Use bison instead of bison++

The += operator should also take the environment variables into account
Solved problem when & in redirect operator on command line
Solved syntax error when SPACE was follewed by SPACE
Removed kdevelop3 project files
Enable debug info in debug build on linux
Added support for foreach function
Fixed dependency problem for implicit rules with extra dependencies
Increased gnu make compatibility: allow implicit rules without commands
Solved wrong error message when it cannot build a target in mhmake_dbg
On windows: when checking the extension of a command: make sure a / does not cause a wrong decision
Added safety against recursive implicit rules.
Fixed wrong check on failure to open makefiles.
Make sure no message is printed when -include is used
flex and bison generated files: make sure the #line statements have the correct line numbers for the debugger after having added one line in the beginning of the file after running the flex/bison.
Make sure that the variable defined just before an error or message/info macro is defined when the message is generated.
mhmake_dbg: print error message when a target cannot be build because the directory of the target does not exist (and no rule is defined for it)
Reformatted message/info macro output
Also print makefile and line number when using error and message macro
Solved crash in mhmake_dbg when -C is specified on the command line
Solved problem in macro expansion when 2 patsubst inside each other
addprefix should not give an error when done on an empty string
Use comspec when echo is followed by a pipe character (piping is not supported by the echo internal command of mhmake)
Solved possible stack curruption (there was little chance that this was occuring)

1 files changed, 0 insertions, 441 deletions

diff --git a/tools/mhmake/depcomp b/tools/mhmake/depcomp
deleted file mode 100644
index 4c20c6c94..000000000
--- a/tools/mhmake/depcomp
+++ /dev/null
@@ -1,441 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
-  # Also, the AIX compiler puts `$object:' at the start of each line;
-  # $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  outname="$stripped.o"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Must come before tru64.
-
-  # Intel's C compiler understands `-MD -MF file'.  However
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-
-   tmpdepfile1="$object.d"
-   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
-   if test "$libtool" = yes; then
-      "$@" -Wc,-MD
-   else
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
-      exit $stat
-   fi
-
-   if test -f "$tmpdepfile1"; then
-      tmpdepfile="$tmpdepfile1"
-   else
-      tmpdepfile="$tmpdepfile2"
-   fi
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
-      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  test -z "$dashmflag" && dashmflag=-M
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*) # this is libtool, let us make it quiet
-      for arg
-      do # cycle over the arguments
-        case "$arg" in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  # X makedepend
-  (
-    shift
-    cleared=no
-    for arg in "$@"; do
-      case $cleared in no)
-        set ""; shift
-	cleared=yes
-      esac
-      case "$arg" in
-        -D*|-I*)
-	  set fnord "$@" "$arg"; shift;;
-	-*)
-	  ;;
-	*)
-	  set fnord "$@" "$arg"; shift;;
-      esac
-    done
-    obj_suffix="`echo $object | sed 's/^.*\././'`"
-    touch "$tmpdepfile"
-    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tail +3 "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  ( IFS=" "
-    case " $* " in
-    *" --mode=compile "*)
-      for arg
-      do # cycle over the arguments
-        case $arg in
-	"--mode=compile")
-	  # insert --quiet before "--mode=compile"
-	  set fnord "$@" --quiet
-	  shift # fnord
-	  ;;
-	esac
-	set fnord "$@" "$arg"
-	shift # fnord
-	shift # "$arg"
-      done
-      ;;
-    esac
-    "$@" -E |
-    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  ) &
-  proc=$!
-  "$@"
-  stat=$?
-  wait "$proc"
-  if test "$stat" != 0; then exit $stat; fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0