aboutsummaryrefslogtreecommitdiff
path: root/openssl/doc/ssl/SSL_read.pod
diff options
context:
space:
mode:
authormarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
committermarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
commit3562e78743202e43aec8727005182a2558117eca (patch)
tree8f9113a77d12470c5c851a2a8e4cb02e89df7d43 /openssl/doc/ssl/SSL_read.pod
downloadvcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.gz
vcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.bz2
vcxsrv-3562e78743202e43aec8727005182a2558117eca.zip
Checked in the following released items:
xkeyboard-config-1.4.tar.gz ttf-bitstream-vera-1.10.tar.gz font-alias-1.0.1.tar.gz font-sun-misc-1.0.0.tar.gz font-sun-misc-1.0.0.tar.gz font-sony-misc-1.0.0.tar.gz font-schumacher-misc-1.0.0.tar.gz font-mutt-misc-1.0.0.tar.gz font-misc-misc-1.0.0.tar.gz font-misc-meltho-1.0.0.tar.gz font-micro-misc-1.0.0.tar.gz font-jis-misc-1.0.0.tar.gz font-isas-misc-1.0.0.tar.gz font-dec-misc-1.0.0.tar.gz font-daewoo-misc-1.0.0.tar.gz font-cursor-misc-1.0.0.tar.gz font-arabic-misc-1.0.0.tar.gz font-winitzki-cyrillic-1.0.0.tar.gz font-misc-cyrillic-1.0.0.tar.gz font-cronyx-cyrillic-1.0.0.tar.gz font-screen-cyrillic-1.0.1.tar.gz font-xfree86-type1-1.0.1.tar.gz font-adobe-utopia-type1-1.0.1.tar.gz font-ibm-type1-1.0.0.tar.gz font-bitstream-type1-1.0.0.tar.gz font-bitstream-speedo-1.0.0.tar.gz font-bh-ttf-1.0.0.tar.gz font-bh-type1-1.0.0.tar.gz font-bitstream-100dpi-1.0.0.tar.gz font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz font-bh-100dpi-1.0.0.tar.gz font-adobe-utopia-100dpi-1.0.1.tar.gz font-adobe-100dpi-1.0.0.tar.gz font-util-1.0.1.tar.gz font-bitstream-75dpi-1.0.0.tar.gz font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz font-adobe-utopia-75dpi-1.0.1.tar.gz font-bh-75dpi-1.0.0.tar.gz bdftopcf-1.0.1.tar.gz font-adobe-75dpi-1.0.0.tar.gz mkfontscale-1.0.6.tar.gz openssl-0.9.8k.tar.gz bigreqsproto-1.0.2.tar.gz xtrans-1.2.2.tar.gz resourceproto-1.0.2.tar.gz inputproto-1.4.4.tar.gz compositeproto-0.4.tar.gz damageproto-1.1.0.tar.gz zlib-1.2.3.tar.gz xkbcomp-1.0.5.tar.gz freetype-2.3.9.tar.gz pthreads-w32-2-8-0-release.tar.gz pixman-0.12.0.tar.gz kbproto-1.0.3.tar.gz evieext-1.0.2.tar.gz fixesproto-4.0.tar.gz recordproto-1.13.2.tar.gz randrproto-1.2.2.tar.gz scrnsaverproto-1.1.0.tar.gz renderproto-0.9.3.tar.gz xcmiscproto-1.1.2.tar.gz fontsproto-2.0.2.tar.gz xextproto-7.0.3.tar.gz xproto-7.0.14.tar.gz libXdmcp-1.0.2.tar.gz libxkbfile-1.0.5.tar.gz libfontenc-1.0.4.tar.gz libXfont-1.3.4.tar.gz libX11-1.1.5.tar.gz libXau-1.0.4.tar.gz libxcb-1.1.tar.gz xorg-server-1.5.3.tar.gz
Diffstat (limited to 'openssl/doc/ssl/SSL_read.pod')
-rw-r--r--openssl/doc/ssl/SSL_read.pod124
1 files changed, 124 insertions, 0 deletions
diff --git a/openssl/doc/ssl/SSL_read.pod b/openssl/doc/ssl/SSL_read.pod
new file mode 100644
index 000000000..7038cd2d7
--- /dev/null
+++ b/openssl/doc/ssl/SSL_read.pod
@@ -0,0 +1,124 @@
+=pod
+
+=head1 NAME
+
+SSL_read - read bytes from a TLS/SSL connection.
+
+=head1 SYNOPSIS
+
+ #include <openssl/ssl.h>
+
+ int SSL_read(SSL *ssl, void *buf, int num);
+
+=head1 DESCRIPTION
+
+SSL_read() tries to read B<num> bytes from the specified B<ssl> into the
+buffer B<buf>.
+
+=head1 NOTES
+
+If necessary, SSL_read() will negotiate a TLS/SSL session, if
+not already explicitly performed by L<SSL_connect(3)|SSL_connect(3)> or
+L<SSL_accept(3)|SSL_accept(3)>. If the
+peer requests a re-negotiation, it will be performed transparently during
+the SSL_read() operation. The behaviour of SSL_read() depends on the
+underlying BIO.
+
+For the transparent negotiation to succeed, the B<ssl> must have been
+initialized to client or server mode. This is being done by calling
+L<SSL_set_connect_state(3)|SSL_set_connect_state(3)> or SSL_set_accept_state()
+before the first call to an SSL_read() or L<SSL_write(3)|SSL_write(3)>
+function.
+
+SSL_read() works based on the SSL/TLS records. The data are received in
+records (with a maximum record size of 16kB for SSLv3/TLSv1). Only when a
+record has been completely received, it can be processed (decryption and
+check of integrity). Therefore data that was not retrieved at the last
+call of SSL_read() can still be buffered inside the SSL layer and will be
+retrieved on the next call to SSL_read(). If B<num> is higher than the
+number of bytes buffered, SSL_read() will return with the bytes buffered.
+If no more bytes are in the buffer, SSL_read() will trigger the processing
+of the next record. Only when the record has been received and processed
+completely, SSL_read() will return reporting success. At most the contents
+of the record will be returned. As the size of an SSL/TLS record may exceed
+the maximum packet size of the underlying transport (e.g. TCP), it may
+be necessary to read several packets from the transport layer before the
+record is complete and SSL_read() can succeed.
+
+If the underlying BIO is B<blocking>, SSL_read() will only return, once the
+read operation has been finished or an error occurred, except when a
+renegotiation take place, in which case a SSL_ERROR_WANT_READ may occur.
+This behaviour can be controlled with the SSL_MODE_AUTO_RETRY flag of the
+L<SSL_CTX_set_mode(3)|SSL_CTX_set_mode(3)> call.
+
+If the underlying BIO is B<non-blocking>, SSL_read() will also return
+when the underlying BIO could not satisfy the needs of SSL_read()
+to continue the operation. In this case a call to
+L<SSL_get_error(3)|SSL_get_error(3)> with the
+return value of SSL_read() will yield B<SSL_ERROR_WANT_READ> or
+B<SSL_ERROR_WANT_WRITE>. As at any time a re-negotiation is possible, a
+call to SSL_read() can also cause write operations! The calling process
+then must repeat the call after taking appropriate action to satisfy the
+needs of SSL_read(). The action depends on the underlying BIO. When using a
+non-blocking socket, nothing is to be done, but select() can be used to check
+for the required condition. When using a buffering BIO, like a BIO pair, data
+must be written into or retrieved out of the BIO before being able to continue.
+
+L<SSL_pending(3)|SSL_pending(3)> can be used to find out whether there
+are buffered bytes available for immediate retrieval. In this case
+SSL_read() can be called without blocking or actually receiving new
+data from the underlying socket.
+
+=head1 WARNING
+
+When an SSL_read() operation has to be repeated because of
+B<SSL_ERROR_WANT_READ> or B<SSL_ERROR_WANT_WRITE>, it must be repeated
+with the same arguments.
+
+=head1 RETURN VALUES
+
+The following return values can occur:
+
+=over 4
+
+=item E<gt>0
+
+The read operation was successful; the return value is the number of
+bytes actually read from the TLS/SSL connection.
+
+=item 0
+
+The read operation was not successful. The reason may either be a clean
+shutdown due to a "close notify" alert sent by the peer (in which case
+the SSL_RECEIVED_SHUTDOWN flag in the ssl shutdown state is set
+(see L<SSL_shutdown(3)|SSL_shutdown(3)>,
+L<SSL_set_shutdown(3)|SSL_set_shutdown(3)>). It is also possible, that
+the peer simply shut down the underlying transport and the shutdown is
+incomplete. Call SSL_get_error() with the return value B<ret> to find out,
+whether an error occurred or the connection was shut down cleanly
+(SSL_ERROR_ZERO_RETURN).
+
+SSLv2 (deprecated) does not support a shutdown alert protocol, so it can
+only be detected, whether the underlying connection was closed. It cannot
+be checked, whether the closure was initiated by the peer or by something
+else.
+
+=item E<lt>0
+
+The read operation was not successful, because either an error occurred
+or action must be taken by the calling process. Call SSL_get_error() with the
+return value B<ret> to find out the reason.
+
+=back
+
+=head1 SEE ALSO
+
+L<SSL_get_error(3)|SSL_get_error(3)>, L<SSL_write(3)|SSL_write(3)>,
+L<SSL_CTX_set_mode(3)|SSL_CTX_set_mode(3)>, L<SSL_CTX_new(3)|SSL_CTX_new(3)>,
+L<SSL_connect(3)|SSL_connect(3)>, L<SSL_accept(3)|SSL_accept(3)>
+L<SSL_set_connect_state(3)|SSL_set_connect_state(3)>,
+L<SSL_pending(3)|SSL_pending(3)>,
+L<SSL_shutdown(3)|SSL_shutdown(3)>, L<SSL_set_shutdown(3)|SSL_set_shutdown(3)>,
+L<ssl(3)|ssl(3)>, L<bio(3)|bio(3)>
+
+=cut