Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

7 files changed, 1641 insertions, 0 deletions

diff --git a/xorg-server/hw/xfree86/os-support/sco/Makefile.am b/xorg-server/hw/xfree86/os-support/sco/Makefile.am
new file mode 100644
index 000000000..9cb5011fb
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/Makefile.am
@@ -0,0 +1,6 @@
+EXTRA_DIST = \
+	VTsw_sco.c \
+	sco_init.c \
+	sco_iop.c \
+	sco_mouse.c \
+	sco_video.c
diff --git a/xorg-server/hw/xfree86/os-support/sco/Makefile.in b/xorg-server/hw/xfree86/os-support/sco/Makefile.in
new file mode 100644
index 000000000..a417e9a94
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/Makefile.in
@@ -0,0 +1,538 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = hw/xfree86/os-support/sco
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
+	$(top_builddir)/include/xorg-server.h \
+	$(top_builddir)/include/dix-config.h \
+	$(top_builddir)/include/xgl-config.h \
+	$(top_builddir)/include/xorg-config.h \
+	$(top_builddir)/include/xkb-config.h \
+	$(top_builddir)/include/xwin-config.h \
+	$(top_builddir)/include/kdrive-config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+APPDEFAULTDIR = @APPDEFAULTDIR@
+APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASE_FONT_PATH = @BASE_FONT_PATH@
+BUILD_DATE = @BUILD_DATE@
+BUILD_TIME = @BUILD_TIME@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DARWIN_LIBS = @DARWIN_LIBS@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFAULT_LIBRARY_PATH = @DEFAULT_LIBRARY_PATH@
+DEFAULT_LOGPREFIX = @DEFAULT_LOGPREFIX@
+DEFAULT_MODULE_PATH = @DEFAULT_MODULE_PATH@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DGA_CFLAGS = @DGA_CFLAGS@
+DGA_LIBS = @DGA_LIBS@
+DIX_CFLAGS = @DIX_CFLAGS@
+DLLTOOL = @DLLTOOL@
+DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
+DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
+DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
+DMXMODULES_LIBS = @DMXMODULES_LIBS@
+DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@
+DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@
+DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@
+DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@
+DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
+DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
+DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@
+DRIPROTO_LIBS = @DRIPROTO_LIBS@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
+DRI_DRIVER_PATH = @DRI_DRIVER_PATH@
+DSYMUTIL = @DSYMUTIL@
+DTRACE = @DTRACE@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
+FREETYPE_LIBS = @FREETYPE_LIBS@
+GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
+GLX_DEFINES = @GLX_DEFINES@
+GL_CFLAGS = @GL_CFLAGS@
+GL_LIBS = @GL_LIBS@
+GREP = @GREP@
+HAL_CFLAGS = @HAL_CFLAGS@
+HAL_LIBS = @HAL_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KDRIVE_CFLAGS = @KDRIVE_CFLAGS@
+KDRIVE_INCS = @KDRIVE_INCS@
+KDRIVE_LIBS = @KDRIVE_LIBS@
+KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@
+KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@
+KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@
+LAUNCHD = @LAUNCHD@
+LDFLAGS = @LDFLAGS@
+LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
+LIBDRM_LIBS = @LIBDRM_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
+LINUXDOC = @LINUXDOC@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKE_HTML = @MAKE_HTML@
+MAKE_PDF = @MAKE_PDF@
+MAKE_PS = @MAKE_PS@
+MAKE_TEXT = @MAKE_TEXT@
+MESA_SOURCE = @MESA_SOURCE@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
+MKFONTDIR = @MKFONTDIR@
+MKFONTSCALE = @MKFONTSCALE@
+NMEDIT = @NMEDIT@
+OBJC = @OBJC@
+OBJCCLD = @OBJCCLD@
+OBJCDEPMODE = @OBJCDEPMODE@
+OBJCFLAGS = @OBJCFLAGS@
+OBJCLINK = @OBJCLINK@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
+PCIACCESS_LIBS = @PCIACCESS_LIBS@
+PCI_TXT_IDS_PATH = @PCI_TXT_IDS_PATH@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PROJECTROOT = @PROJECTROOT@
+PS2PDF = @PS2PDF@
+RANLIB = @RANLIB@
+RAWCPP = @RAWCPP@
+RAWCPPFLAGS = @RAWCPPFLAGS@
+SED = @SED@
+SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
+SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
+STRIP = @STRIP@
+TSLIB_CFLAGS = @TSLIB_CFLAGS@
+TSLIB_LIBS = @TSLIB_LIBS@
+UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
+VENDOR_MAN_VERSION = @VENDOR_MAN_VERSION@
+VENDOR_NAME = @VENDOR_NAME@
+VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
+VENDOR_RELEASE = @VENDOR_RELEASE@
+VERSION = @VERSION@
+X11APP_ARCHS = @X11APP_ARCHS@
+X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@
+X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@
+XDMCP_CFLAGS = @XDMCP_CFLAGS@
+XDMCP_LIBS = @XDMCP_LIBS@
+XDMXCONFIG_DEP_CFLAGS = @XDMXCONFIG_DEP_CFLAGS@
+XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@
+XDMX_CFLAGS = @XDMX_CFLAGS@
+XDMX_LIBS = @XDMX_LIBS@
+XDMX_SYS_LIBS = @XDMX_SYS_LIBS@
+XEGLMODULES_CFLAGS = @XEGLMODULES_CFLAGS@
+XEGL_LIBS = @XEGL_LIBS@
+XEGL_SYS_LIBS = @XEGL_SYS_LIBS@
+XEPHYR_CFLAGS = @XEPHYR_CFLAGS@
+XEPHYR_DRI_LIBS = @XEPHYR_DRI_LIBS@
+XEPHYR_INCS = @XEPHYR_INCS@
+XEPHYR_LIBS = @XEPHYR_LIBS@
+XF86CONFIGFILE = @XF86CONFIGFILE@
+XF86MISC_CFLAGS = @XF86MISC_CFLAGS@
+XF86MISC_LIBS = @XF86MISC_LIBS@
+XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@
+XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@
+XGLMODULES_CFLAGS = @XGLMODULES_CFLAGS@
+XGLMODULES_LIBS = @XGLMODULES_LIBS@
+XGLXMODULES_CFLAGS = @XGLXMODULES_CFLAGS@
+XGLXMODULES_LIBS = @XGLXMODULES_LIBS@
+XGLX_LIBS = @XGLX_LIBS@
+XGLX_SYS_LIBS = @XGLX_SYS_LIBS@
+XGL_LIBS = @XGL_LIBS@
+XGL_MODULE_PATH = @XGL_MODULE_PATH@
+XGL_SYS_LIBS = @XGL_SYS_LIBS@
+XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@
+XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@
+XKB_COMPILED_DIR = @XKB_COMPILED_DIR@
+XKM_OUTPUT_DIR = @XKM_OUTPUT_DIR@
+XLIB_CFLAGS = @XLIB_CFLAGS@
+XLIB_LIBS = @XLIB_LIBS@
+XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@
+XNESTMODULES_LIBS = @XNESTMODULES_LIBS@
+XNEST_LIBS = @XNEST_LIBS@
+XNEST_SYS_LIBS = @XNEST_SYS_LIBS@
+XORGCFG_DEP_CFLAGS = @XORGCFG_DEP_CFLAGS@
+XORGCFG_DEP_LIBS = @XORGCFG_DEP_LIBS@
+XORGCONFIG_DEP_CFLAGS = @XORGCONFIG_DEP_CFLAGS@
+XORGCONFIG_DEP_LIBS = @XORGCONFIG_DEP_LIBS@
+XORG_CFLAGS = @XORG_CFLAGS@
+XORG_INCS = @XORG_INCS@
+XORG_LIBS = @XORG_LIBS@
+XORG_MODULES_CFLAGS = @XORG_MODULES_CFLAGS@
+XORG_MODULES_LIBS = @XORG_MODULES_LIBS@
+XORG_OS = @XORG_OS@
+XORG_OS_SUBDIR = @XORG_OS_SUBDIR@
+XORG_SYS_LIBS = @XORG_SYS_LIBS@
+XPRINTMODULES_CFLAGS = @XPRINTMODULES_CFLAGS@
+XPRINTMODULES_LIBS = @XPRINTMODULES_LIBS@
+XPRINTPROTO_CFLAGS = @XPRINTPROTO_CFLAGS@
+XPRINTPROTO_LIBS = @XPRINTPROTO_LIBS@
+XPRINT_CFLAGS = @XPRINT_CFLAGS@
+XPRINT_LIBS = @XPRINT_LIBS@
+XPRINT_SYS_LIBS = @XPRINT_SYS_LIBS@
+XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@
+XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@
+XSDL_INCS = @XSDL_INCS@
+XSDL_LIBS = @XSDL_LIBS@
+XSERVERCFLAGS_CFLAGS = @XSERVERCFLAGS_CFLAGS@
+XSERVERCFLAGS_LIBS = @XSERVERCFLAGS_LIBS@
+XSERVERLIBS_CFLAGS = @XSERVERLIBS_CFLAGS@
+XSERVERLIBS_LIBS = @XSERVERLIBS_LIBS@
+XSERVER_LIBS = @XSERVER_LIBS@
+XSERVER_SYS_LIBS = @XSERVER_SYS_LIBS@
+XTSTEXAMPLES_DEP_CFLAGS = @XTSTEXAMPLES_DEP_CFLAGS@
+XTSTEXAMPLES_DEP_LIBS = @XTSTEXAMPLES_DEP_LIBS@
+XVFB_LIBS = @XVFB_LIBS@
+XVFB_SYS_LIBS = @XVFB_SYS_LIBS@
+XWINMODULES_CFLAGS = @XWINMODULES_CFLAGS@
+XWINMODULES_LIBS = @XWINMODULES_LIBS@
+XWIN_LIBS = @XWIN_LIBS@
+XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
+XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+__XCONFIGFILE__ = @__XCONFIGFILE__@
+abi_ansic = @abi_ansic@
+abi_extension = @abi_extension@
+abi_font = @abi_font@
+abi_videodrv = @abi_videodrv@
+abi_xinput = @abi_xinput@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+driverdir = @driverdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+extdir = @extdir@
+ft_config = @ft_config@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+launchagentsdir = @launchagentsdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sdkdir = @sdkdir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xglmoduledir = @xglmoduledir@
+xpconfigdir = @xpconfigdir@
+EXTRA_DIST = \
+	VTsw_sco.c \
+	sco_init.c \
+	sco_iop.c \
+	sco_mouse.c \
+	sco_video.c
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/os-support/sco/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  hw/xfree86/os-support/sco/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/xorg-server/hw/xfree86/os-support/sco/VTsw_sco.c b/xorg-server/hw/xfree86/os-support/sco/VTsw_sco.c
new file mode 100644
index 000000000..d126e7869
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/VTsw_sco.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 1993 by David Wexelblat <dwex@goblin.org>
+ * Copyright 1993 by David McCullough <davidm@stallion.oz.au>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of David Wexelblat not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  David Wexelblat makes no representations
+ * about the suitability of this software for any purpose.  It is provided
+ * "as is" without express or implied warranty.
+ *
+ * DAVID WEXELBLAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL DAVID WEXELBLAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86_OSlib.h"
+
+/* For the event driver prototypes */
+#include <sys/event.h>
+#include <mouse.h>
+
+/*
+ * Handle the VT-switching interface for SCO
+ */
+
+/*
+ * This function is the signal handler for the VT-switching signal.  It
+ * is only referenced inside the OS-support layer. NOTE: we do NOT need
+ * to re-arm the signal here, since we used sigaction() to set the signal
+ * disposition in sco_init.c. If we had used signal(), we would need to
+ * re-arm the signal here. All we need to do now is record the fact that
+ * we got the signal. XFree86 handles the rest.
+ */
+void
+xf86VTRequest(int sig)
+{
+  xf86Info.vtRequestsPending = TRUE;
+  return;
+}
+
+Bool
+xf86VTSwitchPending(void)
+{
+  return(xf86Info.vtRequestsPending ? TRUE : FALSE);
+}
+
+/*
+ * When we switch away, we need to flush and suspend the event driver
+ * before the VT_RELDISP. We also need to get the current LED status
+ * and preserve it, so that we can restore it when we come back.
+ */
+static int sco_ledstatus = -1;
+static unsigned int sco_ledstate = 0;
+
+Bool
+xf86VTSwitchAway(void)
+{
+  ev_flush();
+  ev_suspend();
+
+  sco_ledstatus = ioctl(xf86Info.consoleFd, KDGETLED, &sco_ledstate);
+
+  xf86Info.vtRequestsPending = FALSE;
+  if (ioctl(xf86Info.consoleFd, VT_RELDISP, VT_TRUE) < 0) {
+    return(FALSE);
+  } else {
+    return(TRUE);
+  }
+}
+
+/*
+ * When we come back to the X server, we need to resume the event driver,
+ * and we need to restore the LED settings to what they were when we
+ * switched away.
+ */
+Bool
+xf86VTSwitchTo(void)
+{
+  ev_resume();
+
+  xf86Info.vtRequestsPending = FALSE;
+  if (ioctl(xf86Info.consoleFd, VT_RELDISP, VT_ACKACQ) < 0) {
+    return(FALSE);
+  } else {
+    if (sco_ledstatus >= 0) {
+      ioctl (xf86Info.consoleFd, KDSETLED, sco_ledstate);
+    }
+    sco_ledstatus = -1;
+
+    /*
+     * Convince the console driver this screen is in graphics mode,
+     * otherwise it assumes it can do more to the screen than it should.
+     */
+    if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_GRAPHICS) < 0) {
+        ErrorF("Failed to set graphics mode (%s)\n", strerror(errno));
+    }
+
+    return TRUE;
+  }
+}
diff --git a/xorg-server/hw/xfree86/os-support/sco/sco_init.c b/xorg-server/hw/xfree86/os-support/sco/sco_init.c
new file mode 100644
index 000000000..5f7db3437
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/sco_init.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright 2001-2005 by J. Kean Johnston <jkj@sco.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name J. Kean Johnston not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  J. Kean Johnston makes no
+ * representations about the suitability of this software for any purpose.
+ * It is provided "as is" without express or implied warranty.
+ *
+ * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* Re-written May 2001 to represent the current state of reality */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+#include <X11/Xmd.h>
+
+#include "compiler.h"
+
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86_OSlib.h"
+
+static Bool KeepTty = FALSE;
+static int VTnum = -1;
+static char vtdevice[48];
+static int sco_console_mode = -1;
+
+extern Bool mpxLock;
+
+void
+xf86OpenConsole(void)
+{
+  int i, ioctl_ret;
+  struct vt_mode VT;
+  struct vid_info vidinf;
+  struct sigaction sigvtsw;
+  char *ttn;
+
+  if (serverGeneration == 1) {
+    /* check if we're run with euid==0 */
+    if (geteuid() != 0) {
+      FatalError("xf86OpenConsole: Server must be setuid root\n");
+    }
+
+    /* If we are run in the background we will get SIGTTOU. Ignore it. */
+    OsSignal (SIGTTOU, SIG_IGN);
+
+    /*
+     * Set up the virtual terminal (multiscreen in SCO parlance).
+     * For the actual console itself, screens are numbered from
+     * 1 to (usually) 16. However, it is possible to have a nested
+     * server, and it is also possible to be on a multi-console
+     * system such as MaxSpeed or SunRiver. Therefore, we should
+     * not make any assumptions about the TTY name we are on, and
+     * instead we rely on ttyname() to give us the real TTY name.
+     * Previously, we tried to determine the TTY name manually.
+     * This is wrong. The only time we need to futz with the TTY name
+     * is if we were given the name of a TTY to run on explicity on
+     * the command line.
+     */
+
+    if (VTnum == -1) {
+      /*
+       * No device was specified. We need to query the kernel to see which
+       * console device we are on (and in fact if we are on a console at all).
+       */
+      ttn = ttyname (1);
+
+      if (ttn == (char *)0) {
+	FatalError ("xf86OpenConsole: Could not determine TTY name: %s\n",
+	  strerror(errno));
+      }
+      strlcpy (vtdevice, ttn, sizeof(vtdevice));
+    } else if (VTnum >= 0) {
+      snprintf (vtdevice, sizeof(vtdevice), "/dev/tty%02d", VTnum);
+    }
+
+    /*
+     * Now we can dispose of stdin/stdout
+     */
+    fclose (stdin);
+    fclose (stdout);
+
+    if ((xf86Info.consoleFd = open(vtdevice, O_RDWR | O_NDELAY, 0)) < 0) {
+      FatalError("xf86OpenConsole: Cannot open %s: %s\n", vtdevice,
+	strerror(errno));
+    }
+
+    /*
+     * We make 100% sure we use the correct VT number. This can get ugly
+     * where there are multi-consoles in use, so we make sure we query
+     * the kernel for the correct VT number. It knows best, we don't.
+     */
+    vidinf.size = sizeof(vidinf);
+    if (ioctl (xf86Info.consoleFd, CONS_GETINFO, &vidinf) < 0) {
+      FatalError ("xf86OpenConsole: %s not a console device "
+	"or error querying device: %s\n", vtdevice, strerror (errno));
+    }
+    xf86Info.vtno = vidinf.m_num;
+    VTnum = vidinf.m_num + 1; /* 0-based */
+
+    ErrorF("(using VT%02d device %s)\n\n", VTnum, vtdevice);
+
+    /* We activate the console just in case its not the one we are on */
+    if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) {
+        ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno));
+    }
+
+    /* Disassociate from controling TTY */
+    if (!KeepTty) {
+      setpgrp();
+    }
+
+    /*
+     * Now we get the current mode that the console device is in. We will
+     * use this later when we close the console device to restore it to
+     * that same mode.
+     */
+    if ((sco_console_mode = ioctl(xf86Info.consoleFd, CONS_GET, 0L)) < 0) {
+      FatalError("xf86OpenConsole: CONS_GET failed on console (%s)\n",
+          strerror(errno));
+    }
+
+    if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) {
+      FatalError("xf86OpenConsole: VT_GETMODE failed (%s)\n", strerror(errno));
+    }
+
+    sigvtsw.sa_handler = xf86VTRequest;
+    sigfillset(&sigvtsw.sa_mask);
+    sigvtsw.sa_flags = 0;
+
+    /* NOTE: Using sigaction means we dont have to re-arm the signal */
+    sigaction(SIGUSR1, &sigvtsw, NULL);
+
+    VT.mode = VT_PROCESS;
+    VT.relsig = SIGUSR1;
+    VT.acqsig = SIGUSR1;
+    VT.frsig = SIGINT;          /* Not implemented */
+    VT.waitv = 0;
+
+    /*
+     * The SCO X server tries the following call 5 times. Lets do the same
+     * thing. It shouldn't really be required but sometimes things take a
+     * while to settle down when switching screens. *helpless shrug* I know
+     * its sucks but ...
+     */
+
+    ioctl_ret = 0;
+    for (i = 0; i < 5; i++) {
+      ioctl_ret = ioctl(xf86Info.consoleFd, VT_SETMODE, &VT);
+      if (ioctl_ret >= 0)
+        break;
+      usleep(999999); /* Dont use nap() - it forces linking with -lx */
+    }
+
+    if (ioctl_ret < 0) {
+      FatalError("xf86OpenConsole: VT_SETMODE failed (%s)\n", strerror(errno));
+    }
+
+    /*
+     * Convince the console driver we are in graphics mode.
+     */
+    if (ioctl(xf86Info.consoleFd, KDSETMODE, KD_GRAPHICS) < 0) {
+        ErrorF("Failed to set graphics mode (%s)\n", strerror(errno));
+    }
+  } else { /* serverGeneration != 1 */
+    if (ioctl(xf86Info.consoleFd, VT_ACTIVATE, xf86Info.vtno) != 0) {
+      ErrorF("xf86OpenConsole: VT_ACTIVATE failed (%s)\n", strerror(errno));
+    }
+  }
+}
+
+/*
+ * Restore the console to its previous state. This may cause flicker if
+ * the screen was previous in a graphics mode, because we first set it
+ * to text mode. This has the advantage of getting the console driver
+ * to do a soft reset on the card, which really does help settle the
+ * video card down again after coming out of Xfree86.
+ */
+void
+xf86CloseConsole(void)
+{
+  struct vt_mode VT;
+  struct sigaction sigvtsw;
+
+  /* Set text mode (possibly briefly) */
+  ioctl(xf86Info.consoleFd, KDSETMODE, KD_TEXT0);
+
+  /* Restore the original mode */
+  if (sco_console_mode != -1) {
+      ioctl(xf86Info.consoleFd, MODESWITCH | sco_console_mode, 0L);
+  }
+
+  ioctl(xf86Info.consoleFd, VT_RELDISP, 1);     /* Release the display */
+
+  sigvtsw.sa_handler = SIG_DFL;
+  sigfillset(&sigvtsw.sa_mask);
+  sigvtsw.sa_flags = 0;
+
+  sigaction(SIGUSR1, &sigvtsw, NULL);
+
+  VT.mode = VT_AUTO;
+  VT.waitv = 0;
+  VT.relsig = SIGUSR1;
+  VT.acqsig = SIGUSR1;
+  VT.frsig  = SIGINT;
+  ioctl(xf86Info.consoleFd, VT_SETMODE, &VT); /* Revert to auto handling */
+
+  close(xf86Info.consoleFd); /* We're done with the device */
+}
+
+int
+xf86ProcessArgument(int argc, char *argv[], int i)
+{
+  /*
+   * Keep server from detaching from controlling tty.  This is useful
+   * when debugging (so the server can receive keyboard signals).
+   */
+  if (!strcmp(argv[i], "-keeptty")) {
+    KeepTty = TRUE;
+    return(1);
+  }
+
+  /*
+   * By default, the X server wants to bind itself to CPU 0. This makes
+   * sure that the server has full access to the I/O ports at IOPL 3.
+   * Some SMP systems have trouble with I/O on CPU's other than 0. If,
+   * however, you have a system that is well behaved, you can specify
+   * this argument and let the scheduler decide which CPU the server
+   * should run on.
+   */
+  if (!strcmp(argv[i], "-nompxlock")) {
+    mpxLock = FALSE;
+    return (1);
+  }
+
+  /*
+   * Specify the VT number to run on (NOT the device).
+   */
+  if ((argv[i][0] == 'v') && (argv[i][1] == 't')) {
+    if (sscanf(argv[i], "vt%2d", &VTnum) == 0) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    }
+    if (VTnum <= 0) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    }
+    return(1);
+  }
+
+  /*
+   * Use a device the user specifies.
+   */
+  if (!strcmp(argv[i], "-crt")) {
+    if (++i > argc) {
+      UseMsg();
+      VTnum = -1;
+      return(0);
+    } else {
+      VTnum = -2;
+      strlcpy (vtdevice, argv[i], sizeof(vtdevice));
+      return(2);
+    }
+  }
+  return(0);
+}
+
+void
+xf86UseMsg(void)
+{
+	ErrorF("vtXX                   use the specified VT number\n");
+	ErrorF("-crt DEVICE            use the specified VT device\n");
+        ErrorF("-nompxlock             dont bind X server to CPU 0\n");
+	ErrorF("-keeptty               ");
+	ErrorF("don't detach controlling tty (for debugging only)\n");
+}
diff --git a/xorg-server/hw/xfree86/os-support/sco/sco_iop.c b/xorg-server/hw/xfree86/os-support/sco/sco_iop.c
new file mode 100644
index 000000000..bb8d06d2e
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/sco_iop.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2001 by J. Kean Johnston <jkj@caldera.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name J. Kean Johnston not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  J. Kean Johnston makes no
+ * representations about the suitability of this software for any purpose.
+ * It is provided "as is" without express or implied warranty.
+ *
+ * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+
+#include "compiler.h"
+
+#define _NEED_SYSI86
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86OSpriv.h"
+#include "xf86_OSlib.h"
+
+
+/***************************************************************************/
+/* I/O Permissions section                                                 */
+/***************************************************************************/
+
+/*
+ * There is a right way and a wrong way of doing this. Unfortunately, we
+ * are forced to do it the wrong way. The right way is to be told the range
+ * or ranges of I/O ports the driver(s) need access to, in order to use the
+ * CONS_IOPERM ioctl() to grant access only to those ports we care about.
+ * This way we can guarantee some small level of stability because a driver
+ * does not have access to all ports (which would mean it could play with
+ * the PIT and thus affect scheduling times, or a whole slew of other
+ * nasty things). However, because XFree86 currently only enables or disables
+ * ALL port access, we need to run at IOPL 3, which basically means the
+ * X Server runs at the same level as the kernel. You can image why this is
+ * unsafe. Oh, and this is not a problem unique to OSR5, other OSes are
+ * affected by this as well.
+ *
+ * So, for the time being, we change our IOPL until such time as the XFree86
+ * architecture is changed to allow for tighter control of I/O ports. If and
+ * when it is, then the CONS_ADDIOP/DELIOP ioctl() should be used to enable 
+ * or disable access to the desired ports.
+ */
+
+extern long sysi86 (int cmd, ...);
+
+static Bool IOEnabled = FALSE;
+
+_X_EXPORT Bool
+xf86EnableIO(void)
+{
+	if (IOEnabled)
+		return TRUE;
+
+	if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) < 0) {
+		xf86Msg(X_WARNING,"Failed to set IOPL for extended I/O\n");
+		return FALSE;
+	}
+	
+	IOEnabled = TRUE;
+	return TRUE;
+}
+
+_X_EXPORT void
+xf86DisableIO(void)
+{
+	if (!IOEnabled)
+		return;
+
+	sysi86(SI86V86, V86SC_IOPL, 0);
+	IOEnabled = FALSE;
+}
+
+/***************************************************************************/
+/* Interrupt Handling section                                              */
+/***************************************************************************/
+
+_X_EXPORT Bool
+xf86DisableInterrupts(void)
+{
+  if (!IOEnabled) {
+    if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) < 0)
+      return FALSE;
+  }
+
+#ifdef __GNUC__
+  __asm__ __volatile__("cli");
+#else 
+  asm("cli");
+#endif /* __GNUC__ */
+
+  if (!IOEnabled) {
+    sysi86(SI86V86, V86SC_IOPL, PS_IOPL);
+  }
+
+  return(TRUE);
+}
+
+_X_EXPORT void
+xf86EnableInterrupts(void)
+{
+  if (!IOEnabled) {
+    if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) < 0)
+      return;
+  }
+
+#ifdef __GNUC__
+  __asm__ __volatile__("sti");
+#else 
+  asm("sti");
+#endif /* __GNUC__ */
+
+  if (!IOEnabled) {
+    sysi86(SI86V86, V86SC_IOPL, PS_IOPL);
+  }
+}
diff --git a/xorg-server/hw/xfree86/os-support/sco/sco_mouse.c b/xorg-server/hw/xfree86/os-support/sco/sco_mouse.c
new file mode 100644
index 000000000..af57cdedf
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/sco_mouse.c
@@ -0,0 +1,258 @@
+/*
+ * Copyright 2001 by J. Kean Johnston <jkj@sco.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name J. Kean Johnston not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  J. Kean Johnston makes no
+ * representations about the suitability of this software for any purpose.
+ * It is provided "as is" without express or implied warranty.
+ *
+ * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+#include "compiler.h"
+
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86_OSlib.h"
+#include "xf86Xinput.h"
+#include "xf86OSmouse.h"
+#include "mipointer.h"
+#include <sys/event.h>
+#include <mouse.h>
+
+static int
+SupportedInterfaces (void)
+{
+  return MSE_MISC;
+}
+
+static const char *internalNames[] = {
+  "OSMouse",
+  NULL
+};
+
+static const char **
+BuiltinNames (void)
+{
+  return internalNames;
+}
+
+static Bool
+CheckProtocol (const char *protocol)
+{
+  int i;
+
+  for (i = 0; internalNames[i]; i++) {
+    if (xf86NameCmp (protocol, internalNames[i]) == 0)
+      return TRUE;
+  }
+
+  return FALSE;
+}
+
+static const char *
+DefaultProtocol (void)
+{
+  return "OSMouse";
+}
+
+static const char *
+evtErrStr (int evterr)
+{
+  switch (evterr) {
+  case -1: return "error in config files";
+  case -2: return "no mouse devices to attach";
+  case -3: return "unable to open device";
+  case -4: return "unable to open event queue";
+  case -999: return "unable to initialize event driver";
+  default: return "unknown event driver error";
+  }
+}
+
+static int
+OsMouseProc (DeviceIntPtr pPointer, int what)
+{
+  InputInfoPtr pInfo;
+  MouseDevPtr pMse;
+  unsigned char map[9];
+  dmask_t dmask;
+  MessageType from = X_CONFIG;
+  int evi;
+
+  pInfo = pPointer->public.devicePrivate;
+  pMse = pInfo->private;
+  pMse->device = pPointer;
+
+  switch (what) {
+  case DEVICE_INIT: 
+    pPointer->public.on = FALSE;
+
+    dmask = D_ABS | D_REL | D_BUTTON;
+    if ((evi = ev_initf(xf86Info.consoleFd)) < 0) {
+      FatalError ("OsMouseProc: Event driver initialization failed (%s)\n",
+          evtErrStr(evi));
+    }
+    pInfo->fd = ev_open (&dmask);
+    if (pInfo->fd < 0) {
+      FatalError ("OsMouseProc: DEVICE_INIT failed (%s)\n", evtErrStr(pInfo->fd));
+    }
+
+    pMse->buttons = xf86SetIntOption (pInfo->options, "Buttons", 0);
+    if (pMse->buttons == 0) {
+      pMse->buttons = 8;
+      from = X_DEFAULT;
+    }
+    xf86Msg (from, "%s: Buttons: %d\n", pInfo->name, pMse->buttons);
+
+    for (evi = 0; evi <= 8; evi++)
+      map[evi] = evi;
+
+    InitPointerDeviceStruct((DevicePtr)pPointer, map, 8,
+        miPointerGetMotionEvents, pMse->Ctrl,
+        miPointerGetMotionBufferSize());
+
+    /* X valuator */
+    xf86InitValuatorAxisStruct(pPointer, 0, 0, -1, 1, 0, 1);
+    xf86InitValuatorDefaults(pPointer, 0);
+
+    /* Y valuator */
+    xf86InitValuatorAxisStruct(pPointer, 1, 0, -1, 1, 0, 1);
+    xf86InitValuatorDefaults(pPointer, 1);
+
+    xf86MotionHistoryAllocate(pInfo);
+
+    ev_flush();
+    ev_suspend();
+    break;
+
+  case DEVICE_ON:
+    pMse->lastButtons = 0;
+    pMse->lastMappedButtons = 0;
+    pMse->emulateState = 0;
+    pPointer->public.on = TRUE;
+    ev_resume();
+    AddEnabledDevice (pInfo->fd);
+    break;
+
+  case DEVICE_OFF:
+  case DEVICE_CLOSE:
+    pPointer->public.on = FALSE;
+    RemoveEnabledDevice (pInfo->fd);
+    if (what == DEVICE_CLOSE) {
+      ev_close();
+      pInfo->fd = -1;
+    } else {
+      ev_suspend();
+    }
+    break;
+  }
+
+  return Success;
+}
+
+static void
+OsMouseReadInput (InputInfoPtr pInfo)
+{
+  MouseDevPtr pMse;
+  EVENT *evp;
+
+  pMse = pInfo->private;
+
+  while ((evp = ev_read()) != (EVENT *)0) {
+    int buttons = EV_BUTTONS(*evp);
+    int dx = EV_DX(*evp), dy = -(EV_DY(*evp)), dz = 0;
+
+    if (buttons & WHEEL_FWD)
+      dz = -1;
+    else if (buttons & WHEEL_BACK)
+      dz = 1;
+
+    buttons &= ~(WHEEL_FWD | WHEEL_BACK);
+
+    pMse->PostEvent (pInfo, buttons, dx, dy, dz, 0);
+    ev_pop();
+  }
+}
+
+static Bool
+OsMousePreInit(InputInfoPtr pInfo, const char *protocol, int flags)
+{
+  MouseDevPtr pMse;
+
+  /* This is called when the protocol is "OSMouse". */
+
+  pMse = pInfo->private;
+  pMse->protocol = protocol;
+  xf86Msg(X_CONFIG, "%s: Protocol: %s\n", pInfo->name, protocol);
+
+  /* Collect the options, and process the common options. */
+  xf86CollectInputOptions(pInfo, NULL, NULL);
+  xf86ProcessCommonOptions(pInfo, pInfo->options);
+
+  /* Check if the device can be opened. */
+  pInfo->fd = ev_initf(xf86Info.consoleFd);
+  if (pInfo->fd != -1) {
+    dmask_t dmask = (D_ABS | D_REL | D_BUTTON);
+    pInfo->fd = ev_open(&dmask);
+  } else {
+    pInfo->fd = -999;
+  }
+
+  if (pInfo->fd < 0) {
+    if (xf86GetAllowMouseOpenFail())
+      xf86Msg(X_WARNING, "%s: cannot open event manager (%s)\n",
+          pInfo->name, evtErrStr(pInfo->fd));
+    else {
+      xf86Msg(X_ERROR, "%s: cannot open event manager (%s)\n",
+          pInfo->name, evtErrStr(pInfo->fd));
+      xfree(pMse);
+      return FALSE;
+    }
+  }
+  ev_close();
+  pInfo->fd = -1;
+
+  /* Process common mouse options (like Emulate3Buttons, etc). */
+  pMse->CommonOptions(pInfo);
+
+  /* Setup the local procs. */
+  pInfo->device_control = OsMouseProc;
+  pInfo->read_input = OsMouseReadInput;
+    
+  pInfo->flags |= XI86_CONFIGURED;
+  return TRUE;
+}
+
+_X_EXPORT OSMouseInfoPtr
+xf86OSMouseInit (int flags)
+{
+  OSMouseInfoPtr p;
+
+  p = xcalloc(sizeof(OSMouseInfoRec), 1);
+  if (!p)
+    return NULL;
+
+  p->SupportedInterfaces        = SupportedInterfaces;
+  p->BuiltinNames               = BuiltinNames;
+  p->DefaultProtocol            = DefaultProtocol;
+  p->CheckProtocol              = CheckProtocol;
+  p->PreInit                    = OsMousePreInit;
+
+  return p;
+}
diff --git a/xorg-server/hw/xfree86/os-support/sco/sco_video.c b/xorg-server/hw/xfree86/os-support/sco/sco_video.c
new file mode 100644
index 000000000..7edf71db3
--- /dev/null
+++ b/xorg-server/hw/xfree86/os-support/sco/sco_video.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright 2001 by J. Kean Johnston <jkj@sco.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name J. Kean Johnston not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission.  J. Kean Johnston makes no
+ * representations about the suitability of this software for any purpose.
+ * It is provided "as is" without express or implied warranty.
+ *
+ * J. KEAN JOHNSTON DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL J. KEAN JOHNSTON BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+ * USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+ * OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/* Re-written May 2001 to represent the current state of reality */
+
+/*
+ * This file contains the completely re-written SCO OpenServer video
+ * routines for XFree86 4.x. Much of this is based on the SCO X server
+ * code (which is an X11R5 server) and will probably only work on
+ * OpenServer versions 5.0.5, 5.0.6 and later. Please send me (jkj@sco.com)
+ * email if you have any questions.
+ *
+ * Ideally, you should use OSR5.0.6A or later, with the updated console
+ * driver for 5.0.6A (its the default driver in 5.0.7 and later).
+ * However, if you are running on an older system, this code will detect
+ * that and adjust accordingly.
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <X11/X.h>
+#include "input.h"
+#include "scrnintstr.h"
+
+#define _NEED_SYSI86
+#include "xf86.h"
+#include "xf86Priv.h"
+#include "xf86OSpriv.h"
+#include "xf86_OSlib.h"
+
+#include <sys/ci/ciioctl.h>
+#define MPXNAME "/dev/atp1"
+#define BASECPU 1
+
+Bool mpxLock = TRUE;
+
+#define USE_VASMETHOD	1
+
+/***************************************************************************/
+/* Video Memory Mapping section                                            */
+/***************************************************************************/
+
+static int sco_mcdone = 0, sco_ismc = 0;
+
+/***************************************************************************/
+/*
+ * To map the video memory, we first need to see if we are on a multi-console
+ * system. If we are, we need to try to use an existing video class in the
+ * kernel. We do this by retrieving the list of currently defined classes
+ * (via the new CONS_GETCLASS ioctl()) to see if we have a class that will
+ * match the range of memory we desire. If we can't find one, we have an
+ * error and we abort.
+ *
+ * If we are not using a multi-console, we can simply use mmap() to map in
+ * the frame buffer, using the classs-access method as a fall-back only if
+ * the mmap() fails (it shouldn't). We always set the appropriate pointers
+ * in the config structure to point ot the right function to map and unmap
+ * the video memory. An alternative to using mmap() is to use the new
+ * CONS_ADDVAS call, which will use vasmalloc() and vasbind() in the kernel
+ * to map the physical address to a virtual one, which it then returns.
+ * I am not 100% sure if this is faster or not, but it may prove easier to
+ * debug things. Just to be on the safe side, I have included both methods
+ * here, and the mmap() method can be used by setting USE_VASMETHOD to 0
+ * above.
+ */
+
+#if !defined(CONS_ADDVAS)
+# undef USE_VASMETHOD
+# define USE_VASMETHOD 0
+#endif
+
+static int
+scoIsMultiConsole (void)
+{
+	int x;
+
+	if (sco_mcdone)
+		return sco_ismc;
+	x = access ("/usr/lib/vidconf/.multiconsole", F_OK);
+	if (x == 0)
+		sco_ismc = 1;
+	sco_mcdone = 1;
+	return sco_ismc;
+}
+
+/*
+ * This maps memory using mmap()
+ */
+static pointer
+mapVidMemMMAP(int ScreenNum, unsigned long Base, unsigned long Size, int flags)
+{
+  int fd;
+  unsigned long realBase, alignOff;
+  pointer base;
+
+  fd = open (DEV_MEM, (flags & VIDMEM_READONLY) ? O_RDONLY : O_RDWR);
+  if (fd < 0) {
+    FatalError("xf86MapVidMem: failed to open %s (%s)\n", DEV_MEM,
+       	strerror(errno));
+    return 0; /* NOTREACHED */
+  }
+
+  realBase = Base & ~(getpagesize() - 1);
+  alignOff = Base - realBase;
+
+#ifdef DEBUG
+  ErrorF("base: %lx, realBase: %lx, alignOff: %lx\n", Base,realBase,alignOff);
+#endif
+
+  base = mmap((caddr_t)0, Size + alignOff,
+	      (flags & VIDMEM_READONLY) ? PROT_READ : (PROT_READ | PROT_WRITE),
+  	      MAP_SHARED, fd, (off_t)realBase);
+  close(fd);
+  if (base == MAP_FAILED) {
+    FatalError("xf86MapVidMem: Could not mmap framebuffer (0x%08x,0x%x) (%s)\n",
+       	Base, Size, strerror(errno));
+    return 0; /* NOTREACHED */
+  }
+
+#ifdef DEBUG
+    ErrorF("base: %lx aligned base: %lx\n",base, base + alignOff);
+#endif
+    return (pointer)((char *)base + alignOff);
+}
+
+#if (USE_VASMETHOD)
+/*
+ * This maps memory using the virtual address space (VAS) console calls.
+ */
+static pointer
+mapVidMemVAS(int ScreenNum, unsigned long Base, unsigned long Size, int flags)
+{
+  struct vidvasmem vas;
+  pointer base;
+
+  vas.base = (long)Base;
+  vas.size = (long)Size;
+
+  base = (pointer)ioctl (xf86Info.consoleFd, CONS_ADDVAS, &vas);
+  if (base == (pointer)-1) {
+    return mapVidMemMMAP(ScreenNum, Base, Size, flags);
+  }
+  return base;
+}
+#endif /* USE_VASMETHOD */
+
+struct vidclass vidclasslist[] = {
+	{ "VBE", "", 0xf0000000, 0x2000000, 0 },
+	{ "P9000", "", 0xc0000000, 0x400000, 0 },
+	{ "TULIP", "", 0x80000000, 0x400000, 0 },
+	{ "VIPER", "", 0xa0000000, 0x400000, 0 },
+	{ "S3T", "", 0xa0000000, 0x200000, 0 },
+	{ "S3DT", "", 0x4000000, 0x400000, 0 },
+	{ "MGA", "", 0x2200000, 0x4000, 0 },
+	{ "CLVGA", "", 0xa0000, 0x20000, 0 },
+	{ "OLIVE", "", 0xd8000000, 0x400000, 0 },
+	{ "S3C", "", 0xa0000, 0x10000, 0 },
+	{ "MGAVLB", "", 0xac000, 0x34000, 0 },
+	{ "ATI8514", "", 0xFF000, 0x1000, 0 },
+	{ "GXREGS", "", 0xb0000, 0x10000, 0 },
+	{ "GX", "", 0xa0000, 0x10000, 0 },
+	{ "CT64300", "", 0xa0000000, 0x400000, 0 },
+	{ "SVGA", "", 0xa0000, 0x20000, 0 },
+	{ "S3V", "", 0xa0000000, 0x400000, 0 },
+	{ "8514A", "", 0xFF000, 0x1000, 0 },
+	{ "VGA", "", 0xa0000, 0x10000, 0 },
+	{ 0 }
+};
+
+static pointer
+mapVidMemVC(int ScreenNum, unsigned long Base, unsigned long Size, int flags)
+{
+  struct vidclass *vcp;
+  char *class = NULL;
+  pointer base;
+
+  for (vcp = vidclasslist; vcp->name; vcp++) {
+    if ((vcp->base == Base) && (vcp->size == Size)) {
+      class = vcp->name;
+      break;
+    }
+  }
+
+  if (class == NULL) {
+    /*
+     * As a fall-back, we will try and use the mmap() approach. This may
+     * prove to be the wrong thing to do, but time and testing will tell.
+     */
+    ErrorF("xf86MapVidMem: No class map defined for (0x%08x,0x%08x)\n", Base, Size);
+#if USE_VASMETHOD
+    return mapVidMemVAS(ScreenNum, Base, Size, flags);
+#else /* !USE_VASMETHOD */
+    return mapVidMemMMAP(ScreenNum, Base, Size, flags);
+#endif
+  }
+
+  /*
+   * We found a suitable class. Try and use it.
+   */
+  base = (pointer)ioctl(xf86Info.consoleFd, MAP_CLASS, class);
+  if ((int)base == -1) {
+    FatalError("xf86MapVidMem: Failed to map video memory class `%s'\n", class);
+    return 0; /* NOTREACHED */
+  }
+
+  return base;
+}
+
+/*
+ * Unmapping the video memory is easy. We always call munmap(), as it is
+ * safe to do so even if we haven't actually mapped in any pages via mmap().
+ * In the case where we used the video class, we don't need to do anything
+ * as the kernel will clean up the TSS when we exit, and will undo the
+ * vasbind() that was done when the class was originally mapped. If we used
+ * vasmap, we simply undo the map. Again, it is benign to call vasunmap
+ * even if we got the frame buffer via some other mechanism (like mmap).
+ */
+
+static void
+unmapVidMem(int ScreenNum, pointer Base, unsigned long Size)
+{
+#if USE_VASMETHOD
+  struct vidvasmem vas;
+  int x;
+
+  vas.base = (long)Base;
+  vas.size = (long)Size;
+
+  x = ioctl (xf86Info.consoleFd, CONS_DELVAS, &vas);
+  if (x == 0)
+    return;
+#endif /* USE_VASMETHOD */
+
+  munmap(Base, Size);
+}
+
+/*
+ * Set things up to point to our local functions. When the kernel gets
+ * MTRR support, we will need to add the required functions for that
+ * here too. MTRR support will most likely appear in 5.0.8 or 5.1.0.
+ *
+ * We also want to lock the X server process to the base CPU in an MPX
+ * system, since we will be going to IOPL 3. Most engine drivers can cope
+ * with I/O access on any CPU but there are a few (AST Manhattan I believe)
+ * that can't, so the server needs to be locked to CPU0.
+ */
+void
+xf86OSInitVidMem(VidMemInfoPtr pVidMem)
+{
+  int mpx_fd;
+
+  if (scoIsMultiConsole ()) {
+    pVidMem->mapMem = mapVidMemVC;
+  } else {
+#if USE_VASMETHOD
+    pVidMem->mapMem = mapVidMemVAS;
+#else
+    pVidMem->mapMem = mapVidMemMMAP;
+#endif
+  }
+
+  pVidMem->unmapMem = unmapVidMem;
+  pVidMem->linearSupported = TRUE;
+  pVidMem->initialised = TRUE;
+
+  if (mpxLock && (mpx_fd = open (MPXNAME, O_RDONLY)) > 0) {
+    if (ioctl (mpx_fd, ACPU_XLOCK, BASECPU) < 0)
+      ErrorF ("xf86OSInitVidMem: Can not bind to CPU 0 (%s)\n",
+          strerror(errno));
+    close (mpx_fd);
+  }
+}
+