Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 128 insertions, 0 deletions

diff --git a/openssl/doc/crypto/BIO_ctrl.pod b/openssl/doc/crypto/BIO_ctrl.pod
new file mode 100644
index 000000000..722e8b8f4
--- /dev/null
+++ b/openssl/doc/crypto/BIO_ctrl.pod
@@ -0,0 +1,128 @@
+=pod
+
+=head1 NAME
+
+BIO_ctrl, BIO_callback_ctrl, BIO_ptr_ctrl, BIO_int_ctrl, BIO_reset,
+BIO_seek, BIO_tell, BIO_flush, BIO_eof, BIO_set_close, BIO_get_close,
+BIO_pending, BIO_wpending, BIO_ctrl_pending, BIO_ctrl_wpending,
+BIO_get_info_callback, BIO_set_info_callback - BIO control operations
+
+=head1 SYNOPSIS
+
+ #include <openssl/bio.h>
+
+ long BIO_ctrl(BIO *bp,int cmd,long larg,void *parg);
+ long BIO_callback_ctrl(BIO *b, int cmd, void (*fp)(struct bio_st *, int, const char *, int, long, long));
+ char *	BIO_ptr_ctrl(BIO *bp,int cmd,long larg);
+ long BIO_int_ctrl(BIO *bp,int cmd,long larg,int iarg);
+
+ int BIO_reset(BIO *b);
+ int BIO_seek(BIO *b, int ofs);
+ int BIO_tell(BIO *b);
+ int BIO_flush(BIO *b);
+ int BIO_eof(BIO *b);
+ int BIO_set_close(BIO *b,long flag);
+ int BIO_get_close(BIO *b);
+ int BIO_pending(BIO *b);
+ int BIO_wpending(BIO *b);
+ size_t BIO_ctrl_pending(BIO *b);
+ size_t BIO_ctrl_wpending(BIO *b);
+
+ int BIO_get_info_callback(BIO *b,bio_info_cb **cbp);
+ int BIO_set_info_callback(BIO *b,bio_info_cb *cb);
+
+ typedef void bio_info_cb(BIO *b, int oper, const char *ptr, int arg1, long arg2, long arg3);
+
+=head1 DESCRIPTION
+
+BIO_ctrl(), BIO_callback_ctrl(), BIO_ptr_ctrl() and BIO_int_ctrl()
+are BIO "control" operations taking arguments of various types.
+These functions are not normally called directly, various macros
+are used instead. The standard macros are described below, macros
+specific to a particular type of BIO are described in the specific
+BIOs manual page as well as any special features of the standard
+calls.
+
+BIO_reset() typically resets a BIO to some initial state, in the case
+of file related BIOs for example it rewinds the file pointer to the
+start of the file.
+
+BIO_seek() resets a file related BIO's (that is file descriptor and
+FILE BIOs) file position pointer to B<ofs> bytes from start of file.
+
+BIO_tell() returns the current file position of a file related BIO.
+
+BIO_flush() normally writes out any internally buffered data, in some
+cases it is used to signal EOF and that no more data will be written.
+
+BIO_eof() returns 1 if the BIO has read EOF, the precise meaning of
+"EOF" varies according to the BIO type.
+
+BIO_set_close() sets the BIO B<b> close flag to B<flag>. B<flag> can
+take the value BIO_CLOSE or BIO_NOCLOSE. Typically BIO_CLOSE is used
+in a source/sink BIO to indicate that the underlying I/O stream should
+be closed when the BIO is freed.
+
+BIO_get_close() returns the BIOs close flag.
+
+BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpending()
+return the number of pending characters in the BIOs read and write buffers.
+Not all BIOs support these calls. BIO_ctrl_pending() and BIO_ctrl_wpending()
+return a size_t type and are functions, BIO_pending() and BIO_wpending() are
+macros which call BIO_ctrl().
+
+=head1 RETURN VALUES
+
+BIO_reset() normally returns 1 for success and 0 or -1 for failure. File
+BIOs are an exception, they return 0 for success and -1 for failure.
+
+BIO_seek() and BIO_tell() both return the current file position on success
+and -1 for failure, except file BIOs which for BIO_seek() always return 0
+for success and -1 for failure.
+
+BIO_flush() returns 1 for success and 0 or -1 for failure.
+
+BIO_eof() returns 1 if EOF has been reached 0 otherwise.
+
+BIO_set_close() always returns 1.
+
+BIO_get_close() returns the close flag value: BIO_CLOSE or BIO_NOCLOSE.
+
+BIO_pending(), BIO_ctrl_pending(), BIO_wpending() and BIO_ctrl_wpending()
+return the amount of pending data.
+
+=head1 NOTES
+
+BIO_flush(), because it can write data may return 0 or -1 indicating
+that the call should be retried later in a similar manner to BIO_write(). 
+The BIO_should_retry() call should be used and appropriate action taken
+is the call fails.
+
+The return values of BIO_pending() and BIO_wpending() may not reliably
+determine the amount of pending data in all cases. For example in the
+case of a file BIO some data may be available in the FILE structures
+internal buffers but it is not possible to determine this in a
+portably way. For other types of BIO they may not be supported.
+
+Filter BIOs if they do not internally handle a particular BIO_ctrl()
+operation usually pass the operation to the next BIO in the chain.
+This often means there is no need to locate the required BIO for
+a particular operation, it can be called on a chain and it will
+be automatically passed to the relevant BIO. However this can cause
+unexpected results: for example no current filter BIOs implement
+BIO_seek(), but this may still succeed if the chain ends in a FILE
+or file descriptor BIO.
+
+Source/sink BIOs return an 0 if they do not recognize the BIO_ctrl()
+operation.
+
+=head1 BUGS
+
+Some of the return values are ambiguous and care should be taken. In
+particular a return value of 0 can be returned if an operation is not
+supported, if an error occurred, if EOF has not been reached and in
+the case of BIO_seek() on a file BIO for a successful operation. 
+
+=head1 SEE ALSO
+
+TBA