Added MesaLib-7.6

1 files changed, 691 insertions, 0 deletions

diff --git a/mesalib/src/glu/sgi/libnurbs/internals/nurbstess.cc b/mesalib/src/glu/sgi/libnurbs/internals/nurbstess.cc
new file mode 100644
index 000000000..68dfd95f3
--- /dev/null
+++ b/mesalib/src/glu/sgi/libnurbs/internals/nurbstess.cc
@@ -0,0 +1,691 @@
+/*
+** License Applicability. Except to the extent portions of this file are
+** made subject to an alternative license as permitted in the SGI Free
+** Software License B, Version 1.1 (the "License"), the contents of this
+** file are subject only to the provisions of the License. You may not use
+** this file except in compliance with the License. You may obtain a copy
+** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
+** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
+**
+** http://oss.sgi.com/projects/FreeB
+**
+** Note that, as provided in the License, the Software is distributed on an
+** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
+** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
+** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
+** PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+**
+** Original Code. The Original Code is: OpenGL Sample Implementation,
+** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
+** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
+** Copyright in any portions created by third parties is as indicated
+** elsewhere herein. All Rights Reserved.
+**
+** Additional Notice Provisions: The application programming interfaces
+** established by SGI in conjunction with the Original Code are The
+** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
+** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version
+** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X
+** Window System(R) (Version 1.3), released October 19, 1998. This software
+** was created using the OpenGL(R) version 1.2.1 Sample Implementation
+** published by SGI, but has not been independently verified as being
+** compliant with the OpenGL(R) version 1.2.1 Specification.
+*/
+
+/*
+ * nurbstess.c++
+ *
+ */
+
+#include "glimports.h"
+#include "myassert.h"
+#include "mysetjmp.h"
+#include "mystdio.h"
+#include "nurbsconsts.h"
+#include "nurbstess.h"
+#include "bufpool.h"
+#include "quilt.h"
+#include "knotvector.h"
+#include "mapdesc.h"
+#include "maplist.h"
+
+void 
+NurbsTessellator::set_domain_distance_u_rate(REAL u_rate)
+{
+  subdivider.set_domain_distance_u_rate(u_rate);
+}
+
+void 
+NurbsTessellator::set_domain_distance_v_rate(REAL v_rate)
+{
+  subdivider.set_domain_distance_v_rate(v_rate);
+}
+
+void
+NurbsTessellator::set_is_domain_distance_sampling(int flag)
+{
+  subdivider.set_is_domain_distance_sampling(flag);
+}
+
+void
+NurbsTessellator::resetObjects( void )
+{
+    subdivider.clear();
+}
+
+void
+NurbsTessellator::makeobj( int )
+{
+#ifndef NDEBUG
+   _glu_dprintf( "makeobj\n" );
+#endif
+}
+
+void
+NurbsTessellator::closeobj( void )
+{
+#ifndef NDEBUG
+   _glu_dprintf( "closeobj\n" );
+#endif
+}
+
+void
+NurbsTessellator::bgnrender( void )
+{
+#ifndef NDEBUG
+   _glu_dprintf( "bgnrender\n" );
+#endif
+}
+
+void
+NurbsTessellator::endrender( void )
+{
+#ifndef NDEBUG
+    _glu_dprintf( "endrender\n" );
+#endif
+}
+
+/*-----------------------------------------------------------------------------
+ * do_freebgnsurface - free o_surface structure 
+ *
+ * Client: do_freeall(), bgnsurface()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_freebgnsurface( O_surface *o_surface )
+{
+    o_surface->deleteMe( o_surfacePool );
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_bgnsurface - begin the display of a surface
+ *
+ * Client: bgnsurface()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_bgnsurface( O_surface *o_surface )
+{
+    if( inSurface ) {
+	do_nurbserror( 27 );
+	endsurface();
+    }
+    inSurface = 1;
+
+    if( ! playBack ) bgnrender();
+
+    isTrimModified = 0;
+    isSurfaceModified = 0;
+    isDataValid = 1;
+    numTrims = 0;
+    currentSurface = o_surface;
+    nextTrim = &( currentSurface->o_trim );
+    nextNurbssurface = &( currentSurface->o_nurbssurface );
+}
+
+/*-----------------------------------------------------------------------------
+ * do_bgncurve - begin the display of a curve 
+ * 
+ * Client: bgncurve()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_bgncurve( O_curve *o_curve )
+{
+    if ( inCurve ) {
+	do_nurbserror( 6 );
+	endcurve();
+    }
+
+    inCurve = 1;
+    currentCurve = o_curve;
+    currentCurve->curvetype = ct_none;
+
+    if( inTrim ) {
+        if( *nextCurve != o_curve ) {
+	    isCurveModified = 1;
+	    *nextCurve = o_curve;
+	}
+    } else {
+        if( ! playBack ) bgnrender();
+        isDataValid = 1;
+    }
+    nextCurve = &(o_curve->next);
+    nextPwlcurve = &(o_curve->curve.o_pwlcurve);
+    nextNurbscurve = &(o_curve->curve.o_nurbscurve);
+}
+
+/*-----------------------------------------------------------------------------
+ * do_endcurve -
+ * 
+ * Client: endcurve()
+ *-----------------------------------------------------------------------------
+ */
+    
+void
+NurbsTessellator::do_endcurve( void )
+{
+    if( ! inCurve ) {
+	do_nurbserror( 7 );
+	return;
+    }
+    inCurve = 0;
+
+    *nextCurve = 0;
+    if (currentCurve->curvetype == ct_nurbscurve)
+	*nextNurbscurve = 0;
+    else
+	*nextPwlcurve = 0;
+
+    if ( ! inTrim ) {
+        if( ! isDataValid ) {
+            do_freecurveall( currentCurve ); 
+	    return;
+        }
+
+	int errval;
+	errval = ::mysetjmp( jumpbuffer );
+	if( errval == 0 ) {
+	    if( currentCurve->curvetype == ct_nurbscurve ) {
+		subdivider.beginQuilts();
+		for( O_nurbscurve *n = currentCurve->curve.o_nurbscurve; n != 0; n = n->next ) 
+		    subdivider.addQuilt( n->bezier_curves );
+		subdivider.endQuilts();
+		subdivider.drawCurves(); 
+		if( ! playBack ) endrender();
+	    } else {
+		/* XXX */
+	        if( ! playBack ) endrender();
+	        /*do_draw_pwlcurve( currentCurve->curve.o_pwlcurve ) */;
+	        do_nurbserror( 9 );
+	    }
+	} else {
+	    if( ! playBack ) endrender();
+	    do_nurbserror( errval );
+	}
+	do_freecurveall( currentCurve );
+	resetObjects();
+    }
+}
+
+/*-----------------------------------------------------------------------------
+ * do_endsurface - mark end of surface, display surface, free immediate data 
+ *
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_endsurface( void )
+{
+    if( inTrim ) {
+	do_nurbserror( 12 );
+	endtrim();
+    }
+
+    if( ! inSurface ) {
+	do_nurbserror( 13 );
+	return;
+    }
+    inSurface = 0;
+
+    *nextNurbssurface = 0;
+
+    if( ! isDataValid ) {
+        do_freeall( ); 
+	return;
+    }
+
+    if( *nextTrim != 0 ) {
+	isTrimModified = 1;
+        *nextTrim = 0;
+    }
+
+    int errval;
+
+    errval = ::mysetjmp( jumpbuffer );
+    if( errval == 0 ) {
+        if( numTrims > 0 ) {
+
+	    subdivider.beginTrims();
+	    for( O_trim	*trim = currentSurface->o_trim; trim; trim = trim->next ) {
+		subdivider.beginLoop();
+		for( O_curve *curve = trim->o_curve; curve; curve = curve->next ) {  
+		    curve->used = 0;
+		    assert( curve->curvetype != ct_none );
+		    if (curve->curvetype == ct_pwlcurve) {
+			O_pwlcurve *c = curve->curve.o_pwlcurve; 
+			subdivider.addArc( c->npts, c->pts, curve->nuid );
+		    } else {
+			Quilt	   *quilt = curve->curve.o_nurbscurve->bezier_curves;
+			Quiltspec  *qspec = quilt->qspec;
+			REAL       *cpts  = quilt->cpts + qspec->offset;
+			REAL       *cptsend = cpts + (qspec->width * qspec->order * qspec->stride);
+			for( ; cpts != cptsend; cpts += qspec->order*qspec->stride ) 
+			     subdivider.addArc( cpts, quilt, curve->nuid );
+		    }
+		}
+		subdivider.endLoop();
+	    }
+	    subdivider.endTrims();
+	}
+
+	subdivider.beginQuilts();
+	for( O_nurbssurface *n = currentSurface->o_nurbssurface; n; n = n->next ) 
+	    subdivider.addQuilt( n->bezier_patches );
+	subdivider.endQuilts();
+        subdivider.drawSurfaces( currentSurface->nuid ); 
+	if( ! playBack ) endrender();
+    } else {
+	if( ! playBack ) endrender();
+	do_nurbserror( errval );
+    }
+
+    do_freeall( );
+    resetObjects();
+}
+
+/*-----------------------------------------------------------------------------
+ * do_freeall - free all data allocated in immediate mode
+ *
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_freeall( void )
+{
+    for( O_trim *o_trim = currentSurface->o_trim; o_trim; ) {
+	O_trim *next_o_trim = o_trim->next;
+        for( O_curve *curve = o_trim->o_curve; curve; ) {
+	    O_curve *next_o_curve = curve->next;
+	    do_freecurveall( curve );
+	    curve = next_o_curve;
+	}
+	if( o_trim->save == 0 ) do_freebgntrim( o_trim );
+	o_trim = next_o_trim;
+    }
+
+    O_nurbssurface *nurbss, *next_nurbss;
+    for( nurbss= currentSurface->o_nurbssurface; nurbss; nurbss = next_nurbss) {
+	next_nurbss = nurbss->next;
+	if( nurbss->save == 0 )
+	    do_freenurbssurface( nurbss );
+	else
+	    nurbss->used = 0;
+    }
+
+    if( currentSurface->save == 0 ) do_freebgnsurface( currentSurface );
+}
+
+void
+NurbsTessellator::do_freecurveall( O_curve *curve )
+{
+    assert( curve->curvetype != ct_none );
+
+    if( curve->curvetype == ct_nurbscurve ) {
+	O_nurbscurve *ncurve, *next_ncurve;
+	for( ncurve=curve->curve.o_nurbscurve; ncurve; ncurve=next_ncurve ) {
+	    next_ncurve = ncurve->next;
+	    if( ncurve->save == 0 )
+		do_freenurbscurve( ncurve );
+	    else
+		ncurve->used = 0;
+	}
+    } else {
+	O_pwlcurve *pcurve, *next_pcurve;
+	for( pcurve=curve->curve.o_pwlcurve; pcurve; pcurve=next_pcurve ) {
+	    next_pcurve = pcurve->next;
+	    if( pcurve->save == 0 )
+		do_freepwlcurve( pcurve );
+	    else
+		pcurve->used = 0;
+	}
+    }
+    if( curve->save == 0 )
+        do_freebgncurve( curve );
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_freebgntrim - free the space allocated for a trim loop
+ *
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_freebgntrim( O_trim *o_trim )
+{ 
+    o_trim->deleteMe( o_trimPool );
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_bgntrim - link in a trim loop to the current trimmed surface description
+ *
+ * Client: bgntrim()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_bgntrim( O_trim *o_trim )
+{
+
+    if( ! inSurface ) {
+	do_nurbserror( 15 );
+	bgnsurface( 0 );
+	inSurface = 2;
+    }
+
+    if( inTrim ) {
+	do_nurbserror( 16 );
+	endtrim();
+    }
+    inTrim = 1;
+
+    if( *nextTrim != o_trim ) {
+	isTrimModified = 1;	
+        *nextTrim = o_trim;
+    }
+
+    currentTrim = o_trim;
+    nextTrim = &(o_trim->next);
+    nextCurve = &(o_trim->o_curve);
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_endtrim - mark the end of the current trim loop 
+ *
+ * Client: endtrim()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_endtrim( void )
+{
+    if( ! inTrim ) {
+	do_nurbserror( 17 );
+	return;
+    }
+    inTrim = 0;
+
+    if( currentTrim->o_curve == 0 ) {
+	do_nurbserror( 18 );
+	isDataValid = 0;
+    }
+
+    numTrims++;
+   
+    if( *nextCurve != 0 ) {
+	isTrimModified = 1;
+        *nextCurve = 0;	
+    }
+}
+
+/*-----------------------------------------------------------------------------
+ * do_freepwlcurve -
+ * 
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_freepwlcurve( O_pwlcurve *o_pwlcurve )
+{
+    o_pwlcurve->deleteMe( o_pwlcurvePool );
+}
+
+void
+NurbsTessellator::do_freebgncurve( O_curve *o_curve )
+{
+    o_curve->deleteMe( o_curvePool );
+}
+
+/*-----------------------------------------------------------------------------
+ * do_pwlcurve - link in pwl trim loop to the current surface description
+ * 
+ * Client: pwlcurve()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_pwlcurve( O_pwlcurve *o_pwlcurve )
+{
+    if( ! inTrim ) {
+	do_nurbserror( 19 );
+	if( o_pwlcurve->save == 0 )
+	    do_freepwlcurve(o_pwlcurve );
+	return;
+    }
+
+    if( ! inCurve ) {
+	bgncurve( 0 );
+	inCurve = 2;
+    }
+
+    if( o_pwlcurve->used ) {
+	do_nurbserror( 20 );
+	isDataValid = 0;
+	return;
+    } else
+        o_pwlcurve->used = 1;
+
+    if( currentCurve->curvetype == ct_none ) {
+        currentCurve->curvetype = ct_pwlcurve;
+    } else if( currentCurve->curvetype != ct_pwlcurve ) {
+	do_nurbserror( 21 );
+	isDataValid = 0;
+	return;
+    }
+	
+    if( *nextPwlcurve != o_pwlcurve ) {
+	isCurveModified = 1;
+        *nextPwlcurve = o_pwlcurve;
+    }
+    nextPwlcurve = &(o_pwlcurve->next);
+
+    if( o_pwlcurve->owner != currentCurve ) {
+	isCurveModified = 1;
+	o_pwlcurve->owner = currentCurve;
+    }
+
+    if( (inCurve == 2) ) 
+	endcurve();
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_freenurbscurve -
+ * 
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_freenurbscurve( O_nurbscurve *o_nurbscurve )
+{
+    o_nurbscurve->bezier_curves->deleteMe( quiltPool );
+    o_nurbscurve->deleteMe( o_nurbscurvePool );
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_nurbscurve -
+ * 
+ * Client: nurbscurve() 
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_nurbscurve( O_nurbscurve *o_nurbscurve )
+{
+    if ( ! inCurve ) {
+	bgncurve( 0 );
+	inCurve = 2;
+    }
+
+    if( o_nurbscurve->used ) {
+	/* error - curve was already called in current surface */
+	do_nurbserror( 23 );
+	isDataValid = 0;
+	return;
+    } else
+        o_nurbscurve->used = 1;
+
+    if( currentCurve->curvetype == ct_none ) {
+        currentCurve->curvetype = ct_nurbscurve;
+    } else if( currentCurve->curvetype != ct_nurbscurve ) {
+	do_nurbserror( 24 );
+	isDataValid = 0;
+	return;
+    }
+	
+    if( *nextNurbscurve != o_nurbscurve ) {
+	isCurveModified = 1;
+	*nextNurbscurve = o_nurbscurve;
+    }
+
+    nextNurbscurve = &(o_nurbscurve->next);
+
+    if( o_nurbscurve->owner != currentCurve ) {
+	isCurveModified = 1;
+	o_nurbscurve->owner = currentCurve;
+    }
+
+    if( o_nurbscurve->owner == 0 )
+	isCurveModified = 1;
+    
+    if( inCurve == 2 )
+        endcurve();
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_freenurbssurface -
+ *
+ * Client:
+ *-----------------------------------------------------------------------------
+ */
+
+void
+NurbsTessellator::do_freenurbssurface( O_nurbssurface *o_nurbssurface )
+{
+    o_nurbssurface->bezier_patches->deleteMe( quiltPool );
+    o_nurbssurface->deleteMe( o_nurbssurfacePool );
+}
+
+/*-----------------------------------------------------------------------------
+ * do_nurbssurface -
+ * 
+ * Client: nurbssurface()
+ *-----------------------------------------------------------------------------
+ */
+void
+NurbsTessellator::do_nurbssurface( O_nurbssurface *o_nurbssurface )
+{
+    if( ! inSurface ) {
+	bgnsurface( 0 );
+	inSurface = 2;
+    }
+
+    if( o_nurbssurface->used ) {
+	/* error - surface was already called in current block */
+	do_nurbserror( 25 );
+	isDataValid = 0;
+	return;
+    } else
+        o_nurbssurface->used = 1;
+
+    if( *nextNurbssurface != o_nurbssurface ) {
+	isSurfaceModified = 1;
+        *nextNurbssurface  = o_nurbssurface;
+    }
+
+    if( o_nurbssurface->owner != currentSurface ) {
+	isSurfaceModified = 1;
+	o_nurbssurface->owner = currentSurface;
+    }
+    nextNurbssurface = &(o_nurbssurface->next);
+
+    if( inSurface == 2  )
+	endsurface();
+}
+
+
+/*-----------------------------------------------------------------------------
+ * do_freenurbsproperty
+ * 
+ *-----------------------------------------------------------------------------
+ */
+
+void
+NurbsTessellator::do_freenurbsproperty( Property *prop )
+{
+    prop->deleteMe( propertyPool );
+}
+
+    
+/*-----------------------------------------------------------------------------
+ * do_setnurbsproperty -
+ * 
+ *-----------------------------------------------------------------------------
+ */
+
+void
+NurbsTessellator::do_setnurbsproperty( Property *prop )
+{
+    renderhints.setProperty( prop->tag, prop->value );
+    if( prop->save == 0 )
+	do_freenurbsproperty( prop );
+}
+
+void
+NurbsTessellator::do_setnurbsproperty2( Property *prop )
+{
+    Mapdesc *mapdesc = maplist.find( prop->type );
+
+    mapdesc->setProperty( prop->tag, prop->value );
+    if( prop->save == 0 )
+	do_freenurbsproperty( prop );
+}
+
+void
+NurbsTessellator::errorHandler( int )
+{
+}
+
+void
+NurbsTessellator::do_nurbserror( int msg )
+{
+    errorHandler( msg );
+}
+
+int 
+NurbsTessellator::do_check_knots( Knotvector *knots, const char *msg )
+{
+    int status = knots->validate();
+    if( status ) {
+	do_nurbserror( status );
+        if( renderhints.errorchecking != N_NOMSG ) knots->show( msg );
+    }
+    return status;
+}
+
+
+
+
+