1,169 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2005 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xf86dri" extension-xname="XFree86-DRI" extension-name="XF86Dri"
+    major-version="4" minor-version="1">
+
+    <!-- Using http://dri.sourceforge.net/doc/dri_extensions_low_level.txt -->
+
+    <!-- Types -->
+
+    <struct name="DrmClipRect">
+	<field type="INT16" name="x1" />
+	<field type="INT16" name="y1" />
+	<field type="INT16" name="x2" />
+	<field type="INT16" name="x3" />
+    </struct>
+	
+    <!-- Requests -->
+    <request name="QueryVersion" opcode="0">
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD16" name="dri_major_version" />
+	    <field type="CARD16" name="dri_minor_version" />
+	    <field type="CARD32" name="dri_minor_patch" />
+	</reply>
+    </request>
+
+    <request name="QueryDirectRenderingCapable" opcode="1">
+	<field type="CARD32" name="screen" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="BOOL" name="is_capable" />
+	</reply>
+    </request>
+
+    <request name="OpenConnection" opcode="2">
+	<field type="CARD32" name="screen" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="drm_client_key_low" />
+	    <field type="CARD32" name="drm_client_key_high" />
+	    <field type="CARD32" name="sarea_handle_low" />
+	    <field type="CARD32" name="sarea_handle_high" />
+	    <field type="CARD32" name="bus_id_len" />
+	    <pad bytes="12" />
+	    <list type="char" name="bus_id">
+		<fieldref>bus_id_len</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <request name="CloseConnection" opcode="3">
+	<field type="CARD32" name="screen" />
+    </request>
+
+    <request name="GetClientDriverName" opcode="4">
+	<field type="CARD32" name="screen" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="client_driver_major_version" />
+	    <field type="CARD32" name="client_driver_minor_version" />
+	    <field type="CARD32" name="client_driver_patch_version" />
+	    <field type="CARD32" name="client_driver_name_len" />
+	    <pad bytes="8" />
+	    <list type="char" name="client_driver_name">
+		<fieldref>client_driver_name_len</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <request name="CreateContext" opcode="5">
+	<field type="CARD32" name="visual" />
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="context" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="hw_context" />
+	</reply>
+    </request>
+
+    <request name="DestroyContext" opcode="6">
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="context" />
+    </request>
+
+    <request name="CreateDrawable" opcode="7">
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="drawable" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="hw_drawable_handle" />
+	</reply>
+    </request>
+
+    <request name="DestroyDrawable" opcode="8">
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="drawable" />
+    </request>
+
+    <request name="GetDrawableInfo" opcode="9">
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="drawable" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="drawable_table_index" />
+	    <field type="CARD32" name="drawable_table_stamp" />
+	    <field type="INT16" name="drawable_origin_X" />
+	    <field type="INT16" name="drawable_origin_Y" />
+	    <field type="INT16" name="drawable_size_W" />
+	    <field type="INT16" name="drawable_size_H" />
+	    <field type="CARD32" name="num_clip_rects" />
+	    <pad bytes="4" />
+	    <list type="DrmClipRect" name="clip_rects">
+		<fieldref>num_clip_rects</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <request name="GetDeviceInfo" opcode="10">
+	<field type="CARD32" name="screen" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="framebuffer_handle_low" />
+	    <field type="CARD32" name="framebuffer_handle_high" />
+	    <field type="CARD32" name="framebuffer_origin_offset" />
+	    <field type="CARD32" name="framebuffer_size" />
+	    <field type="CARD32" name="framebuffer_stride" />
+	    <field type="CARD32" name="device_private_size" />
+	    <list type="CARD32" name="device_private">
+		<fieldref>device_private_size</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- Not in this doc, but specified in Mesa/src/glx/x11/xf86dri.h -->
+    <request name="AuthConnection" opcode="11">
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="magic" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="authenticated" />
+	</reply>
+    </request>	    
+</xcb>
diff --git a/libxcb/xcb-proto/src/xfixes.xml b/libxcb/xcb-proto/src/xfixes.xml
new file mode 100644
index 000000000..f6b062336
--- /dev/null
+++ b/libxcb/xcb-proto/src/xfixes.xml
@@ -0,0 +1,331 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2004 Josh Triplett.  All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<!-- This file describes version 4 of XFixes. -->
+<xcb header="xfixes" extension-xname="XFIXES" extension-name="XFixes"
+    major-version="4" minor-version="0">
+  <import>xproto</import>
+  <import>render</import>
+  <import>shape</import>
+
+  <!-- Version 1 -->
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD32" name="client_major_version" />
+    <field type="CARD32" name="client_minor_version" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="major_version" />
+      <field type="CARD32" name="minor_version" />
+      <pad bytes="16" />
+    </reply>
+  </request>
+
+  <enum name="SaveSetMode">
+    <item name="Insert" />
+    <item name="Delete" />
+  </enum>
+
+  <enum name="SaveSetTarget">
+    <item name="Nearest" />
+    <item name="Root" />
+  </enum>
+
+  <enum name="SaveSetMapping">
+    <item name="Map" />
+    <item name="Unmap" />
+  </enum>
+
+  <request name="ChangeSaveSet" opcode="1">
+    <field type="BYTE" name="mode"   enum="SaveSetMode" />
+    <field type="BYTE" name="target" enum="SaveSetTarget" />
+    <field type="BYTE" name="map"    enum="SaveSetMapping" />
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <enum name="SelectionEvent">
+    <item name="SetSelectionOwner" />
+    <item name="SelectionWindowDestroy" />
+    <item name="SelectionClientClose" />
+  </enum>
+
+  <enum name="SelectionEventMask">
+    <item name="SetSelectionOwner">     <bit>0</bit></item>
+    <item name="SelectionWindowDestroy"><bit>1</bit></item>
+    <item name="SelectionClientClose">  <bit>2</bit></item>
+  </enum>
+
+  <event name="SelectionNotify" number="0">
+    <field type="CARD8"     name="subtype" enum="SelectionEvent" />
+    <field type="WINDOW"    name="window" />
+    <field type="WINDOW"    name="owner" />
+    <field type="ATOM"      name="selection" />
+    <field type="TIMESTAMP" name="timestamp" />
+    <field type="TIMESTAMP" name="selection_timestamp" />
+    <pad bytes="8" />
+  </event>
+
+  <request name="SelectSelectionInput" opcode="2">
+    <field type="WINDOW" name="window" />
+    <field type="ATOM"   name="selection" />
+    <field type="CARD32" name="event_mask" mask="SelectionEventMask" />
+  </request>
+
+  <enum name="CursorNotify">
+    <item name="DisplayCursor" />
+  </enum>
+
+  <enum name="CursorNotifyMask">
+    <item name="DisplayCursor"><bit>0</bit></item>
+  </enum>
+
+  <event name="CursorNotify" number="1">
+    <field type="CARD8"     name="subtype" enum="CursorNotify" />
+    <field type="WINDOW"    name="window" />
+    <field type="CARD32"    name="cursor_serial" />
+    <field type="TIMESTAMP" name="timestamp" />
+    <field type="ATOM"      name="name" altenum="Atom" /> <!-- Added in version 2 -->
+    <pad bytes="12" />
+  </event>
+
+  <request name="SelectCursorInput" opcode="3">
+    <field type="WINDOW" name="window" />
+    <field type="CARD32" name="event_mask" mask="CursorNotifyMask" />
+  </request>
+
+  <request name="GetCursorImage" opcode="4">
+    <reply>
+      <pad bytes="1" />
+      <field type="INT16"  name="x" />
+      <field type="INT16"  name="y" />
+      <field type="CARD16" name="width" />
+      <field type="CARD16" name="height" />
+      <field type="CARD16" name="xhot" />
+      <field type="CARD16" name="yhot" />
+      <field type="CARD32" name="cursor_serial" />
+      <pad bytes="8" />
+      <list  type="CARD32" name="cursor_image">
+        <op op="*">
+          <fieldref>width</fieldref>
+          <fieldref>height</fieldref>
+        </op>
+      </list>
+    </reply>
+  </request>
+
+  <!-- Version 2 -->
+
+  <xidtype name="REGION" />
+
+  <error name="BadRegion" number="0" />
+
+  <enum name="Region">
+    <item name="None" />
+  </enum>
+
+  <request name="CreateRegion" opcode="5">
+    <field type="REGION"    name="region" />
+    <list  type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="CreateRegionFromBitmap" opcode="6">
+    <field type="REGION" name="region" />
+    <field type="PIXMAP" name="bitmap" />
+  </request>
+
+  <request name="CreateRegionFromWindow" opcode="7">
+    <field type="REGION"     name="region" />
+    <field type="WINDOW"     name="window" />
+    <field type="shape:KIND" name="kind"   enum="SK" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="CreateRegionFromGC" opcode="8">
+    <field type="REGION"   name="region" />
+    <field type="GCONTEXT" name="gc" />
+  </request>
+
+  <request name="CreateRegionFromPicture" opcode="9">
+    <field type="REGION"  name="region" />
+    <field type="PICTURE" name="picture" />
+  </request>
+
+  <request name="DestroyRegion" opcode="10">
+    <field type="REGION"  name="region" />
+  </request>
+
+  <request name="SetRegion" opcode="11">
+    <field type="REGION"    name="region" />
+    <list  type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="CopyRegion" opcode="12">
+    <field type="REGION" name="source" />
+    <field type="REGION" name="destination" />
+  </request>
+
+  <request name="UnionRegion" opcode="13">
+    <field type="REGION" name="source1" />
+    <field type="REGION" name="source2" />
+    <field type="REGION" name="destination" />
+  </request>
+
+  <request name="IntersectRegion" opcode="14">
+    <field type="REGION" name="source1" />
+    <field type="REGION" name="source2" />
+    <field type="REGION" name="destination" />
+  </request>
+
+  <request name="SubtractRegion" opcode="15">
+    <field type="REGION" name="source1" />
+    <field type="REGION" name="source2" />
+    <field type="REGION" name="destination" />
+  </request>
+
+  <request name="InvertRegion" opcode="16">
+    <field type="REGION"    name="source" />
+    <field type="RECTANGLE" name="bounds" />
+    <field type="REGION"    name="destination" />
+  </request>
+
+  <request name="TranslateRegion" opcode="17">
+    <field type="REGION" name="region" />
+    <field type="INT16"  name="dx" />
+    <field type="INT16"  name="dy" />
+  </request>
+
+  <request name="RegionExtents" opcode="18"> 	
+    <field type="REGION" name="source" />
+    <field type="REGION" name="destination" />
+  </request>
+
+  <request name="FetchRegion" opcode="19">
+    <field type="REGION" name="region" />
+    <reply>
+      <pad bytes="1" />
+      <field type="RECTANGLE" name="extents" />
+      <pad bytes="16" />
+      <list  type="RECTANGLE" name="rectangles">
+		<fieldref>length</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetGCClipRegion" opcode="20">
+    <field type="GCONTEXT" name="gc" />
+    <field type="REGION"   name="region" altenum="Region" />
+    <field type="INT16"    name="x_origin" />
+    <field type="INT16"    name="y_origin" />
+  </request>
+
+  <request name="SetWindowShapeRegion" opcode="21">
+    <field type="WINDOW"     name="dest" />
+    <field type="shape:KIND" name="dest_kind" enum="SK" />
+    <pad bytes="3" />
+    <field type="INT16"      name="x_offset" />
+    <field type="INT16"      name="y_offset" />
+    <field type="REGION"     name="region" altenum="Region" />
+  </request>
+
+  <request name="SetPictureClipRegion" opcode="22">
+    <field type="PICTURE" name="picture" />
+    <field type="REGION"  name="region" altenum="Region" />
+    <field type="INT16"   name="x_origin" />
+    <field type="INT16"   name="y_origin" />
+  </request>
+
+  <request name="SetCursorName" opcode="23">
+    <field type="CURSOR" name="cursor" />
+    <field type="CARD16" name="nbytes" />
+    <pad bytes="2" />
+    <list  type="char"   name="name"><fieldref>nbytes</fieldref></list>
+  </request>
+
+  <request name="GetCursorName" opcode="24">
+    <field type="CURSOR" name="cursor" />
+    <reply>
+      <pad bytes="1" />
+      <field type="ATOM"   name="atom" altenum="Atom" />
+      <field type="CARD16" name="nbytes" />
+      <pad bytes="18" />
+      <list  type="char"   name="name"><fieldref>nbytes</fieldref></list>
+    </reply>
+  </request>
+
+  <request name="GetCursorImageAndName" opcode="25">
+    <reply>
+      <pad bytes="1" />
+      <field type="INT16"  name="x" />
+      <field type="INT16"  name="y" />
+      <field type="CARD16" name="width" />
+      <field type="CARD16" name="height" />
+      <field type="CARD16" name="xhot" />
+      <field type="CARD16" name="yhot" />
+      <field type="CARD32" name="cursor_serial" />
+      <field type="ATOM"   name="cursor_atom" altenum="Atom" />
+      <field type="CARD16" name="nbytes" />
+      <pad bytes="2" />
+      <list  type="char"   name="name"><fieldref>nbytes</fieldref></list>
+      <list  type="CARD32" name="cursor_image">
+        <op op="*">
+          <fieldref>width</fieldref>
+          <fieldref>height</fieldref>
+        </op>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ChangeCursor" opcode="26">
+    <field type="CURSOR" name="source" />
+    <field type="CURSOR" name="destination" />
+  </request>
+
+  <request name="ChangeCursorByName" opcode="27">
+    <field type="CURSOR" name="src" />
+    <field type="CARD16" name="nbytes" />
+    <pad bytes="2" />
+    <list  type="char"   name="name"><fieldref>nbytes</fieldref></list>
+  </request>
+
+  <!-- Version 3 -->
+  <request name="ExpandRegion" opcode="28">
+    <field type="REGION" name="source" />
+    <field type="REGION" name="destination" />
+    <field type="CARD16" name="left" />
+    <field type="CARD16" name="right" />
+    <field type="CARD16" name="top" />
+    <field type="CARD16" name="bottom" />
+  </request>
+  
+  <!-- Version 4 -->
+  <request name="HideCursor" opcode="29">
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="ShowCursor" opcode="30">
+    <field type="WINDOW" name="window" />
+  </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/xinerama.xml b/libxcb/xcb-proto/src/xinerama.xml
new file mode 100644
index 000000000..b2747eeab
--- /dev/null
+++ b/libxcb/xcb-proto/src/xinerama.xml
@@ -0,0 +1,99 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xinerama" extension-xname="XINERAMA" extension-name="Xinerama"
+    major-version="1" minor-version="1">
+
+    <!-- Version 1.1 -->
+
+    <import>xproto</import>
+
+    <struct name="ScreenInfo">
+        <field type="INT16" name="x_org" />
+        <field type="INT16" name="y_org" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+    </struct>
+
+    <request name="QueryVersion" opcode="0">
+        <field type="CARD8" name="major" />
+        <field type="CARD8" name="minor" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="major" />
+            <field type="CARD16" name="minor" />
+        </reply>
+    </request>
+
+    <request name="GetState" opcode="1">
+        <field type="WINDOW" name="window" />
+        <reply>
+            <field type="BYTE" name="state" />
+            <field type="WINDOW" name="window" />
+        </reply>
+    </request>
+
+    <request name="GetScreenCount" opcode="2">
+        <field type="WINDOW" name="window" />
+        <reply>
+            <field type="BYTE" name="screen_count" />
+            <field type="WINDOW" name="window" />
+        </reply>
+    </request>
+
+    <request name="GetScreenSize" opcode="3">
+        <field type="WINDOW" name="window" />
+        <field type="CARD32" name="screen" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="width" />
+            <field type="CARD32" name="height" />
+            <field type="WINDOW" name="window" />
+            <field type="CARD32" name="screen" />
+        </reply>
+    </request>
+
+    <request name="IsActive" opcode="4">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="state" />
+        </reply>
+    </request>
+
+    <request name="QueryScreens" opcode="5">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="number" />
+            <pad bytes="20" />
+            <list type="ScreenInfo" name="screen_info">
+                <fieldref>number</fieldref>
+            </list>
+        </reply>
+    </request>
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/xinput.xml b/libxcb/xcb-proto/src/xinput.xml
new file mode 100644
index 000000000..80416fe3f
--- /dev/null
+++ b/libxcb/xcb-proto/src/xinput.xml
@@ -0,0 +1,1020 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Peter Hutterer 
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<!-- Spec: http://refspecs.freestandards.org/X11/Xinput.pdf -->
+
+<xcb header="xinput" extension-xname="XInputExtension" extension-name="Input"
+     major-version="1" minor-version="4">
+    <import>xproto</import>
+
+    <typedef oldname="CARD8" newname="KeyCode" />
+    <typedef oldname="CARD32" newname="EventClass" />
+
+    <enum name="ValuatorMode">
+	<item name="Relative"> <value>0</value></item>
+	<item name="Absolute"> <value>1</value></item>
+    </enum>
+
+    <enum name="PropagateMode">
+	<item name="AddToList"> <value>0</value></item>
+	<item name="DeleteFromList"> <value>1</value></item>
+    </enum>
+
+    <!-- GetExtensionVersion -->
+
+    <request name="GetExtensionVersion" opcode="1">
+	<field type="CARD16" name="name_len" />
+	<pad bytes="2" />
+	<list type="char" name="name">
+	    <fieldref>name_len</fieldref>
+	</list>
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD16" name="server_major" />
+	    <field type="CARD16" name="server_minor" />
+	    <field type="BOOL" name="present" />
+	    <pad bytes="19" />
+	</reply>
+    </request>
+
+    <!-- ListInputDevices -->
+
+    <enum name="DeviceUse">
+	<item name="IsXPointer"><value>0</value></item>
+	<item name="IsXKeyboard"><value>1</value></item>
+	<item name="IsXExtensionDevice"><value>2</value></item>
+	<item name="IsXExtensionKeyboard"><value>3</value></item>
+	<item name="IsXExtensionPointer"><value>4</value></item>
+    </enum>
+
+    <struct name="DeviceInfo">
+	<field type="ATOM" name="device_type" />
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="num_class_info" />
+	<field type="CARD8" name="device_use" enum="DeviceUse" />
+	<pad bytes="1" />
+    </struct>
+
+    <request name="ListInputDevices" opcode="2">
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="devices_len" />
+	    <pad bytes="23" />
+	    <list type="DeviceInfo" name="devices">
+		<fieldref>devices_len</fieldref>
+	    </list>
+	    <!-- Uninterpreted: list of deviceinfo structs of 3 the subtypes -->
+	    <!-- Uninterpreted: list of null-terminated strings -->
+	</reply>
+    </request>
+
+    <enum name="InputClass">
+	<item name="Key"><value>0</value></item>
+	<item name="Button"><value>1</value></item>
+	<item name="Valuator"><value>2</value></item>
+	<item name="Feedback"><value>3</value></item>
+	<item name="Proximity"><value>4</value></item>
+	<item name="Focus"><value>5</value></item>
+	<item name="Other"><value>6</value></item>
+    </enum>
+
+    <struct name="InputInfo">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+    </struct>
+
+    <struct name="KeyInfo">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="KeyCode" name="min_keycode" />
+	<field type="KeyCode" name="max_keycode" />
+	<field type="CARD16" name="num_keys" />
+	<pad bytes="2" />
+    </struct>
+
+    <struct name="ButtonInfo">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD16" name="num_buttons" />
+    </struct>
+
+    <struct name="AxisInfo">
+	<field type="CARD32" name="resolution" />
+	<field type="INT32" name="minimum" />
+	<field type="INT32" name="maximum" />
+    </struct>
+
+    <struct name="ValuatorInfo">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD8" name="axes_len" />
+	<field type="CARD8" name="mode" enum="ValuatorMode" />
+	<field type="CARD32" name="motion_size" />
+	<list type="AxisInfo" name="axes">
+	    <fieldref>axes_len</fieldref>
+	</list>
+    </struct>
+
+    <!-- OpenDevice -->
+
+    <struct name="InputClassInfo">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="event_type_base" />
+    </struct>
+
+    <request name="OpenDevice" opcode="3">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="num_classes" />
+	    <pad bytes="23" />
+	    <list type="InputClassInfo" name="class_info">
+		<fieldref>num_classes</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- CloseDevice -->
+
+    <request name="CloseDevice" opcode="4">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+    </request>
+
+    <!-- SetDeviceMode -->
+
+    <request name="SetDeviceMode" opcode="5">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="mode" enum="ValuatorMode" />
+	<pad bytes="2" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" altenum="GrabStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- SelectExtensionEvent -->
+
+    <request name="SelectExtensionEvent" opcode="6">
+	<field type="WINDOW" name="window" />
+	<field type="CARD16" name="num_classes" />
+	<pad bytes="2" />
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+    </request>
+
+    <!-- GetSelectedExtensionEvents -->
+
+    <request name="GetSelectedExtensionEvents" opcode="7">
+	<field type="WINDOW" name="window" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD16" name="num_this_classes" />
+	    <field type="CARD16" name="num_all_classes" />
+	    <pad bytes="20" />
+	    <list type="EventClass" name="this_classes">
+		<fieldref>num_this_classes</fieldref>
+	    </list>
+	    <list type="EventClass" name="all_classes">
+		<fieldref>num_all_classes</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- ChangeDeviceDontPropagateList -->
+
+    <request name="ChangeDeviceDontPropagateList" opcode="8">
+	<field type="WINDOW" name="window" />
+	<field type="CARD16" name="num_classes" />
+	<field type="CARD8" name="mode" enum="PropagateMode" />
+	<pad bytes="1" />
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+    </request>
+
+    <!-- GetDeviceDontPropagateList -->
+
+    <request name="GetDeviceDontPropagateList" opcode="9">
+	<field type="WINDOW" name="window" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD16" name="num_classes" />
+	    <pad bytes="22" />
+	    <list type="EventClass" name="classes">
+		<fieldref>num_classes</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- GetDeviceMotionEvents -->
+
+    <request name="GetDeviceMotionEvents" opcode="10">
+	<field type="TIMESTAMP" name="start" />
+	<field type="TIMESTAMP" name="stop" altenum="Time" />
+	<field type="CARD8" name="device_id" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD32" name="num_coords" />
+	    <field type="CARD8" name="num_axes" />
+	    <field type="CARD8" name="device_mode" enum="ValuatorMode" />
+	    <pad bytes="18" />
+	    <!-- Uninterpreted: list of DeviceTimeCoord structures -->
+	</reply>
+    </request>
+
+    <struct name="DeviceTimeCoord">
+	<field type="TIMESTAMP" name="time" />
+	<!-- Uninterpreted: list of CARD16 -->
+    </struct>
+
+    <!-- ChangeKeyboardDevice -->
+    <request name="ChangeKeyboardDevice" opcode="11">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" altenum="GrabStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- ChangePointerDevice -->
+
+    <request name="ChangePointerDevice" opcode="12">
+	<field type="CARD8" name="x_axis" />
+	<field type="CARD8" name="y_axis" />
+	<field type="CARD8" name="device_id" />
+	<pad bytes="1" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" altenum="GrabStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- GrabDevice -->
+
+    <request name="GrabDevice" opcode="13">
+	<field type="WINDOW" name="grab_window" />
+	<field type="TIMESTAMP" name="time" altenum="Time" />
+	<field type="CARD16" name="num_classes" />
+	<field type="CARD8" name="this_device_mode" enum="GrabMode" />
+	<field type="CARD8" name="other_device_mode" enum="GrabMode" />
+	<field type="BOOL" name="owner_events" />
+	<field type="CARD8" name="device_id" />
+	<pad bytes="2" />
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" enum="GrabStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- UngrabDevice -->
+
+    <request name="UngrabDevice" opcode="14">
+	<field type="TIMESTAMP" name="time" altenum="Time" />
+	<field type="CARD8" name="device_id" />
+    </request>
+
+    <!-- GrabDeviceKey -->
+
+    <request name="GrabDeviceKey" opcode="15">
+	<field type="WINDOW" name="grab_window" />
+	<field type="CARD16" name="num_classes" />
+	<field type="CARD16" name="modifiers" mask="ModMask" />
+	<field type="CARD8" name="modifier_device" />
+	<field type="CARD8" name="grabbed_device" />
+	<field type="CARD8" name="key" altenum="Grab" />
+	<field type="CARD8" name="this_device_mode" enum="GrabMode" />
+	<field type="CARD8" name="other_device_mode" enum="GrabMode" />
+	<field type="BOOL" name="owner_events" />
+	<pad bytes="2" />
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+    </request>
+
+    <!-- UngrabDeviceKey -->
+
+    <request name="UngrabDeviceKey" opcode="16">
+	<field type="WINDOW" name="grabWindow" />
+	<field type="CARD16" name="modifiers" mask="ModMask" />
+	<field type="CARD8" name="modifier_device" />
+	<field type="CARD8" name="key" altenum="Grab" />
+	<field type="CARD8" name="grabbed_device" />
+    </request>
+
+    <!-- GrabDeviceButton -->
+
+    <request name="GrabDeviceButton" opcode="17">
+	<field type="WINDOW" name="grab_window" />
+	<field type="CARD8" name="grabbed_device" />
+	<field type="CARD8" name="modifier_device" />
+	<field type="CARD16" name="num_classes" />
+	<field type="CARD16" name="modifiers" mask="ModMask" />
+	<field type="CARD8" name="this_device_mode" enum="GrabMode" />
+	<field type="CARD8" name="other_device_mode" enum="GrabMode" />
+	<field type="CARD8" name="button" altenum="Grab" />
+	<field type="CARD8" name="owner_events" />
+	<pad bytes="2" />
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+    </request>
+
+    <!-- UngrabDeviceButton -->
+
+    <request name="UngrabDeviceButton" opcode="18">
+	<field type="WINDOW" name="grab_window" />
+	<field type="CARD16" name="modifiers" mask="ModMask" />
+	<field type="CARD8" name="modifier_device" />
+	<field type="CARD8" name="button" altenum="Grab" />
+	<field type="CARD8" name="grabbed_device" />
+    </request>
+
+    <!-- AllowDeviceEvents -->
+
+    <enum name="DeviceInputMode">
+	<item name="AsyncThisDevice" />
+	<item name="SyncThisDevice" />
+	<item name="ReplayThisDevice" />
+	<item name="AsyncOtherDevices" />
+	<item name="AsyncAll" />
+	<item name="SyncAll" />
+    </enum>
+
+    <request name="AllowDeviceEvents" opcode="19">
+	<field type="TIMESTAMP" name="time" altenum="Time" />
+	<field type="CARD8" name="mode" enum="DeviceInputMode" />
+	<field type="CARD8" name="device_id" />
+    </request>
+
+    <!-- GetDeviceFocus -->
+
+    <request name="GetDeviceFocus" opcode="20">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="WINDOW" name="focus" altenum="InputFocus" />
+	    <field type="TIMESTAMP" name="time" />
+	    <field type="CARD8" name="revert_to" enum="InputFocus" />
+	    <pad bytes="15" />
+	</reply>
+    </request>
+
+    <!-- SetDeviceFocus -->
+
+    <request name="SetDeviceFocus" opcode="21">
+	<field type="WINDOW" name="focus" altenum="InputFocus" />
+	<field type="TIMESTAMP" name="time" altenum="Time" />
+	<field type="CARD8" name="revert_to" enum="InputFocus" />
+	<field type="CARD8" name="device_id" />
+    </request>
+
+    <!-- GetFeedbackControl -->
+
+    <request name="GetFeedbackControl" opcode="22">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD16" name="num_feedback" />
+	    <pad bytes="22" />
+	    <!-- Uninterpreted: list of FeedbackState structures -->
+	</reply>
+    </request>
+
+    <enum name="FeedbackClass">
+	<item name="Keyboard" />
+	<item name="Pointer" />
+	<item name="String" />
+	<item name="Integer" />
+	<item name="Led" />
+	<item name="Bell" />
+    </enum>
+
+    <struct name="FeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+    </struct>
+    
+    <struct name="KbdFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD16" name="pitch" />
+	<field type="CARD16" name="duration" />
+	<field type="CARD32" name="led_mask" />
+	<field type="CARD32" name="led_values" />
+	<field type="BOOL" name="global_auto_repeat" />
+	<field type="CARD8" name="click" />
+	<field type="CARD8" name="percent" />
+	<pad bytes="1" />
+	<list type="CARD8" name="auto_repeats"><value>32</value></list>
+    </struct>
+
+    <struct name="PtrFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<pad bytes="2" />
+	<field type="CARD16" name="accel_num" />
+	<field type="CARD16" name="accel_denom" />
+	<field type="CARD16" name="threshold" />
+    </struct>
+
+    <struct name="IntegerFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="resolution" />
+	<field type="INT32" name="min_value" />
+	<field type="INT32" name="max_value" />
+    </struct>
+
+    <struct name="StringFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD16" name="max_symbols" />
+	<field type="CARD16" name="num_keysyms" />
+	<list type="KEYSYM" name="keysyms">
+	    <fieldref>num_keysyms</fieldref>
+	</list>
+    </struct>
+
+    <struct name="BellFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="percent" />
+	<pad bytes="3" />
+	<field type="CARD16" name="pitch" />
+	<field type="CARD16" name="duration" />
+    </struct>
+
+    <struct name="LedFeedbackState">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="led_mask" />
+	<field type="CARD32" name="led_values" />
+    </struct>
+
+    <!-- ChangeFeedbackControl
+
+    <request name="ChangeFeedbackControl" opcode="23">
+	<field type="CARD32" name="mask" />
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="feedback_id" />
+	Uninterpreted: list of FeedbackCtl structures
+    </request>
+
+    -->
+
+    <struct name="FeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+    </struct>
+
+    <struct name="KbdFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="KeyCode" name="key" />
+	<field type="CARD8" name="auto_repeat_mode" />
+	<field type="INT8" name="key_click_percent" />
+	<field type="INT8" name="bell_percent" />
+	<field type="INT16" name="bell_pitch" />
+	<field type="INT16" name="bell_duration" />
+	<field type="CARD32" name="led_mask" />
+	<field type="CARD32" name="led_values" />
+    </struct>
+
+    <struct name="PtrFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<pad bytes="2" />
+	<field type="INT16" name="num" />
+	<field type="INT16" name="denom" />
+	<field type="INT16" name="threshold" />
+    </struct>
+
+    <struct name="IntegerFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="INT32" name="int_to_display" />
+    </struct>
+
+    <struct name="StringFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<pad bytes="2" />
+	<field type="CARD16" name="num_keysyms" />
+	<list type="KEYSYM" name="keysyms">
+	    <fieldref>num_keysyms</fieldref>
+	</list>
+    </struct>
+
+    <struct name="BellFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="INT8" name="percent" />
+	<pad bytes="3" />
+	<field type="INT16" name="pitch" />
+	<field type="INT16" name="duration" />
+    </struct>
+
+    <struct name="LedFeedbackCtl">
+	<field type="CARD8" name="class_id" enum="FeedbackClass" />
+	<field type="CARD8" name="id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="led_mask" />
+	<field type="CARD32" name="led_values" />
+    </struct>
+
+    <!-- GetDeviceKeyMapping -->
+
+    <request name="GetDeviceKeyMapping" opcode="24">
+	<field type="CARD8" name="device_id" />
+	<field type="KeyCode" name="first_keycode" />
+	<field type="CARD8" name="count" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="keysyms_per_keycode" />
+	    <pad bytes="23" />
+	    <list type="KEYSYM" name="keysyms">
+		<fieldref>length</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- ChangeDeviceKeyMapping -->
+
+    <request name="ChangeDeviceKeyMapping" opcode="25">
+	<field type="CARD8" name="device_id" />
+	<field type="KeyCode" name="first_keycode" />
+	<field type="CARD8" name="keysyms_per_keycode" />
+	<field type="CARD8" name="keycode_count" />
+	<list type="KEYSYM" name="keysyms">
+	    <op op="*">
+		<fieldref>keycode_count</fieldref>
+		<fieldref>keysyms_per_keycode</fieldref>
+	    </op>
+	</list>
+    </request>
+
+    <!-- GetDeviceModifierMapping -->
+
+    <request name="GetDeviceModifierMapping" opcode="26">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="keycodes_per_modifier" />
+	    <pad bytes="23" />
+	    <list type="CARD8" name="keymaps">
+		<op op="*">
+		    <fieldref>keycodes_per_modifier</fieldref>
+		    <value>8</value>
+		</op>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- SetDeviceModifierMapping -->
+
+    <request name="SetDeviceModifierMapping" opcode="27">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="keycodes_per_modifier" />
+	<pad bytes="1" />
+	<list type="CARD8" name="keymaps">
+	    <op op="*">
+		<fieldref>keycodes_per_modifier</fieldref>
+		<value>8</value>
+	    </op>
+	</list>
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" enum="MappingStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- GetDeviceButtonMapping -->
+
+    <request name="GetDeviceButtonMapping" opcode="28">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="map_size" />
+	    <pad bytes="23" />
+	    <list type="CARD8" name="map">
+		<fieldref>map_size</fieldref>
+	    </list>
+	</reply>
+    </request>
+
+    <!-- SetDeviceButtonMapping -->
+
+    <request name="SetDeviceButtonMapping" opcode="29">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="map_size" />
+	<pad bytes="2" />
+	<list type="CARD8" name="map">
+	    <fieldref>map_size</fieldref>
+	</list>
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" enum="MappingStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- QueryDeviceState -->
+
+    <request name="QueryDeviceState" opcode="30">
+	<field type="CARD8" name="device_id" />
+	<pad bytes="3" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="num_classes" />
+	    <pad bytes="23" />
+	    <!-- Uninterpreted: list of InputState structures -->
+	</reply>
+    </request>
+
+    <struct name="InputState">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD8" name="num_items" />
+    </struct>
+
+    <struct name="KeyState">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD8" name="num_keys" />
+	<pad bytes="1" />
+	<list type="CARD8" name="keys">
+	    <value>32</value>
+	</list>
+    </struct>
+
+    <struct name="ButtonState">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD8" name="num_buttons" />
+	<pad bytes="1" />
+	<list type="CARD8" name="buttons">
+	    <value>32</value>
+	</list>
+    </struct>
+
+    <struct name="ValuatorState">
+	<field type="CARD8" name="class_id" enum="InputClass" />
+	<field type="CARD8" name="len" />
+	<field type="CARD8" name="num_valuators" />
+	<field type="CARD8" name="mode" />
+	<list type="CARD32" name="valuators">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+    </struct>
+
+    <!-- SendExtensionEvent -->
+
+    <request name="SendExtensionEvent" opcode="31">
+	<field type="WINDOW" name="destination" />
+	<field type="CARD8" name="device_id" />
+	<field type="BOOL" name="propagate" />
+	<field type="CARD16" name="num_classes" />
+	<field type="CARD8" name="num_events" />
+	<pad bytes="3" />
+	<list type="char" name="events">
+	    <op op="*">
+		<fieldref>num_events</fieldref>
+		<value>32</value>
+	    </op>
+	</list>
+	<list type="EventClass" name="classes">
+	    <fieldref>num_classes</fieldref>
+	</list>
+    </request>
+
+    <!-- DeviceBell -->
+
+    <request name="DeviceBell" opcode="32">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="feedback_id" />
+	<field type="CARD8" name="feedback_class" />
+	<field type="INT8" name="percent" />
+    </request>
+
+    <!-- SetDeviceValuators -->
+
+    <request name="SetDeviceValuators" opcode="33">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD8" name="first_valuator" />
+	<field type="CARD8" name="num_valuators" />
+	<pad bytes="1" />
+	<list type="INT32" name="valuators">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" enum="GrabStatus" />
+	    <pad bytes="23" />
+	</reply>
+    </request>
+
+    <!-- GetDeviceControl -->
+
+    <request name="GetDeviceControl" opcode="34">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD8" name="device_id" />
+	<pad bytes="1" />
+	<reply>
+	    <pad bytes="1" />
+	    <field type="CARD8" name="status" altenum="GrabStatus" />
+	    <pad bytes="23" />
+	    <!-- Uninterpreted: list of DeviceState structures -->
+	</reply>
+    </request>
+
+    <struct name="DeviceState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+    </struct>
+
+    <struct name="DeviceResolutionState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="num_valuators" />
+	<list type="CARD32" name="resolution_values">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+	<list type="CARD32" name="resolution_min">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+	<list type="CARD32" name="resolution_max">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+    </struct>
+
+    <struct name="DeviceAbsCalibState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="INT32" name="min_x" />
+	<field type="INT32" name="max_x" />
+	<field type="INT32" name="min_y" />
+	<field type="INT32" name="max_y" />
+	<field type="CARD32" name="flip_x" />
+	<field type="CARD32" name="flip_y" />
+	<field type="CARD32" name="rotation" />
+	<field type="CARD32" name="button_threshold" />
+    </struct>
+
+    <struct name="DeviceAbsAreaState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="offset_x" />
+	<field type="CARD32" name="offset_y" />
+	<field type="CARD32" name="width" />
+	<field type="CARD32" name="height" />
+	<field type="CARD32" name="screen" />
+	<field type="CARD32" name="following" />
+    </struct>
+
+    <struct name="DeviceCoreState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="status" />
+	<field type="CARD8" name="iscore" />
+	<pad bytes="2" />
+    </struct>
+
+    <struct name="DeviceEnableState">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="enable" />
+	<pad bytes="3" />
+    </struct>
+
+    <!-- ChangeDeviceControl
+
+    <request name="ChangeDeviceControl" opcode="35">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD8" name="device_id" />
+	<pad bytes="1" />
+	Uninterpreted: list of DeviceCtl structures
+	<reply>
+            <pad byte="1" />
+            <field type="CARD8" name="status" altenum="GrabStatus" />
+            <pad bytes="23" />
+	</reply>
+    </request>
+
+    -->
+
+    <struct name="DeviceCtl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+    </struct>
+
+    <struct name="DeviceResolutionCtl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="first_valuator" />
+	<field type="CARD8" name="num_valuators" />
+	<list type="CARD32" name="resolution_values">
+	    <fieldref>num_valuators</fieldref>
+	</list>
+    </struct>
+
+    <struct name="DeviceAbsCalibCtl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="INT32" name="min_x" />
+	<field type="INT32" name="max_x" />
+	<field type="INT32" name="min_y" />
+	<field type="INT32" name="max_y" />
+	<field type="CARD32" name="flip_x" />
+	<field type="CARD32" name="flip_y" />
+	<field type="CARD32" name="rotation" />
+	<field type="CARD32" name="button_threshold" />
+    </struct>
+
+    <struct name="DeviceAbsAreaCtrl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD32" name="offset_x" />
+	<field type="CARD32" name="offset_y" />
+	<field type="INT32" name="width" />
+	<field type="INT32" name="height" />
+	<field type="INT32" name="screen" />
+	<field type="CARD32" name="following" />
+    </struct>
+
+    <struct name="DeviceCoreCtrl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="status" />
+	<pad bytes="3" />
+    </struct>
+
+    <struct name="DeviceEnableCtrl">
+	<field type="CARD16" name="control_id" />
+	<field type="CARD16" name="len" />
+	<field type="CARD8" name="enable" />
+	<pad bytes="3" />
+    </struct>
+
+    <!-- EVENTS --> 
+
+    <event name="DeviceValuator" number="0">
+	<field type="CARD8" name="device_id" />
+	<field type="CARD16" name="device_state" />
+	<field type="CARD8" name="num_valuators" />
+	<field type="CARD8" name="first_valuator" />
+	<list type="INT32" name="valuators"><value>6</value></list>
+    </event>
+
+    <event name="DeviceKeyPress" number="1">
+	<field type="BYTE" name="detail" />
+	<field type="TIMESTAMP" name="time" />
+	<field type="WINDOW" name="root" />
+	<field type="WINDOW" name="event" />
+	<field type="WINDOW" name="child" altenum="Window" />
+	<field type="INT16" name="root_x" />
+	<field type="INT16" name="root_y" />
+	<field type="INT16" name="event_x" />
+	<field type="INT16" name="event_y" />
+	<field type="CARD16" name="state" />
+	<field type="BOOL" name="same_screen" />
+	<field type="CARD8" name="device_id" />
+    </event>
+
+    <eventcopy name="DeviceKeyRelease" number="2" ref="DeviceKeyPress" />
+    <eventcopy name="DeviceButtonPress" number="3" ref="DeviceKeyPress" />
+    <eventcopy name="DeviceButtonRelease" number="4" ref="DeviceKeyPress" />
+    <eventcopy name="DeviceMotionNotify" number="5" ref="DeviceKeyPress" />
+    <eventcopy name="ProximityIn" number="8" ref="DeviceKeyPress" />
+    <eventcopy name="ProximityOut" number="9" ref="DeviceKeyPress" />
+
+    <event name="FocusIn" number="6">
+	<field type="BYTE" name="detail" enum="NotifyDetail" />
+	<field type="TIMESTAMP" name="time" />
+	<field type="WINDOW" name="window" />
+	<field type="BYTE" name="mode" enum="NotifyMode" />
+	<field type="CARD8" name="device_id" />
+	<pad bytes="18" />
+    </event>
+
+    <eventcopy name="FocusOut" number="7" ref="FocusIn" />
+
+    <event name="DeviceStateNotify" number="10">
+	<field type="BYTE" name="device_id" />
+	<field type="TIMESTAMP" name="time" />
+	<field type="CARD8" name="num_keys" />
+	<field type="CARD8" name="num_buttons" />
+	<field type="CARD8" name="num_valuators" />
+	<field type="CARD8" name="classes_reported" />
+	<list type="CARD8" name="buttons">
+            <value>4</value>
+	</list>
+	<list type="CARD8" name="keys">
+            <value>4</value>
+	</list>
+	<list type="CARD32" name="valuators">
+	    <value>3</value>
+	</list>
+    </event>
+
+    <event name="DeviceMappingNotify" number="11">
+	<field type="BYTE" name="device_id" />
+	<field type="CARD8" name="request" />
+	<field type="KeyCode" name="first_keycode" />
+	<field type="CARD8" name="count" />
+	<pad bytes="1" />
+	<field type="TIMESTAMP" name="time" />
+	<pad bytes="20" />
+    </event>
+
+    <event name="ChangeDeviceNotify" number="12">
+	<field type="BYTE" name="device_id" />
+	<field type="TIMESTAMP" name="time" />
+	<field type="CARD8" name="request" />
+	<pad bytes="23" />
+    </event>
+
+    <event name="DeviceKeyStateNotify" number="13">
+	<field type="BYTE" name="device_id" />
+	<list type="CARD8" name="keys">
+            <value>28</value>
+	</list>
+    </event>
+
+    <event name="DeviceButtonStateNotify" number="14">
+	<field type="BYTE" name="device_id" />
+	<list type="CARD8" name="buttons">
+            <value>28</value>
+	</list>
+    </event>
+
+    <event name="DevicePresenceNotify" number="15">
+        <pad bytes="1" />
+        <field type="TIMESTAMP" name="time" />
+        <field type="BYTE" name="devchange" />
+        <field type="BYTE" name="device_id" />
+        <field type="CARD16" name="control" />
+	<pad bytes="20" />
+    </event>
+
+    <!-- ERRORS -->
+    <error name="Device" number="0" />
+    <error name="Event" number="1" />
+    <error name="Mode" number="2" />
+    <error name="DeviceBusy" number="3" />
+    <error name="Class" number="4" />
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/xprint.xml b/libxcb/xcb-proto/src/xprint.xml
new file mode 100644
index 000000000..ffd8df1ea
--- /dev/null
+++ b/libxcb/xcb-proto/src/xprint.xml
@@ -0,0 +1,329 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2005 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xprint" extension-xname="XpExtension" extension-name="XPrint"
+    extension-multiword="true" major-version="1" minor-version="0">
+
+    <!-- Conforms to XPRINT 1.0 -->
+
+    <import>xproto</import>
+    
+    <typedef oldname="char" newname="STRING8" />
+
+    <!-- Types -->
+    <struct name="PRINTER">
+        <field type="CARD32" name="nameLen" />
+        <list type="STRING8" name="name">
+            <fieldref>nameLen</fieldref>
+        </list>
+        <!-- Padding -->
+        <field type="CARD32" name="descLen" />
+        <list type="STRING8" name="description">
+            <fieldref>descLen</fieldref>
+        </list>
+        <!-- More padding -->
+    </struct>
+
+    <!--<typedef oldname="CARD32" newname="PCONTEXT" />-->
+    <xidtype name="PCONTEXT" />
+
+    <!-- "PrintGetDocumentData" -->
+    <enum name="GetDoc">
+        <item name="Finished"><value>0</value></item>
+            <item name="SecondConsumer"><value>1</value></item>
+    </enum>
+
+    <!-- Event Mask ("PrintSelectInput") -->
+    <enum name="EvMask">
+        <item name="NoEventMask"><value>0</value></item>
+        <item name="PrintMask"><bit>0</bit></item>
+        <item name="AttributeMask"><bit>1</bit></item>
+    </enum>
+
+    <!-- "PrintNotify" detail -->
+    <enum name="Detail">
+        <item name="StartJobNotify"><value>1</value></item>
+        <item name="EndJobNotify"><value>2</value></item>
+        <item name="StartDocNotify"><value>3</value></item>
+        <item name="EndDocNotify"><value>4</value></item>
+        <item name="StartPageNotify"><value>5</value></item>
+        <item name="EndPageNotify"><value>6</value></item>
+    </enum>
+
+    <!-- "AttributeNotify" detail -->
+    <enum name="Attr">
+        <item name="JobAttr"><value>1</value></item>
+        <item name="DocAttr"><value>2</value></item>
+        <item name="PageAttr"><value>3</value></item>
+        <item name="PrinterAttr"><value>4</value></item>
+        <item name="ServerAttr"><value>5</value></item>
+        <item name="MediumAttr"><value>6</value></item>
+        <item name="SpoolerAttr"><value>7</value></item>
+    </enum>
+    
+    
+    <!-- Requests -->
+    <request name="PrintQueryVersion" opcode="0">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="major_version" />
+            <field type="CARD16" name="minor_version" />
+        </reply>
+    </request>
+
+    <request name="PrintGetPrinterList" opcode="1">
+        <field type="CARD32" name="printerNameLen" />
+        <field type="CARD32" name="localeLen" />
+        <list type="STRING8" name="printer_name">
+            <fieldref>printerNameLen</fieldref>
+        </list>
+        <!-- There's some padding in here... -->
+        <list type="STRING8" name="locale">
+            <fieldref>localeLen</fieldref>
+        </list>
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="listCount" />
+            <pad bytes="20" />
+            <list type="PRINTER" name="printers">
+                <fieldref>listCount</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="PrintRehashPrinterList" opcode="20" />
+
+    <request name="CreateContext" opcode="2">
+        <field type="CARD32" name="context_id" />
+        <field type="CARD32" name="printerNameLen" />
+        <field type="CARD32" name="localeLen" />
+        <list type="STRING8" name="printerName">
+            <fieldref>printerNameLen</fieldref>
+        </list>
+        <!-- padding -->
+        <list type="STRING8" name="locale">
+            <fieldref>localeLen</fieldref>
+        </list>
+    </request>
+
+    <request name="PrintSetContext" opcode="3">
+        <field type="CARD32" name="context" />
+    </request>
+
+    <request name="PrintGetContext" opcode="4">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="context" />
+        </reply>
+    </request>
+
+    <request name="PrintDestroyContext" opcode="5">
+        <field type="CARD32" name="context" />
+    </request>
+
+    <request name="PrintGetScreenOfContext" opcode="6">
+        <reply>
+            <pad bytes="1" />
+            <field type="WINDOW" name="root" />
+        </reply>
+    </request>
+
+    <request name="PrintStartJob" opcode="7">
+        <field type="CARD8" name="output_mode"/>
+    </request>
+
+    <request name="PrintEndJob" opcode="8">
+        <field type="BOOL"  name="cancel" />
+    </request>
+
+    <request name="PrintStartDoc" opcode="9">
+        <field type="CARD8" name="driver_mode" />
+    </request>
+
+    <request name="PrintEndDoc" opcode="10">
+        <field type="BOOL" name="cancel" />
+    </request>
+
+    <request name="PrintPutDocumentData" opcode="11">
+        <field type="DRAWABLE" name="drawable" />
+        <field type="CARD32" name="len_data" />
+        <field type="CARD16" name="len_fmt" />
+        <field type="CARD16" name="len_options" />
+        <list type="BYTE" name="data">
+            <fieldref>len_data</fieldref>
+        </list>
+        <!-- padding -->
+        <list type="STRING8" name="doc_format" />
+        <!-- padding -->
+        <list type="STRING8" name="options" />
+    </request>
+
+    <request name="PrintGetDocumentData" opcode="12">
+        <field type="PCONTEXT" name="context" />
+        <field type="CARD32" name="max_bytes" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="status_code" />
+            <field type="CARD32" name="finished_flag" />
+            <field type="CARD32" name="dataLen" />
+            <pad bytes="12" />
+            <list type="BYTE" name="data">
+                <fieldref>dataLen</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="PrintStartPage" opcode="13">
+        <field type="WINDOW" name="window" />
+    </request>
+
+    <request name="PrintEndPage" opcode="14">
+        <field type="BOOL" name="cancel" />
+        <pad bytes="3" />
+    </request>
+
+    <request name="PrintSelectInput" opcode="15">
+        <field type="PCONTEXT" name="context" />
+        <valueparam value-mask-type="CARD32"
+                    value-mask-name="event_mask"
+                    value-list-name="event_list" />
+    </request>
+
+    <request name="PrintInputSelected" opcode="16">
+        <field type="PCONTEXT" name="context" />
+        <reply>
+            <pad bytes="1" />
+            <valueparam value-mask-type="CARD32"
+                            value-mask-name="event_mask"
+                            value-list-name="event_list" />
+            <valueparam value-mask-type="CARD32"
+                            value-mask-name="all_events_mask"
+                            value-list-name="all_events_list" />
+        </reply>
+    </request>
+
+    <request name="PrintGetAttributes" opcode="17">
+        <field type="PCONTEXT" name="context" />
+        <field type="CARD8" name="pool" />
+        <pad bytes="3" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="stringLen" />
+            <pad bytes="20" />
+            <field type="STRING8" name="attributes" />
+        </reply>
+    </request>
+
+    <request name="PrintGetOneAttributes" opcode="19">
+        <field type="PCONTEXT" name="context" />
+        <field type="CARD32" name="nameLen" />
+        <field type="CARD8" name="pool" />
+        <pad bytes="3" />
+        <list type="STRING8" name="name">
+            <fieldref>nameLen</fieldref>
+        </list>
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="valueLen" />
+            <pad bytes="20" />
+            <list type="STRING8" name="value">
+                <fieldref>valueLen</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="PrintSetAttributes" opcode="18">
+        <field type="PCONTEXT" name="context" />
+        <field type="CARD32" name="stringLen" />
+        <field type="CARD8" name="pool" />
+        <field type="CARD8" name="rule" />
+        <pad bytes="2" />
+        <list type="STRING8" name="attributes" />
+    </request>
+
+    <request name="PrintGetPageDimensions" opcode="21">
+        <field type="PCONTEXT" name="context" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="width" />
+            <field type="CARD16" name="height" />
+            <field type="CARD16" name="offset_x" />
+            <field type="CARD16" name="offset_y" />
+            <field type="CARD16" name="reproducible_width" />
+            <field type="CARD16" name="reproducible_height" />
+        </reply>
+    </request>
+
+    <request name="PrintQueryScreens" opcode="22">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="listCount" />
+            <pad bytes="20" />
+            <list type="WINDOW" name="roots">
+                <fieldref>listCount</fieldref>
+            </list>
+            <!-- There may be a WINDOW rootWindow here... -->
+        </reply>
+    </request>
+
+    <request name="PrintSetImageResolution" opcode="23">
+        <field type="PCONTEXT" name="context" />
+        <field type="CARD16" name="image_resolution" />
+        <reply>
+            <field type="BOOL" name="status" />
+            <field type="CARD16" name="previous_resolutions" />
+        </reply>
+    </request>
+
+    <request name="PrintGetImageResolution" opcode="24">
+        <field type="PCONTEXT" name="context" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="image_resolution" />
+        </reply>
+    </request>
+
+
+    <!-- Events -->
+    <event name="Notify" number="0">
+        <field type="CARD8" name="detail" />
+        <field type="PCONTEXT" name="context" />
+        <field type="BOOL" name="cancel" />
+    </event>
+
+    <event name="AttributNotify" number="1">
+        <field type="CARD8" name="detail" />
+        <field type="PCONTEXT" name="context" />
+    </event>
+
+    <!-- Errors -->
+    <error name="BadContext" number="0" />
+    <error name="BadSequence" number="1" />
+
+</xcb>
+
diff --git a/libxcb/xcb-proto/src/xproto.xml b/libxcb/xcb-proto/src/xproto.xml
new file mode 100644
index 000000000..6295daeb3
--- /dev/null
+++ b/libxcb/xcb-proto/src/xproto.xml
@@ -0,0 +1,2370 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2001-2004 Bart Massey, Jamey Sharp, and Josh Triplett.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="xproto">
+  <!-- Core protocol types -->
+  
+  <struct name="CHAR2B">
+    <field type="CARD8" name="byte1" />
+    <field type="CARD8" name="byte2" />
+  </struct>
+  
+  <xidtype name="WINDOW" />
+  
+  <xidtype name="PIXMAP" />
+  
+  <xidtype name="CURSOR" />
+  
+  <xidtype name="FONT" />
+  
+  <xidtype name="GCONTEXT" />
+  
+  <xidtype name="COLORMAP" />
+  
+  <xidtype name="ATOM" />
+  
+  <xidunion name="DRAWABLE">
+    <type>WINDOW</type>
+    <type>PIXMAP</type>
+  </xidunion>
+  
+  <xidunion name="FONTABLE">
+    <type>FONT</type>
+    <type>GCONTEXT</type>
+  </xidunion>
+  
+  <typedef oldname="CARD32" newname="VISUALID" />
+
+  <typedef oldname="CARD32" newname="TIMESTAMP" />
+
+  <typedef oldname="CARD32" newname="KEYSYM" />
+
+  <typedef oldname="CARD8" newname="KEYCODE" />
+
+  <typedef oldname="CARD8" newname="BUTTON" />
+
+  <struct name="POINT">
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+  </struct>
+
+  <struct name="RECTANGLE">
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </struct>
+
+  <struct name="ARC">
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="INT16" name="angle1" />
+    <field type="INT16" name="angle2" />
+  </struct>
+
+  <!-- Connection setup-related types -->
+
+  <struct name="FORMAT">
+    <field type="CARD8" name="depth" />
+    <field type="CARD8" name="bits_per_pixel" />
+    <field type="CARD8" name="scanline_pad" />
+    <pad bytes="5" />
+  </struct>
+
+  <enum name="VisualClass">
+    <item name="StaticGray"> <value>0</value></item>
+    <item name="GrayScale">  <value>1</value></item>
+    <item name="StaticColor"><value>2</value></item>
+    <item name="PseudoColor"><value>3</value></item>
+    <item name="TrueColor">  <value>4</value></item>
+    <item name="DirectColor"><value>5</value></item>
+  </enum>
+
+  <struct name="VISUALTYPE">
+    <field type="VISUALID" name="visual_id" />
+    <field type="CARD8" name="class" enum="VisualClass" />
+    <field type="CARD8" name="bits_per_rgb_value" />
+    <field type="CARD16" name="colormap_entries" />
+    <field type="CARD32" name="red_mask" />
+    <field type="CARD32" name="green_mask" />
+    <field type="CARD32" name="blue_mask" />
+    <pad bytes="4" />
+  </struct>
+
+  <struct name="DEPTH">
+    <field type="CARD8" name="depth" />
+    <pad bytes="1" />
+    <field type="CARD16" name="visuals_len" />
+    <pad bytes="4" />
+    <list type="VISUALTYPE" name="visuals">
+      <fieldref>visuals_len</fieldref>
+    </list>
+  </struct>
+
+  <enum name="EventMask">
+    <item name="NoEvent">           <value>0</value></item>
+    <item name="KeyPress">            <bit>0</bit></item>
+    <item name="KeyRelease">          <bit>1</bit></item>
+    <item name="ButtonPress">         <bit>2</bit></item>
+    <item name="ButtonRelease">       <bit>3</bit></item>
+    <item name="EnterWindow">         <bit>4</bit></item>
+    <item name="LeaveWindow">         <bit>5</bit></item>
+    <item name="PointerMotion">       <bit>6</bit></item>
+    <item name="PointerMotionHint">   <bit>7</bit></item>
+    <item name="Button1Motion">       <bit>8</bit></item>
+    <item name="Button2Motion">       <bit>9</bit></item>
+    <item name="Button3Motion">       <bit>10</bit></item>
+    <item name="Button4Motion">       <bit>11</bit></item>
+    <item name="Button5Motion">       <bit>12</bit></item>
+    <item name="ButtonMotion">        <bit>13</bit></item>
+    <item name="KeymapState">         <bit>14</bit></item>
+    <item name="Exposure">            <bit>15</bit></item>
+    <item name="VisibilityChange">    <bit>16</bit></item>
+    <item name="StructureNotify">     <bit>17</bit></item>
+    <item name="ResizeRedirect">      <bit>18</bit></item>
+    <item name="SubstructureNotify">  <bit>19</bit></item>
+    <item name="SubstructureRedirect"><bit>20</bit></item>
+    <item name="FocusChange">         <bit>21</bit></item>
+    <item name="PropertyChange">      <bit>22</bit></item>
+    <item name="ColorMapChange">      <bit>23</bit></item>
+    <item name="OwnerGrabButton">     <bit>24</bit></item>
+  </enum>
+
+  <enum name="BackingStore">
+    <item name="NotUseful"> <value>0</value></item>
+    <item name="WhenMapped"><value>1</value></item>
+    <item name="Always">    <value>2</value></item>
+  </enum>
+
+  <struct name="SCREEN">
+    <field type="WINDOW" name="root" />
+    <field type="COLORMAP" name="default_colormap" />
+    <field type="CARD32" name="white_pixel" />
+    <field type="CARD32" name="black_pixel" />
+    <field type="CARD32" name="current_input_masks" mask="EventMask" />
+    <field type="CARD16" name="width_in_pixels" />
+    <field type="CARD16" name="height_in_pixels" />
+    <field type="CARD16" name="width_in_millimeters" />
+    <field type="CARD16" name="height_in_millimeters" />
+    <field type="CARD16" name="min_installed_maps" />
+    <field type="CARD16" name="max_installed_maps" />
+    <field type="VISUALID" name="root_visual" />
+    <field type="BYTE" name="backing_stores" enum="BackingStore" />
+    <field type="BOOL" name="save_unders" />
+    <field type="CARD8" name="root_depth" />
+    <field type="CARD8" name="allowed_depths_len" />
+    <list type="DEPTH" name="allowed_depths">
+      <fieldref>allowed_depths_len</fieldref>
+    </list>
+  </struct>
+
+  <struct name="SetupRequest">
+    <field type="CARD8" name="byte_order" />
+    <pad bytes="1" />
+    <field type="CARD16" name="protocol_major_version" />
+    <field type="CARD16" name="protocol_minor_version" />
+    <field type="CARD16" name="authorization_protocol_name_len" />
+    <field type="CARD16" name="authorization_protocol_data_len" />
+    <pad bytes="2" />
+    <list type="char" name="authorization_protocol_name">
+      <fieldref>authorization_protocol_name_len</fieldref>
+    </list>
+    <list type="char" name="authorization_protocol_data">
+      <fieldref>authorization_protocol_data_len</fieldref>
+    </list>
+  </struct>
+
+  <struct name="SetupFailed">
+    <field type="CARD8" name="status" /> <!-- always 0 -> Failed -->
+    <field type="CARD8" name="reason_len" />
+    <field type="CARD16" name="protocol_major_version" />
+    <field type="CARD16" name="protocol_minor_version" />
+    <field type="CARD16" name="length" />
+    <list type="char" name="reason">
+      <fieldref>reason_len</fieldref>
+    </list>
+  </struct>
+
+  <struct name="SetupAuthenticate">
+    <field type="CARD8" name="status" /> <!-- always 2 -> Authenticate -->
+    <pad bytes="5" />
+    <field type="CARD16" name="length" />
+    <list type="char" name="reason">
+      <op op="*">
+        <fieldref>length</fieldref>
+        <value>4</value>
+      </op>
+    </list>
+  </struct>
+
+  <enum name="ImageOrder">
+    <item name="LSBFirst"><value>0</value></item>
+    <item name="MSBFirst"><value>1</value></item>
+  </enum>
+
+  <struct name="Setup">
+    <field type="CARD8" name="status" /> <!-- always 1 -> Success -->
+    <pad bytes="1" />
+    <field type="CARD16" name="protocol_major_version" />
+    <field type="CARD16" name="protocol_minor_version" />
+    <field type="CARD16" name="length" />
+    <field type="CARD32" name="release_number" />
+    <field type="CARD32" name="resource_id_base" />
+    <field type="CARD32" name="resource_id_mask" />
+    <field type="CARD32" name="motion_buffer_size" />
+    <field type="CARD16" name="vendor_len" />
+    <field type="CARD16" name="maximum_request_length" />
+    <field type="CARD8" name="roots_len" />
+    <field type="CARD8" name="pixmap_formats_len" />
+    <field type="CARD8" name="image_byte_order" enum="ImageOrder" />
+    <field type="CARD8" name="bitmap_format_bit_order" enum="ImageOrder" />
+    <field type="CARD8" name="bitmap_format_scanline_unit" />
+    <field type="CARD8" name="bitmap_format_scanline_pad" />
+    <field type="KEYCODE" name="min_keycode" />
+    <field type="KEYCODE" name="max_keycode" />
+    <pad bytes="4" />
+    <list type="char" name="vendor">
+      <fieldref>vendor_len</fieldref>
+    </list>
+    <list type="FORMAT" name="pixmap_formats">
+      <fieldref>pixmap_formats_len</fieldref>
+    </list>
+    <list type="SCREEN" name="roots">
+      <fieldref>roots_len</fieldref>
+    </list>
+  </struct>
+
+  <!-- Core event types -->
+  
+  <enum name="ModMask">
+    <item name="Shift">  <bit>0</bit></item>
+    <item name="Lock">   <bit>1</bit></item>
+    <item name="Control"><bit>2</bit></item>
+    <item name="1">      <bit>3</bit></item>
+    <item name="2">      <bit>4</bit></item>
+    <item name="3">      <bit>5</bit></item>
+    <item name="4">      <bit>6</bit></item>
+    <item name="5">      <bit>7</bit></item>
+    <item name="Any">    <bit>15</bit></item>
+  </enum>
+
+  <enum name="KeyButMask">
+    <item name="Shift">  <bit>0</bit></item>
+    <item name="Lock">   <bit>1</bit></item>
+    <item name="Control"><bit>2</bit></item>
+    <item name="Mod1">   <bit>3</bit></item>
+    <item name="Mod2">   <bit>4</bit></item>
+    <item name="Mod3">   <bit>5</bit></item>
+    <item name="Mod4">   <bit>6</bit></item>
+    <item name="Mod5">   <bit>7</bit></item>
+    <item name="Button1"><bit>8</bit></item>
+    <item name="Button2"><bit>9</bit></item>
+    <item name="Button3"><bit>10</bit></item>
+    <item name="Button4"><bit>11</bit></item>
+    <item name="Button5"><bit>12</bit></item>
+  </enum>
+
+  <enum name="Window">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <event name="KeyPress" number="2">
+    <field type="KEYCODE" name="detail" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="WINDOW" name="root" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="child" altenum="Window" />
+    <field type="INT16" name="root_x" />
+    <field type="INT16" name="root_y" />
+    <field type="INT16" name="event_x" />
+    <field type="INT16" name="event_y" />
+    <field type="CARD16" name="state" mask="KeyButMask" />
+    <field type="BOOL" name="same_screen" />
+    <pad bytes="1" />
+  </event>
+
+  <eventcopy name="KeyRelease" number="3" ref="KeyPress" />
+
+  <enum name="ButtonMask">
+    <item name="1">      <bit>8</bit></item>
+    <item name="2">      <bit>9</bit></item>
+    <item name="3">      <bit>10</bit></item>
+    <item name="4">      <bit>11</bit></item>
+    <item name="5">      <bit>12</bit></item>
+    <item name="Any">    <bit>15</bit></item>
+  </enum>
+
+  <event name="ButtonPress" number="4">
+    <field type="BUTTON" name="detail" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="WINDOW" name="root" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="child" altenum="Window" />
+    <field type="INT16" name="root_x" />
+    <field type="INT16" name="root_y" />
+    <field type="INT16" name="event_x" />
+    <field type="INT16" name="event_y" />
+    <field type="CARD16" name="state" mask="KeyButMask" />
+    <field type="BOOL" name="same_screen" />
+    <pad bytes="1" />
+  </event>
+
+  <eventcopy name="ButtonRelease" number="5" ref="ButtonPress" />
+
+  <!-- MotionNotify detail -->
+  <enum name="Motion">
+    <item name="Normal"><value>0</value></item>
+    <item name="Hint">  <value>1</value></item>
+  </enum>
+
+  <event name="MotionNotify" number="6">
+    <field type="BYTE" name="detail" enum="Motion" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="WINDOW" name="root" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="child" altenum="Window" />
+    <field type="INT16" name="root_x" />
+    <field type="INT16" name="root_y" />
+    <field type="INT16" name="event_x" />
+    <field type="INT16" name="event_y" />
+    <field type="CARD16" name="state" mask="KeyButMask" />
+    <field type="BOOL" name="same_screen" />
+    <pad bytes="1" />
+  </event>
+
+  <enum name="NotifyDetail">
+    <item name="Ancestor">        <value>0</value></item>
+    <item name="Virtual">         <value>1</value></item>
+    <item name="Inferior">        <value>2</value></item>
+    <item name="Nonlinear">       <value>3</value></item>
+    <item name="NonlinearVirtual"><value>4</value></item>
+    <item name="Pointer">         <value>5</value></item>
+    <item name="PointerRoot">     <value>6</value></item>
+    <item name="None">            <value>7</value></item>
+  </enum>
+
+  <enum name="NotifyMode">
+    <item name="Normal">      <value>0</value></item>
+    <item name="Grab">        <value>1</value></item>
+    <item name="Ungrab">      <value>2</value></item>
+    <item name="WhileGrabbed"><value>3</value></item>
+  </enum>
+
+  <event name="EnterNotify" number="7">
+    <field type="BYTE" name="detail" enum="NotifyDetail" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="WINDOW" name="root" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="child" altenum="Window" />
+    <field type="INT16" name="root_x" />
+    <field type="INT16" name="root_y" />
+    <field type="INT16" name="event_x" />
+    <field type="INT16" name="event_y" />
+    <field type="CARD16" name="state" mask="KeyButMask" />
+    <field type="BYTE" name="mode" enum="NotifyMode" />
+    <field type="BYTE" name="same_screen_focus" />
+  </event>
+
+  <eventcopy name="LeaveNotify" number="8" ref="EnterNotify" />
+
+  <event name="FocusIn" number="9">
+    <field type="BYTE" name="detail" enum="NotifyDetail" />
+    <field type="WINDOW" name="event" />
+    <field type="BYTE" name="mode" enum="NotifyMode" />
+    <pad bytes="3" />
+  </event>
+
+  <eventcopy name="FocusOut" number="10" ref="FocusIn" />
+
+  <event name="KeymapNotify" number="11" no-sequence-number="true">
+    <list type="CARD8" name="keys"><value>31</value></list>
+  </event>
+
+  <event name="Expose" number="12">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="CARD16" name="x" />
+    <field type="CARD16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="count" />
+    <pad bytes="2" />
+  </event>
+
+  <event name="GraphicsExposure" number="13">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="x" />
+    <field type="CARD16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD16" name="count" />
+    <field type="CARD8" name="major_opcode" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="NoExposure" number="14">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD8" name="major_opcode" />
+    <pad bytes="1" />
+  </event>
+
+  <enum name="Visibility">
+    <item name="Unobscured">       <value>0</value></item>
+    <item name="PartiallyObscured"><value>1</value></item>
+    <item name="FullyObscured">    <value>2</value></item>
+  </enum>
+
+  <event name="VisibilityNotify" number="15">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="BYTE" name="state" enum="Visibility" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="CreateNotify" number="16">
+    <pad bytes="1" />
+    <field type="WINDOW" name="parent" />
+    <field type="WINDOW" name="window" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="border_width" />
+    <field type="BOOL" name="override_redirect" />
+    <pad bytes="1" />
+  </event>
+
+  <event name="DestroyNotify" number="17">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+  </event>
+
+  <event name="UnmapNotify" number="18">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <field type="BOOL" name="from_configure" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="MapNotify" number="19">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <field type="BOOL" name="override_redirect" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="MapRequest" number="20">
+    <pad bytes="1" />
+    <field type="WINDOW" name="parent" />
+    <field type="WINDOW" name="window" />
+  </event>
+
+  <event name="ReparentNotify" number="21">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <field type="WINDOW" name="parent" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="BOOL" name="override_redirect" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="ConfigureNotify" number="22">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <field type="WINDOW" name="above_sibling" altenum="Window" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="border_width" />
+    <field type="BOOL" name="override_redirect" />
+    <pad bytes="1" />
+  </event>
+
+  <event name="ConfigureRequest" number="23">
+    <field type="BYTE" name="stack_mode" enum="StackMode" />
+    <field type="WINDOW" name="parent" />
+    <field type="WINDOW" name="window" />
+    <field type="WINDOW" name="sibling" altenum="Window" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="border_width" />
+    <field type="CARD16" name="value_mask" mask="ConfigWindow" />
+  </event>
+
+  <event name="GravityNotify" number="24">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+  </event>
+
+  <event name="ResizeRequest" number="25">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </event>
+
+  <enum name="Place">
+    <item name="OnTop">   <value>0</value></item>
+    <item name="OnBottom"><value>1</value></item>
+  </enum>
+
+  <event name="CirculateNotify" number="26">
+    <pad bytes="1" />
+    <field type="WINDOW" name="event" />
+    <field type="WINDOW" name="window" />
+    <pad bytes="4" />
+    <field type="BYTE" name="place" enum="Place" />
+    <pad bytes="3" />
+  </event>
+
+  <eventcopy name="CirculateRequest" number="27" ref="CirculateNotify" />
+
+  <enum name="Property">
+    <item name="NewValue"><value>0</value></item>
+    <item name="Delete">  <value>1</value></item>
+  </enum>
+
+  <event name="PropertyNotify" number="28">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="atom" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="BYTE" name="state" enum="Property" />
+    <pad bytes="3" />
+  </event>
+
+  <event name="SelectionClear" number="29">
+    <pad bytes="1" />
+    <field type="TIMESTAMP" name="time" />
+    <field type="WINDOW" name="owner" />
+    <field type="ATOM" name="selection" />
+  </event>
+
+  <enum name="Time">
+    <item name="CurrentTime"> <value>0</value> </item>
+  </enum>
+
+  <enum name="Atom">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <event name="SelectionRequest" number="30">
+    <pad bytes="1" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+    <field type="WINDOW" name="owner" />
+    <field type="WINDOW" name="requestor" />
+    <field type="ATOM" name="selection" />
+    <field type="ATOM" name="target" />
+    <field type="ATOM" name="property" altenum="Atom" />
+  </event>
+
+  <event name="SelectionNotify" number="31">
+    <pad bytes="1" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+    <field type="WINDOW" name="requestor" />
+    <field type="ATOM" name="selection" />
+    <field type="ATOM" name="target" />
+    <field type="ATOM" name="property" altenum="Atom" />
+  </event>
+
+  <enum name="ColormapState">
+    <item name="Uninstalled"><value>0</value></item>
+    <item name="Installed">  <value>1</value></item>
+  </enum>
+
+  <enum name="Colormap">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <event name="ColormapNotify" number="32">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="COLORMAP" name="colormap" altenum="Colormap" />
+    <field type="BOOL" name="new" />
+    <field type="BYTE" name="state" enum="ColormapState" />
+    <pad bytes="2" />
+  </event>
+
+  <union name="ClientMessageData">
+    <!-- The format member of the ClientMessage event determines which array
+         to use. -->
+    <list type="CARD8"  name="data8" ><value>20</value></list> <!--  8 -->
+    <list type="CARD16" name="data16"><value>10</value></list> <!-- 16 -->
+    <list type="CARD32" name="data32"><value>5</value></list>  <!-- 32 -->
+  </union>
+
+  <event name="ClientMessage" number="33">
+    <field type="CARD8" name="format" /> <!-- 8, 16, or 32. -->
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="type" />
+    <field type="ClientMessageData" name="data" />
+  </event>
+
+  <enum name="Mapping">
+    <item name="Modifier"><value>0</value></item>
+    <item name="Keyboard"><value>1</value></item>
+    <item name="Pointer"> <value>2</value></item>
+  </enum>
+
+  <event name="MappingNotify" number="34">
+    <pad bytes="1" />
+    <field type="BYTE" name="request" enum="Mapping" />
+    <field type="KEYCODE" name="first_keycode" />
+    <field type="CARD8" name="count" />
+    <pad bytes="1" />
+  </event>
+
+
+
+  <!-- Core error types -->
+
+
+
+  <error name="Request" number="1">
+    <field type="CARD32" name="bad_value" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD8" name="major_opcode" />
+    <pad bytes="1" />
+  </error>
+
+  <error name="Value" number="2">
+    <field type="CARD32" name="bad_value" />
+    <field type="CARD16" name="minor_opcode" />
+    <field type="CARD8" name="major_opcode" />
+    <pad bytes="1" />
+  </error>
+
+  <errorcopy name="Window" number="3" ref="Value" />
+  <errorcopy name="Pixmap" number="4" ref="Value" />
+  <errorcopy name="Atom" number="5" ref="Value" />
+  <errorcopy name="Cursor" number="6" ref="Value" />
+  <errorcopy name="Font" number="7" ref="Value" />
+  <errorcopy name="Match" number="8" ref="Request" />
+  <errorcopy name="Drawable" number="9" ref="Value" />
+  <errorcopy name="Access" number="10" ref="Request" />
+  <errorcopy name="Alloc" number="11" ref="Request" />
+  <errorcopy name="Colormap" number="12" ref="Value" />
+  <errorcopy name="GContext" number="13" ref="Value" />
+  <errorcopy name="IDChoice" number="14" ref="Value" />
+  <errorcopy name="Name" number="15" ref="Request" />
+  <errorcopy name="Length" number="16" ref="Request" />
+  <errorcopy name="Implementation" number="17" ref="Request" />
+
+
+
+  <!-- The core requests, in major number order. -->
+  <!-- It is the caller's responsibility to free returned XCB*Rep objects. -->
+
+
+
+  <enum name="WindowClass">
+    <item name="CopyFromParent"><value>0</value></item>
+    <item name="InputOutput">   <value>1</value></item>
+    <item name="InputOnly">     <value>2</value></item>
+  </enum>
+
+  <!-- Window attributes for CreateWindow and ChangeWindowAttributes. -->
+  <enum name="CW">
+    <item name="BackPixmap">      <bit>0</bit></item>
+    <item name="BackPixel">       <bit>1</bit></item>
+    <item name="BorderPixmap">    <bit>2</bit></item>
+    <item name="BorderPixel">     <bit>3</bit></item>
+    <item name="BitGravity">      <bit>4</bit></item>
+    <item name="WinGravity">      <bit>5</bit></item>
+    <item name="BackingStore">    <bit>6</bit></item>
+    <item name="BackingPlanes">   <bit>7</bit></item>
+    <item name="BackingPixel">    <bit>8</bit></item>
+    <item name="OverrideRedirect"><bit>9</bit></item>
+    <item name="SaveUnder">       <bit>10</bit></item>
+    <item name="EventMask">       <bit>11</bit></item>
+    <item name="DontPropagate">   <bit>12</bit></item>
+    <item name="Colormap">        <bit>13</bit></item>
+    <item name="Cursor">          <bit>14</bit></item>
+  </enum>
+  
+  <enum name="BackPixmap">
+    <item name="None">          <value>0</value></item>
+    <item name="ParentRelative"><value>1</value></item>
+  </enum>
+
+  <enum name="Gravity">
+    <item name="BitForget"><value>0</value></item>
+    <item name="WinUnmap"> <value>0</value></item>
+    <item name="NorthWest"><value>1</value></item>
+    <item name="North">    <value>2</value></item>
+    <item name="NorthEast"><value>3</value></item>
+    <item name="West">     <value>4</value></item>
+    <item name="Center">   <value>5</value></item>
+    <item name="East">     <value>6</value></item>
+    <item name="SouthWest"><value>7</value></item>
+    <item name="South">    <value>8</value></item>
+    <item name="SouthEast"><value>9</value></item>
+    <item name="Static">   <value>10</value></item>
+  </enum>
+
+  <request name="CreateWindow" opcode="1">
+    <field type="CARD8" name="depth" />
+    <field type="WINDOW" name="wid" />
+    <field type="WINDOW" name="parent" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD16" name="border_width" />
+    <field type="CARD16" name="class" enum="WindowClass" />
+    <field type="VISUALID" name="visual" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="ChangeWindowAttributes" opcode="2">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+  
+  <enum name="MapState">
+    <item name="Unmapped">  <value>0</value></item>
+    <item name="Unviewable"><value>1</value></item>
+    <item name="Viewable">  <value>2</value></item>
+  </enum>
+
+  <request name="GetWindowAttributes" opcode="3">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <reply>
+      <field type="CARD8" name="backing_store" enum="BackingStore" />
+      <field type="VISUALID" name="visual" />
+      <field type="CARD16" name="class" enum="WindowClass" />
+      <field type="CARD8" name="bit_gravity" enum="Gravity" />
+      <field type="CARD8" name="win_gravity" enum="Gravity" />
+      <field type="CARD32" name="backing_planes" />
+      <field type="CARD32" name="backing_pixel" />
+      <field type="BOOL" name="save_under" />
+      <field type="BOOL" name="map_is_installed" />
+      <field type="CARD8" name="map_state" enum="MapState" />
+      <field type="BOOL" name="override_redirect" />
+      <field type="COLORMAP" name="colormap" altenum="Colormap" />
+      <field type="CARD32" name="all_event_masks" mask="EventMask" />
+      <field type="CARD32" name="your_event_mask" mask="EventMask" />
+      <field type="CARD16" name="do_not_propagate_mask" mask="EventMask" />
+      <pad bytes="2" />
+    </reply>
+  </request>
+
+  <request name="DestroyWindow" opcode="4">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="DestroySubwindows" opcode="5">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+  
+  <enum name="SetMode">
+    <item name="Insert"><value>0</value></item>
+    <item name="Delete"><value>1</value></item>
+  </enum>
+
+  <request name="ChangeSaveSet" opcode="6">
+    <field type="BYTE" name="mode" enum="SetMode" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="ReparentWindow" opcode="7">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="WINDOW" name="parent" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+  </request>
+
+  <request name="MapWindow" opcode="8">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="MapSubwindows" opcode="9">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="UnmapWindow" opcode="10">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="UnmapSubwindows" opcode="11">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+  </request>
+  
+  <enum name="ConfigWindow">
+    <item name="X">          <bit>0</bit></item>
+    <item name="Y">          <bit>1</bit></item>
+    <item name="Width">      <bit>2</bit></item>
+    <item name="Height">     <bit>3</bit></item>
+    <item name="BorderWidth"><bit>4</bit></item>
+    <item name="Sibling">    <bit>5</bit></item>
+    <item name="StackMode">  <bit>6</bit></item>
+  </enum>
+  
+  <enum name="StackMode">
+    <item name="Above">   <value>0</value></item>
+    <item name="Below">   <value>1</value></item>
+    <item name="TopIf">   <value>2</value></item>
+    <item name="BottomIf"><value>3</value></item>
+    <item name="Opposite"><value>4</value></item>
+  </enum>
+
+  <request name="ConfigureWindow" opcode="12">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <valueparam value-mask-type="CARD16"
+                value-mask-name="value_mask"
+                value-mask-pad="2"
+                value-list-name="value_list" />
+  </request>
+
+  <enum name="Circulate">
+    <item name="RaiseLowest"> <value>0</value></item>
+    <item name="LowerHighest"><value>1</value></item>
+  </enum>
+
+  <request name="CirculateWindow" opcode="13">
+    <field type="CARD8" name="direction" enum="Circulate" />
+    <field type="WINDOW" name="window" />
+  </request>
+
+  <request name="GetGeometry" opcode="14">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <reply>
+      <field type="CARD8" name="depth" />
+      <field type="WINDOW" name="root" />
+      <field type="INT16" name="x" />
+      <field type="INT16" name="y" />
+      <field type="CARD16" name="width" />
+      <field type="CARD16" name="height" />
+      <field type="CARD16" name="border_width" />
+      <pad bytes="2" />
+    </reply>
+  </request>
+
+  <request name="QueryTree" opcode="15">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="WINDOW" name="root" />
+      <field type="WINDOW" name="parent" altenum="Window" />
+      <field type="CARD16" name="children_len" />
+      <pad bytes="14" />
+      <list type="WINDOW" name="children">
+        <fieldref>children_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="InternAtom" opcode="16">
+    <field type="BOOL" name="only_if_exists" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+    <reply>
+      <pad bytes="1" />
+      <field type="ATOM" name="atom" altenum="Atom" />
+    </reply>
+  </request>
+
+  <request name="GetAtomName" opcode="17">
+    <pad bytes="1" />
+    <field type="ATOM" name="atom" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="name_len" />
+      <pad bytes="22" />
+      <list type="char" name="name">
+        <fieldref>name_len</fieldref>
+      </list>
+    </reply>
+  </request>
+  
+  <enum name="PropMode">
+    <item name="Replace"><value>0</value></item>
+    <item name="Prepend"><value>1</value></item>
+    <item name="Append"> <value>2</value></item>
+  </enum>
+
+  <request name="ChangeProperty" opcode="18">
+    <field type="CARD8" name="mode" enum="PropMode" />
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="property" />
+    <field type="ATOM" name="type" />
+    <field type="CARD8" name="format" />
+    <pad bytes="3" />
+    <field type="CARD32" name="data_len" />
+    <list type="void" name="data">
+      <op op="/">
+        <op op="*">
+          <fieldref>data_len</fieldref>
+          <fieldref>format</fieldref>
+        </op>
+        <value>8</value>
+      </op>
+    </list>
+  </request>
+
+  <request name="DeleteProperty" opcode="19">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="property" />
+  </request>
+  
+  <enum name="GetPropertyType">
+    <item name="Any"><value>0</value></item>
+  </enum>
+
+  <request name="GetProperty" opcode="20">
+    <field type="BOOL" name="delete" />
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="property" />
+    <field type="ATOM" name="type" altenum="GetPropertyType" />
+    <field type="CARD32" name="long_offset" />
+    <field type="CARD32" name="long_length" />
+    <reply>
+      <field type="CARD8" name="format" />
+      <field type="ATOM" name="type" />
+      <field type="CARD32" name="bytes_after" />
+      <field type="CARD32" name="value_len" />
+      <pad bytes="12" />
+      <list type="void" name="value">
+	<op op="*">
+	  <fieldref>value_len</fieldref>
+	  <op op="/">
+	    <fieldref>format</fieldref>
+	    <value>8</value>
+	  </op>
+	</op>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ListProperties" opcode="21">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="atoms_len" />
+      <pad bytes="22" />
+      <list type="ATOM" name="atoms">
+        <fieldref>atoms_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetSelectionOwner" opcode="22">
+    <pad bytes="1" />
+    <field type="WINDOW" name="owner" altenum="Window" />
+    <field type="ATOM" name="selection" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <request name="GetSelectionOwner" opcode="23">
+    <pad bytes="1" />
+    <field type="ATOM" name="selection" />
+    <reply>
+      <pad bytes="1" />
+      <field type="WINDOW" name="owner" altenum="Window" />
+    </reply>
+  </request>
+
+  <request name="ConvertSelection" opcode="24">
+    <pad bytes="1" />
+    <field type="WINDOW" name="requestor" />
+    <field type="ATOM" name="selection" />
+    <field type="ATOM" name="target" />
+    <field type="ATOM" name="property" altenum="Atom" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <enum name="SendEventDest">
+    <item name="PointerWindow"><value>0</value></item>
+    <item name="ItemFocus">    <value>1</value></item>
+  </enum>
+
+  <request name="SendEvent" opcode="25">
+    <field type="BOOL" name="propagate" />
+    <field type="WINDOW" name="destination" altenum="SendEventDest" />
+    <field type="CARD32" name="event_mask" mask="EventMask" />
+    <list type="char" name="event"><value>32</value></list>
+  </request>
+
+  <enum name="GrabMode">
+    <item name="Sync"> <value>0</value></item>
+    <item name="Async"><value>1</value></item>
+  </enum>
+
+  <enum name="GrabStatus">
+    <item name="Success">       <value>0</value></item>
+    <item name="AlreadyGrabbed"><value>1</value></item>
+    <item name="InvalidTime">   <value>2</value></item>
+    <item name="NotViewable">   <value>3</value></item>
+    <item name="Frozen">        <value>4</value></item>
+  </enum>
+
+  <enum name="Cursor">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <request name="GrabPointer" opcode="26">
+    <field type="BOOL" name="owner_events" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="CARD16" name="event_mask" mask="EventMask" />
+    <field type="BYTE" name="pointer_mode" enum="GrabMode" />
+    <field type="BYTE" name="keyboard_mode" enum="GrabMode" />
+    <field type="WINDOW" name="confine_to" altenum="Window" />
+    <field type="CURSOR" name="cursor" altenum="Cursor" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+    <reply>
+      <field type="BYTE" name="status" enum="GrabStatus" />
+    </reply>
+  </request>
+
+  <request name="UngrabPointer" opcode="27">
+    <pad bytes="1" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <enum name="ButtonIndex">
+     <item name="Any"><value>0</value></item>
+     <item name="1">  <value>1</value></item>
+     <item name="2">  <value>2</value></item>
+     <item name="3">  <value>3</value></item>
+     <item name="4">  <value>4</value></item>
+     <item name="5">  <value>5</value></item>
+  </enum>
+
+  <request name="GrabButton" opcode="28">
+    <field type="BOOL" name="owner_events" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="CARD16" name="event_mask" mask="EventMask" />
+    <field type="CARD8" name="pointer_mode" enum="GrabMode" />
+    <field type="CARD8" name="keyboard_mode" enum="GrabMode" />
+    <field type="WINDOW" name="confine_to" altenum="Window" />
+    <field type="CURSOR" name="cursor" altenum="Cursor" />
+    <field type="CARD8" name="button" enum="ButtonIndex" />
+    <pad bytes="1" />
+    <field type="CARD16" name="modifiers" mask="ModMask" />
+  </request>
+
+  <request name="UngrabButton" opcode="29">
+    <field type="CARD8" name="button" enum="ButtonIndex" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="CARD16" name="modifiers" mask="ModMask" />
+    <pad bytes="2" />
+  </request>
+
+  <request name="ChangeActivePointerGrab" opcode="30">
+    <pad bytes="1" />
+    <field type="CURSOR" name="cursor" altenum="Cursor" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+    <field type="CARD16" name="event_mask" mask="EventMask" />
+    <pad bytes="2" />
+  </request>
+
+  <request name="GrabKeyboard" opcode="31">
+    <field type="BOOL" name="owner_events" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+    <field type="BYTE" name="pointer_mode" enum="GrabMode" />
+    <field type="BYTE" name="keyboard_mode" enum="GrabMode" />
+    <pad bytes="2" />
+    <reply>
+      <field type="BYTE" name="status" enum="GrabStatus" />
+    </reply>
+  </request>
+
+  <request name="UngrabKeyboard" opcode="32">
+    <pad bytes="1" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <!-- Use KEYCODE any = { XCBGrabAny }; to grab any key -->
+  <enum name="Grab">
+    <item name="Any"><value>0</value></item>
+  </enum>
+
+  <request name="GrabKey" opcode="33">
+    <field type="BOOL" name="owner_events" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="CARD16" name="modifiers" mask="ModMask" />
+    <field type="KEYCODE" name="key" altenum="Grab" />
+    <field type="CARD8" name="pointer_mode" enum="GrabMode" />
+    <field type="CARD8" name="keyboard_mode" enum="GrabMode" />
+    <pad bytes="3" />
+  </request>
+
+  <request name="UngrabKey" opcode="34">
+    <field type="KEYCODE" name="key" altenum="Grab" />
+    <field type="WINDOW" name="grab_window" />
+    <field type="CARD16" name="modifiers" mask="ModMask" />
+    <pad bytes="2" />
+  </request>
+
+  <enum name="Allow">
+    <item name="AsyncPointer">  <value>0</value></item>
+    <item name="SyncPointer">   <value>1</value></item>
+    <item name="ReplayPointer"> <value>2</value></item>
+    <item name="AsyncKeyboard"> <value>3</value></item>
+    <item name="SyncKeyboard">  <value>4</value></item>
+    <item name="ReplayKeyboard"><value>5</value></item>
+    <item name="AsyncBoth">     <value>6</value></item>
+    <item name="SyncBoth">      <value>7</value></item>
+  </enum>
+
+  <request name="AllowEvents" opcode="35">
+    <field type="CARD8" name="mode" enum="Allow" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <request name="GrabServer" opcode="36" />
+
+  <request name="UngrabServer" opcode="37" />
+
+  <request name="QueryPointer" opcode="38">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <reply>
+      <field type="BOOL" name="same_screen" />
+      <field type="WINDOW" name="root" />
+      <field type="WINDOW" name="child" altenum="Window" />
+      <field type="INT16" name="root_x" />
+      <field type="INT16" name="root_y" />
+      <field type="INT16" name="win_x" />
+      <field type="INT16" name="win_y" />
+      <field type="CARD16" name="mask" mask="KeyButMask" />
+      <pad bytes="2" />
+    </reply>
+  </request>
+
+  <struct name="TIMECOORD">
+    <field type="TIMESTAMP" name="time" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+  </struct>
+
+  <request name="GetMotionEvents" opcode="39">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="TIMESTAMP" name="start" altenum="Time" />
+    <field type="TIMESTAMP" name="stop" altenum="Time" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="events_len" />
+      <pad bytes="20" />
+      <list type="TIMECOORD" name="events">
+        <fieldref>events_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="TranslateCoordinates" opcode="40">
+    <pad bytes="1" />
+    <field type="WINDOW" name="src_window" />
+    <field type="WINDOW" name="dst_window" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <reply>
+      <field type="BOOL" name="same_screen" />
+      <field type="WINDOW" name="child" altenum="Window" />
+      <field type="CARD16" name="dst_x" />
+      <field type="CARD16" name="dst_y" />
+    </reply>
+  </request>
+
+  <request name="WarpPointer" opcode="41">
+    <pad bytes="1" />
+    <field type="WINDOW" name="src_window" altenum="Window" />
+    <field type="WINDOW" name="dst_window" altenum="Window" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <field type="CARD16" name="src_width" />
+    <field type="CARD16" name="src_height" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+  </request>
+
+  <!-- used for revert_to and focus -->
+  <enum name="InputFocus">
+    <item name="None">       <value>0</value></item>
+    <item name="PointerRoot"><value>1</value></item>
+    <item name="Parent">     <value>2</value></item>  <!-- revert_to only -->
+    <item name="FollowKeyboard"><value>3</value></item>  <!-- xinput extension only -->
+  </enum>
+
+  <request name="SetInputFocus" opcode="42">
+    <field type="CARD8" name="revert_to" enum="InputFocus" />
+    <field type="WINDOW" name="focus" altenum="InputFocus" />
+    <field type="TIMESTAMP" name="time" altenum="Time" />
+  </request>
+
+  <request name="GetInputFocus" opcode="43">
+    <reply>
+      <field type="CARD8" name="revert_to" enum="InputFocus" />
+      <field type="WINDOW" name="focus" altenum="InputFocus" />
+    </reply>
+  </request>
+
+  <request name="QueryKeymap" opcode="44">
+    <reply>
+      <pad bytes="1" />
+      <list type="CARD8" name="keys"><value>32</value></list>
+    </reply>
+  </request>
+
+  <request name="OpenFont" opcode="45">
+    <pad bytes="1" />
+    <field type="FONT" name="fid" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+  </request>
+
+  <request name="CloseFont" opcode="46">
+    <pad bytes="1" />
+    <field type="FONT" name="font" />
+  </request>
+
+  <enum name="FontDraw">
+    <item name="LeftToRight"><value>0</value></item>
+    <item name="RightToLeft"><value>1</value></item>
+  </enum>
+
+  <struct name="FONTPROP">
+    <field type="ATOM" name="name" />
+    <field type="CARD32" name="value" />
+  </struct>
+
+  <struct name="CHARINFO">
+    <field type="INT16" name="left_side_bearing" />
+    <field type="INT16" name="right_side_bearing" />
+    <field type="INT16" name="character_width" />
+    <field type="INT16" name="ascent" />
+    <field type="INT16" name="descent" />
+    <field type="CARD16" name="attributes" />
+  </struct>
+
+  <request name="QueryFont" opcode="47">
+    <pad bytes="1" />
+    <field type="FONTABLE" name="font" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CHARINFO" name="min_bounds" />
+      <pad bytes="4" />
+      <field type="CHARINFO" name="max_bounds" />
+      <pad bytes="4" />
+      <field type="CARD16" name="min_char_or_byte2" />
+      <field type="CARD16" name="max_char_or_byte2" />
+      <field type="CARD16" name="default_char" />
+      <field type="CARD16" name="properties_len" />
+      <field type="BYTE" name="draw_direction" enum="FontDraw" />
+      <field type="CARD8" name="min_byte1" />
+      <field type="CARD8" name="max_byte1" />
+      <field type="BOOL" name="all_chars_exist" />
+      <field type="INT16" name="font_ascent" />
+      <field type="INT16" name="font_descent" />
+      <field type="CARD32" name="char_infos_len" />
+      <list type="FONTPROP" name="properties">
+        <fieldref>properties_len</fieldref>
+      </list>
+      <list type="CHARINFO" name="char_infos">
+        <fieldref>char_infos_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="QueryTextExtents" opcode="48">
+    <exprfield type="BOOL" name="odd_length">
+      <op op="&amp;"><fieldref>string_len</fieldref><value>1</value></op>
+    </exprfield>
+    <field type="FONTABLE" name="font" />
+    <list type="CHAR2B" name="string" />
+    <reply>
+      <field type="BYTE" name="draw_direction" enum="FontDraw" />
+      <field type="INT16" name="font_ascent" />
+      <field type="INT16" name="font_descent" />
+      <field type="INT16" name="overall_ascent" />
+      <field type="INT16" name="overall_descent" />
+      <field type="INT32" name="overall_width" />
+      <field type="INT32" name="overall_left" />
+      <field type="INT32" name="overall_right" />
+    </reply>
+  </request>
+
+  <struct name="STR">
+    <field type="CARD8" name="name_len" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+  </struct>
+
+  <request name="ListFonts" opcode="49">
+    <pad bytes="1" />
+    <field type="CARD16" name="max_names" />
+    <field type="CARD16" name="pattern_len" />
+    <list type="char" name="pattern">
+      <fieldref>pattern_len</fieldref>
+    </list>
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="names_len" />
+      <pad bytes="22" />
+      <list type="STR" name="names">
+        <fieldref>names_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ListFontsWithInfo" opcode="50">
+    <pad bytes="1" />
+    <field type="CARD16" name="max_names" />
+    <field type="CARD16" name="pattern_len" />
+    <list type="char" name="pattern">
+      <fieldref>pattern_len</fieldref>
+    </list>
+    <reply>
+      <field type="CARD8" name="name_len" />
+      <field type="CHARINFO" name="min_bounds" />
+      <pad bytes="4" />
+      <field type="CHARINFO" name="max_bounds" />
+      <pad bytes="4" />
+      <field type="CARD16" name="min_char_or_byte2" />
+      <field type="CARD16" name="max_char_or_byte2" />
+      <field type="CARD16" name="default_char" />
+      <field type="CARD16" name="properties_len" />
+      <field type="BYTE" name="draw_direction" enum="FontDraw" />
+      <field type="CARD8" name="min_byte1" />
+      <field type="CARD8" name="max_byte1" />
+      <field type="BOOL" name="all_chars_exist" />
+      <field type="INT16" name="font_ascent" />
+      <field type="INT16" name="font_descent" />
+      <field type="CARD32" name="replies_hint" />
+      <list type="FONTPROP" name="properties">
+        <fieldref>properties_len</fieldref>
+      </list>
+      <list type="char" name="name">
+        <fieldref>name_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetFontPath" opcode="51">
+    <pad bytes="1" />
+    <field type="CARD16" name="font_qty" />
+    <list type="char" name="path" />
+  </request>
+
+  <request name="GetFontPath" opcode="52">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="path_len" />
+      <pad bytes="22" />
+      <list type="STR" name="path">
+        <fieldref>path_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="CreatePixmap" opcode="53">
+    <field type="CARD8" name="depth" />
+    <field type="PIXMAP" name="pid" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </request>
+
+  <request name="FreePixmap" opcode="54">
+    <pad bytes="1" />
+    <field type="PIXMAP" name="pixmap" />
+  </request>
+  
+  <enum name="GC">
+    <item name="Function">          <bit>0</bit></item>
+    <item name="PlaneMask">         <bit>1</bit></item>
+    <item name="Foreground">        <bit>2</bit></item>
+    <item name="Background">        <bit>3</bit></item>
+    <item name="LineWidth">         <bit>4</bit></item>
+    <item name="LineStyle">         <bit>5</bit></item>
+    <item name="CapStyle">          <bit>6</bit></item>
+    <item name="JoinStyle">         <bit>7</bit></item>
+    <item name="FillStyle">         <bit>8</bit></item>
+    <item name="FillRule">          <bit>9</bit></item>
+    <item name="Tile">              <bit>10</bit></item>
+    <item name="Stipple">           <bit>11</bit></item>
+    <item name="TileStippleOriginX"><bit>12</bit></item>
+    <item name="TileStippleOriginY"><bit>13</bit></item>
+    <item name="Font">              <bit>14</bit></item>
+    <item name="SubwindowMode">     <bit>15</bit></item>
+    <item name="GraphicsExposures"> <bit>16</bit></item>
+    <item name="ClipOriginX">       <bit>17</bit></item>
+    <item name="ClipOriginY">       <bit>18</bit></item>
+    <item name="ClipMask">          <bit>19</bit></item>
+    <item name="DashOffset">        <bit>20</bit></item>
+    <item name="DashList">          <bit>21</bit></item>
+    <item name="ArcMode">           <bit>22</bit></item>
+  </enum>
+
+  <!-- GC Function values -->
+  <enum name="GX">
+    <item name="clear">       <value>0</value></item>
+    <item name="and">         <value>1</value></item>
+    <item name="andReverse">  <value>2</value></item>
+    <item name="copy">        <value>3</value></item>
+    <item name="andInverted"> <value>4</value></item>
+    <item name="noop">        <value>5</value></item>
+    <item name="xor">         <value>6</value></item>
+    <item name="or">          <value>7</value></item>
+    <item name="nor">         <value>8</value></item>
+    <item name="equiv">       <value>9</value></item>
+    <item name="invert">      <value>10</value></item>
+    <item name="orReverse">   <value>11</value></item>
+    <item name="copyInverted"><value>12</value></item>
+    <item name="orInverted">  <value>13</value></item>
+    <item name="nand">        <value>14</value></item>
+    <item name="set">         <value>15</value></item>
+  </enum>
+
+  <enum name="LineStyle">
+    <item name="Solid">     <value>0</value></item>
+    <item name="OnOffDash"> <value>1</value></item>
+    <item name="DoubleDash"><value>2</value></item>
+  </enum>
+
+  <enum name="CapStyle">
+    <item name="NotLast">   <value>0</value></item>
+    <item name="Butt">      <value>1</value></item>
+    <item name="Round">     <value>2</value></item>
+    <item name="Projecting"><value>3</value></item>
+  </enum>
+
+  <enum name="JoinStyle">
+    <item name="Miter">     <value>0</value></item>
+    <item name="Round">     <value>1</value></item>
+    <item name="Bevel">     <value>2</value></item>
+  </enum>
+
+  <enum name="FillStyle">
+    <item name="Solid">         <value>0</value></item>
+    <item name="Tiled">         <value>1</value></item>
+    <item name="Stippled">      <value>2</value></item>
+    <item name="OpaqueStippled"><value>3</value></item>
+  </enum>
+
+  <enum name="FillRule">
+    <item name="EvenOdd"><value>0</value></item>
+    <item name="Winding"><value>1</value></item>
+  </enum>
+
+  <enum name="SubwindowMode">
+    <item name="ClipByChildren">  <value>0</value></item>
+    <item name="IncludeInferiors"><value>1</value></item>
+  </enum>
+
+  <enum name="ArcMode">
+    <item name="Chord">   <value>0</value></item>
+    <item name="PieSlice"><value>1</value></item>
+  </enum>
+
+  <request name="CreateGC" opcode="55">
+    <pad bytes="1" />
+    <field type="GCONTEXT" name="cid" />
+    <field type="DRAWABLE" name="drawable" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="ChangeGC" opcode="56">
+    <pad bytes="1" />
+    <field type="GCONTEXT" name="gc" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="CopyGC" opcode="57">
+    <pad bytes="1" />
+    <field type="GCONTEXT" name="src_gc" />
+    <field type="GCONTEXT" name="dst_gc" />
+    <field type="CARD32" name="value_mask" mask="GC" />
+  </request>
+
+  <request name="SetDashes" opcode="58">
+    <pad bytes="1" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="CARD16" name="dash_offset" />
+    <field type="CARD16" name="dashes_len" />
+    <list type="CARD8" name="dashes">
+      <fieldref>dashes_len</fieldref>
+    </list>
+  </request>
+
+  <enum name="ClipOrdering">
+    <item name="Unsorted"><value>0</value></item>
+    <item name="YSorted"> <value>1</value></item>
+    <item name="YXSorted"><value>2</value></item>
+    <item name="YXBanded"><value>3</value></item>
+  </enum>
+
+  <request name="SetClipRectangles" opcode="59">
+    <field type="BYTE" name="ordering" enum="ClipOrdering" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="clip_x_origin" />
+    <field type="INT16" name="clip_y_origin" />
+    <list type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="FreeGC" opcode="60">
+    <pad bytes="1" />
+    <field type="GCONTEXT" name="gc" />
+  </request>
+
+  <request name="ClearArea" opcode="61">
+    <field type="BOOL" name="exposures" />
+    <field type="WINDOW" name="window" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </request>
+
+  <request name="CopyArea" opcode="62">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="src_drawable" />
+    <field type="DRAWABLE" name="dst_drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+  </request>
+
+  <request name="CopyPlane" opcode="63">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="src_drawable" />
+    <field type="DRAWABLE" name="dst_drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="src_x" />
+    <field type="INT16" name="src_y" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD32" name="bit_plane" />
+  </request>
+  
+  <enum name="CoordMode">
+    <item name="Origin">  <value>0</value></item>
+    <item name="Previous"><value>1</value></item>
+  </enum>
+
+  <!-- combine-adjacent doesn't work for mode==Relative -->
+  <request name="PolyPoint" opcode="64">
+    <field type="BYTE" name="coordinate_mode" enum="CoordMode" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="POINT" name="points" />
+  </request>
+
+  <request name="PolyLine" opcode="65" combine-adjacent="true">
+    <field type="BYTE" name="coordinate_mode" enum="CoordMode" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="POINT" name="points" />
+  </request>
+
+  <struct name="SEGMENT">
+    <field type="INT16" name="x1" />
+    <field type="INT16" name="y1" />
+    <field type="INT16" name="x2" />
+    <field type="INT16" name="y2" />
+  </struct>
+
+  <request name="PolySegment" opcode="66" combine-adjacent="true">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="SEGMENT" name="segments" />
+  </request>
+
+  <request name="PolyRectangle" opcode="67" combine-adjacent="true">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <!--
+    The semantics of PolyArc change after the first arc: the GC's
+    join style may be applied to successive arcs under some circumstances.
+    So using combine-adjacent here is bad.
+  -->
+  <request name="PolyArc" opcode="68">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="ARC" name="arcs" />
+  </request>
+
+  <enum name="PolyShape">
+    <item name="Complex">  <value>0</value></item>
+    <item name="Nonconvex"><value>1</value></item>
+    <item name="Convex">   <value>2</value></item>
+  </enum>
+
+  <request name="FillPoly" opcode="69">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="CARD8" name="shape" enum="PolyShape" />
+    <field type="CARD8" name="coordinate_mode" enum="CoordMode" />
+    <pad bytes="2" />
+    <list type="POINT" name="points" />
+  </request>
+
+  <request name="PolyFillRectangle" opcode="70" combine-adjacent="true">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="RECTANGLE" name="rectangles" />
+  </request>
+
+  <request name="PolyFillArc" opcode="71" combine-adjacent="true">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <list type="ARC" name="arcs" />
+  </request>
+  
+  <enum name="ImageFormat">
+    <item name="XYBitmap"><value>0</value></item>
+    <item name="XYPixmap"><value>1</value></item>
+    <item name="ZPixmap"> <value>2</value></item>
+  </enum>
+
+  <request name="PutImage" opcode="72">
+    <field type="CARD8" name="format" enum="ImageFormat" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="INT16" name="dst_x" />
+    <field type="INT16" name="dst_y" />
+    <field type="CARD8" name="left_pad" />
+    <field type="CARD8" name="depth" />
+    <pad bytes="2" />
+    <list type="BYTE" name="data" />
+  </request>
+
+  <!-- FIXME: data array in reply will include padding, but ought not to. -->
+  <request name="GetImage" opcode="73">
+    <field type="CARD8" name="format" enum="ImageFormat" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <field type="CARD32" name="plane_mask" />
+    <reply>
+      <field type="CARD8" name="depth" />
+      <field type="VISUALID" name="visual" />
+      <pad bytes="20" />
+      <list type="BYTE" name="data">
+        <op op="*">
+          <fieldref>length</fieldref>
+          <value>4</value>
+        </op>
+      </list>
+    </reply>
+  </request>
+
+  <request name="PolyText8" opcode="74">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <list type="BYTE" name="items" />
+  </request>
+
+  <request name="PolyText16" opcode="75">
+    <pad bytes="1" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <list type="BYTE" name="items" />
+  </request>
+
+  <request name="ImageText8" opcode="76">
+    <field type="BYTE" name="string_len" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <list type="char" name="string">
+      <fieldref>string_len</fieldref>
+    </list>
+  </request>
+
+  <request name="ImageText16" opcode="77">
+    <field type="BYTE" name="string_len" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="GCONTEXT" name="gc" />
+    <field type="INT16" name="x" />
+    <field type="INT16" name="y" />
+    <list type="CHAR2B" name="string">
+      <fieldref>string_len</fieldref>
+    </list>
+  </request>
+
+  <enum name= "ColormapAlloc">
+    <item name="None"><value>0</value></item>
+    <item name="All"> <value>1</value></item>
+  </enum>
+
+  <request name="CreateColormap" opcode="78">
+    <field type="BYTE" name="alloc" enum="ColormapAlloc" />
+    <field type="COLORMAP" name="mid" />
+    <field type="WINDOW" name="window" />
+    <field type="VISUALID" name="visual" />
+  </request>
+
+  <request name="FreeColormap" opcode="79">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+  </request>
+
+  <request name="CopyColormapAndFree" opcode="80">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="mid" />
+    <field type="COLORMAP" name="src_cmap" />
+  </request>
+
+  <request name="InstallColormap" opcode="81">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+  </request>
+
+  <request name="UninstallColormap" opcode="82">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+  </request>
+
+  <request name="ListInstalledColormaps" opcode="83">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="cmaps_len" />
+      <pad bytes="22" />
+      <list type="COLORMAP" name="cmaps">
+        <fieldref>cmaps_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="AllocColor" opcode="84">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD16" name="red" />
+    <field type="CARD16" name="green" />
+    <field type="CARD16" name="blue" />
+    <pad bytes="2" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="red" />
+      <field type="CARD16" name="green" />
+      <field type="CARD16" name="blue" />
+      <pad bytes="2" />
+      <field type="CARD32" name="pixel" />
+    </reply>
+  </request>
+
+  <request name="AllocNamedColor" opcode="85">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="pixel" />
+      <field type="CARD16" name="exact_red" />
+      <field type="CARD16" name="exact_green" />
+      <field type="CARD16" name="exact_blue" />
+      <field type="CARD16" name="visual_red" />
+      <field type="CARD16" name="visual_green" />
+      <field type="CARD16" name="visual_blue" />
+    </reply>
+  </request>
+
+  <request name="AllocColorCells" opcode="86">
+    <field type="BOOL" name="contiguous" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD16" name="colors" />
+    <field type="CARD16" name="planes" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="pixels_len" />
+      <field type="CARD16" name="masks_len" />
+      <pad bytes="20" />
+      <list type="CARD32" name="pixels">
+        <fieldref>pixels_len</fieldref>
+      </list>
+      <list type="CARD32" name="masks">
+        <fieldref>masks_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="AllocColorPlanes" opcode="87">
+    <field type="BOOL" name="contiguous" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD16" name="colors" />
+    <field type="CARD16" name="reds" />
+    <field type="CARD16" name="greens" />
+    <field type="CARD16" name="blues" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="pixels_len" />
+      <pad bytes="2" />
+      <field type="CARD32" name="red_mask" />
+      <field type="CARD32" name="green_mask" />
+      <field type="CARD32" name="blue_mask" />
+      <pad bytes="8" />
+      <list type="CARD32" name="pixels">
+        <fieldref>pixels_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="FreeColors" opcode="88">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD32" name="plane_mask" />
+    <list type="CARD32" name="pixels" />
+  </request>
+
+  <enum name="ColorFlag">
+    <item name="Red">  <bit>0</bit></item>
+    <item name="Green"><bit>1</bit></item>
+    <item name="Blue"> <bit>2</bit></item>
+  </enum>
+
+  <struct name="COLORITEM">
+    <field type="CARD32" name="pixel" />
+    <field type="CARD16" name="red" />
+    <field type="CARD16" name="green" />
+    <field type="CARD16" name="blue" />
+    <field type="BYTE" name="flags" mask="ColorFlag" />
+    <pad bytes="1" />
+  </struct>
+  
+  <request name="StoreColors" opcode="89" combine-adjacent="true">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <list type="COLORITEM" name="items" />
+  </request>
+
+  <request name="StoreNamedColor" opcode="90">
+    <field type="CARD8" name="flags" mask="ColorFlag" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD32" name="pixel" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+  </request>
+
+  <struct name="RGB">
+    <field type="CARD16" name="red" />
+    <field type="CARD16" name="green" />
+    <field type="CARD16" name="blue" />
+    <pad bytes="2" />
+  </struct>
+
+  <request name="QueryColors" opcode="91">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <list type="CARD32" name="pixels" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="colors_len" />
+      <pad bytes="22" />
+      <list type="RGB" name="colors">
+        <fieldref>colors_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="LookupColor" opcode="92">
+    <pad bytes="1" />
+    <field type="COLORMAP" name="cmap" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="exact_red" />
+      <field type="CARD16" name="exact_green" />
+      <field type="CARD16" name="exact_blue" />
+      <field type="CARD16" name="visual_red" />
+      <field type="CARD16" name="visual_green" />
+      <field type="CARD16" name="visual_blue" />
+    </reply>
+  </request>
+
+  <enum name="Pixmap">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <request name="CreateCursor" opcode="93">
+    <pad bytes="1" />
+    <field type="CURSOR" name="cid" />
+    <field type="PIXMAP" name="source" />
+    <field type="PIXMAP" name="mask" altenum="Pixmap" />
+    <field type="CARD16" name="fore_red" />
+    <field type="CARD16" name="fore_green" />
+    <field type="CARD16" name="fore_blue" />
+    <field type="CARD16" name="back_red" />
+    <field type="CARD16" name="back_green" />
+    <field type="CARD16" name="back_blue" />
+    <field type="CARD16" name="x" />
+    <field type="CARD16" name="y" />
+  </request>
+
+  <enum name="Font">
+    <item name="None"> <value>0</value></item>
+  </enum>
+
+  <request name="CreateGlyphCursor" opcode="94">
+    <pad bytes="1" />
+    <field type="CURSOR" name="cid" />
+    <field type="FONT" name="source_font" />
+    <field type="FONT" name="mask_font" altenum="Font" />
+    <field type="CARD16" name="source_char" />
+    <field type="CARD16" name="mask_char" />
+    <field type="CARD16" name="fore_red" />
+    <field type="CARD16" name="fore_green" />
+    <field type="CARD16" name="fore_blue" />
+    <field type="CARD16" name="back_red" />
+    <field type="CARD16" name="back_green" />
+    <field type="CARD16" name="back_blue" />
+  </request>
+
+  <request name="FreeCursor" opcode="95">
+    <pad bytes="1" />
+    <field type="CURSOR" name="cursor" />
+  </request>
+
+  <request name="RecolorCursor" opcode="96">
+    <pad bytes="1" />
+    <field type="CURSOR" name="cursor" />
+    <field type="CARD16" name="fore_red" />
+    <field type="CARD16" name="fore_green" />
+    <field type="CARD16" name="fore_blue" />
+    <field type="CARD16" name="back_red" />
+    <field type="CARD16" name="back_green" />
+    <field type="CARD16" name="back_blue" />
+  </request>
+
+  <enum name="QueryShapeOf">
+    <item name="LargestCursor"> <value>0</value></item>
+    <item name="FastestTile">   <value>1</value></item>
+    <item name="FastestStipple"><value>2</value></item>    
+  </enum>
+
+  <request name="QueryBestSize" opcode="97">
+    <field type="CARD8" name="class" enum="QueryShapeOf" />
+    <field type="DRAWABLE" name="drawable" />
+    <field type="CARD16" name="width" />
+    <field type="CARD16" name="height" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="width" />
+      <field type="CARD16" name="height" />
+    </reply>
+  </request>
+
+  <request name="QueryExtension" opcode="98">
+    <pad bytes="1" />
+    <field type="CARD16" name="name_len" />
+    <pad bytes="2" />
+    <list type="char" name="name">
+      <fieldref>name_len</fieldref>
+    </list>
+    <reply>
+      <pad bytes="1" />
+      <field type="BOOL" name="present" />
+      <field type="CARD8" name="major_opcode" />
+      <field type="CARD8" name="first_event" />
+      <field type="CARD8" name="first_error" />
+    </reply>
+  </request>
+
+  <request name="ListExtensions" opcode="99">
+    <reply>
+      <field type="CARD8" name="names_len" />
+      <pad bytes="24" />
+      <list type="STR" name="names">
+        <fieldref>names_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ChangeKeyboardMapping" opcode="100">
+    <field type="CARD8" name="keycode_count" />
+    <field type="KEYCODE" name="first_keycode" />
+    <field type="CARD8" name="keysyms_per_keycode" />
+    <list type="KEYSYM" name="keysyms">
+      <op op="*">
+        <fieldref>keycode_count</fieldref>
+        <fieldref>keysyms_per_keycode</fieldref>
+      </op>
+    </list>
+  </request>
+
+  <request name="GetKeyboardMapping" opcode="101">
+    <pad bytes="1" />
+    <field type="KEYCODE" name="first_keycode" />
+    <field type="CARD8" name="count" />
+    <reply>
+      <field type="BYTE" name="keysyms_per_keycode" />
+      <pad bytes="24" />
+      <list type="KEYSYM" name="keysyms">
+        <fieldref>length</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <enum name="KB">
+    <item name="KeyClickPercent"><bit>0</bit></item>
+    <item name="BellPercent">    <bit>1</bit></item>
+    <item name="BellPitch">      <bit>2</bit></item>
+    <item name="BellDuration">   <bit>3</bit></item>
+    <item name="Led">            <bit>4</bit></item>
+    <item name="LedMode">        <bit>5</bit></item>
+    <item name="Key">            <bit>6</bit></item>
+    <item name="AutoRepeatMode"> <bit>7</bit></item>
+  </enum>
+
+  <enum name="LedMode">
+    <item name="Off"><value>0</value></item>
+    <item name="On"> <value>1</value></item>
+  </enum>
+
+  <enum name="AutoRepeatMode">
+    <item name="Off">    <value>0</value></item>
+    <item name="On">     <value>1</value></item>
+    <item name="Default"><value>2</value></item>
+  </enum>
+
+  <request name="ChangeKeyboardControl" opcode="102">
+    <pad bytes="1" />
+    <valueparam value-mask-type="CARD32"
+                value-mask-name="value_mask"
+                value-list-name="value_list" />
+  </request>
+
+  <request name="GetKeyboardControl" opcode="103">
+    <reply>
+      <field type="BYTE" name="global_auto_repeat" enum="AutoRepeatMode" />
+      <field type="CARD32" name="led_mask" />
+      <field type="CARD8" name="key_click_percent" />
+      <field type="CARD8" name="bell_percent" />
+      <field type="CARD16" name="bell_pitch" />
+      <field type="CARD16" name="bell_duration" />
+      <pad bytes="2" />
+      <list type="CARD8" name="auto_repeats"><value>32</value></list>
+    </reply>
+  </request>
+
+  <request name="Bell" opcode="104">
+    <field type="INT8" name="percent" />
+  </request>
+
+  <request name="ChangePointerControl" opcode="105">
+    <pad bytes="1" />
+    <field type="INT16" name="acceleration_numerator" />
+    <field type="INT16" name="acceleration_denominator" />
+    <field type="INT16" name="threshold" />
+    <field type="BOOL" name="do_acceleration" />
+    <field type="BOOL" name="do_threshold" />
+  </request>
+
+  <request name="GetPointerControl" opcode="106">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="acceleration_numerator" />
+      <field type="CARD16" name="acceleration_denominator" />
+      <field type="CARD16" name="threshold" />
+      <pad bytes="18" />
+    </reply>
+  </request>
+
+  <!-- Screen saver timeout and interval can be set to -1 to restore defaults
+       and set to 0 to disable the screen saver. -->
+
+  <enum name="Blanking">
+    <item name="NotPreferred"><value>0</value></item>
+    <item name="Preferred">   <value>1</value></item>
+    <item name="Default">     <value>2</value></item>
+  </enum>
+
+  <enum name="Exposures">
+    <item name="NotAllowed"><value>0</value></item>
+    <item name="Allowed">   <value>1</value></item>
+    <item name="Default">   <value>2</value></item>
+  </enum>
+
+  <request name="SetScreenSaver" opcode="107">
+    <pad bytes="1" />
+    <field type="INT16" name="timeout" />
+    <field type="INT16" name="interval" />
+    <field type="CARD8" name="prefer_blanking" enum="Blanking" />
+    <field type="CARD8" name="allow_exposures" enum="Exposures" />
+  </request>
+
+  <request name="GetScreenSaver" opcode="108">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="timeout" />
+      <field type="CARD16" name="interval" />
+      <field type="BYTE" name="prefer_blanking" enum="Blanking" />
+      <field type="BYTE" name="allow_exposures" enum="Exposures" />
+      <pad bytes="18" />
+    </reply>
+  </request>
+
+  <enum name="HostMode">
+    <item name="Insert"><value>0</value></item>
+    <item name="Delete"><value>1</value></item>
+  </enum>
+
+  <!-- also used and extended for Xau authentication -->
+  <enum name="Family">
+    <item name="Internet">         <value>0</value></item>
+    <item name="DECnet">           <value>1</value></item>
+    <item name="Chaos">            <value>2</value></item>
+    <item name="ServerInterpreted"><value>5</value></item>
+    <item name="Internet6">        <value>6</value></item>
+  </enum>
+
+  <request name="ChangeHosts" opcode="109">
+    <field type="CARD8" name="mode" enum="HostMode" />
+    <field type="CARD8" name="family" enum="Family" />
+    <pad bytes="1" />
+    <field type="CARD16" name="address_len" />
+    <list type="char" name="address">
+      <fieldref>address_len</fieldref>
+    </list>
+  </request>
+
+  <struct name="HOST">
+    <field type="CARD8" name="family" enum="Family" />
+    <pad bytes="1" />
+    <field type="CARD16" name="address_len" />
+    <list type="BYTE" name="address">
+      <fieldref>address_len</fieldref>
+    </list>
+  </struct>
+
+  <request name="ListHosts" opcode="110">
+    <reply>
+      <field type="BYTE" name="mode" enum="AccessControl" />
+      <field type="CARD16" name="hosts_len" />
+      <pad bytes="22" />
+      <list type="HOST" name="hosts">
+        <fieldref>hosts_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <enum name="AccessControl">
+    <item name="Disable"><value>0</value></item>
+    <item name="Enable"> <value>1</value></item>
+  </enum>
+
+  <request name="SetAccessControl" opcode="111">
+    <field type="CARD8" name="mode" enum="AccessControl" />
+  </request>
+
+  <enum name="CloseDown">
+    <item name="DestroyAll">     <value>0</value></item>
+    <item name="RetainPermanent"><value>1</value></item>
+    <item name="RetainTemporary"><value>2</value></item>
+  </enum>
+
+  <request name="SetCloseDownMode" opcode="112">
+    <field type="CARD8" name="mode" enum="CloseDown" />
+  </request>
+
+  <enum name="Kill">
+    <item name="AllTemporary"><value>0</value></item>
+  </enum>
+
+  <request name="KillClient" opcode="113">
+    <pad bytes="1" />
+    <field type="CARD32" name="resource" altenum="Kill" />
+  </request>
+
+  <request name="RotateProperties" opcode="114">
+    <pad bytes="1" />
+    <field type="WINDOW" name="window" />
+    <field type="CARD16" name="atoms_len" />
+    <field type="INT16" name="delta" />
+    <list type="ATOM" name="atoms">
+      <fieldref>atoms_len</fieldref>
+    </list>
+  </request>
+
+  <enum name="ScreenSaver">
+    <item name="Reset"> <value>0</value></item>
+    <item name="Active"><value>1</value></item>
+  </enum>
+
+  <request name="ForceScreenSaver" opcode="115">
+    <field type="CARD8" name="mode" enum="ScreenSaver" />
+  </request>
+
+  <!-- Reply from SetPointerMapping or SetModifierMapping -->
+  <enum name="MappingStatus">
+    <item name="Success"><value>0</value></item>
+    <item name="Busy">   <value>1</value></item>
+    <item name="Failure"><value>2</value></item>
+  </enum>
+
+  <request name="SetPointerMapping" opcode="116">
+    <field type="CARD8" name="map_len" />
+    <list type="CARD8" name="map">
+      <fieldref>map_len</fieldref>
+    </list>
+    <reply>
+      <field type="BYTE" name="status" enum="MappingStatus" />
+    </reply>
+  </request>
+
+  <request name="GetPointerMapping" opcode="117">
+    <reply>
+      <field type="CARD8" name="map_len" />
+      <pad bytes="24" />
+      <list type="CARD8" name="map">
+        <fieldref>map_len</fieldref>
+      </list>
+    </reply>
+  </request>
+  
+  <enum name="MapIndex">
+    <item name="Shift">  <value>0</value></item>
+    <item name="Lock">   <value>1</value></item>
+    <item name="Control"><value>2</value></item>
+    <item name="1">      <value>3</value></item>
+    <item name="2">      <value>4</value></item>
+    <item name="3">      <value>5</value></item>
+    <item name="4">      <value>6</value></item>
+    <item name="5">      <value>7</value></item>
+  </enum>
+
+  <request name="SetModifierMapping" opcode="118">
+    <field type="CARD8" name="keycodes_per_modifier" />
+    <list type="KEYCODE" name="keycodes">
+      <op op="*">
+        <fieldref>keycodes_per_modifier</fieldref>
+        <value>8</value>
+      </op>
+    </list>
+    <reply>
+      <field type="BYTE" name="status" enum="MappingStatus" />
+    </reply>
+  </request>
+
+  <request name="GetModifierMapping" opcode="119">
+    <reply>
+      <field type="CARD8" name="keycodes_per_modifier" />
+      <pad bytes="24" />
+      <list type="KEYCODE" name="keycodes">
+        <op op="*">
+          <fieldref>keycodes_per_modifier</fieldref>
+          <value>8</value>
+        </op>
+      </list>
+    </reply>
+  </request>
+
+  <!--
+    FIXME: NoOperation should allow specifying payload length
+    but geez, malloc()ing a 262140 byte buffer just so I have something
+    to hand to write(2) seems silly...!
+  -->
+  <request name="NoOperation" opcode="127" />
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/xselinux.xml b/libxcb/xcb-proto/src/xselinux.xml
new file mode 100644
index 000000000..7751470ca
--- /dev/null
+++ b/libxcb/xcb-proto/src/xselinux.xml
@@ -0,0 +1,276 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+<xcb header="xselinux" extension-xname="SELinux" extension-name="SELinux"
+     extension-multiword="false" major-version="1" minor-version="0">
+  <import>xproto</import>
+
+  <request name="QueryVersion" opcode="0">
+    <field type="CARD8" name="client_major" />
+    <field type="CARD8" name="client_minor" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD16" name="server_major" />
+      <field type="CARD16" name="server_minor" />
+    </reply>
+  </request>
+
+  <request name="SetDeviceCreateContext" opcode="1">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetDeviceCreateContext" opcode="2">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetDeviceContext" opcode="3">
+    <field type="CARD32" name="device" />
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetDeviceContext" opcode="4">
+    <field type="CARD32" name="device" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetWindowCreateContext" opcode="5">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetWindowCreateContext" opcode="6">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetWindowContext" opcode="7">
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <struct name="ListItem">
+    <field type="ATOM" name="name" />
+    <field type="CARD32" name="object_context_len" />
+    <field type="CARD32" name="data_context_len" />
+    <list type="char" name="object_context">
+      <fieldref>object_context_len</fieldref>
+    </list>
+    <list type="char" name="data_context">
+      <fieldref>data_context_len</fieldref>
+    </list>
+  </struct>
+
+  <request name="SetPropertyCreateContext" opcode="8">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetPropertyCreateContext" opcode="9">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetPropertyUseContext" opcode="10">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetPropertyUseContext" opcode="11">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetPropertyContext" opcode="12">
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="property" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetPropertyDataContext" opcode="13">
+    <field type="WINDOW" name="window" />
+    <field type="ATOM" name="property" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ListProperties" opcode="14">
+    <field type="WINDOW" name="window" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="properties_len" />
+      <pad bytes="20" />
+      <list type="ListItem" name="properties">
+	<fieldref>properties_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetSelectionCreateContext" opcode="15">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetSelectionCreateContext" opcode="16">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="SetSelectionUseContext" opcode="17">
+    <field type="CARD32" name="context_len" />
+    <list type="char" name="context">
+      <fieldref>context_len</fieldref>
+    </list>
+  </request>
+
+  <request name="GetSelectionUseContext" opcode="18">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetSelectionContext" opcode="19">
+    <field type="ATOM" name="selection" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetSelectionDataContext" opcode="20">
+    <field type="ATOM" name="selection" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="ListSelections" opcode="21">
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="selections_len" />
+      <pad bytes="20" />
+      <list type="ListItem" name="selections">
+	<fieldref>selections_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+  <request name="GetClientContext" opcode="22">
+    <field type="CARD32" name="resource" />
+    <reply>
+      <pad bytes="1" />
+      <field type="CARD32" name="context_len" />
+      <pad bytes="20" />
+      <list type="char" name="context">
+	<fieldref>context_len</fieldref>
+      </list>
+    </reply>
+  </request>
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/xtest.xml b/libxcb/xcb-proto/src/xtest.xml
new file mode 100644
index 000000000..e481929b7
--- /dev/null
+++ b/libxcb/xcb-proto/src/xtest.xml
@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Ian Osgood
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person ob/Sintaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xtest" extension-xname="XTEST" extension-name="Test"
+    major-version="2" minor-version="1">
+    <!-- Conforms to XTEST 2.1 -->
+
+    <import>xproto</import>
+    
+    <!-- Requests -->
+    <request name="GetVersion" opcode="0">
+        <field type="CARD8"  name="major_version" />
+        <pad bytes="1" />
+        <field type="CARD16" name="minor_version" />
+        <reply>
+            <field type="CARD8"  name="major_version" />
+            <field type="CARD16" name="minor_version" />
+        </reply>
+    </request>
+
+    <enum name="Cursor">
+        <item name="None">   <value>0</value></item>
+        <item name="Current"><value>1</value></item>
+    </enum>
+
+    <request name="CompareCursor" opcode="1">
+        <field type="WINDOW" name="window" />
+        <field type="CURSOR" name="cursor" />
+        <reply>
+            <field type="BOOL" name="same" />
+        </reply>
+    </request>
+    
+    <!-- There are several ways to use the FakeInput request:
+            1. Simulate a keypress:
+                type   = XCBKeyPress or XCBKeyRelease
+                detail = keycode
+            2. Simulate a button:
+                type   = XCBButtonPress or XCBButtonRelease
+                detail = enum XCBButton (1..5)
+            3. Simulate mouse motion:
+                type   = XCBMotionNotify
+                detail = 0 or 1
+                root = XCBNone or a root window id
+                rootX,
+                rootY  = position (relative if detail==1)
+
+        Version 2.2 adds support for the XInput extension:
+            4. Simulate a device keypress
+            5. Simulate a device button
+            6. Simulate a proximity event
+            7. Simulate a device motion event
+                [These are not yet supported, since we would also need to
+                 send the variable-length state of the axes.]
+
+        In each case, time is set to a delay in milliseconds.
+    -->
+
+    <request name="FakeInput" opcode="2">
+        <field type="BYTE"   name="type" />
+        <field type="BYTE"   name="detail" />
+        <pad bytes="2" />
+        <field type="CARD32" name="time" />
+        <field type="WINDOW" name="root" />
+        <pad bytes="8" />
+        <field type="CARD16" name="rootX" />
+        <field type="CARD16" name="rootY" />
+        <pad bytes="7" />
+        <!-- Version 2.2: XInput device -->
+        <field type="CARD8"  name="deviceid" />
+        <!-- Version 2.2: optional axes state here -->
+    </request>
+
+    <request name="GrabControl" opcode="3">
+        <field type="BOOL" name="impervious" />
+        <pad bytes="3" />
+    </request>
+    
+    <!-- No events or errors -->
+
+</xcb>
diff --git a/libxcb/xcb-proto/src/xv.xml b/libxcb/xcb-proto/src/xv.xml
new file mode 100644
index 000000000..d2bfc2992
--- /dev/null
+++ b/libxcb/xcb-proto/src/xv.xml
@@ -0,0 +1,450 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xv" extension-xname="XVideo" extension-name="Xv" major-version="2" minor-version="2">
+    <import>xproto</import>
+    <import>shm</import>
+    <!-- Implements version 2.2 of XV -->
+
+    <!-- XIDs -->
+    <xidtype name="PORT" />
+    <xidtype name="ENCODING" />
+
+    <enum name="Type">
+        <item name="InputMask"><bit>0</bit></item>
+        <item name="OutputMask"><bit>1</bit></item>
+        <item name="VideoMask"><bit>2</bit></item>
+        <item name="StillMask"><bit>3</bit></item>
+        <item name="ImageMask"><bit>4</bit></item>
+    </enum>
+
+    <enum name="ImageFormatInfoType">
+        <item name="RGB" />
+        <item name="YUV" />
+    </enum>
+
+    <enum name="ImageFormatInfoFormat">
+        <item name="Packed" />
+        <item name="Planar" />
+    </enum>
+
+    <enum name="AttributeFlag">
+        <item name="Gettable"><bit>0</bit></item>
+        <item name="Settable"><bit>1</bit></item>
+    </enum>
+    
+    <enum name="VideoNotifyReason">
+	<item name="Started" />
+	<item name="Stopped" />
+	<item name="Busy" />
+	<item name="Preempted" />
+	<item name="HardError" />
+    </enum>
+
+    <enum name="ScanlineOrder">
+        <item name="TopToBottom" />
+        <item name="BottomToTop" />
+    </enum>
+
+    <enum name="GrabPortStatus">
+        <item name="Success" />
+        <item name="BadExtension" />
+        <item name="AlreadyGrabbed" />
+        <item name="InvalidTime" />
+        <item name="BadReply" />
+        <item name="BadAlloc" />
+    </enum>
+
+    <struct name="Rational">
+        <field type="INT32" name="numerator" />
+        <field type="INT32" name="denominator" />
+    </struct>
+
+    <struct name="Format">
+        <field type="VISUALID" name="visual" />
+        <field type="CARD8" name="depth" />
+        <pad bytes="3" />
+    </struct>
+
+    <struct name="AdaptorInfo">
+        <field type="PORT" name="base_id" />
+        <field type="CARD16" name="name_size" />
+        <field type="CARD16" name="num_ports" />
+        <field type="CARD16" name="num_formats" />
+        <field type="CARD8" name="type" mask="Type" />
+        <pad bytes="1" />
+        <list type="char" name="name">
+            <fieldref>name_size</fieldref>
+        </list>
+        <list type="Format" name="formats">
+            <fieldref>num_formats</fieldref>
+        </list>
+
+    </struct>
+
+    <struct name="EncodingInfo">
+        <field type="ENCODING" name="encoding" />
+        <field type="CARD16" name="name_size" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <!--
+        Some versions of Xvproto.h incorrectly have
+        this padding after "rate".
+        -->
+        <pad bytes="2" />
+        <field type="Rational" name="rate" />
+        <list type="char" name="name">
+            <fieldref>name_size</fieldref>
+        </list>
+    </struct>
+
+    <struct name="Image">
+        <field type="CARD32" name="id" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <field type="CARD32" name="data_size" />
+        <field type="CARD32" name="num_planes" />
+        <list type="CARD32" name="pitches">
+            <fieldref>num_planes</fieldref>
+        </list>
+        <list type="CARD32" name="offsets">
+            <fieldref>num_planes</fieldref>
+        </list>
+        <list type="CARD8" name="data">
+            <fieldref>data_size</fieldref>
+        </list>
+        <!-- Some XPointer "obdata" for SHM use-->
+    </struct>
+    
+    <struct name="AttributeInfo">
+        <field type="CARD32" name="flags" mask="AttributeFlag" />
+        <field type="INT32" name="min" />
+        <field type="INT32" name="max" />
+        <field type="CARD32" name="size" />
+        <list type="char" name="name">
+            <fieldref>size</fieldref>
+        </list>
+    </struct>
+
+    <struct name="ImageFormatInfo">
+        <field type="CARD32" name="id" />
+        <field type="CARD8" name="type" enum="ImageFormatInfoType" />
+        <field type="CARD8" name="byte_order" enum="ImageOrder" />
+        <pad bytes="2" />
+        <list type="CARD8" name="guid">
+            <value>16</value>
+        </list>
+        <field type="CARD8" name="bpp" />
+        <field type="CARD8" name="num_planes" />
+        <pad bytes="2" />
+        <field type="CARD8" name="depth" />
+        <pad bytes="3" />
+        <field type="CARD32" name="red_mask" />
+        <field type="CARD32" name="green_mask" />
+        <field type="CARD32" name="blue_mask" />
+        <field type="CARD8" name="format" enum="ImageFormatInfoFormat" />
+        <pad bytes="3" />
+        <field type="CARD32" name="y_sample_bits" />
+        <field type="CARD32" name="u_sample_bits" />
+        <field type="CARD32" name="v_sample_bits" />
+        <field type="CARD32" name="vhorz_y_period" />
+        <field type="CARD32" name="vhorz_u_period" />
+        <field type="CARD32" name="vhorz_v_period" />
+        <field type="CARD32" name="vvert_y_period" />
+        <field type="CARD32" name="vvert_u_period" />
+        <field type="CARD32" name="vvert_v_period" />
+        <list type="CARD8" name="vcomp_order">
+            <value>32</value>
+        </list>
+        <field type="CARD8" name="vscanline_order" enum="ScanlineOrder" />
+        <pad bytes="11" />
+    </struct>
+
+
+    <!-- Errors -->
+    <error name="BadPort" number="0"/>
+    <error name="BadEncoding" number="1"/>
+    <error name="BadControl" number="2"/>
+
+    <!-- Events -->
+    <event name="VideoNotify" number="0">
+        <field type="BYTE" name="reason" enum="VideoNotifyReason" />
+        <field type="TIMESTAMP" name="time" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="PORT" name="port" />
+    </event>
+
+    <event name="PortNotify" number="1">
+        <pad bytes="1" />
+        <field type="TIMESTAMP" name="time" />
+        <field type="PORT" name="port" />
+        <field type="ATOM" name="attribute" />
+        <field type="INT32" name="value" />
+    </event>
+    
+    
+    <!-- Requests -->
+    <request name="QueryExtension" opcode="0">
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="major" />
+            <field type="CARD16" name="minor" />
+        </reply>
+    </request>
+
+    <request name="QueryAdaptors" opcode="1">
+        <field type="WINDOW" name="window" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="num_adaptors" />
+            <pad bytes="22" />
+            <list type="AdaptorInfo" name="info">
+                <fieldref>num_adaptors</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="QueryEncodings" opcode="2">
+        <field type="PORT" name="port" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="num_encodings" />
+            <!--
+            In Xvproto.h this padding is 24 bytes
+            in actuality it is 22 bytes
+            -->
+            <pad bytes="22" />
+            <list type="EncodingInfo" name="info">
+                <fieldref>num_encodings</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="GrabPort" opcode="3">
+        <field type="PORT" name="port" />
+        <field type="TIMESTAMP" name="time" altenum="Time" />
+        <reply>
+            <field type="BYTE" name="result" enum="GrabPortStatus" />
+        </reply>
+    </request>
+
+    <request name="UngrabPort" opcode="4">
+        <field type="PORT" name="port" />
+        <field type="TIMESTAMP" name="time" altenum="Time" />
+    </request>
+
+    <request name="PutVideo" opcode="5">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="INT16" name="vid_x" />
+        <field type="INT16" name="vid_y" />
+        <field type="CARD16" name="vid_w" />
+        <field type="CARD16" name="vid_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+    </request>
+
+    <request name="PutStill" opcode="6">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="INT16" name="vid_x" />
+        <field type="INT16" name="vid_y" />
+        <field type="CARD16" name="vid_w" />
+        <field type="CARD16" name="vid_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+    </request>
+
+    <request name="GetVideo" opcode="7">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="INT16" name="vid_x" />
+        <field type="INT16" name="vid_y" />
+        <field type="CARD16" name="vid_w" />
+        <field type="CARD16" name="vid_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+    </request>
+
+    <request name="GetStill" opcode="8">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="INT16" name="vid_x" />
+        <field type="INT16" name="vid_y" />
+        <field type="CARD16" name="vid_w" />
+        <field type="CARD16" name="vid_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+    </request>
+
+    <request name="StopVideo" opcode="9">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+    </request>
+
+    <request name="SelectVideoNotify" opcode="10">
+        <field type="DRAWABLE" name="drawable" />
+        <field type="BOOL" name="onoff" />
+        <pad bytes="3" />
+    </request>
+
+    <request name="SelectPortNotify" opcode="11">
+        <field type="PORT" name="port" />
+        <field type="BOOL" name="onoff" />
+        <pad bytes="3" />
+    </request>
+
+    <request name="QueryBestSize" opcode="12">
+        <field type="PORT" name="port" />
+        <field type="CARD16" name="vid_w" />
+        <field type="CARD16" name="vid_h" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+        <field type="BOOL" name="motion" />
+        <pad bytes="3" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="actual_width" />
+            <field type="CARD16" name="actual_height" />
+        </reply>
+    </request>
+
+    <request name="SetPortAttribute" opcode="13">
+        <field type="PORT" name="port" />
+        <field type="ATOM" name="attribute" />
+        <field type="INT32" name="value" />
+    </request>
+
+    <request name="GetPortAttribute" opcode="14">
+        <field type="PORT" name="port" />
+        <field type="ATOM" name="attribute" />
+        <reply>
+            <pad bytes="1" />
+            <field type="INT32" name="value" />
+        </reply>
+    </request>
+
+    <!-- Not in the docs beyond this point :( -->
+
+    <request name="QueryPortAttributes" opcode="15">
+        <field type="PORT" name="port" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num_attributes" />
+            <field type="CARD32" name="text_size" />
+            <pad bytes="16" />
+            <list type="AttributeInfo" name="attributes">
+                <fieldref>num_attributes</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="ListImageFormats" opcode="16">
+        <field type="PORT" name="port" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num_formats" />
+            <pad bytes="20" />
+            <list type="ImageFormatInfo" name="format">
+                <fieldref>num_formats</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="QueryImageAttributes" opcode="17">
+        <field type="PORT" name="port" />
+        <field type="CARD32" name="id" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num_planes" />
+            <field type="CARD32" name="data_size" />
+            <field type="CARD16" name="width" />
+            <field type="CARD16" name="height" />
+            <pad bytes="12" />
+            <list type="CARD32" name="pitches">
+                <fieldref>num_planes</fieldref>
+            </list>
+            <list type="CARD32" name="offsets">
+                <fieldref>num_planes</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="PutImage" opcode="18">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="CARD32" name="id" />
+        <field type="INT16" name="src_x" />
+        <field type="INT16" name="src_y" />
+        <field type="CARD16" name="src_w" />
+        <field type="CARD16" name="src_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+	<list type="CARD8" name="data" />
+    </request>
+
+    <request name="ShmPutImage" opcode="19">
+        <field type="PORT" name="port" />
+        <field type="DRAWABLE" name="drawable" />
+        <field type="GCONTEXT" name="gc" />
+        <field type="SEG" name="shmseg" />
+        <field type="CARD32" name="id" />
+        <field type="CARD32" name="offset" />
+        <field type="INT16" name="src_x" />
+        <field type="INT16" name="src_y" />
+        <field type="CARD16" name="src_w" />
+        <field type="CARD16" name="src_h" />
+        <field type="INT16" name="drw_x" />
+        <field type="INT16" name="drw_y" />
+        <field type="CARD16" name="drw_w" />
+        <field type="CARD16" name="drw_h" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <field type="CARD8" name="send_event" />
+        <pad bytes="3" />
+    </request>
+</xcb>
diff --git a/libxcb/xcb-proto/src/xvmc.xml b/libxcb/xcb-proto/src/xvmc.xml
new file mode 100644
index 000000000..ac80003f9
--- /dev/null
+++ b/libxcb/xcb-proto/src/xvmc.xml
@@ -0,0 +1,146 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+Copyright (C) 2006 Jeremy Kolb.
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the names of the authors or their
+institutions shall not be used in advertising or otherwise to promote the
+sale, use or other dealings in this Software without prior written
+authorization from the authors.
+-->
+
+<xcb header="xvmc" extension-xname="XVideo-MotionCompensation" extension-name="XvMC" major-version="1" minor-version="1">
+    <import>xv</import>
+
+    <xidtype name="CONTEXT" />
+    <xidtype name="SURFACE" />
+    <xidtype name="SUBPICTURE" />
+
+    <struct name="SurfaceInfo">
+        <field type="SURFACE" name="id" />
+        <field type="CARD16" name="chroma_format" />
+        <field type="CARD16" name="pad0" />
+        <field type="CARD16" name="max_width" />
+        <field type="CARD16" name="max_height" />
+        <field type="CARD16" name="subpicture_max_width" />
+        <field type="CARD16" name="subpicture_max_height" />
+        <field type="CARD32" name="mc_type" />
+        <field type="CARD32" name="flags" />
+    </struct>
+    
+    <request name="QueryVersion" opcode="0"> 
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="major" />
+            <field type="CARD32" name="minor" />
+        </reply>
+    </request> 
+
+    <request name="ListSurfaceTypes" opcode="1">
+        <field type="PORT" name="port_id" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num" />
+            <pad bytes="20" />
+            <list type="SurfaceInfo" name="surfaces">
+                <fieldref>num</fieldref>
+            </list>
+        </reply>
+    </request>
+
+    <request name="CreateContext" opcode="2">
+        <field type="CONTEXT" name="context_id" />
+        <field type="PORT" name="port_id" />
+        <field type="SURFACE" name="surface_id" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <field type="CARD32" name="flags" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="width_actual" />
+            <field type="CARD16" name="height_actual" />
+            <field type="CARD32" name="flags_return" />
+            <pad bytes="20" />
+            <list type="CARD32" name="priv_data">
+		<fieldref>length</fieldref>
+	    </list>
+        </reply>
+    </request>
+
+    <request name="DestroyContext" opcode="3">
+        <field type="CONTEXT" name="context_id" />
+    </request>
+    
+    <request name="CreateSurface" opcode="4">
+        <field type="SURFACE" name="surface_id" />
+        <field type="CONTEXT" name="context_id" />
+        <reply>
+            <pad bytes="1" />
+            <pad bytes="24" />
+            <list type="CARD32" name="priv_data">
+		<fieldref>length</fieldref>
+	    </list>
+        </reply>
+    </request>
+
+    <request name="DestroySurface" opcode="5">
+        <field type="SURFACE" name="surface_id" />
+    </request>
+
+    <request name="CreateSubpicture" opcode="6">
+        <field type="SUBPICTURE" name="subpicture_id" />
+        <field type="CONTEXT" name="context" />
+        <field type="CARD32" name="xvimage_id" />
+        <field type="CARD16" name="width" />
+        <field type="CARD16" name="height" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD16" name="width_actual" />
+            <field type="CARD16" name="height_actual" />
+            <field type="CARD16" name="num_palette_entries" />
+            <field type="CARD16" name="entry_bytes" />
+            <list type="CARD8" name="component_order">
+                <value>4</value>
+            </list>
+            <pad bytes="12" />
+            <list type="CARD32" name="priv_data">
+		<fieldref>length</fieldref>
+	    </list>
+        </reply>
+    </request>
+
+    <request name="DestroySubpicture" opcode="7">
+        <field type="SUBPICTURE" name="subpicture_id" />
+    </request>
+
+    <request name="ListSubpictureTypes" opcode="8">
+        <field type="PORT" name="port_id" />
+        <field type="SURFACE" name="surface_id" />
+        <reply>
+            <pad bytes="1" />
+            <field type="CARD32" name="num" />
+            <pad bytes="20" />
+            <list type="ImageFormatInfo" name="types">
+                <fieldref>num</fieldref>
+            </list>
+        </reply>    
+    </request>
+
+</xcb> 
diff --git a/libxcb/xcb-proto/xcb-proto.pc.in b/libxcb/xcb-proto/xcb-proto.pc.in
new file mode 100644
index 000000000..6cbcf2779
--- /dev/null
+++ b/libxcb/xcb-proto/xcb-proto.pc.in
@@ -0,0 +1,9 @@
+prefix=@prefix@
+datarootdir=@datarootdir@
+datadir=@datadir@
+xcbincludedir=@xcbincludedir@
+pythondir=@pythondir@
+
+Name: XCB Proto
+Description: X protocol descriptions for XCB
+Version: @PACKAGE_VERSION@
diff --git a/libxcb/xcb-proto/xcbgen/Makefile.am b/libxcb/xcb-proto/xcbgen/Makefile.am
new file mode 100644
index 000000000..110a992f1
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/Makefile.am
@@ -0,0 +1,3 @@
+pkgpythondir = $(pythondir)/xcbgen
+
+pkgpython_PYTHON = __init__.py error.py expr.py matcher.py state.py xtypes.py
diff --git a/libxcb/xcb-proto/xcbgen/Makefile.in b/libxcb/xcb-proto/xcbgen/Makefile.in
new file mode 100644
index 000000000..14d4ba311
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/Makefile.in
@@ -0,0 +1,329 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = xcbgen
+DIST_COMMON = $(pkgpython_PYTHON) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(pkgpythondir)"
+pkgpythonPYTHON_INSTALL = $(INSTALL_DATA)
+py_compile = $(top_srcdir)/py-compile
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PYTHON = @PYTHON@
+PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
+PYTHON_PLATFORM = @PYTHON_PLATFORM@
+PYTHON_PREFIX = @PYTHON_PREFIX@
+PYTHON_VERSION = @PYTHON_VERSION@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+XMLLINT = @XMLLINT@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgpyexecdir = @pkgpyexecdir@
+pkgpythondir = $(pythondir)/xcbgen
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+pyexecdir = @pyexecdir@
+pythondir = @pythondir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xcbincludedir = @xcbincludedir@
+pkgpython_PYTHON = __init__.py error.py expr.py matcher.py state.py xtypes.py
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  xcbgen/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  xcbgen/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-pkgpythonPYTHON: $(pkgpython_PYTHON)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgpythondir)" || $(MKDIR_P) "$(DESTDIR)$(pkgpythondir)"
+	@list='$(pkgpython_PYTHON)'; dlist=''; for p in $$list; do\
+	  if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \
+	  if test -f $$b$$p; then \
+	    f=$(am__strip_dir) \
+	    dlist="$$dlist $$f"; \
+	    echo " $(pkgpythonPYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(pkgpythondir)/$$f'"; \
+	    $(pkgpythonPYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(pkgpythondir)/$$f"; \
+	  else :; fi; \
+	done; \
+	if test -n "$$dlist"; then \
+	  if test -z "$(DESTDIR)"; then \
+	    PYTHON=$(PYTHON) $(py_compile) --basedir "$(pkgpythondir)" $$dlist; \
+	  else \
+	    PYTHON=$(PYTHON) $(py_compile) --destdir "$(DESTDIR)" --basedir "$(pkgpythondir)" $$dlist; \
+	  fi; \
+	else :; fi
+
+uninstall-pkgpythonPYTHON:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgpython_PYTHON)'; dlist=''; for p in $$list; do\
+	  f=$(am__strip_dir) \
+	  rm -f "$(DESTDIR)$(pkgpythondir)/$$f"; \
+	  rm -f "$(DESTDIR)$(pkgpythondir)/$${f}c"; \
+	  rm -f "$(DESTDIR)$(pkgpythondir)/$${f}o"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+	for dir in "$(DESTDIR)$(pkgpythondir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-pkgpythonPYTHON
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-pkgpythonPYTHON
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgpythonPYTHON install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+	uninstall-am uninstall-pkgpythonPYTHON
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libxcb/xcb-proto/xcbgen/__init__.py b/libxcb/xcb-proto/xcbgen/__init__.py
new file mode 100644
index 000000000..8b1378917
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/__init__.py
@@ -0,0 +1 @@
+
diff --git a/libxcb/xcb-proto/xcbgen/error.py b/libxcb/xcb-proto/xcbgen/error.py
new file mode 100644
index 000000000..bbcd5013d
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/error.py
@@ -0,0 +1,5 @@
+class ResolveException(Exception):
+    '''
+    Gets thrown when a type doesn't resolve in the XML.
+    '''
+    pass
diff --git a/libxcb/xcb-proto/xcbgen/expr.py b/libxcb/xcb-proto/xcbgen/expr.py
new file mode 100644
index 000000000..522e17d09
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/expr.py
@@ -0,0 +1,88 @@
+'''
+This module contains helper classes for structure fields and length expressions.
+'''
+class Field(object):
+    '''
+    Represents a field of a structure.
+
+    type is the datatype object for the field.
+    field_type is the name of the type (string tuple)
+    field_name is the name of the structure field.
+    visible is true iff the field should be in the request API.
+    wire is true iff the field should be in the request structure.
+    auto is true iff the field is on the wire but not in the request API (e.g. opcode)
+    '''
+    def __init__(self, type, field_type, field_name, visible, wire, auto):
+        self.type = type
+        self.field_type = field_type
+        self.field_name = field_name
+        self.visible = visible
+        self.wire = wire
+        self.auto = auto
+
+
+class Expression(object):
+    '''
+    Represents a mathematical expression for a list length or exprfield.
+
+    Public fields:
+    op is the operation (text +,*,/,<<) or None.
+    lhs and rhs are the sub-Expressions if op is set.
+    lenfield_name is the name of the length field, or None for request lists.
+    lenfield is the Field object for the length field, or None.
+    bitfield is True if the length field is a bitmask instead of a number.
+    nmemb is the fixed size (value)of the expression, or None
+    '''
+    def __init__(self, elt, parent):
+        self.parent = parent
+
+        self.nmemb = None
+
+        self.lenfield_name = None
+        self.lenfield_type = None
+        self.lenfield = None
+        self.lenwire = False
+        self.bitfield = False
+
+        self.op = None
+        self.lhs = None
+        self.rhs = None
+
+        if elt.tag == 'list':
+            # List going into a request, which has no length field (inferred by server)
+            self.lenfield_name = elt.get('name') + '_len'
+            self.lenfield_type = 'CARD32'
+
+        elif elt.tag == 'fieldref':
+            # Standard list with a fieldref
+            self.lenfield_name = elt.text
+
+        elif elt.tag == 'valueparam':
+            # Value-mask.  The length bitmask is described by attributes.
+            self.lenfield_name = elt.get('value-mask-name')
+            self.lenfield_type = elt.get('value-mask-type')
+            self.lenwire = True
+            self.bitfield = True
+
+        elif elt.tag == 'op':
+            # Op field.  Need to recurse.
+            self.op = elt.get('op')
+            self.lhs = Expression(list(elt)[0], parent)
+            self.rhs = Expression(list(elt)[1], parent)
+
+            # Hopefully we don't have two separate length fields...
+            self.lenfield_name = self.lhs.lenfield_name
+            if self.lenfield_name == None:
+                self.lenfield_name = self.rhs.lenfield_name
+
+        elif elt.tag == 'value':
+            # Constant expression
+            self.nmemb = int(elt.text)
+
+        else:
+            # Notreached
+            raise Exception('XXX')
+
+
+    def fixed_size(self):
+        return self.nmemb != None
diff --git a/libxcb/xcb-proto/xcbgen/matcher.py b/libxcb/xcb-proto/xcbgen/matcher.py
new file mode 100644
index 000000000..e7958fa44
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/matcher.py
@@ -0,0 +1,112 @@
+'''
+XML parser.  One function for each top-level element in the schema.
+
+Most functions just declare a new object and add it to the module.
+For typedefs, eventcopies, xidtypes, and other aliases though,
+we do not create a new type object, we just record the existing one under a new name.
+'''
+
+from os.path import join
+from xml.etree.cElementTree import parse
+
+import state
+from xtypes import *
+
+def import_(node, module, namespace):
+    '''
+    For imports, we load the file, create a new namespace object,
+    execute recursively, then record the import (for header files, etc.)
+    '''
+    new_file = join(namespace.dir, '%s.xml' % node.text)
+    new_root = parse(new_file).getroot()
+    new_namespace = state.Namespace(new_file)
+    execute(module, new_namespace)
+    if not module.has_import(node.text):
+        module.add_import(node.text, new_namespace)
+
+def typedef(node, module, namespace):
+    id = node.get('newname')
+    name = namespace.prefix + (id,)
+    type = module.get_type(node.get('oldname'))
+    module.add_type(id, namespace.ns, name, type)
+
+def xidtype(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = module.get_type('CARD32')
+    module.add_type(id, namespace.ns, name, type)
+
+def xidunion(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = module.get_type('CARD32')
+    module.add_type(id, namespace.ns, name, type)
+
+def enum(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = Enum(name, node)
+    module.add_type(id, namespace.ns, name, type)
+
+def struct(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = Struct(name, node)
+    module.add_type(id, namespace.ns, name, type)
+
+def union(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = Union(name, node)
+    module.add_type(id, namespace.ns, name, type)
+
+def request(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    type = Request(name, node)
+    module.add_request(id, name, type)
+
+def event(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    event = Event(name, node)
+    event.add_opcode(node.get('number'), name, True)
+    module.add_event(id, name, event)
+
+def eventcopy(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    event = module.get_event(node.get('ref'))
+    event.add_opcode(node.get('number'), name, False)
+    module.add_event(id, name, event)
+
+def error(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    error = Error(name, node)
+    error.add_opcode(node.get('number'), name, True)
+    module.add_error(id, name, error)
+
+def errorcopy(node, module, namespace):
+    id = node.get('name')
+    name = namespace.prefix + (id,)
+    error = module.get_error(node.get('ref'))
+    error.add_opcode(node.get('number'), name, False)
+    module.add_error(id, name, error)
+
+funcs = {'import' : import_,
+         'typedef' : typedef,
+         'xidtype' : xidtype,
+         'xidunion' : xidunion,
+         'enum' : enum,
+         'struct' : struct,
+         'union' : union,
+         'request' : request,
+         'event' : event,
+         'eventcopy' : eventcopy,
+         'error' : error,
+         'errorcopy' : errorcopy}
+
+def execute(module, namespace):
+    for elt in list(namespace.root):
+        funcs[elt.tag](elt, module, namespace)
diff --git a/libxcb/xcb-proto/xcbgen/state.py b/libxcb/xcb-proto/xcbgen/state.py
new file mode 100644
index 000000000..51efc9480
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/state.py
@@ -0,0 +1,166 @@
+'''
+This module contains the namespace class and the singleton module class.
+'''
+from os.path import dirname, basename
+from xml.etree.cElementTree import parse
+
+import matcher
+from error import *
+from xtypes import *
+
+import __main__
+
+class Namespace(object):
+    '''
+    Contains the naming information for an extension.
+
+    Public fields:
+
+    header is the header attribute ("header file" name).
+    is_ext is true for extensions, false for xproto.
+    major_version and minor_version are extension version info.
+    ext_xname is the X extension name string.
+    ext_name is the XCB extension name prefix.
+    '''
+    def __init__(self, filename):
+        # Path info
+        self.path = filename
+        self.dir = dirname(filename)
+        self.file = basename(filename)
+
+        # Parse XML
+        self.root = parse(filename).getroot()
+        self.header = self.root.get('header')
+        self.ns = self.header + ':'
+        
+        # Get root element attributes
+        if self.root.get('extension-xname', False): 
+            self.is_ext = True
+            self.major_version = self.root.get('major-version')
+            self.minor_version = self.root.get('minor-version')
+            self.ext_xname = self.root.get('extension-xname')
+            self.ext_name = self.root.get('extension-name')
+            self.prefix = ('xcb', self.ext_name)
+        else:
+            self.is_ext = False
+            self.ext_name = ''
+            self.prefix = ('xcb',)
+
+
+class Module(object):
+    '''
+    This is the grand, encompassing class that represents an entire XCB specification.
+    Only gets instantiated once, in the main() routine.
+
+    Don't need to worry about this much except to declare it and to get the namespace.
+
+    Public fields:
+    namespace contains the namespace info for the spec.
+    '''
+    open = __main__.output['open']
+    close = __main__.output['close']
+
+    def __init__(self, filename, output):
+        self.namespace = Namespace(filename)
+        self.output = output
+
+        self.imports = []
+        self.types = {}
+        self.events = {}
+        self.errors = {}
+        self.all = []
+
+        # Register some common types
+        self.add_type('CARD8', '', ('uint8_t',), tcard8)
+        self.add_type('CARD16', '', ('uint16_t',), tcard16)
+        self.add_type('CARD32', '', ('uint32_t',), tcard32)
+        self.add_type('INT8', '', ('int8_t',), tint8)
+        self.add_type('INT16', '', ('int16_t',), tint16)
+        self.add_type('INT32', '', ('int32_t',), tint32)
+        self.add_type('BYTE', '', ('uint8_t',), tcard8)
+        self.add_type('BOOL', '', ('uint8_t',), tcard8)
+        self.add_type('char', '', ('char',), tchar)
+        self.add_type('float', '', ('float',), tfloat)
+        self.add_type('double', '', ('double',), tdouble)
+        self.add_type('void', '', ('void',), tcard8)
+
+    # This goes out and parses the rest of the XML
+    def register(self):
+        matcher.execute(self, self.namespace)
+
+    # Recursively resolve all types
+    def resolve(self):
+        for (name, item) in self.all:
+            item.resolve(self)
+
+    # Call all the output methods
+    def generate(self):
+        self.open()
+
+        for (name, item) in self.all:
+            item.out(name)
+
+        self.close()
+
+    # Keeps track of what's been imported so far.
+    def add_import(self, name, namespace):
+        self.imports.append((name, namespace.header))
+
+    def has_import(self, name):
+        for (name_, header) in self.imports:
+            if name_ == name:
+                return True
+        return False
+
+    # Keeps track of non-request/event/error datatypes
+    def add_type(self, id, ns, name, item):
+        key = ns + id
+        if key in self.types:
+            return
+        self.types[key] = (name, item)
+        if name[:-1] == self.namespace.prefix:
+            self.all.append((name, item))
+
+    def get_type_impl(self, id, idx):
+        key = id
+        if key in self.types:
+            return self.types[key][idx]
+
+        key = self.namespace.ns + id
+        if key in self.types:
+            return self.types[key][idx]
+
+        for key in self.types.keys():
+            if key.rpartition(':')[2] == id:
+                return self.types[key][idx]
+
+        raise ResolveException('Type %s not found' % id)
+
+    def get_type(self, id):
+        return self.get_type_impl(id, 1)
+
+    def get_type_name(self, id):
+        return self.get_type_impl(id, 0)
+
+    # Keeps track of request datatypes
+    def add_request(self, id, name, item):
+        if name[:-1] == self.namespace.prefix:
+            self.all.append((name, item))
+
+    # Keeps track of event datatypes
+    def add_event(self, id, name, item):
+        self.events[id] = (name, item)
+        if name[:-1] == self.namespace.prefix:
+            self.all.append((name, item))
+
+    def get_event(self, id):
+        return self.events[id][1]
+
+    # Keeps track of error datatypes
+    def add_error(self, id, name, item):
+        self.errors[id] = (name, item)
+        if name[:-1] == self.namespace.prefix:
+            self.all.append((name, item))
+
+    def get_error(self, id):
+        return self.errors[id][1]
diff --git a/libxcb/xcb-proto/xcbgen/xtypes.py b/libxcb/xcb-proto/xcbgen/xtypes.py
new file mode 100644
index 000000000..30617b8f4
--- /dev/null
+++ b/libxcb/xcb-proto/xcbgen/xtypes.py
@@ -0,0 +1,491 @@
+'''
+This module contains the classes which represent XCB data types.
+'''
+from expr import Field, Expression
+import __main__
+
+class Type(object):
+    '''
+    Abstract base class for all XCB data types.
+    Contains default fields, and some abstract methods.
+    '''
+    def __init__(self, name):
+        '''
+        Default structure initializer.  Sets up default fields.
+
+        Public fields:
+        name is a tuple of strings specifying the full type name.
+        size is the size of the datatype in bytes, or None if variable-sized.
+        nmemb is 1 for non-list types, None for variable-sized lists, otherwise number of elts.
+        booleans for identifying subclasses, because I can't figure out isinstance().
+        '''
+        self.name = name
+        self.size = None
+        self.nmemb = None
+        self.resolved = False
+
+        # Screw isinstance().
+        self.is_simple = False
+        self.is_list = False
+        self.is_expr = False
+        self.is_container = False
+        self.is_reply = False
+        self.is_union = False
+        self.is_pad = False
+
+    def resolve(self, module):
+        '''
+        Abstract method for resolving a type.
+        This should make sure any referenced types are already declared.
+        '''
+        raise Exception('abstract resolve method not overridden!')
+
+    def out(self, name):
+        '''
+        Abstract method for outputting code.
+        These are declared in the language-specific modules, and
+        there must be a dictionary containing them declared when this module is imported!
+        '''
+        raise Exception('abstract out method not overridden!')
+
+    def fixed_size(self):
+        '''
+        Abstract method for determining if the data type is fixed-size.
+        '''
+        raise Exception('abstract fixed_size method not overridden!')
+
+    def make_member_of(self, module, complex_type, field_type, field_name, visible, wire, auto):
+        '''
+        Default method for making a data type a member of a structure.
+        Extend this if the data type needs to add an additional length field or something.
+
+        module is the global module object.
+        complex_type is the structure object.
+        see Field for the meaning of the other parameters.
+        '''
+        new_field = Field(self, field_type, field_name, visible, wire, auto)
+
+        # We dump the _placeholder_byte if any fields are added.
+        for (idx, field) in enumerate(complex_type.fields):
+            if field == _placeholder_byte:
+                complex_type.fields[idx] = new_field
+                return
+
+        complex_type.fields.append(new_field)
+
+class SimpleType(Type):
+    '''
+    Derived class which represents a cardinal type like CARD32 or char.
+    Any type which is typedef'ed to cardinal will be one of these.
+
+    Public fields added:
+    none
+    '''
+    def __init__(self, name, size):
+        Type.__init__(self, name)
+        self.is_simple = True
+        self.size = size
+        self.nmemb = 1
+
+    def resolve(self, module):
+        self.resolved = True
+
+    def fixed_size(self):
+        return True
+
+    out = __main__.output['simple']
+
+
+# Cardinal datatype globals.  See module __init__ method.
+tcard8 = SimpleType(('uint8_t',), 1)
+tcard16 = SimpleType(('uint16_t',), 2)
+tcard32 = SimpleType(('uint32_t',), 4)
+tint8 =  SimpleType(('int8_t',), 1)
+tint16 = SimpleType(('int16_t',), 2)
+tint32 = SimpleType(('int32_t',), 4)
+tchar =  SimpleType(('char',), 1)
+tfloat = SimpleType(('float',), 4)
+tdouble = SimpleType(('double',), 8)
+
+
+class Enum(SimpleType):
+    '''
+    Derived class which represents an enum.  Fixed-size.
+
+    Public fields added:
+    values contains a list of (name, value) tuples.  value is empty, or a number.
+    bits contains a list of (name, bitnum) tuples.  items only appear if specified as a bit. bitnum is a number.
+    '''
+    def __init__(self, name, elt):
+        SimpleType.__init__(self, name, 4)
+        self.values = []
+        self.bits = []
+        for item in list(elt):
+            # First check if we're using a default value
+            if len(list(item)) == 0:
+                self.values.append((item.get('name'), ''))
+                continue
+
+            # An explicit value or bit was specified.
+            value = list(item)[0]
+            if value.tag == 'value':
+                self.values.append((item.get('name'), value.text))
+            elif value.tag == 'bit':
+                self.values.append((item.get('name'), '%u' % (1 << int(value.text))))
+                self.bits.append((item.get('name'), value.text))
+
+    def resolve(self, module):
+        self.resolved = True
+
+    def fixed_size(self):
+        return True
+
+    out = __main__.output['enum']
+
+
+class ListType(Type):
+    '''
+    Derived class which represents a list of some other datatype.  Fixed- or variable-sized.
+
+    Public fields added:
+    member is the datatype of the list elements.
+    parent is the structure type containing the list.
+    expr is an Expression object containing the length information, for variable-sized lists.
+    '''
+    def __init__(self, elt, member, parent):
+        Type.__init__(self, member.name)
+        self.is_list = True
+        self.member = member
+        self.parent = parent
+
+        if elt.tag == 'list':
+            elts = list(elt)
+            self.expr = Expression(elts[0] if len(elts) else elt, self)
+        elif elt.tag == 'valueparam':
+            self.expr = Expression(elt, self)
+
+        self.size = member.size if member.fixed_size() else None
+        self.nmemb = self.expr.nmemb if self.expr.fixed_size() else None
+
+    def make_member_of(self, module, complex_type, field_type, field_name, visible, wire, auto):
+        if not self.fixed_size():
+            # We need a length field.
+            # Ask our Expression object for it's name, type, and whether it's on the wire.
+            lenfid = self.expr.lenfield_type
+            lenfield_name = self.expr.lenfield_name
+            lenwire = self.expr.lenwire
+            needlen = True
+
+            # See if the length field is already in the structure.
+            for field in self.parent.fields:
+                if field.field_name == lenfield_name:
+                    needlen = False
+
+            # It isn't, so we need to add it to the structure ourself.
+            if needlen:
+                type = module.get_type(lenfid)
+                lenfield_type = module.get_type_name(lenfid)
+                type.make_member_of(module, complex_type, lenfield_type, lenfield_name, True, lenwire, False)
+
+        # Add ourself to the structure by calling our original method.
+        Type.make_member_of(self, module, complex_type, field_type, field_name, visible, wire, auto)
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+        self.member.resolve(module)
+
+        # Find my length field again.  We need the actual Field object in the expr.
+        # This is needed because we might have added it ourself above.
+        if not self.fixed_size():
+            for field in self.parent.fields:
+                if field.field_name == self.expr.lenfield_name and field.wire:
+                    self.expr.lenfield = field
+                    break
+            
+        self.resolved = True
+
+    def fixed_size(self):
+        return self.member.fixed_size() and self.expr.fixed_size()
+
+class ExprType(Type):
+    '''
+    Derived class which represents an exprfield.  Fixed size.
+
+    Public fields added:
+    expr is an Expression object containing the value of the field.
+    '''
+    def __init__(self, elt, member, parent):
+        Type.__init__(self, member.name)
+        self.is_expr = True
+        self.member = member
+        self.parent = parent
+
+        self.expr = Expression(list(elt)[0], self)
+
+        self.size = member.size
+        self.nmemb = 1
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+        self.member.resolve(module)
+        self.resolved = True
+
+    def fixed_size(self):
+        return True
+
+class SizedPadType(Type):
+    '''
+    Derived class which represents a padding field of given size.
+    '''
+    def __init__(self, size):
+        Type.__init__(self, tcard8.name)
+        self.is_pad = True
+        self.size = 1
+        self.nmemb = int(size)
+
+    def resolve(self, module):
+        self.resolved = True
+
+    def fixed_size(self):
+        return True
+
+class PadType(SizedPadType):
+    '''
+    Derived class which represents a padding field of given type.
+    '''
+    def __init__(self, elt):
+        self.nmemb = "1" if (elt == None) else elt.get('bytes')
+        SizedPadType.__init__(self, self.nmemb)
+    
+class ComplexType(Type):
+    '''
+    Derived class which represents a structure.  Base type for all structure types.
+
+    Public fields added:
+    fields is an array of Field objects describing the structure fields.
+    '''
+    def __init__(self, name, elt):
+        Type.__init__(self, name)
+        self.is_container = True
+        self.elt = elt
+        self.fields = []
+        self.nmemb = 1
+        self.size = 0
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+        pads = 0
+
+        # Resolve all of our field datatypes.
+        for child in list(self.elt):
+            value_mask_pad = None
+            if child.tag == 'pad':
+                field_name = 'pad' + str(pads)
+                fkey = 'CARD8'
+                type = PadType(child)
+                pads = pads + 1
+                visible = False
+            elif child.tag == 'field':
+                field_name = child.get('name')
+                fkey = child.get('type')
+                type = module.get_type(fkey)
+                visible = True
+            elif child.tag == 'exprfield':
+                field_name = child.get('name')
+                fkey = child.get('type')
+                type = ExprType(child, module.get_type(fkey), self)
+                visible = False
+            elif child.tag == 'list':
+                field_name = child.get('name')
+                fkey = child.get('type')
+                type = ListType(child, module.get_type(fkey), self)
+                visible = True
+            elif child.tag == 'valueparam':
+                field_name = child.get('value-list-name')
+                fkey = 'CARD32'
+                type = ListType(child, module.get_type(fkey), self)
+                visible = True
+                value_mask_pad = child.get('value-mask-pad')
+            else:
+                # Hit this on Reply
+                continue 
+
+            # Get the full type name for the field
+            field_type = module.get_type_name(fkey)
+            # Add the field to ourself
+            type.make_member_of(module, self, field_type, field_name, visible, True, False)
+            # Recursively resolve the type (could be another structure, list)
+            type.resolve(module)
+
+            # Add a value-mask-pad if necessary
+            if value_mask_pad != None:
+                vmp_field_name = 'pad' + str(pads)
+                vmp_fkey = 'CARD8'
+                vmp_type = SizedPadType(value_mask_pad)
+                pads = pads + 1
+                vmp_visible = False
+                vmp_field_type = module.get_type_name(vmp_fkey)
+                vmp_type.make_member_of(module, self, vmp_field_type, vmp_field_name, vmp_visible, True, False)
+                vmp_type.resolve(module)
+
+        self.calc_size() # Figure out how big we are
+        self.resolved = True
+
+    def calc_size(self):
+        self.size = 0
+        for m in self.fields:
+            if not m.wire:
+                continue
+            if m.type.fixed_size():
+                self.size = self.size + (m.type.size * m.type.nmemb)
+            else:
+                self.size = None
+                break
+
+    def fixed_size(self):
+        for m in self.fields:
+            if not m.type.fixed_size():
+                return False
+        return True
+
+
+class Struct(ComplexType):
+    '''
+    Derived class representing a struct data type.
+    '''
+    out = __main__.output['struct']
+
+
+class Union(ComplexType):
+    '''
+    Derived class representing a union data type.
+    '''
+    def __init__(self, name, elt):
+        ComplexType.__init__(self, name, elt)
+        self.is_union = True
+
+    out = __main__.output['union']
+
+
+class Reply(ComplexType):
+    '''
+    Derived class representing a reply.  Only found as a field of Request.
+    '''
+    def __init__(self, name, elt):
+        ComplexType.__init__(self, name, elt)
+        self.is_reply = True
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+        # Add the automatic protocol fields
+        self.fields.append(Field(tcard8, tcard8.name, 'response_type', False, True, True))
+        self.fields.append(_placeholder_byte)
+        self.fields.append(Field(tcard16, tcard16.name, 'sequence', False, True, True))
+        self.fields.append(Field(tcard32, tcard32.name, 'length', False, True, True))
+        ComplexType.resolve(self, module)
+        
+
+class Request(ComplexType):
+    '''
+    Derived class representing a request.
+
+    Public fields added:
+    reply contains the reply datatype or None for void requests.
+    opcode contains the request number.
+    '''
+    def __init__(self, name, elt):
+        ComplexType.__init__(self, name, elt)
+        self.reply = None
+        self.opcode = elt.get('opcode')
+
+        for child in list(elt):
+            if child.tag == 'reply':
+                self.reply = Reply(name, child)
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+        # Add the automatic protocol fields
+        if module.namespace.is_ext:
+            self.fields.append(Field(tcard8, tcard8.name, 'major_opcode', False, True, True))
+            self.fields.append(Field(tcard8, tcard8.name, 'minor_opcode', False, True, True))
+            self.fields.append(Field(tcard16, tcard16.name, 'length', False, True, True))
+            ComplexType.resolve(self, module)
+        else:
+            self.fields.append(Field(tcard8, tcard8.name, 'major_opcode', False, True, True))
+            self.fields.append(_placeholder_byte)
+            self.fields.append(Field(tcard16, tcard16.name, 'length', False, True, True))
+            ComplexType.resolve(self, module)
+
+        if self.reply:
+            self.reply.resolve(module)
+
+    out = __main__.output['request']
+
+
+class Event(ComplexType):
+    '''
+    Derived class representing an event data type.
+
+    Public fields added:
+    opcodes is a dictionary of name -> opcode number, for eventcopies.
+    '''
+    def __init__(self, name, elt):
+        ComplexType.__init__(self, name, elt)
+        self.opcodes = {}
+
+        tmp = elt.get('no-sequence-number')
+        self.has_seq = (tmp == None or tmp.lower() == 'false' or tmp == '0')
+            
+    def add_opcode(self, opcode, name, main):
+        self.opcodes[name] = opcode
+        if main:
+            self.name = name
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+
+        # Add the automatic protocol fields
+        self.fields.append(Field(tcard8, tcard8.name, 'response_type', False, True, True))
+        if self.has_seq:
+            self.fields.append(_placeholder_byte)
+            self.fields.append(Field(tcard16, tcard16.name, 'sequence', False, True, True))
+        ComplexType.resolve(self, module)
+
+    out = __main__.output['event']
+
+
+class Error(ComplexType):
+    '''
+    Derived class representing an error data type.
+
+    Public fields added:
+    opcodes is a dictionary of name -> opcode number, for errorcopies.
+    '''
+    def __init__(self, name, elt):
+        ComplexType.__init__(self, name, elt)
+        self.opcodes = {}
+
+    def add_opcode(self, opcode, name, main):
+        self.opcodes[name] = opcode
+        if main:
+            self.name = name
+
+    def resolve(self, module):
+        if self.resolved:
+            return
+
+        # Add the automatic protocol fields
+        self.fields.append(Field(tcard8, tcard8.name, 'response_type', False, True, True))
+        self.fields.append(Field(tcard8, tcard8.name, 'error_code', False, True, True))
+        self.fields.append(Field(tcard16, tcard16.name, 'sequence', False, True, True))
+        ComplexType.resolve(self, module)
+
+    out = __main__.output['error']
+
+_placeholder_byte = Field(PadType(None), tcard8.name, 'pad0', False, True, False)