Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 294 insertions, 0 deletions

diff --git a/openssl/doc/crypto/lhash.pod b/openssl/doc/crypto/lhash.pod
new file mode 100644
index 000000000..dcdbb43a8
--- /dev/null
+++ b/openssl/doc/crypto/lhash.pod
@@ -0,0 +1,294 @@
+=pod
+
+=head1 NAME
+
+lh_new, lh_free, lh_insert, lh_delete, lh_retrieve, lh_doall, lh_doall_arg, lh_error - dynamic hash table
+
+=head1 SYNOPSIS
+
+ #include <openssl/lhash.h>
+
+ LHASH *lh_new(LHASH_HASH_FN_TYPE hash, LHASH_COMP_FN_TYPE compare);
+ void lh_free(LHASH *table);
+
+ void *lh_insert(LHASH *table, void *data);
+ void *lh_delete(LHASH *table, void *data);
+ void *lh_retrieve(LHASH *table, void *data);
+
+ void lh_doall(LHASH *table, LHASH_DOALL_FN_TYPE func);
+ void lh_doall_arg(LHASH *table, LHASH_DOALL_ARG_FN_TYPE func,
+          void *arg);
+
+ int lh_error(LHASH *table);
+
+ typedef int (*LHASH_COMP_FN_TYPE)(const void *, const void *);
+ typedef unsigned long (*LHASH_HASH_FN_TYPE)(const void *);
+ typedef void (*LHASH_DOALL_FN_TYPE)(const void *);
+ typedef void (*LHASH_DOALL_ARG_FN_TYPE)(const void *, const void *);
+
+=head1 DESCRIPTION
+
+This library implements dynamic hash tables. The hash table entries
+can be arbitrary structures. Usually they consist of key and value
+fields.
+
+lh_new() creates a new B<LHASH> structure to store arbitrary data
+entries, and provides the 'hash' and 'compare' callbacks to be used in
+organising the table's entries.  The B<hash> callback takes a pointer
+to a table entry as its argument and returns an unsigned long hash
+value for its key field.  The hash value is normally truncated to a
+power of 2, so make sure that your hash function returns well mixed
+low order bits.  The B<compare> callback takes two arguments (pointers
+to two hash table entries), and returns 0 if their keys are equal,
+non-zero otherwise.  If your hash table will contain items of some
+particular type and the B<hash> and B<compare> callbacks hash/compare
+these types, then the B<DECLARE_LHASH_HASH_FN> and
+B<IMPLEMENT_LHASH_COMP_FN> macros can be used to create callback
+wrappers of the prototypes required by lh_new().  These provide
+per-variable casts before calling the type-specific callbacks written
+by the application author.  These macros, as well as those used for
+the "doall" callbacks, are defined as;
+
+ #define DECLARE_LHASH_HASH_FN(f_name,o_type) \
+         unsigned long f_name##_LHASH_HASH(const void *);
+ #define IMPLEMENT_LHASH_HASH_FN(f_name,o_type) \
+         unsigned long f_name##_LHASH_HASH(const void *arg) { \
+                 o_type a = (o_type)arg; \
+                 return f_name(a); }
+ #define LHASH_HASH_FN(f_name) f_name##_LHASH_HASH
+
+ #define DECLARE_LHASH_COMP_FN(f_name,o_type) \
+         int f_name##_LHASH_COMP(const void *, const void *);
+ #define IMPLEMENT_LHASH_COMP_FN(f_name,o_type) \
+         int f_name##_LHASH_COMP(const void *arg1, const void *arg2) { \
+                 o_type a = (o_type)arg1; \
+                 o_type b = (o_type)arg2; \
+                 return f_name(a,b); }
+ #define LHASH_COMP_FN(f_name) f_name##_LHASH_COMP
+
+ #define DECLARE_LHASH_DOALL_FN(f_name,o_type) \
+         void f_name##_LHASH_DOALL(const void *);
+ #define IMPLEMENT_LHASH_DOALL_FN(f_name,o_type) \
+         void f_name##_LHASH_DOALL(const void *arg) { \
+                 o_type a = (o_type)arg; \
+                 f_name(a); }
+ #define LHASH_DOALL_FN(f_name) f_name##_LHASH_DOALL
+
+ #define DECLARE_LHASH_DOALL_ARG_FN(f_name,o_type,a_type) \
+         void f_name##_LHASH_DOALL_ARG(const void *, const void *);
+ #define IMPLEMENT_LHASH_DOALL_ARG_FN(f_name,o_type,a_type) \
+         void f_name##_LHASH_DOALL_ARG(const void *arg1, const void *arg2) { \
+                 o_type a = (o_type)arg1; \
+                 a_type b = (a_type)arg2; \
+                 f_name(a,b); }
+ #define LHASH_DOALL_ARG_FN(f_name) f_name##_LHASH_DOALL_ARG
+
+An example of a hash table storing (pointers to) structures of type 'STUFF'
+could be defined as follows;
+
+ /* Calculates the hash value of 'tohash' (implemented elsewhere) */
+ unsigned long STUFF_hash(const STUFF *tohash);
+ /* Orders 'arg1' and 'arg2' (implemented elsewhere) */
+ int STUFF_cmp(const STUFF *arg1, const STUFF *arg2);
+ /* Create the type-safe wrapper functions for use in the LHASH internals */
+ static IMPLEMENT_LHASH_HASH_FN(STUFF_hash, const STUFF *)
+ static IMPLEMENT_LHASH_COMP_FN(STUFF_cmp, const STUFF *);
+ /* ... */
+ int main(int argc, char *argv[]) {
+         /* Create the new hash table using the hash/compare wrappers */
+         LHASH *hashtable = lh_new(LHASH_HASH_FN(STUFF_hash),
+                                   LHASH_COMP_FN(STUFF_cmp));
+	 /* ... */
+ }
+
+lh_free() frees the B<LHASH> structure B<table>. Allocated hash table
+entries will not be freed; consider using lh_doall() to deallocate any
+remaining entries in the hash table (see below).
+
+lh_insert() inserts the structure pointed to by B<data> into B<table>.
+If there already is an entry with the same key, the old value is
+replaced. Note that lh_insert() stores pointers, the data are not
+copied.
+
+lh_delete() deletes an entry from B<table>.
+
+lh_retrieve() looks up an entry in B<table>. Normally, B<data> is
+a structure with the key field(s) set; the function will return a
+pointer to a fully populated structure.
+
+lh_doall() will, for every entry in the hash table, call B<func> with
+the data item as its parameter.  For lh_doall() and lh_doall_arg(),
+function pointer casting should be avoided in the callbacks (see
+B<NOTE>) - instead, either declare the callbacks to match the
+prototype required in lh_new() or use the declare/implement macros to
+create type-safe wrappers that cast variables prior to calling your
+type-specific callbacks.  An example of this is illustrated here where
+the callback is used to cleanup resources for items in the hash table
+prior to the hashtable itself being deallocated:
+
+ /* Cleans up resources belonging to 'a' (this is implemented elsewhere) */
+ void STUFF_cleanup(STUFF *a);
+ /* Implement a prototype-compatible wrapper for "STUFF_cleanup" */
+ IMPLEMENT_LHASH_DOALL_FN(STUFF_cleanup, STUFF *)
+         /* ... then later in the code ... */
+ /* So to run "STUFF_cleanup" against all items in a hash table ... */
+ lh_doall(hashtable, LHASH_DOALL_FN(STUFF_cleanup));
+ /* Then the hash table itself can be deallocated */
+ lh_free(hashtable);
+
+When doing this, be careful if you delete entries from the hash table
+in your callbacks: the table may decrease in size, moving the item
+that you are currently on down lower in the hash table - this could
+cause some entries to be skipped during the iteration.  The second
+best solution to this problem is to set hash-E<gt>down_load=0 before
+you start (which will stop the hash table ever decreasing in size).
+The best solution is probably to avoid deleting items from the hash
+table inside a "doall" callback!
+
+lh_doall_arg() is the same as lh_doall() except that B<func> will be
+called with B<arg> as the second argument and B<func> should be of
+type B<LHASH_DOALL_ARG_FN_TYPE> (a callback prototype that is passed
+both the table entry and an extra argument).  As with lh_doall(), you
+can instead choose to declare your callback with a prototype matching
+the types you are dealing with and use the declare/implement macros to
+create compatible wrappers that cast variables before calling your
+type-specific callbacks.  An example of this is demonstrated here
+(printing all hash table entries to a BIO that is provided by the
+caller):
+
+ /* Prints item 'a' to 'output_bio' (this is implemented elsewhere) */
+ void STUFF_print(const STUFF *a, BIO *output_bio);
+ /* Implement a prototype-compatible wrapper for "STUFF_print" */
+ static IMPLEMENT_LHASH_DOALL_ARG_FN(STUFF_print, const STUFF *, BIO *)
+         /* ... then later in the code ... */
+ /* Print out the entire hashtable to a particular BIO */
+ lh_doall_arg(hashtable, LHASH_DOALL_ARG_FN(STUFF_print), logging_bio);
+ 
+lh_error() can be used to determine if an error occurred in the last
+operation. lh_error() is a macro.
+
+=head1 RETURN VALUES
+
+lh_new() returns B<NULL> on error, otherwise a pointer to the new
+B<LHASH> structure.
+
+When a hash table entry is replaced, lh_insert() returns the value
+being replaced. B<NULL> is returned on normal operation and on error.
+
+lh_delete() returns the entry being deleted.  B<NULL> is returned if
+there is no such value in the hash table.
+
+lh_retrieve() returns the hash table entry if it has been found,
+B<NULL> otherwise.
+
+lh_error() returns 1 if an error occurred in the last operation, 0
+otherwise.
+
+lh_free(), lh_doall() and lh_doall_arg() return no values.
+
+=head1 NOTE
+
+The various LHASH macros and callback types exist to make it possible
+to write type-safe code without resorting to function-prototype
+casting - an evil that makes application code much harder to
+audit/verify and also opens the window of opportunity for stack
+corruption and other hard-to-find bugs.  It also, apparently, violates
+ANSI-C.
+
+The LHASH code regards table entries as constant data.  As such, it
+internally represents lh_insert()'d items with a "const void *"
+pointer type.  This is why callbacks such as those used by lh_doall()
+and lh_doall_arg() declare their prototypes with "const", even for the
+parameters that pass back the table items' data pointers - for
+consistency, user-provided data is "const" at all times as far as the
+LHASH code is concerned.  However, as callers are themselves providing
+these pointers, they can choose whether they too should be treating
+all such parameters as constant.
+
+As an example, a hash table may be maintained by code that, for
+reasons of encapsulation, has only "const" access to the data being
+indexed in the hash table (ie. it is returned as "const" from
+elsewhere in their code) - in this case the LHASH prototypes are
+appropriate as-is.  Conversely, if the caller is responsible for the
+life-time of the data in question, then they may well wish to make
+modifications to table item passed back in the lh_doall() or
+lh_doall_arg() callbacks (see the "STUFF_cleanup" example above).  If
+so, the caller can either cast the "const" away (if they're providing
+the raw callbacks themselves) or use the macros to declare/implement
+the wrapper functions without "const" types.
+
+Callers that only have "const" access to data they're indexing in a
+table, yet declare callbacks without constant types (or cast the
+"const" away themselves), are therefore creating their own risks/bugs
+without being encouraged to do so by the API.  On a related note,
+those auditing code should pay special attention to any instances of
+DECLARE/IMPLEMENT_LHASH_DOALL_[ARG_]_FN macros that provide types
+without any "const" qualifiers.
+
+=head1 BUGS
+
+lh_insert() returns B<NULL> both for success and error.
+
+=head1 INTERNALS
+
+The following description is based on the SSLeay documentation:
+
+The B<lhash> library implements a hash table described in the
+I<Communications of the ACM> in 1991.  What makes this hash table
+different is that as the table fills, the hash table is increased (or
+decreased) in size via OPENSSL_realloc().  When a 'resize' is done, instead of
+all hashes being redistributed over twice as many 'buckets', one
+bucket is split.  So when an 'expand' is done, there is only a minimal
+cost to redistribute some values.  Subsequent inserts will cause more
+single 'bucket' redistributions but there will never be a sudden large
+cost due to redistributing all the 'buckets'.
+
+The state for a particular hash table is kept in the B<LHASH> structure.
+The decision to increase or decrease the hash table size is made
+depending on the 'load' of the hash table.  The load is the number of
+items in the hash table divided by the size of the hash table.  The
+default values are as follows.  If (hash->up_load E<lt> load) =E<gt>
+expand.  if (hash-E<gt>down_load E<gt> load) =E<gt> contract.  The
+B<up_load> has a default value of 1 and B<down_load> has a default value
+of 2.  These numbers can be modified by the application by just
+playing with the B<up_load> and B<down_load> variables.  The 'load' is
+kept in a form which is multiplied by 256.  So
+hash-E<gt>up_load=8*256; will cause a load of 8 to be set.
+
+If you are interested in performance the field to watch is
+num_comp_calls.  The hash library keeps track of the 'hash' value for
+each item so when a lookup is done, the 'hashes' are compared, if
+there is a match, then a full compare is done, and
+hash-E<gt>num_comp_calls is incremented.  If num_comp_calls is not equal
+to num_delete plus num_retrieve it means that your hash function is
+generating hashes that are the same for different values.  It is
+probably worth changing your hash function if this is the case because
+even if your hash table has 10 items in a 'bucket', it can be searched
+with 10 B<unsigned long> compares and 10 linked list traverses.  This
+will be much less expensive that 10 calls to your compare function.
+
+lh_strhash() is a demo string hashing function:
+
+ unsigned long lh_strhash(const char *c);
+
+Since the B<LHASH> routines would normally be passed structures, this
+routine would not normally be passed to lh_new(), rather it would be
+used in the function passed to lh_new().
+
+=head1 SEE ALSO
+
+L<lh_stats(3)|lh_stats(3)>
+
+=head1 HISTORY
+
+The B<lhash> library is available in all versions of SSLeay and OpenSSL.
+lh_error() was added in SSLeay 0.9.1b.
+
+This manpage is derived from the SSLeay documentation.
+
+In OpenSSL 0.9.7, all lhash functions that were passed function pointers
+were changed for better type safety, and the function types LHASH_COMP_FN_TYPE,
+LHASH_HASH_FN_TYPE, LHASH_DOALL_FN_TYPE and LHASH_DOALL_ARG_FN_TYPE 
+became available.
+
+=cut