Synchronised line endinge with release branch

1 files changed, 1021 insertions, 1021 deletions

diff --git a/openssl/engines/makeengines.com b/openssl/engines/makeengines.com
index a7e4aa86d..0d3174257 100644
--- a/openssl/engines/makeengines.com
+++ b/openssl/engines/makeengines.com
@@ -1,1021 +1,1021 @@
-$!

-$!  MAKEENGINES.COM

-$!  Written By:  Richard Levitte

-$!               richard@levitte.org

-$!

-$!  This command file compiles and creates the various engines in form

-$!  of shared images.  They are placed in [.xxx.EXE.ENGINES], where "xxx"

-$!  is ALPHA, IA64 or VAX, depending on your hardware.

-$!

-$!  P1	if this is ENGINES or ALL, the engines will build, otherwise not.

-$!

-$!  P2	DEBUG or NODEBUG to compile with or without debugger information.

-$!

-$!  P3  VAXC		for VAX C

-$!	DECC		for DEC C

-$!	GNUC		for GNU C (untested)

-$!

-$!  P4	if defined, sets the TCP/IP libraries to use.  UCX or TCPIP is

-$!	used by default since most other implementations come with a

-$!	compatibility library.  The value must be one of the following:

-$!

-$!	UCX		for UCX

-$!	SOCKETSHR	for SOCKETSHR+NETLIB

-$!	TCPIP		for TCPIP (post UCX)

-$!

-$!  P5	if defined, tells the compiler not to use special threads.

-$!

-$!  P6	if defined, denotes which engines to build.  If not defined,

-$!	all available engines are built.

-$!

-$!  For 64 bit architectures (Alpha and IA64), specify the pointer size as P7.

-$!  For 32 bit architectures (VAX), P7 is ignored.

-$!  Currently supported values are:

-$!

-$!	32	To ge a library compiled with /POINTER_SIZE=32

-$!	64	To ge a library compiled with /POINTER_SIZE=64

-$!

-$!-----------------------------------------------------------------------------

-$!

-$! Set the default TCP/IP library to link against if needed

-$!

-$ TCPIP_LIB = ""

-$!

-$! Check What Architecture We Are Using.

-$!

-$ IF (F$GETSYI("CPU").LT.128)

-$ THEN

-$!

-$!  The Architecture Is VAX.

-$!

-$   ARCH = "VAX"

-$!

-$! Else...

-$!

-$ ELSE

-$!

-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.

-$!

-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")

-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"

-$!

-$! End The Architecture Check.

-$!

-$ ENDIF

-$!

-$! Set the names of the engines we want to build

-$! NOTE: Some might think this list ugly.  However, it's made this way to

-$! reflect the LIBNAMES variable in Makefile as closely as possible,

-$! thereby making it fairly easy to verify that the lists are the same.

-$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another

-$! library that isn't necessarely ported to VMS.

-$!

-$ ENGINES = "," + P6

-$ IF ENGINES .EQS. "," THEN -

-	ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,"

-$!

-$! GOST requires a 64-bit integer type, unavailable on VAX.

-$!

-$ IF (ARCH .NES. "VAX") THEN -

-       ENGINES = ENGINES+ ",ccgost"

-$!

-$! Set the goal directories, and create them if necessary

-$!

-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.ENGINES]

-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.ENGINES]

-$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'

-$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'

-$!

-$! Set the goal files, and create them if necessary

-$!

-$ CRYPTO_LIB :=SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB

-$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'

-$!

-$! OK, time to check options and initialise

-$!

-$ OPT_PHASE = P1

-$ ACCEPT_PHASE = "ALL,ENGINES"

-$ OPT_DEBUG = P2

-$ OPT_COMPILER = P3

-$ OPT_TCPIP_LIB = P4

-$ OPT_SPECIAL_THREADS = P5

-$ OPT_POINTER_SIZE = P7

-$

-$ GOSUB CHECK_OPTIONS

-$ GOSUB INITIALISE

-$ GOSUB CHECK_OPT_FILE

-$!

-$! Define what goes into each engine.  VAX includes a transfer vector.

-$!

-$ ENGINE_ = ""

-$ TV_OBJ = ""

-$ IF ARCH .EQS. "VAX"

-$ THEN

-$   ENGINE_ = "engine_vector.mar"

-$   TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"

-$   TV_OBJ = ",''TV_OBJ_NAME'"

-$ ENDIF

-$ ENGINE_4758CCA = "e_4758cca"

-$ ENGINE_aep = "e_aep"

-$ ENGINE_atalla = "e_atalla"

-$ ENGINE_cswift = "e_cswift"

-$ ENGINE_chil = "e_chil"

-$ ENGINE_nuron = "e_nuron"

-$ ENGINE_sureware = "e_sureware"

-$ ENGINE_ubsec = "e_ubsec"

-$ ENGINE_padlock = "e_padlock"

-$

-$ ENGINE_ccgost_SUBDIR = "ccgost"

-$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -

-		  "gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -

-		  "gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -

-		  "gost_sign"

-$!

-$! Define which programs need to be linked with a TCP/IP library

-$!

-$ TCPIP_ENGINES = ",,"

-$ IF COMPILER .EQS. "VAXC" THEN -

-     TCPIP_ENGINES = ",,"

-$!

-$! Set up two loops, one that keeps track of the engines,

-$! and one that keeps track of all the files going into

-$! the current engine.

-$!

-$! Here's the start of the engine loop.

-$!

-$ ENGINE_COUNTER = 0

-$ ENGINE_NEXT:

-$!

-$! Extract the current engine name, and if we've reached the end, stop

-$!

-$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)

-$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE

-$!

-$ ENGINE_COUNTER = ENGINE_COUNTER + 1

-$!

-$! Set up the engine library names.

-$!

-$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME

-$!

-$! Check if the library module name actually is defined

-$!

-$ IF F$TYPE('LIB_ENGINE') .EQS. ""

-$ THEN

-$   WRITE SYS$ERROR ""

-$   WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist.  Continuing..."

-$   WRITE SYS$ERROR ""

-$   GOTO ENGINE_NEXT

-$ ENDIF

-$!

-$! Talk to the user

-$!

-$ IF ENGINE_NAME .NES. ""

-$ THEN

-$   WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"

-$ ELSE

-$   WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"

-$ ENDIF

-$!

-$! Create a .OPT file for the object files (for a real engine name).

-$!

-$ IF ENGINE_NAME .NES. ""

-$ THEN

-$   OPEN/WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT

-$ ENDIF

-$!

-$! Here's the start of per-engine module loop.

-$!

-$ FILE_COUNTER = 0

-$ FILE_NEXT:

-$!

-$! Extract the file name from the file list, and if we've reached the end, stop

-$!

-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')

-$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE

-$!

-$ FILE_COUNTER = FILE_COUNTER + 1

-$!

-$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT

-$!

-$! Set up the source and object reference

-$!

-$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""

-$ THEN

-$     SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")

-$ ELSE

-$     SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")

-$ ENDIF

-$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"

-$!

-$! If we get some problem, we just go on trying to build the next module.

-$ ON WARNING THEN GOTO FILE_NEXT

-$!

-$! Check if the module we want to compile is actually there.

-$!

-$ IF F$SEARCH(SOURCE_FILE) .EQS. ""

-$ THEN

-$   WRITE SYS$OUTPUT ""

-$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."

-$   WRITE SYS$OUTPUT ""

-$   GOTO EXIT

-$ ENDIF

-$!

-$! Talk to the user.

-$!

-$ WRITE SYS$OUTPUT "	",FILE_NAME,""

-$!

-$! Do the dirty work.

-$!

-$ ON ERROR THEN GOTO FILE_NEXT

-$ IF F$EDIT(F$PARSE(SOURCE_FILE,,,"TYPE","SYNTAX_ONLY"),"UPCASE") .EQS. ".MAR"

-$ THEN

-$   MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'

-$ ELSE

-$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'

-$ ENDIF

-$!

-$! Write the entry to the .OPT file (for a real engine name).

-$!

-$ IF ENGINE_NAME .NES. ""

-$ THEN

-$   WRITE OBJECTS OBJECT_FILE

-$ ENDIF

-$!

-$! Next file

-$!

-$ GOTO FILE_NEXT

-$!

-$ FILE_DONE:

-$!

-$! Do not link the support files.

-$!

-$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT

-$!

-$! Close the linker options file (for a real engine name).

-$!

-$ CLOSE OBJECTS

-$!

-$! Now, there are two ways to handle this.  We can either build 

-$! shareable images or stick the engine object file into libcrypto.

-$! For now, the latter is NOT supported.

-$!

-$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'

-$!

-$! For shareable libraries, we need to do things a little differently

-$! depending on if we link with a TCP/IP library or not.

-$!

-$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT

-$ IF TCPIP_LIB .NES. ""

-$ THEN

-$   LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -

-	'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -

-	'CRYPTO_LIB'/LIBRARY, -

-	'ENGINE_OPT'/OPTION,'TCPIP_LIB','OPT_FILE'/OPTION

-$ ELSE

-$   LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -

-	'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -

-        'CRYPTO_LIB'/LIBRARY, -

-	'ENGINE_OPT'/OPTION,'OPT_FILE'/OPTION

-$ ENDIF

-$!

-$! Next engine

-$!

-$ GOTO ENGINE_NEXT

-$!

-$ ENGINE_DONE:

-$!

-$! Talk to the user

-$!

-$ WRITE SYS$OUTPUT "All Done..."

-$ EXIT:

-$ GOSUB CLEANUP

-$ EXIT

-$!

-$! Check For The Link Option FIle.

-$!

-$ CHECK_OPT_FILE:

-$!

-$! Check To See If We Need To Make A VAX C Option File.

-$!

-$ IF (COMPILER.EQS."VAXC")

-$ THEN

-$!

-$!  Check To See If We Already Have A VAX C Linker Option File.

-$!

-$   IF (F$SEARCH(OPT_FILE).EQS."")

-$   THEN

-$!

-$!    We Need A VAX C Linker Option File.

-$!

-$     CREATE 'OPT_FILE'

-$DECK

-!

-! Default System Options File To Link Agianst 

-! The Sharable VAX C Runtime Library.

-!

-SYS$SHARE:VAXCRTL.EXE/SHARE

-$EOD

-$!

-$!  End The Option File Check.

-$!

-$   ENDIF

-$!

-$! End The VAXC Check.

-$!

-$ ENDIF

-$!

-$! Check To See If We Need A GNU C Option File.

-$!

-$ IF (COMPILER.EQS."GNUC")

-$ THEN

-$!

-$!  Check To See If We Already Have A GNU C Linker Option File.

-$!

-$   IF (F$SEARCH(OPT_FILE).EQS."")

-$   THEN

-$!

-$!    We Need A GNU C Linker Option File.

-$!

-$     CREATE 'OPT_FILE'

-$DECK

-!

-! Default System Options File To Link Agianst 

-! The Sharable C Runtime Library.

-!

-GNU_CC:[000000]GCCLIB/LIBRARY

-SYS$SHARE:VAXCRTL/SHARE

-$EOD

-$!

-$!  End The Option File Check.

-$!

-$   ENDIF

-$!

-$! End The GNU C Check.

-$!

-$ ENDIF

-$!

-$! Check To See If We Need A DEC C Option File.

-$!

-$ IF (COMPILER.EQS."DECC")

-$ THEN

-$!

-$!  Check To See If We Already Have A DEC C Linker Option File.

-$!

-$   IF (F$SEARCH(OPT_FILE).EQS."")

-$   THEN

-$!

-$!    Figure Out If We Need A non-VAX Or A VAX Linker Option File.

-$!

-$     IF ARCH .EQS. "VAX"

-$     THEN

-$!

-$!      We Need A DEC C Linker Option File For VAX.

-$!

-$       CREATE 'OPT_FILE'

-$DECK

-!

-! Default System Options File To Link Agianst 

-! The Sharable DEC C Runtime Library.

-!

-SYS$SHARE:DECC$SHR.EXE/SHARE

-$EOD

-$!

-$!    Else...

-$!

-$     ELSE

-$!

-$!      Create The non-VAX Linker Option File.

-$!

-$       CREATE 'OPT_FILE'

-$DECK

-!

-! Default System Options File For non-VAX To Link Agianst 

-! The Sharable C Runtime Library.

-!

-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE

-SYS$SHARE:CMA$OPEN_RTL/SHARE

-$EOD

-$!

-$!    End The DEC C Option File Check.

-$!

-$     ENDIF

-$!

-$!  End The Option File Search.

-$!

-$   ENDIF

-$!

-$! End The DEC C Check.

-$!

-$ ENDIF

-$!

-$!  Tell The User What Linker Option File We Are Using.

-$!

-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."	

-$!

-$! Time To RETURN.

-$!

-$ RETURN

-$!

-$! Check The User's Options.

-$!

-$ CHECK_OPTIONS:

-$!

-$! Check To See If OPT_PHASE Is Blank.

-$!

-$ IF (OPT_PHASE.EQS."ALL")

-$ THEN

-$!

-$!   OPT_PHASE Is Blank, So Build Everything.

-$!

-$    BUILDALL = "ALL"

-$!

-$! Else...

-$!

-$ ELSE

-$!

-$!  Else, Check To See If OPT_PHASE Has A Valid Argument.

-$!

-$   IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -

-       .NES. ("," + ACCEPT_PHASE + ",")

-$   THEN

-$!

-$!    A Valid Argument.

-$!

-$     BUILDALL = OPT_PHASE

-$!

-$!  Else...

-$!

-$   ELSE

-$!

-$!    Tell The User We Don't Know What They Want.

-$!

-$     WRITE SYS$OUTPUT ""

-$     WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid.  The valid options are:"

-$     WRITE SYS$OUTPUT ""

-$     IF ("," + ACCEPT_PHASE + ",") - ",ALL," -

-	.NES. ("," + ACCEPT_PHASE + ",") THEN -

-	WRITE SYS$OUTPUT "    ALL      :  just build everything."

-$     IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -

-	.NES. ("," + ACCEPT_PHASE + ",") THEN -

-	WRITE SYS$OUTPUT "    ENGINES  :  to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."

-$     WRITE SYS$OUTPUT ""

-$     WRITE SYS$OUTPUT " where 'xxx' stands for:"

-$     WRITE SYS$OUTPUT ""

-$     WRITE SYS$OUTPUT "    ALPHA    :  Alpha architecture."

-$     WRITE SYS$OUTPUT "    IA64     :  IA64 architecture."

-$     WRITE SYS$OUTPUT "    VAX      :  VAX architecture."

-$     WRITE SYS$OUTPUT ""

-$!

-$!    Time To EXIT.

-$!

-$     EXIT

-$!

-$!  End The Valid Argument Check.

-$!

-$   ENDIF

-$!

-$! End The OPT_PHASE Check.

-$!

-$ ENDIF

-$!

-$! Check To See If OPT_DEBUG Is Blank.

-$!

-$ IF (OPT_DEBUG.EQS."NODEBUG")

-$ THEN

-$!

-$!   OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.

-$!

-$    DEBUGGER = "NODEBUG"

-$    TRACEBACK = "NOTRACEBACK" 

-$    GCC_OPTIMIZE = "OPTIMIZE"

-$    CC_OPTIMIZE = "OPTIMIZE"

-$    MACRO_OPTIMIZE = "OPTIMIZE"

-$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."

-$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."

-$ ELSE

-$!

-$!  Check To See If We Are To Compile With Debugger Information.

-$!

-$   IF (OPT_DEBUG.EQS."DEBUG")

-$   THEN

-$!

-$!    Compile With Debugger Information.

-$!

-$     DEBUGGER = "DEBUG"

-$     TRACEBACK = "TRACEBACK"

-$     GCC_OPTIMIZE = "NOOPTIMIZE"

-$     CC_OPTIMIZE = "NOOPTIMIZE"

-$     MACRO_OPTIMIZE = "NOOPTIMIZE"

-$     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."

-$     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."

-$   ELSE 

-$!

-$!    They Entered An Invalid Option..

-$!

-$     WRITE SYS$OUTPUT ""

-$     WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid.  The Valid Options Are:"

-$     WRITE SYS$OUTPUT ""

-$     WRITE SYS$OUTPUT "     DEBUG   :  Compile With The Debugger Information."

-$     WRITE SYS$OUTPUT "     NODEBUG :  Compile Without The Debugger Information."

-$     WRITE SYS$OUTPUT ""

-$!

-$!    Time To EXIT.

-$!

-$     EXIT

-$!

-$!  End The Valid Argument Check.

-$!

-$   ENDIF

-$!

-$! End The OPT_DEBUG Check.

-$!

-$ ENDIF

-$!

-$! Special Threads For OpenVMS v7.1 Or Later

-$!

-$! Written By:  Richard Levitte

-$!              richard@levitte.org

-$!

-$!

-$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.

-$!

-$ IF (OPT_SPECIAL_THREADS.EQS."")

-$ THEN

-$!

-$!  Get The Version Of VMS We Are Using.

-$!

-$   ISSEVEN :=

-$   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))

-$   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))

-$!

-$!  Check To See If The VMS Version Is v7.1 Or Later.

-$!

-$   IF (TMP.GE.71)

-$   THEN

-$!

-$!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.

-$!

-$     ISSEVEN := ,PTHREAD_USE_D4

-$!

-$!  End The VMS Version Check.

-$!

-$   ENDIF

-$!

-$! End The OPT_SPECIAL_THREADS Check.

-$!

-$ ENDIF

-$!

-$! Check To See If OPT_POINTER_SIZE Is Blank.

-$!

-$ IF (OPT_POINTER_SIZE.EQS."")

-$ THEN

-$   POINTER_SIZE = ""

-$ ELSE

-$!

-$!  Check is OPT_POINTER_SIZE Is Valid

-$!

-$   IF (OPT_POINTER_SIZE.EQS."32")

-$   THEN

-$     POINTER_SIZE = "/POINTER_SIZE=32"

-$     IF ARCH .EQS. "VAX"

-$     THEN

-$       LIB32 = ""

-$     ELSE

-$       LIB32 = "32"

-$     ENDIF

-$   ELSE

-$     IF (OPT_POINTER_SIZE.EQS."64")

-$     THEN

-$       LIB32 = ""

-$       IF ARCH .EQS. "VAX"

-$       THEN

-$         POINTER_SIZE = "/POINTER_SIZE=32"

-$       ELSE

-$         POINTER_SIZE = "/POINTER_SIZE=64"

-$       ENDIF

-$     ELSE

-$!

-$!      Tell The User Entered An Invalid Option..

-$!

-$       WRITE SYS$OUTPUT ""

-$       WRITE SYS$OUTPUT "The Option ",OPT_POINTER_SIZE," Is Invalid.  The Valid Options Are:"

-$       WRITE SYS$OUTPUT ""

-$       WRITE SYS$OUTPUT "    32  :  Compile with 32 bit pointer size"

-$       WRITE SYS$OUTPUT "    64  :  Compile with 64 bit pointer size"

-$       WRITE SYS$OUTPUT ""

-$!

-$!      Time To EXIT.

-$!

-$       GOTO TIDY

-$!

-$!      End The Valid Arguement Check.

-$!

-$     ENDIF

-$   ENDIF

-$!

-$! End The OPT_POINTER_SIZE Check.

-$!

-$ ENDIF

-$!

-$! Check To See If OPT_COMPILER Is Blank.

-$!

-$ IF (OPT_COMPILER.EQS."")

-$ THEN

-$!

-$!  O.K., The User Didn't Specify A Compiler, Let's Try To

-$!  Find Out Which One To Use.

-$!

-$!  Check To See If We Have GNU C.

-$!

-$   IF (F$TRNLNM("GNU_CC").NES."")

-$   THEN

-$!

-$!    Looks Like GNUC, Set To Use GNUC.

-$!

-$     OPT_COMPILER = "GNUC"

-$!

-$!  Else...

-$!

-$   ELSE

-$!

-$!    Check To See If We Have VAXC Or DECC.

-$!

-$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")

-$     THEN 

-$!

-$!      Looks Like DECC, Set To Use DECC.

-$!

-$       OPT_COMPILER = "DECC"

-$!

-$!    Else...

-$!

-$     ELSE

-$!

-$!      Looks Like VAXC, Set To Use VAXC.

-$!

-$       OPT_COMPILER = "VAXC"

-$!

-$!    End The VAXC Compiler Check.

-$!

-$     ENDIF

-$!

-$!  End The DECC & VAXC Compiler Check.

-$!

-$   ENDIF

-$!

-$!  End The Compiler Check.

-$!

-$ ENDIF

-$!

-$! Check To See If We Have A Option For OPT_TCPIP_LIB.

-$!

-$ IF (OPT_TCPIP_LIB.EQS."")

-$ THEN

-$!

-$!  Find out what socket library we have available

-$!

-$   IF F$PARSE("SOCKETSHR:") .NES. ""

-$   THEN

-$!

-$!    We have SOCKETSHR, and it is my opinion that it's the best to use.

-$!

-$     OPT_TCPIP_LIB = "SOCKETSHR"

-$!

-$!    Tell the user

-$!

-$     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"

-$!

-$!    Else, let's look for something else

-$!

-$   ELSE

-$!

-$!    Like UCX (the reason to do this before Multinet is that the UCX

-$!    emulation is easier to use...)

-$!

-$     IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -

-	 .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -

-	 .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""

-$     THEN

-$!

-$!	Last resort: a UCX or UCX-compatible library

-$!

-$	OPT_TCPIP_LIB = "UCX"

-$!

-$!      Tell the user

-$!

-$       WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"

-$!

-$!	That was all...

-$!

-$     ENDIF

-$   ENDIF

-$ ENDIF

-$!

-$! Set Up Initial CC Definitions, Possibly With User Ones

-$!

-$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"

-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS

-$ CCEXTRAFLAGS = ""

-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS

-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"

-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -

-	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS

-$!

-$!  Check To See If The User Entered A Valid Paramter.

-$!

-$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")

-$ THEN

-$!

-$!    Check To See If The User Wanted DECC.

-$!

-$   IF (OPT_COMPILER.EQS."DECC")

-$   THEN

-$!

-$!    Looks Like DECC, Set To Use DECC.

-$!

-$     COMPILER = "DECC"

-$!

-$!    Tell The User We Are Using DECC.

-$!

-$     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."

-$!

-$!    Use DECC...

-$!

-$     CC = "CC"

-$     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -

-	 THEN CC = "CC/DECC"

-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -

-           "/NOLIST/PREFIX=ALL" + -

-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS])" + -

-	   CCEXTRAFLAGS

-$!

-$!    Define The Linker Options File Name.

-$!

-$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"

-$!

-$!  End DECC Check.

-$!

-$   ENDIF

-$!

-$!  Check To See If We Are To Use VAXC.

-$!

-$   IF (OPT_COMPILER.EQS."VAXC")

-$   THEN

-$!

-$!    Looks Like VAXC, Set To Use VAXC.

-$!

-$     COMPILER = "VAXC"

-$!

-$!    Tell The User We Are Using VAX C.

-$!

-$     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."

-$!

-$!    Compile Using VAXC.

-$!

-$     CC = "CC"

-$     IF ARCH.NES."VAX"

-$     THEN

-$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"

-$	EXIT

-$     ENDIF

-$     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"

-$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -

-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -

-	   CCEXTRAFLAGS

-$     CCDEFS = """VAXC""," + CCDEFS

-$!

-$!    Define <sys> As SYS$COMMON:[SYSLIB]

-$!

-$     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]

-$!

-$!    Define The Linker Options File Name.

-$!

-$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"

-$!

-$!  End VAXC Check

-$!

-$   ENDIF

-$!

-$!  Check To See If We Are To Use GNU C.

-$!

-$   IF (OPT_COMPILER.EQS."GNUC")

-$   THEN

-$!

-$!    Looks Like GNUC, Set To Use GNUC.

-$!

-$     COMPILER = "GNUC"

-$!

-$!    Tell The User We Are Using GNUC.

-$!

-$     WRITE SYS$OUTPUT "Using GNU 'C' Compiler."

-$!

-$!    Use GNU C...

-$!

-$     CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -

-	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -

-	   CCEXTRAFLAGS

-$!

-$!    Define The Linker Options File Name.

-$!

-$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"

-$!

-$!  End The GNU C Check.

-$!

-$   ENDIF

-$!

-$!  Set up default defines

-$!

-$   CCDEFS = """FLAT_INC=1""," + CCDEFS

-$!

-$!  Finish up the definition of CC.

-$!

-$   IF COMPILER .EQS. "DECC"

-$   THEN

-$     IF CCDISABLEWARNINGS .NES. ""

-$     THEN

-$       CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"

-$     ENDIF

-$   ELSE

-$     CCDISABLEWARNINGS = ""

-$   ENDIF

-$   CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS

-$!

-$!  Show user the result

-$!

-$   WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC

-$!

-$!  Else The User Entered An Invalid Argument.

-$!

-$ ELSE

-$!

-$!  Tell The User We Don't Know What They Want.

-$!

-$   WRITE SYS$OUTPUT ""

-$   WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid.  The Valid Options Are:"

-$   WRITE SYS$OUTPUT ""

-$   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."

-$   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."

-$   WRITE SYS$OUTPUT "    GNUC  :  To Compile With GNU C."

-$   WRITE SYS$OUTPUT ""

-$!

-$!  Time To EXIT.

-$!

-$   EXIT

-$!

-$! End The Valid Argument Check.

-$!

-$ ENDIF

-$!

-$! Build a MACRO command for the architecture at hand

-$!

-$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"

-$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"

-$!

-$!  Show user the result

-$!

-$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO

-$!

-$! Time to check the contents, and to make sure we get the correct library.

-$!

-$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -

-     .OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -

-     .OR. OPT_TCPIP_LIB.EQS."NONE"

-$ THEN

-$!

-$!  Check to see if SOCKETSHR was chosen

-$!

-$   IF OPT_TCPIP_LIB.EQS."SOCKETSHR"

-$   THEN

-$!

-$!    Set the library to use SOCKETSHR

-$!

-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"

-$!

-$!    Done with SOCKETSHR

-$!

-$   ENDIF

-$!

-$!  Check to see if MULTINET was chosen

-$!

-$   IF OPT_TCPIP_LIB.EQS."MULTINET"

-$   THEN

-$!

-$!    Set the library to use UCX emulation.

-$!

-$     OPT_TCPIP_LIB = "UCX"

-$!

-$!    Done with MULTINET

-$!

-$   ENDIF

-$!

-$!  Check to see if UCX was chosen

-$!

-$   IF OPT_TCPIP_LIB.EQS."UCX"

-$   THEN

-$!

-$!    Set the library to use UCX.

-$!

-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"

-$     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""

-$     THEN

-$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"

-$     ELSE

-$       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -

-	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"

-$     ENDIF

-$!

-$!    Done with UCX

-$!

-$   ENDIF

-$!

-$!  Check to see if TCPIP was chosen

-$!

-$   IF OPT_TCPIP_LIB.EQS."TCPIP"

-$   THEN

-$!

-$!    Set the library to use TCPIP (post UCX).

-$!

-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"

-$!

-$!    Done with TCPIP

-$!

-$   ENDIF

-$!

-$!  Check to see if NONE was chosen

-$!

-$   IF OPT_TCPIP_LIB.EQS."NONE"

-$   THEN

-$!

-$!    Do not use a TCPIP library.

-$!

-$     TCPIP_LIB = ""

-$!

-$!    Done with TCPIP

-$!

-$   ENDIF

-$!

-$!  Print info

-$!

-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB

-$!

-$!  Else The User Entered An Invalid Argument.

-$!

-$ ELSE

-$!

-$!  Tell The User We Don't Know What They Want.

-$!

-$   WRITE SYS$OUTPUT ""

-$   WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid.  The Valid Options Are:"

-$   WRITE SYS$OUTPUT ""

-$   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."

-$   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."

-$   WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP (post UCX) TCP/IP library."

-$   WRITE SYS$OUTPUT ""

-$!

-$!  Time To EXIT.

-$!

-$   EXIT

-$!

-$!  Done with TCP/IP libraries

-$!

-$ ENDIF

-$!

-$!  Time To RETURN...

-$!

-$ RETURN

-$!

-$ INITIALISE:

-$!

-$! Save old value of the logical name OPENSSL

-$!

-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")

-$!

-$! Save directory information

-$!

-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"

-$ __HERE = F$EDIT(__HERE,"UPCASE")

-$ __TOP = __HERE - "ENGINES]"

-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"

-$!

-$! Set up the logical name OPENSSL to point at the include directory

-$!

-$ DEFINE OPENSSL/NOLOG '__INCLUDE'

-$!

-$! Done

-$!

-$ RETURN

-$!

-$ CLEANUP:

-$!

-$! Restore the logical name OPENSSL if it had a value

-$!

-$ IF __SAVE_OPENSSL .EQS. ""

-$ THEN

-$   DEASSIGN OPENSSL

-$ ELSE

-$   DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'

-$ ENDIF

-$!

-$! Done

-$!

-$ RETURN

+$!
+$!  MAKEENGINES.COM
+$!  Written By:  Richard Levitte
+$!               richard@levitte.org
+$!
+$!  This command file compiles and creates the various engines in form
+$!  of shared images.  They are placed in [.xxx.EXE.ENGINES], where "xxx"
+$!  is ALPHA, IA64 or VAX, depending on your hardware.
+$!
+$!  P1	if this is ENGINES or ALL, the engines will build, otherwise not.
+$!
+$!  P2	DEBUG or NODEBUG to compile with or without debugger information.
+$!
+$!  P3  VAXC		for VAX C
+$!	DECC		for DEC C
+$!	GNUC		for GNU C (untested)
+$!
+$!  P4	if defined, sets the TCP/IP libraries to use.  UCX or TCPIP is
+$!	used by default since most other implementations come with a
+$!	compatibility library.  The value must be one of the following:
+$!
+$!	UCX		for UCX
+$!	SOCKETSHR	for SOCKETSHR+NETLIB
+$!	TCPIP		for TCPIP (post UCX)
+$!
+$!  P5	if defined, tells the compiler not to use special threads.
+$!
+$!  P6	if defined, denotes which engines to build.  If not defined,
+$!	all available engines are built.
+$!
+$!  For 64 bit architectures (Alpha and IA64), specify the pointer size as P7.
+$!  For 32 bit architectures (VAX), P7 is ignored.
+$!  Currently supported values are:
+$!
+$!	32	To ge a library compiled with /POINTER_SIZE=32
+$!	64	To ge a library compiled with /POINTER_SIZE=64
+$!
+$!-----------------------------------------------------------------------------
+$!
+$! Set the default TCP/IP library to link against if needed
+$!
+$ TCPIP_LIB = ""
+$!
+$! Check What Architecture We Are Using.
+$!
+$ IF (F$GETSYI("CPU").LT.128)
+$ THEN
+$!
+$!  The Architecture Is VAX.
+$!
+$   ARCH = "VAX"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!
+$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$!
+$! End The Architecture Check.
+$!
+$ ENDIF
+$!
+$! Set the names of the engines we want to build
+$! NOTE: Some might think this list ugly.  However, it's made this way to
+$! reflect the LIBNAMES variable in Makefile as closely as possible,
+$! thereby making it fairly easy to verify that the lists are the same.
+$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another
+$! library that isn't necessarely ported to VMS.
+$!
+$ ENGINES = "," + P6
+$ IF ENGINES .EQS. "," THEN -
+	ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,"
+$!
+$! GOST requires a 64-bit integer type, unavailable on VAX.
+$!
+$ IF (ARCH .NES. "VAX") THEN -
+       ENGINES = ENGINES+ ",ccgost"
+$!
+$! Set the goal directories, and create them if necessary
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.ENGINES]
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.ENGINES]
+$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'
+$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'
+$!
+$! Set the goal files, and create them if necessary
+$!
+$ CRYPTO_LIB :=SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB
+$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'
+$!
+$! OK, time to check options and initialise
+$!
+$ OPT_PHASE = P1
+$ ACCEPT_PHASE = "ALL,ENGINES"
+$ OPT_DEBUG = P2
+$ OPT_COMPILER = P3
+$ OPT_TCPIP_LIB = P4
+$ OPT_SPECIAL_THREADS = P5
+$ OPT_POINTER_SIZE = P7
+$
+$ GOSUB CHECK_OPTIONS
+$ GOSUB INITIALISE
+$ GOSUB CHECK_OPT_FILE
+$!
+$! Define what goes into each engine.  VAX includes a transfer vector.
+$!
+$ ENGINE_ = ""
+$ TV_OBJ = ""
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$   ENGINE_ = "engine_vector.mar"
+$   TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
+$   TV_OBJ = ",''TV_OBJ_NAME'"
+$ ENDIF
+$ ENGINE_4758CCA = "e_4758cca"
+$ ENGINE_aep = "e_aep"
+$ ENGINE_atalla = "e_atalla"
+$ ENGINE_cswift = "e_cswift"
+$ ENGINE_chil = "e_chil"
+$ ENGINE_nuron = "e_nuron"
+$ ENGINE_sureware = "e_sureware"
+$ ENGINE_ubsec = "e_ubsec"
+$ ENGINE_padlock = "e_padlock"
+$
+$ ENGINE_ccgost_SUBDIR = "ccgost"
+$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -
+		  "gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -
+		  "gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -
+		  "gost_sign"
+$!
+$! Define which programs need to be linked with a TCP/IP library
+$!
+$ TCPIP_ENGINES = ",,"
+$ IF COMPILER .EQS. "VAXC" THEN -
+     TCPIP_ENGINES = ",,"
+$!
+$! Set up two loops, one that keeps track of the engines,
+$! and one that keeps track of all the files going into
+$! the current engine.
+$!
+$! Here's the start of the engine loop.
+$!
+$ ENGINE_COUNTER = 0
+$ ENGINE_NEXT:
+$!
+$! Extract the current engine name, and if we've reached the end, stop
+$!
+$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)
+$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE
+$!
+$ ENGINE_COUNTER = ENGINE_COUNTER + 1
+$!
+$! Set up the engine library names.
+$!
+$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME
+$!
+$! Check if the library module name actually is defined
+$!
+$ IF F$TYPE('LIB_ENGINE') .EQS. ""
+$ THEN
+$   WRITE SYS$ERROR ""
+$   WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist.  Continuing..."
+$   WRITE SYS$ERROR ""
+$   GOTO ENGINE_NEXT
+$ ENDIF
+$!
+$! Talk to the user
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$   WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"
+$ ELSE
+$   WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"
+$ ENDIF
+$!
+$! Create a .OPT file for the object files (for a real engine name).
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$   OPEN/WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT
+$ ENDIF
+$!
+$! Here's the start of per-engine module loop.
+$!
+$ FILE_COUNTER = 0
+$ FILE_NEXT:
+$!
+$! Extract the file name from the file list, and if we've reached the end, stop
+$!
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')
+$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
+$!
+$ FILE_COUNTER = FILE_COUNTER + 1
+$!
+$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT
+$!
+$! Set up the source and object reference
+$!
+$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""
+$ THEN
+$     SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")
+$ ELSE
+$     SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")
+$ ENDIF
+$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
+$!
+$! If we get some problem, we just go on trying to build the next module.
+$ ON WARNING THEN GOTO FILE_NEXT
+$!
+$! Check if the module we want to compile is actually there.
+$!
+$ IF F$SEARCH(SOURCE_FILE) .EQS. ""
+$ THEN
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
+$   WRITE SYS$OUTPUT ""
+$   GOTO EXIT
+$ ENDIF
+$!
+$! Talk to the user.
+$!
+$ WRITE SYS$OUTPUT "	",FILE_NAME,""
+$!
+$! Do the dirty work.
+$!
+$ ON ERROR THEN GOTO FILE_NEXT
+$ IF F$EDIT(F$PARSE(SOURCE_FILE,,,"TYPE","SYNTAX_ONLY"),"UPCASE") .EQS. ".MAR"
+$ THEN
+$   MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$   CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
+$!
+$! Write the entry to the .OPT file (for a real engine name).
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$   WRITE OBJECTS OBJECT_FILE
+$ ENDIF
+$!
+$! Next file
+$!
+$ GOTO FILE_NEXT
+$!
+$ FILE_DONE:
+$!
+$! Do not link the support files.
+$!
+$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
+$!
+$! Close the linker options file (for a real engine name).
+$!
+$ CLOSE OBJECTS
+$!
+$! Now, there are two ways to handle this.  We can either build 
+$! shareable images or stick the engine object file into libcrypto.
+$! For now, the latter is NOT supported.
+$!
+$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'
+$!
+$! For shareable libraries, we need to do things a little differently
+$! depending on if we link with a TCP/IP library or not.
+$!
+$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT
+$ IF TCPIP_LIB .NES. ""
+$ THEN
+$   LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
+	'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
+	'CRYPTO_LIB'/LIBRARY, -
+	'ENGINE_OPT'/OPTION,'TCPIP_LIB','OPT_FILE'/OPTION
+$ ELSE
+$   LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
+	'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
+        'CRYPTO_LIB'/LIBRARY, -
+	'ENGINE_OPT'/OPTION,'OPT_FILE'/OPTION
+$ ENDIF
+$!
+$! Next engine
+$!
+$ GOTO ENGINE_NEXT
+$!
+$ ENGINE_DONE:
+$!
+$! Talk to the user
+$!
+$ WRITE SYS$OUTPUT "All Done..."
+$ EXIT:
+$ GOSUB CLEANUP
+$ EXIT
+$!
+$! Check For The Link Option FIle.
+$!
+$ CHECK_OPT_FILE:
+$!
+$! Check To See If We Need To Make A VAX C Option File.
+$!
+$ IF (COMPILER.EQS."VAXC")
+$ THEN
+$!
+$!  Check To See If We Already Have A VAX C Linker Option File.
+$!
+$   IF (F$SEARCH(OPT_FILE).EQS."")
+$   THEN
+$!
+$!    We Need A VAX C Linker Option File.
+$!
+$     CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst 
+! The Sharable VAX C Runtime Library.
+!
+SYS$SHARE:VAXCRTL.EXE/SHARE
+$EOD
+$!
+$!  End The Option File Check.
+$!
+$   ENDIF
+$!
+$! End The VAXC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A GNU C Option File.
+$!
+$ IF (COMPILER.EQS."GNUC")
+$ THEN
+$!
+$!  Check To See If We Already Have A GNU C Linker Option File.
+$!
+$   IF (F$SEARCH(OPT_FILE).EQS."")
+$   THEN
+$!
+$!    We Need A GNU C Linker Option File.
+$!
+$     CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst 
+! The Sharable C Runtime Library.
+!
+GNU_CC:[000000]GCCLIB/LIBRARY
+SYS$SHARE:VAXCRTL/SHARE
+$EOD
+$!
+$!  End The Option File Check.
+$!
+$   ENDIF
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A DEC C Option File.
+$!
+$ IF (COMPILER.EQS."DECC")
+$ THEN
+$!
+$!  Check To See If We Already Have A DEC C Linker Option File.
+$!
+$   IF (F$SEARCH(OPT_FILE).EQS."")
+$   THEN
+$!
+$!    Figure Out If We Need A non-VAX Or A VAX Linker Option File.
+$!
+$     IF ARCH .EQS. "VAX"
+$     THEN
+$!
+$!      We Need A DEC C Linker Option File For VAX.
+$!
+$       CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst 
+! The Sharable DEC C Runtime Library.
+!
+SYS$SHARE:DECC$SHR.EXE/SHARE
+$EOD
+$!
+$!    Else...
+$!
+$     ELSE
+$!
+$!      Create The non-VAX Linker Option File.
+$!
+$       CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File For non-VAX To Link Agianst 
+! The Sharable C Runtime Library.
+!
+SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
+SYS$SHARE:CMA$OPEN_RTL/SHARE
+$EOD
+$!
+$!    End The DEC C Option File Check.
+$!
+$     ENDIF
+$!
+$!  End The Option File Search.
+$!
+$   ENDIF
+$!
+$! End The DEC C Check.
+$!
+$ ENDIF
+$!
+$!  Tell The User What Linker Option File We Are Using.
+$!
+$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."	
+$!
+$! Time To RETURN.
+$!
+$ RETURN
+$!
+$! Check The User's Options.
+$!
+$ CHECK_OPTIONS:
+$!
+$! Check To See If OPT_PHASE Is Blank.
+$!
+$ IF (OPT_PHASE.EQS."ALL")
+$ THEN
+$!
+$!   OPT_PHASE Is Blank, So Build Everything.
+$!
+$    BUILDALL = "ALL"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$!  Else, Check To See If OPT_PHASE Has A Valid Argument.
+$!
+$   IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -
+       .NES. ("," + ACCEPT_PHASE + ",")
+$   THEN
+$!
+$!    A Valid Argument.
+$!
+$     BUILDALL = OPT_PHASE
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Tell The User We Don't Know What They Want.
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid.  The valid options are:"
+$     WRITE SYS$OUTPUT ""
+$     IF ("," + ACCEPT_PHASE + ",") - ",ALL," -
+	.NES. ("," + ACCEPT_PHASE + ",") THEN -
+	WRITE SYS$OUTPUT "    ALL      :  just build everything."
+$     IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -
+	.NES. ("," + ACCEPT_PHASE + ",") THEN -
+	WRITE SYS$OUTPUT "    ENGINES  :  to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT " where 'xxx' stands for:"
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "    ALPHA    :  Alpha architecture."
+$     WRITE SYS$OUTPUT "    IA64     :  IA64 architecture."
+$     WRITE SYS$OUTPUT "    VAX      :  VAX architecture."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Time To EXIT.
+$!
+$     EXIT
+$!
+$!  End The Valid Argument Check.
+$!
+$   ENDIF
+$!
+$! End The OPT_PHASE Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_DEBUG Is Blank.
+$!
+$ IF (OPT_DEBUG.EQS."NODEBUG")
+$ THEN
+$!
+$!   OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.
+$!
+$    DEBUGGER = "NODEBUG"
+$    TRACEBACK = "NOTRACEBACK" 
+$    GCC_OPTIMIZE = "OPTIMIZE"
+$    CC_OPTIMIZE = "OPTIMIZE"
+$    MACRO_OPTIMIZE = "OPTIMIZE"
+$    WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$    WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$ ELSE
+$!
+$!  Check To See If We Are To Compile With Debugger Information.
+$!
+$   IF (OPT_DEBUG.EQS."DEBUG")
+$   THEN
+$!
+$!    Compile With Debugger Information.
+$!
+$     DEBUGGER = "DEBUG"
+$     TRACEBACK = "TRACEBACK"
+$     GCC_OPTIMIZE = "NOOPTIMIZE"
+$     CC_OPTIMIZE = "NOOPTIMIZE"
+$     MACRO_OPTIMIZE = "NOOPTIMIZE"
+$     WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
+$     WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
+$   ELSE 
+$!
+$!    They Entered An Invalid Option..
+$!
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid.  The Valid Options Are:"
+$     WRITE SYS$OUTPUT ""
+$     WRITE SYS$OUTPUT "     DEBUG   :  Compile With The Debugger Information."
+$     WRITE SYS$OUTPUT "     NODEBUG :  Compile Without The Debugger Information."
+$     WRITE SYS$OUTPUT ""
+$!
+$!    Time To EXIT.
+$!
+$     EXIT
+$!
+$!  End The Valid Argument Check.
+$!
+$   ENDIF
+$!
+$! End The OPT_DEBUG Check.
+$!
+$ ENDIF
+$!
+$! Special Threads For OpenVMS v7.1 Or Later
+$!
+$! Written By:  Richard Levitte
+$!              richard@levitte.org
+$!
+$!
+$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.
+$!
+$ IF (OPT_SPECIAL_THREADS.EQS."")
+$ THEN
+$!
+$!  Get The Version Of VMS We Are Using.
+$!
+$   ISSEVEN :=
+$   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
+$   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
+$!
+$!  Check To See If The VMS Version Is v7.1 Or Later.
+$!
+$   IF (TMP.GE.71)
+$   THEN
+$!
+$!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
+$!
+$     ISSEVEN := ,PTHREAD_USE_D4
+$!
+$!  End The VMS Version Check.
+$!
+$   ENDIF
+$!
+$! End The OPT_SPECIAL_THREADS Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_POINTER_SIZE Is Blank.
+$!
+$ IF (OPT_POINTER_SIZE.EQS."")
+$ THEN
+$   POINTER_SIZE = ""
+$ ELSE
+$!
+$!  Check is OPT_POINTER_SIZE Is Valid
+$!
+$   IF (OPT_POINTER_SIZE.EQS."32")
+$   THEN
+$     POINTER_SIZE = "/POINTER_SIZE=32"
+$     IF ARCH .EQS. "VAX"
+$     THEN
+$       LIB32 = ""
+$     ELSE
+$       LIB32 = "32"
+$     ENDIF
+$   ELSE
+$     IF (OPT_POINTER_SIZE.EQS."64")
+$     THEN
+$       LIB32 = ""
+$       IF ARCH .EQS. "VAX"
+$       THEN
+$         POINTER_SIZE = "/POINTER_SIZE=32"
+$       ELSE
+$         POINTER_SIZE = "/POINTER_SIZE=64"
+$       ENDIF
+$     ELSE
+$!
+$!      Tell The User Entered An Invalid Option..
+$!
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "The Option ",OPT_POINTER_SIZE," Is Invalid.  The Valid Options Are:"
+$       WRITE SYS$OUTPUT ""
+$       WRITE SYS$OUTPUT "    32  :  Compile with 32 bit pointer size"
+$       WRITE SYS$OUTPUT "    64  :  Compile with 64 bit pointer size"
+$       WRITE SYS$OUTPUT ""
+$!
+$!      Time To EXIT.
+$!
+$       GOTO TIDY
+$!
+$!      End The Valid Arguement Check.
+$!
+$     ENDIF
+$   ENDIF
+$!
+$! End The OPT_POINTER_SIZE Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_COMPILER Is Blank.
+$!
+$ IF (OPT_COMPILER.EQS."")
+$ THEN
+$!
+$!  O.K., The User Didn't Specify A Compiler, Let's Try To
+$!  Find Out Which One To Use.
+$!
+$!  Check To See If We Have GNU C.
+$!
+$   IF (F$TRNLNM("GNU_CC").NES."")
+$   THEN
+$!
+$!    Looks Like GNUC, Set To Use GNUC.
+$!
+$     OPT_COMPILER = "GNUC"
+$!
+$!  Else...
+$!
+$   ELSE
+$!
+$!    Check To See If We Have VAXC Or DECC.
+$!
+$     IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$     THEN 
+$!
+$!      Looks Like DECC, Set To Use DECC.
+$!
+$       OPT_COMPILER = "DECC"
+$!
+$!    Else...
+$!
+$     ELSE
+$!
+$!      Looks Like VAXC, Set To Use VAXC.
+$!
+$       OPT_COMPILER = "VAXC"
+$!
+$!    End The VAXC Compiler Check.
+$!
+$     ENDIF
+$!
+$!  End The DECC & VAXC Compiler Check.
+$!
+$   ENDIF
+$!
+$!  End The Compiler Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Have A Option For OPT_TCPIP_LIB.
+$!
+$ IF (OPT_TCPIP_LIB.EQS."")
+$ THEN
+$!
+$!  Find out what socket library we have available
+$!
+$   IF F$PARSE("SOCKETSHR:") .NES. ""
+$   THEN
+$!
+$!    We have SOCKETSHR, and it is my opinion that it's the best to use.
+$!
+$     OPT_TCPIP_LIB = "SOCKETSHR"
+$!
+$!    Tell the user
+$!
+$     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
+$!
+$!    Else, let's look for something else
+$!
+$   ELSE
+$!
+$!    Like UCX (the reason to do this before Multinet is that the UCX
+$!    emulation is easier to use...)
+$!
+$     IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
+	 .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
+	 .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
+$     THEN
+$!
+$!	Last resort: a UCX or UCX-compatible library
+$!
+$	OPT_TCPIP_LIB = "UCX"
+$!
+$!      Tell the user
+$!
+$       WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
+$!
+$!	That was all...
+$!
+$     ENDIF
+$   ENDIF
+$ ENDIF
+$!
+$! Set Up Initial CC Definitions, Possibly With User Ones
+$!
+$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"
+$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
+$ CCEXTRAFLAGS = ""
+$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
+	CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
+$!
+$!  Check To See If The User Entered A Valid Paramter.
+$!
+$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")
+$ THEN
+$!
+$!    Check To See If The User Wanted DECC.
+$!
+$   IF (OPT_COMPILER.EQS."DECC")
+$   THEN
+$!
+$!    Looks Like DECC, Set To Use DECC.
+$!
+$     COMPILER = "DECC"
+$!
+$!    Tell The User We Are Using DECC.
+$!
+$     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
+$!
+$!    Use DECC...
+$!
+$     CC = "CC"
+$     IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
+	 THEN CC = "CC/DECC"
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
+           "/NOLIST/PREFIX=ALL" + -
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS])" + -
+	   CCEXTRAFLAGS
+$!
+$!    Define The Linker Options File Name.
+$!
+$     OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$!
+$!  End DECC Check.
+$!
+$   ENDIF
+$!
+$!  Check To See If We Are To Use VAXC.
+$!
+$   IF (OPT_COMPILER.EQS."VAXC")
+$   THEN
+$!
+$!    Looks Like VAXC, Set To Use VAXC.
+$!
+$     COMPILER = "VAXC"
+$!
+$!    Tell The User We Are Using VAX C.
+$!
+$     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
+$!
+$!    Compile Using VAXC.
+$!
+$     CC = "CC"
+$     IF ARCH.NES."VAX"
+$     THEN
+$	WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
+$	EXIT
+$     ENDIF
+$     IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
+$     CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -
+	   CCEXTRAFLAGS
+$     CCDEFS = """VAXC""," + CCDEFS
+$!
+$!    Define <sys> As SYS$COMMON:[SYSLIB]
+$!
+$     DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
+$!
+$!    Define The Linker Options File Name.
+$!
+$     OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$!
+$!  End VAXC Check
+$!
+$   ENDIF
+$!
+$!  Check To See If We Are To Use GNU C.
+$!
+$   IF (OPT_COMPILER.EQS."GNUC")
+$   THEN
+$!
+$!    Looks Like GNUC, Set To Use GNUC.
+$!
+$     COMPILER = "GNUC"
+$!
+$!    Tell The User We Are Using GNUC.
+$!
+$     WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
+$!
+$!    Use GNU C...
+$!
+$     CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+	   "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -
+	   CCEXTRAFLAGS
+$!
+$!    Define The Linker Options File Name.
+$!
+$     OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$!
+$!  End The GNU C Check.
+$!
+$   ENDIF
+$!
+$!  Set up default defines
+$!
+$   CCDEFS = """FLAT_INC=1""," + CCDEFS
+$!
+$!  Finish up the definition of CC.
+$!
+$   IF COMPILER .EQS. "DECC"
+$   THEN
+$     IF CCDISABLEWARNINGS .NES. ""
+$     THEN
+$       CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$     ENDIF
+$   ELSE
+$     CCDISABLEWARNINGS = ""
+$   ENDIF
+$   CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$!
+$!  Show user the result
+$!
+$   WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
+$!
+$!  Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$!  Tell The User We Don't Know What They Want.
+$!
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
+$   WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
+$   WRITE SYS$OUTPUT "    GNUC  :  To Compile With GNU C."
+$   WRITE SYS$OUTPUT ""
+$!
+$!  Time To EXIT.
+$!
+$   EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! Build a MACRO command for the architecture at hand
+$!
+$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
+$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
+$!
+$!  Show user the result
+$!
+$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
+$!
+$! Time to check the contents, and to make sure we get the correct library.
+$!
+$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -
+     .OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -
+     .OR. OPT_TCPIP_LIB.EQS."NONE"
+$ THEN
+$!
+$!  Check to see if SOCKETSHR was chosen
+$!
+$   IF OPT_TCPIP_LIB.EQS."SOCKETSHR"
+$   THEN
+$!
+$!    Set the library to use SOCKETSHR
+$!
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$!
+$!    Done with SOCKETSHR
+$!
+$   ENDIF
+$!
+$!  Check to see if MULTINET was chosen
+$!
+$   IF OPT_TCPIP_LIB.EQS."MULTINET"
+$   THEN
+$!
+$!    Set the library to use UCX emulation.
+$!
+$     OPT_TCPIP_LIB = "UCX"
+$!
+$!    Done with MULTINET
+$!
+$   ENDIF
+$!
+$!  Check to see if UCX was chosen
+$!
+$   IF OPT_TCPIP_LIB.EQS."UCX"
+$   THEN
+$!
+$!    Set the library to use UCX.
+$!
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$     IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
+$     THEN
+$       TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$     ELSE
+$       IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
+	  TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+$     ENDIF
+$!
+$!    Done with UCX
+$!
+$   ENDIF
+$!
+$!  Check to see if TCPIP was chosen
+$!
+$   IF OPT_TCPIP_LIB.EQS."TCPIP"
+$   THEN
+$!
+$!    Set the library to use TCPIP (post UCX).
+$!
+$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$!    Done with TCPIP
+$!
+$   ENDIF
+$!
+$!  Check to see if NONE was chosen
+$!
+$   IF OPT_TCPIP_LIB.EQS."NONE"
+$   THEN
+$!
+$!    Do not use a TCPIP library.
+$!
+$     TCPIP_LIB = ""
+$!
+$!    Done with TCPIP
+$!
+$   ENDIF
+$!
+$!  Print info
+$!
+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$!
+$!  Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$!  Tell The User We Don't Know What They Want.
+$!
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid.  The Valid Options Are:"
+$   WRITE SYS$OUTPUT ""
+$   WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
+$   WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
+$   WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP (post UCX) TCP/IP library."
+$   WRITE SYS$OUTPUT ""
+$!
+$!  Time To EXIT.
+$!
+$   EXIT
+$!
+$!  Done with TCP/IP libraries
+$!
+$ ENDIF
+$!
+$!  Time To RETURN...
+$!
+$ RETURN
+$!
+$ INITIALISE:
+$!
+$! Save old value of the logical name OPENSSL
+$!
+$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
+$!
+$! Save directory information
+$!
+$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
+$ __HERE = F$EDIT(__HERE,"UPCASE")
+$ __TOP = __HERE - "ENGINES]"
+$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$!
+$! Set up the logical name OPENSSL to point at the include directory
+$!
+$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$!
+$! Done
+$!
+$ RETURN
+$!
+$ CLEANUP:
+$!
+$! Restore the logical name OPENSSL if it had a value
+$!
+$ IF __SAVE_OPENSSL .EQS. ""
+$ THEN
+$   DEASSIGN OPENSSL
+$ ELSE
+$   DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
+$ ENDIF
+$!
+$! Done
+$!
+$ RETURN