aboutsummaryrefslogtreecommitdiff
path: root/xorg-server/hw/xfree86/doc
diff options
context:
space:
mode:
authormarha <marha@users.sourceforge.net>2010-02-14 21:52:51 +0000
committermarha <marha@users.sourceforge.net>2010-02-14 21:52:51 +0000
commit00e6751183c1e854ea3eba746b101449b32201a4 (patch)
tree3494085d6728e086582f30c8a68846d81840303d /xorg-server/hw/xfree86/doc
parentac637a8cd15f3977f44b701c7ac71a561763c1d8 (diff)
parent8d38172d866775594af3185ae3fbd8d750677650 (diff)
downloadvcxsrv-00e6751183c1e854ea3eba746b101449b32201a4.tar.gz
vcxsrv-00e6751183c1e854ea3eba746b101449b32201a4.tar.bz2
vcxsrv-00e6751183c1e854ea3eba746b101449b32201a4.zip
svn merge ^/branches/released
Diffstat (limited to 'xorg-server/hw/xfree86/doc')
-rw-r--r--xorg-server/hw/xfree86/doc/Makefile.in10
-rw-r--r--xorg-server/hw/xfree86/doc/README.modes474
-rw-r--r--xorg-server/hw/xfree86/doc/devel/Makefile.in6
-rw-r--r--xorg-server/hw/xfree86/doc/man/Makefile.in10
-rw-r--r--xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre33
-rw-r--r--xorg-server/hw/xfree86/doc/sgml/Makefile.in6
6 files changed, 52 insertions, 487 deletions
diff --git a/xorg-server/hw/xfree86/doc/Makefile.in b/xorg-server/hw/xfree86/doc/Makefile.in
index 6e5c3ecaa..fba837fca 100644
--- a/xorg-server/hw/xfree86/doc/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -277,8 +277,11 @@ SHELL = @SHELL@
SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
STRIP = @STRIP@
+SYSCONFDIR = @SYSCONFDIR@
TSLIB_CFLAGS = @TSLIB_CFLAGS@
TSLIB_LIBS = @TSLIB_LIBS@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
VERSION = @VERSION@
@@ -338,6 +341,7 @@ XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
+__XCONFIGDIR__ = @__XCONFIGDIR__@
__XCONFIGFILE__ = @__XCONFIGFILE__@
abi_ansic = @abi_ansic@
abi_extension = @abi_extension@
@@ -454,7 +458,7 @@ clean-libtool:
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -479,7 +483,7 @@ $(RECURSIVE_TARGETS):
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
diff --git a/xorg-server/hw/xfree86/doc/README.modes b/xorg-server/hw/xfree86/doc/README.modes
deleted file mode 100644
index 894e21313..000000000
--- a/xorg-server/hw/xfree86/doc/README.modes
+++ /dev/null
@@ -1,474 +0,0 @@
- Multi-monitor Mode Setting APIs
- Keith Packard, <keithp@keithp.com
- 6 March 2007
-
-1. Introduction
-
-This document describes a set of mode setting APIs added in X server version
-1.3 that support multiple monitors per card. These interfaces expose the
-underlying hardware CRTC and output concepts to the xf86 DDX layer so that
-the implementation of initial server setup and mode changes through
-extensions can be shared across drivers. In addition, these new interfaces
-support a new configuration mechanism as well which allows each monitor to
-be customized separately providing a consistent cross-driver configuration
-mechanism that supports the full range of output features.
-
-All of the code implementing this interface can be found in hw/xfree86/modes
-in the X server sources.
-
-2. Overview
-
-This document describes both the driver API and the configuration data
-placed in xorg.conf; these are entirely separate as the driver has no
-interaction with the configuration information at all. Much of the structure
-here is cloned from the RandR extension version 1.2 additions which deal
-with the same kinds of information.
-
-2.1 API overview
-
-The mode setting API is expressed through two new driver-visible objects,
-the 'CRTC' (xf86CrtcRec) and the 'Output' (xf86OutputRec). A CRTC refers to
-hardware within the video system that can scan a subset of the framebuffer
-and generate a video signal. An Output receives that signal and transmits it
-to a monitor, projector or other device.
-
-The xf86CrtcRec and xf86OutputRec contain a small amount of state data
-related to the object along with a pointer to a set of functions provided by
-the driver that manipulate the object in fairly simple ways.
-
-To emulate older behaviour, one of the outputs is picked as the 'compat'
-output; this output changes over time as outputs are detected and used, the
-goal is to always have one 'special' output which is used for operations
-which need a single defined monitor (like XFree86-VidModeExtension mode
-setting, RandR 1.1 mode setting, DDC property setting, etc.).
-
-2.1.1 Output overview
-
-As outputs are connected to monitors, they hold a list of modes supported by
-the monitor. If the monitor and output support DDC, then the list of modes
-generally comes from the EDID data in the monitor. Otherwise, the server
-uses the standard VESA modes, pruned by monitor timing. If the configuration
-file doesn't contain monitor timing data, the server uses default timing
-information which supports 640x480, 800x600 and 1024x768 all with a 60Hz
-refresh rate.
-
-As hardware often limits possible configuration combinations, each output
-knows the set of CRTCs that it can be connected to as well as the set of
-other outputs which can be simutaneously connected to a CRTC.
-
-2.1.2 CRTC overview
-
-CRTCs serve only to stream frame buffer data to outputs using a mode line.
-Ideally, they would not be presented to the user at all, and in fact the
-configuration file doesn't expose them. The RandR 1.2 protocol does, but the
-hope there is that client-side applications will hide them carefully away.
-
-Each crtc has an associated cursor, along with the current configuration.
-All of the data needed to determine valid configurations is contained within
-the Outputs.
-
-2.2 Configuration overview
-
-As outputs drive monitors, the "Monitor" section has been repurposed to
-define their configuration. This provides for a bit more syntax than
-the large list of driver-specific options that were used in the past for
-similar configuration.
-
-However, the existing "Monitor" section referenced by the active "Screen"
-section no longer has any use at all; some sensible meaning for this
-parameter is needed now that a Screen can have multiple Monitors.
-
-3. Public Functions
-
-3.1 PreInit functions
-
-These functions should be used during the driver PreInit phase, they are
-arranged in the order they should be invoked.
-
- void
- xf86CrtcConfigInit (ScrnInfoPtr scrn
- const xf86CrtcConfigFuncsRec *funcs)
-
-This function allocates and initializes structures needed to track CRTC and
-Output state.
-
- void
- xf86CrtcSetSizeRange (ScrnInfoPtr scrn,
- int minWidth, int minHeight,
- int maxWidth, int maxHeight)
-
-This sets the range of screen sizes supported by the driver.
-
- xf86CrtcPtr
- xf86CrtcCreate (ScrnInfoPtr scrn,
- const xf86CrtcFuncsRec *funcs)
-
-Create one CRTC object. See the discussion below for a description of the
-contents of the xf86CrtcFuncsRec. Note that this is done in PreInit, so it
-should not be re-invoked at each server generation. Create one of these for
-each CRTC present in the hardware.
-
- xf86OutputPtr
- xf86OutputCreate (ScrnInfoPtr scrn,
- const xf86OutputFuncsRec *funcs,
- const char *name)
-
-Create one Output object. See the discussion below for a description of the
-contents of the xf86OutputFuncsRec. This is also called from PreInit and
-need not be re-invoked at each ScreenInit time. An Output should be created
-for every Output present in the hardware, not just for outputs which have
-detected monitors.
-
- Bool
- xf86OutputRename (xf86OutputPtr output, const char *name)
-
-If necessary, the name of an output can be changed after it is created using
-this function.
-
- Bool
- xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
-
-Using the resources provided, and the configuration specified by the user,
-this function computes an initial configuration for the server. It tries to
-enable as much hardware as possible using some fairly simple heuristics.
-
-The 'canGrow' parameter indicates that the frame buffer does not have a fixed
-size (fixed size frame buffers are required by XAA). When the frame buffer
-has a fixed size, the configuration selects a 'reasonablely large' frame
-buffer so that common reconfiguration options are possible. For resizable
-frame buffers, the frame buffer is set to the smallest size that encloses
-the desired configuration.
-
-3.2 ScreenInit functions
-
-These functions should be used during the driver ScreenInit phase.
-
- Bool
- xf86DiDGAInit (ScreenPtr screen, unsigned long dga_address)
-
-This function provides driver-independent accelerated DGA support for some
-of the DGA operations; using this, the driver can avoid needing to implement
-any of the rest of DGA.
-
- Bool
- xf86SaveScreen(ScreenPtr pScreen, int mode)
-
-Stick this in pScreen->SaveScreen and the core X screen saver will be
-implemented by disabling outputs and crtcs using their dpms functions.
-
- void
- xf86DPMSSet(ScrnInfoPtr scrn, int mode, int flags)
-
-Pass this function to xf86DPMSInit and all DPMS mode switching will be
-managed by using the dpms functions provided by the Outputs and CRTCs.
-
- Bool
- xf86CrtcScreenInit (ScreenPtr screen)
-
-This function completes the screen initialization process for the crtc and
-output objects. Call it near the end of the ScreenInit function, after the
-frame buffer and acceleration layers have been added.
-
-3.3 EnterVT functions
-
-Functions used during EnterVT, or whenever the current configuration needs
-to be applied to the hardware.
-
- Bool
- xf86SetDesiredModes (ScrnInfoPtr scrn)
-
-xf86InitialConfiguration selects the desired configuration at PreInit time;
-when the server finally hits ScreenInit, xf86SetDesiredModes is used by the
-driver to take that configuration and apply it to the hardware. In addition,
-successful mode selection at other times updates the configuration that will
-be used by this function, so LeaveVT/EnterVT pairs can simply invoke this
-and return to the previous configuration.
-
-3.4 SwitchMode functions
-
-Functions called from the pScrn->SwitchMode hook, which is used by the
-XFree86-VidModeExtension and the keypad mode switch commands.
-
- Bool
- xf86SetSingleMode (ScrnInfoPtr scrn,
- DisplayModePtr desired,
- Rotation rotation)
-
-This function applies the specified mode to all active outputs. Which is to
-say, it picks reasonable modes for all active outputs, attempting to get the
-screen to the specified size while not breaking anything that is currently
-working.
-
-3.7 get_modes functions
-
-Functions called during output->get_modes to help build lists of modes
-
- xf86MonPtr
- xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus)
-
-This returns the EDID data structure for the 'output' using the I2C bus
-'pDDCBus'. This has no effect on 'output' itself.
-
- void
- xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon)
-
-Once the EDID data has been fetched, this call applies the EDID data to the
-output object, setting the physical size and also various properties, like
-the DDC root window property (when output is the 'compat' output), and the
-RandR 1.2 EDID output properties.
-
- DisplayModePtr
- xf86OutputGetEDIDModes (xf86OutputPtr output)
-
-Given an EDID data structure, this function computes a list of suitable
-modes. This function also applies a sequence of 'quirks' during this process
-so that the returned modes may not actually match the mode data present in
-the EDID data.
-
-3.6 Other functions
-
-These remaining functions in the API can be used by the driver as needed.
-
- Bool
- xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation,
- int x, int y)
-
-Applies a mode to a CRTC. All of the outputs which are currently using the
-specified CRTC are included in the mode setting process. 'x' and 'y' are the
-offset within the frame buffer that the crtc is placed at. No checking is
-done in this function to ensure that the mode is usable by the active
-outputs.
-
- void
- xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY)
-
-This discards the mode lists for all outputs, re-detects monitor presence
-and then acquires new mode lists for all monitors which are not disconnected.
-Monitor configuration data is used to modify the mode lists returned by the
-outputs. 'maxX' and 'maxY' limit the maximum size modes that will be
-returned.
-
- void
- xf86SetScrnInfoModes (ScrnInfoPtr pScrn)
-
-This copies the 'compat' output mode list into the pScrn modes list which is
-used by the XFree86-VidModeExtension and the keypad mode switching
-operations. The current 'desired' mode for the CRTC associated with the
-'compat' output is placed first in this list to indicate the current mode.
-Usually, the driver won't need to call this function as
-xf86InitialConfiguration will do so automatically, as well as any RandR
-functions which reprobe for modes. However, if the driver reprobes for modes
-at other times using xf86ProbeOutputModes, this function needs to be called.
-
- Bool
- xf86DiDGAReInit (ScreenPtr pScreen)
-
-This is similar to xf86SetScrnInfoModes, but it applies the 'compat' output
-mode list to the set of modes advertised by the DGA extension; it needs to
-be called whenever xf86ProbeOutputModes is invoked.
-
- void
- xf86DisableUnusedFunctions(ScrnInfoPtr pScrn)
-
-After any sequence of calls using xf86CrtcSetMode, this function cleans up
-any leftover Output and CRTC objects by disabling them, saving power. It is
-safe to call this whenever the server is running as it only disables objects
-which are not currently in use.
-
-4. CRTC operations
-
-4.1 CRTC functions
-
-These functions provide an abstract interface for the CRTC object; most
-manipulation of the CRTC object is done through these functions.
-
- void
- crtc->funcs->dpms (xf86CrtcPtr crtc, int mode)
-
-Where 'mode' is one of DPMSModeOff, DPMSModeSuspend, DPMSModeStandby or
-DPMSModeOn. This requests that the crtc go to the specified power state.
-When changing power states, the output dpms functions are invoked before the
-crtc dpms functions.
-
- void
- crtc->funcs->save (xf86CrtcPtr crtc)
-
- void
- crtc->funcs->restore (xf86CrtcPtr crtc)
-
-Preserve/restore any register contents related to the CRTC. These are
-strictly a convenience for the driver writer; if the existing driver has
-fully operation save/restore functions, you need not place any additional
-code here. In particular, the server itself never uses this function.
-
- Bool
- crtc->funcs->lock (xf86CrtcPtr crtc)
-
- void
- crtc->funcs->unlock (xf86CrtcPtr crtc)
-
-These functions are invoked around mode setting operations; the intent is
-that DRI locking be done here to prevent DRI applications from manipulating
-the hardware while the server is busy changing the output configuration. If
-the lock function returns FALSE, the unlock function will not be invoked.
-
- Bool
- crtc->funcs->mode_fixup (xf86CrtcPtr crtc,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode)
-
-This call gives the CRTC a chance to see what mode will be set and to
-comment on the mode by changing 'adjusted_mode' as needed. This function
-shall not modify the state of the crtc hardware at all. If the CRTC cannot
-accept this mode, this function may return FALSE.
-
- void
- crtc->funcs->prepare (xf86CrtcPtr crtc)
-
-This call is made just before the mode is set to make the hardware ready for
-the operation. A usual function to perform here is to disable the crtc so
-that mode setting can occur with clocks turned off and outputs deactivated.
-
- void
- crtc->funcs->mode_set (xf86CrtcPtr crtc,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode)
-
-This function applies the specified mode (possibly adjusted by the CRTC
-and/or Outputs).
-
- void
- crtc->funcs->commit (xf86CrtcPtr crtc)
-
-Once the mode has been applied to the CRTC and Outputs, this function is
-invoked to let the hardware turn things back on.
-
- void
- crtc->funcs->gamma_set (xf86CrtcPtr crtc, CARD16 *red,
- CARD16 *green, CARD16 *blue, int size)
-
-This function adjusts the gamma ramps for the specified crtc.
-
- void *
- crtc->funcs->shadow_allocate (xf86CrtcPtr crtc, int width, int height)
-
-This function allocates frame buffer space for a shadow frame buffer. When
-allocated, the crtc must scan from the shadow instead of the main frame
-buffer. This is used for rotation. The address returned is passed to the
-shadow_create function. This function should return NULL on failure.
-
- PixmapPtr
- crtc->funcs->shadow_create (xf86CrtcPtr crtc, void *data,
- int width, int height)
-
-This function creates a pixmap object that will be used as a shadow of the
-main frame buffer for CRTCs which are rotated or reflected. 'data' is the
-value returned by shadow_allocate.
-
- void
- crtc->funcs->shadow_destroy (xf86CrtcPtr crtc, PixmapPtr pPixmap,
- void *data)
-
-Destroys any associated shadow objects. If pPixmap is NULL, then a pixmap
-was not created, but 'data' may still be non-NULL indicating that the shadow
-had been allocated.
-
- void
- crtc->funcs->destroy (xf86CrtcPtr crtc)
-
-When a CRTC is destroyed (which only happens in error cases), this function
-can clean up any driver-specific data.
-
-4.2 CRTC fields
-
-The CRTC object is not opaque; there are several fields of interest to the
-driver writer.
-
- struct _xf86Crtc {
- /**
- * Associated ScrnInfo
- */
- ScrnInfoPtr scrn;
-
- /**
- * Active state of this CRTC
- *
- * Set when this CRTC is driving one or more outputs
- */
- Bool enabled;
-
- /** Track whether cursor is within CRTC range */
- Bool cursorInRange;
-
- /** Track state of cursor associated with this CRTC */
- Bool cursorShown;
-
- /**
- * Active mode
- *
- * This reflects the mode as set in the CRTC currently
- * It will be cleared when the VT is not active or
- * during server startup
- */
- DisplayModeRec mode;
- Rotation rotation;
- PixmapPtr rotatedPixmap;
- void *rotatedData;
-
- /**
- * Position on screen
- *
- * Locates this CRTC within the frame buffer
- */
- int x, y;
-
- /**
- * Desired mode
- *
- * This is set to the requested mode, independent of
- * whether the VT is active. In particular, it receives
- * the startup configured mode and saves the active mode
- * on VT switch.
- */
- DisplayModeRec desiredMode;
- Rotation desiredRotation;
- int desiredX, desiredY;
-
- /** crtc-specific functions */
- const xf86CrtcFuncsRec *funcs;
-
- /**
- * Driver private
- *
- * Holds driver-private information
- */
- void *driver_private;
- #ifdef RANDR_12_INTERFACE
- /**
- * RandR crtc
- *
- * When RandR 1.2 is available, this
- * points at the associated crtc object
- */
- RRCrtcPtr randr_crtc;
- #else
- void *randr_crtc;
- #endif
- };
-
-
-5. Output functions.
-
-6. Configuration
-
-Because the configuration file syntax is fixed,
-this was done by creating new "Driver" section options that hook specific
-outputs to specific "Monitor" sections in the file. The option:
-section of the form:
-
- Option "monitor-VGA" "My VGA Monitor"
-
-connects the VGA output of this driver to the "Monitor" section with
-Identifier "My VGA Monitor". All of the usual monitor options can now be
-placed in that "Monitor" section and will be applied to the VGA output
-configuration.
diff --git a/xorg-server/hw/xfree86/doc/devel/Makefile.in b/xorg-server/hw/xfree86/doc/devel/Makefile.in
index c3776b573..754c3f2d5 100644
--- a/xorg-server/hw/xfree86/doc/devel/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/devel/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -240,8 +240,11 @@ SHELL = @SHELL@
SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
STRIP = @STRIP@
+SYSCONFDIR = @SYSCONFDIR@
TSLIB_CFLAGS = @TSLIB_CFLAGS@
TSLIB_LIBS = @TSLIB_LIBS@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
VERSION = @VERSION@
@@ -301,6 +304,7 @@ XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
+__XCONFIGDIR__ = @__XCONFIGDIR__@
__XCONFIGFILE__ = @__XCONFIGFILE__@
abi_ansic = @abi_ansic@
abi_extension = @abi_extension@
diff --git a/xorg-server/hw/xfree86/doc/man/Makefile.in b/xorg-server/hw/xfree86/doc/man/Makefile.in
index 992f16cc3..61bb2cc5a 100644
--- a/xorg-server/hw/xfree86/doc/man/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/man/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -266,8 +266,11 @@ SHELL = @SHELL@
SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
STRIP = @STRIP@
+SYSCONFDIR = @SYSCONFDIR@
TSLIB_CFLAGS = @TSLIB_CFLAGS@
TSLIB_LIBS = @TSLIB_LIBS@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
VERSION = @VERSION@
@@ -327,6 +330,7 @@ XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
+__XCONFIGDIR__ = @__XCONFIGDIR__@
__XCONFIGFILE__ = @__XCONFIGFILE__@
abi_ansic = @abi_ansic@
abi_extension = @abi_extension@
@@ -428,7 +432,9 @@ MANDEFS = \
-D__adminmansuffix__=$(ADMIN_MAN_SUFFIX) \
-D__mandir__=$(mandir) \
-D__projectroot__=$(prefix) \
- -D__xconfigfile__=$(__XCONFIGFILE__) -D__xconfigdir__=$(XCONFIGDIR) \
+ -D__datadir__=$(datadir) \
+ -D__xconfigfile__=$(__XCONFIGFILE__) \
+ -D__xconfigdir__=$(__XCONFIGDIR__) \
-D__xkbdir__=$(XKB_BASE_DIRECTORY) \
-D__modulepath__="$(DEFAULT_MODULE_PATH)" \
-D__xlogfile__=$(XLOGFILE) -D__xservername__=$(XSERVERNAME)
diff --git a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
index 222530b41..c8a3c3ac2 100644
--- a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
+++ b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
@@ -1021,7 +1021,7 @@ The
entry specifies the name of the driver to use for this input device.
After all classes have been examined, the
.RI \*q inputdriver \*q
-module from the final
+module from the first
.B Driver
entry will be enabled when using the loadable server.
.PP
@@ -1039,17 +1039,29 @@ The allowed matching entries are shown below.
.BI "MatchProduct \*q" matchproduct \*q
This entry can be used to check if the substring
.RI \*q matchproduct \*q
-occurs in the device's product name.
+occurs in the device's product name. Multiple substrings can be matched by
+separating arguments with a '|' character.
.TP 7
.BI "MatchVendor \*q" matchvendor \*q
This entry can be used to check if the substring
.RI \*q matchvendor \*q
-occurs in the device's vendor name.
+occurs in the device's vendor name. Multiple substrings can be matched by
+separating arguments with a '|' character.
.TP 7
.BI "MatchDevicePath \*q" matchdevice \*q
This entry can be used to check if the device file matches the
.RI \*q matchdevice \*q
-pathname pattern.
+pathname pattern. Multiple patterns can be matched by separating arguments
+with a '|' character.
+.TP 7
+.BI "MatchTag \*q" matchtag \*q
+This entry can be used to check if tags assigned by the config backend
+matches the
+.RI \*q matchtag \*q
+pattern. Multiple patterns can be matched by separating arguments
+with a '|' character. A match is found if at least one of the tags given in
+.RI \*q matchtag \*q
+matches at least one of the tags assigned by the backend.
.TP 7
.BI "MatchIsKeyboard \*q" bool \*q
.TP 7
@@ -1070,11 +1082,20 @@ When an input device has been matched to the
.B InputClass
section, any
.B Option
-entries are applied to the device. See the
+entries are applied to the device. One
+.B InputClass
+specific
+.B Option
+is recognized. See the
.B InputDevice
-section above for a description of the various
+section above for a description of the remaining
.B Option
entries.
+.TP 7
+.BI "Option \*qIgnore\*q \*q" boolean \*q
+This optional entry specifies that the device should be ignored entirely,
+and not added to the server. This can be useful when the device is handled
+by another program and no X events should be generated.
.SH "DEVICE SECTION"
The config file may have multiple
.B Device
diff --git a/xorg-server/hw/xfree86/doc/sgml/Makefile.in b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
index 0fb1a10ce..8f2b24e3f 100644
--- a/xorg-server/hw/xfree86/doc/sgml/Makefile.in
+++ b/xorg-server/hw/xfree86/doc/sgml/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -260,8 +260,11 @@ SHELL = @SHELL@
SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
STRIP = @STRIP@
+SYSCONFDIR = @SYSCONFDIR@
TSLIB_CFLAGS = @TSLIB_CFLAGS@
TSLIB_LIBS = @TSLIB_LIBS@
+UDEV_CFLAGS = @UDEV_CFLAGS@
+UDEV_LIBS = @UDEV_LIBS@
UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
VERSION = @VERSION@
@@ -321,6 +324,7 @@ XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
+__XCONFIGDIR__ = @__XCONFIGDIR__@
__XCONFIGFILE__ = @__XCONFIGFILE__@
abi_ansic = @abi_ansic@
abi_extension = @abi_extension@