Added MesaLib-7.6

1 files changed, 338 insertions, 0 deletions

diff --git a/mesalib/progs/util/trackball.c b/mesalib/progs/util/trackball.c
new file mode 100644
index 000000000..a6c4c60d0
--- /dev/null
+++ b/mesalib/progs/util/trackball.c
@@ -0,0 +1,338 @@
+#include <stdio.h>
+/*
+ * (c) Copyright 1993, 1994, Silicon Graphics, Inc.
+ * ALL RIGHTS RESERVED
+ * Permission to use, copy, modify, and distribute this software for
+ * any purpose and without fee is hereby granted, provided that the above
+ * copyright notice appear in all copies and that both the copyright notice
+ * and this permission notice appear in supporting documentation, and that
+ * the name of Silicon Graphics, Inc. not be used in advertising
+ * or publicity pertaining to distribution of the software without specific,
+ * written prior permission.
+ *
+ * THE MATERIAL EMBODIED ON THIS SOFTWARE IS PROVIDED TO YOU "AS-IS"
+ * AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE,
+ * INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
+ * FITNESS FOR A PARTICULAR PURPOSE.  IN NO EVENT SHALL SILICON
+ * GRAPHICS, INC.  BE LIABLE TO YOU OR ANYONE ELSE FOR ANY DIRECT,
+ * SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY
+ * KIND, OR ANY DAMAGES WHATSOEVER, INCLUDING WITHOUT LIMITATION,
+ * LOSS OF PROFIT, LOSS OF USE, SAVINGS OR REVENUE, OR THE CLAIMS OF
+ * THIRD PARTIES, WHETHER OR NOT SILICON GRAPHICS, INC.  HAS BEEN
+ * ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE
+ * POSSESSION, USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * US Government Users Restricted Rights
+ * Use, duplication, or disclosure by the Government is subject to
+ * restrictions set forth in FAR 52.227.19(c)(2) or subparagraph
+ * (c)(1)(ii) of the Rights in Technical Data and Computer Software
+ * clause at DFARS 252.227-7013 and/or in similar or successor
+ * clauses in the FAR or the DOD or NASA FAR Supplement.
+ * Unpublished-- rights reserved under the copyright laws of the
+ * United States.  Contractor/manufacturer is Silicon Graphics,
+ * Inc., 2011 N.  Shoreline Blvd., Mountain View, CA 94039-7311.
+ *
+ * OpenGL(TM) is a trademark of Silicon Graphics, Inc.
+ */
+/*
+ * Trackball code:
+ *
+ * Implementation of a virtual trackball.
+ * Implemented by Gavin Bell, lots of ideas from Thant Tessman and
+ *   the August '88 issue of Siggraph's "Computer Graphics," pp. 121-129.
+ *
+ * Vector manip code:
+ *
+ * Original code from:
+ * David M. Ciemiewicz, Mark Grossman, Henry Moreton, and Paul Haeberli
+ *
+ * Much mucking with by:
+ * Gavin Bell
+ */
+#if defined(_WIN32)
+#pragma warning (disable:4244)          /* disable bogus conversion warnings */
+#endif
+#include <math.h>
+#include "trackball.h"
+
+/*
+ * This size should really be based on the distance from the center of
+ * rotation to the point on the object underneath the mouse.  That
+ * point would then track the mouse as closely as possible.  This is a
+ * simple example, though, so that is left as an Exercise for the
+ * Programmer.
+ */
+#define TRACKBALLSIZE  (0.8f)
+
+/*
+ * Local function prototypes (not defined in trackball.h)
+ */
+static float tb_project_to_sphere(float, float, float);
+static void normalize_quat(float [4]);
+
+static void
+vzero(float v[3])
+{
+    v[0] = 0.0;
+    v[1] = 0.0;
+    v[2] = 0.0;
+}
+
+static void
+vset(float v[3], float x, float y, float z)
+{
+    v[0] = x;
+    v[1] = y;
+    v[2] = z;
+}
+
+static void
+vsub(const float src1[3], const float src2[3], float dst[3])
+{
+    dst[0] = src1[0] - src2[0];
+    dst[1] = src1[1] - src2[1];
+    dst[2] = src1[2] - src2[2];
+}
+
+static void
+vcopy(const float v1[3], float v2[3])
+{
+    register int i;
+    for (i = 0 ; i < 3 ; i++)
+        v2[i] = v1[i];
+}
+
+static void
+vcross(const float v1[3], const float v2[3], float cross[3])
+{
+    float temp[3];
+
+    temp[0] = (v1[1] * v2[2]) - (v1[2] * v2[1]);
+    temp[1] = (v1[2] * v2[0]) - (v1[0] * v2[2]);
+    temp[2] = (v1[0] * v2[1]) - (v1[1] * v2[0]);
+    vcopy(temp, cross);
+}
+
+static float
+vlength(const float v[3])
+{
+    return sqrt(v[0] * v[0] + v[1] * v[1] + v[2] * v[2]);
+}
+
+static void
+vscale(float v[3], float div)
+{
+    v[0] *= div;
+    v[1] *= div;
+    v[2] *= div;
+}
+
+static void
+vnormal(float v[3])
+{
+    vscale(v,1.0/vlength(v));
+}
+
+static float
+vdot(const float v1[3], const float v2[3])
+{
+    return v1[0]*v2[0] + v1[1]*v2[1] + v1[2]*v2[2];
+}
+
+static void
+vadd(const float src1[3], const float src2[3], float dst[3])
+{
+    dst[0] = src1[0] + src2[0];
+    dst[1] = src1[1] + src2[1];
+    dst[2] = src1[2] + src2[2];
+}
+
+/*
+ * Ok, simulate a track-ball.  Project the points onto the virtual
+ * trackball, then figure out the axis of rotation, which is the cross
+ * product of P1 P2 and O P1 (O is the center of the ball, 0,0,0)
+ * Note:  This is a deformed trackball-- is a trackball in the center,
+ * but is deformed into a hyperbolic sheet of rotation away from the
+ * center.  This particular function was chosen after trying out
+ * several variations.
+ *
+ * It is assumed that the arguments to this routine are in the range
+ * (-1.0 ... 1.0)
+ */
+void
+trackball(float q[4], float p1x, float p1y, float p2x, float p2y)
+{
+    float a[3]; /* Axis of rotation */
+    float phi;  /* how much to rotate about axis */
+    float p1[3], p2[3], d[3];
+    float t;
+
+    if (p1x == p2x && p1y == p2y) {
+        /* Zero rotation */
+        vzero(q);
+        q[3] = 1.0;
+        return;
+    }
+
+    /*
+     * First, figure out z-coordinates for projection of P1 and P2 to
+     * deformed sphere
+     */
+    vset(p1,p1x,p1y,tb_project_to_sphere(TRACKBALLSIZE,p1x,p1y));
+    vset(p2,p2x,p2y,tb_project_to_sphere(TRACKBALLSIZE,p2x,p2y));
+
+    /*
+     *  Now, we want the cross product of P1 and P2
+     */
+    vcross(p2,p1,a);
+
+    /*
+     *  Figure out how much to rotate around that axis.
+     */
+    vsub(p1,p2,d);
+    t = vlength(d) / (2.0*TRACKBALLSIZE);
+
+    /*
+     * Avoid problems with out-of-control values...
+     */
+    if (t > 1.0) t = 1.0;
+    if (t < -1.0) t = -1.0;
+    phi = 2.0 * asin(t);
+
+    axis_to_quat(a,phi,q);
+}
+
+/*
+ *  Given an axis and angle, compute quaternion.
+ */
+void
+axis_to_quat(const float a[3], float phi, float q[4])
+{
+    vcopy(a,q);
+    vnormal(q);
+    vscale(q, sin(phi/2.0));
+    q[3] = cos(phi/2.0);
+}
+
+/*
+ * Project an x,y pair onto a sphere of radius r OR a hyperbolic sheet
+ * if we are away from the center of the sphere.
+ */
+static float
+tb_project_to_sphere(float r, float x, float y)
+{
+    float d, t, z;
+
+    d = sqrt(x*x + y*y);
+    if (d < r * 0.70710678118654752440) {    /* Inside sphere */
+        z = sqrt(r*r - d*d);
+    } else {           /* On hyperbola */
+        t = r / 1.41421356237309504880;
+        z = t*t / d;
+    }
+    return z;
+}
+
+/*
+ * Given two rotations, e1 and e2, expressed as quaternion rotations,
+ * figure out the equivalent single rotation and stuff it into dest.
+ *
+ * This routine also normalizes the result every RENORMCOUNT times it is
+ * called, to keep error from creeping in.
+ *
+ * NOTE: This routine is written so that q1 or q2 may be the same
+ * as dest (or each other).
+ */
+
+#define RENORMCOUNT 97
+
+void
+add_quats(const float q1[4], const float q2[4], float dest[4])
+{
+    static int count=0;
+    float t1[4], t2[4], t3[4];
+    float tf[4];
+
+#if 0
+printf("q1 = %f %f %f %f\n", q1[0], q1[1], q1[2], q1[3]);
+printf("q2 = %f %f %f %f\n", q2[0], q2[1], q2[2], q2[3]);
+#endif
+
+    vcopy(q1,t1);
+    vscale(t1,q2[3]);
+
+    vcopy(q2,t2);
+    vscale(t2,q1[3]);
+
+    vcross(q2,q1,t3);
+    vadd(t1,t2,tf);
+    vadd(t3,tf,tf);
+    tf[3] = q1[3] * q2[3] - vdot(q1,q2);
+
+#if 0
+printf("tf = %f %f %f %f\n", tf[0], tf[1], tf[2], tf[3]);
+#endif
+
+    dest[0] = tf[0];
+    dest[1] = tf[1];
+    dest[2] = tf[2];
+    dest[3] = tf[3];
+
+    if (++count > RENORMCOUNT) {
+        count = 0;
+        normalize_quat(dest);
+    }
+}
+
+/*
+ * Quaternions always obey:  a^2 + b^2 + c^2 + d^2 = 1.0
+ * If they don't add up to 1.0, dividing by their magnitued will
+ * renormalize them.
+ *
+ * Note: See the following for more information on quaternions:
+ *
+ * - Shoemake, K., Animating rotation with quaternion curves, Computer
+ *   Graphics 19, No 3 (Proc. SIGGRAPH'85), 245-254, 1985.
+ * - Pletinckx, D., Quaternion calculus as a basic tool in computer
+ *   graphics, The Visual Computer 5, 2-13, 1989.
+ */
+static void
+normalize_quat(float q[4])
+{
+    int i;
+    float mag;
+
+    mag = sqrt(q[0]*q[0] + q[1]*q[1] + q[2]*q[2] + q[3]*q[3]);
+    for (i = 0; i < 4; i++)
+        q[i] /= mag;
+}
+
+/*
+ * Build a rotation matrix, given a quaternion rotation.
+ *
+ */
+void
+build_rotmatrix(float m[4][4], const float q[4])
+{
+    m[0][0] = 1.0 - 2.0 * (q[1] * q[1] + q[2] * q[2]);
+    m[0][1] = 2.0 * (q[0] * q[1] - q[2] * q[3]);
+    m[0][2] = 2.0 * (q[2] * q[0] + q[1] * q[3]);
+    m[0][3] = 0.0;
+
+    m[1][0] = 2.0 * (q[0] * q[1] + q[2] * q[3]);
+    m[1][1]= 1.0 - 2.0 * (q[2] * q[2] + q[0] * q[0]);
+    m[1][2] = 2.0 * (q[1] * q[2] - q[0] * q[3]);
+    m[1][3] = 0.0;
+
+    m[2][0] = 2.0 * (q[2] * q[0] - q[1] * q[3]);
+    m[2][1] = 2.0 * (q[1] * q[2] + q[0] * q[3]);
+    m[2][2] = 1.0 - 2.0 * (q[1] * q[1] + q[0] * q[0]);
+    m[2][3] = 0.0;
+
+    m[3][0] = 0.0;
+    m[3][1] = 0.0;
+    m[3][2] = 0.0;
+    m[3][3] = 1.0;
+}
+