Switched to xorg-server-1.6.99.900.tar.gz

1 files changed, 507 insertions, 0 deletions

diff --git a/xorg-server/hw/xfree86/ddc/ddc.c b/xorg-server/hw/xfree86/ddc/ddc.c
new file mode 100644
index 000000000..6fad9fbbc
--- /dev/null
+++ b/xorg-server/hw/xfree86/ddc/ddc.c
@@ -0,0 +1,507 @@
+/* xf86DDC.c 
+ * 
+ * Copyright 1998,1999 by Egbert Eich <Egbert.Eich@Physik.TU-Darmstadt.DE>
+ */
+
+/*
+ * A note on terminology.  DDC1 is the original dumb serial protocol, and
+ * can only do up to 128 bytes of EDID.  DDC2 is I2C-encapsulated and
+ * introduces extension blocks.  EDID is the old display identification
+ * block, DisplayID is the new one.
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "misc.h"
+#include "xf86.h"
+#include "xf86_OSproc.h"
+#include "xf86DDC.h"
+#include <string.h>
+
+#define RETRIES 4
+
+typedef enum {
+    DDCOPT_NODDC1,
+    DDCOPT_NODDC2,
+    DDCOPT_NODDC
+} DDCOpts;
+
+static const OptionInfoRec DDCOptions[] = {
+    { DDCOPT_NODDC1,	"NoDDC1",	OPTV_BOOLEAN,	{0},	FALSE },
+    { DDCOPT_NODDC2,	"NoDDC2",	OPTV_BOOLEAN,	{0},	FALSE },
+    { DDCOPT_NODDC,	"NoDDC",	OPTV_BOOLEAN,	{0},	FALSE },
+    { -1,		NULL,		OPTV_NONE,	{0},	FALSE },
+};
+
+/* DDC1 */
+
+static int
+find_start(unsigned int *ptr)
+{
+    unsigned int comp[9], test[9];
+    int i,j;
+  
+    for (i=0;i<9;i++){
+	comp[i] = *(ptr++);
+	test[i] = 1;
+    }
+    for (i=0;i<127;i++){
+	for (j=0;j<9;j++){
+	    test[j] = test[j] & !(comp[j] ^ *(ptr++));
+	}
+    }
+    for (i=0;i<9;i++)
+	if (test[i]) return (i+1);
+    return (-1);
+}
+
+static unsigned char *
+find_header(unsigned char *block)
+{
+    unsigned char *ptr, *head_ptr, *end;
+    unsigned char header[]={0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00};
+ 
+    ptr = block;
+    end = block + EDID1_LEN;
+    while (ptr<end) {
+	int i;
+	head_ptr = ptr;
+	for (i=0;i<8;i++){
+	    if (header[i] != *(head_ptr++)) break;
+	    if (head_ptr == end) head_ptr = block;
+	}
+	if (i==8) break;
+	ptr++; 
+    }
+    if (ptr == end) return (NULL);
+    return (ptr);
+}
+
+static unsigned char *
+resort(unsigned char *s_block)
+{
+    unsigned char *d_new, *d_ptr, *d_end, *s_ptr, *s_end;
+    unsigned char tmp;
+
+    s_end = s_block + EDID1_LEN;
+    d_new = xalloc(EDID1_LEN);
+    if (!d_new) return NULL;
+    d_end = d_new + EDID1_LEN;
+
+    s_ptr = find_header(s_block);
+    if (!s_ptr) return NULL;
+    for (d_ptr=d_new;d_ptr<d_end;d_ptr++){
+	tmp = *(s_ptr++);
+	*d_ptr = tmp; 
+	if (s_ptr == s_end) s_ptr = s_block;
+    }
+    xfree(s_block);
+    return (d_new);
+}
+
+static int
+DDC_checksum(unsigned char *block, int len)
+{
+    int i, result = 0;
+    int not_null = 0;
+    
+    for (i=0;i<len;i++) {
+	not_null |= block[i];
+	result += block[i];
+    }
+    
+#ifdef DEBUG
+    if (result & 0xFF) ErrorF("DDC checksum not correct\n");
+    if (!not_null) ErrorF("DDC read all Null\n");
+#endif
+
+    /* catch the trivial case where all bytes are 0 */
+    if (!not_null) return 1;
+
+    return (result&0xFF);
+}
+
+static unsigned char *
+GetEDID_DDC1(unsigned int *s_ptr)
+{
+    unsigned char *d_block, *d_pos;
+    unsigned int *s_pos, *s_end;
+    int s_start;
+    int i,j;
+    s_start = find_start(s_ptr);
+    if (s_start==-1) return NULL;
+    s_end = s_ptr + NUM;
+    s_pos = s_ptr + s_start;
+    d_block=xalloc(EDID1_LEN);
+    if (!d_block) return NULL;
+    d_pos = d_block;
+    for (i=0;i<EDID1_LEN;i++) {
+	for (j=0;j<8;j++) {
+	    *d_pos <<= 1;
+	    if (*s_pos) {
+		*d_pos |= 0x01;
+	    }
+	    s_pos++; if (s_pos == s_end) s_pos=s_ptr;
+	};
+	s_pos++; if (s_pos == s_end) s_pos=s_ptr;
+	d_pos++;
+    }
+    xfree(s_ptr);
+    if (d_block && DDC_checksum(d_block,EDID1_LEN)) return NULL;
+    return (resort(d_block));
+}
+
+/* fetch entire EDID record; DDC bit needs to be masked */
+static unsigned int * 
+FetchEDID_DDC1(register ScrnInfoPtr pScrn,
+	       register unsigned int (*read_DDC)(ScrnInfoPtr))
+{
+    int count = NUM;
+    unsigned int *ptr, *xp;
+
+    ptr=xp=xalloc(sizeof(int)*NUM); 
+
+    if (!ptr)  return NULL;
+    do {
+	/* wait for next retrace */
+	*xp = read_DDC(pScrn);
+	xp++;
+    } while(--count);
+    return (ptr);
+}
+
+/* test if DDC1  return 0 if not */
+static Bool
+TestDDC1(ScrnInfoPtr pScrn, unsigned int (*read_DDC)(ScrnInfoPtr))
+{
+    int old, count;
+
+    old = read_DDC(pScrn);
+    count = HEADER * BITS_PER_BYTE;
+    do {
+	/* wait for next retrace */
+	if (old != read_DDC(pScrn)) break;
+    } while(count--);
+    return (count);
+}
+
+/* 
+ * read EDID record , pass it to callback function to interpret.
+ * callback function will store it for further use by calling
+ * function; it will also decide if we need to reread it 
+ */
+static unsigned char *
+EDIDRead_DDC1(ScrnInfoPtr pScrn, DDC1SetSpeedProc DDCSpeed, 
+              unsigned int (*read_DDC)(ScrnInfoPtr))
+{
+    unsigned char *EDID_block = NULL;
+    int count = RETRIES;
+
+    if (!read_DDC) { 
+	xf86DrvMsg(pScrn->scrnIndex, X_PROBED, 
+		   "chipset doesn't support DDC1\n");
+	return NULL; 
+    };
+
+    if (TestDDC1(pScrn,read_DDC)==-1) { 
+	xf86DrvMsg(pScrn->scrnIndex, X_PROBED, "No DDC signal\n"); 
+	return NULL; 
+    };
+
+    if (DDCSpeed) DDCSpeed(pScrn,DDC_FAST);
+    do {
+	EDID_block = GetEDID_DDC1(FetchEDID_DDC1(pScrn,read_DDC)); 
+	count --;
+    } while (!EDID_block && count);
+    if (DDCSpeed) DDCSpeed(pScrn,DDC_SLOW);
+
+    return EDID_block;
+}
+
+/**
+ * Attempts to probe the monitor for EDID information, if NoDDC and NoDDC1 are
+ * unset.  EDID information blocks are interpreted and the results returned in
+ * an xf86MonPtr.
+ *
+ * This function does not affect the list of modes used by drivers -- it is up
+ * to the driver to decide policy on what to do with EDID information.
+ *
+ * @return pointer to a new xf86MonPtr containing the EDID information.
+ * @return NULL if no monitor attached or failure to interpret the EDID.
+ */
+xf86MonPtr
+xf86DoEDID_DDC1(
+    int scrnIndex, DDC1SetSpeedProc DDC1SetSpeed, 
+    unsigned int (*DDC1Read)(ScrnInfoPtr)
+)
+{
+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
+    unsigned char *EDID_block = NULL;
+    xf86MonPtr tmp = NULL;
+    int sigio;
+    /* Default DDC and DDC1 to enabled. */
+    Bool noddc = FALSE, noddc1 = FALSE;
+    OptionInfoPtr options;
+
+    options = xnfalloc(sizeof(DDCOptions));
+    (void)memcpy(options, DDCOptions, sizeof(DDCOptions));
+    xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, options);
+
+    xf86GetOptValBool(options, DDCOPT_NODDC, &noddc);
+    xf86GetOptValBool(options, DDCOPT_NODDC1, &noddc1);
+    xfree(options);
+    
+    if (noddc || noddc1)
+	return NULL;
+    
+    sigio = xf86BlockSIGIO();
+    EDID_block = EDIDRead_DDC1(pScrn,DDC1SetSpeed,DDC1Read);
+    xf86UnblockSIGIO(sigio);
+
+    if (EDID_block){
+	tmp = xf86InterpretEDID(scrnIndex,EDID_block);
+    }
+#ifdef DEBUG
+	else ErrorF("No EDID block returned\n");
+    if (!tmp)
+	ErrorF("Cannot interpret EDID block\n");
+#endif
+	return tmp;
+}
+
+/* DDC2 */
+
+static I2CDevPtr
+DDC2MakeDevice(I2CBusPtr pBus, int address, char *name)
+{
+    I2CDevPtr dev = NULL;
+
+    if (!(dev = xf86I2CFindDev(pBus, address))) {
+	dev = xf86CreateI2CDevRec();
+	dev->DevName = name;
+	dev->SlaveAddr = address;
+	dev->ByteTimeout = 2200; /* VESA DDC spec 3 p. 43 (+10 %) */
+	dev->StartTimeout = 550;
+	dev->BitTimeout = 40;
+	dev->AcknTimeout = 40;
+
+	dev->pI2CBus = pBus;
+	if (!xf86I2CDevInit(dev)) {
+	    xf86DrvMsg(pBus->scrnIndex, X_PROBED, "No DDC2 device\n");
+	    return NULL;
+	}
+    }
+
+    return dev;
+}
+
+static I2CDevPtr
+DDC2Init(int scrnIndex, I2CBusPtr pBus)
+{
+    I2CDevPtr dev = NULL;
+
+    /*
+     * Slow down the bus so that older monitors don't 
+     * miss things.
+     */
+    pBus->RiseFallTime = 20;
+ 
+    dev = DDC2MakeDevice(pBus, 0x00A0, "ddc2");
+    if (xf86I2CProbeAddress(pBus, 0x0060))
+	DDC2MakeDevice(pBus, 0x0060, "E-EDID segment register");
+    if (xf86I2CProbeAddress(pBus, 0x0062))
+	DDC2MakeDevice(pBus, 0x0062, "EDID EEPROM interface");
+    if (xf86I2CProbeAddress(pBus, 0x006E))
+	DDC2MakeDevice(pBus, 0x006E, "DDC control interface");
+
+    return dev;
+}
+
+/* Mmmm, smell the hacks */
+static void
+EEDIDStop(I2CDevPtr d)
+{
+}
+
+/* block is the EDID block number.  a segment is two blocks. */
+static Bool
+DDC2Read(I2CDevPtr dev, int block, unsigned char *R_Buffer)
+{
+    unsigned char W_Buffer[1];
+    int i, segment;
+    I2CDevPtr seg;
+    void (*stop)(I2CDevPtr);
+
+    for (i = 0; i < RETRIES; i++) {
+	/* Stop bits reset the segment pointer to 0, so be careful here. */
+	segment = block >> 1;
+	if (segment) {
+	    Bool b;
+	    
+	    if (!(seg = xf86I2CFindDev(dev->pI2CBus, 0x0060)))
+		return FALSE;
+
+	    W_Buffer[0] = segment;
+
+	    stop = dev->pI2CBus->I2CStop;
+	    dev->pI2CBus->I2CStop = EEDIDStop;
+
+	    b = xf86I2CWriteRead(seg, W_Buffer, 1, NULL, 0);
+
+	    dev->pI2CBus->I2CStop = stop;
+	    if (!b) {
+		dev->pI2CBus->I2CStop(dev);
+		continue;
+	    }
+	}
+
+	W_Buffer[0] = (block & 0x01) * EDID1_LEN;
+
+	if (xf86I2CWriteRead(dev, W_Buffer, 1, R_Buffer, EDID1_LEN)) {
+	    if (!DDC_checksum(R_Buffer, EDID1_LEN))
+		return TRUE;
+	}
+    }
+ 
+    return FALSE;
+}
+
+/**
+ * Attempts to probe the monitor for EDID information, if NoDDC and NoDDC2 are
+ * unset.  EDID information blocks are interpreted and the results returned in
+ * an xf86MonPtr.  Unlike xf86DoEDID_DDC[12](), this function will return
+ * the complete EDID data, including all extension blocks, if the 'complete'
+ * parameter is TRUE;
+ *
+ * This function does not affect the list of modes used by drivers -- it is up
+ * to the driver to decide policy on what to do with EDID information.
+ *
+ * @return pointer to a new xf86MonPtr containing the EDID information.
+ * @return NULL if no monitor attached or failure to interpret the EDID.
+ */
+xf86MonPtr
+xf86DoEEDID(int scrnIndex, I2CBusPtr pBus, Bool complete)
+{
+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
+    unsigned char *EDID_block = NULL;
+    xf86MonPtr tmp = NULL;
+    I2CDevPtr dev = NULL;
+    /* Default DDC and DDC2 to enabled. */
+    Bool noddc = FALSE, noddc2 = FALSE;
+    OptionInfoPtr options;
+
+    options = xalloc(sizeof(DDCOptions));
+    if (!options)
+	return NULL;
+    memcpy(options, DDCOptions, sizeof(DDCOptions));
+    xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, options);
+
+    xf86GetOptValBool(options, DDCOPT_NODDC, &noddc);
+    xf86GetOptValBool(options, DDCOPT_NODDC2, &noddc2);
+    xfree(options);
+
+    if (noddc || noddc2)
+	return NULL;
+
+    if (!(dev = DDC2Init(scrnIndex, pBus)))
+	return NULL;
+
+    EDID_block = xcalloc(1, EDID1_LEN);
+    if (!EDID_block)
+	return NULL;
+
+    if (DDC2Read(dev, 0, EDID_block)) {
+	int i, n = EDID_block[0x7e];
+
+	if (complete && n) {
+	    EDID_block = xrealloc(EDID_block, EDID1_LEN * (1+n));
+
+	    for (i = 0; i < n; i++)
+		DDC2Read(dev, i+1, EDID_block + (EDID1_LEN * (1+i)));
+	}
+
+	tmp = xf86InterpretEEDID(scrnIndex, EDID_block);
+    }
+
+    if (tmp && complete)
+	tmp->flags |= MONITOR_EDID_COMPLETE_RAWDATA;
+
+    return tmp;
+}
+
+/**
+ * Attempts to probe the monitor for EDID information, if NoDDC and NoDDC2 are
+ * unset.  EDID information blocks are interpreted and the results returned in
+ * an xf86MonPtr.
+ *
+ * This function does not affect the list of modes used by drivers -- it is up
+ * to the driver to decide policy on what to do with EDID information.
+ *
+ * @return pointer to a new xf86MonPtr containing the EDID information.
+ * @return NULL if no monitor attached or failure to interpret the EDID.
+ */
+xf86MonPtr
+xf86DoEDID_DDC2(int scrnIndex, I2CBusPtr pBus)
+{
+    return xf86DoEEDID(scrnIndex, pBus, FALSE);
+}
+
+/* XXX write me */
+static void *
+DDC2ReadDisplayID(void)
+{
+    return FALSE;
+}
+
+/**
+ * Attempts to probe the monitor for DisplayID information, if NoDDC and
+ * NoDDC2 are unset.  DisplayID blocks are interpreted and the results
+ * returned in an xf86MonPtr.
+ *
+ * This function does not affect the list of modes used by drivers -- it is up
+ * to the driver to decide policy on what to do with DisplayID information.
+ *
+ * @return pointer to a new xf86MonPtr containing the DisplayID information.
+ * @return NULL if no monitor attached or failure to interpret the DisplayID.
+ */
+xf86MonPtr
+xf86DoDisplayID(int scrnIndex, I2CBusPtr pBus)
+{
+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
+    unsigned char *did = NULL;
+    xf86MonPtr tmp = NULL;
+    I2CDevPtr dev = NULL;
+    /* Default DDC and DDC2 to enabled. */
+    Bool noddc = FALSE, noddc2 = FALSE;
+    OptionInfoPtr options;
+
+    options = xalloc(sizeof(DDCOptions));
+    if (!options)
+	return NULL;
+    memcpy(options, DDCOptions, sizeof(DDCOptions));
+    xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, options);
+
+    xf86GetOptValBool(options, DDCOPT_NODDC, &noddc);
+    xf86GetOptValBool(options, DDCOPT_NODDC2, &noddc2);
+    xfree(options);
+
+    if (noddc || noddc2)
+	return NULL;
+
+    if (!(dev = DDC2Init(scrnIndex, pBus)))
+	return NULL;
+
+    if ((did = DDC2ReadDisplayID())) {
+	tmp = xcalloc(1, sizeof(*tmp));
+	if (!tmp)
+	    return NULL;
+
+	tmp->scrnIndex = scrnIndex;
+	tmp->flags |= MONITOR_DISPLAYID;
+	tmp->rawData = did;
+    }
+
+    return tmp;
+}