Merge remote-tracking branch 'origin/released'

* origin/released:
  libxtrans xwininfo libX11 libXau libXmu libXdmcp mesa mkfontscale xkeyboard-config git update 14 jan 2013

Conflicts:
	mesalib/src/glsl/glcpp/.gitignore

54 files changed, 644 insertions, 898 deletions

diff --git a/mesalib/configure.ac b/mesalib/configure.ac
index 1b2083df5..5072ee007 100644
--- a/mesalib/configure.ac
+++ b/mesalib/configure.ac
@@ -1079,8 +1079,8 @@ if test "x$enable_dri" = xyes; then
 	LIBS="$save_LIBS"
     fi
 
-    # if we are building any dri driver other than swrast ...
-    if test -n "$DRI_DIRS" -a x"$DRI_DIRS" != xswrast; then
+    # if we are building any dri driver other than swrast or using the dri state tracker ...
+    if test -n "$DRI_DIRS" -a x"$DRI_DIRS" != xswrast || test "x$enable_dri" = xyes; then
         # ... libdrm is required
         if test "x$have_libdrm" != xyes; then
             AC_MSG_ERROR([DRI drivers requires libdrm >= $LIBDRM_REQUIRED])
@@ -1830,7 +1830,7 @@ if test "x$with_gallium_drivers" != x; then
             PKG_CHECK_MODULES([RADEON], [libdrm_radeon >= $LIBDRM_RADEON_REQUIRED])
             gallium_require_llvm "Gallium R300"
             GALLIUM_DRIVERS_DIRS="$GALLIUM_DRIVERS_DIRS r300"
-            gallium_check_st "radeon/drm" "dri-r300" "xorg-r300" "" "xvmc-r300" "vdpau-r300"
+            gallium_check_st "radeon/drm" "dri-r300" "" "" "xvmc-r300" "vdpau-r300"
             ;;
         xr600)
             HAVE_GALLIUM_R600=yes
@@ -2057,7 +2057,6 @@ AC_CONFIG_FILES([Makefile
 		src/gallium/targets/xa-vmwgfx/xatracker.pc
 		src/gallium/targets/xorg-i915/Makefile
 		src/gallium/targets/xorg-nouveau/Makefile
-		src/gallium/targets/xorg-r300/Makefile
 		src/gallium/targets/xorg-r600/Makefile
 		src/gallium/targets/xorg-radeonsi/Makefile
 		src/gallium/targets/xvmc-nouveau/Makefile
@@ -2104,6 +2103,7 @@ AC_CONFIG_FILES([Makefile
 		src/mesa/drivers/Makefile
 		src/mesa/drivers/dri/dri.pc
 		src/mesa/drivers/dri/common/Makefile
+		src/mesa/drivers/dri/common/xmlpool/Makefile
 		src/mesa/drivers/dri/i915/Makefile
 		src/mesa/drivers/dri/i965/Makefile
 		src/mesa/drivers/dri/Makefile
diff --git a/mesalib/docs/GL3.txt b/mesalib/docs/GL3.txt
index 34cce729b..567781d90 100644
--- a/mesalib/docs/GL3.txt
+++ b/mesalib/docs/GL3.txt
@@ -41,15 +41,15 @@ GLX_ARB_create_context (GLX 1.4 is required)          DONE
 
 GL 3.1:
 
-GLSL 1.40                                             DONE (i965)
-Forward compatibile context support/deprecations      DONE (i965)
+GLSL 1.40                                             DONE (i965, r600)
+Forward compatibile context support/deprecations      DONE (i965, r600)
 Instanced drawing (GL_ARB_draw_instanced)             DONE (i965, gallium, swrast)
 Buffer copying (GL_ARB_copy_buffer)                   DONE (i965, r300, r600, swrast)
 Primitive restart (GL_NV_primitive_restart)           DONE (i965, r600)
 16 vertex texture image units                         DONE
-Texture buffer objs (GL_ARB_texture_buffer_object)    DONE for OpenGL 3.1 contexts (i965)
+Texture buffer objs (GL_ARB_texture_buffer_object)    DONE for OpenGL 3.1 contexts (i965, r600)
 Rectangular textures (GL_ARB_texture_rectangle)       DONE (i965, r300, r600, swrast)
-Uniform buffer objs (GL_ARB_uniform_buffer_object)    DONE (i965)
+Uniform buffer objs (GL_ARB_uniform_buffer_object)    DONE (i965, r600, swrast)
 Signed normalized textures (GL_EXT_texture_snorm)     DONE (i965, r300, r600)
 
 
diff --git a/mesalib/src/gallium/auxiliary/Makefile.am b/mesalib/src/gallium/auxiliary/Makefile.am
index b8ac7c9dd..a4eee4773 100644
--- a/mesalib/src/gallium/auxiliary/Makefile.am
+++ b/mesalib/src/gallium/auxiliary/Makefile.am
@@ -45,7 +45,3 @@ util/u_format_srgb.c: $(srcdir)/util/u_format_srgb.py
 
 util/u_format_table.c: $(srcdir)/util/u_format_table.py $(srcdir)/util/u_format_pack.py $(srcdir)/util/u_format_parse.py $(srcdir)/util/u_format.csv
 	$(AM_V_GEN) $(PYTHON2) $(srcdir)/util/u_format_table.py $(srcdir)/util/u_format.csv > $@
-
-#XXX: Delete this when all targets are converted to automake.
-all-local: libgallium.la
-	ln -f $(builddir)/.libs/libgallium.a $(builddir)/libgallium.a
diff --git a/mesalib/src/glsl/Makefile.am b/mesalib/src/glsl/Makefile.am
index aff1559e0..0f545d548 100644
--- a/mesalib/src/glsl/Makefile.am
+++ b/mesalib/src/glsl/Makefile.am
@@ -78,10 +78,3 @@ CLEANFILES = glsl_lexer.cc glsl_parser.cc $(BUILT_SOURCES) builtin_function.cpp
 
 builtin_function.cpp: $(srcdir)/builtins/profiles/* $(srcdir)/builtins/ir/* $(srcdir)/builtins/glsl/* $(srcdir)/builtins/tools/generate_builtins.py $(srcdir)/builtins/tools/texture_builtins.py builtin_compiler/builtin_compiler$(BUILD_EXEEXT)
 	$(AM_V_GEN) $(PYTHON2) $(PYTHON_FLAGS) $(srcdir)/builtins/tools/generate_builtins.py builtin_compiler/builtin_compiler$(BUILD_EXEEXT) > builtin_function.cpp || rm -f builtin_function.cpp
-
-# Provide compatibility with scripts for the old Mesa build system for
-# a while by putting a link to the library in the current directory.
-all-local: libglsl.la
-	ln -f .libs/libglsl.a .
-
-CLEANFILES += libglsl.a
diff --git a/mesalib/src/glsl/glcpp/.gitignore b/mesalib/src/glsl/glcpp/.gitignore
index fc93edb36..9f7e0cc3e 100755
--- a/mesalib/src/glsl/glcpp/.gitignore
+++ b/mesalib/src/glsl/glcpp/.gitignore
@@ -3,3 +3,4 @@ glcpp-lex.c
 glcpp-parse.output

 glcpp-parse.c

 glcpp-parse.h

+tests/*.out

diff --git a/mesalib/src/glsl/glcpp/glcpp-lex.l b/mesalib/src/glsl/glcpp/glcpp-lex.l
index fd28711d1..a029f6203 100644
--- a/mesalib/src/glsl/glcpp/glcpp-lex.l
+++ b/mesalib/src/glsl/glcpp/glcpp-lex.l
@@ -260,6 +260,8 @@ HEXADECIMAL_INTEGER	0[xX][0-9a-fA-F]+[uU]?
 }
 
 "##" {
+	if (parser->is_gles)
+		glcpp_error(yylloc, yyextra, "Token pasting (##) is illegal in GLES");
 	return PASTE;
 }
 
diff --git a/mesalib/src/glsl/glcpp/glcpp-parse.y b/mesalib/src/glsl/glcpp/glcpp-parse.y
index 380a1d99c..8fba923a2 100644
--- a/mesalib/src/glsl/glcpp/glcpp-parse.y
+++ b/mesalib/src/glsl/glcpp/glcpp-parse.y
@@ -363,6 +363,8 @@ integer_constant:
 expression:
 	integer_constant
 |	IDENTIFIER {
+		if (parser->is_gles)
+			glcpp_error(& @1, parser, "undefined macro %s in expression (illegal in GLES)", $1);
 		$$ = 0;
 	}
 |	expression OR expression {
@@ -1179,15 +1181,18 @@ glcpp_parser_create (const struct gl_extensions *extensions, int api)
 	parser->has_new_source_number = 0;
 	parser->new_source_number = 0;
 
+	parser->is_gles = false;
+
 	/* Add pre-defined macros. */
 	if (extensions != NULL) {
 	   if (extensions->OES_EGL_image_external)
 	      add_builtin_define(parser, "GL_OES_EGL_image_external", 1);
 	}
 
-	if (api == API_OPENGLES2)
+	if (api == API_OPENGLES2) {
+		parser->is_gles = true;
 		add_builtin_define(parser, "GL_ES", 1);
-	else {
+	} else {
 	   add_builtin_define(parser, "GL_ARB_draw_buffers", 1);
 	   add_builtin_define(parser, "GL_ARB_texture_rectangle", 1);
 
@@ -2026,11 +2031,6 @@ static void
 _glcpp_parser_handle_version_declaration(glcpp_parser_t *parser, intmax_t version,
                                          const char *es_identifier)
 {
-	/* Note: We assume that if any identifier is present, it means ES.
-         * The GLSL parser will double-check that the identifier is correct.
-	 */
-	bool is_es = es_identifier != NULL;
-
 	macro_t *macro = hash_table_find (parser->defines, "__VERSION__");
 	if (macro) {
 		hash_table_remove (parser->defines, "__VERSION__");
@@ -2038,17 +2038,23 @@ _glcpp_parser_handle_version_declaration(glcpp_parser_t *parser, intmax_t versio
 	}
 	add_builtin_define (parser, "__VERSION__", version);
 
-	if (version == 100)
-		is_es = true;
-	if (is_es)
+	/* If we didn't have a GLES context to begin with, (indicated
+	 * by parser->api), then the version declaration here might
+	 * indicate GLES. */
+	if (! parser->is_gles &&
+	    (version == 100 ||
+	     (es_identifier && (strcmp(es_identifier, "es") == 0))))
+	{
+		parser->is_gles = true;
 		add_builtin_define (parser, "GL_ES", 1);
+	}
 
 	/* Currently, all ES2/ES3 implementations support highp in the
 	 * fragment shader, so we always define this macro in ES2/ES3.
 	 * If we ever get a driver that doesn't support highp, we'll
 	 * need to add a flag to the gl_context and check that here.
 	 */
-	if (version >= 130 || is_es)
+	if (version >= 130 || parser->is_gles)
 		add_builtin_define (parser, "GL_FRAGMENT_PRECISION_HIGH", 1);
 
 	ralloc_asprintf_rewrite_tail (&parser->output, &parser->output_length,
diff --git a/mesalib/src/glsl/glcpp/glcpp.c b/mesalib/src/glsl/glcpp/glcpp.c
index bef9fd08e..13a32fd7d 100644
--- a/mesalib/src/glsl/glcpp/glcpp.c
+++ b/mesalib/src/glsl/glcpp/glcpp.c
@@ -24,6 +24,8 @@
 #include <stdio.h>
 #include <string.h>
 #include <errno.h>
+#include <getopt.h>
+
 #include "glcpp.h"
 #include "main/mtypes.h"
 #include "main/shaderobj.h"
@@ -102,6 +104,37 @@ load_text_file(void *ctx, const char *filename)
 	return text;
 }
 
+/* Initialize only those things that glcpp cares about.
+ */
+static void
+init_fake_gl_context (struct gl_context *gl_ctx)
+{
+	gl_ctx->API = API_OPENGL_COMPAT;
+	gl_ctx->Const.DisableGLSLLineContinuations = false;
+}
+
+static void
+usage (void)
+{
+	fprintf (stderr,
+		 "Usage: glcpp [OPTIONS] [--] [<filename>]\n"
+		 "\n"
+		 "Pre-process the given filename (stdin if no filename given).\n"
+		 "The following options are supported:\n"
+		 "    --disable-line-continuations      Do not interpret lines ending with a\n"
+		 "                                      backslash ('\\') as a line continuation.\n");
+}
+
+enum {
+	DISABLE_LINE_CONTINUATIONS_OPT = CHAR_MAX + 1
+};
+
+const static struct option
+long_options[] = {
+	{"disable-line-continuations", no_argument, 0, DISABLE_LINE_CONTINUATIONS_OPT },
+	{0,                            0,           0, 0 }
+};
+
 int
 main (int argc, char *argv[])
 {
@@ -110,16 +143,36 @@ main (int argc, char *argv[])
 	char *info_log = ralloc_strdup(ctx, "");
 	const char *shader;
 	int ret;
+	struct gl_context gl_ctx;
+	int c;
+
+	init_fake_gl_context (&gl_ctx);
+
+	while ((c = getopt_long(argc, argv, "", long_options, NULL)) != -1) {
+		switch (c) {
+		case DISABLE_LINE_CONTINUATIONS_OPT:
+			gl_ctx.Const.DisableGLSLLineContinuations = true;
+			break;
+		default:
+			usage ();
+			exit (1);
+		}
+	}
 
-	if (argc) {
-		filename = argv[1];
+	if (optind + 1 < argc) {
+		printf ("Unexpected argument: %s\n", argv[optind+1]);
+		usage ();
+		exit (1);
+	}
+	if (optind < argc) {
+		filename = argv[optind];
 	}
 
 	shader = load_text_file (ctx, filename);
 	if (shader == NULL)
 	   return 1;
 
-	ret = glcpp_preprocess(ctx, &shader, &info_log, NULL, API_OPENGL_COMPAT);
+	ret = glcpp_preprocess(ctx, &shader, &info_log, NULL, &gl_ctx);
 
 	printf("%s", shader);
 	fprintf(stderr, "%s", info_log);
diff --git a/mesalib/src/glsl/glcpp/glcpp.h b/mesalib/src/glsl/glcpp/glcpp.h
index a459289b2..8aaa551d1 100644
--- a/mesalib/src/glsl/glcpp/glcpp.h
+++ b/mesalib/src/glsl/glcpp/glcpp.h
@@ -27,6 +27,8 @@
 #include <stdint.h>
 #include <stdbool.h>
 
+#include "main/mtypes.h"
+
 #include "../ralloc.h"
 
 #include "program/hash_table.h"
@@ -182,6 +184,7 @@ struct glcpp_parser {
 	int new_line_number;
 	bool has_new_source_number;
 	int new_source_number;
+	bool is_gles;
 };
 
 struct gl_extensions;
@@ -197,7 +200,7 @@ glcpp_parser_destroy (glcpp_parser_t *parser);
 
 int
 glcpp_preprocess(void *ralloc_ctx, const char **shader, char **info_log,
-	   const struct gl_extensions *extensions, int api);
+	   const struct gl_extensions *extensions, struct gl_context *g_ctx);
 
 /* Functions for writing to the info log */
 
diff --git a/mesalib/src/glsl/glcpp/pp.c b/mesalib/src/glsl/glcpp/pp.c
index 11b29417b..789f7f941 100644
--- a/mesalib/src/glsl/glcpp/pp.c
+++ b/mesalib/src/glsl/glcpp/pp.c
@@ -70,92 +70,77 @@ glcpp_warning (YYLTYPE *locp, glcpp_parser_t *parser, const char *fmt, ...)
 				     &parser->info_log_length, "\n");
 }
 
-/* Searches backwards for '^ *#' from a given starting point. */
-static int
-in_directive(const char *shader, const char *ptr)
-{
-	assert(ptr >= shader);
-
-	/* Search backwards for '#'. If we find a \n first, it doesn't count */
-	for (; ptr >= shader && *ptr != '#'; ptr--) {
-		if (*ptr == '\n')
-			return 0;
-	}
-	if (ptr >= shader) {
-		/* Found '#'...look for spaces preceded by a newline */
-		for (ptr--; ptr >= shader && isblank(*ptr); ptr--);
-		// FIXME: I don't think the '\n' case can happen
-		if (ptr < shader || *ptr == '\n')
-			return 1;
-	}
-	return 0;
-}
-
-/* Remove any line continuation characters in preprocessing directives.
- * However, ignore any in GLSL code, as "There is no line continuation
- * character" (1.30 page 9) in GLSL.
+/* Remove any line continuation characters in the shader, (whether in
+ * preprocessing directives or in GLSL code).
  */
 static char *
 remove_line_continuations(glcpp_parser_t *ctx, const char *shader)
 {
-	int in_continued_line = 0;
-	int extra_newlines = 0;
 	char *clean = ralloc_strdup(ctx, "");
-	const char *search_start = shader;
-	const char *newline;
-	while ((newline = strchr(search_start, '\n')) != NULL) {
-		const char *backslash = NULL;
-
-		/* # of characters preceding the newline. */
-		int n = newline - shader;
-
-		/* Find the preceding '\', if it exists */
-		if (n >= 1 && newline[-1] == '\\')
-			backslash = newline - 1;
-		else if (n >= 2 && newline[-1] == '\r' && newline[-2] == '\\')
-			backslash = newline - 2;
-
-		/* Double backslashes don't count (the backslash is escaped) */
-		if (backslash != NULL && backslash[-1] == '\\') {
-			backslash = NULL;
-		}
-
-		if (backslash != NULL) {
-			/* We found a line continuation, but do we care? */
-			if (!in_continued_line) {
-				if (in_directive(shader, backslash)) {
-					in_continued_line = 1;
-					extra_newlines = 0;
-				}
-			}
-			if (in_continued_line) {
-				/* Copy everything before the \ */
-				ralloc_strncat(&clean, shader, backslash - shader);
+	const char *backslash, *newline, *search_start;
+	int collapsed_newlines = 0;
+
+	search_start = shader;
+
+	while (true) {
+		backslash = strchr(search_start, '\\');
+
+		/* If we have previously collapsed any line-continuations,
+		 * then we want to insert additional newlines at the next
+		 * occurrence of a newline character to avoid changing any
+		 * line numbers.
+		 */
+		if (collapsed_newlines) {
+			newline = strchr(search_start, '\n');
+			if (newline &&
+			    (backslash == NULL || newline < backslash))
+			{
+				ralloc_strncat(&clean, shader,
+					       newline - shader + 1);
+				while (collapsed_newlines--)
+					ralloc_strcat(&clean, "\n");
 				shader = newline + 1;
-				extra_newlines++;
+				search_start = shader;
 			}
-		} else if (in_continued_line) {
-			/* Copy everything up to and including the \n */
-			ralloc_strncat(&clean, shader, newline - shader + 1);
-			shader = newline + 1;
-			/* Output extra newlines to make line numbers match */
-			for (; extra_newlines > 0; extra_newlines--)
-				ralloc_strcat(&clean, "\n");
-			in_continued_line = 0;
 		}
-		search_start = newline + 1;
+
+		search_start = backslash + 1;
+
+		if (backslash == NULL)
+			break;
+
+		/* At each line continuation, (backslash followed by a
+		 * newline), copy all preceding text to the output, then
+		 * advance the shader pointer to the character after the
+		 * newline.
+		 */
+		if (backslash[1] == '\n' ||
+		    (backslash[1] == '\r' && backslash[2] == '\n'))
+		{
+			collapsed_newlines++;
+			ralloc_strncat(&clean, shader, backslash - shader);
+			if (backslash[1] == '\n')
+				shader = backslash + 2;
+			else
+				shader = backslash + 3;
+			search_start = shader;
+		}
 	}
+
 	ralloc_strcat(&clean, shader);
+
 	return clean;
 }
 
 int
 glcpp_preprocess(void *ralloc_ctx, const char **shader, char **info_log,
-	   const struct gl_extensions *extensions, int api)
+	   const struct gl_extensions *extensions, struct gl_context *gl_ctx)
 {
 	int errors;
-	glcpp_parser_t *parser = glcpp_parser_create (extensions, api);
-	*shader = remove_line_continuations(parser, *shader);
+	glcpp_parser_t *parser = glcpp_parser_create (extensions, gl_ctx->API);
+
+	if (! gl_ctx->Const.DisableGLSLLineContinuations)
+		*shader = remove_line_continuations(parser, *shader);
 
 	glcpp_lex_set_source_string (parser, *shader);
 
diff --git a/mesalib/src/glsl/glsl_parser_extras.h b/mesalib/src/glsl/glsl_parser_extras.h
index 01cf6a8d9..400cf9a2b 100644
--- a/mesalib/src/glsl/glsl_parser_extras.h
+++ b/mesalib/src/glsl/glsl_parser_extras.h
@@ -358,7 +358,7 @@ extern "C" {
 #endif
 
 extern int glcpp_preprocess(void *ctx, const char **shader, char **info_log,
-                      const struct gl_extensions *extensions, int api);
+                      const struct gl_extensions *extensions, struct gl_context *gl_ctx);
 
 extern void _mesa_destroy_shader_compiler(void);
 extern void _mesa_destroy_shader_compiler_caches(void);
diff --git a/mesalib/src/glsl/main.cpp b/mesalib/src/glsl/main.cpp
index d21b8cd2d..430a56512 100644
--- a/mesalib/src/glsl/main.cpp
+++ b/mesalib/src/glsl/main.cpp
@@ -157,7 +157,7 @@ compile_shader(struct gl_context *ctx, struct gl_shader *shader)
 
    const char *source = shader->Source;
    state->error = glcpp_preprocess(state, &source, &state->info_log,
-			     state->extensions, ctx->API) != 0;
+			     state->extensions, ctx) != 0;
 
    if (!state->error) {
       _mesa_glsl_lexer_ctor(state, source);
diff --git a/mesalib/src/glsl/test_optpass.cpp b/mesalib/src/glsl/test_optpass.cpp
index ce5df24d9..117b0b006 100644
--- a/mesalib/src/glsl/test_optpass.cpp
+++ b/mesalib/src/glsl/test_optpass.cpp
@@ -217,7 +217,7 @@ int test_optpass(int argc, char **argv)
       shader->Source = input.c_str();
       const char *source = shader->Source;
       state->error = glcpp_preprocess(state, &source, &state->info_log,
-                                state->extensions, ctx->API) != 0;
+                                state->extensions, ctx) != 0;
 
       if (!state->error) {
          _mesa_glsl_lexer_ctor(state, source);
diff --git a/mesalib/src/mapi/glapi/Makefile.am b/mesalib/src/mapi/glapi/Makefile.am
index 181a28a7c..bdb527d5c 100644
--- a/mesalib/src/mapi/glapi/Makefile.am
+++ b/mesalib/src/mapi/glapi/Makefile.am
@@ -58,12 +58,3 @@ endif
 noinst_LTLIBRARIES = libglapi.la
 
 libglapi_la_SOURCES = $(glapi_GLAPI_sources) $(glapi_ASM_sources) $(glapi_MAPI_sources)
-libglapi_la_LIBADD =
-libglapi_la_LDFLAGS =
-
-# Provide compatibility with scripts for the old Mesa build system for
-# a while by putting a link to libglapi.a here
-all-local: libglapi.la
-	ln -sf .libs/libglapi.a libglapi.a
-
-CLEANFILES = libglapi.a
diff --git a/mesalib/src/mapi/glapi/gen/ARB_get_program_binary.xml b/mesalib/src/mapi/glapi/gen/ARB_get_program_binary.xml
index 7db166564..e84d0678e 100644
--- a/mesalib/src/mapi/glapi/gen/ARB_get_program_binary.xml
+++ b/mesalib/src/mapi/glapi/gen/ARB_get_program_binary.xml
@@ -5,14 +5,13 @@
 
 <OpenGLAPI>
 
-<category name="GL_ARB_get_program_binary " number="96">
+<category name="GL_ARB_get_program_binary" number="96">
     <enum name="PROGRAM_BINARY_RETRIEVABLE_HINT"          value="0x8257"/>
     <enum name="PROGRAM_BINARY_LENGTH"                    value="0x8741"/>
     <enum name="NUM_PROGRAM_BINARY_FORMATS"               value="0x87FE"/>
     <enum name="PROGRAM_BINARY_FORMATS"                   value="0x87FF"/>
 
-    <function name="GetProgramBinary" offset="assign" static_dispatch="false"
-              es2="3.0" exec="skip">
+    <function name="GetProgramBinary" offset="assign" es2="3.0">
         <param name="program" type="GLuint"/>
         <param name="bufSize" type="GLsizei"/>
         <param name="length" type="GLsizei *"/>
@@ -20,16 +19,14 @@
         <param name="binary" type="GLvoid *"/>
     </function>
 
-    <function name="ProgramBinary" offset="assign" static_dispatch="false"
-              es2="3.0" exec="skip">
+    <function name="ProgramBinary" offset="assign" es2="3.0">
         <param name="program" type="GLuint"/>
         <param name="binaryFormat" type="GLenum"/>
         <param name="binary" type="const GLvoid *"/>
         <param name="length" type="GLsizei"/>
     </function>
 
-    <function name="ProgramParameteri" offset="assign" static_dispatch="false"
-              es2="3.0" exec="skip">
+    <function name="ProgramParameteri" offset="assign" es2="3.0">
         <param name="program" type="GLuint"/>
         <param name="pname" type="GLenum"/>
         <param name="value" type="GLint"/>
diff --git a/mesalib/src/mapi/glapi/gen/Makefile.am b/mesalib/src/mapi/glapi/gen/Makefile.am
index ff22c8e0d..f869d28e5 100644
--- a/mesalib/src/mapi/glapi/gen/Makefile.am
+++ b/mesalib/src/mapi/glapi/gen/Makefile.am
@@ -1,11 +1,3 @@
-# This file isn't used during a normal compilation since we don't want to
-# require Python in order to compile Mesa.
-# Instead, when the Mesa developers update/change the API interface it's
-# up to him/her to re-run this makefile and check in the newly generated files.
-
-
-TOP = ../../../..
-
 # These are the "official" xserver indent flags from utils/modular/x-indent.sh
 XORG_INDENT_FLAGS = -linux -bad -bap -blf -bli0 -cbi0 -cdw -nce -cs -i4 -lc80 -psl -nbbo \
     -nbc -psl -nbfda -nut -nss -T pointer -T ScreenPtr -T ScrnInfoPtr -T pointer \
@@ -26,10 +18,10 @@ XORG_INDENT_FLAGS = -linux -bad -bap -blf -bli0 -cbi0 -cdw -nce -cs -i4 -lc80 -p
     -T _XFUNCPROTOBEGIN -T _XFUNCPROTOEND -T _X_EXPORT
 
 
-MESA_DIR = $(TOP)/src/mesa
-MESA_GLAPI_DIR = $(TOP)/src/mapi/glapi
-MESA_MAPI_DIR = $(TOP)/src/mapi/mapi
-MESA_GLX_DIR = $(TOP)/src/glx
+MESA_DIR = $(top_srcdir)/src/mesa
+MESA_GLAPI_DIR = $(top_srcdir)/src/mapi/glapi
+MESA_MAPI_DIR = $(top_srcdir)/src/mapi/mapi
+MESA_GLX_DIR = $(top_srcdir)/src/glx
 
 MESA_GLAPI_OUTPUTS = \
 	$(MESA_GLAPI_DIR)/glapi_mapi_tmp.h \
diff --git a/mesalib/src/mapi/glapi/gen/gl_API.xml b/mesalib/src/mapi/glapi/gen/gl_API.xml
index 4aa8b15e3..adbeea613 100755
--- a/mesalib/src/mapi/glapi/gen/gl_API.xml
+++ b/mesalib/src/mapi/glapi/gen/gl_API.xml
@@ -8269,20 +8269,18 @@
   </function>
 </category>
 
+<!-- ARB extensions #95...#108 -->
+
 <xi:include href="ARB_ES2_compatibility.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
-<!-- ARB extensions #96...#103 -->
+<xi:include href="ARB_get_program_binary.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
 <xi:include href="ARB_debug_output.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
 <xi:include href="ARB_robustness.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
-<!-- ARB extensions #106 -->
-
 <xi:include href="ARB_base_instance.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
-<!-- ARB extensions #108 -->
-
 <category name="GL_ARB_transform_feedback_instanced" number="109">
   <function name="DrawTransformFeedbackInstanced" offset="assign"
             exec="dynamic">
@@ -12994,6 +12992,4 @@
 
 <xi:include href="EXT_transform_feedback.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
 
-<xi:include href="ARB_get_program_binary.xml" xmlns:xi="http://www.w3.org/2001/XInclude"/>
-
 </OpenGLAPI>
diff --git a/mesalib/src/mesa/Makefile.am b/mesalib/src/mesa/Makefile.am
index 9809ee437..41483dd63 100644
--- a/mesalib/src/mesa/Makefile.am
+++ b/mesalib/src/mesa/Makefile.am
@@ -128,20 +128,9 @@ libmesagallium_la_LIBADD = \
         $(top_builddir)/src/mesa/program/libprogram.la \
         $()
 
-libmesagallium_la_LDFLAGS =
-
-if HAVE_GALLIUM
-# Provide compatibility with scripts for the old Mesa build system for
-# a while by putting a link to the library in the current directory.
-all-local: $(noinst_LTLIBRARIES)
-	ln -f .libs/libmesagallium.a .
-endif
-
-CLEANFILES += libmesagallium.a
-
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = gl.pc
 
 # Emacs tags
 tags:
-	etags `find . -name \*.[ch]` $(TOP)/include/GL/*.h
+	etags `find . -name \*.[ch]` $(top_srcdir)/include/GL/*.h
diff --git a/mesalib/src/mesa/drivers/SConscript b/mesalib/src/mesa/drivers/SConscript
index f1c4da6b8..6dcc50655 100644
--- a/mesalib/src/mesa/drivers/SConscript
+++ b/mesalib/src/mesa/drivers/SConscript
@@ -5,5 +5,8 @@ SConscript('osmesa/SConscript')
 if env['x11']:
     SConscript('x11/SConscript')
 
+if env['drm']:
+    SConscript('dri/common/xmlpool/SConscript')
+
 if env['platform'] == 'windows':
     SConscript('windows/gdi/SConscript')
diff --git a/mesalib/src/mesa/drivers/dri/Android.mk b/mesalib/src/mesa/drivers/dri/Android.mk
index d6196bb43..88629531a 100644
--- a/mesalib/src/mesa/drivers/dri/Android.mk
+++ b/mesalib/src/mesa/drivers/dri/Android.mk
@@ -38,6 +38,7 @@ MESA_DRI_CFLAGS := \
 	-DHAVE_ANDROID_PLATFORM
 
 MESA_DRI_C_INCLUDES := \
+	$(call intermediates-dir-for,STATIC_LIBRARIES,libmesa_dri_common) \
 	$(addprefix $(MESA_TOP)/, $(mesa_dri_common_INCLUDES)) \
 	$(DRM_TOP) \
 	$(DRM_TOP)/include/drm \
@@ -56,6 +57,9 @@ MESA_DRI_SHARED_LIBRARIES := \
 	libglapi \
 	liblog
 
+# All DRI modules must add this to LOCAL_GENERATED_SOURCES.
+MESA_DRI_OPTIONS_H := $(call intermediates-dir-for,STATIC_LIBRARIES,libmesa_dri_common)/xmlpool/options.h
+
 #-----------------------------------------------
 # Build drivers and libmesa_dri_common
 
diff --git a/mesalib/src/mesa/drivers/dri/common/Android.mk b/mesalib/src/mesa/drivers/dri/common/Android.mk
index 76464a153..f428c3855 100644
--- a/mesalib/src/mesa/drivers/dri/common/Android.mk
+++ b/mesalib/src/mesa/drivers/dri/common/Android.mk
@@ -34,8 +34,54 @@ include $(LOCAL_PATH)/Makefile.sources
 LOCAL_MODULE := libmesa_dri_common
 LOCAL_MODULE_CLASS := STATIC_LIBRARIES
 
-LOCAL_C_INCLUDES := $(MESA_DRI_C_INCLUDES)
+intermediates := $(call local-intermediates-dir)
+
+LOCAL_C_INCLUDES := \
+    $(intermediates) \
+    $(MESA_DRI_C_INCLUDES)
+
 LOCAL_SRC_FILES := $(mesa_dri_common_SOURCES)
 
+LOCAL_GENERATED_SOURCES := \
+    $(intermediates)/xmlpool/options.h
+
+#
+# Generate options.h from gettext translations.
+#
+
+MESA_DRI_OPTIONS_LANGS := de es nl fr sv
+POT := $(intermediates)/xmlpool.pot
+
+$(POT): $(LOCAL_PATH)/xmlpool/t_options.h
+	@mkdir -p $(dir $@)
+	xgettext -L C --from-code utf-8 -o $@ $<
+
+$(intermediates)/xmlpool/%.po: $(LOCAL_PATH)/xmlpool/%.po $(POT)
+	lang=$(basename $(notdir $@)); \
+	mkdir -p $(dir $@); \
+	if [ -f $< ]; then \
+		msgmerge -o $@ $^; \
+	else \
+		msginit -i $(POT) \
+			-o $@ \
+			--locale=$$lang \
+			--no-translator; \
+		sed -i -e 's/charset=.*\\n/charset=UTF-8\\n/' $@; \
+	fi
+
+$(intermediates)/xmlpool/%/LC_MESSAGES/options.mo: $(intermediates)/xmlpool/%.po
+	mkdir -p $(dir $@)
+	msgfmt -o $@ $<
+
+$(intermediates)/xmlpool/options.h: PRIVATE_SCRIPT := $(LOCAL_PATH)/xmlpool/gen_xmlpool.py
+$(intermediates)/xmlpool/options.h: PRIVATE_LOCALEDIR := $(intermediates)/xmlpool
+$(intermediates)/xmlpool/options.h: PRIVATE_TEMPLATE_HEADER := $(LOCAL_PATH)/xmlpool/t_options.h
+$(intermediates)/xmlpool/options.h: PRIVATE_MO_FILES := $(MESA_DRI_OPTIONS_LANGS:%=$(intermediates)/xmlpool/%/LC_MESSAGES/options.mo)
+$(intermediates)/xmlpool/options.h: $(PRIVATE_SCRIPT) $(PRIVATE_TEMPLATE_HEADER) $(PRIVATE_MO_FILES)
+	mkdir -p $(dir $@)
+	mkdir -p $(PRIVATE_LOCALEDIR)
+	$(MESA_PYTHON2) $(PRIVATE_SCRIPT) $(PRIVATE_TEMPLATE_HEADER) \
+		$(PRIVATE_LOCALEDIR) $(MESA_DRI_OPTIONS_LANGS) > $@
+
 include $(MESA_COMMON_MK)
 include $(BUILD_STATIC_LIBRARY)
diff --git a/mesalib/src/mesa/drivers/dri/common/Makefile.am b/mesalib/src/mesa/drivers/dri/common/Makefile.am
index a662919b5..dfc8f3b7a 100644
--- a/mesalib/src/mesa/drivers/dri/common/Makefile.am
+++ b/mesalib/src/mesa/drivers/dri/common/Makefile.am
@@ -19,6 +19,8 @@
 # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 # IN THE SOFTWARE.
 
+SUBDIRS = xmlpool
+
 AM_CFLAGS = \
 	-I$(top_srcdir)/include \
 	-I$(top_srcdir)/src/ \
diff --git a/mesalib/src/mesa/drivers/dri/common/drirc b/mesalib/src/mesa/drivers/dri/common/drirc
index cf13cdb80..a13941f68 100644
--- a/mesalib/src/mesa/drivers/dri/common/drirc
+++ b/mesalib/src/mesa/drivers/dri/common/drirc
@@ -22,5 +22,8 @@
         <application name="Unigine OilRush (64-bit)" executable="OilRush_x64">
             <option name="disable_blend_func_extended" value="true" />
 	</application>
+        <application name="Savage 2" executable="savage2.bin">
+            <option name="disable_glsl_line_continuations" value="true" />
+        </application>
     </device>
 </driconf>
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore b/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore
index a5a437849..f6ba5c849 100644
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore
@@ -3,3 +3,6 @@ es
 fr
 nl
 sv
+options.h
+Makefile
+xmlpool.pot
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile b/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile.am
index b71629e9f..b99df40d8 100644
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile.am
@@ -54,43 +54,41 @@ POT=xmlpool.pot
 
 all: options.h
 
-# Only intermediate files are cleaned up. options.h is not deleted because
-# it's in CVS. 
+# All generated files are cleaned up.
 clean:
-	-rm -f $(POT) *~
+	-rm -f $(POT) options.h *~
 	-rm -rf $(LANGS)
 
 # Default target options.h
-options.h: t_options.h mo
-	$(PYTHON2) $(PYTHON_FLAGS) gen_xmlpool.py $(LANGS) > options.h
+options.h: LOCALEDIR := .
+options.h: t_options.h $(MOS)
+	$(AM_V_GEN) $(PYTHON2) $(PYTHON_FLAGS) $(srcdir)/gen_xmlpool.py $(srcdir)/t_options.h $(LOCALEDIR) $(LANGS) > options.h
 
 # Update .mo files from the corresponding .po files.
-mo:
-	@for mo in $(MOS); do \
-		lang=$${mo%%/*}; \
-		echo "Updating $$mo from $$lang.po."; \
-		mkdir -p $${mo%/*}; \
-		msgfmt -o $$mo $$lang.po; \
-	done
+%/LC_MESSAGES/options.mo: %.po
+	@mo="$@" \
+	lang=$${mo%%/*}; \
+	echo "Updating ($$lang) $@ from $?."; \
+	mkdir -p $$lang/LC_MESSAGES; \
+	msgfmt -o $@ $?
 
 # Use this target to create or update .po files with new messages in
 # driconf.py.
-po: $(POS)
+po: $(POT)
+	@for po in $(POS); do \
+		if [ -f $$po ]; then \
+			echo "Merging new strings from $(POT) into $@."; \
+			mv $$po $$po~; \
+			msgmerge -o $$po $$po~ $(POT); \
+		else \
+			echo "Initializing $$po from $(POT)."; \
+			msginit -i $(POT) -o $$po~ --locale=$*; \
+			sed -e 's/charset=.*\\n/charset=UTF-8\\n/' $$po~ > $$po; \
+		fi \
+	done
 
 pot: $(POT)
 
 # Extract message catalog from driconf.py.
 $(POT): t_options.h
 	xgettext -L C --from-code utf-8 -o $(POT) t_options.h
-
-# Create or update a .po file for a specific language.
-%.po: $(POT)
-	@if [ -f $@ ]; then \
-		echo "Merging new strings from $(POT) into $@."; \
-		mv $@ $@~; \
-		msgmerge -o $@ $@~ $(POT); \
-	else \
-		echo "Initializing $@ from $(POT)."; \
-		msginit -i $(POT) -o $@~ --locale=$*; \
-		sed -e 's/charset=.*\\n/charset=UTF-8\\n/' $@~ > $@; \
-	fi
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/SConscript b/mesalib/src/mesa/drivers/dri/common/xmlpool/SConscript
new file mode 100644
index 000000000..fa42554d3
--- /dev/null
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/SConscript
@@ -0,0 +1,14 @@
+Import('*')
+
+from sys import executable as python_cmd
+
+LOCALEDIR = env.Dir('.').srcnode().abspath
+
+xmlpool_options, = env.CodeGenerate(
+    target = 'options.h',
+    script = 'gen_xmlpool.py',
+    source = ['t_options.h'],
+    command = python_cmd + ' $SCRIPT $SOURCE ' + LOCALEDIR + ' > $TARGET'
+)
+
+Export('xmlpool_options')
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/de.po b/mesalib/src/mesa/drivers/dri/common/xmlpool/de.po
index 724237929..a87c8d513 100644
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/de.po
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/de.po
@@ -207,14 +207,14 @@ msgid ""
 "Morphological anti-aliasing based on Jimenez\\' MLAA. 0 to disable, 8 for "
 "default quality"
 msgstr "Morphologische Kantenglättung (Anti-Aliasing) basierend auf "
-"Jimenez\' MLAA. 0 für deaktiviert, 8 für Standardqualität"
+"Jimenez' MLAA. 0 für deaktiviert, 8 für Standardqualität"
 
 #: t_options.h:221
 msgid ""
 "Morphological anti-aliasing based on Jimenez\\' MLAA. 0 to disable, 8 for "
 "default quality. Color version, usable with 2d GL apps"
 msgstr "Morphologische Kantenglättung (Anti-Aliasing) basierend auf "
-"Jimenez\' MLAA. 0 für deaktiviert, 8 für Standardqualität. "
+"Jimenez' MLAA. 0 für deaktiviert, 8 für Standardqualität. "
 "Farbversion, für 2D-Anwendungen"
 
 #: t_options.h:226
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py b/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py
index 7398c4cd0..acfdcf48a 100644
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py
@@ -1,11 +1,24 @@
 #!/usr/bin/python
 
+#
+# Usage:
+#     gen_xmlpool.py /path/to/t_option.h localedir lang lang lang ...
+#
+# For each given language, this script expects to find a .mo file at
+# `{localedir}/{language}/LC_MESSAGES/options.mo`.
+#
+
 import sys
 import gettext
 import re
 
+# Path to t_options.h
+template_header_path = sys.argv[1]
+
+localedir = sys.argv[2]
+
 # List of supported languages
-languages = sys.argv[1:]
+languages = sys.argv[3:]
 
 # Escape special characters in C strings
 def escapeCString (s):
@@ -134,7 +147,7 @@ def expandMatches (matches, translations, end=None):
 translations = [("en", gettext.NullTranslations())]
 for lang in languages:
     try:
-        trans = gettext.translation ("options", ".", [lang])
+        trans = gettext.translation ("options", localedir, [lang])
     except IOError:
         sys.stderr.write ("Warning: language '%s' not found.\n" % lang)
         continue
@@ -155,7 +168,7 @@ print \
 
 # Process the options template and generate options.h with all
 # translations.
-template = file ("t_options.h", "r")
+template = file (template_header_path, "r")
 descMatches = []
 for line in template:
     if len(descMatches) > 0:
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/options.h b/mesalib/src/mesa/drivers/dri/common/xmlpool/options.h
deleted file mode 100644
index 112a046d2..000000000
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/options.h
+++ /dev/null
@@ -1,638 +0,0 @@
-/***********************************************************************
- ***        THIS FILE IS GENERATED AUTOMATICALLY. DON'T EDIT!        ***
- ***********************************************************************/
-/*
- * XML DRI client-side driver configuration
- * Copyright (C) 2003 Felix Kuehling
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included
- * in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * FELIX KUEHLING, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
- * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
- * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- * 
- */
-/**
- * \file t_options.h
- * \brief Templates of common options
- * \author Felix Kuehling
- *
- * This file defines macros for common options that can be used to
- * construct driConfigOptions in the drivers. This file is only a
- * template containing English descriptions for options wrapped in
- * gettext(). xgettext can be used to extract translatable
- * strings. These strings can then be translated by anyone familiar
- * with GNU gettext. gen_xmlpool.py takes this template and fills in
- * all the translations. The result (options.h) is included by
- * xmlpool.h which in turn can be included by drivers.
- *
- * The macros used to describe otions in this file are defined in
- * ../xmlpool.h.
- */
-
-/* This is needed for xgettext to extract translatable strings.
- * gen_xmlpool.py will discard this line. */
-/* #include <libintl.h>
- * commented out by gen_xmlpool.py */
-
-/*
- * predefined option sections and options with multi-lingual descriptions
- */
-
-/** \brief Debugging options */
-#define DRI_CONF_SECTION_DEBUG \
-DRI_CONF_SECTION_BEGIN \
-	DRI_CONF_DESC(en,"Debugging") \
-	DRI_CONF_DESC(de,"Fehlersuche") \
-	DRI_CONF_DESC(es,"Depurando") \
-	DRI_CONF_DESC(nl,"Debuggen") \
-	DRI_CONF_DESC(fr,"Debogage") \
-	DRI_CONF_DESC(sv,"Felsökning")
-
-#define DRI_CONF_NO_RAST(def) \
-DRI_CONF_OPT_BEGIN(no_rast,bool,def) \
-        DRI_CONF_DESC(en,"Disable 3D acceleration") \
-        DRI_CONF_DESC(de,"3D-Beschleunigung abschalten") \
-        DRI_CONF_DESC(es,"Desactivar aceleración 3D") \
-        DRI_CONF_DESC(nl,"3D versnelling uitschakelen") \
-        DRI_CONF_DESC(fr,"Désactiver l'accélération 3D") \
-        DRI_CONF_DESC(sv,"Inaktivera 3D-accelerering") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PERFORMANCE_BOXES(def) \
-DRI_CONF_OPT_BEGIN(performance_boxes,bool,def) \
-        DRI_CONF_DESC(en,"Show performance boxes") \
-        DRI_CONF_DESC(de,"Zeige Performanceboxen") \
-        DRI_CONF_DESC(es,"Mostrar cajas de rendimiento") \
-        DRI_CONF_DESC(nl,"Laat prestatie boxjes zien") \
-        DRI_CONF_DESC(fr,"Afficher les boîtes de performance") \
-        DRI_CONF_DESC(sv,"Visa prestandarutor") \
-DRI_CONF_OPT_END
-
-
-/** \brief Texture-related options */
-#define DRI_CONF_SECTION_QUALITY \
-DRI_CONF_SECTION_BEGIN \
-	DRI_CONF_DESC(en,"Image Quality") \
-	DRI_CONF_DESC(de,"Bildqualität") \
-	DRI_CONF_DESC(es,"Calidad de imagen") \
-	DRI_CONF_DESC(nl,"Beeldkwaliteit") \
-	DRI_CONF_DESC(fr,"Qualité d'image") \
-	DRI_CONF_DESC(sv,"Bildkvalitet")
-
-#define DRI_CONF_EXCESS_MIPMAP(def) \
-DRI_CONF_OPT_BEGIN(excess_mipmap,bool,def) \
-	DRI_CONF_DESC(en,"Enable extra mipmap level") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_TEXTURE_DEPTH_FB       0
-#define DRI_CONF_TEXTURE_DEPTH_32       1
-#define DRI_CONF_TEXTURE_DEPTH_16       2
-#define DRI_CONF_TEXTURE_DEPTH_FORCE_16 3
-#define DRI_CONF_TEXTURE_DEPTH(def) \
-DRI_CONF_OPT_BEGIN_V(texture_depth,enum,def,"0:3") \
-	DRI_CONF_DESC_BEGIN(en,"Texture color depth") \
-                DRI_CONF_ENUM(0,"Prefer frame buffer color depth") \
-                DRI_CONF_ENUM(1,"Prefer 32 bits per texel") \
-                DRI_CONF_ENUM(2,"Prefer 16 bits per texel") \
-                DRI_CONF_ENUM(3,"Force 16 bits per texel") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(de,"Texturfarbtiefe") \
-                DRI_CONF_ENUM(0,"Bevorzuge Farbtiefe des Framebuffers") \
-                DRI_CONF_ENUM(1,"Bevorzuge 32 bits pro Texel") \
-                DRI_CONF_ENUM(2,"Bevorzuge 16 bits pro Texel") \
-                DRI_CONF_ENUM(3,"Erzwinge 16 bits pro Texel") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(es,"Profundidad de color de textura") \
-                DRI_CONF_ENUM(0,"Preferir profundidad de color del ”framebuffer“") \
-                DRI_CONF_ENUM(1,"Preferir 32 bits por texel") \
-                DRI_CONF_ENUM(2,"Preferir 16 bits por texel") \
-                DRI_CONF_ENUM(3,"Forzar a 16 bits por texel") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(nl,"Textuurkleurendiepte") \
-                DRI_CONF_ENUM(0,"Prefereer kaderbufferkleurdiepte") \
-                DRI_CONF_ENUM(1,"Prefereer 32 bits per texel") \
-                DRI_CONF_ENUM(2,"Prefereer 16 bits per texel") \
-                DRI_CONF_ENUM(3,"Dwing 16 bits per texel af") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(fr,"Profondeur de texture") \
-                DRI_CONF_ENUM(0,"Profondeur de couleur") \
-                DRI_CONF_ENUM(1,"Préférer 32 bits par texel") \
-                DRI_CONF_ENUM(2,"Prérérer 16 bits par texel") \
-                DRI_CONF_ENUM(3,"Forcer 16 bits par texel") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(sv,"Färgdjup för texturer") \
-                DRI_CONF_ENUM(0,"Föredra färgdjupet för framebuffer") \
-                DRI_CONF_ENUM(1,"Föredra 32 bitar per texel") \
-                DRI_CONF_ENUM(2,"Föredra 16 bitar per texel") \
-                DRI_CONF_ENUM(3,"Tvinga 16 bitar per texel") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_DEF_MAX_ANISOTROPY(def,range) \
-DRI_CONF_OPT_BEGIN_V(def_max_anisotropy,float,def,range) \
-        DRI_CONF_DESC(en,"Initial maximum value for anisotropic texture filtering") \
-        DRI_CONF_DESC(de,"Initialer Maximalwert für anisotropische Texturfilterung") \
-        DRI_CONF_DESC(es,"Valor máximo inicial para filtrado anisotrópico de textura") \
-        DRI_CONF_DESC(nl,"Initïele maximum waarde voor anisotrophische textuur filtering") \
-        DRI_CONF_DESC(fr,"Valeur maximale initiale pour le filtrage anisotropique de texture") \
-        DRI_CONF_DESC(sv,"Initialt maximalt värde för anisotropisk texturfiltrering") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_NO_NEG_LOD_BIAS(def) \
-DRI_CONF_OPT_BEGIN(no_neg_lod_bias,bool,def) \
-        DRI_CONF_DESC(en,"Forbid negative texture LOD bias") \
-        DRI_CONF_DESC(de,"Verbiete negative Textur-Detailgradverschiebung") \
-        DRI_CONF_DESC(es,"Prohibir valores negativos de Nivel De Detalle (LOD) de texturas") \
-        DRI_CONF_DESC(nl,"Verbied negatief niveau detailonderscheid (LOD) van texturen") \
-        DRI_CONF_DESC(fr,"Interdire le LOD bias negatif") \
-        DRI_CONF_DESC(sv,"Förbjud negativ LOD-kompensation för texturer") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_FORCE_S3TC_ENABLE(def) \
-DRI_CONF_OPT_BEGIN(force_s3tc_enable,bool,def) \
-        DRI_CONF_DESC(en,"Enable S3TC texture compression even if software support is not available") \
-        DRI_CONF_DESC(de,"Aktiviere S3TC Texturkomprimierung auch wenn die nötige Softwareunterstützung fehlt") \
-        DRI_CONF_DESC(es,"Activar la compresión de texturas S3TC incluso si el soporte por software no está disponible") \
-        DRI_CONF_DESC(nl,"Schakel S3TC textuurcompressie in, zelfs als softwareondersteuning niet aanwezig is") \
-        DRI_CONF_DESC(fr,"Activer la compression de texture S3TC même si le support logiciel est absent") \
-        DRI_CONF_DESC(sv,"Aktivera S3TC-texturkomprimering även om programvarustöd saknas") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_COLOR_REDUCTION_ROUND 0
-#define DRI_CONF_COLOR_REDUCTION_DITHER 1
-#define DRI_CONF_COLOR_REDUCTION(def) \
-DRI_CONF_OPT_BEGIN_V(color_reduction,enum,def,"0:1") \
-        DRI_CONF_DESC_BEGIN(en,"Initial color reduction method") \
-                DRI_CONF_ENUM(0,"Round colors") \
-                DRI_CONF_ENUM(1,"Dither colors") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(de,"Initiale Farbreduktionsmethode") \
-                DRI_CONF_ENUM(0,"Farben runden") \
-                DRI_CONF_ENUM(1,"Farben rastern") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(es,"Método inicial de reducción de color") \
-                DRI_CONF_ENUM(0,"Colores redondeados") \
-                DRI_CONF_ENUM(1,"Colores suavizados") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(nl,"Initïele kleurreductie methode") \
-                DRI_CONF_ENUM(0,"Rond kleuren af") \
-                DRI_CONF_ENUM(1,"Rasteriseer kleuren") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(fr,"Technique de réduction de couleurs") \
-                DRI_CONF_ENUM(0,"Arrondir les valeurs de couleur") \
-                DRI_CONF_ENUM(1,"Tramer les couleurs") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(sv,"Initial färgminskningsmetod") \
-                DRI_CONF_ENUM(0,"Avrunda färger") \
-                DRI_CONF_ENUM(1,"Utjämna färger") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_ROUND_TRUNC 0
-#define DRI_CONF_ROUND_ROUND 1
-#define DRI_CONF_ROUND_MODE(def) \
-DRI_CONF_OPT_BEGIN_V(round_mode,enum,def,"0:1") \
-	DRI_CONF_DESC_BEGIN(en,"Color rounding method") \
-                DRI_CONF_ENUM(0,"Round color components downward") \
-                DRI_CONF_ENUM(1,"Round to nearest color") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(de,"Farbrundungsmethode") \
-                DRI_CONF_ENUM(0,"Farbkomponenten abrunden") \
-                DRI_CONF_ENUM(1,"Zur ähnlichsten Farbe runden") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(es,"Método de redondeo de colores") \
-                DRI_CONF_ENUM(0,"Redondear hacia abajo los componentes de color") \
-                DRI_CONF_ENUM(1,"Redondear al color más cercano") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(nl,"Kleurafrondingmethode") \
-                DRI_CONF_ENUM(0,"Rond kleurencomponenten af naar beneden") \
-                DRI_CONF_ENUM(1,"Rond af naar dichtsbijzijnde kleur") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(fr,"Méthode d'arrondi des couleurs") \
-                DRI_CONF_ENUM(0,"Arrondi à l'inférieur") \
-                DRI_CONF_ENUM(1,"Arrondi au plus proche") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(sv,"Färgavrundningsmetod") \
-                DRI_CONF_ENUM(0,"Avrunda färdkomponenter nedåt") \
-                DRI_CONF_ENUM(1,"Avrunda till närmsta färg") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_DITHER_XERRORDIFF 0
-#define DRI_CONF_DITHER_XERRORDIFFRESET 1
-#define DRI_CONF_DITHER_ORDERED 2
-#define DRI_CONF_DITHER_MODE(def) \
-DRI_CONF_OPT_BEGIN_V(dither_mode,enum,def,"0:2") \
-	DRI_CONF_DESC_BEGIN(en,"Color dithering method") \
-                DRI_CONF_ENUM(0,"Horizontal error diffusion") \
-                DRI_CONF_ENUM(1,"Horizontal error diffusion, reset error at line start") \
-                DRI_CONF_ENUM(2,"Ordered 2D color dithering") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(de,"Farbrasterungsmethode") \
-                DRI_CONF_ENUM(0,"Horizontale Fehlerstreuung") \
-                DRI_CONF_ENUM(1,"Horizontale Fehlerstreuung, Fehler am Zeilenanfang zurücksetzen") \
-                DRI_CONF_ENUM(2,"Geordnete 2D Farbrasterung") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(es,"Método de suavizado de color") \
-                DRI_CONF_ENUM(0,"Difusión de error horizontal") \
-                DRI_CONF_ENUM(1,"Difusión de error horizontal, reiniciar error al comienzo de línea") \
-                DRI_CONF_ENUM(2,"Suavizado de color 2D ordenado") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(nl,"Kleurrasteriseringsmethode") \
-                DRI_CONF_ENUM(0,"Horizontale foutdiffusie") \
-                DRI_CONF_ENUM(1,"Horizontale foutdiffusie, zet fout bij lijnbegin terug") \
-                DRI_CONF_ENUM(2,"Geordende 2D kleurrasterisering") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(fr,"Méthode de tramage") \
-                DRI_CONF_ENUM(0,"Diffusion d'erreur horizontale") \
-                DRI_CONF_ENUM(1,"Diffusion d'erreur horizontale, réinitialisé pour chaque ligne") \
-                DRI_CONF_ENUM(2,"Tramage ordonné des couleurs") \
-        DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(sv,"Färgutjämningsmetod") \
-                DRI_CONF_ENUM(0,"Horisontell felspridning") \
-                DRI_CONF_ENUM(1,"Horisontell felspridning, återställ fel vid radbörjan") \
-                DRI_CONF_ENUM(2,"Ordnad 2D-färgutjämning") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_FLOAT_DEPTH(def) \
-DRI_CONF_OPT_BEGIN(float_depth,bool,def) \
-        DRI_CONF_DESC(en,"Floating point depth buffer") \
-        DRI_CONF_DESC(de,"Fließkomma z-Puffer") \
-        DRI_CONF_DESC(es,"Búfer de profundidad en coma flotante") \
-        DRI_CONF_DESC(nl,"Dieptebuffer als commagetal") \
-        DRI_CONF_DESC(fr,"Z-buffer en virgule flottante") \
-        DRI_CONF_DESC(sv,"Buffert för flytande punktdjup") \
-DRI_CONF_OPT_END
-
-/** \brief Performance-related options */
-#define DRI_CONF_SECTION_PERFORMANCE \
-DRI_CONF_SECTION_BEGIN \
-        DRI_CONF_DESC(en,"Performance") \
-        DRI_CONF_DESC(de,"Leistung") \
-        DRI_CONF_DESC(es,"Rendimiento") \
-        DRI_CONF_DESC(nl,"Prestatie") \
-        DRI_CONF_DESC(fr,"Performance") \
-        DRI_CONF_DESC(sv,"Prestanda")
-
-#define DRI_CONF_TCL_SW 0
-#define DRI_CONF_TCL_PIPELINED 1
-#define DRI_CONF_TCL_VTXFMT 2
-#define DRI_CONF_TCL_CODEGEN 3
-#define DRI_CONF_TCL_MODE(def) \
-DRI_CONF_OPT_BEGIN_V(tcl_mode,enum,def,"0:3") \
-        DRI_CONF_DESC_BEGIN(en,"TCL mode (Transformation, Clipping, Lighting)") \
-                DRI_CONF_ENUM(0,"Use software TCL pipeline") \
-                DRI_CONF_ENUM(1,"Use hardware TCL as first TCL pipeline stage") \
-                DRI_CONF_ENUM(2,"Bypass the TCL pipeline") \
-                DRI_CONF_ENUM(3,"Bypass the TCL pipeline with state-based machine code generated on-the-fly") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(de,"TCL-Modus (Transformation, Clipping, Licht)") \
-                DRI_CONF_ENUM(0,"Benutze die Software-TCL-Pipeline") \
-                DRI_CONF_ENUM(1,"Benutze Hardware TCL als erste Stufe der TCL-Pipeline") \
-                DRI_CONF_ENUM(2,"Umgehe die TCL-Pipeline") \
-                DRI_CONF_ENUM(3,"Umgehe die TCL-Pipeline mit zur Laufzeit erzeugtem, zustandsbasiertem Maschinencode") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(es,"Modo TCL (Transformación, Recorte, Iluminación)") \
-                DRI_CONF_ENUM(0,"Usar tubería TCL por software") \
-                DRI_CONF_ENUM(1,"Usar TCL por hardware en la primera fase de la tubería TCL") \
-                DRI_CONF_ENUM(2,"Pasar por alto la tubería TCL") \
-                DRI_CONF_ENUM(3,"Pasar por alto la tubería TCL con código máquina basado en estados generado al vuelo") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(nl,"TCL-modus (Transformatie, Clipping, Licht)") \
-                DRI_CONF_ENUM(0,"Gebruik software TCL pijpleiding") \
-                DRI_CONF_ENUM(1,"Gebruik hardware TCL as eerste TCL pijpleiding trap") \
-                DRI_CONF_ENUM(2,"Omzeil de TCL pijpleiding") \
-                DRI_CONF_ENUM(3,"Omzeil de TCL pijpleiding met staatgebaseerde machinecode die tijdens executie gegenereerd wordt") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(fr,"Mode de TCL (Transformation, Clipping, Eclairage)") \
-                DRI_CONF_ENUM(0,"Utiliser un pipeline TCL logiciel") \
-                DRI_CONF_ENUM(1,"Utiliser le TCL matériel pour le premier niveau de pipeline") \
-                DRI_CONF_ENUM(2,"Court-circuiter le pipeline TCL") \
-                DRI_CONF_ENUM(3,"Court-circuiter le pipeline TCL par une machine à états qui génère le codede TCL à la volée") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(sv,"TCL-läge (Transformation, Clipping, Lighting)") \
-                DRI_CONF_ENUM(0,"Använd programvaru-TCL-rörledning") \
-                DRI_CONF_ENUM(1,"Använd maskinvaru-TCL som första TCL-rörledningssteg") \
-                DRI_CONF_ENUM(2,"Kringgå TCL-rörledningen") \
-                DRI_CONF_ENUM(3,"Kringgå TCL-rörledningen med tillståndsbaserad maskinkod som direktgenereras") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_FTHROTTLE_BUSY 0
-#define DRI_CONF_FTHROTTLE_USLEEPS 1
-#define DRI_CONF_FTHROTTLE_IRQS 2
-#define DRI_CONF_FTHROTTLE_MODE(def) \
-DRI_CONF_OPT_BEGIN_V(fthrottle_mode,enum,def,"0:2") \
-        DRI_CONF_DESC_BEGIN(en,"Method to limit rendering latency") \
-                DRI_CONF_ENUM(0,"Busy waiting for the graphics hardware") \
-                DRI_CONF_ENUM(1,"Sleep for brief intervals while waiting for the graphics hardware") \
-                DRI_CONF_ENUM(2,"Let the graphics hardware emit a software interrupt and sleep") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(de,"Methode zur Begrenzung der Bildverzögerung") \
-                DRI_CONF_ENUM(0,"Aktives Warten auf die Grafikhardware") \
-                DRI_CONF_ENUM(1,"Kurze Schlafintervalle beim Warten auf die Grafikhardware") \
-                DRI_CONF_ENUM(2,"Die Grafikhardware eine Softwareunterbrechnung erzeugen lassen und schlafen") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(es,"Método para limitar la latencia de rénder") \
-                DRI_CONF_ENUM(0,"Esperar activamente al hardware gráfico") \
-                DRI_CONF_ENUM(1,"Dormir en intervalos cortos mientras se espera al hardware gráfico") \
-                DRI_CONF_ENUM(2,"Permitir que el hardware gráfico emita una interrupción de software y duerma") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(nl,"Methode om beeldopbouwvertraging te onderdrukken") \
-                DRI_CONF_ENUM(0,"Actief wachten voor de grafische hardware") \
-                DRI_CONF_ENUM(1,"Slaap voor korte intervallen tijdens het wachten op de grafische hardware") \
-                DRI_CONF_ENUM(2,"Laat de grafische hardware een software onderbreking uitzenden en in slaap vallen") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(fr,"Méthode d'attente de la carte graphique") \
-                DRI_CONF_ENUM(0,"Attente active de la carte graphique") \
-                DRI_CONF_ENUM(1,"Attente utilisant usleep()") \
-                DRI_CONF_ENUM(2,"Utiliser les interruptions") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(sv,"Metod för att begränsa renderingslatens") \
-                DRI_CONF_ENUM(0,"Upptagen med att vänta på grafikhårdvaran") \
-                DRI_CONF_ENUM(1,"Sov i korta intervall under väntan på grafikhårdvaran") \
-                DRI_CONF_ENUM(2,"Låt grafikhårdvaran sända ut ett programvaruavbrott och sov") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_VBLANK_NEVER 0
-#define DRI_CONF_VBLANK_DEF_INTERVAL_0 1
-#define DRI_CONF_VBLANK_DEF_INTERVAL_1 2
-#define DRI_CONF_VBLANK_ALWAYS_SYNC 3
-#define DRI_CONF_VBLANK_MODE(def) \
-DRI_CONF_OPT_BEGIN_V(vblank_mode,enum,def,"0:3") \
-        DRI_CONF_DESC_BEGIN(en,"Synchronization with vertical refresh (swap intervals)") \
-                DRI_CONF_ENUM(0,"Never synchronize with vertical refresh, ignore application's choice") \
-                DRI_CONF_ENUM(1,"Initial swap interval 0, obey application's choice") \
-                DRI_CONF_ENUM(2,"Initial swap interval 1, obey application's choice") \
-                DRI_CONF_ENUM(3,"Always synchronize with vertical refresh, application chooses the minimum swap interval") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(de,"Synchronisation mit der vertikalen Bildwiederholung") \
-                DRI_CONF_ENUM(0,"Niemals mit der Bildwiederholung synchronisieren, Anweisungen der Anwendung ignorieren") \
-                DRI_CONF_ENUM(1,"Initiales Bildinterval 0, Anweisungen der Anwendung gehorchen") \
-                DRI_CONF_ENUM(2,"Initiales Bildinterval 1, Anweisungen der Anwendung gehorchen") \
-                DRI_CONF_ENUM(3,"Immer mit der Bildwiederholung synchronisieren, Anwendung wählt das minimale Bildintervall") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(es,"Sincronización con el refresco vertical (intervalos de intercambio)") \
-                DRI_CONF_ENUM(0,"No sincronizar nunca con el refresco vertical, ignorar la elección de la aplicación") \
-                DRI_CONF_ENUM(1,"Intervalo de intercambio inicial 0, obedecer la elección de la aplicación") \
-                DRI_CONF_ENUM(2,"Intervalo de intercambio inicial 1, obedecer la elección de la aplicación") \
-                DRI_CONF_ENUM(3,"Sincronizar siempre con el refresco vertical, la aplicación elige el intervalo de intercambio mínimo") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(nl,"Synchronisatie met verticale verversing (interval omwisselen)") \
-                DRI_CONF_ENUM(0,"Nooit synchroniseren met verticale verversing, negeer de keuze van de applicatie") \
-                DRI_CONF_ENUM(1,"Initïeel omwisselingsinterval 0, honoreer de keuze van de applicatie") \
-                DRI_CONF_ENUM(2,"Initïeel omwisselingsinterval 1, honoreer de keuze van de applicatie") \
-                DRI_CONF_ENUM(3,"Synchroniseer altijd met verticale verversing, de applicatie kiest het minimum omwisselingsinterval") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(fr,"Synchronisation de l'affichage avec le balayage vertical") \
-                DRI_CONF_ENUM(0,"Ne jamais synchroniser avec le balayage vertical, ignorer le choix de l'application") \
-                DRI_CONF_ENUM(1,"Ne pas synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application") \
-                DRI_CONF_ENUM(2,"Synchroniser avec le balayage vertical par défaut, mais obéir au choix de l'application") \
-                DRI_CONF_ENUM(3,"Toujours synchroniser avec le balayage vertical, l'application choisit l'intervalle minimal") \
-        DRI_CONF_DESC_END \
-        DRI_CONF_DESC_BEGIN(sv,"Synkronisering med vertikal uppdatering (växlingsintervall)") \
-                DRI_CONF_ENUM(0,"Synkronisera aldrig med vertikal uppdatering, ignorera programmets val") \
-                DRI_CONF_ENUM(1,"Initialt växlingsintervall 0, följ programmets val") \
-                DRI_CONF_ENUM(2,"Initialt växlingsintervall 1, följ programmets val") \
-                DRI_CONF_ENUM(3,"Synkronisera alltid med vertikal uppdatering, programmet väljer den minsta växlingsintervallen") \
-        DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_HYPERZ_DISABLED 0
-#define DRI_CONF_HYPERZ_ENABLED 1
-#define DRI_CONF_HYPERZ(def) \
-DRI_CONF_OPT_BEGIN(hyperz,bool,def) \
-        DRI_CONF_DESC(en,"Use HyperZ to boost performance") \
-        DRI_CONF_DESC(de,"HyperZ zur Leistungssteigerung verwenden") \
-        DRI_CONF_DESC(es,"Usar HyperZ para potenciar rendimiento") \
-        DRI_CONF_DESC(nl,"Gebruik HyperZ om de prestaties te verbeteren") \
-        DRI_CONF_DESC(fr,"Utiliser le HyperZ pour améliorer les performances") \
-        DRI_CONF_DESC(sv,"Använd HyperZ för att maximera prestandan") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_CELSHADE(def) \
-DRI_CONF_OPT_BEGIN_V(pp_celshade,enum,def,"0:1") \
-        DRI_CONF_DESC(en,"A post-processing filter to cel-shade the output") \
-        DRI_CONF_DESC(de,"A post-processing filter to cel-shade the output") \
-        DRI_CONF_DESC(es,"A post-processing filter to cel-shade the output") \
-        DRI_CONF_DESC(nl,"A post-processing filter to cel-shade the output") \
-        DRI_CONF_DESC(fr,"A post-processing filter to cel-shade the output") \
-        DRI_CONF_DESC(sv,"A post-processing filter to cel-shade the output") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_NORED(def) \
-DRI_CONF_OPT_BEGIN_V(pp_nored,enum,def,"0:1") \
-        DRI_CONF_DESC(en,"A post-processing filter to remove the red channel") \
-        DRI_CONF_DESC(de,"A post-processing filter to remove the red channel") \
-        DRI_CONF_DESC(es,"A post-processing filter to remove the red channel") \
-        DRI_CONF_DESC(nl,"A post-processing filter to remove the red channel") \
-        DRI_CONF_DESC(fr,"A post-processing filter to remove the red channel") \
-        DRI_CONF_DESC(sv,"A post-processing filter to remove the red channel") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_NOGREEN(def) \
-DRI_CONF_OPT_BEGIN_V(pp_nogreen,enum,def,"0:1") \
-        DRI_CONF_DESC(en,"A post-processing filter to remove the green channel") \
-        DRI_CONF_DESC(de,"A post-processing filter to remove the green channel") \
-        DRI_CONF_DESC(es,"A post-processing filter to remove the green channel") \
-        DRI_CONF_DESC(nl,"A post-processing filter to remove the green channel") \
-        DRI_CONF_DESC(fr,"A post-processing filter to remove the green channel") \
-        DRI_CONF_DESC(sv,"A post-processing filter to remove the green channel") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_NOBLUE(def) \
-DRI_CONF_OPT_BEGIN_V(pp_noblue,enum,def,"0:1") \
-        DRI_CONF_DESC(en,"A post-processing filter to remove the blue channel") \
-        DRI_CONF_DESC(de,"A post-processing filter to remove the blue channel") \
-        DRI_CONF_DESC(es,"A post-processing filter to remove the blue channel") \
-        DRI_CONF_DESC(nl,"A post-processing filter to remove the blue channel") \
-        DRI_CONF_DESC(fr,"A post-processing filter to remove the blue channel") \
-        DRI_CONF_DESC(sv,"A post-processing filter to remove the blue channel") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_JIMENEZMLAA(def,min,max) \
-DRI_CONF_OPT_BEGIN_V(pp_jimenezmlaa,int,def, # min ":" # max ) \
-        DRI_CONF_DESC(en,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-        DRI_CONF_DESC(de,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-        DRI_CONF_DESC(es,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-        DRI_CONF_DESC(nl,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-        DRI_CONF_DESC(fr,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-        DRI_CONF_DESC(sv,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_PP_JIMENEZMLAA_COLOR(def,min,max) \
-DRI_CONF_OPT_BEGIN_V(pp_jimenezmlaa_color,int,def, # min ":" # max ) \
-        DRI_CONF_DESC(en,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-        DRI_CONF_DESC(de,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-        DRI_CONF_DESC(es,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-        DRI_CONF_DESC(nl,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-        DRI_CONF_DESC(fr,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-        DRI_CONF_DESC(sv,"Morphological anti-aliasing based on Jimenez\' MLAA. 0 to disable, 8 for default quality. Color version, usable with 2d GL apps") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_MAX_TEXTURE_UNITS(def,min,max) \
-DRI_CONF_OPT_BEGIN_V(texture_units,int,def, # min ":" # max ) \
-        DRI_CONF_DESC(en,"Number of texture units used") \
-        DRI_CONF_DESC(de,"Anzahl der benutzten Textureinheiten") \
-        DRI_CONF_DESC(es,"Número de unidades de textura usadas") \
-        DRI_CONF_DESC(nl,"Aantal textuureenheden in gebruik") \
-        DRI_CONF_DESC(fr,"Nombre d'unités de texture") \
-        DRI_CONF_DESC(sv,"Antal använda texturenheter") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_ALLOW_LARGE_TEXTURES(def) \
-DRI_CONF_OPT_BEGIN_V(allow_large_textures,enum,def,"0:2") \
-	DRI_CONF_DESC_BEGIN(en,"Support larger textures not guaranteed to fit into graphics memory") \
-		DRI_CONF_ENUM(0,"No") \
-		DRI_CONF_ENUM(1,"At least 1 texture must fit under worst-case assumptions") \
-		DRI_CONF_ENUM(2,"Announce hardware limits") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(de,"Unterstütze grosse Texturen die evtl. nicht in den Grafikspeicher passen") \
-		DRI_CONF_ENUM(0,"Nein") \
-		DRI_CONF_ENUM(1,"Mindestens 1 Textur muss auch im schlechtesten Fall Platz haben") \
-		DRI_CONF_ENUM(2,"Benutze Hardware-Limits") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(es,"Support larger textures not guaranteed to fit into graphics memory") \
-		DRI_CONF_ENUM(0,"No") \
-		DRI_CONF_ENUM(1,"At least 1 texture must fit under worst-case assumptions") \
-		DRI_CONF_ENUM(2,"Announce hardware limits") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(nl,"Support larger textures not guaranteed to fit into graphics memory") \
-		DRI_CONF_ENUM(0,"No") \
-		DRI_CONF_ENUM(1,"At least 1 texture must fit under worst-case assumptions") \
-		DRI_CONF_ENUM(2,"Announce hardware limits") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(fr,"Support larger textures not guaranteed to fit into graphics memory") \
-		DRI_CONF_ENUM(0,"No") \
-		DRI_CONF_ENUM(1,"At least 1 texture must fit under worst-case assumptions") \
-		DRI_CONF_ENUM(2,"Announce hardware limits") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(sv,"Stöd för större texturer är inte garanterat att passa i grafikminnet") \
-		DRI_CONF_ENUM(0,"Nej") \
-		DRI_CONF_ENUM(1,"Åtminstone en textur måste passa för antaget sämsta förhållande") \
-		DRI_CONF_ENUM(2,"Annonsera hårdvarubegränsningar") \
-	DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_TEXTURE_BLEND_QUALITY(def,range) \
-DRI_CONF_OPT_BEGIN_V(texture_blend_quality,float,def,range) \
-	DRI_CONF_DESC(en,"Texture filtering quality vs. speed, AKA “brilinear” texture filtering") \
-	DRI_CONF_DESC(de,"Texturfilterqualität versus -geschwindigkeit, auch bekannt als „brilineare“ Texturfilterung") \
-	DRI_CONF_DESC(es,"Calidad de filtrado de textura vs. velocidad, alias filtrado ”brilinear“ de textura") \
-	DRI_CONF_DESC(nl,"Textuurfilterkwaliteit versus -snelheid, ookwel bekend als “brilineaire” textuurfiltering") \
-	DRI_CONF_DESC(fr,"Qualité/performance du filtrage trilinéaire de texture (filtrage brilinéaire)") \
-	DRI_CONF_DESC(sv,"Texturfiltreringskvalitet mot hastighet, även kallad ”brilinear”-texturfiltrering") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_TEXTURE_HEAPS_ALL 0
-#define DRI_CONF_TEXTURE_HEAPS_CARD 1
-#define DRI_CONF_TEXTURE_HEAPS_GART 2
-#define DRI_CONF_TEXTURE_HEAPS(def) \
-DRI_CONF_OPT_BEGIN_V(texture_heaps,enum,def,"0:2") \
-	DRI_CONF_DESC_BEGIN(en,"Used types of texture memory") \
-		DRI_CONF_ENUM(0,"All available memory") \
-		DRI_CONF_ENUM(1,"Only card memory (if available)") \
-		DRI_CONF_ENUM(2,"Only GART (AGP/PCIE) memory (if available)") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(de,"Benutzte Arten von Texturspeicher") \
-		DRI_CONF_ENUM(0,"Aller verfügbarer Speicher") \
-		DRI_CONF_ENUM(1,"Nur Grafikspeicher (falls verfügbar)") \
-		DRI_CONF_ENUM(2,"Nur GART-Speicher (AGP/PCIE) (falls verfügbar)") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(es,"Tipos de memoria de textura usados") \
-		DRI_CONF_ENUM(0,"Toda la memoria disponible") \
-		DRI_CONF_ENUM(1,"Sólo la memoria de la tarjeta (si disponible)") \
-		DRI_CONF_ENUM(2,"Sólo memoria GART (AGP/PCIE) (si disponible)") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(nl,"Gebruikte soorten textuurgeheugen") \
-		DRI_CONF_ENUM(0,"Al het beschikbaar geheugen") \
-		DRI_CONF_ENUM(1,"Alleen geheugen op de kaart (als het aanwezig is)") \
-		DRI_CONF_ENUM(2,"Alleen GART (AGP/PCIE) geheugen (als het aanwezig is)") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(fr,"Types de mémoire de texture") \
-		DRI_CONF_ENUM(0,"Utiliser toute la mémoire disponible") \
-		DRI_CONF_ENUM(1,"Utiliser uniquement la mémoire graphique (si disponible)") \
-		DRI_CONF_ENUM(2,"Utiliser uniquement la mémoire GART (AGP/PCIE) (si disponible)") \
-	DRI_CONF_DESC_END \
-	DRI_CONF_DESC_BEGIN(sv,"Använda typer av texturminne") \
-		DRI_CONF_ENUM(0,"Allt tillgängligt minne") \
-		DRI_CONF_ENUM(1,"Endast kortminne (om tillgängligt)") \
-		DRI_CONF_ENUM(2,"Endast GART-minne (AGP/PCIE) (om tillgängligt)") \
-	DRI_CONF_DESC_END \
-DRI_CONF_OPT_END
-
-/* Options for features that are not done in hardware by the driver (like GL_ARB_vertex_program
-   On cards where there is no documentation (r200) or on rasterization-only hardware). */
-#define DRI_CONF_SECTION_SOFTWARE \
-DRI_CONF_SECTION_BEGIN \
-        DRI_CONF_DESC(en,"Features that are not hardware-accelerated") \
-        DRI_CONF_DESC(de,"Funktionalität, die nicht hardwarebeschleunigt ist") \
-        DRI_CONF_DESC(es,"Características no aceleradas por hardware") \
-        DRI_CONF_DESC(nl,"Eigenschappen die niet hardwareversneld zijn") \
-        DRI_CONF_DESC(fr,"Fonctionnalités ne bénéficiant pas d'une accélération matérielle") \
-        DRI_CONF_DESC(sv,"Funktioner som inte är hårdvaruaccelererade")
-
-#define DRI_CONF_ARB_VERTEX_PROGRAM(def) \
-DRI_CONF_OPT_BEGIN(arb_vertex_program,bool,def) \
-        DRI_CONF_DESC(en,"Enable extension GL_ARB_vertex_program") \
-        DRI_CONF_DESC(de,"Erweiterung GL_ARB_vertex_program aktivieren") \
-        DRI_CONF_DESC(es,"Activar la extensión GL_ARB_vertex_program") \
-        DRI_CONF_DESC(nl,"Zet uitbreiding GL_ARB_vertex_program aan") \
-        DRI_CONF_DESC(fr,"Activer l'extension GL_ARB_vertex_program") \
-        DRI_CONF_DESC(sv,"Aktivera tillägget GL_ARB_vertex_program") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_ALWAYS_FLUSH_BATCH(def) \
-DRI_CONF_OPT_BEGIN(always_flush_batch,bool,def) \
-        DRI_CONF_DESC(en,"Enable flushing batchbuffer after each draw call") \
-        DRI_CONF_DESC(de,"Enable flushing batchbuffer after each draw call") \
-        DRI_CONF_DESC(es,"Enable flushing batchbuffer after each draw call") \
-        DRI_CONF_DESC(nl,"Enable flushing batchbuffer after each draw call") \
-        DRI_CONF_DESC(fr,"Enable flushing batchbuffer after each draw call") \
-        DRI_CONF_DESC(sv,"Enable flushing batchbuffer after each draw call") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_ALWAYS_FLUSH_CACHE(def) \
-DRI_CONF_OPT_BEGIN(always_flush_cache,bool,def) \
-        DRI_CONF_DESC(en,"Enable flushing GPU caches with each draw call") \
-        DRI_CONF_DESC(de,"Enable flushing GPU caches with each draw call") \
-        DRI_CONF_DESC(es,"Enable flushing GPU caches with each draw call") \
-        DRI_CONF_DESC(nl,"Enable flushing GPU caches with each draw call") \
-        DRI_CONF_DESC(fr,"Enable flushing GPU caches with each draw call") \
-        DRI_CONF_DESC(sv,"Enable flushing GPU caches with each draw call") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_FORCE_GLSL_EXTENSIONS_WARN(def) \
-DRI_CONF_OPT_BEGIN(force_glsl_extensions_warn,bool,def) \
-        DRI_CONF_DESC(en,"Force GLSL extension default behavior to 'warn'") \
-        DRI_CONF_DESC(de,"Force GLSL extension default behavior to 'warn'") \
-        DRI_CONF_DESC(es,"Force GLSL extension default behavior to 'warn'") \
-        DRI_CONF_DESC(nl,"Force GLSL extension default behavior to 'warn'") \
-        DRI_CONF_DESC(fr,"Force GLSL extension default behavior to 'warn'") \
-        DRI_CONF_DESC(sv,"Force GLSL extension default behavior to 'warn'") \
-DRI_CONF_OPT_END
-
-#define DRI_CONF_DISABLE_BLEND_FUNC_EXTENDED(def) \
-DRI_CONF_OPT_BEGIN(disable_blend_func_extended,bool,def) \
-        DRI_CONF_DESC(en,"Disable dual source blending") \
-        DRI_CONF_DESC(de,"Disable dual source blending") \
-        DRI_CONF_DESC(es,"Disable dual source blending") \
-        DRI_CONF_DESC(nl,"Disable dual source blending") \
-        DRI_CONF_DESC(fr,"Disable dual source blending") \
-        DRI_CONF_DESC(sv,"Disable dual source blending") \
-DRI_CONF_OPT_END
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/t_options.h b/mesalib/src/mesa/drivers/dri/common/xmlpool/t_options.h
index e2d4aaee3..683a47366 100644
--- a/mesalib/src/mesa/drivers/dri/common/xmlpool/t_options.h
+++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/t_options.h
@@ -272,3 +272,18 @@ DRI_CONF_OPT_END
 DRI_CONF_OPT_BEGIN(always_flush_cache,bool,def) \
         DRI_CONF_DESC(en,gettext("Enable flushing GPU caches with each draw call")) \
 DRI_CONF_OPT_END
+
+#define DRI_CONF_FORCE_GLSL_EXTENSIONS_WARN(def) \
+DRI_CONF_OPT_BEGIN(force_glsl_extensions_warn,bool,def) \
+        DRI_CONF_DESC(en,gettext("Force GLSL extension default behavior to 'warn'")) \
+DRI_CONF_OPT_END
+
+#define DRI_CONF_DISABLE_BLEND_FUNC_EXTENDED(def) \
+DRI_CONF_OPT_BEGIN(disable_blend_func_extended,bool,def) \
+        DRI_CONF_DESC(en,gettext("Disable dual source blending")) \
+DRI_CONF_OPT_END
+
+#define DRI_CONF_DISABLE_GLSL_LINE_CONTINUATIONS(def) \
+DRI_CONF_OPT_BEGIN(disable_glsl_line_continuations,bool,def) \
+        DRI_CONF_DESC(en,gettext("Disable backslash-based line continuations in GLSL source")) \
+DRI_CONF_OPT_END
diff --git a/mesalib/src/mesa/drivers/dri/swrast/Makefile.am b/mesalib/src/mesa/drivers/dri/swrast/Makefile.am
index 244aa8b27..3e539073c 100644
--- a/mesalib/src/mesa/drivers/dri/swrast/Makefile.am
+++ b/mesalib/src/mesa/drivers/dri/swrast/Makefile.am
@@ -23,9 +23,6 @@
 
 include Makefile.sources
 
-# Hack to make some of the non-automake variables work.
-TOP=$(top_builddir)
-
 AM_CFLAGS = \
 	-D__NOT_HAVE_DRM_H \
 	-I$(top_srcdir)/include \
diff --git a/mesalib/src/mesa/main/api_arrayelt.c b/mesalib/src/mesa/main/api_arrayelt.c
index 0fa242997..ea3361488 100644
--- a/mesalib/src/mesa/main/api_arrayelt.c
+++ b/mesalib/src/mesa/main/api_arrayelt.c
@@ -1636,7 +1636,7 @@ void GLAPIENTRY _ae_ArrayElement( GLint elt )
    /* If PrimitiveRestart is enabled and the index is the RestartIndex
     * then we call PrimitiveRestartNV and return.
     */
-   if (ctx->Array.PrimitiveRestart && (elt == ctx->Array.RestartIndex)) {
+   if (ctx->Array._PrimitiveRestart && (elt == ctx->Array._RestartIndex)) {
       CALL_PrimitiveRestartNV((struct _glapi_table *)disp, ());
       return;
    }
diff --git a/mesalib/src/mesa/main/attrib.c b/mesalib/src/mesa/main/attrib.c
index a19d61054..d6f298d93 100644
--- a/mesalib/src/mesa/main/attrib.c
+++ b/mesalib/src/mesa/main/attrib.c
@@ -1377,7 +1377,10 @@ copy_array_attrib(struct gl_context *ctx,
    dest->LockFirst = src->LockFirst;
    dest->LockCount = src->LockCount;
    dest->PrimitiveRestart = src->PrimitiveRestart;
+   dest->PrimitiveRestartFixedIndex = src->PrimitiveRestartFixedIndex;
+   dest->_PrimitiveRestart = src->_PrimitiveRestart;
    dest->RestartIndex = src->RestartIndex;
+   dest->_RestartIndex = src->_RestartIndex;
    /* skip NewState */
    /* skip RebindArrays */
 
diff --git a/mesalib/src/mesa/main/enable.c b/mesalib/src/mesa/main/enable.c
index b48794f95..73257290e 100644
--- a/mesalib/src/mesa/main/enable.c
+++ b/mesalib/src/mesa/main/enable.c
@@ -48,6 +48,20 @@
    }
 
 
+static void
+update_derived_primitive_restart_state(struct gl_context *ctx)
+{
+   /* Update derived primitive restart state.
+    */
+   if (ctx->Array.PrimitiveRestart)
+      ctx->Array._RestartIndex = ctx->Array.RestartIndex;
+   else
+      ctx->Array._RestartIndex = ~0;
+
+   ctx->Array._PrimitiveRestart = ctx->Array.PrimitiveRestart
+      || ctx->Array.PrimitiveRestartFixedIndex;
+}
+
 /**
  * Helper to enable/disable client-side state.
  */
@@ -119,6 +133,8 @@ client_state(struct gl_context *ctx, GLenum cap, GLboolean state)
 
    *var = state;
 
+   update_derived_primitive_restart_state(ctx);
+
    if (state)
       arrayObj->_Enabled |= flag;
    else
@@ -967,6 +983,17 @@ _mesa_set_enable(struct gl_context *ctx, GLenum cap, GLboolean state)
          if (ctx->Array.PrimitiveRestart != state) {
             FLUSH_VERTICES(ctx, _NEW_TRANSFORM);
             ctx->Array.PrimitiveRestart = state;
+            update_derived_primitive_restart_state(ctx);
+         }
+         break;
+
+      case GL_PRIMITIVE_RESTART_FIXED_INDEX:
+	 if (!_mesa_is_gles3(ctx) && !ctx->Extensions.ARB_ES3_compatibility)
+            goto invalid_enum_error;
+         if (ctx->Array.PrimitiveRestartFixedIndex != state) {
+            FLUSH_VERTICES(ctx, _NEW_TRANSFORM);
+            ctx->Array.PrimitiveRestartFixedIndex = state;
+            update_derived_primitive_restart_state(ctx);
          }
          break;
 
@@ -1542,6 +1569,12 @@ _mesa_IsEnabled( GLenum cap )
          }
          return ctx->Array.PrimitiveRestart;
 
+      case GL_PRIMITIVE_RESTART_FIXED_INDEX:
+	 if (!_mesa_is_gles3(ctx) && !ctx->Extensions.ARB_ES3_compatibility) {
+            goto invalid_enum_error;
+         }
+         return ctx->Array.PrimitiveRestartFixedIndex;
+
       /* GL3.0 - GL_framebuffer_sRGB */
       case GL_FRAMEBUFFER_SRGB_EXT:
          if (!_mesa_is_desktop_gl(ctx))
diff --git a/mesalib/src/mesa/main/extensions.c b/mesalib/src/mesa/main/extensions.c
index 3486b65a4..c3c73fc26 100644
--- a/mesalib/src/mesa/main/extensions.c
+++ b/mesalib/src/mesa/main/extensions.c
@@ -100,6 +100,7 @@ static const struct extension extension_table[] = {
    { "GL_ARB_fragment_shader",                     o(ARB_fragment_shader),                     GL,             2002 },
    { "GL_ARB_framebuffer_object",                  o(ARB_framebuffer_object),                  GL,             2005 },
    { "GL_ARB_framebuffer_sRGB",                    o(EXT_framebuffer_sRGB),                    GL,             1998 },
+   { "GL_ARB_get_program_binary",                  o(ARB_shader_objects),                      GL,             2010 },
    { "GL_ARB_half_float_pixel",                    o(ARB_half_float_pixel),                    GL,             2003 },
    { "GL_ARB_half_float_vertex",                   o(ARB_half_float_vertex),                   GL,             2008 },
    { "GL_ARB_instanced_arrays",                    o(ARB_instanced_arrays),                    GL,             2008 },
@@ -249,6 +250,7 @@ static const struct extension extension_table[] = {
    { "GL_OES_fbo_render_mipmap",                   o(EXT_framebuffer_object),                       ES1 | ES2, 2005 },
    { "GL_OES_fixed_point",                         o(dummy_true),                                   ES1,       2002 },
    { "GL_OES_framebuffer_object",                  o(EXT_framebuffer_object),                       ES1,       2005 },
+   { "GL_OES_get_program_binary",                  o(ARB_shader_objects),                                 ES2, 2008 },
    { "GL_OES_mapbuffer",                           o(dummy_true),                                   ES1 | ES2, 2005 },
    { "GL_OES_matrix_get",                          o(dummy_true),                                   ES1,       2004 },
    { "GL_OES_packed_depth_stencil",                o(EXT_packed_depth_stencil),                     ES1 | ES2, 2007 },
diff --git a/mesalib/src/mesa/main/format_unpack.c b/mesalib/src/mesa/main/format_unpack.c
index d34a27b82..92ce86908 100644
--- a/mesalib/src/mesa/main/format_unpack.c
+++ b/mesalib/src/mesa/main/format_unpack.c
@@ -2696,6 +2696,20 @@ unpack_int_rgba_ABGR2101010_UINT(const GLuint *src, GLuint dst[][4], GLuint n)
    }
 }
 
+static void
+unpack_int_rgba_ARGB2101010(const GLuint *src, GLuint dst[][4], GLuint n)
+{
+   unsigned int i;
+
+   for (i = 0; i < n; i++) {
+      GLuint tmp = src[i];
+      dst[i][0] = (tmp >> 20) & 0x3ff;
+      dst[i][1] = (tmp >> 10) & 0x3ff;
+      dst[i][2] = (tmp >> 0) & 0x3ff;
+      dst[i][3] = (tmp >> 30) & 0x3;
+   }
+}
+
 void
 _mesa_unpack_uint_rgba_row(gl_format format, GLuint n,
                            const void *src, GLuint dst[][4])
@@ -2871,6 +2885,10 @@ _mesa_unpack_uint_rgba_row(gl_format format, GLuint n,
       unpack_int_rgba_ABGR2101010_UINT(src, dst, n);
       break;
 
+   case MESA_FORMAT_ARGB2101010:
+      unpack_int_rgba_ARGB2101010(src, dst, n);
+      break;
+
    default:
       _mesa_problem(NULL, "%s: bad format %s", __FUNCTION__,
                     _mesa_get_format_name(format));
diff --git a/mesalib/src/mesa/main/get_hash_params.py b/mesalib/src/mesa/main/get_hash_params.py
index 3db820a77..26a722a87 100644
--- a/mesalib/src/mesa/main/get_hash_params.py
+++ b/mesalib/src/mesa/main/get_hash_params.py
@@ -310,6 +310,12 @@ descriptor=[
   [ "MAX_VARYING_VECTORS", "CONTEXT_INT(Const.MaxVarying), extra_ARB_ES2_compatibility_api_es2" ],
   [ "MAX_VERTEX_UNIFORM_VECTORS", "LOC_CUSTOM, TYPE_INT, 0, extra_ARB_ES2_compatibility_api_es2" ],
   [ "MAX_FRAGMENT_UNIFORM_VECTORS", "LOC_CUSTOM, TYPE_INT, 0, extra_ARB_ES2_compatibility_api_es2" ],
+  [ "NUM_SHADER_BINARY_FORMATS", "CONST(0), extra_ARB_ES2_compatibility_api_es2" ],
+  [ "SHADER_BINARY_FORMATS", "CONST(0), extra_ARB_ES2_compatibility_api_es2" ],
+
+# GL_ARB_get_program_binary / GL_OES_get_program_binary
+  [ "NUM_PROGRAM_BINARY_FORMATS", "CONST(0), extra_ARB_shader_objects" ],
+  [ "PROGRAM_BINARY_FORMATS", "LOC_CUSTOM, TYPE_INVALID, 0, extra_ARB_shader_objects" ],
 ]},
 
 # GLES3 is not a typo.
@@ -379,14 +385,6 @@ descriptor=[
   [ "TEXTURE_EXTERNAL_OES", "LOC_CUSTOM, TYPE_BOOLEAN, 0, extra_OES_EGL_image_external" ],
 ]},
 
-# Enums unique to OpenGL ES 2.0
-{ "apis": ["GLES2"], "params": [
-# OES_get_program_binary
-  [ "NUM_SHADER_BINARY_FORMATS", "CONST(0), NO_EXTRA" ],
-  [ "SHADER_BINARY_FORMATS", "CONST(0), NO_EXTRA" ],
-]},
-
-
 # Remaining enums are only in OpenGL
 { "apis": ["GL", "GL_CORE"], "params": [
   [ "ACCUM_RED_BITS", "BUFFER_INT(Visual.accumRedBits), NO_EXTRA" ],
diff --git a/mesalib/src/mesa/main/glformats.c b/mesalib/src/mesa/main/glformats.c
index f33a0503d..ff56ffad0 100644
--- a/mesalib/src/mesa/main/glformats.c
+++ b/mesalib/src/mesa/main/glformats.c
@@ -271,7 +271,8 @@ _mesa_bytes_per_pixel(GLenum format, GLenum type)
    case GL_UNSIGNED_INT_10_10_10_2:
    case GL_UNSIGNED_INT_2_10_10_10_REV:
       if (format == GL_RGBA || format == GL_BGRA || format == GL_ABGR_EXT ||
-          format == GL_RGBA_INTEGER_EXT || format == GL_BGRA_INTEGER_EXT)
+          format == GL_RGBA_INTEGER_EXT || format == GL_BGRA_INTEGER_EXT ||
+          format == GL_RGB)
          return sizeof(GLuint);
       else
          return -1;
@@ -353,21 +354,9 @@ _mesa_bytes_per_vertex_attrib(GLint comps, GLenum type)
  * Test if the given format is an integer (non-normalized) format.
  */
 GLboolean
-_mesa_is_enum_format_integer(GLenum format)
+_mesa_is_enum_format_unsigned_int(GLenum format)
 {
    switch (format) {
-   /* generic integer formats */
-   case GL_RED_INTEGER_EXT:
-   case GL_GREEN_INTEGER_EXT:
-   case GL_BLUE_INTEGER_EXT:
-   case GL_ALPHA_INTEGER_EXT:
-   case GL_RGB_INTEGER_EXT:
-   case GL_RGBA_INTEGER_EXT:
-   case GL_BGR_INTEGER_EXT:
-   case GL_BGRA_INTEGER_EXT:
-   case GL_LUMINANCE_INTEGER_EXT:
-   case GL_LUMINANCE_ALPHA_INTEGER_EXT:
-   case GL_RG_INTEGER:
    /* specific integer formats */
    case GL_RGBA32UI_EXT:
    case GL_RGB32UI_EXT:
@@ -393,6 +382,34 @@ _mesa_is_enum_format_integer(GLenum format)
    case GL_INTENSITY8UI_EXT:
    case GL_LUMINANCE8UI_EXT:
    case GL_LUMINANCE_ALPHA8UI_EXT:
+   case GL_RGB10_A2UI:
+      return GL_TRUE;
+   default:
+      return GL_FALSE;
+   }
+}
+
+
+/**
+ * Test if the given format is an integer (non-normalized) format.
+ */
+GLboolean
+_mesa_is_enum_format_signed_int(GLenum format)
+{
+   switch (format) {
+   /* generic integer formats */
+   case GL_RED_INTEGER_EXT:
+   case GL_GREEN_INTEGER_EXT:
+   case GL_BLUE_INTEGER_EXT:
+   case GL_ALPHA_INTEGER_EXT:
+   case GL_RGB_INTEGER_EXT:
+   case GL_RGBA_INTEGER_EXT:
+   case GL_BGR_INTEGER_EXT:
+   case GL_BGRA_INTEGER_EXT:
+   case GL_LUMINANCE_INTEGER_EXT:
+   case GL_LUMINANCE_ALPHA_INTEGER_EXT:
+   case GL_RG_INTEGER:
+   /* specific integer formats */
    case GL_RGBA32I_EXT:
    case GL_RGB32I_EXT:
    case GL_RG32I:
@@ -417,7 +434,6 @@ _mesa_is_enum_format_integer(GLenum format)
    case GL_INTENSITY8I_EXT:
    case GL_LUMINANCE8I_EXT:
    case GL_LUMINANCE_ALPHA8I_EXT:
-   case GL_RGB10_A2UI:
       return GL_TRUE;
    default:
       return GL_FALSE;
@@ -426,6 +442,17 @@ _mesa_is_enum_format_integer(GLenum format)
 
 
 /**
+ * Test if the given format is an integer (non-normalized) format.
+ */
+GLboolean
+_mesa_is_enum_format_integer(GLenum format)
+{
+   return _mesa_is_enum_format_unsigned_int(format) ||
+          _mesa_is_enum_format_signed_int(format);
+}
+
+
+/**
  * Test if the given type is an integer (non-normalized) format.
  */
 GLboolean
@@ -1032,6 +1059,32 @@ _mesa_base_format_has_channel(GLenum base_format, GLenum pname)
 
 
 /**
+ * Returns the number of channels/components for a base format.
+ */
+GLint
+_mesa_base_format_component_count(GLenum base_format)
+{
+   switch (base_format) {
+   case GL_RED:
+   case GL_ALPHA:
+   case GL_INTENSITY:
+   case GL_DEPTH_COMPONENT:
+      return 1;
+   case GL_RG:
+   case GL_LUMINANCE_ALPHA:
+   case GL_DEPTH_STENCIL:
+      return 2;
+   case GL_RGB:
+      return 3;
+   case GL_RGBA:
+      return 4;
+   default:
+      return -1;
+   }
+}
+
+
+/**
  * If format is a generic compressed format, return the corresponding
  * non-compressed format.  For other formats, return the format as-is.
  */
diff --git a/mesalib/src/mesa/main/glformats.h b/mesalib/src/mesa/main/glformats.h
index ccfb5e13c..fe604ddc9 100644
--- a/mesalib/src/mesa/main/glformats.h
+++ b/mesalib/src/mesa/main/glformats.h
@@ -62,6 +62,12 @@ extern GLboolean
 _mesa_is_enum_format_integer(GLenum format);
 
 extern GLboolean
+_mesa_is_enum_format_unsigned_int(GLenum format);
+
+extern GLboolean
+_mesa_is_enum_format_signed_int(GLenum format);
+
+extern GLboolean
 _mesa_is_enum_format_or_type_integer(GLenum format, GLenum type);
 
 extern GLboolean
@@ -94,6 +100,9 @@ _mesa_base_format_to_integer_format(GLenum format);
 extern GLboolean
 _mesa_base_format_has_channel(GLenum base_format, GLenum pname);
 
+extern GLint
+_mesa_base_format_component_count(GLenum base_format);
+
 extern GLenum
 _mesa_generic_compressed_format_to_uncompressed_format(GLenum format);
 
diff --git a/mesalib/src/mesa/main/mtypes.h b/mesalib/src/mesa/main/mtypes.h
index 318dcb548..8904b13d9 100644
--- a/mesalib/src/mesa/main/mtypes.h
+++ b/mesalib/src/mesa/main/mtypes.h
@@ -1634,9 +1634,20 @@ struct gl_array_attrib
    GLuint LockFirst;            /**< GL_EXT_compiled_vertex_array */
    GLuint LockCount;            /**< GL_EXT_compiled_vertex_array */
 
-   /** GL 3.1 (slightly different from GL_NV_primitive_restart) */
+   /**
+    * \name Primitive restart controls
+    *
+    * Primitive restart is enabled if either \c PrimitiveRestart or
+    * \c PrimitiveRestart is set.  If \c PrimitiveRestart is set, then
+    * \c RestartIndex is used as the cut vertex.  Otherwise ~0 is used.
+    */
+   /*@{*/
    GLboolean PrimitiveRestart;
+   GLboolean PrimitiveRestartFixedIndex;
+   GLboolean _PrimitiveRestart;
    GLuint RestartIndex;
+   GLuint _RestartIndex;
+   /*@}*/
 
    /* GL_ARB_vertex_buffer_object */
    struct gl_buffer_object *ArrayBufferObj;
@@ -2303,6 +2314,11 @@ struct gl_shader_program
    GLboolean DeletePending;
 
    /**
+    * Is the application intending to glGetProgramBinary this program?
+    */
+   GLboolean BinaryRetreivableHint;
+
+   /**
     * Flags that the linker should not reject the program if it lacks
     * a vertex or fragment shader.  GLES2 doesn't allow separate
     * shader objects, and would reject them.  However, we internally
@@ -2973,6 +2989,12 @@ struct gl_constants
     * \sa _mesa_init_constants
     */
    GLuint64 MaxElementIndex;
+
+   /**
+    * Disable interpretation of line continuations (lines ending with a
+    * backslash character ('\') in GLSL source.
+    */
+   GLboolean DisableGLSLLineContinuations;
 };
 
 
diff --git a/mesalib/src/mesa/main/queryobj.c b/mesalib/src/mesa/main/queryobj.c
index cfb20cd4c..054dfbad7 100644
--- a/mesalib/src/mesa/main/queryobj.c
+++ b/mesalib/src/mesa/main/queryobj.c
@@ -147,6 +147,12 @@ get_query_binding_point(struct gl_context *ctx, GLenum target)
          return &ctx->Query.CurrentOcclusionObject;
       else
          return NULL;
+   case GL_ANY_SAMPLES_PASSED_CONSERVATIVE:
+      if (ctx->Extensions.ARB_ES3_compatibility
+          || (ctx->API == API_OPENGLES2 && ctx->Version >= 30))
+         return &ctx->Query.CurrentOcclusionObject;
+      else
+         return NULL;
    case GL_TIME_ELAPSED_EXT:
       if (ctx->Extensions.EXT_timer_query)
          return &ctx->Query.CurrentTimerObject;
@@ -577,7 +583,8 @@ _mesa_GetQueryObjectiv(GLuint id, GLenum pname, GLint *params)
          if (!q->Ready)
             ctx->Driver.WaitQuery(ctx, q);
          /* if result is too large for returned type, clamp to max value */
-         if (q->Target == GL_ANY_SAMPLES_PASSED) {
+         if (q->Target == GL_ANY_SAMPLES_PASSED
+             || q->Target == GL_ANY_SAMPLES_PASSED_CONSERVATIVE) {
             if (q->Result)
                *params = GL_TRUE;
             else
@@ -628,7 +635,8 @@ _mesa_GetQueryObjectuiv(GLuint id, GLenum pname, GLuint *params)
          if (!q->Ready)
             ctx->Driver.WaitQuery(ctx, q);
          /* if result is too large for returned type, clamp to max value */
-         if (q->Target == GL_ANY_SAMPLES_PASSED) {
+         if (q->Target == GL_ANY_SAMPLES_PASSED
+             || q->Target == GL_ANY_SAMPLES_PASSED_CONSERVATIVE) {
             if (q->Result)
                *params = GL_TRUE;
             else
diff --git a/mesalib/src/mesa/main/shaderapi.c b/mesalib/src/mesa/main/shaderapi.c
index 1f0002f6f..7f5fce796 100644
--- a/mesalib/src/mesa/main/shaderapi.c
+++ b/mesalib/src/mesa/main/shaderapi.c
@@ -583,6 +583,21 @@ get_programiv(struct gl_context *ctx, GLuint program, GLenum pname, GLint *param
 
       *params = shProg->NumUniformBlocks;
       return;
+   case GL_PROGRAM_BINARY_RETRIEVABLE_HINT:
+      /* This enum isn't part of the OES extension for OpenGL ES 2.0.  It is
+       * only available with desktop OpenGL 3.0+ with the
+       * GL_ARB_get_program_binary extension or OpenGL ES 3.0.
+       *
+       * On desktop, we ignore the 3.0+ requirement because it is silly.
+       */
+      if (!_mesa_is_desktop_gl(ctx) && !_mesa_is_gles3(ctx))
+         break;
+
+      *params = shProg->BinaryRetreivableHint;
+      return;
+   case GL_PROGRAM_BINARY_LENGTH:
+      *params = 0;
+      return;
    default:
       break;
    }
@@ -1500,9 +1515,64 @@ _mesa_ShaderBinary(GLint n, const GLuint* shaders, GLenum binaryformat,
 
 #endif /* FEATURE_ES2 */
 
+void GLAPIENTRY
+_mesa_GetProgramBinary(GLuint program, GLsizei bufSize, GLsizei *length,
+                       GLenum *binaryFormat, GLvoid *binary)
+{
+   struct gl_shader_program *shProg;
+   GET_CURRENT_CONTEXT(ctx);
+
+   ASSERT_OUTSIDE_BEGIN_END(ctx);
+
+   shProg = _mesa_lookup_shader_program_err(ctx, program, "glGetProgramBinary");
+   if (!shProg)
+      return;
+
+   if (!shProg->LinkStatus) {
+      _mesa_error(ctx, GL_INVALID_OPERATION,
+                  "glGetProgramBinary(program %u not linked)",
+                  shProg->Name);
+      return;
+   }
+
+   if (bufSize < 0){
+      _mesa_error(ctx, GL_INVALID_VALUE, "glGetProgramBinary(bufSize < 0)");
+      return;
+   }
+
+   /* The ARB_get_program_binary spec says:
+    *
+    *     "If <length> is NULL, then no length is returned."
+    */
+   if (length != NULL)
+      *length = 0;
+
+   (void) binaryFormat;
+   (void) binary;
+}
 
 void GLAPIENTRY
-_mesa_ProgramParameteriARB(GLuint program, GLenum pname, GLint value)
+_mesa_ProgramBinary(GLuint program, GLenum binaryFormat,
+                    const GLvoid *binary, GLsizei length)
+{
+   struct gl_shader_program *shProg;
+   GET_CURRENT_CONTEXT(ctx);
+
+   ASSERT_OUTSIDE_BEGIN_END(ctx);
+
+   shProg = _mesa_lookup_shader_program_err(ctx, program, "glProgramBinary");
+   if (!shProg)
+      return;
+
+   (void) binaryFormat;
+   (void) binary;
+   (void) length;
+   _mesa_error(ctx, GL_INVALID_OPERATION, __FUNCTION__);
+}
+
+
+void GLAPIENTRY
+_mesa_ProgramParameteri(GLuint program, GLenum pname, GLint value)
 {
    struct gl_shader_program *shProg;
    GET_CURRENT_CONTEXT(ctx);
@@ -1516,6 +1586,9 @@ _mesa_ProgramParameteriARB(GLuint program, GLenum pname, GLint value)
 
    switch (pname) {
    case GL_GEOMETRY_VERTICES_OUT_ARB:
+      if (!_mesa_is_desktop_gl(ctx) || !ctx->Extensions.ARB_geometry_shader4)
+         break;
+
       if (value < 1 ||
           (unsigned) value > ctx->Const.MaxGeometryOutputVertices) {
          _mesa_error(ctx, GL_INVALID_VALUE,
@@ -1524,8 +1597,11 @@ _mesa_ProgramParameteriARB(GLuint program, GLenum pname, GLint value)
          return;
       }
       shProg->Geom.VerticesOut = value;
-      break;
+      return;
    case GL_GEOMETRY_INPUT_TYPE_ARB:
+      if (!_mesa_is_desktop_gl(ctx) || !ctx->Extensions.ARB_geometry_shader4)
+         break;
+
       switch (value) {
       case GL_POINTS:
       case GL_LINES:
@@ -1540,8 +1616,11 @@ _mesa_ProgramParameteriARB(GLuint program, GLenum pname, GLint value)
                      _mesa_lookup_enum_by_nr(value));
          return;
       }
-      break;
+      return;
    case GL_GEOMETRY_OUTPUT_TYPE_ARB:
+      if (!_mesa_is_desktop_gl(ctx) || !ctx->Extensions.ARB_geometry_shader4)
+         break;
+
       switch (value) {
       case GL_POINTS:
       case GL_LINE_STRIP:
@@ -1554,12 +1633,58 @@ _mesa_ProgramParameteriARB(GLuint program, GLenum pname, GLint value)
                      _mesa_lookup_enum_by_nr(value));
          return;
       }
-      break;
+      return;
+   case GL_PROGRAM_BINARY_RETRIEVABLE_HINT:
+      /* This enum isn't part of the OES extension for OpenGL ES 2.0, but it
+       * is part of OpenGL ES 3.0.  For the ES2 case, this function shouldn't
+       * even be in the dispatch table, so we shouldn't need to expclicitly
+       * check here.
+       *
+       * On desktop, we ignore the 3.0+ requirement because it is silly.
+       */
+
+      /* The ARB_get_program_binary extension spec says:
+       *
+       *     "An INVALID_VALUE error is generated if the <value> argument to
+       *     ProgramParameteri is not TRUE or FALSE."
+       */
+      if (value != GL_TRUE && value != GL_FALSE) {
+         _mesa_error(ctx, GL_INVALID_VALUE,
+                     "glProgramParameteri(pname=%s, value=%d): "
+                     "value must be 0 or 1.",
+                     _mesa_lookup_enum_by_nr(pname),
+                     value);
+         return;
+      }
+
+      /* No need to notify the driver.  Any changes will actually take effect
+       * the next time the shader is linked.
+       *
+       * The ARB_get_program_binary extension spec says:
+       *
+       *     "To indicate that a program binary is likely to be retrieved,
+       *     ProgramParameteri should be called with <pname>
+       *     PROGRAM_BINARY_RETRIEVABLE_HINT and <value> TRUE. This setting
+       *     will not be in effect until the next time LinkProgram or
+       *     ProgramBinary has been called successfully."
+       *
+       * The resloution of issue 9 in the extension spec also says:
+       *
+       *     "The application may use the PROGRAM_BINARY_RETRIEVABLE_HINT hint
+       *     to indicate to the GL implementation that this program will
+       *     likely be saved with GetProgramBinary at some point. This will
+       *     give the GL implementation the opportunity to track any state
+       *     changes made to the program before being saved such that when it
+       *     is loaded again a recompile can be avoided."
+       */
+      shProg->BinaryRetreivableHint = value;
+      return;
    default:
-      _mesa_error(ctx, GL_INVALID_ENUM, "glProgramParameteriARB(pname=%s)",
-                  _mesa_lookup_enum_by_nr(pname));
       break;
    }
+
+   _mesa_error(ctx, GL_INVALID_ENUM, "glProgramParameteri(pname=%s)",
+               _mesa_lookup_enum_by_nr(pname));
 }
 
 void
diff --git a/mesalib/src/mesa/main/shaderapi.h b/mesalib/src/mesa/main/shaderapi.h
index 8ee68d82d..d3199db96 100644
--- a/mesalib/src/mesa/main/shaderapi.h
+++ b/mesalib/src/mesa/main/shaderapi.h
@@ -190,8 +190,16 @@ _mesa_ShaderBinary(GLint n, const GLuint *shaders, GLenum binaryformat,
                    const void* binary, GLint length);
 
 extern void GLAPIENTRY
-_mesa_ProgramParameteriARB(GLuint program, GLenum pname,
-                           GLint value);
+_mesa_GetProgramBinary(GLuint program, GLsizei bufSize, GLsizei *length,
+                       GLenum *binaryFormat, GLvoid *binary);
+
+extern void GLAPIENTRY
+_mesa_ProgramBinary(GLuint program, GLenum binaryFormat,
+                    const GLvoid *binary, GLsizei length);
+
+extern void GLAPIENTRY
+_mesa_ProgramParameteri(GLuint program, GLenum pname, GLint value);
+
 void
 _mesa_use_shader_program(struct gl_context *ctx, GLenum type,
 			 struct gl_shader_program *shProg);
diff --git a/mesalib/src/mesa/main/texformat.c b/mesalib/src/mesa/main/texformat.c
index b3ffc6c51..4fb4b70f9 100644
--- a/mesalib/src/mesa/main/texformat.c
+++ b/mesalib/src/mesa/main/texformat.c
@@ -75,7 +75,9 @@ _mesa_choose_tex_format(struct gl_context *ctx, GLenum target,
 	    RETURN_IF_SUPPORTED(MESA_FORMAT_ARGB4444);
 	 } else if (type == GL_UNSIGNED_SHORT_1_5_5_5_REV) {
 	    RETURN_IF_SUPPORTED(MESA_FORMAT_ARGB1555);
-	 }
+         } else if (type == GL_UNSIGNED_INT_2_10_10_10_REV) {
+            RETURN_IF_SUPPORTED(MESA_FORMAT_ARGB2101010);
+         }
 	 RETURN_IF_SUPPORTED(MESA_FORMAT_RGBA8888);
 	 RETURN_IF_SUPPORTED(MESA_FORMAT_ARGB8888);
 	 break;
@@ -111,6 +113,10 @@ _mesa_choose_tex_format(struct gl_context *ctx, GLenum target,
       /* shallow RGB formats */
       case 3:
       case GL_RGB:
+         if (type == GL_UNSIGNED_INT_2_10_10_10_REV) {
+            RETURN_IF_SUPPORTED(MESA_FORMAT_ARGB2101010);
+         }
+         /* fallthrough */
       case GL_RGB8:
 	 RETURN_IF_SUPPORTED(MESA_FORMAT_RGB888);
 	 RETURN_IF_SUPPORTED(MESA_FORMAT_XRGB8888);
diff --git a/mesalib/src/mesa/main/teximage.c b/mesalib/src/mesa/main/teximage.c
index 33f81a25c..7d3abb7e0 100644
--- a/mesalib/src/mesa/main/teximage.c
+++ b/mesalib/src/mesa/main/teximage.c
@@ -1947,8 +1947,9 @@ texture_error_check( struct gl_context *ctx,
    err = _mesa_error_check_format_and_type(ctx, format, type);
    if (err != GL_NO_ERROR) {
       _mesa_error(ctx, err,
-                  "glTexImage%dD(incompatible format 0x%x, type 0x%x)",
-                  dimensions, format, type);
+                  "glTexImage%dD(incompatible format = %s, type = %s)",
+                  dimensions, _mesa_lookup_enum_by_nr(format),
+                  _mesa_lookup_enum_by_nr(type));
       return GL_TRUE;
    }
 
@@ -1960,8 +1961,9 @@ texture_error_check( struct gl_context *ctx,
        (_mesa_is_depthstencil_format(internalFormat) != _mesa_is_depthstencil_format(format)) ||
        (_mesa_is_dudv_format(internalFormat) != _mesa_is_dudv_format(format))) {
       _mesa_error(ctx, GL_INVALID_OPERATION,
-                  "glTexImage%dD(incompatible internalFormat 0x%x, format 0x%x)",
-                  dimensions, internalFormat, format);
+                  "glTexImage%dD(incompatible internalFormat = %s, format = %s)",
+                  dimensions, _mesa_lookup_enum_by_nr(internalFormat),
+                  _mesa_lookup_enum_by_nr(format));
       return GL_TRUE;
    }
 
@@ -2263,8 +2265,9 @@ texsubimage_error_check(struct gl_context *ctx, GLuint dimensions,
    err = _mesa_error_check_format_and_type(ctx, format, type);
    if (err != GL_NO_ERROR) {
       _mesa_error(ctx, err,
-                  "glTexSubImage%dD(incompatible format 0x%x, type 0x%x)",
-                  dimensions, format, type);
+                  "glTexSubImage%dD(incompatible format = %s, type = %s)",
+                  dimensions, _mesa_lookup_enum_by_nr(format),
+                  _mesa_lookup_enum_by_nr(type));
       return GL_TRUE;
    }
 
diff --git a/mesalib/src/mesa/main/texstore.c b/mesalib/src/mesa/main/texstore.c
index 751150937..a5c7712e0 100644
--- a/mesalib/src/mesa/main/texstore.c
+++ b/mesalib/src/mesa/main/texstore.c
@@ -1714,18 +1714,20 @@ _mesa_texstore_argb2101010(TEXSTORE_PARAMS)
                                                  srcPacking,
                                                  ctx->_ImageTransferState);
       const GLfloat *src = tempImage;
+      const GLushort aMask = (srcFormat == GL_RGB) ? 0xffff : 0;
       GLint img, row, col;
       if (!tempImage)
          return GL_FALSE;
       for (img = 0; img < srcDepth; img++) {
          GLubyte *dstRow = dstSlices[img];
-         if (baseInternalFormat == GL_RGBA) {
+         if (baseInternalFormat == GL_RGBA || baseInternalFormat == GL_RGB) {
             for (row = 0; row < srcHeight; row++) {
                GLuint *dstUI = (GLuint *) dstRow;
                for (col = 0; col < srcWidth; col++) {
                   GLushort a,r,g,b;
 
                   UNCLAMPED_FLOAT_TO_USHORT(a, src[ACOMP]);
+                  a = a | aMask;
                   UNCLAMPED_FLOAT_TO_USHORT(r, src[RCOMP]);
                   UNCLAMPED_FLOAT_TO_USHORT(g, src[GCOMP]);
                   UNCLAMPED_FLOAT_TO_USHORT(b, src[BCOMP]);
@@ -1734,20 +1736,6 @@ _mesa_texstore_argb2101010(TEXSTORE_PARAMS)
                }
                dstRow += dstRowStride;
             }
-         } else if (baseInternalFormat == GL_RGB) {
-            for (row = 0; row < srcHeight; row++) {
-               GLuint *dstUI = (GLuint *) dstRow;
-               for (col = 0; col < srcWidth; col++) {
-                  GLushort r,g,b;
-
-                  UNCLAMPED_FLOAT_TO_USHORT(r, src[RCOMP]);
-                  UNCLAMPED_FLOAT_TO_USHORT(g, src[GCOMP]);
-                  UNCLAMPED_FLOAT_TO_USHORT(b, src[BCOMP]);
-                  dstUI[col] = PACK_COLOR_2101010_US(0xffff, r, g, b);
-                  src += 4;
-               }
-               dstRow += dstRowStride;
-            }
          } else {
             ASSERT(0);
          }
diff --git a/mesalib/src/mesa/main/uniform_query.cpp b/mesalib/src/mesa/main/uniform_query.cpp
index afe9a08c1..efff8f381 100644
--- a/mesalib/src/mesa/main/uniform_query.cpp
+++ b/mesalib/src/mesa/main/uniform_query.cpp
@@ -864,7 +864,8 @@ _mesa_uniform_matrix(struct gl_context *ctx, struct gl_shader_program *shProg,
 
    /* GL_INVALID_VALUE is generated if `transpose' is not GL_FALSE.
     * http://www.khronos.org/opengles/sdk/docs/man/xhtml/glUniform.xml */
-   if (ctx->API == API_OPENGLES || ctx->API == API_OPENGLES2) {
+   if (ctx->API == API_OPENGLES
+       || (ctx->API == API_OPENGLES2 && ctx->Version < 30)) {
       if (transpose) {
 	 _mesa_error(ctx, GL_INVALID_VALUE,
 		     "glUniformMatrix(matrix transpose is not GL_FALSE)");
diff --git a/mesalib/src/mesa/main/varray.c b/mesalib/src/mesa/main/varray.c
index 5e4d6c3e6..e453b3b0e 100644
--- a/mesalib/src/mesa/main/varray.c
+++ b/mesalib/src/mesa/main/varray.c
@@ -1113,9 +1113,10 @@ _mesa_PrimitiveRestartIndex(GLuint index)
 
    ASSERT_OUTSIDE_BEGIN_END(ctx);
 
-   if (ctx->Array.RestartIndex != index) {
+   ctx->Array.RestartIndex = index;
+   if (ctx->Array.PrimitiveRestart && ctx->Array._RestartIndex != index) {
       FLUSH_VERTICES(ctx, _NEW_TRANSFORM);
-      ctx->Array.RestartIndex = index;
+      ctx->Array._RestartIndex = index;
    }
 }
 
diff --git a/mesalib/src/mesa/program/ir_to_mesa.cpp b/mesalib/src/mesa/program/ir_to_mesa.cpp
index d5b9683db..0f7439b3b 100644
--- a/mesalib/src/mesa/program/ir_to_mesa.cpp
+++ b/mesalib/src/mesa/program/ir_to_mesa.cpp
@@ -3061,7 +3061,7 @@ _mesa_glsl_compile_shader(struct gl_context *ctx, struct gl_shader *shader)
    }
 
    state->error = glcpp_preprocess(state, &source, &state->info_log,
-			     &ctx->Extensions, ctx->API);
+			     &ctx->Extensions, ctx);
 
    if (ctx->Shader.Flags & GLSL_DUMP) {
       printf("GLSL source for %s shader %d:\n",
diff --git a/mesalib/src/mesa/state_tracker/st_cb_queryobj.c b/mesalib/src/mesa/state_tracker/st_cb_queryobj.c
index 98b61f576..6a35c1b69 100644
--- a/mesalib/src/mesa/state_tracker/st_cb_queryobj.c
+++ b/mesalib/src/mesa/state_tracker/st_cb_queryobj.c
@@ -94,6 +94,7 @@ st_BeginQuery(struct gl_context *ctx, struct gl_query_object *q)
    /* convert GL query type to Gallium query type */
    switch (q->Target) {
    case GL_ANY_SAMPLES_PASSED:
+   case GL_ANY_SAMPLES_PASSED_CONSERVATIVE:
       /* fall-through */
    case GL_SAMPLES_PASSED_ARB:
       type = PIPE_QUERY_OCCLUSION_COUNTER;
diff --git a/mesalib/src/mesa/state_tracker/st_draw.c b/mesalib/src/mesa/state_tracker/st_draw.c
index 4800e1c87..7de2bb9b8 100644
--- a/mesalib/src/mesa/state_tracker/st_draw.c
+++ b/mesalib/src/mesa/state_tracker/st_draw.c
@@ -230,8 +230,8 @@ st_draw_vbo(struct gl_context *ctx,
       /* The VBO module handles restart for the non-indexed GLDrawArrays
        * so we only set these fields for indexed drawing:
        */
-      info.primitive_restart = ctx->Array.PrimitiveRestart;
-      info.restart_index = ctx->Array.RestartIndex;
+      info.primitive_restart = ctx->Array._PrimitiveRestart;
+      info.restart_index = ctx->Array._RestartIndex;
    }
    else {
       /* Transform feedback drawing is always non-indexed. */
diff --git a/mesalib/src/mesa/state_tracker/st_extensions.c b/mesalib/src/mesa/state_tracker/st_extensions.c
index e7cf4f3bb..17fe16ee3 100644
--- a/mesalib/src/mesa/state_tracker/st_extensions.c
+++ b/mesalib/src/mesa/state_tracker/st_extensions.c
@@ -265,8 +265,11 @@ void st_init_limits(struct st_context *st)
    c->GLSLSkipStrictMaxVaryingLimitCheck =
       screen->get_param(screen, PIPE_CAP_TGSI_CAN_COMPACT_VARYINGS);
 
-   if (can_ubo)
+   if (can_ubo) {
       st->ctx->Extensions.ARB_uniform_buffer_object = GL_TRUE;
+      st->ctx->Const.UniformBufferOffsetAlignment =
+         screen->get_param(screen, PIPE_CAP_CONSTANT_BUFFER_OFFSET_ALIGNMENT);
+   }
 }
 
 
diff --git a/mesalib/src/mesa/vbo/vbo_exec_array.c b/mesalib/src/mesa/vbo/vbo_exec_array.c
index 4b2c5298d..7e61f7b31 100644
--- a/mesalib/src/mesa/vbo/vbo_exec_array.c
+++ b/mesalib/src/mesa/vbo/vbo_exec_array.c
@@ -90,8 +90,8 @@ vbo_get_minmax_index(struct gl_context *ctx,
 		     GLuint *min_index, GLuint *max_index,
 		     const GLuint count)
 {
-   const GLboolean restart = ctx->Array.PrimitiveRestart;
-   const GLuint restartIndex = ctx->Array.RestartIndex;
+   const GLboolean restart = ctx->Array._PrimitiveRestart;
+   const GLuint restartIndex = ctx->Array._RestartIndex;
    const int index_size = vbo_sizeof_ib_type(ib->type);
    const char *indices;
    GLuint i;
@@ -536,7 +536,7 @@ vbo_handle_primitive_restart(struct gl_context *ctx,
 
    if ((ib != NULL) &&
        ctx->Const.PrimitiveRestartInSoftware &&
-       ctx->Array.PrimitiveRestart) {
+       ctx->Array._PrimitiveRestart) {
       /* Handle primitive restart in software */
       vbo_sw_primitive_restart(ctx, prim, nr_prims, ib);
    } else {
@@ -572,10 +572,10 @@ vbo_draw_arrays(struct gl_context *ctx, GLenum mode, GLint start,
    prim[0].base_instance = baseInstance;
 
    /* Implement the primitive restart index */
-   if (ctx->Array.PrimitiveRestart && ctx->Array.RestartIndex < count) {
+   if (ctx->Array._PrimitiveRestart && ctx->Array._RestartIndex < count) {
       GLuint primCount = 0;
 
-      if (ctx->Array.RestartIndex == start) {
+      if (ctx->Array._RestartIndex == start) {
          /* special case: RestartIndex at beginning */
          if (count > 1) {
             prim[0].start = start + 1;
@@ -583,7 +583,7 @@ vbo_draw_arrays(struct gl_context *ctx, GLenum mode, GLint start,
             primCount = 1;
          }
       }
-      else if (ctx->Array.RestartIndex == start + count - 1) {
+      else if (ctx->Array._RestartIndex == start + count - 1) {
          /* special case: RestartIndex at end */
          if (count > 1) {
             prim[0].start = start;
@@ -594,10 +594,10 @@ vbo_draw_arrays(struct gl_context *ctx, GLenum mode, GLint start,
       else {
          /* general case: RestartIndex in middle, split into two prims */
          prim[0].start = start;
-         prim[0].count = ctx->Array.RestartIndex - start;
+         prim[0].count = ctx->Array._RestartIndex - start;
 
          prim[1] = prim[0];
-         prim[1].start = ctx->Array.RestartIndex + 1;
+         prim[1].start = ctx->Array._RestartIndex + 1;
          prim[1].count = count - prim[1].start;
 
          primCount = 2;
diff --git a/mesalib/src/mesa/vbo/vbo_primitive_restart.c b/mesalib/src/mesa/vbo/vbo_primitive_restart.c
index 6f9d61c9b..a6a0149ca 100644
--- a/mesalib/src/mesa/vbo/vbo_primitive_restart.c
+++ b/mesalib/src/mesa/vbo/vbo_primitive_restart.c
@@ -171,7 +171,7 @@ vbo_sw_primitive_restart(struct gl_context *ctx,
    GLuint sub_prim_num;
    GLuint end_index;
    GLuint sub_end_index;
-   GLuint restart_index = ctx->Array.RestartIndex;
+   GLuint restart_index = ctx->Array._RestartIndex;
    struct _mesa_prim temp_prim;
    struct vbo_context *vbo = vbo_context(ctx);
    vbo_draw_func draw_prims_func = vbo->draw_prims;