Added MesaLib-7.6

1 files changed, 146 insertions, 0 deletions

diff --git a/mesalib/src/glu/sgi/libnurbs/internals/reader.cc b/mesalib/src/glu/sgi/libnurbs/internals/reader.cc
new file mode 100644
index 000000000..6135eef60
--- /dev/null
+++ b/mesalib/src/glu/sgi/libnurbs/internals/reader.cc
@@ -0,0 +1,146 @@
+/*
+** License Applicability. Except to the extent portions of this file are
+** made subject to an alternative license as permitted in the SGI Free
+** Software License B, Version 1.1 (the "License"), the contents of this
+** file are subject only to the provisions of the License. You may not use
+** this file except in compliance with the License. You may obtain a copy
+** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600
+** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at:
+**
+** http://oss.sgi.com/projects/FreeB
+**
+** Note that, as provided in the License, the Software is distributed on an
+** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS
+** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND
+** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
+** PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+**
+** Original Code. The Original Code is: OpenGL Sample Implementation,
+** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,
+** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.
+** Copyright in any portions created by third parties is as indicated
+** elsewhere herein. All Rights Reserved.
+**
+** Additional Notice Provisions: The application programming interfaces
+** established by SGI in conjunction with the Original Code are The
+** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released
+** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version
+** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X
+** Window System(R) (Version 1.3), released October 19, 1998. This software
+** was created using the OpenGL(R) version 1.2.1 Sample Implementation
+** published by SGI, but has not been independently verified as being
+** compliant with the OpenGL(R) version 1.2.1 Specification.
+*/
+
+/*
+ *  reader.c++
+ *
+ */
+
+#include <stdio.h>
+#include "glimports.h"
+#include "nurbsconsts.h"
+#include "reader.h"
+#include "trimvertex.h"
+#include "simplemath.h"
+
+//when read a pwlCurve, if two consecutive points are the same, then 
+//eliminate one of them. This makes the tessellator more robust. The spec
+//assumes the application makes sure there are no redundant points. 
+//but in Inspector, the trim curves seem to have redundant points a lot.
+//I guess other similar users may have the same problem.
+
+#define ELIMINATE_REDUNDANT_POINTS 
+
+#ifdef  ELIMINATE_REDUNDANT_POINTS 
+#define equal(x,y) ( glu_abs(x-y) <= 0.00001)
+#endif
+
+#ifdef ELIMINATE_REDUNDANT_POINTS 
+O_pwlcurve::O_pwlcurve( long _type, long count, INREAL *array, long byte_stride, TrimVertex *trimpts )
+{
+    next = 0;
+    used = 0;
+    owner = 0;
+    pts = trimpts;
+    npts = (int) count;
+    int i;
+
+    /* copy user data into internal trimming data structures */
+    switch( _type ) {
+        case N_P2D: {
+	    TrimVertex *v = pts;
+            TrimVertex *prev = NULL;
+	    int num = 0;
+	    int doit;
+	    for(i=0; i<count; i++) {
+	        doit = 1;
+         	if(prev != NULL)
+		  {
+		    if(equal(prev->param[0], array[0]) && equal(prev->param[1], array[1]))
+		      {
+			doit = 0;
+		      }
+		  }
+		
+		if(doit)
+		  {
+		    v->param[0] = (REAL) array[0];
+		    v->param[1] = (REAL) array[1];
+		    prev = v;
+		    v++;
+                    num++;
+		  }
+		array = (INREAL *) (((char *) array) + byte_stride);
+	      }
+	    npts = num;
+	    break;
+	}
+        case N_P2DR: {
+	    TrimVertex *v = pts;
+    	    for( TrimVertex *lastv = v + count; v != lastv; v++ ) {
+	        v->param[0] = (REAL) array[0] / (REAL) array[2];
+	        v->param[1] = (REAL) array[1] / (REAL) array[2];
+		array = (INREAL *) (((char *) array) + byte_stride);
+	    }
+	    break;
+	}
+    }
+}
+#else
+O_pwlcurve::O_pwlcurve( long _type, long count, INREAL *array, long byte_stride, TrimVertex *trimpts )
+{
+    next = 0;
+    used = 0;
+    owner = 0;
+    pts = trimpts;
+    npts = (int) count;
+
+    /* copy user data into internal trimming data structures */
+    switch( _type ) {
+        case N_P2D: {
+	    TrimVertex *v = pts;
+    	    for( TrimVertex *lastv = v + count; v != lastv; v++ ) {
+	        v->param[0] = (REAL) array[0];
+	        v->param[1] = (REAL) array[1];
+		array = (INREAL *) (((char *) array) + byte_stride);
+	    }
+	    break;
+	}
+        case N_P2DR: {
+	    TrimVertex *v = pts;
+    	    for( TrimVertex *lastv = v + count; v != lastv; v++ ) {
+	        v->param[0] = (REAL) array[0] / (REAL) array[2];
+	        v->param[1] = (REAL) array[1] / (REAL) array[2];
+		array = (INREAL *) (((char *) array) + byte_stride);
+	    }
+	    break;
+	}
+    }
+}
+#endif 
+
+
+
+
+