Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 301 insertions, 0 deletions

diff --git a/xorg-server/hw/xfree86/modes/xf86cvt.c b/xorg-server/hw/xfree86/modes/xf86cvt.c
new file mode 100644
index 000000000..e9c74aa62
--- /dev/null
+++ b/xorg-server/hw/xfree86/modes/xf86cvt.c
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2005-2006 Luc Verhaegen.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The reason for having this function in a file of its own is
+ * so that ../utils/cvt/cvt can link to it, and that xf86CVTMode
+ * code is shared directly.
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#else
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#endif
+
+#include "xf86.h"
+#include "xf86Modes.h"
+
+#include <string.h>
+
+/*
+ * Generate a CVT standard mode from HDisplay, VDisplay and VRefresh.
+ *
+ * These calculations are stolen from the CVT calculation spreadsheet written
+ * by Graham Loveridge. He seems to be claiming no copyright and there seems to
+ * be no license attached to this. He apparently just wants to see his name
+ * mentioned.
+ *
+ * This file can be found at http://www.vesa.org/Public/CVT/CVTd6r1.xls
+ *
+ * Comments and structure corresponds to the comments and structure of the xls.
+ * This should ease importing of future changes to the standard (not very
+ * likely though).
+ *
+ * About margins; i'm sure that they are to be the bit between HDisplay and
+ * HBlankStart, HBlankEnd and HTotal, VDisplay and VBlankStart, VBlankEnd and 
+ * VTotal, where the overscan colour is shown. FB seems to call _all_ blanking
+ * outside sync "margin" for some reason. Since we prefer seeing proper
+ * blanking instead of the overscan colour, and since the Crtc* values will
+ * probably get altered after us, we will disable margins altogether. With
+ * these calculations, Margins will plainly expand H/VDisplay, and we don't
+ * want that. -- libv
+ *
+ */
+_X_EXPORT DisplayModePtr
+xf86CVTMode(int HDisplay, int VDisplay, float VRefresh, Bool Reduced,
+	    Bool Interlaced)
+{
+    DisplayModeRec  *Mode = xnfcalloc(1, sizeof(DisplayModeRec));
+
+    /* 1) top/bottom margin size (% of height) - default: 1.8 */
+#define CVT_MARGIN_PERCENTAGE 1.8    
+
+    /* 2) character cell horizontal granularity (pixels) - default 8 */
+#define CVT_H_GRANULARITY 8
+
+    /* 4) Minimum vertical porch (lines) - default 3 */
+#define CVT_MIN_V_PORCH 3
+
+    /* 4) Minimum number of vertical back porch lines - default 6 */
+#define CVT_MIN_V_BPORCH 6
+
+    /* Pixel Clock step (kHz) */
+#define CVT_CLOCK_STEP 250
+
+    Bool Margins = FALSE;
+    float  VFieldRate, HPeriod;
+    int  HDisplayRnd, HMargin;
+    int  VDisplayRnd, VMargin, VSync;
+    float  Interlace; /* Please rename this */
+
+    /* CVT default is 60.0Hz */
+    if (!VRefresh)
+        VRefresh = 60.0;
+
+    /* 1. Required field rate */
+    if (Interlaced)
+        VFieldRate = VRefresh * 2;
+    else
+        VFieldRate = VRefresh;
+
+    /* 2. Horizontal pixels */
+    HDisplayRnd = HDisplay - (HDisplay % CVT_H_GRANULARITY);
+
+    /* 3. Determine left and right borders */
+    if (Margins) {
+        /* right margin is actually exactly the same as left */
+        HMargin = (((float) HDisplayRnd) * CVT_MARGIN_PERCENTAGE / 100.0);
+        HMargin -= HMargin % CVT_H_GRANULARITY;
+    } else
+        HMargin = 0;
+
+    /* 4. Find total active pixels */
+    Mode->HDisplay = HDisplayRnd + 2*HMargin;
+
+    /* 5. Find number of lines per field */
+    if (Interlaced)
+        VDisplayRnd = VDisplay / 2;
+    else
+        VDisplayRnd = VDisplay;
+
+    /* 6. Find top and bottom margins */
+    /* nope. */
+    if (Margins)
+        /* top and bottom margins are equal again. */
+        VMargin = (((float) VDisplayRnd) * CVT_MARGIN_PERCENTAGE / 100.0);
+    else
+        VMargin = 0;
+
+    Mode->VDisplay = VDisplay + 2*VMargin;
+
+    /* 7. Interlace */
+    if (Interlaced)
+        Interlace = 0.5;
+    else
+        Interlace = 0.0;
+
+    /* Determine VSync Width from aspect ratio */
+    if (!(VDisplay % 3) && ((VDisplay * 4 / 3) == HDisplay))
+        VSync = 4;
+    else if (!(VDisplay % 9) && ((VDisplay * 16 / 9) == HDisplay))
+        VSync = 5;
+    else if (!(VDisplay % 10) && ((VDisplay * 16 / 10) == HDisplay))
+        VSync = 6;
+    else if (!(VDisplay % 4) && ((VDisplay * 5 / 4) == HDisplay))
+        VSync = 7;
+    else if (!(VDisplay % 9) && ((VDisplay * 15 / 9) == HDisplay))
+        VSync = 7;
+    else /* Custom */
+        VSync = 10;
+
+    if (!Reduced) { /* simplified GTF calculation */
+
+        /* 4) Minimum time of vertical sync + back porch interval (µs) 
+         * default 550.0 */
+#define CVT_MIN_VSYNC_BP 550.0
+
+        /* 3) Nominal HSync width (% of line period) - default 8 */
+#define CVT_HSYNC_PERCENTAGE 8
+
+        float  HBlankPercentage;
+        int  VSyncAndBackPorch, VBackPorch;
+        int  HBlank;
+
+        /* 8. Estimated Horizontal period */
+        HPeriod = ((float) (1000000.0 / VFieldRate - CVT_MIN_VSYNC_BP)) / 
+            (VDisplayRnd + 2 * VMargin + CVT_MIN_V_PORCH + Interlace);
+
+        /* 9. Find number of lines in sync + backporch */
+        if (((int)(CVT_MIN_VSYNC_BP / HPeriod) + 1) < (VSync + CVT_MIN_V_PORCH))
+            VSyncAndBackPorch = VSync + CVT_MIN_V_PORCH;
+        else
+            VSyncAndBackPorch = (int)(CVT_MIN_VSYNC_BP / HPeriod) + 1;
+
+        /* 10. Find number of lines in back porch */
+        VBackPorch = VSyncAndBackPorch - VSync;
+
+        /* 11. Find total number of lines in vertical field */
+        Mode->VTotal = VDisplayRnd + 2 * VMargin + VSyncAndBackPorch + Interlace
+            + CVT_MIN_V_PORCH;
+
+        /* 5) Definition of Horizontal blanking time limitation */
+        /* Gradient (%/kHz) - default 600 */
+#define CVT_M_FACTOR 600
+
+        /* Offset (%) - default 40 */
+#define CVT_C_FACTOR 40
+
+        /* Blanking time scaling factor - default 128 */
+#define CVT_K_FACTOR 128
+
+        /* Scaling factor weighting - default 20 */
+#define CVT_J_FACTOR 20
+
+#define CVT_M_PRIME CVT_M_FACTOR * CVT_K_FACTOR / 256
+#define CVT_C_PRIME (CVT_C_FACTOR - CVT_J_FACTOR) * CVT_K_FACTOR / 256 + \
+        CVT_J_FACTOR
+
+        /* 12. Find ideal blanking duty cycle from formula */
+        HBlankPercentage = CVT_C_PRIME - CVT_M_PRIME * HPeriod/1000.0;
+
+        /* 13. Blanking time */
+        if (HBlankPercentage < 20)
+            HBlankPercentage = 20;
+
+        HBlank = Mode->HDisplay * HBlankPercentage/(100.0 - HBlankPercentage);
+        HBlank -= HBlank % (2*CVT_H_GRANULARITY);
+        
+        /* 14. Find total number of pixels in a line. */
+        Mode->HTotal = Mode->HDisplay + HBlank;
+
+        /* Fill in HSync values */
+        Mode->HSyncEnd = Mode->HDisplay + HBlank / 2;
+
+        Mode->HSyncStart = Mode->HSyncEnd - 
+            (Mode->HTotal * CVT_HSYNC_PERCENTAGE) / 100;
+        Mode->HSyncStart += CVT_H_GRANULARITY - 
+            Mode->HSyncStart % CVT_H_GRANULARITY;
+
+        /* Fill in VSync values */
+        Mode->VSyncStart = Mode->VDisplay + CVT_MIN_V_PORCH;
+        Mode->VSyncEnd = Mode->VSyncStart + VSync;
+
+    } else { /* Reduced blanking */
+        /* Minimum vertical blanking interval time (µs) - default 460 */
+#define CVT_RB_MIN_VBLANK 460.0
+
+        /* Fixed number of clocks for horizontal sync */
+#define CVT_RB_H_SYNC 32.0
+
+        /* Fixed number of clocks for horizontal blanking */
+#define CVT_RB_H_BLANK 160.0
+
+        /* Fixed number of lines for vertical front porch - default 3 */
+#define CVT_RB_VFPORCH 3
+
+        int  VBILines;
+
+        /* 8. Estimate Horizontal period. */
+        HPeriod = ((float) (1000000.0 / VFieldRate - CVT_RB_MIN_VBLANK)) / 
+            (VDisplayRnd + 2*VMargin);
+
+        /* 9. Find number of lines in vertical blanking */
+        VBILines = ((float) CVT_RB_MIN_VBLANK) / HPeriod + 1;
+
+        /* 10. Check if vertical blanking is sufficient */
+        if (VBILines < (CVT_RB_VFPORCH + VSync + CVT_MIN_V_BPORCH))
+            VBILines = CVT_RB_VFPORCH + VSync + CVT_MIN_V_BPORCH;
+        
+        /* 11. Find total number of lines in vertical field */
+        Mode->VTotal = VDisplayRnd + 2 * VMargin + Interlace + VBILines;
+
+        /* 12. Find total number of pixels in a line */
+        Mode->HTotal = Mode->HDisplay + CVT_RB_H_BLANK;
+
+        /* Fill in HSync values */
+        Mode->HSyncEnd = Mode->HDisplay + CVT_RB_H_BLANK / 2;
+        Mode->HSyncStart = Mode->HSyncEnd - CVT_RB_H_SYNC;
+
+        /* Fill in VSync values */
+        Mode->VSyncStart = Mode->VDisplay + CVT_RB_VFPORCH;
+        Mode->VSyncEnd = Mode->VSyncStart + VSync;
+    }
+
+    /* 15/13. Find pixel clock frequency (kHz for xf86) */
+    Mode->Clock = Mode->HTotal * 1000.0 / HPeriod;
+    Mode->Clock -= Mode->Clock % CVT_CLOCK_STEP;
+
+    /* 16/14. Find actual Horizontal Frequency (kHz) */
+    Mode->HSync = ((float) Mode->Clock) / ((float) Mode->HTotal);
+
+    /* 17/15. Find actual Field rate */
+    Mode->VRefresh = (1000.0 * ((float) Mode->Clock)) / 
+        ((float) (Mode->HTotal * Mode->VTotal));
+
+    /* 18/16. Find actual vertical frame frequency */
+    /* ignore - just set the mode flag for interlaced */
+    if (Interlaced)
+        Mode->VTotal *= 2;
+
+    {
+        char  Name[256];
+        Name[0] = 0;
+
+        snprintf(Name, 256, "%dx%d", HDisplay, VDisplay);
+
+        Mode->name = xnfalloc(strlen(Name) + 1);
+        memcpy(Mode->name, Name, strlen(Name) + 1);
+    }
+
+    if (Reduced)
+        Mode->Flags |= V_PHSYNC | V_NVSYNC;
+    else
+        Mode->Flags |= V_NHSYNC | V_PVSYNC;
+
+    if (Interlaced)
+        Mode->Flags |= V_INTERLACE;
+
+    return Mode;
+}