Switched to xorg-server-1.7.99.2

5 files changed, 52 insertions, 478 deletions

diff --git a/xorg-server/hw/xfree86/doc/Makefile.in b/xorg-server/hw/xfree86/doc/Makefile.in
index 06ac44067..6e5c3ecaa 100644
--- a/xorg-server/hw/xfree86/doc/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/Makefile.in
@@ -147,6 +147,7 @@ DGA_LIBS = @DGA_LIBS@
 DIX_CFLAGS = @DIX_CFLAGS@
 DIX_LIB = @DIX_LIB@
 DLLTOOL = @DLLTOOL@
+DLOPEN_LIBS = @DLOPEN_LIBS@
 DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
 DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
 DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
@@ -177,6 +178,13 @@ EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FONT100DPIDIR = @FONT100DPIDIR@
+FONT75DPIDIR = @FONT75DPIDIR@
+FONTMISCDIR = @FONTMISCDIR@
+FONTOTFDIR = @FONTOTFDIR@
+FONTROOTDIR = @FONTROOTDIR@
+FONTTTFDIR = @FONTTTFDIR@
+FONTTYPE1DIR = @FONTTYPE1DIR@
 GLIB_CFLAGS = @GLIB_CFLAGS@
 GLIB_LIBS = @GLIB_LIBS@
 GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
@@ -187,6 +195,7 @@ GREP = @GREP@
 HAL_CFLAGS = @HAL_CFLAGS@
 HAL_LIBS = @HAL_LIBS@
 INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -236,6 +245,8 @@ OBJCFLAGS = @OBJCFLAGS@
 OBJCLINK = @OBJCLINK@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
 OS_LIB = @OS_LIB@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
@@ -260,6 +271,8 @@ RAWCPPFLAGS = @RAWCPPFLAGS@
 SED = @SED@
 SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
 SET_MAKE = @SET_MAKE@
+SHA1_CFLAGS = @SHA1_CFLAGS@
+SHA1_LIBS = @SHA1_LIBS@
 SHELL = @SHELL@
 SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
 SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
@@ -350,7 +363,6 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 driverdir = @driverdir@
 dvidir = @dvidir@
diff --git a/xorg-server/hw/xfree86/doc/README.modes b/xorg-server/hw/xfree86/doc/README.modes
deleted file mode 100644
index 894e21313..000000000
--- a/xorg-server/hw/xfree86/doc/README.modes
+++ /dev/null
@@ -1,474 +0,0 @@
-		    Multi-monitor Mode Setting APIs
-	           Keith Packard, <keithp@keithp.com
-		   	   6 March 2007
-
-1. Introduction
-
-This document describes a set of mode setting APIs added in X server version
-1.3 that support multiple monitors per card. These interfaces expose the
-underlying hardware CRTC and output concepts to the xf86 DDX layer so that
-the implementation of initial server setup and mode changes through
-extensions can be shared across drivers. In addition, these new interfaces
-support a new configuration mechanism as well which allows each monitor to
-be customized separately providing a consistent cross-driver configuration
-mechanism that supports the full range of output features.
-
-All of the code implementing this interface can be found in hw/xfree86/modes
-in the X server sources.
-
-2. Overview
-
-This document describes both the driver API and the configuration data
-placed in xorg.conf; these are entirely separate as the driver has no
-interaction with the configuration information at all. Much of the structure
-here is cloned from the RandR extension version 1.2 additions which deal
-with the same kinds of information.
-
-2.1 API overview
-
-The mode setting API is expressed through two new driver-visible objects,
-the 'CRTC' (xf86CrtcRec) and the 'Output' (xf86OutputRec). A CRTC refers to
-hardware within the video system that can scan a subset of the framebuffer
-and generate a video signal. An Output receives that signal and transmits it
-to a monitor, projector or other device.
-
-The xf86CrtcRec and xf86OutputRec contain a small amount of state data
-related to the object along with a pointer to a set of functions provided by
-the driver that manipulate the object in fairly simple ways.
-
-To emulate older behaviour, one of the outputs is picked as the 'compat'
-output; this output changes over time as outputs are detected and used, the
-goal is to always have one 'special' output which is used for operations
-which need a single defined monitor (like XFree86-VidModeExtension mode
-setting, RandR 1.1 mode setting, DDC property setting, etc.).
-
-2.1.1 Output overview 
-
-As outputs are connected to monitors, they hold a list of modes supported by
-the monitor. If the monitor and output support DDC, then the list of modes
-generally comes from the EDID data in the monitor. Otherwise, the server
-uses the standard VESA modes, pruned by monitor timing. If the configuration
-file doesn't contain monitor timing data, the server uses default timing
-information which supports 640x480, 800x600 and 1024x768 all with a 60Hz
-refresh rate.
-
-As hardware often limits possible configuration combinations, each output
-knows the set of CRTCs that it can be connected to as well as the set of
-other outputs which can be simutaneously connected to a CRTC.
-
-2.1.2 CRTC overview
-
-CRTCs serve only to stream frame buffer data to outputs using a mode line.
-Ideally, they would not be presented to the user at all, and in fact the
-configuration file doesn't expose them. The RandR 1.2 protocol does, but the
-hope there is that client-side applications will hide them carefully away.
-
-Each crtc has an associated cursor, along with the current configuration.
-All of the data needed to determine valid configurations is contained within
-the Outputs.
-
-2.2 Configuration overview
-
-As outputs drive monitors, the "Monitor" section has been repurposed to
-define their configuration. This provides for a bit more syntax than
-the large list of driver-specific options that were used in the past for
-similar configuration.
-
-However, the existing "Monitor" section referenced by the active "Screen"
-section no longer has any use at all; some sensible meaning for this
-parameter is needed now that a Screen can have multiple Monitors.
-
-3. Public Functions
-
-3.1 PreInit functions
-
-These functions should be used during the driver PreInit phase, they are
-arranged in the order they should be invoked.
-
-    void
-    xf86CrtcConfigInit (ScrnInfoPtr			scrn
-			const xf86CrtcConfigFuncsRec	*funcs)
-
-This function allocates and initializes structures needed to track CRTC and
-Output state.
-
-    void
-    xf86CrtcSetSizeRange (ScrnInfoPtr scrn,
-			  int minWidth, int minHeight,
-			  int maxWidth, int maxHeight)
-
-This sets the range of screen sizes supported by the driver.
-
-    xf86CrtcPtr
-    xf86CrtcCreate (ScrnInfoPtr             scrn,
-		    const xf86CrtcFuncsRec  *funcs)
-    
-Create one CRTC object. See the discussion below for a description of the
-contents of the xf86CrtcFuncsRec. Note that this is done in PreInit, so it
-should not be re-invoked at each server generation. Create one of these for
-each CRTC present in the hardware.
-    
-    xf86OutputPtr
-    xf86OutputCreate (ScrnInfoPtr              scrn,
-		      const xf86OutputFuncsRec *funcs,
-		      const char	       *name)
-
-Create one Output object. See the discussion below for a description of the
-contents of the xf86OutputFuncsRec. This is also called from PreInit and
-need not be re-invoked at each ScreenInit time. An Output should be created
-for every Output present in the hardware, not just for outputs which have
-detected monitors.
-    
-    Bool
-    xf86OutputRename (xf86OutputPtr output, const char *name)
-
-If necessary, the name of an output can be changed after it is created using
-this function.
-    
-    Bool
-    xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
-
-Using the resources provided, and the configuration specified by the user,
-this function computes an initial configuration for the server. It tries to
-enable as much hardware as possible using some fairly simple heuristics. 
-
-The 'canGrow' parameter indicates that the frame buffer does not have a fixed
-size (fixed size frame buffers are required by XAA). When the frame buffer
-has a fixed size, the configuration selects a 'reasonablely large' frame
-buffer so that common reconfiguration options are possible. For resizable
-frame buffers, the frame buffer is set to the smallest size that encloses
-the desired configuration.
-    
-3.2 ScreenInit functions
-
-These functions should be used during the driver ScreenInit phase.
-
-    Bool
-    xf86DiDGAInit (ScreenPtr screen, unsigned long dga_address)
-
-This function provides driver-independent accelerated DGA support for some
-of the DGA operations; using this, the driver can avoid needing to implement
-any of the rest of DGA.
-
-    Bool
-    xf86SaveScreen(ScreenPtr pScreen, int mode)
-
-Stick this in pScreen->SaveScreen and the core X screen saver will be
-implemented by disabling outputs and crtcs using their dpms functions.
-
-    void
-    xf86DPMSSet(ScrnInfoPtr scrn, int mode, int flags)
-
-Pass this function to xf86DPMSInit and all DPMS mode switching will be
-managed by using the dpms functions provided by the Outputs and CRTCs.
-
-    Bool
-    xf86CrtcScreenInit (ScreenPtr screen)
-
-This function completes the screen initialization process for the crtc and
-output objects. Call it near the end of the ScreenInit function, after the
-frame buffer and acceleration layers have been added.
-
-3.3 EnterVT functions
-
-Functions used during EnterVT, or whenever the current configuration needs
-to be applied to the hardware.
-
-    Bool
-    xf86SetDesiredModes (ScrnInfoPtr scrn)
-
-xf86InitialConfiguration selects the desired configuration at PreInit time;
-when the server finally hits ScreenInit, xf86SetDesiredModes is used by the
-driver to take that configuration and apply it to the hardware. In addition,
-successful mode selection at other times updates the configuration that will
-be used by this function, so LeaveVT/EnterVT pairs can simply invoke this
-and return to the previous configuration.
-
-3.4 SwitchMode functions
-
-Functions called from the pScrn->SwitchMode hook, which is used by the
-XFree86-VidModeExtension and the keypad mode switch commands.
-
-    Bool
-    xf86SetSingleMode (ScrnInfoPtr	scrn, 
-		       DisplayModePtr   desired,
-		       Rotation		rotation)
-
-This function applies the specified mode to all active outputs. Which is to
-say, it picks reasonable modes for all active outputs, attempting to get the
-screen to the specified size while not breaking anything that is currently
-working.
-
-3.7 get_modes functions
-
-Functions called during output->get_modes to help build lists of modes
-
-    xf86MonPtr
-    xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus)
-
-This returns the EDID data structure for the 'output' using the I2C bus
-'pDDCBus'. This has no effect on 'output' itself.
-
-    void
-    xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon)
-
-Once the EDID data has been fetched, this call applies the EDID data to the
-output object, setting the physical size and also various properties, like
-the DDC root window property (when output is the 'compat' output), and the
-RandR 1.2 EDID output properties.
-
-    DisplayModePtr
-    xf86OutputGetEDIDModes (xf86OutputPtr output)
-
-Given an EDID data structure, this function computes a list of suitable
-modes. This function also applies a sequence of 'quirks' during this process
-so that the returned modes may not actually match the mode data present in
-the EDID data.
-
-3.6 Other functions
-
-These remaining functions in the API can be used by the driver as needed.
-
-    Bool
-    xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation,
-		     int x, int y)
-
-Applies a mode to a CRTC. All of the outputs which are currently using the
-specified CRTC are included in the mode setting process. 'x' and 'y' are the
-offset within the frame buffer that the crtc is placed at. No checking is
-done in this function to ensure that the mode is usable by the active
-outputs.
-    
-    void
-    xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY)
-
-This discards the mode lists for all outputs, re-detects monitor presence
-and then acquires new mode lists for all monitors which are not disconnected.
-Monitor configuration data is used to modify the mode lists returned by the
-outputs. 'maxX' and 'maxY' limit the maximum size modes that will be
-returned.
-    
-    void
-    xf86SetScrnInfoModes (ScrnInfoPtr pScrn)
-
-This copies the 'compat' output mode list into the pScrn modes list which is
-used by the XFree86-VidModeExtension and the keypad mode switching
-operations. The current 'desired' mode for the CRTC associated with the
-'compat' output is placed first in this list to indicate the current mode.
-Usually, the driver won't need to call this function as
-xf86InitialConfiguration will do so automatically, as well as any RandR
-functions which reprobe for modes. However, if the driver reprobes for modes
-at other times using xf86ProbeOutputModes, this function needs to be called.
-    
-    Bool
-    xf86DiDGAReInit (ScreenPtr pScreen)
-
-This is similar to xf86SetScrnInfoModes, but it applies the 'compat' output
-mode list to the set of modes advertised by the DGA extension; it needs to
-be called whenever xf86ProbeOutputModes is invoked.
-
-    void
-    xf86DisableUnusedFunctions(ScrnInfoPtr pScrn)
-
-After any sequence of calls using xf86CrtcSetMode, this function cleans up
-any leftover Output and CRTC objects by disabling them, saving power. It is
-safe to call this whenever the server is running as it only disables objects
-which are not currently in use.
-    
-4. CRTC operations
-
-4.1 CRTC functions
-
-These functions provide an abstract interface for the CRTC object; most
-manipulation of the CRTC object is done through these functions.
-
-    void
-    crtc->funcs->dpms (xf86CrtcPtr crtc, int mode)
-
-Where 'mode' is one of DPMSModeOff, DPMSModeSuspend, DPMSModeStandby or
-DPMSModeOn. This requests that the crtc go to the specified power state.
-When changing power states, the output dpms functions are invoked before the
-crtc dpms functions.
-
-    void
-    crtc->funcs->save (xf86CrtcPtr crtc)
-	
-    void
-    crtc->funcs->restore (xf86CrtcPtr crtc)
-
-Preserve/restore any register contents related to the CRTC. These are
-strictly a convenience for the driver writer; if the existing driver has
-fully operation save/restore functions, you need not place any additional
-code here. In particular, the server itself never uses this function.
-
-    Bool
-    crtc->funcs->lock (xf86CrtcPtr crtc)
-	
-    void
-    crtc->funcs->unlock (xf86CrtcPtr crtc)
-
-These functions are invoked around mode setting operations; the intent is
-that DRI locking be done here to prevent DRI applications from manipulating
-the hardware while the server is busy changing the output configuration. If
-the lock function returns FALSE, the unlock function will not be invoked.
-
-    Bool
-    crtc->funcs->mode_fixup (xf86CrtcPtr crtc, 
-			     DisplayModePtr mode,
-			     DisplayModePtr adjusted_mode)
-
-This call gives the CRTC a chance to see what mode will be set and to
-comment on the mode by changing 'adjusted_mode' as needed. This function
-shall not modify the state of the crtc hardware at all. If the CRTC cannot
-accept this mode, this function may return FALSE.
-
-    void
-    crtc->funcs->prepare (xf86CrtcPtr crtc)
-
-This call is made just before the mode is set to make the hardware ready for
-the operation. A usual function to perform here is to disable the crtc so
-that mode setting can occur with clocks turned off and outputs deactivated.
-
-    void
-    crtc->funcs->mode_set (xf86CrtcPtr crtc,
-			   DisplayModePtr mode,
-			   DisplayModePtr adjusted_mode)
-
-This function applies the specified mode (possibly adjusted by the CRTC
-and/or Outputs).
-
-    void
-    crtc->funcs->commit (xf86CrtcPtr crtc)
-
-Once the mode has been applied to the CRTC and Outputs, this function is
-invoked to let the hardware turn things back on.
-
-    void
-    crtc->funcs->gamma_set (xf86CrtcPtr crtc, CARD16 *red,
-			    CARD16 *green, CARD16 *blue, int size)
-
-This function adjusts the gamma ramps for the specified crtc.
-
-    void *
-    crtc->funcs->shadow_allocate (xf86CrtcPtr crtc, int width, int height)
-
-This function allocates frame buffer space for a shadow frame buffer. When
-allocated, the crtc must scan from the shadow instead of the main frame
-buffer. This is used for rotation. The address returned is passed to the
-shadow_create function. This function should return NULL on failure.
-
-    PixmapPtr
-    crtc->funcs->shadow_create (xf86CrtcPtr crtc, void *data,
-				int width, int height)
-
-This function creates a pixmap object that will be used as a shadow of the
-main frame buffer for CRTCs which are rotated or reflected. 'data' is the
-value returned by shadow_allocate.
-
-    void
-    crtc->funcs->shadow_destroy (xf86CrtcPtr crtc, PixmapPtr pPixmap,
-				 void *data)
-
-Destroys any associated shadow objects. If pPixmap is NULL, then a pixmap
-was not created, but 'data' may still be non-NULL indicating that the shadow
-had been allocated.
-
-    void
-    crtc->funcs->destroy (xf86CrtcPtr crtc)
-
-When a CRTC is destroyed (which only happens in error cases), this function
-can clean up any driver-specific data.
-
-4.2 CRTC fields
-
-The CRTC object is not opaque; there are several fields of interest to the
-driver writer.
-
-    struct _xf86Crtc {
-	/**
-	 * Associated ScrnInfo
-	 */
-	ScrnInfoPtr     scrn;
-    
-	/**
-	 * Active state of this CRTC
-	 *
-	 * Set when this CRTC is driving one or more outputs
-	 */
-	Bool            enabled;
-    
-	/** Track whether cursor is within CRTC range  */
-	Bool            cursorInRange;
-    
-	/** Track state of cursor associated with this CRTC */
-	Bool            cursorShown;
-    
-	/**
-	 * Active mode
-	 *
-	 * This reflects the mode as set in the CRTC currently
-	 * It will be cleared when the VT is not active or
-	 * during server startup
-	 */
-	DisplayModeRec  mode;
-	Rotation        rotation;
-	PixmapPtr       rotatedPixmap;
-	void            *rotatedData;
-    
-	/**
-	 * Position on screen
-	 *
-	 * Locates this CRTC within the frame buffer
-	 */
-	int             x, y;
-    
-	/**
-	 * Desired mode
-	 *
-	 * This is set to the requested mode, independent of
-	 * whether the VT is active. In particular, it receives
-	 * the startup configured mode and saves the active mode
-	 * on VT switch.
-	 */
-	DisplayModeRec  desiredMode;
-	Rotation        desiredRotation;
-	int             desiredX, desiredY;
-    
-	/** crtc-specific functions */
-	const xf86CrtcFuncsRec *funcs;
-    
-	/**
-	 * Driver private
-	 *
-	 * Holds driver-private information
-	 */
-	void            *driver_private;
-    #ifdef RANDR_12_INTERFACE
-	/**
-	 * RandR crtc
-	 *
-	 * When RandR 1.2 is available, this
-	 * points at the associated crtc object
-	 */
-	RRCrtcPtr       randr_crtc;
-    #else
-	void            *randr_crtc;
-    #endif
-    };
-
-    
-5. Output functions.
-
-6. Configuration
-
-Because the configuration file syntax is fixed,
-this was done by creating new "Driver" section options that hook specific
-outputs to specific "Monitor" sections in the file. The option:
-section of the form:
-
-	Option	"monitor-VGA" "My VGA Monitor"
-
-connects the VGA output of this driver to the "Monitor" section with
-Identifier "My VGA Monitor". All of the usual monitor options can now be
-placed in that "Monitor" section and will be applied to the VGA output
-configuration.
diff --git a/xorg-server/hw/xfree86/doc/devel/Makefile.in b/xorg-server/hw/xfree86/doc/devel/Makefile.in
index 5b1dabe78..c3776b573 100644
--- a/xorg-server/hw/xfree86/doc/devel/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/devel/Makefile.in
@@ -110,6 +110,7 @@ DGA_LIBS = @DGA_LIBS@
 DIX_CFLAGS = @DIX_CFLAGS@
 DIX_LIB = @DIX_LIB@
 DLLTOOL = @DLLTOOL@
+DLOPEN_LIBS = @DLOPEN_LIBS@
 DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
 DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
 DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
@@ -140,6 +141,13 @@ EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FONT100DPIDIR = @FONT100DPIDIR@
+FONT75DPIDIR = @FONT75DPIDIR@
+FONTMISCDIR = @FONTMISCDIR@
+FONTOTFDIR = @FONTOTFDIR@
+FONTROOTDIR = @FONTROOTDIR@
+FONTTTFDIR = @FONTTTFDIR@
+FONTTYPE1DIR = @FONTTYPE1DIR@
 GLIB_CFLAGS = @GLIB_CFLAGS@
 GLIB_LIBS = @GLIB_LIBS@
 GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
@@ -150,6 +158,7 @@ GREP = @GREP@
 HAL_CFLAGS = @HAL_CFLAGS@
 HAL_LIBS = @HAL_LIBS@
 INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -199,6 +208,8 @@ OBJCFLAGS = @OBJCFLAGS@
 OBJCLINK = @OBJCLINK@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
 OS_LIB = @OS_LIB@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
@@ -223,6 +234,8 @@ RAWCPPFLAGS = @RAWCPPFLAGS@
 SED = @SED@
 SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
 SET_MAKE = @SET_MAKE@
+SHA1_CFLAGS = @SHA1_CFLAGS@
+SHA1_LIBS = @SHA1_LIBS@
 SHELL = @SHELL@
 SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
 SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
@@ -313,7 +326,6 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 driverdir = @driverdir@
 dvidir = @dvidir@
diff --git a/xorg-server/hw/xfree86/doc/man/Makefile.in b/xorg-server/hw/xfree86/doc/man/Makefile.in
index 7693cb6d4..992f16cc3 100644
--- a/xorg-server/hw/xfree86/doc/man/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/man/Makefile.in
@@ -136,6 +136,7 @@ DGA_LIBS = @DGA_LIBS@
 DIX_CFLAGS = @DIX_CFLAGS@
 DIX_LIB = @DIX_LIB@
 DLLTOOL = @DLLTOOL@
+DLOPEN_LIBS = @DLOPEN_LIBS@
 DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
 DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
 DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
@@ -166,6 +167,13 @@ EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FONT100DPIDIR = @FONT100DPIDIR@
+FONT75DPIDIR = @FONT75DPIDIR@
+FONTMISCDIR = @FONTMISCDIR@
+FONTOTFDIR = @FONTOTFDIR@
+FONTROOTDIR = @FONTROOTDIR@
+FONTTTFDIR = @FONTTTFDIR@
+FONTTYPE1DIR = @FONTTYPE1DIR@
 GLIB_CFLAGS = @GLIB_CFLAGS@
 GLIB_LIBS = @GLIB_LIBS@
 GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
@@ -176,6 +184,7 @@ GREP = @GREP@
 HAL_CFLAGS = @HAL_CFLAGS@
 HAL_LIBS = @HAL_LIBS@
 INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -225,6 +234,8 @@ OBJCFLAGS = @OBJCFLAGS@
 OBJCLINK = @OBJCLINK@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
 OS_LIB = @OS_LIB@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
@@ -249,6 +260,8 @@ RAWCPPFLAGS = @RAWCPPFLAGS@
 SED = sed
 SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
 SET_MAKE = @SET_MAKE@
+SHA1_CFLAGS = @SHA1_CFLAGS@
+SHA1_LIBS = @SHA1_LIBS@
 SHELL = @SHELL@
 SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
 SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
@@ -339,7 +352,6 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 driverdir = @driverdir@
 dvidir = @dvidir@
diff --git a/xorg-server/hw/xfree86/doc/sgml/Makefile.in b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
index d203a07f4..0fb1a10ce 100644
--- a/xorg-server/hw/xfree86/doc/sgml/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
@@ -130,6 +130,7 @@ DGA_LIBS = @DGA_LIBS@
 DIX_CFLAGS = @DIX_CFLAGS@
 DIX_LIB = @DIX_LIB@
 DLLTOOL = @DLLTOOL@
+DLOPEN_LIBS = @DLOPEN_LIBS@
 DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
 DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
 DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
@@ -160,6 +161,13 @@ EXEEXT = @EXEEXT@
 FGREP = @FGREP@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FONT100DPIDIR = @FONT100DPIDIR@
+FONT75DPIDIR = @FONT75DPIDIR@
+FONTMISCDIR = @FONTMISCDIR@
+FONTOTFDIR = @FONTOTFDIR@
+FONTROOTDIR = @FONTROOTDIR@
+FONTTTFDIR = @FONTTTFDIR@
+FONTTYPE1DIR = @FONTTYPE1DIR@
 GLIB_CFLAGS = @GLIB_CFLAGS@
 GLIB_LIBS = @GLIB_LIBS@
 GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
@@ -170,6 +178,7 @@ GREP = @GREP@
 HAL_CFLAGS = @HAL_CFLAGS@
 HAL_LIBS = @HAL_LIBS@
 INSTALL = @INSTALL@
+INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -219,6 +228,8 @@ OBJCFLAGS = @OBJCFLAGS@
 OBJCLINK = @OBJCLINK@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
 OS_LIB = @OS_LIB@
 OTOOL = @OTOOL@
 OTOOL64 = @OTOOL64@
@@ -243,6 +254,8 @@ RAWCPPFLAGS = @RAWCPPFLAGS@
 SED = @SED@
 SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
 SET_MAKE = @SET_MAKE@
+SHA1_CFLAGS = @SHA1_CFLAGS@
+SHA1_LIBS = @SHA1_LIBS@
 SHELL = @SHELL@
 SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
 SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
@@ -333,7 +346,6 @@ build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
-distcleancheck_listfiles = @distcleancheck_listfiles@
 docdir = @docdir@
 driverdir = @driverdir@
 dvidir = @dvidir@