Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 255 insertions, 0 deletions

diff --git a/openssl/doc/crypto/des_modes.pod b/openssl/doc/crypto/des_modes.pod
new file mode 100644
index 000000000..e883ca8fd
--- /dev/null
+++ b/openssl/doc/crypto/des_modes.pod
@@ -0,0 +1,255 @@
+=pod
+
+=for comment openssl_manual_section:7
+
+=head1 NAME
+
+des_modes - the variants of DES and other crypto algorithms of OpenSSL
+
+=head1 DESCRIPTION
+
+Several crypto algorithms for OpenSSL can be used in a number of modes.  Those
+are used for using block ciphers in a way similar to stream ciphers, among
+other things.
+
+=head1 OVERVIEW
+
+=head2 Electronic Codebook Mode (ECB)
+
+Normally, this is found as the function I<algorithm>_ecb_encrypt().
+
+=over 2
+
+=item *
+
+64 bits are enciphered at a time.
+
+=item *
+
+The order of the blocks can be rearranged without detection.
+
+=item *
+
+The same plaintext block always produces the same ciphertext block
+(for the same key) making it vulnerable to a 'dictionary attack'.
+
+=item *
+
+An error will only affect one ciphertext block.
+
+=back
+
+=head2 Cipher Block Chaining Mode (CBC)
+
+Normally, this is found as the function I<algorithm>_cbc_encrypt().
+Be aware that des_cbc_encrypt() is not really DES CBC (it does
+not update the IV); use des_ncbc_encrypt() instead.
+
+=over 2
+
+=item *
+
+a multiple of 64 bits are enciphered at a time.
+
+=item *
+
+The CBC mode produces the same ciphertext whenever the same
+plaintext is encrypted using the same key and starting variable.
+
+=item *
+
+The chaining operation makes the ciphertext blocks dependent on the
+current and all preceding plaintext blocks and therefore blocks can not
+be rearranged.
+
+=item *
+
+The use of different starting variables prevents the same plaintext
+enciphering to the same ciphertext.
+
+=item *
+
+An error will affect the current and the following ciphertext blocks.
+
+=back
+
+=head2 Cipher Feedback Mode (CFB)
+
+Normally, this is found as the function I<algorithm>_cfb_encrypt().
+
+=over 2
+
+=item *
+
+a number of bits (j) <= 64 are enciphered at a time.
+
+=item *
+
+The CFB mode produces the same ciphertext whenever the same
+plaintext is encrypted using the same key and starting variable.
+
+=item *
+
+The chaining operation makes the ciphertext variables dependent on the
+current and all preceding variables and therefore j-bit variables are
+chained together and can not be rearranged.
+
+=item *
+
+The use of different starting variables prevents the same plaintext
+enciphering to the same ciphertext.
+
+=item *
+
+The strength of the CFB mode depends on the size of k (maximal if
+j == k).  In my implementation this is always the case.
+
+=item *
+
+Selection of a small value for j will require more cycles through
+the encipherment algorithm per unit of plaintext and thus cause
+greater processing overheads.
+
+=item *
+
+Only multiples of j bits can be enciphered.
+
+=item *
+
+An error will affect the current and the following ciphertext variables.
+
+=back
+
+=head2 Output Feedback Mode (OFB)
+
+Normally, this is found as the function I<algorithm>_ofb_encrypt().
+
+=over 2
+
+
+=item *
+
+a number of bits (j) <= 64 are enciphered at a time.
+
+=item *
+
+The OFB mode produces the same ciphertext whenever the same
+plaintext enciphered using the same key and starting variable.  More
+over, in the OFB mode the same key stream is produced when the same
+key and start variable are used.  Consequently, for security reasons
+a specific start variable should be used only once for a given key.
+
+=item *
+
+The absence of chaining makes the OFB more vulnerable to specific attacks.
+
+=item *
+
+The use of different start variables values prevents the same
+plaintext enciphering to the same ciphertext, by producing different
+key streams.
+
+=item *
+
+Selection of a small value for j will require more cycles through
+the encipherment algorithm per unit of plaintext and thus cause
+greater processing overheads.
+
+=item *
+
+Only multiples of j bits can be enciphered.
+
+=item *
+
+OFB mode of operation does not extend ciphertext errors in the
+resultant plaintext output.  Every bit error in the ciphertext causes
+only one bit to be in error in the deciphered plaintext.
+
+=item *
+
+OFB mode is not self-synchronizing.  If the two operation of
+encipherment and decipherment get out of synchronism, the system needs
+to be re-initialized.
+
+=item *
+
+Each re-initialization should use a value of the start variable
+different from the start variable values used before with the same
+key.  The reason for this is that an identical bit stream would be
+produced each time from the same parameters.  This would be
+susceptible to a 'known plaintext' attack.
+
+=back
+
+=head2 Triple ECB Mode
+
+Normally, this is found as the function I<algorithm>_ecb3_encrypt().
+
+=over 2
+
+=item *
+
+Encrypt with key1, decrypt with key2 and encrypt with key3 again.
+
+=item *
+
+As for ECB encryption but increases the key length to 168 bits.
+There are theoretic attacks that can be used that make the effective
+key length 112 bits, but this attack also requires 2^56 blocks of
+memory, not very likely, even for the NSA.
+
+=item *
+
+If both keys are the same it is equivalent to encrypting once with
+just one key.
+
+=item *
+
+If the first and last key are the same, the key length is 112 bits.
+There are attacks that could reduce the effective key strength
+to only slightly more than 56 bits, but these require a lot of memory.
+
+=item *
+
+If all 3 keys are the same, this is effectively the same as normal
+ecb mode.
+
+=back
+
+=head2 Triple CBC Mode
+
+Normally, this is found as the function I<algorithm>_ede3_cbc_encrypt().
+
+=over 2
+
+
+=item *
+
+Encrypt with key1, decrypt with key2 and then encrypt with key3.
+
+=item *
+
+As for CBC encryption but increases the key length to 168 bits with
+the same restrictions as for triple ecb mode.
+
+=back
+
+=head1 NOTES
+
+This text was been written in large parts by Eric Young in his original
+documentation for SSLeay, the predecessor of OpenSSL.  In turn, he attributed
+it to:
+
+	AS 2805.5.2
+	Australian Standard
+	Electronic funds transfer - Requirements for interfaces,
+	Part 5.2: Modes of operation for an n-bit block cipher algorithm
+	Appendix A
+
+=head1 SEE ALSO
+
+L<blowfish(3)|blowfish(3)>, L<des(3)|des(3)>, L<idea(3)|idea(3)>,
+L<rc2(3)|rc2(3)>
+
+=cut
+