Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

11 files changed, 2094 insertions, 0 deletions

diff --git a/openssl/crypto/ripemd/Makefile b/openssl/crypto/ripemd/Makefile
new file mode 100644
index 000000000..6145f1369
--- /dev/null
+++ b/openssl/crypto/ripemd/Makefile
@@ -0,0 +1,104 @@
+#
+# OpenSSL/crypto/ripemd/Makefile
+#
+
+DIR=    ripemd
+TOP=    ../..
+CC=     cc
+CPP=    $(CC) -E
+INCLUDES=
+CFLAG=-g
+MAKEFILE=       Makefile
+AR=             ar r
+
+RIP_ASM_OBJ=
+
+CFLAGS= $(INCLUDES) $(CFLAG)
+ASFLAGS= $(INCLUDES) $(ASFLAG)
+AFLAGS= $(ASFLAGS)
+
+GENERAL=Makefile
+TEST=rmdtest.c
+APPS=
+
+LIB=$(TOP)/libcrypto.a
+LIBSRC=rmd_dgst.c rmd_one.c
+LIBOBJ=rmd_dgst.o rmd_one.o $(RMD160_ASM_OBJ)
+
+SRC= $(LIBSRC)
+
+EXHEADER= ripemd.h
+HEADER= rmd_locl.h rmdconst.h $(EXHEADER)
+
+ALL=    $(GENERAL) $(SRC) $(HEADER)
+
+top:
+	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
+
+all:    lib
+
+lib:    $(LIBOBJ)
+	$(ARX) $(LIB) $(LIBOBJ)
+	$(RANLIB) $(LIB) || echo Never mind.
+	@touch lib
+
+# ELF
+rm86-elf.s: asm/rmd-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) rmd-586.pl elf $(CFLAGS) > ../$@)
+# COFF
+rm86-cof.s: asm/rmd-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) rmd-586.pl coff $(CFLAGS) > ../$@)
+# a.out
+rm86-out.s: asm/rmd-586.pl ../perlasm/x86asm.pl
+	(cd asm; $(PERL) rmd-586.pl a.out $(CFLAGS) > ../$@)
+
+files:
+	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
+
+links:
+	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
+	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
+	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
+
+install:
+	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
+	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
+	do  \
+	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
+	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
+	done;
+
+tags:
+	ctags $(SRC)
+
+tests:
+
+lint:
+	lint -DLINT $(INCLUDES) $(SRC)>fluff
+
+depend:
+	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
+	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
+
+dclean:
+	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
+	mv -f Makefile.new $(MAKEFILE)
+
+clean:
+	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+rmd_dgst.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
+rmd_dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
+rmd_dgst.o: ../../include/openssl/fips.h ../../include/openssl/lhash.h
+rmd_dgst.o: ../../include/openssl/opensslconf.h
+rmd_dgst.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
+rmd_dgst.o: ../../include/openssl/ripemd.h ../../include/openssl/safestack.h
+rmd_dgst.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
+rmd_dgst.o: ../md32_common.h rmd_dgst.c rmd_locl.h rmdconst.h
+rmd_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
+rmd_one.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+rmd_one.o: ../../include/openssl/ossl_typ.h ../../include/openssl/ripemd.h
+rmd_one.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+rmd_one.o: ../../include/openssl/symhacks.h rmd_one.c
diff --git a/openssl/crypto/ripemd/README b/openssl/crypto/ripemd/README
new file mode 100644
index 000000000..f1ffc8b13
--- /dev/null
+++ b/openssl/crypto/ripemd/README
@@ -0,0 +1,15 @@
+RIPEMD-160
+http://www.esat.kuleuven.ac.be/~bosselae/ripemd160.html
+
+This is my implementation of RIPEMD-160.  The pentium assember is a little
+off the pace since I only get 1050 cycles, while the best is 1013.
+I have a few ideas for how to get another 20 or so cycles, but at
+this point I will not bother right now.  I believe the trick will be
+to remove my 'copy X array onto stack' until inside the RIP1() finctions the
+first time round.  To do this I need another register and will only have one
+temporary one.  A bit tricky....  I can also cleanup the saving of the 5 words
+after the first half of the calculation.  I should read the origional
+value, add then write.  Currently I just save the new and read the origioal.
+I then read both at the end.  Bad.
+
+eric (20-Jan-1998)
diff --git a/openssl/crypto/ripemd/asm/rips.cpp b/openssl/crypto/ripemd/asm/rips.cpp
new file mode 100644
index 000000000..f7a13677a
--- /dev/null
+++ b/openssl/crypto/ripemd/asm/rips.cpp
@@ -0,0 +1,82 @@
+//
+// gettsc.inl
+//
+// gives access to the Pentium's (secret) cycle counter
+//
+// This software was written by Leonard Janke (janke@unixg.ubc.ca)
+// in 1996-7 and is entered, by him, into the public domain.
+
+#if defined(__WATCOMC__)
+void GetTSC(unsigned long&);
+#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
+#elif defined(__GNUC__)
+inline
+void GetTSC(unsigned long& tsc)
+{
+  asm volatile(".byte 15, 49\n\t"
+	       : "=eax" (tsc)
+	       :
+	       : "%edx", "%eax");
+}
+#elif defined(_MSC_VER)
+inline
+void GetTSC(unsigned long& tsc)
+{
+  unsigned long a;
+  __asm _emit 0fh
+  __asm _emit 31h
+  __asm mov a, eax;
+  tsc=a;
+}
+#endif      
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <openssl/ripemd.h>
+
+#define ripemd160_block_x86 ripemd160_block_asm_host_order
+
+extern "C" {
+void ripemd160_block_x86(RIPEMD160_CTX *ctx, unsigned char *buffer,int num);
+}
+
+void main(int argc,char *argv[])
+	{
+	unsigned char buffer[64*256];
+	RIPEMD160_CTX ctx;
+	unsigned long s1,s2,e1,e2;
+	unsigned char k[16];
+	unsigned long data[2];
+	unsigned char iv[8];
+	int i,num=0,numm;
+	int j=0;
+
+	if (argc >= 2)
+		num=atoi(argv[1]);
+
+	if (num == 0) num=16;
+	if (num > 250) num=16;
+	numm=num+2;
+#if 0
+	num*=64;
+	numm*=64;
+#endif
+
+	for (j=0; j<6; j++)
+		{
+		for (i=0; i<10; i++) /**/
+			{
+			ripemd160_block_x86(&ctx,buffer,numm);
+			GetTSC(s1);
+			ripemd160_block_x86(&ctx,buffer,numm);
+			GetTSC(e1);
+			GetTSC(s2);
+			ripemd160_block_x86(&ctx,buffer,num);
+			GetTSC(e2);
+			ripemd160_block_x86(&ctx,buffer,num);
+			}
+		printf("ripemd160 (%d bytes) %d %d (%.2f)\n",num*64,
+			e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
+		}
+	}
+
diff --git a/openssl/crypto/ripemd/asm/rmd-586.pl b/openssl/crypto/ripemd/asm/rmd-586.pl
new file mode 100644
index 000000000..4f3c4c967
--- /dev/null
+++ b/openssl/crypto/ripemd/asm/rmd-586.pl
@@ -0,0 +1,590 @@
+#!/usr/local/bin/perl
+
+# Normal is the
+# ripemd160_block_asm_data_order(RIPEMD160_CTX *c, ULONG *X,int blocks);
+
+$normal=0;
+
+push(@INC,"perlasm","../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],$0);
+
+$A="ecx";
+$B="esi";
+$C="edi";
+$D="ebx";
+$E="ebp";
+$tmp1="eax";
+$tmp2="edx";
+
+$KL1=0x5A827999;
+$KL2=0x6ED9EBA1;
+$KL3=0x8F1BBCDC;
+$KL4=0xA953FD4E;
+$KR0=0x50A28BE6;
+$KR1=0x5C4DD124; 
+$KR2=0x6D703EF3;
+$KR3=0x7A6D76E9;
+
+
+@wl=(	 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,
+	 7, 4,13, 1,10, 6,15, 3,12, 0, 9, 5, 2,14,11, 8,
+	 3,10,14, 4, 9,15, 8, 1, 2, 7, 0, 6,13,11, 5,12,
+	 1, 9,11,10, 0, 8,12, 4,13, 3, 7,15,14, 5, 6, 2,
+	 4, 0, 5, 9, 7,12, 2,10,14, 1, 3, 8,11, 6,15,13,
+	 );
+
+@wr=(	 5,14, 7, 0, 9, 2,11, 4,13, 6,15, 8, 1,10, 3,12,
+	 6,11, 3, 7, 0,13, 5,10,14,15, 8,12, 4, 9, 1, 2,
+	15, 5, 1, 3, 7,14, 6, 9,11, 8,12, 2,10, 0, 4,13,
+	 8, 6, 4, 1, 3,11,15, 0, 5,12, 2,13, 9, 7,10,14,
+	12,15,10, 4, 1, 5, 8, 7, 6, 2,13,14, 0, 3, 9,11,
+	);
+
+@sl=(	11,14,15,12, 5, 8, 7, 9,11,13,14,15, 6, 7, 9, 8,
+	 7, 6, 8,13,11, 9, 7,15, 7,12,15, 9,11, 7,13,12,
+	11,13, 6, 7,14, 9,13,15,14, 8,13, 6, 5,12, 7, 5,
+	11,12,14,15,14,15, 9, 8, 9,14, 5, 6, 8, 6, 5,12,
+	 9,15, 5,11, 6, 8,13,12, 5,12,13,14,11, 8, 5, 6,
+	 );
+
+@sr=(	 8, 9, 9,11,13,15,15, 5, 7, 7, 8,11,14,14,12, 6,
+	 9,13,15, 7,12, 8, 9,11, 7, 7,12, 7, 6,15,13,11,
+	 9, 7,15,11, 8, 6, 6,14,12,13, 5,14,13,13, 7, 5,
+	15, 5, 8,11,14,14, 6,14, 6, 9,12, 9,12, 5,15, 8,
+	 8, 5,12, 9,12, 5,14, 6, 8,13, 6, 5,15,13,11,11,
+ 	);
+
+&ripemd160_block("ripemd160_block_asm_data_order");
+&asm_finish();
+
+sub Xv
+	{
+	local($n)=@_;
+	return(&swtmp($n));
+	# tmp on stack
+	}
+
+sub Np
+	{
+	local($p)=@_;
+	local(%n)=($A,$E,$B,$A,$C,$B,$D,$C,$E,$D);
+	return($n{$p});
+	}
+
+sub RIP1
+	{
+	local($a,$b,$c,$d,$e,$pos,$s,$o,$pos2)=@_;
+
+	&comment($p++);
+	if ($p & 1)
+		{
+	 #&mov($tmp1,	$c) if $o == -1;
+	&xor($tmp1,	$d) if $o == -1;
+	 &mov($tmp2,	&Xv($pos));
+	&xor($tmp1,	$b);
+	 &add($a,	$tmp2);
+	&rotl($c,	10);
+	&add($a,	$tmp1);
+	 &mov($tmp1,	&Np($c));	# NEXT
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	else
+		{
+	 &xor($tmp1,	$d);
+	&mov($tmp2,	&Xv($pos));
+	 &xor($tmp1,	$b);
+	&add($a,	$tmp1);
+	 &mov($tmp1,	&Np($c)) if $o <= 0;
+	 &mov($tmp1,	-1) if $o == 1;
+	 # XXX if $o == 2;
+	&rotl($c,	10);
+	&add($a,	$tmp2);
+	 &xor($tmp1,	&Np($d)) if $o <= 0;
+	 &mov($tmp2,	&Xv($pos2)) if $o == 1;
+	 &mov($tmp2,	&wparam(0)) if $o == 2;
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	}
+
+sub RIP2
+	{
+	local($a,$b,$c,$d,$e,$pos,$pos2,$s,$K,$o)=@_;
+
+# XXXXXX
+	&comment($p++);
+	if ($p & 1)
+		{
+#	 &mov($tmp2,	&Xv($pos)) if $o < -1;
+#	&mov($tmp1,	-1) if $o < -1;
+
+	 &add($a,	$tmp2);
+	&mov($tmp2,	$c);
+	 &sub($tmp1,	$b);
+	&and($tmp2,	$b);
+	 &and($tmp1,	$d);
+	&or($tmp2,	$tmp1);
+	 &mov($tmp1,	&Xv($pos2)) if $o <= 0; # XXXXXXXXXXXXXX
+	 # XXX
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2,1));
+	 &mov($tmp2,	-1) if $o <= 0;
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	else
+		{
+	 # XXX
+	 &add($a,	$tmp1);
+	&mov($tmp1,	$c);
+	 &sub($tmp2,	$b);
+	&and($tmp1,	$b);
+	 &and($tmp2,	$d);
+	if ($o != 2)
+		{
+	&or($tmp1,	$tmp2);
+	 &mov($tmp2,	&Xv($pos2)) if $o <= 0;
+	 &mov($tmp2,	-1) if $o == 1;
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp1,1));
+	 &mov($tmp1,	-1) if $o <= 0;
+	 &sub($tmp2,	&Np($c)) if $o == 1;
+		} else {
+	&or($tmp2,	$tmp1);
+	 &mov($tmp1,	&Np($c));
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2,1));
+	 &xor($tmp1,	&Np($d));
+		}
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	}
+
+sub RIP3
+	{
+	local($a,$b,$c,$d,$e,$pos,$s,$K,$o,$pos2)=@_;
+
+	&comment($p++);
+	if ($p & 1)
+		{
+#	 &mov($tmp2,	-1) if $o < -1;
+#	&sub($tmp2,	$c) if $o < -1;
+	 &mov($tmp1,	&Xv($pos));
+	&or($tmp2,	$b);
+	 &add($a,	$tmp1);
+	&xor($tmp2,	$d);
+	 &mov($tmp1,	-1) if $o <= 0;		# NEXT
+	 # XXX
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2,1));
+	 &sub($tmp1,	&Np($c)) if $o <= 0;	# NEXT
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	else
+		{
+	 &mov($tmp2,	&Xv($pos));
+	&or($tmp1,	$b);
+	 &add($a,	$tmp2);
+	&xor($tmp1,	$d);
+	 &mov($tmp2,	-1) if $o <= 0;		# NEXT
+	 &mov($tmp2,	-1) if $o == 1;
+	 &mov($tmp2,	&Xv($pos2)) if $o == 2;
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp1,1));
+	 &sub($tmp2,	&Np($c)) if $o <= 0;	# NEXT
+	 &mov($tmp1,	&Np($d)) if $o == 1;
+	 &mov($tmp1,	-1) if $o == 2;
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	}
+
+sub RIP4
+	{
+	local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
+
+	&comment($p++);
+	if ($p & 1)
+		{
+#	 &mov($tmp2,	-1) if $o == -2;
+#	&mov($tmp1,	$d) if $o == -2;
+	 &sub($tmp2,	$d);
+	&and($tmp1,	$b);
+	 &and($tmp2,	$c);
+	&or($tmp2,	$tmp1);
+	 &mov($tmp1,	&Xv($pos));
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2));
+	 &mov($tmp2,	-1) unless $o > 0;	# NEXT
+	 # XXX
+	&add($a,	$tmp1);
+	 &mov($tmp1,	&Np($d)) unless $o > 0; # NEXT
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	else
+		{
+	 &sub($tmp2,	$d);
+	&and($tmp1,	$b);
+	 &and($tmp2,	$c);
+	&or($tmp2,	$tmp1);
+	 &mov($tmp1,	&Xv($pos));
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2));
+	 &mov($tmp2,	-1) if $o == 0;	# NEXT
+	 &mov($tmp2,	-1) if $o == 1;
+	 &mov($tmp2,	-1) if $o == 2;
+	 # XXX
+	&add($a,	$tmp1);
+	 &mov($tmp1,	&Np($d)) if $o == 0;	# NEXT
+	 &sub($tmp2,	&Np($d)) if $o == 1;
+	 &sub($tmp2,	&Np($c)) if $o == 2;
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	}
+
+sub RIP5
+	{
+	local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
+
+	&comment($p++);
+	if ($p & 1)
+		{
+	 &mov($tmp2,	-1) if $o == -2;
+	&sub($tmp2,	$d) if $o == -2;
+	 &mov($tmp1,	&Xv($pos));
+	&or($tmp2,	$c);
+	 &add($a,	$tmp1);
+	&xor($tmp2,	$b);
+	 &mov($tmp1,	-1) if $o <= 0;
+	 # XXX
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp2,1));
+	 &sub($tmp1,	&Np($d)) if $o <= 0;
+	 # XXX
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	else
+		{
+	 &mov($tmp2,	&Xv($pos));
+	&or($tmp1,	$c);
+	 &add($a,	$tmp2);
+	&xor($tmp1,	$b);
+	 &mov($tmp2,	-1) if $o <= 0;
+	 &mov($tmp2,	&wparam(0)) if $o == 1;	# Middle code
+	 &mov($tmp2,	-1) if $o == 2;
+	&rotl($c,	10);
+	&lea($a,	&DWP($K,$a,$tmp1,1));
+	 &sub($tmp2,	&Np($d)) if $o <= 0;
+	 &mov(&swtmp(16),	$A) if $o == 1;
+	 &mov($tmp1,	&Np($d)) if $o == 2;
+	&rotl($a,	$s);
+	&add($a,	$e);
+		}
+	}
+
+sub ripemd160_block
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,"",3);
+
+	# parameter 1 is the RIPEMD160_CTX structure.
+	# A	0
+	# B	4
+	# C	8
+	# D 	12
+	# E 	16
+
+	&mov($tmp2,	&wparam(0));
+	 &mov($tmp1,	&wparam(1));
+	&push("esi");
+	 &mov($A,	&DWP( 0,$tmp2,"",0));
+	&push("edi");
+	 &mov($B,	&DWP( 4,$tmp2,"",0));
+	&push("ebp");
+	 &mov($C,	&DWP( 8,$tmp2,"",0));
+	&push("ebx");
+	 &stack_push(16+5+6);
+			  # Special comment about the figure of 6.
+			  # Idea is to pad the current frame so
+			  # that the top of the stack gets fairly
+			  # aligned. Well, as you realize it would
+			  # always depend on how the frame below is
+			  # aligned. The good news are that gcc-2.95
+			  # and later does keep first argument at
+			  # least double-wise aligned.
+			  #			<appro@fy.chalmers.se>
+
+	&set_label("start") unless $normal;
+	&comment("");
+
+	# &mov($tmp1,	&wparam(1)); # Done at end of loop
+	# &mov($tmp2,	&wparam(0)); # Done at end of loop
+
+	for ($z=0; $z<16; $z+=2)
+		{
+		&mov($D,		&DWP( $z*4,$tmp1,"",0));
+		 &mov($E,		&DWP( ($z+1)*4,$tmp1,"",0));
+		&mov(&swtmp($z),	$D);
+		 &mov(&swtmp($z+1),	$E);
+		}
+	&mov($tmp1,	$C);
+	 &mov($D,	&DWP(12,$tmp2,"",0));
+	&mov($E,	&DWP(16,$tmp2,"",0));
+
+	&RIP1($A,$B,$C,$D,$E,$wl[ 0],$sl[ 0],-1);
+	&RIP1($E,$A,$B,$C,$D,$wl[ 1],$sl[ 1],0);
+	&RIP1($D,$E,$A,$B,$C,$wl[ 2],$sl[ 2],0);
+	&RIP1($C,$D,$E,$A,$B,$wl[ 3],$sl[ 3],0);
+	&RIP1($B,$C,$D,$E,$A,$wl[ 4],$sl[ 4],0);
+	&RIP1($A,$B,$C,$D,$E,$wl[ 5],$sl[ 5],0);
+	&RIP1($E,$A,$B,$C,$D,$wl[ 6],$sl[ 6],0);
+	&RIP1($D,$E,$A,$B,$C,$wl[ 7],$sl[ 7],0);
+	&RIP1($C,$D,$E,$A,$B,$wl[ 8],$sl[ 8],0);
+	&RIP1($B,$C,$D,$E,$A,$wl[ 9],$sl[ 9],0);
+	&RIP1($A,$B,$C,$D,$E,$wl[10],$sl[10],0);
+	&RIP1($E,$A,$B,$C,$D,$wl[11],$sl[11],0);
+	&RIP1($D,$E,$A,$B,$C,$wl[12],$sl[12],0);
+	&RIP1($C,$D,$E,$A,$B,$wl[13],$sl[13],0);
+	&RIP1($B,$C,$D,$E,$A,$wl[14],$sl[14],0);
+	&RIP1($A,$B,$C,$D,$E,$wl[15],$sl[15],1,$wl[16]);
+
+	&RIP2($E,$A,$B,$C,$D,$wl[16],$wl[17],$sl[16],$KL1,-1);
+	&RIP2($D,$E,$A,$B,$C,$wl[17],$wl[18],$sl[17],$KL1,0);
+	&RIP2($C,$D,$E,$A,$B,$wl[18],$wl[19],$sl[18],$KL1,0);
+	&RIP2($B,$C,$D,$E,$A,$wl[19],$wl[20],$sl[19],$KL1,0);
+	&RIP2($A,$B,$C,$D,$E,$wl[20],$wl[21],$sl[20],$KL1,0);
+	&RIP2($E,$A,$B,$C,$D,$wl[21],$wl[22],$sl[21],$KL1,0);
+	&RIP2($D,$E,$A,$B,$C,$wl[22],$wl[23],$sl[22],$KL1,0);
+	&RIP2($C,$D,$E,$A,$B,$wl[23],$wl[24],$sl[23],$KL1,0);
+	&RIP2($B,$C,$D,$E,$A,$wl[24],$wl[25],$sl[24],$KL1,0);
+	&RIP2($A,$B,$C,$D,$E,$wl[25],$wl[26],$sl[25],$KL1,0);
+	&RIP2($E,$A,$B,$C,$D,$wl[26],$wl[27],$sl[26],$KL1,0);
+	&RIP2($D,$E,$A,$B,$C,$wl[27],$wl[28],$sl[27],$KL1,0);
+	&RIP2($C,$D,$E,$A,$B,$wl[28],$wl[29],$sl[28],$KL1,0);
+	&RIP2($B,$C,$D,$E,$A,$wl[29],$wl[30],$sl[29],$KL1,0);
+	&RIP2($A,$B,$C,$D,$E,$wl[30],$wl[31],$sl[30],$KL1,0);
+	&RIP2($E,$A,$B,$C,$D,$wl[31],$wl[32],$sl[31],$KL1,1);
+
+	&RIP3($D,$E,$A,$B,$C,$wl[32],$sl[32],$KL2,-1);
+	&RIP3($C,$D,$E,$A,$B,$wl[33],$sl[33],$KL2,0);
+	&RIP3($B,$C,$D,$E,$A,$wl[34],$sl[34],$KL2,0);
+	&RIP3($A,$B,$C,$D,$E,$wl[35],$sl[35],$KL2,0);
+	&RIP3($E,$A,$B,$C,$D,$wl[36],$sl[36],$KL2,0);
+	&RIP3($D,$E,$A,$B,$C,$wl[37],$sl[37],$KL2,0);
+	&RIP3($C,$D,$E,$A,$B,$wl[38],$sl[38],$KL2,0);
+	&RIP3($B,$C,$D,$E,$A,$wl[39],$sl[39],$KL2,0);
+	&RIP3($A,$B,$C,$D,$E,$wl[40],$sl[40],$KL2,0);
+	&RIP3($E,$A,$B,$C,$D,$wl[41],$sl[41],$KL2,0);
+	&RIP3($D,$E,$A,$B,$C,$wl[42],$sl[42],$KL2,0);
+	&RIP3($C,$D,$E,$A,$B,$wl[43],$sl[43],$KL2,0);
+	&RIP3($B,$C,$D,$E,$A,$wl[44],$sl[44],$KL2,0);
+	&RIP3($A,$B,$C,$D,$E,$wl[45],$sl[45],$KL2,0);
+	&RIP3($E,$A,$B,$C,$D,$wl[46],$sl[46],$KL2,0);
+	&RIP3($D,$E,$A,$B,$C,$wl[47],$sl[47],$KL2,1);
+
+	&RIP4($C,$D,$E,$A,$B,$wl[48],$sl[48],$KL3,-1);
+	&RIP4($B,$C,$D,$E,$A,$wl[49],$sl[49],$KL3,0);
+	&RIP4($A,$B,$C,$D,$E,$wl[50],$sl[50],$KL3,0);
+	&RIP4($E,$A,$B,$C,$D,$wl[51],$sl[51],$KL3,0);
+	&RIP4($D,$E,$A,$B,$C,$wl[52],$sl[52],$KL3,0);
+	&RIP4($C,$D,$E,$A,$B,$wl[53],$sl[53],$KL3,0);
+	&RIP4($B,$C,$D,$E,$A,$wl[54],$sl[54],$KL3,0);
+	&RIP4($A,$B,$C,$D,$E,$wl[55],$sl[55],$KL3,0);
+	&RIP4($E,$A,$B,$C,$D,$wl[56],$sl[56],$KL3,0);
+	&RIP4($D,$E,$A,$B,$C,$wl[57],$sl[57],$KL3,0);
+	&RIP4($C,$D,$E,$A,$B,$wl[58],$sl[58],$KL3,0);
+	&RIP4($B,$C,$D,$E,$A,$wl[59],$sl[59],$KL3,0);
+	&RIP4($A,$B,$C,$D,$E,$wl[60],$sl[60],$KL3,0);
+	&RIP4($E,$A,$B,$C,$D,$wl[61],$sl[61],$KL3,0);
+	&RIP4($D,$E,$A,$B,$C,$wl[62],$sl[62],$KL3,0);
+	&RIP4($C,$D,$E,$A,$B,$wl[63],$sl[63],$KL3,1);
+
+	&RIP5($B,$C,$D,$E,$A,$wl[64],$sl[64],$KL4,-1);
+	&RIP5($A,$B,$C,$D,$E,$wl[65],$sl[65],$KL4,0);
+	&RIP5($E,$A,$B,$C,$D,$wl[66],$sl[66],$KL4,0);
+	&RIP5($D,$E,$A,$B,$C,$wl[67],$sl[67],$KL4,0);
+	&RIP5($C,$D,$E,$A,$B,$wl[68],$sl[68],$KL4,0);
+	&RIP5($B,$C,$D,$E,$A,$wl[69],$sl[69],$KL4,0);
+	&RIP5($A,$B,$C,$D,$E,$wl[70],$sl[70],$KL4,0);
+	&RIP5($E,$A,$B,$C,$D,$wl[71],$sl[71],$KL4,0);
+	&RIP5($D,$E,$A,$B,$C,$wl[72],$sl[72],$KL4,0);
+	&RIP5($C,$D,$E,$A,$B,$wl[73],$sl[73],$KL4,0);
+	&RIP5($B,$C,$D,$E,$A,$wl[74],$sl[74],$KL4,0);
+	&RIP5($A,$B,$C,$D,$E,$wl[75],$sl[75],$KL4,0);
+	&RIP5($E,$A,$B,$C,$D,$wl[76],$sl[76],$KL4,0);
+	&RIP5($D,$E,$A,$B,$C,$wl[77],$sl[77],$KL4,0);
+	&RIP5($C,$D,$E,$A,$B,$wl[78],$sl[78],$KL4,0);
+	&RIP5($B,$C,$D,$E,$A,$wl[79],$sl[79],$KL4,1);
+
+	# &mov($tmp2,	&wparam(0)); # moved into last RIP5
+	# &mov(&swtmp(16),	$A);
+	 &mov($A,	&DWP( 0,$tmp2,"",0));
+	&mov(&swtmp(16+1),	$B);
+	 &mov(&swtmp(16+2),	$C);
+	&mov($B,	&DWP( 4,$tmp2,"",0));
+	 &mov(&swtmp(16+3),	$D);
+	&mov($C,	&DWP( 8,$tmp2,"",0));
+	 &mov(&swtmp(16+4),	$E);
+	&mov($D,	&DWP(12,$tmp2,"",0));
+	 &mov($E,	&DWP(16,$tmp2,"",0));
+
+	&RIP5($A,$B,$C,$D,$E,$wr[ 0],$sr[ 0],$KR0,-2);
+	&RIP5($E,$A,$B,$C,$D,$wr[ 1],$sr[ 1],$KR0,0);
+	&RIP5($D,$E,$A,$B,$C,$wr[ 2],$sr[ 2],$KR0,0);
+	&RIP5($C,$D,$E,$A,$B,$wr[ 3],$sr[ 3],$KR0,0);
+	&RIP5($B,$C,$D,$E,$A,$wr[ 4],$sr[ 4],$KR0,0);
+	&RIP5($A,$B,$C,$D,$E,$wr[ 5],$sr[ 5],$KR0,0);
+	&RIP5($E,$A,$B,$C,$D,$wr[ 6],$sr[ 6],$KR0,0);
+	&RIP5($D,$E,$A,$B,$C,$wr[ 7],$sr[ 7],$KR0,0);
+	&RIP5($C,$D,$E,$A,$B,$wr[ 8],$sr[ 8],$KR0,0);
+	&RIP5($B,$C,$D,$E,$A,$wr[ 9],$sr[ 9],$KR0,0);
+	&RIP5($A,$B,$C,$D,$E,$wr[10],$sr[10],$KR0,0);
+	&RIP5($E,$A,$B,$C,$D,$wr[11],$sr[11],$KR0,0);
+	&RIP5($D,$E,$A,$B,$C,$wr[12],$sr[12],$KR0,0);
+	&RIP5($C,$D,$E,$A,$B,$wr[13],$sr[13],$KR0,0);
+	&RIP5($B,$C,$D,$E,$A,$wr[14],$sr[14],$KR0,0);
+	&RIP5($A,$B,$C,$D,$E,$wr[15],$sr[15],$KR0,2);
+
+	&RIP4($E,$A,$B,$C,$D,$wr[16],$sr[16],$KR1,-2);
+	&RIP4($D,$E,$A,$B,$C,$wr[17],$sr[17],$KR1,0);
+	&RIP4($C,$D,$E,$A,$B,$wr[18],$sr[18],$KR1,0);
+	&RIP4($B,$C,$D,$E,$A,$wr[19],$sr[19],$KR1,0);
+	&RIP4($A,$B,$C,$D,$E,$wr[20],$sr[20],$KR1,0);
+	&RIP4($E,$A,$B,$C,$D,$wr[21],$sr[21],$KR1,0);
+	&RIP4($D,$E,$A,$B,$C,$wr[22],$sr[22],$KR1,0);
+	&RIP4($C,$D,$E,$A,$B,$wr[23],$sr[23],$KR1,0);
+	&RIP4($B,$C,$D,$E,$A,$wr[24],$sr[24],$KR1,0);
+	&RIP4($A,$B,$C,$D,$E,$wr[25],$sr[25],$KR1,0);
+	&RIP4($E,$A,$B,$C,$D,$wr[26],$sr[26],$KR1,0);
+	&RIP4($D,$E,$A,$B,$C,$wr[27],$sr[27],$KR1,0);
+	&RIP4($C,$D,$E,$A,$B,$wr[28],$sr[28],$KR1,0);
+	&RIP4($B,$C,$D,$E,$A,$wr[29],$sr[29],$KR1,0);
+	&RIP4($A,$B,$C,$D,$E,$wr[30],$sr[30],$KR1,0);
+	&RIP4($E,$A,$B,$C,$D,$wr[31],$sr[31],$KR1,2);
+
+	&RIP3($D,$E,$A,$B,$C,$wr[32],$sr[32],$KR2,-2);
+	&RIP3($C,$D,$E,$A,$B,$wr[33],$sr[33],$KR2,0);
+	&RIP3($B,$C,$D,$E,$A,$wr[34],$sr[34],$KR2,0);
+	&RIP3($A,$B,$C,$D,$E,$wr[35],$sr[35],$KR2,0);
+	&RIP3($E,$A,$B,$C,$D,$wr[36],$sr[36],$KR2,0);
+	&RIP3($D,$E,$A,$B,$C,$wr[37],$sr[37],$KR2,0);
+	&RIP3($C,$D,$E,$A,$B,$wr[38],$sr[38],$KR2,0);
+	&RIP3($B,$C,$D,$E,$A,$wr[39],$sr[39],$KR2,0);
+	&RIP3($A,$B,$C,$D,$E,$wr[40],$sr[40],$KR2,0);
+	&RIP3($E,$A,$B,$C,$D,$wr[41],$sr[41],$KR2,0);
+	&RIP3($D,$E,$A,$B,$C,$wr[42],$sr[42],$KR2,0);
+	&RIP3($C,$D,$E,$A,$B,$wr[43],$sr[43],$KR2,0);
+	&RIP3($B,$C,$D,$E,$A,$wr[44],$sr[44],$KR2,0);
+	&RIP3($A,$B,$C,$D,$E,$wr[45],$sr[45],$KR2,0);
+	&RIP3($E,$A,$B,$C,$D,$wr[46],$sr[46],$KR2,0);
+	&RIP3($D,$E,$A,$B,$C,$wr[47],$sr[47],$KR2,2,$wr[48]);
+
+	&RIP2($C,$D,$E,$A,$B,$wr[48],$wr[49],$sr[48],$KR3,-2);
+	&RIP2($B,$C,$D,$E,$A,$wr[49],$wr[50],$sr[49],$KR3,0);
+	&RIP2($A,$B,$C,$D,$E,$wr[50],$wr[51],$sr[50],$KR3,0);
+	&RIP2($E,$A,$B,$C,$D,$wr[51],$wr[52],$sr[51],$KR3,0);
+	&RIP2($D,$E,$A,$B,$C,$wr[52],$wr[53],$sr[52],$KR3,0);
+	&RIP2($C,$D,$E,$A,$B,$wr[53],$wr[54],$sr[53],$KR3,0);
+	&RIP2($B,$C,$D,$E,$A,$wr[54],$wr[55],$sr[54],$KR3,0);
+	&RIP2($A,$B,$C,$D,$E,$wr[55],$wr[56],$sr[55],$KR3,0);
+	&RIP2($E,$A,$B,$C,$D,$wr[56],$wr[57],$sr[56],$KR3,0);
+	&RIP2($D,$E,$A,$B,$C,$wr[57],$wr[58],$sr[57],$KR3,0);
+	&RIP2($C,$D,$E,$A,$B,$wr[58],$wr[59],$sr[58],$KR3,0);
+	&RIP2($B,$C,$D,$E,$A,$wr[59],$wr[60],$sr[59],$KR3,0);
+	&RIP2($A,$B,$C,$D,$E,$wr[60],$wr[61],$sr[60],$KR3,0);
+	&RIP2($E,$A,$B,$C,$D,$wr[61],$wr[62],$sr[61],$KR3,0);
+	&RIP2($D,$E,$A,$B,$C,$wr[62],$wr[63],$sr[62],$KR3,0);
+	&RIP2($C,$D,$E,$A,$B,$wr[63],$wr[64],$sr[63],$KR3,2);
+
+	&RIP1($B,$C,$D,$E,$A,$wr[64],$sr[64],-2);
+	&RIP1($A,$B,$C,$D,$E,$wr[65],$sr[65],0);
+	&RIP1($E,$A,$B,$C,$D,$wr[66],$sr[66],0);
+	&RIP1($D,$E,$A,$B,$C,$wr[67],$sr[67],0);
+	&RIP1($C,$D,$E,$A,$B,$wr[68],$sr[68],0);
+	&RIP1($B,$C,$D,$E,$A,$wr[69],$sr[69],0);
+	&RIP1($A,$B,$C,$D,$E,$wr[70],$sr[70],0);
+	&RIP1($E,$A,$B,$C,$D,$wr[71],$sr[71],0);
+	&RIP1($D,$E,$A,$B,$C,$wr[72],$sr[72],0);
+	&RIP1($C,$D,$E,$A,$B,$wr[73],$sr[73],0);
+	&RIP1($B,$C,$D,$E,$A,$wr[74],$sr[74],0);
+	&RIP1($A,$B,$C,$D,$E,$wr[75],$sr[75],0);
+	&RIP1($E,$A,$B,$C,$D,$wr[76],$sr[76],0);
+	&RIP1($D,$E,$A,$B,$C,$wr[77],$sr[77],0);
+	&RIP1($C,$D,$E,$A,$B,$wr[78],$sr[78],0);
+	&RIP1($B,$C,$D,$E,$A,$wr[79],$sr[79],2);
+
+	# &mov($tmp2,	&wparam(0)); # Moved into last round
+
+	 &mov($tmp1,	&DWP( 4,$tmp2,"",0));	# ctx->B
+ 	&add($D,	$tmp1);	
+	 &mov($tmp1,	&swtmp(16+2));		# $c
+	&add($D,	$tmp1);
+
+	 &mov($tmp1,	&DWP( 8,$tmp2,"",0));	# ctx->C
+	&add($E,	$tmp1);	
+	 &mov($tmp1,	&swtmp(16+3));		# $d
+	&add($E,	$tmp1);
+
+	 &mov($tmp1,	&DWP(12,$tmp2,"",0));	# ctx->D
+	&add($A,	$tmp1);	
+	 &mov($tmp1,	&swtmp(16+4));		# $e
+	&add($A,	$tmp1);
+
+
+	 &mov($tmp1,	&DWP(16,$tmp2,"",0));	# ctx->E
+	&add($B,	$tmp1);	
+	 &mov($tmp1,	&swtmp(16+0));		# $a
+	&add($B,	$tmp1);
+
+	 &mov($tmp1,	&DWP( 0,$tmp2,"",0));	# ctx->A
+	&add($C,	$tmp1);	
+	 &mov($tmp1,	&swtmp(16+1));		# $b
+	&add($C,	$tmp1);
+
+	 &mov($tmp1,	&wparam(2));
+
+	&mov(&DWP( 0,$tmp2,"",0),	$D);
+	 &mov(&DWP( 4,$tmp2,"",0),	$E);
+	&mov(&DWP( 8,$tmp2,"",0),	$A);
+	 &sub($tmp1,1);
+	&mov(&DWP(12,$tmp2,"",0),	$B);
+	 &mov(&DWP(16,$tmp2,"",0),	$C);
+
+	&jle(&label("get_out"));
+
+	&mov(&wparam(2),$tmp1);
+	 &mov($C,	$A);
+	&mov($tmp1,	&wparam(1));
+	 &mov($A,	$D);
+	&add($tmp1,	64);
+	 &mov($B,	$E);
+	&mov(&wparam(1),$tmp1);
+
+	&jmp(&label("start"));
+
+	&set_label("get_out");
+
+	&stack_pop(16+5+6);
+
+	&pop("ebx");
+	&pop("ebp");
+	&pop("edi");
+	&pop("esi");
+	&ret();
+	&function_end_B($name);
+	}
+
diff --git a/openssl/crypto/ripemd/ripemd.h b/openssl/crypto/ripemd/ripemd.h
new file mode 100644
index 000000000..3b6d04386
--- /dev/null
+++ b/openssl/crypto/ripemd/ripemd.h
@@ -0,0 +1,106 @@
+/* crypto/ripemd/ripemd.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#ifndef HEADER_RIPEMD_H
+#define HEADER_RIPEMD_H
+
+#include <openssl/e_os2.h>
+#include <stddef.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+#ifdef OPENSSL_NO_RIPEMD
+#error RIPEMD is disabled.
+#endif
+
+#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
+#define RIPEMD160_LONG unsigned long
+#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
+#define RIPEMD160_LONG unsigned long
+#define RIPEMD160_LONG_LOG2 3
+#else
+#define RIPEMD160_LONG unsigned int
+#endif
+
+#define RIPEMD160_CBLOCK	64
+#define RIPEMD160_LBLOCK	(RIPEMD160_CBLOCK/4)
+#define RIPEMD160_DIGEST_LENGTH	20
+
+typedef struct RIPEMD160state_st
+	{
+	RIPEMD160_LONG A,B,C,D,E;
+	RIPEMD160_LONG Nl,Nh;
+	RIPEMD160_LONG data[RIPEMD160_LBLOCK];
+	unsigned int   num;
+	} RIPEMD160_CTX;
+#ifdef OPENSSL_FIPS
+int private_RIPEMD160_Init(RIPEMD160_CTX *c);
+#endif
+int RIPEMD160_Init(RIPEMD160_CTX *c);
+int RIPEMD160_Update(RIPEMD160_CTX *c, const void *data, size_t len);
+int RIPEMD160_Final(unsigned char *md, RIPEMD160_CTX *c);
+unsigned char *RIPEMD160(const unsigned char *d, size_t n,
+	unsigned char *md);
+void RIPEMD160_Transform(RIPEMD160_CTX *c, const unsigned char *b);
+#ifdef  __cplusplus
+}
+#endif
+
+#endif
diff --git a/openssl/crypto/ripemd/rmd160.c b/openssl/crypto/ripemd/rmd160.c
new file mode 100644
index 000000000..b0ec57449
--- /dev/null
+++ b/openssl/crypto/ripemd/rmd160.c
@@ -0,0 +1,127 @@
+/* crypto/ripemd/rmd160.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <openssl/ripemd.h>
+
+#define BUFSIZE	1024*16
+
+void do_fp(FILE *f);
+void pt(unsigned char *md);
+#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
+int read(int, void *, unsigned int);
+#endif
+
+int main(int argc, char **argv)
+	{
+	int i,err=0;
+	FILE *IN;
+
+	if (argc == 1)
+		{
+		do_fp(stdin);
+		}
+	else
+		{
+		for (i=1; i<argc; i++)
+			{
+			IN=fopen(argv[i],"r");
+			if (IN == NULL)
+				{
+				perror(argv[i]);
+				err++;
+				continue;
+				}
+			printf("RIPEMD160(%s)= ",argv[i]);
+			do_fp(IN);
+			fclose(IN);
+			}
+		}
+	exit(err);
+	}
+
+void do_fp(FILE *f)
+	{
+	RIPEMD160_CTX c;
+	unsigned char md[RIPEMD160_DIGEST_LENGTH];
+	int fd;
+	int i;
+	static unsigned char buf[BUFSIZE];
+
+	fd=fileno(f);
+	RIPEMD160_Init(&c);
+	for (;;)
+		{
+		i=read(fd,buf,BUFSIZE);
+		if (i <= 0) break;
+		RIPEMD160_Update(&c,buf,(unsigned long)i);
+		}
+	RIPEMD160_Final(&(md[0]),&c);
+	pt(md);
+	}
+
+void pt(unsigned char *md)
+	{
+	int i;
+
+	for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
+		printf("%02x",md[i]);
+	printf("\n");
+	}
+
diff --git a/openssl/crypto/ripemd/rmd_dgst.c b/openssl/crypto/ripemd/rmd_dgst.c
new file mode 100644
index 000000000..ead11d075
--- /dev/null
+++ b/openssl/crypto/ripemd/rmd_dgst.c
@@ -0,0 +1,298 @@
+/* crypto/ripemd/rmd_dgst.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include "rmd_locl.h"
+#include <openssl/opensslv.h>
+#include <openssl/err.h>
+#ifdef OPENSSL_FIPS
+#include <openssl/fips.h>
+#endif
+
+
+const char RMD160_version[]="RIPE-MD160" OPENSSL_VERSION_PTEXT;
+
+#  ifdef RMD160_ASM
+     void ripemd160_block_x86(RIPEMD160_CTX *c, unsigned long *p,size_t num);
+#    define ripemd160_block ripemd160_block_x86
+#  else
+     void ripemd160_block(RIPEMD160_CTX *c, unsigned long *p,size_t num);
+#  endif
+
+FIPS_NON_FIPS_MD_Init(RIPEMD160)
+	{
+	c->A=RIPEMD160_A;
+	c->B=RIPEMD160_B;
+	c->C=RIPEMD160_C;
+	c->D=RIPEMD160_D;
+	c->E=RIPEMD160_E;
+	c->Nl=0;
+	c->Nh=0;
+	c->num=0;
+	return 1;
+	}
+
+#ifndef ripemd160_block_data_order
+#ifdef X
+#undef X
+#endif
+void ripemd160_block_data_order (RIPEMD160_CTX *ctx, const void *p, size_t num)
+	{
+	const unsigned char *data=p;
+	register unsigned MD32_REG_T A,B,C,D,E;
+	unsigned MD32_REG_T a,b,c,d,e,l;
+#ifndef MD32_XARRAY
+	/* See comment in crypto/sha/sha_locl.h for details. */
+	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
+				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
+# define X(i)	XX##i
+#else
+	RIPEMD160_LONG	XX[16];
+# define X(i)	XX[i]
+#endif
+
+	for (;num--;)
+		{
+
+	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
+
+	HOST_c2l(data,l); X( 0)=l;	HOST_c2l(data,l); X( 1)=l;
+	RIP1(A,B,C,D,E,WL00,SL00);	HOST_c2l(data,l); X( 2)=l;
+	RIP1(E,A,B,C,D,WL01,SL01);	HOST_c2l(data,l); X( 3)=l;
+	RIP1(D,E,A,B,C,WL02,SL02);	HOST_c2l(data,l); X( 4)=l;
+	RIP1(C,D,E,A,B,WL03,SL03);	HOST_c2l(data,l); X( 5)=l;
+	RIP1(B,C,D,E,A,WL04,SL04);	HOST_c2l(data,l); X( 6)=l;
+	RIP1(A,B,C,D,E,WL05,SL05);	HOST_c2l(data,l); X( 7)=l;
+	RIP1(E,A,B,C,D,WL06,SL06);	HOST_c2l(data,l); X( 8)=l;
+	RIP1(D,E,A,B,C,WL07,SL07);	HOST_c2l(data,l); X( 9)=l;
+	RIP1(C,D,E,A,B,WL08,SL08);	HOST_c2l(data,l); X(10)=l;
+	RIP1(B,C,D,E,A,WL09,SL09);	HOST_c2l(data,l); X(11)=l;
+	RIP1(A,B,C,D,E,WL10,SL10);	HOST_c2l(data,l); X(12)=l;
+	RIP1(E,A,B,C,D,WL11,SL11);	HOST_c2l(data,l); X(13)=l;
+	RIP1(D,E,A,B,C,WL12,SL12);	HOST_c2l(data,l); X(14)=l;
+	RIP1(C,D,E,A,B,WL13,SL13);	HOST_c2l(data,l); X(15)=l;
+	RIP1(B,C,D,E,A,WL14,SL14);
+	RIP1(A,B,C,D,E,WL15,SL15);
+
+	RIP2(E,A,B,C,D,WL16,SL16,KL1);
+	RIP2(D,E,A,B,C,WL17,SL17,KL1);
+	RIP2(C,D,E,A,B,WL18,SL18,KL1);
+	RIP2(B,C,D,E,A,WL19,SL19,KL1);
+	RIP2(A,B,C,D,E,WL20,SL20,KL1);
+	RIP2(E,A,B,C,D,WL21,SL21,KL1);
+	RIP2(D,E,A,B,C,WL22,SL22,KL1);
+	RIP2(C,D,E,A,B,WL23,SL23,KL1);
+	RIP2(B,C,D,E,A,WL24,SL24,KL1);
+	RIP2(A,B,C,D,E,WL25,SL25,KL1);
+	RIP2(E,A,B,C,D,WL26,SL26,KL1);
+	RIP2(D,E,A,B,C,WL27,SL27,KL1);
+	RIP2(C,D,E,A,B,WL28,SL28,KL1);
+	RIP2(B,C,D,E,A,WL29,SL29,KL1);
+	RIP2(A,B,C,D,E,WL30,SL30,KL1);
+	RIP2(E,A,B,C,D,WL31,SL31,KL1);
+
+	RIP3(D,E,A,B,C,WL32,SL32,KL2);
+	RIP3(C,D,E,A,B,WL33,SL33,KL2);
+	RIP3(B,C,D,E,A,WL34,SL34,KL2);
+	RIP3(A,B,C,D,E,WL35,SL35,KL2);
+	RIP3(E,A,B,C,D,WL36,SL36,KL2);
+	RIP3(D,E,A,B,C,WL37,SL37,KL2);
+	RIP3(C,D,E,A,B,WL38,SL38,KL2);
+	RIP3(B,C,D,E,A,WL39,SL39,KL2);
+	RIP3(A,B,C,D,E,WL40,SL40,KL2);
+	RIP3(E,A,B,C,D,WL41,SL41,KL2);
+	RIP3(D,E,A,B,C,WL42,SL42,KL2);
+	RIP3(C,D,E,A,B,WL43,SL43,KL2);
+	RIP3(B,C,D,E,A,WL44,SL44,KL2);
+	RIP3(A,B,C,D,E,WL45,SL45,KL2);
+	RIP3(E,A,B,C,D,WL46,SL46,KL2);
+	RIP3(D,E,A,B,C,WL47,SL47,KL2);
+
+	RIP4(C,D,E,A,B,WL48,SL48,KL3);
+	RIP4(B,C,D,E,A,WL49,SL49,KL3);
+	RIP4(A,B,C,D,E,WL50,SL50,KL3);
+	RIP4(E,A,B,C,D,WL51,SL51,KL3);
+	RIP4(D,E,A,B,C,WL52,SL52,KL3);
+	RIP4(C,D,E,A,B,WL53,SL53,KL3);
+	RIP4(B,C,D,E,A,WL54,SL54,KL3);
+	RIP4(A,B,C,D,E,WL55,SL55,KL3);
+	RIP4(E,A,B,C,D,WL56,SL56,KL3);
+	RIP4(D,E,A,B,C,WL57,SL57,KL3);
+	RIP4(C,D,E,A,B,WL58,SL58,KL3);
+	RIP4(B,C,D,E,A,WL59,SL59,KL3);
+	RIP4(A,B,C,D,E,WL60,SL60,KL3);
+	RIP4(E,A,B,C,D,WL61,SL61,KL3);
+	RIP4(D,E,A,B,C,WL62,SL62,KL3);
+	RIP4(C,D,E,A,B,WL63,SL63,KL3);
+
+	RIP5(B,C,D,E,A,WL64,SL64,KL4);
+	RIP5(A,B,C,D,E,WL65,SL65,KL4);
+	RIP5(E,A,B,C,D,WL66,SL66,KL4);
+	RIP5(D,E,A,B,C,WL67,SL67,KL4);
+	RIP5(C,D,E,A,B,WL68,SL68,KL4);
+	RIP5(B,C,D,E,A,WL69,SL69,KL4);
+	RIP5(A,B,C,D,E,WL70,SL70,KL4);
+	RIP5(E,A,B,C,D,WL71,SL71,KL4);
+	RIP5(D,E,A,B,C,WL72,SL72,KL4);
+	RIP5(C,D,E,A,B,WL73,SL73,KL4);
+	RIP5(B,C,D,E,A,WL74,SL74,KL4);
+	RIP5(A,B,C,D,E,WL75,SL75,KL4);
+	RIP5(E,A,B,C,D,WL76,SL76,KL4);
+	RIP5(D,E,A,B,C,WL77,SL77,KL4);
+	RIP5(C,D,E,A,B,WL78,SL78,KL4);
+	RIP5(B,C,D,E,A,WL79,SL79,KL4);
+
+	a=A; b=B; c=C; d=D; e=E;
+	/* Do other half */
+	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
+
+	RIP5(A,B,C,D,E,WR00,SR00,KR0);
+	RIP5(E,A,B,C,D,WR01,SR01,KR0);
+	RIP5(D,E,A,B,C,WR02,SR02,KR0);
+	RIP5(C,D,E,A,B,WR03,SR03,KR0);
+	RIP5(B,C,D,E,A,WR04,SR04,KR0);
+	RIP5(A,B,C,D,E,WR05,SR05,KR0);
+	RIP5(E,A,B,C,D,WR06,SR06,KR0);
+	RIP5(D,E,A,B,C,WR07,SR07,KR0);
+	RIP5(C,D,E,A,B,WR08,SR08,KR0);
+	RIP5(B,C,D,E,A,WR09,SR09,KR0);
+	RIP5(A,B,C,D,E,WR10,SR10,KR0);
+	RIP5(E,A,B,C,D,WR11,SR11,KR0);
+	RIP5(D,E,A,B,C,WR12,SR12,KR0);
+	RIP5(C,D,E,A,B,WR13,SR13,KR0);
+	RIP5(B,C,D,E,A,WR14,SR14,KR0);
+	RIP5(A,B,C,D,E,WR15,SR15,KR0);
+
+	RIP4(E,A,B,C,D,WR16,SR16,KR1);
+	RIP4(D,E,A,B,C,WR17,SR17,KR1);
+	RIP4(C,D,E,A,B,WR18,SR18,KR1);
+	RIP4(B,C,D,E,A,WR19,SR19,KR1);
+	RIP4(A,B,C,D,E,WR20,SR20,KR1);
+	RIP4(E,A,B,C,D,WR21,SR21,KR1);
+	RIP4(D,E,A,B,C,WR22,SR22,KR1);
+	RIP4(C,D,E,A,B,WR23,SR23,KR1);
+	RIP4(B,C,D,E,A,WR24,SR24,KR1);
+	RIP4(A,B,C,D,E,WR25,SR25,KR1);
+	RIP4(E,A,B,C,D,WR26,SR26,KR1);
+	RIP4(D,E,A,B,C,WR27,SR27,KR1);
+	RIP4(C,D,E,A,B,WR28,SR28,KR1);
+	RIP4(B,C,D,E,A,WR29,SR29,KR1);
+	RIP4(A,B,C,D,E,WR30,SR30,KR1);
+	RIP4(E,A,B,C,D,WR31,SR31,KR1);
+
+	RIP3(D,E,A,B,C,WR32,SR32,KR2);
+	RIP3(C,D,E,A,B,WR33,SR33,KR2);
+	RIP3(B,C,D,E,A,WR34,SR34,KR2);
+	RIP3(A,B,C,D,E,WR35,SR35,KR2);
+	RIP3(E,A,B,C,D,WR36,SR36,KR2);
+	RIP3(D,E,A,B,C,WR37,SR37,KR2);
+	RIP3(C,D,E,A,B,WR38,SR38,KR2);
+	RIP3(B,C,D,E,A,WR39,SR39,KR2);
+	RIP3(A,B,C,D,E,WR40,SR40,KR2);
+	RIP3(E,A,B,C,D,WR41,SR41,KR2);
+	RIP3(D,E,A,B,C,WR42,SR42,KR2);
+	RIP3(C,D,E,A,B,WR43,SR43,KR2);
+	RIP3(B,C,D,E,A,WR44,SR44,KR2);
+	RIP3(A,B,C,D,E,WR45,SR45,KR2);
+	RIP3(E,A,B,C,D,WR46,SR46,KR2);
+	RIP3(D,E,A,B,C,WR47,SR47,KR2);
+
+	RIP2(C,D,E,A,B,WR48,SR48,KR3);
+	RIP2(B,C,D,E,A,WR49,SR49,KR3);
+	RIP2(A,B,C,D,E,WR50,SR50,KR3);
+	RIP2(E,A,B,C,D,WR51,SR51,KR3);
+	RIP2(D,E,A,B,C,WR52,SR52,KR3);
+	RIP2(C,D,E,A,B,WR53,SR53,KR3);
+	RIP2(B,C,D,E,A,WR54,SR54,KR3);
+	RIP2(A,B,C,D,E,WR55,SR55,KR3);
+	RIP2(E,A,B,C,D,WR56,SR56,KR3);
+	RIP2(D,E,A,B,C,WR57,SR57,KR3);
+	RIP2(C,D,E,A,B,WR58,SR58,KR3);
+	RIP2(B,C,D,E,A,WR59,SR59,KR3);
+	RIP2(A,B,C,D,E,WR60,SR60,KR3);
+	RIP2(E,A,B,C,D,WR61,SR61,KR3);
+	RIP2(D,E,A,B,C,WR62,SR62,KR3);
+	RIP2(C,D,E,A,B,WR63,SR63,KR3);
+
+	RIP1(B,C,D,E,A,WR64,SR64);
+	RIP1(A,B,C,D,E,WR65,SR65);
+	RIP1(E,A,B,C,D,WR66,SR66);
+	RIP1(D,E,A,B,C,WR67,SR67);
+	RIP1(C,D,E,A,B,WR68,SR68);
+	RIP1(B,C,D,E,A,WR69,SR69);
+	RIP1(A,B,C,D,E,WR70,SR70);
+	RIP1(E,A,B,C,D,WR71,SR71);
+	RIP1(D,E,A,B,C,WR72,SR72);
+	RIP1(C,D,E,A,B,WR73,SR73);
+	RIP1(B,C,D,E,A,WR74,SR74);
+	RIP1(A,B,C,D,E,WR75,SR75);
+	RIP1(E,A,B,C,D,WR76,SR76);
+	RIP1(D,E,A,B,C,WR77,SR77);
+	RIP1(C,D,E,A,B,WR78,SR78);
+	RIP1(B,C,D,E,A,WR79,SR79);
+
+	D     =ctx->B+c+D;
+	ctx->B=ctx->C+d+E;
+	ctx->C=ctx->D+e+A;
+	ctx->D=ctx->E+a+B;
+	ctx->E=ctx->A+b+C;
+	ctx->A=D;
+
+		}
+	}
+#endif
diff --git a/openssl/crypto/ripemd/rmd_locl.h b/openssl/crypto/ripemd/rmd_locl.h
new file mode 100644
index 000000000..ce12a8000
--- /dev/null
+++ b/openssl/crypto/ripemd/rmd_locl.h
@@ -0,0 +1,150 @@
+/* crypto/ripemd/rmd_locl.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <openssl/opensslconf.h>
+#include <openssl/ripemd.h>
+
+#ifndef RIPEMD160_LONG_LOG2
+#define RIPEMD160_LONG_LOG2 2 /* default to 32 bits */
+#endif
+
+/*
+ * DO EXAMINE COMMENTS IN crypto/md5/md5_locl.h & crypto/md5/md5_dgst.c
+ * FOR EXPLANATIONS ON FOLLOWING "CODE."
+ *					<appro@fy.chalmers.se>
+ */
+#ifdef RMD160_ASM
+# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
+#  define ripemd160_block_host_order ripemd160_block_asm_data_order
+# endif
+#endif
+
+void ripemd160_block_data_order (RIPEMD160_CTX *c, const void *p,size_t num);
+
+#define DATA_ORDER_IS_LITTLE_ENDIAN
+
+#define HASH_LONG               RIPEMD160_LONG
+#define HASH_CTX                RIPEMD160_CTX
+#define HASH_CBLOCK             RIPEMD160_CBLOCK
+#define HASH_UPDATE             RIPEMD160_Update
+#define HASH_TRANSFORM          RIPEMD160_Transform
+#define HASH_FINAL              RIPEMD160_Final
+#define	HASH_MAKE_STRING(c,s)	do {	\
+	unsigned long ll;		\
+	ll=(c)->A; HOST_l2c(ll,(s));	\
+	ll=(c)->B; HOST_l2c(ll,(s));	\
+	ll=(c)->C; HOST_l2c(ll,(s));	\
+	ll=(c)->D; HOST_l2c(ll,(s));	\
+	ll=(c)->E; HOST_l2c(ll,(s));	\
+	} while (0)
+#define HASH_BLOCK_DATA_ORDER   ripemd160_block_data_order
+
+#include "md32_common.h"
+
+#if 0
+#define F1(x,y,z)	 ((x)^(y)^(z))
+#define F2(x,y,z)	(((x)&(y))|((~x)&z))
+#define F3(x,y,z)	(((x)|(~y))^(z))
+#define F4(x,y,z)	(((x)&(z))|((y)&(~(z))))
+#define F5(x,y,z)	 ((x)^((y)|(~(z))))
+#else
+/*
+ * Transformed F2 and F4 are courtesy of Wei Dai <weidai@eskimo.com>
+ */
+#define F1(x,y,z)	((x) ^ (y) ^ (z))
+#define F2(x,y,z)	((((y) ^ (z)) & (x)) ^ (z))
+#define F3(x,y,z)	(((~(y)) | (x)) ^ (z))
+#define F4(x,y,z)	((((x) ^ (y)) & (z)) ^ (y))
+#define F5(x,y,z)	(((~(z)) | (y)) ^ (x))
+#endif
+
+#define RIPEMD160_A	0x67452301L
+#define RIPEMD160_B	0xEFCDAB89L
+#define RIPEMD160_C	0x98BADCFEL
+#define RIPEMD160_D	0x10325476L
+#define RIPEMD160_E	0xC3D2E1F0L
+
+#include "rmdconst.h"
+
+#define RIP1(a,b,c,d,e,w,s) { \
+	a+=F1(b,c,d)+X(w); \
+        a=ROTATE(a,s)+e; \
+        c=ROTATE(c,10); }
+
+#define RIP2(a,b,c,d,e,w,s,K) { \
+	a+=F2(b,c,d)+X(w)+K; \
+        a=ROTATE(a,s)+e; \
+        c=ROTATE(c,10); }
+
+#define RIP3(a,b,c,d,e,w,s,K) { \
+	a+=F3(b,c,d)+X(w)+K; \
+        a=ROTATE(a,s)+e; \
+        c=ROTATE(c,10); }
+
+#define RIP4(a,b,c,d,e,w,s,K) { \
+	a+=F4(b,c,d)+X(w)+K; \
+        a=ROTATE(a,s)+e; \
+        c=ROTATE(c,10); }
+
+#define RIP5(a,b,c,d,e,w,s,K) { \
+	a+=F5(b,c,d)+X(w)+K; \
+        a=ROTATE(a,s)+e; \
+        c=ROTATE(c,10); }
+
diff --git a/openssl/crypto/ripemd/rmd_one.c b/openssl/crypto/ripemd/rmd_one.c
new file mode 100644
index 000000000..3efb13758
--- /dev/null
+++ b/openssl/crypto/ripemd/rmd_one.c
@@ -0,0 +1,78 @@
+/* crypto/ripemd/rmd_one.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <openssl/ripemd.h>
+#include <openssl/crypto.h>
+
+unsigned char *RIPEMD160(const unsigned char *d, size_t n,
+	     unsigned char *md)
+	{
+	RIPEMD160_CTX c;
+	static unsigned char m[RIPEMD160_DIGEST_LENGTH];
+
+	if (md == NULL) md=m;
+	if (!RIPEMD160_Init(&c))
+		return NULL;
+	RIPEMD160_Update(&c,d,n);
+	RIPEMD160_Final(md,&c);
+	OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
+	return(md);
+	}
+
diff --git a/openssl/crypto/ripemd/rmdconst.h b/openssl/crypto/ripemd/rmdconst.h
new file mode 100644
index 000000000..59c48dead
--- /dev/null
+++ b/openssl/crypto/ripemd/rmdconst.h
@@ -0,0 +1,399 @@
+/* crypto/ripemd/rmdconst.h */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+#define KL0 0x00000000L
+#define KL1 0x5A827999L
+#define KL2 0x6ED9EBA1L
+#define KL3 0x8F1BBCDCL
+#define KL4 0xA953FD4EL
+
+#define KR0 0x50A28BE6L
+#define KR1 0x5C4DD124L
+#define KR2 0x6D703EF3L
+#define KR3 0x7A6D76E9L
+#define KR4 0x00000000L
+
+#define WL00  0
+#define SL00 11
+#define WL01  1
+#define SL01 14
+#define WL02  2
+#define SL02 15
+#define WL03  3
+#define SL03 12
+#define WL04  4
+#define SL04  5
+#define WL05  5
+#define SL05  8
+#define WL06  6
+#define SL06  7
+#define WL07  7
+#define SL07  9
+#define WL08  8
+#define SL08 11
+#define WL09  9
+#define SL09 13
+#define WL10 10
+#define SL10 14
+#define WL11 11
+#define SL11 15
+#define WL12 12
+#define SL12  6
+#define WL13 13
+#define SL13  7
+#define WL14 14
+#define SL14  9
+#define WL15 15
+#define SL15  8
+
+#define WL16  7
+#define SL16  7
+#define WL17  4
+#define SL17  6
+#define WL18 13
+#define SL18  8
+#define WL19  1
+#define SL19 13
+#define WL20 10
+#define SL20 11
+#define WL21  6
+#define SL21  9
+#define WL22 15
+#define SL22  7
+#define WL23  3
+#define SL23 15
+#define WL24 12
+#define SL24  7
+#define WL25  0
+#define SL25 12
+#define WL26  9
+#define SL26 15
+#define WL27  5
+#define SL27  9
+#define WL28  2
+#define SL28 11
+#define WL29 14
+#define SL29  7
+#define WL30 11
+#define SL30 13
+#define WL31  8
+#define SL31 12
+
+#define WL32  3
+#define SL32 11
+#define WL33 10
+#define SL33 13
+#define WL34 14
+#define SL34  6
+#define WL35  4
+#define SL35  7
+#define WL36  9
+#define SL36 14
+#define WL37 15
+#define SL37  9
+#define WL38  8
+#define SL38 13
+#define WL39  1
+#define SL39 15
+#define WL40  2
+#define SL40 14
+#define WL41  7
+#define SL41  8
+#define WL42  0
+#define SL42 13
+#define WL43  6
+#define SL43  6
+#define WL44 13
+#define SL44  5
+#define WL45 11
+#define SL45 12
+#define WL46  5
+#define SL46  7
+#define WL47 12
+#define SL47  5
+
+#define WL48  1
+#define SL48 11
+#define WL49  9
+#define SL49 12
+#define WL50 11
+#define SL50 14
+#define WL51 10
+#define SL51 15
+#define WL52  0
+#define SL52 14
+#define WL53  8
+#define SL53 15
+#define WL54 12
+#define SL54  9
+#define WL55  4
+#define SL55  8
+#define WL56 13
+#define SL56  9
+#define WL57  3
+#define SL57 14
+#define WL58  7
+#define SL58  5
+#define WL59 15
+#define SL59  6
+#define WL60 14
+#define SL60  8
+#define WL61  5
+#define SL61  6
+#define WL62  6
+#define SL62  5
+#define WL63  2
+#define SL63 12
+
+#define WL64  4
+#define SL64  9
+#define WL65  0
+#define SL65 15
+#define WL66  5
+#define SL66  5
+#define WL67  9
+#define SL67 11
+#define WL68  7
+#define SL68  6
+#define WL69 12
+#define SL69  8
+#define WL70  2
+#define SL70 13
+#define WL71 10
+#define SL71 12
+#define WL72 14
+#define SL72  5
+#define WL73  1
+#define SL73 12
+#define WL74  3
+#define SL74 13
+#define WL75  8
+#define SL75 14
+#define WL76 11
+#define SL76 11
+#define WL77  6
+#define SL77  8
+#define WL78 15
+#define SL78  5
+#define WL79 13
+#define SL79  6
+
+#define WR00  5
+#define SR00  8
+#define WR01 14
+#define SR01  9
+#define WR02  7
+#define SR02  9
+#define WR03  0
+#define SR03 11
+#define WR04  9
+#define SR04 13
+#define WR05  2
+#define SR05 15
+#define WR06 11
+#define SR06 15
+#define WR07  4
+#define SR07  5
+#define WR08 13
+#define SR08  7
+#define WR09  6
+#define SR09  7
+#define WR10 15
+#define SR10  8
+#define WR11  8
+#define SR11 11
+#define WR12  1
+#define SR12 14
+#define WR13 10
+#define SR13 14
+#define WR14  3
+#define SR14 12
+#define WR15 12
+#define SR15  6
+
+#define WR16  6
+#define SR16  9
+#define WR17 11
+#define SR17 13
+#define WR18  3
+#define SR18 15
+#define WR19  7
+#define SR19  7
+#define WR20  0
+#define SR20 12
+#define WR21 13
+#define SR21  8
+#define WR22  5
+#define SR22  9
+#define WR23 10
+#define SR23 11
+#define WR24 14
+#define SR24  7
+#define WR25 15
+#define SR25  7
+#define WR26  8
+#define SR26 12
+#define WR27 12
+#define SR27  7
+#define WR28  4
+#define SR28  6
+#define WR29  9
+#define SR29 15
+#define WR30  1
+#define SR30 13
+#define WR31  2
+#define SR31 11
+
+#define WR32 15
+#define SR32  9
+#define WR33  5
+#define SR33  7
+#define WR34  1
+#define SR34 15
+#define WR35  3
+#define SR35 11
+#define WR36  7
+#define SR36  8
+#define WR37 14
+#define SR37  6
+#define WR38  6
+#define SR38  6
+#define WR39  9
+#define SR39 14
+#define WR40 11
+#define SR40 12
+#define WR41  8
+#define SR41 13
+#define WR42 12
+#define SR42  5
+#define WR43  2
+#define SR43 14
+#define WR44 10
+#define SR44 13
+#define WR45  0
+#define SR45 13
+#define WR46  4
+#define SR46  7
+#define WR47 13
+#define SR47  5
+
+#define WR48  8
+#define SR48 15
+#define WR49  6
+#define SR49  5
+#define WR50  4
+#define SR50  8
+#define WR51  1
+#define SR51 11
+#define WR52  3
+#define SR52 14
+#define WR53 11
+#define SR53 14
+#define WR54 15
+#define SR54  6
+#define WR55  0
+#define SR55 14
+#define WR56  5
+#define SR56  6
+#define WR57 12
+#define SR57  9
+#define WR58  2
+#define SR58 12
+#define WR59 13
+#define SR59  9
+#define WR60  9
+#define SR60 12
+#define WR61  7
+#define SR61  5
+#define WR62 10
+#define SR62 15
+#define WR63 14
+#define SR63  8
+
+#define WR64 12
+#define SR64  8
+#define WR65 15
+#define SR65  5
+#define WR66 10
+#define SR66 12
+#define WR67  4
+#define SR67  9
+#define WR68  1
+#define SR68 12
+#define WR69  5
+#define SR69  5
+#define WR70  8
+#define SR70 14
+#define WR71  7
+#define SR71  6
+#define WR72  6
+#define SR72  8
+#define WR73  2
+#define SR73 13
+#define WR74 13
+#define SR74  6
+#define WR75 14
+#define SR75  5
+#define WR76  0
+#define SR76 15
+#define WR77  3
+#define SR77 13
+#define WR78  9
+#define SR78 11
+#define WR79 11
+#define SR79 11
+
diff --git a/openssl/crypto/ripemd/rmdtest.c b/openssl/crypto/ripemd/rmdtest.c
new file mode 100644
index 000000000..fb34e0e83
--- /dev/null
+++ b/openssl/crypto/ripemd/rmdtest.c
@@ -0,0 +1,145 @@
+/* crypto/ripemd/rmdtest.c */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ * 
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ * 
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from 
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ * 
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * 
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.]
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+#include "../e_os.h"
+
+#ifdef OPENSSL_NO_RIPEMD
+int main(int argc, char *argv[])
+{
+    printf("No ripemd support\n");
+    return(0);
+}
+#else
+#include <openssl/ripemd.h>
+#include <openssl/evp.h>
+
+#ifdef CHARSET_EBCDIC
+#include <openssl/ebcdic.h>
+#endif
+
+static char *test[]={
+	"",
+	"a",
+	"abc",
+	"message digest",
+	"abcdefghijklmnopqrstuvwxyz",
+	"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
+	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
+	"12345678901234567890123456789012345678901234567890123456789012345678901234567890",
+	NULL,
+	};
+
+static char *ret[]={
+	"9c1185a5c5e9fc54612808977ee8f548b2258d31",
+	"0bdc9d2d256b3ee9daae347be6f4dc835a467ffe",
+	"8eb208f7e05d987a9b044a8e98c6b087f15a0bfc",
+	"5d0689ef49d2fae572b881b123a85ffa21595f36",
+	"f71c27109c692c1b56bbdceb5b9d2865b3708dbc",
+	"12a053384a9c0c88e405a06c27dcf49ada62eb2b",
+	"b0e20b6e3116640286ed3a87a5713079b21f5189",
+	"9b752e45573d4b39f4dbd3323cab82bf63326bfb",
+	};
+
+static char *pt(unsigned char *md);
+int main(int argc, char *argv[])
+	{
+	int i,err=0;
+	char **P,**R;
+	char *p;
+	unsigned char md[RIPEMD160_DIGEST_LENGTH];
+
+	P=test;
+	R=ret;
+	i=1;
+	while (*P != NULL)
+		{
+#ifdef CHARSET_EBCDIC
+		ebcdic2ascii((char *)*P, (char *)*P, strlen((char *)*P));
+#endif
+		EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_ripemd160(), NULL);
+		p=pt(md);
+		if (strcmp(p,(char *)*R) != 0)
+			{
+			printf("error calculating RIPEMD160 on '%s'\n",*P);
+			printf("got %s instead of %s\n",p,*R);
+			err++;
+			}
+		else
+			printf("test %d ok\n",i);
+		i++;
+		R++;
+		P++;
+		}
+	EXIT(err);
+	return(0);
+	}
+
+static char *pt(unsigned char *md)
+	{
+	int i;
+	static char buf[80];
+
+	for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
+		sprintf(&(buf[i*2]),"%02x",md[i]);
+	return(buf);
+	}
+#endif