Upgrade openssl to version openssl-1.0.1i

16 files changed, 355 insertions, 41 deletions

diff --git a/openssl/doc/apps/asn1parse.pod b/openssl/doc/apps/asn1parse.pod
index f7bb92621..76a765daf 100644
--- a/openssl/doc/apps/asn1parse.pod
+++ b/openssl/doc/apps/asn1parse.pod
@@ -15,6 +15,8 @@ B<openssl> B<asn1parse>
 [B<-length number>]
 [B<-i>]
 [B<-oid filename>]
+[B<-dump>]
+[B<-dlimit num>]
 [B<-strparse offset>]
 [B<-genstr string>]
 [B<-genconf file>]
@@ -64,6 +66,14 @@ indents the output according to the "depth" of the structures.
 a file containing additional OBJECT IDENTIFIERs (OIDs). The format of this
 file is described in the NOTES section below.
 
+=item B<-dump>
+
+dump unknown data in hex format.
+
+=item B<-dlimit num>
+
+like B<-dump>, but only the first B<num> bytes are output.
+
 =item B<-strparse offset>
 
 parse the contents octets of the ASN.1 object starting at B<offset>. This
diff --git a/openssl/doc/apps/ca.pod b/openssl/doc/apps/ca.pod
index 9ff0cc361..c90e6482e 100644
--- a/openssl/doc/apps/ca.pod
+++ b/openssl/doc/apps/ca.pod
@@ -13,6 +13,8 @@ B<openssl> B<ca>
 [B<-name section>]
 [B<-gencrl>]
 [B<-revoke file>]
+[B<-status serial>]
+[B<-updatedb>]
 [B<-crl_reason reason>]
 [B<-crl_hold instruction>]
 [B<-crl_compromise time>]
@@ -26,6 +28,7 @@ B<openssl> B<ca>
 [B<-md arg>]
 [B<-policy arg>]
 [B<-keyfile arg>]
+[B<-keyform PEM|DER>]
 [B<-key arg>]
 [B<-passin arg>]
 [B<-cert file>]
@@ -83,7 +86,7 @@ a single self signed certificate to be signed by the CA.
 
 a file containing a single Netscape signed public key and challenge
 and additional field values to be signed by the CA. See the B<SPKAC FORMAT>
-section for information on the required format.
+section for information on the required input and output format.
 
 =item B<-infiles>
 
@@ -94,7 +97,7 @@ are assumed to the the names of files containing certificate requests.
 
 the output file to output certificates to. The default is standard
 output. The certificate details will also be printed out to this
-file.
+file in PEM format (except that B<-spkac> outputs DER format).
 
 =item B<-outdir directory>
 
@@ -110,6 +113,11 @@ the CA certificate file.
 
 the private key to sign requests with.
 
+=item B<-keyform PEM|DER>
+
+the format of the data in the private key file.
+The default is PEM.
+
 =item B<-key password>
 
 the password used to encrypt the private key. Since on some
@@ -267,6 +275,15 @@ the number of hours before the next CRL is due.
 
 a filename containing a certificate to revoke.
 
+=item B<-status serial>
+
+displays the revocation status of the certificate with the specified
+serial number and exits.
+
+=item B<-updatedb>
+
+Updates the database index to purge expired certificates.
+
 =item B<-crl_reason reason>
 
 revocation reason, where B<reason> is one of: B<unspecified>, B<keyCompromise>,
@@ -499,6 +516,10 @@ the SPKAC and also the required DN components as name value pairs.
 If you need to include the same component twice then it can be
 preceded by a number and a '.'.
 
+When processing SPKAC format, the output is DER if the B<-out>
+flag is used, but PEM format if sending to stdout or the B<-outdir>
+flag is used.
+
 =head1 EXAMPLES
 
 Note: these examples assume that the B<ca> directory structure is
diff --git a/openssl/doc/apps/ciphers.pod b/openssl/doc/apps/ciphers.pod
index f44aa00a2..6086d0a71 100644
--- a/openssl/doc/apps/ciphers.pod
+++ b/openssl/doc/apps/ciphers.pod
@@ -36,7 +36,7 @@ SSL v2 and for SSL v3/TLS v1.
 
 =item B<-V>
 
-Like B<-V>, but include cipher suite codes in output (hex format).
+Like B<-v>, but include cipher suite codes in output (hex format).
 
 =item B<-ssl3>
 
@@ -116,8 +116,8 @@ specified.
 =item B<COMPLEMENTOFDEFAULT>
 
 the ciphers included in B<ALL>, but not enabled by default. Currently
-this is B<ADH>. Note that this rule does not cover B<eNULL>, which is
-not included by B<ALL> (use B<COMPLEMENTOFALL> if necessary).
+this is B<ADH> and B<AECDH>. Note that this rule does not cover B<eNULL>,
+which is not included by B<ALL> (use B<COMPLEMENTOFALL> if necessary).
 
 =item B<ALL>
 
@@ -165,21 +165,58 @@ included.
 =item B<aNULL>
 
 the cipher suites offering no authentication. This is currently the anonymous
-DH algorithms. These cipher suites are vulnerable to a "man in the middle"
-attack and so their use is normally discouraged.
+DH algorithms and anonymous ECDH algorithms. These cipher suites are vulnerable
+to a "man in the middle" attack and so their use is normally discouraged.
 
 =item B<kRSA>, B<RSA>
 
 cipher suites using RSA key exchange.
 
+=item B<kDHr>, B<kDHd>, B<kDH>
+
+cipher suites using DH key agreement and DH certificates signed by CAs with RSA
+and DSS keys or either respectively. Not implemented.
+
 =item B<kEDH>
 
-cipher suites using ephemeral DH key agreement.
+cipher suites using ephemeral DH key agreement, including anonymous cipher
+suites.
 
-=item B<kDHr>, B<kDHd>
+=item B<EDH>
 
-cipher suites using DH key agreement and DH certificates signed by CAs with RSA
-and DSS keys respectively. Not implemented.
+cipher suites using authenticated ephemeral DH key agreement.
+
+=item B<ADH>
+
+anonymous DH cipher suites, note that this does not include anonymous Elliptic
+Curve DH (ECDH) cipher suites.
+
+=item B<DH>
+
+cipher suites using DH, including anonymous DH, ephemeral DH and fixed DH.
+
+=item B<kECDHr>, B<kECDHe>, B<kECDH>
+
+cipher suites using fixed ECDH key agreement signed by CAs with RSA and ECDSA
+keys or either respectively.
+
+=item B<kEECDH>
+
+cipher suites using ephemeral ECDH key agreement, including anonymous
+cipher suites.
+
+=item B<EECDHE>
+
+cipher suites using authenticated ephemeral ECDH key agreement.
+
+=item B<AECDH>
+
+anonymous Elliptic Curve Diffie Hellman cipher suites.
+
+=item B<ECDH>
+
+cipher suites using ECDH key exchange, including anonymous, ephemeral and
+fixed ECDH.
 
 =item B<aRSA>
 
@@ -194,30 +231,39 @@ cipher suites using DSS authentication, i.e. the certificates carry DSS keys.
 cipher suites effectively using DH authentication, i.e. the certificates carry
 DH keys.  Not implemented.
 
+=item B<aECDH>
+
+cipher suites effectively using ECDH authentication, i.e. the certificates
+carry ECDH keys.
+
+=item B<aECDSA>, B<ECDSA>
+
+cipher suites using ECDSA authentication, i.e. the certificates carry ECDSA
+keys.
+
 =item B<kFZA>, B<aFZA>, B<eFZA>, B<FZA>
 
 ciphers suites using FORTEZZA key exchange, authentication, encryption or all
 FORTEZZA algorithms. Not implemented.
 
-=item B<TLSv1>, B<SSLv3>, B<SSLv2>
-
-TLS v1.0, SSL v3.0 or SSL v2.0 cipher suites respectively.
+=item B<TLSv1.2>, B<TLSv1>, B<SSLv3>, B<SSLv2>
 
-=item B<DH>
-
-cipher suites using DH, including anonymous DH.
+TLS v1.2, TLS v1.0, SSL v3.0 or SSL v2.0 cipher suites respectively. Note:
+there are no ciphersuites specific to TLS v1.1.
 
-=item B<ADH>
+=item B<AES128>, B<AES256>, B<AES>
 
-anonymous DH cipher suites.
+cipher suites using 128 bit AES, 256 bit AES or either 128 or 256 bit AES.
 
-=item B<AES>
+=item B<AESGCM>
 
-cipher suites using AES.
+AES in Galois Counter Mode (GCM): these ciphersuites are only supported
+in TLS v1.2.
 
-=item B<CAMELLIA>
+=item B<CAMELLIA128>, B<CAMELLIA256>, B<CAMELLIA>
 
-cipher suites using Camellia.
+cipher suites using 128 bit CAMELLIA, 256 bit CAMELLIA or either 128 or 256 bit
+CAMELLIA.
 
 =item B<3DES>
 
@@ -251,6 +297,10 @@ cipher suites using MD5.
 
 cipher suites using SHA1.
 
+=item B<SHA256>, B<SHA384>
+
+ciphersuites using SHA256 or SHA384.
+
 =item B<aGOST> 
 
 cipher suites using GOST R 34.10 (either 2001 or 94) for authenticaction
@@ -277,6 +327,9 @@ cipher suites, using HMAC based on GOST R 34.11-94.
 
 cipher suites using GOST 28147-89 MAC B<instead of> HMAC.
 
+=item B<PSK>
+
+cipher suites using pre-shared keys (PSK).
 
 =back
 
@@ -423,7 +476,100 @@ Note: these ciphers can also be used in SSL v3.
  TLS_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA  EXP1024-DHE-DSS-RC4-SHA
  TLS_DHE_DSS_WITH_RC4_128_SHA            DHE-DSS-RC4-SHA
 
-=head2 SSL v2.0 cipher suites.
+=head2 Elliptic curve cipher suites.
+
+ TLS_ECDH_RSA_WITH_NULL_SHA              ECDH-RSA-NULL-SHA
+ TLS_ECDH_RSA_WITH_RC4_128_SHA           ECDH-RSA-RC4-SHA
+ TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA      ECDH-RSA-DES-CBC3-SHA
+ TLS_ECDH_RSA_WITH_AES_128_CBC_SHA       ECDH-RSA-AES128-SHA
+ TLS_ECDH_RSA_WITH_AES_256_CBC_SHA       ECDH-RSA-AES256-SHA
+
+ TLS_ECDH_ECDSA_WITH_NULL_SHA            ECDH-ECDSA-NULL-SHA
+ TLS_ECDH_ECDSA_WITH_RC4_128_SHA         ECDH-ECDSA-RC4-SHA
+ TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA    ECDH-ECDSA-DES-CBC3-SHA
+ TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA     ECDH-ECDSA-AES128-SHA
+ TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA     ECDH-ECDSA-AES256-SHA
+
+ TLS_ECDHE_RSA_WITH_NULL_SHA             ECDHE-RSA-NULL-SHA
+ TLS_ECDHE_RSA_WITH_RC4_128_SHA          ECDHE-RSA-RC4-SHA
+ TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA     ECDHE-RSA-DES-CBC3-SHA
+ TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA      ECDHE-RSA-AES128-SHA
+ TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA      ECDHE-RSA-AES256-SHA
+
+ TLS_ECDHE_ECDSA_WITH_NULL_SHA           ECDHE-ECDSA-NULL-SHA
+ TLS_ECDHE_ECDSA_WITH_RC4_128_SHA        ECDHE-ECDSA-RC4-SHA
+ TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA   ECDHE-ECDSA-DES-CBC3-SHA
+ TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA    ECDHE-ECDSA-AES128-SHA
+ TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA    ECDHE-ECDSA-AES256-SHA
+
+ TLS_ECDH_anon_WITH_NULL_SHA             AECDH-NULL-SHA
+ TLS_ECDH_anon_WITH_RC4_128_SHA          AECDH-RC4-SHA
+ TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA     AECDH-DES-CBC3-SHA
+ TLS_ECDH_anon_WITH_AES_128_CBC_SHA      AECDH-AES128-SHA
+ TLS_ECDH_anon_WITH_AES_256_CBC_SHA      AECDH-AES256-SHA
+
+=head2 TLS v1.2 cipher suites
+
+ TLS_RSA_WITH_NULL_SHA256                  NULL-SHA256
+
+ TLS_RSA_WITH_AES_128_CBC_SHA256           AES128-SHA256
+ TLS_RSA_WITH_AES_256_CBC_SHA256           AES256-SHA256
+ TLS_RSA_WITH_AES_128_GCM_SHA256           AES128-GCM-SHA256
+ TLS_RSA_WITH_AES_256_GCM_SHA384           AES256-GCM-SHA384
+
+ TLS_DH_RSA_WITH_AES_128_CBC_SHA256        Not implemented.
+ TLS_DH_RSA_WITH_AES_256_CBC_SHA256        Not implemented.
+ TLS_DH_RSA_WITH_AES_128_GCM_SHA256        Not implemented.
+ TLS_DH_RSA_WITH_AES_256_GCM_SHA384        Not implemented.
+
+ TLS_DH_DSS_WITH_AES_128_CBC_SHA256        Not implemented.
+ TLS_DH_DSS_WITH_AES_256_CBC_SHA256        Not implemented.
+ TLS_DH_DSS_WITH_AES_128_GCM_SHA256        Not implemented.
+ TLS_DH_DSS_WITH_AES_256_GCM_SHA384        Not implemented.
+
+ TLS_DHE_RSA_WITH_AES_128_CBC_SHA256       DHE-RSA-AES128-SHA256
+ TLS_DHE_RSA_WITH_AES_256_CBC_SHA256       DHE-RSA-AES256-SHA256
+ TLS_DHE_RSA_WITH_AES_128_GCM_SHA256       DHE-RSA-AES128-GCM-SHA256
+ TLS_DHE_RSA_WITH_AES_256_GCM_SHA384       DHE-RSA-AES256-GCM-SHA384
+
+ TLS_DHE_DSS_WITH_AES_128_CBC_SHA256       DHE-DSS-AES128-SHA256
+ TLS_DHE_DSS_WITH_AES_256_CBC_SHA256       DHE-DSS-AES256-SHA256
+ TLS_DHE_DSS_WITH_AES_128_GCM_SHA256       DHE-DSS-AES128-GCM-SHA256
+ TLS_DHE_DSS_WITH_AES_256_GCM_SHA384       DHE-DSS-AES256-GCM-SHA384
+
+ TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256      ECDH-RSA-AES128-SHA256
+ TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384      ECDH-RSA-AES256-SHA384
+ TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256      ECDH-RSA-AES128-GCM-SHA256
+ TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384      ECDH-RSA-AES256-GCM-SHA384
+
+ TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256    ECDH-ECDSA-AES128-SHA256
+ TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384    ECDH-ECDSA-AES256-SHA384
+ TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256    ECDH-ECDSA-AES128-GCM-SHA256
+ TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384    ECDH-ECDSA-AES256-GCM-SHA384
+
+ TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256     ECDHE-RSA-AES128-SHA256
+ TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384     ECDHE-RSA-AES256-SHA384
+ TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256     ECDHE-RSA-AES128-GCM-SHA256
+ TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384     ECDHE-RSA-AES256-GCM-SHA384
+
+ TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256   ECDHE-ECDSA-AES128-SHA256
+ TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384   ECDHE-ECDSA-AES256-SHA384
+ TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256   ECDHE-ECDSA-AES128-GCM-SHA256
+ TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384   ECDHE-ECDSA-AES256-GCM-SHA384
+
+ TLS_DH_anon_WITH_AES_128_CBC_SHA256       ADH-AES128-SHA256
+ TLS_DH_anon_WITH_AES_256_CBC_SHA256       ADH-AES256-SHA256
+ TLS_DH_anon_WITH_AES_128_GCM_SHA256       ADH-AES128-GCM-SHA256
+ TLS_DH_anon_WITH_AES_256_GCM_SHA384       ADH-AES256-GCM-SHA384
+
+=head2 Pre shared keying (PSK) cipheruites
+
+ TLS_PSK_WITH_RC4_128_SHA                  PSK-RC4-SHA
+ TLS_PSK_WITH_3DES_EDE_CBC_SHA             PSK-3DES-EDE-CBC-SHA
+ TLS_PSK_WITH_AES_128_CBC_SHA              PSK-AES128-CBC-SHA
+ TLS_PSK_WITH_AES_256_CBC_SHA              PSK-AES256-CBC-SHA
+
+=head2 Deprecated SSL v2.0 cipher suites.
 
  SSL_CK_RC4_128_WITH_MD5                 RC4-MD5
  SSL_CK_RC4_128_EXPORT40_WITH_MD5        EXP-RC4-MD5
@@ -452,6 +598,11 @@ strength:
 
  openssl ciphers -v 'ALL:!ADH:@STRENGTH'
 
+Include all ciphers except ones with no encryption (eNULL) or no
+authentication (aNULL):
+
+ openssl ciphers -v 'ALL:!aNULL'
+
 Include only 3DES ciphers and then place RSA ciphers last:
 
  openssl ciphers -v '3DES:+RSA'
diff --git a/openssl/doc/apps/cms.pod b/openssl/doc/apps/cms.pod
index a76b3e0fd..75b698834 100644
--- a/openssl/doc/apps/cms.pod
+++ b/openssl/doc/apps/cms.pod
@@ -143,7 +143,7 @@ output an error.
 
 =item B<-EncryptedData_encrypt>
 
-Encrypt suppled content using supplied symmetric key and algorithm using a CMS
+Encrypt content using supplied symmetric key and algorithm using a CMS
 B<EncrytedData> type and output the content.
 
 =item B<-sign_receipt>
diff --git a/openssl/doc/apps/crl.pod b/openssl/doc/apps/crl.pod
index 1ad76a5f8..044a9da91 100644
--- a/openssl/doc/apps/crl.pod
+++ b/openssl/doc/apps/crl.pod
@@ -12,6 +12,7 @@ B<openssl> B<crl>
 [B<-text>]
 [B<-in filename>]
 [B<-out filename>]
+[B<-nameopt option>]
 [B<-noout>]
 [B<-hash>]
 [B<-issuer>]
@@ -53,6 +54,11 @@ default.
 
 print out the CRL in text form.
 
+=item B<-nameopt option>
+
+option which determines how the subject or issuer names are displayed. See
+the description of B<-nameopt> in L<x509(1)|x509(1)>.
+
 =item B<-noout>
 
 don't output the encoded version of the CRL.
diff --git a/openssl/doc/apps/dhparam.pod b/openssl/doc/apps/dhparam.pod
index 9edb4ff4e..6e27cf5c1 100644
--- a/openssl/doc/apps/dhparam.pod
+++ b/openssl/doc/apps/dhparam.pod
@@ -12,6 +12,7 @@ B<openssl dhparam>
 [B<-in> I<filename>]
 [B<-out> I<filename>]
 [B<-dsaparam>]
+[B<-check>]
 [B<-noout>]
 [B<-text>]
 [B<-C>]
@@ -64,6 +65,10 @@ exchange more efficient.  Beware that with such DSA-style DH
 parameters, a fresh DH key should be created for each use to
 avoid small-subgroup attacks that may be possible otherwise.
 
+=item B<-check>
+
+check if the parameters are valid primes and generator.
+
 =item B<-2>, B<-5>
 
 The generator to use, either 2 or 5. 2 is the default. If present then the
diff --git a/openssl/doc/apps/dsa.pod b/openssl/doc/apps/dsa.pod
index ddbc9327f..8bf6cc9dc 100644
--- a/openssl/doc/apps/dsa.pod
+++ b/openssl/doc/apps/dsa.pod
@@ -13,6 +13,12 @@ B<openssl> B<dsa>
 [B<-passin arg>]
 [B<-out filename>]
 [B<-passout arg>]
+[B<-aes128>]
+[B<-aes192>]
+[B<-aes256>]
+[B<-camellia128>]
+[B<-camellia192>]
+[B<-camellia256>]
 [B<-des>]
 [B<-des3>]
 [B<-idea>]
@@ -74,10 +80,10 @@ filename.
 the output file password source. For more information about the format of B<arg>
 see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
 
-=item B<-des|-des3|-idea>
+=item B<-aes128|-aes192|-aes256|-camellia128|-camellia192|-camellia256|-des|-des3|-idea>
 
-These options encrypt the private key with the DES, triple DES, or the 
-IDEA ciphers respectively before outputting it. A pass phrase is prompted for.
+These options encrypt the private key with the specified
+cipher before outputting it. A pass phrase is prompted for.
 If none of these options is specified the key is written in plain text. This
 means that using the B<dsa> utility to read in an encrypted key with no
 encryption option can be used to remove the pass phrase from a key, or by
diff --git a/openssl/doc/apps/ecparam.pod b/openssl/doc/apps/ecparam.pod
index 788c074d7..88e9d1e83 100644
--- a/openssl/doc/apps/ecparam.pod
+++ b/openssl/doc/apps/ecparam.pod
@@ -16,7 +16,7 @@ B<openssl ecparam>
 [B<-C>]
 [B<-check>]
 [B<-name arg>]
-[B<-list_curve>]
+[B<-list_curves>]
 [B<-conv_form arg>]
 [B<-param_enc arg>]
 [B<-no_seed>]
diff --git a/openssl/doc/apps/gendsa.pod b/openssl/doc/apps/gendsa.pod
index 8c7f114ca..d9f56be89 100644
--- a/openssl/doc/apps/gendsa.pod
+++ b/openssl/doc/apps/gendsa.pod
@@ -8,6 +8,12 @@ gendsa - generate a DSA private key from a set of parameters
 
 B<openssl> B<gendsa>
 [B<-out filename>]
+[B<-aes128>]
+[B<-aes192>]
+[B<-aes256>]
+[B<-camellia128>]
+[B<-camellia192>]
+[B<-camellia256>]
 [B<-des>]
 [B<-des3>]
 [B<-idea>]
@@ -24,10 +30,10 @@ The B<gendsa> command generates a DSA private key from a DSA parameter file
 
 =over 4
 
-=item B<-des|-des3|-idea>
+=item B<-aes128|-aes192|-aes256|-camellia128|-camellia192|-camellia256|-des|-des3|-idea>
 
-These options encrypt the private key with the DES, triple DES, or the 
-IDEA ciphers respectively before outputting it. A pass phrase is prompted for.
+These options encrypt the private key with specified
+cipher before outputting it. A pass phrase is prompted for.
 If none of these options is specified no encryption is used.
 
 =item B<-rand file(s)>
diff --git a/openssl/doc/apps/genrsa.pod b/openssl/doc/apps/genrsa.pod
index 7dcac2a77..cb03d09b9 100644
--- a/openssl/doc/apps/genrsa.pod
+++ b/openssl/doc/apps/genrsa.pod
@@ -9,6 +9,18 @@ genrsa - generate an RSA private key
 B<openssl> B<genrsa>
 [B<-out filename>]
 [B<-passout arg>]
+[B<-aes128>]
+[B<-aes128>]
+[B<-aes192>]
+[B<-aes256>]
+[B<-camellia128>]
+[B<-camellia192>]
+[B<-camellia256>]
+[B<-aes192>]
+[B<-aes256>]
+[B<-camellia128>]
+[B<-camellia192>]
+[B<-camellia256>]
 [B<-des>]
 [B<-des3>]
 [B<-idea>]
@@ -36,10 +48,10 @@ used.
 the output file password source. For more information about the format of B<arg>
 see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
 
-=item B<-des|-des3|-idea>
+=item B<-aes128|-aes192|-aes256|-camellia128|-camellia192|-camellia256|-des|-des3|-idea>
 
-These options encrypt the private key with the DES, triple DES, or the 
-IDEA ciphers respectively before outputting it. If none of these options is
+These options encrypt the private key with specified
+cipher before outputting it. If none of these options is
 specified no encryption is used. If encryption is used a pass phrase is prompted
 for if it is not supplied via the B<-passout> argument.
 
diff --git a/openssl/doc/apps/rsa.pod b/openssl/doc/apps/rsa.pod
index d7d784d52..21cbf8ee0 100644
--- a/openssl/doc/apps/rsa.pod
+++ b/openssl/doc/apps/rsa.pod
@@ -15,6 +15,12 @@ B<openssl> B<rsa>
 [B<-out filename>]
 [B<-passout arg>]
 [B<-sgckey>]
+[B<-aes128>]
+[B<-aes192>]
+[B<-aes256>]
+[B<-camellia128>]
+[B<-camellia192>]
+[B<-camellia256>]
 [B<-des>]
 [B<-des3>]
 [B<-idea>]
@@ -82,10 +88,10 @@ see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
 use the modified NET algorithm used with some versions of Microsoft IIS and SGC
 keys.
 
-=item B<-des|-des3|-idea>
+=item B<-aes128|-aes192|-aes256|-camellia128|-camellia192|-camellia256|-des|-des3|-idea>
 
-These options encrypt the private key with the DES, triple DES, or the 
-IDEA ciphers respectively before outputting it. A pass phrase is prompted for.
+These options encrypt the private key with the specified
+cipher before outputting it. A pass phrase is prompted for.
 If none of these options is specified the key is written in plain text. This
 means that using the B<rsa> utility to read in an encrypted key with no
 encryption option can be used to remove the pass phrase from a key, or by
diff --git a/openssl/doc/apps/s_client.pod b/openssl/doc/apps/s_client.pod
index 3215b2e8c..b021c730c 100644
--- a/openssl/doc/apps/s_client.pod
+++ b/openssl/doc/apps/s_client.pod
@@ -9,6 +9,7 @@ s_client - SSL/TLS client program
 
 B<openssl> B<s_client>
 [B<-connect host:port>]
+[B<-servername name>]
 [B<-verify depth>]
 [B<-verify_return_error>]
 [B<-cert filename>]
@@ -28,6 +29,7 @@ B<openssl> B<s_client>
 [B<-nbio>]
 [B<-crlf>]
 [B<-ign_eof>]
+[B<-no_ign_eof>]
 [B<-quiet>]
 [B<-ssl2>]
 [B<-ssl3>]
@@ -37,6 +39,7 @@ B<openssl> B<s_client>
 [B<-no_tls1>]
 [B<-bugs>]
 [B<-cipher cipherlist>]
+[B<-serverpref>]
 [B<-starttls protocol>]
 [B<-engine id>]
 [B<-tlsextdebug>]
@@ -44,6 +47,8 @@ B<openssl> B<s_client>
 [B<-sess_out filename>]
 [B<-sess_in filename>]
 [B<-rand file(s)>]
+[B<-status>]
+[B<-nextprotoneg protocols>]
 
 =head1 DESCRIPTION
 
@@ -60,6 +65,10 @@ SSL servers.
 This specifies the host and optional port to connect to. If not specified
 then an attempt is made to connect to the local host on port 4433.
 
+=item B<-servername name>
+
+Set the TLS SNI (Server Name Indication) extension in the ClientHello message.
+
 =item B<-cert certname>
 
 The certificate to use, if one is requested by the server. The default is
@@ -172,6 +181,11 @@ input.
 inhibit printing of session and certificate information.  This implicitly
 turns on B<-ign_eof> as well.
 
+=item B<-no_ign_eof>
+
+shut down the connection when end of file is reached in the input.
+Can be used to override the implicit B<-ign_eof> after B<-quiet>.
+
 =item B<-psk_identity identity>
 
 Use the PSK identity B<identity> when using a PSK cipher suite.
@@ -205,6 +219,10 @@ the server determines which cipher suite is used it should take the first
 supported cipher in the list sent by the client. See the B<ciphers>
 command for more information.
 
+=item B<-serverpref>
+
+use the server's cipher preferences; only used for SSLV2.
+
 =item B<-starttls protocol>
 
 send the protocol-specific message(s) to switch to TLS for communication.
@@ -243,6 +261,22 @@ Multiple files can be specified separated by a OS-dependent character.
 The separator is B<;> for MS-Windows, B<,> for OpenVMS, and B<:> for
 all others.
 
+=item B<-status>
+
+sends a certificate status request to the server (OCSP stapling). The server
+response (if any) is printed out.
+
+=item B<-nextprotoneg protocols>
+
+enable Next Protocol Negotiation TLS extension and provide a list of
+comma-separated protocol names that the client should advertise
+support for. The list should contain most wanted protocols first.
+Protocol names are printable ASCII strings, for example "http/1.1" or
+"spdy/3".
+Empty list of protocols is treated specially and will cause the client to
+advertise support for the TLS extension but disconnect just after
+reciving ServerHello with a list of server supported protocols.
+
 =back
 
 =head1 CONNECTED COMMANDS
diff --git a/openssl/doc/apps/s_server.pod b/openssl/doc/apps/s_server.pod
index f9b9ca532..2105b603b 100644
--- a/openssl/doc/apps/s_server.pod
+++ b/openssl/doc/apps/s_server.pod
@@ -35,6 +35,7 @@ B<openssl> B<s_server>
 [B<-CAfile filename>]
 [B<-nocert>]
 [B<-cipher cipherlist>]
+[B<-serverpref>]
 [B<-quiet>]
 [B<-no_tmp_rsa>]
 [B<-ssl2>]
@@ -55,6 +56,11 @@ B<openssl> B<s_server>
 [B<-no_ticket>]
 [B<-id_prefix arg>]
 [B<-rand file(s)>]
+[B<-status>]
+[B<-status_verbose>]
+[B<-status_timeout nsec>]
+[B<-status_url url>]
+[B<-nextprotoneg protocols>]
 
 =head1 DESCRIPTION
 
@@ -150,6 +156,9 @@ the client. With the B<-verify> option a certificate is requested but the
 client does not have to send one, with the B<-Verify> option the client
 must supply a certificate or an error occurs.
 
+If the ciphersuite cannot request a client certificate (for example an
+anonymous ciphersuite or PSK) this option has no effect.
+
 =item B<-crl_check>, B<-crl_check_all>
 
 Check the peer certificate has not been revoked by its CA.
@@ -231,6 +240,10 @@ also included in the server list is used. Because the client specifies
 the preference order, the order of the server cipherlist irrelevant. See
 the B<ciphers> command for more information.
 
+=item B<-serverpref>
+
+use the server's cipher preferences, rather than the client's preferences.
+
 =item B<-tlsextdebug>
 
 print out a hex dump of any TLS extensions received from the server.
@@ -282,6 +295,33 @@ Multiple files can be specified separated by a OS-dependent character.
 The separator is B<;> for MS-Windows, B<,> for OpenVMS, and B<:> for
 all others.
 
+=item B<-status>
+
+enables certificate status request support (aka OCSP stapling).
+
+=item B<-status_verbose>
+
+enables certificate status request support (aka OCSP stapling) and gives
+a verbose printout of the OCSP response.
+
+=item B<-status_timeout nsec>
+
+sets the timeout for OCSP response to B<nsec> seconds.
+
+=item B<-status_url url>
+
+sets a fallback responder URL to use if no responder URL is present in the
+server certificate. Without this option an error is returned if the server
+certificate does not contain a responder address.
+
+=item B<-nextprotoneg protocols>
+
+enable Next Protocol Negotiation TLS extension and provide a
+comma-separated list of supported protocol names.
+The list should contain most wanted protocols first.
+Protocol names are printable ASCII strings, for example "http/1.1" or
+"spdy/3".
+
 =back
 
 =head1 CONNECTED COMMANDS
diff --git a/openssl/doc/apps/verify.pod b/openssl/doc/apps/verify.pod
index f35d40295..0c8e4926c 100644
--- a/openssl/doc/apps/verify.pod
+++ b/openssl/doc/apps/verify.pod
@@ -48,7 +48,6 @@ of the B<x509> utility). Under Unix the B<c_rehash> script will automatically
 create symbolic links to a directory of certificates.
 
 =item B<-CAfile file>
-
 A file of trusted certificates. The file should contain multiple certificates
 in PEM format concatenated together.
 
diff --git a/openssl/doc/apps/x509.pod b/openssl/doc/apps/x509.pod
index d2d9eb812..6109389e0 100644
--- a/openssl/doc/apps/x509.pod
+++ b/openssl/doc/apps/x509.pod
@@ -19,6 +19,7 @@ B<openssl> B<x509>
 [B<-hash>]
 [B<-subject_hash>]
 [B<-issuer_hash>]
+[B<-ocspid>]
 [B<-subject>]
 [B<-issuer>]
 [B<-nameopt option>]
@@ -28,6 +29,7 @@ B<openssl> B<x509>
 [B<-enddate>]
 [B<-purpose>]
 [B<-dates>]
+[B<-checkend num>]
 [B<-modulus>]
 [B<-pubkey>]
 [B<-fingerprint>]
@@ -42,6 +44,7 @@ B<openssl> B<x509>
 [B<-days arg>]
 [B<-set_serial n>]
 [B<-signkey filename>]
+[B<-passin arg>]
 [B<-x509toreq>]
 [B<-req>]
 [B<-CA filename>]
@@ -49,6 +52,7 @@ B<openssl> B<x509>
 [B<-CAcreateserial>]
 [B<-CAserial filename>]
 [B<-text>]
+[B<-certopt option>]
 [B<-C>]
 [B<-md2|-md5|-sha1|-mdc2>]
 [B<-clrext>]
@@ -159,6 +163,10 @@ name.
 
 outputs the "hash" of the certificate issuer name.
 
+=item B<-ocspid>
+
+outputs the OCSP hash values for the subject name and public key.
+
 =item B<-hash>
 
 synonym for "-subject_hash" for backward compatibility reasons.
@@ -208,6 +216,11 @@ prints out the expiry date of the certificate, that is the notAfter date.
 
 prints out the start and expiry dates of a certificate.
 
+=item B<-checkend arg>
+
+checks if the certificate expires within the next B<arg> seconds and exits
+non-zero if yes it will expire or zero if not.
+
 =item B<-fingerprint>
 
 prints out the digest of the DER encoded version of the whole certificate
@@ -313,6 +326,11 @@ If the input is a certificate request then a self signed certificate
 is created using the supplied private key using the subject name in
 the request.
 
+=item B<-passin arg>
+
+the key password source. For more information about the format of B<arg>
+see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
+
 =item B<-clrext>
 
 delete any extensions from a certificate. This option is used when a
@@ -468,7 +486,7 @@ using the format \UXXXX for 16 bits and \WXXXXXXXX for 32 bits.
 Also if this option is off any UTF8Strings will be converted to their
 character form first.
 
-=item B<no_type>
+=item B<ignore_type>
 
 this option does not attempt to interpret multibyte characters in any
 way. That is their content octets are merely dumped as though one octet
diff --git a/openssl/doc/apps/x509v3_config.pod b/openssl/doc/apps/x509v3_config.pod
index 13ff85b17..c82cea1da 100644
--- a/openssl/doc/apps/x509v3_config.pod
+++ b/openssl/doc/apps/x509v3_config.pod
@@ -174,7 +174,7 @@ The IP address used in the B<IP> options can be in either IPv4 or IPv6 format.
 
 The value of B<dirName> should point to a section containing the distinguished
 name to use as a set of name value pairs. Multi values AVAs can be formed by
-preceeding the name with a B<+> character.
+prefacing the name with a B<+> character.
 
 otherName can include arbitrary data associated with an OID: the value
 should be the OID followed by a semicolon and the content in standard