Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 354 insertions, 0 deletions

diff --git a/openssl/VMS/mkshared.com b/openssl/VMS/mkshared.com
new file mode 100644
index 000000000..1356fb9dd
--- /dev/null
+++ b/openssl/VMS/mkshared.com
@@ -0,0 +1,354 @@
+$! MKSHARED.COM -- script to created shareable images on VMS
+$!
+$! No command line parameters.  This should be run at the start of the source
+$! tree (the same directory where one finds INSTALL.VMS).
+$!
+$! Input:	[.UTIL]LIBEAY.NUM,[.AXP.EXE.CRYPTO]LIBCRYPTO.OLB
+$!		[.UTIL]SSLEAY.NUM,[.AXP.EXE.SSL]LIBSSL.OLB
+$! Output:	[.AXP.EXE.CRYPTO]LIBCRYPTO.OPT,.MAP,.EXE
+$!		[.AXP.EXE.SSL]LIBSSL.OPT,.MAP,.EXE
+$!
+$! So far, tests have only been made on VMS for Alpha.  VAX will come in time.
+$! ===========================================================================
+$
+$! ----- Prepare info for processing: version number and file info
+$ gosub read_version_info
+$ if libver .eqs. ""
+$ then
+$   write sys$error "ERROR: Couldn't find any library version info..."
+$   exit
+$ endif
+$
+$ if f$getsyi("CPU") .ge. 128
+$ then
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.AXP.EXE.CRYPTO]"
+$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libopt = "''libdir'LIBCRYPTO.OPT"
+$   libmap = "''libdir'LIBCRYPTO.MAP"
+$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   libref = ""
+$   gosub create_axp_shr
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.AXP.EXE.SSL]"
+$   libolb = "''libdir'LIBSSL.OLB"
+$   libopt = "''libdir'LIBSSL.OPT"
+$   libmap = "''libdir'LIBSSL.MAP"
+$   libgoal= "''libdir'LIBSSL.EXE"
+$   libref = "[.AXP.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   gosub create_axp_shr
+$ else
+$   libtit = "CRYPTO_TRANSFER_VECTOR"
+$   libid  = "Crypto"
+$   libnum = "[.UTIL]LIBEAY.NUM"
+$   libdir = "[.VAX.EXE.CRYPTO]"
+$   libmar = "''libdir'LIBCRYPTO.MAR"
+$   libolb = "''libdir'LIBCRYPTO.OLB"
+$   libopt = "''libdir'LIBCRYPTO.OPT"
+$   libobj = "''libdir'LIBCRYPTO.OBJ"
+$   libmap = "''libdir'LIBCRYPTO.MAP"
+$   libgoal= "''libdir'LIBCRYPTO.EXE"
+$   libref = ""
+$   libvec = "LIBCRYPTO"
+$   gosub create_vax_shr
+$   libtit = "SSL_TRANSFER_VECTOR"
+$   libid  = "SSL"
+$   libnum = "[.UTIL]SSLEAY.NUM"
+$   libdir = "[.VAX.EXE.SSL]"
+$   libmar = "''libdir'LIBSSL.MAR"
+$   libolb = "''libdir'LIBSSL.OLB"
+$   libopt = "''libdir'LIBSSL.OPT"
+$   libobj = "''libdir'LIBSSL.OBJ"
+$   libmap = "''libdir'LIBSSL.MAP"
+$   libgoal= "''libdir'LIBSSL.EXE"
+$   libref = "[.VAX.EXE.CRYPTO]LIBCRYPTO.EXE"
+$   libvec = "LIBSSL"
+$   gosub create_vax_shr
+$ endif
+$ exit
+$
+$! ----- Soubroutines to actually build the shareable libraries
+$! The way things work, there's a main shareable library creator for each
+$! supported architecture, which is called from the main code above.
+$! The creator will define a number of variables to tell the next levels of
+$! subroutines what routines to use to write to the option files, call the
+$! main processor, read_func_num, and when that is done, it will write version
+$! data at the end of the .opt file, close it, and link the library.
+$!
+$! read_func_num reads through a .num file and calls the writer routine for
+$! each line.  It's also responsible for checking that order is properly kept
+$! in the .num file, check that each line applies to VMS and the architecture,
+$! and to fill in "holes" with dummy entries.
+$!
+$! The creator routines depend on the following variables:
+$! libnum	The name of the .num file to use as input
+$! libolb	The name of the object library to build from
+$! libid	The identification string of the shareable library
+$! libopt	The name of the .opt file to write
+$! libtit	The title of the assembler transfer vector file (VAX only)
+$! libmar	The name of the assembler transfer vector file (VAX only)
+$! libmap	The name of the map file to write
+$! libgoal	The name of the shareable library to write
+$! libref	The name of a shareable library to link in
+$!
+$! read_func_num depends on the following variables from the creator:
+$! libwriter	The name of the writer routine to call for each .num file line
+$! -----
+$
+$! ----- Subroutines for AXP
+$! -----
+$! The creator routine
+$ create_axp_shr:
+$   open/write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libolb,"/lib"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   write opt "SYMBOL_VECTOR=(-"
+$   libfirstentry := true
+$   libwrch   := opt
+$   libwriter := write_axp_transfer_entry
+$   textcount = 0
+$   gosub read_func_num
+$   write opt ")"
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   close opt
+$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   return
+$
+$! The record writer routine
+$ write_axp_transfer_entry:
+$   if libentry .eqs. ".dummy" then return
+$   if info_kind .eqs. "VARIABLE"
+$   then
+$     pr:=DATA
+$   else
+$     pr:=PROCEDURE
+$   endif
+$   textcount_this = f$length(pr) + f$length(libentry) + 5
+$   if textcount + textcount_this .gt. 1024
+$   then
+$     write opt ")"
+$     write opt "SYMBOL_VECTOR=(-"
+$     textcount = 16
+$     libfirstentry := true
+$   endif
+$   if libfirstentry
+$   then
+$     write 'libwrch' "    ",libentry,"=",pr," -"
+$   else
+$     write 'libwrch' "    ,",libentry,"=",pr," -"
+$   endif
+$   libfirstentry := false
+$   textcount = textcount + textcount_this
+$   return
+$
+$! ----- Subroutines for AXP
+$! -----
+$! The creator routine
+$ create_vax_shr:
+$   open/write mar 'libmar'
+$   type sys$input:/out=mar:
+;
+; Transfer vector for VAX shareable image
+;
+$   write mar "	.TITLE ",libtit
+$   write mar "	.IDENT /",libid,"/"
+$   type sys$input:/out=mar:
+;
+; Define macro to assist in building transfer vector entries.  Each entry
+; should take no more than 8 bytes.
+;
+	.MACRO FTRANSFER_ENTRY routine
+	.ALIGN QUAD
+	.TRANSFER routine
+	.MASK	routine
+	JMP	routine+2
+	.ENDM FTRANSFER_ENTRY
+;
+; Place entries in own program section.
+;
+$   write mar "	.PSECT $$",libvec,",QUAD,PIC,USR,CON,REL,LCL,SHR,EXE,RD,NOWRT"
+$   write mar libvec,"_xfer:"
+$   libwrch   := mar
+$   libwriter := write_vax_ftransfer_entry
+$   gosub read_func_num
+$   type sys$input:/out=mar:
+;
+; Allocate extra storage at end of vector to allow for expansion.
+;
+$   write mar "	.BLKB 32768-<.-",libvec,"_xfer>	; 64 pages total."
+$!   libwriter := write_vax_vtransfer_entry
+$!   gosub read_func_num
+$   write mar "	.END"
+$   close mar
+$   open/write opt 'libopt'
+$   write opt "identification=""",libid," ",libverstr,""""
+$   write opt libobj
+$   write opt libolb,"/lib"
+$   if libref .nes. "" then write opt libref,"/SHARE"
+$   type sys$input:/out=opt:
+!
+! Ensure transfer vector is at beginning of image
+!
+CLUSTER=FIRST
+$   write opt "COLLECT=FIRST,$$",libvec
+$   write opt "GSMATCH=",libvmatch,",",libver
+$   type sys$input:/out=opt:
+!
+! make psects nonshareable so image can be installed.
+!
+PSECT_ATTR=$CHAR_STRING_CONSTANTS,NOWRT
+$   libwrch   := opt
+$   libwriter := write_vax_psect_attr
+$   gosub read_func_num
+$   close opt
+$   macro/obj='libobj' 'libmar'
+$   link/map='libmap'/full/share='libgoal' 'libopt'/option
+$   return
+$
+$! The record writer routine for VAX functions
+$ write_vax_ftransfer_entry:
+$   if info_kind .nes. "FUNCTION" then return
+$   if libentry .eqs ".dummy"
+$   then
+$     write 'libwrch' "	.BLKB 8" ! Dummy is zeroes...
+$   else
+$     write 'libwrch' "	FTRANSFER_ENTRY ",libentry
+$   endif
+$   return
+$! The record writer routine for VAX variables (should never happen!)
+$ write_vax_psect_attr:
+$   if info_kind .nes. "VARIABLE" then return
+$   if libentry .eqs ".dummy" then return
+$   write 'libwrch' "PSECT_ATTR=",libentry,",NOSHR"
+$   return
+$
+$! ----- Common subroutines
+$! -----
+$! The .num file reader.  This one has great responsability.
+$ read_func_num:
+$   open libnum 'libnum'
+$   goto read_nums
+$
+$ read_nums:
+$   libentrynum=0
+$   liblastentry:=false
+$   entrycount=0
+$   loop:
+$     read/end=loop_end/err=loop_end libnum line
+$     entrynum=f$int(f$element(1," ",f$edit(line,"COMPRESS,TRIM")))
+$     entryinfo=f$element(2," ",f$edit(line,"COMPRESS,TRIM"))
+$     curentry=f$element(0," ",f$edit(line,"COMPRESS,TRIM"))
+$     info_exist=f$element(0,":",entryinfo)
+$     info_platforms=","+f$element(1,":",entryinfo)+","
+$     info_kind=f$element(2,":",entryinfo)
+$     info_algorithms=","+f$element(3,":",entryinfo)+","
+$     if info_exist .eqs. "NOEXIST" then goto loop
+$     truesum = 0
+$     falsesum = 0
+$     negatives = 1
+$     plat_i = 0
+$     loop1:
+$       plat_entry = f$element(plat_i,",",info_platforms)
+$       plat_i = plat_i + 1
+$       if plat_entry .eqs. "" then goto loop1
+$       if plat_entry .nes. ","
+$       then
+$         if f$extract(0,1,plat_entry) .nes. "!" then negatives = 0
+$         if f$getsyi("CPU") .lt. 128
+$         then
+$           if plat_entry .eqs. "EXPORT_VAR_AS_FUNCTION" then -
+$             truesum = truesum + 1
+$           if plat_entry .eqs. "!EXPORT_VAR_AS_FUNCTION" then -
+$             falsesum = falsesum + 1
+$         endif
+$         if plat_entry .eqs. "VMS" then truesum = truesum + 1
+$         if plat_entry .eqs. "!VMS" then falsesum = falsesum + 1
+$	  goto loop1
+$       endif
+$     endloop1:
+$!DEBUG!$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$!DEBUG!$     then
+$!DEBUG!$       write sys$output line
+$!DEBUG!$       write sys$output "        truesum = ",truesum,-
+$!DEBUG!		", negatives = ",negatives,", falsesum = ",falsesum
+$!DEBUG!$     endif
+$     if falsesum .ne. 0 then goto loop
+$     if truesum+negatives .eq. 0 then goto loop
+$     alg_i = 0
+$     loop2:
+$       alg_entry = f$element(alg_i,",",info_algorithms)
+$	alg_i = alg_i + 1
+$       if alg_entry .eqs. "" then goto loop2
+$       if alg_entry .nes. ","
+$       then
+$         if alg_entry .eqs. "KRB5" then goto loop ! Special for now
+$	  if alg_entry .eqs. "STATIC_ENGINE" then goto loop ! Special for now
+$         if f$trnlnm("OPENSSL_NO_"+alg_entry) .nes. "" then goto loop
+$	  goto loop2
+$       endif
+$     endloop2:
+$     if info_platforms - "EXPORT_VAR_AS_FUNCTION" .nes. info_platforms
+$     then
+$!DEBUG!$     write sys$output curentry," ; ",entrynum," ; ",entryinfo
+$     endif
+$   redo:
+$     next:=loop
+$     tolibentry=curentry
+$     if libentrynum .ne. entrynum
+$     then
+$       entrycount=entrycount+1
+$       if entrycount .lt. entrynum
+$       then
+$!DEBUG!$         write sys$output "Info: entrycount: ''entrycount', entrynum: ''entrynum' => 0"
+$         tolibentry=".dummy"
+$         next:=redo
+$       endif
+$       if entrycount .gt. entrynum
+$       then
+$         write sys$error "Decreasing library entry numbers!  Can't continue"
+$         write sys$error """",line,""""
+$         close libnum
+$         return
+$       endif
+$       libentry=tolibentry
+$!DEBUG!$       write sys$output entrycount," ",libentry," ",entryinfo
+$       if libentry .nes. "" .and. libwriter .nes. "" then gosub 'libwriter'
+$     else
+$       write sys$error "Info: ""''curentry'"" is an alias for ""''libentry'"".  Overriding..."
+$     endif
+$     libentrynum=entrycount
+$     goto 'next'
+$   loop_end:
+$   close libnum
+$   return
+$
+$! The version number reader
+$ read_version_info:
+$   libver = ""
+$   open/read vf [.CRYPTO]OPENSSLV.H
+$   loop_rvi:
+$     read/err=endloop_rvi/end=endloop_rvi vf rvi_line
+$     if rvi_line - "SHLIB_VERSION_NUMBER """ .eqs. rvi_line then -
+	goto loop_rvi
+$     libverstr = f$element(1,"""",rvi_line)
+$     libvmajor = f$element(0,".",libverstr)
+$     libvminor = f$element(1,".",libverstr)
+$     libvedit = f$element(2,".",libverstr)
+$     libvpatch = f$cvui(0,8,f$extract(1,1,libvedit)+"@")-f$cvui(0,8,"@")
+$     libvedit = f$extract(0,1,libvedit)
+$     libver = f$string(f$int(libvmajor)*100)+","+-
+	f$string(f$int(libvminor)*100+f$int(libvedit)*10+f$int(libvpatch))
+$     if libvmajor .eqs. "0"
+$     then
+$       libvmatch = "EQUAL"
+$     else
+$       ! Starting with the 1.0 release, backward compatibility should be
+$       ! kept, so switch over to the following
+$       libvmatch = "LEQUAL"
+$     endif
+$   endloop_rvi:
+$   close vf
+$   return