Use bison instead of bison++

The += operator should also take the environment variables into account
Solved problem when & in redirect operator on command line
Solved syntax error when SPACE was follewed by SPACE
Removed kdevelop3 project files
Enable debug info in debug build on linux
Added support for foreach function
Fixed dependency problem for implicit rules with extra dependencies
Increased gnu make compatibility: allow implicit rules without commands
Solved wrong error message when it cannot build a target in mhmake_dbg
On windows: when checking the extension of a command: make sure a / does not cause a wrong decision
Added safety against recursive implicit rules.
Fixed wrong check on failure to open makefiles.
Make sure no message is printed when -include is used
flex and bison generated files: make sure the #line statements have the correct line numbers for the debugger after having added one line in the beginning of the file after running the flex/bison.
Make sure that the variable defined just before an error or message/info macro is defined when the message is generated.
mhmake_dbg: print error message when a target cannot be build because the directory of the target does not exist (and no rule is defined for it)
Reformatted message/info macro output
Also print makefile and line number when using error and message macro
Solved crash in mhmake_dbg when -C is specified on the command line
Solved problem in macro expansion when 2 patsubst inside each other
addprefix should not give an error when done on an empty string
Use comspec when echo is followed by a pipe character (piping is not supported by the echo internal command of mhmake)
Solved possible stack curruption (there was little chance that this was occuring)

1 files changed, 0 insertions, 336 deletions

diff --git a/tools/mhmake/missing b/tools/mhmake/missing
deleted file mode 100644
index 6a37006e8..000000000
--- a/tools/mhmake/missing
+++ /dev/null
@@ -1,336 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0