Upgraded to openssl-1.0.2

1 files changed, 288 insertions, 32 deletions

diff --git a/openssl/crypto/sha/asm/sha512-sparcv9.pl b/openssl/crypto/sha/asm/sha512-sparcv9.pl
index 585740789..5a9c15d1d 100644
--- a/openssl/crypto/sha/asm/sha512-sparcv9.pl
+++ b/openssl/crypto/sha/asm/sha512-sparcv9.pl
@@ -5,6 +5,8 @@
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
 # details see http://www.openssl.org/~appro/cryptogams/.
+#
+# Hardware SPARC T4 support by David S. Miller <davem@davemloft.net>.
 # ====================================================================
 
 # SHA256 performance improvement over compiler generated code varies
@@ -41,11 +43,11 @@
 #	loads are always slower than one 64-bit load. Once again this
 #	is unlike pre-T1 UltraSPARC, where, if scheduled appropriately,
 #	2x32-bit loads can be as fast as 1x64-bit ones.
-
-$bits=32;
-for (@ARGV)	{ $bits=64 if (/\-m64/ || /\-xarch\=v9/); }
-if ($bits==64)	{ $bias=2047; $frame=192; }
-else		{ $bias=0;    $frame=112; }
+#
+# SPARC T4 SHA256/512 hardware achieves 3.17/2.01 cycles per byte,
+# which is 9.3x/11.1x faster than software. Multi-process benchmark
+# saturates at 11.5x single-process result on 8-core processor, or
+# ~11/16GBps per 2.85GHz socket.
 
 $output=shift;
 open STDOUT,">$output";
@@ -170,6 +172,7 @@ $code.=<<___ if ($i==0);
 	ld	[$inp+16],%l4
 	ld	[$inp+20],%l5
 	ld	[$inp+24],%l6
+	cmp	$tmp31,0
 	ld	[$inp+28],%l7
 ___
 $code.=<<___ if ($i<15);
@@ -182,29 +185,29 @@ $code.=<<___ if ($i<15);
 	or	@pair[1],$tmp2,$tmp2
 	`"ld	[$inp+".eval(32+4+$i*8)."],@pair[1]"	if ($i<12)`
 	add	$h,$tmp2,$T1
-	$ST	$tmp2,[%sp+`$bias+$frame+$i*$SZ`]
+	$ST	$tmp2,[%sp+STACK_BIAS+STACK_FRAME+`$i*$SZ`]
 ___
 $code.=<<___ if ($i==12);
-	brnz,a	$tmp31,.+8
+	bnz,a,pn	%icc,.+8
 	ld	[$inp+128],%l0
 ___
 $code.=<<___ if ($i==15);
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+1)%16)*$SZ+0`],%l2
 	sllx	@pair[1],$tmp31,$tmp2	! Xload($i)
 	add	$tmp31,32,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+1)%16)*$SZ+4`],%l3
 	sllx	@pair[0],$tmp0,$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+9)%16)*$SZ+0`],%l4
 	srlx	@pair[2],$tmp32,@pair[1]
 	or	$tmp1,$tmp2,$tmp2
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+9)%16)*$SZ+4`],%l5
 	or	@pair[1],$tmp2,$tmp2
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+14)%16)*$SZ+0`],%l6
 	add	$h,$tmp2,$T1
-	$ST	$tmp2,[%sp+`$bias+$frame+$i*$SZ`]
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1
+	$ST	$tmp2,[%sp+STACK_BIAS+STACK_FRAME+`$i*$SZ`]
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+14)%16)*$SZ+4`],%l7
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+0)%16)*$SZ+0`],%l0
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+0)%16)*$SZ+4`],%l1
 ___
 } if ($SZ==8);
 
@@ -340,9 +343,9 @@ $code.=<<___;
 	or	%l3,$tmp0,$tmp0
 
 	srlx	$tmp0,@sigma0[0],$T1
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+0`],%l2
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+1)%16)*$SZ+0`],%l2
 	sllx	$tmp0,`64-@sigma0[2]`,$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+1)%16)*$SZ+4`],%l3
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+1)%16)*$SZ+4`],%l3
 	srlx	$tmp0,@sigma0[1],$tmp0
 	xor	$tmp1,$T1,$T1
 	sllx	$tmp1,`@sigma0[2]-@sigma0[1]`,$tmp1
@@ -354,9 +357,9 @@ $code.=<<___;
 	or	%l7,$tmp2,$tmp2
 
 	srlx	$tmp2,@sigma1[0],$tmp1
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+0`],%l6
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+14)%16)*$SZ+0`],%l6
 	sllx	$tmp2,`64-@sigma1[2]`,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+14)%16)*$SZ+4`],%l7
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+14)%16)*$SZ+4`],%l7
 	srlx	$tmp2,@sigma1[1],$tmp2
 	xor	$tmp0,$tmp1,$tmp1
 	sllx	$tmp0,`@sigma1[2]-@sigma1[1]`,$tmp0
@@ -365,27 +368,30 @@ $code.=<<___;
 	xor	$tmp0,$tmp1,$tmp1
 	sllx	%l4,32,$tmp0
 	xor	$tmp2,$tmp1,$tmp1	! sigma1(X[$i+14])
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+0`],%l4
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+9)%16)*$SZ+0`],%l4
 	or	%l5,$tmp0,$tmp0
-	ld	[%sp+`$bias+$frame+(($i+1+9)%16)*$SZ+4`],%l5
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+9)%16)*$SZ+4`],%l5
 
 	sllx	%l0,32,$tmp2
 	add	$tmp1,$T1,$T1
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+0`],%l0
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+0)%16)*$SZ+0`],%l0
 	or	%l1,$tmp2,$tmp2
 	add	$tmp0,$T1,$T1		! +=X[$i+9]
-	ld	[%sp+`$bias+$frame+(($i+1+0)%16)*$SZ+4`],%l1
+	ld	[%sp+STACK_BIAS+STACK_FRAME+`(($i+1+0)%16)*$SZ+4`],%l1
 	add	$tmp2,$T1,$T1		! +=X[$i]
-	$ST	$T1,[%sp+`$bias+$frame+($i%16)*$SZ`]
+	$ST	$T1,[%sp+STACK_BIAS+STACK_FRAME+`($i%16)*$SZ`]
 ___
     &BODY_00_15(@_);
 } if ($SZ==8);
 
-$code.=<<___ if ($bits==64);
+$code.=<<___;
+#include "sparc_arch.h"
+
+#ifdef __arch64__
 .register	%g2,#scratch
 .register	%g3,#scratch
-___
-$code.=<<___;
+#endif
+
 .section	".text",#alloc,#execinstr
 
 .align	64
@@ -457,9 +463,203 @@ ___
 }
 $code.=<<___;
 .size	K${label},.-K${label}
+
+#ifdef __PIC__
+SPARC_PIC_THUNK(%g1)
+#endif
+
 .globl	sha${label}_block_data_order
+.align	32
 sha${label}_block_data_order:
-	save	%sp,`-$frame-$locals`,%sp
+	SPARC_LOAD_ADDRESS_LEAF(OPENSSL_sparcv9cap_P,%g1,%g5)
+	ld	[%g1+4],%g1		! OPENSSL_sparcv9cap_P[1]
+
+	andcc	%g1, CFR_SHA${label}, %g0
+	be	.Lsoftware
+	nop
+___
+$code.=<<___ if ($SZ==8); 		# SHA512
+	ldd	[%o0 + 0x00], %f0	! load context
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	andcc	%o1, 0x7, %g0
+	ldd	[%o0 + 0x30], %f12
+	bne,pn	%icc, .Lhwunaligned
+	 ldd	[%o0 + 0x38], %f14
+
+.Lhwaligned_loop:
+	ldd	[%o1 + 0x00], %f16
+	ldd	[%o1 + 0x08], %f18
+	ldd	[%o1 + 0x10], %f20
+	ldd	[%o1 + 0x18], %f22
+	ldd	[%o1 + 0x20], %f24
+	ldd	[%o1 + 0x28], %f26
+	ldd	[%o1 + 0x30], %f28
+	ldd	[%o1 + 0x38], %f30
+	ldd	[%o1 + 0x40], %f32
+	ldd	[%o1 + 0x48], %f34
+	ldd	[%o1 + 0x50], %f36
+	ldd	[%o1 + 0x58], %f38
+	ldd	[%o1 + 0x60], %f40
+	ldd	[%o1 + 0x68], %f42
+	ldd	[%o1 + 0x70], %f44
+	subcc	%o2, 1, %o2		! done yet?
+	ldd	[%o1 + 0x78], %f46
+	add	%o1, 0x80, %o1
+	prefetch [%o1 + 63], 20
+	prefetch [%o1 + 64+63], 20
+
+	.word	0x81b02860		! SHA512
+
+	bne,pt	SIZE_T_CC, .Lhwaligned_loop
+	nop
+
+.Lhwfinish:
+	std	%f0, [%o0 + 0x00]	! store context
+	std	%f2, [%o0 + 0x08]
+	std	%f4, [%o0 + 0x10]
+	std	%f6, [%o0 + 0x18]
+	std	%f8, [%o0 + 0x20]
+	std	%f10, [%o0 + 0x28]
+	std	%f12, [%o0 + 0x30]
+	retl
+	 std	%f14, [%o0 + 0x38]
+
+.align	16
+.Lhwunaligned:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f18
+.Lhwunaligned_loop:
+	ldd	[%o1 + 0x08], %f20
+	ldd	[%o1 + 0x10], %f22
+	ldd	[%o1 + 0x18], %f24
+	ldd	[%o1 + 0x20], %f26
+	ldd	[%o1 + 0x28], %f28
+	ldd	[%o1 + 0x30], %f30
+	ldd	[%o1 + 0x38], %f32
+	ldd	[%o1 + 0x40], %f34
+	ldd	[%o1 + 0x48], %f36
+	ldd	[%o1 + 0x50], %f38
+	ldd	[%o1 + 0x58], %f40
+	ldd	[%o1 + 0x60], %f42
+	ldd	[%o1 + 0x68], %f44
+	ldd	[%o1 + 0x70], %f46
+	ldd	[%o1 + 0x78], %f48
+	subcc	%o2, 1, %o2		! done yet?
+	ldd	[%o1 + 0x80], %f50
+	add	%o1, 0x80, %o1
+	prefetch [%o1 + 63], 20
+	prefetch [%o1 + 64+63], 20
+
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+	faligndata %f26, %f28, %f24
+	faligndata %f28, %f30, %f26
+	faligndata %f30, %f32, %f28
+	faligndata %f32, %f34, %f30
+	faligndata %f34, %f36, %f32
+	faligndata %f36, %f38, %f34
+	faligndata %f38, %f40, %f36
+	faligndata %f40, %f42, %f38
+	faligndata %f42, %f44, %f40
+	faligndata %f44, %f46, %f42
+	faligndata %f46, %f48, %f44
+	faligndata %f48, %f50, %f46
+
+	.word	0x81b02860		! SHA512
+
+	bne,pt	SIZE_T_CC, .Lhwunaligned_loop
+	for	%f50, %f50, %f18	! %f18=%f50
+
+	ba	.Lhwfinish
+	nop
+___
+$code.=<<___ if ($SZ==4); 		# SHA256
+	ld	[%o0 + 0x00], %f0
+	ld	[%o0 + 0x04], %f1
+	ld	[%o0 + 0x08], %f2
+	ld	[%o0 + 0x0c], %f3
+	ld	[%o0 + 0x10], %f4
+	ld	[%o0 + 0x14], %f5
+	andcc	%o1, 0x7, %g0
+	ld	[%o0 + 0x18], %f6
+	bne,pn	%icc, .Lhwunaligned
+	 ld	[%o0 + 0x1c], %f7
+
+.Lhwloop:
+	ldd	[%o1 + 0x00], %f8
+	ldd	[%o1 + 0x08], %f10
+	ldd	[%o1 + 0x10], %f12
+	ldd	[%o1 + 0x18], %f14
+	ldd	[%o1 + 0x20], %f16
+	ldd	[%o1 + 0x28], %f18
+	ldd	[%o1 + 0x30], %f20
+	subcc	%o2, 1, %o2		! done yet?
+	ldd	[%o1 + 0x38], %f22
+	add	%o1, 0x40, %o1
+	prefetch [%o1 + 63], 20
+
+	.word	0x81b02840		! SHA256
+
+	bne,pt	SIZE_T_CC, .Lhwloop
+	nop
+
+.Lhwfinish:
+	st	%f0, [%o0 + 0x00]	! store context
+	st	%f1, [%o0 + 0x04]
+	st	%f2, [%o0 + 0x08]
+	st	%f3, [%o0 + 0x0c]
+	st	%f4, [%o0 + 0x10]
+	st	%f5, [%o0 + 0x14]
+	st	%f6, [%o0 + 0x18]
+	retl
+	 st	%f7, [%o0 + 0x1c]
+
+.align	8
+.Lhwunaligned:
+	alignaddr %o1, %g0, %o1
+
+	ldd	[%o1 + 0x00], %f10
+.Lhwunaligned_loop:
+	ldd	[%o1 + 0x08], %f12
+	ldd	[%o1 + 0x10], %f14
+	ldd	[%o1 + 0x18], %f16
+	ldd	[%o1 + 0x20], %f18
+	ldd	[%o1 + 0x28], %f20
+	ldd	[%o1 + 0x30], %f22
+	ldd	[%o1 + 0x38], %f24
+	subcc	%o2, 1, %o2		! done yet?
+	ldd	[%o1 + 0x40], %f26
+	add	%o1, 0x40, %o1
+	prefetch [%o1 + 63], 20
+
+	faligndata %f10, %f12, %f8
+	faligndata %f12, %f14, %f10
+	faligndata %f14, %f16, %f12
+	faligndata %f16, %f18, %f14
+	faligndata %f18, %f20, %f16
+	faligndata %f20, %f22, %f18
+	faligndata %f22, %f24, %f20
+	faligndata %f24, %f26, %f22
+
+	.word	0x81b02840		! SHA256
+
+	bne,pt	SIZE_T_CC, .Lhwunaligned_loop
+	for	%f26, %f26, %f10	! %f10=%f26
+
+	ba	.Lhwfinish
+	nop
+___
+$code.=<<___;
+.align	16
+.Lsoftware:
+	save	%sp,-STACK_FRAME-$locals,%sp
 	and	$inp,`$align-1`,$tmp31
 	sllx	$len,`log(16*$SZ)/log(2)`,$len
 	andn	$inp,`$align-1`,$inp
@@ -578,7 +778,7 @@ ___
 $code.=<<___;
 	add	$inp,`16*$SZ`,$inp		! advance inp
 	cmp	$inp,$len
-	bne	`$bits==64?"%xcc":"%icc"`,.Lloop
+	bne	SIZE_T_CC,.Lloop
 	sub	$Ktbl,`($rounds-16)*$SZ`,$Ktbl	! rewind Ktbl
 
 	ret
@@ -589,6 +789,62 @@ $code.=<<___;
 .align	4
 ___
 
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-print $code;
+# Purpose of these subroutines is to explicitly encode VIS instructions,
+# so that one can compile the module without having to specify VIS
+# extentions on compiler command line, e.g. -xarch=v9 vs. -xarch=v9a.
+# Idea is to reserve for option to produce "universal" binary and let
+# programmer detect if current CPU is VIS capable at run-time.
+sub unvis {
+my ($mnemonic,$rs1,$rs2,$rd)=@_;
+my $ref,$opf;
+my %visopf = (	"faligndata"	=> 0x048,
+		"for"		=> 0x07c	);
+
+    $ref = "$mnemonic\t$rs1,$rs2,$rd";
+
+    if ($opf=$visopf{$mnemonic}) {
+	foreach ($rs1,$rs2,$rd) {
+	    return $ref if (!/%f([0-9]{1,2})/);
+	    $_=$1;
+	    if ($1>=32) {
+		return $ref if ($1&1);
+		# re-encode for upper double register addressing
+		$_=($1|$1>>5)&31;
+	    }
+	}
+
+	return	sprintf ".word\t0x%08x !%s",
+			0x81b00000|$rd<<25|$rs1<<14|$opf<<5|$rs2,
+			$ref;
+    } else {
+	return $ref;
+    }
+}
+sub unalignaddr {
+my ($mnemonic,$rs1,$rs2,$rd)=@_;
+my %bias = ( "g" => 0, "o" => 8, "l" => 16, "i" => 24 );
+my $ref="$mnemonic\t$rs1,$rs2,$rd";
+
+    foreach ($rs1,$rs2,$rd) {
+	if (/%([goli])([0-7])/)	{ $_=$bias{$1}+$2; }
+	else			{ return $ref; }
+    }
+    return  sprintf ".word\t0x%08x !%s",
+		    0x81b00300|$rd<<25|$rs1<<14|$rs2,
+		    $ref;
+}
+
+foreach (split("\n",$code)) {
+	s/\`([^\`]*)\`/eval $1/ge;
+
+	s/\b(f[^\s]*)\s+(%f[0-9]{1,2}),\s*(%f[0-9]{1,2}),\s*(%f[0-9]{1,2})/
+		&unvis($1,$2,$3,$4)
+	 /ge;
+	s/\b(alignaddr)\s+(%[goli][0-7]),\s*(%[goli][0-7]),\s*(%[goli][0-7])/
+		&unalignaddr($1,$2,$3,$4)
+	 /ge;
+
+	print $_,"\n";
+}
+
 close STDOUT;