svn merge ^/branches/released .

1 files changed, 1411 insertions, 1354 deletions

diff --git a/openssl/makevms.com b/openssl/makevms.com
index 20211b73b..fe8271405 100644
--- a/openssl/makevms.com
+++ b/openssl/makevms.com
@@ -1,1354 +1,1411 @@
-$!
-$! MAKEVMS.COM
-$! Original Author:  UNKNOWN
-$! Rewritten By:  Robert Byer
-$!                Vice-President
-$!                A-Com Computing, Inc.
-$!                byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$!	      Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB"
-$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
-$!
-$! This procedures accepts two command line options listed below.
-$!
-$! Specify one of the following build options for P1.
-$!
-$!      ALL       Just build "everything".
-$!      CONFIG    Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!      BUILDINF  Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
-$!      SOFTLINKS Just fix the Unix soft links.
-$!      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$!      CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$!      CRYPTO/x  Just build the x part of the
-$!                "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$!      SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
-$!      SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
-$!      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
-$!      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
-$!      ENGINES   Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
-$!
-$!
-$! P2 is ignored (it was used to denote if RSAref should be used or not,
-$! and is simply kept so surrounding scripts don't get confused)
-$!
-$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging
-$! information.
-$!
-$! Specify which compiler as P4 to try to compile under.
-$!
-$!	  VAXC	 For VAX C.
-$!	  DECC	 For DEC C.
-$!	  GNUC	 For GNU C.
-$!	  LINK   To only link the programs from existing object files.
-$!               (not yet implemented)
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$!	UCX		for UCX or UCX emulation
-$!	TCPIP		for TCP/IP Services or TCP/IP Services emulation
-$!			(this is prefered over UCX)
-$!	SOCKETSHR	for SOCKETSHR+NETLIB
-$!	NONE		to avoid specifying which TCP/IP implementation to
-$!			use at build time (this works with DEC C).  This is
-$!			the default.
-$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$!
-$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
-$ ON ERROR THEN GOTO TIDY
-$ ON CONTROL_C THEN GOTO TIDY
-$!
-$! Check if we're in a batch job, and make sure we get to 
-$! the directory this script is in
-$!
-$ IF F$MODE() .EQS. "BATCH"
-$ THEN
-$   COMNAME=F$ENVIRONMENT("PROCEDURE")
-$   COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
-$   SET DEF 'COMPATH'
-$ ENDIF
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$!  The Architecture Is VAX.
-$!
-$   ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$   IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Get VMS version.
-$!
-$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Check To See What We Are To Do.
-$!
-$ IF (BUILDCOMMAND.EQS."ALL")
-$ THEN
-$!
-$!  Start with building the OpenSSL configuration file.
-$!
-$   GOSUB CONFIG
-$!
-$!  Create The "BUILDINF.H" Include File.
-$!
-$   GOSUB BUILDINF
-$!
-$!  Fix The Unix Softlinks.
-$!
-$   GOSUB SOFTLINKS
-$!
-$ ENDIF
-$!
-$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
-$ THEN
-$!
-$!  Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$   GOSUB CRYPTO
-$!
-$!  Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$   GOSUB SSL
-$!
-$!  Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.
-$!
-$   GOSUB SSL_TASK
-$!
-$!  Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
-$!
-$   GOSUB TEST
-$!
-$!  Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
-$!
-$   GOSUB APPS
-$!
-$!  Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
-$!
-$   GOSUB ENGINES
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!    Build Just What The User Wants Us To Build.
-$!
-$     GOSUB 'BUILDCOMMAND'
-$!
-$ ENDIF
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!
-$ CONFIG:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File."
-$!
-$! First, make sure the directory exists.
-$!
-$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN -
-     CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH']
-$!
-$! Different tar/UnZip versions/option may have named the file differently
-$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
-$ THEN
-$   OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
-$ ELSE
-$   IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
-$   THEN
-$     OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
-$   ELSE
-$     ! For ODS-5
-$     IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
-$     THEN
-$       OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
-$     ELSE
-$       WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in.  Exiting!"
-$       $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
-$       GOTO TIDY
-$     ENDIF
-$   ENDIF
-$ ENDIF
-$!
-$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$! Make sure it has the right format.
-$!
-$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H"
-$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
-RECORD
-        FORMAT stream_lf
-$ OPEN /APPEND H_FILE 'OSCH_NAME'
-$!
-$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
-$!
-$! Write a few macros that indicate how this system was built.
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
-$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
-$ WRITE H_FILE "#endif"
-$
-$! One of the best way to figure out what the list should be is to do
-$! the followin on a Unix system:
-$!   grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
-$! For that reason, the list will also always end up in alphabetical order
-$ CONFIG_LOGICALS := AES,-
-		     ASM,INLINE_ASM,-
-		     BF,-
-		     BIO,-
-		     BUFFER,-
-		     BUF_FREELISTS,-
-		     CAMELLIA,-
-		     CAST,-
-		     CMS,-
-		     COMP,-
-		     DEPRECATED,-
-		     DES,-
-		     DGRAM,-
-		     DH,-
-		     DSA,-
-		     EC,-
-		     ECDH,-
-		     ECDSA,-
-		     ENGINE,-
-		     ERR,-
-		     EVP,-
-		     FP_API,-
-		     GMP,-
-		     GOST,-
-		     HASH_COMP,-
-		     HMAC,-
-		     IDEA,-
-		     JPAKE,-
-		     KRB5,-
-		     LHASH,-
-		     MD2,-
-		     MD4,-
-		     MD5,-
-		     MDC2,-
-		     OCSP,-
-		     PSK,-
-		     RC2,-
-		     RC4,-
-		     RC5,-
-		     RFC3779,-
-		     RIPEMD,-
-		     RSA,-
-		     SEED,-
-		     SHA,-
-		     SHA0,-
-		     SHA1,-
-		     SHA256,-
-		     SHA512,-
-		     SOCK,-
-		     SSL2,-
-		     STACK,-
-		     STATIC_ENGINE,-
-		     STDIO,-
-		     STORE,-
-		     TLSEXT,-
-		     WHIRLPOOL,-
-		     X509
-$! Add a few that we know about
-$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
-		     THREADS
-$! The following rules, which dictate how some algorithm choices affect
-$! others, are picked from Configure.
-$! Quick syntax:
-$!  list = item[ ; list]
-$!  item = algos / dependents
-$!  algos = algo [, algos]
-$!  dependents = dependent [, dependents]
-$! When a list of algos is specified in one item, it means that they must
-$! all be disabled for the rule to apply.
-$! When a list of dependents is specified in one item, it means that they
-$! will all be disabled if the rule applies.
-$! Rules are checked sequentially.  If a rule disables an algorithm, it will
-$! affect all following rules that depend on that algorithm being disabled.
-$! To force something to be enabled or disabled, have no algorithms in the
-$! algos part.
-$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
-			  DES/MDC2;-
-			  EC/ECDSA,ECDH;-
-			  MD5/SSL2,SSL3,TLS1;-
-			  SHA/SSL3,TLS1;-
-			  RSA/SSL2;-
-			  RSA,DSA/SSL2;-
-			  DH/SSL3,TLS1;-
-			  TLS1/TLSEXT;-
-			  EC/GOST;-
-			  DSA/GOST;-
-			  DH/GOST;-
-			  /STATIC_ENGINE;-
-			  /KRB5
-$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
-			 /THREADS
-$
-$! Architecture specific rule addtions
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$   ! Disable algorithms that require 64 bit integers in C
-$   CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
-			   ";/GOST" + -
-			   ";/WHIRLPOOL"
-$ ENDIF
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP1:
-$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$   CONFIG_LOG_I = CONFIG_LOG_I + 1
-$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
-$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
-$   IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
-$   THEN
-$       CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$       CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$   ELSE
-$       CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$       CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$	! Because all algorithms are assumed enabled by default
-$	CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$   ENDIF
-$   GOTO CONFIG_LOG_LOOP1
-$ CONFIG_LOG_LOOP1_END:
-$
-$! Apply cascading disable rules
-$ CONFIG_DISABLE_I = 0
-$ CONFIG_DISABLE_LOOP0:
-$   CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM")
-$   CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
-$   IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
-$   IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
-$
-$   CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
-$   CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
-$   TO_DISABLE := YES
-$   CONFIG_ALGO_I = 0
-$   CONFIG_DISABLE_LOOP1:
-$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM")
-$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
-$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
-$     IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
-$     THEN
-$	TO_DISABLE := NO
-$     ELSE
-$	IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
-$     ENDIF
-$     GOTO CONFIG_DISABLE_LOOP1
-$   CONFIG_DISABLE_LOOP1_END:
-$
-$   IF TO_DISABLE
-$   THEN
-$     CONFIG_DEPENDENT_I = 0
-$     CONFIG_DISABLE_LOOP2:
-$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM")
-$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
-$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
-$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
-$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
-$	! Better not to assume defaults at this point...
-$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$	WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
-$	GOTO CONFIG_DISABLE_LOOP2
-$     CONFIG_DISABLE_LOOP2_END:
-$   ENDIF
-$   GOTO CONFIG_DISABLE_LOOP0
-$ CONFIG_DISABLE_LOOP0_END:
-$	
-$! Apply cascading enable rules
-$ CONFIG_ENABLE_I = 0
-$ CONFIG_ENABLE_LOOP0:
-$   CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM")
-$   CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
-$   IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
-$   IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
-$
-$   CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
-$   CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
-$   TO_ENABLE := YES
-$   CONFIG_ALGO_I = 0
-$   CONFIG_ENABLE_LOOP1:
-$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM")
-$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
-$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
-$     IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
-$     THEN
-$	TO_ENABLE := NO
-$     ELSE
-$	IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
-$     ENDIF
-$     GOTO CONFIG_ENABLE_LOOP1
-$   CONFIG_ENABLE_LOOP1_END:
-$
-$   IF TO_ENABLE
-$   THEN
-$     CONFIG_DEPENDENT_I = 0
-$     CONFIG_ENABLE_LOOP2:
-$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM")
-$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
-$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
-$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
-$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
-$	! Better not to assume defaults at this point...
-$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$	WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
-$	GOTO CONFIG_ENABLE_LOOP2
-$     CONFIG_ENABLE_LOOP2_END:
-$   ENDIF
-$   GOTO CONFIG_ENABLE_LOOP0
-$ CONFIG_ENABLE_LOOP0_END:
-$
-$! Write to the configuration
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP2:
-$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$   CONFIG_LOG_I = CONFIG_LOG_I + 1
-$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
-$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$   IF CONFIG_CHANGED_'CONFIG_LOG_E'
-$   THEN
-$     IF CONFIG_DISABLED_'CONFIG_LOG_E'
-$     THEN
-$	WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$	WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$	WRITE H_FILE "#endif"
-$     ELSE
-$	WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
-$	WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
-$	WRITE H_FILE "#endif"
-$     ENDIF
-$   ENDIF
-$   GOTO CONFIG_LOG_LOOP2
-$ CONFIG_LOG_LOOP2_END:
-$!
-$! Add in the common "crypto/opensslconf.h.in".
-$!
-$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
-$!
-$ IF ARCH .NES. "VAX"
-$ THEN
-$!
-$!  Write the non-VAX specific data
-$!
-$   WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$   WRITE H_FILE "#undef RC4_INT"
-$   WRITE H_FILE "#define RC4_INT unsigned int"
-$   WRITE H_FILE "#undef RC4_CHUNK"
-$   WRITE H_FILE "#define RC4_CHUNK unsigned long long"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$   WRITE H_FILE "#undef DES_LONG"
-$   WRITE H_FILE "#define DES_LONG unsigned int"
-$   WRITE H_FILE "#undef DES_PTR"
-$   WRITE H_FILE "#define DES_PTR"
-$   WRITE H_FILE "#undef DES_RISC1"
-$   WRITE H_FILE "#undef DES_RISC2"
-$   WRITE H_FILE "#define DES_RISC1"
-$   WRITE H_FILE "#undef DES_UNROLL"
-$   WRITE H_FILE "#define DES_UNROLL"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_BN_H)"
-$   WRITE H_FILE "#undef BN_LLONG"	! Never define with SIXTY_FOUR_BIT
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#define SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$   WRITE H_FILE "#undef SIXTEEN_BIT"
-$   WRITE H_FILE "#undef EIGHT_BIT"
-$   WRITE H_FILE "#endif"
-$
-$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$!  Else...
-$!
-$ ELSE
-$!
-$!  Write the VAX specific data
-$!
-$   WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$   WRITE H_FILE "#undef RC4_INT"
-$   WRITE H_FILE "#define RC4_INT unsigned char"
-$   WRITE H_FILE "#undef RC4_CHUNK"
-$   WRITE H_FILE "#define RC4_CHUNK unsigned long"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$   WRITE H_FILE "#undef DES_LONG"
-$   WRITE H_FILE "#define DES_LONG unsigned long"
-$   WRITE H_FILE "#undef DES_PTR"
-$   WRITE H_FILE "#define DES_PTR"
-$   WRITE H_FILE "#undef DES_RISC1"
-$   WRITE H_FILE "#undef DES_RISC2"
-$   WRITE H_FILE "#undef DES_UNROLL"
-$   WRITE H_FILE "#endif"
-$!
-$   WRITE H_FILE "#if defined(HEADER_BN_H)"
-$   WRITE H_FILE "#undef BN_LLONG"	! VAX C/DEC C doesn't have long long
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$   WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$   WRITE H_FILE "#define THIRTY_TWO_BIT"
-$   WRITE H_FILE "#undef SIXTEEN_BIT"
-$   WRITE H_FILE "#undef EIGHT_BIT"
-$   WRITE H_FILE "#endif"
-$!
-$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
-$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
-$! protect this one...
-$   WRITE H_FILE "#undef OPENSSL_NO_SHA512"
-$   WRITE H_FILE "#define OPENSSL_NO_SHA512"
-$!
-$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$   WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$!  End
-$!
-$ ENDIF
-$!
-$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
-$!
-$ BUILDINF:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File."
-$!
-$! Create The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H"
-$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
-RECORD
-        FORMAT stream_lf
-$!
-$ OPEN /APPEND H_FILE 'bih_name'
-$!
-$! Get The Current Date & Time.
-$!
-$ TIME = F$TIME()
-$!
-$! Write The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$! WRITE H_FILE "#define CFLAGS """" /* Not filled in for now */"
-$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'"""
-$ WRITE H_FILE "#define DATE ""''TIME'"" "
-$!
-$! Close The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H
-$!
-$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
-$!
-$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
-     DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Copy a lot of files around.
-$!
-$ SOFTLINKS: 
-$!
-$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
-$!
-$ DELETE SYS$DISK:[.APPS]MD4.C;*
-$!
-$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!
-$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!
-$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
-$!
-$! First, make sure the directory exists
-$!
-$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -
-     CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Copy All The ".H" Files From The Main Directory.
-$!
-$ EXHEADER := e_os2.h
-$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
-$!
-$ SDIRS := ,-
-   _'ARCH',-
-   OBJECTS,-
-   MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
-   DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-
-   BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
-   BUFFER,BIO,STACK,LHASH,RAND,ERR,-
-   EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
-   STORE,CMS,PQUEUE,TS,JPAKE
-$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
-$ EXHEADER__'ARCH' := opensslconf.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
-$ EXHEADER_MD2 := md2.h
-$ EXHEADER_MD4 := md4.h
-$ EXHEADER_MD5 := md5.h
-$ EXHEADER_SHA := sha.h
-$ EXHEADER_MDC2 := mdc2.h
-$ EXHEADER_HMAC := hmac.h
-$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h,des_old.h
-$ EXHEADER_AES := aes.h
-$ EXHEADER_RC2 := rc2.h
-$ EXHEADER_RC4 := rc4.h
-$ EXHEADER_RC5 := rc5.h
-$ EXHEADER_IDEA := idea.h
-$ EXHEADER_BF := blowfish.h
-$ EXHEADER_CAST := cast.h
-$ EXHEADER_CAMELLIA := camellia.h
-$ EXHEADER_SEED := seed.h
-$ EXHEADER_MODES := modes.h
-$ EXHEADER_BN := bn.h
-$ EXHEADER_EC := ec.h
-$ EXHEADER_RSA := rsa.h
-$ EXHEADER_DSA := dsa.h
-$ EXHEADER_ECDSA := ecdsa.h
-$ EXHEADER_DH := dh.h
-$ EXHEADER_ECDH := ecdh.h
-$ EXHEADER_DSO := dso.h
-$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_BUFFER := buffer.h
-$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h,safestack.h
-$ EXHEADER_LHASH := lhash.h
-$ EXHEADER_RAND := rand.h
-$ EXHEADER_ERR := err.h
-$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
-$ EXHEADER_PEM := pem.h,pem2.h
-$ EXHEADER_X509 := x509.h,x509_vfy.h
-$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h,conf_api.h
-$ EXHEADER_TXT_DB := txt_db.h
-$ EXHEADER_PKCS7 := pkcs7.h
-$ EXHEADER_PKCS12 := pkcs12.h
-$ EXHEADER_COMP := comp.h
-$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h,ui_compat.h
-$ EXHEADER_KRB5 := krb5_asn.h
-$!EXHEADER_STORE := store.h,str_compat.h
-$ EXHEADER_STORE := store.h
-$ EXHEADER_CMS := cms.h
-$ EXHEADER_PQUEUE := pqueue.h
-$ EXHEADER_TS := ts.h
-$ EXHEADER_JPAKE := jpake.h
-$
-$ I = 0
-$ LOOP_SDIRS: 
-$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
-$ I = I + 1
-$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
-$ tmp = EXHEADER_'D'
-$ IF D .EQS. ""
-$ THEN
-$   COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ELSE
-$   COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ENDIF
-$ GOTO LOOP_SDIRS
-$ LOOP_SDIRS_END:
-$!
-$! Copy All The ".H" Files From The [.SSL] Directory.
-$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
-$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Purge all doubles
-$!
-$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library.
-$!
-$ CRYPTO:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$!
-$! Go To The [.CRYPTO] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.CRYPTO]
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!  
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
-$!
-$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!  
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]LIBSSL.OLB" Library.
-$!
-$ SSL:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL.OLB Library."
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.
-$!
-$ SSL_TASK:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
-$!
-$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Test Programs.
-$!
-$ TEST:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."
-$!
-$! Go To The [.TEST] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.TEST]
-$!
-$! Build The Test Programs.
-$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ APPS:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."
-$!
-$! Go To The [.APPS] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.APPS]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ ENGINES:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
-$!
-$! Go To The [.ENGINES] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.ENGINES]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check if there's a "part", and separate it out
-$!
-$ BUILDPART = F$ELEMENT(1,"/",P1)
-$ IF BUILDPART .EQS. "/"
-$ THEN
-$   BUILDPART = ""
-$ ELSE
-$   P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
-$ ENDIF
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$!   P1 Is ALL, So Build Everything.
-$!
-$    BUILDCOMMAND = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Else, Check To See If P1 Has A Valid Argument.
-$!
-$   IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
-       .OR.(P1.EQS."BUILDALL") -
-       .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
-       .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
-       .OR.(P1.EQS."ENGINES")
-$   THEN
-$!
-$!    A Valid Argument.
-$!
-$     BUILDCOMMAND = P1
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Tell The User We Don't Know What They Want.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "USAGE:   @MAKEVMS.COM [Target] [not-used option] [Debug option] <Compiler>"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL NORSAREF NODEBUG "
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Target ",P1," Is Invalid.  The Valid Target Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALL      :  Just Build Everything."
-$     WRITE SYS$OUTPUT "    CONFIG   :  Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
-$     WRITE SYS$OUTPUT "    BUILDINF :  Just build the [.CRYPTO._xxx]BUILDINF.H file."
-$     WRITE SYS$OUTPUT "    SOFTLINKS:  Just Fix The Unix soft links."
-$     WRITE SYS$OUTPUT "    BUILDALL :  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
-$     WRITE SYS$OUTPUT "    CRYPTO   :  To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$     WRITE SYS$OUTPUT "    CRYPTO/x :  To Build Just The x Part Of The"
-$     WRITE SYS$OUTPUT "                [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$     WRITE SYS$OUTPUT "    SSL      :  To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
-$     WRITE SYS$OUTPUT "    SSL_TASK :  To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
-$     WRITE SYS$OUTPUT "    TEST     :  To Build Just The OpenSSL Test Programs."
-$     WRITE SYS$OUTPUT "    APPS     :  To Build Just The OpenSSL Application Programs."
-$     WRITE SYS$OUTPUT "    ENGINES  :  To Build Just The ENGINES"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    ALPHA    :  Alpha Architecture."
-$     WRITE SYS$OUTPUT "    IA64     :  IA64 Architecture."
-$     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     GOTO TIDY
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P3 Is Blank.
-$!
-$ IF (P3.EQS."NODEBUG")
-$ THEN
-$!
-$!   P3 Is NODEBUG, So Compile Without Debugger Information.
-$!
-$    DEBUGGER = "NODEBUG"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Check To See If We Are To Compile With Debugger Information.
-$!
-$   IF (P3.EQS."DEBUG")
-$   THEN
-$!
-$!    Compile With Debugger Information.
-$!
-$     DEBUGGER = "DEBUG"
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Tell The User Entered An Invalid Option..
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."
-$     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     GOTO TIDY
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P3 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P4 Is Blank.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$!  O.K., The User Didn't Specify A Compiler, Let's Try To
-$!  Find Out Which One To Use.
-$!
-$!  Check To See If We Have GNU C.
-$!
-$   IF (F$TRNLNM("GNU_CC").NES."")
-$   THEN
-$!
-$!    Looks Like GNUC, Set To Use GNUC.
-$!
-$     COMPILER = "GNUC"
-$!
-$!    Tell The User We Are Using GNUC.
-$!
-$     WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$!  End The GNU C Compiler Check.
-$!
-$   ENDIF
-$!
-$!  Check To See If We Have VAXC Or DECC.
-$!
-$   IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")
-$   THEN 
-$!
-$!    Looks Like DECC, Set To Use DECC.
-$!
-$     COMPILER = "DECC"
-$!
-$!    Tell The User We Are Using DECC.
-$!
-$     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$!  Else...
-$!
-$   ELSE
-$!
-$!    Looks Like VAXC, Set To Use VAXC.
-$!
-$     COMPILER = "VAXC"
-$!
-$!    Tell The User We Are Using VAX C.
-$!
-$     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$!  End The DECC & VAXC Compiler Check.
-$!
-$   ENDIF
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$!  Check To See If The User Entered A Valid Paramter.
-$!
-$   IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
-$   THEN
-$!
-$!    Check To See If The User Wanted To Just LINK.
-$!
-$     IF (P4.EQS."LINK")
-$     THEN
-$!
-$!      Looks Like LINK-only
-$!
-$       COMPILER = "LINK"
-$!
-$!      Tell The User We Are Only Linking.
-$!
-$       WRITE SYS$OUTPUT "LINK Only.  This actually NOT YET SUPPORTED!"
-$!
-$!    End LINK Check.
-$!
-$     ENDIF
-$!
-$!    Check To See If The User Wanted DECC.
-$!
-$     IF (P4.EQS."DECC")
-$     THEN
-$!
-$!      Looks Like DECC, Set To Use DECC.
-$!
-$       COMPILER = "DECC"
-$!
-$!      Tell The User We Are Using DECC.
-$!
-$       WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$!    End DECC Check.
-$!
-$     ENDIF
-$!
-$!    Check To See If We Are To Use VAXC.
-$!
-$     IF (P4.EQS."VAXC")
-$     THEN
-$!
-$!      Looks Like VAXC, Set To Use VAXC.
-$!
-$       COMPILER = "VAXC"
-$!
-$!      Tell The User We Are Using VAX C.
-$!
-$       WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$!    End VAXC Check
-$!
-$     ENDIF
-$!
-$!    Check To See If We Are To Use GNU C.
-$!
-$     IF (P4.EQS."GNUC")
-$     THEN
-$!
-$!      Looks Like GNUC, Set To Use GNUC.
-$!
-$       COMPILER = "GNUC"
-$!
-$!      Tell The User We Are Using GNUC.
-$!
-$       WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$!    End The GNU C Check.
-$!
-$     ENDIF
-$!
-$!  Else The User Entered An Invalid Argument.
-$!
-$   ELSE
-$!
-$!    Tell The User We Don't Know What They Want.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."
-$     WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."
-$     WRITE SYS$OUTPUT "    GNUC  :  To Compile With GNU C."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     GOTO TIDY
-$!
-$!  End The Valid Argument Check.
-$!
-$   ENDIF
-$!
-$! End The P4 Check.
-$!
-$ ENDIF
-$!
-$! Time to check the contents of P5, and to make sure we get the correct library.
-$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
-     .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
-$ THEN
-$!
-$!  Check to see if SOCKETSHR was chosen
-$!
-$   IF P5.EQS."SOCKETSHR"
-$   THEN
-$!
-$!    Set the library to use SOCKETSHR
-$!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$!    Done with SOCKETSHR
-$!
-$   ENDIF
-$!
-$!  Check to see if MULTINET was chosen
-$!
-$   IF P5.EQS."MULTINET"
-$   THEN
-$!
-$!    Set the library to use UCX emulation.
-$!
-$     P5 = "UCX"
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"
-$!
-$!    Done with MULTINET
-$!
-$   ENDIF
-$!
-$!  Check to see if UCX was chosen
-$!
-$   IF P5.EQS."UCX"
-$   THEN
-$!
-$!    Set the library to use UCX.
-$!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$!    Done with UCX
-$!
-$   ENDIF
-$!
-$!  Check to see if TCPIP was chosen
-$!
-$   IF P5.EQS."TCPIP"
-$   THEN
-$!
-$!    Set the library to use TCPIP (post UCX).
-$!
-$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
-$!
-$!    Done with TCPIP
-$!
-$   ENDIF
-$!
-$!  Check to see if NONE was chosen
-$!
-$   IF P5.EQS."NONE"
-$   THEN
-$!
-$!    Do not use a TCPIP library.
-$!
-$     TCPIP_LIB = ""
-$!
-$!    Tell the user
-$!
-$     WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
-$!
-$!    Done with NONE.
-$!
-$   ENDIF
-$!
-$!  Set the TCPIP_TYPE symbol
-$!
-$   TCPIP_TYPE = P5
-$!
-$!  Print info
-$!
-$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$!  Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$   IF P5 .NES. ""
-$   THEN
-$!
-$!    Tell The User We Don't Know What They Want.
-$!
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "The Option ",P5," Is Invalid.  The Valid Options Are:"
-$     WRITE SYS$OUTPUT ""
-$     WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."
-$     WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."
-$     WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP TCP/IP (post UCX) library."
-$     WRITE SYS$OUTPUT "    NONE       :  To not link with a specific TCP/IP library."
-$     WRITE SYS$OUTPUT ""
-$!
-$!    Time To EXIT.
-$!
-$     GOTO TIDY
-$   ELSE
-$!
-$! If TCPIP is not defined, then hardcode it to make
-$! it clear that no TCPIP is desired.
-$!
-$     IF P5 .EQS. ""
-$     THEN
-$       TCPIP_LIB = ""
-$       TCPIP_TYPE = "NONE"
-$     ELSE
-$!
-$!    Set the TCPIP_TYPE symbol
-$!
-$       TCPIP_TYPE = P5
-$     ENDIF
-$   ENDIF
-$!
-$!  Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By:  Richard Levitte
-$!              richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P6.
-$!
-$ IF (P6.EQS."")
-$ THEN
-$!
-$!  Get The Version Of VMS We Are Using.
-$!
-$   ISSEVEN :=
-$   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
-$   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$!  Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$   IF (TMP.GE.71)
-$   THEN
-$!
-$!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$     ISSEVEN := ,PTHREAD_USE_D4
-$!
-$!  End The VMS Version Check.
-$!
-$   ENDIF
-$!
-$! End The P6 Check.
-$!
-$ ENDIF
-$!
-$!  Time To RETURN...
-$!
-$ RETURN
-$!
-$ TIDY:
-$ SET DEFAULT 'DEF_ORIG'
-$ EXIT
-$!
+$!

+$! MAKEVMS.COM

+$! Original Author:  UNKNOWN

+$! Rewritten By:  Robert Byer

+$!                Vice-President

+$!                A-Com Computing, Inc.

+$!                byer@mail.all-net.net

+$!

+$! Changes by Richard Levitte <richard@levitte.org>

+$!	      Zoltan Arpadffy <zoli@polarhome.com>

+$!

+$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"

+$! "[.xxx.EXE.SSL]LIBSSL.OLB"

+$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.

+$!

+$! This procedures accepts two command line options listed below.

+$!

+$! Specify one of the following build options for P1.

+$!

+$!      ALL       Just build "everything".

+$!      CONFIG    Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.

+$!      BUILDINF  Just build the "[.CRYPTO._xxx]BUILDINF.H" file.

+$!      SOFTLINKS Just fix the Unix soft links.

+$!      BUILDALL  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.

+$!      CRYPTO    Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.

+$!      CRYPTO/x  Just build the x part of the

+$!                "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.

+$!      SSL       Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.

+$!      SSL_TASK  Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.

+$!      TEST      Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.

+$!      APPS      Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.

+$!      ENGINES   Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.

+$!

+$!

+$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2.

+$! For 32 bit architectures (VAX), P2 is ignored.

+$! Currently supported values are:

+$!

+$!	32	To ge a library compiled with /POINTER_SIZE=32

+$!	64	To ge a library compiled with /POINTER_SIZE=64

+$!

+$!

+$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging

+$! information.

+$!

+$! Specify which compiler as P4 to try to compile under.

+$!

+$!	  VAXC	 For VAX C.

+$!	  DECC	 For DEC C.

+$!	  GNUC	 For GNU C.

+$!	  LINK   To only link the programs from existing object files.

+$!               (not yet implemented)

+$!

+$! If you don't specify a compiler, it will try to determine which

+$! "C" compiler to use.

+$!

+$! P5, if defined, sets a TCP/IP library to use, through one of the following

+$! keywords:

+$!

+$!	UCX		for UCX or UCX emulation

+$!	TCPIP		for TCP/IP Services or TCP/IP Services emulation

+$!			(this is prefered over UCX)

+$!	SOCKETSHR	for SOCKETSHR+NETLIB

+$!	NONE		to avoid specifying which TCP/IP implementation to

+$!			use at build time (this works with DEC C).  This is

+$!			the default.

+$!

+$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)

+$!

+$!

+$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")

+$ ON ERROR THEN GOTO TIDY

+$ ON CONTROL_C THEN GOTO TIDY

+$!

+$! Check if we're in a batch job, and make sure we get to 

+$! the directory this script is in

+$!

+$ IF F$MODE() .EQS. "BATCH"

+$ THEN

+$   COMNAME=F$ENVIRONMENT("PROCEDURE")

+$   COMPATH=F$PARSE("A.;",COMNAME) - "A.;"

+$   SET DEF 'COMPATH'

+$ ENDIF

+$!

+$! Check What Architecture We Are Using.

+$!

+$ IF (F$GETSYI("CPU").LT.128)

+$ THEN

+$!

+$!  The Architecture Is VAX.

+$!

+$   ARCH = "VAX"

+$!

+$! Else...

+$!

+$ ELSE

+$!

+$!  The Architecture Is Alpha, IA64 or whatever comes in the future.

+$!

+$   ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")

+$   IF (ARCH .EQS. "") THEN ARCH = "UNK"

+$!

+$! End The Architecture Check.

+$!

+$ ENDIF

+$!

+$! Get VMS version.

+$!

+$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")

+$!

+$! Check To Make Sure We Have Valid Command Line Parameters.

+$!

+$ GOSUB CHECK_OPTIONS

+$!

+$! Check To See What We Are To Do.

+$!

+$ IF (BUILDCOMMAND.EQS."ALL")

+$ THEN

+$!

+$!  Start with building the OpenSSL configuration file.

+$!

+$   GOSUB CONFIG

+$!

+$!  Create The "BUILDINF.H" Include File.

+$!

+$   GOSUB BUILDINF

+$!

+$!  Fix The Unix Softlinks.

+$!

+$   GOSUB SOFTLINKS

+$!

+$ ENDIF

+$!

+$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")

+$ THEN

+$!

+$!  Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.

+$!

+$   GOSUB CRYPTO

+$!

+$!  Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.

+$!

+$   GOSUB SSL

+$!

+$!  Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.

+$!

+$   GOSUB SSL_TASK

+$!

+$!  Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.

+$!

+$   GOSUB TEST

+$!

+$!  Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.

+$!

+$   GOSUB APPS

+$!

+$!  Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.

+$!

+$   GOSUB ENGINES

+$!

+$! Else...

+$!

+$ ELSE

+$!

+$!    Build Just What The User Wants Us To Build.

+$!

+$     GOSUB 'BUILDCOMMAND'

+$!

+$ ENDIF

+$!

+$! Time To EXIT.

+$!

+$ GOTO TIDY

+$!

+$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.

+$!

+$ CONFIG:

+$!

+$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.

+$!

+$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File."

+$!

+$! First, make sure the directory exists.

+$!

+$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN -

+     CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH']

+$!

+$! Different tar/UnZip versions/option may have named the file differently

+$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""

+$ THEN

+$   OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"

+$ ELSE

+$   IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""

+$   THEN

+$     OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"

+$   ELSE

+$     ! For ODS-5

+$     IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""

+$     THEN

+$       OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"

+$     ELSE

+$       WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in.  Exiting!"

+$       $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".

+$       GOTO TIDY

+$     ENDIF

+$   ENDIF

+$ ENDIF

+$!

+$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.

+$! Make sure it has the right format.

+$!

+$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H"

+$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'

+RECORD

+        FORMAT stream_lf

+$ OPEN /APPEND H_FILE 'OSCH_NAME'

+$!

+$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.

+$!

+$ WRITE H_FILE "/* This file was automatically built using makevms.com */"

+$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"

+$!

+$! Write a few macros that indicate how this system was built.

+$!

+$ WRITE H_FILE ""

+$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"

+$ WRITE H_FILE "# define OPENSSL_SYS_VMS"

+$ WRITE H_FILE "#endif"

+$

+$! One of the best way to figure out what the list should be is to do

+$! the followin on a Unix system:

+$!   grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq

+$! For that reason, the list will also always end up in alphabetical order

+$ CONFIG_LOGICALS := AES,-

+		     ASM,INLINE_ASM,-

+		     BF,-

+		     BIO,-

+		     BUFFER,-

+		     BUF_FREELISTS,-

+		     CAMELLIA,-

+		     CAST,-

+		     CMS,-

+		     COMP,-

+		     DEPRECATED,-

+		     DES,-

+		     DGRAM,-

+		     DH,-

+		     DSA,-

+		     EC,-

+		     ECDH,-

+		     ECDSA,-

+		     ENGINE,-

+		     ERR,-

+		     EVP,-

+		     FP_API,-

+		     GMP,-

+		     GOST,-

+		     HASH_COMP,-

+		     HMAC,-

+		     IDEA,-

+		     JPAKE,-

+		     KRB5,-

+		     LHASH,-

+		     MD2,-

+		     MD4,-

+		     MD5,-

+		     MDC2,-

+		     OCSP,-

+		     PSK,-

+		     RC2,-

+		     RC4,-

+		     RC5,-

+		     RFC3779,-

+		     RIPEMD,-

+		     RSA,-

+		     SEED,-

+		     SHA,-

+		     SHA0,-

+		     SHA1,-

+		     SHA256,-

+		     SHA512,-

+		     SOCK,-

+		     SSL2,-

+		     STACK,-

+		     STATIC_ENGINE,-

+		     STDIO,-

+		     STORE,-

+		     TLSEXT,-

+		     WHIRLPOOL,-

+		     X509

+$! Add a few that we know about

+$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-

+		     THREADS

+$! The following rules, which dictate how some algorithm choices affect

+$! others, are picked from Configure.

+$! Quick syntax:

+$!  list = item[ ; list]

+$!  item = algos / dependents

+$!  algos = algo [, algos]

+$!  dependents = dependent [, dependents]

+$! When a list of algos is specified in one item, it means that they must

+$! all be disabled for the rule to apply.

+$! When a list of dependents is specified in one item, it means that they

+$! will all be disabled if the rule applies.

+$! Rules are checked sequentially.  If a rule disables an algorithm, it will

+$! affect all following rules that depend on that algorithm being disabled.

+$! To force something to be enabled or disabled, have no algorithms in the

+$! algos part.

+$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-

+			  DES/MDC2;-

+			  EC/ECDSA,ECDH;-

+			  MD5/SSL2,SSL3,TLS1;-

+			  SHA/SSL3,TLS1;-

+			  RSA/SSL2;-

+			  RSA,DSA/SSL2;-

+			  DH/SSL3,TLS1;-

+			  TLS1/TLSEXT;-

+			  EC/GOST;-

+			  DSA/GOST;-

+			  DH/GOST;-

+			  /STATIC_ENGINE;-

+			  /KRB5

+$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-

+			 /THREADS

+$

+$! Architecture specific rule addtions

+$ IF ARCH .EQS. "VAX"

+$ THEN

+$   ! Disable algorithms that require 64 bit integers in C

+$   CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -

+			   ";/GOST" + -

+			   ";/WHIRLPOOL"

+$ ENDIF

+$

+$ CONFIG_LOG_I = 0

+$ CONFIG_LOG_LOOP1:

+$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")

+$   CONFIG_LOG_I = CONFIG_LOG_I + 1

+$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1

+$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END

+$   IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)

+$   THEN

+$       CONFIG_DISABLED_'CONFIG_LOG_E' := YES

+$       CONFIG_ENABLED_'CONFIG_LOG_E' := NO

+$	CONFIG_CHANGED_'CONFIG_LOG_E' := YES

+$   ELSE

+$       CONFIG_DISABLED_'CONFIG_LOG_E' := NO

+$       CONFIG_ENABLED_'CONFIG_LOG_E' := YES

+$	! Because all algorithms are assumed enabled by default

+$	CONFIG_CHANGED_'CONFIG_LOG_E' := NO

+$   ENDIF

+$   GOTO CONFIG_LOG_LOOP1

+$ CONFIG_LOG_LOOP1_END:

+$

+$! Apply cascading disable rules

+$ CONFIG_DISABLE_I = 0

+$ CONFIG_DISABLE_LOOP0:

+$   CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM")

+$   CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1

+$   IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0

+$   IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END

+$

+$   CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")

+$   CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")

+$   TO_DISABLE := YES

+$   CONFIG_ALGO_I = 0

+$   CONFIG_DISABLE_LOOP1:

+$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM")

+$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1

+$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1

+$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END

+$     IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""

+$     THEN

+$	TO_DISABLE := NO

+$     ELSE

+$	IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO

+$     ENDIF

+$     GOTO CONFIG_DISABLE_LOOP1

+$   CONFIG_DISABLE_LOOP1_END:

+$

+$   IF TO_DISABLE

+$   THEN

+$     CONFIG_DEPENDENT_I = 0

+$     CONFIG_DISABLE_LOOP2:

+$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM")

+$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1

+$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2

+$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END

+$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES

+$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO

+$	! Better not to assume defaults at this point...

+$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES

+$	WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"

+$	GOTO CONFIG_DISABLE_LOOP2

+$     CONFIG_DISABLE_LOOP2_END:

+$   ENDIF

+$   GOTO CONFIG_DISABLE_LOOP0

+$ CONFIG_DISABLE_LOOP0_END:

+$	

+$! Apply cascading enable rules

+$ CONFIG_ENABLE_I = 0

+$ CONFIG_ENABLE_LOOP0:

+$   CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM")

+$   CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1

+$   IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0

+$   IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END

+$

+$   CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")

+$   CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")

+$   TO_ENABLE := YES

+$   CONFIG_ALGO_I = 0

+$   CONFIG_ENABLE_LOOP1:

+$     CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM")

+$     CONFIG_ALGO_I = CONFIG_ALGO_I + 1

+$     IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1

+$     IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END

+$     IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""

+$     THEN

+$	TO_ENABLE := NO

+$     ELSE

+$	IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO

+$     ENDIF

+$     GOTO CONFIG_ENABLE_LOOP1

+$   CONFIG_ENABLE_LOOP1_END:

+$

+$   IF TO_ENABLE

+$   THEN

+$     CONFIG_DEPENDENT_I = 0

+$     CONFIG_ENABLE_LOOP2:

+$	CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM")

+$	CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1

+$	IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2

+$	IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END

+$       CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO

+$       CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES

+$	! Better not to assume defaults at this point...

+$	CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES

+$	WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"

+$	GOTO CONFIG_ENABLE_LOOP2

+$     CONFIG_ENABLE_LOOP2_END:

+$   ENDIF

+$   GOTO CONFIG_ENABLE_LOOP0

+$ CONFIG_ENABLE_LOOP0_END:

+$

+$! Write to the configuration

+$ CONFIG_LOG_I = 0

+$ CONFIG_LOG_LOOP2:

+$   CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")

+$   CONFIG_LOG_I = CONFIG_LOG_I + 1

+$   IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2

+$   IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END

+$   IF CONFIG_CHANGED_'CONFIG_LOG_E'

+$   THEN

+$     IF CONFIG_DISABLED_'CONFIG_LOG_E'

+$     THEN

+$	WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E

+$	WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E

+$	WRITE H_FILE "#endif"

+$     ELSE

+$	WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E

+$	WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E

+$	WRITE H_FILE "#endif"

+$     ENDIF

+$   ENDIF

+$   GOTO CONFIG_LOG_LOOP2

+$ CONFIG_LOG_LOOP2_END:

+$!

+$! Add in the common "crypto/opensslconf.h.in".

+$!

+$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:

+$!

+$ IF ARCH .NES. "VAX"

+$ THEN

+$!

+$!  Write the non-VAX specific data

+$!

+$   WRITE H_FILE "#if defined(HEADER_RC4_H)"

+$   WRITE H_FILE "#undef RC4_INT"

+$   WRITE H_FILE "#define RC4_INT unsigned int"

+$   WRITE H_FILE "#undef RC4_CHUNK"

+$   WRITE H_FILE "#define RC4_CHUNK unsigned long long"

+$   WRITE H_FILE "#endif"

+$!

+$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"

+$   WRITE H_FILE "#undef DES_LONG"

+$   WRITE H_FILE "#define DES_LONG unsigned int"

+$   WRITE H_FILE "#undef DES_PTR"

+$   WRITE H_FILE "#define DES_PTR"

+$   WRITE H_FILE "#undef DES_RISC1"

+$   WRITE H_FILE "#undef DES_RISC2"

+$   WRITE H_FILE "#define DES_RISC1"

+$   WRITE H_FILE "#undef DES_UNROLL"

+$   WRITE H_FILE "#define DES_UNROLL"

+$   WRITE H_FILE "#endif"

+$!

+$   WRITE H_FILE "#if defined(HEADER_BN_H)"

+$   WRITE H_FILE "#undef BN_LLONG"	! Never define with SIXTY_FOUR_BIT

+$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"

+$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"

+$   WRITE H_FILE "#define SIXTY_FOUR_BIT"

+$   WRITE H_FILE "#undef THIRTY_TWO_BIT"

+$   WRITE H_FILE "#undef SIXTEEN_BIT"

+$   WRITE H_FILE "#undef EIGHT_BIT"

+$   WRITE H_FILE "#endif"

+$

+$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"

+$!

+$!  Else...

+$!

+$ ELSE

+$!

+$!  Write the VAX specific data

+$!

+$   WRITE H_FILE "#if defined(HEADER_RC4_H)"

+$   WRITE H_FILE "#undef RC4_INT"

+$   WRITE H_FILE "#define RC4_INT unsigned char"

+$   WRITE H_FILE "#undef RC4_CHUNK"

+$   WRITE H_FILE "#define RC4_CHUNK unsigned long"

+$   WRITE H_FILE "#endif"

+$!

+$   WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"

+$   WRITE H_FILE "#undef DES_LONG"

+$   WRITE H_FILE "#define DES_LONG unsigned long"

+$   WRITE H_FILE "#undef DES_PTR"

+$   WRITE H_FILE "#define DES_PTR"

+$   WRITE H_FILE "#undef DES_RISC1"

+$   WRITE H_FILE "#undef DES_RISC2"

+$   WRITE H_FILE "#undef DES_UNROLL"

+$   WRITE H_FILE "#endif"

+$!

+$   WRITE H_FILE "#if defined(HEADER_BN_H)"

+$   WRITE H_FILE "#undef BN_LLONG"	! VAX C/DEC C doesn't have long long

+$   WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"

+$   WRITE H_FILE "#undef SIXTY_FOUR_BIT"

+$   WRITE H_FILE "#undef THIRTY_TWO_BIT"

+$   WRITE H_FILE "#define THIRTY_TWO_BIT"

+$   WRITE H_FILE "#undef SIXTEEN_BIT"

+$   WRITE H_FILE "#undef EIGHT_BIT"

+$   WRITE H_FILE "#endif"

+$!

+$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c

+$! before sha.h gets included (and HEADER_SHA_H defined), so we will not

+$! protect this one...

+$   WRITE H_FILE "#undef OPENSSL_NO_SHA512"

+$   WRITE H_FILE "#define OPENSSL_NO_SHA512"

+$!

+$   WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"

+$   WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"

+$!

+$!  End

+$!

+$ ENDIF

+$!

+$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file

+$!

+$ CLOSE H_FILE

+$!

+$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file

+$!

+$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.

+$!

+$ BUILDINF:

+$!

+$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.

+$!

+$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File."

+$!

+$! Create The [.CRYPTO._xxx]BUILDINF.H File.

+$!

+$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H"

+$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'

+RECORD

+        FORMAT stream_lf

+$!

+$ OPEN /APPEND H_FILE 'bih_name'

+$!

+$! Get The Current Date & Time.

+$!

+$ TIME = F$TIME()

+$!

+$! Write The [.CRYPTO._xxx]BUILDINF.H File.

+$!

+$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'"""

+$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'"""

+$ WRITE H_FILE "#define DATE ""''TIME'"" "

+$!

+$! Close The [.CRYPTO._xxx]BUILDINF.H File.

+$!

+$ CLOSE H_FILE

+$!

+$! Purge The [.CRYPTO._xxx]BUILDINF.H File.

+$!

+$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H

+$!

+$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.

+$!

+$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -

+     DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Copy a lot of files around.

+$!

+$ SOFTLINKS: 

+$!

+$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.

+$!

+$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."

+$!

+$ DELETE SYS$DISK:[.APPS]MD4.C;*

+$!

+$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]

+$!

+$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]

+$!

+$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.

+$!

+$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."

+$!

+$! First, make sure the directory exists

+$!

+$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -

+     CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]

+$!

+$! Copy All The ".H" Files From The Main Directory.

+$!

+$ EXHEADER := e_os2.h

+$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]

+$!

+$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.

+$!

+$ SDIRS := ,-

+   _'ARCH',-

+   OBJECTS,-

+   MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-

+   DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-

+   BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-

+   BUFFER,BIO,STACK,LHASH,RAND,ERR,-

+   EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-

+   STORE,CMS,PQUEUE,TS,JPAKE

+$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h

+$ EXHEADER__'ARCH' := opensslconf.h

+$ EXHEADER_OBJECTS := objects.h,obj_mac.h

+$ EXHEADER_MD2 := md2.h

+$ EXHEADER_MD4 := md4.h

+$ EXHEADER_MD5 := md5.h

+$ EXHEADER_SHA := sha.h

+$ EXHEADER_MDC2 := mdc2.h

+$ EXHEADER_HMAC := hmac.h

+$ EXHEADER_RIPEMD := ripemd.h

+$ EXHEADER_WHRLPOOL := whrlpool.h

+$ EXHEADER_DES := des.h,des_old.h

+$ EXHEADER_AES := aes.h

+$ EXHEADER_RC2 := rc2.h

+$ EXHEADER_RC4 := rc4.h

+$ EXHEADER_RC5 := rc5.h

+$ EXHEADER_IDEA := idea.h

+$ EXHEADER_BF := blowfish.h

+$ EXHEADER_CAST := cast.h

+$ EXHEADER_CAMELLIA := camellia.h

+$ EXHEADER_SEED := seed.h

+$ EXHEADER_MODES := modes.h

+$ EXHEADER_BN := bn.h

+$ EXHEADER_EC := ec.h

+$ EXHEADER_RSA := rsa.h

+$ EXHEADER_DSA := dsa.h

+$ EXHEADER_ECDSA := ecdsa.h

+$ EXHEADER_DH := dh.h

+$ EXHEADER_ECDH := ecdh.h

+$ EXHEADER_DSO := dso.h

+$ EXHEADER_ENGINE := engine.h

+$ EXHEADER_BUFFER := buffer.h

+$ EXHEADER_BIO := bio.h

+$ EXHEADER_STACK := stack.h,safestack.h

+$ EXHEADER_LHASH := lhash.h

+$ EXHEADER_RAND := rand.h

+$ EXHEADER_ERR := err.h

+$ EXHEADER_EVP := evp.h

+$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h

+$ EXHEADER_PEM := pem.h,pem2.h

+$ EXHEADER_X509 := x509.h,x509_vfy.h

+$ EXHEADER_X509V3 := x509v3.h

+$ EXHEADER_CONF := conf.h,conf_api.h

+$ EXHEADER_TXT_DB := txt_db.h

+$ EXHEADER_PKCS7 := pkcs7.h

+$ EXHEADER_PKCS12 := pkcs12.h

+$ EXHEADER_COMP := comp.h

+$ EXHEADER_OCSP := ocsp.h

+$ EXHEADER_UI := ui.h,ui_compat.h

+$ EXHEADER_KRB5 := krb5_asn.h

+$!EXHEADER_STORE := store.h,str_compat.h

+$ EXHEADER_STORE := store.h

+$ EXHEADER_CMS := cms.h

+$ EXHEADER_PQUEUE := pqueue.h

+$ EXHEADER_TS := ts.h

+$ EXHEADER_JPAKE := jpake.h

+$

+$ I = 0

+$ LOOP_SDIRS: 

+$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")

+$ I = I + 1

+$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END

+$ tmp = EXHEADER_'D'

+$ IF D .EQS. ""

+$ THEN

+$   COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG

+$ ELSE

+$   COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG

+$ ENDIF

+$ GOTO LOOP_SDIRS

+$ LOOP_SDIRS_END:

+$!

+$! Copy All The ".H" Files From The [.SSL] Directory.

+$!

+$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h

+$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]

+$!

+$! Purge all doubles

+$!

+$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library.

+$!

+$ CRYPTO:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library."

+$!

+$! Go To The [.CRYPTO] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.CRYPTO]

+$!

+$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.

+$!  

+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"

+$!

+$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.

+$!  

+$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! Time To RETURN.

+$!

+$ RETURN

+$!

+$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library.

+$!

+$ SSL:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library."

+$!

+$! Go To The [.SSL] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.SSL]

+$!

+$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.

+$!

+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! Time To Return.

+$!

+$ RETURN

+$!

+$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.

+$!

+$ SSL_TASK:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"

+$!

+$! Go To The [.SSL] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.SSL]

+$!

+$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE

+$!

+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Build The OpenSSL Test Programs.

+$!

+$ TEST:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."

+$!

+$! Go To The [.TEST] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.TEST]

+$!

+$! Build The Test Programs.

+$!

+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Build The OpenSSL Application Programs.

+$!

+$ APPS:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."

+$!

+$! Go To The [.APPS] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.APPS]

+$!

+$! Build The Application Programs.

+$!

+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Build The OpenSSL Application Programs.

+$!

+$ ENGINES:

+$!

+$! Tell The User What We Are Doing.

+$!

+$ WRITE SYS$OUTPUT ""

+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."

+$!

+$! Go To The [.ENGINES] Directory.

+$!

+$ SET DEFAULT SYS$DISK:[.ENGINES]

+$!

+$! Build The Application Programs.

+$!

+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"

+$!

+$! Go Back To The Main Directory.

+$!

+$ SET DEFAULT [-]

+$!

+$! That's All, Time To RETURN.

+$!

+$ RETURN

+$!

+$! Check The User's Options.

+$!

+$ CHECK_OPTIONS:

+$!

+$! Check if there's a "part", and separate it out

+$!

+$ BUILDPART = F$ELEMENT(1,"/",P1)

+$ IF BUILDPART .EQS. "/"

+$ THEN

+$   BUILDPART = ""

+$ ELSE

+$   P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)

+$ ENDIF

+$!

+$! Check To See If P1 Is Blank.

+$!

+$ IF (P1.EQS."ALL")

+$ THEN

+$!

+$!   P1 Is ALL, So Build Everything.

+$!

+$    BUILDCOMMAND = "ALL"

+$!

+$! Else...

+$!

+$ ELSE

+$!

+$!  Else, Check To See If P1 Has A Valid Argument.

+$!

+$   IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -

+       .OR.(P1.EQS."BUILDALL") -

+       .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -

+       .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -

+       .OR.(P1.EQS."ENGINES")

+$   THEN

+$!

+$!    A Valid Argument.

+$!

+$     BUILDCOMMAND = P1

+$!

+$!  Else...

+$!

+$   ELSE

+$!

+$!    Tell The User We Don't Know What They Want.

+$!

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "USAGE:   @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "The Target ",P1," Is Invalid.  The Valid Target Options Are:"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "    ALL      :  Just Build Everything."

+$     WRITE SYS$OUTPUT "    CONFIG   :  Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."

+$     WRITE SYS$OUTPUT "    BUILDINF :  Just build the [.CRYPTO._xxx]BUILDINF.H file."

+$     WRITE SYS$OUTPUT "    SOFTLINKS:  Just Fix The Unix soft links."

+$     WRITE SYS$OUTPUT "    BUILDALL :  Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."

+$     WRITE SYS$OUTPUT "    CRYPTO   :  To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."

+$     WRITE SYS$OUTPUT "    CRYPTO/x :  To Build Just The x Part Of The"

+$     WRITE SYS$OUTPUT "                [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."

+$     WRITE SYS$OUTPUT "    SSL      :  To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."

+$     WRITE SYS$OUTPUT "    SSL_TASK :  To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."

+$     WRITE SYS$OUTPUT "    TEST     :  To Build Just The OpenSSL Test Programs."

+$     WRITE SYS$OUTPUT "    APPS     :  To Build Just The OpenSSL Application Programs."

+$     WRITE SYS$OUTPUT "    ENGINES  :  To Build Just The ENGINES"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT " Where 'xxx' Stands For:"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "    ALPHA    :  Alpha Architecture."

+$     WRITE SYS$OUTPUT "    IA64     :  IA64 Architecture."

+$     WRITE SYS$OUTPUT "    VAX      :  VAX Architecture."

+$     WRITE SYS$OUTPUT ""

+$!

+$!    Time To EXIT.

+$!

+$     GOTO TIDY

+$!

+$!  End The Valid Argument Check.

+$!

+$   ENDIF

+$!

+$! End The P1 Check.

+$!

+$ ENDIF

+$!

+$! Check To See If P2 Is Blank.

+$!

+$ IF (P2.EQS."")

+$ THEN

+$   POINTER_SIZE = ""

+$ ELSE

+$!

+$!  Check is P2 Is Valid

+$!

+$   IF (P2.EQS."32")

+$   THEN

+$     POINTER_SIZE = "32"

+$     IF ARCH .EQS. "VAX"

+$     THEN

+$       LIB32 = ""

+$     ELSE

+$       LIB32 = "32"

+$     ENDIF

+$   ELSE

+$     IF (P2.EQS."64")

+$     THEN

+$       LIB32 = ""

+$       IF ARCH .EQS. "VAX"

+$       THEN

+$         POINTER_SIZE = "32"

+$       ELSE

+$         POINTER_SIZE = "64"

+$       ENDIF

+$     ELSE

+$!

+$!      Tell The User Entered An Invalid Option..

+$!

+$       WRITE SYS$OUTPUT ""

+$       WRITE SYS$OUTPUT "The Option ",P2," Is Invalid.  The Valid Options Are:"

+$       WRITE SYS$OUTPUT ""

+$       WRITE SYS$OUTPUT "    32  :  Compile with 32 bit pointer size"

+$       WRITE SYS$OUTPUT "    64  :  Compile with 64 bit pointer size"

+$       WRITE SYS$OUTPUT ""

+$!

+$!      Time To EXIT.

+$!

+$       GOTO TIDY

+$!

+$!      End The Valid Arguement Check.

+$!

+$     ENDIF

+$   ENDIF

+$!

+$! End The P2 Check.

+$!

+$ ENDIF

+$!

+$! Check To See If P3 Is Blank.

+$!

+$ IF (P3.EQS."NODEBUG")

+$ THEN

+$!

+$!   P3 Is NODEBUG, So Compile Without Debugger Information.

+$!

+$    DEBUGGER = "NODEBUG"

+$!

+$! Else...

+$!

+$ ELSE

+$!

+$!  Check To See If We Are To Compile With Debugger Information.

+$!

+$   IF (P3.EQS."DEBUG")

+$   THEN

+$!

+$!    Compile With Debugger Information.

+$!

+$     DEBUGGER = "DEBUG"

+$!

+$!  Else...

+$!

+$   ELSE

+$!

+$!    Tell The User Entered An Invalid Option..

+$!

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "The Option ",P3," Is Invalid.  The Valid Options Are:"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "    DEBUG    :  Compile With The Debugger Information."

+$     WRITE SYS$OUTPUT "    NODEBUG  :  Compile Without The Debugger Information."

+$     WRITE SYS$OUTPUT ""

+$!

+$!    Time To EXIT.

+$!

+$     GOTO TIDY

+$!

+$!  End The Valid Argument Check.

+$!

+$   ENDIF

+$!

+$! End The P3 Check.

+$!

+$ ENDIF

+$!

+$! Check To See If P4 Is Blank.

+$!

+$ IF (P4.EQS."")

+$ THEN

+$!

+$!  O.K., The User Didn't Specify A Compiler, Let's Try To

+$!  Find Out Which One To Use.

+$!

+$!  Check To See If We Have GNU C.

+$!

+$   IF (F$TRNLNM("GNU_CC").NES."")

+$   THEN

+$!

+$!    Looks Like GNUC, Set To Use GNUC.

+$!

+$     COMPILER = "GNUC"

+$!

+$!    Tell The User We Are Using GNUC.

+$!

+$     WRITE SYS$OUTPUT "Using GNU 'C' Compiler."

+$!

+$!  End The GNU C Compiler Check.

+$!

+$   ENDIF

+$!

+$!  Check To See If We Have VAXC Or DECC.

+$!

+$   IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")

+$   THEN 

+$!

+$!    Looks Like DECC, Set To Use DECC.

+$!

+$     COMPILER = "DECC"

+$!

+$!    Tell The User We Are Using DECC.

+$!

+$     WRITE SYS$OUTPUT "Using DECC 'C' Compiler."

+$!

+$!  Else...

+$!

+$   ELSE

+$!

+$!    Looks Like VAXC, Set To Use VAXC.

+$!

+$     COMPILER = "VAXC"

+$!

+$!    Tell The User We Are Using VAX C.

+$!

+$     WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."

+$!

+$!  End The DECC & VAXC Compiler Check.

+$!

+$   ENDIF

+$!

+$! Else...

+$!

+$ ELSE

+$!

+$!  Check To See If The User Entered A Valid Paramter.

+$!

+$   IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")

+$   THEN

+$!

+$!    Check To See If The User Wanted To Just LINK.

+$!

+$     IF (P4.EQS."LINK")

+$     THEN

+$!

+$!      Looks Like LINK-only

+$!

+$       COMPILER = "LINK"

+$!

+$!      Tell The User We Are Only Linking.

+$!

+$       WRITE SYS$OUTPUT "LINK Only.  This actually NOT YET SUPPORTED!"

+$!

+$!    End LINK Check.

+$!

+$     ENDIF

+$!

+$!    Check To See If The User Wanted DECC.

+$!

+$     IF (P4.EQS."DECC")

+$     THEN

+$!

+$!      Looks Like DECC, Set To Use DECC.

+$!

+$       COMPILER = "DECC"

+$!

+$!      Tell The User We Are Using DECC.

+$!

+$       WRITE SYS$OUTPUT "Using DECC 'C' Compiler."

+$!

+$!    End DECC Check.

+$!

+$     ENDIF

+$!

+$!    Check To See If We Are To Use VAXC.

+$!

+$     IF (P4.EQS."VAXC")

+$     THEN

+$!

+$!      Looks Like VAXC, Set To Use VAXC.

+$!

+$       COMPILER = "VAXC"

+$!

+$!      Tell The User We Are Using VAX C.

+$!

+$       WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."

+$!

+$!    End VAXC Check

+$!

+$     ENDIF

+$!

+$!    Check To See If We Are To Use GNU C.

+$!

+$     IF (P4.EQS."GNUC")

+$     THEN

+$!

+$!      Looks Like GNUC, Set To Use GNUC.

+$!

+$       COMPILER = "GNUC"

+$!

+$!      Tell The User We Are Using GNUC.

+$!

+$       WRITE SYS$OUTPUT "Using GNU 'C' Compiler."

+$!

+$!    End The GNU C Check.

+$!

+$     ENDIF

+$!

+$!  Else The User Entered An Invalid Argument.

+$!

+$   ELSE

+$!

+$!    Tell The User We Don't Know What They Want.

+$!

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "The Option ",P4," Is Invalid.  The Valid Options Are:"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "    VAXC  :  To Compile With VAX C."

+$     WRITE SYS$OUTPUT "    DECC  :  To Compile With DEC C."

+$     WRITE SYS$OUTPUT "    GNUC  :  To Compile With GNU C."

+$     WRITE SYS$OUTPUT ""

+$!

+$!    Time To EXIT.

+$!

+$     GOTO TIDY

+$!

+$!  End The Valid Argument Check.

+$!

+$   ENDIF

+$!

+$! End The P4 Check.

+$!

+$ ENDIF

+$!

+$! Time to check the contents of P5, and to make sure we get the correct library.

+$!

+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -

+     .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"

+$ THEN

+$!

+$!  Check to see if SOCKETSHR was chosen

+$!

+$   IF P5.EQS."SOCKETSHR"

+$   THEN

+$!

+$!    Set the library to use SOCKETSHR

+$!

+$     TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"

+$!

+$!    Tell the user

+$!

+$     WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"

+$!

+$!    Done with SOCKETSHR

+$!

+$   ENDIF

+$!

+$!  Check to see if MULTINET was chosen

+$!

+$   IF P5.EQS."MULTINET"

+$   THEN

+$!

+$!    Set the library to use UCX emulation.

+$!

+$     P5 = "UCX"

+$!

+$!    Tell the user

+$!

+$     WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"

+$!

+$!    Done with MULTINET

+$!

+$   ENDIF

+$!

+$!  Check to see if UCX was chosen

+$!

+$   IF P5.EQS."UCX"

+$   THEN

+$!

+$!    Set the library to use UCX.

+$!

+$     TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"

+$!

+$!    Tell the user

+$!

+$     WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"

+$!

+$!    Done with UCX

+$!

+$   ENDIF

+$!

+$!  Check to see if TCPIP was chosen

+$!

+$   IF P5.EQS."TCPIP"

+$   THEN

+$!

+$!    Set the library to use TCPIP (post UCX).

+$!

+$     TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"

+$!

+$!    Tell the user

+$!

+$     WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"

+$!

+$!    Done with TCPIP

+$!

+$   ENDIF

+$!

+$!  Check to see if NONE was chosen

+$!

+$   IF P5.EQS."NONE"

+$   THEN

+$!

+$!    Do not use a TCPIP library.

+$!

+$     TCPIP_LIB = ""

+$!

+$!    Tell the user

+$!

+$     WRITE SYS$OUTPUT "A specific TCPIP library will not be used."

+$!

+$!    Done with NONE.

+$!

+$   ENDIF

+$!

+$!  Set the TCPIP_TYPE symbol

+$!

+$   TCPIP_TYPE = P5

+$!

+$!  Print info

+$!

+$   WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB

+$!

+$!  Else The User Entered An Invalid Argument.

+$!

+$ ELSE

+$   IF P5 .NES. ""

+$   THEN

+$!

+$!    Tell The User We Don't Know What They Want.

+$!

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "The Option ",P5," Is Invalid.  The Valid Options Are:"

+$     WRITE SYS$OUTPUT ""

+$     WRITE SYS$OUTPUT "    SOCKETSHR  :  To link with SOCKETSHR TCP/IP library."

+$     WRITE SYS$OUTPUT "    UCX        :  To link with UCX TCP/IP library."

+$     WRITE SYS$OUTPUT "    TCPIP      :  To link with TCPIP TCP/IP (post UCX) library."

+$     WRITE SYS$OUTPUT "    NONE       :  To not link with a specific TCP/IP library."

+$     WRITE SYS$OUTPUT ""

+$!

+$!    Time To EXIT.

+$!

+$     GOTO TIDY

+$   ELSE

+$!

+$! If TCPIP is not defined, then hardcode it to make

+$! it clear that no TCPIP is desired.

+$!

+$     IF P5 .EQS. ""

+$     THEN

+$       TCPIP_LIB = ""

+$       TCPIP_TYPE = "NONE"

+$     ELSE

+$!

+$!    Set the TCPIP_TYPE symbol

+$!

+$       TCPIP_TYPE = P5

+$     ENDIF

+$   ENDIF

+$!

+$!  Done with TCP/IP libraries

+$!

+$ ENDIF

+$!

+$! Special Threads For OpenVMS v7.1 Or Later

+$!

+$! Written By:  Richard Levitte

+$!              richard@levitte.org

+$!

+$!

+$! Check To See If We Have A Option For P6.

+$!

+$ IF (P6.EQS."")

+$ THEN

+$!

+$!  Get The Version Of VMS We Are Using.

+$!

+$   ISSEVEN :=

+$   TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))

+$   TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))

+$!

+$!  Check To See If The VMS Version Is v7.1 Or Later.

+$!

+$   IF (TMP.GE.71)

+$   THEN

+$!

+$!    We Have OpenVMS v7.1 Or Later, So Use The Special Threads.

+$!

+$     ISSEVEN := ,PTHREAD_USE_D4

+$!

+$!  End The VMS Version Check.

+$!

+$   ENDIF

+$!

+$! End The P6 Check.

+$!

+$ ENDIF

+$!

+$!  Time To RETURN...

+$!

+$ RETURN

+$!

+$ TIDY:

+$ SET DEFAULT 'DEF_ORIG'

+$ EXIT

+$!