Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

2 files changed, 2218 insertions, 0 deletions

diff --git a/openssl/crypto/camellia/asm/cmll-x86.pl b/openssl/crypto/camellia/asm/cmll-x86.pl
new file mode 100644
index 000000000..0812815bf
--- /dev/null
+++ b/openssl/crypto/camellia/asm/cmll-x86.pl
@@ -0,0 +1,1138 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Copyright (c) 2008 Andy Polyakov <appro@openssl.org>
+#
+# This module may be used under the terms of either the GNU General
+# Public License version 2 or later, the GNU Lesser General Public
+# License version 2.1 or later, the Mozilla Public License version
+# 1.1 or the BSD License. The exact terms of either license are
+# distributed along with this module. For further details see
+# http://www.openssl.org/~appro/camellia/.
+# ====================================================================
+
+# Performance in cycles per processed byte (less is better) in
+# 'openssl speed ...' benchmark:
+#
+#			AMD K8	Core2	PIII	P4
+# -evp camellia-128-ecb	21.5	22.8	27.0	28.9
+# + over gcc 3.4.6	+90/11% +70/10%	+53/4%	+160/64%
+# + over icc 8.0	+48/19% +21/15%	+21/17%	+55/37%
+#
+# camellia-128-cbc	17.3	21.1	23.9	25.9
+#
+# 128-bit key setup	196	280	256	240	cycles/key
+# + over gcc 3.4.6	+30/0%	+17/11%	+11/0%	+63/40%
+# + over icc 8.0	+18/3%	+10/0%	+10/3%	+21/10%
+#
+# Pairs of numbers in "+" rows represent performance improvement over
+# compiler generated position-independent code, PIC, and non-PIC
+# respectively. PIC results are of greater relevance, as this module
+# is position-independent, i.e. suitable for a shared library or PIE.
+# Position independence "costs" one register, which is why compilers
+# are so close with non-PIC results, they have an extra register to
+# spare. CBC results are better than ECB ones thanks to "zero-copy"
+# private _x86_* interface, and are ~30-40% better than with compiler
+# generated cmll_cbc.o, and reach ~80-90% of x86_64 performance on
+# same CPU (where applicable).
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
+require "x86asm.pl";
+
+$OPENSSL=1;
+
+&asm_init($ARGV[0],"cmll-586.pl",$ARGV[$#ARGV] eq "386");
+
+@T=("eax","ebx","ecx","edx");
+$idx="esi";
+$key="edi";
+$Tbl="ebp";
+
+# stack frame layout in _x86_Camellia_* routines, frame is allocated
+# by caller
+$__ra=&DWP(0,"esp");	# return address
+$__s0=&DWP(4,"esp");	# s0 backing store
+$__s1=&DWP(8,"esp");	# s1 backing store
+$__s2=&DWP(12,"esp");	# s2 backing store
+$__s3=&DWP(16,"esp");	# s3 backing store
+$__end=&DWP(20,"esp");	# pointer to end/start of key schedule
+
+# stack frame layout in Camellia_[en|crypt] routines, which differs from
+# above by 4 and overlaps by pointer to end/start of key schedule
+$_end=&DWP(16,"esp");
+$_esp=&DWP(20,"esp");
+
+# const unsigned int Camellia_SBOX[4][256];
+# Well, sort of... Camellia_SBOX[0][] is interleaved with [1][],
+# and [2][] - with [3][]. This is done to optimize code size.
+$SBOX1_1110=0;		# Camellia_SBOX[0]
+$SBOX4_4404=4;		# Camellia_SBOX[1]
+$SBOX2_0222=2048;	# Camellia_SBOX[2]
+$SBOX3_3033=2052;	# Camellia_SBOX[3]
+&static_label("Camellia_SIGMA");
+&static_label("Camellia_SBOX");
+
+sub Camellia_Feistel {
+my $i=@_[0];
+my $seed=defined(@_[1])?@_[1]:0;
+my $scale=$seed<0?-8:8;
+my $frame=defined(@_[2])?@_[2]:0;
+my $j=($i&1)*2;
+my $t0=@T[($j)%4],$t1=@T[($j+1)%4],$t2=@T[($j+2)%4],$t3=@T[($j+3)%4];
+
+	&xor	($t0,$idx);				# t0^=key[0]
+	&xor	($t1,&DWP($seed+$i*$scale+4,$key));	# t1^=key[1]
+	&movz	($idx,&HB($t0));			# (t0>>8)&0xff
+	&mov	($t3,&DWP($SBOX3_3033,$Tbl,$idx,8));	# t3=SBOX3_3033[0]
+	&movz	($idx,&LB($t0));			# (t0>>0)&0xff
+	&xor	($t3,&DWP($SBOX4_4404,$Tbl,$idx,8));	# t3^=SBOX4_4404[0]
+	&shr	($t0,16);
+	&movz	($idx,&LB($t1));			# (t1>>0)&0xff
+	&mov	($t2,&DWP($SBOX1_1110,$Tbl,$idx,8));	# t2=SBOX1_1110[1]
+	&movz	($idx,&HB($t0));			# (t0>>24)&0xff
+	&xor	($t3,&DWP($SBOX1_1110,$Tbl,$idx,8));	# t3^=SBOX1_1110[0]
+	&movz	($idx,&HB($t1));			# (t1>>8)&0xff
+	&xor	($t2,&DWP($SBOX4_4404,$Tbl,$idx,8));	# t2^=SBOX4_4404[1]
+	&shr	($t1,16);
+	&movz	($t0,&LB($t0));				# (t0>>16)&0xff
+	&xor	($t3,&DWP($SBOX2_0222,$Tbl,$t0,8));	# t3^=SBOX2_0222[0]
+	&movz	($idx,&HB($t1));			# (t1>>24)&0xff
+	&mov	($t0,&DWP($frame+4*(($j+3)%4),"esp"));	# prefetch "s3"
+	&xor	($t2,$t3);				# t2^=t3
+	&rotr	($t3,8);				# t3=RightRotate(t3,8)
+	&xor	($t2,&DWP($SBOX2_0222,$Tbl,$idx,8));	# t2^=SBOX2_0222[1]
+	&movz	($idx,&LB($t1));			# (t1>>16)&0xff
+	&mov	($t1,&DWP($frame+4*(($j+2)%4),"esp"));	# prefetch "s2"
+	&xor	($t3,$t0);				# t3^=s3
+	&xor	($t2,&DWP($SBOX3_3033,$Tbl,$idx,8));	# t2^=SBOX3_3033[1]
+	&mov	($idx,&DWP($seed+($i+1)*$scale,$key));	# prefetch key[i+1]
+	&xor	($t3,$t2);				# t3^=t2
+	&mov	(&DWP($frame+4*(($j+3)%4),"esp"),$t3);	# s3=t3
+	&xor	($t2,$t1);				# t2^=s2
+	&mov	(&DWP($frame+4*(($j+2)%4),"esp"),$t2);	# s2=t2
+}
+
+# void Camellia_EncryptBlock_Rounds(
+#		int grandRounds,
+#		const Byte plaintext[],
+#		const KEY_TABLE_TYPE keyTable,
+#		Byte ciphertext[])
+&function_begin("Camellia_EncryptBlock_Rounds");
+	&mov	("eax",&wparam(0));	# load grandRounds
+	&mov	($idx,&wparam(1));	# load plaintext pointer
+	&mov	($key,&wparam(2));	# load key schedule pointer
+
+	&mov	("ebx","esp");
+	&sub	("esp",7*4);		# place for s[0-3],keyEnd,esp and ra
+	&and	("esp",-64);
+
+	# place stack frame just "above mod 1024" the key schedule
+	# this ensures that cache associativity of 2 suffices
+	&lea	("ecx",&DWP(-64-63,$key));
+	&sub	("ecx","esp");
+	&neg	("ecx");
+	&and	("ecx",0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp","ecx");
+	&add	("esp",4);	# 4 is reserved for callee's return address
+
+	&shl	("eax",6);
+	&lea	("eax",&DWP(0,$key,"eax"));
+	&mov	($_esp,"ebx");	# save %esp
+	&mov	($_end,"eax");	# save keyEnd
+
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea	($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+
+	&mov	(@T[0],&DWP(0,$idx));	# load plaintext
+	&mov	(@T[1],&DWP(4,$idx));
+	&mov	(@T[2],&DWP(8,$idx));
+	&bswap	(@T[0]);
+	&mov	(@T[3],&DWP(12,$idx));
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&call	("_x86_Camellia_encrypt");
+
+	&mov	("esp",$_esp);
+	&bswap	(@T[0]);
+	&mov	($idx,&wparam(3));	# load ciphertext pointer
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+	&mov	(&DWP(0,$idx),@T[0]);	# write ciphertext
+	&mov	(&DWP(4,$idx),@T[1]);
+	&mov	(&DWP(8,$idx),@T[2]);
+	&mov	(&DWP(12,$idx),@T[3]);
+&function_end("Camellia_EncryptBlock_Rounds");
+# V1.x API
+&function_begin_B("Camellia_EncryptBlock");
+	&mov	("eax",128);
+	&sub	("eax",&wparam(0));	# load keyBitLength
+	&mov	("eax",3);
+	&adc	("eax",0);		# keyBitLength==128?3:4
+	&mov	(&wparam(0),"eax");
+	&jmp	(&label("Camellia_EncryptBlock_Rounds"));
+&function_end_B("Camellia_EncryptBlock");
+
+if ($OPENSSL) {
+# void Camellia_encrypt(
+#		const unsigned char *in,
+#		unsigned char *out,
+#		const CAMELLIA_KEY *key)
+&function_begin("Camellia_encrypt");
+	&mov	($idx,&wparam(0));	# load plaintext pointer
+	&mov	($key,&wparam(2));	# load key schedule pointer
+
+	&mov	("ebx","esp");
+	&sub	("esp",7*4);		# place for s[0-3],keyEnd,esp and ra
+	&and	("esp",-64);
+	&mov	("eax",&DWP(272,$key));	# load grandRounds counter
+
+	# place stack frame just "above mod 1024" the key schedule
+	# this ensures that cache associativity of 2 suffices
+	&lea	("ecx",&DWP(-64-63,$key));
+	&sub	("ecx","esp");
+	&neg	("ecx");
+	&and	("ecx",0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp","ecx");
+	&add	("esp",4);	# 4 is reserved for callee's return address
+
+	&shl	("eax",6);
+	&lea	("eax",&DWP(0,$key,"eax"));
+	&mov	($_esp,"ebx");	# save %esp
+	&mov	($_end,"eax");	# save keyEnd
+
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea	($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+
+	&mov	(@T[0],&DWP(0,$idx));	# load plaintext
+	&mov	(@T[1],&DWP(4,$idx));
+	&mov	(@T[2],&DWP(8,$idx));
+	&bswap	(@T[0]);
+	&mov	(@T[3],&DWP(12,$idx));
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&call	("_x86_Camellia_encrypt");
+
+	&mov	("esp",$_esp);
+	&bswap	(@T[0]);
+	&mov	($idx,&wparam(1));	# load ciphertext pointer
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+	&mov	(&DWP(0,$idx),@T[0]);	# write ciphertext
+	&mov	(&DWP(4,$idx),@T[1]);
+	&mov	(&DWP(8,$idx),@T[2]);
+	&mov	(&DWP(12,$idx),@T[3]);
+&function_end("Camellia_encrypt");
+}
+
+&function_begin_B("_x86_Camellia_encrypt");
+	&xor	(@T[0],&DWP(0,$key));	# ^=key[0-3]
+	&xor	(@T[1],&DWP(4,$key));
+	&xor	(@T[2],&DWP(8,$key));
+	&xor	(@T[3],&DWP(12,$key));
+	&mov	($idx,&DWP(16,$key));	# prefetch key[4]
+
+	&mov	($__s0,@T[0]);		# save s[0-3]
+	&mov	($__s1,@T[1]);
+	&mov	($__s2,@T[2]);
+	&mov	($__s3,@T[3]);
+
+&set_label("loop",16);
+	for ($i=0;$i<6;$i++) { Camellia_Feistel($i,16,4); }
+
+	&add	($key,16*4);
+	&cmp	($key,$__end);
+	&je	(&label("done"));
+
+	# @T[0-1] are preloaded, $idx is preloaded with key[0]
+	&and	($idx,@T[0]);
+	 &mov	 (@T[3],$__s3);
+	&rotl	($idx,1);
+	 &mov	 (@T[2],@T[3]);
+	&xor	(@T[1],$idx);
+	 &or	 (@T[2],&DWP(12,$key));
+	&mov	($__s1,@T[1]);		# s1^=LeftRotate(s0&key[0],1);
+	 &xor	 (@T[2],$__s2);
+
+	&mov	($idx,&DWP(4,$key));
+	 &mov	 ($__s2,@T[2]);		# s2^=s3|key[3];
+	&or	($idx,@T[1]);
+	 &and	 (@T[2],&DWP(8,$key));
+	&xor	(@T[0],$idx);
+	 &rotl	 (@T[2],1);
+	&mov	($__s0,@T[0]);		# s0^=s1|key[1];
+	 &xor	 (@T[3],@T[2]);
+	&mov	($idx,&DWP(16,$key));		# prefetch key[4]
+	 &mov	 ($__s3,@T[3]);		# s3^=LeftRotate(s2&key[2],1);
+	&jmp	(&label("loop"));
+
+&set_label("done",8);
+	&mov	(@T[2],@T[0]);		# SwapHalf
+	&mov	(@T[3],@T[1]);
+	&mov	(@T[0],$__s2);
+	&mov	(@T[1],$__s3);
+	&xor	(@T[0],$idx);		# $idx is preloaded with key[0]
+	&xor	(@T[1],&DWP(4,$key));
+	&xor	(@T[2],&DWP(8,$key));
+	&xor	(@T[3],&DWP(12,$key));
+	&ret	();
+&function_end_B("_x86_Camellia_encrypt");
+
+# void Camellia_DecryptBlock_Rounds(
+#		int grandRounds,
+#		const Byte ciphertext[],
+#		const KEY_TABLE_TYPE keyTable,
+#		Byte plaintext[])
+&function_begin("Camellia_DecryptBlock_Rounds");
+	&mov	("eax",&wparam(0));	# load grandRounds
+	&mov	($idx,&wparam(1));	# load ciphertext pointer
+	&mov	($key,&wparam(2));	# load key schedule pointer
+
+	&mov	("ebx","esp");
+	&sub	("esp",7*4);		# place for s[0-3],keyEnd,esp and ra
+	&and	("esp",-64);
+
+	# place stack frame just "above mod 1024" the key schedule
+	# this ensures that cache associativity of 2 suffices
+	&lea	("ecx",&DWP(-64-63,$key));
+	&sub	("ecx","esp");
+	&neg	("ecx");
+	&and	("ecx",0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp","ecx");
+	&add	("esp",4);	# 4 is reserved for callee's return address
+
+	&shl	("eax",6);
+	&mov	(&DWP(4*4,"esp"),$key);	# save keyStart
+	&lea	($key,&DWP(0,$key,"eax"));
+	&mov	(&DWP(5*4,"esp"),"ebx");# save %esp
+
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea	($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+
+	&mov	(@T[0],&DWP(0,$idx));	# load ciphertext
+	&mov	(@T[1],&DWP(4,$idx));
+	&mov	(@T[2],&DWP(8,$idx));
+	&bswap	(@T[0]);
+	&mov	(@T[3],&DWP(12,$idx));
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&call	("_x86_Camellia_decrypt");
+
+	&mov	("esp",&DWP(5*4,"esp"));
+	&bswap	(@T[0]);
+	&mov	($idx,&wparam(3));	# load plaintext pointer
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+	&mov	(&DWP(0,$idx),@T[0]);	# write plaintext
+	&mov	(&DWP(4,$idx),@T[1]);
+	&mov	(&DWP(8,$idx),@T[2]);
+	&mov	(&DWP(12,$idx),@T[3]);
+&function_end("Camellia_DecryptBlock_Rounds");
+# V1.x API
+&function_begin_B("Camellia_DecryptBlock");
+	&mov	("eax",128);
+	&sub	("eax",&wparam(0));	# load keyBitLength
+	&mov	("eax",3);
+	&adc	("eax",0);		# keyBitLength==128?3:4
+	&mov	(&wparam(0),"eax");
+	&jmp	(&label("Camellia_DecryptBlock_Rounds"));
+&function_end_B("Camellia_DecryptBlock");
+
+if ($OPENSSL) {
+# void Camellia_decrypt(
+#		const unsigned char *in,
+#		unsigned char *out,
+#		const CAMELLIA_KEY *key)
+&function_begin("Camellia_decrypt");
+	&mov	($idx,&wparam(0));	# load ciphertext pointer
+	&mov	($key,&wparam(2));	# load key schedule pointer
+
+	&mov	("ebx","esp");
+	&sub	("esp",7*4);		# place for s[0-3],keyEnd,esp and ra
+	&and	("esp",-64);
+	&mov	("eax",&DWP(272,$key));	# load grandRounds counter
+
+	# place stack frame just "above mod 1024" the key schedule
+	# this ensures that cache associativity of 2 suffices
+	&lea	("ecx",&DWP(-64-63,$key));
+	&sub	("ecx","esp");
+	&neg	("ecx");
+	&and	("ecx",0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	("esp","ecx");
+	&add	("esp",4);	# 4 is reserved for callee's return address
+
+	&shl	("eax",6);
+	&mov	(&DWP(4*4,"esp"),$key);	# save keyStart
+	&lea	($key,&DWP(0,$key,"eax"));
+	&mov	(&DWP(5*4,"esp"),"ebx");# save %esp
+
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea	($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+
+	&mov	(@T[0],&DWP(0,$idx));	# load ciphertext
+	&mov	(@T[1],&DWP(4,$idx));
+	&mov	(@T[2],&DWP(8,$idx));
+	&bswap	(@T[0]);
+	&mov	(@T[3],&DWP(12,$idx));
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&call	("_x86_Camellia_decrypt");
+
+	&mov	("esp",&DWP(5*4,"esp"));
+	&bswap	(@T[0]);
+	&mov	($idx,&wparam(1));	# load plaintext pointer
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+	&mov	(&DWP(0,$idx),@T[0]);	# write plaintext
+	&mov	(&DWP(4,$idx),@T[1]);
+	&mov	(&DWP(8,$idx),@T[2]);
+	&mov	(&DWP(12,$idx),@T[3]);
+&function_end("Camellia_decrypt");
+}
+
+&function_begin_B("_x86_Camellia_decrypt");
+	&xor	(@T[0],&DWP(0,$key));	# ^=key[0-3]
+	&xor	(@T[1],&DWP(4,$key));
+	&xor	(@T[2],&DWP(8,$key));
+	&xor	(@T[3],&DWP(12,$key));
+	&mov	($idx,&DWP(-8,$key));	# prefetch key[-2]
+
+	&mov	($__s0,@T[0]);		# save s[0-3]
+	&mov	($__s1,@T[1]);
+	&mov	($__s2,@T[2]);
+	&mov	($__s3,@T[3]);
+
+&set_label("loop",16);
+	for ($i=0;$i<6;$i++) { Camellia_Feistel($i,-8,4); }
+
+	&sub	($key,16*4);
+	&cmp	($key,$__end);
+	&je	(&label("done"));
+
+	# @T[0-1] are preloaded, $idx is preloaded with key[2]
+	&and	($idx,@T[0]);
+	 &mov	 (@T[3],$__s3);
+	&rotl	($idx,1);
+	 &mov	 (@T[2],@T[3]);
+	&xor	(@T[1],$idx);
+	 &or	 (@T[2],&DWP(4,$key));
+	&mov	($__s1,@T[1]);		# s1^=LeftRotate(s0&key[0],1);
+	 &xor	 (@T[2],$__s2);
+
+	&mov	($idx,&DWP(12,$key));
+	 &mov	 ($__s2,@T[2]);		# s2^=s3|key[3];
+	&or	($idx,@T[1]);
+	 &and	 (@T[2],&DWP(0,$key));
+	&xor	(@T[0],$idx);
+	 &rotl	 (@T[2],1);
+	&mov	($__s0,@T[0]);		# s0^=s1|key[1];
+	 &xor	 (@T[3],@T[2]);
+	&mov	($idx,&DWP(-8,$key));	# prefetch key[4]
+	 &mov	 ($__s3,@T[3]);		# s3^=LeftRotate(s2&key[2],1);
+	&jmp	(&label("loop"));
+
+&set_label("done",8);
+	&mov	(@T[2],@T[0]);		# SwapHalf
+	&mov	(@T[3],@T[1]);
+	&mov	(@T[0],$__s2);
+	&mov	(@T[1],$__s3);
+	&xor	(@T[2],$idx);		# $idx is preloaded with key[2]
+	&xor	(@T[3],&DWP(12,$key));
+	&xor	(@T[0],&DWP(0,$key));
+	&xor	(@T[1],&DWP(4,$key));
+	&ret	();
+&function_end_B("_x86_Camellia_decrypt");
+
+# shld is very slow on Intel P4 family. Even on AMD it limits
+# instruction decode rate [because it's VectorPath] and consequently
+# performance. PIII, PM and Core[2] seem to be the only ones which
+# execute this code ~7% faster...
+sub __rotl128 {
+  my ($i0,$i1,$i2,$i3,$rot,$rnd,@T)=@_;
+
+    $rnd *= 2;
+    if ($rot) {
+	&mov	($idx,$i0);
+	&shld	($i0,$i1,$rot);
+	&shld	($i1,$i2,$rot);
+	&shld	($i2,$i3,$rot);
+	&shld	($i3,$idx,$rot);
+    }
+    &mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i0 eq @T[0]);
+    &mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i1 eq @T[0]);
+    &mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i2 eq @T[0]);
+    &mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i3 eq @T[0]);
+}
+
+# ... Implementing 128-bit rotate without shld gives >3x performance
+# improvement on P4, only ~7% degradation on other Intel CPUs and
+# not worse performance on AMD. This is therefore preferred.
+sub _rotl128 {
+  my ($i0,$i1,$i2,$i3,$rot,$rnd,@T)=@_;
+
+    $rnd *= 2;
+    if ($rot) {
+	&mov	($Tbl,$i0);
+	&shl	($i0,$rot);
+	&mov	($idx,$i1);
+	&shr	($idx,32-$rot);
+	&shl	($i1,$rot);
+	&or	($i0,$idx);
+	&mov	($idx,$i2);
+	&shl	($i2,$rot);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i0 eq @T[0]);
+	&shr	($idx,32-$rot);
+	&or	($i1,$idx);
+	&shr	($Tbl,32-$rot);
+	&mov	($idx,$i3);
+	&shr	($idx,32-$rot);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i1 eq @T[0]);
+	&shl	($i3,$rot);
+	&or	($i2,$idx);
+	&or	($i3,$Tbl);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i2 eq @T[0]);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i3 eq @T[0]);
+    } else {
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i0 eq @T[0]);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i1 eq @T[0]);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i2 eq @T[0]);
+	&mov	(&DWP(-128+4*$rnd++,$key),shift(@T))	if ($i3 eq @T[0]);
+    }
+}
+
+sub _saveround {
+my ($rnd,$key,@T)=@_;
+my $bias=int(@T[0])?shift(@T):0;
+
+	&mov	(&DWP($bias+$rnd*8+0,$key),@T[0]);
+	&mov	(&DWP($bias+$rnd*8+4,$key),@T[1])	if ($#T>=1);
+	&mov	(&DWP($bias+$rnd*8+8,$key),@T[2])	if ($#T>=2);
+	&mov	(&DWP($bias+$rnd*8+12,$key),@T[3])	if ($#T>=3);
+}
+
+sub _loadround {
+my ($rnd,$key,@T)=@_;
+my $bias=int(@T[0])?shift(@T):0;
+
+	&mov	(@T[0],&DWP($bias+$rnd*8+0,$key));
+	&mov	(@T[1],&DWP($bias+$rnd*8+4,$key))	if ($#T>=1);
+	&mov	(@T[2],&DWP($bias+$rnd*8+8,$key))	if ($#T>=2);
+	&mov	(@T[3],&DWP($bias+$rnd*8+12,$key))	if ($#T>=3);
+}
+
+# void Camellia_Ekeygen(
+#		const int keyBitLength,
+#		const Byte *rawKey,
+#		KEY_TABLE_TYPE keyTable)
+&function_begin("Camellia_Ekeygen");
+{ my $step=0;
+
+	&stack_push(4);				# place for s[0-3]
+
+	&mov	($Tbl,&wparam(0));		# load arguments
+	&mov	($idx,&wparam(1));
+	&mov	($key,&wparam(2));
+
+	&mov	(@T[0],&DWP(0,$idx));		# load 0-127 bits
+	&mov	(@T[1],&DWP(4,$idx));
+	&mov	(@T[2],&DWP(8,$idx));
+	&mov	(@T[3],&DWP(12,$idx));
+
+	&bswap	(@T[0]);
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&_saveround	(0,$key,@T);		# KL<<<0
+
+	&cmp	($Tbl,128);
+	&je	(&label("1st128"));
+
+	&mov	(@T[0],&DWP(16,$idx));		# load 128-191 bits
+	&mov	(@T[1],&DWP(20,$idx));
+	&cmp	($Tbl,192);
+	&je	(&label("1st192"));
+	&mov	(@T[2],&DWP(24,$idx));		# load 192-255 bits
+	&mov	(@T[3],&DWP(28,$idx));
+	&jmp	(&label("1st256"));
+&set_label("1st192",4);
+	&mov	(@T[2],@T[0]);
+	&mov	(@T[3],@T[1]);
+	&not	(@T[2]);
+	&not	(@T[3]);
+&set_label("1st256",4);
+	&bswap	(@T[0]);
+	&bswap	(@T[1]);
+	&bswap	(@T[2]);
+	&bswap	(@T[3]);
+
+	&_saveround	(4,$key,@T);		# temporary storage for KR!
+
+	&xor	(@T[0],&DWP(0*8+0,$key));	# KR^KL
+	&xor	(@T[1],&DWP(0*8+4,$key));
+	&xor	(@T[2],&DWP(1*8+0,$key));
+	&xor	(@T[3],&DWP(1*8+4,$key));
+
+&set_label("1st128",4);
+	&call	(&label("pic_point"));
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea	($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+	&lea	($key,&DWP(&label("Camellia_SIGMA")."-".&label("Camellia_SBOX"),$Tbl));
+
+	&mov	($idx,&DWP($step*8,$key));	# prefetch SIGMA[0]
+	&mov	(&swtmp(0),@T[0]);		# save s[0-3]
+	&mov	(&swtmp(1),@T[1]);
+	&mov	(&swtmp(2),@T[2]);
+	&mov	(&swtmp(3),@T[3]);
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+	&mov	(@T[2],&swtmp(2));
+	&mov	(@T[3],&swtmp(3));
+
+	&mov	($idx,&wparam(2));
+	&xor	(@T[0],&DWP(0*8+0,$idx));	# ^KL
+	&xor	(@T[1],&DWP(0*8+4,$idx));
+	&xor	(@T[2],&DWP(1*8+0,$idx));
+	&xor	(@T[3],&DWP(1*8+4,$idx));
+
+	&mov	($idx,&DWP($step*8,$key));	# prefetch SIGMA[4]
+	&mov	(&swtmp(0),@T[0]);		# save s[0-3]
+	&mov	(&swtmp(1),@T[1]);
+	&mov	(&swtmp(2),@T[2]);
+	&mov	(&swtmp(3),@T[3]);
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+	&mov	(@T[2],&swtmp(2));
+	&mov	(@T[3],&swtmp(3));
+
+	&mov	($idx,&wparam(0));
+	&cmp	($idx,128);
+	&jne	(&label("2nd256"));
+
+	&mov	($key,&wparam(2));
+	&lea	($key,&DWP(128,$key));		# size optimization
+
+	####### process KA
+	&_saveround	(2,$key,-128,@T);	# KA<<<0
+	&_rotl128	(@T,15,6,@T);		# KA<<<15
+	&_rotl128	(@T,15,8,@T);		# KA<<<(15+15=30)
+	&_rotl128	(@T,15,12,@T[0],@T[1]);	# KA<<<(30+15=45)
+	&_rotl128	(@T,15,14,@T);		# KA<<<(45+15=60)
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,2,20,@T);		# KA<<<(60+32+2=94)
+	&_rotl128	(@T,17,24,@T);		# KA<<<(94+17=111)
+
+	####### process KL
+	&_loadround	(0,$key,-128,@T);	# load KL
+	&_rotl128	(@T,15,4,@T);		# KL<<<15
+	&_rotl128	(@T,30,10,@T);		# KL<<<(15+30=45)
+	&_rotl128	(@T,15,13,@T[2],@T[3]);	# KL<<<(45+15=60)
+	&_rotl128	(@T,17,16,@T);		# KL<<<(60+17=77)
+	&_rotl128	(@T,17,18,@T);		# KL<<<(77+17=94)
+	&_rotl128	(@T,17,22,@T);		# KL<<<(94+17=111)
+
+	while (@T[0] ne "eax")			# restore order
+	{   unshift	(@T,pop(@T));   }
+
+	&mov	("eax",3);			# 3 grandRounds
+	&jmp	(&label("done"));
+
+&set_label("2nd256",16);
+	&mov	($idx,&wparam(2));
+	&_saveround	(6,$idx,@T);		# temporary storage for KA!
+
+	&xor	(@T[0],&DWP(4*8+0,$idx));	# KA^KR
+	&xor	(@T[1],&DWP(4*8+4,$idx));
+	&xor	(@T[2],&DWP(5*8+0,$idx));
+	&xor	(@T[3],&DWP(5*8+4,$idx));
+
+	&mov	($idx,&DWP($step*8,$key));	# prefetch SIGMA[8]
+	&mov	(&swtmp(0),@T[0]);		# save s[0-3]
+	&mov	(&swtmp(1),@T[1]);
+	&mov	(&swtmp(2),@T[2]);
+	&mov	(&swtmp(3),@T[3]);
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+	&mov	(@T[2],&swtmp(2));
+	&mov	(@T[3],&swtmp(3));
+
+	&mov	($key,&wparam(2));
+	&lea	($key,&DWP(128,$key));		# size optimization
+
+	####### process KB
+	&_saveround	(2,$key,-128,@T);	# KB<<<0
+	&_rotl128	(@T,30,10,@T);		# KB<<<30
+	&_rotl128	(@T,30,20,@T);		# KB<<<(30+30=60)
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,19,32,@T);		# KB<<<(60+32+19=111)
+
+	####### process KR
+	&_loadround	(4,$key,-128,@T);	# load KR
+	&_rotl128	(@T,15,4,@T);		# KR<<<15
+	&_rotl128	(@T,15,8,@T);		# KR<<<(15+15=30)
+	&_rotl128	(@T,30,18,@T);		# KR<<<(30+30=60)
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,2,26,@T);		# KR<<<(60+32+2=94)
+
+	####### process KA
+	&_loadround	(6,$key,-128,@T);	# load KA
+	&_rotl128	(@T,15,6,@T);		# KA<<<15
+	&_rotl128	(@T,30,14,@T);		# KA<<<(15+30=45)
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,0,24,@T);		# KA<<<(45+32+0=77)
+	&_rotl128	(@T,17,28,@T);		# KA<<<(77+17=94)
+
+	####### process KL
+	&_loadround	(0,$key,-128,@T);	# load KL
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,13,12,@T);		# KL<<<(32+13=45)
+	&_rotl128	(@T,15,16,@T);		# KL<<<(45+15=60)
+	&_rotl128	(@T,17,22,@T);		# KL<<<(60+17=77)
+	push		(@T,shift(@T));		# rotl128(@T,32);
+	&_rotl128	(@T,2,30,@T);		# KL<<<(77+32+2=111)
+
+	while (@T[0] ne "eax")			# restore order
+	{   unshift	(@T,pop(@T));   }
+
+	&mov	("eax",4);			# 4 grandRounds
+&set_label("done");
+	&lea	("edx",&DWP(272-128,$key));	# end of key schedule
+	&stack_pop(4);
+}
+&function_end("Camellia_Ekeygen");
+
+if ($OPENSSL) {
+# int Camellia_set_key (
+#		const unsigned char *userKey,
+#		int bits,
+#		CAMELLIA_KEY *key)
+&function_begin_B("Camellia_set_key");
+	&push	("ebx");
+	&mov	("ecx",&wparam(0));	# pull arguments
+	&mov	("ebx",&wparam(1));
+	&mov	("edx",&wparam(2));
+
+	&mov	("eax",-1);
+	&test	("ecx","ecx");
+	&jz	(&label("done"));	# userKey==NULL?
+	&test	("edx","edx");
+	&jz	(&label("done"));	# key==NULL?
+
+	&mov	("eax",-2);
+	&cmp	("ebx",256);
+	&je	(&label("arg_ok"));	# bits==256?
+	&cmp	("ebx",192);
+	&je	(&label("arg_ok"));	# bits==192?
+	&cmp	("ebx",128);
+	&jne	(&label("done"));	# bits!=128?
+&set_label("arg_ok",4);
+
+	&push	("edx");		# push arguments
+	&push	("ecx");
+	&push	("ebx");
+	&call	("Camellia_Ekeygen");
+	&stack_pop(3);
+
+	# eax holds grandRounds and edx points at where to put it
+	&mov	(&DWP(0,"edx"),"eax");
+	&xor	("eax","eax");
+&set_label("done",4);
+	&pop	("ebx");
+	&ret	();
+&function_end_B("Camellia_set_key");
+}
+
+@SBOX=(
+112,130, 44,236,179, 39,192,229,228,133, 87, 53,234, 12,174, 65,
+ 35,239,107,147, 69, 25,165, 33,237, 14, 79, 78, 29,101,146,189,
+134,184,175,143,124,235, 31,206, 62, 48,220, 95, 94,197, 11, 26,
+166,225, 57,202,213, 71, 93, 61,217,  1, 90,214, 81, 86,108, 77,
+139, 13,154,102,251,204,176, 45,116, 18, 43, 32,240,177,132,153,
+223, 76,203,194, 52,126,118,  5,109,183,169, 49,209, 23,  4,215,
+ 20, 88, 58, 97,222, 27, 17, 28, 50, 15,156, 22, 83, 24,242, 34,
+254, 68,207,178,195,181,122,145, 36,  8,232,168, 96,252,105, 80,
+170,208,160,125,161,137, 98,151, 84, 91, 30,149,224,255,100,210,
+ 16,196,  0, 72,163,247,117,219,138,  3,230,218,  9, 63,221,148,
+135, 92,131,  2,205, 74,144, 51,115,103,246,243,157,127,191,226,
+ 82,155,216, 38,200, 55,198, 59,129,150,111, 75, 19,190, 99, 46,
+233,121,167,140,159,110,188,142, 41,245,249,182, 47,253,180, 89,
+120,152,  6,106,231, 70,113,186,212, 37,171, 66,136,162,141,250,
+114,  7,185, 85,248,238,172, 10, 54, 73, 42,104, 60, 56,241,164,
+ 64, 40,211,123,187,201, 67,193, 21,227,173,244,119,199,128,158);
+
+sub S1110 { my $i=shift; $i=@SBOX[$i]; return $i<<24|$i<<16|$i<<8; }
+sub S4404 { my $i=shift; $i=($i<<1|$i>>7)&0xff; $i=@SBOX[$i]; return $i<<24|$i<<16|$i; }	
+sub S0222 { my $i=shift; $i=@SBOX[$i]; $i=($i<<1|$i>>7)&0xff; return $i<<16|$i<<8|$i; }	
+sub S3033 { my $i=shift; $i=@SBOX[$i]; $i=($i>>1|$i<<7)&0xff; return $i<<24|$i<<8|$i; }	
+
+&set_label("Camellia_SIGMA",64);
+&data_word(
+    0xa09e667f, 0x3bcc908b, 0xb67ae858, 0x4caa73b2,
+    0xc6ef372f, 0xe94f82be, 0x54ff53a5, 0xf1d36f1c,
+    0x10e527fa, 0xde682d1d, 0xb05688c2, 0xb3e6c1fd,
+    0,          0,          0,          0);
+&set_label("Camellia_SBOX",64);
+# tables are interleaved, remember?
+for ($i=0;$i<256;$i++) { &data_word(&S1110($i),&S4404($i)); }
+for ($i=0;$i<256;$i++) { &data_word(&S0222($i),&S3033($i)); }
+
+# void Camellia_cbc_encrypt (const void char *inp, unsigned char *out,
+#			size_t length, const CAMELLIA_KEY *key,
+#			unsigned char *ivp,const int enc);
+{
+# stack frame layout
+#             -4(%esp)		# return address	 0(%esp)
+#              0(%esp)		# s0			 4(%esp)
+#              4(%esp)		# s1			 8(%esp)
+#              8(%esp)		# s2			12(%esp)
+#             12(%esp)		# s3			16(%esp)
+#             16(%esp)		# end of key schedule	20(%esp)
+#             20(%esp)		# %esp backup
+my $_inp=&DWP(24,"esp");	#copy of wparam(0)
+my $_out=&DWP(28,"esp");	#copy of wparam(1)
+my $_len=&DWP(32,"esp");	#copy of wparam(2)
+my $_key=&DWP(36,"esp");	#copy of wparam(3)
+my $_ivp=&DWP(40,"esp");	#copy of wparam(4)
+my $ivec=&DWP(44,"esp");	#ivec[16]
+my $_tmp=&DWP(44,"esp");	#volatile variable [yes, aliases with ivec]
+my ($s0,$s1,$s2,$s3) = @T;
+
+&function_begin("Camellia_cbc_encrypt");
+	&mov	($s2 eq "ecx"? $s2 : "",&wparam(2));	# load len
+	&cmp	($s2,0);
+	&je	(&label("enc_out"));
+
+	&pushf	();
+	&cld	();
+
+	&mov	($s0,&wparam(0));	# load inp
+	&mov	($s1,&wparam(1));	# load out
+	#&mov	($s2,&wparam(2));	# load len
+	&mov	($s3,&wparam(3));	# load key
+	&mov	($Tbl,&wparam(4));	# load ivp
+
+	# allocate aligned stack frame...
+	&lea	($idx,&DWP(-64,"esp"));
+	&and	($idx,-64);
+
+	# place stack frame just "above mod 1024" the key schedule
+	# this ensures that cache associativity of 2 suffices
+	&lea	($key,&DWP(-64-63,$s3));
+	&sub	($key,$idx);
+	&neg	($key);
+	&and	($key,0x3C0);	# modulo 1024, but aligned to cache-line
+	&sub	($idx,$key);
+
+	&mov	($key,&wparam(5));	# load enc
+
+	&exch	("esp",$idx);
+	&add	("esp",4);		# reserve for return address!
+	&mov	($_esp,$idx);		# save %esp
+
+	&mov	($_inp,$s0);		# save copy of inp
+	&mov	($_out,$s1);		# save copy of out
+	&mov	($_len,$s2);		# save copy of len
+	&mov	($_key,$s3);		# save copy of key
+	&mov	($_ivp,$Tbl);		# save copy of ivp
+
+	&call   (&label("pic_point"));	# make it PIC!
+	&set_label("pic_point");
+	&blindpop($Tbl);
+	&lea    ($Tbl,&DWP(&label("Camellia_SBOX")."-".&label("pic_point"),$Tbl));
+
+	&mov	($idx,32);
+	&set_label("prefetch_sbox",4);
+		&mov	($s0,&DWP(0,$Tbl));
+		&mov	($s1,&DWP(32,$Tbl));
+		&mov	($s2,&DWP(64,$Tbl));
+		&mov	($s3,&DWP(96,$Tbl));
+		&lea	($Tbl,&DWP(128,$Tbl));
+		&dec	($idx);
+	&jnz	(&label("prefetch_sbox"));
+	&mov	($s0,$_key);
+	&sub	($Tbl,4096);
+	&mov	($idx,$_inp);
+	&mov	($s3,&DWP(272,$s0));		# load grandRounds
+
+	&cmp	($key,0);
+	&je	(&label("DECRYPT"));
+
+	&mov	($s2,$_len);
+	&mov	($key,$_ivp);
+	&shl	($s3,6);
+	&lea	($s3,&DWP(0,$s0,$s3));
+	&mov	($_end,$s3);
+
+	&test	($s2,0xFFFFFFF0);
+	&jz	(&label("enc_tail"));		# short input...
+
+	&mov	($s0,&DWP(0,$key));		# load iv
+	&mov	($s1,&DWP(4,$key));
+
+	&set_label("enc_loop",4);
+		&mov	($s2,&DWP(8,$key));
+		&mov	($s3,&DWP(12,$key));
+
+		&xor	($s0,&DWP(0,$idx));	# xor input data
+		&xor	($s1,&DWP(4,$idx));
+		&xor	($s2,&DWP(8,$idx));
+		&bswap	($s0);
+		&xor	($s3,&DWP(12,$idx));
+		&bswap	($s1);
+		&mov	($key,$_key);		# load key
+		&bswap	($s2);
+		&bswap	($s3);
+
+		&call	("_x86_Camellia_encrypt");
+
+		&mov	($idx,$_inp);		# load inp
+		&mov	($key,$_out);		# load out
+
+		&bswap	($s0);
+		&bswap	($s1);
+		&bswap	($s2);
+		&mov	(&DWP(0,$key),$s0);	# save output data
+		&bswap	($s3);
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($s2,$_len);		# load len
+
+		&lea	($idx,&DWP(16,$idx));
+		&mov	($_inp,$idx);		# save inp
+
+		&lea	($s3,&DWP(16,$key));
+		&mov	($_out,$s3);		# save out
+
+		&sub	($s2,16);
+		&test	($s2,0xFFFFFFF0);
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("enc_loop"));
+	&test	($s2,15);
+	&jnz	(&label("enc_tail"));
+	&mov	($idx,$_ivp);		# load ivp
+	&mov	($s2,&DWP(8,$key));	# restore last dwords
+	&mov	($s3,&DWP(12,$key));
+	&mov	(&DWP(0,$idx),$s0);	# save ivec
+	&mov	(&DWP(4,$idx),$s1);
+	&mov	(&DWP(8,$idx),$s2);
+	&mov	(&DWP(12,$idx),$s3);
+
+	&mov	("esp",$_esp);
+	&popf	();
+    &set_label("enc_out");
+	&function_end_A();
+	&pushf	();			# kludge, never executed
+
+    &set_label("enc_tail",4);
+	&mov	($s0,$key eq "edi" ? $key : "");
+	&mov	($key,$_out);			# load out
+	&push	($s0);				# push ivp
+	&mov	($s1,16);
+	&sub	($s1,$s2);
+	&cmp	($key,$idx);			# compare with inp
+	&je	(&label("enc_in_place"));
+	&align	(4);
+	&data_word(0xA4F3F689);	# rep movsb	# copy input
+	&jmp	(&label("enc_skip_in_place"));
+    &set_label("enc_in_place");
+	&lea	($key,&DWP(0,$key,$s2));
+    &set_label("enc_skip_in_place");
+	&mov	($s2,$s1);
+	&xor	($s0,$s0);
+	&align	(4);
+	&data_word(0xAAF3F689);	# rep stosb	# zero tail
+	&pop	($key);				# pop ivp
+
+	&mov	($idx,$_out);			# output as input
+	&mov	($s0,&DWP(0,$key));
+	&mov	($s1,&DWP(4,$key));
+	&mov	($_len,16);			# len=16
+	&jmp	(&label("enc_loop"));		# one more spin...
+
+#----------------------------- DECRYPT -----------------------------#
+&set_label("DECRYPT",16);
+	&shl	($s3,6);
+	&lea	($s3,&DWP(0,$s0,$s3));
+	&mov	($_end,$s0);
+	&mov	($_key,$s3);
+
+	&cmp	($idx,$_out);
+	&je	(&label("dec_in_place"));	# in-place processing...
+
+	&mov	($key,$_ivp);			# load ivp
+	&mov	($_tmp,$key);
+
+	&set_label("dec_loop",4);
+		&mov	($s0,&DWP(0,$idx));	# read input
+		&mov	($s1,&DWP(4,$idx));
+		&mov	($s2,&DWP(8,$idx));
+		&bswap	($s0);
+		&mov	($s3,&DWP(12,$idx));
+		&bswap	($s1);
+		&mov	($key,$_key);		# load key
+		&bswap	($s2);
+		&bswap	($s3);
+
+		&call	("_x86_Camellia_decrypt");
+
+		&mov	($key,$_tmp);		# load ivp
+		&mov	($idx,$_len);		# load len
+
+		&bswap	($s0);
+		&bswap	($s1);
+		&bswap	($s2);
+		&xor	($s0,&DWP(0,$key));	# xor iv
+		&bswap	($s3);
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+		&sub	($idx,16);
+		&jc	(&label("dec_partial"));
+		&mov	($_len,$idx);		# save len
+		&mov	($idx,$_inp);		# load inp
+		&mov	($key,$_out);		# load out
+
+		&mov	(&DWP(0,$key),$s0);	# write output
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($_tmp,$idx);		# save ivp
+		&lea	($idx,&DWP(16,$idx));
+		&mov	($_inp,$idx);		# save inp
+
+		&lea	($key,&DWP(16,$key));
+		&mov	($_out,$key);		# save out
+
+	&jnz	(&label("dec_loop"));
+	&mov	($key,$_tmp);		# load temp ivp
+    &set_label("dec_end");
+	&mov	($idx,$_ivp);		# load user ivp
+	&mov	($s0,&DWP(0,$key));	# load iv
+	&mov	($s1,&DWP(4,$key));
+	&mov	($s2,&DWP(8,$key));
+	&mov	($s3,&DWP(12,$key));
+	&mov	(&DWP(0,$idx),$s0);	# copy back to user
+	&mov	(&DWP(4,$idx),$s1);
+	&mov	(&DWP(8,$idx),$s2);
+	&mov	(&DWP(12,$idx),$s3);
+	&jmp	(&label("dec_out"));
+
+    &set_label("dec_partial",4);
+	&lea	($key,$ivec);
+	&mov	(&DWP(0,$key),$s0);	# dump output to stack
+	&mov	(&DWP(4,$key),$s1);
+	&mov	(&DWP(8,$key),$s2);
+	&mov	(&DWP(12,$key),$s3);
+	&lea	($s2 eq "ecx" ? $s2 : "",&DWP(16,$idx));
+	&mov	($idx eq "esi" ? $idx : "",$key);
+	&mov	($key eq "edi" ? $key : "",$_out);	# load out
+	&data_word(0xA4F3F689);	# rep movsb		# copy output
+	&mov	($key,$_inp);				# use inp as temp ivp
+	&jmp	(&label("dec_end"));
+
+    &set_label("dec_in_place",4);
+	&set_label("dec_in_place_loop");
+		&lea	($key,$ivec);
+		&mov	($s0,&DWP(0,$idx));	# read input
+		&mov	($s1,&DWP(4,$idx));
+		&mov	($s2,&DWP(8,$idx));
+		&mov	($s3,&DWP(12,$idx));
+
+		&mov	(&DWP(0,$key),$s0);	# copy to temp
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&bswap	($s0);
+		&mov	(&DWP(12,$key),$s3);
+		&bswap	($s1);
+		&mov	($key,$_key);		# load key
+		&bswap	($s2);
+		&bswap	($s3);
+
+		&call	("_x86_Camellia_decrypt");
+
+		&mov	($key,$_ivp);		# load ivp
+		&mov	($idx,$_out);		# load out
+
+		&bswap	($s0);
+		&bswap	($s1);
+		&bswap	($s2);
+		&xor	($s0,&DWP(0,$key));	# xor iv
+		&bswap	($s3);
+		&xor	($s1,&DWP(4,$key));
+		&xor	($s2,&DWP(8,$key));
+		&xor	($s3,&DWP(12,$key));
+
+		&mov	(&DWP(0,$idx),$s0);	# write output
+		&mov	(&DWP(4,$idx),$s1);
+		&mov	(&DWP(8,$idx),$s2);
+		&mov	(&DWP(12,$idx),$s3);
+
+		&lea	($idx,&DWP(16,$idx));
+		&mov	($_out,$idx);		# save out
+
+		&lea	($idx,$ivec);
+		&mov	($s0,&DWP(0,$idx));	# read temp
+		&mov	($s1,&DWP(4,$idx));
+		&mov	($s2,&DWP(8,$idx));
+		&mov	($s3,&DWP(12,$idx));
+
+		&mov	(&DWP(0,$key),$s0);	# copy iv
+		&mov	(&DWP(4,$key),$s1);
+		&mov	(&DWP(8,$key),$s2);
+		&mov	(&DWP(12,$key),$s3);
+
+		&mov	($idx,$_inp);		# load inp
+
+		&lea	($idx,&DWP(16,$idx));
+		&mov	($_inp,$idx);		# save inp
+
+		&mov	($s2,$_len);		# load len
+		&sub	($s2,16);
+		&jc	(&label("dec_in_place_partial"));
+		&mov	($_len,$s2);		# save len
+	&jnz	(&label("dec_in_place_loop"));
+	&jmp	(&label("dec_out"));
+
+    &set_label("dec_in_place_partial",4);
+	# one can argue if this is actually required...
+	&mov	($key eq "edi" ? $key : "",$_out);
+	&lea	($idx eq "esi" ? $idx : "",$ivec);
+	&lea	($key,&DWP(0,$key,$s2));
+	&lea	($idx,&DWP(16,$idx,$s2));
+	&neg	($s2 eq "ecx" ? $s2 : "");
+	&data_word(0xA4F3F689);	# rep movsb	# restore tail
+
+    &set_label("dec_out",4);
+    &mov	("esp",$_esp);
+    &popf	();
+&function_end("Camellia_cbc_encrypt");
+}
+
+&asciz("Camellia for x86 by <appro@openssl.org>");
+
+&asm_finish();
diff --git a/openssl/crypto/camellia/asm/cmll-x86_64.pl b/openssl/crypto/camellia/asm/cmll-x86_64.pl
new file mode 100644
index 000000000..c683646ca
--- /dev/null
+++ b/openssl/crypto/camellia/asm/cmll-x86_64.pl
@@ -0,0 +1,1080 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Copyright (c) 2008 Andy Polyakov <appro@openssl.org>
+#
+# This module may be used under the terms of either the GNU General
+# Public License version 2 or later, the GNU Lesser General Public
+# License version 2.1 or later, the Mozilla Public License version
+# 1.1 or the BSD License. The exact terms of either license are
+# distributed along with this module. For further details see
+# http://www.openssl.org/~appro/camellia/.
+# ====================================================================
+
+# Performance in cycles per processed byte (less is better) in
+# 'openssl speed ...' benchmark:
+#
+#			AMD64	Core2	EM64T
+# -evp camellia-128-ecb	16.7	21.0	22.7
+# + over gcc 3.4.6	+25%	+5%	0%
+#
+# camellia-128-cbc	15.7	20.4	21.1
+#
+# 128-bit key setup	128	216	205	cycles/key
+# + over gcc 3.4.6	+54%	+39%	+15%
+#
+# Numbers in "+" rows represent performance improvement over compiler
+# generated code. Key setup timings are impressive on AMD and Core2
+# thanks to 64-bit operations being covertly deployed. Improvement on
+# EM64T, pre-Core2 Intel x86_64 CPU, is not as impressive, because it
+# apparently emulates some of 64-bit operations in [32-bit] microcode.
+
+$flavour = shift;
+$output  = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+sub hi() { my $r=shift; $r =~ s/%[er]([a-d])x/%\1h/;    $r; }
+sub lo() { my $r=shift; $r =~ s/%[er]([a-d])x/%\1l/;
+                        $r =~ s/%[er]([sd]i)/%\1l/;
+                        $r =~ s/%(r[0-9]+)[d]?/%\1b/;   $r; }
+
+$t0="%eax";$t1="%ebx";$t2="%ecx";$t3="%edx";
+@S=("%r8d","%r9d","%r10d","%r11d");
+$i0="%esi";
+$i1="%edi";
+$Tbl="%rbp";	# size optimization
+$inp="%r12";
+$out="%r13";
+$key="%r14";
+$keyend="%r15";
+$arg0d=$win64?"%ecx":"%edi";
+
+# const unsigned int Camellia_SBOX[4][256];
+# Well, sort of... Camellia_SBOX[0][] is interleaved with [1][],
+# and [2][] - with [3][]. This is done to minimize code size.
+$SBOX1_1110=0;		# Camellia_SBOX[0]
+$SBOX4_4404=4;		# Camellia_SBOX[1]
+$SBOX2_0222=2048;	# Camellia_SBOX[2]
+$SBOX3_3033=2052;	# Camellia_SBOX[3]
+
+sub Camellia_Feistel {
+my $i=@_[0];
+my $seed=defined(@_[1])?@_[1]:0;
+my $scale=$seed<0?-8:8;
+my $j=($i&1)*2;
+my $s0=@S[($j)%4],$s1=@S[($j+1)%4],$s2=@S[($j+2)%4],$s3=@S[($j+3)%4];
+
+$code.=<<___;
+	xor	$s0,$t0				# t0^=key[0]
+	xor	$s1,$t1				# t1^=key[1]
+	movz	`&hi("$t0")`,$i0		# (t0>>8)&0xff
+	movz	`&lo("$t1")`,$i1		# (t1>>0)&0xff
+	mov	$SBOX3_3033($Tbl,$i0,8),$t3	# t3=SBOX3_3033[0]
+	mov	$SBOX1_1110($Tbl,$i1,8),$t2	# t2=SBOX1_1110[1]
+	movz	`&lo("$t0")`,$i0		# (t0>>0)&0xff
+	shr	\$16,$t0
+	movz	`&hi("$t1")`,$i1		# (t1>>8)&0xff
+	xor	$SBOX4_4404($Tbl,$i0,8),$t3	# t3^=SBOX4_4404[0]
+	shr	\$16,$t1
+	xor	$SBOX4_4404($Tbl,$i1,8),$t2	# t2^=SBOX4_4404[1]
+	movz	`&hi("$t0")`,$i0		# (t0>>24)&0xff
+	movz	`&lo("$t1")`,$i1		# (t1>>16)&0xff
+	xor	$SBOX1_1110($Tbl,$i0,8),$t3	# t3^=SBOX1_1110[0]
+	xor	$SBOX3_3033($Tbl,$i1,8),$t2	# t2^=SBOX3_3033[1]
+	movz	`&lo("$t0")`,$i0		# (t0>>16)&0xff
+	movz	`&hi("$t1")`,$i1		# (t1>>24)&0xff
+	xor	$SBOX2_0222($Tbl,$i0,8),$t3	# t3^=SBOX2_0222[0]
+	xor	$SBOX2_0222($Tbl,$i1,8),$t2	# t2^=SBOX2_0222[1]
+	mov	`$seed+($i+1)*$scale`($key),$t1	# prefetch key[i+1]
+	mov	`$seed+($i+1)*$scale+4`($key),$t0
+	xor	$t3,$t2				# t2^=t3
+	ror	\$8,$t3				# t3=RightRotate(t3,8)
+	xor	$t2,$s2
+	xor	$t2,$s3
+	xor	$t3,$s3
+___
+}
+
+# void Camellia_EncryptBlock_Rounds(
+#		int grandRounds,
+#		const Byte plaintext[],
+#		const KEY_TABLE_TYPE keyTable,
+#		Byte ciphertext[])
+$code=<<___;
+.text
+
+# V1.x API
+.globl	Camellia_EncryptBlock
+.type	Camellia_EncryptBlock,\@abi-omnipotent
+.align	16
+Camellia_EncryptBlock:
+	movl	\$128,%eax
+	subl	$arg0d,%eax
+	movl	\$3,$arg0d
+	adcl	\$0,$arg0d	# keyBitLength==128?3:4
+	jmp	.Lenc_rounds
+.size	Camellia_EncryptBlock,.-Camellia_EncryptBlock
+# V2
+.globl	Camellia_EncryptBlock_Rounds
+.type	Camellia_EncryptBlock_Rounds,\@function,4
+.align	16
+.Lenc_rounds:
+Camellia_EncryptBlock_Rounds:
+	push	%rbx
+	push	%rbp
+	push	%r13
+	push	%r14
+	push	%r15
+.Lenc_prologue:
+
+	#mov	%rsi,$inp		# put away arguments
+	mov	%rcx,$out
+	mov	%rdx,$key
+
+	shl	\$6,%edi		# process grandRounds
+	lea	.LCamellia_SBOX(%rip),$Tbl
+	lea	($key,%rdi),$keyend
+
+	mov	0(%rsi),@S[0]		# load plaintext
+	mov	4(%rsi),@S[1]
+	mov	8(%rsi),@S[2]
+	bswap	@S[0]
+	mov	12(%rsi),@S[3]
+	bswap	@S[1]
+	bswap	@S[2]
+	bswap	@S[3]
+
+	call	_x86_64_Camellia_encrypt
+
+	bswap	@S[0]
+	bswap	@S[1]
+	bswap	@S[2]
+	mov	@S[0],0($out)
+	bswap	@S[3]
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	mov	@S[3],12($out)
+
+	mov	0(%rsp),%r15
+	mov	8(%rsp),%r14
+	mov	16(%rsp),%r13
+	mov	24(%rsp),%rbp
+	mov	32(%rsp),%rbx
+	lea	40(%rsp),%rsp
+.Lenc_epilogue:
+	ret
+.size	Camellia_EncryptBlock_Rounds,.-Camellia_EncryptBlock_Rounds
+
+.type	_x86_64_Camellia_encrypt,\@abi-omnipotent
+.align	16
+_x86_64_Camellia_encrypt:
+	xor	0($key),@S[1]
+	xor	4($key),@S[0]		# ^=key[0-3]
+	xor	8($key),@S[3]
+	xor	12($key),@S[2]
+.align	16
+.Leloop:
+	mov	16($key),$t1		# prefetch key[4-5]
+	mov	20($key),$t0
+
+___
+	for ($i=0;$i<6;$i++) { Camellia_Feistel($i,16); }
+$code.=<<___;
+	lea	16*4($key),$key
+	cmp	$keyend,$key
+	mov	8($key),$t3		# prefetch key[2-3]
+	mov	12($key),$t2
+	je	.Ledone
+
+	and	@S[0],$t0
+	or	@S[3],$t3
+	rol	\$1,$t0
+	xor	$t3,@S[2]		# s2^=s3|key[3];
+	xor	$t0,@S[1]		# s1^=LeftRotate(s0&key[0],1);
+	and	@S[2],$t2
+	or	@S[1],$t1
+	rol	\$1,$t2
+	xor	$t1,@S[0]		# s0^=s1|key[1];
+	xor	$t2,@S[3]		# s3^=LeftRotate(s2&key[2],1);
+	jmp	.Leloop
+
+.align	16
+.Ledone:
+	xor	@S[2],$t0		# SwapHalf
+	xor	@S[3],$t1
+	xor	@S[0],$t2
+	xor	@S[1],$t3
+
+	mov	$t0,@S[0]
+	mov	$t1,@S[1]
+	mov	$t2,@S[2]
+	mov	$t3,@S[3]
+
+	.byte	0xf3,0xc3		# rep ret
+.size	_x86_64_Camellia_encrypt,.-_x86_64_Camellia_encrypt
+
+# V1.x API
+.globl	Camellia_DecryptBlock
+.type	Camellia_DecryptBlock,\@abi-omnipotent
+.align	16
+Camellia_DecryptBlock:
+	movl	\$128,%eax
+	subl	$arg0d,%eax
+	movl	\$3,$arg0d
+	adcl	\$0,$arg0d	# keyBitLength==128?3:4
+	jmp	.Ldec_rounds
+.size	Camellia_DecryptBlock,.-Camellia_DecryptBlock
+# V2
+.globl	Camellia_DecryptBlock_Rounds
+.type	Camellia_DecryptBlock_Rounds,\@function,4
+.align	16
+.Ldec_rounds:
+Camellia_DecryptBlock_Rounds:
+	push	%rbx
+	push	%rbp
+	push	%r13
+	push	%r14
+	push	%r15
+.Ldec_prologue:
+
+	#mov	%rsi,$inp		# put away arguments
+	mov	%rcx,$out
+	mov	%rdx,$keyend
+
+	shl	\$6,%edi		# process grandRounds
+	lea	.LCamellia_SBOX(%rip),$Tbl
+	lea	($keyend,%rdi),$key
+
+	mov	0(%rsi),@S[0]		# load plaintext
+	mov	4(%rsi),@S[1]
+	mov	8(%rsi),@S[2]
+	bswap	@S[0]
+	mov	12(%rsi),@S[3]
+	bswap	@S[1]
+	bswap	@S[2]
+	bswap	@S[3]
+
+	call	_x86_64_Camellia_decrypt
+
+	bswap	@S[0]
+	bswap	@S[1]
+	bswap	@S[2]
+	mov	@S[0],0($out)
+	bswap	@S[3]
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	mov	@S[3],12($out)
+
+	mov	0(%rsp),%r15
+	mov	8(%rsp),%r14
+	mov	16(%rsp),%r13
+	mov	24(%rsp),%rbp
+	mov	32(%rsp),%rbx
+	lea	40(%rsp),%rsp
+.Ldec_epilogue:
+	ret
+.size	Camellia_DecryptBlock_Rounds,.-Camellia_DecryptBlock_Rounds
+
+.type	_x86_64_Camellia_decrypt,\@abi-omnipotent
+.align	16
+_x86_64_Camellia_decrypt:
+	xor	0($key),@S[1]
+	xor	4($key),@S[0]		# ^=key[0-3]
+	xor	8($key),@S[3]
+	xor	12($key),@S[2]
+.align	16
+.Ldloop:
+	mov	-8($key),$t1		# prefetch key[4-5]
+	mov	-4($key),$t0
+
+___
+	for ($i=0;$i<6;$i++) { Camellia_Feistel($i,-8); }
+$code.=<<___;
+	lea	-16*4($key),$key
+	cmp	$keyend,$key
+	mov	0($key),$t3		# prefetch key[2-3]
+	mov	4($key),$t2
+	je	.Lddone
+
+	and	@S[0],$t0
+	or	@S[3],$t3
+	rol	\$1,$t0
+	xor	$t3,@S[2]		# s2^=s3|key[3];
+	xor	$t0,@S[1]		# s1^=LeftRotate(s0&key[0],1);
+	and	@S[2],$t2
+	or	@S[1],$t1
+	rol	\$1,$t2
+	xor	$t1,@S[0]		# s0^=s1|key[1];
+	xor	$t2,@S[3]		# s3^=LeftRotate(s2&key[2],1);
+
+	jmp	.Ldloop
+
+.align	16
+.Lddone:
+	xor	@S[2],$t2
+	xor	@S[3],$t3
+	xor	@S[0],$t0
+	xor	@S[1],$t1
+
+	mov	$t2,@S[0]		# SwapHalf
+	mov	$t3,@S[1]
+	mov	$t0,@S[2]
+	mov	$t1,@S[3]
+
+	.byte	0xf3,0xc3		# rep ret
+.size	_x86_64_Camellia_decrypt,.-_x86_64_Camellia_decrypt
+___
+
+sub _saveround {
+my ($rnd,$key,@T)=@_;
+my $bias=int(@T[0])?shift(@T):0;
+
+    if ($#T==3) {
+	$code.=<<___;
+	mov	@T[1],`$bias+$rnd*8+0`($key)
+	mov	@T[0],`$bias+$rnd*8+4`($key)
+	mov	@T[3],`$bias+$rnd*8+8`($key)
+	mov	@T[2],`$bias+$rnd*8+12`($key)
+___
+    } else {
+	$code.="	mov	@T[0],`$bias+$rnd*8+0`($key)\n";
+	$code.="	mov	@T[1],`$bias+$rnd*8+8`($key)\n"	if ($#T>=1);
+    }
+}
+
+sub _loadround {
+my ($rnd,$key,@T)=@_;
+my $bias=int(@T[0])?shift(@T):0;
+
+$code.="	mov	`$bias+$rnd*8+0`($key),@T[0]\n";
+$code.="	mov	`$bias+$rnd*8+8`($key),@T[1]\n"	if ($#T>=1);
+}
+
+# shld is very slow on Intel EM64T family. Even on AMD it limits
+# instruction decode rate [because it's VectorPath] and consequently
+# performance...
+sub __rotl128 {
+my ($i0,$i1,$rot)=@_;
+
+    if ($rot) {
+	$code.=<<___;
+	mov	$i0,%r11
+	shld	\$$rot,$i1,$i0
+	shld	\$$rot,%r11,$i1
+___
+    }
+}
+
+# ... Implementing 128-bit rotate without shld gives 80% better
+# performance EM64T, +15% on AMD64 and only ~7% degradation on
+# Core2. This is therefore preferred.
+sub _rotl128 {
+my ($i0,$i1,$rot)=@_;
+
+    if ($rot) {
+	$code.=<<___;
+	mov	$i0,%r11
+	shl	\$$rot,$i0
+	mov	$i1,%r9
+	shr	\$`64-$rot`,%r9
+	shr	\$`64-$rot`,%r11
+	or	%r9,$i0
+	shl	\$$rot,$i1
+	or	%r11,$i1
+___
+    }
+}
+
+{ my $step=0;
+
+$code.=<<___;
+.globl	Camellia_Ekeygen
+.type	Camellia_Ekeygen,\@function,3
+.align	16
+Camellia_Ekeygen:
+	push	%rbx
+	push	%rbp
+	push	%r13
+	push	%r14
+	push	%r15
+.Lkey_prologue:
+
+	mov	%rdi,$keyend		# put away arguments, keyBitLength
+	mov	%rdx,$out		# keyTable
+
+	mov	0(%rsi),@S[0]		# load 0-127 bits
+	mov	4(%rsi),@S[1]
+	mov	8(%rsi),@S[2]
+	mov	12(%rsi),@S[3]
+
+	bswap	@S[0]
+	bswap	@S[1]
+	bswap	@S[2]
+	bswap	@S[3]
+___
+	&_saveround	(0,$out,@S);	# KL<<<0
+$code.=<<___;
+	cmp	\$128,$keyend		# check keyBitLength
+	je	.L1st128
+
+	mov	16(%rsi),@S[0]		# load 128-191 bits
+	mov	20(%rsi),@S[1]
+	cmp	\$192,$keyend
+	je	.L1st192
+	mov	24(%rsi),@S[2]		# load 192-255 bits
+	mov	28(%rsi),@S[3]
+	jmp	.L1st256
+.L1st192:
+	mov	@S[0],@S[2]
+	mov	@S[1],@S[3]
+	not	@S[2]
+	not	@S[3]
+.L1st256:
+	bswap	@S[0]
+	bswap	@S[1]
+	bswap	@S[2]
+	bswap	@S[3]
+___
+	&_saveround	(4,$out,@S);	# temp storage for KR!
+$code.=<<___;
+	xor	0($out),@S[1]		# KR^KL
+	xor	4($out),@S[0]
+	xor	8($out),@S[3]
+	xor	12($out),@S[2]
+
+.L1st128:
+	lea	.LCamellia_SIGMA(%rip),$key
+	lea	.LCamellia_SBOX(%rip),$Tbl
+
+	mov	0($key),$t1
+	mov	4($key),$t0
+___
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+$code.=<<___;
+	xor	0($out),@S[1]		# ^KL
+	xor	4($out),@S[0]
+	xor	8($out),@S[3]
+	xor	12($out),@S[2]
+___
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+$code.=<<___;
+	cmp	\$128,$keyend
+	jne	.L2nd256
+
+	lea	128($out),$out		# size optimization
+	shl	\$32,%r8		# @S[0]||
+	shl	\$32,%r10		# @S[2]||
+	or	%r9,%r8			# ||@S[1]
+	or	%r11,%r10		# ||@S[3]
+___
+	&_loadround	(0,$out,-128,"%rax","%rbx");	# KL
+	&_saveround	(2,$out,-128,"%r8","%r10");	# KA<<<0
+	&_rotl128	("%rax","%rbx",15);
+	&_saveround	(4,$out,-128,"%rax","%rbx");	# KL<<<15
+	&_rotl128	("%r8","%r10",15);
+	&_saveround	(6,$out,-128,"%r8","%r10");	# KA<<<15
+	&_rotl128	("%r8","%r10",15);		# 15+15=30
+	&_saveround	(8,$out,-128,"%r8","%r10");	# KA<<<30
+	&_rotl128	("%rax","%rbx",30);		# 15+30=45
+	&_saveround	(10,$out,-128,"%rax","%rbx");	# KL<<<45
+	&_rotl128	("%r8","%r10",15);		# 30+15=45
+	&_saveround	(12,$out,-128,"%r8");		# KA<<<45
+	&_rotl128	("%rax","%rbx",15);		# 45+15=60
+	&_saveround	(13,$out,-128,"%rbx");		# KL<<<60
+	&_rotl128	("%r8","%r10",15);		# 45+15=60
+	&_saveround	(14,$out,-128,"%r8","%r10");	# KA<<<60
+	&_rotl128	("%rax","%rbx",17);		# 60+17=77
+	&_saveround	(16,$out,-128,"%rax","%rbx");	# KL<<<77
+	&_rotl128	("%rax","%rbx",17);		# 77+17=94
+	&_saveround	(18,$out,-128,"%rax","%rbx");	# KL<<<94
+	&_rotl128	("%r8","%r10",34);		# 60+34=94
+	&_saveround	(20,$out,-128,"%r8","%r10");	# KA<<<94
+	&_rotl128	("%rax","%rbx",17);		# 94+17=111
+	&_saveround	(22,$out,-128,"%rax","%rbx");	# KL<<<111
+	&_rotl128	("%r8","%r10",17);		# 94+17=111
+	&_saveround	(24,$out,-128,"%r8","%r10");	# KA<<<111
+$code.=<<___;
+	mov	\$3,%eax
+	jmp	.Ldone
+.align	16
+.L2nd256:
+___
+	&_saveround	(6,$out,@S);	# temp storage for KA!
+$code.=<<___;
+	xor	`4*8+0`($out),@S[1]	# KA^KR
+	xor	`4*8+4`($out),@S[0]
+	xor	`5*8+0`($out),@S[3]
+	xor	`5*8+4`($out),@S[2]
+___
+	&Camellia_Feistel($step++);
+	&Camellia_Feistel($step++);
+
+	&_loadround	(0,$out,"%rax","%rbx");	# KL
+	&_loadround	(4,$out,"%rcx","%rdx");	# KR
+	&_loadround	(6,$out,"%r14","%r15");	# KA
+$code.=<<___;
+	lea	128($out),$out		# size optimization
+	shl	\$32,%r8		# @S[0]||
+	shl	\$32,%r10		# @S[2]||
+	or	%r9,%r8			# ||@S[1]
+	or	%r11,%r10		# ||@S[3]
+___
+	&_saveround	(2,$out,-128,"%r8","%r10");	# KB<<<0
+	&_rotl128	("%rcx","%rdx",15);
+	&_saveround	(4,$out,-128,"%rcx","%rdx");	# KR<<<15
+	&_rotl128	("%r14","%r15",15);
+	&_saveround	(6,$out,-128,"%r14","%r15");	# KA<<<15
+	&_rotl128	("%rcx","%rdx",15);		# 15+15=30
+	&_saveround	(8,$out,-128,"%rcx","%rdx");	# KR<<<30
+	&_rotl128	("%r8","%r10",30);
+	&_saveround	(10,$out,-128,"%r8","%r10");	# KB<<<30
+	&_rotl128	("%rax","%rbx",45);
+	&_saveround	(12,$out,-128,"%rax","%rbx");	# KL<<<45
+	&_rotl128	("%r14","%r15",30);		# 15+30=45
+	&_saveround	(14,$out,-128,"%r14","%r15");	# KA<<<45
+	&_rotl128	("%rax","%rbx",15);		# 45+15=60
+	&_saveround	(16,$out,-128,"%rax","%rbx");	# KL<<<60
+	&_rotl128	("%rcx","%rdx",30);		# 30+30=60
+	&_saveround	(18,$out,-128,"%rcx","%rdx");	# KR<<<60
+	&_rotl128	("%r8","%r10",30);		# 30+30=60
+	&_saveround	(20,$out,-128,"%r8","%r10");	# KB<<<60
+	&_rotl128	("%rax","%rbx",17);		# 60+17=77
+	&_saveround	(22,$out,-128,"%rax","%rbx");	# KL<<<77
+	&_rotl128	("%r14","%r15",32);		# 45+32=77
+	&_saveround	(24,$out,-128,"%r14","%r15");	# KA<<<77
+	&_rotl128	("%rcx","%rdx",34);		# 60+34=94
+	&_saveround	(26,$out,-128,"%rcx","%rdx");	# KR<<<94
+	&_rotl128	("%r14","%r15",17);		# 77+17=94
+	&_saveround	(28,$out,-128,"%r14","%r15");	# KA<<<77
+	&_rotl128	("%rax","%rbx",34);		# 77+34=111
+	&_saveround	(30,$out,-128,"%rax","%rbx");	# KL<<<111
+	&_rotl128	("%r8","%r10",51);		# 60+51=111
+	&_saveround	(32,$out,-128,"%r8","%r10");	# KB<<<111
+$code.=<<___;
+	mov	\$4,%eax
+.Ldone:
+	mov	0(%rsp),%r15
+	mov	8(%rsp),%r14
+	mov	16(%rsp),%r13
+	mov	24(%rsp),%rbp
+	mov	32(%rsp),%rbx
+	lea	40(%rsp),%rsp
+.Lkey_epilogue:
+	ret
+.size	Camellia_Ekeygen,.-Camellia_Ekeygen
+___
+}
+
+@SBOX=(
+112,130, 44,236,179, 39,192,229,228,133, 87, 53,234, 12,174, 65,
+ 35,239,107,147, 69, 25,165, 33,237, 14, 79, 78, 29,101,146,189,
+134,184,175,143,124,235, 31,206, 62, 48,220, 95, 94,197, 11, 26,
+166,225, 57,202,213, 71, 93, 61,217,  1, 90,214, 81, 86,108, 77,
+139, 13,154,102,251,204,176, 45,116, 18, 43, 32,240,177,132,153,
+223, 76,203,194, 52,126,118,  5,109,183,169, 49,209, 23,  4,215,
+ 20, 88, 58, 97,222, 27, 17, 28, 50, 15,156, 22, 83, 24,242, 34,
+254, 68,207,178,195,181,122,145, 36,  8,232,168, 96,252,105, 80,
+170,208,160,125,161,137, 98,151, 84, 91, 30,149,224,255,100,210,
+ 16,196,  0, 72,163,247,117,219,138,  3,230,218,  9, 63,221,148,
+135, 92,131,  2,205, 74,144, 51,115,103,246,243,157,127,191,226,
+ 82,155,216, 38,200, 55,198, 59,129,150,111, 75, 19,190, 99, 46,
+233,121,167,140,159,110,188,142, 41,245,249,182, 47,253,180, 89,
+120,152,  6,106,231, 70,113,186,212, 37,171, 66,136,162,141,250,
+114,  7,185, 85,248,238,172, 10, 54, 73, 42,104, 60, 56,241,164,
+ 64, 40,211,123,187,201, 67,193, 21,227,173,244,119,199,128,158);
+
+sub S1110 { my $i=shift; $i=@SBOX[$i]; $i=$i<<24|$i<<16|$i<<8; sprintf("0x%08x",$i); }
+sub S4404 { my $i=shift; $i=($i<<1|$i>>7)&0xff; $i=@SBOX[$i]; $i=$i<<24|$i<<16|$i; sprintf("0x%08x",$i); }
+sub S0222 { my $i=shift; $i=@SBOX[$i]; $i=($i<<1|$i>>7)&0xff; $i=$i<<16|$i<<8|$i; sprintf("0x%08x",$i); }
+sub S3033 { my $i=shift; $i=@SBOX[$i]; $i=($i>>1|$i<<7)&0xff; $i=$i<<24|$i<<8|$i; sprintf("0x%08x",$i); }
+
+$code.=<<___;
+.align	64
+.LCamellia_SIGMA:
+.long	0x3bcc908b, 0xa09e667f, 0x4caa73b2, 0xb67ae858
+.long	0xe94f82be, 0xc6ef372f, 0xf1d36f1c, 0x54ff53a5
+.long	0xde682d1d, 0x10e527fa, 0xb3e6c1fd, 0xb05688c2
+.long	0,          0,          0,          0
+.LCamellia_SBOX:
+___
+# tables are interleaved, remember?
+sub data_word { $code.=".long\t".join(',',@_)."\n"; }
+for ($i=0;$i<256;$i++) { &data_word(&S1110($i),&S4404($i)); }
+for ($i=0;$i<256;$i++) { &data_word(&S0222($i),&S3033($i)); }
+
+# void Camellia_cbc_encrypt (const void char *inp, unsigned char *out,
+#			size_t length, const CAMELLIA_KEY *key,
+#			unsigned char *ivp,const int enc);
+{
+$_key="0(%rsp)";
+$_end="8(%rsp)";	# inp+len&~15
+$_res="16(%rsp)";	# len&15
+$ivec="24(%rsp)";
+$_ivp="40(%rsp)";
+$_rsp="48(%rsp)";
+
+$code.=<<___;
+.globl	Camellia_cbc_encrypt
+.type	Camellia_cbc_encrypt,\@function,6
+.align	16
+Camellia_cbc_encrypt:
+	cmp	\$0,%rdx
+	je	.Lcbc_abort
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+.Lcbc_prologue:
+
+	mov	%rsp,%rbp
+	sub	\$64,%rsp
+	and	\$-64,%rsp
+
+	# place stack frame just "above mod 1024" the key schedule,
+	# this ensures that cache associativity suffices
+	lea	-64-63(%rcx),%r10
+	sub	%rsp,%r10
+	neg	%r10
+	and	\$0x3C0,%r10
+	sub	%r10,%rsp
+	#add	\$8,%rsp		# 8 is reserved for callee's ra
+
+	mov	%rdi,$inp		# inp argument
+	mov	%rsi,$out		# out argument
+	mov	%r8,%rbx		# ivp argument
+	mov	%rcx,$key		# key argument
+	mov	272(%rcx),$keyend	# grandRounds
+
+	mov	%r8,$_ivp
+	mov	%rbp,$_rsp
+
+.Lcbc_body:
+	lea	.LCamellia_SBOX(%rip),$Tbl
+
+	mov	\$32,%ecx
+.align	4
+.Lcbc_prefetch_sbox:
+	mov	0($Tbl),%rax
+	mov	32($Tbl),%rsi
+	mov	64($Tbl),%rdi
+	mov	96($Tbl),%r11
+	lea	128($Tbl),$Tbl
+	loop	.Lcbc_prefetch_sbox
+	sub	\$4096,$Tbl
+	shl	\$6,$keyend
+	mov	%rdx,%rcx		# len argument
+	lea	($key,$keyend),$keyend
+
+	cmp	\$0,%r9d		# enc argument
+	je	.LCBC_DECRYPT
+
+	and	\$-16,%rdx
+	and	\$15,%rcx		# length residue
+	lea	($inp,%rdx),%rdx
+	mov	$key,$_key
+	mov	%rdx,$_end
+	mov	%rcx,$_res
+
+	cmp	$inp,%rdx
+	mov	0(%rbx),@S[0]		# load IV
+	mov	4(%rbx),@S[1]
+	mov	8(%rbx),@S[2]
+	mov	12(%rbx),@S[3]
+	je	.Lcbc_enc_tail
+	jmp	.Lcbc_eloop
+
+.align	16
+.Lcbc_eloop:
+	xor	0($inp),@S[0]
+	xor	4($inp),@S[1]
+	xor	8($inp),@S[2]
+	bswap	@S[0]
+	xor	12($inp),@S[3]
+	bswap	@S[1]
+	bswap	@S[2]
+	bswap	@S[3]
+
+	call	_x86_64_Camellia_encrypt
+
+	mov	$_key,$key		# "rewind" the key
+	bswap	@S[0]
+	mov	$_end,%rdx
+	bswap	@S[1]
+	mov	$_res,%rcx
+	bswap	@S[2]
+	mov	@S[0],0($out)
+	bswap	@S[3]
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	lea	16($inp),$inp
+	mov	@S[3],12($out)
+	cmp	%rdx,$inp
+	lea	16($out),$out
+	jne	.Lcbc_eloop
+
+	cmp	\$0,%rcx
+	jne	.Lcbc_enc_tail
+
+	mov	$_ivp,$out
+	mov	@S[0],0($out)		# write out IV residue
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	mov	@S[3],12($out)
+	jmp	.Lcbc_done
+
+.align	16
+.Lcbc_enc_tail:
+	xor	%rax,%rax
+	mov	%rax,0+$ivec
+	mov	%rax,8+$ivec
+	mov	%rax,$_res
+
+.Lcbc_enc_pushf:
+	pushfq
+	cld
+	mov	$inp,%rsi
+	lea	8+$ivec,%rdi
+	.long	0x9066A4F3		# rep movsb
+	popfq
+.Lcbc_enc_popf:
+
+	lea	$ivec,$inp
+	lea	16+$ivec,%rax
+	mov	%rax,$_end
+	jmp	.Lcbc_eloop		# one more time
+
+.align	16
+.LCBC_DECRYPT:
+	xchg	$key,$keyend
+	add	\$15,%rdx
+	and	\$15,%rcx		# length residue
+	and	\$-16,%rdx
+	mov	$key,$_key
+	lea	($inp,%rdx),%rdx
+	mov	%rdx,$_end
+	mov	%rcx,$_res
+
+	mov	(%rbx),%rax		# load IV
+	mov	8(%rbx),%rbx
+	jmp	.Lcbc_dloop
+.align	16
+.Lcbc_dloop:
+	mov	0($inp),@S[0]
+	mov	4($inp),@S[1]
+	mov	8($inp),@S[2]
+	bswap	@S[0]
+	mov	12($inp),@S[3]
+	bswap	@S[1]
+	mov	%rax,0+$ivec		# save IV to temporary storage
+	bswap	@S[2]
+	mov	%rbx,8+$ivec
+	bswap	@S[3]
+
+	call	_x86_64_Camellia_decrypt
+
+	mov	$_key,$key		# "rewind" the key
+	mov	$_end,%rdx
+	mov	$_res,%rcx
+
+	bswap	@S[0]
+	mov	($inp),%rax		# load IV for next iteration
+	bswap	@S[1]
+	mov	8($inp),%rbx
+	bswap	@S[2]
+	xor	0+$ivec,@S[0]
+	bswap	@S[3]
+	xor	4+$ivec,@S[1]
+	xor	8+$ivec,@S[2]
+	lea	16($inp),$inp
+	xor	12+$ivec,@S[3]
+	cmp	%rdx,$inp
+	je	.Lcbc_ddone
+
+	mov	@S[0],0($out)
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	mov	@S[3],12($out)
+
+	lea	16($out),$out
+	jmp	.Lcbc_dloop
+
+.align	16
+.Lcbc_ddone:
+	mov	$_ivp,%rdx
+	cmp	\$0,%rcx
+	jne	.Lcbc_dec_tail
+
+	mov	@S[0],0($out)
+	mov	@S[1],4($out)
+	mov	@S[2],8($out)
+	mov	@S[3],12($out)
+
+	mov	%rax,(%rdx)		# write out IV residue
+	mov	%rbx,8(%rdx)
+	jmp	.Lcbc_done
+.align	16
+.Lcbc_dec_tail:
+	mov	@S[0],0+$ivec
+	mov	@S[1],4+$ivec
+	mov	@S[2],8+$ivec
+	mov	@S[3],12+$ivec
+
+.Lcbc_dec_pushf:
+	pushfq
+	cld
+	lea	8+$ivec,%rsi
+	lea	($out),%rdi
+	.long	0x9066A4F3		# rep movsb
+	popfq
+.Lcbc_dec_popf:
+
+	mov	%rax,(%rdx)		# write out IV residue
+	mov	%rbx,8(%rdx)
+	jmp	.Lcbc_done
+
+.align	16
+.Lcbc_done:
+	mov	$_rsp,%rcx
+	mov	0(%rcx),%r15
+	mov	8(%rcx),%r14
+	mov	16(%rcx),%r13
+	mov	24(%rcx),%r12
+	mov	32(%rcx),%rbp
+	mov	40(%rcx),%rbx
+	lea	48(%rcx),%rsp
+.Lcbc_abort:
+	ret
+.size	Camellia_cbc_encrypt,.-Camellia_cbc_encrypt
+
+.asciz	"Camellia for x86_64 by <appro@openssl.org>"
+___
+}
+
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+#		CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+$rec="%rcx";
+$frame="%rdx";
+$context="%r8";
+$disp="%r9";
+
+$code.=<<___;
+.extern	__imp_RtlVirtualUnwind
+.type	common_se_handler,\@abi-omnipotent
+.align	16
+common_se_handler:
+	push	%rsi
+	push	%rdi
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+	pushfq
+	lea	-64(%rsp),%rsp
+
+	mov	120($context),%rax	# pull context->Rax
+	mov	248($context),%rbx	# pull context->Rip
+
+	mov	8($disp),%rsi		# disp->ImageBase
+	mov	56($disp),%r11		# disp->HandlerData
+
+	mov	0(%r11),%r10d		# HandlerData[0]
+	lea	(%rsi,%r10),%r10	# prologue label
+	cmp	%r10,%rbx		# context->Rip<prologue label
+	jb	.Lin_prologue
+
+	mov	152($context),%rax	# pull context->Rsp
+
+	mov	4(%r11),%r10d		# HandlerData[1]
+	lea	(%rsi,%r10),%r10	# epilogue label
+	cmp	%r10,%rbx		# context->Rip>=epilogue label
+	jae	.Lin_prologue
+
+	lea	40(%rax),%rax
+	mov	-8(%rax),%rbx
+	mov	-16(%rax),%rbp
+	mov	-24(%rax),%r13
+	mov	-32(%rax),%r14
+	mov	-40(%rax),%r15
+	mov	%rbx,144($context)	# restore context->Rbx
+	mov	%rbp,160($context)	# restore context->Rbp
+	mov	%r13,224($context)	# restore context->R13
+	mov	%r14,232($context)	# restore context->R14
+	mov	%r15,240($context)	# restore context->R15
+
+.Lin_prologue:
+	mov	8(%rax),%rdi
+	mov	16(%rax),%rsi
+	mov	%rax,152($context)	# restore context->Rsp
+	mov	%rsi,168($context)	# restore context->Rsi
+	mov	%rdi,176($context)	# restore context->Rdi
+
+	jmp	.Lcommon_seh_exit
+.size	common_se_handler,.-common_se_handler
+
+.type	cbc_se_handler,\@abi-omnipotent
+.align	16
+cbc_se_handler:
+	push	%rsi
+	push	%rdi
+	push	%rbx
+	push	%rbp
+	push	%r12
+	push	%r13
+	push	%r14
+	push	%r15
+	pushfq
+	lea	-64(%rsp),%rsp
+
+	mov	120($context),%rax	# pull context->Rax
+	mov	248($context),%rbx	# pull context->Rip
+
+	lea	.Lcbc_prologue(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<.Lcbc_prologue
+	jb	.Lin_cbc_prologue
+
+	lea	.Lcbc_body(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<.Lcbc_body
+	jb	.Lin_cbc_frame_setup
+
+	mov	152($context),%rax	# pull context->Rsp
+
+	lea	.Lcbc_abort(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip>=.Lcbc_abort
+	jae	.Lin_cbc_prologue
+
+	# handle pushf/popf in Camellia_cbc_encrypt
+	lea	.Lcbc_enc_pushf(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<=.Lcbc_enc_pushf
+	jbe	.Lin_cbc_no_flag
+	lea	8(%rax),%rax
+	lea	.Lcbc_enc_popf(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<.Lcbc_enc_popf
+	jb	.Lin_cbc_no_flag
+	lea	-8(%rax),%rax
+	lea	.Lcbc_dec_pushf(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<=.Lcbc_dec_pushf
+	jbe	.Lin_cbc_no_flag
+	lea	8(%rax),%rax
+	lea	.Lcbc_dec_popf(%rip),%r10
+	cmp	%r10,%rbx		# context->Rip<.Lcbc_dec_popf
+	jb	.Lin_cbc_no_flag
+	lea	-8(%rax),%rax
+
+.Lin_cbc_no_flag:
+	mov	48(%rax),%rax		# $_rsp
+	lea	48(%rax),%rax
+
+.Lin_cbc_frame_setup:
+	mov	-8(%rax),%rbx
+	mov	-16(%rax),%rbp
+	mov	-24(%rax),%r12
+	mov	-32(%rax),%r13
+	mov	-40(%rax),%r14
+	mov	-48(%rax),%r15
+	mov	%rbx,144($context)	# restore context->Rbx
+	mov	%rbp,160($context)	# restore context->Rbp
+	mov	%r12,216($context)	# restore context->R12
+	mov	%r13,224($context)	# restore context->R13
+	mov	%r14,232($context)	# restore context->R14
+	mov	%r15,240($context)	# restore context->R15
+
+.Lin_cbc_prologue:
+	mov	8(%rax),%rdi
+	mov	16(%rax),%rsi
+	mov	%rax,152($context)	# restore context->Rsp
+	mov	%rsi,168($context)	# restore context->Rsi
+	mov	%rdi,176($context)	# restore context->Rdi
+
+.align	4
+.Lcommon_seh_exit:
+
+	mov	40($disp),%rdi		# disp->ContextRecord
+	mov	$context,%rsi		# context
+	mov	\$`1232/8`,%ecx		# sizeof(CONTEXT)
+	.long	0xa548f3fc		# cld; rep movsq
+
+	mov	$disp,%rsi
+	xor	%rcx,%rcx		# arg1, UNW_FLAG_NHANDLER
+	mov	8(%rsi),%rdx		# arg2, disp->ImageBase
+	mov	0(%rsi),%r8		# arg3, disp->ControlPc
+	mov	16(%rsi),%r9		# arg4, disp->FunctionEntry
+	mov	40(%rsi),%r10		# disp->ContextRecord
+	lea	56(%rsi),%r11		# &disp->HandlerData
+	lea	24(%rsi),%r12		# &disp->EstablisherFrame
+	mov	%r10,32(%rsp)		# arg5
+	mov	%r11,40(%rsp)		# arg6
+	mov	%r12,48(%rsp)		# arg7
+	mov	%rcx,56(%rsp)		# arg8, (NULL)
+	call	*__imp_RtlVirtualUnwind(%rip)
+
+	mov	\$1,%eax		# ExceptionContinueSearch
+	lea	64(%rsp),%rsp
+	popfq
+	pop	%r15
+	pop	%r14
+	pop	%r13
+	pop	%r12
+	pop	%rbp
+	pop	%rbx
+	pop	%rdi
+	pop	%rsi
+	ret
+.size	cbc_se_handler,.-cbc_se_handler
+
+.section	.pdata
+.align	4
+	.rva	.LSEH_begin_Camellia_EncryptBlock_Rounds
+	.rva	.LSEH_end_Camellia_EncryptBlock_Rounds
+	.rva	.LSEH_info_Camellia_EncryptBlock_Rounds
+
+	.rva	.LSEH_begin_Camellia_DecryptBlock_Rounds
+	.rva	.LSEH_end_Camellia_DecryptBlock_Rounds
+	.rva	.LSEH_info_Camellia_DecryptBlock_Rounds
+
+	.rva	.LSEH_begin_Camellia_Ekeygen
+	.rva	.LSEH_end_Camellia_Ekeygen
+	.rva	.LSEH_info_Camellia_Ekeygen
+
+	.rva	.LSEH_begin_Camellia_cbc_encrypt
+	.rva	.LSEH_end_Camellia_cbc_encrypt
+	.rva	.LSEH_info_Camellia_cbc_encrypt
+
+.section	.xdata
+.align	8
+.LSEH_info_Camellia_EncryptBlock_Rounds:
+	.byte	9,0,0,0
+	.rva	common_se_handler
+	.rva	.Lenc_prologue,.Lenc_epilogue	# HandlerData[]
+.LSEH_info_Camellia_DecryptBlock_Rounds:
+	.byte	9,0,0,0
+	.rva	common_se_handler
+	.rva	.Ldec_prologue,.Ldec_epilogue	# HandlerData[]
+.LSEH_info_Camellia_Ekeygen:
+	.byte	9,0,0,0
+	.rva	common_se_handler
+	.rva	.Lkey_prologue,.Lkey_epilogue	# HandlerData[]
+.LSEH_info_Camellia_cbc_encrypt:
+	.byte	9,0,0,0
+	.rva	cbc_se_handler
+___
+}
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;