svn merge ^/branches/released . --username marha

1 files changed, 979 insertions, 0 deletions

diff --git a/mesalib/src/mesa/swrast/s_tritemp.h b/mesalib/src/mesa/swrast/s_tritemp.h
new file mode 100644
index 000000000..8e3c5b5ee
--- /dev/null
+++ b/mesalib/src/mesa/swrast/s_tritemp.h
@@ -0,0 +1,979 @@
+/*
+ * Mesa 3-D graphics library
+ * Version:  7.0
+ *
+ * Copyright (C) 1999-2007  Brian Paul   All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Triangle Rasterizer Template
+ *
+ * This file is #include'd to generate custom triangle rasterizers.
+ *
+ * The following macros may be defined to indicate what auxillary information
+ * must be interpolated across the triangle:
+ *    INTERP_Z        - if defined, interpolate integer Z values
+ *    INTERP_RGB      - if defined, interpolate integer RGB values
+ *    INTERP_ALPHA    - if defined, interpolate integer Alpha values
+ *    INTERP_INDEX    - if defined, interpolate color index values
+ *    INTERP_INT_TEX  - if defined, interpolate integer ST texcoords
+ *                         (fast, simple 2-D texture mapping, without
+ *                         perspective correction)
+ *    INTERP_ATTRIBS  - if defined, interpolate arbitrary attribs (texcoords,
+ *                         varying vars, etc)  This also causes W to be
+ *                         computed for perspective correction).
+ *
+ * When one can directly address pixels in the color buffer the following
+ * macros can be defined and used to compute pixel addresses during
+ * rasterization (see pRow):
+ *    PIXEL_TYPE          - the datatype of a pixel (GLubyte, GLushort, GLuint)
+ *    BYTES_PER_ROW       - number of bytes per row in the color buffer
+ *    PIXEL_ADDRESS(X,Y)  - returns the address of pixel at (X,Y) where
+ *                          Y==0 at bottom of screen and increases upward.
+ *
+ * Similarly, for direct depth buffer access, this type is used for depth
+ * buffer addressing (see zRow):
+ *    DEPTH_TYPE          - either GLushort or GLuint
+ *
+ * Optionally, one may provide one-time setup code per triangle:
+ *    SETUP_CODE    - code which is to be executed once per triangle
+ *
+ * The following macro MUST be defined:
+ *    RENDER_SPAN(span) - code to write a span of pixels.
+ *
+ * This code was designed for the origin to be in the lower-left corner.
+ *
+ * Inspired by triangle rasterizer code written by Allen Akin.  Thanks Allen!
+ *
+ *
+ * Some notes on rasterization accuracy:
+ *
+ * This code uses fixed point arithmetic (the GLfixed type) to iterate
+ * over the triangle edges and interpolate ancillary data (such as Z,
+ * color, secondary color, etc).  The number of fractional bits in
+ * GLfixed and the value of SUB_PIXEL_BITS has a direct bearing on the
+ * accuracy of rasterization.
+ *
+ * If SUB_PIXEL_BITS=4 then we'll snap the vertices to the nearest
+ * 1/16 of a pixel.  If we're walking up a long, nearly vertical edge
+ * (dx=1/16, dy=1024) we'll need 4 + 10 = 14 fractional bits in
+ * GLfixed to walk the edge without error.  If the maximum viewport
+ * height is 4K pixels, then we'll need 4 + 12 = 16 fractional bits.
+ *
+ * Historically, Mesa has used 11 fractional bits in GLfixed, snaps
+ * vertices to 1/16 pixel and allowed a maximum viewport height of 2K
+ * pixels.  11 fractional bits is actually insufficient for accurately
+ * rasterizing some triangles.  More recently, the maximum viewport
+ * height was increased to 4K pixels.  Thus, Mesa should be using 16
+ * fractional bits in GLfixed.  Unfortunately, there may be some issues
+ * with setting FIXED_FRAC_BITS=16, such as multiplication overflow.
+ * This will have to be examined in some detail...
+ *
+ * For now, if you find rasterization errors, particularly with tall,
+ * sliver triangles, try increasing FIXED_FRAC_BITS and/or decreasing
+ * SUB_PIXEL_BITS.
+ */
+
+
+/*
+ * Some code we unfortunately need to prevent negative interpolated colors.
+ */
+#ifndef CLAMP_INTERPOLANT
+#define CLAMP_INTERPOLANT(CHANNEL, CHANNELSTEP, LEN)		\
+do {								\
+   GLfixed endVal = span.CHANNEL + (LEN) * span.CHANNELSTEP;	\
+   if (endVal < 0) {						\
+      span.CHANNEL -= endVal;					\
+   }								\
+   if (span.CHANNEL < 0) {					\
+      span.CHANNEL = 0;						\
+   }								\
+} while (0)
+#endif
+
+
+static void NAME(GLcontext *ctx, const SWvertex *v0,
+                                 const SWvertex *v1,
+                                 const SWvertex *v2 )
+{
+   typedef struct {
+      const SWvertex *v0, *v1;   /* Y(v0) < Y(v1) */
+      GLfloat dx;	/* X(v1) - X(v0) */
+      GLfloat dy;	/* Y(v1) - Y(v0) */
+      GLfloat dxdy;	/* dx/dy */
+      GLfixed fdxdy;	/* dx/dy in fixed-point */
+      GLfloat adjy;	/* adjust from v[0]->fy to fsy, scaled */
+      GLfixed fsx;	/* first sample point x coord */
+      GLfixed fsy;
+      GLfixed fx0;	/* fixed pt X of lower endpoint */
+      GLint lines;	/* number of lines to be sampled on this edge */
+   } EdgeT;
+
+   const SWcontext *swrast = SWRAST_CONTEXT(ctx);
+#ifdef INTERP_Z
+   const GLint depthBits = ctx->DrawBuffer->Visual.depthBits;
+   const GLint fixedToDepthShift = depthBits <= 16 ? FIXED_SHIFT : 0;
+   const GLfloat maxDepth = ctx->DrawBuffer->_DepthMaxF;
+#define FixedToDepth(F)  ((F) >> fixedToDepthShift)
+#endif
+   EdgeT eMaj, eTop, eBot;
+   GLfloat oneOverArea;
+   const SWvertex *vMin, *vMid, *vMax;  /* Y(vMin)<=Y(vMid)<=Y(vMax) */
+   GLfloat bf = SWRAST_CONTEXT(ctx)->_BackfaceSign;
+   const GLint snapMask = ~((FIXED_ONE / (1 << SUB_PIXEL_BITS)) - 1); /* for x/y coord snapping */
+   GLfixed vMin_fx, vMin_fy, vMid_fx, vMid_fy, vMax_fx, vMax_fy;
+
+   SWspan span;
+
+   (void) swrast;
+
+   INIT_SPAN(span, GL_POLYGON);
+   span.y = 0; /* silence warnings */
+
+#ifdef INTERP_Z
+   (void) fixedToDepthShift;
+#endif
+
+   /*
+   printf("%s()\n", __FUNCTION__);
+   printf("  %g, %g, %g\n",
+          v0->attrib[FRAG_ATTRIB_WPOS][0],
+          v0->attrib[FRAG_ATTRIB_WPOS][1],
+          v0->attrib[FRAG_ATTRIB_WPOS][2]);
+   printf("  %g, %g, %g\n",
+          v1->attrib[FRAG_ATTRIB_WPOS][0],
+          v1->attrib[FRAG_ATTRIB_WPOS][1],
+          v1->attrib[FRAG_ATTRIB_WPOS][2]);
+   printf("  %g, %g, %g\n",
+          v2->attrib[FRAG_ATTRIB_WPOS][0],
+          v2->attrib[FRAG_ATTRIB_WPOS][1],
+          v2->attrib[FRAG_ATTRIB_WPOS][2]);
+   */
+
+   /* Compute fixed point x,y coords w/ half-pixel offsets and snapping.
+    * And find the order of the 3 vertices along the Y axis.
+    */
+   {
+      const GLfixed fy0 = FloatToFixed(v0->attrib[FRAG_ATTRIB_WPOS][1] - 0.5F) & snapMask;
+      const GLfixed fy1 = FloatToFixed(v1->attrib[FRAG_ATTRIB_WPOS][1] - 0.5F) & snapMask;
+      const GLfixed fy2 = FloatToFixed(v2->attrib[FRAG_ATTRIB_WPOS][1] - 0.5F) & snapMask;
+      if (fy0 <= fy1) {
+         if (fy1 <= fy2) {
+            /* y0 <= y1 <= y2 */
+            vMin = v0;   vMid = v1;   vMax = v2;
+            vMin_fy = fy0;  vMid_fy = fy1;  vMax_fy = fy2;
+         }
+         else if (fy2 <= fy0) {
+            /* y2 <= y0 <= y1 */
+            vMin = v2;   vMid = v0;   vMax = v1;
+            vMin_fy = fy2;  vMid_fy = fy0;  vMax_fy = fy1;
+         }
+         else {
+            /* y0 <= y2 <= y1 */
+            vMin = v0;   vMid = v2;   vMax = v1;
+            vMin_fy = fy0;  vMid_fy = fy2;  vMax_fy = fy1;
+            bf = -bf;
+         }
+      }
+      else {
+         if (fy0 <= fy2) {
+            /* y1 <= y0 <= y2 */
+            vMin = v1;   vMid = v0;   vMax = v2;
+            vMin_fy = fy1;  vMid_fy = fy0;  vMax_fy = fy2;
+            bf = -bf;
+         }
+         else if (fy2 <= fy1) {
+            /* y2 <= y1 <= y0 */
+            vMin = v2;   vMid = v1;   vMax = v0;
+            vMin_fy = fy2;  vMid_fy = fy1;  vMax_fy = fy0;
+            bf = -bf;
+         }
+         else {
+            /* y1 <= y2 <= y0 */
+            vMin = v1;   vMid = v2;   vMax = v0;
+            vMin_fy = fy1;  vMid_fy = fy2;  vMax_fy = fy0;
+         }
+      }
+
+      /* fixed point X coords */
+      vMin_fx = FloatToFixed(vMin->attrib[FRAG_ATTRIB_WPOS][0] + 0.5F) & snapMask;
+      vMid_fx = FloatToFixed(vMid->attrib[FRAG_ATTRIB_WPOS][0] + 0.5F) & snapMask;
+      vMax_fx = FloatToFixed(vMax->attrib[FRAG_ATTRIB_WPOS][0] + 0.5F) & snapMask;
+   }
+
+   /* vertex/edge relationship */
+   eMaj.v0 = vMin;   eMaj.v1 = vMax;   /*TODO: .v1's not needed */
+   eTop.v0 = vMid;   eTop.v1 = vMax;
+   eBot.v0 = vMin;   eBot.v1 = vMid;
+
+   /* compute deltas for each edge:  vertex[upper] - vertex[lower] */
+   eMaj.dx = FixedToFloat(vMax_fx - vMin_fx);
+   eMaj.dy = FixedToFloat(vMax_fy - vMin_fy);
+   eTop.dx = FixedToFloat(vMax_fx - vMid_fx);
+   eTop.dy = FixedToFloat(vMax_fy - vMid_fy);
+   eBot.dx = FixedToFloat(vMid_fx - vMin_fx);
+   eBot.dy = FixedToFloat(vMid_fy - vMin_fy);
+
+   /* compute area, oneOverArea and perform backface culling */
+   {
+      const GLfloat area = eMaj.dx * eBot.dy - eBot.dx * eMaj.dy;
+
+      if (IS_INF_OR_NAN(area) || area == 0.0F)
+         return;
+
+      if (area * bf * swrast->_BackfaceCullSign < 0.0)
+         return;
+
+      oneOverArea = 1.0F / area;
+
+      /* 0 = front, 1 = back */
+      span.facing = oneOverArea * bf > 0.0F;
+   }
+
+   /* Edge setup.  For a triangle strip these could be reused... */
+   {
+      eMaj.fsy = FixedCeil(vMin_fy);
+      eMaj.lines = FixedToInt(FixedCeil(vMax_fy - eMaj.fsy));
+      if (eMaj.lines > 0) {
+         eMaj.dxdy = eMaj.dx / eMaj.dy;
+         eMaj.fdxdy = SignedFloatToFixed(eMaj.dxdy);
+         eMaj.adjy = (GLfloat) (eMaj.fsy - vMin_fy);  /* SCALED! */
+         eMaj.fx0 = vMin_fx;
+         eMaj.fsx = eMaj.fx0 + (GLfixed) (eMaj.adjy * eMaj.dxdy);
+      }
+      else {
+         return;  /*CULLED*/
+      }
+
+      eTop.fsy = FixedCeil(vMid_fy);
+      eTop.lines = FixedToInt(FixedCeil(vMax_fy - eTop.fsy));
+      if (eTop.lines > 0) {
+         eTop.dxdy = eTop.dx / eTop.dy;
+         eTop.fdxdy = SignedFloatToFixed(eTop.dxdy);
+         eTop.adjy = (GLfloat) (eTop.fsy - vMid_fy); /* SCALED! */
+         eTop.fx0 = vMid_fx;
+         eTop.fsx = eTop.fx0 + (GLfixed) (eTop.adjy * eTop.dxdy);
+      }
+
+      eBot.fsy = FixedCeil(vMin_fy);
+      eBot.lines = FixedToInt(FixedCeil(vMid_fy - eBot.fsy));
+      if (eBot.lines > 0) {
+         eBot.dxdy = eBot.dx / eBot.dy;
+         eBot.fdxdy = SignedFloatToFixed(eBot.dxdy);
+         eBot.adjy = (GLfloat) (eBot.fsy - vMin_fy);  /* SCALED! */
+         eBot.fx0 = vMin_fx;
+         eBot.fsx = eBot.fx0 + (GLfixed) (eBot.adjy * eBot.dxdy);
+      }
+   }
+
+   /*
+    * Conceptually, we view a triangle as two subtriangles
+    * separated by a perfectly horizontal line.  The edge that is
+    * intersected by this line is one with maximal absolute dy; we
+    * call it a ``major'' edge.  The other two edges are the
+    * ``top'' edge (for the upper subtriangle) and the ``bottom''
+    * edge (for the lower subtriangle).  If either of these two
+    * edges is horizontal or very close to horizontal, the
+    * corresponding subtriangle might cover zero sample points;
+    * we take care to handle such cases, for performance as well
+    * as correctness.
+    *
+    * By stepping rasterization parameters along the major edge,
+    * we can avoid recomputing them at the discontinuity where
+    * the top and bottom edges meet.  However, this forces us to
+    * be able to scan both left-to-right and right-to-left.
+    * Also, we must determine whether the major edge is at the
+    * left or right side of the triangle.  We do this by
+    * computing the magnitude of the cross-product of the major
+    * and top edges.  Since this magnitude depends on the sine of
+    * the angle between the two edges, its sign tells us whether
+    * we turn to the left or to the right when travelling along
+    * the major edge to the top edge, and from this we infer
+    * whether the major edge is on the left or the right.
+    *
+    * Serendipitously, this cross-product magnitude is also a
+    * value we need to compute the iteration parameter
+    * derivatives for the triangle, and it can be used to perform
+    * backface culling because its sign tells us whether the
+    * triangle is clockwise or counterclockwise.  In this code we
+    * refer to it as ``area'' because it's also proportional to
+    * the pixel area of the triangle.
+    */
+
+   {
+      GLint scan_from_left_to_right;  /* true if scanning left-to-right */
+#ifdef INTERP_INDEX
+      GLfloat didx, didy;
+#endif
+
+      /*
+       * Execute user-supplied setup code
+       */
+#ifdef SETUP_CODE
+      SETUP_CODE
+#endif
+
+      scan_from_left_to_right = (oneOverArea < 0.0F);
+
+
+      /* compute d?/dx and d?/dy derivatives */
+#ifdef INTERP_Z
+      span.interpMask |= SPAN_Z;
+      {
+         GLfloat eMaj_dz = vMax->attrib[FRAG_ATTRIB_WPOS][2] - vMin->attrib[FRAG_ATTRIB_WPOS][2];
+         GLfloat eBot_dz = vMid->attrib[FRAG_ATTRIB_WPOS][2] - vMin->attrib[FRAG_ATTRIB_WPOS][2];
+         span.attrStepX[FRAG_ATTRIB_WPOS][2] = oneOverArea * (eMaj_dz * eBot.dy - eMaj.dy * eBot_dz);
+         if (span.attrStepX[FRAG_ATTRIB_WPOS][2] > maxDepth ||
+             span.attrStepX[FRAG_ATTRIB_WPOS][2] < -maxDepth) {
+            /* probably a sliver triangle */
+            span.attrStepX[FRAG_ATTRIB_WPOS][2] = 0.0;
+            span.attrStepY[FRAG_ATTRIB_WPOS][2] = 0.0;
+         }
+         else {
+            span.attrStepY[FRAG_ATTRIB_WPOS][2] = oneOverArea * (eMaj.dx * eBot_dz - eMaj_dz * eBot.dx);
+         }
+         if (depthBits <= 16)
+            span.zStep = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_WPOS][2]);
+         else
+            span.zStep = (GLint) span.attrStepX[FRAG_ATTRIB_WPOS][2];
+      }
+#endif
+#ifdef INTERP_RGB
+      span.interpMask |= SPAN_RGBA;
+      if (ctx->Light.ShadeModel == GL_SMOOTH) {
+         GLfloat eMaj_dr = (GLfloat) (vMax->color[RCOMP] - vMin->color[RCOMP]);
+         GLfloat eBot_dr = (GLfloat) (vMid->color[RCOMP] - vMin->color[RCOMP]);
+         GLfloat eMaj_dg = (GLfloat) (vMax->color[GCOMP] - vMin->color[GCOMP]);
+         GLfloat eBot_dg = (GLfloat) (vMid->color[GCOMP] - vMin->color[GCOMP]);
+         GLfloat eMaj_db = (GLfloat) (vMax->color[BCOMP] - vMin->color[BCOMP]);
+         GLfloat eBot_db = (GLfloat) (vMid->color[BCOMP] - vMin->color[BCOMP]);
+#  ifdef INTERP_ALPHA
+         GLfloat eMaj_da = (GLfloat) (vMax->color[ACOMP] - vMin->color[ACOMP]);
+         GLfloat eBot_da = (GLfloat) (vMid->color[ACOMP] - vMin->color[ACOMP]);
+#  endif
+         span.attrStepX[FRAG_ATTRIB_COL0][0] = oneOverArea * (eMaj_dr * eBot.dy - eMaj.dy * eBot_dr);
+         span.attrStepY[FRAG_ATTRIB_COL0][0] = oneOverArea * (eMaj.dx * eBot_dr - eMaj_dr * eBot.dx);
+         span.attrStepX[FRAG_ATTRIB_COL0][1] = oneOverArea * (eMaj_dg * eBot.dy - eMaj.dy * eBot_dg);
+         span.attrStepY[FRAG_ATTRIB_COL0][1] = oneOverArea * (eMaj.dx * eBot_dg - eMaj_dg * eBot.dx);
+         span.attrStepX[FRAG_ATTRIB_COL0][2] = oneOverArea * (eMaj_db * eBot.dy - eMaj.dy * eBot_db);
+         span.attrStepY[FRAG_ATTRIB_COL0][2] = oneOverArea * (eMaj.dx * eBot_db - eMaj_db * eBot.dx);
+         span.redStep   = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_COL0][0]);
+         span.greenStep = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_COL0][1]);
+         span.blueStep  = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_COL0][2]);
+#  ifdef INTERP_ALPHA
+         span.attrStepX[FRAG_ATTRIB_COL0][3] = oneOverArea * (eMaj_da * eBot.dy - eMaj.dy * eBot_da);
+         span.attrStepY[FRAG_ATTRIB_COL0][3] = oneOverArea * (eMaj.dx * eBot_da - eMaj_da * eBot.dx);
+         span.alphaStep = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_COL0][3]);
+#  endif /* INTERP_ALPHA */
+      }
+      else {
+         ASSERT(ctx->Light.ShadeModel == GL_FLAT);
+         span.interpMask |= SPAN_FLAT;
+         span.attrStepX[FRAG_ATTRIB_COL0][0] = span.attrStepY[FRAG_ATTRIB_COL0][0] = 0.0F;
+         span.attrStepX[FRAG_ATTRIB_COL0][1] = span.attrStepY[FRAG_ATTRIB_COL0][1] = 0.0F;
+         span.attrStepX[FRAG_ATTRIB_COL0][2] = span.attrStepY[FRAG_ATTRIB_COL0][2] = 0.0F;
+	 span.redStep   = 0;
+	 span.greenStep = 0;
+	 span.blueStep  = 0;
+#  ifdef INTERP_ALPHA
+         span.attrStepX[FRAG_ATTRIB_COL0][3] = span.attrStepY[FRAG_ATTRIB_COL0][3] = 0.0F;
+	 span.alphaStep = 0;
+#  endif
+      }
+#endif /* INTERP_RGB */
+#ifdef INTERP_INDEX
+      span.interpMask |= SPAN_INDEX;
+      if (ctx->Light.ShadeModel == GL_SMOOTH) {
+         GLfloat eMaj_di = vMax->attrib[FRAG_ATTRIB_CI][0] - vMin->attrib[FRAG_ATTRIB_CI][0];
+         GLfloat eBot_di = vMid->attrib[FRAG_ATTRIB_CI][0] - vMin->attrib[FRAG_ATTRIB_CI][0];
+         didx = oneOverArea * (eMaj_di * eBot.dy - eMaj.dy * eBot_di);
+         didy = oneOverArea * (eMaj.dx * eBot_di - eMaj_di * eBot.dx);
+         span.indexStep = SignedFloatToFixed(didx);
+      }
+      else {
+         span.interpMask |= SPAN_FLAT;
+         didx = didy = 0.0F;
+         span.indexStep = 0;
+      }
+#endif
+#ifdef INTERP_INT_TEX
+      {
+         GLfloat eMaj_ds = (vMax->attrib[FRAG_ATTRIB_TEX0][0] - vMin->attrib[FRAG_ATTRIB_TEX0][0]) * S_SCALE;
+         GLfloat eBot_ds = (vMid->attrib[FRAG_ATTRIB_TEX0][0] - vMin->attrib[FRAG_ATTRIB_TEX0][0]) * S_SCALE;
+         GLfloat eMaj_dt = (vMax->attrib[FRAG_ATTRIB_TEX0][1] - vMin->attrib[FRAG_ATTRIB_TEX0][1]) * T_SCALE;
+         GLfloat eBot_dt = (vMid->attrib[FRAG_ATTRIB_TEX0][1] - vMin->attrib[FRAG_ATTRIB_TEX0][1]) * T_SCALE;
+         span.attrStepX[FRAG_ATTRIB_TEX0][0] = oneOverArea * (eMaj_ds * eBot.dy - eMaj.dy * eBot_ds);
+         span.attrStepY[FRAG_ATTRIB_TEX0][0] = oneOverArea * (eMaj.dx * eBot_ds - eMaj_ds * eBot.dx);
+         span.attrStepX[FRAG_ATTRIB_TEX0][1] = oneOverArea * (eMaj_dt * eBot.dy - eMaj.dy * eBot_dt);
+         span.attrStepY[FRAG_ATTRIB_TEX0][1] = oneOverArea * (eMaj.dx * eBot_dt - eMaj_dt * eBot.dx);
+         span.intTexStep[0] = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_TEX0][0]);
+         span.intTexStep[1] = SignedFloatToFixed(span.attrStepX[FRAG_ATTRIB_TEX0][1]);
+      }
+#endif
+#ifdef INTERP_ATTRIBS
+      {
+         /* attrib[FRAG_ATTRIB_WPOS][3] is 1/W */
+         const GLfloat wMax = vMax->attrib[FRAG_ATTRIB_WPOS][3];
+         const GLfloat wMin = vMin->attrib[FRAG_ATTRIB_WPOS][3];
+         const GLfloat wMid = vMid->attrib[FRAG_ATTRIB_WPOS][3];
+         {
+            const GLfloat eMaj_dw = wMax - wMin;
+            const GLfloat eBot_dw = wMid - wMin;
+            span.attrStepX[FRAG_ATTRIB_WPOS][3] = oneOverArea * (eMaj_dw * eBot.dy - eMaj.dy * eBot_dw);
+            span.attrStepY[FRAG_ATTRIB_WPOS][3] = oneOverArea * (eMaj.dx * eBot_dw - eMaj_dw * eBot.dx);
+         }
+         ATTRIB_LOOP_BEGIN
+            if (swrast->_InterpMode[attr] == GL_FLAT) {
+               ASSIGN_4V(span.attrStepX[attr], 0.0, 0.0, 0.0, 0.0);
+               ASSIGN_4V(span.attrStepY[attr], 0.0, 0.0, 0.0, 0.0);
+            }
+            else {
+               GLuint c;
+               for (c = 0; c < 4; c++) {
+                  GLfloat eMaj_da = vMax->attrib[attr][c] * wMax - vMin->attrib[attr][c] * wMin;
+                  GLfloat eBot_da = vMid->attrib[attr][c] * wMid - vMin->attrib[attr][c] * wMin;
+                  span.attrStepX[attr][c] = oneOverArea * (eMaj_da * eBot.dy - eMaj.dy * eBot_da);
+                  span.attrStepY[attr][c] = oneOverArea * (eMaj.dx * eBot_da - eMaj_da * eBot.dx);
+               }
+            }
+         ATTRIB_LOOP_END
+      }
+#endif
+
+      /*
+       * We always sample at pixel centers.  However, we avoid
+       * explicit half-pixel offsets in this code by incorporating
+       * the proper offset in each of x and y during the
+       * transformation to window coordinates.
+       *
+       * We also apply the usual rasterization rules to prevent
+       * cracks and overlaps.  A pixel is considered inside a
+       * subtriangle if it meets all of four conditions: it is on or
+       * to the right of the left edge, strictly to the left of the
+       * right edge, on or below the top edge, and strictly above
+       * the bottom edge.  (Some edges may be degenerate.)
+       *
+       * The following discussion assumes left-to-right scanning
+       * (that is, the major edge is on the left); the right-to-left
+       * case is a straightforward variation.
+       *
+       * We start by finding the half-integral y coordinate that is
+       * at or below the top of the triangle.  This gives us the
+       * first scan line that could possibly contain pixels that are
+       * inside the triangle.
+       *
+       * Next we creep down the major edge until we reach that y,
+       * and compute the corresponding x coordinate on the edge.
+       * Then we find the half-integral x that lies on or just
+       * inside the edge.  This is the first pixel that might lie in
+       * the interior of the triangle.  (We won't know for sure
+       * until we check the other edges.)
+       *
+       * As we rasterize the triangle, we'll step down the major
+       * edge.  For each step in y, we'll move an integer number
+       * of steps in x.  There are two possible x step sizes, which
+       * we'll call the ``inner'' step (guaranteed to land on the
+       * edge or inside it) and the ``outer'' step (guaranteed to
+       * land on the edge or outside it).  The inner and outer steps
+       * differ by one.  During rasterization we maintain an error
+       * term that indicates our distance from the true edge, and
+       * select either the inner step or the outer step, whichever
+       * gets us to the first pixel that falls inside the triangle.
+       *
+       * All parameters (z, red, etc.) as well as the buffer
+       * addresses for color and z have inner and outer step values,
+       * so that we can increment them appropriately.  This method
+       * eliminates the need to adjust parameters by creeping a
+       * sub-pixel amount into the triangle at each scanline.
+       */
+
+      {
+         GLint subTriangle;
+         GLfixed fxLeftEdge = 0, fxRightEdge = 0;
+         GLfixed fdxLeftEdge = 0, fdxRightEdge = 0;
+         GLfixed fError = 0, fdError = 0;
+#ifdef PIXEL_ADDRESS
+         PIXEL_TYPE *pRow = NULL;
+         GLint dPRowOuter = 0, dPRowInner;  /* offset in bytes */
+#endif
+#ifdef INTERP_Z
+#  ifdef DEPTH_TYPE
+         struct gl_renderbuffer *zrb
+            = ctx->DrawBuffer->Attachment[BUFFER_DEPTH].Renderbuffer;
+         DEPTH_TYPE *zRow = NULL;
+         GLint dZRowOuter = 0, dZRowInner;  /* offset in bytes */
+#  endif
+         GLuint zLeft = 0;
+         GLfixed fdzOuter = 0, fdzInner;
+#endif
+#ifdef INTERP_RGB
+         GLint rLeft = 0, fdrOuter = 0, fdrInner;
+         GLint gLeft = 0, fdgOuter = 0, fdgInner;
+         GLint bLeft = 0, fdbOuter = 0, fdbInner;
+#endif
+#ifdef INTERP_ALPHA
+         GLint aLeft = 0, fdaOuter = 0, fdaInner;
+#endif
+#ifdef INTERP_INDEX
+         GLfixed iLeft=0, diOuter=0, diInner;
+#endif
+#ifdef INTERP_INT_TEX
+         GLfixed sLeft=0, dsOuter=0, dsInner;
+         GLfixed tLeft=0, dtOuter=0, dtInner;
+#endif
+#ifdef INTERP_ATTRIBS
+         GLfloat wLeft = 0, dwOuter = 0, dwInner;
+         GLfloat attrLeft[FRAG_ATTRIB_MAX][4];
+         GLfloat daOuter[FRAG_ATTRIB_MAX][4], daInner[FRAG_ATTRIB_MAX][4];
+#endif
+
+         for (subTriangle=0; subTriangle<=1; subTriangle++) {
+            EdgeT *eLeft, *eRight;
+            int setupLeft, setupRight;
+            int lines;
+
+            if (subTriangle==0) {
+               /* bottom half */
+               if (scan_from_left_to_right) {
+                  eLeft = &eMaj;
+                  eRight = &eBot;
+                  lines = eRight->lines;
+                  setupLeft = 1;
+                  setupRight = 1;
+               }
+               else {
+                  eLeft = &eBot;
+                  eRight = &eMaj;
+                  lines = eLeft->lines;
+                  setupLeft = 1;
+                  setupRight = 1;
+               }
+            }
+            else {
+               /* top half */
+               if (scan_from_left_to_right) {
+                  eLeft = &eMaj;
+                  eRight = &eTop;
+                  lines = eRight->lines;
+                  setupLeft = 0;
+                  setupRight = 1;
+               }
+               else {
+                  eLeft = &eTop;
+                  eRight = &eMaj;
+                  lines = eLeft->lines;
+                  setupLeft = 1;
+                  setupRight = 0;
+               }
+               if (lines == 0)
+                  return;
+            }
+
+            if (setupLeft && eLeft->lines > 0) {
+               const SWvertex *vLower = eLeft->v0;
+               const GLfixed fsy = eLeft->fsy;
+               const GLfixed fsx = eLeft->fsx;  /* no fractional part */
+               const GLfixed fx = FixedCeil(fsx);  /* no fractional part */
+               const GLfixed adjx = (GLfixed) (fx - eLeft->fx0); /* SCALED! */
+               const GLfixed adjy = (GLfixed) eLeft->adjy;      /* SCALED! */
+               GLint idxOuter;
+               GLfloat dxOuter;
+               GLfixed fdxOuter;
+
+               fError = fx - fsx - FIXED_ONE;
+               fxLeftEdge = fsx - FIXED_EPSILON;
+               fdxLeftEdge = eLeft->fdxdy;
+               fdxOuter = FixedFloor(fdxLeftEdge - FIXED_EPSILON);
+               fdError = fdxOuter - fdxLeftEdge + FIXED_ONE;
+               idxOuter = FixedToInt(fdxOuter);
+               dxOuter = (GLfloat) idxOuter;
+               span.y = FixedToInt(fsy);
+
+               /* silence warnings on some compilers */
+               (void) dxOuter;
+               (void) adjx;
+               (void) adjy;
+               (void) vLower;
+
+#ifdef PIXEL_ADDRESS
+               {
+                  pRow = (PIXEL_TYPE *) PIXEL_ADDRESS(FixedToInt(fxLeftEdge), span.y);
+                  dPRowOuter = -((int)BYTES_PER_ROW) + idxOuter * sizeof(PIXEL_TYPE);
+                  /* negative because Y=0 at bottom and increases upward */
+               }
+#endif
+               /*
+                * Now we need the set of parameter (z, color, etc.) values at
+                * the point (fx, fsy).  This gives us properly-sampled parameter
+                * values that we can step from pixel to pixel.  Furthermore,
+                * although we might have intermediate results that overflow
+                * the normal parameter range when we step temporarily outside
+                * the triangle, we shouldn't overflow or underflow for any
+                * pixel that's actually inside the triangle.
+                */
+
+#ifdef INTERP_Z
+               {
+                  GLfloat z0 = vLower->attrib[FRAG_ATTRIB_WPOS][2];
+                  if (depthBits <= 16) {
+                     /* interpolate fixed-pt values */
+                     GLfloat tmp = (z0 * FIXED_SCALE
+                                    + span.attrStepX[FRAG_ATTRIB_WPOS][2] * adjx
+                                    + span.attrStepY[FRAG_ATTRIB_WPOS][2] * adjy) + FIXED_HALF;
+                     if (tmp < MAX_GLUINT / 2)
+                        zLeft = (GLfixed) tmp;
+                     else
+                        zLeft = MAX_GLUINT / 2;
+                     fdzOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_WPOS][2] +
+                                                   dxOuter * span.attrStepX[FRAG_ATTRIB_WPOS][2]);
+                  }
+                  else {
+                     /* interpolate depth values w/out scaling */
+                     zLeft = (GLuint) (z0 + span.attrStepX[FRAG_ATTRIB_WPOS][2] * FixedToFloat(adjx)
+                                          + span.attrStepY[FRAG_ATTRIB_WPOS][2] * FixedToFloat(adjy));
+                     fdzOuter = (GLint) (span.attrStepY[FRAG_ATTRIB_WPOS][2] +
+                                         dxOuter * span.attrStepX[FRAG_ATTRIB_WPOS][2]);
+                  }
+#  ifdef DEPTH_TYPE
+                  zRow = (DEPTH_TYPE *)
+                    zrb->GetPointer(ctx, zrb, FixedToInt(fxLeftEdge), span.y);
+                  dZRowOuter = (ctx->DrawBuffer->Width + idxOuter) * sizeof(DEPTH_TYPE);
+#  endif
+               }
+#endif
+#ifdef INTERP_RGB
+               if (ctx->Light.ShadeModel == GL_SMOOTH) {
+                  rLeft = (GLint)(ChanToFixed(vLower->color[RCOMP])
+                                  + span.attrStepX[FRAG_ATTRIB_COL0][0] * adjx
+                                  + span.attrStepY[FRAG_ATTRIB_COL0][0] * adjy) + FIXED_HALF;
+                  gLeft = (GLint)(ChanToFixed(vLower->color[GCOMP])
+                                  + span.attrStepX[FRAG_ATTRIB_COL0][1] * adjx
+                                  + span.attrStepY[FRAG_ATTRIB_COL0][1] * adjy) + FIXED_HALF;
+                  bLeft = (GLint)(ChanToFixed(vLower->color[BCOMP])
+                                  + span.attrStepX[FRAG_ATTRIB_COL0][2] * adjx
+                                  + span.attrStepY[FRAG_ATTRIB_COL0][2] * adjy) + FIXED_HALF;
+                  fdrOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_COL0][0]
+                                                + dxOuter * span.attrStepX[FRAG_ATTRIB_COL0][0]);
+                  fdgOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_COL0][1]
+                                                + dxOuter * span.attrStepX[FRAG_ATTRIB_COL0][1]);
+                  fdbOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_COL0][2]
+                                                + dxOuter * span.attrStepX[FRAG_ATTRIB_COL0][2]);
+#  ifdef INTERP_ALPHA
+                  aLeft = (GLint)(ChanToFixed(vLower->color[ACOMP])
+                                  + span.attrStepX[FRAG_ATTRIB_COL0][3] * adjx
+                                  + span.attrStepY[FRAG_ATTRIB_COL0][3] * adjy) + FIXED_HALF;
+                  fdaOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_COL0][3]
+                                                + dxOuter * span.attrStepX[FRAG_ATTRIB_COL0][3]);
+#  endif
+               }
+               else {
+                  ASSERT(ctx->Light.ShadeModel == GL_FLAT);
+                  rLeft = ChanToFixed(v2->color[RCOMP]);
+                  gLeft = ChanToFixed(v2->color[GCOMP]);
+                  bLeft = ChanToFixed(v2->color[BCOMP]);
+                  fdrOuter = fdgOuter = fdbOuter = 0;
+#  ifdef INTERP_ALPHA
+                  aLeft = ChanToFixed(v2->color[ACOMP]);
+                  fdaOuter = 0;
+#  endif
+               }
+#endif /* INTERP_RGB */
+
+
+#ifdef INTERP_INDEX
+               if (ctx->Light.ShadeModel == GL_SMOOTH) {
+                  iLeft = (GLfixed)(vLower->attrib[FRAG_ATTRIB_CI][0] * FIXED_SCALE
+                                 + didx * adjx + didy * adjy) + FIXED_HALF;
+                  diOuter = SignedFloatToFixed(didy + dxOuter * didx);
+               }
+               else {
+                  ASSERT(ctx->Light.ShadeModel == GL_FLAT);
+                  iLeft = FloatToFixed(v2->attrib[FRAG_ATTRIB_CI][0]);
+                  diOuter = 0;
+               }
+#endif
+#ifdef INTERP_INT_TEX
+               {
+                  GLfloat s0, t0;
+                  s0 = vLower->attrib[FRAG_ATTRIB_TEX0][0] * S_SCALE;
+                  sLeft = (GLfixed)(s0 * FIXED_SCALE + span.attrStepX[FRAG_ATTRIB_TEX0][0] * adjx
+                                 + span.attrStepY[FRAG_ATTRIB_TEX0][0] * adjy) + FIXED_HALF;
+                  dsOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_TEX0][0]
+                                               + dxOuter * span.attrStepX[FRAG_ATTRIB_TEX0][0]);
+
+                  t0 = vLower->attrib[FRAG_ATTRIB_TEX0][1] * T_SCALE;
+                  tLeft = (GLfixed)(t0 * FIXED_SCALE + span.attrStepX[FRAG_ATTRIB_TEX0][1] * adjx
+                                 + span.attrStepY[FRAG_ATTRIB_TEX0][1] * adjy) + FIXED_HALF;
+                  dtOuter = SignedFloatToFixed(span.attrStepY[FRAG_ATTRIB_TEX0][1]
+                                               + dxOuter * span.attrStepX[FRAG_ATTRIB_TEX0][1]);
+               }
+#endif
+#ifdef INTERP_ATTRIBS
+               {
+                  const GLuint attr = FRAG_ATTRIB_WPOS;
+                  wLeft = vLower->attrib[FRAG_ATTRIB_WPOS][3]
+                        + (span.attrStepX[attr][3] * adjx
+                           + span.attrStepY[attr][3] * adjy) * (1.0F/FIXED_SCALE);
+                  dwOuter = span.attrStepY[attr][3] + dxOuter * span.attrStepX[attr][3];
+               }
+               ATTRIB_LOOP_BEGIN
+                  const GLfloat invW = vLower->attrib[FRAG_ATTRIB_WPOS][3];
+                  if (swrast->_InterpMode[attr] == GL_FLAT) {
+                     GLuint c;
+                     for (c = 0; c < 4; c++) {
+                        attrLeft[attr][c] = v2->attrib[attr][c] * invW;
+                        daOuter[attr][c] = 0.0;
+                     }
+                  }
+                  else {
+                     GLuint c;
+                     for (c = 0; c < 4; c++) {
+                        const GLfloat a = vLower->attrib[attr][c] * invW;
+                        attrLeft[attr][c] = a + (  span.attrStepX[attr][c] * adjx
+                                                 + span.attrStepY[attr][c] * adjy) * (1.0F/FIXED_SCALE);
+                        daOuter[attr][c] = span.attrStepY[attr][c] + dxOuter * span.attrStepX[attr][c];
+                     }
+                  }
+               ATTRIB_LOOP_END
+#endif
+            } /*if setupLeft*/
+
+
+            if (setupRight && eRight->lines>0) {
+               fxRightEdge = eRight->fsx - FIXED_EPSILON;
+               fdxRightEdge = eRight->fdxdy;
+            }
+
+            if (lines==0) {
+               continue;
+            }
+
+
+            /* Rasterize setup */
+#ifdef PIXEL_ADDRESS
+            dPRowInner = dPRowOuter + sizeof(PIXEL_TYPE);
+#endif
+#ifdef INTERP_Z
+#  ifdef DEPTH_TYPE
+            dZRowInner = dZRowOuter + sizeof(DEPTH_TYPE);
+#  endif
+            fdzInner = fdzOuter + span.zStep;
+#endif
+#ifdef INTERP_RGB
+            fdrInner = fdrOuter + span.redStep;
+            fdgInner = fdgOuter + span.greenStep;
+            fdbInner = fdbOuter + span.blueStep;
+#endif
+#ifdef INTERP_ALPHA
+            fdaInner = fdaOuter + span.alphaStep;
+#endif
+#ifdef INTERP_INDEX
+            diInner = diOuter + span.indexStep;
+#endif
+#ifdef INTERP_INT_TEX
+            dsInner = dsOuter + span.intTexStep[0];
+            dtInner = dtOuter + span.intTexStep[1];
+#endif
+#ifdef INTERP_ATTRIBS
+            dwInner = dwOuter + span.attrStepX[FRAG_ATTRIB_WPOS][3];
+            ATTRIB_LOOP_BEGIN
+               GLuint c;
+               for (c = 0; c < 4; c++) {
+                  daInner[attr][c] = daOuter[attr][c] + span.attrStepX[attr][c];
+               }
+            ATTRIB_LOOP_END
+#endif
+
+            while (lines > 0) {
+               /* initialize the span interpolants to the leftmost value */
+               /* ff = fixed-pt fragment */
+               const GLint right = FixedToInt(fxRightEdge);
+               span.x = FixedToInt(fxLeftEdge);
+               if (right <= span.x)
+                  span.end = 0;
+               else
+                  span.end = right - span.x;
+
+#ifdef INTERP_Z
+               span.z = zLeft;
+#endif
+#ifdef INTERP_RGB
+               span.red = rLeft;
+               span.green = gLeft;
+               span.blue = bLeft;
+#endif
+#ifdef INTERP_ALPHA
+               span.alpha = aLeft;
+#endif
+#ifdef INTERP_INDEX
+               span.index = iLeft;
+#endif
+#ifdef INTERP_INT_TEX
+               span.intTex[0] = sLeft;
+               span.intTex[1] = tLeft;
+#endif
+
+#ifdef INTERP_ATTRIBS
+               span.attrStart[FRAG_ATTRIB_WPOS][3] = wLeft;
+               ATTRIB_LOOP_BEGIN
+                  GLuint c;
+                  for (c = 0; c < 4; c++) {
+                     span.attrStart[attr][c] = attrLeft[attr][c];
+                  }
+               ATTRIB_LOOP_END
+#endif
+
+               /* This is where we actually generate fragments */
+               /* XXX the test for span.y > 0 _shouldn't_ be needed but
+                * it fixes a problem on 64-bit Opterons (bug 4842).
+                */
+               if (span.end > 0 && span.y >= 0) {
+                  const GLint len = span.end - 1;
+                  (void) len;
+#ifdef INTERP_RGB
+                  CLAMP_INTERPOLANT(red, redStep, len);
+                  CLAMP_INTERPOLANT(green, greenStep, len);
+                  CLAMP_INTERPOLANT(blue, blueStep, len);
+#endif
+#ifdef INTERP_ALPHA
+                  CLAMP_INTERPOLANT(alpha, alphaStep, len);
+#endif
+#ifdef INTERP_INDEX
+                  CLAMP_INTERPOLANT(index, indexStep, len);
+#endif
+                  {
+                     RENDER_SPAN( span );
+                  }
+               }
+
+               /*
+                * Advance to the next scan line.  Compute the
+                * new edge coordinates, and adjust the
+                * pixel-center x coordinate so that it stays
+                * on or inside the major edge.
+                */
+               span.y++;
+               lines--;
+
+               fxLeftEdge += fdxLeftEdge;
+               fxRightEdge += fdxRightEdge;
+
+               fError += fdError;
+               if (fError >= 0) {
+                  fError -= FIXED_ONE;
+
+#ifdef PIXEL_ADDRESS
+                  pRow = (PIXEL_TYPE *) ((GLubyte *) pRow + dPRowOuter);
+#endif
+#ifdef INTERP_Z
+#  ifdef DEPTH_TYPE
+                  zRow = (DEPTH_TYPE *) ((GLubyte *) zRow + dZRowOuter);
+#  endif
+                  zLeft += fdzOuter;
+#endif
+#ifdef INTERP_RGB
+                  rLeft += fdrOuter;
+                  gLeft += fdgOuter;
+                  bLeft += fdbOuter;
+#endif
+#ifdef INTERP_ALPHA
+                  aLeft += fdaOuter;
+#endif
+#ifdef INTERP_INDEX
+                  iLeft += diOuter;
+#endif
+#ifdef INTERP_INT_TEX
+                  sLeft += dsOuter;
+                  tLeft += dtOuter;
+#endif
+#ifdef INTERP_ATTRIBS
+                  wLeft += dwOuter;
+                  ATTRIB_LOOP_BEGIN
+                     GLuint c;
+                     for (c = 0; c < 4; c++) {
+                        attrLeft[attr][c] += daOuter[attr][c];
+                     }
+                  ATTRIB_LOOP_END
+#endif
+               }
+               else {
+#ifdef PIXEL_ADDRESS
+                  pRow = (PIXEL_TYPE *) ((GLubyte *) pRow + dPRowInner);
+#endif
+#ifdef INTERP_Z
+#  ifdef DEPTH_TYPE
+                  zRow = (DEPTH_TYPE *) ((GLubyte *) zRow + dZRowInner);
+#  endif
+                  zLeft += fdzInner;
+#endif
+#ifdef INTERP_RGB
+                  rLeft += fdrInner;
+                  gLeft += fdgInner;
+                  bLeft += fdbInner;
+#endif
+#ifdef INTERP_ALPHA
+                  aLeft += fdaInner;
+#endif
+#ifdef INTERP_INDEX
+                  iLeft += diInner;
+#endif
+#ifdef INTERP_INT_TEX
+                  sLeft += dsInner;
+                  tLeft += dtInner;
+#endif
+#ifdef INTERP_ATTRIBS
+                  wLeft += dwInner;
+                  ATTRIB_LOOP_BEGIN
+                     GLuint c;
+                     for (c = 0; c < 4; c++) {
+                        attrLeft[attr][c] += daInner[attr][c];
+                     }
+                  ATTRIB_LOOP_END
+#endif
+               }
+            } /*while lines>0*/
+
+         } /* for subTriangle */
+
+      }
+   }
+}
+
+#undef SETUP_CODE
+#undef RENDER_SPAN
+
+#undef PIXEL_TYPE
+#undef BYTES_PER_ROW
+#undef PIXEL_ADDRESS
+#undef DEPTH_TYPE
+
+#undef INTERP_Z
+#undef INTERP_RGB
+#undef INTERP_ALPHA
+#undef INTERP_INDEX
+#undef INTERP_INT_TEX
+#undef INTERP_ATTRIBS
+
+#undef S_SCALE
+#undef T_SCALE
+
+#undef FixedToDepth
+
+#undef NAME