aboutsummaryrefslogtreecommitdiff
path: root/xorg-server/hw/xfree86/xorgconf.cpp
diff options
context:
space:
mode:
authormarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
committermarha <marha@users.sourceforge.net>2009-06-28 22:07:26 +0000
commit3562e78743202e43aec8727005182a2558117eca (patch)
tree8f9113a77d12470c5c851a2a8e4cb02e89df7d43 /xorg-server/hw/xfree86/xorgconf.cpp
downloadvcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.gz
vcxsrv-3562e78743202e43aec8727005182a2558117eca.tar.bz2
vcxsrv-3562e78743202e43aec8727005182a2558117eca.zip
Checked in the following released items:
xkeyboard-config-1.4.tar.gz ttf-bitstream-vera-1.10.tar.gz font-alias-1.0.1.tar.gz font-sun-misc-1.0.0.tar.gz font-sun-misc-1.0.0.tar.gz font-sony-misc-1.0.0.tar.gz font-schumacher-misc-1.0.0.tar.gz font-mutt-misc-1.0.0.tar.gz font-misc-misc-1.0.0.tar.gz font-misc-meltho-1.0.0.tar.gz font-micro-misc-1.0.0.tar.gz font-jis-misc-1.0.0.tar.gz font-isas-misc-1.0.0.tar.gz font-dec-misc-1.0.0.tar.gz font-daewoo-misc-1.0.0.tar.gz font-cursor-misc-1.0.0.tar.gz font-arabic-misc-1.0.0.tar.gz font-winitzki-cyrillic-1.0.0.tar.gz font-misc-cyrillic-1.0.0.tar.gz font-cronyx-cyrillic-1.0.0.tar.gz font-screen-cyrillic-1.0.1.tar.gz font-xfree86-type1-1.0.1.tar.gz font-adobe-utopia-type1-1.0.1.tar.gz font-ibm-type1-1.0.0.tar.gz font-bitstream-type1-1.0.0.tar.gz font-bitstream-speedo-1.0.0.tar.gz font-bh-ttf-1.0.0.tar.gz font-bh-type1-1.0.0.tar.gz font-bitstream-100dpi-1.0.0.tar.gz font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz font-bh-100dpi-1.0.0.tar.gz font-adobe-utopia-100dpi-1.0.1.tar.gz font-adobe-100dpi-1.0.0.tar.gz font-util-1.0.1.tar.gz font-bitstream-75dpi-1.0.0.tar.gz font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz font-adobe-utopia-75dpi-1.0.1.tar.gz font-bh-75dpi-1.0.0.tar.gz bdftopcf-1.0.1.tar.gz font-adobe-75dpi-1.0.0.tar.gz mkfontscale-1.0.6.tar.gz openssl-0.9.8k.tar.gz bigreqsproto-1.0.2.tar.gz xtrans-1.2.2.tar.gz resourceproto-1.0.2.tar.gz inputproto-1.4.4.tar.gz compositeproto-0.4.tar.gz damageproto-1.1.0.tar.gz zlib-1.2.3.tar.gz xkbcomp-1.0.5.tar.gz freetype-2.3.9.tar.gz pthreads-w32-2-8-0-release.tar.gz pixman-0.12.0.tar.gz kbproto-1.0.3.tar.gz evieext-1.0.2.tar.gz fixesproto-4.0.tar.gz recordproto-1.13.2.tar.gz randrproto-1.2.2.tar.gz scrnsaverproto-1.1.0.tar.gz renderproto-0.9.3.tar.gz xcmiscproto-1.1.2.tar.gz fontsproto-2.0.2.tar.gz xextproto-7.0.3.tar.gz xproto-7.0.14.tar.gz libXdmcp-1.0.2.tar.gz libxkbfile-1.0.5.tar.gz libfontenc-1.0.4.tar.gz libXfont-1.3.4.tar.gz libX11-1.1.5.tar.gz libXau-1.0.4.tar.gz libxcb-1.1.tar.gz xorg-server-1.5.3.tar.gz
Diffstat (limited to 'xorg-server/hw/xfree86/xorgconf.cpp')
-rw-r--r--xorg-server/hw/xfree86/xorgconf.cpp604
1 files changed, 604 insertions, 0 deletions
diff --git a/xorg-server/hw/xfree86/xorgconf.cpp b/xorg-server/hw/xfree86/xorgconf.cpp
new file mode 100644
index 000000000..acf90f13f
--- /dev/null
+++ b/xorg-server/hw/xfree86/xorgconf.cpp
@@ -0,0 +1,604 @@
+XCOMM $XdotOrg$
+XCOMM
+XCOMM Copyright (c) 1994-1998 by The XFree86 Project, Inc.
+XCOMM
+XCOMM Permission is hereby granted, free of charge, to any person obtaining a
+XCOMM copy of this software and associated documentation files (the "Software"),
+XCOMM to deal in the Software without restriction, including without limitation
+XCOMM the rights to use, copy, modify, merge, publish, distribute, sublicense,
+XCOMM and/or sell copies of the Software, and to permit persons to whom the
+XCOMM Software is furnished to do so, subject to the following conditions:
+XCOMM
+XCOMM The above copyright notice and this permission notice shall be included in
+XCOMM all copies or substantial portions of the Software.
+XCOMM
+XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+XCOMM THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+XCOMM WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+XCOMM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+XCOMM SOFTWARE.
+XCOMM
+XCOMM Except as contained in this notice, the name of the XFree86 Project shall
+XCOMM not be used in advertising or otherwise to promote the sale, use or other
+XCOMM dealings in this Software without prior written authorization from the
+XCOMM XFree86 Project.
+XCOMM
+XCOMM $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $
+
+XCOMM **********************************************************************
+XCOMM This is a sample configuration file only, intended to illustrate
+XCOMM what a config file might look like. Refer to the XF86Config(4/5)
+XCOMM man page for details about the format of this file. This man page
+XCOMM is installed as MANPAGE
+XCOMM **********************************************************************
+
+XCOMM The ordering of sections is not important in version 4.0 and later.
+
+XCOMM **********************************************************************
+XCOMM Files section. This allows default font and rgb paths to be set
+XCOMM **********************************************************************
+
+Section "Files"
+
+XCOMM Multiple FontPath entries are allowed (which are concatenated together),
+XCOMM as well as specifying multiple comma-separated entries in one FontPath
+XCOMM command (or a combination of both methods)
+
+ FontPath LOCALFONTPATH
+ FontPath MISCFONTPATH
+ FontPath T1FONTPATH
+ FontPath TRUETYPEFONTPATH
+ FontPath DPI75FONTPATH
+ FontPath DPI100FONTPATH
+
+XCOMM ModulePath can be used to set a search path for the X server modules.
+XCOMM The default path is shown here.
+
+XCOMM ModulePath MODULEPATH
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Module section -- this is an optional section which is used to specify
+XCOMM which run-time loadable modules to load when the X server starts up.
+XCOMM **********************************************************************
+
+Section "Module"
+
+XCOMM This loads the DBE extension module.
+
+ Load "dbe"
+
+XCOMM This loads the miscellaneous extensions module, and disables
+XCOMM initialisation of the XFree86-DGA extension within that module.
+
+ SubSection "extmod"
+ Option "omit xfree86-dga"
+ EndSubSection
+
+XCOMM This loads the Type1 and FreeType font modules
+
+ Load "type1"
+ Load "freetype"
+
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Server flags section. This contains various server-wide Options.
+XCOMM **********************************************************************
+
+Section "ServerFlags"
+
+XCOMM Uncomment this to cause a core dump at the spot where a signal is
+XCOMM received. This may leave the console in an unusable state, but may
+XCOMM provide a better stack trace in the core dump to aid in debugging
+
+XCOMM Option "NoTrapSignals"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
+XCOMM (where n is 1 through 12). This allows clients to receive these key
+XCOMM events.
+
+XCOMM Option "DontVTSwitch"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
+XCOMM This allows clients to receive this key event.
+
+XCOMM Option "DontZap"
+
+XCOMM Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
+XCOMM sequences. This allows clients to receive these key events.
+
+XCOMM Option "DontZoom"
+
+XCOMM Uncomment this to disable tuning with the xvidtune client. With
+XCOMM it the client can still run and fetch card and monitor attributes,
+XCOMM but it will not be allowed to change them. If it tries it will
+XCOMM receive a protocol error.
+
+XCOMM Option "DisableVidModeExtension"
+
+XCOMM Uncomment this to enable the use of a non-local xvidtune client.
+
+XCOMM Option "AllowNonLocalXvidtune"
+
+XCOMM Uncomment this to disable dynamically modifying the input device
+XCOMM (mouse and keyboard) settings.
+
+XCOMM Option "DisableModInDev"
+
+XCOMM Uncomment this to enable the use of a non-local client to
+XCOMM change the keyboard or mouse settings (currently only xset).
+
+XCOMM Option "AllowNonLocalModInDev"
+
+XCOMM Set the basic blanking screen saver timeout.
+
+ Option "blank time" "10" # 10 minutes
+
+XCOMM Set the DPMS timeouts. These are set here because they are global
+XCOMM rather than screen-specific. These settings alone don't enable DPMS.
+XCOMM It is enabled per-screen (or per-monitor), and even then only when
+XCOMM the driver supports it.
+
+ Option "standby time" "20"
+ Option "suspend time" "30"
+ Option "off time" "60"
+
+XCOMM On some platform the server needs to estimate the sizes of PCI
+XCOMM memory and pio ranges. This is done by assuming that PCI ranges
+XCOMM don't overlap. Some broken BIOSes tend to set ranges of inactive
+XCOMM devices wrong. Here one can adjust how aggressive the assumptions
+XCOMM should be. Default is 0.
+
+XCOMM Option "EstimateSizesAggresively" "0"
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Input devices
+XCOMM **********************************************************************
+
+XCOMM **********************************************************************
+XCOMM Core keyboard's InputDevice section
+XCOMM **********************************************************************
+
+Section "InputDevice"
+
+ Identifier "Keyboard1"
+ Driver "kbd"
+
+XCOMM Set the keyboard auto repeat parameters. Not all platforms implement
+XCOMM this.
+
+ Option "AutoRepeat" "500 5"
+
+XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
+
+XCOMM Option "Xleds" "1 2 3"
+
+XCOMM To disable the XKEYBOARD extension, uncomment XkbDisable.
+
+XCOMM Option "XkbDisable"
+
+XCOMM To customise the XKB settings to suit your keyboard, modify the
+XCOMM lines below (which are the defaults). For example, for a European
+XCOMM keyboard, you will probably want to use one of:
+XCOMM
+XCOMM Option "XkbModel" "pc102"
+XCOMM Option "XkbModel" "pc105"
+XCOMM
+XCOMM If you have a Microsoft Natural keyboard, you can use:
+XCOMM
+XCOMM Option "XkbModel" "microsoft"
+XCOMM
+XCOMM If you have a US "windows" keyboard you will want:
+XCOMM
+XCOMM Option "XkbModel" "pc104"
+XCOMM
+XCOMM Then to change the language, change the Layout setting.
+XCOMM For example, a german layout can be obtained with:
+XCOMM
+XCOMM Option "XkbLayout" "de"
+XCOMM
+XCOMM or:
+XCOMM
+XCOMM Option "XkbLayout" "de"
+XCOMM Option "XkbVariant" "nodeadkeys"
+XCOMM
+XCOMM If you'd like to switch the positions of your capslock and
+XCOMM control keys, use:
+XCOMM
+XCOMM Option "XkbOptions" "ctrl:swapcaps"
+
+
+XCOMM These are the default XKB settings for xorg
+XCOMM
+XCOMM Option "XkbRules" "xorg"
+XCOMM Option "XkbModel" "pc101"
+XCOMM Option "XkbLayout" "us"
+XCOMM Option "XkbVariant" ""
+XCOMM Option "XkbOptions" ""
+
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Core Pointer's InputDevice section
+XCOMM **********************************************************************
+
+Section "InputDevice"
+
+XCOMM Identifier and driver
+
+ Identifier "Mouse1"
+ Driver "mouse"
+
+XCOMM The mouse protocol and device. The device is normally set to /dev/mouse,
+XCOMM which is usually a symbolic link to the real device.
+
+ Option "Protocol" "Microsoft"
+ Option "Device" "/dev/mouse"
+
+XCOMM On platforms where PnP mouse detection is supported the following
+XCOMM protocol setting can be used when using a newer PnP mouse:
+
+XCOMM Option "Protocol" "Auto"
+
+XCOMM When using mouse connected to a PS/2 port (aka "MousePort"), set the
+XCOMM the protocol as follows. On some platforms some other settings may
+XCOMM be available.
+
+XCOMM Option "Protocol" "PS/2"
+
+XCOMM Baudrate and SampleRate are only for some older Logitech mice. In
+XCOMM almost every case these lines should be omitted.
+
+XCOMM Option "BaudRate" "9600"
+XCOMM Option "SampleRate" "150"
+
+XCOMM Emulate3Buttons is an option for 2-button mice
+XCOMM Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+
+XCOMM Option "Emulate3Buttons"
+XCOMM Option "Emulate3Timeout" "50"
+
+XCOMM ChordMiddle is an option for some 3-button Logitech mice, or any
+XCOMM 3-button mouse where the middle button generates left+right button
+XCOMM events.
+
+XCOMM Option "ChordMiddle"
+
+EndSection
+
+Section "InputDevice"
+ Identifier "Mouse2"
+ Driver "mouse"
+ Option "Protocol" "MouseMan"
+ Option "Device" "/dev/mouse2"
+EndSection
+
+XCOMM Some examples of extended input devices
+
+XCOMM Section "InputDevice"
+XCOMM Identifier "spaceball"
+XCOMM Driver "magellan"
+XCOMM Option "Device" "/dev/cua0"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM Identifier "spaceball2"
+XCOMM Driver "spaceorb"
+XCOMM Option "Device" "/dev/cua0"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM Identifier "touchscreen0"
+XCOMM Driver "microtouch"
+XCOMM Option "Device" "/dev/ttyS0"
+XCOMM Option "MinX" "1412"
+XCOMM Option "MaxX" "15184"
+XCOMM Option "MinY" "15372"
+XCOMM Option "MaxY" "1230"
+XCOMM Option "ScreenNumber" "0"
+XCOMM Option "ReportingMode" "Scaled"
+XCOMM Option "ButtonNumber" "1"
+XCOMM Option "SendCoreEvents"
+XCOMM EndSection
+XCOMM
+XCOMM Section "InputDevice"
+XCOMM Identifier "touchscreen1"
+XCOMM Driver "elo2300"
+XCOMM Option "Device" "/dev/ttyS0"
+XCOMM Option "MinX" "231"
+XCOMM Option "MaxX" "3868"
+XCOMM Option "MinY" "3858"
+XCOMM Option "MaxY" "272"
+XCOMM Option "ScreenNumber" "0"
+XCOMM Option "ReportingMode" "Scaled"
+XCOMM Option "ButtonThreshold" "17"
+XCOMM Option "ButtonNumber" "1"
+XCOMM Option "SendCoreEvents"
+XCOMM EndSection
+
+XCOMM **********************************************************************
+XCOMM Monitor section
+XCOMM **********************************************************************
+
+XCOMM Any number of monitor sections may be present
+
+Section "Monitor"
+
+XCOMM The identifier line must be present.
+
+ Identifier "Generic Monitor"
+
+XCOMM HorizSync is in kHz unless units are specified.
+XCOMM HorizSync may be a comma separated list of discrete values, or a
+XCOMM comma separated list of ranges of values.
+XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
+XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+
+XCOMM HorizSync 31.5 # typical for a single frequency fixed-sync monitor
+XCOMM HorizSync 30-64 # multisync
+XCOMM HorizSync 31.5, 35.2 # multiple fixed sync frequencies
+XCOMM HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
+
+XCOMM VertRefresh is in Hz unless units are specified.
+XCOMM VertRefresh may be a comma separated list of discrete values, or a
+XCOMM comma separated list of ranges of values.
+XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
+XCOMM USER MANUAL FOR THE CORRECT NUMBERS.
+
+XCOMM VertRefresh 60 # typical for a single frequency fixed-sync monitor
+
+XCOMM VertRefresh 50-100 # multisync
+XCOMM VertRefresh 60, 65 # multiple fixed sync frequencies
+XCOMM VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies
+
+XCOMM Modes can be specified in two formats. A compact one-line format, or
+XCOMM a multi-line format.
+
+XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
+XCOMM These two are equivalent
+
+XCOMM ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
+
+ Mode "640x480"
+ DotClock 25.175
+ HTimings 640 664 760 800
+ VTimings 480 491 493 525
+ EndMode
+
+XCOMM These two are equivalent
+
+XCOMM ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
+
+XCOMM Mode "1024x768i"
+XCOMM DotClock 45
+XCOMM HTimings 1024 1048 1208 1264
+XCOMM VTimings 768 776 784 817
+XCOMM Flags "Interlace"
+XCOMM EndMode
+
+XCOMM If a monitor has DPMS support, that can be indicated here. This will
+XCOMM enable DPMS when the monitor is used with drivers that support it.
+
+XCOMM Option "dpms"
+
+XCOMM If a monitor requires that the sync signals be superimposed on the
+XCOMM green signal, the following option will enable this when used with
+XCOMM drivers that support it. Only a relatively small range of hardware
+XCOMM (and drivers) actually support this.
+
+XCOMM Option "sync on green"
+
+EndSection
+
+XCOMM **********************************************************************
+XCOMM Graphics device section
+XCOMM **********************************************************************
+
+XCOMM Any number of graphics device sections may be present
+
+Section "Device"
+
+XCOMM The Identifier must be present.
+
+ Identifier "Generic VGA"
+
+XCOMM The Driver line must be present. When using run-time loadable driver
+XCOMM modules, this line instructs the server to load the specified driver
+XCOMM module. Even when not using loadable driver modules, this line
+XCOMM indicates which driver should interpret the information in this section.
+
+ Driver "vga"
+
+XCOMM The chipset line is optional in most cases. It can be used to override
+XCOMM the driver's chipset detection, and should not normally be specified.
+
+XCOMM Chipset "generic"
+
+XCOMM Various other lines can be specified to override the driver's automatic
+XCOMM detection code. In most cases they are not needed.
+
+XCOMM VideoRam 256
+XCOMM Clocks 25.2 28.3
+
+XCOMM The BusID line is used to specify which of possibly multiple devices
+XCOMM this section is intended for. When this line isn't present, a device
+XCOMM section can only match up with the primary video device. For PCI
+XCOMM devices a line like the following could be used. This line should not
+XCOMM normally be included unless there is more than one video device
+XCOMM intalled.
+
+XCOMM BusID "PCI:0:10:0"
+
+XCOMM Various option lines can be added here as required. Some options
+XCOMM are more appropriate in Screen sections, Display subsections or even
+XCOMM Monitor sections.
+
+XCOMM Option "hw cursor" "off"
+
+EndSection
+
+Section "Device"
+ Identifier "any supported Trident chip"
+ Driver "trident"
+EndSection
+
+Section "Device"
+ Identifier "MGA Millennium I"
+ Driver "mga"
+ Option "hw cursor" "off"
+ BusID "PCI:0:10:0"
+EndSection
+
+Section "Device"
+ Identifier "MGA G200 AGP"
+ Driver "mga"
+ BusID "PCI:1:0:0"
+ Option "pci retry"
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM Screen sections.
+XCOMM **********************************************************************
+
+XCOMM Any number of screen sections may be present. Each describes
+XCOMM the configuration of a single screen. A single specific screen section
+XCOMM may be specified from the X server command line with the "-screen"
+XCOMM option.
+
+Section "Screen"
+
+XCOMM The Identifier, Device and Monitor lines must be present
+
+ Identifier "Screen 1"
+ Device "Generic VGA"
+ Monitor "Generic Monitor"
+
+XCOMM The favoured Depth and/or Bpp may be specified here
+
+ DefaultDepth 8
+
+ SubSection "Display"
+ Depth 8
+ Modes "640x480"
+ ViewPort 0 0
+ Virtual 800 600
+ EndSubsection
+
+ SubSection "Display"
+ Depth 4
+ Modes "640x480"
+ EndSubSection
+
+ SubSection "Display"
+ Depth 1
+ Modes "640x480"
+ EndSubSection
+
+EndSection
+
+
+Section "Screen"
+ Identifier "Screen MGA1"
+ Device "MGA Millennium I"
+ Monitor "Generic Monitor"
+ Option "no accel"
+ DefaultDepth 16
+XCOMM DefaultDepth 24
+
+ SubSection "Display"
+ Depth 8
+ Modes "1280x1024"
+ Option "rgb bits" "8"
+ Visual "StaticColor"
+ EndSubSection
+ SubSection "Display"
+ Depth 16
+ Modes "1280x1024"
+ EndSubSection
+ SubSection "Display"
+ Depth 24
+ Modes "1280x1024"
+ EndSubSection
+EndSection
+
+
+Section "Screen"
+ Identifier "Screen MGA2"
+ Device "MGA G200 AGP"
+ Monitor "Generic Monitor"
+ DefaultDepth 8
+
+ SubSection "Display"
+ Depth 8
+ Modes "1280x1024"
+ Option "rgb bits" "8"
+ Visual "StaticColor"
+ EndSubSection
+EndSection
+
+
+XCOMM **********************************************************************
+XCOMM ServerLayout sections.
+XCOMM **********************************************************************
+
+XCOMM Any number of ServerLayout sections may be present. Each describes
+XCOMM the way multiple screens are organised. A specific ServerLayout
+XCOMM section may be specified from the X server command line with the
+XCOMM "-layout" option. In the absence of this, the first section is used.
+XCOMM When now ServerLayout section is present, the first Screen section
+XCOMM is used alone.
+
+Section "ServerLayout"
+
+XCOMM The Identifier line must be present
+
+ Identifier "Main Layout"
+
+XCOMM Each Screen line specifies a Screen section name, and optionally
+XCOMM the relative position of other screens. The four names after
+XCOMM primary screen name are the screens to the top, bottom, left and right
+XCOMM of the primary screen. In this example, screen 2 is located to the
+XCOMM right of screen 1.
+
+ Screen "Screen MGA 1" "" "" "" "Screen MGA 2"
+ Screen "Screen MGA 2" "" "" "Screen MGA 1" ""
+
+XCOMM Each InputDevice line specifies an InputDevice section name and
+XCOMM optionally some options to specify the way the device is to be
+XCOMM used. Those options include "CorePointer", "CoreKeyboard" and
+XCOMM "SendCoreEvents". In this example, "Mouse1" is the core pointer,
+XCOMM and "Mouse2" is an extended input device that also generates core
+XCOMM pointer events (i.e., both mice will move the standard pointer).
+
+ InputDevice "Mouse1" "CorePointer"
+ InputDevice "Mouse2" "SendCoreEvents"
+ InputDevice "Keyboard1" "CoreKeyboard"
+
+EndSection
+
+
+Section "ServerLayout"
+ Identifier "another layout"
+ Screen "Screen 1"
+ Screen "Screen MGA 1"
+ InputDevice "Mouse1" "CorePointer"
+ InputDevice "Keyboard1" "CoreKeyboard"
+EndSection
+
+
+Section "ServerLayout"
+ Identifier "simple layout"
+ Screen "Screen 1"
+ InputDevice "Mouse1" "CorePointer"
+ InputDevice "Keyboard1" "CoreKeyboard"
+EndSection
+