Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

4 files changed, 1641 insertions, 0 deletions

diff --git a/xorg-server/hw/xfree86/utils/gtf/Makefile.am b/xorg-server/hw/xfree86/utils/gtf/Makefile.am
new file mode 100644
index 000000000..b14d0c13c
--- /dev/null
+++ b/xorg-server/hw/xfree86/utils/gtf/Makefile.am
@@ -0,0 +1,50 @@
+# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, and/or sell copies of the Software, and to permit persons
+# to whom the Software is furnished to do so, provided that the above
+# copyright notice(s) and this permission notice appear in all copies of
+# the Software and that both the above copyright notice(s) and this
+# permission notice appear in supporting documentation.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+# OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+# INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+# 
+# Except as contained in this notice, the name of a copyright holder
+# shall not be used in advertising or otherwise to promote the sale, use
+# or other dealings in this Software without prior written authorization
+# of the copyright holder.
+# 
+
+bin_PROGRAMS = gtf
+
+gtf_SOURCES = gtf.c
+gtf_CFLAGS = $(XORG_CFLAGS)
+gtf_LDADD = -lm
+
+appmandir = $(APP_MAN_DIR)
+
+appman_PRE = gtf.man
+appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
+
+include $(top_srcdir)/cpprules.in
+
+EXTRA_DIST = gtf.man.pre
+BUILT_SOURCES = $(appman_PRE)
+CLEANFILES = $(appman_PRE) $(appman_DATA)
+
+SUFFIXES += .$(APP_MAN_SUFFIX) .man
+
+.man.$(APP_MAN_SUFFIX):
+	-rm -f $@
+	$(LN_S) $< $@
diff --git a/xorg-server/hw/xfree86/utils/gtf/Makefile.in b/xorg-server/hw/xfree86/utils/gtf/Makefile.in
new file mode 100644
index 000000000..2dd8c08f5
--- /dev/null
+++ b/xorg-server/hw/xfree86/utils/gtf/Makefile.in
@@ -0,0 +1,800 @@
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
+# 
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, and/or sell copies of the Software, and to permit persons
+# to whom the Software is furnished to do so, provided that the above
+# copyright notice(s) and this permission notice appear in all copies of
+# the Software and that both the above copyright notice(s) and this
+# permission notice appear in supporting documentation.
+# 
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+# OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+# INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+# FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+# NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+# WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+# 
+# Except as contained in this notice, the name of a copyright holder
+# shall not be used in advertising or otherwise to promote the sale, use
+# or other dealings in this Software without prior written authorization
+# of the copyright holder.
+# 
+
+#							-*- Makefile -*-
+# Rules for generating files using the C pre-processor
+# (Replaces CppFileTarget from Imake)
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = gtf$(EXEEXT)
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/cpprules.in
+subdir = hw/xfree86/utils/gtf
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/include/do-not-use-config.h \
+	$(top_builddir)/include/xorg-server.h \
+	$(top_builddir)/include/dix-config.h \
+	$(top_builddir)/include/xgl-config.h \
+	$(top_builddir)/include/xorg-config.h \
+	$(top_builddir)/include/xkb-config.h \
+	$(top_builddir)/include/xwin-config.h \
+	$(top_builddir)/include/kdrive-config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_gtf_OBJECTS = gtf-gtf.$(OBJEXT)
+gtf_OBJECTS = $(am_gtf_OBJECTS)
+gtf_DEPENDENCIES =
+gtf_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(gtf_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/include
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(gtf_SOURCES)
+DIST_SOURCES = $(gtf_SOURCES)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+appmanDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(appman_DATA)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+APPDEFAULTDIR = @APPDEFAULTDIR@
+APPLE_APPLICATIONS_DIR = @APPLE_APPLICATIONS_DIR@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASE_FONT_PATH = @BASE_FONT_PATH@
+BUILD_DATE = @BUILD_DATE@
+BUILD_TIME = @BUILD_TIME@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+COMPILEDDEFAULTFONTPATH = @COMPILEDDEFAULTFONTPATH@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DARWIN_LIBS = @DARWIN_LIBS@
+DBUS_CFLAGS = @DBUS_CFLAGS@
+DBUS_LIBS = @DBUS_LIBS@
+DEFAULT_LIBRARY_PATH = @DEFAULT_LIBRARY_PATH@
+DEFAULT_LOGPREFIX = @DEFAULT_LOGPREFIX@
+DEFAULT_MODULE_PATH = @DEFAULT_MODULE_PATH@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DGA_CFLAGS = @DGA_CFLAGS@
+DGA_LIBS = @DGA_LIBS@
+DIX_CFLAGS = @DIX_CFLAGS@
+DLLTOOL = @DLLTOOL@
+DMXEXAMPLES_DEP_CFLAGS = @DMXEXAMPLES_DEP_CFLAGS@
+DMXEXAMPLES_DEP_LIBS = @DMXEXAMPLES_DEP_LIBS@
+DMXMODULES_CFLAGS = @DMXMODULES_CFLAGS@
+DMXMODULES_LIBS = @DMXMODULES_LIBS@
+DMXXIEXAMPLES_DEP_CFLAGS = @DMXXIEXAMPLES_DEP_CFLAGS@
+DMXXIEXAMPLES_DEP_LIBS = @DMXXIEXAMPLES_DEP_LIBS@
+DMXXMUEXAMPLES_DEP_CFLAGS = @DMXXMUEXAMPLES_DEP_CFLAGS@
+DMXXMUEXAMPLES_DEP_LIBS = @DMXXMUEXAMPLES_DEP_LIBS@
+DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@
+DRI2PROTO_LIBS = @DRI2PROTO_LIBS@
+DRIPROTO_CFLAGS = @DRIPROTO_CFLAGS@
+DRIPROTO_LIBS = @DRIPROTO_LIBS@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
+DRI_DRIVER_PATH = @DRI_DRIVER_PATH@
+DSYMUTIL = @DSYMUTIL@
+DTRACE = @DTRACE@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
+FREETYPE_LIBS = @FREETYPE_LIBS@
+GLX_ARCH_DEFINES = @GLX_ARCH_DEFINES@
+GLX_DEFINES = @GLX_DEFINES@
+GL_CFLAGS = @GL_CFLAGS@
+GL_LIBS = @GL_LIBS@
+GREP = @GREP@
+HAL_CFLAGS = @HAL_CFLAGS@
+HAL_LIBS = @HAL_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KDRIVE_CFLAGS = @KDRIVE_CFLAGS@
+KDRIVE_INCS = @KDRIVE_INCS@
+KDRIVE_LIBS = @KDRIVE_LIBS@
+KDRIVE_LOCAL_LIBS = @KDRIVE_LOCAL_LIBS@
+KDRIVE_PURE_INCS = @KDRIVE_PURE_INCS@
+KDRIVE_PURE_LIBS = @KDRIVE_PURE_LIBS@
+LAUNCHD = @LAUNCHD@
+LDFLAGS = @LDFLAGS@
+LD_EXPORT_SYMBOLS_FLAG = @LD_EXPORT_SYMBOLS_FLAG@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBDRM_CFLAGS = @LIBDRM_CFLAGS@
+LIBDRM_LIBS = @LIBDRM_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
+LINUXDOC = @LINUXDOC@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKE_HTML = @MAKE_HTML@
+MAKE_PDF = @MAKE_PDF@
+MAKE_PS = @MAKE_PS@
+MAKE_TEXT = @MAKE_TEXT@
+MESA_SOURCE = @MESA_SOURCE@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
+MKFONTDIR = @MKFONTDIR@
+MKFONTSCALE = @MKFONTSCALE@
+NMEDIT = @NMEDIT@
+OBJC = @OBJC@
+OBJCCLD = @OBJCCLD@
+OBJCDEPMODE = @OBJCDEPMODE@
+OBJCFLAGS = @OBJCFLAGS@
+OBJCLINK = @OBJCLINK@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@
+PCIACCESS_LIBS = @PCIACCESS_LIBS@
+PCI_TXT_IDS_PATH = @PCI_TXT_IDS_PATH@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PROJECTROOT = @PROJECTROOT@
+PS2PDF = @PS2PDF@
+RANLIB = @RANLIB@
+RAWCPP = @RAWCPP@
+RAWCPPFLAGS = @RAWCPPFLAGS@
+SED = sed
+SERVER_MISC_CONFIG_PATH = @SERVER_MISC_CONFIG_PATH@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOLARIS_ASM_CFLAGS = @SOLARIS_ASM_CFLAGS@
+SOLARIS_INOUT_ARCH = @SOLARIS_INOUT_ARCH@
+STRIP = @STRIP@
+TSLIB_CFLAGS = @TSLIB_CFLAGS@
+TSLIB_LIBS = @TSLIB_LIBS@
+UTILS_SYS_LIBS = @UTILS_SYS_LIBS@
+VENDOR_MAN_VERSION = @VENDOR_MAN_VERSION@
+VENDOR_NAME = @VENDOR_NAME@
+VENDOR_NAME_SHORT = @VENDOR_NAME_SHORT@
+VENDOR_RELEASE = @VENDOR_RELEASE@
+VERSION = @VERSION@
+X11APP_ARCHS = @X11APP_ARCHS@
+X11EXAMPLES_DEP_CFLAGS = @X11EXAMPLES_DEP_CFLAGS@
+X11EXAMPLES_DEP_LIBS = @X11EXAMPLES_DEP_LIBS@
+XDMCP_CFLAGS = @XDMCP_CFLAGS@
+XDMCP_LIBS = @XDMCP_LIBS@
+XDMXCONFIG_DEP_CFLAGS = @XDMXCONFIG_DEP_CFLAGS@
+XDMXCONFIG_DEP_LIBS = @XDMXCONFIG_DEP_LIBS@
+XDMX_CFLAGS = @XDMX_CFLAGS@
+XDMX_LIBS = @XDMX_LIBS@
+XDMX_SYS_LIBS = @XDMX_SYS_LIBS@
+XEGLMODULES_CFLAGS = @XEGLMODULES_CFLAGS@
+XEGL_LIBS = @XEGL_LIBS@
+XEGL_SYS_LIBS = @XEGL_SYS_LIBS@
+XEPHYR_CFLAGS = @XEPHYR_CFLAGS@
+XEPHYR_DRI_LIBS = @XEPHYR_DRI_LIBS@
+XEPHYR_INCS = @XEPHYR_INCS@
+XEPHYR_LIBS = @XEPHYR_LIBS@
+XF86CONFIGFILE = @XF86CONFIGFILE@
+XF86MISC_CFLAGS = @XF86MISC_CFLAGS@
+XF86MISC_LIBS = @XF86MISC_LIBS@
+XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@
+XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@
+XGLMODULES_CFLAGS = @XGLMODULES_CFLAGS@
+XGLMODULES_LIBS = @XGLMODULES_LIBS@
+XGLXMODULES_CFLAGS = @XGLXMODULES_CFLAGS@
+XGLXMODULES_LIBS = @XGLXMODULES_LIBS@
+XGLX_LIBS = @XGLX_LIBS@
+XGLX_SYS_LIBS = @XGLX_SYS_LIBS@
+XGL_LIBS = @XGL_LIBS@
+XGL_MODULE_PATH = @XGL_MODULE_PATH@
+XGL_SYS_LIBS = @XGL_SYS_LIBS@
+XKB_BASE_DIRECTORY = @XKB_BASE_DIRECTORY@
+XKB_BIN_DIRECTORY = @XKB_BIN_DIRECTORY@
+XKB_COMPILED_DIR = @XKB_COMPILED_DIR@
+XKM_OUTPUT_DIR = @XKM_OUTPUT_DIR@
+XLIB_CFLAGS = @XLIB_CFLAGS@
+XLIB_LIBS = @XLIB_LIBS@
+XNESTMODULES_CFLAGS = @XNESTMODULES_CFLAGS@
+XNESTMODULES_LIBS = @XNESTMODULES_LIBS@
+XNEST_LIBS = @XNEST_LIBS@
+XNEST_SYS_LIBS = @XNEST_SYS_LIBS@
+XORGCFG_DEP_CFLAGS = @XORGCFG_DEP_CFLAGS@
+XORGCFG_DEP_LIBS = @XORGCFG_DEP_LIBS@
+XORGCONFIG_DEP_CFLAGS = @XORGCONFIG_DEP_CFLAGS@
+XORGCONFIG_DEP_LIBS = @XORGCONFIG_DEP_LIBS@
+XORG_CFLAGS = @XORG_CFLAGS@
+XORG_INCS = @XORG_INCS@
+XORG_LIBS = @XORG_LIBS@
+XORG_MODULES_CFLAGS = @XORG_MODULES_CFLAGS@
+XORG_MODULES_LIBS = @XORG_MODULES_LIBS@
+XORG_OS = @XORG_OS@
+XORG_OS_SUBDIR = @XORG_OS_SUBDIR@
+XORG_SYS_LIBS = @XORG_SYS_LIBS@
+XPRINTMODULES_CFLAGS = @XPRINTMODULES_CFLAGS@
+XPRINTMODULES_LIBS = @XPRINTMODULES_LIBS@
+XPRINTPROTO_CFLAGS = @XPRINTPROTO_CFLAGS@
+XPRINTPROTO_LIBS = @XPRINTPROTO_LIBS@
+XPRINT_CFLAGS = @XPRINT_CFLAGS@
+XPRINT_LIBS = @XPRINT_LIBS@
+XPRINT_SYS_LIBS = @XPRINT_SYS_LIBS@
+XRESEXAMPLES_DEP_CFLAGS = @XRESEXAMPLES_DEP_CFLAGS@
+XRESEXAMPLES_DEP_LIBS = @XRESEXAMPLES_DEP_LIBS@
+XSDL_INCS = @XSDL_INCS@
+XSDL_LIBS = @XSDL_LIBS@
+XSERVERCFLAGS_CFLAGS = @XSERVERCFLAGS_CFLAGS@
+XSERVERCFLAGS_LIBS = @XSERVERCFLAGS_LIBS@
+XSERVERLIBS_CFLAGS = @XSERVERLIBS_CFLAGS@
+XSERVERLIBS_LIBS = @XSERVERLIBS_LIBS@
+XSERVER_LIBS = @XSERVER_LIBS@
+XSERVER_SYS_LIBS = @XSERVER_SYS_LIBS@
+XTSTEXAMPLES_DEP_CFLAGS = @XTSTEXAMPLES_DEP_CFLAGS@
+XTSTEXAMPLES_DEP_LIBS = @XTSTEXAMPLES_DEP_LIBS@
+XVFB_LIBS = @XVFB_LIBS@
+XVFB_SYS_LIBS = @XVFB_SYS_LIBS@
+XWINMODULES_CFLAGS = @XWINMODULES_CFLAGS@
+XWINMODULES_LIBS = @XWINMODULES_LIBS@
+XWIN_LIBS = @XWIN_LIBS@
+XWIN_SERVER_NAME = @XWIN_SERVER_NAME@
+XWIN_SYS_LIBS = @XWIN_SYS_LIBS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+__XCONFIGFILE__ = @__XCONFIGFILE__@
+abi_ansic = @abi_ansic@
+abi_extension = @abi_extension@
+abi_font = @abi_font@
+abi_videodrv = @abi_videodrv@
+abi_xinput = @abi_xinput@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+driverdir = @driverdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+extdir = @extdir@
+ft_config = @ft_config@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+launchagentsdir = @launchagentsdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+moduledir = @moduledir@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sdkdir = @sdkdir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+xglmoduledir = @xglmoduledir@
+xpconfigdir = @xpconfigdir@
+gtf_SOURCES = gtf.c
+gtf_CFLAGS = $(XORG_CFLAGS)
+gtf_LDADD = -lm
+appmandir = $(APP_MAN_DIR)
+appman_PRE = gtf.man
+appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
+SUFFIXES = .pre .man .man.pre .$(APP_MAN_SUFFIX) .man
+
+# Translate XCOMM into pound sign with sed, rather than passing -DXCOMM=XCOMM
+# to cpp, because that trick does not work on all ANSI C preprocessors.
+# Delete line numbers from the cpp output (-P is not portable, I guess).
+# Allow XCOMM to be preceded by whitespace and provide a means of generating
+# output lines with trailing backslashes.
+# Allow XHASH to always be substituted, even in cases where XCOMM isn't.
+CPP_SED_MAGIC = $(SED) -e '/^\#  *[0-9][0-9]*  *.*$$/d' \
+                       -e '/^\#line  *[0-9][0-9]*  *.*$$/d' \
+                       -e '/^[         ]*XCOMM$$/s/XCOMM/\#/' \
+                       -e '/^[         ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/\#/' \
+                       -e '/^[         ]*XHASH/s/XHASH/\#/' \
+                       -e '/\@\@$$/s/\@\@$$/\\/'
+
+
+# Strings to replace in man pages
+XORGRELSTRING = @PACKAGE_STRING@
+XORGMANNAME = X Version 11
+XSERVERNAME = Xorg
+MANDEFS = \
+        -D__vendorversion__="\"$(XORGRELSTRING)\" \"$(XORGMANNAME)\"" \
+        -D__xorgversion__="\"$(XORGRELSTRING)\" \"$(XORGMANNAME)\"" \
+	-D__appmansuffix__=$(APP_MAN_SUFFIX) \
+	-D__filemansuffix__=$(FILE_MAN_SUFFIX) \
+	-D__libmansuffix__=$(LIB_MAN_SUFFIX) \
+	-D__miscmansuffix__=$(MISC_MAN_SUFFIX) \
+	-D__drivermansuffix__=$(DRIVER_MAN_SUFFIX) \
+	-D__adminmansuffix__=$(ADMIN_MAN_SUFFIX) \
+	-D__mandir__=$(mandir) \
+	-D__projectroot__=$(prefix) \
+	-D__xconfigfile__=$(__XCONFIGFILE__) -D__xconfigdir__=$(XCONFIGDIR) \
+	-D__xlogfile__=$(XLOGFILE) -D__xservername__=$(XSERVERNAME) 
+
+EXTRA_DIST = gtf.man.pre
+BUILT_SOURCES = $(appman_PRE)
+CLEANFILES = $(appman_PRE) $(appman_DATA)
+all: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .pre .man .man.pre .$(APP_MAN_SUFFIX) .man .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/cpprules.in $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  hw/xfree86/utils/gtf/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  hw/xfree86/utils/gtf/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	     || test -f $$p1 \
+	  ; then \
+	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
+	done
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+gtf$(EXEEXT): $(gtf_OBJECTS) $(gtf_DEPENDENCIES) 
+	@rm -f gtf$(EXEEXT)
+	$(gtf_LINK) $(gtf_OBJECTS) $(gtf_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtf-gtf.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+gtf-gtf.o: gtf.c
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -MT gtf-gtf.o -MD -MP -MF $(DEPDIR)/gtf-gtf.Tpo -c -o gtf-gtf.o `test -f 'gtf.c' || echo '$(srcdir)/'`gtf.c
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='gtf.c' object='gtf-gtf.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -c -o gtf-gtf.o `test -f 'gtf.c' || echo '$(srcdir)/'`gtf.c
+
+gtf-gtf.obj: gtf.c
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -MT gtf-gtf.obj -MD -MP -MF $(DEPDIR)/gtf-gtf.Tpo -c -o gtf-gtf.obj `if test -f 'gtf.c'; then $(CYGPATH_W) 'gtf.c'; else $(CYGPATH_W) '$(srcdir)/gtf.c'; fi`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/gtf-gtf.Tpo $(DEPDIR)/gtf-gtf.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='gtf.c' object='gtf-gtf.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(gtf_CFLAGS) $(CFLAGS) -c -o gtf-gtf.obj `if test -f 'gtf.c'; then $(CYGPATH_W) 'gtf.c'; else $(CYGPATH_W) '$(srcdir)/gtf.c'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-appmanDATA: $(appman_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(appmandir)" || $(MKDIR_P) "$(DESTDIR)$(appmandir)"
+	@list='$(appman_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
+	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
+	done
+
+uninstall-appmanDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(appman_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(PROGRAMS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-appmanDATA
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libtool ctags distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-appmanDATA install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-appmanDATA \
+	uninstall-binPROGRAMS
+
+
+.pre:
+	$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $< | $(CPP_SED_MAGIC) > $@
+
+.man.pre.man:
+	$(RAWCPP) $(RAWCPPFLAGS) $(MANDEFS) $(EXTRAMANDEFS) < $< | $(CPP_SED_MAGIC) > $@
+
+.man.$(APP_MAN_SUFFIX):
+	-rm -f $@
+	$(LN_S) $< $@
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/xorg-server/hw/xfree86/utils/gtf/gtf.c b/xorg-server/hw/xfree86/utils/gtf/gtf.c
new file mode 100644
index 000000000..fd4a4f23c
--- /dev/null
+++ b/xorg-server/hw/xfree86/utils/gtf/gtf.c
@@ -0,0 +1,746 @@
+/* gtf.c  Generate mode timings using the GTF Timing Standard
+ *
+ * gcc gtf.c -o gtf -lm -Wall
+ *
+ * Copyright (c) 2001, Andy Ritger  aritger@nvidia.com
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 
+ * o Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * o Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer
+ *   in the documentation and/or other materials provided with the
+ *   distribution.
+ * o Neither the name of NVIDIA nor the names of its contributors
+ *   may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
+ * NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * 
+ *
+ * This program is based on the Generalized Timing Formula(GTF TM)
+ * Standard Version: 1.0, Revision: 1.0
+ *
+ * The GTF Document contains the following Copyright information:
+ *
+ * Copyright (c) 1994, 1995, 1996 - Video Electronics Standards
+ * Association. Duplication of this document within VESA member
+ * companies for review purposes is permitted. All other rights
+ * reserved.
+ *
+ * While every precaution has been taken in the preparation
+ * of this standard, the Video Electronics Standards Association and
+ * its contributors assume no responsibility for errors or omissions,
+ * and make no warranties, expressed or implied, of functionality
+ * of suitability for any purpose. The sample code contained within
+ * this standard may be used without restriction.
+ *
+ * 
+ *
+ * The GTF EXCEL(TM) SPREADSHEET, a sample (and the definitive)
+ * implementation of the GTF Timing Standard, is available at:
+ *
+ * ftp://ftp.vesa.org/pub/GTF/GTF_V1R1.xls
+ *
+ *
+ *
+ * This program takes a desired resolution and vertical refresh rate,
+ * and computes mode timings according to the GTF Timing Standard.
+ * These mode timings can then be formatted as an XServer modeline
+ * or a mode description for use by fbset(8).
+ *
+ *
+ *
+ * NOTES:
+ *
+ * The GTF allows for computation of "margins" (the visible border
+ * surrounding the addressable video); on most non-overscan type
+ * systems, the margin period is zero.  I've implemented the margin
+ * computations but not enabled it because 1) I don't really have
+ * any experience with this, and 2) neither XServer modelines nor
+ * fbset fb.modes provide an obvious way for margin timings to be
+ * included in their mode descriptions (needs more investigation).
+ * 
+ * The GTF provides for computation of interlaced mode timings;
+ * I've implemented the computations but not enabled them, yet.
+ * I should probably enable and test this at some point.
+ *
+ * 
+ *
+ * TODO:
+ *
+ * o Add support for interlaced modes.
+ *
+ * o Implement the other portions of the GTF: compute mode timings
+ *   given either the desired pixel clock or the desired horizontal
+ *   frequency.
+ *
+ * o It would be nice if this were more general purpose to do things
+ *   outside the scope of the GTF: like generate double scan mode
+ *   timings, for example.
+ *   
+ * o Printing digits to the right of the decimal point when the
+ *   digits are 0 annoys me.
+ *
+ * o Error checking.
+ *
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+# include <xorg-config.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+
+
+#if defined(__Lynx__)
+#define rint(x) floor(x)
+#endif
+
+#define MARGIN_PERCENT    1.8   /* % of active vertical image                */
+#define CELL_GRAN         8.0   /* assumed character cell granularity        */
+#define MIN_PORCH         1     /* minimum front porch                       */
+#define V_SYNC_RQD        3     /* width of vsync in lines                   */
+#define H_SYNC_PERCENT    8.0   /* width of hsync as % of total line         */
+#define MIN_VSYNC_PLUS_BP 550.0 /* min time of vsync + back porch (microsec) */
+#define M                 600.0 /* blanking formula gradient                 */
+#define C                 40.0  /* blanking formula offset                   */
+#define K                 128.0 /* blanking formula scaling factor           */
+#define J                 20.0  /* blanking formula scaling factor           */
+
+/* C' and M' are part of the Blanking Duty Cycle computation */
+
+#define C_PRIME           (((C - J) * K/256.0) + J)
+#define M_PRIME           (K/256.0 * M)
+
+
+/* struct definitions */
+
+typedef struct __mode
+{
+    int hr, hss, hse, hfl;
+    int vr, vss, vse, vfl;
+    float pclk, h_freq, v_freq;
+} mode;
+
+
+typedef struct __options
+{
+    int x, y;
+    int xorgmode, fbmode;
+    float v_freq;
+} options;
+
+
+
+
+/* prototypes */
+
+void print_value(int n, char *name, float val);
+void print_xf86_mode (mode *m);
+void print_fb_mode (mode *m);
+mode *vert_refresh (int h_pixels, int v_lines, float freq,
+                    int interlaced, int margins);
+options *parse_command_line (int argc, char *argv[]);
+
+
+
+
+/*
+ * print_value() - print the result of the named computation; this is
+ * useful when comparing against the GTF EXCEL spreadsheet.
+ */
+
+int global_verbose = 0;
+
+void print_value(int n, char *name, float val)
+{
+    if (global_verbose) {
+        printf("%2d: %-27s: %15f\n", n, name, val);
+    }
+}
+
+
+
+/* print_xf86_mode() - print the XServer modeline, given mode timings. */
+
+void print_xf86_mode (mode *m)
+{
+    printf ("\n");
+    printf ("  # %dx%d @ %.2f Hz (GTF) hsync: %.2f kHz; pclk: %.2f MHz\n",
+            m->hr, m->vr, m->v_freq, m->h_freq, m->pclk);
+    
+    printf ("  Modeline \"%dx%d_%.2f\"  %.2f"
+            "  %d %d %d %d"
+            "  %d %d %d %d"
+            "  -HSync +Vsync\n\n",
+            m->hr, m->vr, m->v_freq, m->pclk,
+            m->hr, m->hss, m->hse, m->hfl,
+            m->vr, m->vss, m->vse, m->vfl);
+    
+}
+
+
+
+/*
+ * print_fb_mode() - print a mode description in fbset(8) format;
+ * see the fb.modes(8) manpage.  The timing description used in
+ * this is rather odd; they use "left and right margin" to refer
+ * to the portion of the hblank before and after the sync pulse
+ * by conceptually wrapping the portion of the blank after the pulse
+ * to infront of the visible region; ie:
+ * 
+ *
+ * Timing description I'm accustomed to:
+ *
+ *
+ *
+ *     <--------1--------> <--2--> <--3--> <--4-->
+ *                                _________
+ *    |-------------------|_______|       |_______
+ *
+ *                        R       SS      SE     FL
+ *       
+ * 1: visible image
+ * 2: blank before sync (aka front porch)
+ * 3: sync pulse
+ * 4: blank after sync (aka back porch)
+ * R: Resolution
+ * SS: Sync Start
+ * SE: Sync End
+ * FL: Frame Length
+ *
+ *
+ * But the fb.modes format is:
+ *
+ *
+ *    <--4--> <--------1--------> <--2--> <--3--> 
+ *                                       _________
+ *    _______|-------------------|_______|       |
+ *  
+ * The fb.modes(8) manpage refers to <4> and <2> as the left and
+ * right "margin" (as well as upper and lower margin in the vertical
+ * direction) -- note that this has nothing to do with the term
+ * "margin" used in the GTF Timing Standard.
+ *
+ * XXX always prints the 32 bit mode -- should I provide a command
+ * line option to specify the bpp?  It's simple enough for a user
+ * to edit the mode description after it's generated.
+ */
+
+void print_fb_mode (mode *m)
+{
+    printf ("\n");
+    printf ("mode \"%dx%d %.2fHz 32bit (GTF)\"\n",
+            m->hr, m->vr, m->v_freq);
+    printf ("    # PCLK: %.2f MHz, H: %.2f kHz, V: %.2f Hz\n",
+            m->pclk, m->h_freq, m->v_freq);
+    printf ("    geometry %d %d %d %d 32\n",
+            m->hr, m->vr, m->hr, m->vr);
+    printf ("    timings %d %d %d %d %d %d %d\n",
+            (int) rint(1000000.0/m->pclk),/* pixclock in picoseconds */
+            m->hfl - m->hse,              /* left margin (in pixels) */
+            m->hss - m->hr,               /* right margin (in pixels) */
+            m->vfl - m->vse,              /* upper margin (in pixel lines) */
+            m->vss - m->vr,               /* lower margin (in pixel lines) */
+            m->hse - m->hss,              /* horizontal sync length (pixels) */
+            m->vse - m->vss);             /* vert sync length (pixel lines) */
+    printf ("    hsync low\n");
+    printf ("    vsync high\n");
+    printf ("endmode\n\n");
+    
+}
+
+
+
+
+/*
+ * vert_refresh() - as defined by the GTF Timing Standard, compute the
+ * Stage 1 Parameters using the vertical refresh frequency.  In other
+ * words: input a desired resolution and desired refresh rate, and
+ * output the GTF mode timings.
+ *
+ * XXX All the code is in place to compute interlaced modes, but I don't
+ * feel like testing it right now.
+ *
+ * XXX margin computations are implemented but not tested (nor used by
+ * XServer of fbset mode descriptions, from what I can tell).
+ */
+
+mode *vert_refresh (int h_pixels, int v_lines, float freq,
+                    int interlaced, int margins)
+{
+    float h_pixels_rnd;
+    float v_lines_rnd;
+    float v_field_rate_rqd;
+    float top_margin;
+    float bottom_margin;
+    float interlace;
+    float h_period_est;
+    float vsync_plus_bp;
+    float v_back_porch;
+    float total_v_lines;
+    float v_field_rate_est;
+    float h_period;
+    float v_field_rate;
+    float v_frame_rate;
+    float left_margin;
+    float right_margin;
+    float total_active_pixels;
+    float ideal_duty_cycle;
+    float h_blank;
+    float total_pixels;
+    float pixel_freq;
+    float h_freq;
+
+    float h_sync;
+    float h_front_porch;
+    float v_odd_front_porch_lines;
+
+    mode *m = (mode*) malloc (sizeof (mode));
+    
+    
+    /*  1. In order to give correct results, the number of horizontal
+     *  pixels requested is first processed to ensure that it is divisible
+     *  by the character size, by rounding it to the nearest character
+     *  cell boundary:
+     *
+     *  [H PIXELS RND] = ((ROUND([H PIXELS]/[CELL GRAN RND],0))*[CELLGRAN RND])
+     */
+    
+    h_pixels_rnd = rint((float) h_pixels / CELL_GRAN) * CELL_GRAN;
+    
+    print_value(1, "[H PIXELS RND]", h_pixels_rnd);
+
+    
+    /*  2. If interlace is requested, the number of vertical lines assumed
+     *  by the calculation must be halved, as the computation calculates
+     *  the number of vertical lines per field. In either case, the
+     *  number of lines is rounded to the nearest integer.
+     *   
+     *  [V LINES RND] = IF([INT RQD?]="y", ROUND([V LINES]/2,0),
+     *                                     ROUND([V LINES],0))
+     */
+
+    v_lines_rnd = interlaced ?
+            rint((float) v_lines) / 2.0 :
+            rint((float) v_lines);
+    
+    print_value(2, "[V LINES RND]", v_lines_rnd);
+    
+    
+    /*  3. Find the frame rate required:
+     *
+     *  [V FIELD RATE RQD] = IF([INT RQD?]="y", [I/P FREQ RQD]*2,
+     *                                          [I/P FREQ RQD])
+     */
+
+    v_field_rate_rqd = interlaced ? (freq * 2.0) : (freq);
+
+    print_value(3, "[V FIELD RATE RQD]", v_field_rate_rqd);
+    
+
+    /*  4. Find number of lines in Top margin:
+     *
+     *  [TOP MARGIN (LINES)] = IF([MARGINS RQD?]="Y",
+     *          ROUND(([MARGIN%]/100*[V LINES RND]),0),
+     *          0)
+     */
+
+    top_margin = margins ? rint(MARGIN_PERCENT / 100.0 * v_lines_rnd) : (0.0);
+
+    print_value(4, "[TOP MARGIN (LINES)]", top_margin);
+    
+
+    /*  5. Find number of lines in Bottom margin:
+     *
+     *  [BOT MARGIN (LINES)] = IF([MARGINS RQD?]="Y",
+     *          ROUND(([MARGIN%]/100*[V LINES RND]),0),
+     *          0)
+     */
+
+    bottom_margin = margins ? rint(MARGIN_PERCENT/100.0 * v_lines_rnd) : (0.0);
+
+    print_value(5, "[BOT MARGIN (LINES)]", bottom_margin);
+
+    
+    /*  6. If interlace is required, then set variable [INTERLACE]=0.5:
+     *   
+     *  [INTERLACE]=(IF([INT RQD?]="y",0.5,0))
+     */
+
+    interlace = interlaced ? 0.5 : 0.0;
+
+    print_value(6, "[INTERLACE]", interlace);
+    
+
+    /*  7. Estimate the Horizontal period
+     *
+     *  [H PERIOD EST] = ((1/[V FIELD RATE RQD]) - [MIN VSYNC+BP]/1000000) /
+     *                    ([V LINES RND] + (2*[TOP MARGIN (LINES)]) +
+     *                     [MIN PORCH RND]+[INTERLACE]) * 1000000
+     */
+
+    h_period_est = (((1.0/v_field_rate_rqd) - (MIN_VSYNC_PLUS_BP/1000000.0))
+                    / (v_lines_rnd + (2*top_margin) + MIN_PORCH + interlace)
+                    * 1000000.0);
+
+    print_value(7, "[H PERIOD EST]", h_period_est);
+    
+
+    /*  8. Find the number of lines in V sync + back porch:
+     *
+     *  [V SYNC+BP] = ROUND(([MIN VSYNC+BP]/[H PERIOD EST]),0)
+     */
+
+    vsync_plus_bp = rint(MIN_VSYNC_PLUS_BP/h_period_est);
+
+    print_value(8, "[V SYNC+BP]", vsync_plus_bp);
+    
+    
+    /*  9. Find the number of lines in V back porch alone:
+     *
+     *  [V BACK PORCH] = [V SYNC+BP] - [V SYNC RND]
+     *
+     *  XXX is "[V SYNC RND]" a typo? should be [V SYNC RQD]?
+     */
+    
+    v_back_porch = vsync_plus_bp - V_SYNC_RQD;
+    
+    print_value(9, "[V BACK PORCH]", v_back_porch);
+    
+
+    /*  10. Find the total number of lines in Vertical field period:
+     *
+     *  [TOTAL V LINES] = [V LINES RND] + [TOP MARGIN (LINES)] +
+     *                    [BOT MARGIN (LINES)] + [V SYNC+BP] + [INTERLACE] +
+     *                    [MIN PORCH RND]
+     */
+
+    total_v_lines = v_lines_rnd + top_margin + bottom_margin + vsync_plus_bp +
+        interlace + MIN_PORCH;
+    
+    print_value(10, "[TOTAL V LINES]", total_v_lines);
+    
+
+    /*  11. Estimate the Vertical field frequency:
+     *
+     *  [V FIELD RATE EST] = 1 / [H PERIOD EST] / [TOTAL V LINES] * 1000000
+     */
+
+    v_field_rate_est = 1.0 / h_period_est / total_v_lines * 1000000.0;
+    
+    print_value(11, "[V FIELD RATE EST]", v_field_rate_est);
+    
+
+    /*  12. Find the actual horizontal period:
+     *
+     *  [H PERIOD] = [H PERIOD EST] / ([V FIELD RATE RQD] / [V FIELD RATE EST])
+     */
+
+    h_period = h_period_est / (v_field_rate_rqd / v_field_rate_est);
+    
+    print_value(12, "[H PERIOD]", h_period);
+    
+
+    /*  13. Find the actual Vertical field frequency:
+     *
+     *  [V FIELD RATE] = 1 / [H PERIOD] / [TOTAL V LINES] * 1000000
+     */
+
+    v_field_rate = 1.0 / h_period / total_v_lines * 1000000.0;
+
+    print_value(13, "[V FIELD RATE]", v_field_rate);
+    
+
+    /*  14. Find the Vertical frame frequency:
+     *
+     *  [V FRAME RATE] = (IF([INT RQD?]="y", [V FIELD RATE]/2, [V FIELD RATE]))
+     */
+
+    v_frame_rate = interlaced ? v_field_rate / 2.0 : v_field_rate;
+
+    print_value(14, "[V FRAME RATE]", v_frame_rate);
+    
+
+    /*  15. Find number of pixels in left margin:
+     *
+     *  [LEFT MARGIN (PIXELS)] = (IF( [MARGINS RQD?]="Y",
+     *          (ROUND( ([H PIXELS RND] * [MARGIN%] / 100 /
+     *                   [CELL GRAN RND]),0)) * [CELL GRAN RND],
+     *          0))
+     */
+
+    left_margin = margins ?
+        rint(h_pixels_rnd * MARGIN_PERCENT / 100.0 / CELL_GRAN) * CELL_GRAN :
+        0.0;
+    
+    print_value(15, "[LEFT MARGIN (PIXELS)]", left_margin);
+    
+
+    /*  16. Find number of pixels in right margin:
+     *
+     *  [RIGHT MARGIN (PIXELS)] = (IF( [MARGINS RQD?]="Y",
+     *          (ROUND( ([H PIXELS RND] * [MARGIN%] / 100 /
+     *                   [CELL GRAN RND]),0)) * [CELL GRAN RND],
+     *          0))
+     */
+    
+    right_margin = margins ?
+        rint(h_pixels_rnd * MARGIN_PERCENT / 100.0 / CELL_GRAN) * CELL_GRAN :
+        0.0;
+    
+    print_value(16, "[RIGHT MARGIN (PIXELS)]", right_margin);
+    
+
+    /*  17. Find total number of active pixels in image and left and right
+     *  margins:
+     *
+     *  [TOTAL ACTIVE PIXELS] = [H PIXELS RND] + [LEFT MARGIN (PIXELS)] +
+     *                          [RIGHT MARGIN (PIXELS)]
+     */
+
+    total_active_pixels = h_pixels_rnd + left_margin + right_margin;
+    
+    print_value(17, "[TOTAL ACTIVE PIXELS]", total_active_pixels);
+    
+    
+    /*  18. Find the ideal blanking duty cycle from the blanking duty cycle
+     *  equation:
+     *
+     *  [IDEAL DUTY CYCLE] = [C'] - ([M']*[H PERIOD]/1000)
+     */
+
+    ideal_duty_cycle = C_PRIME - (M_PRIME * h_period / 1000.0);
+    
+    print_value(18, "[IDEAL DUTY CYCLE]", ideal_duty_cycle);
+    
+
+    /*  19. Find the number of pixels in the blanking time to the nearest
+     *  double character cell:
+     *
+     *  [H BLANK (PIXELS)] = (ROUND(([TOTAL ACTIVE PIXELS] *
+     *                               [IDEAL DUTY CYCLE] /
+     *                               (100-[IDEAL DUTY CYCLE]) /
+     *                               (2*[CELL GRAN RND])), 0))
+     *                       * (2*[CELL GRAN RND])
+     */
+
+    h_blank = rint(total_active_pixels *
+                   ideal_duty_cycle /
+                   (100.0 - ideal_duty_cycle) /
+                   (2.0 * CELL_GRAN)) * (2.0 * CELL_GRAN);
+    
+    print_value(19, "[H BLANK (PIXELS)]", h_blank);
+    
+
+    /*  20. Find total number of pixels:
+     *
+     *  [TOTAL PIXELS] = [TOTAL ACTIVE PIXELS] + [H BLANK (PIXELS)]
+     */
+
+    total_pixels = total_active_pixels + h_blank;
+    
+    print_value(20, "[TOTAL PIXELS]", total_pixels);
+    
+
+    /*  21. Find pixel clock frequency:
+     *
+     *  [PIXEL FREQ] = [TOTAL PIXELS] / [H PERIOD]
+     */
+    
+    pixel_freq = total_pixels / h_period;
+    
+    print_value(21, "[PIXEL FREQ]", pixel_freq);
+    
+
+    /*  22. Find horizontal frequency:
+     *
+     *  [H FREQ] = 1000 / [H PERIOD]
+     */
+
+    h_freq = 1000.0 / h_period;
+    
+    print_value(22, "[H FREQ]", h_freq);
+    
+
+
+    /* Stage 1 computations are now complete; I should really pass
+       the results to another function and do the Stage 2
+       computations, but I only need a few more values so I'll just
+       append the computations here for now */
+
+    
+
+    /*  17. Find the number of pixels in the horizontal sync period:
+     *
+     *  [H SYNC (PIXELS)] =(ROUND(([H SYNC%] / 100 * [TOTAL PIXELS] /
+     *                             [CELL GRAN RND]),0))*[CELL GRAN RND]
+     */
+
+    h_sync = rint(H_SYNC_PERCENT/100.0 * total_pixels / CELL_GRAN) * CELL_GRAN;
+
+    print_value(17, "[H SYNC (PIXELS)]", h_sync);
+    
+
+    /*  18. Find the number of pixels in the horizontal front porch period:
+     *
+     *  [H FRONT PORCH (PIXELS)] = ([H BLANK (PIXELS)]/2)-[H SYNC (PIXELS)]
+     */
+
+    h_front_porch = (h_blank / 2.0) - h_sync;
+
+    print_value(18, "[H FRONT PORCH (PIXELS)]", h_front_porch);
+    
+    
+    /*  36. Find the number of lines in the odd front porch period:
+     *
+     *  [V ODD FRONT PORCH(LINES)]=([MIN PORCH RND]+[INTERLACE])
+     */
+    
+    v_odd_front_porch_lines = MIN_PORCH + interlace;
+    
+    print_value(36, "[V ODD FRONT PORCH(LINES)]", v_odd_front_porch_lines);
+    
+
+    /* finally, pack the results in the mode struct */
+    
+    m->hr  = (int) (h_pixels_rnd);
+    m->hss = (int) (h_pixels_rnd + h_front_porch);
+    m->hse = (int) (h_pixels_rnd + h_front_porch + h_sync);
+    m->hfl = (int) (total_pixels);
+
+    m->vr  = (int) (v_lines_rnd);
+    m->vss = (int) (v_lines_rnd + v_odd_front_porch_lines);
+    m->vse = (int) (int) (v_lines_rnd + v_odd_front_porch_lines + V_SYNC_RQD);
+    m->vfl = (int) (total_v_lines);
+
+    m->pclk   = pixel_freq;
+    m->h_freq = h_freq;
+    m->v_freq = freq;
+
+    return (m);
+    
+}
+
+
+
+
+/*
+ * parse_command_line() - parse the command line and return an
+ * alloced structure containing the results.  On error print usage
+ * and return NULL.
+ */ 
+
+options *parse_command_line (int argc, char *argv[])
+{
+    int n;
+
+    options *o = (options *) calloc (1, sizeof (options));
+
+    if (argc < 4) goto bad_option;
+
+    o->x = atoi (argv[1]);
+    o->y = atoi (argv[2]);
+    o->v_freq = atof (argv[3]);
+
+    /* XXX should check for errors in the above */
+    
+    n = 4;
+
+    while (n < argc) {
+        if ((strcmp (argv[n], "-v") == 0) ||
+            (strcmp (argv[n], "--verbose") == 0)) {
+            global_verbose = 1;
+        } else if ((strcmp (argv[n], "-f") == 0) ||
+                   (strcmp (argv[n], "--fbmode") == 0)) {
+            o->fbmode = 1;
+        } else if ((strcmp (argv[n], "-x") == 0) ||
+		   (strcmp (argv[n], "--xorgmode") == 0) ||
+                   (strcmp (argv[n], "--xf86mode") == 0)) {
+            o->xorgmode = 1;
+        } else {
+            goto bad_option;
+        }
+        
+        n++;
+    }
+
+    /* if neither xorgmode nor fbmode were requested, default to
+       xorgmode */
+
+    if (!o->fbmode && !o->xorgmode) o->xorgmode = 1;
+    
+    return (o);
+    
+ bad_option:
+
+    fprintf (stderr, "\n");
+    fprintf (stderr, "usage: %s x y refresh [-v|--verbose] "
+             "[-f|--fbmode] [-x|--xorgmode]\n", argv[0]);
+
+    fprintf (stderr, "\n");
+    
+    fprintf (stderr, "            x : the desired horizontal "
+             "resolution (required)\n");
+    fprintf (stderr, "            y : the desired vertical "
+             "resolution (required)\n");
+    fprintf (stderr, "      refresh : the desired refresh "
+             "rate (required)\n");
+    fprintf (stderr, " -v|--verbose : enable verbose printouts "
+             "(traces each step of the computation)\n");
+    fprintf (stderr, "  -f|--fbmode : output an fbset(8)-style mode "
+             "description\n");
+    fprintf (stderr, " -x|--xorgmode : output an "__XSERVERNAME__"-style mode "
+             "description (this is the default\n"
+             "                if no mode description is requested)\n");
+    
+    fprintf (stderr, "\n");
+    
+    free (o);
+    return (NULL);
+
+}
+
+
+
+int main (int argc, char *argv[])
+{
+    mode *m;
+    options *o;
+
+    o = parse_command_line (argc, argv);
+    if (!o) exit (1);
+    
+    m = vert_refresh (o->x, o->y, o->v_freq, 0, 0);
+    if (!m) exit (1);
+
+    if (o->xorgmode)
+        print_xf86_mode(m);
+    
+    if (o->fbmode)
+        print_fb_mode(m);
+    
+    return 0;
+    
+}
diff --git a/xorg-server/hw/xfree86/utils/gtf/gtf.man.pre b/xorg-server/hw/xfree86/utils/gtf/gtf.man.pre
new file mode 100644
index 000000000..74ade74cb
--- /dev/null
+++ b/xorg-server/hw/xfree86/utils/gtf/gtf.man.pre
@@ -0,0 +1,45 @@
+.\" $XFree86$
+.TH GTF 1 __vendorversion__
+.SH NAME
+gtf - calculate VESA GTF mode lines
+.SH SYNOPSIS
+.B gtf
+.I h-resolution
+.I v-resolution
+.I refresh
+.RB [ \-v | \-\-verbose ]
+.RB [ \-f | \-\-fbmode ]
+.RB [ \-x | \-\-xorgmode ]
+.SH DESCRIPTION
+.I Gtf
+is a utility for calculating VESA GTF modes.  Given the desired
+horizontal and vertical resolutions and refresh rate (in Hz), the parameters
+for a matching VESA GTF mode are printed out.  Two output formats are
+supported: mode lines suitable for the __xservername__
+.B __xconfigfile__(__filemansuffix__)
+file, and mode parameters suitable for the Linux
+.B fbset(8)
+utility.
+
+.SH OPTIONS
+.TP 8
+.BR \-v | \-\-verbose
+Enable verbose printouts  This shows a trace for each step of the
+computation.
+.TP 8
+.BR \-x | \-\-xorgmode
+Print the mode parameters as __xservername__-style mode lines.  This is the
+default format.
+.TP 8
+.BR \-f | \-\-fbset
+Print the mode parameters in a format suitable for
+.BR fbset(8) .
+.SH "SEE ALSO"
+__xconfigfile__(__filemansuffix__)
+.SH AUTHOR
+Andy Ritger.
+.PP
+This program is based on the Generalized Timing Formula (GTF(TM)) Standard
+Version: 1.0, Revision: 1.0.  The GTF Excel(TM) spreadsheet, a sample
+(and the definitive) implementation of the GTF Timing Standard is
+available at <ftp://ftp.vesa.org/pub/GTF/VTF_V1R1.xls>.