Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

4 files changed, 1504 insertions, 0 deletions

diff --git a/xorg-server/doc/Makefile.am b/xorg-server/doc/Makefile.am
new file mode 100644
index 000000000..d3911c9bf
--- /dev/null
+++ b/xorg-server/doc/Makefile.am
@@ -0,0 +1,35 @@
+appmandir = $(APP_MAN_DIR)
+filemandir = $(FILE_MAN_DIR)
+
+# Xserver.man covers options generic to all X servers built in this tree
+# (i.e. those handled in the os/utils.c options processing instead of in
+#  the DDX-level options processing)
+appman_PRE = Xserver.man.pre
+fileman_PRE =
+
+appman_PROCESSED = $(appman_PRE:man.pre=man)
+fileman_PROCESSED = $(fileman_PRE:man.pre=man)
+
+appman_DATA = $(appman_PRE:man.pre=@APP_MAN_SUFFIX@)
+fileman_DATA = $(fileman_PRE:man.pre=@FILE_MAN_SUFFIX@)
+
+BUILT_SOURCES = $(appman_PROCESSED) $(fileman_PROCESSED)
+
+CLEANFILES = $(appman_PROCESSED) $(appman_DATA) \
+		$(fileman_PROCESSED) $(fileman_DATA)
+
+include $(top_srcdir)/cpprules.in
+
+.man.$(APP_MAN_SUFFIX):
+	cp $< $@
+
+.man.$(FILE_MAN_SUFFIX):
+	cp $< $@
+
+EXTRAMANDEFS = -D__default_font_path__="`echo $(COMPILEDDEFAULTFONTPATH) | sed -e 's/,/, /g'`"
+
+# Docs about X server internals that we ship with source but don't install
+DEVEL_DOCS = smartsched
+
+
+EXTRA_DIST = $(DEVEL_DOCS) $(appman_PRE) $(fileman_PRE)
diff --git a/xorg-server/doc/Makefile.in b/xorg-server/doc/Makefile.in
new file mode 100644
index 000000000..34e300895
--- /dev/null
+++ b/xorg-server/doc/Makefile.in
@@ -0,0 +1,659 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#							-*- Makefile -*-
+# Rules for generating files using the C pre-processor
+# (Replaces CppFileTarget from Imake)
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/cpprules.in
+subdir = doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
+	$(top_builddir)/include/xorg-server.h \
+	$(top_builddir)/include/dix-config.h \
+	$(top_builddir)/include/xgl-config.h \
+	$(top_builddir)/include/xorg-config.h \
+	$(top_builddir)/include/xkb-config.h \
+	$(top_builddir)/include/xwin-config.h \
+	$(top_builddir)/include/kdrive-config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(filemandir)"
+appmanDATA_INSTALL = $(INSTALL_DATA)
+filemanDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(appman_DATA) $(fileman_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+APPDEFAULTDIR = @APPDEFAULTDIR@
+APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASE_FONT_PATH = @BASE_FONT_PATH@
+BUILD_DATE = @BUILD_DATE@
+BUILD_TIME = @BUILD_TIME@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DARWIN_LIBS = @DARWIN_LIBS@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFAULT_LIBRARY_PATH = @DEFAULT_LIBRARY_PATH@
+DEFAULT_LOGPREFIX = @DEFAULT_LOGPREFIX@
+DEFAULT_MODULE_PATH = @DEFAULT_MODULE_PATH@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DGA_CFLAGS = @DGA_CFLAGS@
+DGA_LIBS = @DGA_LIBS@
+DIX_CFLAGS = @DIX_CFLAGS@
+DLLTOOL = @DLLTOOL@
+DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
+DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
+DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
+DMXMODULES_LIBS = @DMXMODULES_LIBS@
+DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@
+DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@
+DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@
+DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@
+DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
+DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
+DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@
+DRIPROTO_LIBS = @DRIPROTO_LIBS@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
+DRI_DRIVER_PATH = @DRI_DRIVER_PATH@
+DSYMUTIL = @DSYMUTIL@
+DTRACE = @DTRACE@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
+FREETYPE_LIBS = @FREETYPE_LIBS@
+GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
+GLX_DEFINES = @GLX_DEFINES@
+GL_CFLAGS = @GL_CFLAGS@
+GL_LIBS = @GL_LIBS@
+GREP = @GREP@
+HAL_CFLAGS = @HAL_CFLAGS@
+HAL_LIBS = @HAL_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KDRIVE_CFLAGS = @KDRIVE_CFLAGS@
+KDRIVE_INCS = @KDRIVE_INCS@
+KDRIVE_LIBS = @KDRIVE_LIBS@
+KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@
+KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@
+KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@
+LAUNCHD = @LAUNCHD@
+LDFLAGS = @LDFLAGS@
+LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
+LIBDRM_LIBS = @LIBDRM_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
+LINUXDOC = @LINUXDOC@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKE_HTML = @MAKE_HTML@
+MAKE_PDF = @MAKE_PDF@
+MAKE_PS = @MAKE_PS@
+MAKE_TEXT = @MAKE_TEXT@
+MESA_SOURCE = @MESA_SOURCE@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
+MKFONTDIR = @MKFONTDIR@
+MKFONTSCALE = @MKFONTSCALE@
+NMEDIT = @NMEDIT@
+OBJC = @OBJC@
+OBJCCLD = @OBJCCLD@
+OBJCDEPMODE = @OBJCDEPMODE@
+OBJCFLAGS = @OBJCFLAGS@
+OBJCLINK = @OBJCLINK@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
+PCIACCESS_LIBS = @PCIACCESS_LIBS@
+PCI_TXT_IDS_PATH = @PCI_TXT_IDS_PATH@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PROJECTROOT = @PROJECTROOT@
+PS2PDF = @PS2PDF@
+RANLIB = @RANLIB@
+RAWCPP = @RAWCPP@
+RAWCPPFLAGS = @RAWCPPFLAGS@
+SED = sed
+SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
+SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
+STRIP = @STRIP@
+TSLIB_CFLAGS = @TSLIB_CFLAGS@
+TSLIB_LIBS = @TSLIB_LIBS@
+UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
+VENDOR_MAN_VERSION = @VENDOR_MAN_VERSION@
+VENDOR_NAME = @VENDOR_NAME@
+VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
+VENDOR_RELEASE = @VENDOR_RELEASE@
+VERSION = @VERSION@
+X11APP_ARCHS = @X11APP_ARCHS@
+X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@
+X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@
+XDMCP_CFLAGS = @XDMCP_CFLAGS@
+XDMCP_LIBS = @XDMCP_LIBS@
+XDMXCONFIG_DEP_CFLAGS = @XDMXCONFIG_DEP_CFLAGS@
+XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@
+XDMX_CFLAGS = @XDMX_CFLAGS@
+XDMX_LIBS = @XDMX_LIBS@
+XDMX_SYS_LIBS = @XDMX_SYS_LIBS@
+XEGLMODULES_CFLAGS = @XEGLMODULES_CFLAGS@
+XEGL_LIBS = @XEGL_LIBS@
+XEGL_SYS_LIBS = @XEGL_SYS_LIBS@
+XEPHYR_CFLAGS = @XEPHYR_CFLAGS@
+XEPHYR_DRI_LIBS = @XEPHYR_DRI_LIBS@
+XEPHYR_INCS = @XEPHYR_INCS@
+XEPHYR_LIBS = @XEPHYR_LIBS@
+XF86CONFIGFILE = @XF86CONFIGFILE@
+XF86MISC_CFLAGS = @XF86MISC_CFLAGS@
+XF86MISC_LIBS = @XF86MISC_LIBS@
+XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@
+XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@
+XGLMODULES_CFLAGS = @XGLMODULES_CFLAGS@
+XGLMODULES_LIBS = @XGLMODULES_LIBS@
+XGLXMODULES_CFLAGS = @XGLXMODULES_CFLAGS@
+XGLXMODULES_LIBS = @XGLXMODULES_LIBS@
+XGLX_LIBS = @XGLX_LIBS@
+XGLX_SYS_LIBS = @XGLX_SYS_LIBS@
+XGL_LIBS = @XGL_LIBS@
+XGL_MODULE_PATH = @XGL_MODULE_PATH@
+XGL_SYS_LIBS = @XGL_SYS_LIBS@
+XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@
+XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@
+XKB_COMPILED_DIR = @XKB_COMPILED_DIR@
+XKM_OUTPUT_DIR = @XKM_OUTPUT_DIR@
+XLIB_CFLAGS = @XLIB_CFLAGS@
+XLIB_LIBS = @XLIB_LIBS@
+XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@
+XNESTMODULES_LIBS = @XNESTMODULES_LIBS@
+XNEST_LIBS = @XNEST_LIBS@
+XNEST_SYS_LIBS = @XNEST_SYS_LIBS@
+XORGCFG_DEP_CFLAGS = @XORGCFG_DEP_CFLAGS@
+XORGCFG_DEP_LIBS = @XORGCFG_DEP_LIBS@
+XORGCONFIG_DEP_CFLAGS = @XORGCONFIG_DEP_CFLAGS@
+XORGCONFIG_DEP_LIBS = @XORGCONFIG_DEP_LIBS@
+XORG_CFLAGS = @XORG_CFLAGS@
+XORG_INCS = @XORG_INCS@
+XORG_LIBS = @XORG_LIBS@
+XORG_MODULES_CFLAGS = @XORG_MODULES_CFLAGS@
+XORG_MODULES_LIBS = @XORG_MODULES_LIBS@
+XORG_OS = @XORG_OS@
+XORG_OS_SUBDIR = @XORG_OS_SUBDIR@
+XORG_SYS_LIBS = @XORG_SYS_LIBS@
+XPRINTMODULES_CFLAGS = @XPRINTMODULES_CFLAGS@
+XPRINTMODULES_LIBS = @XPRINTMODULES_LIBS@
+XPRINTPROTO_CFLAGS = @XPRINTPROTO_CFLAGS@
+XPRINTPROTO_LIBS = @XPRINTPROTO_LIBS@
+XPRINT_CFLAGS = @XPRINT_CFLAGS@
+XPRINT_LIBS = @XPRINT_LIBS@
+XPRINT_SYS_LIBS = @XPRINT_SYS_LIBS@
+XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@
+XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@
+XSDL_INCS = @XSDL_INCS@
+XSDL_LIBS = @XSDL_LIBS@
+XSERVERCFLAGS_CFLAGS = @XSERVERCFLAGS_CFLAGS@
+XSERVERCFLAGS_LIBS = @XSERVERCFLAGS_LIBS@
+XSERVERLIBS_CFLAGS = @XSERVERLIBS_CFLAGS@
+XSERVERLIBS_LIBS = @XSERVERLIBS_LIBS@
+XSERVER_LIBS = @XSERVER_LIBS@
+XSERVER_SYS_LIBS = @XSERVER_SYS_LIBS@
+XTSTEXAMPLES_DEP_CFLAGS = @XTSTEXAMPLES_DEP_CFLAGS@
+XTSTEXAMPLES_DEP_LIBS = @XTSTEXAMPLES_DEP_LIBS@
+XVFB_LIBS = @XVFB_LIBS@
+XVFB_SYS_LIBS = @XVFB_SYS_LIBS@
+XWINMODULES_CFLAGS = @XWINMODULES_CFLAGS@
+XWINMODULES_LIBS = @XWINMODULES_LIBS@
+XWIN_LIBS = @XWIN_LIBS@
+XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
+XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+__XCONFIGFILE__ = @__XCONFIGFILE__@
+abi_ansic = @abi_ansic@
+abi_extension = @abi_extension@
+abi_font = @abi_font@
+abi_videodrv = @abi_videodrv@
+abi_xinput = @abi_xinput@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+driverdir = @driverdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+extdir = @extdir@
+ft_config = @ft_config@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+launchagentsdir = @launchagentsdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sdkdir = @sdkdir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xglmoduledir = @xglmoduledir@
+xpconfigdir = @xpconfigdir@
+appmandir = $(APP_MAN_DIR)
+filemandir = $(FILE_MAN_DIR)
+
+# Xserver.man covers options generic to all X servers built in this tree
+# (i.e. those handled in the os/utils.c options processing instead of in
+#  the DDX-level options processing)
+appman_PRE = Xserver.man.pre
+fileman_PRE = 
+appman_PROCESSED = $(appman_PRE:man.pre=man)
+fileman_PROCESSED = $(fileman_PRE:man.pre=man)
+appman_DATA = $(appman_PRE:man.pre=@APP_MAN_SUFFIX@)
+fileman_DATA = $(fileman_PRE:man.pre=@FILE_MAN_SUFFIX@)
+BUILT_SOURCES = $(appman_PROCESSED) $(fileman_PROCESSED)
+CLEANFILES = $(appman_PROCESSED) $(appman_DATA) \
+		$(fileman_PROCESSED) $(fileman_DATA)
+
+SUFFIXES = .pre .man .man.pre
+
+# Translate XCOMM into pound sign with sed, rather than passing -DXCOMM=XCOMM
+# to cpp, because that trick does not work on all ANSI C preprocessors.
+# Delete line numbers from the cpp output (-P is not portable, I guess).
+# Allow XCOMM to be preceded by whitespace and provide a means of generating
+# output lines with trailing backslashes.
+# Allow XHASH to always be substituted, even in cases where XCOMM isn't.
+CPP_SED_MAGIC = $(SED) -e '/^\#  *[0-9][0-9]*  *.*$$/d' \
+                       -e '/^\#line  *[0-9][0-9]*  *.*$$/d' \
+                       -e '/^[         ]*XCOMM$$/s/XCOMM/\#/' \
+                       -e '/^[         ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/\#/' \
+                       -e '/^[         ]*XHASH/s/XHASH/\#/' \
+                       -e '/\@\@$$/s/\@\@$$/\\/'
+
+
+# Strings to replace in man pages
+XORGRELSTRING = @PACKAGE_STRING@
+XORGMANNAME = X Version 11
+XSERVERNAME = Xorg
+MANDEFS = \
+        -D__vendorversion__="\"$(XORGRELSTRING)\" \"$(XORGMANNAME)\"" \
+        -D__xorgversion__="\"$(XORGRELSTRING)\" \"$(XORGMANNAME)\"" \
+	-D__appmansuffix__=$(APP_MAN_SUFFIX) \
+	-D__filemansuffix__=$(FILE_MAN_SUFFIX) \
+	-D__libmansuffix__=$(LIB_MAN_SUFFIX) \
+	-D__miscmansuffix__=$(MISC_MAN_SUFFIX) \
+	-D__drivermansuffix__=$(DRIVER_MAN_SUFFIX) \
+	-D__adminmansuffix__=$(ADMIN_MAN_SUFFIX) \
+	-D__mandir__=$(mandir) \
+	-D__projectroot__=$(prefix) \
+	-D__xconfigfile__=$(__XCONFIGFILE__) -D__xconfigdir__=$(XCONFIGDIR) \
+	-D__xlogfile__=$(XLOGFILE) -D__xservername__=$(XSERVERNAME) 
+
+EXTRAMANDEFS = -D__default_font_path__="`echo $(COMPILEDDEFAULTFONTPATH) | sed -e 's/,/, /g'`"
+
+# Docs about X server internals that we ship with source but don't install
+DEVEL_DOCS = smartsched
+EXTRA_DIST = $(DEVEL_DOCS) $(appman_PRE) $(fileman_PRE)
+all: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .pre .man .man.pre .$(APP_MAN_SUFFIX) .$(FILE_MAN_SUFFIX)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/cpprules.in $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-appmanDATA: $(appman_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
+	@list='$(appman_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
+	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	done
+
+uninstall-appmanDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(appman_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
+	done
+install-filemanDATA: $(fileman_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(filemandir)" || $(MKDIR_P) "$(DESTDIR)$(filemandir)"
+	@list='$(fileman_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(filemanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(filemandir)/$$f'"; \
+	  $(filemanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(filemandir)/$$f"; \
+	done
+
+uninstall-filemanDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(fileman_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(filemandir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(filemandir)/$$f"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(filemandir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-appmanDATA install-filemanDATA
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-appmanDATA uninstall-filemanDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-appmanDATA install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am \
+	install-filemanDATA install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-appmanDATA uninstall-filemanDATA
+
+
+.pre:
+	$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $< | $(CPP_SED_MAGIC) > $@
+
+.man.pre.man:
+	$(RAWCPP) $(RAWCPPFLAGS) $(MANDEFS) $(EXTRAMANDEFS) < $< | $(CPP_SED_MAGIC) > $@
+
+.man.$(APP_MAN_SUFFIX):
+	cp $< $@
+
+.man.$(FILE_MAN_SUFFIX):
+	cp $< $@
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/xorg-server/doc/Xserver.man.pre b/xorg-server/doc/Xserver.man.pre
new file mode 100644
index 000000000..8fe3b76a2
--- /dev/null
+++ b/xorg-server/doc/Xserver.man.pre
@@ -0,0 +1,606 @@
+.\" $Xorg: Xserver.man,v 1.4 2001/02/09 02:04:07 xorgcvs Exp $
+.\" $XdotOrg: xserver/xorg/doc/Xserver.man.pre,v 1.4 2005/12/23 20:11:12 alanc Exp $
+.\" Copyright 1984 - 1991, 1993, 1994, 1998  The Open Group
+.\"
+.\" Permission to use, copy, modify, distribute, and sell this software and its
+.\" documentation for any purpose is hereby granted without fee, provided that
+.\" the above copyright notice appear in all copies and that both that
+.\" copyright notice and this permission notice appear in supporting
+.\" documentation.
+.\"
+.\" The above copyright notice and this permission notice shall be included
+.\" in all copies or substantial portions of the Software.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+.\" OTHER DEALINGS IN THE SOFTWARE.
+.\"
+.\" Except as contained in this notice, the name of The Open Group shall
+.\" not be used in advertising or otherwise to promote the sale, use or
+.\" other dealings in this Software without prior written authorization
+.\" from The Open Group.
+.\" $XFree86: xc/programs/Xserver/Xserver.man,v 3.31 2004/01/10 22:27:46 dawes Exp $
+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH XSERVER 1 __xorgversion__
+.SH NAME
+Xserver \- X Window System display server
+.SH SYNOPSIS
+.B X
+[option ...]
+.SH DESCRIPTION
+.I X
+is the generic name for the X Window System display server.  It is
+frequently a link or a copy of the appropriate server binary for
+driving the most frequently used server on a given machine.
+.SH "STARTING THE SERVER"
+The X server is usually started from the X Display Manager program 
+\fIxdm\fP(1) or a similar display manager program.
+This utility is run from the system boot files and takes care of keeping
+the server running, prompting for usernames and passwords, and starting up
+the user sessions.
+.PP
+Installations that run more than one window system may need to use the
+\fIxinit\fP(1) utility instead of a display manager.  However, \fIxinit\fP is
+to be considered a tool for building startup scripts and is not
+intended for use by end users.  Site administrators are \fBstrongly\fP
+urged to use a display manager, or build other interfaces for novice users.
+.PP
+The X server may also be started directly by the user, though this
+method is usually reserved for testing and is not recommended for
+normal operation.  On some platforms, the user must have special
+permission to start the X server, often because access to certain
+devices (e.g. \fI/dev/mouse\fP) is restricted.
+.PP
+When the X server starts up, it typically takes over the display.  If
+you are running on a workstation whose console is the display, you may
+not be able to log into the console while the server is running.
+.SH OPTIONS
+Many X servers have device-specific command line options.  See the manual
+pages for the individual servers for more details; a list of
+server-specific manual pages is provided in the SEE ALSO section below.
+.PP
+All of the X servers accept the command line options described below.
+Some X servers may have alternative ways of providing the parameters
+described here, but the values provided via the command line options
+should override values specified via other mechanisms.
+.TP 8
+.B :\fIdisplaynumber\fP
+The X server runs as the given \fIdisplaynumber\fP, which by default is 0.
+If multiple X servers are to run simultaneously on a host, each must have
+a unique display number.  See the DISPLAY
+NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
+specify which display number clients should try to use.
+.TP 8
+.B \-a \fInumber\fP
+sets pointer acceleration (i.e. the ratio of how much is reported to how much
+the user actually moved the pointer).
+.TP 8
+.B \-ac
+disables host-based access control mechanisms.  Enables access by any host,
+and permits any host to modify the access control list.
+Use with extreme caution.
+This option exists primarily for running test suites remotely.
+.TP 8
+.B \-audit \fIlevel\fP
+sets the audit trail level.  The default level is 1, meaning only connection
+rejections are reported.  Level 2 additionally reports all successful
+connections and disconnects.  Level 4 enables messages from the
+SECURITY extension, if present, including generation and revocation of
+authorizations and violations of the security policy.
+Level 0 turns off the audit trail.
+Audit lines are sent as standard error output.
+.TP 8
+.B \-auth \fIauthorization-file\fP
+specifies a file which contains a collection of authorization records used
+to authenticate access.  See also the \fIxdm\fP(1) and 
+\fIXsecurity\fP(__miscmansuffix__) manual pages.
+.TP 8
+.B \-bs
+disables backing store support on all screens.
+.TP 8
+.B \-br
+sets the default root window to solid black instead of the standard root weave
+pattern.
+.TP 8
+.B \-c
+turns off key-click.
+.TP 8
+.B c \fIvolume\fP
+sets key-click volume (allowable range: 0-100).
+.TP 8
+.B \-cc \fIclass\fP
+sets the visual class for the root window of color screens.
+The class numbers are as specified in the X protocol.
+Not obeyed by all servers.
+.TP 8
+.B \-co \fIfilename\fP
+sets name of RGB color database.  The default is
+.IR __projectroot__/share/X11/rgb .
+.ig
+.TP 8
+.B \-config \fIfilename\fP
+reads more options from the given file.  Options in the file may be separated
+by newlines if desired.  If a '#' character appears on a line, all characters
+between it and the next newline are ignored, providing a simple commenting
+facility.  The \fB\-config\fP option itself may appear in the file.
+.BR NOTE :
+This option is disabled when the Xserver is run with an effective uid
+different from the user's real uid.
+..
+.TP 8
+.B \-core
+causes the server to generate a core dump on fatal errors.
+.TP 8
+.B \-deferglyphs \fIwhichfonts\fP
+specifies the types of fonts for which the server should attempt to use
+deferred glyph loading.  \fIwhichfonts\fP can be all (all fonts),
+none (no fonts), or 16 (16 bit fonts only).
+.TP 8
+.B \-dpi \fIresolution\fP
+sets the resolution for all screens, in dots per inch.
+To be used when the server cannot determine the screen size(s) from the
+hardware.
+.TP 8
+.B dpms
+enables DPMS (display power management services), where supported.  The
+default state is platform and configuration specific.
+.TP 8
+.B \-dpms
+disables DPMS (display power management services).  The default state
+is platform and configuration specific.
+.TP 8
+.BI \-extension extensionName
+disables named extension.   If an unknown extension name is specified,
+a list of accepted extension names is printed.
+.TP 8
+.BI \+extension extensionName
+enables named extension.   If an unknown extension name is specified,
+a list of accepted extension names is printed.
+.TP 8
+.B \-f \fIvolume\fP
+sets feep (bell) volume (allowable range: 0-100).
+.TP 8
+.B \-fc \fIcursorFont\fP
+sets default cursor font.
+.TP 8
+.B \-fn \fIfont\fP
+sets the default font.
+.TP 8
+.B \-fp \fIfontPath\fP
+sets the search path for fonts.  This path is a comma separated list
+of directories which the X server searches for font databases.
+See the FONTS section of this manual page for more information and the default
+list.
+.TP 8
+.B \-help
+prints a usage message.
+.TP 8
+.B \-I
+causes all remaining command line arguments to be ignored.
+.TP 8
+.B \-maxbigreqsize \fIsize\fP
+sets the maximum big request to
+.I size
+MB.
+.TP 8
+.B \-nolisten \fItrans-type\fP
+disables a transport type.  For example, TCP/IP connections can be disabled
+with
+.BR "\-nolisten tcp" .
+This option may be issued multiple times to disable listening to different
+transport types.
+.TP 8
+.B \-noreset
+prevents a server reset when the last client connection is closed.  This
+overrides a previous
+.B \-terminate
+command line option.
+.TP 8
+.B \-p \fIminutes\fP
+sets screen-saver pattern cycle time in minutes.
+.TP 8
+.B \-pn
+permits the server to continue running if it fails to establish all of
+its well-known sockets (connection points for clients), but
+establishes at least one.  This option is set by default.
+.TP 8
+.B \-nopn
+causes the server to exit if it fails to establish all of its well-known
+sockets (connection points for clients).
+.TP 8
+.B \-r
+turns off auto-repeat.
+.TP 8
+.B r
+turns on auto-repeat.
+.TP 8
+.B \-s \fIminutes\fP
+sets screen-saver timeout time in minutes.
+.TP 8
+.B \-su
+disables save under support on all screens.
+.TP 8
+.B \-t \fInumber\fP
+sets pointer acceleration threshold in pixels (i.e. after how many pixels
+pointer acceleration should take effect).
+.TP 8
+.B \-terminate
+causes the server to terminate at server reset, instead of continuing to run.
+This overrides a previous
+.B \-noreset
+command line option.
+.TP 8
+.B \-to \fIseconds\fP
+sets default connection timeout in seconds.
+.TP 8
+.B \-tst
+disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1, RECORD).
+.TP 8
+.B tty\fIxx\fP
+ignored, for servers started the ancient way (from init).
+.TP 8
+.B v
+sets video-off screen-saver preference.
+.TP 8
+.B \-v
+sets video-on screen-saver preference.
+.TP 8
+.B \-wm
+forces the default backing-store of all windows to be WhenMapped.  This
+is a backdoor way of getting backing-store to apply to all windows.
+Although all mapped windows will have backing store, the backing store
+attribute value reported by the server for a window will be the last
+value established by a client.  If it has never been set by a client,
+the server will report the default value, NotUseful.  This behavior is
+required by the X protocol, which allows the server to exceed the
+client's backing store expectations but does not provide a way to tell
+the client that it is doing so.
+.TP 8
+.B \-wr
+sets the default root window to solid white instead of the standard root weave
+pattern.
+.TP 8
+.B \-x \fIextension\fP
+loads the specified extension at init.
+This is a no-op for most implementations.
+.TP 8
+.B [+-]xinerama
+enables(+) or disables(-) the XINERAMA extension.  The default state is
+platform and configuration specific.
+.SH SERVER DEPENDENT OPTIONS
+Some X servers accept the following options:
+.TP 8
+.B \-ld \fIkilobytes\fP
+sets the data space limit of the server to the specified number of kilobytes.
+A value of zero makes the data size as large as possible.  The default value
+of \-1 leaves the data space limit unchanged.
+.TP 8
+.B \-lf \fIfiles\fP
+sets the number-of-open-files limit of the server to the specified number.
+A value of zero makes the limit as large as possible.  The default value
+of \-1 leaves the limit unchanged.
+.TP 8
+.B \-ls \fIkilobytes\fP
+sets the stack space limit of the server to the specified number of kilobytes.
+A value of zero makes the stack size as large as possible.  The default value
+of \-1 leaves the stack space limit unchanged.
+.TP 8
+.B \-logo
+turns on the X Window System logo display in the screen-saver.
+There is currently no way to change this from a client.
+.TP 8
+.B nologo
+turns off the X Window System logo display in the screen-saver.
+There is currently no way to change this from a client.
+.TP 8
+.B \-render 
+.BR default | mono | gray | color
+sets the color allocation policy that will be used by the render extension.
+.RS 8
+.TP 8
+.I default
+selects the default policy defined for the display depth of the X
+server. 
+.TP 8
+.I mono
+don't use any color cell. 
+.TP 8
+.I gray 
+use a gray map of 13 color cells for the X render extension.
+.TP 8
+.I color
+use a color cube of at most 4*4*4 colors (that is 64 color cells).
+.RE
+.TP 8
+.B \-dumbSched
+disables smart scheduling on platforms that support the smart scheduler.
+.TP
+.B \-schedInterval \fIinterval\fP
+sets the smart scheduler's scheduling interval to
+.I interval
+milliseconds.
+.SH XDMCP OPTIONS
+X servers that support XDMCP have the following options.
+See the \fIX Display Manager Control Protocol\fP specification for more
+information.
+.TP 8
+.B \-query \fIhostname\fP
+enables XDMCP and sends Query packets to the specified
+.IR hostname .
+.TP 8
+.B \-broadcast
+enable XDMCP and broadcasts BroadcastQuery packets to the network.  The
+first responding display manager will be chosen for the session.
+.TP 8
+.B \-multicast [\fIaddress\fP [\fIhop count\fP]]
+Enable XDMCP and multicast BroadcastQuery packets to the  network.   
+The first responding display manager is chosen for the session.  If an 
+address is specified, the multicast is sent to that address.  If no 
+address is specified, the multicast is sent to the default XDMCP IPv6 
+multicast group.  If a hop count is specified, it is used as the maximum 
+hop count for the multicast.  If no hop count is specified, the multicast 
+is set to a maximum of 1 hop, to prevent the multicast from being routed 
+beyond the local network.
+.TP 8
+.B \-indirect \fIhostname\fP
+enables XDMCP and send IndirectQuery packets to the specified
+.IR hostname .
+.TP 8
+.B \-port \fIport-number\fP
+uses the specified \fIport-number\fP for XDMCP packets, instead of the
+default.  This option must be specified before any \-query, \-broadcast,
+\-multicast, or \-indirect options.
+.TP 8
+.B \-from \fIlocal-address\fP
+specifies the local address to connect from (useful if the connecting host
+has multiple network interfaces).  The \fIlocal-address\fP may be expressed
+in any form acceptable to the host platform's \fIgethostbyname\fP(3)
+implementation.
+.TP 8
+.B \-once
+causes the server to terminate (rather than reset) when the XDMCP session
+ends.
+.TP 8
+.B \-class \fIdisplay-class\fP
+XDMCP has an additional display qualifier used in resource lookup for
+display-specific options.  This option sets that value, by default it
+is "MIT-Unspecified" (not a very useful value).
+.TP 8
+.B \-cookie \fIxdm-auth-bits\fP
+When testing XDM-AUTHENTICATION-1, a private key is shared between the
+server and the manager.  This option sets the value of that private
+data (not that it is very private, being on the command line!).
+.TP 8
+.B \-displayID \fIdisplay-id\fP
+Yet another XDMCP specific value, this one allows the display manager to
+identify each display so that it can locate the shared key.
+.SH XKEYBOARD OPTIONS
+X servers that support the XKEYBOARD (a.k.a. \*qXKB\*q) extension accept the
+following options.  All layout files specified on the command line must be 
+located in the XKB base directory or a subdirectory, and specified as the
+relative path from the XKB base directory.  The default XKB base directory is
+.IR __projectroot__/lib/X11/xkb .
+.TP 8
+.B [+-]kb
+enables(+) or disables(-) the XKEYBOARD extension.
+.TP 8
+.BR [+-]accessx " [ \fItimeout\fP [ \fItimeout_mask\fP [ \fIfeedback\fP [ \fIoptions_mask\fP ] ] ] ]"
+enables(+) or disables(-) AccessX key sequences.
+.TP 8
+.B \-xkbdir \fIdirectory\fP
+base directory for keyboard layout files.  This option is not available
+for setuid X servers (i.e., when the X server's real and effective uids
+are different).
+.TP 8
+.B \-ardelay \fImilliseconds\fP
+sets the autorepeat delay (length of time in milliseconds that a key must
+be depressed before autorepeat starts).
+.TP 8
+.B \-arinterval \fImilliseconds\fP
+sets the autorepeat interval (length of time in milliseconds that should
+elapse between autorepeat-generated keystrokes).
+.TP 8
+.B \-xkbmap \fIfilename\fP
+loads keyboard description in \fIfilename\fP on server startup.
+.SH "NETWORK CONNECTIONS"
+The X server supports client connections via a platform-dependent subset of
+the following transport types: TCP\/IP, Unix Domain sockets, DECnet,
+and several varieties of SVR4 local connections.  See the DISPLAY
+NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to
+specify which transport type clients should try to use.
+.SH GRANTING ACCESS
+The X server implements a platform-dependent subset of the following
+authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1,
+XDM-AUTHORIZATION-2, SUN-DES-1, and MIT-KERBEROS-5.  See the 
+\fIXsecurity\fP(__miscmansuffix__) manual page for information on the 
+operation of these protocols.
+.PP
+Authorization data required by the above protocols is passed to the
+server in a private file named with the \fB\-auth\fP command line
+option.  Each time the server is about to accept the first connection
+after a reset (or when the server is starting), it reads this file.
+If this file contains any authorization records, the local host is not
+automatically allowed access to the server, and only clients which
+send one of the authorization records contained in the file in the
+connection setup information will be allowed access.  See the
+\fIXau\fP manual page for a description of the binary format of this
+file.  See \fIxauth\fP(1) for maintenance of this file, and distribution
+of its contents to remote hosts.
+.PP
+The X server also uses a host-based access control list for deciding
+whether or not to accept connections from clients on a particular machine.
+If no other authorization mechanism is being used,
+this list initially consists of the host on which the server is running as
+well as any machines listed in the file \fI/etc/X\fBn\fI.hosts\fR, where
+\fBn\fP is the display number of the server.  Each line of the file should
+contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet
+hostname in double colon format (e.g. hydra::) or a complete name in the format
+\fIfamily\fP:\fIname\fP as described in the \fIxhost\fP(1) manual page.
+There should be no leading or trailing spaces on any lines.  For example:
+.sp
+.in +8
+.nf
+joesworkstation
+corporate.company.com
+star::
+inet:bigcpu
+local:
+.fi
+.in -8
+.PP
+Users can add or remove hosts from this list and enable or disable access
+control using the \fIxhost\fP command from the same machine as the server.
+.PP
+If the X FireWall Proxy (\fIxfwp\fP) is being used without a sitepolicy,
+host-based authorization must be turned on for clients to be able to
+connect to the X server via the \fIxfwp\fP.  If \fIxfwp\fP is run without
+a configuration file and thus no sitepolicy is defined, if \fIxfwp\fP
+is using an X server where xhost + has been run to turn off host-based
+authorization checks, when a client tries to connect to this X server
+via \fIxfwp\fP, the X server will deny the connection.  See \fIxfwp\fP(1)
+for more information about this proxy.
+.PP
+The X protocol intrinsically does not have any notion of window operation
+permissions or place any restrictions on what a client can do; if a program can
+connect to a display, it has full run of the screen.
+X servers that support the SECURITY extension fare better because clients
+can be designated untrusted via the authorization they use to connect; see
+the \fIxauth\fP(1) manual page for details.  Restrictions are imposed
+on untrusted clients that curtail the mischief they can do.  See the SECURITY
+extension specification for a complete list of these restrictions.
+.PP
+Sites that have better
+authentication and authorization systems might wish to make
+use of the hooks in the libraries and the server to provide additional
+security models.
+.SH SIGNALS
+The X server attaches special meaning to the following signals:
+.TP 8
+.I SIGHUP
+This signal causes the server to close all existing connections, free all
+resources, and restore all defaults.  It is sent by the display manager
+whenever the main user's main application (usually an \fIxterm\fP or window
+manager) exits to force the server to clean up and prepare for the next
+user.
+.TP 8
+.I SIGTERM
+This signal causes the server to exit cleanly.
+.TP 8
+.I SIGUSR1
+This signal is used quite differently from either of the above.  When the
+server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN
+instead of the usual SIG_DFL.  In this case, the server sends a SIGUSR1 to
+its parent process after it has set up the various connection schemes.
+\fIXdm\fP uses this feature to recognize when connecting to the server
+is possible.
+.SH FONTS
+The X server can obtain fonts from directories and/or from font servers.
+The list of directories and font servers
+the X server uses when trying to open a font is controlled
+by the \fIfont path\fP.  
+.LP
+The default font path is
+__default_font_path__ .
+.LP
+A special kind of directory can be specified using the \fBcatalogue\fP:
+prefix. Directories specified this way can contain symlinks pointing to the
+real font directories. See the FONTPATH.D section for details.
+.LP
+The font path can be set with the \fB\-fp\fP option or by \fIxset\fP(1)
+after the server has started.
+.SH "FONTPATH.D"
+You can specify a special kind of font path in the form \fBcatalogue:<dir>\fR.
+The directory specified after the catalogue: prefix will be scanned for symlinks
+and each symlink destination will be added as a local fontfile FPE.
+.PP
+The symlink can be suffixed by attributes such as '\fBunscaled\fR', which
+will be passed through to the underlying fontfile FPE. The only exception is
+the newly introduced '\fBpri\fR' attribute, which will be used for ordering
+the font paths specified by the symlinks.
+
+An example configuration:
+
+.nf
+    75dpi:unscaled:pri=20 \-> /usr/share/X11/fonts/75dpi
+    ghostscript:pri=60 \-> /usr/share/fonts/default/ghostscript
+    misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc
+    type1:pri=40 \-> /usr/share/X11/fonts/Type1
+    type1:pri=50 \-> /usr/share/fonts/default/Type1
+.fi
+
+This will add /usr/share/X11/fonts/misc as the first FPE with the attribute
+'unscaled', second FPE will be /usr/share/X11/fonts/75dpi, also with
+the attribute unscaled etc. This is functionally equivalent to setting
+the following font path:
+
+.nf
+    /usr/share/X11/fonts/misc:unscaled,
+    /usr/share/X11/fonts/75dpi:unscaled,
+    /usr/share/X11/fonts/Type1,
+    /usr/share/fonts/default/Type1,
+    /usr/share/fonts/default/ghostscript
+.fi
+
+.SH FILES
+.TP 30
+.I /etc/X\fBn\fP.hosts
+Initial access control list for display number \fBn\fP
+.TP 30
+.IR __projectroot__/lib/X11/fonts/misc , __projectroot__/lib/X11/fonts/75dpi , __projectroot__/lib/X11/fonts/100dpi
+Bitmap font directories
+.TP 30
+.IR __projectroot__/lib/X11/fonts/TTF , __projectroot__/lib/X11/fonts/Type1
+Outline font directories
+.TP 30
+.I __projectroot__/share/X11/rgb.txt
+Color database
+.TP 30
+.I /tmp/.X11-unix/X\fBn\fP
+Unix domain socket for display number \fBn\fP
+.TP 30
+.IR /tmp/rcX\fBn\fP
+Kerberos 5 replay cache for display number \fBn\fP
+.TP 30
+.I /usr/adm/X\fBn\fPmsgs
+Error log file for display number \fBn\fP if run from \fIinit\fP(__adminmansuffix__)
+.TP 30
+.I __projectroot__/lib/X11/xdm/xdm-errors
+Default error log file if the server is run from \fIxdm\fP(1)
+.SH "SEE ALSO"
+General information: \fIX\fP(__miscmansuffix__)
+.PP
+Protocols:
+.I "X Window System Protocol,"
+.I "The X Font Service Protocol,"
+.I "X Display Manager Control Protocol"
+.PP
+Fonts: \fIbdftopcf\fP(1), \fImkfontdir\fP(1), \fImkfontscale\fP(1),
+\fIxfs\fP(1), \fIxlsfonts\fP(1), \fIxfontsel\fP(1), \fIxfd\fP(1),
+.I "X Logical Font Description Conventions"
+.PP
+Security: \fIXsecurity\fP(__miscmansuffix__), \fIxauth\fP(1), \fIXau\fP(1), 
+\fIxdm\fP(1), \fIxhost\fP(1), \fIxfwp\fP(1),
+.I "Security Extension Specification"
+.PP
+Starting the server: \fIxdm\fP(1), \fIxinit\fP(1)
+.PP
+Controlling the server once started: \fIxset\fP(1), \fIxsetroot\fP(1),
+\fIxhost\fP(1)
+.PP
+Server-specific man pages:
+\fIXorg\fP(1), \fIXdmx\fP(1), \fIXnest\fP(1),
+\fIXvfb\fP(1), \fIXDarwin\fP(1), \fIXWin\fP(1).
+.PP
+Server internal documentation:
+.I "Definition of the Porting Layer for the X v11 Sample Server"
+.SH AUTHORS
+The sample server was originally written by Susan Angebranndt, Raymond
+Drewry, Philip Karlton, and Todd Newman, from Digital Equipment
+Corporation, with support from a large cast.  It has since been
+extensively rewritten by Keith Packard and Bob Scheifler, from MIT.
+Dave Wiggins took over post-R5 and made substantial improvements.
diff --git a/xorg-server/doc/smartsched b/xorg-server/doc/smartsched
new file mode 100644
index 000000000..057a759fd
--- /dev/null
+++ b/xorg-server/doc/smartsched
@@ -0,0 +1,204 @@
+			Client Scheduling in X
+			    Keith Packard
+			       SuSE
+			     10/28/99
+
+History:
+
+Since the original X server was written at Digital in 1987, the OS and DIX
+layers shared responsibility for scheduling the order to service
+client requests.  The original design was simplistic; under the maximum
+first make it work, then make it work well, this was a good idea.  Now 
+that we have a bit more experience with X applications, it's time to
+rethink the design.
+
+The basic dispatch loop in DIX looks like:
+
+	for (;;)
+	{
+		nready = WaitForSomething (...);
+		while (nready--)
+		{
+			isItTimeToYield = FALSE;
+			while (!isItTimeToYield)
+			{
+				if (!ReadRequestFromClient (...))
+					break;
+				(execute request);
+			}
+		}
+	}
+
+WaitForSomething looks like:
+
+	for (;;)
+		if (ANYSET (ClientsWithInput))
+			return popcount (ClientsWithInput);
+		select (...)
+		compute clientsReadable from select result;
+		return popcount (clientsReadable)
+	}
+
+ReadRequestFromClient looks like:
+
+	if (!fullRequestQueued)
+	{
+		read ();
+		if (!fullRequestQueued)
+		{
+			remove from ClientsWithInput;
+			timesThisConnection = 0;
+			return 0;
+		}
+	}
+	if (twoFullRequestsQueued)
+		add to ClientsWithInput;
+
+	if (++timesThisConnection >= 10)
+	{
+		isItTimeToYield = TRUE;
+		timesThisConnection = 0;
+	}
+	return 1;
+
+Here's what happens in this code:
+
+With a single client executing a stream of requests:
+
+	A client sends a packet of requests to the server.
+
+	WaitForSomething wakes up from select and returns that client
+	to Dispatch
+
+	Dispatch calls ReadRequestFromClient which reads a buffer (4K)
+	full of requests from the client
+
+	The server executes requests from this buffer until it emptys,
+	in two stages -- 10 requests at a time are executed in the
+	inner Dispatch loop, a buffer full of requests are executed
+	because WaitForSomething immediately returns if any clients
+	have complete requests pending in their input queues.
+
+	When the buffer finally emptys, the next call to ReadRequest
+	FromClient will return zero and Dispatch will go back to
+	WaitForSomething; now that the client has no requests pending,
+	WaitForSomething will block in select again.  If the client
+	is active, this select will immediately return that client
+	as ready to read.
+
+With multiple clients sending streams of requests, the sequence
+of operations is similar, except that ReadRequestFromClient will
+set isItTimeToYield after each 10 requests executed causing the
+server to round-robin among the clients with available requests.
+
+It's important to realize here that any complete requests which have been
+read from clients will be executed before the server will use select again
+to discover input from other clients.  A single busy client can easily
+monopolize the X server.
+
+So, the X server doesn't share well with clients which are more interactive
+in nature.
+
+The X server executes at most a buffer full of requests before again heading
+into select; ReadRequestFromClient causes the server to yield when the
+client request buffer doesn't contain a complete request.  When
+that buffer is executed quickly, the server spends a lot of time
+in select discovering that the same client again has input ready.  Thus
+the server also runs busy clients less efficiently than is would be
+possible.
+
+What to do.
+
+There are several things evident from the above discussion:
+
+ 1	The server has a poor metric for deciding how much work it
+	should do at one time on behalf of a particular client.
+
+ 2	The server doesn't call select often enough to detect less
+ 	aggressive clients in the face of busy clients, especially
+	when those clients are executing slow requests.
+
+ 3	The server calls select too often when executing fast requests.
+
+ 4	Some priority scheme is needed to keep interactive clients
+ 	responding to the user.
+
+And, there are some assumptions about how X applications work:
+
+ 1	Each X request is executed relatively quickly; a request-granularity
+ 	is good enough for interactive response almost all of the time.
+
+ 2	X applications receiving mouse/keyboard events are likely to
+ 	warrant additional attention from the X server.
+
+Instead of a request-count metric for work, a time-based metric should be
+used.  The server should select a reasonable time slice for each client
+and execute requests for the entire timeslice before yielding to
+another client.
+
+Instead of returning immediately from WaitForSomething if clients have
+complete requests queued, the server should go through select each
+time and gather as many ready clients as possible.  This involves
+polling instead of blocking and adding the ClientsWithInput to
+clientsReadable after the select returns.
+
+Instead of yielding when the request buffer is empty for a particular
+client, leave the yielding to the upper level scheduling and allow
+the server to try and read again from the socket.  If the client
+is busy, another buffer full of requests will already be waiting
+to be delivered thus avoiding the call through select and the
+additional overhead in WaitForSomething.
+
+Finally, the dispatch loop should not simply execute requests from the
+first available client, instead each client should be prioritized with
+busy clients penalized and clients receiving user events praised.
+
+How it's done:
+
+Polling the current time of day from the OS is too expensive to
+be done at each request boundary, so instead an interval timer is
+set allowing the server to track time changes by counting invocations
+of the related signal handler.  Instead of using the wall time for
+this purpose, the process CPU time is used instead.  This serves
+two purposes -- first, it allows the server to consume no CPU cycles
+when idle, second it avoids conflicts with SIGALRM usage in other
+parts of the server code.  It's not without problems though; other
+CPU intensive processes on the same machine can reduce interactive
+response time within the X server.  The dispatch loop can now
+calculate an approximate time value using the number of signals
+received.  The granularity of the timer sets the scheduling jitter,
+at 20ms it's only occasionally noticeable.
+
+The changes to WaitForSomething and ReadRequestFromClient are
+straightforward, adjusting when select is called and avoiding
+setting isItTimeToYield too often.
+
+The dispatch loop changes are more extensive, now instead of
+executing requests from all available clients, a single client
+is chosen after each call to WaitForSomething, requests are
+executed for that client and WaitForSomething is called again.
+
+Each client is assigned a priority, the dispatch loop chooses the
+client with the highest priority to execute.  Priorities are
+updated in three ways:
+
+ 1.	Clients which consume their entire slice are penalized
+ 	by having their priority reduced by one until they
+	reach some minimum value.
+
+ 2.	Clients which have executed no requests for some time
+ 	are praised by having their priority raised until they
+	return to normal priority.
+
+ 3.	Clients which receive user input are praised by having
+ 	their priority rased until they reach some maximal
+	value, above normal priority.
+
+The effect of these changes is to both improve interactive application
+response and benchmark numbers at the same time.
+
+
+
+
+
+$XFree86: $