Added xorg-server-1.6.2.tar.gz

3 files changed, 19 insertions, 246 deletions

diff --git a/xorg-server/hw/xfree86/doc/devel/DebuggingHints b/xorg-server/hw/xfree86/doc/devel/DebuggingHints
deleted file mode 100644
index 300fe4813..000000000
--- a/xorg-server/hw/xfree86/doc/devel/DebuggingHints
+++ /dev/null
@@ -1,192 +0,0 @@
-
-                        Xserver Debugging
-                        =================
-
-This file is  intended to collect helpful hints  on Xserver debugging.
-I merely outline my experiences  here. Somebody else might have better
-methods on  doing it. This person  is therefore invited  to share this
-experience with the rest of the world by adding it here.
-
-Paul Flinders has made some patches to gdb to add support for loadable
-modules.  This version  of gdb  is currently  available as  binary for
-Linux/x86 on Paul's web site:
-
-         www.dawa.demon.co.uk/xfree-gdb
-
-This web-site also contains the patches to gdb 4.18 so you may port it
-to other platforms.
-
-It  loads  the module  symbols  and  supports  all gdb  features  like
-breakpointing, disassembling  and single  stepping. It also  shows the
-exact location of a signal 11. Paul  has fixed the code so that all of
-this is  working even  if using modules  compiled without -g.  You can
-find his latest version on his web site.
-
-If no module aware gdb is available the following hints might help:
-
-1. Use remote  login. This  can be done  thru a network  connection or
-   simply by  connecting a serial  console. This enables you  to watch
-   the  Xservers output while  running set  breakpoints with  gdb etc.
-   Don't even try  to run the Xserver from  a system console. Whenever
-   something  happens gdb  waits for  input. However  the  Xserver has
-   locked the system console  including the keyboard, therefore you'll
-   never  be able  to send  any  input to  gdb. Even  if your  process
-   doesn't crash or you haven't set any breakpoints a vt switch can be
-   hazardous: When doing vt switching a signal is sent; unless you did
-         
-   gdb> handle SIGUSR1 nostop
-
-   gdb waits  for you to continue  the program which  cannot happen as
-   you don't have access to gdb's console.
-
-2. You can  compile any source  file with debugging symbols  to obtain
-   more information  about where an  error occurred. Simply go  to the
-   directory which holds the corresponding object file and do:
-            
-   # rm <file>.o
-   # xc/config/util/makeg.sh <file>.o
-
-   After  relinking the server  or module  gdb is  able to  obtain the
-   necessary debugging information and will show the exact line in the
-   source  where the error ccurred. See also:
-   xc/config/util/makeg.man.
-
-3. In some cases it might be  useful to have the assembler output of a
-   compiled source file. This can be obtained by doing:
-    
-   # make <file>.s
-   
-   or 
- 
-   # xc/config/util/makeg.sh <file>.s
-
-   Make will use exactly the same rules it uses for building *.o files.
-
-4. In some cases it might be useful to set breakpoints in modules.  If
-   no module  aware gdb is available you  should add a call  to one of
-   the three dummy breakpoint functions
-
-   xf86Break1(), xf86Break2() and xf86Break3()
-
-   to the source  file and recompile the module. You  now just have to
-   set  a  breakpoint  onto  the appropriate  dummy  functions.  These
-   functions are located in the  core part of the server and therefore
-   will be available any time.
-
-5. Without module support gdb is  not able to print the function where
-   an error occurred in a module.
-
-     If you get a line like:
-
-   (gdb) bt
-   #0  0x823b4f5 in ?? ()
-   ....
-
-   You may obtain the function the address belongs to by calling 
-   LoaderPrintSymbol():
-
-   (gdb) call LoaderPrintSymbol(0x823b4f5)
-
-   The symbol  returned might not always  be the name  of the function
-   which contains the address. In  case of static functions the symbol
-   is not known to  the loader. However LoaderPrintSymbol() will print
-   the nearest known  function and the offset from  its start. You may
-   easily find the exact location of the address if you do:
-
-   # objdump --disassemble <file>.o
-
-   <file>.o is the name of the object file containing the symbol printed.
-
-6. Locating static  symbols in modules is  simpler if the  module is a
-   single object  file instead  of a library.  Such a object  file can
-   easily  be build  from  a  library: #  mkdir  tmp #  cd  tmp; ar  x
-   module-path/<libname>.a # ld -r *.o -o module-path/<name>.o
-   
-   When calling  LoaderPrintSymbol() the closes public  symbol will be
-   printed together with  the offset from the symbol's  address.  If a
-   static symbol comes before the  first public symbol in a module The
-   following trick may help:
-
-   create a file 1-<name>.c in tmp/
-   containing:
-   void Dummy-<name>() {}
-    
-   Compile it:
-
-   # gcc -c 1-<name>.c
-
-   and do the link step above.
-
-   This way  Dummy-<name>() will be  the first public function  in the
-   module.   All  addresses in  static  function  can  now be  printed
-   relatively to this address if no other public function comes before
-   this static one.
-
-7. In some situations it is  quite helpful to add debugging symbols to
-   the binary.  This can  be done per  object file. Simply  remove the
-   object file and do
-
-   # makeg
-
-   When looking  for a bug  in a module  these debugging infos  can be
-   very helpful:  Calling LoaderPrintSymbol() as  described above will
-   return a  function and an offset  giving the exact  location of the
-   address  with   respect  to   this  function  entry   point.   When
-   disassembling an  object file with debugging symbols:  # objdump -d
-   -l <file>.o one will  receive a disassembled output containing line
-   number  information. Thus  one can  locate the  exact line  of code
-   where the error occurred.
-
-8. To quickly trace the value of a variable declared in a module three
-   dummy variables have been added to the core part:
-
-   CARD32 xf86DummyVar1;
-   CARD32 xf86DummyVar2;
-   CARD32 xf86DummyVar3;
-
-   The variable can  be assigned to one of them. One  can then use gdb
-   to return the value of this variable:
-
-   gdb> p /x xf86DummyVar1
-
-9. Sometimes it might be useful to check how the preprocessor replaced
-   symbols. One can  obtain a preprocessed version of  the source file
-   by doing:
-
-   make <filename>.i
-
-   This will generate a preprocessed source in <filename>.i.
-
-10. xfree() can catch  if one tries to free a  memory range twice. You
-    will get the message:
-
-       Xalloc error: range already freed in Xrealloc() :-(
-
-  To  find  the  location  from  which  xfree()  was  called  one  can
-  breakpoint on XfreeTrap(). The backtrace should show the origin of the
-  call this call. 
-
-11. To access mapped physical  memory the following functions might be
-    useful.  
-
-    These may be used to  access physical memory that was mapped using
-    the flags VIDMEM_FRAMEBUFFER or VIDMEM_MMIO32:
-
-      CARD8  xf86PeekFb8(CARD8  *p);
-      CARD16 xf86PeekFb16(CARD16 *p);
-      CARD32 xf86PeekFb32(CARD32 *p);
-      void xf86PokeFb8(CARD8  *p, CARD8  v);
-      void xf86PokeFb16(CARD16 *p, CARD16 v);
-      void xf86PokeFb32(CARD16 *p, CARD32 v);
-
-    Physical memory which was  mapped by setting VIDMEM_MMIO should be
-    accessed using the following.  Here  the base address to which the
-    memory is mapped and the offset are required separately.
-
-      CARD8  xf86PeekMmio8(pointer Base, unsigned long Offset);
-      CARD16 xf86PeekMmio16(pointer Base, unsigned long Offset);
-      CARD32 xf86PeekMmio32(pointer Base, unsigned long Offset);
-      void xf86PokeMmio8(pointer Base, unsigned long Offset, CARD8  v);
-      void xf86PokeMmio16(pointer Base, unsigned long Offset, CARD16 v);
-      void xf86PokeMmio32(pointer Base, unsigned long Offset, CARD32 v);
-
diff --git a/xorg-server/hw/xfree86/doc/devel/Makefile.am b/xorg-server/hw/xfree86/doc/devel/Makefile.am
index 6ca350c38..eb8b1cb29 100644
--- a/xorg-server/hw/xfree86/doc/devel/Makefile.am
+++ b/xorg-server/hw/xfree86/doc/devel/Makefile.am
@@ -2,7 +2,6 @@
 # not installed on the system for end-users
 
 EXTRA_DIST = \
-	DebuggingHints \
 	Domain.note \
 	RAC.Notes \
 	Registry \
diff --git a/xorg-server/hw/xfree86/doc/devel/Makefile.in b/xorg-server/hw/xfree86/doc/devel/Makefile.in
index 7c169aff3..d5d45e4a9 100644
--- a/xorg-server/hw/xfree86/doc/devel/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/devel/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -45,7 +45,6 @@ mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
 	$(top_builddir)/include/xorg-server.h \
 	$(top_builddir)/include/dix-config.h \
-	$(top_builddir)/include/xgl-config.h \
 	$(top_builddir)/include/xorg-config.h \
 	$(top_builddir)/include/xkb-config.h \
 	$(top_builddir)/include/xwin-config.h \
@@ -59,8 +58,9 @@ ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
-APPDEFAULTDIR = @APPDEFAULTDIR@
 APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@
+APPLE_APPLICATION_ID = @APPLE_APPLICATION_ID@
+APPLE_APPLICATION_NAME = @APPLE_APPLICATION_NAME@
 APP_MAN_DIR = @APP_MAN_DIR@
 APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
 AR = @AR@
@@ -81,10 +81,6 @@ CFLAGS = @CFLAGS@
 COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DARWIN_LIBS = @DARWIN_LIBS@
 DBUS_CFLAGS = @DBUS_CFLAGS@
@@ -106,6 +102,7 @@ DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@
 DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@
 DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@
 DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@
+DOLT_BASH = @DOLT_BASH@
 DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
 DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
 DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@
@@ -115,18 +112,15 @@ DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
 DRI_DRIVER_PATH = @DRI_DRIVER_PATH@
 DSYMUTIL = @DSYMUTIL@
 DTRACE = @DTRACE@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
-FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
-FREETYPE_LIBS = @FREETYPE_LIBS@
 GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
 GLX_DEFINES = @GLX_DEFINES@
 GL_CFLAGS = @GL_CFLAGS@
@@ -145,7 +139,7 @@ KDRIVE_LIBS = @KDRIVE_LIBS@
 KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@
 KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@
 KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@
-LAUNCHD = @LAUNCHD@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@
 LEX = @LEX@
@@ -159,7 +153,10 @@ LIBTOOL = @LIBTOOL@
 LIB_MAN_DIR = @LIB_MAN_DIR@
 LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LINUXDOC = @LINUXDOC@
+LIPO = @LIPO@
 LN_S = @LN_S@
+LTCOMPILE = @LTCOMPILE@
+LTCXXCOMPILE = @LTCXXCOMPILE@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
@@ -171,8 +168,7 @@ MESA_SOURCE = @MESA_SOURCE@
 MISC_MAN_DIR = @MISC_MAN_DIR@
 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
 MKDIR_P = @MKDIR_P@
-MKFONTDIR = @MKFONTDIR@
-MKFONTSCALE = @MKFONTSCALE@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJC = @OBJC@
 OBJCCLD = @OBJCCLD@
@@ -181,8 +177,8 @@ OBJCFLAGS = @OBJCFLAGS@
 OBJCLINK = @OBJCLINK@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
-OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
-OPENSSL_LIBS = @OPENSSL_LIBS@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -215,7 +211,6 @@ VENDOR_NAME = @VENDOR_NAME@
 VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
 VENDOR_RELEASE = @VENDOR_RELEASE@
 VERSION = @VERSION@
-X11APP_ARCHS = @X11APP_ARCHS@
 X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@
 X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@
 XDMCP_CFLAGS = @XDMCP_CFLAGS@
@@ -225,27 +220,12 @@ XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@
 XDMX_CFLAGS = @XDMX_CFLAGS@
 XDMX_LIBS = @XDMX_LIBS@
 XDMX_SYS_LIBS = @XDMX_SYS_LIBS@
-XEGLMODULES_CFLAGS = @XEGLMODULES_CFLAGS@
-XEGL_LIBS = @XEGL_LIBS@
-XEGL_SYS_LIBS = @XEGL_SYS_LIBS@
 XEPHYR_CFLAGS = @XEPHYR_CFLAGS@
-XEPHYR_DRI_LIBS = @XEPHYR_DRI_LIBS@
 XEPHYR_INCS = @XEPHYR_INCS@
 XEPHYR_LIBS = @XEPHYR_LIBS@
 XF86CONFIGFILE = @XF86CONFIGFILE@
-XF86MISC_CFLAGS = @XF86MISC_CFLAGS@
-XF86MISC_LIBS = @XF86MISC_LIBS@
 XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@
 XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@
-XGLMODULES_CFLAGS = @XGLMODULES_CFLAGS@
-XGLMODULES_LIBS = @XGLMODULES_LIBS@
-XGLXMODULES_CFLAGS = @XGLXMODULES_CFLAGS@
-XGLXMODULES_LIBS = @XGLXMODULES_LIBS@
-XGLX_LIBS = @XGLX_LIBS@
-XGLX_SYS_LIBS = @XGLX_SYS_LIBS@
-XGL_LIBS = @XGL_LIBS@
-XGL_MODULE_PATH = @XGL_MODULE_PATH@
-XGL_SYS_LIBS = @XGL_SYS_LIBS@
 XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@
 XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@
 XKB_COMPILED_DIR = @XKB_COMPILED_DIR@
@@ -256,10 +236,6 @@ XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@
 XNESTMODULES_LIBS = @XNESTMODULES_LIBS@
 XNEST_LIBS = @XNEST_LIBS@
 XNEST_SYS_LIBS = @XNEST_SYS_LIBS@
-XORGCFG_DEP_CFLAGS = @XORGCFG_DEP_CFLAGS@
-XORGCFG_DEP_LIBS = @XORGCFG_DEP_LIBS@
-XORGCONFIG_DEP_CFLAGS = @XORGCONFIG_DEP_CFLAGS@
-XORGCONFIG_DEP_LIBS = @XORGCONFIG_DEP_LIBS@
 XORG_CFLAGS = @XORG_CFLAGS@
 XORG_INCS = @XORG_INCS@
 XORG_LIBS = @XORG_LIBS@
@@ -268,13 +244,8 @@ XORG_MODULES_LIBS = @XORG_MODULES_LIBS@
 XORG_OS = @XORG_OS@
 XORG_OS_SUBDIR = @XORG_OS_SUBDIR@
 XORG_SYS_LIBS = @XORG_SYS_LIBS@
-XPRINTMODULES_CFLAGS = @XPRINTMODULES_CFLAGS@
-XPRINTMODULES_LIBS = @XPRINTMODULES_LIBS@
-XPRINTPROTO_CFLAGS = @XPRINTPROTO_CFLAGS@
-XPRINTPROTO_LIBS = @XPRINTPROTO_LIBS@
-XPRINT_CFLAGS = @XPRINT_CFLAGS@
-XPRINT_LIBS = @XPRINT_LIBS@
-XPRINT_SYS_LIBS = @XPRINT_SYS_LIBS@
+XPBPROXY_CFLAGS = @XPBPROXY_CFLAGS@
+XPBPROXY_LIBS = @XPBPROXY_LIBS@
 XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@
 XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@
 XSDL_INCS = @XSDL_INCS@
@@ -307,8 +278,7 @@ abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -328,7 +298,6 @@ driverdir = @driverdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 extdir = @extdir@
-ft_config = @ft_config@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
@@ -338,12 +307,12 @@ htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-launchagentsdir = @launchagentsdir@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
 logdir = @logdir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moduledir = @moduledir@
@@ -361,10 +330,7 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-xglmoduledir = @xglmoduledir@
-xpconfigdir = @xpconfigdir@
 EXTRA_DIST = \
-	DebuggingHints \
 	Domain.note \
 	RAC.Notes \
 	Registry \
@@ -378,8 +344,8 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \