aboutsummaryrefslogtreecommitdiff
path: root/openssl/doc/apps/config.pod
diff options
context:
space:
mode:
authormarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
committermarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
commit3562e78743202e43aec8727005182a2558117eca (patch)
tree8f9113a77d12470c5c851a2a8e4cb02e89df7d43 /openssl/doc/apps/config.pod
downloadvcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.gz
vcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.bz2
vcxsrv-3562e78743202e43aec8727005182a2558117eca.zip
Checked in the following released items:
xkeyboard-config-1.4.tar.gz ttf-bitstream-vera-1.10.tar.gz font-alias-1.0.1.tar.gz font-sun-misc-1.0.0.tar.gz font-sun-misc-1.0.0.tar.gz font-sony-misc-1.0.0.tar.gz font-schumacher-misc-1.0.0.tar.gz font-mutt-misc-1.0.0.tar.gz font-misc-misc-1.0.0.tar.gz font-misc-meltho-1.0.0.tar.gz font-micro-misc-1.0.0.tar.gz font-jis-misc-1.0.0.tar.gz font-isas-misc-1.0.0.tar.gz font-dec-misc-1.0.0.tar.gz font-daewoo-misc-1.0.0.tar.gz font-cursor-misc-1.0.0.tar.gz font-arabic-misc-1.0.0.tar.gz font-winitzki-cyrillic-1.0.0.tar.gz font-misc-cyrillic-1.0.0.tar.gz font-cronyx-cyrillic-1.0.0.tar.gz font-screen-cyrillic-1.0.1.tar.gz font-xfree86-type1-1.0.1.tar.gz font-adobe-utopia-type1-1.0.1.tar.gz font-ibm-type1-1.0.0.tar.gz font-bitstream-type1-1.0.0.tar.gz font-bitstream-speedo-1.0.0.tar.gz font-bh-ttf-1.0.0.tar.gz font-bh-type1-1.0.0.tar.gz font-bitstream-100dpi-1.0.0.tar.gz font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz font-bh-100dpi-1.0.0.tar.gz font-adobe-utopia-100dpi-1.0.1.tar.gz font-adobe-100dpi-1.0.0.tar.gz font-util-1.0.1.tar.gz font-bitstream-75dpi-1.0.0.tar.gz font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz font-adobe-utopia-75dpi-1.0.1.tar.gz font-bh-75dpi-1.0.0.tar.gz bdftopcf-1.0.1.tar.gz font-adobe-75dpi-1.0.0.tar.gz mkfontscale-1.0.6.tar.gz openssl-0.9.8k.tar.gz bigreqsproto-1.0.2.tar.gz xtrans-1.2.2.tar.gz resourceproto-1.0.2.tar.gz inputproto-1.4.4.tar.gz compositeproto-0.4.tar.gz damageproto-1.1.0.tar.gz zlib-1.2.3.tar.gz xkbcomp-1.0.5.tar.gz freetype-2.3.9.tar.gz pthreads-w32-2-8-0-release.tar.gz pixman-0.12.0.tar.gz kbproto-1.0.3.tar.gz evieext-1.0.2.tar.gz fixesproto-4.0.tar.gz recordproto-1.13.2.tar.gz randrproto-1.2.2.tar.gz scrnsaverproto-1.1.0.tar.gz renderproto-0.9.3.tar.gz xcmiscproto-1.1.2.tar.gz fontsproto-2.0.2.tar.gz xextproto-7.0.3.tar.gz xproto-7.0.14.tar.gz libXdmcp-1.0.2.tar.gz libxkbfile-1.0.5.tar.gz libfontenc-1.0.4.tar.gz libXfont-1.3.4.tar.gz libX11-1.1.5.tar.gz libXau-1.0.4.tar.gz libxcb-1.1.tar.gz xorg-server-1.5.3.tar.gz
Diffstat (limited to 'openssl/doc/apps/config.pod')
-rw-r--r--openssl/doc/apps/config.pod279
1 files changed, 279 insertions, 0 deletions
diff --git a/openssl/doc/apps/config.pod b/openssl/doc/apps/config.pod
new file mode 100644
index 000000000..ace34b62b
--- /dev/null
+++ b/openssl/doc/apps/config.pod
@@ -0,0 +1,279 @@
+
+=pod
+
+=for comment openssl_manual_section:5
+
+=head1 NAME
+
+config - OpenSSL CONF library configuration files
+
+=head1 DESCRIPTION
+
+The OpenSSL CONF library can be used to read configuration files.
+It is used for the OpenSSL master configuration file B<openssl.cnf>
+and in a few other places like B<SPKAC> files and certificate extension
+files for the B<x509> utility. OpenSSL applications can also use the
+CONF library for their own purposes.
+
+A configuration file is divided into a number of sections. Each section
+starts with a line B<[ section_name ]> and ends when a new section is
+started or end of file is reached. A section name can consist of
+alphanumeric characters and underscores.
+
+The first section of a configuration file is special and is referred
+to as the B<default> section this is usually unnamed and is from the
+start of file until the first named section. When a name is being looked up
+it is first looked up in a named section (if any) and then the
+default section.
+
+The environment is mapped onto a section called B<ENV>.
+
+Comments can be included by preceding them with the B<#> character
+
+Each section in a configuration file consists of a number of name and
+value pairs of the form B<name=value>
+
+The B<name> string can contain any alphanumeric characters as well as
+a few punctuation symbols such as B<.> B<,> B<;> and B<_>.
+
+The B<value> string consists of the string following the B<=> character
+until end of line with any leading and trailing white space removed.
+
+The value string undergoes variable expansion. This can be done by
+including the form B<$var> or B<${var}>: this will substitute the value
+of the named variable in the current section. It is also possible to
+substitute a value from another section using the syntax B<$section::name>
+or B<${section::name}>. By using the form B<$ENV::name> environment
+variables can be substituted. It is also possible to assign values to
+environment variables by using the name B<ENV::name>, this will work
+if the program looks up environment variables using the B<CONF> library
+instead of calling B<getenv()> directly.
+
+It is possible to escape certain characters by using any kind of quote
+or the B<\> character. By making the last character of a line a B<\>
+a B<value> string can be spread across multiple lines. In addition
+the sequences B<\n>, B<\r>, B<\b> and B<\t> are recognized.
+
+=head1 OPENSSL LIBRARY CONFIGURATION
+
+In OpenSSL 0.9.7 and later applications can automatically configure certain
+aspects of OpenSSL using the master OpenSSL configuration file, or optionally
+an alternative configuration file. The B<openssl> utility includes this
+functionality: any sub command uses the master OpenSSL configuration file
+unless an option is used in the sub command to use an alternative configuration
+file.
+
+To enable library configuration the default section needs to contain an
+appropriate line which points to the main configuration section. The default
+name is B<openssl_conf> which is used by the B<openssl> utility. Other
+applications may use an alternative name such as B<myapplicaton_conf>.
+
+The configuration section should consist of a set of name value pairs which
+contain specific module configuration information. The B<name> represents
+the name of the I<configuration module> the meaning of the B<value> is
+module specific: it may, for example, represent a further configuration
+section containing configuration module specific information. E.g.
+
+ openssl_conf = openssl_init
+
+ [openssl_init]
+
+ oid_section = new_oids
+ engines = engine_section
+
+ [new_oids]
+
+ ... new oids here ...
+
+ [engine_section]
+
+ ... engine stuff here ...
+
+Currently there are two configuration modules. One for ASN1 objects another
+for ENGINE configuration.
+
+=head2 ASN1 OBJECT CONFIGURATION MODULE
+
+This module has the name B<oid_section>. The value of this variable points
+to a section containing name value pairs of OIDs: the name is the OID short
+and long name, the value is the numerical form of the OID. Although some of
+the B<openssl> utility sub commands already have their own ASN1 OBJECT section
+functionality not all do. By using the ASN1 OBJECT configuration module
+B<all> the B<openssl> utility sub commands can see the new objects as well
+as any compliant applications. For example:
+
+ [new_oids]
+
+ some_new_oid = 1.2.3.4
+ some_other_oid = 1.2.3.5
+
+In OpenSSL 0.9.8 it is also possible to set the value to the long name followed
+by a comma and the numerical OID form. For example:
+
+ shortName = some object long name, 1.2.3.4
+
+=head2 ENGINE CONFIGURATION MODULE
+
+This ENGINE configuration module has the name B<engines>. The value of this
+variable points to a section containing further ENGINE configuration
+information.
+
+The section pointed to by B<engines> is a table of engine names (though see
+B<engine_id> below) and further sections containing configuration informations
+specific to each ENGINE.
+
+Each ENGINE specific section is used to set default algorithms, load
+dynamic, perform initialization and send ctrls. The actual operation performed
+depends on the I<command> name which is the name of the name value pair. The
+currently supported commands are listed below.
+
+For example:
+
+ [engine_section]
+
+ # Configure ENGINE named "foo"
+ foo = foo_section
+ # Configure ENGINE named "bar"
+ bar = bar_section
+
+ [foo_section]
+ ... foo ENGINE specific commands ...
+
+ [bar_section]
+ ... "bar" ENGINE specific commands ...
+
+The command B<engine_id> is used to give the ENGINE name. If used this
+command must be first. For example:
+
+ [engine_section]
+ # This would normally handle an ENGINE named "foo"
+ foo = foo_section
+
+ [foo_section]
+ # Override default name and use "myfoo" instead.
+ engine_id = myfoo
+
+The command B<dynamic_path> loads and adds an ENGINE from the given path. It
+is equivalent to sending the ctrls B<SO_PATH> with the path argument followed
+by B<LIST_ADD> with value 2 and B<LOAD> to the dynamic ENGINE. If this is
+not the required behaviour then alternative ctrls can be sent directly
+to the dynamic ENGINE using ctrl commands.
+
+The command B<init> determines whether to initialize the ENGINE. If the value
+is B<0> the ENGINE will not be initialized, if B<1> and attempt it made to
+initialized the ENGINE immediately. If the B<init> command is not present
+then an attempt will be made to initialize the ENGINE after all commands in
+its section have been processed.
+
+The command B<default_algorithms> sets the default algorithms an ENGINE will
+supply using the functions B<ENGINE_set_default_string()>
+
+If the name matches none of the above command names it is assumed to be a
+ctrl command which is sent to the ENGINE. The value of the command is the
+argument to the ctrl command. If the value is the string B<EMPTY> then no
+value is sent to the command.
+
+For example:
+
+
+ [engine_section]
+
+ # Configure ENGINE named "foo"
+ foo = foo_section
+
+ [foo_section]
+ # Load engine from DSO
+ dynamic_path = /some/path/fooengine.so
+ # A foo specific ctrl.
+ some_ctrl = some_value
+ # Another ctrl that doesn't take a value.
+ other_ctrl = EMPTY
+ # Supply all default algorithms
+ default_algorithms = ALL
+
+=head1 NOTES
+
+If a configuration file attempts to expand a variable that doesn't exist
+then an error is flagged and the file will not load. This can happen
+if an attempt is made to expand an environment variable that doesn't
+exist. For example in a previous version of OpenSSL the default OpenSSL
+master configuration file used the value of B<HOME> which may not be
+defined on non Unix systems and would cause an error.
+
+This can be worked around by including a B<default> section to provide
+a default value: then if the environment lookup fails the default value
+will be used instead. For this to work properly the default value must
+be defined earlier in the configuration file than the expansion. See
+the B<EXAMPLES> section for an example of how to do this.
+
+If the same variable exists in the same section then all but the last
+value will be silently ignored. In certain circumstances such as with
+DNs the same field may occur multiple times. This is usually worked
+around by ignoring any characters before an initial B<.> e.g.
+
+ 1.OU="My first OU"
+ 2.OU="My Second OU"
+
+=head1 EXAMPLES
+
+Here is a sample configuration file using some of the features
+mentioned above.
+
+ # This is the default section.
+
+ HOME=/temp
+ RANDFILE= ${ENV::HOME}/.rnd
+ configdir=$ENV::HOME/config
+
+ [ section_one ]
+
+ # We are now in section one.
+
+ # Quotes permit leading and trailing whitespace
+ any = " any variable name "
+
+ other = A string that can \
+ cover several lines \
+ by including \\ characters
+
+ message = Hello World\n
+
+ [ section_two ]
+
+ greeting = $section_one::message
+
+This next example shows how to expand environment variables safely.
+
+Suppose you want a variable called B<tmpfile> to refer to a
+temporary filename. The directory it is placed in can determined by
+the the B<TEMP> or B<TMP> environment variables but they may not be
+set to any value at all. If you just include the environment variable
+names and the variable doesn't exist then this will cause an error when
+an attempt is made to load the configuration file. By making use of the
+default section both values can be looked up with B<TEMP> taking
+priority and B</tmp> used if neither is defined:
+
+ TMP=/tmp
+ # The above value is used if TMP isn't in the environment
+ TEMP=$ENV::TMP
+ # The above value is used if TEMP isn't in the environment
+ tmpfile=${ENV::TEMP}/tmp.filename
+
+=head1 BUGS
+
+Currently there is no way to include characters using the octal B<\nnn>
+form. Strings are all null terminated so nulls cannot form part of
+the value.
+
+The escaping isn't quite right: if you want to use sequences like B<\n>
+you can't use any quote escaping on the same line.
+
+Files are loaded in a single pass. This means that an variable expansion
+will only work if the variables referenced are defined earlier in the
+file.
+
+=head1 SEE ALSO
+
+L<x509(1)|x509(1)>, L<req(1)|req(1)>, L<ca(1)|ca(1)>
+
+=cut