diff options
author | marha <marha@users.sourceforge.net> | 2012-04-10 11:54:31 +0200 |
---|---|---|
committer | marha <marha@users.sourceforge.net> | 2012-04-10 11:54:31 +0200 |
commit | 5564e91e3cf4ba5cb2fbebbc2d63d18f588016b8 (patch) | |
tree | c800a66664ea3af61eb13928db45a26275930b0b /openssl/crypto/rc4/asm/rc4-x86_64.pl | |
parent | d79e641dea89c0d5d651b11971c4c9e14df34629 (diff) | |
parent | 67326634496ef21b4acbf4cef2f05040d34aef9b (diff) | |
download | vcxsrv-5564e91e3cf4ba5cb2fbebbc2d63d18f588016b8.tar.gz vcxsrv-5564e91e3cf4ba5cb2fbebbc2d63d18f588016b8.tar.bz2 vcxsrv-5564e91e3cf4ba5cb2fbebbc2d63d18f588016b8.zip |
Merge remote-tracking branch 'origin/released'
Conflicts:
openssl/Configure
openssl/Makefile
openssl/crypto/opensslconf.h
openssl/util/mk1mf.pl
openssl/util/pl/VC-32.pl
Diffstat (limited to 'openssl/crypto/rc4/asm/rc4-x86_64.pl')
-rw-r--r-- | openssl/crypto/rc4/asm/rc4-x86_64.pl | 290 |
1 files changed, 231 insertions, 59 deletions
diff --git a/openssl/crypto/rc4/asm/rc4-x86_64.pl b/openssl/crypto/rc4/asm/rc4-x86_64.pl index 677be5fe2..d6eac205e 100644 --- a/openssl/crypto/rc4/asm/rc4-x86_64.pl +++ b/openssl/crypto/rc4/asm/rc4-x86_64.pl @@ -7,6 +7,8 @@ # details see http://www.openssl.org/~appro/cryptogams/. # ==================================================================== # +# July 2004 +# # 2.22x RC4 tune-up:-) It should be noted though that my hand [as in # "hand-coded assembler"] doesn't stand for the whole improvement # coefficient. It turned out that eliminating RC4_CHAR from config @@ -19,6 +21,8 @@ # to operate on partial registers, it turned out to be the best bet. # At least for AMD... How IA32E would perform remains to be seen... +# November 2004 +# # As was shown by Marc Bevand reordering of couple of load operations # results in even higher performance gain of 3.3x:-) At least on # Opteron... For reference, 1x in this case is RC4_CHAR C-code @@ -26,6 +30,8 @@ # Latter means that if you want to *estimate* what to expect from # *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz. +# November 2004 +# # Intel P4 EM64T core was found to run the AMD64 code really slow... # The only way to achieve comparable performance on P4 was to keep # RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to @@ -33,10 +39,14 @@ # on either AMD and Intel platforms, I implement both cases. See # rc4_skey.c for further details... +# April 2005 +# # P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing # those with add/sub results in 50% performance improvement of folded # loop... +# May 2005 +# # As was shown by Zou Nanhai loop unrolling can improve Intel EM64T # performance by >30% [unlike P4 32-bit case that is]. But this is # provided that loads are reordered even more aggressively! Both code @@ -50,6 +60,8 @@ # is not implemented, then this final RC4_CHAR code-path should be # preferred, as it provides better *all-round* performance]. +# March 2007 +# # Intel Core2 was observed to perform poorly on both code paths:-( It # apparently suffers from some kind of partial register stall, which # occurs in 64-bit mode only [as virtually identical 32-bit loop was @@ -58,6 +70,37 @@ # fit for Core2 and therefore the code was modified to skip cloop8 on # this CPU. +# May 2010 +# +# Intel Westmere was observed to perform suboptimally. Adding yet +# another movzb to cloop1 improved performance by almost 50%! Core2 +# performance is improved too, but nominally... + +# May 2011 +# +# The only code path that was not modified is P4-specific one. Non-P4 +# Intel code path optimization is heavily based on submission by Maxim +# Perminov, Maxim Locktyukhin and Jim Guilford of Intel. I've used +# some of the ideas even in attempt to optmize the original RC4_INT +# code path... Current performance in cycles per processed byte (less +# is better) and improvement coefficients relative to previous +# version of this module are: +# +# Opteron 5.3/+0%(*) +# P4 6.5 +# Core2 6.2/+15%(**) +# Westmere 4.2/+60% +# Sandy Bridge 4.2/+120% +# Atom 9.3/+80% +# +# (*) But corresponding loop has less instructions, which should have +# positive effect on upcoming Bulldozer, which has one less ALU. +# For reference, Intel code runs at 6.8 cpb rate on Opteron. +# (**) Note that Core2 result is ~15% lower than corresponding result +# for 32-bit code, meaning that it's possible to improve it, +# but more than likely at the cost of the others (see rc4-586.pl +# to get the idea)... + $flavour = shift; $output = shift; if ($flavour =~ /\./) { $output = $flavour; undef $flavour; } @@ -76,13 +119,10 @@ $len="%rsi"; # arg2 $inp="%rdx"; # arg3 $out="%rcx"; # arg4 -@XX=("%r8","%r10"); -@TX=("%r9","%r11"); -$YY="%r12"; -$TY="%r13"; - +{ $code=<<___; .text +.extern OPENSSL_ia32cap_P .globl RC4 .type RC4,\@function,4 @@ -95,48 +135,173 @@ RC4: or $len,$len push %r12 push %r13 .Lprologue: + mov $len,%r11 + mov $inp,%r12 + mov $out,%r13 +___ +my $len="%r11"; # reassign input arguments +my $inp="%r12"; +my $out="%r13"; - add \$8,$dat - movl -8($dat),$XX[0]#d - movl -4($dat),$YY#d +my @XX=("%r10","%rsi"); +my @TX=("%rax","%rbx"); +my $YY="%rcx"; +my $TY="%rdx"; + +$code.=<<___; + xor $XX[0],$XX[0] + xor $YY,$YY + + lea 8($dat),$dat + mov -8($dat),$XX[0]#b + mov -4($dat),$YY#b cmpl \$-1,256($dat) je .LRC4_CHAR + mov OPENSSL_ia32cap_P(%rip),%r8d + xor $TX[1],$TX[1] inc $XX[0]#b + sub $XX[0],$TX[1] + sub $inp,$out movl ($dat,$XX[0],4),$TX[0]#d - test \$-8,$len + test \$-16,$len jz .Lloop1 - jmp .Lloop8 + bt \$30,%r8d # Intel CPU? + jc .Lintel + and \$7,$TX[1] + lea 1($XX[0]),$XX[1] + jz .Loop8 + sub $TX[1],$len +.Loop8_warmup: + add $TX[0]#b,$YY#b + movl ($dat,$YY,4),$TY#d + movl $TX[0]#d,($dat,$YY,4) + movl $TY#d,($dat,$XX[0],4) + add $TY#b,$TX[0]#b + inc $XX[0]#b + movl ($dat,$TX[0],4),$TY#d + movl ($dat,$XX[0],4),$TX[0]#d + xorb ($inp),$TY#b + movb $TY#b,($out,$inp) + lea 1($inp),$inp + dec $TX[1] + jnz .Loop8_warmup + + lea 1($XX[0]),$XX[1] + jmp .Loop8 .align 16 -.Lloop8: +.Loop8: ___ for ($i=0;$i<8;$i++) { +$code.=<<___ if ($i==7); + add \$8,$XX[1]#b +___ $code.=<<___; add $TX[0]#b,$YY#b - mov $XX[0],$XX[1] movl ($dat,$YY,4),$TY#d - ror \$8,%rax # ror is redundant when $i=0 - inc $XX[1]#b - movl ($dat,$XX[1],4),$TX[1]#d - cmp $XX[1],$YY movl $TX[0]#d,($dat,$YY,4) - cmove $TX[0],$TX[1] - movl $TY#d,($dat,$XX[0],4) + movl `4*($i==7?-1:$i)`($dat,$XX[1],4),$TX[1]#d + ror \$8,%r8 # ror is redundant when $i=0 + movl $TY#d,4*$i($dat,$XX[0],4) add $TX[0]#b,$TY#b - movb ($dat,$TY,4),%al + movb ($dat,$TY,4),%r8b ___ -push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers +push(@TX,shift(@TX)); #push(@XX,shift(@XX)); # "rotate" registers } $code.=<<___; - ror \$8,%rax + add \$8,$XX[0]#b + ror \$8,%r8 sub \$8,$len - xor ($inp),%rax - add \$8,$inp - mov %rax,($out) - add \$8,$out + xor ($inp),%r8 + mov %r8,($out,$inp) + lea 8($inp),$inp test \$-8,$len - jnz .Lloop8 + jnz .Loop8 + cmp \$0,$len + jne .Lloop1 + jmp .Lexit + +.align 16 +.Lintel: + test \$-32,$len + jz .Lloop1 + and \$15,$TX[1] + jz .Loop16_is_hot + sub $TX[1],$len +.Loop16_warmup: + add $TX[0]#b,$YY#b + movl ($dat,$YY,4),$TY#d + movl $TX[0]#d,($dat,$YY,4) + movl $TY#d,($dat,$XX[0],4) + add $TY#b,$TX[0]#b + inc $XX[0]#b + movl ($dat,$TX[0],4),$TY#d + movl ($dat,$XX[0],4),$TX[0]#d + xorb ($inp),$TY#b + movb $TY#b,($out,$inp) + lea 1($inp),$inp + dec $TX[1] + jnz .Loop16_warmup + + mov $YY,$TX[1] + xor $YY,$YY + mov $TX[1]#b,$YY#b + +.Loop16_is_hot: + lea ($dat,$XX[0],4),$XX[1] +___ +sub RC4_loop { + my $i=shift; + my $j=$i<0?0:$i; + my $xmm="%xmm".($j&1); + + $code.=" add \$16,$XX[0]#b\n" if ($i==15); + $code.=" movdqu ($inp),%xmm2\n" if ($i==15); + $code.=" add $TX[0]#b,$YY#b\n" if ($i<=0); + $code.=" movl ($dat,$YY,4),$TY#d\n"; + $code.=" pxor %xmm0,%xmm2\n" if ($i==0); + $code.=" psllq \$8,%xmm1\n" if ($i==0); + $code.=" pxor $xmm,$xmm\n" if ($i<=1); + $code.=" movl $TX[0]#d,($dat,$YY,4)\n"; + $code.=" add $TY#b,$TX[0]#b\n"; + $code.=" movl `4*($j+1)`($XX[1]),$TX[1]#d\n" if ($i<15); + $code.=" movz $TX[0]#b,$TX[0]#d\n"; + $code.=" movl $TY#d,4*$j($XX[1])\n"; + $code.=" pxor %xmm1,%xmm2\n" if ($i==0); + $code.=" lea ($dat,$XX[0],4),$XX[1]\n" if ($i==15); + $code.=" add $TX[1]#b,$YY#b\n" if ($i<15); + $code.=" pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n"; + $code.=" movdqu %xmm2,($out,$inp)\n" if ($i==0); + $code.=" lea 16($inp),$inp\n" if ($i==0); + $code.=" movl ($XX[1]),$TX[1]#d\n" if ($i==15); +} + RC4_loop(-1); +$code.=<<___; + jmp .Loop16_enter +.align 16 +.Loop16: +___ + +for ($i=0;$i<16;$i++) { + $code.=".Loop16_enter:\n" if ($i==1); + RC4_loop($i); + push(@TX,shift(@TX)); # "rotate" registers +} +$code.=<<___; + mov $YY,$TX[1] + xor $YY,$YY # keyword to partial register + sub \$16,$len + mov $TX[1]#b,$YY#b + test \$-16,$len + jnz .Loop16 + + psllq \$8,%xmm1 + pxor %xmm0,%xmm2 + pxor %xmm1,%xmm2 + movdqu %xmm2,($out,$inp) + lea 16($inp),$inp + cmp \$0,$len jne .Lloop1 jmp .Lexit @@ -152,9 +317,8 @@ $code.=<<___; movl ($dat,$TX[0],4),$TY#d movl ($dat,$XX[0],4),$TX[0]#d xorb ($inp),$TY#b - inc $inp - movb $TY#b,($out) - inc $out + movb $TY#b,($out,$inp) + lea 1($inp),$inp dec $len jnz .Lloop1 jmp .Lexit @@ -165,13 +329,11 @@ $code.=<<___; movzb ($dat,$XX[0]),$TX[0]#d test \$-8,$len jz .Lcloop1 - cmpl \$0,260($dat) - jnz .Lcloop1 jmp .Lcloop8 .align 16 .Lcloop8: - mov ($inp),%eax - mov 4($inp),%ebx + mov ($inp),%r8d + mov 4($inp),%r9d ___ # unroll 2x4-wise, because 64-bit rotates kill Intel P4... for ($i=0;$i<4;$i++) { @@ -188,8 +350,8 @@ $code.=<<___; mov $TX[0],$TX[1] .Lcmov$i: add $TX[0]#b,$TY#b - xor ($dat,$TY),%al - ror \$8,%eax + xor ($dat,$TY),%r8b + ror \$8,%r8d ___ push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers } @@ -207,16 +369,16 @@ $code.=<<___; mov $TX[0],$TX[1] .Lcmov$i: add $TX[0]#b,$TY#b - xor ($dat,$TY),%bl - ror \$8,%ebx + xor ($dat,$TY),%r9b + ror \$8,%r9d ___ push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers } $code.=<<___; lea -8($len),$len - mov %eax,($out) + mov %r8d,($out) lea 8($inp),$inp - mov %ebx,4($out) + mov %r9d,4($out) lea 8($out),$out test \$-8,$len @@ -229,6 +391,7 @@ $code.=<<___; .align 16 .Lcloop1: add $TX[0]#b,$YY#b + movzb $YY#b,$YY#d movzb ($dat,$YY),$TY#d movb $TX[0]#b,($dat,$YY) movb $TY#b,($dat,$XX[0]) @@ -260,16 +423,16 @@ $code.=<<___; ret .size RC4,.-RC4 ___ +} $idx="%r8"; $ido="%r9"; $code.=<<___; -.extern OPENSSL_ia32cap_P -.globl RC4_set_key -.type RC4_set_key,\@function,3 +.globl private_RC4_set_key +.type private_RC4_set_key,\@function,3 .align 16 -RC4_set_key: +private_RC4_set_key: lea 8($dat),$dat lea ($inp,$len),$inp neg $len @@ -280,12 +443,9 @@ RC4_set_key: xor %r11,%r11 mov OPENSSL_ia32cap_P(%rip),$idx#d - bt \$20,$idx#d - jnc .Lw1stloop - bt \$30,$idx#d - setc $ido#b - mov $ido#d,260($dat) - jmp .Lc1stloop + bt \$20,$idx#d # RC4_CHAR? + jc .Lc1stloop + jmp .Lw1stloop .align 16 .Lw1stloop: @@ -339,7 +499,7 @@ RC4_set_key: mov %eax,-8($dat) mov %eax,-4($dat) ret -.size RC4_set_key,.-RC4_set_key +.size private_RC4_set_key,.-private_RC4_set_key .globl RC4_options .type RC4_options,\@abi-omnipotent @@ -348,18 +508,20 @@ RC4_options: lea .Lopts(%rip),%rax mov OPENSSL_ia32cap_P(%rip),%edx bt \$20,%edx - jnc .Ldone - add \$12,%rax + jc .L8xchar bt \$30,%edx jnc .Ldone - add \$13,%rax + add \$25,%rax + ret +.L8xchar: + add \$12,%rax .Ldone: ret .align 64 .Lopts: .asciz "rc4(8x,int)" .asciz "rc4(8x,char)" -.asciz "rc4(1x,char)" +.asciz "rc4(16x,int)" .asciz "RC4 for x86_64, CRYPTOGAMS by <appro\@openssl.org>" .align 64 .size RC4_options,.-RC4_options @@ -482,22 +644,32 @@ key_se_handler: .rva .LSEH_end_RC4 .rva .LSEH_info_RC4 - .rva .LSEH_begin_RC4_set_key - .rva .LSEH_end_RC4_set_key - .rva .LSEH_info_RC4_set_key + .rva .LSEH_begin_private_RC4_set_key + .rva .LSEH_end_private_RC4_set_key + .rva .LSEH_info_private_RC4_set_key .section .xdata .align 8 .LSEH_info_RC4: .byte 9,0,0,0 .rva stream_se_handler -.LSEH_info_RC4_set_key: +.LSEH_info_private_RC4_set_key: .byte 9,0,0,0 .rva key_se_handler ___ } -$code =~ s/#([bwd])/$1/gm; +sub reg_part { +my ($reg,$conv)=@_; + if ($reg =~ /%r[0-9]+/) { $reg .= $conv; } + elsif ($conv eq "b") { $reg =~ s/%[er]([^x]+)x?/%$1l/; } + elsif ($conv eq "w") { $reg =~ s/%[er](.+)/%$1/; } + elsif ($conv eq "d") { $reg =~ s/%[er](.+)/%e$1/; } + return $reg; +} + +$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem; +$code =~ s/\`([^\`]*)\`/eval $1/gem; print $code; |