Upgraded to openssl 1.0.2a

3 files changed, 2 insertions, 1501 deletions

diff --git a/openssl/crypto/bn/Makefile b/openssl/crypto/bn/Makefile
index 0cdbd2016..5361dc827 100644
--- a/openssl/crypto/bn/Makefile
+++ b/openssl/crypto/bn/Makefile
@@ -108,8 +108,6 @@ x86_64-mont5.s:	asm/x86_64-mont5.pl
 	$(PERL) asm/x86_64-mont5.pl $(PERLASM_SCHEME) > $@
 x86_64-gf2m.s:	asm/x86_64-gf2m.pl
 	$(PERL) asm/x86_64-gf2m.pl $(PERLASM_SCHEME) > $@
-modexp512-x86_64.s:	asm/modexp512-x86_64.pl
-	$(PERL) asm/modexp512-x86_64.pl $(PERLASM_SCHEME) > $@
 rsaz-x86_64.s:	asm/rsaz-x86_64.pl
 	$(PERL) asm/rsaz-x86_64.pl $(PERLASM_SCHEME) > $@
 rsaz-avx2.s:	asm/rsaz-avx2.pl 
diff --git a/openssl/crypto/bn/asm/modexp512-x86_64.pl b/openssl/crypto/bn/asm/modexp512-x86_64.pl
deleted file mode 100644
index bfd6e9754..000000000
--- a/openssl/crypto/bn/asm/modexp512-x86_64.pl
+++ /dev/null
@@ -1,1497 +0,0 @@
-#!/usr/bin/env perl
-#
-# Copyright (c) 2010-2011 Intel Corp.
-#   Author: Vinodh.Gopal@intel.com
-#           Jim Guilford
-#           Erdinc.Ozturk@intel.com
-#           Maxim.Perminov@intel.com
-#
-# More information about algorithm used can be found at:
-#   http://www.cse.buffalo.edu/srds2009/escs2009_submission_Gopal.pdf
-#
-# ====================================================================
-# Copyright (c) 2011 The OpenSSL Project.  All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-#
-# 3. All advertising materials mentioning features or use of this
-#    software must display the following acknowledgment:
-#    "This product includes software developed by the OpenSSL Project
-#    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-#
-# 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-#    endorse or promote products derived from this software without
-#    prior written permission. For written permission, please contact
-#    licensing@OpenSSL.org.
-#
-# 5. Products derived from this software may not be called "OpenSSL"
-#    nor may "OpenSSL" appear in their names without prior written
-#    permission of the OpenSSL Project.
-#
-# 6. Redistributions of any form whatsoever must retain the following
-#    acknowledgment:
-#    "This product includes software developed by the OpenSSL Project
-#    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-#
-# THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
-# EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
-# ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-# ====================================================================
-
-$flavour = shift;
-$output  = shift;
-if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
-
-my $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
-die "can't locate x86_64-xlate.pl";
-
-open OUT,"| \"$^X\" $xlate $flavour $output";
-*STDOUT=*OUT;
-
-use strict;
-my $code=".text\n\n";
-my $m=0;
-
-#
-# Define x512 macros
-#
-
-#MULSTEP_512_ADD	MACRO	x7, x6, x5, x4, x3, x2, x1, x0, dst, src1, src2, add_src, tmp1, tmp2
-#
-# uses rax, rdx, and args
-sub MULSTEP_512_ADD
-{
- my ($x, $DST, $SRC2, $ASRC, $OP, $TMP)=@_;
- my @X=@$x;	# make a copy
-$code.=<<___;
-	 mov	(+8*0)($SRC2), %rax
-	 mul	$OP			# rdx:rax = %OP * [0]
-	 mov	($ASRC), $X[0]
-	 add	%rax, $X[0]
-	 adc	\$0, %rdx
-	 mov	$X[0], $DST
-___
-for(my $i=1;$i<8;$i++) {
-$code.=<<___;
-	 mov	%rdx, $TMP
-
-	 mov	(+8*$i)($SRC2), %rax
-	 mul	$OP			# rdx:rax = %OP * [$i]
-	 mov	(+8*$i)($ASRC), $X[$i]
-	 add	%rax, $X[$i]
-	 adc	\$0, %rdx
-	 add	$TMP, $X[$i]
-	 adc	\$0, %rdx
-___
-}
-$code.=<<___;
-	 mov	%rdx, $X[0]
-___
-}
-
-#MULSTEP_512	MACRO	x7, x6, x5, x4, x3, x2, x1, x0, dst, src2, src1_val, tmp
-#
-# uses rax, rdx, and args
-sub MULSTEP_512
-{
- my ($x, $DST, $SRC2, $OP, $TMP)=@_;
- my @X=@$x;	# make a copy
-$code.=<<___;
-	 mov	(+8*0)($SRC2), %rax
-	 mul	$OP			# rdx:rax = %OP * [0]
-	 add	%rax, $X[0]
-	 adc	\$0, %rdx
-	 mov	$X[0], $DST
-___
-for(my $i=1;$i<8;$i++) {
-$code.=<<___;
-	 mov	%rdx, $TMP
-
-	 mov	(+8*$i)($SRC2), %rax
-	 mul	$OP			# rdx:rax = %OP * [$i]
-	 add	%rax, $X[$i]
-	 adc	\$0, %rdx
-	 add	$TMP, $X[$i]
-	 adc	\$0, %rdx
-___
-}
-$code.=<<___;
-	 mov	%rdx, $X[0]
-___
-}
-
-#
-# Swizzle Macros
-#
-
-# macro to copy data from flat space to swizzled table
-#MACRO swizzle	pDst, pSrc, tmp1, tmp2
-# pDst and pSrc are modified
-sub swizzle
-{
- my ($pDst, $pSrc, $cnt, $d0)=@_;
-$code.=<<___;
-	 mov	\$8, $cnt
-loop_$m:
-	 mov	($pSrc), $d0
-	 mov	$d0#w, ($pDst)
-	 shr	\$16, $d0
-	 mov	$d0#w, (+64*1)($pDst)
-	 shr	\$16, $d0
-	 mov	$d0#w, (+64*2)($pDst)
-	 shr	\$16, $d0
-	 mov	$d0#w, (+64*3)($pDst)
-	 lea	8($pSrc), $pSrc
-	 lea	64*4($pDst), $pDst
-	 dec	$cnt
-	 jnz	loop_$m
-___
-
- $m++;
-}
-
-# macro to copy data from swizzled table to  flat space
-#MACRO unswizzle	pDst, pSrc, tmp*3
-sub unswizzle
-{
- my ($pDst, $pSrc, $cnt, $d0, $d1)=@_;
-$code.=<<___;
-	 mov	\$4, $cnt
-loop_$m:
-	 movzxw	(+64*3+256*0)($pSrc), $d0
-	 movzxw	(+64*3+256*1)($pSrc), $d1
-	 shl	\$16, $d0
-	 shl	\$16, $d1
-	 mov	(+64*2+256*0)($pSrc), $d0#w
-	 mov	(+64*2+256*1)($pSrc), $d1#w
-	 shl	\$16, $d0
-	 shl	\$16, $d1
-	 mov	(+64*1+256*0)($pSrc), $d0#w
-	 mov	(+64*1+256*1)($pSrc), $d1#w
-	 shl	\$16, $d0
-	 shl	\$16, $d1
-	 mov	(+64*0+256*0)($pSrc), $d0#w
-	 mov	(+64*0+256*1)($pSrc), $d1#w
-	 mov	$d0, (+8*0)($pDst)
-	 mov	$d1, (+8*1)($pDst)
-	 lea	256*2($pSrc), $pSrc
-	 lea	8*2($pDst), $pDst
-	 sub	\$1, $cnt
-	 jnz	loop_$m
-___
-
- $m++;
-}
-
-#
-# Data Structures
-#
-
-# Reduce Data
-#
-#
-# Offset  Value
-# 0C0     Carries
-# 0B8     X2[10]
-# 0B0     X2[9]
-# 0A8     X2[8]
-# 0A0     X2[7]
-# 098     X2[6]
-# 090     X2[5]
-# 088     X2[4]
-# 080     X2[3]
-# 078     X2[2]
-# 070     X2[1]
-# 068     X2[0]
-# 060     X1[12]  P[10]
-# 058     X1[11]  P[9]  Z[8]
-# 050     X1[10]  P[8]  Z[7]
-# 048     X1[9]   P[7]  Z[6]
-# 040     X1[8]   P[6]  Z[5]
-# 038     X1[7]   P[5]  Z[4]
-# 030     X1[6]   P[4]  Z[3]
-# 028     X1[5]   P[3]  Z[2]
-# 020     X1[4]   P[2]  Z[1]
-# 018     X1[3]   P[1]  Z[0]
-# 010     X1[2]   P[0]  Y[2]
-# 008     X1[1]   Q[1]  Y[1]
-# 000     X1[0]   Q[0]  Y[0]
-
-my $X1_offset           =  0;			# 13 qwords
-my $X2_offset           =  $X1_offset + 13*8;			# 11 qwords
-my $Carries_offset      =  $X2_offset + 11*8;			# 1 qword
-my $Q_offset            =  0;			# 2 qwords
-my $P_offset            =  $Q_offset + 2*8;			# 11 qwords
-my $Y_offset            =  0;			# 3 qwords
-my $Z_offset            =  $Y_offset + 3*8;			# 9 qwords
-
-my $Red_Data_Size       =  $Carries_offset + 1*8;			# (25 qwords)
-
-#
-# Stack Frame
-#
-#
-# offset	value
-# ...		<old stack contents>
-# ...
-# 280		Garray
-
-# 278		tmp16[15]
-# ...		...
-# 200		tmp16[0]
-
-# 1F8		tmp[7]
-# ...		...
-# 1C0		tmp[0]
-
-# 1B8		GT[7]
-# ...		...
-# 180		GT[0]
-
-# 178		Reduce Data
-# ...		...
-# 0B8		Reduce Data
-# 0B0		reserved
-# 0A8		reserved
-# 0A0		reserved
-# 098		reserved
-# 090		reserved
-# 088		reduce result addr
-# 080		exp[8]
-
-# ...
-# 048		exp[1]
-# 040		exp[0]
-
-# 038		reserved
-# 030		loop_idx
-# 028		pg
-# 020		i
-# 018		pData	; arg 4
-# 010		pG	; arg 2
-# 008		pResult	; arg 1
-# 000		rsp	; stack pointer before subtract
-
-my $rsp_offset          =  0;
-my $pResult_offset      =  8*1 + $rsp_offset;
-my $pG_offset           =  8*1 + $pResult_offset;
-my $pData_offset        =  8*1 + $pG_offset;
-my $i_offset            =  8*1 + $pData_offset;
-my $pg_offset           =  8*1 + $i_offset;
-my $loop_idx_offset     =  8*1 + $pg_offset;
-my $reserved1_offset    =  8*1 + $loop_idx_offset;
-my $exp_offset          =  8*1 + $reserved1_offset;
-my $red_result_addr_offset=  8*9 + $exp_offset;
-my $reserved2_offset    =  8*1 + $red_result_addr_offset;
-my $Reduce_Data_offset  =  8*5 + $reserved2_offset;
-my $GT_offset           =  $Red_Data_Size + $Reduce_Data_offset;
-my $tmp_offset          =  8*8 + $GT_offset;
-my $tmp16_offset        =  8*8 + $tmp_offset;
-my $garray_offset       =  8*16 + $tmp16_offset;
-my $mem_size            =  8*8*32 + $garray_offset;
-
-#
-# Offsets within Reduce Data
-#
-#
-#	struct MODF_2FOLD_MONT_512_C1_DATA {
-#	UINT64 t[8][8];
-#	UINT64 m[8];
-#	UINT64 m1[8]; /* 2^768 % m */
-#	UINT64 m2[8]; /* 2^640 % m */
-#	UINT64 k1[2]; /* (- 1/m) % 2^128 */
-#	};
-
-my $T                   =  0;
-my $M                   =  512;			# = 8 * 8 * 8
-my $M1                  =  576;			# = 8 * 8 * 9 /* += 8 * 8 */
-my $M2                  =  640;			# = 8 * 8 * 10 /* += 8 * 8 */
-my $K1                  =  704;			# = 8 * 8 * 11 /* += 8 * 8 */
-
-#
-#   FUNCTIONS
-#
-
-{{{
-#
-# MULADD_128x512 : Function to multiply 128-bits (2 qwords) by 512-bits (8 qwords)
-#                       and add 512-bits (8 qwords)
-#                       to get 640 bits (10 qwords)
-# Input: 128-bit mul source: [rdi+8*1], rbp
-#        512-bit mul source: [rsi+8*n]
-#        512-bit add source: r15, r14, ..., r9, r8
-# Output: r9, r8, r15, r14, r13, r12, r11, r10, [rcx+8*1], [rcx+8*0]
-# Clobbers all regs except: rcx, rsi, rdi
-$code.=<<___;
-.type	MULADD_128x512,\@abi-omnipotent
-.align	16
-MULADD_128x512:
-___
-	&MULSTEP_512([map("%r$_",(8..15))], "(+8*0)(%rcx)", "%rsi", "%rbp", "%rbx");
-$code.=<<___;
-	 mov	(+8*1)(%rdi), %rbp
-___
-	&MULSTEP_512([map("%r$_",(9..15,8))], "(+8*1)(%rcx)", "%rsi", "%rbp", "%rbx");
-$code.=<<___;
-	 ret
-.size	MULADD_128x512,.-MULADD_128x512
-___
-}}}
-
-{{{
-#MULADD_256x512	MACRO	pDst, pA, pB, OP, TMP, X7, X6, X5, X4, X3, X2, X1, X0
-#
-# Inputs: pDst: Destination  (768 bits, 12 qwords)
-#         pA:   Multiplicand (1024 bits, 16 qwords)
-#         pB:   Multiplicand (512 bits, 8 qwords)
-# Dst = Ah * B + Al
-# where Ah is (in qwords) A[15:12] (256 bits) and Al is A[7:0] (512 bits)
-# Results in X3 X2 X1 X0 X7 X6 X5 X4 Dst[3:0]
-# Uses registers: arguments, RAX, RDX
-sub MULADD_256x512
-{
- my ($pDst, $pA, $pB, $OP, $TMP, $X)=@_;
-$code.=<<___;
-	mov	(+8*12)($pA), $OP
-___
-	&MULSTEP_512_ADD($X, "(+8*0)($pDst)", $pB, $pA, $OP, $TMP);
-	push(@$X,shift(@$X));
-
-$code.=<<___;
-	 mov	(+8*13)($pA), $OP
-___
-	&MULSTEP_512($X, "(+8*1)($pDst)", $pB, $OP, $TMP);
-	push(@$X,shift(@$X));
-
-$code.=<<___;
-	 mov	(+8*14)($pA), $OP
-___
-	&MULSTEP_512($X, "(+8*2)($pDst)", $pB, $OP, $TMP);
-	push(@$X,shift(@$X));
-
-$code.=<<___;
-	 mov	(+8*15)($pA), $OP
-___
-	&MULSTEP_512($X, "(+8*3)($pDst)", $pB, $OP, $TMP);
-	push(@$X,shift(@$X));
-}
-
-#
-# mont_reduce(UINT64 *x,  /* 1024 bits, 16 qwords */
-#	       UINT64 *m,  /*  512 bits,  8 qwords */
-#	       MODF_2FOLD_MONT_512_C1_DATA *data,
-#             UINT64 *r)  /*  512 bits,  8 qwords */
-# Input:  x (number to be reduced): tmp16 (Implicit)
-#         m (modulus):              [pM]  (Implicit)
-#         data (reduce data):       [pData] (Implicit)
-# Output: r (result):		     Address in [red_res_addr]
-#         result also in: r9, r8, r15, r14, r13, r12, r11, r10
-
-my @X=map("%r$_",(8..15));
-
-$code.=<<___;
-.type	mont_reduce,\@abi-omnipotent
-.align	16
-mont_reduce:
-___
-
-my $STACK_DEPTH         =  8;
-	#
-	# X1 = Xh * M1 + Xl
-$code.=<<___;
-	 lea	(+$Reduce_Data_offset+$X1_offset+$STACK_DEPTH)(%rsp), %rdi			# pX1 (Dst) 769 bits, 13 qwords
-	 mov	(+$pData_offset+$STACK_DEPTH)(%rsp), %rsi			# pM1 (Bsrc) 512 bits, 8 qwords
-	 add	\$$M1, %rsi
-	 lea	(+$tmp16_offset+$STACK_DEPTH)(%rsp), %rcx			# X (Asrc) 1024 bits, 16 qwords
-
-___
-
-	&MULADD_256x512("%rdi", "%rcx", "%rsi", "%rbp", "%rbx", \@X);	# rotates @X 4 times
-	# results in r11, r10, r9, r8, r15, r14, r13, r12, X1[3:0]
-
-$code.=<<___;
-	 xor	%rax, %rax
-	# X1 += xl
-	 add	(+8*8)(%rcx), $X[4]
-	 adc	(+8*9)(%rcx), $X[5]
-	 adc	(+8*10)(%rcx), $X[6]
-	 adc	(+8*11)(%rcx), $X[7]
-	 adc	\$0, %rax
-	# X1 is now rax, r11-r8, r15-r12, tmp16[3:0]
-
-	#
-	# check for carry ;; carry stored in rax
-	 mov	$X[4], (+8*8)(%rdi)			# rdi points to X1
-	 mov	$X[5], (+8*9)(%rdi)
-	 mov	$X[6], %rbp
-	 mov	$X[7], (+8*11)(%rdi)
-
-	 mov	%rax, (+$Reduce_Data_offset+$Carries_offset+$STACK_DEPTH)(%rsp)
-
-	 mov	(+8*0)(%rdi), $X[4]
-	 mov	(+8*1)(%rdi), $X[5]
-	 mov	(+8*2)(%rdi), $X[6]
-	 mov	(+8*3)(%rdi), $X[7]
-
-	# X1 is now stored in: X1[11], rbp, X1[9:8], r15-r8
-	# rdi -> X1
-	# rsi -> M1
-
-	#
-	# X2 = Xh * M2 + Xl
-	# do first part (X2 = Xh * M2)
-	 add	\$8*10, %rdi			# rdi -> pXh ; 128 bits, 2 qwords
-				#        Xh is actually { [rdi+8*1], rbp }
-	 add	\$`$M2-$M1`, %rsi			# rsi -> M2
-	 lea	(+$Reduce_Data_offset+$X2_offset+$STACK_DEPTH)(%rsp), %rcx			# rcx -> pX2 ; 641 bits, 11 qwords
-___
-	unshift(@X,pop(@X));	unshift(@X,pop(@X));
-$code.=<<___;
-
-	 call	MULADD_128x512			# args in rcx, rdi / rbp, rsi, r15-r8
-	# result in r9, r8, r15, r14, r13, r12, r11, r10, X2[1:0]
-	 mov	(+$Reduce_Data_offset+$Carries_offset+$STACK_DEPTH)(%rsp), %rax
-
-	# X2 += Xl
-	 add	(+8*8-8*10)(%rdi), $X[6]		# (-8*10) is to adjust rdi -> Xh to Xl
-	 adc	(+8*9-8*10)(%rdi), $X[7]
-	 mov	$X[6], (+8*8)(%rcx)
-	 mov	$X[7], (+8*9)(%rcx)
-
-	 adc	%rax, %rax
-	 mov	%rax, (+$Reduce_Data_offset+$Carries_offset+$STACK_DEPTH)(%rsp)
-
-	 lea	(+$Reduce_Data_offset+$Q_offset+$STACK_DEPTH)(%rsp), %rdi			# rdi -> pQ ; 128 bits, 2 qwords
-	 add	\$`$K1-$M2`, %rsi			# rsi -> pK1 ; 128 bits, 2 qwords
-
-	# MUL_128x128t128	rdi, rcx, rsi	; Q = X2 * K1 (bottom half)
-	# B1:B0 = rsi[1:0] = K1[1:0]
-	# A1:A0 = rcx[1:0] = X2[1:0]
-	# Result = rdi[1],rbp = Q[1],rbp
-	 mov	(%rsi), %r8			# B0
-	 mov	(+8*1)(%rsi), %rbx			# B1
-
-	 mov	(%rcx), %rax			# A0
-	 mul	%r8			# B0
-	 mov	%rax, %rbp
-	 mov	%rdx, %r9
-
-	 mov	(+8*1)(%rcx), %rax			# A1
-	 mul	%r8			# B0
-	 add	%rax, %r9
-
-	 mov	(%rcx), %rax			# A0
-	 mul	%rbx			# B1
-	 add	%rax, %r9
-
-	 mov	%r9, (+8*1)(%rdi)
-	# end MUL_128x128t128
-
-	 sub	\$`$K1-$M`, %rsi
-
-	 mov	(%rcx), $X[6]
-	 mov	(+8*1)(%rcx), $X[7]			# r9:r8 = X2[1:0]
-
-	 call	MULADD_128x512			# args in rcx, rdi / rbp, rsi, r15-r8
-	# result in r9, r8, r15, r14, r13, r12, r11, r10, X2[1:0]
-
-	# load first half of m to rdx, rdi, rbx, rax
-	# moved this here for efficiency
-	 mov	(+8*0)(%rsi), %rax
-	 mov	(+8*1)(%rsi), %rbx
-	 mov	(+8*2)(%rsi), %rdi
-	 mov	(+8*3)(%rsi), %rdx
-
-	# continue with reduction
-	 mov	(+$Reduce_Data_offset+$Carries_offset+$STACK_DEPTH)(%rsp), %rbp
-
-	 add	(+8*8)(%rcx), $X[6]
-	 adc	(+8*9)(%rcx), $X[7]
-
-	#accumulate the final carry to rbp
-	 adc	%rbp, %rbp
-
-	# Add in overflow corrections: R = (X2>>128) += T[overflow]
-	# R = {r9, r8, r15, r14, ..., r10}
-	 shl	\$3, %rbp
-	 mov	(+$pData_offset+$STACK_DEPTH)(%rsp), %rcx			# rsi -> Data (and points to T)
-	 add	%rcx, %rbp			# pT ; 512 bits, 8 qwords, spread out
-
-	# rsi will be used to generate a mask after the addition
-	 xor	%rsi, %rsi
-
-	 add	(+8*8*0)(%rbp), $X[0]
-	 adc	(+8*8*1)(%rbp), $X[1]
-	 adc	(+8*8*2)(%rbp), $X[2]
-	 adc	(+8*8*3)(%rbp), $X[3]
-	 adc	(+8*8*4)(%rbp), $X[4]
-	 adc	(+8*8*5)(%rbp), $X[5]
-	 adc	(+8*8*6)(%rbp), $X[6]
-	 adc	(+8*8*7)(%rbp), $X[7]
-
-	# if there is a carry:	rsi = 0xFFFFFFFFFFFFFFFF
-	# if carry is clear:	rsi = 0x0000000000000000
-	 sbb	\$0, %rsi
-
-	# if carry is clear, subtract 0. Otherwise, subtract 256 bits of m
-	 and	%rsi, %rax
-	 and	%rsi, %rbx
-	 and	%rsi, %rdi
-	 and	%rsi, %rdx
-
-	 mov	\$1, %rbp
-	 sub	%rax, $X[0]
-	 sbb	%rbx, $X[1]
-	 sbb	%rdi, $X[2]
-	 sbb	%rdx, $X[3]
-
-	# if there is a borrow:		rbp = 0
-	# if there is no borrow:	rbp = 1
-	# this is used to save the borrows in between the first half and the 2nd half of the subtraction of m
-	 sbb	\$0, %rbp
-
-	#load second half of m to rdx, rdi, rbx, rax
-
-	 add	\$$M, %rcx
-	 mov	(+8*4)(%rcx), %rax
-	 mov	(+8*5)(%rcx), %rbx
-	 mov	(+8*6)(%rcx), %rdi
-	 mov	(+8*7)(%rcx), %rdx
-
-	# use the rsi mask as before
-	# if carry is clear, subtract 0. Otherwise, subtract 256 bits of m
-	 and	%rsi, %rax
-	 and	%rsi, %rbx
-	 and	%rsi, %rdi
-	 and	%rsi, %rdx
-
-	# if rbp = 0, there was a borrow before, it is moved to the carry flag
-	# if rbp = 1, there was not a borrow before, carry flag is cleared
-	 sub	\$1, %rbp
-
-	 sbb	%rax, $X[4]
-	 sbb	%rbx, $X[5]
-	 sbb	%rdi, $X[6]
-	 sbb	%rdx, $X[7]
-
-	# write R back to memory
-
-	 mov	(+$red_result_addr_offset+$STACK_DEPTH)(%rsp), %rsi
-	 mov	$X[0], (+8*0)(%rsi)
-	 mov	$X[1], (+8*1)(%rsi)
-	 mov	$X[2], (+8*2)(%rsi)
-	 mov	$X[3], (+8*3)(%rsi)
-	 mov	$X[4], (+8*4)(%rsi)
-	 mov	$X[5], (+8*5)(%rsi)
-	 mov	$X[6], (+8*6)(%rsi)
-	 mov	$X[7], (+8*7)(%rsi)
-
-	 ret
-.size	mont_reduce,.-mont_reduce
-___
-}}}
-
-{{{
-#MUL_512x512	MACRO	pDst, pA, pB, x7, x6, x5, x4, x3, x2, x1, x0, tmp*2
-#
-# Inputs: pDst: Destination  (1024 bits, 16 qwords)
-#         pA:   Multiplicand (512 bits, 8 qwords)
-#         pB:   Multiplicand (512 bits, 8 qwords)
-# Uses registers rax, rdx, args
-#   B operand in [pB] and also in x7...x0
-sub MUL_512x512
-{
- my ($pDst, $pA, $pB, $x, $OP, $TMP, $pDst_o)=@_;
- my ($pDst,  $pDst_o) = ($pDst =~ m/([^+]*)\+?(.*)?/);
- my @X=@$x;	# make a copy
-
-$code.=<<___;
-	 mov	(+8*0)($pA), $OP
-
-	 mov	$X[0], %rax
-	 mul	$OP			# rdx:rax = %OP * [0]
-	 mov	%rax, (+$pDst_o+8*0)($pDst)
-	 mov	%rdx, $X[0]
-___
-for(my $i=1;$i<8;$i++) {
-$code.=<<___;
-	 mov	$X[$i], %rax
-	 mul	$OP			# rdx:rax = %OP * [$i]
-	 add	%rax, $X[$i-1]
-	 adc	\$0, %rdx
-	 mov	%rdx, $X[$i]
-___
-}
-
-for(my $i=1;$i<8;$i++) {
-$code.=<<___;
-	 mov	(+8*$i)($pA), $OP
-___
-
-	&MULSTEP_512(\@X, "(+$pDst_o+8*$i)($pDst)", $pB, $OP, $TMP);
-	push(@X,shift(@X));
-}
-
-$code.=<<___;
-	 mov	$X[0], (+$pDst_o+8*8)($pDst)
-	 mov	$X[1], (+$pDst_o+8*9)($pDst)
-	 mov	$X[2], (+$pDst_o+8*10)($pDst)
-	 mov	$X[3], (+$pDst_o+8*11)($pDst)
-	 mov	$X[4], (+$pDst_o+8*12)($pDst)
-	 mov	$X[5], (+$pDst_o+8*13)($pDst)
-	 mov	$X[6], (+$pDst_o+8*14)($pDst)
-	 mov	$X[7], (+$pDst_o+8*15)($pDst)
-___
-}
-
-#
-# mont_mul_a3b : subroutine to compute (Src1 * Src2) % M (all 512-bits)
-# Input:  src1: Address of source 1: rdi
-#         src2: Address of source 2: rsi
-# Output: dst:  Address of destination: [red_res_addr]
-#    src2 and result also in: r9, r8, r15, r14, r13, r12, r11, r10
-# Temp:   Clobbers [tmp16], all registers
-$code.=<<___;
-.type	mont_mul_a3b,\@abi-omnipotent
-.align	16
-mont_mul_a3b:
-	#
-	# multiply tmp = src1 * src2
-	# For multiply: dst = rcx, src1 = rdi, src2 = rsi
-	# stack depth is extra 8 from call
-___
-	&MUL_512x512("%rsp+$tmp16_offset+8", "%rdi", "%rsi", [map("%r$_",(10..15,8..9))], "%rbp", "%rbx");
-$code.=<<___;
-	#
-	# Dst = tmp % m
-	# Call reduce(tmp, m, data, dst)
-
-	# tail recursion optimization: jmp to mont_reduce and return from there
-	 jmp	mont_reduce
-	# call	mont_reduce
-	# ret
-.size	mont_mul_a3b,.-mont_mul_a3b
-___
-}}}
-
-{{{
-#SQR_512 MACRO pDest, pA, x7, x6, x5, x4, x3, x2, x1, x0, tmp*4
-#
-# Input in memory [pA] and also in x7...x0
-# Uses all argument registers plus rax and rdx
-#
-# This version computes all of the off-diagonal terms into memory,
-# and then it adds in the diagonal terms
-
-sub SQR_512
-{
- my ($pDst, $pA, $x, $A, $tmp, $x7, $x6, $pDst_o)=@_;
- my ($pDst,  $pDst_o) = ($pDst =~ m/([^+]*)\+?(.*)?/);
- my @X=@$x;	# make a copy
-$code.=<<___;
-	# ------------------
-	# first pass 01...07
-	# ------------------
-	 mov	$X[0], $A
-
-	 mov	$X[1],%rax
-	 mul	$A
-	 mov	%rax, (+$pDst_o+8*1)($pDst)
-___
-for(my $i=2;$i<8;$i++) {
-$code.=<<___;
-	 mov	%rdx, $X[$i-2]
-	 mov	$X[$i],%rax
-	 mul	$A
-	 add	%rax, $X[$i-2]
-	 adc	\$0, %rdx
-___
-}
-$code.=<<___;
-	 mov	%rdx, $x7
-
-	 mov	$X[0], (+$pDst_o+8*2)($pDst)
-
-	# ------------------
-	# second pass 12...17
-	# ------------------
-
-	 mov	(+8*1)($pA), $A
-
-	 mov	(+8*2)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[1]
-	 adc	\$0, %rdx
-	 mov	$X[1], (+$pDst_o+8*3)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*3)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[2]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[2]
-	 adc	\$0, %rdx
-	 mov	$X[2], (+$pDst_o+8*4)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*4)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[3]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[3]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*5)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[4]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[4]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	$X[6],%rax
-	 mul	$A
-	 add	%rax, $X[5]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[5]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $x7
-	 adc	\$0, %rdx
-	 add	$X[0], $x7
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[1]
-
-	# ------------------
-	# third pass 23...27
-	# ------------------
-	 mov	(+8*2)($pA), $A
-
-	 mov	(+8*3)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[3]
-	 adc	\$0, %rdx
-	 mov	$X[3], (+$pDst_o+8*5)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*4)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[4]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[4]
-	 adc	\$0, %rdx
-	 mov	$X[4], (+$pDst_o+8*6)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*5)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[5]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[5]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	$X[6],%rax
-	 mul	$A
-	 add	%rax, $x7
-	 adc	\$0, %rdx
-	 add	$X[0], $x7
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $X[1]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[1]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[2]
-
-	# ------------------
-	# fourth pass 34...37
-	# ------------------
-
-	 mov	(+8*3)($pA), $A
-
-	 mov	(+8*4)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[5]
-	 adc	\$0, %rdx
-	 mov	$X[5], (+$pDst_o+8*7)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	(+8*5)($pA),%rax
-	 mul	$A
-	 add	%rax, $x7
-	 adc	\$0, %rdx
-	 add	$X[0], $x7
-	 adc	\$0, %rdx
-	 mov	$x7, (+$pDst_o+8*8)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	$X[6],%rax
-	 mul	$A
-	 add	%rax, $X[1]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[1]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[0]
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $X[2]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[2]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[5]
-
-	# ------------------
-	# fifth pass 45...47
-	# ------------------
-	 mov	(+8*4)($pA), $A
-
-	 mov	(+8*5)($pA),%rax
-	 mul	$A
-	 add	%rax, $X[1]
-	 adc	\$0, %rdx
-	 mov	$X[1], (+$pDst_o+8*9)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	$X[6],%rax
-	 mul	$A
-	 add	%rax, $X[2]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[2]
-	 adc	\$0, %rdx
-	 mov	$X[2], (+$pDst_o+8*10)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $X[5]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[5]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $X[1]
-
-	# ------------------
-	# sixth pass 56...57
-	# ------------------
-	 mov	(+8*5)($pA), $A
-
-	 mov	$X[6],%rax
-	 mul	$A
-	 add	%rax, $X[5]
-	 adc	\$0, %rdx
-	 mov	$X[5], (+$pDst_o+8*11)($pDst)
-
-	 mov	%rdx, $X[0]
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $X[1]
-	 adc	\$0, %rdx
-	 add	$X[0], $X[1]
-	 adc	\$0, %rdx
-	 mov	$X[1], (+$pDst_o+8*12)($pDst)
-
-	 mov	%rdx, $X[2]
-
-	# ------------------
-	# seventh pass 67
-	# ------------------
-	 mov	$X[6], $A
-
-	 mov	$X[7],%rax
-	 mul	$A
-	 add	%rax, $X[2]
-	 adc	\$0, %rdx
-	 mov	$X[2], (+$pDst_o+8*13)($pDst)
-
-	 mov	%rdx, (+$pDst_o+8*14)($pDst)
-
-	# start finalize (add	in squares, and double off-terms)
-	 mov	(+$pDst_o+8*1)($pDst), $X[0]
-	 mov	(+$pDst_o+8*2)($pDst), $X[1]
-	 mov	(+$pDst_o+8*3)($pDst), $X[2]
-	 mov	(+$pDst_o+8*4)($pDst), $X[3]
-	 mov	(+$pDst_o+8*5)($pDst), $X[4]
-	 mov	(+$pDst_o+8*6)($pDst), $X[5]
-
-	 mov	(+8*3)($pA), %rax
-	 mul	%rax
-	 mov	%rax, $x6
-	 mov	%rdx, $X[6]
-
-	 add	$X[0], $X[0]
-	 adc	$X[1], $X[1]
-	 adc	$X[2], $X[2]
-	 adc	$X[3], $X[3]
-	 adc	$X[4], $X[4]
-	 adc	$X[5], $X[5]
-	 adc	\$0, $X[6]
-
-	 mov	(+8*0)($pA), %rax
-	 mul	%rax
-	 mov	%rax, (+$pDst_o+8*0)($pDst)
-	 mov	%rdx, $A
-
-	 mov	(+8*1)($pA), %rax
-	 mul	%rax
-
-	 add	$A, $X[0]
-	 adc	%rax, $X[1]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $A
-	 mov	$X[0], (+$pDst_o+8*1)($pDst)
-	 mov	$X[1], (+$pDst_o+8*2)($pDst)
-
-	 mov	(+8*2)($pA), %rax
-	 mul	%rax
-
-	 add	$A, $X[2]
-	 adc	%rax, $X[3]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $A
-
-	 mov	$X[2], (+$pDst_o+8*3)($pDst)
-	 mov	$X[3], (+$pDst_o+8*4)($pDst)
-
-	 xor	$tmp, $tmp
-	 add	$A, $X[4]
-	 adc	$x6, $X[5]
-	 adc	\$0, $tmp
-
-	 mov	$X[4], (+$pDst_o+8*5)($pDst)
-	 mov	$X[5], (+$pDst_o+8*6)($pDst)
-
-	# %%tmp has 0/1 in column 7
-	# %%A6 has a full value in column 7
-
-	 mov	(+$pDst_o+8*7)($pDst), $X[0]
-	 mov	(+$pDst_o+8*8)($pDst), $X[1]
-	 mov	(+$pDst_o+8*9)($pDst), $X[2]
-	 mov	(+$pDst_o+8*10)($pDst), $X[3]
-	 mov	(+$pDst_o+8*11)($pDst), $X[4]
-	 mov	(+$pDst_o+8*12)($pDst), $X[5]
-	 mov	(+$pDst_o+8*13)($pDst), $x6
-	 mov	(+$pDst_o+8*14)($pDst), $x7
-
-	 mov	$X[7], %rax
-	 mul	%rax
-	 mov	%rax, $X[7]
-	 mov	%rdx, $A
-
-	 add	$X[0], $X[0]
-	 adc	$X[1], $X[1]
-	 adc	$X[2], $X[2]
-	 adc	$X[3], $X[3]
-	 adc	$X[4], $X[4]
-	 adc	$X[5], $X[5]
-	 adc	$x6, $x6
-	 adc	$x7, $x7
-	 adc	\$0, $A
-
-	 add	$tmp, $X[0]
-
-	 mov	(+8*4)($pA), %rax
-	 mul	%rax
-
-	 add	$X[6], $X[0]
-	 adc	%rax, $X[1]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $tmp
-
-	 mov	$X[0], (+$pDst_o+8*7)($pDst)
-	 mov	$X[1], (+$pDst_o+8*8)($pDst)
-
-	 mov	(+8*5)($pA), %rax
-	 mul	%rax
-
-	 add	$tmp, $X[2]
-	 adc	%rax, $X[3]
-	 adc	\$0, %rdx
-
-	 mov	%rdx, $tmp
-
-	 mov	$X[2], (+$pDst_o+8*9)($pDst)
-	 mov	$X[3], (+$pDst_o+8*10)($pDst)
-
-	 mov	(+8*6)($pA), %rax
-	 mul	%rax
-
-	 add	$tmp, $X[4]
-	 adc	%rax, $X[5]
-	 adc	\$0, %rdx
-
-	 mov	$X[4], (+$pDst_o+8*11)($pDst)
-	 mov	$X[5], (+$pDst_o+8*12)($pDst)
-
-	 add	%rdx, $x6
-	 adc	$X[7], $x7
-	 adc	\$0, $A
-
-	 mov	$x6, (+$pDst_o+8*13)($pDst)
-	 mov	$x7, (+$pDst_o+8*14)($pDst)
-	 mov	$A, (+$pDst_o+8*15)($pDst)
-___
-}
-
-#
-# sqr_reduce: subroutine to compute Result = reduce(Result * Result)
-#
-# input and result also in: r9, r8, r15, r14, r13, r12, r11, r10
-#
-$code.=<<___;
-.type	sqr_reduce,\@abi-omnipotent
-.align	16
-sqr_reduce:
-	 mov	(+$pResult_offset+8)(%rsp), %rcx
-___
-	&SQR_512("%rsp+$tmp16_offset+8", "%rcx", [map("%r$_",(10..15,8..9))], "%rbx", "%rbp", "%rsi", "%rdi");
-$code.=<<___;
-	# tail recursion optimization: jmp to mont_reduce and return from there
-	 jmp	mont_reduce
-	# call	mont_reduce
-	# ret
-.size	sqr_reduce,.-sqr_reduce
-___
-}}}
-
-#
-# MAIN FUNCTION
-#
-
-#mod_exp_512(UINT64 *result, /* 512 bits, 8 qwords */
-#           UINT64 *g,   /* 512 bits, 8 qwords */
-#           UINT64 *exp, /* 512 bits, 8 qwords */
-#           struct mod_ctx_512 *data)
-
-# window size = 5
-# table size = 2^5 = 32
-#table_entries	equ	32
-#table_size	equ	table_entries * 8
-$code.=<<___;
-.globl	mod_exp_512
-.type	mod_exp_512,\@function,4
-mod_exp_512:
-	 push	%rbp
-	 push	%rbx
-	 push	%r12
-	 push	%r13
-	 push	%r14
-	 push	%r15
-
-	# adjust stack down and then align it with cache boundary
-	 mov	%rsp, %r8
-	 sub	\$$mem_size, %rsp
-	 and	\$-64, %rsp
-
-	# store previous stack pointer and arguments
-	 mov	%r8, (+$rsp_offset)(%rsp)
-	 mov	%rdi, (+$pResult_offset)(%rsp)
-	 mov	%rsi, (+$pG_offset)(%rsp)
-	 mov	%rcx, (+$pData_offset)(%rsp)
-.Lbody:
-	# transform g into montgomery space
-	# GT = reduce(g * C2) = reduce(g * (2^256))
-	# reduce expects to have the input in [tmp16]
-	 pxor	%xmm4, %xmm4
-	 movdqu	(+16*0)(%rsi), %xmm0
-	 movdqu	(+16*1)(%rsi), %xmm1
-	 movdqu	(+16*2)(%rsi), %xmm2
-	 movdqu	(+16*3)(%rsi), %xmm3
-	 movdqa	%xmm4, (+$tmp16_offset+16*0)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*1)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*6)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*7)(%rsp)
-	 movdqa	%xmm0, (+$tmp16_offset+16*2)(%rsp)
-	 movdqa	%xmm1, (+$tmp16_offset+16*3)(%rsp)
-	 movdqa	%xmm2, (+$tmp16_offset+16*4)(%rsp)
-	 movdqa	%xmm3, (+$tmp16_offset+16*5)(%rsp)
-
-	# load pExp before rdx gets blown away
-	 movdqu	(+16*0)(%rdx), %xmm0
-	 movdqu	(+16*1)(%rdx), %xmm1
-	 movdqu	(+16*2)(%rdx), %xmm2
-	 movdqu	(+16*3)(%rdx), %xmm3
-
-	 lea	(+$GT_offset)(%rsp), %rbx
-	 mov	%rbx, (+$red_result_addr_offset)(%rsp)
-	 call	mont_reduce
-
-	# Initialize tmp = C
-	 lea	(+$tmp_offset)(%rsp), %rcx
-	 xor	%rax, %rax
-	 mov	%rax, (+8*0)(%rcx)
-	 mov	%rax, (+8*1)(%rcx)
-	 mov	%rax, (+8*3)(%rcx)
-	 mov	%rax, (+8*4)(%rcx)
-	 mov	%rax, (+8*5)(%rcx)
-	 mov	%rax, (+8*6)(%rcx)
-	 mov	%rax, (+8*7)(%rcx)
-	 mov	%rax, (+$exp_offset+8*8)(%rsp)
-	 movq	\$1, (+8*2)(%rcx)
-
-	 lea	(+$garray_offset)(%rsp), %rbp
-	 mov	%rcx, %rsi			# pTmp
-	 mov	%rbp, %rdi			# Garray[][0]
-___
-
-	&swizzle("%rdi", "%rcx", "%rax", "%rbx");
-
-	# for (rax = 31; rax != 0; rax--) {
-	#     tmp = reduce(tmp * G)
-	#     swizzle(pg, tmp);
-	#     pg += 2; }
-$code.=<<___;
-	 mov	\$31, %rax
-	 mov	%rax, (+$i_offset)(%rsp)
-	 mov	%rbp, (+$pg_offset)(%rsp)
-	# rsi -> pTmp
-	 mov	%rsi, (+$red_result_addr_offset)(%rsp)
-	 mov	(+8*0)(%rsi), %r10
-	 mov	(+8*1)(%rsi), %r11
-	 mov	(+8*2)(%rsi), %r12
-	 mov	(+8*3)(%rsi), %r13
-	 mov	(+8*4)(%rsi), %r14
-	 mov	(+8*5)(%rsi), %r15
-	 mov	(+8*6)(%rsi), %r8
-	 mov	(+8*7)(%rsi), %r9
-init_loop:
-	 lea	(+$GT_offset)(%rsp), %rdi
-	 call	mont_mul_a3b
-	 lea	(+$tmp_offset)(%rsp), %rsi
-	 mov	(+$pg_offset)(%rsp), %rbp
-	 add	\$2, %rbp
-	 mov	%rbp, (+$pg_offset)(%rsp)
-	 mov	%rsi, %rcx			# rcx = rsi = addr of tmp
-___
-
-	&swizzle("%rbp", "%rcx", "%rax", "%rbx");
-$code.=<<___;
-	 mov	(+$i_offset)(%rsp), %rax
-	 sub	\$1, %rax
-	 mov	%rax, (+$i_offset)(%rsp)
-	 jne	init_loop
-
-	#
-	# Copy exponent onto stack
-	 movdqa	%xmm0, (+$exp_offset+16*0)(%rsp)
-	 movdqa	%xmm1, (+$exp_offset+16*1)(%rsp)
-	 movdqa	%xmm2, (+$exp_offset+16*2)(%rsp)
-	 movdqa	%xmm3, (+$exp_offset+16*3)(%rsp)
-
-
-	#
-	# Do exponentiation
-	# Initialize result to G[exp{511:507}]
-	 mov	(+$exp_offset+62)(%rsp), %eax
-	 mov	%rax, %rdx
-	 shr	\$11, %rax
-	 and	\$0x07FF, %edx
-	 mov	%edx, (+$exp_offset+62)(%rsp)
-	 lea	(+$garray_offset)(%rsp,%rax,2), %rsi
-	 mov	(+$pResult_offset)(%rsp), %rdx
-___
-
-	&unswizzle("%rdx", "%rsi", "%rbp", "%rbx", "%rax");
-
-	#
-	# Loop variables
-	# rcx = [loop_idx] = index: 510-5 to 0 by 5
-$code.=<<___;
-	 movq	\$505, (+$loop_idx_offset)(%rsp)
-
-	 mov	(+$pResult_offset)(%rsp), %rcx
-	 mov	%rcx, (+$red_result_addr_offset)(%rsp)
-	 mov	(+8*0)(%rcx), %r10
-	 mov	(+8*1)(%rcx), %r11
-	 mov	(+8*2)(%rcx), %r12
-	 mov	(+8*3)(%rcx), %r13
-	 mov	(+8*4)(%rcx), %r14
-	 mov	(+8*5)(%rcx), %r15
-	 mov	(+8*6)(%rcx), %r8
-	 mov	(+8*7)(%rcx), %r9
-	 jmp	sqr_2
-
-main_loop_a3b:
-	 call	sqr_reduce
-	 call	sqr_reduce
-	 call	sqr_reduce
-sqr_2:
-	 call	sqr_reduce
-	 call	sqr_reduce
-
-	#
-	# Do multiply, first look up proper value in Garray
-	 mov	(+$loop_idx_offset)(%rsp), %rcx			# bit index
-	 mov	%rcx, %rax
-	 shr	\$4, %rax			# rax is word pointer
-	 mov	(+$exp_offset)(%rsp,%rax,2), %edx
-	 and	\$15, %rcx
-	 shrq	%cl, %rdx
-	 and	\$0x1F, %rdx
-
-	 lea	(+$garray_offset)(%rsp,%rdx,2), %rsi
-	 lea	(+$tmp_offset)(%rsp), %rdx
-	 mov	%rdx, %rdi
-___
-
-	&unswizzle("%rdx", "%rsi", "%rbp", "%rbx", "%rax");
-	# rdi = tmp = pG
-
-	#
-	# Call mod_mul_a1(pDst,  pSrc1, pSrc2, pM, pData)
-	#                 result result pG     M   Data
-$code.=<<___;
-	 mov	(+$pResult_offset)(%rsp), %rsi
-	 call	mont_mul_a3b
-
-	#
-	# finish loop
-	 mov	(+$loop_idx_offset)(%rsp), %rcx
-	 sub	\$5, %rcx
-	 mov	%rcx, (+$loop_idx_offset)(%rsp)
-	 jge	main_loop_a3b
-
-	#
-
-end_main_loop_a3b:
-	# transform result out of Montgomery space
-	# result = reduce(result)
-	 mov	(+$pResult_offset)(%rsp), %rdx
-	 pxor	%xmm4, %xmm4
-	 movdqu	(+16*0)(%rdx), %xmm0
-	 movdqu	(+16*1)(%rdx), %xmm1
-	 movdqu	(+16*2)(%rdx), %xmm2
-	 movdqu	(+16*3)(%rdx), %xmm3
-	 movdqa	%xmm4, (+$tmp16_offset+16*4)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*5)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*6)(%rsp)
-	 movdqa	%xmm4, (+$tmp16_offset+16*7)(%rsp)
-	 movdqa	%xmm0, (+$tmp16_offset+16*0)(%rsp)
-	 movdqa	%xmm1, (+$tmp16_offset+16*1)(%rsp)
-	 movdqa	%xmm2, (+$tmp16_offset+16*2)(%rsp)
-	 movdqa	%xmm3, (+$tmp16_offset+16*3)(%rsp)
-	 call	mont_reduce
-
-	# If result > m, subract m
-	# load result into r15:r8
-	 mov	(+$pResult_offset)(%rsp), %rax
-	 mov	(+8*0)(%rax), %r8
-	 mov	(+8*1)(%rax), %r9
-	 mov	(+8*2)(%rax), %r10
-	 mov	(+8*3)(%rax), %r11
-	 mov	(+8*4)(%rax), %r12
-	 mov	(+8*5)(%rax), %r13
-	 mov	(+8*6)(%rax), %r14
-	 mov	(+8*7)(%rax), %r15
-
-	# subtract m
-	 mov	(+$pData_offset)(%rsp), %rbx
-	 add	\$$M, %rbx
-
-	 sub	(+8*0)(%rbx), %r8
-	 sbb	(+8*1)(%rbx), %r9
-	 sbb	(+8*2)(%rbx), %r10
-	 sbb	(+8*3)(%rbx), %r11
-	 sbb	(+8*4)(%rbx), %r12
-	 sbb	(+8*5)(%rbx), %r13
-	 sbb	(+8*6)(%rbx), %r14
-	 sbb	(+8*7)(%rbx), %r15
-
-	# if Carry is clear, replace result with difference
-	 mov	(+8*0)(%rax), %rsi
-	 mov	(+8*1)(%rax), %rdi
-	 mov	(+8*2)(%rax), %rcx
-	 mov	(+8*3)(%rax), %rdx
-	 cmovnc	%r8, %rsi
-	 cmovnc	%r9, %rdi
-	 cmovnc	%r10, %rcx
-	 cmovnc	%r11, %rdx
-	 mov	%rsi, (+8*0)(%rax)
-	 mov	%rdi, (+8*1)(%rax)
-	 mov	%rcx, (+8*2)(%rax)
-	 mov	%rdx, (+8*3)(%rax)
-
-	 mov	(+8*4)(%rax), %rsi
-	 mov	(+8*5)(%rax), %rdi
-	 mov	(+8*6)(%rax), %rcx
-	 mov	(+8*7)(%rax), %rdx
-	 cmovnc	%r12, %rsi
-	 cmovnc	%r13, %rdi
-	 cmovnc	%r14, %rcx
-	 cmovnc	%r15, %rdx
-	 mov	%rsi, (+8*4)(%rax)
-	 mov	%rdi, (+8*5)(%rax)
-	 mov	%rcx, (+8*6)(%rax)
-	 mov	%rdx, (+8*7)(%rax)
-
-	 mov	(+$rsp_offset)(%rsp), %rsi
-	 mov	0(%rsi),%r15
-	 mov	8(%rsi),%r14
-	 mov	16(%rsi),%r13
-	 mov	24(%rsi),%r12
-	 mov	32(%rsi),%rbx
-	 mov	40(%rsi),%rbp
-	 lea	48(%rsi),%rsp
-.Lepilogue:
-	 ret
-.size mod_exp_512, . - mod_exp_512
-___
-
-if ($win64) {
-# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
-#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
-my $rec="%rcx";
-my $frame="%rdx";
-my $context="%r8";
-my $disp="%r9";
-
-$code.=<<___;
-.extern	__imp_RtlVirtualUnwind
-.type	mod_exp_512_se_handler,\@abi-omnipotent
-.align	16
-mod_exp_512_se_handler:
-	push	%rsi
-	push	%rdi
-	push	%rbx
-	push	%rbp
-	push	%r12
-	push	%r13
-	push	%r14
-	push	%r15
-	pushfq
-	sub	\$64,%rsp
-
-	mov	120($context),%rax	# pull context->Rax
-	mov	248($context),%rbx	# pull context->Rip
-
-	lea	.Lbody(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip<prologue label
-	jb	.Lin_prologue
-
-	mov	152($context),%rax	# pull context->Rsp
-
-	lea	.Lepilogue(%rip),%r10
-	cmp	%r10,%rbx		# context->Rip>=epilogue label
-	jae	.Lin_prologue
-
-	mov	$rsp_offset(%rax),%rax	# pull saved Rsp
-
-	mov	32(%rax),%rbx
-	mov	40(%rax),%rbp
-	mov	24(%rax),%r12
-	mov	16(%rax),%r13
-	mov	8(%rax),%r14
-	mov	0(%rax),%r15
-	lea	48(%rax),%rax
-	mov	%rbx,144($context)	# restore context->Rbx
-	mov	%rbp,160($context)	# restore context->Rbp
-	mov	%r12,216($context)	# restore context->R12
-	mov	%r13,224($context)	# restore context->R13
-	mov	%r14,232($context)	# restore context->R14
-	mov	%r15,240($context)	# restore context->R15
-
-.Lin_prologue:
-	mov	8(%rax),%rdi
-	mov	16(%rax),%rsi
-	mov	%rax,152($context)	# restore context->Rsp
-	mov	%rsi,168($context)	# restore context->Rsi
-	mov	%rdi,176($context)	# restore context->Rdi
-
-	mov	40($disp),%rdi		# disp->ContextRecord
-	mov	$context,%rsi		# context
-	mov	\$154,%ecx		# sizeof(CONTEXT)
-	.long	0xa548f3fc		# cld; rep movsq
-
-	mov	$disp,%rsi
-	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
-	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
-	mov	0(%rsi),%r8		# arg3, disp->ControlPc
-	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
-	mov	40(%rsi),%r10		# disp->ContextRecord
-	lea	56(%rsi),%r11		# &disp->HandlerData
-	lea	24(%rsi),%r12		# &disp->EstablisherFrame
-	mov	%r10,32(%rsp)		# arg5
-	mov	%r11,40(%rsp)		# arg6
-	mov	%r12,48(%rsp)		# arg7
-	mov	%rcx,56(%rsp)		# arg8, (NULL)
-	call	*__imp_RtlVirtualUnwind(%rip)
-
-	mov	\$1,%eax		# ExceptionContinueSearch
-	add	\$64,%rsp
-	popfq
-	pop	%r15
-	pop	%r14
-	pop	%r13
-	pop	%r12
-	pop	%rbp
-	pop	%rbx
-	pop	%rdi
-	pop	%rsi
-	ret
-.size	mod_exp_512_se_handler,.-mod_exp_512_se_handler
-
-.section	.pdata
-.align	4
-	.rva	.LSEH_begin_mod_exp_512
-	.rva	.LSEH_end_mod_exp_512
-	.rva	.LSEH_info_mod_exp_512
-
-.section	.xdata
-.align	8
-.LSEH_info_mod_exp_512:
-	.byte	9,0,0,0
-	.rva	mod_exp_512_se_handler
-___
-}
-
-sub reg_part {
-my ($reg,$conv)=@_;
-    if ($reg =~ /%r[0-9]+/)	{ $reg .= $conv; }
-    elsif ($conv eq "b")	{ $reg =~ s/%[er]([^x]+)x?/%$1l/;	}
-    elsif ($conv eq "w")	{ $reg =~ s/%[er](.+)/%$1/;		}
-    elsif ($conv eq "d")	{ $reg =~ s/%[er](.+)/%e$1/;		}
-    return $reg;
-}
-
-$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/(\(\+[^)]+\))/eval $1/gem;
-print $code;
-close STDOUT;
diff --git a/openssl/crypto/bn/bn_exp.c b/openssl/crypto/bn/bn_exp.c
index 28a9fd53b..8c46e50bd 100644
--- a/openssl/crypto/bn/bn_exp.c
+++ b/openssl/crypto/bn/bn_exp.c
@@ -185,10 +185,10 @@ int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
                 goto err;
         }
     }
-    ret = 1;
- err:
     if (r != rr)
         BN_copy(r, rr);
+    ret = 1;
+ err:
     BN_CTX_end(ctx);
     bn_check_top(r);
     return (ret);