Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 365 insertions, 0 deletions

diff --git a/openssl/doc/apps/ocsp.pod b/openssl/doc/apps/ocsp.pod
new file mode 100644
index 000000000..b58ddc178
--- /dev/null
+++ b/openssl/doc/apps/ocsp.pod
@@ -0,0 +1,365 @@
+=pod
+
+=head1 NAME
+
+ocsp - Online Certificate Status Protocol utility
+
+=head1 SYNOPSIS
+
+B<openssl> B<ocsp>
+[B<-out file>]
+[B<-issuer file>]
+[B<-cert file>]
+[B<-serial n>]
+[B<-signer file>]
+[B<-signkey file>]
+[B<-sign_other file>]
+[B<-no_certs>]
+[B<-req_text>]
+[B<-resp_text>]
+[B<-text>]
+[B<-reqout file>]
+[B<-respout file>]
+[B<-reqin file>]
+[B<-respin file>]
+[B<-nonce>]
+[B<-no_nonce>]
+[B<-url URL>]
+[B<-host host:n>]
+[B<-path>]
+[B<-CApath dir>]
+[B<-CAfile file>]
+[B<-VAfile file>]
+[B<-validity_period n>]
+[B<-status_age n>]
+[B<-noverify>]
+[B<-verify_other file>]
+[B<-trust_other>]
+[B<-no_intern>]
+[B<-no_signature_verify>]
+[B<-no_cert_verify>]
+[B<-no_chain>]
+[B<-no_cert_checks>]
+[B<-port num>]
+[B<-index file>]
+[B<-CA file>]
+[B<-rsigner file>]
+[B<-rkey file>]
+[B<-rother file>]
+[B<-resp_no_certs>]
+[B<-nmin n>]
+[B<-ndays n>]
+[B<-resp_key_id>]
+[B<-nrequest n>]
+
+=head1 DESCRIPTION
+
+The Online Certificate Status Protocol (OCSP) enables applications to
+determine the (revocation) state of an identified certificate (RFC 2560).
+
+The B<ocsp> command performs many common OCSP tasks. It can be used
+to print out requests and responses, create requests and send queries
+to an OCSP responder and behave like a mini OCSP server itself.
+
+=head1 OCSP CLIENT OPTIONS
+
+=over 4
+
+=item B<-out filename>
+
+specify output filename, default is standard output.
+
+=item B<-issuer filename>
+
+This specifies the current issuer certificate. This option can be used
+multiple times. The certificate specified in B<filename> must be in
+PEM format. This option B<MUST> come before any B<-cert> options.
+
+=item B<-cert filename>
+
+Add the certificate B<filename> to the request. The issuer certificate
+is taken from the previous B<issuer> option, or an error occurs if no
+issuer certificate is specified.
+
+=item B<-serial num>
+
+Same as the B<cert> option except the certificate with serial number
+B<num> is added to the request. The serial number is interpreted as a
+decimal integer unless preceded by B<0x>. Negative integers can also
+be specified by preceding the value by a B<-> sign.
+
+=item B<-signer filename>, B<-signkey filename>
+
+Sign the OCSP request using the certificate specified in the B<signer>
+option and the private key specified by the B<signkey> option. If
+the B<signkey> option is not present then the private key is read
+from the same file as the certificate. If neither option is specified then
+the OCSP request is not signed.
+
+=item B<-sign_other filename>
+
+Additional certificates to include in the signed request.
+
+=item B<-nonce>, B<-no_nonce>
+
+Add an OCSP nonce extension to a request or disable OCSP nonce addition.
+Normally if an OCSP request is input using the B<respin> option no
+nonce is added: using the B<nonce> option will force addition of a nonce.
+If an OCSP request is being created (using B<cert> and B<serial> options)
+a nonce is automatically added specifying B<no_nonce> overrides this.
+
+=item B<-req_text>, B<-resp_text>, B<-text>
+
+print out the text form of the OCSP request, response or both respectively.
+
+=item B<-reqout file>, B<-respout file>
+
+write out the DER encoded certificate request or response to B<file>.
+
+=item B<-reqin file>, B<-respin file>
+
+read OCSP request or response file from B<file>. These option are ignored
+if OCSP request or response creation is implied by other options (for example
+with B<serial>, B<cert> and B<host> options).
+
+=item B<-url responder_url>
+
+specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can be specified.
+
+=item B<-host hostname:port>, B<-path pathname>
+
+if the B<host> option is present then the OCSP request is sent to the host
+B<hostname> on port B<port>. B<path> specifies the HTTP path name to use
+or "/" by default.
+
+=item B<-CAfile file>, B<-CApath pathname>
+
+file or pathname containing trusted CA certificates. These are used to verify
+the signature on the OCSP response.
+
+=item B<-verify_other file>
+
+file containing additional certificates to search when attempting to locate
+the OCSP response signing certificate. Some responders omit the actual signer's
+certificate from the response: this option can be used to supply the necessary
+certificate in such cases.
+
+=item B<-trust_other>
+
+the certificates specified by the B<-verify_other> option should be explicitly
+trusted and no additional checks will be performed on them. This is useful
+when the complete responder certificate chain is not available or trusting a
+root CA is not appropriate.
+
+=item B<-VAfile file>
+
+file containing explicitly trusted responder certificates. Equivalent to the
+B<-verify_other> and B<-trust_other> options.
+
+=item B<-noverify>
+
+don't attempt to verify the OCSP response signature or the nonce values. This
+option will normally only be used for debugging since it disables all verification
+of the responders certificate.
+
+=item B<-no_intern>
+
+ignore certificates contained in the OCSP response when searching for the
+signers certificate. With this option the signers certificate must be specified
+with either the B<-verify_other> or B<-VAfile> options.
+
+=item B<-no_signature_verify>
+
+don't check the signature on the OCSP response. Since this option tolerates invalid
+signatures on OCSP responses it will normally only be used for testing purposes.
+
+=item B<-no_cert_verify>
+
+don't verify the OCSP response signers certificate at all. Since this option allows
+the OCSP response to be signed by any certificate it should only be used for
+testing purposes.
+
+=item B<-no_chain>
+
+do not use certificates in the response as additional untrusted CA
+certificates.
+
+=item B<-no_cert_checks>
+
+don't perform any additional checks on the OCSP response signers certificate.
+That is do not make any checks to see if the signers certificate is authorised
+to provide the necessary status information: as a result this option should
+only be used for testing purposes.
+
+=item B<-validity_period nsec>, B<-status_age age>
+
+these options specify the range of times, in seconds, which will be tolerated
+in an OCSP response. Each certificate status response includes a B<notBefore> time and
+an optional B<notAfter> time. The current time should fall between these two values, but
+the interval between the two times may be only a few seconds. In practice the OCSP
+responder and clients clocks may not be precisely synchronised and so such a check
+may fail. To avoid this the B<-validity_period> option can be used to specify an
+acceptable error range in seconds, the default value is 5 minutes.
+
+If the B<notAfter> time is omitted from a response then this means that new status
+information is immediately available. In this case the age of the B<notBefore> field
+is checked to see it is not older than B<age> seconds old. By default this additional
+check is not performed.
+
+=back
+
+=head1 OCSP SERVER OPTIONS
+
+=over 4
+
+=item B<-index indexfile>
+
+B<indexfile> is a text index file in B<ca> format containing certificate revocation
+information.
+
+If the B<index> option is specified the B<ocsp> utility is in responder mode, otherwise
+it is in client mode. The request(s) the responder processes can be either specified on
+the command line (using B<issuer> and B<serial> options), supplied in a file (using the
+B<respin> option) or via external OCSP clients (if B<port> or B<url> is specified).
+
+If the B<index> option is present then the B<CA> and B<rsigner> options must also be
+present.
+
+=item B<-CA file>
+
+CA certificate corresponding to the revocation information in B<indexfile>.
+
+=item B<-rsigner file>
+
+The certificate to sign OCSP responses with.
+
+=item B<-rother file>
+
+Additional certificates to include in the OCSP response.
+
+=item B<-resp_no_certs>
+
+Don't include any certificates in the OCSP response.
+
+=item B<-resp_key_id>
+
+Identify the signer certificate using the key ID, default is to use the subject name.
+
+=item B<-rkey file>
+
+The private key to sign OCSP responses with: if not present the file specified in the
+B<rsigner> option is used.
+
+=item B<-port portnum>
+
+Port to listen for OCSP requests on. The port may also be specified using the B<url>
+option.
+
+=item B<-nrequest number>
+
+The OCSP server will exit after receiving B<number> requests, default unlimited. 
+
+=item B<-nmin minutes>, B<-ndays days>
+
+Number of minutes or days when fresh revocation information is available: used in the
+B<nextUpdate> field. If neither option is present then the B<nextUpdate> field is 
+omitted meaning fresh revocation information is immediately available.
+
+=back
+
+=head1 OCSP Response verification.
+
+OCSP Response follows the rules specified in RFC2560.
+
+Initially the OCSP responder certificate is located and the signature on
+the OCSP request checked using the responder certificate's public key.
+
+Then a normal certificate verify is performed on the OCSP responder certificate
+building up a certificate chain in the process. The locations of the trusted
+certificates used to build the chain can be specified by the B<CAfile>
+and B<CApath> options or they will be looked for in the standard OpenSSL
+certificates directory.
+
+If the initial verify fails then the OCSP verify process halts with an
+error.
+
+Otherwise the issuing CA certificate in the request is compared to the OCSP
+responder certificate: if there is a match then the OCSP verify succeeds.
+
+Otherwise the OCSP responder certificate's CA is checked against the issuing
+CA certificate in the request. If there is a match and the OCSPSigning
+extended key usage is present in the OCSP responder certificate then the
+OCSP verify succeeds.
+
+Otherwise the root CA of the OCSP responders CA is checked to see if it
+is trusted for OCSP signing. If it is the OCSP verify succeeds.
+
+If none of these checks is successful then the OCSP verify fails.
+
+What this effectively means if that if the OCSP responder certificate is
+authorised directly by the CA it is issuing revocation information about
+(and it is correctly configured) then verification will succeed.
+
+If the OCSP responder is a "global responder" which can give details about
+multiple CAs and has its own separate certificate chain then its root
+CA can be trusted for OCSP signing. For example:
+
+ openssl x509 -in ocspCA.pem -addtrust OCSPSigning -out trustedCA.pem
+
+Alternatively the responder certificate itself can be explicitly trusted
+with the B<-VAfile> option.
+
+=head1 NOTES
+
+As noted, most of the verify options are for testing or debugging purposes.
+Normally only the B<-CApath>, B<-CAfile> and (if the responder is a 'global
+VA') B<-VAfile> options need to be used.
+
+The OCSP server is only useful for test and demonstration purposes: it is
+not really usable as a full OCSP responder. It contains only a very
+simple HTTP request handling and can only handle the POST form of OCSP
+queries. It also handles requests serially meaning it cannot respond to
+new requests until it has processed the current one. The text index file
+format of revocation is also inefficient for large quantities of revocation
+data.
+
+It is possible to run the B<ocsp> application in responder mode via a CGI
+script using the B<respin> and B<respout> options.
+
+=head1 EXAMPLES
+
+Create an OCSP request and write it to a file:
+
+ openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem -reqout req.der
+
+Send a query to an OCSP responder with URL http://ocsp.myhost.com/ save the 
+response to a file and print it out in text form
+
+ openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem \
+     -url http://ocsp.myhost.com/ -resp_text -respout resp.der
+
+Read in an OCSP response and print out text form:
+
+ openssl ocsp -respin resp.der -text
+
+OCSP server on port 8888 using a standard B<ca> configuration, and a separate
+responder certificate. All requests and responses are printed to a file.
+
+ openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
+	-text -out log.txt
+
+As above but exit after processing one request:
+
+ openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
+     -nrequest 1
+
+Query status information using internally generated request:
+
+ openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
+     -issuer demoCA/cacert.pem -serial 1
+
+Query status information using request read from a file, write response to a
+second file.
+
+ openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
+     -reqin req.der -respout resp.der