libxcb mesa xkeyboard-config git update 14 June 2011

9 files changed, 291 insertions, 286 deletions

diff --git a/mesalib/src/mesa/SConscript b/mesalib/src/mesa/SConscript
index fdb4d5a58..24e2155c3 100644
--- a/mesalib/src/mesa/SConscript
+++ b/mesalib/src/mesa/SConscript
@@ -121,7 +121,6 @@ main_sources = [
     'main/texobj.c',
     'main/texpal.c',
     'main/texparam.c',
-    'main/texrender.c',
     'main/texstate.c',
     'main/texstore.c',
     'main/texturebarrier.c',
@@ -174,6 +173,7 @@ swrast_sources = [
     'swrast/s_stencil.c',
     'swrast/s_texcombine.c',
     'swrast/s_texfilter.c',
+    'swrast/s_texrender.c',
     'swrast/s_triangle.c',
     'swrast/s_zoom.c',
 ]
diff --git a/mesalib/src/mesa/drivers/common/driverfuncs.c b/mesalib/src/mesa/drivers/common/driverfuncs.c
index 0dbc7c3e8..8ab129dd7 100644
--- a/mesalib/src/mesa/drivers/common/driverfuncs.c
+++ b/mesalib/src/mesa/drivers/common/driverfuncs.c
@@ -40,7 +40,6 @@
 #include "main/texstore.h"
 #include "main/bufferobj.h"
 #include "main/fbobject.h"
-#include "main/texrender.h"
 #include "main/samplerobj.h"
 #include "main/syncobj.h"
 #include "main/texturebarrier.h"
@@ -183,8 +182,8 @@ _mesa_init_driver_functions(struct dd_function_table *driver)
 
    driver->NewFramebuffer = _mesa_new_framebuffer;
    driver->NewRenderbuffer = _mesa_new_soft_renderbuffer;
-   driver->RenderTexture = _mesa_render_texture;
-   driver->FinishRenderTexture = _mesa_finish_render_texture;
+   driver->RenderTexture = _swrast_render_texture;
+   driver->FinishRenderTexture = _swrast_finish_render_texture;
    driver->FramebufferRenderbuffer = _mesa_framebuffer_renderbuffer;
    driver->ValidateFramebuffer = _mesa_validate_framebuffer;
 
diff --git a/mesalib/src/mesa/drivers/common/meta.c b/mesalib/src/mesa/drivers/common/meta.c
index 979926a7e..0e58aeca3 100644
--- a/mesalib/src/mesa/drivers/common/meta.c
+++ b/mesalib/src/mesa/drivers/common/meta.c
@@ -2691,12 +2691,26 @@ copy_tex_image(struct gl_context *ctx, GLuint dims, GLenum target, GLint level,
    GLenum format, type;
    GLint bpp;
    void *buf;
+   struct gl_renderbuffer *read_rb = ctx->ReadBuffer->_ColorReadBuffer;
 
    texObj = _mesa_get_current_tex_object(ctx, target);
    texImage = _mesa_get_tex_image(ctx, texObj, target, level);
 
    /* Choose format/type for temporary image buffer */
    format = _mesa_base_tex_format(ctx, internalFormat);
+
+   if (format == GL_LUMINANCE &&
+       _mesa_get_format_base_format(read_rb->Format) != GL_LUMINANCE) {
+      /* The glReadPixels() path will convert RGB to luminance by
+       * summing R+G+B.  glCopyTexImage() is supposed to behave as
+       * glCopyPixels, which doesn't do that change, and instead
+       * leaves it up to glTexImage which converts RGB to luminance by
+       * just taking the R channel.  To avoid glReadPixels() trashing
+       * our data, use RGBA for our temporary image.
+       */
+      format = GL_RGBA;
+   }
+
    type = get_temp_image_type(ctx, format);
    bpp = _mesa_bytes_per_pixel(format, type);
    if (bpp <= 0) {
diff --git a/mesalib/src/mesa/main/texgetimage.c b/mesalib/src/mesa/main/texgetimage.c
index 97d101225..26c2ff98b 100644
--- a/mesalib/src/mesa/main/texgetimage.c
+++ b/mesalib/src/mesa/main/texgetimage.c
@@ -233,6 +233,7 @@ get_tex_rgba(struct gl_context *ctx, GLuint dimensions,
    const GLint width = texImage->Width;
    const GLint height = texImage->Height;
    const GLint depth = texImage->Depth;
+   const GLenum dataType = _mesa_get_format_datatype(texImage->TexFormat);
    /* Normally, no pixel transfer ops are performed during glGetTexImage.
     * The only possible exception is component clamping to [0,1].
     */
@@ -248,6 +249,19 @@ get_tex_rgba(struct gl_context *ctx, GLuint dimensions,
       return;
    }
 
+   /* Clamping does not apply to GetTexImage (final conversion)?
+    * Looks like we need clamp though when going from format
+    * containing negative values to unsigned format.
+    */
+   if (format == GL_LUMINANCE || format == GL_LUMINANCE_ALPHA) {
+      transferOps |= IMAGE_CLAMP_BIT;
+   }
+   else if (!type_with_negative_values(type) &&
+            (dataType == GL_FLOAT ||
+             dataType == GL_SIGNED_NORMALIZED)) {
+      transferOps |= IMAGE_CLAMP_BIT;
+   }
+
    /* glGetTexImage always returns sRGB data for sRGB textures. Make sure the
     * fetch functions return sRGB data without linearizing it.
     */
@@ -262,20 +276,6 @@ get_tex_rgba(struct gl_context *ctx, GLuint dimensions,
                                           width, height, format, type,
                                           img, row, 0);
          GLint col;
-         GLenum dataType = _mesa_get_format_datatype(texImage->TexFormat);
-
-         /* clamp does not apply to GetTexImage (final conversion)?
-          * Looks like we need clamp though when going from format
-          * containing negative values to unsigned format.
-          */
-         if (format == GL_LUMINANCE || format == GL_LUMINANCE_ALPHA) {
-            transferOps |= IMAGE_CLAMP_BIT;
-         }
-         else if (!type_with_negative_values(type) &&
-                  (dataType == GL_FLOAT ||
-                   dataType == GL_SIGNED_NORMALIZED)) {
-            transferOps |= IMAGE_CLAMP_BIT;
-         }
 
          for (col = 0; col < width; col++) {
             texImage->FetchTexelf(texImage, col, row, img, rgba[col]);
diff --git a/mesalib/src/mesa/main/texrender.h b/mesalib/src/mesa/main/texrender.h
deleted file mode 100644
index d6e4784ca..000000000
--- a/mesalib/src/mesa/main/texrender.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef TEXRENDER_H

-#define TEXRENDER_H

-

-struct gl_context;

-struct gl_framebuffer;

-struct gl_renderbuffer_attachment;

-

-extern void

-_mesa_render_texture(struct gl_context *ctx,

-                     struct gl_framebuffer *fb,

-                     struct gl_renderbuffer_attachment *att);

-

-extern void

-_mesa_finish_render_texture(struct gl_context *ctx,

-                            struct gl_renderbuffer_attachment *att);

-

-

-#endif /* TEXRENDER_H */

diff --git a/mesalib/src/mesa/sources.mak b/mesalib/src/mesa/sources.mak
index 9b2cb1a3c..4b2ec08bb 100644
--- a/mesalib/src/mesa/sources.mak
+++ b/mesalib/src/mesa/sources.mak
@@ -92,7 +92,6 @@ MAIN_SOURCES = \
 	main/texobj.c \
 	main/texpal.c \
 	main/texparam.c \
-	main/texrender.c \
 	main/texstate.c \
 	main/texstore.c \
 	main/texturebarrier.c \
@@ -145,6 +144,7 @@ SWRAST_SOURCES = \
 	swrast/s_stencil.c \
 	swrast/s_texcombine.c \
 	swrast/s_texfilter.c \
+	swrast/s_texrender.c \
 	swrast/s_triangle.c \
 	swrast/s_zoom.c
 
diff --git a/mesalib/src/mesa/main/texrender.c b/mesalib/src/mesa/swrast/s_texrender.c
index a7641a5f9..52d03c92a 100644
--- a/mesalib/src/mesa/main/texrender.c
+++ b/mesalib/src/mesa/swrast/s_texrender.c
@@ -1,12 +1,12 @@
 
-#include "context.h"
-#include "colormac.h"
-#include "fbobject.h"
-#include "macros.h"
-#include "texfetch.h"
-#include "teximage.h"
-#include "texrender.h"
-#include "renderbuffer.h"
+#include "main/context.h"
+#include "main/colormac.h"
+#include "main/fbobject.h"
+#include "main/macros.h"
+#include "main/texfetch.h"
+#include "main/teximage.h"
+#include "main/renderbuffer.h"
+#include "swrast/swrast.h"
 
 
 /*
@@ -628,9 +628,9 @@ update_wrapper(struct gl_context *ctx, struct gl_renderbuffer_attachment *att)
  * \sa _mesa_framebuffer_renderbuffer
  */
 void
-_mesa_render_texture(struct gl_context *ctx,
-                     struct gl_framebuffer *fb,
-                     struct gl_renderbuffer_attachment *att)
+_swrast_render_texture(struct gl_context *ctx,
+                       struct gl_framebuffer *fb,
+                       struct gl_renderbuffer_attachment *att)
 {
    (void) fb;
 
@@ -642,8 +642,8 @@ _mesa_render_texture(struct gl_context *ctx,
 
 
 void
-_mesa_finish_render_texture(struct gl_context *ctx,
-                            struct gl_renderbuffer_attachment *att)
+_swrast_finish_render_texture(struct gl_context *ctx,
+                              struct gl_renderbuffer_attachment *att)
 {
    /* do nothing */
    /* The renderbuffer texture wrapper will get deleted by the
diff --git a/mesalib/src/mesa/swrast/swrast.h b/mesalib/src/mesa/swrast/swrast.h
index 2db536c7b..27b74c324 100644
--- a/mesalib/src/mesa/swrast/swrast.h
+++ b/mesalib/src/mesa/swrast/swrast.h
@@ -1,232 +1,242 @@
-/*

- * Mesa 3-D graphics library

- * Version:  6.5

- *

- * Copyright (C) 1999-2006  Brian Paul   All Rights Reserved.

- *

- * Permission is hereby granted, free of charge, to any person obtaining a

- * copy of this software and associated documentation files (the "Software"),

- * to deal in the Software without restriction, including without limitation

- * the rights to use, copy, modify, merge, publish, distribute, sublicense,

- * and/or sell copies of the Software, and to permit persons to whom the

- * Software is furnished to do so, subject to the following conditions:

- *

- * The above copyright notice and this permission notice shall be included

- * in all copies or substantial portions of the Software.

- *

- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

- * BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

- * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN

- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

- *

- */

-

-/**

- * \file swrast/swrast.h

- * \brief Public interface to the software rasterization functions.

- * \author Keith Whitwell <keith@tungstengraphics.com>

- */

-

-#ifndef SWRAST_H

-#define SWRAST_H

-

-#include "main/mtypes.h"

-

-/**

- * \struct SWvertex

- * \brief Data-structure to handle vertices in the software rasterizer.

- * 

- * The software rasterizer now uses this format for vertices.  Thus a

- * 'RasterSetup' stage or other translation is required between the

- * tnl module and the swrast rasterization functions.  This serves to

- * isolate the swrast module from the internals of the tnl module, and

- * improve its usefulness as a fallback mechanism for hardware

- * drivers.

- *

- * wpos = attr[FRAG_ATTRIB_WPOS] and MUST BE THE FIRST values in the

- * vertex because of the tnl clipping code.

-

- * wpos[0] and [1] are the screen-coords of SWvertex.

- * wpos[2] is the z-buffer coord (if 16-bit Z buffer, in range [0,65535]).

- * wpos[3] is 1/w where w is the clip-space W coord.  This is the value

- * that clip{XYZ} were multiplied by to get ndc{XYZ}.

- *

- * Full software drivers:

- *   - Register the rastersetup and triangle functions from

- *     utils/software_helper.

- *   - On statechange, update the rasterization pointers in that module.

- *

- * Rasterization hardware drivers:

- *   - Keep native rastersetup.

- *   - Implement native twoside,offset and unfilled triangle setup.

- *   - Implement a translator from native vertices to swrast vertices.

- *   - On partial fallback (mix of accelerated and unaccelerated

- *   prims), call a pass-through function which translates native

- *   vertices to SWvertices and calls the appropriate swrast function.

- *   - On total fallback (vertex format insufficient for state or all

- *     primitives unaccelerated), hook in swrast_setup instead.

- */

-typedef struct {

-   GLfloat attrib[FRAG_ATTRIB_MAX][4];

-   GLchan color[4];   /** integer color */

-   GLfloat pointSize;

-} SWvertex;

-

-

-#define FRAG_ATTRIB_CI FRAG_ATTRIB_COL0

-

-

-struct swrast_device_driver;

-

-

-/* These are the public-access functions exported from swrast.

- */

-

-extern GLboolean

-_swrast_CreateContext( struct gl_context *ctx );

-

-extern void

-_swrast_DestroyContext( struct gl_context *ctx );

-

-/* Get a (non-const) reference to the device driver struct for swrast.

- */

-extern struct swrast_device_driver *

-_swrast_GetDeviceDriverReference( struct gl_context *ctx );

-

-extern void

-_swrast_Bitmap( struct gl_context *ctx,

-		GLint px, GLint py,

-		GLsizei width, GLsizei height,

-		const struct gl_pixelstore_attrib *unpack,

-		const GLubyte *bitmap );

-

-extern void

-_swrast_CopyPixels( struct gl_context *ctx,

-		    GLint srcx, GLint srcy,

-		    GLint destx, GLint desty,

-		    GLsizei width, GLsizei height,

-		    GLenum type );

-

-extern void

-_swrast_DrawPixels( struct gl_context *ctx,

-		    GLint x, GLint y,

-		    GLsizei width, GLsizei height,

-		    GLenum format, GLenum type,

-		    const struct gl_pixelstore_attrib *unpack,

-		    const GLvoid *pixels );

-

-extern void

-_swrast_ReadPixels( struct gl_context *ctx,

-		    GLint x, GLint y, GLsizei width, GLsizei height,

-		    GLenum format, GLenum type,

-		    const struct gl_pixelstore_attrib *unpack,

-		    GLvoid *pixels );

-

-extern void

-_swrast_BlitFramebuffer(struct gl_context *ctx,

-                        GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,

-                        GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,

-                        GLbitfield mask, GLenum filter);

-

-extern void

-_swrast_Clear(struct gl_context *ctx, GLbitfield buffers);

-

-extern void

-_swrast_Accum(struct gl_context *ctx, GLenum op, GLfloat value);

-

-

-

-/* Reset the stipple counter

- */

-extern void

-_swrast_ResetLineStipple( struct gl_context *ctx );

-

-/**

- * Indicates front/back facing for subsequent points/lines when drawing

- * unfilled polygons.  Needed for two-side stencil.

- */

-extern void

-_swrast_SetFacing(struct gl_context *ctx, GLuint facing);

-

-/* These will always render the correct point/line/triangle for the

- * current state.

- *

- * For flatshaded primitives, the provoking vertex is the final one.

- */

-extern void

-_swrast_Point( struct gl_context *ctx, const SWvertex *v );

-

-extern void

-_swrast_Line( struct gl_context *ctx, const SWvertex *v0, const SWvertex *v1 );

-

-extern void

-_swrast_Triangle( struct gl_context *ctx, const SWvertex *v0,

-                  const SWvertex *v1, const SWvertex *v2 );

-

-extern void

-_swrast_Quad( struct gl_context *ctx,

-              const SWvertex *v0, const SWvertex *v1,

-	      const SWvertex *v2,  const SWvertex *v3);

-

-extern void

-_swrast_flush( struct gl_context *ctx );

-

-extern void

-_swrast_render_primitive( struct gl_context *ctx, GLenum mode );

-

-extern void

-_swrast_render_start( struct gl_context *ctx );

-

-extern void

-_swrast_render_finish( struct gl_context *ctx );

-

-/* Tell the software rasterizer about core state changes.

- */

-extern void

-_swrast_InvalidateState( struct gl_context *ctx, GLbitfield new_state );

-

-/* Configure software rasterizer to match hardware rasterizer characteristics:

- */

-extern void

-_swrast_allow_vertex_fog( struct gl_context *ctx, GLboolean value );

-

-extern void

-_swrast_allow_pixel_fog( struct gl_context *ctx, GLboolean value );

-

-/* Debug:

- */

-extern void

-_swrast_print_vertex( struct gl_context *ctx, const SWvertex *v );

-

-

-

-extern void

-_swrast_eject_texture_images(struct gl_context *ctx);

-

-

-

-/**

- * The driver interface for the software rasterizer.

- * XXX this may go away.

- * We may move these functions to ctx->Driver.RenderStart, RenderEnd.

- */

-struct swrast_device_driver {

-   /*

-    * These are called before and after accessing renderbuffers during

-    * software rasterization.

-    *

-    * These are a suitable place for grabbing/releasing hardware locks.

-    *

-    * NOTE: The swrast triangle/line/point routines *DO NOT* call

-    * these functions.  Locking in that case must be organized by the

-    * driver by other mechanisms.

-    */

-   void (*SpanRenderStart)(struct gl_context *ctx);

-   void (*SpanRenderFinish)(struct gl_context *ctx);

-};

-

-

-

-#endif

+/*
+ * Mesa 3-D graphics library
+ * Version:  6.5
+ *
+ * Copyright (C) 1999-2006  Brian Paul   All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * BRIAN PAUL BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/**
+ * \file swrast/swrast.h
+ * \brief Public interface to the software rasterization functions.
+ * \author Keith Whitwell <keith@tungstengraphics.com>
+ */
+
+#ifndef SWRAST_H
+#define SWRAST_H
+
+#include "main/mtypes.h"
+
+/**
+ * \struct SWvertex
+ * \brief Data-structure to handle vertices in the software rasterizer.
+ * 
+ * The software rasterizer now uses this format for vertices.  Thus a
+ * 'RasterSetup' stage or other translation is required between the
+ * tnl module and the swrast rasterization functions.  This serves to
+ * isolate the swrast module from the internals of the tnl module, and
+ * improve its usefulness as a fallback mechanism for hardware
+ * drivers.
+ *
+ * wpos = attr[FRAG_ATTRIB_WPOS] and MUST BE THE FIRST values in the
+ * vertex because of the tnl clipping code.
+
+ * wpos[0] and [1] are the screen-coords of SWvertex.
+ * wpos[2] is the z-buffer coord (if 16-bit Z buffer, in range [0,65535]).
+ * wpos[3] is 1/w where w is the clip-space W coord.  This is the value
+ * that clip{XYZ} were multiplied by to get ndc{XYZ}.
+ *
+ * Full software drivers:
+ *   - Register the rastersetup and triangle functions from
+ *     utils/software_helper.
+ *   - On statechange, update the rasterization pointers in that module.
+ *
+ * Rasterization hardware drivers:
+ *   - Keep native rastersetup.
+ *   - Implement native twoside,offset and unfilled triangle setup.
+ *   - Implement a translator from native vertices to swrast vertices.
+ *   - On partial fallback (mix of accelerated and unaccelerated
+ *   prims), call a pass-through function which translates native
+ *   vertices to SWvertices and calls the appropriate swrast function.
+ *   - On total fallback (vertex format insufficient for state or all
+ *     primitives unaccelerated), hook in swrast_setup instead.
+ */
+typedef struct {
+   GLfloat attrib[FRAG_ATTRIB_MAX][4];
+   GLchan color[4];   /** integer color */
+   GLfloat pointSize;
+} SWvertex;
+
+
+#define FRAG_ATTRIB_CI FRAG_ATTRIB_COL0
+
+
+struct swrast_device_driver;
+
+
+/* These are the public-access functions exported from swrast.
+ */
+
+extern GLboolean
+_swrast_CreateContext( struct gl_context *ctx );
+
+extern void
+_swrast_DestroyContext( struct gl_context *ctx );
+
+/* Get a (non-const) reference to the device driver struct for swrast.
+ */
+extern struct swrast_device_driver *
+_swrast_GetDeviceDriverReference( struct gl_context *ctx );
+
+extern void
+_swrast_Bitmap( struct gl_context *ctx,
+		GLint px, GLint py,
+		GLsizei width, GLsizei height,
+		const struct gl_pixelstore_attrib *unpack,
+		const GLubyte *bitmap );
+
+extern void
+_swrast_CopyPixels( struct gl_context *ctx,
+		    GLint srcx, GLint srcy,
+		    GLint destx, GLint desty,
+		    GLsizei width, GLsizei height,
+		    GLenum type );
+
+extern void
+_swrast_DrawPixels( struct gl_context *ctx,
+		    GLint x, GLint y,
+		    GLsizei width, GLsizei height,
+		    GLenum format, GLenum type,
+		    const struct gl_pixelstore_attrib *unpack,
+		    const GLvoid *pixels );
+
+extern void
+_swrast_ReadPixels( struct gl_context *ctx,
+		    GLint x, GLint y, GLsizei width, GLsizei height,
+		    GLenum format, GLenum type,
+		    const struct gl_pixelstore_attrib *unpack,
+		    GLvoid *pixels );
+
+extern void
+_swrast_BlitFramebuffer(struct gl_context *ctx,
+                        GLint srcX0, GLint srcY0, GLint srcX1, GLint srcY1,
+                        GLint dstX0, GLint dstY0, GLint dstX1, GLint dstY1,
+                        GLbitfield mask, GLenum filter);
+
+extern void
+_swrast_Clear(struct gl_context *ctx, GLbitfield buffers);
+
+extern void
+_swrast_Accum(struct gl_context *ctx, GLenum op, GLfloat value);
+
+
+
+/* Reset the stipple counter
+ */
+extern void
+_swrast_ResetLineStipple( struct gl_context *ctx );
+
+/**
+ * Indicates front/back facing for subsequent points/lines when drawing
+ * unfilled polygons.  Needed for two-side stencil.
+ */
+extern void
+_swrast_SetFacing(struct gl_context *ctx, GLuint facing);
+
+/* These will always render the correct point/line/triangle for the
+ * current state.
+ *
+ * For flatshaded primitives, the provoking vertex is the final one.
+ */
+extern void
+_swrast_Point( struct gl_context *ctx, const SWvertex *v );
+
+extern void
+_swrast_Line( struct gl_context *ctx, const SWvertex *v0, const SWvertex *v1 );
+
+extern void
+_swrast_Triangle( struct gl_context *ctx, const SWvertex *v0,
+                  const SWvertex *v1, const SWvertex *v2 );
+
+extern void
+_swrast_Quad( struct gl_context *ctx,
+              const SWvertex *v0, const SWvertex *v1,
+	      const SWvertex *v2,  const SWvertex *v3);
+
+extern void
+_swrast_flush( struct gl_context *ctx );
+
+extern void
+_swrast_render_primitive( struct gl_context *ctx, GLenum mode );
+
+extern void
+_swrast_render_start( struct gl_context *ctx );
+
+extern void
+_swrast_render_finish( struct gl_context *ctx );
+
+/* Tell the software rasterizer about core state changes.
+ */
+extern void
+_swrast_InvalidateState( struct gl_context *ctx, GLbitfield new_state );
+
+/* Configure software rasterizer to match hardware rasterizer characteristics:
+ */
+extern void
+_swrast_allow_vertex_fog( struct gl_context *ctx, GLboolean value );
+
+extern void
+_swrast_allow_pixel_fog( struct gl_context *ctx, GLboolean value );
+
+/* Debug:
+ */
+extern void
+_swrast_print_vertex( struct gl_context *ctx, const SWvertex *v );
+
+
+
+extern void
+_swrast_eject_texture_images(struct gl_context *ctx);
+
+
+extern void
+_swrast_render_texture(struct gl_context *ctx,
+                       struct gl_framebuffer *fb,
+                       struct gl_renderbuffer_attachment *att);
+
+extern void
+_swrast_finish_render_texture(struct gl_context *ctx,
+                              struct gl_renderbuffer_attachment *att);
+
+
+
+/**
+ * The driver interface for the software rasterizer.
+ * XXX this may go away.
+ * We may move these functions to ctx->Driver.RenderStart, RenderEnd.
+ */
+struct swrast_device_driver {
+   /*
+    * These are called before and after accessing renderbuffers during
+    * software rasterization.
+    *
+    * These are a suitable place for grabbing/releasing hardware locks.
+    *
+    * NOTE: The swrast triangle/line/point routines *DO NOT* call
+    * these functions.  Locking in that case must be organized by the
+    * driver by other mechanisms.
+    */
+   void (*SpanRenderStart)(struct gl_context *ctx);
+   void (*SpanRenderFinish)(struct gl_context *ctx);
+};
+
+
+
+#endif
diff --git a/mesalib/src/mesa/vbo/vbo_exec_array.c b/mesalib/src/mesa/vbo/vbo_exec_array.c
index 5e9b2798c..7959337de 100644
--- a/mesalib/src/mesa/vbo/vbo_exec_array.c
+++ b/mesalib/src/mesa/vbo/vbo_exec_array.c
@@ -337,7 +337,8 @@ print_draw_arrays(struct gl_context *ctx,
 	  mode, start, count);
 
    for (i = 0; i < 32; i++) {
-      GLuint bufName = exec->array.inputs[i]->BufferObj->Name;
+      struct gl_buffer_object *bufObj = exec->array.inputs[i]->BufferObj;
+      GLuint bufName = bufObj->Name;
       GLint stride = exec->array.inputs[i]->Stride;
       printf("attr %2d: size %d stride %d  enabled %d  "
 	     "ptr %p  Bufobj %u\n",
@@ -350,9 +351,8 @@ print_draw_arrays(struct gl_context *ctx,
 	     bufName);
 
       if (bufName) {
-         struct gl_buffer_object *buf = _mesa_lookup_bufferobj(ctx, bufName);
          GLubyte *p = ctx->Driver.MapBuffer(ctx, GL_ARRAY_BUFFER_ARB,
-                                            GL_READ_ONLY_ARB, buf);
+                                            GL_READ_ONLY_ARB, bufObj);
          int offset = (int) (GLintptr) exec->array.inputs[i]->Ptr;
          float *f = (float *) (p + offset);
          int *k = (int *) f;
@@ -364,7 +364,7 @@ print_draw_arrays(struct gl_context *ctx,
          for (i = 0; i < n; i++) {
             printf("    float[%d] = 0x%08x %f\n", i, k[i], f[i]);
          }
-         ctx->Driver.UnmapBuffer(ctx, GL_ARRAY_BUFFER_ARB, buf);
+         ctx->Driver.UnmapBuffer(ctx, GL_ARRAY_BUFFER_ARB, bufObj);
       }
    }
 }