Git update 4/1/2010

23 files changed, 1595 insertions, 359 deletions

diff --git a/xorg-server/hw/xfree86/common/xf86AutoConfig.c b/xorg-server/hw/xfree86/common/xf86AutoConfig.c
index a6199b0e8..1c4595e36 100644
--- a/xorg-server/hw/xfree86/common/xf86AutoConfig.c
+++ b/xorg-server/hw/xfree86/common/xf86AutoConfig.c
@@ -272,7 +272,8 @@ xf86AutoConfig(void)
     for (cp = builtinConfig; *cp; cp++)
 	xf86ErrorFVerb(3, "\t%s", *cp);
     xf86MsgVerb(X_DEFAULT, 3, "--- End of built-in configuration ---\n");
-    
+
+    xf86initConfigFiles();
     xf86setBuiltinConfig(builtinConfig);
     ret = xf86HandleConfigFile(TRUE);
     FreeConfig();
diff --git a/xorg-server/hw/xfree86/common/xf86Config.c b/xorg-server/hw/xfree86/common/xf86Config.c
index 6fbf61346..1abc182da 100644
--- a/xorg-server/hw/xfree86/common/xf86Config.c
+++ b/xorg-server/hw/xfree86/common/xf86Config.c
@@ -95,6 +95,23 @@ extern DeviceAssocRec mouse_assoc;
 			"%P/lib/X11/%X.%H," "%P/lib/X11/%X-%M," \
 			"%P/lib/X11/%X"
 #endif
+#ifndef ROOT_CONFIGDIRPATH
+#define ROOT_CONFIGDIRPATH	"%A," "%R," \
+				"/etc/X11/%R," "%P/etc/X11/%R," \
+				"/etc/X11/%X-%M," "/etc/X11/%X," "/etc/%X," \
+				"%P/etc/X11/%X.%H," "%P/etc/X11/%X-%M," \
+				"%P/etc/X11/%X," \
+				"%P/lib/X11/%X.%H," "%P/lib/X11/%X-%M," \
+				"%P/lib/X11/%X"
+#endif
+#ifndef USER_CONFIGDIRPATH
+#define USER_CONFIGDIRPATH	"/etc/X11/%S," "%P/etc/X11/%S," \
+				"/etc/X11/%X-%M," "/etc/X11/%X," "/etc/%X," \
+				"%P/etc/X11/%X.%H," "%P/etc/X11/%X-%M," \
+				"%P/etc/X11/%X," \
+				"%P/lib/X11/%X.%H," "%P/lib/X11/%X-%M," \
+				"%P/lib/X11/%X"
+#endif
 #ifndef PROJECTROOT
 #define PROJECTROOT	"/usr/X11R6"
 #endif
@@ -1444,12 +1461,19 @@ checkCoreInputDevices(serverLayoutPtr servlayoutp, Bool implicitLayout)
     }
 
     if (xf86Info.allowEmptyInput && !(foundPointer && foundKeyboard)) {
-#ifdef CONFIG_HAL
-	xf86Msg(X_INFO, "The server relies on HAL to provide the list of "
+#if defined(CONFIG_HAL) || defined(CONFIG_UDEV)
+	const char *config_backend;
+#if defined(CONFIG_HAL)
+	config_backend = "HAL";
+#else
+	config_backend = "udev";
+#endif
+	xf86Msg(X_INFO, "The server relies on %s to provide the list of "
 	                "input devices.\n\tIf no devices become available, "
-	                "reconfigure HAL or disable AutoAddDevices.\n");
+	                "reconfigure %s or disable AutoAddDevices.\n",
+			config_backend, config_backend);
 #else
-	xf86Msg(X_INFO, "HAL is disabled and no input devices were configured.\n"
+	xf86Msg(X_INFO, "Hotplugging is disabled and no input devices were configured.\n"
 			"\tTry disabling AllowEmptyInput.\n");
 #endif
     }
@@ -1471,6 +1495,45 @@ static OptionInfoRec LayoutOptions[] = {
        {0}, FALSE },
 };
 
+static Bool
+configInputDevices(XF86ConfLayoutPtr layout, serverLayoutPtr servlayoutp)
+{
+    XF86ConfInputrefPtr irp;
+    IDevPtr *indp;
+    int count = 0;
+
+    /*
+     * Count the number of input devices.
+     */
+    irp = layout->lay_input_lst;
+    while (irp) {
+	count++;
+	irp = (XF86ConfInputrefPtr)irp->list.next;
+    }
+    DebugF("Found %d input devices in the layout section %s\n",
+	    count, layout.lay_identifier);
+    indp = xnfcalloc((count + 1), sizeof(IDevPtr));
+    indp[count] = NULL;
+    irp = layout->lay_input_lst;
+    count = 0;
+    while (irp) {
+	indp[count] = xnfalloc(sizeof(IDevRec));
+	if (!configInput(indp[count], irp->iref_inputdev, X_CONFIG)) {
+	    while(count--)
+		xfree(indp[count]);
+	    xfree(indp);
+	    return FALSE;
+	}
+	indp[count]->extraOptions = irp->iref_option_lst;
+	count++;
+	irp = (XF86ConfInputrefPtr)irp->list.next;
+    }
+    servlayoutp->inputs = indp;
+
+    return TRUE;
+}
+
+
 /*
  * figure out which layout is active, which screens are used in that layout,
  * which drivers and monitors are used in these screens
@@ -1481,14 +1544,12 @@ configLayout(serverLayoutPtr servlayoutp, XF86ConfLayoutPtr conf_layout,
 {
     XF86ConfAdjacencyPtr adjp;
     XF86ConfInactivePtr idp;
-    XF86ConfInputrefPtr irp;
     int count = 0;
     int scrnum;
     XF86ConfLayoutPtr l;
     MessageType from;
     screenLayoutPtr slp;
     GDevPtr gdp;
-    IDevPtr* indp;
     int i = 0, j;
 
     if (!servlayoutp)
@@ -1639,45 +1700,6 @@ configLayout(serverLayoutPtr servlayoutp, XF86ConfLayoutPtr conf_layout,
 	}
     }
 
-#ifdef LAYOUT_DEBUG
-    ErrorF("Layout \"%s\"\n", conf_layout->lay_identifier);
-    for (i = 0; i < count; i++) {
-	ErrorF("Screen: \"%s\" (%d):\n", slp[i].screen->id,
-	       slp[i].screen->screennum);
-	switch (slp[i].where) {
-	case PosObsolete:
-	    ErrorF("\tObsolete format: \"%s\" \"%s\" \"%s\" \"%s\"\n",
-		   slp[i].top, slp[i].bottom, slp[i].left, slp[i].right);
-	    break;
-	case PosAbsolute:
-	    if (slp[i].x == -1)
-		if (slp[i].screen->screennum == 0)
-		    ErrorF("\tImplicitly left-most\n");
-		else
-		    ErrorF("\tImplicitly right of screen %d\n",
-			   slp[i].screen->screennum - 1);
-	    else
-		ErrorF("\t%d %d\n", slp[i].x, slp[i].y);
-	    break;
-	case PosRightOf:
-	    ErrorF("\tRight of \"%s\"\n", slp[i].refscreen->id);
-	    break;
-	case PosLeftOf:
-	    ErrorF("\tLeft of \"%s\"\n", slp[i].refscreen->id);
-	    break;
-	case PosAbove:
-	    ErrorF("\tAbove \"%s\"\n", slp[i].refscreen->id);
-	    break;
-	case PosBelow:
-	    ErrorF("\tBelow \"%s\"\n", slp[i].refscreen->id);
-	    break;
-	case PosRelative:
-	    ErrorF("\t%d %d relative to \"%s\"\n", slp[i].x, slp[i].y,
-		   slp[i].refscreen->id);
-	    break;
-	}
-    }
-#endif
     /*
      * Count the number of inactive devices.
      */
@@ -1701,37 +1723,13 @@ configLayout(serverLayoutPtr servlayoutp, XF86ConfLayoutPtr conf_layout,
         count++;
         idp = (XF86ConfInactivePtr)idp->list.next;
     }
-    /*
-     * Count the number of input devices.
-     */
-    count = 0;
-    irp = conf_layout->lay_input_lst;
-    while (irp) {
-        count++;
-        irp = (XF86ConfInputrefPtr)irp->list.next;
-    }
-    DebugF("Found %d input devices in the layout section %s\n",
-           count, conf_layout->lay_identifier);
-    indp = xnfcalloc((count + 1), sizeof(IDevPtr));
-    indp[count] = NULL;
-    irp = conf_layout->lay_input_lst;
-    count = 0;
-    while (irp) {
-        indp[count] = xnfalloc(sizeof(IDevRec));
-	if (!configInput(indp[count], irp->iref_inputdev, X_CONFIG)) {
-            while(count--) 
-                xfree(indp[count]);
-            xfree(indp);
-            return FALSE;
-	}
-	indp[count]->extraOptions = irp->iref_option_lst;
-        count++;
-        irp = (XF86ConfInputrefPtr)irp->list.next;
-    }
+
+    if (!configInputDevices(conf_layout, servlayoutp))
+	return FALSE;
+
     servlayoutp->id = conf_layout->lay_identifier;
     servlayoutp->screens = slp;
     servlayoutp->inactives = gdp;
-    servlayoutp->inputs = indp;
     servlayoutp->options = conf_layout->lay_option_lst;
     from = X_DEFAULT;
 
@@ -1743,12 +1741,14 @@ configLayout(serverLayoutPtr servlayoutp, XF86ConfLayoutPtr conf_layout,
  * the only active screen.
  */
 static Bool
-configImpliedLayout(serverLayoutPtr servlayoutp, XF86ConfScreenPtr conf_screen)
+configImpliedLayout(serverLayoutPtr servlayoutp, XF86ConfScreenPtr conf_screen,
+                    XF86ConfigPtr xf86configptr)
 {
     MessageType from;
     XF86ConfScreenPtr s;
     screenLayoutPtr slp;
     IDevPtr *indp;
+    XF86ConfLayoutRec layout;
 
     if (!servlayoutp)
 	return FALSE;
@@ -1784,10 +1784,19 @@ configImpliedLayout(serverLayoutPtr servlayoutp, XF86ConfScreenPtr conf_screen)
     servlayoutp->screens = slp;
     servlayoutp->inactives = xnfcalloc(1, sizeof(GDevRec));
     servlayoutp->options = NULL;
-    /* Set up an empty input device list, then look for some core devices. */
-    indp = xnfalloc(sizeof(IDevPtr));
-    *indp = NULL;
-    servlayoutp->inputs = indp;
+
+    memset(&layout, 0, sizeof(layout));
+    layout.lay_identifier = servlayoutp->id;
+    if (xf86layoutAddInputDevices(xf86configptr, &layout) > 0) {
+	if (!configInputDevices(&layout, servlayoutp))
+	    return FALSE;
+	from = X_DEFAULT;
+    } else {
+	/* Set up an empty input device list, then look for some core devices. */
+	indp = xnfalloc(sizeof(IDevPtr));
+	*indp = NULL;
+	servlayoutp->inputs = indp;
+    }
 
     return TRUE;
 }
@@ -2428,34 +2437,53 @@ checkInput(serverLayoutPtr layout, Bool implicit_layout) {
 ConfigStatus
 xf86HandleConfigFile(Bool autoconfig)
 {
-    const char *filename;
-    char *searchpath;
-    MessageType from = X_DEFAULT;
+    const char *filename, *dirname;
+    char *filesearch, *dirsearch;
+    MessageType filefrom = X_DEFAULT;
+    MessageType dirfrom = X_DEFAULT;
     char *scanptr;
     Bool singlecard = 0;
     Bool implicit_layout = FALSE;
 
     if (!autoconfig) {
-	if (getuid() == 0)
-	    searchpath = ROOT_CONFIGPATH;
-	else
-	    searchpath = USER_CONFIGPATH;
+	if (getuid() == 0) {
+	    filesearch = ROOT_CONFIGPATH;
+	    dirsearch = ROOT_CONFIGDIRPATH;
+	} else {
+	    filesearch = USER_CONFIGPATH;
+	    dirsearch = USER_CONFIGDIRPATH;
+	}
 
 	if (xf86ConfigFile)
-	    from = X_CMDLINE;
+	    filefrom = X_CMDLINE;
+	if (xf86ConfigDir)
+	    dirfrom = X_CMDLINE;
 
-	filename = xf86openConfigFile(searchpath, xf86ConfigFile, PROJECTROOT);
+	xf86initConfigFiles();
+	filename = xf86openConfigFile(filesearch, xf86ConfigFile, PROJECTROOT);
+	dirname = xf86openConfigDirFiles(dirsearch, xf86ConfigDir, PROJECTROOT);
 	if (filename) {
-	    xf86MsgVerb(from, 0, "Using config file: \"%s\"\n", filename);
+	    xf86MsgVerb(filefrom, 0, "Using config file: \"%s\"\n", filename);
 	    xf86ConfigFile = xnfstrdup(filename);
 	} else {
 	    if (xf86ConfigFile)
 		xf86Msg(X_ERROR, "Unable to locate/open config file: \"%s\"\n",
 			xf86ConfigFile);
-	    return CONFIG_NOFILE;
 	}
+	if (dirname) {
+	    xf86MsgVerb(dirfrom, 0, "Using config directory: \"%s\"\n",
+			dirname);
+	    xf86ConfigDir = xnfstrdup(dirname);
+	} else {
+	    if (xf86ConfigDir)
+		xf86Msg(X_ERROR,
+			"Unable to locate/open config directory: \"%s\"\n",
+			xf86ConfigDir);
+	}
+	if (!filename && !dirname)
+	    return CONFIG_NOFILE;
     }
-     
+
     if ((xf86configptr = xf86readConfigFile ()) == NULL) {
 	xf86Msg(X_ERROR, "Problem parsing the config file\n");
 	return CONFIG_PARSE_ERROR;
@@ -2481,7 +2509,8 @@ xf86HandleConfigFile(Bool autoconfig)
 		    "No Layout section.  Using the first Screen section.\n");
 	}
 	if (!configImpliedLayout(&xf86ConfigLayout,
-				 xf86configptr->conf_screen_lst)) {
+				 xf86configptr->conf_screen_lst,
+				 xf86configptr)) {
             xf86Msg(X_ERROR, "Unable to determine the screen layout\n");
 	    return CONFIG_PARSE_ERROR;
 	}
diff --git a/xorg-server/hw/xfree86/common/xf86Globals.c b/xorg-server/hw/xfree86/common/xf86Globals.c
index 98f828483..8b483f35c 100644
--- a/xorg-server/hw/xfree86/common/xf86Globals.c
+++ b/xorg-server/hw/xfree86/common/xf86Globals.c
@@ -132,7 +132,7 @@ xf86InfoRec xf86Info = {
     .kbdCustomKeycodes          = FALSE,
     .disableRandR               = FALSE,
     .randRFrom                  = X_DEFAULT,
-#ifdef CONFIG_HAL
+#if defined(CONFIG_HAL) || defined(CONFIG_UDEV)
     .allowEmptyInput            = TRUE,
     .autoAddDevices             = TRUE,
     .autoEnableDevices          = TRUE
@@ -143,6 +143,7 @@ xf86InfoRec xf86Info = {
 #endif
 };
 const char *xf86ConfigFile = NULL;
+const char *xf86ConfigDir = NULL;
 const char *xf86ModulePath = DEFAULT_MODULE_PATH;
 MessageType xf86ModPathFrom = X_DEFAULT;
 const char *xf86LogFile = DEFAULT_LOGPREFIX;
diff --git a/xorg-server/hw/xfree86/common/xf86Init.c b/xorg-server/hw/xfree86/common/xf86Init.c
index 3b25c89a6..670744802 100644
--- a/xorg-server/hw/xfree86/common/xf86Init.c
+++ b/xorg-server/hw/xfree86/common/xf86Init.c
@@ -1387,6 +1387,19 @@ ddxProcessArgument(int argc, char **argv, int i)
     xf86ConfigFile = argv[i + 1];
     return 2;
   }
+  if (!strcmp(argv[i], "-configdir"))
+  {
+    CHECK_FOR_REQUIRED_ARGUMENT();
+    if (getuid() != 0 && !xf86PathIsSafe(argv[i + 1])) {
+      FatalError("\nInvalid argument for %s\n"
+	  "\tFor non-root users, the file specified with %s must be\n"
+	  "\ta relative path and must not contain any \"..\" elements.\n"
+	  "\tUsing default "__XCONFIGDIR__" search path.\n\n",
+	  argv[i], argv[i]);
+    }
+    xf86ConfigDir = argv[i + 1];
+    return 2;
+  }
   if (!strcmp(argv[i],"-flipPixels"))
   {
     xf86FlipPixels = TRUE;
@@ -1670,6 +1683,8 @@ ddxUseMsg(void)
   }
   ErrorF("-config file           specify a configuration file, relative to the\n");
   ErrorF("                       "__XCONFIGFILE__" search path, only root can use absolute\n");
+  ErrorF("-configdir dir         specify a configuration directory, relative to the\n");
+  ErrorF("                       "__XCONFIGDIR__" search path, only root can use absolute\n");
   ErrorF("-verbose [n]           verbose startup messages\n");
   ErrorF("-logverbose [n]        verbose log messages\n");
   ErrorF("-quiet                 minimal startup messages\n");
diff --git a/xorg-server/hw/xfree86/common/xf86Module.h b/xorg-server/hw/xfree86/common/xf86Module.h
index 8e5d5cfb5..bbf5786c9 100644
--- a/xorg-server/hw/xfree86/common/xf86Module.h
+++ b/xorg-server/hw/xfree86/common/xf86Module.h
@@ -83,7 +83,7 @@ typedef enum {
  */
 #define ABI_ANSIC_VERSION	SET_ABI_VERSION(0, 4)
 #define ABI_VIDEODRV_VERSION	SET_ABI_VERSION(7, 0)
-#define ABI_XINPUT_VERSION	SET_ABI_VERSION(8, 0)
+#define ABI_XINPUT_VERSION	SET_ABI_VERSION(9, 0)
 #define ABI_EXTENSION_VERSION	SET_ABI_VERSION(3, 0)
 #define ABI_FONT_VERSION	SET_ABI_VERSION(0, 6)
 
diff --git a/xorg-server/hw/xfree86/common/xf86Option.c b/xorg-server/hw/xfree86/common/xf86Option.c
index ad8d1c426..a2868bf21 100644
--- a/xorg-server/hw/xfree86/common/xf86Option.c
+++ b/xorg-server/hw/xfree86/common/xf86Option.c
@@ -42,6 +42,7 @@
 #include "xf86.h"
 #include "xf86Xinput.h"
 #include "xf86Optrec.h"
+#include "xf86Parser.h"
 
 static Bool ParseOptionValue(int scrnIndex, pointer options, OptionInfoPtr p,
 			     Bool markUsed);
@@ -456,29 +457,7 @@ xf86ShowUnusedOptions(int scrnIndex, pointer options)
 static Bool
 GetBoolValue(OptionInfoPtr p, const char *s)
 {
-    if (*s == '\0') {
-	p->value.bool = TRUE;
-    } else {
-	if (xf86NameCmp(s, "1") == 0)
-	    p->value.bool = TRUE;
-	else if (xf86NameCmp(s, "on") == 0)
-	    p->value.bool = TRUE;
-	else if (xf86NameCmp(s, "true") == 0)
-	    p->value.bool = TRUE;
-	else if (xf86NameCmp(s, "yes") == 0)
-	    p->value.bool = TRUE;
-	else if (xf86NameCmp(s, "0") == 0)
-	    p->value.bool = FALSE;
-	else if (xf86NameCmp(s, "off") == 0)
-	    p->value.bool = FALSE;
-	else if (xf86NameCmp(s, "false") == 0)
-	    p->value.bool = FALSE;
-	else if (xf86NameCmp(s, "no") == 0)
-	    p->value.bool = FALSE;
-	else
-	    return FALSE;
-    }
-    return TRUE;
+    return xf86getBoolValue(&p->value.bool, s);
 }
 
 static Bool
diff --git a/xorg-server/hw/xfree86/common/xf86Priv.h b/xorg-server/hw/xfree86/common/xf86Priv.h
index 3bb15718c..0612c9c4e 100644
--- a/xorg-server/hw/xfree86/common/xf86Priv.h
+++ b/xorg-server/hw/xfree86/common/xf86Priv.h
@@ -46,6 +46,7 @@
  * The global state of these things is held in xf86InfoRec (when appropriate).
  */
 extern _X_EXPORT const char *xf86ConfigFile;
+extern _X_EXPORT const char *xf86ConfigDir;
 extern _X_EXPORT  Bool xf86AllowMouseOpenFail;
 #ifdef XF86VIDMODE
 extern _X_EXPORT  Bool xf86VidModeDisabled;
diff --git a/xorg-server/hw/xfree86/common/xf86Xinput.c b/xorg-server/hw/xfree86/common/xf86Xinput.c
index f637cfe19..57db056d8 100644
--- a/xorg-server/hw/xfree86/common/xf86Xinput.c
+++ b/xorg-server/hw/xfree86/common/xf86Xinput.c
@@ -57,9 +57,11 @@
 #include <X11/Xatom.h>
 #include "xf86.h"
 #include "xf86Priv.h"
+#include "xf86Config.h"
 #include "xf86Xinput.h"
 #include "XIstubs.h"
 #include "xf86Optrec.h"
+#include "xf86Parser.h"
 #include "mipointer.h"
 #include "xf86InPriv.h"
 #include "compiler.h"
@@ -74,6 +76,11 @@
 #include "exglobals.h"
 #include "eventstr.h"
 
+#include <string.h>     /* InputClassMatches */
+#ifdef HAVE_FNMATCH_H
+#include <fnmatch.h>
+#endif
+
 #include "extnsionst.h"
 
 #include "windowstr.h"	/* screenIsSaved */
@@ -466,6 +473,85 @@ AddOtherInputDevices(void)
 {
 }
 
+/*
+ * Classes without any Match statements match all devices. Otherwise, all
+ * statements must match.
+ */
+static Bool
+InputClassMatches(XF86ConfInputClassPtr iclass, InputAttributes *attrs)
+{
+    if (iclass->match_product &&
+        (!attrs->product || !strstr(attrs->product, iclass->match_product)))
+        return False;
+    if (iclass->match_vendor &&
+        (!attrs->vendor || !strstr(attrs->vendor, iclass->match_vendor)))
+        return False;
+    if (iclass->match_device &&
+#ifdef HAVE_FNMATCH_H
+        (!attrs->device ||
+         fnmatch(iclass->match_device, attrs->device, 0) != 0))
+#else
+        (!attrs->device || !strstr(attrs->device, iclass->match_device)))
+#endif
+        return False;
+    if (iclass->is_keyboard.set &&
+        iclass->is_keyboard.val != !!(attrs->flags & ATTR_KEYBOARD))
+        return False;
+    if (iclass->is_pointer.set &&
+        iclass->is_pointer.val != !!(attrs->flags & ATTR_POINTER))
+        return False;
+    if (iclass->is_joystick.set &&
+        iclass->is_joystick.val != !!(attrs->flags & ATTR_JOYSTICK))
+        return False;
+    if (iclass->is_tablet.set &&
+        iclass->is_tablet.val != !!(attrs->flags & ATTR_TABLET))
+        return False;
+    if (iclass->is_touchpad.set &&
+        iclass->is_touchpad.val != !!(attrs->flags & ATTR_TOUCHPAD))
+        return False;
+    if (iclass->is_touchscreen.set &&
+        iclass->is_touchscreen.val != !!(attrs->flags & ATTR_TOUCHSCREEN))
+        return False;
+    return True;
+}
+
+/*
+ * Merge in any InputClass configurations. Each InputClass section can
+ * add to the original device configuration as well as any previous
+ * InputClass sections.
+ */
+static int
+MergeInputClasses(IDevPtr idev, InputAttributes *attrs)
+{
+    XF86ConfInputClassPtr cl;
+    XF86OptionPtr classopts;
+
+    for (cl = xf86configptr->conf_inputclass_lst; cl; cl = cl->list.next) {
+        if (!InputClassMatches(cl, attrs))
+            continue;
+
+        xf86Msg(X_CONFIG, "%s: Applying InputClass \"%s\"\n",
+                idev->identifier, cl->identifier);
+        if (cl->driver && !idev->driver) {
+            idev->driver = xstrdup(cl->driver);
+            if (!idev->driver) {
+                xf86Msg(X_ERROR, "Could not allocate memory while merging "
+                        "InputClass configuration");
+                return BadAlloc;
+            }
+        }
+
+        classopts = xf86optionListDup(cl->option_lst);
+        if (idev->commonOptions)
+            idev->commonOptions = xf86optionListMerge(classopts,
+                                                      idev->commonOptions);
+        else
+            idev->commonOptions = classopts;
+    }
+
+    return Success;
+}
+
 /**
  * Create a new input device, activate and enable it.
  *
@@ -568,7 +654,8 @@ unwind:
 }
 
 int
-NewInputDeviceRequest (InputOption *options, DeviceIntPtr *pdev)
+NewInputDeviceRequest (InputOption *options, InputAttributes *attrs,
+                       DeviceIntPtr *pdev)
 {
     IDevRec *idev = NULL;
     InputOption *option = NULL;
@@ -605,9 +692,9 @@ NewInputDeviceRequest (InputOption *options, DeviceIntPtr *pdev)
             }
         }
 
-        /* Right now, the only automatic config we know of is HAL. */
         if (strcmp(option->key, "_source") == 0 &&
-            strcmp(option->value, "server/hal") == 0) {
+            (strcmp(option->value, "server/hal") == 0 ||
+             strcmp(option->value, "server/udev") == 0)) {
             is_auto = 1;
             if (!xf86Info.autoAddDevices) {
                 rval = BadMatch;
@@ -615,6 +702,23 @@ NewInputDeviceRequest (InputOption *options, DeviceIntPtr *pdev)
             }
         }
     }
+
+    for (option = options; option; option = option->next) {
+        /* Steal option key/value strings from the provided list.
+         * We need those strings, the InputOption list doesn't. */
+        idev->commonOptions = xf86addNewOption(idev->commonOptions,
+                                               option->key, option->value);
+        option->key = NULL;
+        option->value = NULL;
+    }
+
+    /* Apply InputClass settings */
+    if (attrs) {
+        rval = MergeInputClasses(idev, attrs);
+        if (rval != Success)
+            goto unwind;
+    }
+
     if (!idev->driver || !idev->identifier) {
         xf86Msg(X_ERROR, "No input driver/identifier specified (ignoring)\n");
         rval = BadRequest;
@@ -626,15 +730,6 @@ NewInputDeviceRequest (InputOption *options, DeviceIntPtr *pdev)
         return BadMatch;
     }
 
-    for (option = options; option; option = option->next) {
-        /* Steal option key/value strings from the provided list.
-         * We need those strings, the InputOption list doesn't. */
-        idev->commonOptions = xf86addNewOption(idev->commonOptions,
-                                               option->key, option->value);
-        option->key = NULL;
-        option->value = NULL;
-    }
-
     rval = xf86NewInputDevice(idev, pdev,
                 (!is_auto || (is_auto && xf86Info.autoEnableDevices)));
     if (rval == Success)
diff --git a/xorg-server/hw/xfree86/doc/README.modes b/xorg-server/hw/xfree86/doc/README.modes
new file mode 100644
index 000000000..894e21313
--- /dev/null
+++ b/xorg-server/hw/xfree86/doc/README.modes
@@ -0,0 +1,474 @@
+		    Multi-monitor Mode Setting APIs
+	           Keith Packard, <keithp@keithp.com
+		   	   6 March 2007
+
+1. Introduction
+
+This document describes a set of mode setting APIs added in X server version
+1.3 that support multiple monitors per card. These interfaces expose the
+underlying hardware CRTC and output concepts to the xf86 DDX layer so that
+the implementation of initial server setup and mode changes through
+extensions can be shared across drivers. In addition, these new interfaces
+support a new configuration mechanism as well which allows each monitor to
+be customized separately providing a consistent cross-driver configuration
+mechanism that supports the full range of output features.
+
+All of the code implementing this interface can be found in hw/xfree86/modes
+in the X server sources.
+
+2. Overview
+
+This document describes both the driver API and the configuration data
+placed in xorg.conf; these are entirely separate as the driver has no
+interaction with the configuration information at all. Much of the structure
+here is cloned from the RandR extension version 1.2 additions which deal
+with the same kinds of information.
+
+2.1 API overview
+
+The mode setting API is expressed through two new driver-visible objects,
+the 'CRTC' (xf86CrtcRec) and the 'Output' (xf86OutputRec). A CRTC refers to
+hardware within the video system that can scan a subset of the framebuffer
+and generate a video signal. An Output receives that signal and transmits it
+to a monitor, projector or other device.
+
+The xf86CrtcRec and xf86OutputRec contain a small amount of state data
+related to the object along with a pointer to a set of functions provided by
+the driver that manipulate the object in fairly simple ways.
+
+To emulate older behaviour, one of the outputs is picked as the 'compat'
+output; this output changes over time as outputs are detected and used, the
+goal is to always have one 'special' output which is used for operations
+which need a single defined monitor (like XFree86-VidModeExtension mode
+setting, RandR 1.1 mode setting, DDC property setting, etc.).
+
+2.1.1 Output overview 
+
+As outputs are connected to monitors, they hold a list of modes supported by
+the monitor. If the monitor and output support DDC, then the list of modes
+generally comes from the EDID data in the monitor. Otherwise, the server
+uses the standard VESA modes, pruned by monitor timing. If the configuration
+file doesn't contain monitor timing data, the server uses default timing
+information which supports 640x480, 800x600 and 1024x768 all with a 60Hz
+refresh rate.
+
+As hardware often limits possible configuration combinations, each output
+knows the set of CRTCs that it can be connected to as well as the set of
+other outputs which can be simutaneously connected to a CRTC.
+
+2.1.2 CRTC overview
+
+CRTCs serve only to stream frame buffer data to outputs using a mode line.
+Ideally, they would not be presented to the user at all, and in fact the
+configuration file doesn't expose them. The RandR 1.2 protocol does, but the
+hope there is that client-side applications will hide them carefully away.
+
+Each crtc has an associated cursor, along with the current configuration.
+All of the data needed to determine valid configurations is contained within
+the Outputs.
+
+2.2 Configuration overview
+
+As outputs drive monitors, the "Monitor" section has been repurposed to
+define their configuration. This provides for a bit more syntax than
+the large list of driver-specific options that were used in the past for
+similar configuration.
+
+However, the existing "Monitor" section referenced by the active "Screen"
+section no longer has any use at all; some sensible meaning for this
+parameter is needed now that a Screen can have multiple Monitors.
+
+3. Public Functions
+
+3.1 PreInit functions
+
+These functions should be used during the driver PreInit phase, they are
+arranged in the order they should be invoked.
+
+    void
+    xf86CrtcConfigInit (ScrnInfoPtr			scrn
+			const xf86CrtcConfigFuncsRec	*funcs)
+
+This function allocates and initializes structures needed to track CRTC and
+Output state.
+
+    void
+    xf86CrtcSetSizeRange (ScrnInfoPtr scrn,
+			  int minWidth, int minHeight,
+			  int maxWidth, int maxHeight)
+
+This sets the range of screen sizes supported by the driver.
+
+    xf86CrtcPtr
+    xf86CrtcCreate (ScrnInfoPtr             scrn,
+		    const xf86CrtcFuncsRec  *funcs)
+    
+Create one CRTC object. See the discussion below for a description of the
+contents of the xf86CrtcFuncsRec. Note that this is done in PreInit, so it
+should not be re-invoked at each server generation. Create one of these for
+each CRTC present in the hardware.
+    
+    xf86OutputPtr
+    xf86OutputCreate (ScrnInfoPtr              scrn,
+		      const xf86OutputFuncsRec *funcs,
+		      const char	       *name)
+
+Create one Output object. See the discussion below for a description of the
+contents of the xf86OutputFuncsRec. This is also called from PreInit and
+need not be re-invoked at each ScreenInit time. An Output should be created
+for every Output present in the hardware, not just for outputs which have
+detected monitors.
+    
+    Bool
+    xf86OutputRename (xf86OutputPtr output, const char *name)
+
+If necessary, the name of an output can be changed after it is created using
+this function.
+    
+    Bool
+    xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
+
+Using the resources provided, and the configuration specified by the user,
+this function computes an initial configuration for the server. It tries to
+enable as much hardware as possible using some fairly simple heuristics. 
+
+The 'canGrow' parameter indicates that the frame buffer does not have a fixed
+size (fixed size frame buffers are required by XAA). When the frame buffer
+has a fixed size, the configuration selects a 'reasonablely large' frame
+buffer so that common reconfiguration options are possible. For resizable
+frame buffers, the frame buffer is set to the smallest size that encloses
+the desired configuration.
+    
+3.2 ScreenInit functions
+
+These functions should be used during the driver ScreenInit phase.
+
+    Bool
+    xf86DiDGAInit (ScreenPtr screen, unsigned long dga_address)
+
+This function provides driver-independent accelerated DGA support for some
+of the DGA operations; using this, the driver can avoid needing to implement
+any of the rest of DGA.
+
+    Bool
+    xf86SaveScreen(ScreenPtr pScreen, int mode)
+
+Stick this in pScreen->SaveScreen and the core X screen saver will be
+implemented by disabling outputs and crtcs using their dpms functions.
+
+    void
+    xf86DPMSSet(ScrnInfoPtr scrn, int mode, int flags)
+
+Pass this function to xf86DPMSInit and all DPMS mode switching will be
+managed by using the dpms functions provided by the Outputs and CRTCs.
+
+    Bool
+    xf86CrtcScreenInit (ScreenPtr screen)
+
+This function completes the screen initialization process for the crtc and
+output objects. Call it near the end of the ScreenInit function, after the
+frame buffer and acceleration layers have been added.
+
+3.3 EnterVT functions
+
+Functions used during EnterVT, or whenever the current configuration needs
+to be applied to the hardware.
+
+    Bool
+    xf86SetDesiredModes (ScrnInfoPtr scrn)
+
+xf86InitialConfiguration selects the desired configuration at PreInit time;
+when the server finally hits ScreenInit, xf86SetDesiredModes is used by the
+driver to take that configuration and apply it to the hardware. In addition,
+successful mode selection at other times updates the configuration that will
+be used by this function, so LeaveVT/EnterVT pairs can simply invoke this
+and return to the previous configuration.
+
+3.4 SwitchMode functions
+
+Functions called from the pScrn->SwitchMode hook, which is used by the
+XFree86-VidModeExtension and the keypad mode switch commands.
+
+    Bool
+    xf86SetSingleMode (ScrnInfoPtr	scrn, 
+		       DisplayModePtr   desired,
+		       Rotation		rotation)
+
+This function applies the specified mode to all active outputs. Which is to
+say, it picks reasonable modes for all active outputs, attempting to get the
+screen to the specified size while not breaking anything that is currently
+working.
+
+3.7 get_modes functions
+
+Functions called during output->get_modes to help build lists of modes
+
+    xf86MonPtr
+    xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus)
+
+This returns the EDID data structure for the 'output' using the I2C bus
+'pDDCBus'. This has no effect on 'output' itself.
+
+    void
+    xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon)
+
+Once the EDID data has been fetched, this call applies the EDID data to the
+output object, setting the physical size and also various properties, like
+the DDC root window property (when output is the 'compat' output), and the
+RandR 1.2 EDID output properties.
+
+    DisplayModePtr
+    xf86OutputGetEDIDModes (xf86OutputPtr output)
+
+Given an EDID data structure, this function computes a list of suitable
+modes. This function also applies a sequence of 'quirks' during this process
+so that the returned modes may not actually match the mode data present in
+the EDID data.
+
+3.6 Other functions
+
+These remaining functions in the API can be used by the driver as needed.
+
+    Bool
+    xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation,
+		     int x, int y)
+
+Applies a mode to a CRTC. All of the outputs which are currently using the
+specified CRTC are included in the mode setting process. 'x' and 'y' are the
+offset within the frame buffer that the crtc is placed at. No checking is
+done in this function to ensure that the mode is usable by the active
+outputs.
+    
+    void
+    xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY)
+
+This discards the mode lists for all outputs, re-detects monitor presence
+and then acquires new mode lists for all monitors which are not disconnected.
+Monitor configuration data is used to modify the mode lists returned by the
+outputs. 'maxX' and 'maxY' limit the maximum size modes that will be
+returned.
+    
+    void
+    xf86SetScrnInfoModes (ScrnInfoPtr pScrn)
+
+This copies the 'compat' output mode list into the pScrn modes list which is
+used by the XFree86-VidModeExtension and the keypad mode switching
+operations. The current 'desired' mode for the CRTC associated with the
+'compat' output is placed first in this list to indicate the current mode.
+Usually, the driver won't need to call this function as
+xf86InitialConfiguration will do so automatically, as well as any RandR
+functions which reprobe for modes. However, if the driver reprobes for modes
+at other times using xf86ProbeOutputModes, this function needs to be called.
+    
+    Bool
+    xf86DiDGAReInit (ScreenPtr pScreen)
+
+This is similar to xf86SetScrnInfoModes, but it applies the 'compat' output
+mode list to the set of modes advertised by the DGA extension; it needs to
+be called whenever xf86ProbeOutputModes is invoked.
+
+    void
+    xf86DisableUnusedFunctions(ScrnInfoPtr pScrn)
+
+After any sequence of calls using xf86CrtcSetMode, this function cleans up
+any leftover Output and CRTC objects by disabling them, saving power. It is
+safe to call this whenever the server is running as it only disables objects
+which are not currently in use.
+    
+4. CRTC operations
+
+4.1 CRTC functions
+
+These functions provide an abstract interface for the CRTC object; most
+manipulation of the CRTC object is done through these functions.
+
+    void
+    crtc->funcs->dpms (xf86CrtcPtr crtc, int mode)
+
+Where 'mode' is one of DPMSModeOff, DPMSModeSuspend, DPMSModeStandby or
+DPMSModeOn. This requests that the crtc go to the specified power state.
+When changing power states, the output dpms functions are invoked before the
+crtc dpms functions.
+
+    void
+    crtc->funcs->save (xf86CrtcPtr crtc)
+	
+    void
+    crtc->funcs->restore (xf86CrtcPtr crtc)
+
+Preserve/restore any register contents related to the CRTC. These are
+strictly a convenience for the driver writer; if the existing driver has
+fully operation save/restore functions, you need not place any additional
+code here. In particular, the server itself never uses this function.
+
+    Bool
+    crtc->funcs->lock (xf86CrtcPtr crtc)
+	
+    void
+    crtc->funcs->unlock (xf86CrtcPtr crtc)
+
+These functions are invoked around mode setting operations; the intent is
+that DRI locking be done here to prevent DRI applications from manipulating
+the hardware while the server is busy changing the output configuration. If
+the lock function returns FALSE, the unlock function will not be invoked.
+
+    Bool
+    crtc->funcs->mode_fixup (xf86CrtcPtr crtc, 
+			     DisplayModePtr mode,
+			     DisplayModePtr adjusted_mode)
+
+This call gives the CRTC a chance to see what mode will be set and to
+comment on the mode by changing 'adjusted_mode' as needed. This function
+shall not modify the state of the crtc hardware at all. If the CRTC cannot
+accept this mode, this function may return FALSE.
+
+    void
+    crtc->funcs->prepare (xf86CrtcPtr crtc)
+
+This call is made just before the mode is set to make the hardware ready for
+the operation. A usual function to perform here is to disable the crtc so
+that mode setting can occur with clocks turned off and outputs deactivated.
+
+    void
+    crtc->funcs->mode_set (xf86CrtcPtr crtc,
+			   DisplayModePtr mode,
+			   DisplayModePtr adjusted_mode)
+
+This function applies the specified mode (possibly adjusted by the CRTC
+and/or Outputs).
+
+    void
+    crtc->funcs->commit (xf86CrtcPtr crtc)
+
+Once the mode has been applied to the CRTC and Outputs, this function is
+invoked to let the hardware turn things back on.
+
+    void
+    crtc->funcs->gamma_set (xf86CrtcPtr crtc, CARD16 *red,
+			    CARD16 *green, CARD16 *blue, int size)
+
+This function adjusts the gamma ramps for the specified crtc.
+
+    void *
+    crtc->funcs->shadow_allocate (xf86CrtcPtr crtc, int width, int height)
+
+This function allocates frame buffer space for a shadow frame buffer. When
+allocated, the crtc must scan from the shadow instead of the main frame
+buffer. This is used for rotation. The address returned is passed to the
+shadow_create function. This function should return NULL on failure.
+
+    PixmapPtr
+    crtc->funcs->shadow_create (xf86CrtcPtr crtc, void *data,
+				int width, int height)
+
+This function creates a pixmap object that will be used as a shadow of the
+main frame buffer for CRTCs which are rotated or reflected. 'data' is the
+value returned by shadow_allocate.
+
+    void
+    crtc->funcs->shadow_destroy (xf86CrtcPtr crtc, PixmapPtr pPixmap,
+				 void *data)
+
+Destroys any associated shadow objects. If pPixmap is NULL, then a pixmap
+was not created, but 'data' may still be non-NULL indicating that the shadow
+had been allocated.
+
+    void
+    crtc->funcs->destroy (xf86CrtcPtr crtc)
+
+When a CRTC is destroyed (which only happens in error cases), this function
+can clean up any driver-specific data.
+
+4.2 CRTC fields
+
+The CRTC object is not opaque; there are several fields of interest to the
+driver writer.
+
+    struct _xf86Crtc {
+	/**
+	 * Associated ScrnInfo
+	 */
+	ScrnInfoPtr     scrn;
+    
+	/**
+	 * Active state of this CRTC
+	 *
+	 * Set when this CRTC is driving one or more outputs
+	 */
+	Bool            enabled;
+    
+	/** Track whether cursor is within CRTC range  */
+	Bool            cursorInRange;
+    
+	/** Track state of cursor associated with this CRTC */
+	Bool            cursorShown;
+    
+	/**
+	 * Active mode
+	 *
+	 * This reflects the mode as set in the CRTC currently
+	 * It will be cleared when the VT is not active or
+	 * during server startup
+	 */
+	DisplayModeRec  mode;
+	Rotation        rotation;
+	PixmapPtr       rotatedPixmap;
+	void            *rotatedData;
+    
+	/**
+	 * Position on screen
+	 *
+	 * Locates this CRTC within the frame buffer
+	 */
+	int             x, y;
+    
+	/**
+	 * Desired mode
+	 *
+	 * This is set to the requested mode, independent of
+	 * whether the VT is active. In particular, it receives
+	 * the startup configured mode and saves the active mode
+	 * on VT switch.
+	 */
+	DisplayModeRec  desiredMode;
+	Rotation        desiredRotation;
+	int             desiredX, desiredY;
+    
+	/** crtc-specific functions */
+	const xf86CrtcFuncsRec *funcs;
+    
+	/**
+	 * Driver private
+	 *
+	 * Holds driver-private information
+	 */
+	void            *driver_private;
+    #ifdef RANDR_12_INTERFACE
+	/**
+	 * RandR crtc
+	 *
+	 * When RandR 1.2 is available, this
+	 * points at the associated crtc object
+	 */
+	RRCrtcPtr       randr_crtc;
+    #else
+	void            *randr_crtc;
+    #endif
+    };
+
+    
+5. Output functions.
+
+6. Configuration
+
+Because the configuration file syntax is fixed,
+this was done by creating new "Driver" section options that hook specific
+outputs to specific "Monitor" sections in the file. The option:
+section of the form:
+
+	Option	"monitor-VGA" "My VGA Monitor"
+
+connects the VGA output of this driver to the "Monitor" section with
+Identifier "My VGA Monitor". All of the usual monitor options can now be
+placed in that "Monitor" section and will be applied to the VGA output
+configuration.
diff --git a/xorg-server/hw/xfree86/doc/man/Xorg.man.pre b/xorg-server/hw/xfree86/doc/man/Xorg.man.pre
index fe3280038..46d0e4468 100644
--- a/xorg-server/hw/xfree86/doc/man/Xorg.man.pre
+++ b/xorg-server/hw/xfree86/doc/man/Xorg.man.pre
@@ -109,7 +109,7 @@ script.
 .B __xservername__
 supports several mechanisms for supplying/obtaining configuration and
 run-time parameters: command line options, environment variables, the
-__xconfigfile__(__filemansuffix__) configuration file, auto-detection, and
+__xconfigfile__(__filemansuffix__) configuration files, auto-detection, and
 fallback defaults.  When the same information is supplied in more than
 one way, the highest precedence mechanism is used.  The list of mechanisms
 is ordered from highest precedence to lowest.  Note that not all parameters
@@ -176,6 +176,13 @@ This option will work for any file when the server is run as root (i.e,
 with real-uid 0), or for files relative to a directory in the config
 search path for all other users.
 .TP 8
+.BI \-configdir " directory"
+Read the server configuration files from
+.IR directory .
+This option will work for any directory when the server is run as root
+(i.e, with real-uid 0), or for directories relative to a directory in the
+config directory search path for all other users.
+.TP 8
 .B \-configure
 When this option is specified, the
 .B __xservername__
@@ -421,25 +428,18 @@ The
 .B __xservername__
 server is normally configured to recognize various special combinations
 of key presses that instruct the server to perform some action, rather
-than just sending the key press event to a client application.  The
-default XKEYBOARD keymap defines the key combinations listed below.
-The kbd (__drivermansuffix__) driver also has these key combinations
-builtin to its event handler
-for cases where the XKEYBOARD extension is not being used.  When using
-the XKEYBOARD extension, which key combinations perform which actions
-is completely configurable.
+than just sending the key press event to a client application. These actions
+depend on the XKB keymap loaded by a particular keyboard device and may or
+may not be available on a given configuration.
 .PP
-The special combinations of key presses recognized directly
-by
-.B __xservername__
-are:
+The following key combinations are commonly part of the default XKEYBOARD
+keymap.
 .TP 8
 .B Ctrl+Alt+Backspace
-Immediately kills the server -- no questions asked.  This is disabled by
-default.  It can be enabled with the -retro command line flag or by setting
-the
+Immediately kills the server -- no questions asked. It can be disabled by
+setting the
 .B DontZap
-__xconfigfile__(__filemansuffix__) file option to a FALSE value.
+__xconfigfile__(__filemansuffix__) file option to a TRUE value.
 .TP 8
 .B Ctrl+Alt+Keypad-Plus
 Change video mode to next one specified in the configuration file.
@@ -463,6 +463,10 @@ __xconfigfile__(__filemansuffix__) file option.
 .B __xservername__
 typically uses a configuration file called
 .B __xconfigfile__
+and configuration files with the suffix
+.I .conf
+in a directory called
+.B __xconfigdir__
 for its initial setup.
 Refer to the __xconfigfile__(__filemansuffix__) manual page for information
 about the format of this file.
@@ -471,7 +475,9 @@ about the format of this file.
 has a mechanism for automatically generating a built-in configuration
 at run-time when no
 .B __xconfigfile__
-file is present.  The current version of this automatic configuration
+file or
+.B __xconfigdir__
+files are present.  The current version of this automatic configuration
 mechanism works in two ways.
 .PP
 The first is via enhancements that have made many components of the
@@ -493,7 +499,7 @@ supported by __xservername__.  Enhancements are planned for future releases.
 .SH FILES
 The
 .B __xservername__
-server config file can be found in a range of locations.  These are
+server config files can be found in a range of locations.  These are
 documented fully in the __xconfigfile__(__filemansuffix__) manual page.  The
 most commonly used locations are shown here.
 .TP 30
@@ -512,6 +518,21 @@ Server configuration file.
 .B __projectroot__/lib/X11/__xconfigfile__
 Server configuration file.
 .TP 30
+.B /etc/X11/__xconfigdir__
+Server configuration directory.
+.TP 30
+.B /etc/X11/__xconfigdir__-4
+Server configuration directory.
+.TP 30
+.B /etc/__xconfigdir__
+Server configuration directory.
+.TP 30
+.B __projectroot__/etc/__xconfigdir__
+Server configuration directory.
+.TP 30
+.B __projectroot__/lib/X11/__xconfigdir__
+Server configuration directory.
+.TP 30
 .BI __logdir__/__xservername__. n .log
 Server log file for display
 .IR n .
diff --git a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
index ace041c92..5b98bda63 100644
--- a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
+++ b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
@@ -2,27 +2,35 @@
 .ds q \N'34'
 .TH __xconfigfile__ __filemansuffix__ __vendorversion__
 .SH NAME
-__xconfigfile__ \- configuration File for __xservername__ X server
+__xconfigfile__ and __xconfigdir__ \- configuration files for
+__xservername__ X server
 .SH INTRODUCTION
 .B __xservername__
 supports several mechanisms for supplying/obtaining configuration and
 run-time parameters: command line options, environment variables, the
-__xconfigfile__ configuration file, auto-detection, and fallback defaults.
-When the same information is supplied in more than one way, the highest
-precedence mechanism is used.  The list of mechanisms is ordered from
-highest precedence to lowest.  Note that not all parameters can be
-supplied via all methods.  The available command line options and
-environment variables (and some defaults) are described in the Xserver(__appmansuffix__)
-and __xservername__(__appmansuffix__) manual pages.  Most configuration file parameters, with
-their defaults, are described below.  Driver and module specific
-configuration parameters are described in the relevant driver or module
-manual page.
+__xconfigfile__ and __xconfigdir__ configuration files, auto-detection,
+and fallback defaults. When the same information is supplied in more
+than one way, the highest precedence mechanism is used. The list of
+mechanisms is ordered from highest precedence to lowest. Note that not
+all parameters can be supplied via all methods. The available command
+line options and environment variables (and some defaults) are
+described in the Xserver(__appmansuffix__) and
+__xservername__(__appmansuffix__) manual pages. Most configuration file
+parameters, with their defaults, are described below. Driver and module
+specific configuration parameters are described in the relevant driver
+or module manual page.
 .SH DESCRIPTION
 .B __xservername__
 uses a configuration file called
 .I __xconfigfile__
+and files ending in the suffix
+.I .conf
+from the directory
+.I __xconfigdir__
 for its initial setup.
-This configuration file is searched for in the following places when the
+The
+.I __xconfigfile__
+configuration file is searched for in the following places when the
 server is started as a normal user:
 .PP
 .RS 4
@@ -93,9 +101,28 @@ directory), and
 is the machine's hostname as reported by
 .BR gethostname (__libmansuffix__).
 .PP
+Additional configuration files are searched for in the following
+directories:
+.PP
+.RS 4
+.nf
+.I /etc/X11/__xconfigdir__\-4
+.I /etc/X11/__xconfigdir__
+.I /etc/__xconfigdir__
+.IR __projectroot__/etc/X11/__xconfigdir__. <hostname>
+.I __projectroot__/etc/X11/__xconfigdir__\-4
+.I __projectroot__/etc/X11/__xconfigdir__
+.IR __projectroot__/lib/X11/__xconfigdir__. <hostname>
+.I __projectroot__/lib/X11/__xconfigdir__\-4
+.I __projectroot__/lib/X11/__xconfigdir__
+.fi
+.RE
+.PP
 The
 .I __xconfigfile__
-file is composed of a number of sections which may be present in any order,
+and
+.I __xconfigdir__
+files are composed of a number of sections which may be present in any order,
 or omitted to use default configuration values.
 Each section has the form:
 .PP
@@ -117,6 +144,7 @@ The section names are:
 .BR "Module         " "Dynamic module loading"
 .BR "Extensions     " "Extension enabling"
 .BR "InputDevice    " "Input device description"
+.BR "InputClass     " "Input class description"
 .BR "Device         " "Graphics device description"
 .BR "VideoAdaptor   " "Xv video adaptor description"
 .BR "Monitor        " "Monitor description"
@@ -769,11 +797,28 @@ Example: the MIT-SHM extension can be disabled with the following entry:
 The config file may have multiple
 .B InputDevice
 sections.
-If HAL is not being used for input device configuration, there will normally
-be at least two: one for the core (primary) keyboard,
-and one of the core pointer.
+Recent X servers employ input hotplugging to add input devices, with the HAL
+backend being the default backend for X servers since 1.4. It is usually not
+necessary to provide
+.B InputDevice
+sections in the xorg.conf if hotplugging is enabled.
+.PP
+If hotplugging is disabled, there will normally
+be at least two: one for the core (primary) keyboard
+and one for the core pointer.
 If either of these two is missing, a default configuration for the missing
-ones will be used.
+ones will be used. In the absence of an explicitly specified core input
+device, the first
+.B InputDevice
+marked as
+.B CorePointer
+(or
+.BR CoreKeyboard )
+is used.
+If there is no match there, the first
+.B InputDevice
+that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
+The final fallback is to use built\-in default configurations.
 Currently the default configuration may not work as expected on all platforms.
 .PP
 .B InputDevice
@@ -828,17 +873,6 @@ and
 .BR mousedrv (__drivermansuffix__)
 on other platforms.
 .PP
-In the absence of an explicitly specified core input device, the first
-.B InputDevice
-marked as
-.B CorePointer
-(or
-.BR CoreKeyboard )
-is used.
-If there is no match there, the first
-.B InputDevice
-that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
-The final fallback is to use built\-in default configurations.
 .PP
 .B InputDevice
 sections recognise some driver\-independent
@@ -847,48 +881,135 @@ which are described here.
 See the individual input driver manual pages for a description of the
 device\-specific options.
 .TP 7
+.BI "Option \*qAutoServerLayout\*q  \*q" boolean \*q
+Always add the device to the ServerLayout section used by this instance of
+the server. This affects implied layouts as well as explicit layouts
+specified in the configuration and/or on the command line.
+.TP 7
 .BI "Option \*qCorePointer\*q"
-When this is set, the input device is installed as the core (primary)
-pointer device.
-There must be exactly one core pointer.
-If this option is not set here, or in the
-.B ServerLayout
-section, or from the
-.B \-pointer
-command line option, then the first input device that is capable of
-being used as a core pointer will be selected as the core pointer.
-This option is implicitly set when the obsolete
-.B Pointer
-section is used.
+Deprecated, use
+.B SendCoreEvents
+instead.
 .TP 7
 .BI "Option \*qCoreKeyboard\*q"
-When this is set, the input device is to be installed as the core
-(primary) keyboard device.
-There must be exactly one core keyboard.
-If this option is not set here, in the
-.B ServerLayout
-section, or from the
-.B \-keyboard
-command line option, then the first input device that is capable of
-being used as a core keyboard will be selected as the core keyboard.
-This option is implicitly set when the obsolete
-.B Keyboard
-section is used.
+Deprecated, use
+.B SendCoreEvents
+instead.
 .TP 7
 .BI "Option \*qAlwaysCore\*q  \*q" boolean \*q
+.B
+Deprecated, use
+.B SendCoreEvents
+instead.
 .TP 7
 .BI "Option \*qSendCoreEvents\*q  \*q" boolean \*q
 Both of these options are equivalent, and when enabled cause the
-input device to always report core events.
-This can be used, for example, to allow an additional pointer device to
-generate core pointer events (like moving the cursor, etc).
-.TP 4
-.BI "Option \*qHistorySize\*q  \*q" number \*q
-Sets the motion history size.
-Default: 0.
+input device to report core events through the master device. They are
+enabled by default.  Any device configured to send core events will be
+attached to the virtual core pointer or keyboard and control the cursor by
+default. Devices with
+.B SendCoreEvents
+disabled will be \*qfloating\*q and only accessible by clients employing the
+X Input extension. This option controls the startup behavior only, a device
+may be reattached or set floating at runtime.
 .TP 7
 .BI "Option \*qSendDragEvents\*q  \*q" boolean \*q
 ???
+.SH "INPUTCLASS SECTION"
+The config file may have multiple
+.B InputClass
+sections.
+These sections are optional and are used to provide configuration for a
+class of input devices as they are automatically added. An input device can
+match more than one
+.B InputClass
+section. Each class can only supplement settings from a previous class, so
+it is best to arrange the sections with the most generic matches last.
+.PP
+.B InputClass
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qInputClass\*q"
+.BI "    Identifier  \*q" name \*q
+.I  "    entries"
+.I  "    ..."
+.I  "    options"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+entry is required in all
+.B InputClass
+sections.
+All other entries are optional.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this input class.
+The
+.B Driver
+entry specifies the name of the driver to use for this input device.
+After all classes have been examined, the
+.RI \*q inputdriver \*q
+module from the final
+.B Driver
+entry will be enabled when using the loadable server.
+.PP
+When an input device is automatically added, its characteristics are
+checked against all
+.B InputClass
+sections. Each section can contain optional entries to narrow the match
+of the class. If none of the optional entries appear, the
+.B InputClass
+section is generic and will match any input device. If more than one of
+these entries appear, they all must match for the configuration to apply.
+The allowed matching entries are shown below.
+.PP
+.TP 7
+.BI "MatchProduct  \*q" matchproduct \*q
+This entry can be used to check if the substring
+.RI \*q matchproduct \*q
+occurs in the device's product name.
+.TP 7
+.BI "MatchVendor  \*q" matchvendor \*q
+This entry can be used to check if the substring
+.RI \*q matchvendor \*q
+occurs in the device's vendor name.
+.TP 7
+.BI "MatchDevicePath \*q" matchdevice \*q
+This entry can be used to check if the device file matches the
+.RI \*q matchdevice \*q
+pathname pattern.
+.TP 7
+.BI "MatchIsKeyboard     \*q" bool \*q
+.TP 7
+.BI "MatchIsPointer      \*q" bool \*q
+.TP 7
+.BI "MatchIsJoystick     \*q" bool \*q
+.TP 7
+.BI "MatchIsTablet       \*q" bool \*q
+.TP 7
+.BI "MatchIsTouchpad     \*q" bool \*q
+.TP 7
+.BI "MatchIsTouchscreen  \*q" bool \*q
+Match device types. These entries take a boolean argument similar to
+.B Option
+entries.
+.PP
+When an input device has been matched to the
+.B InputClass
+section, any
+.B Option
+entries are applied to the device. See the
+.B InputDevice
+section above for a description of the various
+.B Option
+entries.
 .SH "DEVICE SECTION"
 The config file may have multiple
 .B Device
diff --git a/xorg-server/hw/xfree86/exa/examodule.c b/xorg-server/hw/xfree86/exa/examodule.c
index 601288c73..bcb6a405c 100644
--- a/xorg-server/hw/xfree86/exa/examodule.c
+++ b/xorg-server/hw/xfree86/exa/examodule.c
@@ -122,24 +122,25 @@ exaDDXDriverInit(ScreenPtr pScreen)
     memcpy(pScreenPriv->options, EXAOptions, sizeof(EXAOptions));
     xf86ProcessOptions (pScrn->scrnIndex, pScrn->options, pScreenPriv->options);
 
-    if ((pExaScr->info->flags & EXA_OFFSCREEN_PIXMAPS) &&
-  	pExaScr->info->offScreenBase < pExaScr->info->memorySize)
-    {
-	char *heuristicName;
-
-	heuristicName = xf86GetOptValString (pScreenPriv->options,
-					     EXAOPT_MIGRATION_HEURISTIC);
-	if (heuristicName != NULL) {
-	    if (strcmp(heuristicName, "greedy") == 0)
-		pExaScr->migration = ExaMigrationGreedy;
-	    else if (strcmp(heuristicName, "always") == 0)
-		pExaScr->migration = ExaMigrationAlways;
-	    else if (strcmp(heuristicName, "smart") == 0)
-		pExaScr->migration = ExaMigrationSmart;
-	    else {
-		xf86DrvMsg (pScreen->myNum, X_WARNING, 
-			    "EXA: unknown migration heuristic %s\n",
-			    heuristicName);
+    if (pExaScr->info->flags & EXA_OFFSCREEN_PIXMAPS) {
+	if (!(pExaScr->info->flags & EXA_HANDLES_PIXMAPS) &&
+	    pExaScr->info->offScreenBase < pExaScr->info->memorySize) {
+	    char *heuristicName;
+
+	    heuristicName = xf86GetOptValString (pScreenPriv->options,
+						 EXAOPT_MIGRATION_HEURISTIC);
+	    if (heuristicName != NULL) {
+		if (strcmp(heuristicName, "greedy") == 0)
+		    pExaScr->migration = ExaMigrationGreedy;
+		else if (strcmp(heuristicName, "always") == 0)
+		    pExaScr->migration = ExaMigrationAlways;
+		else if (strcmp(heuristicName, "smart") == 0)
+		    pExaScr->migration = ExaMigrationSmart;
+		else {
+		    xf86DrvMsg (pScreen->myNum, X_WARNING, 
+				"EXA: unknown migration heuristic %s\n",
+				heuristicName);
+		}
 	    }
 	}
 
diff --git a/xorg-server/hw/xfree86/parser/Configint.h b/xorg-server/hw/xfree86/parser/Configint.h
index cdc7be806..03509b397 100644
--- a/xorg-server/hw/xfree86/parser/Configint.h
+++ b/xorg-server/hw/xfree86/parser/Configint.h
@@ -148,6 +148,8 @@ else\
 "The %s keyword requires a number to follow it."
 #define POSITIVE_INT_MSG \
 "The %s keyword requires a positive integer to follow it."
+#define BOOL_MSG \
+"The %s keyword requires a boolean to follow it."
 #define ZAXISMAPPING_MSG \
 "The ZAxisMapping keyword requires 2 positive numbers or X or Y to follow it."
 #define AUTOREPEAT_MSG \
diff --git a/xorg-server/hw/xfree86/parser/Input.c b/xorg-server/hw/xfree86/parser/Input.c
index 4e3c04e53..8c8e46fb4 100644
--- a/xorg-server/hw/xfree86/parser/Input.c
+++ b/xorg-server/hw/xfree86/parser/Input.c
@@ -172,13 +172,6 @@ xf86validateInput (XF86ConfigPtr p)
 {
 	XF86ConfInputPtr input = p->conf_input_lst;
 
-#if 0 /* Enable this later */
-	if (!input) {
-		xf86validationError ("At least one InputDevice section is required.");
-		return (FALSE);
-	}
-#endif
-
 	while (input) {
 		if (!input->inp_driver) {
 			xf86validationError (UNDEFINED_INPUTDRIVER_MSG, input->inp_identifier);
diff --git a/xorg-server/hw/xfree86/parser/InputClass.c b/xorg-server/hw/xfree86/parser/InputClass.c
new file mode 100644
index 000000000..1c9816012
--- /dev/null
+++ b/xorg-server/hw/xfree86/parser/InputClass.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (c) 2009 Dan Nicholson
+ *
+ * Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* View/edit this file with tab stops set to 4 */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Parser.h"
+#include "xf86tokens.h"
+#include "Configint.h"
+
+extern LexRec val;
+
+static
+xf86ConfigSymTabRec InputClassTab[] =
+{
+    {ENDSECTION, "endsection"},
+    {IDENTIFIER, "identifier"},
+    {OPTION, "option"},
+    {DRIVER, "driver"},
+    {MATCH_PRODUCT, "matchproduct"},
+    {MATCH_VENDOR, "matchvendor"},
+    {MATCH_DEVICE_PATH, "matchdevicepath"},
+    {MATCH_IS_KEYBOARD, "matchiskeyboard"},
+    {MATCH_IS_POINTER, "matchispointer"},
+    {MATCH_IS_JOYSTICK, "matchisjoystick"},
+    {MATCH_IS_TABLET, "matchistablet"},
+    {MATCH_IS_TOUCHPAD, "matchistouchpad"},
+    {MATCH_IS_TOUCHSCREEN, "matchistouchscreen"},
+    {-1, ""},
+};
+
+#define CLEANUP xf86freeInputClassList
+
+XF86ConfInputClassPtr
+xf86parseInputClassSection(void)
+{
+    int has_ident = FALSE;
+    int token;
+
+    parsePrologue(XF86ConfInputClassPtr, XF86ConfInputClassRec)
+
+    while ((token = xf86getToken(InputClassTab)) != ENDSECTION) {
+        switch (token) {
+        case COMMENT:
+            ptr->comment = xf86addComment(ptr->comment, val.str);
+            break;
+        case IDENTIFIER:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "Identifier");
+            if (has_ident == TRUE)
+                Error(MULTIPLE_MSG, "Identifier");
+            ptr->identifier = val.str;
+            has_ident = TRUE;
+            break;
+        case DRIVER:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "Driver");
+            if (strcmp(val.str, "keyboard") == 0)
+                ptr->driver = "kbd";
+            else
+                ptr->driver = val.str;
+            break;
+        case OPTION:
+            ptr->option_lst = xf86parseOption(ptr->option_lst);
+            break;
+        case MATCH_PRODUCT:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchProduct");
+            ptr->match_product = val.str;
+            break;
+        case MATCH_VENDOR:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchVendor");
+            ptr->match_vendor = val.str;
+            break;
+        case MATCH_DEVICE_PATH:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchDevicePath");
+            ptr->match_device = val.str;
+            break;
+        case MATCH_IS_KEYBOARD:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsKeyboard");
+            ptr->is_keyboard.set = xf86getBoolValue(&ptr->is_keyboard.val,
+                                                    val.str);
+            if (!ptr->is_keyboard.set)
+                Error(BOOL_MSG, "MatchIsKeyboard");
+            break;
+        case MATCH_IS_POINTER:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsPointer");
+            ptr->is_pointer.set = xf86getBoolValue(&ptr->is_pointer.val,
+                                                   val.str);
+            if (!ptr->is_pointer.set)
+                Error(BOOL_MSG, "MatchIsPointer");
+            break;
+        case MATCH_IS_JOYSTICK:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsJoystick");
+            ptr->is_joystick.set = xf86getBoolValue(&ptr->is_joystick.val,
+                                                    val.str);
+            if (!ptr->is_joystick.set)
+                Error(BOOL_MSG, "MatchIsJoystick");
+            break;
+        case MATCH_IS_TABLET:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsTablet");
+            ptr->is_tablet.set = xf86getBoolValue(&ptr->is_tablet.val,
+                                                  val.str);
+            if (!ptr->is_tablet.set)
+                Error(BOOL_MSG, "MatchIsTablet");
+            break;
+        case MATCH_IS_TOUCHPAD:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsTouchpad");
+            ptr->is_touchpad.set = xf86getBoolValue(&ptr->is_touchpad.val,
+                                                    val.str);
+            if (!ptr->is_touchpad.set)
+                Error(BOOL_MSG, "MatchIsTouchpad");
+            break;
+        case MATCH_IS_TOUCHSCREEN:
+            if (xf86getSubToken(&(ptr->comment)) != STRING)
+                Error(QUOTE_MSG, "MatchIsTouchscreen");
+            ptr->is_touchscreen.set = xf86getBoolValue(&ptr->is_touchscreen.val,
+                                                       val.str);
+            if (!ptr->is_touchscreen.set)
+                Error(BOOL_MSG, "MatchIsTouchscreen");
+            break;
+        case EOF_TOKEN:
+            Error(UNEXPECTED_EOF_MSG, NULL);
+            break;
+        default:
+            Error(INVALID_KEYWORD_MSG, xf86tokenString ());
+            break;
+        }
+    }
+
+    if (!has_ident)
+        Error(NO_IDENT_MSG, NULL);
+
+#ifdef DEBUG
+    printf("InputClass section parsed\n");
+#endif
+
+    return ptr;
+}
+
+void
+xf86printInputClassSection (FILE * cf, XF86ConfInputClassPtr ptr)
+{
+    while (ptr) {
+        fprintf(cf, "Section \"InputClass\"\n");
+        if (ptr->comment)
+            fprintf(cf, "%s", ptr->comment);
+        if (ptr->identifier)
+            fprintf(cf, "\tIdentifier      \"%s\"\n", ptr->identifier);
+        if (ptr->driver)
+            fprintf(cf, "\tDriver          \"%s\"\n", ptr->driver);
+        if (ptr->match_product)
+            fprintf(cf, "\tMatchProduct    \"%s\"\n", ptr->match_product);
+        if (ptr->match_vendor)
+            fprintf(cf, "\tMatchVendor     \"%s\"\n", ptr->match_vendor);
+        if (ptr->match_device)
+            fprintf(cf, "\tMatchDevicePath \"%s\"\n", ptr->match_device);
+        if (ptr->is_keyboard.set)
+            fprintf(cf, "\tIsKeyboard      \"%s\"\n",
+                    ptr->is_keyboard.val ? "yes" : "no");
+        if (ptr->is_pointer.set)
+            fprintf(cf, "\tIsPointer       \"%s\"\n",
+                    ptr->is_pointer.val ? "yes" : "no");
+        if (ptr->is_joystick.set)
+            fprintf(cf, "\tIsJoystick      \"%s\"\n",
+                    ptr->is_joystick.val ? "yes" : "no");
+        if (ptr->is_tablet.set)
+            fprintf(cf, "\tIsTablet        \"%s\"\n",
+                    ptr->is_tablet.val ? "yes" : "no");
+        if (ptr->is_touchpad.set)
+            fprintf(cf, "\tIsTouchpad      \"%s\"\n",
+                    ptr->is_touchpad.val ? "yes" : "no");
+        if (ptr->is_touchscreen.set)
+            fprintf(cf, "\tIsTouchscreen   \"%s\"\n",
+                    ptr->is_touchscreen.val ? "yes" : "no");
+        xf86printOptionList(cf, ptr->option_lst, 1);
+        fprintf(cf, "EndSection\n\n");
+        ptr = ptr->list.next;
+    }
+}
+
+void
+xf86freeInputClassList (XF86ConfInputClassPtr ptr)
+{
+    XF86ConfInputClassPtr prev;
+
+    while (ptr) {
+        TestFree(ptr->identifier);
+        TestFree(ptr->driver);
+        TestFree(ptr->match_product);
+        TestFree(ptr->match_vendor);
+        TestFree(ptr->match_device);
+        TestFree(ptr->comment);
+        xf86optionListFree(ptr->option_lst);
+
+        prev = ptr;
+        ptr = ptr->list.next;
+        free(prev);
+    }
+}
diff --git a/xorg-server/hw/xfree86/parser/Layout.c b/xorg-server/hw/xfree86/parser/Layout.c
index d548cd210..00c1e7d09 100644
--- a/xorg-server/hw/xfree86/parser/Layout.c
+++ b/xorg-server/hw/xfree86/parser/Layout.c
@@ -64,6 +64,10 @@
 #include "Configint.h"
 #include <string.h>
 
+
+/* Needed for auto server layout */
+extern int xf86CheckBoolOption(void* optlist, const char *name, int deflt);
+
 extern LexRec val;
 
 static xf86ConfigSymTabRec LayoutTab[] =
@@ -435,18 +439,58 @@ xf86freeLayoutList (XF86ConfLayoutPtr ptr)
 	}
 }
 
-#define CheckScreen(str, ptr)\
-if (str[0] != '\0') \
-{ \
-screen = xf86findScreen (str, p->conf_screen_lst); \
-if (!screen) \
-{ \
-	xf86validationError (UNDEFINED_SCREEN_MSG, \
-				   str, layout->lay_identifier); \
-	return (FALSE); \
-} \
-else \
-	ptr = screen; \
+int
+xf86layoutAddInputDevices(XF86ConfigPtr config, XF86ConfLayoutPtr layout)
+{
+    int count = 0;
+    XF86ConfInputPtr input = config->conf_input_lst;
+    XF86ConfInputrefPtr inptr;
+
+    /* add all AutoServerLayout devices to the server layout */
+    while (input)
+    {
+	if (xf86CheckBoolOption(input->inp_option_lst, "AutoServerLayout", FALSE))
+	{
+	    XF86ConfInputrefPtr iref = layout->lay_input_lst;
+
+	    /* avoid duplicates if referenced but lists AutoServerLayout too */
+	    while (iref)
+	    {
+		if (strcmp(iref->iref_inputdev_str, input->inp_identifier) == 0)
+		    break;
+		iref = iref->list.next;
+	    }
+
+	    if (!iref)
+	    {
+		XF86ConfInputrefPtr iptr;
+		iptr = calloc(1, sizeof(XF86ConfInputrefRec));
+		iptr->iref_inputdev_str = input->inp_identifier;
+		layout->lay_input_lst = (XF86ConfInputrefPtr)
+		    xf86addListItem((glp)layout->lay_input_lst, (glp)iptr);
+		count++;
+	    }
+	}
+	input = input->list.next;
+    }
+
+    inptr = layout->lay_input_lst;
+    while (inptr)
+    {
+	input = xf86findInput (inptr->iref_inputdev_str,
+		config->conf_input_lst);
+	if (!input)
+	{
+	    xf86validationError (UNDEFINED_INPUT_MSG,
+		    inptr->iref_inputdev_str, layout->lay_identifier);
+	    return -1;
+	}
+	else
+	    inptr->iref_inputdev = input;
+	inptr = inptr->list.next;
+    }
+
+    return count;
 }
 
 int
@@ -455,10 +499,8 @@ xf86validateLayout (XF86ConfigPtr p)
 	XF86ConfLayoutPtr layout = p->conf_layout_lst;
 	XF86ConfAdjacencyPtr adj;
 	XF86ConfInactivePtr iptr;
-	XF86ConfInputrefPtr inptr;
 	XF86ConfScreenPtr screen;
 	XF86ConfDevicePtr device;
-	XF86ConfInputPtr input;
 
 	while (layout)
 	{
@@ -476,13 +518,6 @@ xf86validateLayout (XF86ConfigPtr p)
 			else
 				adj->adj_screen = screen;
 
-#if 0
-			CheckScreen (adj->adj_top_str, adj->adj_top);
-			CheckScreen (adj->adj_bottom_str, adj->adj_bottom);
-			CheckScreen (adj->adj_left_str, adj->adj_left);
-			CheckScreen (adj->adj_right_str, adj->adj_right);
-#endif
-
 			adj = adj->list.next;
 		}
 		iptr = layout->lay_inactive_lst;
@@ -500,21 +535,10 @@ xf86validateLayout (XF86ConfigPtr p)
 				iptr->inactive_device = device;
 			iptr = iptr->list.next;
 		}
-		inptr = layout->lay_input_lst;
-		while (inptr)
-		{
-			input = xf86findInput (inptr->iref_inputdev_str,
-									p->conf_input_lst);
-			if (!input)
-			{
-				xf86validationError (UNDEFINED_INPUT_MSG,
-						inptr->iref_inputdev_str, layout->lay_identifier);
-				return (FALSE);
-			}
-			else
-				inptr->iref_inputdev = input;
-			inptr = inptr->list.next;
-		}
+
+		if (xf86layoutAddInputDevices(p, layout) == -1)
+		    return FALSE;
+
 		layout = layout->list.next;
 	}
 	return (TRUE);
diff --git a/xorg-server/hw/xfree86/parser/Makefile.am b/xorg-server/hw/xfree86/parser/Makefile.am
index b8fab2835..49c191f2a 100644
--- a/xorg-server/hw/xfree86/parser/Makefile.am
+++ b/xorg-server/hw/xfree86/parser/Makefile.am
@@ -13,6 +13,7 @@ INTERNAL_SOURCES= \
 	Files.c \
 	Flags.c \
 	Input.c \
+	InputClass.c \
 	Layout.c \
 	Module.c \
 	Video.c \
diff --git a/xorg-server/hw/xfree86/parser/configProcs.h b/xorg-server/hw/xfree86/parser/configProcs.h
index 26ba40ebb..7d8a8e53a 100644
--- a/xorg-server/hw/xfree86/parser/configProcs.h
+++ b/xorg-server/hw/xfree86/parser/configProcs.h
@@ -48,6 +48,10 @@ XF86ConfInputPtr xf86parseInputSection(void);
 void xf86printInputSection(FILE *f, XF86ConfInputPtr ptr);
 void xf86freeInputList(XF86ConfInputPtr ptr);
 int xf86validateInput (XF86ConfigPtr p);
+/* InputClass.c */
+XF86ConfInputClassPtr xf86parseInputClassSection(void);
+void xf86printInputClassSection(FILE *f, XF86ConfInputClassPtr ptr);
+void xf86freeInputClassList(XF86ConfInputClassPtr ptr);
 /* Layout.c */
 XF86ConfLayoutPtr xf86parseLayoutSection(void);
 void xf86printLayoutSection(FILE *cf, XF86ConfLayoutPtr ptr);
diff --git a/xorg-server/hw/xfree86/parser/read.c b/xorg-server/hw/xfree86/parser/read.c
index e965d209e..1091be5e5 100644
--- a/xorg-server/hw/xfree86/parser/read.c
+++ b/xorg-server/hw/xfree86/parser/read.c
@@ -177,6 +177,14 @@ xf86readConfigFile (void)
 				HANDLE_LIST (conf_input_lst, xf86parseInputSection,
 							 XF86ConfInputPtr);
 			}
+			else if (xf86nameCompare(val.str, "inputclass") == 0)
+			{
+				free(val.str);
+				val.str = NULL;
+				HANDLE_LIST (conf_inputclass_lst,
+						xf86parseInputClassSection,
+						XF86ConfInputClassPtr);
+			}
 			else if (xf86nameCompare (val.str, "module") == 0)
 			{
 				free(val.str);
diff --git a/xorg-server/hw/xfree86/parser/scan.c b/xorg-server/hw/xfree86/parser/scan.c
index d2e8b6d2b..b80fbfb8f 100644
--- a/xorg-server/hw/xfree86/parser/scan.c
+++ b/xorg-server/hw/xfree86/parser/scan.c
@@ -62,8 +62,11 @@
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
+#include <sys/types.h>
+#include <dirent.h>
 #include <unistd.h>
 #include <stdarg.h>
+#include <X11/Xdefs.h>
 #include <X11/Xfuncproto.h>
 
 #if defined(_POSIX_SOURCE)
@@ -90,17 +93,24 @@
 #include "xf86tokens.h"
 
 #define CONFIG_BUF_LEN     1024
+#define CONFIG_MAX_FILES   64
 
 static int StringToToken (char *, xf86ConfigSymTabRec *);
 
-static FILE *configFile = NULL;
+static struct {
+	FILE *file;
+	char *path;
+} configFiles[CONFIG_MAX_FILES];
 static const char **builtinConfig = NULL;
 static int builtinIndex = 0;
 static int configPos = 0;		/* current readers position */
 static int configLineNo = 0;	/* linenumber */
 static char *configBuf, *configRBuf;	/* buffer for lines */
 static char *configPath;		/* path to config file */
+static char *configDirPath;		/* path to config dir */
 static char *configSection = NULL;	/* name of current section being parsed */
+static int numFiles = 0;		/* number of config files */
+static int curFileIndex = 0;		/* index of current config file */
 static int pushToken = LOCK_TOKEN;
 static int eol_seen = 0;		/* private state to handle comments */
 LexRec val;
@@ -155,7 +165,7 @@ xf86strToUL (char *str)
 /*
  * xf86getNextLine --
  *
- *  read from the configFile FILE stream until we encounter a new
+ *  read from the configFiles FILE stream until we encounter a new
  *  line; this is effectively just a big wrapper for fgets(3).
  *
  *  xf86getToken() assumes that we will read up to the next
@@ -213,9 +223,18 @@ xf86getNextLine(void)
 	/* read in another block of chars */
 
 	do {
-		ret = fgets(configBuf + pos, configBufLen - pos - 1, configFile);
+		ret = fgets(configBuf + pos, configBufLen - pos - 1,
+			    configFiles[curFileIndex].file);
 
-		if (!ret) break;
+		if (!ret) {
+			/* stop if there are no more files */
+			if (++curFileIndex >= numFiles) {
+				curFileIndex = 0;
+				break;
+			}
+			configLineNo = 0;
+			continue;
+		}
 
 		/* search for EOL in the new block of chars */
 
@@ -306,7 +325,7 @@ again:
 		if (!c)
 		{
 			char *ret;
-			if (configFile)
+			if (numFiles > 0)
 				ret = xf86getNextLine();
 			else {
 				if (builtinConfig[builtinIndex] == NULL)
@@ -575,6 +594,12 @@ xf86pathIsSafe(const char *path)
 #ifndef XCONFIGFILE
 #define XCONFIGFILE	"xorg.conf"
 #endif
+#ifndef XCONFIGDIR
+#define XCONFIGDIR	"xorg.conf.d"
+#endif
+#ifndef XCONFIGSUFFIX
+#define XCONFIGSUFFIX	".conf"
+#endif
 #ifndef PROJECTROOT
 #define PROJECTROOT	"/usr/X11R6"
 #endif
@@ -616,7 +641,8 @@ xf86pathIsSafe(const char *path)
 
 static char *
 DoSubstitution(const char *template, const char *cmdline, const char *projroot,
-				int *cmdlineUsed, int *envUsed, char *XConfigFile)
+				int *cmdlineUsed, int *envUsed,
+				const char *XConfigFile)
 {
 	char *result;
 	int i, l;
@@ -745,7 +771,164 @@ DoSubstitution(const char *template, const char *cmdline, const char *projroot,
 	return result;
 }
 
-/* 
+/*
+ * Given some searching parameters, locate and open the xorg config file.
+ */
+static char *
+OpenConfigFile(const char *path, const char *cmdline, const char *projroot,
+	       const char *confname)
+{
+	char *filepath = NULL;
+	char *pathcopy;
+	const char *template;
+	int cmdlineUsed = 0;
+	FILE *file = NULL;
+
+	pathcopy = strdup(path);
+	for (template = strtok(pathcopy, ","); template && !file;
+	     template = strtok(NULL, ",")) {
+		filepath = DoSubstitution(template, cmdline, projroot,
+					  &cmdlineUsed, NULL, confname);
+		if (!filepath)
+			continue;
+		if (cmdline && !cmdlineUsed) {
+			free(filepath);
+			filepath = NULL;
+			continue;
+		}
+		file = fopen(filepath, "r");
+		if (!file) {
+			free(filepath);
+			filepath = NULL;
+		}
+	}
+
+	if (file) {
+		configFiles[numFiles].file = file;
+		configFiles[numFiles].path = strdup(filepath);
+		numFiles++;
+	}
+	return filepath;
+}
+
+/*
+ * Match non-hidden files in the xorg config directory with a .conf
+ * suffix. This filter is passed to scandir(3).
+ */
+static int
+ConfigFilter(const struct dirent *de)
+{
+	const char *name = de->d_name;
+	size_t len = strlen(name);
+	size_t suflen = strlen(XCONFIGSUFFIX);
+
+	if (!name || name[0] == '.' || len <= suflen)
+		return 0;
+	if (strcmp(&name[len-suflen], XCONFIGSUFFIX) != 0)
+		return 0;
+	return 1;
+}
+
+static Bool
+AddConfigDirFiles(const char *dirpath, struct dirent **list, int num)
+{
+	int i;
+	Bool openedFile = FALSE;
+	Bool warnOnce = FALSE;
+
+	for (i = 0; i < num; i++) {
+		char *path;
+		FILE *file;
+
+		if (numFiles >= CONFIG_MAX_FILES) {
+			if (!warnOnce) {
+				ErrorF("Maximum number of configuration "
+				       "files opened\n");
+				warnOnce = TRUE;
+			}
+			free(list[i]);
+			continue;
+		}
+
+		path = malloc(PATH_MAX + 1);
+		snprintf(path, PATH_MAX + 1, "%s/%s", dirpath,
+			 list[i]->d_name);
+		free(list[i]);
+		file = fopen(path, "r");
+		if (!file) {
+			free(path);
+			continue;
+		}
+		openedFile = TRUE;
+
+		configFiles[numFiles].file = file;
+		configFiles[numFiles].path = path;
+		numFiles++;
+	}
+
+	return openedFile;
+}
+
+/*
+ * Given some searching parameters, locate and open the xorg config
+ * directory. The directory does not need to contain config files.
+ */
+static char *
+OpenConfigDir(const char *path, const char *cmdline, const char *projroot,
+	      const char *confname)
+{
+	char *dirpath, *pathcopy;
+	const char *template;
+	Bool found = FALSE;
+	int cmdlineUsed = 0;
+
+	pathcopy = strdup(path);
+	for (template = strtok(pathcopy, ","); template && !found;
+	     template = strtok(NULL, ",")) {
+		struct dirent **list = NULL;
+		int num;
+
+		dirpath = DoSubstitution(template, cmdline, projroot,
+					 &cmdlineUsed, NULL, confname);
+		if (!dirpath)
+			continue;
+		if (cmdline && !cmdlineUsed) {
+			free(dirpath);
+			dirpath = NULL;
+			continue;
+		}
+
+		/* match files named *.conf */
+		num = scandir(dirpath, &list, ConfigFilter, alphasort);
+		found = AddConfigDirFiles(dirpath, list, num);
+		if (!found) {
+			free(dirpath);
+			dirpath = NULL;
+			if (list)
+				free(list);
+		}
+	}
+
+	return dirpath;
+}
+
+/*
+ * xf86initConfigFiles -- Setup global variables and buffers.
+ */
+void
+xf86initConfigFiles(void)
+{
+	curFileIndex = 0;
+	configPos = 0;
+	configLineNo = 0;
+	pushToken = LOCK_TOKEN;
+
+	configBuf = malloc(CONFIG_BUF_LEN);
+	configRBuf = malloc(CONFIG_BUF_LEN);
+	configBuf[0] = '\0';	/* sanity ... */
+}
+
+/*
  * xf86openConfigFile --
  *
  * This function take a config file search path (optional), a command-line
@@ -758,7 +941,7 @@ DoSubstitution(const char *template, const char *cmdline, const char *projroot,
  * opened.  When no file is found, the return value is NULL.
  *
  * The escape sequences allowed in the search path are defined above.
- *  
+ *
  */
 
 #ifndef DEFAULT_CONF_PATH
@@ -780,117 +963,90 @@ DoSubstitution(const char *template, const char *cmdline, const char *projroot,
 const char *
 xf86openConfigFile(const char *path, const char *cmdline, const char *projroot)
 {
-	char *pathcopy;
-	const char *template;
-	int cmdlineUsed = 0;
-
-	configFile = NULL;
-	configPos = 0;		/* current readers position */
-	configLineNo = 0;	/* linenumber */
-	pushToken = LOCK_TOKEN;
-
 	if (!path || !path[0])
 		path = DEFAULT_CONF_PATH;
-	pathcopy = malloc(strlen(path) + 1);
-	strcpy(pathcopy, path);
 	if (!projroot || !projroot[0])
 		projroot = PROJECTROOT;
 
-	template = strtok(pathcopy, ",");
-
-	/* First, search for a config file. */
-	while (template && !configFile) {
-		if ((configPath = DoSubstitution(template, cmdline, projroot,
-						 &cmdlineUsed, NULL,
-						 XCONFIGFILE))) {
-			if ((configFile = fopen(configPath, "r")) != 0) {
-				if (cmdline && !cmdlineUsed) {
-					fclose(configFile);
-					configFile = NULL;
-				}
-			}
-		}
-		if (configPath && !configFile) {
-			free(configPath);
-			configPath = NULL;
-		}
-		template = strtok(NULL, ",");
-	}
-	
-	/* Then search for fallback */
-	if (!configFile) {
-	    strcpy(pathcopy, path);
-	    template = strtok(pathcopy, ",");
-
-	    while (template && !configFile) {
-		if ((configPath = DoSubstitution(template, cmdline, projroot,
-						 &cmdlineUsed, NULL,
-						 XFREE86CFGFILE))) {
-		    if ((configFile = fopen(configPath, "r")) != 0) {
-			if (cmdline && !cmdlineUsed) {
-			    fclose(configFile);
-			    configFile = NULL;
-			}
-		    }
-		}
-		if (configPath && !configFile) {
-		    free(configPath);
-		    configPath = NULL;
-		}
-		template = strtok(NULL, ",");
-	    }
-	}
-	
-	free(pathcopy);
-	if (!configFile) {
-
-		return NULL;
-	}
+	/* Search for a config file or a fallback */
+	configPath = OpenConfigFile(path, cmdline, projroot, XCONFIGFILE);
+	if (!configPath)
+		configPath = OpenConfigFile(path, cmdline, projroot,
+					    XFREE86CFGFILE);
+	return configPath;
+}
 
-	configBuf = malloc (CONFIG_BUF_LEN);
-	configRBuf = malloc (CONFIG_BUF_LEN);
-	configBuf[0] = '\0';		/* sanity ... */
+/*
+ * xf86openConfigDirFiles --
+ *
+ * This function take a config directory search path (optional), a
+ * command-line specified directory name (optional) and the ProjectRoot path
+ * (optional) and locates and opens a config directory based on that
+ * information.  If a command-line name is specified, then this function
+ * fails if it is not found.
+ *
+ * The return value is a pointer to the actual name of the direcoty that was
+ * opened.  When no directory is found, the return value is NULL.
+ *
+ * The escape sequences allowed in the search path are defined above.
+ *
+ */
+const char *
+xf86openConfigDirFiles(const char *path, const char *cmdline,
+		       const char *projroot)
+{
+	if (!path || !path[0])
+		path = DEFAULT_CONF_PATH;
+	if (!projroot || !projroot[0])
+		projroot = PROJECTROOT;
 
-	return configPath;
+	/* Search for the multiconf directory */
+	configDirPath = OpenConfigDir(path, cmdline, projroot, XCONFIGDIR);
+	return configDirPath;
 }
 
 void
 xf86closeConfigFile (void)
 {
+	int i;
+
 	free (configPath);
 	configPath = NULL;
+	free (configDirPath);
+	configDirPath = NULL;
 	free (configRBuf);
 	configRBuf = NULL;
 	free (configBuf);
 	configBuf = NULL;
 
-	if (configFile) {
-		fclose (configFile);
-		configFile = NULL;
-	} else {
+	if (numFiles == 0) {
 		builtinConfig = NULL;
 		builtinIndex = 0;
 	}
+	for (i = 0; i < numFiles; i++) {
+		fclose(configFiles[i].file);
+		configFiles[i].file = NULL;
+		free(configFiles[i].path);
+		configFiles[i].path = NULL;
+	}
+	numFiles = 0;
 }
 
 void
 xf86setBuiltinConfig(const char *config[])
 {
 	builtinConfig = config;
-	configPath = strdup("<builtin configuration>");
-	configBuf = malloc (CONFIG_BUF_LEN);
-	configRBuf = malloc (CONFIG_BUF_LEN);
-	configBuf[0] = '\0';		/* sanity ... */
-
 }
 
 void
 xf86parseError (char *format,...)
 {
 	va_list ap;
+	char *filename = numFiles ? configFiles[curFileIndex].path :
+			 "<builtin configuration>";
 
 	ErrorF ("Parse error on line %d of section %s in file %s\n\t",
-		 configLineNo, configSection, configPath);
+		 configLineNo, configSection, filename);
 	va_start (ap, format);
 	VErrorF (format, ap);
 	va_end (ap);
@@ -902,8 +1058,10 @@ void
 xf86validationError (char *format,...)
 {
 	va_list ap;
+	char *filename = numFiles ? configFiles[curFileIndex].path :
+			 "<builtin configuration>";
 
-	ErrorF ("Data incomplete in file %s\n\t", configPath);
+	ErrorF ("Data incomplete in file %s\n\t", filename);
 	va_start (ap, format);
 	VErrorF (format, ap);
 	va_end (ap);
@@ -1028,3 +1186,33 @@ xf86addComment(char *cur, char *add)
 
 	return (cur);
 }
+
+Bool
+xf86getBoolValue(Bool *val, const char *str)
+{
+	if (!val || !str)
+		return FALSE;
+	if (*str == '\0') {
+		*val = TRUE;
+	} else {
+		if (strcmp(str, "1") == 0)
+			*val = TRUE;
+		else if (strcmp(str, "on") == 0)
+			*val = TRUE;
+		else if (strcmp(str, "true") == 0)
+			*val = TRUE;
+		else if (strcmp(str, "yes") == 0)
+			*val = TRUE;
+		else if (strcmp(str, "0") == 0)
+			*val = FALSE;
+		else if (strcmp(str, "off") == 0)
+			*val = FALSE;
+		else if (strcmp(str, "false") == 0)
+			*val = FALSE;
+		else if (strcmp(str, "no") == 0)
+			*val = FALSE;
+		else
+			return FALSE;
+	}
+	return TRUE;
+}
diff --git a/xorg-server/hw/xfree86/parser/write.c b/xorg-server/hw/xfree86/parser/write.c
index 3b77b9314..083203c05 100644
--- a/xorg-server/hw/xfree86/parser/write.c
+++ b/xorg-server/hw/xfree86/parser/write.c
@@ -117,6 +117,8 @@ doWriteConfigFile (const char *filename, XF86ConfigPtr cptr)
 
 	xf86printInputSection (cf, cptr->conf_input_lst);
 
+	xf86printInputClassSection (cf, cptr->conf_inputclass_lst);
+
 	xf86printVideoAdaptorSection (cf, cptr->conf_videoadaptor_lst);
 
 	xf86printModesSection (cf, cptr->conf_modes_lst);
diff --git a/xorg-server/hw/xfree86/parser/xf86Parser.h b/xorg-server/hw/xfree86/parser/xf86Parser.h
index 603080066..5e8351fc4 100644
--- a/xorg-server/hw/xfree86/parser/xf86Parser.h
+++ b/xorg-server/hw/xfree86/parser/xf86Parser.h
@@ -64,6 +64,7 @@
 #ifndef _xf86Parser_h_
 #define _xf86Parser_h_
 
+#include <X11/Xdefs.h>
 #include "xf86Optrec.h"
 
 #define HAVE_PARSER_DECLS
@@ -330,6 +331,32 @@ typedef struct
 }
 XF86ConfInputrefRec, *XF86ConfInputrefPtr;
 
+typedef struct
+{
+	Bool set;
+	Bool val;
+}
+xf86TriState;
+
+typedef struct
+{
+	GenericListRec list;
+	char *identifier;
+	char *driver;
+	char *match_product;
+	char *match_vendor;
+	char *match_device;
+	xf86TriState is_keyboard;
+	xf86TriState is_pointer;
+	xf86TriState is_joystick;
+	xf86TriState is_tablet;
+	xf86TriState is_touchpad;
+	xf86TriState is_touchscreen;
+	XF86OptionPtr option_lst;
+	char *comment;
+}
+XF86ConfInputClassRec, *XF86ConfInputClassPtr;
+
 /* Values for adj_where */
 #define CONF_ADJ_OBSOLETE	-1
 #define CONF_ADJ_ABSOLUTE	0
@@ -438,6 +465,7 @@ typedef struct
 	XF86ConfDevicePtr conf_device_lst;
 	XF86ConfScreenPtr conf_screen_lst;
 	XF86ConfInputPtr conf_input_lst;
+	XF86ConfInputClassPtr conf_inputclass_lst;
 	XF86ConfLayoutPtr conf_layout_lst;
 	XF86ConfVendorPtr conf_vendor_lst;
 	XF86ConfDRIPtr conf_dri;
@@ -456,13 +484,16 @@ xf86ConfigSymTabRec, *xf86ConfigSymTabPtr;
 /*
  * prototypes for public functions
  */
-extern _X_EXPORT const char *xf86openConfigFile (const char *, const char *,
-					const char *);
-extern _X_EXPORT void xf86setBuiltinConfig(const char *config[]);
-extern _X_EXPORT XF86ConfigPtr xf86readConfigFile (void);
-extern _X_EXPORT void xf86closeConfigFile (void);
-extern _X_EXPORT void xf86freeConfig (XF86ConfigPtr p);
-extern _X_EXPORT int xf86writeConfigFile (const char *, XF86ConfigPtr);
+extern void xf86initConfigFiles(void);
+extern const char *xf86openConfigFile(const char *path, const char *cmdline,
+				      const char *projroot);
+extern const char *xf86openConfigDirFiles(const char *path, const char *cmdline,
+					  const char *projroot);
+extern void xf86setBuiltinConfig(const char *config[]);
+extern XF86ConfigPtr xf86readConfigFile(void);
+extern void xf86closeConfigFile(void);
+extern void xf86freeConfig(XF86ConfigPtr p);
+extern int xf86writeConfigFile(const char *, XF86ConfigPtr);
 extern _X_EXPORT XF86ConfDevicePtr xf86findDevice(const char *ident, XF86ConfDevicePtr p);
 extern _X_EXPORT XF86ConfLayoutPtr xf86findLayout(const char *name, XF86ConfLayoutPtr list);
 extern _X_EXPORT XF86ConfMonitorPtr xf86findMonitor(const char *ident, XF86ConfMonitorPtr p);
@@ -473,6 +504,7 @@ extern _X_EXPORT XF86ConfInputPtr xf86findInput(const char *ident, XF86ConfInput
 extern _X_EXPORT XF86ConfInputPtr xf86findInputByDriver(const char *driver, XF86ConfInputPtr p);
 extern _X_EXPORT XF86ConfVideoAdaptorPtr xf86findVideoAdaptor(const char *ident,
 						XF86ConfVideoAdaptorPtr p);
+extern int xf86layoutAddInputDevices(XF86ConfigPtr config, XF86ConfLayoutPtr layout);
 
 extern _X_EXPORT GenericListPtr xf86addListItem(GenericListPtr head, GenericListPtr c_new);
 extern _X_EXPORT int xf86itemNotSublist(GenericListPtr list_1, GenericListPtr list_2);
@@ -480,5 +512,6 @@ extern _X_EXPORT int xf86itemNotSublist(GenericListPtr list_1, GenericListPtr li
 extern _X_EXPORT int xf86pathIsAbsolute(const char *path);
 extern _X_EXPORT int xf86pathIsSafe(const char *path);
 extern _X_EXPORT char *xf86addComment(char *cur, char *add);
+extern _X_EXPORT Bool xf86getBoolValue(Bool *val, const char *str);
 
 #endif /* _xf86Parser_h_ */
diff --git a/xorg-server/hw/xfree86/parser/xf86tokens.h b/xorg-server/hw/xfree86/parser/xf86tokens.h
index 4c1d38c03..e3a9d716b 100644
--- a/xorg-server/hw/xfree86/parser/xf86tokens.h
+++ b/xorg-server/hw/xfree86/parser/xf86tokens.h
@@ -273,7 +273,18 @@ typedef enum {
 
     /* DRI Tokens */
     GROUP,
-    BUFFERS
+    BUFFERS,
+
+    /* InputClass Tokens */
+    MATCH_PRODUCT,
+    MATCH_VENDOR,
+    MATCH_DEVICE_PATH,
+    MATCH_IS_KEYBOARD,
+    MATCH_IS_POINTER,
+    MATCH_IS_JOYSTICK,
+    MATCH_IS_TABLET,
+    MATCH_IS_TOUCHPAD,
+    MATCH_IS_TOUCHSCREEN
 } ParserTokens;
 
 #endif /* _xf86_tokens_h */