xserver git update 20/5/2010

19 files changed, 8487 insertions, 8527 deletions

diff --git a/xorg-server/hw/xfree86/common/xf86.h b/xorg-server/hw/xfree86/common/xf86.h
index cddca37a3..2a8b7e0a9 100644
--- a/xorg-server/hw/xfree86/common/xf86.h
+++ b/xorg-server/hw/xfree86/common/xf86.h
@@ -64,7 +64,7 @@ extern _X_EXPORT ScrnInfoPtr *xf86Screens;	/* List of pointers to ScrnInfoRecs *
 extern _X_EXPORT const unsigned char byte_reversed[256];

 extern _X_EXPORT Bool pciSlotClaimed;

 extern _X_EXPORT Bool fbSlotClaimed;

-#if defined(__sparc__) || defined(__sparc)

+#if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)

 extern _X_EXPORT Bool sbusSlotClaimed;

 #endif

 extern _X_EXPORT confDRIRec xf86ConfigDRI;

@@ -104,7 +104,6 @@ extern _X_EXPORT void xf86FormatPciBusNumber(int busnum, char *buffer);
 extern _X_EXPORT int  xf86GetFbInfoForScreen(int scrnIndex);

 extern _X_EXPORT int xf86ClaimFbSlot(DriverPtr drvp, int chipset, GDevPtr dev, Bool active);

 extern _X_EXPORT int xf86ClaimNoSlot(DriverPtr drvp, int chipset, GDevPtr dev, Bool active);

-extern _X_EXPORT void xf86EnableAccess(ScrnInfoPtr pScrn);

 extern _X_EXPORT Bool xf86IsPrimaryPci(struct pci_device * pPci);

 /* new RAC */

 extern _X_EXPORT Bool xf86DriverHasEntities(DriverPtr drvp);

diff --git a/xorg-server/hw/xfree86/common/xf86Bus.c b/xorg-server/hw/xfree86/common/xf86Bus.c
index 5c1668644..09b94654c 100644
--- a/xorg-server/hw/xfree86/common/xf86Bus.c
+++ b/xorg-server/hw/xfree86/common/xf86Bus.c
@@ -58,9 +58,139 @@ static int xf86EntityPrivateCount = 0;
 

 BusRec primaryBus = { BUS_NONE, { 0 } };

 

-static Bool xf86ResAccessEnter = FALSE;

+/**

+ * Call the driver's correct probe function.

+ *

+ * If the driver implements the \c DriverRec::PciProbe entry-point and an

+ * appropriate PCI device (with matching Device section in the xorg.conf file)

+ * is found, it is called.  If \c DriverRec::PciProbe or no devices can be

+ * successfully probed with it (e.g., only non-PCI devices are available),

+ * the driver's \c DriverRec::Probe function is called.

+ *

+ * \param drv   Driver to probe

+ *

+ * \return

+ * If a device can be successfully probed by the driver, \c TRUE is

+ * returned.  Otherwise, \c FALSE is returned.

+ */

+Bool

+xf86CallDriverProbe( DriverPtr drv, Bool detect_only )

+{

+    Bool     foundScreen = FALSE;

+

+    if (drv->PciProbe != NULL) {

+        if (xf86DoConfigure && xf86DoConfigurePass1) {

+            assert(detect_only);

+            foundScreen = xf86PciAddMatchingDev(drv);

+        }

+        else {

+            assert(! detect_only);

+            foundScreen = xf86PciProbeDev(drv);

+        }

+    }

+

+    if (!foundScreen && (drv->Probe != NULL)) {

+        xf86Msg( X_WARNING, "Falling back to old probe method for %s\n",

+                             drv->driverName);

+        foundScreen = (*drv->Probe)(drv, (detect_only) ? PROBE_DETECT

+                                    : PROBE_DEFAULT);

+    }

+

+    return foundScreen;

+}

+

+/**

+ * @return TRUE if all buses are configured and set up correctly and FALSE

+ * otherwise.

+ */

+Bool

+xf86BusConfig(void)

+{

+    screenLayoutPtr layout;

+    int i, j;

+

+    /* Enable full I/O access */

+    if (xorgHWAccess)

+        xorgHWAccess = xf86EnableIO();

+

+    /* Locate bus slot that had register IO enabled at server startup */

+    if (xorgHWAccess)

+        xf86FindPrimaryDevice();

+

+    /*

+     * Now call each of the Probe functions.  Each successful probe will

+     * result in an extra entry added to the xf86Screens[] list for each

+     * instance of the hardware found.

+     */

+    for (i = 0; i < xf86NumDrivers; i++) {

+        xorgHWFlags flags;

+        if (!xorgHWAccess) {

+            if (!xf86DriverList[i]->driverFunc

+            || !xf86DriverList[i]->driverFunc(NULL,

+                             GET_REQUIRED_HW_INTERFACES,

+                              &flags)

+            || NEED_IO_ENABLED(flags))

+            continue;

+        }

+

+        xf86CallDriverProbe(xf86DriverList[i], FALSE);

+    }

+

+    /* If nothing was detected, return now */

+    if (xf86NumScreens == 0) {

+        xf86Msg(X_ERROR, "No devices detected.\n");

+        return FALSE;

+    }

+

+    xf86VGAarbiterInit();

+

+    /*

+     * Match up the screens found by the probes against those specified

+     * in the config file.  Remove the ones that won't be used.  Sort

+     * them in the order specified.

+     *

+     * What is the best way to do this?

+     *

+     * For now, go through the screens allocated by the probes, and

+     * look for screen config entry which refers to the same device

+     * section as picked out by the probe.

+     *

+     */

+    for (i = 0; i < xf86NumScreens; i++) {

+        for (layout = xf86ConfigLayout.screens; layout->screen != NULL;

+             layout++) {

+            Bool found = FALSE;

+            for (j = 0; j < xf86Screens[i]->numEntities; j++) {

+

+                GDevPtr dev = xf86GetDevFromEntity(

+                                xf86Screens[i]->entityList[j],

+                                xf86Screens[i]->entityInstanceList[j]);

+                if (dev == layout->screen->device) {

+                    /* A match has been found */

+                    xf86Screens[i]->confScreen = layout->screen;

+                    found = TRUE;

+                    break;

+                }

+            }

+            if (found) break;

+        }

+        if (layout->screen == NULL) {

+            /* No match found */

+            xf86Msg(X_ERROR,

+            "Screen %d deleted because of no matching config section.\n", i);

+            xf86DeleteScreen(i--, 0);

+        }

+    }

 

-static Bool doFramebufferMode = FALSE;

+    /* If no screens left, return now.  */

+    if (xf86NumScreens == 0) {

+        xf86Msg(X_ERROR,

+        "Device(s) detected, but none match those in the config file.\n");

+        return FALSE;

+    }

+

+    return TRUE;

+}

 

 /*

  * Call the bus probes relevant to the architecture.

@@ -112,21 +242,6 @@ StringToBusType(const char* busID, const char **retID)
     return ret;

 }

 

-/*

- * Entity related code.

- */

-

-void

-xf86EntityInit(void)

-{

-    int i;

-    

-    for (i = 0; i < xf86NumEntities; i++)

-	if (xf86Entities[i]->entityInit) {

-	    xf86Entities[i]->entityInit(i,xf86Entities[i]->private);

-	}

-}

-

 int

 xf86AllocateEntity(void)

 {

@@ -139,28 +254,6 @@ xf86AllocateEntity(void)
     return (xf86NumEntities - 1);

 }

 

-static void

-EntityEnter(void)

-{

-    int i;

-    

-    for (i = 0; i < xf86NumEntities; i++)

-	if (xf86Entities[i]->entityEnter) {

-	    xf86Entities[i]->entityEnter(i,xf86Entities[i]->private);

-	}

-}

-

-static void

-EntityLeave(void)

-{

-    int i;

-

-    for (i = 0; i < xf86NumEntities; i++)

-	if (xf86Entities[i]->entityLeave) {

-	    xf86Entities[i]->entityLeave(i,xf86Entities[i]->private);

-	}

-}

-

 Bool

 xf86IsEntityPrimary(int entityIndex)

 {

@@ -386,72 +479,29 @@ xf86GetDevFromEntity(int entityIndex, int instance)
 }

 

 /*

- * xf86AccessInit() - set up everything needed for access control

- * called only once on first server generation.

- */

-void

-xf86AccessInit(void)

-{

-    xf86ResAccessEnter = TRUE;

-}

-

-/*

  * xf86AccessEnter() -- gets called to save the text mode VGA IO 

  * resources when reentering the server after a VT switch.

  */

 void

 xf86AccessEnter(void)

 {

-    if (xf86ResAccessEnter) 

-	return;

+    int i;

+

+    for (i = 0; i < xf86NumEntities; i++)

+        if (xf86Entities[i]->entityEnter)

+		xf86Entities[i]->entityEnter(i,xf86Entities[i]->private);

 

-    /*

-     * on enter we simply disable routing of special resources

-     * to any bus and let the RAC code to "open" the right bridges.

-     */

-    EntityEnter();

     xf86EnterServerState(SETUP);

-    xf86ResAccessEnter = TRUE;

 }

 

-/*

- * xf86AccessLeave() -- prepares access for and calls the

- * entityLeave() functions.

- * xf86AccessLeaveState() --- gets called to restore the

- * access to the VGA IO resources when switching VT or on

- * server exit.

- * This was split to call xf86AccessLeaveState() from

- * ddxGiveUp().

- */

 void

 xf86AccessLeave(void)

 {

-    if (!xf86ResAccessEnter)

-	return;

-    EntityLeave();

-}

-

-/*

- * xf86EnableAccess() -- enable access to controlled resources.

- * To reduce latency when switching access the ScrnInfoRec has

- * a linked list of the EntityAccPtr of all screen entities.

- */

-/*

- * switching access needs to be done in te following oder:

- * disable

- * 1. disable old entity

- * 2. reroute bus

- * 3. enable new entity

- * Otherwise resources needed for access control might be shadowed

- * by other resources!

- */

-

-void

-xf86EnableAccess(ScrnInfoPtr pScrn)

-{

-    DebugF("Enable access %i\n",pScrn->scrnIndex);

+    int i;

 

-    return;

+    for (i = 0; i < xf86NumEntities; i++)

+        if (xf86Entities[i]->entityLeave)

+		xf86Entities[i]->entityLeave(i,xf86Entities[i]->private);

 }

 

 /*

@@ -460,12 +510,17 @@ xf86EnableAccess(ScrnInfoPtr pScrn)
 

 typedef enum { TRI_UNSET, TRI_TRUE, TRI_FALSE } TriState;

 

-static void

-SetSIGIOForState(xf86State state)

+void

+xf86EnterServerState(xf86State state)

 {

     static int sigio_state;

     static TriState sigio_blocked = TRI_UNSET;

 

+    /*

+     * This is a good place to block SIGIO during SETUP state. SIGIO should be

+     * blocked in SETUP state otherwise (u)sleep() might get interrupted

+     * early. We take care not to call xf86BlockSIGIO() twice.

+     */

     if ((state == SETUP) && (sigio_blocked != TRI_TRUE)) {

         sigio_state = xf86BlockSIGIO();

 	sigio_blocked = TRI_TRUE;

@@ -475,24 +530,6 @@ SetSIGIOForState(xf86State state)
     }

 }

 

-void

-xf86EnterServerState(xf86State state)

-{

-    /* 

-     * This is a good place to block SIGIO during SETUP state.

-     * SIGIO should be blocked in SETUP state otherwise (u)sleep()

-     * might get interrupted early. 

-     * We take care not to call xf86BlockSIGIO() twice. 

-     */

-    SetSIGIOForState(state);

-    if (state == SETUP)

-	DebugF("Entering SETUP state\n");

-    else

-	DebugF("Entering OPERATING state\n");

-

-    return;

-}

-

 /*

  * xf86PostProbe() -- Allocate all non conflicting resources

  * This function gets called by xf86Init().

@@ -500,35 +537,25 @@ xf86EnterServerState(xf86State state)
 void

 xf86PostProbe(void)

 {

-    if (fbSlotClaimed) {

-        if (pciSlotClaimed

+    int i;

+

+    if (fbSlotClaimed && (pciSlotClaimed

 #if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)

 	    || sbusSlotClaimed

 #endif

-	    ) { 

+	    ))

 	    FatalError("Cannot run in framebuffer mode. Please specify busIDs "

 		       "       for all framebuffer devices\n");

-	    return;

-	} else  {

-	    xf86Msg(X_INFO,"Running in FRAMEBUFFER Mode\n");

-	    doFramebufferMode = TRUE;

 

-	    return;

-	}

-    }

+    for (i = 0; i < xf86NumEntities; i++)

+        if (xf86Entities[i]->entityInit)

+	    xf86Entities[i]->entityInit(i,xf86Entities[i]->private);

 }

 

 void

 xf86PostScreenInit(void)

 {

-    if (doFramebufferMode) {

-	SetSIGIOForState(OPERATING);

-	return;

-    }

-

     xf86VGAarbiterWrapFunctions();

-

-    DebugF("PostScreenInit  generation: %i\n",serverGeneration);

     xf86EnterServerState(OPERATING);

 }

 

diff --git a/xorg-server/hw/xfree86/common/xf86Configure.c b/xorg-server/hw/xfree86/common/xf86Configure.c
index 883c666a6..11dfcb848 100644
--- a/xorg-server/hw/xfree86/common/xf86Configure.c
+++ b/xorg-server/hw/xfree86/common/xf86Configure.c
@@ -322,7 +322,7 @@ configureScreenSection (int screennum)
 }

 

 static const char* 

-optionTypeToSting(OptionValueType type)

+optionTypeToString(OptionValueType type)

 {

     switch (type) {

     case OPTV_NONE:

@@ -339,6 +339,8 @@ optionTypeToSting(OptionValueType type)
         return "[<bool>]";

     case OPTV_FREQ:

         return "<freq>";

+    case OPTV_PERCENT:

+        return "<percent>";

     default:

         return "";

     }

@@ -384,7 +386,8 @@ configureDeviceSection (int screennum)
 	    "        ### Available Driver options are:-\n"

 	    "        ### Values: <i>: integer, <f>: float, "

 			"<bool>: \"True\"/\"False\",\n"

-	    "        ### <string>: \"String\", <freq>: \"<f> Hz/kHz/MHz\"\n"

+	    "        ### <string>: \"String\", <freq>: \"<f> Hz/kHz/MHz\",\n"

+	    "        ### <percent>: \"<f>%\"\n"

 	    "        ### [arg]: arg optional\n";

 	ptr->dev_comment = xstrdup(descrip);

 	if (ptr->dev_comment) {

@@ -394,7 +397,7 @@ configureDeviceSection (int screennum)
 		const char *prefix = "        #Option     ";

 		const char *middle = " \t# ";

 		const char *suffix = "\n";

-		const char *opttype = optionTypeToSting(p->type);

+		const char *opttype = optionTypeToString(p->type);

 		char *optname;

 		int len = strlen(ptr->dev_comment) + strlen(prefix) +

 			  strlen(middle) + strlen(suffix) + 1;

@@ -818,7 +821,6 @@ DoConfigure(void)
     }

 

     xf86PostProbe();

-    xf86EntityInit();

 

     for (j = 0; j < xf86NumScreens; j++) {

 	xf86Screens[j]->scrnIndex = j;

@@ -834,7 +836,6 @@ DoConfigure(void)
 

 	ConfiguredMonitor = NULL;

 

-	xf86EnableAccess(xf86Screens[dev2screen[j]]);

 	if ((*xf86Screens[dev2screen[j]]->PreInit)(xf86Screens[dev2screen[j]], 

 						   PROBE_DETECT) &&

 	    ConfiguredMonitor) {

diff --git a/xorg-server/hw/xfree86/common/xf86Init.c b/xorg-server/hw/xfree86/common/xf86Init.c
index d78d3d1db..ed9aca67c 100644
--- a/xorg-server/hw/xfree86/common/xf86Init.c
+++ b/xorg-server/hw/xfree86/common/xf86Init.c
@@ -76,6 +76,7 @@
 #include "xf86InPriv.h"

 #include "picturestr.h"

 

+#include "xf86Bus.h"

 #include "xf86VGAarbiter.h"

 #include "globals.h"

 

@@ -83,16 +84,8 @@
 #include <X11/extensions/dpmsconst.h>

 #include "dpmsproc.h"

 #endif

-

-#include <pciaccess.h>

-#include "Pci.h"

-#include "xf86Bus.h"

-

 #include <hotplug.h>

 

-/* forward declarations */

-static Bool probe_devices_from_device_sections(DriverPtr drvp);

-static Bool add_matching_devices_to_configure_list(DriverPtr drvp);

 

 #ifdef XF86PM

 void (*xf86OSPMClose)(void) = NULL;

@@ -335,201 +328,6 @@ InstallSignalHandlers(void)
     }

 }

 

-

-#define END_OF_MATCHES(m) \

-    (((m).vendor_id == 0) && ((m).device_id == 0) && ((m).subvendor_id == 0))

-

-Bool

-probe_devices_from_device_sections(DriverPtr drvp)

-{

-    int i, j;

-    struct pci_device * pPci;

-    Bool foundScreen = FALSE;

-    const struct pci_id_match * const devices = drvp->supported_devices;

-    GDevPtr *devList;

-    const unsigned numDevs = xf86MatchDevice(drvp->driverName, & devList);

-

-

-    for ( i = 0 ; i < numDevs ; i++ ) {

-	struct pci_device_iterator *iter;

-	unsigned device_id;

-

-

-	/* Find the pciVideoRec associated with this device section.

-	 */

-	iter = pci_id_match_iterator_create(NULL);

-	while ((pPci = pci_device_next(iter)) != NULL) {

-	    if (devList[i]->busID && *devList[i]->busID) {

-		if (xf86ComparePciBusString(devList[i]->busID,

-					    ((pPci->domain << 8)

-					     | pPci->bus),

-					    pPci->dev,

-					    pPci->func)) {

-		    break;

-		}

-	    }

-	    else if (xf86IsPrimaryPci(pPci)) {

-		break;

-	    }

-	}

-

-	pci_iterator_destroy(iter);

-

-	if (pPci == NULL) {

-	    continue;

-	}

-

-	device_id = (devList[i]->chipID > 0)

-	  ? devList[i]->chipID : pPci->device_id;

-

-

-	/* Once the pciVideoRec is found, determine if the device is supported

-	 * by the driver.  If it is, probe it!

-	 */

-	for ( j = 0 ; ! END_OF_MATCHES( devices[j] ) ; j++ ) {

-	    if ( PCI_ID_COMPARE( devices[j].vendor_id, pPci->vendor_id )

-		 && PCI_ID_COMPARE( devices[j].device_id, device_id )

-		 && ((devices[j].device_class_mask & pPci->device_class)

-		      == devices[j].device_class) ) {

-		int  entry;

-

-		/* Allow the same entity to be used more than once for

-		 * devices with multiple screens per entity.  This assumes

-		 * implicitly that there will be a screen == 0 instance.

-		 *

-		 * FIXME Need to make sure that two different drivers don't

-		 * FIXME claim the same screen > 0 instance.

-		 */

-		if ( (devList[i]->screen == 0) && !xf86CheckPciSlot( pPci ) )

-		  continue;

-

-		DebugF("%s: card at %d:%d:%d is claimed by a Device section\n",

-		       drvp->driverName, pPci->bus, pPci->dev, pPci->func);

-

-		/* Allocate an entry in the lists to be returned */

-		entry = xf86ClaimPciSlot(pPci, drvp, device_id,

-					  devList[i], devList[i]->active);

-

-		if ((entry == -1) && (devList[i]->screen > 0)) {

-		    unsigned k;

-

-		    for ( k = 0; k < xf86NumEntities; k++ ) {

-			EntityPtr pEnt = xf86Entities[k];

-			if (pEnt->bus.type != BUS_PCI)

-			  continue;

-

-			if (pEnt->bus.id.pci == pPci) {

-			    entry = k;

-			    xf86AddDevToEntity(k, devList[i]);

-			    break;

-			}

-		    }

-		}

-

-		if (entry != -1) {

-		    if ((*drvp->PciProbe)(drvp, entry, pPci,

-					  devices[j].match_data)) {

-			foundScreen = TRUE;

-		    } else

-			xf86UnclaimPciSlot(pPci);

-		}

-

-		break;

-	    }

-	}

-    }

-    free(devList);

-

-    return foundScreen;

-}

-

-

-Bool

-add_matching_devices_to_configure_list(DriverPtr drvp)

-{

-    const struct pci_id_match * const devices = drvp->supported_devices;

-    int j;

-    struct pci_device *pPci;

-    struct pci_device_iterator *iter;

-    int numFound = 0;

-

-

-    iter = pci_id_match_iterator_create(NULL);

-    while ((pPci = pci_device_next(iter)) != NULL) {

-	/* Determine if this device is supported by the driver.  If it is,

-	 * add it to the list of devices to configure.

-	 */

-	for (j = 0 ; ! END_OF_MATCHES(devices[j]) ; j++) {

-	    if ( PCI_ID_COMPARE( devices[j].vendor_id, pPci->vendor_id )

-		 && PCI_ID_COMPARE( devices[j].device_id, pPci->device_id )

-		 && ((devices[j].device_class_mask & pPci->device_class)

-		     == devices[j].device_class) ) {

-		if (xf86CheckPciSlot(pPci)) {

-		    GDevPtr pGDev = xf86AddBusDeviceToConfigure(

-					drvp->driverName, BUS_PCI, pPci, -1);

-		    if (pGDev != NULL) {

-			/* After configure pass 1, chipID and chipRev are

-			 * treated as over-rides, so clobber them here.

-			 */

-			pGDev->chipID = -1;

-			pGDev->chipRev = -1;

-		    }

-

-		    numFound++;

-		}

-

-		break;

-	    }

-	}

-    }

-

-    pci_iterator_destroy(iter);

-

-

-    return (numFound != 0);

-}

-

-/**

- * Call the driver's correct probe function.

- *

- * If the driver implements the \c DriverRec::PciProbe entry-point and an

- * appropriate PCI device (with matching Device section in the xorg.conf file)

- * is found, it is called.  If \c DriverRec::PciProbe or no devices can be

- * successfully probed with it (e.g., only non-PCI devices are available),

- * the driver's \c DriverRec::Probe function is called.

- *

- * \param drv   Driver to probe

- *

- * \return

- * If a device can be successfully probed by the driver, \c TRUE is

- * returned.  Otherwise, \c FALSE is returned.

- */

-Bool

-xf86CallDriverProbe( DriverPtr drv, Bool detect_only )

-{

-    Bool     foundScreen = FALSE;

-

-    if ( drv->PciProbe != NULL ) {

-	if ( xf86DoConfigure && xf86DoConfigurePass1 ) {

-	    assert( detect_only );

-	    foundScreen = add_matching_devices_to_configure_list( drv );

-	}

-	else {

-	    assert( ! detect_only );

-	    foundScreen = probe_devices_from_device_sections( drv );

-	}

-    }

-

-    if ( ! foundScreen && (drv->Probe != NULL) ) {

-	xf86Msg( X_WARNING, "Falling back to old probe method for %s\n",

-		 drv->driverName );

-	foundScreen = (*drv->Probe)( drv, (detect_only) ? PROBE_DETECT

-				     : PROBE_DEFAULT );

-    }

-

-    return foundScreen;

-}

-

 /*

  * InitOutput --

  *	Initialize screenInfo for all actually accessible framebuffers.

@@ -542,7 +340,6 @@ InitOutput(ScreenInfo *pScreenInfo, int argc, char **argv)
   int                    i, j, k, scr_index;

   char                   **modulelist;

   pointer                *optionlist;

-  screenLayoutPtr	 layout;

   Pix24Flags		 screenpix24, pix24;

   MessageType		 pix24From = X_DEFAULT;

   Bool			 pix24Fail = FALSE;

@@ -693,102 +490,10 @@ InitOutput(ScreenInfo *pScreenInfo, int argc, char **argv)
     else

 	xf86Info.dontVTSwitch = TRUE;

 

-    /* Enable full I/O access */

-    if (xorgHWAccess)

-	xorgHWAccess = xf86EnableIO();

-

-    /*

-     * Locate bus slot that had register IO enabled at server startup

-     */

-    if (xorgHWAccess) {

-        xf86AccessInit();

-        xf86FindPrimaryDevice();

-    }

-    /*

-     * Now call each of the Probe functions.  Each successful probe will

-     * result in an extra entry added to the xf86Screens[] list for each

-     * instance of the hardware found.

-     */

-

-    for (i = 0; i < xf86NumDrivers; i++) {

-	xorgHWFlags flags;

-	if (!xorgHWAccess) {

-	    if (!xf86DriverList[i]->driverFunc

-		|| !xf86DriverList[i]->driverFunc(NULL,

-						 GET_REQUIRED_HW_INTERFACES,

-						  &flags)

-		|| NEED_IO_ENABLED(flags))

-		continue;

-	}

-

-	xf86CallDriverProbe( xf86DriverList[i], FALSE );

-    }

-

-    /*

-     * If nothing was detected, return now.

-     */

-

-    if (xf86NumScreens == 0) {

-      xf86Msg(X_ERROR, "No devices detected.\n");

-      return;

-    }

-

-    xf86VGAarbiterInit();

-

-    /*

-     * Match up the screens found by the probes against those specified

-     * in the config file.  Remove the ones that won't be used.  Sort

-     * them in the order specified.

-     */

-

-    /*

-     * What is the best way to do this?

-     *

-     * For now, go through the screens allocated by the probes, and

-     * look for screen config entry which refers to the same device

-     * section as picked out by the probe.

-     *

-     */

-

-    for (i = 0; i < xf86NumScreens; i++) {

-      for (layout = xf86ConfigLayout.screens; layout->screen != NULL;

-	   layout++) {

-	  Bool found = FALSE;

-	  for (j = 0; j < xf86Screens[i]->numEntities; j++) {

-

-	      GDevPtr dev =

-		xf86GetDevFromEntity(xf86Screens[i]->entityList[j],

-				     xf86Screens[i]->entityInstanceList[j]);

-

-	      if (dev == layout->screen->device) {

-		  /* A match has been found */

-		  xf86Screens[i]->confScreen = layout->screen;

-		  found = TRUE;

-		  break;

-	      }

-	  }

-	  if (found) break;

-      }

-      if (layout->screen == NULL) {

-	/* No match found */

-	xf86Msg(X_ERROR,

-	    "Screen %d deleted because of no matching config section.\n", i);

-        xf86DeleteScreen(i--, 0);

-      }

-    }

-

-    /*

-     * If no screens left, return now.

-     */

-

-    if (xf86NumScreens == 0) {

-      xf86Msg(X_ERROR,

-	      "Device(s) detected, but none match those in the config file.\n");

-      return;

-    }

+    if (xf86BusConfig() == FALSE)

+        return;

 

     xf86PostProbe();

-    xf86EntityInit();

 

     /*

      * Sort the drivers to match the requested ording.  Using a slow

@@ -1635,20 +1340,12 @@ ddxProcessArgument(int argc, char **argv, int i)
   }

   if (!strcmp(argv[i], "-isolateDevice"))

   {

-    int bus, device, func;

     CHECK_FOR_REQUIRED_ARGUMENT();

     if (strncmp(argv[++i], "PCI:", 4)) {

        FatalError("Bus types other than PCI not yet isolable\n");

     }

-    if (sscanf(argv[i], "PCI:%d:%d:%d", &bus, &device, &func) == 3) {

-       xf86IsolateDevice.domain = PCI_DOM_FROM_BUS(bus);

-       xf86IsolateDevice.bus = PCI_BUS_NO_DOMAIN(bus);

-       xf86IsolateDevice.dev = device;

-       xf86IsolateDevice.func = func;

-       return 2;

-    } else {

-       FatalError("Invalid isolated device specification\n");

-    }

+    xf86PciIsolateDevice(argv[i]);

+    return 2;

   }

   /* Notice cmdline xkbdir, but pass to dix as well */

   if (!strcmp(argv[i], "-xkbdir"))

diff --git a/xorg-server/hw/xfree86/common/xf86Opt.h b/xorg-server/hw/xfree86/common/xf86Opt.h
index ce3d76724..3af4b4069 100644
--- a/xorg-server/hw/xfree86/common/xf86Opt.h
+++ b/xorg-server/hw/xfree86/common/xf86Opt.h
@@ -1,113 +1,117 @@
-
-/*
- * Copyright (c) 1998-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-/* Option handling things that ModuleSetup procs can use */
-
-#ifndef _XF86_OPT_H_
-#define _XF86_OPT_H_
-
-typedef struct {
-    double freq;
-    int units;
-} OptFrequency;
-
-typedef union {
-    unsigned long       num;
-    char *              str;
-    double              realnum;
-    Bool		bool;
-    OptFrequency	freq;
-} ValueUnion;
-    
-typedef enum {
-    OPTV_NONE = 0,
-    OPTV_INTEGER,
-    OPTV_STRING,                /* a non-empty string */
-    OPTV_ANYSTR,                /* Any string, including an empty one */
-    OPTV_REAL,
-    OPTV_BOOLEAN,
-    OPTV_FREQ
-} OptionValueType;
-
-typedef enum {
-    OPTUNITS_HZ = 1,
-    OPTUNITS_KHZ,
-    OPTUNITS_MHZ
-} OptFreqUnits;
-
-typedef struct {
-    int                 token;
-    const char*         name;
-    OptionValueType     type;
-    ValueUnion          value;
-    Bool                found;
-} OptionInfoRec, *OptionInfoPtr;
-
-extern _X_EXPORT int xf86SetIntOption(pointer optlist, const char *name, int deflt);
-extern _X_EXPORT double xf86SetRealOption(pointer optlist, const char *name, double deflt);
-extern _X_EXPORT char *xf86SetStrOption(pointer optlist, const char *name, char *deflt);
-extern _X_EXPORT int xf86SetBoolOption(pointer list, const char *name, int deflt );
-extern _X_EXPORT int xf86CheckIntOption(pointer optlist, const char *name, int deflt);
-extern _X_EXPORT double xf86CheckRealOption(pointer optlist, const char *name, double deflt);
-extern _X_EXPORT char *xf86CheckStrOption(pointer optlist, const char *name, char *deflt);
-extern _X_EXPORT int xf86CheckBoolOption(pointer list, const char *name, int deflt );
-extern _X_EXPORT pointer xf86AddNewOption(pointer head, const char *name, const char *val );
-extern _X_EXPORT pointer xf86NewOption(char *name, char *value );
-extern _X_EXPORT pointer xf86NextOption(pointer list );
-extern _X_EXPORT pointer xf86OptionListCreate(const char **options, int count, int used);
-extern _X_EXPORT pointer xf86OptionListMerge(pointer head, pointer tail);
-extern _X_EXPORT void xf86OptionListFree(pointer opt);
-extern _X_EXPORT char *xf86OptionName(pointer opt);
-extern _X_EXPORT char *xf86OptionValue(pointer opt);
-extern _X_EXPORT void xf86OptionListReport(pointer parm);
-extern _X_EXPORT pointer xf86FindOption(pointer options, const char *name);
-extern _X_EXPORT char *xf86FindOptionValue(pointer options, const char *name);
-extern _X_EXPORT void xf86MarkOptionUsed(pointer option);
-extern _X_EXPORT void xf86MarkOptionUsedByName(pointer options, const char *name);
-extern _X_EXPORT Bool xf86CheckIfOptionUsed(pointer option);
-extern _X_EXPORT Bool xf86CheckIfOptionUsedByName(pointer options, const char *name);
-extern _X_EXPORT void xf86ShowUnusedOptions(int scrnIndex, pointer options);
-extern _X_EXPORT void xf86ProcessOptions(int scrnIndex, pointer options, OptionInfoPtr optinfo);
-extern _X_EXPORT OptionInfoPtr xf86TokenToOptinfo(const OptionInfoRec *table, int token);
-extern _X_EXPORT const char *xf86TokenToOptName(const OptionInfoRec *table, int token);
-extern _X_EXPORT Bool xf86IsOptionSet(const OptionInfoRec *table, int token);
-extern _X_EXPORT char *xf86GetOptValString(const OptionInfoRec *table, int token);
-extern _X_EXPORT Bool xf86GetOptValInteger(const OptionInfoRec *table, int token, int *value);
-extern _X_EXPORT Bool xf86GetOptValULong(const OptionInfoRec *table, int token, unsigned long *value);
-extern _X_EXPORT Bool xf86GetOptValReal(const OptionInfoRec *table, int token, double *value);
-extern _X_EXPORT Bool xf86GetOptValFreq(const OptionInfoRec *table, int token,
-			OptFreqUnits expectedUnits, double *value);
-extern _X_EXPORT Bool xf86GetOptValBool(const OptionInfoRec *table, int token, Bool *value);
-extern _X_EXPORT Bool xf86ReturnOptValBool(const OptionInfoRec *table, int token, Bool def);
-extern _X_EXPORT int xf86NameCmp(const char *s1, const char *s2);
-extern _X_EXPORT char *xf86NormalizeName(const char *s);
-extern _X_EXPORT pointer xf86ReplaceIntOption(pointer optlist,  const char *name, const int val);
-extern _X_EXPORT pointer xf86ReplaceRealOption(pointer optlist,  const char *name, const double val);
-extern _X_EXPORT pointer xf86ReplaceBoolOption(pointer optlist, const char *name, const Bool val);
-extern _X_EXPORT pointer xf86ReplaceStrOption(pointer optlist,  const char *name, const char* val);
-#endif
+

+/*

+ * Copyright (c) 1998-2003 by The XFree86 Project, Inc.

+ *

+ * Permission is hereby granted, free of charge, to any person obtaining a

+ * copy of this software and associated documentation files (the "Software"),

+ * to deal in the Software without restriction, including without limitation

+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,

+ * and/or sell copies of the Software, and to permit persons to whom the

+ * Software is furnished to do so, subject to the following conditions:

+ *

+ * The above copyright notice and this permission notice shall be included in

+ * all copies or substantial portions of the Software.

+ *

+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR

+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

+ * OTHER DEALINGS IN THE SOFTWARE.

+ *

+ * Except as contained in this notice, the name of the copyright holder(s)

+ * and author(s) shall not be used in advertising or otherwise to promote

+ * the sale, use or other dealings in this Software without prior written

+ * authorization from the copyright holder(s) and author(s).

+ */

+

+/* Option handling things that ModuleSetup procs can use */

+

+#ifndef _XF86_OPT_H_

+#define _XF86_OPT_H_

+

+typedef struct {

+    double freq;

+    int units;

+} OptFrequency;

+

+typedef union {

+    unsigned long       num;

+    char *              str;

+    double              realnum;

+    Bool		bool;

+    OptFrequency	freq;

+} ValueUnion;

+    

+typedef enum {

+    OPTV_NONE = 0,

+    OPTV_INTEGER,

+    OPTV_STRING,                /* a non-empty string */

+    OPTV_ANYSTR,                /* Any string, including an empty one */

+    OPTV_REAL,

+    OPTV_BOOLEAN,

+    OPTV_PERCENT,

+    OPTV_FREQ

+} OptionValueType;

+

+typedef enum {

+    OPTUNITS_HZ = 1,

+    OPTUNITS_KHZ,

+    OPTUNITS_MHZ

+} OptFreqUnits;

+

+typedef struct {

+    int                 token;

+    const char*         name;

+    OptionValueType     type;

+    ValueUnion          value;

+    Bool                found;

+} OptionInfoRec, *OptionInfoPtr;

+

+extern _X_EXPORT int xf86SetIntOption(pointer optlist, const char *name, int deflt);

+extern _X_EXPORT double xf86SetRealOption(pointer optlist, const char *name, double deflt);

+extern _X_EXPORT char *xf86SetStrOption(pointer optlist, const char *name, char *deflt);

+extern _X_EXPORT int xf86SetBoolOption(pointer list, const char *name, int deflt );

+extern _X_EXPORT double xf86SetPercentOption(pointer list, const char *name, double deflt );

+extern _X_EXPORT int xf86CheckIntOption(pointer optlist, const char *name, int deflt);

+extern _X_EXPORT double xf86CheckRealOption(pointer optlist, const char *name, double deflt);

+extern _X_EXPORT char *xf86CheckStrOption(pointer optlist, const char *name, char *deflt);

+extern _X_EXPORT int xf86CheckBoolOption(pointer list, const char *name, int deflt );

+extern _X_EXPORT double xf86CheckPercentOption(pointer list, const char *name, double deflt );

+extern _X_EXPORT pointer xf86AddNewOption(pointer head, const char *name, const char *val );

+extern _X_EXPORT pointer xf86NewOption(char *name, char *value );

+extern _X_EXPORT pointer xf86NextOption(pointer list );

+extern _X_EXPORT pointer xf86OptionListCreate(const char **options, int count, int used);

+extern _X_EXPORT pointer xf86OptionListMerge(pointer head, pointer tail);

+extern _X_EXPORT void xf86OptionListFree(pointer opt);

+extern _X_EXPORT char *xf86OptionName(pointer opt);

+extern _X_EXPORT char *xf86OptionValue(pointer opt);

+extern _X_EXPORT void xf86OptionListReport(pointer parm);

+extern _X_EXPORT pointer xf86FindOption(pointer options, const char *name);

+extern _X_EXPORT char *xf86FindOptionValue(pointer options, const char *name);

+extern _X_EXPORT void xf86MarkOptionUsed(pointer option);

+extern _X_EXPORT void xf86MarkOptionUsedByName(pointer options, const char *name);

+extern _X_EXPORT Bool xf86CheckIfOptionUsed(pointer option);

+extern _X_EXPORT Bool xf86CheckIfOptionUsedByName(pointer options, const char *name);

+extern _X_EXPORT void xf86ShowUnusedOptions(int scrnIndex, pointer options);

+extern _X_EXPORT void xf86ProcessOptions(int scrnIndex, pointer options, OptionInfoPtr optinfo);

+extern _X_EXPORT OptionInfoPtr xf86TokenToOptinfo(const OptionInfoRec *table, int token);

+extern _X_EXPORT const char *xf86TokenToOptName(const OptionInfoRec *table, int token);

+extern _X_EXPORT Bool xf86IsOptionSet(const OptionInfoRec *table, int token);

+extern _X_EXPORT char *xf86GetOptValString(const OptionInfoRec *table, int token);

+extern _X_EXPORT Bool xf86GetOptValInteger(const OptionInfoRec *table, int token, int *value);

+extern _X_EXPORT Bool xf86GetOptValULong(const OptionInfoRec *table, int token, unsigned long *value);

+extern _X_EXPORT Bool xf86GetOptValReal(const OptionInfoRec *table, int token, double *value);

+extern _X_EXPORT Bool xf86GetOptValFreq(const OptionInfoRec *table, int token,

+			OptFreqUnits expectedUnits, double *value);

+extern _X_EXPORT Bool xf86GetOptValBool(const OptionInfoRec *table, int token, Bool *value);

+extern _X_EXPORT Bool xf86ReturnOptValBool(const OptionInfoRec *table, int token, Bool def);

+extern _X_EXPORT int xf86NameCmp(const char *s1, const char *s2);

+extern _X_EXPORT char *xf86NormalizeName(const char *s);

+extern _X_EXPORT pointer xf86ReplaceIntOption(pointer optlist,  const char *name, const int val);

+extern _X_EXPORT pointer xf86ReplaceRealOption(pointer optlist,  const char *name, const double val);

+extern _X_EXPORT pointer xf86ReplaceBoolOption(pointer optlist, const char *name, const Bool val);

+extern _X_EXPORT pointer xf86ReplacePercentOption(pointer optlist, const char *name, const double val);

+extern _X_EXPORT pointer xf86ReplaceStrOption(pointer optlist,  const char *name, const char* val);

+#endif

diff --git a/xorg-server/hw/xfree86/common/xf86Option.c b/xorg-server/hw/xfree86/common/xf86Option.c
index 965ce4c7d..9856a6352 100644
--- a/xorg-server/hw/xfree86/common/xf86Option.c
+++ b/xorg-server/hw/xfree86/common/xf86Option.c
@@ -223,6 +223,18 @@ LookupBoolOption(pointer optlist, const char *name, int deflt, Bool markUsed)
     return deflt;

 }

 

+static int

+LookupPercentOption(pointer optlist, const char *name, double deflt, Bool markUsed)

+{

+    OptionInfoRec o;

+

+    o.name = name;

+    o.type = OPTV_PERCENT;

+    if (ParseOptionValue(-1, optlist, &o, markUsed))

+	deflt = o.value.realnum;

+    return deflt;

+}

+

 /* These xf86Set* functions are intended for use by non-screen specific code */

 

 int

@@ -252,6 +264,12 @@ xf86SetBoolOption(pointer optlist, const char *name, int deflt)
     return LookupBoolOption(optlist, name, deflt, TRUE);

 }

 

+double

+xf86SetPercentOption(pointer optlist, const char *name, double deflt)

+{

+    return LookupPercentOption(optlist, name, deflt, TRUE);

+}

+

 /*

  * These are like the Set*Option functions, but they don't mark the options

  * as used.

@@ -283,6 +301,12 @@ xf86CheckBoolOption(pointer optlist, const char *name, int deflt)
     return LookupBoolOption(optlist, name, deflt, FALSE);

 }

 

+

+double

+xf86CheckPercentOption(pointer optlist, const char *name, double deflt)

+{

+    return LookupPercentOption(optlist, name, deflt, FALSE);

+}

 /*

  * addNewOption() has the required property of replacing the option value

  * if the option is already present.

@@ -310,6 +334,14 @@ xf86ReplaceBoolOption(pointer optlist, const char *name, const Bool val)
 }

 

 pointer

+xf86ReplacePercentOption(pointer optlist, const char *name, const double val)

+{

+    char tmp[16];

+    sprintf(tmp, "%lf%%", val);

+    return xf86AddNewOption(optlist,name,tmp);

+}

+

+pointer

 xf86ReplaceStrOption(pointer optlist, const char *name, const char* val)

 {

       return xf86AddNewOption(optlist,name,val);

@@ -533,6 +565,21 @@ ParseOptionValue(int scrnIndex, pointer options, OptionInfoPtr p,
 		p->found = FALSE;

 	    }

 	    break;

+	case OPTV_PERCENT:

+	    {

+		char tmp = 0;

+		/* awkward match, but %% doesn't increase the match counter,

+		 * hence 100 looks the same as 100% to the caller of sccanf

+		 */

+		if (sscanf(s, "%lf%c", &p->value.realnum, &tmp) != 2 || tmp != '%') {

+		    xf86DrvMsg(scrnIndex, X_WARNING,

+			       "Option \"%s\" requires a percent value\n", p->name);

+		    p->found = FALSE;

+		} else {

+		    p->found = TRUE;

+		}

+	    }

+	    break;

 	case OPTV_FREQ:	

 	    if (*s == '\0') {

 		xf86DrvMsg(scrnIndex, X_WARNING,

diff --git a/xorg-server/hw/xfree86/common/xf86Priv.h b/xorg-server/hw/xfree86/common/xf86Priv.h
index 0612c9c4e..b0a0f44cc 100644
--- a/xorg-server/hw/xfree86/common/xf86Priv.h
+++ b/xorg-server/hw/xfree86/common/xf86Priv.h
@@ -1,166 +1,165 @@
-/*
- * Copyright (c) 1997-2002 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-/*
- * This file contains declarations for private XFree86 functions and variables,
- * and definitions of private macros.
- *
- * "private" means not available to video drivers.
- */
-
-#ifndef _XF86PRIV_H
-#define _XF86PRIV_H
-
-#include <pciaccess.h>
-
-#include "xf86Privstr.h"
-#include "propertyst.h"
-#include "input.h"
-
-/*
- * Parameters set ONLY from the command line options
- * The global state of these things is held in xf86InfoRec (when appropriate).
- */
-extern _X_EXPORT const char *xf86ConfigFile;
-extern _X_EXPORT const char *xf86ConfigDir;
-extern _X_EXPORT  Bool xf86AllowMouseOpenFail;
-#ifdef XF86VIDMODE
-extern _X_EXPORT  Bool xf86VidModeDisabled;
-extern _X_EXPORT  Bool xf86VidModeAllowNonLocal;
-#endif 
-extern _X_EXPORT  Bool xf86fpFlag;
-extern _X_EXPORT  Bool xf86sFlag;
-extern _X_EXPORT  Bool xf86bsEnableFlag;
-extern _X_EXPORT  Bool xf86bsDisableFlag;
-extern _X_EXPORT  Bool xf86silkenMouseDisableFlag;
-extern _X_EXPORT  Bool xf86xkbdirFlag;
-#ifdef HAVE_ACPI
-extern _X_EXPORT  Bool xf86acpiDisableFlag;
-#endif
-extern _X_EXPORT  char *xf86LayoutName;
-extern _X_EXPORT  char *xf86ScreenName;
-extern _X_EXPORT  char *xf86PointerName;
-extern _X_EXPORT  char *xf86KeyboardName;
-extern _X_EXPORT  int xf86FbBpp;
-extern _X_EXPORT  int xf86Depth;
-extern _X_EXPORT  Pix24Flags xf86Pix24;
-extern _X_EXPORT  rgb xf86Weight;
-extern _X_EXPORT  Bool xf86FlipPixels;
-extern _X_EXPORT  Gamma xf86Gamma;
-extern _X_EXPORT  char *xf86ServerName;
-extern _X_EXPORT  struct pci_slot_match xf86IsolateDevice;
-
-/* Other parameters */
-
-extern _X_EXPORT  xf86InfoRec xf86Info;
-extern _X_EXPORT  const char *xf86ModulePath;
-extern _X_EXPORT  MessageType xf86ModPathFrom;
-extern _X_EXPORT  const char *xf86LogFile;
-extern _X_EXPORT  MessageType xf86LogFileFrom;
-extern _X_EXPORT  Bool xf86LogFileWasOpened;
-extern _X_EXPORT  serverLayoutRec xf86ConfigLayout;
-
-extern _X_EXPORT  DriverPtr *xf86DriverList;
-extern _X_EXPORT  int xf86NumDrivers;
-extern _X_EXPORT  Bool xf86Resetting;
-extern _X_EXPORT  Bool xf86Initialising;
-extern _X_EXPORT  int xf86NumScreens;
-extern _X_EXPORT  const char *xf86VisualNames[];
-extern _X_EXPORT  int xf86Verbose;                 /* verbosity level */
-extern _X_EXPORT  int xf86LogVerbose;		/* log file verbosity level */
-extern _X_EXPORT  Bool xorgHWAccess;
-
-extern _X_EXPORT  RootWinPropPtr *xf86RegisteredPropertiesTable;
-
-#ifndef DEFAULT_VERBOSE
-#define DEFAULT_VERBOSE		0
-#endif
-#ifndef DEFAULT_LOG_VERBOSE
-#define DEFAULT_LOG_VERBOSE	3
-#endif
-#ifndef DEFAULT_DPI
-#define DEFAULT_DPI		96
-#endif
-
-/* Function Prototypes */
-#ifndef _NO_XF86_PROTOTYPES
-
-/* xf86Bus.c */
-
-extern _X_EXPORT void xf86BusProbe(void);
-extern _X_EXPORT void xf86AccessInit(void);
-extern _X_EXPORT void xf86AccessEnter(void);
-extern _X_EXPORT void xf86AccessLeave(void);
-extern _X_EXPORT void xf86EntityInit(void);
-
-extern _X_EXPORT void xf86FindPrimaryDevice(void);
-/* new RAC */
-extern _X_EXPORT void xf86PostProbe(void);
-extern _X_EXPORT void xf86ClearEntityListForScreen(int scrnIndex);
-extern _X_EXPORT void xf86AddDevToEntity(int entityIndex, GDevPtr dev);
-extern _X_EXPORT void xf86PostScreenInit(void);
-
-/* xf86Config.c */
-
-extern _X_EXPORT Bool xf86PathIsSafe(const char *path);
-
-/* xf86DefaultModes */
-
-extern _X_EXPORT const DisplayModeRec xf86DefaultModes[];
-extern _X_EXPORT const int xf86NumDefaultModes;
-
-/* xf86Configure.c */
-extern _X_EXPORT void DoConfigure(void);
-
-/* xf86ShowOpts.c */
-extern _X_EXPORT void DoShowOptions(void);
-
-/* xf86Events.c */
-
-extern _X_EXPORT void xf86Wakeup(pointer blockData, int err, pointer pReadmask);
-extern _X_HIDDEN int xf86SigWrapper(int signo);
-extern _X_EXPORT void xf86HandlePMEvents(int fd, pointer data);
-extern _X_EXPORT int (*xf86PMGetEventFromOs)(int fd,pmEvent *events,int num);
-extern _X_EXPORT pmWait (*xf86PMConfirmEventToOs)(int fd,pmEvent event);
-
-/* xf86Helper.c */
-extern _X_EXPORT void xf86LogInit(void);
-extern _X_EXPORT void xf86CloseLog(void);
-
-/* xf86Init.c */
-extern _X_EXPORT Bool xf86LoadModules(char **list, pointer *optlist);
-extern _X_EXPORT int xf86SetVerbosity(int verb);
-extern _X_EXPORT int xf86SetLogVerbosity(int verb);
-extern _X_EXPORT Bool xf86CallDriverProbe( struct _DriverRec * drv, Bool detect_only );
-
-/* xf86Xinput.c */
-extern _X_EXPORT EventList *xf86Events;
-
-#endif /* _NO_XF86_PROTOTYPES */
-
-
-#endif /* _XF86PRIV_H */
+/*

+ * Copyright (c) 1997-2002 by The XFree86 Project, Inc.

+ *

+ * Permission is hereby granted, free of charge, to any person obtaining a

+ * copy of this software and associated documentation files (the "Software"),

+ * to deal in the Software without restriction, including without limitation

+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,

+ * and/or sell copies of the Software, and to permit persons to whom the

+ * Software is furnished to do so, subject to the following conditions:

+ *

+ * The above copyright notice and this permission notice shall be included in

+ * all copies or substantial portions of the Software.

+ *

+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR

+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

+ * OTHER DEALINGS IN THE SOFTWARE.

+ *

+ * Except as contained in this notice, the name of the copyright holder(s)

+ * and author(s) shall not be used in advertising or otherwise to promote

+ * the sale, use or other dealings in this Software without prior written

+ * authorization from the copyright holder(s) and author(s).

+ */

+

+/*

+ * This file contains declarations for private XFree86 functions and variables,

+ * and definitions of private macros.

+ *

+ * "private" means not available to video drivers.

+ */

+

+#ifndef _XF86PRIV_H

+#define _XF86PRIV_H

+

+#include <pciaccess.h>

+

+#include "xf86Privstr.h"

+#include "propertyst.h"

+#include "input.h"

+

+/*

+ * Parameters set ONLY from the command line options

+ * The global state of these things is held in xf86InfoRec (when appropriate).

+ */

+extern _X_EXPORT const char *xf86ConfigFile;

+extern _X_EXPORT const char *xf86ConfigDir;

+extern _X_EXPORT  Bool xf86AllowMouseOpenFail;

+#ifdef XF86VIDMODE

+extern _X_EXPORT  Bool xf86VidModeDisabled;

+extern _X_EXPORT  Bool xf86VidModeAllowNonLocal;

+#endif 

+extern _X_EXPORT  Bool xf86fpFlag;

+extern _X_EXPORT  Bool xf86sFlag;

+extern _X_EXPORT  Bool xf86bsEnableFlag;

+extern _X_EXPORT  Bool xf86bsDisableFlag;

+extern _X_EXPORT  Bool xf86silkenMouseDisableFlag;

+extern _X_EXPORT  Bool xf86xkbdirFlag;

+#ifdef HAVE_ACPI

+extern _X_EXPORT  Bool xf86acpiDisableFlag;

+#endif

+extern _X_EXPORT  char *xf86LayoutName;

+extern _X_EXPORT  char *xf86ScreenName;

+extern _X_EXPORT  char *xf86PointerName;

+extern _X_EXPORT  char *xf86KeyboardName;

+extern _X_EXPORT  int xf86FbBpp;

+extern _X_EXPORT  int xf86Depth;

+extern _X_EXPORT  Pix24Flags xf86Pix24;

+extern _X_EXPORT  rgb xf86Weight;

+extern _X_EXPORT  Bool xf86FlipPixels;

+extern _X_EXPORT  Gamma xf86Gamma;

+extern _X_EXPORT  char *xf86ServerName;

+extern _X_EXPORT  struct pci_slot_match xf86IsolateDevice;

+

+/* Other parameters */

+

+extern _X_EXPORT  xf86InfoRec xf86Info;

+extern _X_EXPORT  const char *xf86ModulePath;

+extern _X_EXPORT  MessageType xf86ModPathFrom;

+extern _X_EXPORT  const char *xf86LogFile;

+extern _X_EXPORT  MessageType xf86LogFileFrom;

+extern _X_EXPORT  Bool xf86LogFileWasOpened;

+extern _X_EXPORT  serverLayoutRec xf86ConfigLayout;

+

+extern _X_EXPORT  DriverPtr *xf86DriverList;

+extern _X_EXPORT  int xf86NumDrivers;

+extern _X_EXPORT  Bool xf86Resetting;

+extern _X_EXPORT  Bool xf86Initialising;

+extern _X_EXPORT  int xf86NumScreens;

+extern _X_EXPORT  const char *xf86VisualNames[];

+extern _X_EXPORT  int xf86Verbose;                 /* verbosity level */

+extern _X_EXPORT  int xf86LogVerbose;		/* log file verbosity level */

+extern _X_EXPORT  Bool xorgHWAccess;

+

+extern _X_EXPORT  RootWinPropPtr *xf86RegisteredPropertiesTable;

+

+#ifndef DEFAULT_VERBOSE

+#define DEFAULT_VERBOSE		0

+#endif

+#ifndef DEFAULT_LOG_VERBOSE

+#define DEFAULT_LOG_VERBOSE	3

+#endif

+#ifndef DEFAULT_DPI

+#define DEFAULT_DPI		96

+#endif

+

+/* Function Prototypes */

+#ifndef _NO_XF86_PROTOTYPES

+

+/* xf86Bus.c */

+

+extern _X_EXPORT Bool xf86BusConfig(void);

+extern _X_EXPORT void xf86BusProbe(void);

+extern _X_EXPORT void xf86AccessEnter(void);

+extern _X_EXPORT void xf86AccessLeave(void);

+

+extern _X_EXPORT void xf86FindPrimaryDevice(void);

+/* new RAC */

+extern _X_EXPORT void xf86PostProbe(void);

+extern _X_EXPORT void xf86ClearEntityListForScreen(int scrnIndex);

+extern _X_EXPORT void xf86AddDevToEntity(int entityIndex, GDevPtr dev);

+extern _X_EXPORT void xf86PostScreenInit(void);

+

+/* xf86Config.c */

+

+extern _X_EXPORT Bool xf86PathIsSafe(const char *path);

+

+/* xf86DefaultModes */

+

+extern _X_EXPORT const DisplayModeRec xf86DefaultModes[];

+extern _X_EXPORT const int xf86NumDefaultModes;

+

+/* xf86Configure.c */

+extern _X_EXPORT void DoConfigure(void);

+

+/* xf86ShowOpts.c */

+extern _X_EXPORT void DoShowOptions(void);

+

+/* xf86Events.c */

+

+extern _X_EXPORT void xf86Wakeup(pointer blockData, int err, pointer pReadmask);

+extern _X_HIDDEN int xf86SigWrapper(int signo);

+extern _X_EXPORT void xf86HandlePMEvents(int fd, pointer data);

+extern _X_EXPORT int (*xf86PMGetEventFromOs)(int fd,pmEvent *events,int num);

+extern _X_EXPORT pmWait (*xf86PMConfirmEventToOs)(int fd,pmEvent event);

+

+/* xf86Helper.c */

+extern _X_EXPORT void xf86LogInit(void);

+extern _X_EXPORT void xf86CloseLog(void);

+

+/* xf86Init.c */

+extern _X_EXPORT Bool xf86LoadModules(char **list, pointer *optlist);

+extern _X_EXPORT int xf86SetVerbosity(int verb);

+extern _X_EXPORT int xf86SetLogVerbosity(int verb);

+extern _X_EXPORT Bool xf86CallDriverProbe( struct _DriverRec * drv, Bool detect_only );

+

+/* xf86Xinput.c */

+extern _X_EXPORT EventList *xf86Events;

+

+#endif /* _NO_XF86_PROTOTYPES */

+

+

+#endif /* _XF86PRIV_H */

diff --git a/xorg-server/hw/xfree86/common/xf86ShowOpts.c b/xorg-server/hw/xfree86/common/xf86ShowOpts.c
index 77f156486..831e6b787 100644
--- a/xorg-server/hw/xfree86/common/xf86ShowOpts.c
+++ b/xorg-server/hw/xfree86/common/xf86ShowOpts.c
@@ -70,6 +70,8 @@ optionTypeToSting(OptionValueType type)
         return "<bool>";

     case OPTV_FREQ:

         return "<freq>";

+    case OPTV_PERCENT:

+        return "<percent>";

     default:

         return "<undef>";

     }

diff --git a/xorg-server/hw/xfree86/common/xf86pciBus.c b/xorg-server/hw/xfree86/common/xf86pciBus.c
index b3164730c..925751256 100644
--- a/xorg-server/hw/xfree86/common/xf86pciBus.c
+++ b/xorg-server/hw/xfree86/common/xf86pciBus.c
@@ -420,4 +420,164 @@ xf86CheckPciSlot(const struct pci_device *d)
     return TRUE;

 }

 

+#define END_OF_MATCHES(m) \

+    (((m).vendor_id == 0) && ((m).device_id == 0) && ((m).subvendor_id == 0))

 

+Bool

+xf86PciAddMatchingDev(DriverPtr drvp)

+{

+    const struct pci_id_match * const devices = drvp->supported_devices;

+    int j;

+    struct pci_device *pPci;

+    struct pci_device_iterator *iter;

+    int numFound = 0;

+

+

+    iter = pci_id_match_iterator_create(NULL);

+    while ((pPci = pci_device_next(iter)) != NULL) {

+    /* Determine if this device is supported by the driver.  If it is,

+     * add it to the list of devices to configure.

+     */

+    for (j = 0 ; ! END_OF_MATCHES(devices[j]) ; j++) {

+        if ( PCI_ID_COMPARE( devices[j].vendor_id, pPci->vendor_id )

+         && PCI_ID_COMPARE( devices[j].device_id, pPci->device_id )

+         && ((devices[j].device_class_mask & pPci->device_class)

+             == devices[j].device_class) ) {

+        if (xf86CheckPciSlot(pPci)) {

+            GDevPtr pGDev = xf86AddBusDeviceToConfigure(

+                    drvp->driverName, BUS_PCI, pPci, -1);

+            if (pGDev != NULL) {

+            /* After configure pass 1, chipID and chipRev are

+             * treated as over-rides, so clobber them here.

+             */

+            pGDev->chipID = -1;

+            pGDev->chipRev = -1;

+            }

+

+            numFound++;

+        }

+

+        break;

+        }

+    }

+    }

+

+    pci_iterator_destroy(iter);

+

+    return (numFound != 0);

+}

+

+Bool

+xf86PciProbeDev(DriverPtr drvp)

+{

+    int i, j;

+    struct pci_device * pPci;

+    Bool foundScreen = FALSE;

+    const struct pci_id_match * const devices = drvp->supported_devices;

+    GDevPtr *devList;

+    const unsigned numDevs = xf86MatchDevice(drvp->driverName, & devList);

+

+    for ( i = 0 ; i < numDevs ; i++ ) {

+       struct pci_device_iterator *iter;

+       unsigned device_id;

+

+

+       /* Find the pciVideoRec associated with this device section.

+        */

+       iter = pci_id_match_iterator_create(NULL);

+       while ((pPci = pci_device_next(iter)) != NULL) {

+           if (devList[i]->busID && *devList[i]->busID) {

+               if (xf86ComparePciBusString(devList[i]->busID,

+                                           ((pPci->domain << 8)

+                                            | pPci->bus),

+                                           pPci->dev,

+                                           pPci->func)) {

+                   break;

+               }

+           }

+           else if (xf86IsPrimaryPci(pPci)) {

+               break;

+           }

+       }

+

+       pci_iterator_destroy(iter);

+

+       if (pPci == NULL) {

+           continue;

+       }

+       device_id = (devList[i]->chipID > 0)

+         ? devList[i]->chipID : pPci->device_id;

+

+

+       /* Once the pciVideoRec is found, determine if the device is supported

+        * by the driver.  If it is, probe it!

+        */

+       for ( j = 0 ; ! END_OF_MATCHES( devices[j] ) ; j++ ) {

+           if ( PCI_ID_COMPARE( devices[j].vendor_id, pPci->vendor_id )

+                && PCI_ID_COMPARE( devices[j].device_id, device_id )

+                && ((devices[j].device_class_mask & pPci->device_class)

+                     == devices[j].device_class) ) {

+               int  entry;

+

+               /* Allow the same entity to be used more than once for

+                * devices with multiple screens per entity.  This assumes

+                * implicitly that there will be a screen == 0 instance.

+                *

+                * FIXME Need to make sure that two different drivers don't

+                * FIXME claim the same screen > 0 instance.

+                */

+               if ((devList[i]->screen == 0) && !xf86CheckPciSlot(pPci))

+                   continue;

+

+               DebugF("%s: card at %d:%d:%d is claimed by a Device section\n",

+                      drvp->driverName, pPci->bus, pPci->dev, pPci->func);

+

+               /* Allocate an entry in the lists to be returned */

+               entry = xf86ClaimPciSlot(pPci, drvp, device_id,

+                                         devList[i], devList[i]->active);

+

+               if ((entry == -1) && (devList[i]->screen > 0)) {

+                   unsigned k;

+

+                   for (k = 0; k < xf86NumEntities; k++ ) {

+                       EntityPtr pEnt = xf86Entities[k];

+                       if (pEnt->bus.type != BUS_PCI)

+                           continue;

+                       if (pEnt->bus.id.pci == pPci) {

+                           entry = k;

+                           xf86AddDevToEntity(k, devList[i]);

+                           break;

+                       }

+                   }

+               }

+

+               if (entry != -1) {

+                   if ((*drvp->PciProbe)(drvp, entry, pPci,

+                                         devices[j].match_data)) {

+                       foundScreen = TRUE;

+                   } else

+                       xf86UnclaimPciSlot(pPci);

+               }

+

+               break;

+           }

+       }

+    }

+    free(devList);

+

+    return foundScreen;

+}

+

+void

+xf86PciIsolateDevice(char *argument)

+{

+    int bus, device, func;

+

+    if (sscanf(argument, "PCI:%d:%d:%d", &bus, &device, &func) == 3) {

+        xf86IsolateDevice.domain = PCI_DOM_FROM_BUS(bus);

+        xf86IsolateDevice.bus = PCI_BUS_NO_DOMAIN(bus);

+        xf86IsolateDevice.dev = device;

+        xf86IsolateDevice.func = func;

+    } else

+        FatalError("Invalid isolated device specification\n");

+}

diff --git a/xorg-server/hw/xfree86/common/xf86pciBus.h b/xorg-server/hw/xfree86/common/xf86pciBus.h
index 3125e0db8..b534645ee 100644
--- a/xorg-server/hw/xfree86/common/xf86pciBus.h
+++ b/xorg-server/hw/xfree86/common/xf86pciBus.h
@@ -1,38 +1,41 @@
-
-/*
- * Copyright (c) 1999-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#ifndef _XF86_PCI_BUS_H
-#define _XF86_PCI_BUS_H
-
-void xf86PciProbe(void);
-
-#endif /* _XF86_PCI_BUS_H */
+

+/*

+ * Copyright (c) 1999-2003 by The XFree86 Project, Inc.

+ *

+ * Permission is hereby granted, free of charge, to any person obtaining a

+ * copy of this software and associated documentation files (the "Software"),

+ * to deal in the Software without restriction, including without limitation

+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,

+ * and/or sell copies of the Software, and to permit persons to whom the

+ * Software is furnished to do so, subject to the following conditions:

+ *

+ * The above copyright notice and this permission notice shall be included in

+ * all copies or substantial portions of the Software.

+ *

+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR

+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,

+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

+ * OTHER DEALINGS IN THE SOFTWARE.

+ *

+ * Except as contained in this notice, the name of the copyright holder(s)

+ * and author(s) shall not be used in advertising or otherwise to promote

+ * the sale, use or other dealings in this Software without prior written

+ * authorization from the copyright holder(s) and author(s).

+ */

+

+#ifdef HAVE_XORG_CONFIG_H

+#include <xorg-config.h>

+#endif

+

+#ifndef _XF86_PCI_BUS_H

+#define _XF86_PCI_BUS_H

+

+void xf86PciProbe(void);

+Bool xf86PciAddMatchingDev(DriverPtr drvp);

+Bool xf86PciProbeDev(DriverPtr drvp);

+void xf86PciIsolateDevice(char *argument);

+

+#endif /* _XF86_PCI_BUS_H */

diff --git a/xorg-server/hw/xfree86/dixmods/extmod/xf86dga2.c b/xorg-server/hw/xfree86/dixmods/extmod/xf86dga2.c
index fae8d8b5d..0b7d62dca 100644
--- a/xorg-server/hw/xfree86/dixmods/extmod/xf86dga2.c
+++ b/xorg-server/hw/xfree86/dixmods/extmod/xf86dga2.c
@@ -436,7 +436,7 @@ ProcXDGAInstallColormap(ClientPtr client)
     rc = dixLookupResourceByType((pointer *)&cmap, stuff->cmap, RT_COLORMAP,

 				 client, DixInstallAccess);

     if (rc != Success)

-        return (rc == BadValue) ? BadColor : rc;

+        return rc;

     DGAInstallCmap(cmap);

     return Success;

 }

@@ -878,7 +878,7 @@ ProcXF86DGAInstallColormap(ClientPtr client)
 	DGAInstallCmap(pcmp);

         return Success;

     } else {

-        return (rc == BadValue) ? BadColor : rc;

+        return rc;

     }

 }

 

diff --git a/xorg-server/hw/xfree86/dixmods/extmod/xf86vmode.c b/xorg-server/hw/xfree86/dixmods/extmod/xf86vmode.c
index 483b92ab1..f29f5bad2 100644
--- a/xorg-server/hw/xfree86/dixmods/extmod/xf86vmode.c
+++ b/xorg-server/hw/xfree86/dixmods/extmod/xf86vmode.c
@@ -331,7 +331,6 @@ SendXF86VidModeNotify(ScreenPtr pScreen, int state, Bool forced)
     XF86VidModeEventPtr		pEv;

     unsigned long		mask;

     xXF86VidModeNotifyEvent	ev;

-    ClientPtr			client;

     int				kind;

 

     UpdateCurrentTimeIf ();

@@ -343,19 +342,15 @@ SendXF86VidModeNotify(ScreenPtr pScreen, int state, Bool forced)
     kind = XF86VidModeModeChange;

     for (pEv = pPriv->events; pEv; pEv = pEv->next)

     {

-	client = pEv->client;

-	if (client->clientGone)

-	    continue;

 	if (!(pEv->mask & mask))

 	    continue;

 	ev.type = XF86VidModeNotify + XF86VidModeEventBase;

 	ev.state = state;

-	ev.sequenceNumber = client->sequence;

 	ev.timestamp = currentTime.milliseconds;

 	ev.root = WindowTable[pScreen->myNum]->drawable.id;

 	ev.kind = kind;

 	ev.forced = forced;

-	WriteEventsToClient (client, 1, (xEvent *) &ev);

+	WriteEventsToClient (pEv->client, 1, (xEvent *) &ev);

     }

 }

 

diff --git a/xorg-server/hw/xfree86/doc/sgml/DESIGN.sgml b/xorg-server/hw/xfree86/doc/sgml/DESIGN.sgml
index e95df7999..c6fc63edb 100644
--- a/xorg-server/hw/xfree86/doc/sgml/DESIGN.sgml
+++ b/xorg-server/hw/xfree86/doc/sgml/DESIGN.sgml
@@ -1,7414 +1,7420 @@
-<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN" [
- <!ENTITY % defs SYSTEM "X11/defs.ent"> %defs;
- <!-- config file keyword markup -->
- <!ENTITY s.key STARTTAG "bf">
- <!ENTITY e.key ENDTAG "bf">
- <!-- specific config file keywords -->
- <!ENTITY k.device "&s.key;Device&e.key;">
- <!ENTITY k.monitor "&s.key;Monitor&e.key;">
- <!ENTITY k.display "&s.key;Display&e.key;">
- <!ENTITY k.inputdevice "&s.key;InputDevice&e.key;">
- <!ENTITY k.screen "&s.key;Screen&e.key;">
- <!ENTITY k.serverlayout "&s.key;ServerLayout&e.key;">
- <!ENTITY k.driver "&s.key;Driver&e.key;">
- <!ENTITY k.module "&s.key;Module&e.key;">
- <!ENTITY k.identifier "&s.key;Identifier&e.key;">
- <!ENTITY k.serverflags "&s.key;ServerFlags&e.key;">
- <!-- command line markup -->
- <!ENTITY s.cmd STARTTAG "tt">
- <!ENTITY e.cmd ENDTAG "tt">
- <!-- inline code markup -->
- <!ENTITY s.code STARTTAG "tt">
- <!ENTITY e.code ENDTAG "tt">
- <!-- function indent -->
- <!ENTITY f.indent "&nl&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp">
-] >
-
-<article>
-
-<title>XFree86 server 4.x Design (DRAFT)
-<author>The XFree86 Project, Inc
-<and>Updates for X11R&relvers; by Jim Gettys
-<date>19 December 2003
-
-
-
-
-
-
-
-<ident>
-$XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/DESIGN.sgml,v 1.53 2003/08/23 14:10:14 dawes Exp $
-</ident>
-
-
-<p>
-<bf>NOTE</bf>: This is a DRAFT document, and the interfaces described here
-are subject to change without notice.
-
-
-<sect>Preface
-<p>
-
-The broad design principles are:
-<itemize>
-  <item>keep it reasonable
-	<itemize>
-	  <item>We cannot rewrite the complete server
-	  <item>We don't want to re-invent the wheel
-	</itemize>
-  <item>keep it modular
-	<itemize>
-	  <item>As many things as possible should go into modules
-	  <item>The basic loader binary should be minimal
-	  <item>A clean design with well defined layering is important
-	  <item>DDX specific global variables are a nono
-	  <item>The structure should be flexible enough to allow
-		future extensions
-	  <item> The structure should minimize duplication of common code
-	</itemize>
-  <item>keep important features in mind
-	<itemize>
-	  <item>multiple screens, including multiple instances of drivers
-	  <item>mixing different color depths and visuals on different
-		and ideally even on the same screen
-	  <item>better control of the PCI device used
-	  <item>better config file parser
-	  <item>get rid of all VGA compatibility assumptions
-	</itemize>
-</itemize>
-
-Unless we find major deficiencies in the DIX layer, we should avoid
-making changes there.
-
-<sect>The xorg.conf File
-<p>
-
-The xorg.conf file format is similar to the old format, with the following
-changes:
-
-<sect1>&k.device; section
-<p>
-
-    The &k.device; sections are similar to what they used to be, and
-    describe hardware-specific information for a single video card.
-    &k.device;
-    Some new keywords are added:
-
-
-    <descrip>
-      <tag>Driver "drivername"</tag>
-        Specifies the name of the driver to be used for the card.  This
-        is mandatory.
-      <tag>BusID "busslot"</tag>
-        Specifies uniquely the location of the card on the bus.  The
-        purpose is to identify particular cards in a multi-headed
-        configuration.  The format of the argument is intentionally
-        vague, and may be architecture dependent.  For a PCI bus, it
-        is something like "bus:slot:func".
-    </descrip>
-
-    A &k.device; section is considered ``active'' if there is a reference
-    to it in an active &k.screen; section.
-
-<sect1>&k.screen; section
-<p>
-
-    The &k.screen; sections are similar to what they used to be.  They
-    no longer have a &k.driver; keyword, but an &k.identifier; keyword
-    is added.  (The &k.driver; keyword may be accepted in place of the
-    &k.identifier; keyword for compatibility purposes.)  The identifier
-    can be used to identify which screen is to be active when multiple
-    &k.screen sections are present.  It is possible to specify the active
-    screen from the command line.  A default is chosen in the absence
-    of one being specified.  A &k.screen; section is considered ``active''
-    if there is a reference to it either from the command line, or from
-    an active &k.serverlayout; section.
-
-<sect1>&k.inputdevice; section
-<p>
-
-    The &k.inputdevice; section is a new section that describes
-    configuration information for input devices.  It replaces the old
-    &s.key;Keyboard&e.key;, &s.key;Pointer&e.key; and &s.key;XInput&e.key;
-    sections.  Like the &k.device; section, it has two mandatory keywords:
-    &k.identifier; and &k.driver;.  For compatibility purposes the old
-    &s.key;Keyboard&e.key; and &s.key;Pointer&e.key; sections are
-    converted by the parser into &k.inputdevice; sections as follows:
-
-    <descrip>
-      <tag>&s.key;Keyboard&e.key;</tag>
-             &k.identifier; "Implicit Core Keyboard"<newline>
-             &k.driver; "keyboard"
-      <tag>&s.key;Pointer&e.key;</tag>
-             &k.identifier; "Implicit Core Pointer"<newline>
-             &k.driver; "mouse"
-    </descrip>
-
-    An &k.inputdevice; section is considered active if there is a
-    reference to it in an active &k.serverlayout; section.  An
-    &k.inputdevice; section may also be referenced implicitly if there
-    is no &k.serverlayout; section, if the &s.cmd;-screen&e.cmd; command
-    line options is used, or if the &k.serverlayout; section doesn't
-    reference any &k.inputdevice; sections.  In this case, the first
-    sections with drivers "keyboard" and "mouse" are used as the core
-    keyboard and pointer respectively.
-
-<sect1>&k.serverlayout; section
-<p>
-
-    The &k.serverlayout; section is a new section that is used to identify
-    which &k.screen; sections are to be used in a multi-headed configuration,
-    and the relative layout of those screens.  It also identifies which
-    &k.inputdevice; sections are to be used.  Each &k.serverlayout section
-    has an identifier, a list of &k.screen; section identifiers, and a list of
-    &k.inputdevice; section identifiers.  &k.serverflags; options may also be
-    included in a &k.serverlayout; section, making it possible to override
-    the global values in the &k.serverflags; section.
-
-    A &k.serverlayout; section can be made active by being referenced on
-    the command line.  In the absence of this, a default will be chosen
-    (the first one found).  The screen names may optionally be followed
-    by a number specifying the preferred screen number, and optionally
-    by information specifying the physical positioning of the screen,
-    either in absolute terms or relative to another screen (or screens).
-    When no screen number is specified, they are numbered according to
-    the order in which they are listed.  The old (now obsolete) method
-    of providing the positioning information is to give the names of
-    the four adjacent screens.  The order of these is top, bottom, left,
-    right.  Here is an example of a &k.serverlayout; section for two
-    screens using the old method, with the second located to the right
-    of the first:
-
-    <code>
-      Section "ServerLayout"
-        Identifier "Main Layout"
-        Screen     0 "Screen 1" ""  ""  ""  "Screen 2"
-        Screen     1 "Screen 2"
-        Screen     "Screen 3"
-      EndSection
-    </code>
-
-    The preferred way of specifying the layout is to explicitly specify
-    the screen's location in absolute terms or relative to another
-    screen.
-
-    In the absolute case, the upper left corner's coordinates are given
-    after the &s.key;Absolute&e.key; keyword.  If the coordinates are
-    omitted, a value of &s.code;(0,0)&e.code; is assumed.  An example
-    of absolute positioning follows:
-
-    <code>
-      Section "ServerLayout"
-        Identifier "Main Layout"
-        Screen     0 "Screen 1" Absolute 0 0
-        Screen     1 "Screen 2" Absolute 1024 0
-        Screen     "Screen 3" Absolute 2048 0
-      EndSection
-    </code>
-
-    In the relative case, the position is specified by either using one of
-    the following keywords followed by the name of the reference screen:
-
-    <quote>
-      &s.key;RightOf&nl;
-      LeftOf&nl;
-      Above&nl;
-      Below&nl;
-      Relative&e.key;
-    </quote>
-
-    When the &s.key;Relative&e.key; keyword is used, the reference screen
-    name is followed by the coordinates of the new screen's origin
-    relative to reference screen.  The following example shows how to use
-    some of the relative positioning options.
-
-    <code>
-      Section "ServerLayout"
-        Identifier "Main Layout"
-        Screen     0 "Screen 1"
-        Screen     1 "Screen 2" RightOf "Screen 1"
-        Screen     "Screen 3" Relative "Screen 1" 2048 0
-      EndSection
-    </code>
-
-<sect1>Options
-<p>
-
-    Options are used more extensively.  They may appear in most sections
-    now.  Options related to drivers can be present in the &k.screen;,
-    &k.device; and &k.monitor; sections and the &k.display; subsections.
-    The order of precedence is &k.display;, &k.screen;, &k.monitor;,
-    &k.device;.  Options have been extended to allow an optional value
-    to be specified in addition to the option name.  For more details
-    about options, see the <ref id="options" name="Options"> section
-    for details.
-
-<sect>Driver Interface
-<p>
-
-The driver interface consists of a minimal set of entry points that are
-required based on the external events that the driver must react to.
-No non-essential structure is imposed on the way they are used beyond
-that.  This is a significant difference compared with the old design.
-
-The entry points for drawing operations are already taken care of by
-the framebuffer code (including, XAA).  Extensions and enhancements to
-framebuffer code are outside the scope of this document.
-
-This approach to the driver interface provides good flexibility, but does
-increase the complexity of drivers.  To help address this, the XFree86
-common layer provides a set of ``helper'' functions to take care of things
-that most drivers need.  These helpers help minimise the amount of code
-duplication between drivers.  The use of helper functions by drivers is
-however optional, though encouraged.  The basic philosophy behind the
-helper functions is that they should be useful to many drivers, that
-they should balance this against the complexity of their interface.  It
-is inevitable that some drivers may find some helpers unsuitable and
-need to provide their own code.
-
-Events that a driver needs to react to are:
-
-   <descrip>
-   <tag>ScreenInit</tag>
-
-     An initialisation function is called from the DIX layer for each
-     screen at the start of each server generation.
-
-   <tag>Enter VT</tag>
-
-     The server takes control of the console.
-
-   <tag>Leave VT</tag>
-
-     The server releases control of the console.
-
-   <tag>Mode Switch</tag>
-
-     Change video mode.
-
-   <tag>ViewPort change</tag>
-
-     Change the origin of the physical view port.
-
-   <tag>ScreenSaver state change</tag>
-
-     Screen saver activation/deactivation.
-
-   <tag>CloseScreen</tag>
-
-     A close screen function is called from the DIX layer for each screen
-     at the end of each server generation.
-   </descrip>
-
-
-In addition to these events, the following functions are required by
-the XFree86 common layer:
-
-   <descrip>
-   <tag>Identify</tag>
-
-     Print a driver identifying message.
-
-   <tag>Probe</tag>
-
-     This is how a driver identifies if there is any hardware present that
-     it knows how to drive.
-
-   <tag>PreInit</tag>
-
-     Process information from the xorg.conf file, determine the
-     full characteristics of the hardware, and determine if a valid
-     configuration is present.
-   </descrip>
-
-The VidMode extension also requires:
-
-   <descrip>
-   <tag>ValidMode</tag>
-
-     Identify if a new mode is usable with the current configuration.
-     The PreInit function (and/or helpers it calls) may also make use
-     of the ValidMode function or something similar.
-   </descrip>
-
-
-Other extensions may require other entry points.  The drivers will
-inform the common layer of these in such cases.
-
-<sect>Resource Access Control Introduction
-<p>
-
-Graphics devices are accessed through ranges in I/O or memory space.
-While most modern graphics devices allow relocation of such ranges many
-of them still require the use of well established interfaces such as
-VGA memory and IO ranges or 8514/A IO ranges.  With modern buses (like
-PCI) it is possible for multiple video devices to share access to these
-resources.  The RAC (Resource Access Control) subsystem provides a
-mechanism for this.
-
-<sect1>Terms and Definitions
-<p>
-
-<sect2>Bus
-<p>
-
-    ``Bus'' is ambiguous as it is used for different things: it may refer
-    to physical incompatible extension connectors in a computer system.
-    The RAC system knows two such systems: The ISA bus and the PCI bus.
-    (On the software level EISA, MCA and VL buses are currently treated
-    like ISA buses).  ``Bus'' may also refer to logically different
-    entities on a single bus system which are connected via bridges.  A
-    PCI system may have several distinct PCI buses connecting each other
-    by PCI-PCI bridges or to the host CPU by HOST-PCI bridges.
-
-    Systems that host more than one bus system link these together using
-    bridges.  Bridges are a concern to RAC as they might block or pass
-    specific resources.  PCI-PCI bridges may be set up to pass VGA
-    resources to the secondary bus.  PCI-ISA buses pass any resources not
-    decoded on the primary PCI bus to the ISA bus.  This way VGA resources
-    (although exclusive on the ISA bus) can be shared by ISA and PCI
-    cards.  Currently HOST-PCI bridges are not yet handled by RAC as they
-    require specific drivers.
-
-<sect2>Entity
-<p>
-
-    The smallest independently addressable unit on a system bus is
-    referred to as an entity.  So far we know ISA and PCI entities.  PCI
-    entities can be located on the PCI bus by an unique ID consisting of
-    the bus, card and function number.
-
-<sect2>Resource
-<p>
-
-    ``Resource'' refers to a range of memory or I/O addresses an entity
-    can decode.
-
-    If a device is capable of disabling this decoding the resource is
-    called sharable.  For PCI devices a generic method is provided to
-    control resource decoding.  Other devices will have to provide a
-    device specific function to control decoding.
-
-    If the entity is capable of decoding this range at a different
-    location this resource is considered relocatable.
-
-    Resources which start at a specific address and occupy a single
-    continuous range are called block resources.
-
-    Alternatively resource addresses can be decoded in a way that they
-    satisfy the conditions:
-    <quote><verb>
-                    address & mask == base
-    </verb></quote>
-    and
-    <quote><verb>
-                       base & mask == base
-    </verb></quote>
-    Resources addressed in such a way are called sparse resources.
-
-<sect2>Server States
-<p>
-
-    The resource access control system knows two server states: the
-    SETUP and the OPERATING state.  The SETUP state is entered whenever
-    a mode change takes place or the server exits or does VT switching.
-    During this state all entity resources are under resource access
-    control.  During OPERATING state only those entities are controlled
-    which actually have shared resources that conflict with others.
-
-<sect>Control Flow in the Server and Mandatory Driver Functions
-<p>
-
-At the start of each server generation, &s.code;main()&e.code;
-(&s.code;dix/main.c&e.code;) calls the DDX function
-&s.code;InitOutput()&e.code;.  This is the first place that the DDX gets
-control.  &s.code;InitOutput()&e.code; is expected to fill in the global
-&s.code;screenInfo&e.code; struct, and one
-&s.code;screenInfo.screen[]&e.code; entry for each screen present.  Here
-is what &s.code;InitOutput()&e.code; does:
-
-<sect1>Parse the xorg.conf file
-<p>
-
-    This is done at the start of the first server generation only.
-
-    The xorg.conf file is read in full, and the resulting information
-    stored in data structures.  None of the parsed information is
-    processed at this point.  The parser data structures are opaque to
-    the video drivers and to most of the common layer code.
-
-    The entire file is parsed first to remove any section ordering
-    requirements.
-
-
-<sect1>Initial processing of parsed information and command line options
-<p>
-
-    This is done at the start of the first server generation only.
-
-    The initial processing is to determine paths like the
-    &s.key;ModulePath&e.key;, etc, and to determine which &k.serverlayout;,
-    &k.screen; and &k.device; sections are active.
-
-
-<sect1>Enable port I/O access
-<p>
-
-    Port I/O access is controlled from the XFree86 common layer, and is
-    ``all or nothing''.  It is enabled prior to calling driver probes, at
-    the start of subsequent server generations, and when VT switching
-    back to the Xserver.  It is disabled at the end of server generations,
-    and when VT switching away from the Xserver.
-
-    The implementation details of this may vary on different platforms.
-
-
-<sect1>General bus probe
-<p>
-
-    This is done at the start of the first server generation only.
-
-    In the case of ix86 machines, this will be a general PCI probe.
-    The full information obtained here will be available to the drivers.
-    This information persists for the life of the Xserver.  In the PCI
-    case, the PCI information for all video cards found is available by
-    calling &s.code;xf86GetPciVideoInfo()&e.code;.
-
-    <quote>
-    &s.code;pciVideoPtr *xf86GetPciVideoInfo(void)&e.code;
-    <quote><p>
-	returns a pointer to a list of pointers to
-	&s.code;pciVideoRec&e.code; entries, of which there is one for
-	each detected PCI video card.  The list is terminated with a
-	&s.code;NULL&e.code; pointer.  If no PCI video cards were
-	detected, the return value is &s.code;NULL&e.code;.
-
-    </quote>
-    </quote>
-
-    After the bus probe, the resource broker is initialised.
-
-
-<sect1>Load initial set of modules
-<p>
-
-    This is done at the start of the first server generation only.
-
-    The core server contains a list of mandatory modules.  These are loaded
-    first.  Currently the only module on this list is the bitmap font module.
-
-    The next set of modules loaded are those specified explicitly in the
-    &k.module; section of the config file.
-
-    The final set of initial modules are the driver modules referenced
-    by the active &k.device; and &k.inputdevice; sections in the config
-    file.  Each of these modules is loaded exactly once.
-
-
-<sect1>Register Video and Input Drivers
-<p>
-
-    This is done at the start of the first server generation only.
-
-    When a driver module is loaded, the loader calls its
-    &s.code;Setup&e.code; function.  For video drivers, this function
-    calls &s.code;xf86AddDriver()&e.code; to register the driver's
-    &s.code;DriverRec&e.code;, which contains a small set of essential
-    details and driver entry points required during the early phase of
-    &s.code;InitOutput()&e.code;.  &s.code;xf86AddDriver()&e.code; adds
-    it to the global &s.code;xf86DriverList[]&e.code; array.
-
-    The &s.code;DriverRec&e.code; contains the driver canonical name,
-    the &s.code;Identify()&e.code;,
-    &s.code;Probe()&e.code; and &s.code;AvailableOptions()&e.code;
-    function entry points as well as a pointer
-    to the driver's module (as returned from the loader when the driver
-    was loaded) and a reference count which keeps track of how many
-    screens are using the driver.  The entry driver entry points are
-    those required prior to the driver allocating and filling in its
-    &s.code;ScrnInfoRec&e.code;.
-
-    For a static server, the &s.code;xf86DriverList[]&e.code; array is
-    initialised at build time, and the loading of modules is not done.
-
-    A similar procedure is used for input drivers.  The input driver's
-    &s.code;Setup&e.code; function calls
-    &s.code;xf86AddInputDriver()&e.code; to register the driver's
-    &s.code;InputDriverRec&e.code;, which contains a small set of
-    essential details and driver entry points required during the early
-    phase of &s.code;InitInput()&e.code;.
-    &s.code;xf86AddInputDriver()&e.code; adds it to the global
-    &s.code;xf86InputDriverList[]&e.code; array.  For a static server,
-    the &s.code;xf86InputDriverList[]&e.code; array is initialised at
-    build time.
-
-    Both the &s.code;xf86DriverList[]&e.code; and
-    &s.code;xf86InputDriverList[]&e.code; arrays have been initialised
-    by the end of this stage.
-
-    Once all the drivers are registered, their
-    &s.code;ChipIdentify()&e.code; functions are called.
-
-    <quote>
-    &s.code;void ChipIdentify(int flags)&e.code;
-    <quote>
-      This is expected to print a message indicating the driver name,
-      a short summary of what it supports, and a list of the chipset
-      names that it supports.  It may use the xf86PrintChipsets() helper
-      to do this.
-    </quote>
-    </quote>
-
-    <quote>
-    &s.code;void xf86PrintChipsets(const char *drvname, const char *drvmsg,
-                     &f.indent;SymTabPtr chips)&e.code;
-    <quote>
-      This function provides an easy way for a driver's ChipIdentify
-      function to format the identification message.
-    </quote>
-    </quote>
-
-<sect1>Initialise Access Control
-<p>
-
-    This is done at the start of the first server generation only.
-
-    The Resource Access Control (RAC) subsystem is initialised before
-    calling any driver functions that may access hardware.  All generic
-    bus information is probed and saved (for restoration later).  All
-    (shared resource) video devices are disabled at the generic bus
-    level, and a probe is done to find the ``primary'' video device.  These
-    devices remain disabled for the next step.
-
-
-<sect1>Video Driver Probe<label id="probe">
-<p>
-    This is done at the start of the first server generation only.  The
-    &s.code;ChipProbe()&e.code; function of each registered video driver
-    is called.
-
-    <quote><p>
-    &s.code;Bool ChipProbe(DriverPtr drv, int flags)&e.code;
-    <quote><p>
-      The purpose of this is to identify all instances of hardware
-      supported by the driver.  The flags value is currently either 0,
-      &s.code;PROBE_DEFAULT&e.code; or &s.code;PROBE_DETECT&e.code;.
-      &s.code;PROBE_DETECT&e.code; is used if "-configure" or "-probe"
-      command line arguments are given and indicates to the
-      &s.code;Probe()&e.code; function that it should not configure the
-      bus entities and that no xorg.conf information is available.
-
-      The probe must find the active device sections that match the
-      driver by calling &s.code;xf86MatchDevice()&e.code;.  The number
-      of matches found limits the maximum number of instances for this
-      driver.  If no matches are found, the function should return
-      &s.code;FALSE&e.code; immediately.
-
-      Devices that cannot be identified by using device-independent
-      methods should be probed at this stage (keeping in mind that access
-      to all resources that can be disabled in a device-independent way
-      are disabled during this phase).  The probe must be a minimal
-      probe.  It should just determine if there is a card present that
-      the driver can drive.  It should use the least intrusive probe
-      methods possible.  It must not do anything that is not essential,
-      like probing for other details such as the amount of memory
-      installed, etc.  It is recommended that the
-      &s.code;xf86MatchPciInstances()&e.code; helper function be used
-      for identifying matching PCI devices, and similarly the
-      &s.code;xf86MatchIsaInstances()&e.code; for ISA (non-PCI) devices
-      (see the <ref id="rac" name="RAC"> section).  These helpers also
-      checks and claims the appropriate entity.  When not using the
-      helper, that should be done with &s.code;xf86CheckPciSlot()&e.code;
-      and &s.code;xf86ClaimPciSlot()&e.code; for PCI devices and
-      &s.code;xf86ClaimIsaSlot()&e.code; for ISA devices (see the
-      <ref id="rac" name="RAC"> section).
-
-      The probe must register all non-relocatable resources at this
-      stage.  If a resource conflict is found between exclusive resources
-      the driver will fail immediately.  This is usually best done with
-      the &s.code;xf86ConfigPciEntity()&e.code; helper function
-      for PCI and &s.code;xf86ConfigIsaEntity()&e.code; for ISA
-      (see the <ref id="rac" name="RAC"> section).  It is possible to
-      register some entity specific functions with those helpers.  When
-      not using the helpers, the &s.code;xf86AddEntityToScreen()&e.code;
-      &s.code;xf86ClaimFixedResources()&e.code; and
-      &s.code;xf86SetEntityFuncs()&e.code; should be used instead (see
-      the <ref id="rac" name="RAC"> section).
-
-      If a chipset is specified in an active device section which the
-      driver considers relevant (ie it has no driver specified, or the
-      driver specified matches the driver doing the probe), the Probe
-      must return &s.code;FALSE&e.code; if the chipset doesn't match
-      one supported by the driver.
-
-      If there are no active device sections that the driver considers
-      relevant, it must return &s.code;FALSE&e.code;.
-
-      Allocate a &s.code;ScrnInfoRec&e.code; for each active instance of the
-      hardware found, and fill in the basic information, including the
-      other driver entry points.   This is best done with the
-      &s.code;xf86ConfigIsaEntity()&e.code; helper function for ISA
-      instances or &s.code;xf86ConfigPciEntity()&e.code; for PCI instances.
-      These functions allocate a &s.code;ScrnInfoRec&e.code; for active
-      entities. Optionally &s.code;xf86AllocateScreen()&e.code;
-      function may also be used to allocate the &s.code;ScrnInfoRec&e.code;.
-      Any of these functions take care of initialising fields to defined
-      ``unused'' values.
-
-      Claim the entities for each instance of the hardware found.  This
-      prevents other drivers from claiming the same hardware.
-
-      Must leave hardware in the same state it found it in, and must not
-      do any hardware initialisation.
-
-      All detection can be overridden via the config file, and that
-      parsed information is available to the driver at this stage.
-
-      Returns &s.code;TRUE&e.code; if one or more instances are found,
-      and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;int xf86MatchDevice(const char *drivername,
-		&f.indent;GDevPtr **driversectlist)&e.code;
-    <quote><p>
-
-      This function takes the name of the driver and returns via
-      &s.code;driversectlist&e.code; a list of device sections that
-      match the driver name.  The function return value is the number
-      of matches found.  If a fatal error is encountered the return
-      value is &s.code;-1&e.code;.
-
-      The caller should use &s.code;xfree()&e.code; to free
-      &s.code;*driversectlist&e.code; when it is no longer needed.
-
-    </quote>
-
-    &s.code;ScrnInfoPtr xf86AllocateScreen(DriverPtr drv, int flags)&e.code;
-    <quote><p>
-      This function allocates a new &s.code;ScrnInfoRec&e.code; in the
-      &s.code;xf86Screens[]&e.code; array.  This function is normally
-      called by the video driver &s.code;ChipProbe()&e.code; functions.
-      The return value is a pointer to the newly allocated
-      &s.code;ScrnInfoRec&e.code;.  The &s.code;scrnIndex&e.code;,
-      &s.code;origIndex&e.code;, &s.code;module&e.code; and
-      &s.code;drv&e.code; fields are initialised.  The reference count
-      in &s.code;drv&e.code; is incremented.  The storage for any
-      currently allocated ``privates'' pointers is also allocated and
-      the &s.code;privates&e.code; field initialised (the privates data
-      is of course not allocated or initialised).  This function never
-      returns on failure.  If the allocation fails, the server exits
-      with a fatal error.  The flags value is not currently used, and
-      should be set to zero.
-    </quote>
-    </quote>
-
-    At the completion of this, a list of &s.code;ScrnInfoRecs&e.code;
-    have been allocated in the &s.code;xf86Screens[]&e.code; array, and
-    the associated entities and fixed resources have been claimed.  The
-    following &s.code;ScrnInfoRec&e.code; fields must be initialised at
-    this point:
-
-    <quote><verb>
-          driverVersion
-          driverName
-          scrnIndex(*)
-          origIndex(*)
-          drv(*)
-          module(*)
-          name
-          Probe
-          PreInit
-          ScreenInit
-          EnterVT
-          LeaveVT
-          numEntities
-          entityList
-          access
-    </verb></quote>
-
-    <tt>(*)</tt> These are initialised when the &s.code;ScrnInfoRec&e.code;
-    is allocated, and not explicitly by the driver.
-
-    The following &s.code;ScrnInfoRec&e.code; fields must be initialised
-    if the driver is going to use them:
-
-    <quote><verb>
-          SwitchMode
-          AdjustFrame
-          FreeScreen
-          ValidMode
-    </verb></quote>
-
-<sect1>Matching Screens
-<p>
-
-    This is done at the start of the first server generation only.
-
-    After the Probe phase is finished, there will be some number of
-    &s.code;ScrnInfoRecs&e.code;.  These are then matched with the active
-    &k.screen; sections in the xorg.conf, and those not having an active
-    &k.screen; section are deleted.  If the number of remaining screens
-    is 0, &s.code;InitOutput()&e.code; sets
-    &s.code;screenInfo.numScreens&e.code; to &s.code;0&e.code; and
-    returns.
-
-    At this point the following fields of the &s.code;ScrnInfoRecs&e.code;
-    must be initialised:
-
-    <quote><verb>
-          confScreen
-    </verb></quote>
-
-
-<sect1>Allocate non-conflicting resources
-<p>
-
-    This is done at the start of the first server generation only.
-
-    Before calling the drivers again, the resource information collected
-    from the Probe phase is processed.  This includes checking the extent
-    of PCI resources for the probed devices, and resolving any conflicts
-    in the relocatable PCI resources.  It also reports conflicts, checks
-    bus routing issues, and anything else that is needed to enable the
-    entities for the next phase.
-
-    If any drivers registered an &s.code;EntityInit()&e.code; function
-    during the Probe phase, then they are called here.
-
-
-<sect1>Sort the Screens and pre-check Monitor Information
-<p>
-
-    This is done at the start of the first server generation only.
-
-    The list of screens is sorted to match the ordering requested in the
-    config file.
-
-    The list of modes for each active monitor is checked against the
-    monitor's parameters.  Invalid modes are pruned.
-
-
-<sect1>PreInit
-<p>
-
-    This is done at the start of the first server generation only.
-
-    For each &s.code;ScrnInfoRec&e.code;, enable access to the screens entities and call
-    the &s.code;ChipPreInit()&e.code; function.
-
-    <quote><p>
-    &s.code;Bool ChipPreInit(ScrnInfoRec screen, int flags)&e.code;
-    <quote><p>
-      The purpose of this function is to find out all the information
-      required to determine if the configuration is usable, and to
-      initialise those parts of the &s.code;ScrnInfoRec&e.code; that
-      can be set once at the beginning of the first server generation.
-
-      The number of entities registered for the screen should be checked
-      against the expected number (most drivers expect only one).  The
-      entity information for each of them should be retrieved (with
-      &s.code;xf86GetEntityInfo()&e.code;) and checked for the correct
-      bus type and that none of the sharable resources registered during
-      the Probe phase was rejected.
-
-      Access to resources for the entities that can be controlled in a
-      device-independent way are enabled before this function is called.
-      If the driver needs to access any resources that it has disabled
-      in an &s.code;EntityInit()&e.code; function that it registered,
-      then it may enable them here providing that it disables them before
-      this function returns.
-
-      This includes probing for video memory, clocks, ramdac, and all
-      other HW info that is needed.  It includes determining the
-      depth/bpp/visual and related info.  It includes validating and
-      determining the set of video modes that will be used (and anything
-      that is required to determine that).
-
-      This information should be determined in the least intrusive way
-      possible.  The state of the HW must remain unchanged by this
-      function.  Although video memory (including MMIO) may be mapped
-      within this function, it must be unmapped before returning.  Driver
-      specific information should be stored in a structure hooked into
-      the &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code;
-      field.  Any other modules which require persistent data (ie data
-      that persists across server generations) should be initialised in
-      this function, and they should allocate a ``privates'' index to
-      hook their data into by calling
-      &s.code;xf86AllocateScrnInfoPrivateIndex().&e.code;  The ``privates''
-      data is persistent.
-
-      Helper functions for some of these things are provided at the
-      XFree86 common level, and the driver can choose to make use of
-      them.
-
-      All additional resources that the screen needs must be registered
-      here.  This should be done with
-      &s.code;xf86RegisterResources()&e.code;.  If some of the fixed
-      resources registered in the Probe phase are not needed or not
-      decoded by the hardware when in the OPERATING server state, their
-      status should be updated with
-      &s.code;xf86SetOperatingState()&e.code;.
-
-      Modules may be loaded at any point in this function, and all
-      modules that the driver will need must be loaded before the end
-      of this function.  Either the  &s.code;xf86LoadSubModule()&e.code;
-      or the &s.code;xf86LoadDrvSubModule()&e.code; function should be
-      used to load modules depending on whether a
-      &s.code;ScrnInfoRec&e.code; has been set up. A driver may unload
-      a module within this function if it was only needed temporarily,
-      and the &s.code;xf86UnloadSubModule()&e.code; function should be used
-      to do that.  Otherwise there is no need to explicitly unload modules
-      because the loader takes care of module dependencies and will
-      unload submodules automatically if/when the driver module is
-      unloaded.
-
-      The bulk of the &s.code;ScrnInfoRec&e.code; fields should be filled
-      out in this function.
-
-      &s.code;ChipPreInit()&e.code; returns &s.code;FALSE&e.code; when
-      the configuration is unusable in some way (unsupported depth, no
-      valid modes, not enough video memory, etc), and &s.code;TRUE&e.code;
-      if it is usable.
-
-      It is expected that if the &s.code;ChipPreInit()&e.code; function
-      returns &s.code;TRUE&e.code;, then the only reasons that subsequent
-      stages in the driver might fail are lack or resources (like xalloc
-      failures).  All other possible reasons for failure should be
-      determined by the &s.code;ChipPreInit()&e.code; function.
-
-    </quote>
-    </quote>
-
-    The &s.code;ScrnInfoRecs&e.code; for screens where the &s.code;ChipPreInit()&e.code; fails are removed.
-    If none remain, &s.code;InitOutput()&e.code; sets &s.code;screenInfo.numScreens&e.code; to &s.code;0&e.code; and returns.
-
-    At this point, further fields of the &s.code;ScrnInfoRecs&e.code; would normally be
-    filled in.  Most are not strictly mandatory, but many are required
-    by other layers and/or helper functions that the driver may choose
-    to use.  The documentation for those layers and helper functions
-    indicates which they require.
-
-    The following fields of the &s.code;ScrnInfoRecs&e.code; should be filled in if the
-    driver is going to use them:
-
-    <quote><verb>
-          monitor
-          display
-          depth
-          pixmapBPP
-          bitsPerPixel
-          weight                (>8bpp only)
-          mask                  (>8bpp only)
-          offset                (>8bpp only)
-          rgbBits               (8bpp only)
-          gamma
-          defaultVisual
-          maxHValue
-          maxVValue
-          virtualX
-          virtualY
-          displayWidth
-          frameX0
-          frameY0
-          frameX1
-          frameY1
-          zoomLocked
-          modePool
-          modes
-          currentMode
-          progClock             (TRUE if clock is programmable)
-          chipset
-          ramdac
-          clockchip
-          numClocks             (if not programmable)
-          clock[]               (if not programmable)
-          videoRam
-          biosBase
-          memBase
-          memClk
-          driverPrivate
-          chipID
-          chipRev
-    </verb></quote>
-
-    <quote><p>
-    &s.code;pointer xf86LoadSubModule(ScrnInfoPtr pScrn, const char *name)&e.code:
-      and
-    &s.code;pointer xf86LoadDrvSubModule(DriverPtr drv, const char *name)&e.code:
-    <quote><p>
-      Load a module that a driver depends on.  This function loads the
-      module &s.code;name&e.code; as a sub module of the driver.  The
-      return value is a handle identifying the new module.  If the load
-      fails, the return value will be &s.code;NULL&e.code;.  If a driver
-      needs to explicitly unload a module it has loaded in this way,
-      the return value must be saved and passed to
-      &s.code;xf86UnloadSubModule()&e.code; when unloading.
-
-    </quote>
-
-    &s.code;void xf86UnloadSubModule(pointer module)&e.code;
-    <quote><p>
-      Unloads the module referenced by &s.code;module&e.code;.
-      &s.code;module&e.code; should be a pointer returned previously
-      by &s.code;xf86LoadSubModule()&e.code; or
-      &s.code;xf86LoadDrvSubModule()&e.code; .
-
-    </quote>
-    </quote>
-
-<sect1>Cleaning up Unused Drivers
-<p>
-
-    At this point it is known which screens will be in use, and which
-    drivers are being used.  Unreferenced drivers (and modules they
-    may have loaded) are unloaded here.
-
-
-<sect1>Consistency Checks
-<p>
-
-    The parameters that must be global to the server, like pixmap formats,
-    bitmap bit order, bitmap scanline unit and image byte order are
-    compared for each of the screens.  If a mismatch is found, the server
-    exits with an appropriate message.
-
-
-<sect1>Check if Resource Control is Needed
-<p>
-
-    Determine if resource access control is needed.  This is the case
-    if more than one screen is used.  If necessary the RAC wrapper module
-    is loaded.
-
-<sect1>AddScreen (ScreenInit)
-<p>
-
-    At this point, the valid screens are known.
-    &s.code;AddScreen()&e.code; is called for each of them, passing
-    &s.code;ChipScreenInit()&e.code; as the argument.
-    &s.code;AddScreen()&e.code; is a DIX function that allocates a new
-    &s.code;screenInfo.screen[]&e.code; entry (aka
-    &s.code;pScreen&e.code;), and does some basic initialisation of it.
-    It then calls the &s.code;ChipScreenInit()&e.code; function, with
-    &s.code;pScreen&e.code; as one of its arguments.  If
-    &s.code;ChipScreenInit()&e.code; returns &s.code;FALSE&e.code;,
-    &s.code;AddScreen()&e.code; returns &s.code;-1&e.code;.  Otherwise
-    it returns the index of the screen.  &s.code;AddScreen()&e.code;
-    should only fail because of programming errors or failure to allocate
-    resources (like memory).  All configuration problems should be
-    detected BEFORE this point.
-
-    <quote><p>
-    &s.code;Bool ChipScreenInit(int index, ScreenPtr pScreen,
-	&f.indent;int argc, char **argv)&e.code;
-    <quote><p>
-      This is called at the start of each server generation.
-
-      Fill in all of &s.code;pScreen&e.code;, possibly doing some of
-      this by calling ScreenInit functions from other layers like mi,
-      framebuffers (cfb, etc), and extensions.
-
-      Decide which operations need to be placed under resource access
-      control.  The classes of operations are the frame buffer operations
-      (&s.code;RAC_FB&e.code;), the pointer operations
-      (&s.code;RAC_CURSOR&e.code;), the viewport change operations
-      (&s.code;RAC_VIEWPORT&e.code;) and the colormap operations
-      (&s.code;RAC_COLORMAP&e.code;).  Any operation that requires
-      resources which might be disabled during OPERATING state should
-      be set to use RAC.  This can be specified separately for memory
-      and IO resources (the &s.code;racMemFlags&e.code; and
-      &s.code;racIoFlags&e.code; fields of the &s.code;ScrnInfoRec&e.code;
-      respectively).
-
-      Map any video memory or other memory regions.
-
-      Save the video card state.  Enough state must be saved so that
-      the original state can later be restored.
-
-      Initialise the initial video mode.  The &s.code;ScrnInfoRec&e.code;'s
-      &s.code;vtSema&e.code; field should be set to &s.code;TRUE&e.code;
-      just prior to changing the video hardware's state.
-
-    </quote>
-    </quote>
-
-
-    The &s.code;ChipScreenInit()&e.code; function (or functions from other
-    layers that it calls) should allocate entries in the
-    &s.code;ScreenRec&e.code;'s &s.code;devPrivates&e.code; area by
-    calling &s.code;AllocateScreenPrivateIndex()&e.code; if it needs
-    per-generation storage.  Since the &s.code;ScreenRec&e.code;'s
-    &s.code;devPrivates&e.code; information is cleared for each server
-    generation, this is the correct place to initialise it.
-
-    After &s.code;AddScreen()&e.code; has successfully returned, the
-    following &s.code;ScrnInfoRec&e.code; fields are initialised:
-
-    <quote><verb>
-          pScreen
-          racMemFlags
-          racIoFlags
-    </verb></quote>
-
-    The &s.code;ChipScreenInit()&e.code; function should initialise the
-    &s.code;CloseScreen&e.code; and &s.code;SaveScreen&e.code; fields
-    of &s.code;pScreen&e.code;.  The old value of
-    &s.code;pScreen-&gt;CloseScreen&e.code; should be saved as part of
-    the driver's per-screen private data, allowing it to be called from
-    &s.code;ChipCloseScreen()&e.code;.  This means that the existing
-    &s.code;CloseScreen()&e.code; function is wrapped.
-
-<sect1>Finalising RAC Initialisation
-<p>
-
-    After all the &s.code;ChipScreenInit()&e.code; functions have been
-    called, each screen has registered its RAC requirements.  This
-    information is used to determine which shared resources are requested
-    by more than one driver and set the access functions accordingly.
-    This is done following these rules:
-
-    <enum>
-     <item>The sharable resources registered by each entity are compared.
-	If a resource is registered by more than one entity the entity
-	will be marked to indicate that it needs to share this resources
-	type (IO or MEM).
-
-     <item>A resource marked ``disabled'' during OPERATING state will be
-        ignored entirely.
-
-     <item>A resource marked ``unused'' will only conflict with an overlapping
-	resource of an other entity if the second is actually in use
-	during OPERATING state.
-
-     <item>If an ``unused'' resource was found to conflict but the entity
-	does not use any other resource of this type the entire resource
-	type will be disabled for that entity.
-    </enum>
-
-
-<sect1>Finishing InitOutput()
-<p>
-
-    At this point &s.code;InitOutput()&e.code; is finished, and all the
-    screens have been setup in their initial video mode.
-
-
-<sect1>Mode Switching
-<p>
-
-    When a SwitchMode event is received, &s.code;ChipSwitchMode()&e.code;
-    is called (when it exists):
-
-    <quote><p>
-    &s.code;Bool ChipSwitchMode(int index, DisplayModePtr mode, int flags)&e.code;
-    <quote><p>
-      Initialises the new mode for the screen identified by
-      &s.code;index;&e.code;.  The viewport may need to be adjusted
-      also.
-
-    </quote>
-    </quote>
-
-
-<sect1>Changing Viewport
-<p>
-
-    When a Change Viewport event is received,
-    &s.code;ChipAdjustFrame()&e.code; is called (when it exists):
-
-    <quote><p>
-    &s.code;void ChipAdjustFrame(int index, int x, int y, int flags)&e.code;
-    <quote><p>
-      Changes the viewport for the screen identified by
-      &s.code;index;&e.code;.
-
-      It should be noted that many chipsets impose restrictions on where the
-      viewport may be placed in the virtual resolution, either for alignment
-      reasons, or to prevent the start of the viewport from being positioned
-      within a pixel (as can happen in a 24bpp mode).  After calculating the
-      value the chipset's panning registers need to be set to for non-DGA
-      modes, this function should recalculate the ScrnInfoRec's
-      &s.code;frameX0&e.code;, &s.code;frameY0&e.code, &s.code;frameX1&e.code;
-      and &s.code;frameY1&e.code; fields to correspond to that value.  If
-      this is not done, switching to another mode might cause the position
-      of a hardware cursor to change.
-
-    </quote>
-    </quote>
-
-
-<sect1>VT Switching
-<p>
-
-    When a VT switch event is received, &s.code;xf86VTSwitch()&e.code;
-    is called.  &s.code;xf86VTSwitch()&e.code; does the following:
-
-    <descrip>
-    <tag>On ENTER:</tag>
-    <itemize>
-      <item>enable port I/O access
-
-      <item>save and initialise the bus/resource state
-
-      <item>enter the SETUP server state
-
-      <item>calls &s.code;ChipEnterVT()&e.code; for each screen
-
-      <item>enter the OPERATING server state
-
-      <item>validate GCs
-
-      <item>Restore fb from saved pixmap for each screen
-
-      <item>Enable all input devices
-    </itemize>
-    <tag>On LEAVE:</tag>
-    <itemize>
-      <item>Save fb to pixmap for each screen
-
-      <item>validate GCs
-
-      <item>enter the SETUP server state
-
-      <item>calls &s.code;ChipLeaveVT()&e.code; for each screen
-
-      <item>disable all input devices
-
-      <item>restore bus/resource state
-
-      <item>disables port I/O access
-    </itemize>
-    </descrip>
-
-    <quote><p>
-    &s.code;Bool ChipEnterVT(int index, int flags)&e.code;
-    <quote><p>
-      This function should initialise the current video mode and
-      initialise the viewport, turn on the HW cursor if appropriate,
-      etc.
-
-      Should it re-save the video state before initialising the video
-      mode?
-
-    </quote>
-
-    &s.code;void ChipLeaveVT(int index, int flags)&e.code;
-    <quote><p>
-      This function should restore the saved video state.  If
-      appropriate it should also turn off the HW cursor, and invalidate
-      any pixmap/font caches.
-
-    </quote>
-
-    Optionally, &s.code;ChipLeaveVT()&e.code; may also unmap memory
-    regions.  If so, &s.code;ChipEnterVT()&e.code; will need to remap
-    them.  Additionally, if an aperture used to access video memory is
-    unmapped and remapped in this fashion, &s.code;ChipEnterVT()&e.code;
-    will also need to notify the framebuffer layers of the aperture's new
-    location in virtual memory.  This is done with a call to the screen's
-    &s.code;ModifyPixmapHeader()&e.code; function, as follows
-
-    <quote><p>
-    &s.code;(*pScreen->ModifyPixmapHeader)(pScrn->ppix,
-        &f.indent;-1, -1, -1, -1, -1, <it>NewApertureAddress</it>);&e.code;
-    <quote><p>
-        where the &s.code``ppix''&e.code; field in a ScrnInfoRec
-        points to the pixmap used by the screen's
-        &s.code;SaveRestoreImage()&e.code; function to hold the screen's
-        contents while switched out.
-
-    </quote>
-    </quote>
-
-    Currently, aperture remapping, as described here, should not be
-    attempted if the driver uses the &s.code;xf8_16bpp&e.code; or
-    &s.code;xf8_32bpp&e.code; framebuffer layers.  A pending
-    restructuring of VT switching will address this restriction in
-    the near future.
-
-    </quote>
-
-    Other layers may wrap the &s.code;ChipEnterVT()&e.code; and
-    &s.code;ChipLeaveVT()&e.code; functions if they need to take some
-    action when these events are received.
-
-<sect1>End of server generation
-<p>
-
-    At the end of each server generation, the DIX layer calls
-    &s.code;ChipCloseScreen()&e.code; for each screen:
-
-    <quote><p>
-    &s.code;Bool ChipCloseScreen(int index, ScreenPtr pScreen)&e.code;
-    <quote><p>
-      This function should restore the saved video state and unmap the
-      memory regions.
-
-      It should also free per-screen data structures allocated by the
-      driver.  Note that the persistent data held in the
-      &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field
-      should not be freed here because it is needed by subsequent server
-      generations.
-
-      The &s.code;ScrnInfoRec&e.code;'s &s.code;vtSema&e.code; field
-      should be set to &s.code;FALSE&e.code; once the video HW state
-      has been restored.
-
-      Before freeing the per-screen driver data the saved
-      &s.code;CloseScreen&e.code; value should be restored to
-      &s.code;pScreen-&gt;CloseScreen&e.code;, and that function should
-      be called after freeing the data.
-
-    </quote>
-    </quote>
-
-<sect>Optional Driver Functions
-<p>
-
-The functions outlined here can be called from the XFree86 common layer,
-but their presence is optional.
-
-<sect1>Mode Validation
-<p>
-
-    When a mode validation helper supplied by the XFree86-common layer is
-    being used, it can be useful to provide a function to check for hw
-    specific mode constraints:
-
-    <quote><p>
-    &s.code;ModeStatus ChipValidMode(int index, DisplayModePtr mode,
-                   &f.indent;Bool verbose, int flags)&e.code;
-    <quote><p>
-      Check the passed mode for hw-specific constraints, and return the
-      appropriate status value.
-
-    </quote>
-    </quote>
-
-<p>
-This function may also modify the effective timings and clock of the passed
-mode.  These have been stored in the mode's &s.code;Crtc*&e.code; and
-&s.code;SynthClock&e.code; elements, and have already been adjusted for
-interlacing, doublescanning, multiscanning and clock multipliers and dividers.
-The function should not modify any other mode field, unless it wants to modify
-the mode timings reported to the user by &s.code;xf86PrintModes()&e.code;.
-
-<p>
-The function is called once for every mode in the xorg.conf Monitor section
-assigned to the screen, with &s.code;flags&e.code; set to
-&s.code;MODECHECK_INITIAL&e.code;.  It is subsequently called for every mode
-in the xorg.conf Display subsection assigned to the screen, with
-&s.code;flags&e.code; set to &s.code;MODECHECK_FINAL&e.code;.  In the second
-case, the mode will have successfully passed all other tests.  In addition,
-the &s.code;ScrnInfoRec&e.code;'s &s.code;virtualX&e.code;,
-&s.code;virtualY&e.code; and &s.code;displayWidth&e.code; fields will have been
-set as if the mode to be validated were to be the last mode accepted.
-
-<p>
-In effect, calls with MODECHECK_INITIAL are intended for checks that do not
-depend on any mode other than the one being validated, while calls with
-MODECHECK_FINAL are intended for checks that may involve more than one mode.
-
-<sect1>Free screen data
-<p>
-
-    When a screen is deleted prior to the completion of the ScreenInit
-    phase the &s.code;ChipFreeScreen()&e.code; function is called when defined.
-
-    <quote><p>
-    &s.code;void ChipFreeScreen(int scrnindex, int flags)&e.code;
-    <quote><p>
-      Free any driver-allocated data that may have been allocated up to
-      and including an unsuccessful &s.code;ChipScreenInit()&e.code;
-      call.  This would predominantly be data allocated by
-      &s.code;ChipPreInit()&e.code; that persists across server
-      generations.  It would include the &s.code;driverPrivate&e.code;,
-      and any ``privates'' entries that modules may have allocated.
-
-    </quote>
-    </quote>
-
-
-<sect>Recommended driver functions
-<p>
-
-The functions outlined here are for internal use by the driver only.
-They are entirely optional, and are never accessed directly from higher
-layers.  The sample function declarations shown here are just examples.
-The interface (if any) used is up to the driver.
-
-<sect1>Save
-<p>
-
-    Save the video state.  This could be called from &s.code;ChipScreenInit()&e.code; and
-    (possibly) &s.code;ChipEnterVT()&e.code;.
-
-    <quote><p>
-    &s.code;void ChipSave(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      Saves the current state.  This will only be saving pre-server
-      states or states before returning to the server.  There is only
-      one current saved state per screen and it is stored in private
-      storage in the screen.
-
-    </quote>
-    </quote>
-
-<sect1>Restore
-<p>
-
-    Restore the original video state.  This could be called from the
-    &s.code;ChipLeaveVT()&e.code; and &s.code;ChipCloseScreen()&e.code;
-    functions.
-
-    <quote><p>
-    &s.code;void ChipRestore(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      Restores the saved state from the private storage.  Usually only
-      used for restoring text modes.
-
-    </quote>
-    </quote>
-
-
-<sect1>Initialise Mode
-<p>
-
-    Initialise a video mode.  This could be called from the
-    &s.code;ChipScreenInit()&e.code;, &s.code;ChipSwitchMode()&e.code;
-    and &s.code;ChipEnterVT()&e.code; functions.
-
-    <quote><p>
-    &s.code;Bool ChipModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)&e.code;
-    <quote><p>
-      Programs the hardware for the given video mode.
-
-    </quote>
-    </quote>
-
-
-<sect>Data and Data Structures
-<p>
-
-<sect1>Command line data
-<p>
-
-Command line options are typically global, and are stored in global
-variables.  These variables are read-only and are available to drivers
-via a function call interface.  Most of these command line values are
-processed via helper functions to ensure that they are treated consistently
-by all drivers.  The other means of access is provided for cases where
-the supplied helper functions might not be appropriate.
-
-Some of them are:
-
-<quote><verb>
-    xf86Verbose               verbosity level
-    xf86Bpp                   -bpp from the command line
-    xf86Depth                 -depth from the command line
-    xf86Weight                -weight from the command line
-    xf86Gamma                 -{r,g,b,}gamma from the command line
-    xf86FlipPixels            -flippixels from the command line
-    xf86ProbeOnly             -probeonly from the command line
-    defaultColorVisualClass   -cc from the command line
-</verb></quote>
-
-If we ever do allow for screen-specific command line options, we may
-need to rethink this.
-
-These can be accessed in a read-only manner by drivers with the following
-functions:
-
-    <quote><p>
-    &s.code;int xf86GetVerbosity()&e.code;
-    <quote><p>
-      Returns the value of &s.code;xf86Verbose&e.code;.
-
-    </quote>
-
-    &s.code;int xf86GetDepth()&e.code;
-    <quote><p>
-      Returns the &s.cmd;-depth&e.cmd; command line setting.  If not
-      set on the command line, &s.code;-1&e.code; is returned.
-
-    </quote>
-
-    &s.code;rgb xf86GetWeight()&e.code;
-    <quote><p>
-      Returns the &s.cmd;-weight&e.cmd; command line setting.  If not
-      set on the command line, &s.code;{0, 0, 0}&e.code; is returned.
-
-    </quote>
-
-    &s.code;Gamma xf86GetGamma()&e.code;
-    <quote><p>
-      Returns the &s.cmd;-gamma&e.cmd; or &s.cmd;-rgamma&e.cmd;,
-      &s.cmd;-ggamma&e.cmd;, &s.cmd;-bgamma&e.cmd; command line settings.
-      If not set on the command line, &s.code;{0.0, 0.0, 0.0}&e.code;
-      is returned.
-
-    </quote>
-
-    &s.code;Bool xf86GetFlipPixels()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if &s.cmd;-flippixels&e.cmd; is
-      present on the command line, and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;const char *xf86GetServerName()&e.code;
-    <quote><p>
-      Returns the name of the X server from the command line.
-
-    </quote>
-    </quote>
-
-<sect1>Data handling
-<p>
-
-Config file data contains parts that are global, and parts that are
-Screen specific.  All of it is parsed into data structures that neither
-the drivers or most other parts of the server need to know about.
-
-The global data is typically not required by drivers, and as such, most
-of it is stored in the private &s.code;xf86InfoRec&e.code;.
-
-The screen-specific data collected from the config file is stored in
-screen, device, display, monitor-specific data structures that are separate
-from the &s.code;ScrnInfoRecs&e.code;, with the appropriate elements/fields
-hooked into the &s.code;ScrnInfoRecs&e.code; as required.  The screen
-config data is held in &s.code;confScreenRec&e.code;, device data in
-the &s.code;GDevRec&e.code;, monitor data in the &s.code;MonRec&e.code;,
-and display data in the &s.code;DispRec&e.code;.
-
-The XFree86 common layer's screen specific data (the actual data in use
-for each screen) is held in the &s.code;ScrnInfoRecs&e.code;.  As has
-been outlined above, the &s.code;ScrnInfoRecs&e.code; are allocated at probe
-time, and it is the responsibility of the Drivers' &s.code;Probe()&e.code;
-and &s.code;PreInit()&e.code; functions to finish filling them in based
-on both data provided on the command line and data provided from the
-Config file.  The precedence for this is:
-
-    <quote>
-    command line  -&gt;  config file  -&gt;  probed/default data
-    </quote>
-
-For most things in this category there are helper functions that the
-drivers can use to ensure that the above precedence is consistently
-used.
-
-As well as containing screen-specific data that the XFree86 common layer
-(including essential parts of the server infrastructure as well as helper
-functions) needs to access, it also contains some data that drivers use
-internally.  When considering whether to add a new field to the
-&s.code;ScrnInfoRec&e.code;, consider the balance between the convenience
-of things that lots of drivers need and the size/obscurity of the
-&s.code;ScrnInfoRec&e.code;.
-
-Per-screen driver specific data that cannot be accommodated with the
-static &s.code;ScrnInfoRec&e.code; fields is held in a driver-defined
-data structure, a pointer to which is assigned to the
-&s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field.  This
-is per-screen data that persists across server generations (as does the
-bulk of the static &s.code;ScrnInfoRec&e.code; data).  It would typically
-also include the video card's saved state.
-
-Per-screen data for other modules that the driver uses (for example,
-the XAA module) that is reset for each server generation is hooked into
-the &s.code;ScrnInfoRec&e.code; through it's &s.code;privates&e.code;
-field.
-
-Once it has stabilised, the data structures and variables accessible to
-video drivers will be documented here.  In the meantime, those things
-defined in the &s.code;xf86.h&e.code; and &s.code;xf86str.h&e.code;
-files are visible to video drivers.  Things defined in
-&s.code;xf86Priv.h&e.code; and &s.code;xf86Privstr.h&e.code; are NOT
-intended to be visible to video drivers, and it is an error for a driver
-to include those files.
-
-
-<sect1>Accessing global data
-<p>
-
-Some other global state information that the drivers may access via
-functions is as follows:
-
-    <quote><p>
-    &s.code;Bool xf86ServerIsExiting()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if the server is at the end of a
-      generation and is in the process of exiting, and
-      &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;Bool xf86ServerIsResetting()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if the server is at the end of a
-      generation and is in the process of resetting, and
-      &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;Bool xf86ServerIsInitialising()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if the server is at the beginning of
-      a generation and is in the process of initialising, and
-      &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;Bool xf86ServerIsOnlyProbing()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if the -probeonly command line flag
-      was specified, and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;Bool xf86CaughtSignal()&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; if the server has caught a signal,
-      and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-    </quote>
-
-<sect1>Allocating private data
-<p>
-
-A driver and any module it uses may allocate per-screen private storage
-in either the &s.code;ScreenRec&e.code; (DIX level) or
-&s.code;ScrnInfoRec&e.code; (XFree86 common layer level).
-&s.code;ScreenRec&e.code; storage persists only for a single server
-generation, and &s.code;ScrnInfoRec&e.code; storage persists across
-generations for the lifetime of the server.
-
-The &s.code;ScreenRec&e.code; &s.code;devPrivates&e.code; data must be
-reallocated/initialised at the start of each new generation.  This is
-normally done from the &s.code;ChipScreenInit()&e.code; function, and
-Init functions for other modules that it calls.  Data allocated in this
-way should be freed by the driver's &s.code;ChipCloseScreen()&e.code;
-functions, and Close functions for other modules that it calls.  A new
-&s.code;devPrivates&e.code; entry is allocated by calling the
-&s.code;AllocateScreenPrivateIndex()&e.code; function.
-
-    <quote><p>
-    &s.code;int AllocateScreenPrivateIndex()&e.code;
-    <quote><p>
-      This function allocates a new element in the
-      &s.code;devPrivates&e.code; field of all currently existing
-      &s.code;ScreenRecs&e.code;.  The return value is the index of this
-      new element in the &s.code;devPrivates&e.code; array.  The
-      &s.code;devPrivates&e.code; field is of type
-      &s.code;DevUnion&e.code;:
-
-	<verb>
-        typedef union _DevUnion {
-            pointer             ptr;
-            long                val;
-            unsigned long       uval;
-            pointer             (*fptr)(void);
-        } DevUnion;
-	</verb>
-
-      which allows the element to be used for any of the above types.
-      It is commonly used as a pointer to data that the caller allocates
-      after the new index has been allocated.
-
-      This function will return &s.code;-1&e.code; when there is an
-      error allocating the new index.
-
-    </quote>
-    </quote>
-
-The &s.code;ScrnInfoRec&e.code; &s.code;privates&e.code; data persists
-for the life of the server, so only needs to be allocated once.  This
-should be done from the &s.code;ChipPreInit()&e.code; function, and Init
-functions for other modules that it calls.  Data allocated in this way
-should be freed by the driver's &s.code;ChipFreeScreen()&e.code; functions,
-and Free functions for other modules that it calls.  A new
-&s.code;privates&e.code; entry is allocated by calling the
-&s.code;xf86AllocateScrnInfoPrivateIndex()&e.code; function.
-
-
-    <quote><p>
-    &s.code;int xf86AllocateScrnInfoPrivateIndex()&e.code;
-    <quote><p>
-      This function allocates a new element in the &s.code;privates&e.code;
-      field of all currently existing &s.code;ScrnInfoRecs&e.code;.
-      The return value is the index of this new element in the
-      &s.code;privates&e.code; array.  The &s.code;privates&e.code;
-      field is of type &s.code;DevUnion&e.code;:
-
-        <verb>
-        typedef union _DevUnion {
-            pointer             ptr;
-            long                val;
-            unsigned long       uval;
-            pointer             (*fptr)(void);
-        } DevUnion;
-        </verb>
-
-      which allows the element to be used for any of the above types.
-      It is commonly used as a pointer to data that the caller allocates
-      after the new index has been allocated.
-
-      This function will not return when there is an error allocating
-      the new index.  When there is an error it will cause the server
-      to exit with a fatal error.  The similar function for allocation
-      privates in the &s.code;ScreenRec&e.code;
-      (&s.code;AllocateScreenPrivateIndex()&e.code;) differs in this
-      respect by returning &s.code;-1&e.code; when the allocation fails.
-
-    </quote>
-    </quote>
-
-<sect>Keeping Track of Bus Resources<label id="rac">
-<p>
-
-<sect1>Theory of Operation
-<p>
-
-The XFree86 common layer has knowledge of generic access control mechanisms
-for devices on certain bus systems (currently the PCI bus) as well as
-of methods to enable or disable access to the buses itself.  Furthermore
-it can access information on resources decoded by these devices and if
-necessary modify it.
-
-When first starting the Xserver collects all this information, saves it
-for restoration, checks it for consistency, and if necessary, corrects
-it.  Finally it disables all resources on a generic level prior to
-calling any driver function.
-
-When the &s.code;Probe()&e.code; function of each driver is called the
-device sections are matched against the devices found in the system.
-The driver may probe devices at this stage that cannot be identified by
-using device independent methods.  Access to all resources that can be
-controlled in a device independent way is disabled.  The
-&s.code;Probe()&e.code; function should register all non-relocatable
-resources at this stage.  If a resource conflict is found between
-exclusive resources the driver will fail immediately.  Optionally the
-driver might specify an &s.code;EntityInit()&e.code;,
-&s.code;EntityLeave()&e.code; and &s.code;EntityEnter()&e.code; function.
-
-&s.code;EntityInit()&e.code; can be used to disable any shared resources
-that are not controlled by the generic access control functions.  It is
-called prior to the PreInit phase regardless if an entity is active or
-not.  When calling the &s.code;EntityInit()&e.code;,
-&s.code;EntityEnter()&e.code; and &s.code;EntityLeave()&e.code; functions
-the common level will disable access to all other entities on a generic
-level.  Since the common level has no knowledge of device specific
-methods to disable access to resources it cannot be guaranteed that
-certain resources are not decoded by any other entity until the
-&s.code;EntityInit()&e.code; or &s.code;EntityEnter()&e.code; phase is
-finished.  Device drivers should therefore register all those resources
-which they are going to disable.  If these resources are never to be
-used by any driver function they may be flagged &s.code;ResInit&e.code;
-so that they can be removed from the resource list after processing all
-&s.code;EntityInit()&e.code; functions.  &s.code;EntityEnter()&e.code;
-should disable decoding of all resources which are not registered as
-exclusive and which are not handled by the generic access control in
-the common level.  The difference to &s.code;EntityInit()&e.code; is
-that the latter one is only called once during lifetime of the server.
-It can therefore be used to set up variables prior to disabling resources.
-&s.code;EntityLeave()&e.code; should restore the original state when
-exiting the server or switching to a different VT.  It also needs to
-disable device specific access functions if they need to be disabled on
-server exit or VT switch.  The default state is to enable them before
-giving up the VT.
-
-In &s.code;PreInit()&e.code; phase each driver should check if any
-sharable resources it has registered during &s.code;Probe()&e.code; has
-been denied and take appropriate action which could simply be to fail.
-If it needs to access resources it has disabled during
-&s.code;EntitySetup()&e.code; it can do so provided it has registered
-these and will disable them before returning from
-&s.code;PreInit()&e.code;.  This also applies to all other driver
-functions.  Several functions are provided to request resource ranges,
-register these, correct PCI config space and add replacements for the
-generic access functions.  Resources may be marked ``disabled'' or
-``unused'' during OPERATING stage.  Although these steps could also be
-performed in &s.code;ScreenInit()&e.code;, this is not desirable.
-
-Following &s.code;PreInit()&e.code; phase the common level determines
-if resource access control is needed.  This is the case if more than
-one screen is used.  If necessary the RAC wrapper module is loaded.  In
-&s.code;ScreenInit()&e.code; the drivers can decide which operations
-need to be placed under RAC.  Available are the frame buffer operations,
-the pointer operations and the colormap operations.  Any operation that
-requires resources which might be disabled during OPERATING state should
-be set to use RAC.  This can be specified separately for memory and IO
-resources.
-
-When &s.code;ScreenInit()&e.code; phase is done the common level will
-determine which shared resources are requested by more than one driver
-and set the access functions accordingly.  This is done following these
-rules:
-
-<enum>
-<item>The sharable resources registered by each entity are compared.  If
-   a resource is registered by more than one entity the entity will be
-   marked to need to share this resources type (&s.code;IO&e.code; or
-   &s.code;MEM&e.code;).
-
-<item>A resource marked ``disabled'' during OPERATING state will be ignored
-   entirely.
-
-<item>A resource marked ``unused'' will only conflicts with an overlapping
-   resource of an other entity if the second is actually in use during
-   OPERATING state.
-
-<item>If an ``unused'' resource was found to conflict however the entity
-   does not use any other resource of this type the entire resource type
-   will be disabled for that entity.
-</enum>
-
-The driver has the choice among different ways to control access to
-certain resources:
-
-<enum>
-<item>It can rely on the generic access functions.  This is probably the
-   most common case.  Here the driver only needs to register any resource
-   it is going to use.
-
-<item>It can replace the generic access functions by driver specific
-   ones.  This will mostly be used in cases where no generic access
-   functions are available.  In this case the driver has to make sure
-   these resources are disabled when entering the &s.code;PreInit()&e.code;
-   stage.  Since the replacement functions are registered in
-   &s.code;PreInit()&e.code; the driver will have to enable these
-   resources itself if it needs to access them during this state.  The
-   driver can specify if the replacement functions can control memory
-   and/or I/O resources separately.
-
-<item>The driver can enable resources itself when it needs them.  Each
-   driver function enabling them needs to disable them before it will
-   return.  This should be used if a resource which can be controlled
-   in a device dependent way is only required during SETUP state.  This
-   way it can be marked ``unused'' during OPERATING state.
-</enum>
-
-A resource which is decoded during OPERATING state however never accessed
-by the driver should be marked unused.
-
-Since access switching latencies are an issue during Xserver operation,
-the common level attempts to minimize the number of entities that need
-to be placed under RAC control.  When a wrapped operation is called,
-the &s.code;EnableAccess()&e.code; function is called before control is
-passed on.  &s.code;EnableAccess()&e.code; checks if a screen is under
-access control.  If not it just establishes bus routing and returns.
-If the screen needs to be under access control,
-&s.code;EnableAccess()&e.code; determines which resource types
-(&s.code;MEM&e.code;, &s.code;IO&e.code;) are required.  Then it tests
-if this access is already established.  If so it simply returns.  If
-not it disables the currently established access, fixes bus routing and
-enables access to all entities registered for this screen.
-
-Whenever a mode switch or a VT-switch is performed the common level will
-return to SETUP state.
-
-<sect1>Resource Types
-<p>
-
-Resource have certain properties.  When registering resources each range
-is accompanied by a flag consisting of the ORed flags of the different
-properties the resource has.  Each resource range may be classified
-according to
-
-<itemize>
-  <item>its physical properties i.e., if it addresses
-       memory (&s.code;ResMem&e.code;)  or
-       I/O space (&s.code;ResIo&e.code;),
-  <item>if it addresses a
-       block (&s.code;ResBlock&e.code;) or
-       sparse (&s.code;ResSparse&e.code;)
-    range,
-  <item>its access properties.
-</itemize>
-
-There are two known access properties:
-
-<itemize>
-  <item>&s.code;ResExclusive&e.code;
-    for resources which may not be shared with any other device and
-  <item>&s.code;ResShared&e.code;
-    for resources which can be disabled and therefore can be shared.
-</itemize>
-
-If it is necessary to test a resource against any type a generic access
-type &s.code;ResAny&e.code; is provided.  If this is set the resource
-will conflict with any resource of a different entity intersecting its
-range.  Further it can be specified that a resource is decoded however
-never used during any stage (&s.code;ResUnused&e.code;) or during
-OPERATING state (&s.code;ResUnusedOpr&e.code;).  A resource only visible
-during the init functions (ie.  &s.code;EntityInit()&e.code;,
-&s.code;EntityEnter()&e.code; and &s.code;EntityLeave()&e.code; should
-be registered with the flag &s.code;ResInit&e.code;.  A resource that
-might conflict with background resource ranges may be flagged with
-&s.code;ResBios&e.code;.  This might be useful when registering resources
-ranges that were assigned by the system Bios.
-
-Several predefined resource lists are available for VGA and 8514/A
-resources in &s.code;common/xf86Resources.h&e.code;.
-
-<sect1>Available Functions<label id="avail">
-<p>
-
-The functions provided for resource management are listed in their order
-of use in the driver.
-
-
-<sect2>Probe Phase
-<p>
-
-In this phase each driver detects those resources it is able to drive,
-creates an entity record for each of them, registers non-relocatable
-resources and allocates screens and adds the resources to screens.
-
-Two helper functions are provided for matching device sections in the
-xorg.conf file to the devices:
-
-    <quote><p>
-    &s.code;int xf86MatchPciInstances(const char *driverName, int vendorID,
-		&f.indent;SymTabPtr chipsets, PciChipsets *PCIchipsets,
-                &f.indent;GDevPtr *devList, int numDevs, DriverPtr drvp,
-                &f.indent;int **foundEntities)&e.code;
-    <quote><p>
-      This function finds matches between PCI cards that a driver supports
-      and config file device sections.  It is intended for use in the
-      &s.code;ChipProbe()&e.code; function of drivers for PCI cards.
-      Only probed PCI devices with a vendor ID matching
-      &s.code;vendorID&e.code; are considered.  &s.code;devList&e.code;
-      and &s.code;numDevs&e.code; are typically those found from
-      calling &s.code;xf86MatchDevice()&e.code;, and represent the active
-      config file device sections relevant to the driver.
-      &s.code;PCIchipsets&e.code; is a table that provides a mapping
-      between the PCI device IDs, the driver's internal chipset tokens
-      and a list of fixed resources.
-
-      When a device section doesn't have a &s.key;BusID&e.key; entry it
-      can only match the primary video device.  Secondary devices are
-      only matched with device sections that have a matching
-      &s.key;BusID&e.key; entry.
-
-      Once the preliminary matches have been found, a final match is
-      confirmed by checking if the chipset override, ChipID override or
-      probed PCI chipset type match one of those given in the
-      &s.code;chipsets&e.code; and &s.code;PCIchipsets&e.code; lists.
-      The &s.code;PCIchipsets&e.code; list includes a list of the PCI
-      device IDs supported by the driver.  The list should be terminated
-      with an entry with PCI ID &s.code;-1&e.code;".  The
-      &s.code;chipsets&e.code; list is a table mapping the driver's
-      internal chipset tokens to names, and should be terminated with
-      a &s.code;NULL&e.code; entry.  Only those entries with a
-      corresponding entry in the &s.code;PCIchipsets&e.code; list are
-      considered.  The order of precedence is: config file chipset,
-      config file ChipID, probed PCI device ID.
-
-      In cases where a driver handles PCI chipsets with more than one
-      vendor ID, it may set &s.code;vendorID&e.code; to
-      &s.code;0&e.code;, and OR each devID in the list with (the
-      vendor&nbsp;ID&nbsp;&lt;&lt;&nbsp;16).
-
-      Entity index numbers for confirmed matches are returned as an
-      array via &s.code;foundEntities&e.code;.  The PCI information,
-      chipset token and device section for each match are found in the
-      &s.code;EntityInfoRec&e.code; referenced by the indices.
-
-      The function return value is the number of confirmed matches.  A
-      return value of &s.code;-1&e.code; indicates an internal error.
-      The returned &s.code;foundEntities&e.code; array should be freed
-      by the driver with &s.code;xfree()&e.code; when it is no longer
-      needed in cases where the return value is greater than zero.
-
-    </quote>
-
-    &s.code;int xf86MatchIsaInstances(const char *driverName,
-		     &f.indent;SymTabPtr chipsets, IsaChipsets *ISAchipsets,
-		     &f.indent;DriverPtr drvp, FindIsaDevProc FindIsaDevice,
-		     &f.indent;GDevPtr *devList, int numDevs,
-					int **foundEntities)&e.code;
-    <quote><p>
-      This function finds matches between ISA cards that a driver supports
-      and config file device sections.  It is intended for use in the
-      &s.code;ChipProbe()&e.code; function of drivers for ISA cards.
-      &s.code;devList&e.code; and &s.code;numDevs&e.code; are
-      typically those found from calling &s.code;xf86MatchDevice()&e.code;,
-      and represent the active config file device sections relevant to
-      the driver.  &s.code;ISAchipsets&e.code; is a table that provides
-      a mapping between the driver's internal chipset tokens and the
-      resource classes.  &s.code;FindIsaDevice&e.code; is a
-      driver-provided function that probes the hardware and returns the
-      chipset token corresponding to what was detected, and
-      &s.code;-1&e.code; if nothing was detected.
-
-      If the config file device section contains a chipset entry, then
-      it is checked against the &s.code;chipsets&e.code; list.  When
-      no chipset entry is present, the &s.code;FindIsaDevice&e.code;
-      function is called instead.
-
-      Entity index numbers for confirmed matches are returned as an
-      array via &s.code;foundEntities&e.code;.  The chipset token and
-      device section for each match are found in the
-      &s.code;EntityInfoRec&e.code; referenced by the indices.
-
-      The function return value is the number of confirmed matches.  A
-      return value of &s.code;-1&e.code; indicates an internal error.
-      The returned &s.code;foundEntities&e.code; array should be freed
-      by the driver with &s.code;xfree()&e.code; when it is no longer
-      needed in cases where the return value is greater than zero.
-
-    </quote>
-    </quote>
-
-These two helper functions make use of several core functions that are
-available at the driver level:
-
-    <quote><p>
-    &s.code;Bool xf86ParsePciBusString(const char *busID, int *bus,
-			&f.indent;int *device, int *func)&e.code;
-    <quote><p>
-      Takes a &s.code;BusID&e.code; string, and if it is in the correct
-      format, returns the PCI &s.code;bus&e.code;, &s.code;device&e.code;,
-      &s.code;func&e.code; values that it indicates.  The format of the
-      string is expected to be "PCI:bus:device:func" where each of `bus',
-      `device' and `func' are decimal integers.  The ":func" part may
-      be omitted, and the func value assumed to be zero, but this isn't
-      encouraged.  The "PCI" prefix may also be omitted.  The prefix
-      "AGP" is currently equivalent to the "PCI" prefix.  If the string
-      isn't a valid PCI BusID, the return value is &s.code;FALSE&e.code;.
-
-    </quote>
-
-
-    &s.code;Bool xf86ComparePciBusString(const char *busID, int bus,
-			&f.indent;int device, int func)&e.code;
-    <quote><p>
-      Compares a &s.code;BusID&e.code; string with PCI &s.code;bus&e.code;,
-      &s.code;device&e.code;, &s.code;func&e.code; values.  If they
-      match &s.code;TRUE&e.code; is returned, and &s.code;FALSE&e.code;
-      if they don't.
-
-    </quote>
-
-    &s.code;Bool xf86ParseIsaBusString(const char *busID)&e.code;
-    <quote><p>
-      Compares a &s.code;BusID&e.code; string with the ISA bus ID string
-      ("ISA" or "ISA:").  If they match &s.code;TRUE&e.code; is returned,
-      and &s.code;FALSE&e.code; if they don't.
-
-    </quote>
-
-    &s.code;Bool xf86CheckPciSlot(int bus, int device, int func)&e.code;
-    <quote><p>
-      Checks if the PCI slot &s.code;bus:device:func&e.code; has been
-      claimed.  If so, it returns &s.code;FALSE&e.code;, and otherwise
-      &s.code;TRUE&e.code;.
-
-    </quote>
-
-    &s.code;int xf86ClaimPciSlot(int bus, int device, int func, DriverPtr drvp,
-			&f.indent;int chipset, GDevPtr dev, Bool active)&e.code;
-    <quote><p>
-      This function is used to claim a PCI slot, allocate the associated
-      entity record and initialise their data structures.  The return
-      value is the index of the newly allocated entity record, or
-      &s.code;-1&e.code; if the claim fails.  This function should always
-      succeed if &s.code;xf86CheckPciSlot()&e.code; returned
-      &s.code;TRUE&e.code; for the same PCI slot.
-
-    </quote>
-
-    &s.code;Bool xf86IsPrimaryPci(void)&e.code;
-    <quote><p>
-      This function returns &s.code;TRUE&e.code; if the primary card is
-      a PCI device, and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-
-    &s.code;int xf86ClaimIsaSlot(DriverPtr drvp, int chipset,
-			&f.indent;GDevPtr dev, Bool active)&e.code;
-    <quote><p>
-      This allocates an entity record entity and initialise the data
-      structures.  The return value is the index of the newly allocated
-      entity record.
-
-    </quote>
-
-    &s.code;Bool xf86IsPrimaryIsa(void)&e.code;
-    <quote><p>
-      This function returns &s.code;TRUE&e.code; if the primary card is
-      an ISA (non-PCI) device, and &s.code;FALSE&e.code; otherwise.
-
-    </quote>
-    </quote>
-
-Two helper functions are provided to aid configuring entities:
-    <quote><p>
-    &s.code;ScrnInfoPtr xf86ConfigPciEntity(ScrnInfoPtr pScrn,
-                                 &f.indent;int scrnFlag, int entityIndex,
-                                 &f.indent;PciChipsets *p_chip,
-                                 &f.indent;resList res, EntityProc init,
-                                 &f.indent;EntityProc enter, EntityProc leave,
-                                 &f.indent;pointer private)&e.code;
-    <p>
-    &s.code;ScrnInfoPtr xf86ConfigIsaEntity(ScrnInfoPtr pScrn,
-                                 &f.indent;int scrnFlag, int entityIndex,
-                                 &f.indent;IsaChipsets *i_chip,
-                                 &f.indent;resList res, EntityProc init,
-                                 &f.indent;EntityProc enter, EntityProc leave,
-                                 &f.indent;pointer private)&e.code;
-    <quote><p>
-      These functions are used to register the non-relocatable resources
-      for an entity, and the optional entity-specific &s.code;Init&e.code;, &s.code;Enter&e.code; and
-      &s.code;Leave&e.code; functions.  Usually the list of fixed resources is obtained
-      from the Isa/PciChipsets lists.  However an additional list of
-      resources may be passed.  Generally this is not required.
-      For active entities a &s.code;ScrnInfoRec&e.code; is allocated
-      if the &s.code;pScrn&e.code; argument is &s.code;NULL&e.code;.
-The
-      return value is &s.code;TRUE&e.code; when successful.  The init, enter, leave
-      functions are defined as follows:
-
-        <quote>
-        &s.code;typedef void (*EntityProc)(int entityIndex,
-			&f.indent;pointer private)&e.code;
-        </quote>
-
-      They are passed the entity index and a pointer to a private scratch
-      area.  This can be set up during &s.code;Probe()&e.code; and
-      its address can be passed to
-      &s.code;xf86ConfigIsaEntity()&e.code; and
-      &s.code;xf86ConfigPciEntity()&e.code; as the last argument.
-
-    </quote>
-    </quote>
-
-These two helper functions make use of several core functions that are
-available at the driver level:
-    <quote><p>
-    &s.code;void xf86ClaimFixedResources(resList list, int entityIndex)&e.code;
-    <quote><p>
-      This function registers the non-relocatable resources which cannot
-      be disabled and which therefore would cause the server to fail
-      immediately if they were found to conflict.  It also records
-      non-relocatable but sharable resources for processing after the
-      &s.code;Probe()&e.code; phase.
-
-    </quote>
-
-    &s.code;Bool xf86SetEntityFuncs(int entityIndex, EntityProc init,
-			&f.indent;EntityProc enter, EntityProc leave, pointer)&e.code;
-    <quote><p>
-      This function registers with an entity the &s.code;init&e.code;,
-      &s.code;enter&e.code;, &s.code;leave&e.code; functions along
-      with the pointer to their private area.
-
-    </quote>
-
-    &s.code;void xf86AddEntityToScreen(ScrnInfoPtr pScrn, int entityIndex)&e.code;
-    <quote><p>
-      This function associates the entity referenced by
-      &s.code;entityIndex&e.code; with the screen.
-
-    </quote>
-    </quote>
-
-<sect2>PreInit Phase
-<p>
-
-During this phase the remaining resources should be registered.
-&s.code;PreInit()&e.code; should call &s.code;xf86GetEntityInfo()&e.code;
-to obtain a pointer to an &s.code;EntityInfoRec&e.code; for each entity
-it is able to drive and check if any resource are listed in its
-&s.code;resources&e.code; field.  If resources registered in the Probe
-phase have been rejected in the post-Probe phase
-(&s.code;resources&e.code; is non-&s.code;NULL&e.code;), then the driver should
-decide if it can continue without using these or if it should fail.
-
-    <quote><p>
-    &s.code;EntityInfoPtr xf86GetEntityInfo(int entityIndex)&e.code;
-    <quote><p>
-      This function returns a pointer to the &s.code;EntityInfoRec&e.code;
-      referenced by &s.code;entityIndex&e.code;.  The returned
-      &s.code;EntityInfoRec&e.code; should be freed with
-      &s.code;xfree()&e.code; when no longer needed.
-
-    </quote>
-    </quote>
-Several functions are provided to simplify resource registration:
-    <quote><p>
-    &s.code;Bool xf86IsEntityPrimary(int entityIndex)&e.code;
-    <quote><p>
-      This function returns &s.code;TRUE&e.code; if the entity referenced
-      by &s.code;entityIndex&e.code; is the primary display device (i.e.,
-      the one initialised at boot time and used in text mode).
-
-    </quote>
-
-    &s.code;Bool xf86IsScreenPrimary(int scrnIndex)&e.code;
-    <quote><p>
-      This function returns &s.code;TRUE&e.code; if the primary entity
-      is registered with the screen referenced by
-      &s.code;scrnIndex&e.code;.
-
-    </quote>
-
-    &s.code;pciVideoPtr xf86GetPciInfoForEntity(int entityIndex)&e.code;
-    <quote><p>
-      This function returns a pointer to the &s.code;pciVideoRec&e.code;
-      for the specified entity.  If the entity is not a PCI device,
-      &s.code;NULL&e.code; is returned.
-
-    </quote>
-    </quote>
-
-The primary function for registration of resources is:
-    <quote><p>
-    &s.code;resPtr xf86RegisterResources(int entityIndex, resList list,
-			&f.indent;int access)&e.code;
-    <quote><p>
-      This function tries to register the resources in
-      &s.code;list&e.code;.  If list is &s.code;NULL&e.code; it tries
-      to determine the resources automatically.  This only works for
-      entities that provide a generic way to read out the resource ranges
-      they decode.  So far this is only the case for PCI devices.  By
-      default the PCI resources are registered as shared
-      (&s.code;ResShared&e.code;) if the driver wants to set a different
-      access type it can do so by specifying the access flags in the
-      third argument.  A value of &s.code;0&e.code; means to use the
-      default settings.  If for any reason the resource broker is not
-      able to register some of the requested resources the function will
-      return a pointer to a list of the failed ones.  In this case the
-      driver may be able to move the resource to different locations.
-      In case of PCI bus entities this is done by passing the list of
-      failed resources to &s.code;xf86ReallocatePciResources()&e.code;.
-      When the registration succeeds, the return value is
-      &s.code;NULL&e.code;.
-
-    </quote>
-
-    &s.code;resPtr xf86ReallocatePciResources(int entityIndex, resPtr pRes)&e.code;
-    <quote><p>
-      This function takes a list of PCI resources that need to be
-      reallocated and returns &s.code;NULL&e.code when all relocations are
-      successful.
-      &s.code;xf86RegisterResources()&e.code; should be called again to
-      register the relocated resources with the broker.
-      If the reallocation fails, a list of the resources that could not be
-      relocated is returned.
-
-    </quote>
-    </quote>
-
-Two functions are provided to obtain a resource range of a given type:
-    <quote><p>
-    &s.code;resRange xf86GetBlock(long type, memType size,
-			&f.indent;memType window_start, memType window_end,
-			&f.indent;memType align_mask, resPtr avoid)&e.code;
-    <quote><p>
-      This function tries to find a block range of size
-      &s.code;size&e.code; and type &s.code;type&e.code; in a window
-      bound by &s.code;window_start&e.code; and &s.code;window_end&e.code;
-      with the alignment specified in &s.code;align_mask&e.code;.
-      Optionally a list of resource ranges which should be avoided within
-      the window can be supplied.  On failure a zero-length range of
-      type &s.code;ResEnd&e.code; will be returned.
-
-    </quote>
-    &s.code;resRange xf86GetSparse(long type, memType fixed_bits,
-			&f.indent;memType decode_mask, memType address_mask,
-			&f.indent;resPtr avoid)&e.code;
-    <quote><p>
-      This function is like the previous one, but attempts to find a
-      sparse range instead of a block range.  Here three values have to
-      be specified: the &s.code;address_mask&e.code; which marks all
-      bits of the mask part of the address, the &s.code;decode_mask&e.code;
-      which masks out the bits which are hardcoded and are therefore
-      not available for relocation and the values of the fixed bits.
-      The function tries to find a base that satisfies the given condition.
-      If the function fails it will return a zero range of type
-      &s.code;ResEnd&e.code;.  Optionally it might be passed a list of
-      resource ranges to avoid.
-
-    </quote>
-    </quote>
-
-Some PCI devices are broken in the sense that they return invalid size
-information for a certain resource.  In this case the driver can supply
-the correct size and make sure that the resource range allocated for
-the card is large enough to hold the address range decoded by the card.
-The function &s.code;xf86FixPciResource()&e.code; can be used to do this:
-    <quote><p>
-    &s.code;Bool xf86FixPciResource(int entityIndex, unsigned int prt,
-				&f.indent;CARD32 alignment, long type)&e.code;
-    <quote><p>
-      This function fixes a PCI resource allocation.  The
-      &s.code;prt&e.code; parameter contains the number of the PCI base
-      register that needs to be fixed (&s.code;0-5&e.code;, and
-      &s.code;6&e.code; for the BIOS base register).  The size is
-      specified by the alignment.  Since PCI resources need to span an
-      integral range of size &s.code;2^n&e.code;, the alignment also
-      specifies the number of addresses that will be decoded.  If the
-      driver specifies a type mask it can override the default type for
-      PCI resources which is &s.code;ResShared&e.code;.  The resource
-      broker needs to know that to find a matching resource range.  This
-      function should be called before calling
-      &s.code;xf86RegisterResources()&e.code;.  The return value is
-      &s.code;TRUE&e.code; when the function succeeds.
-
-    </quote>
-
-    &s.code;Bool xf86CheckPciMemBase(pciVideoPtr pPci, memType base)&e.code;
-    <quote><p>
-      This function checks that the memory base address specified matches
-      one of the PCI base address register values for the given PCI
-      device.  This is mostly used to check that an externally provided
-      base address (e.g., from a config file) matches an actual value
-      allocated to a device.
-
-    </quote>
-    </quote>
-
-The driver may replace the generic access control functions for an entity.
-This is done with the &s.code;xf86SetAccessFuncs()&e.code;:
-    <quote><p>
-    &s.code;void xf86SetAccessFuncs(EntityInfoPtr pEnt,
-                        &f.indent;xf86SetAccessFuncPtr funcs,
-			&f.indent;xf86SetAccessFuncPtr oldFuncs)&e.code;
-    <quote><p>
-     with:
-    </quote>
-
-    <verb>
-      typedef struct {
-          xf86AccessPtr mem;
-          xf86AccessPtr io;
-          xf86AccessPtr io_mem;
-      } xf86SetAccessFuncRec, *xf86SetAccessFuncPtr;
-    </verb>
-
-    <quote><p>
-      The driver can pass three functions: one for I/O access, one for
-      memory access and one for combined memory and I/O access.  If the
-      memory access and combined access functions are identical the
-      common level assumes that the memory access cannot be controlled
-      independently of I/O access, if the I/O access function and the
-      combined access functions are the same it is assumed that I/O can
-      not be controlled independently.  If memory and I/O have to be
-      controlled together all three values should be the same.  If a
-      non &s.code;NULL&e.code; value is passed as third argument it is
-      interpreted as an address where to store the old access record.
-      If the third argument is &s.code;NULL&e.code; it will be assumed
-      that the generic access should be enabled before replacing the
-      access functions.  Otherwise it will be disabled.  The driver may
-      enable them itself using the returned values.  It should do this
-      from its replacement access functions as the generic access may
-      be disabled by the common level on certain occasions.  If replacement
-      functions are specified they must control all resources of the
-      specific type registered for the entity.
-
-    </quote>
-    </quote>
-
-To find out if a specific resource range conflicts with another
-resource the &s.code;xf86ChkConflict()&e.code; function may be used:
-    <quote><p>
-    &s.code;memType xf86ChkConflict(resRange *rgp, int entityIndex)&e.code;
-    <quote><p>
-      This function checks if the resource range &s.code;rgp&e.code; of
-      for the specified entity conflicts with with another resource.
-      If a conflict is found, the address of the start of the conflict
-      is returned.  The return value is zero when there is no conflict.
-
-    </quote>
-    </quote>
-
-The OPERATING state properties of previously registered fixed resources
-can be set with the &s.code;xf86SetOperatingState()&e.code; function:
-    <quote><p>
-    &s.code;resPtr xf86SetOperatingState(resList list, int entityIndex,
-			&f.indent;int mask)&e.code;
-    <quote><p>
-      This function is used to set the status of a resource during
-      OPERATING state.  &s.code;list&e.code; holds a list to which
-      &s.code;mask&e.code; is to be applied.  The parameter
-      &s.code;mask&e.code; may have the value &s.code;ResUnusedOpr&e.code;
-      and &s.code;ResDisableOpr&e.code;.  The first one should be used
-      if a resource isn't used by the driver during OPERATING state
-      although it is decoded by the device, while the latter one indicates
-      that the resource is not decoded during OPERATING state.  Note
-      that the resource ranges have to match those specified during
-      registration.  If a range has been specified starting at
-      &s.code;A&e.code; and ending at &s.code;B&e.code; and suppose
-      &s.code;C&e.code; us a value satisfying
-      &s.code;A&nbsp;&lt;&nbsp;C&nbsp;&lt;&nbsp;B&e.code; one may not
-      specify the resource range &s.code;(A,B)&e.code; by splitting it
-      into two ranges &s.code;(A,C)&e.code; and &s.code;(C,B)&e.code;.
-
-    </quote>
-    </quote>
-
-The following two functions are provided for special cases:
-    <quote><p>
-    &s.code;void xf86RemoveEntityFromScreen(ScrnInfoPtr pScrn, int entityIndex)&e.code;
-    <quote><p>
-      This function may be used to remove an entity from a screen.  This
-      only makes sense if a screen has more than one entity assigned or
-      the screen is to be deleted.  No test is made if the screen has
-      any entities left.
-
-    </quote>
-
-    &s.code;void xf86DeallocateResourcesForEntity(int entityIndex, long type)&e.code;
-    <quote><p>
-      This function deallocates all resources of a given type registered
-      for a certain entity from the resource broker list.
-
-    </quote>
-    </quote>
-
-<sect2>ScreenInit Phase
-<p>
-
-All that is required in this phase is to setup the RAC flags.  Note that
-it is also permissible to set these flags up in the PreInit phase.  The
-RAC flags are held in the &s.code;racIoFlags&e.code; and &s.code;racMemFlags&e.code; fields of the
-&s.code;ScrnInfoRec&e.code; for each screen.  They specify which graphics operations
-might require the use of shared resources.  This can be specified
-separately for memory and I/O resources.  The available flags are defined
-in &s.code;rac/xf86RAC.h&e.code;.  They are:
-
-    &s.code;RAC_FB&e.code;
-	<quote>
-	for framebuffer operations (including hw acceleration)
-	</quote>
-    &s.code;RAC_CURSOR&e.code;
-	<quote>
-	for Cursor operations
-        (??? I'm not sure if we need this for SW cursor it depends
-         on which level the sw cursor is drawn)
-	</quote>
-    &s.code;RAC_COLORMAP&e.code;
-	<quote>
-	for colormap operations
-	</quote>
-    &s.code;RAC_VIEWPORT&e.code;
-	<quote>
-	for the call to &s.code;ChipAdjustFrame()&e.code; </quote>
-
-
-The flags are ORed together.
-
-<sect>Config file ``Option'' entries<label id="options">
-<p>
-
-Option entries are permitted in most sections and subsections of the
-config file.  There are two forms of option entries:
-
-<descrip>
-<tag>Option "option-name"</tag>
-	A boolean option.
-<tag>Option "option-name" "option-value"</tag>
-	An option with an arbitrary value.
-</descrip>
-
-The option entries are handled by the parser, and a list of the parsed
-options is included with each of the appropriate data structures that
-the drivers have access to.  The data structures used to hold the option
-information are opaque to the driver, and a driver must not access the
-option data directly.  Instead, the common layer provides a set of
-functions that may be used to access, check and manipulate the option
-data.
-
-First, the low level option handling functions.  In most cases drivers
-would not need to use these directly.
-
-    <quote><p>
-    &s.code;pointer xf86FindOption(pointer options, const char *name)&e.code;
-    <quote><p>
-      Takes a list of options and an option name, and returns a handle
-      for the first option entry in the list matching the name.  Returns
-      &s.code;NULL&e.code; if no match is found.
-
-    </quote>
-
-    &s.code;char *xf86FindOptionValue(pointer options, const char *name)&e.code;
-    <quote><p>
-      Takes a list of options and an option name, and returns the value
-      associated with the first option entry in the list matching the
-      name.  If the matching option has no value, an empty string
-      (&s.code;""&e.code;) is returned.  Returns &s.code;NULL&e.code;
-      if no match is found.
-
-    </quote>
-
-    &s.code;void xf86MarkOptionUsed(pointer option)&e.code;
-    <quote><p>
-      Takes a handle for an option, and marks that option as used.
-
-    </quote>
-
-    &s.code;void xf86MarkOptionUsedByName(pointer options, const char *name)&e.code;
-    <quote><p>
-      Takes a list of options and an option name and marks the first
-      option entry in the list matching the name as used.
-
-    </quote>
-    </quote>
-
-
-Next, the higher level functions that most drivers would use.
-    <quote><p>
-    &s.code;void xf86CollectOptions(ScrnInfoPtr pScrn, pointer extraOpts)&e.code;
-    <quote><p>
-      Collect the options from each of the config file sections used by
-      the screen (&s.code;pScrn&e.code;) and return the merged list as
-      &s.code;pScrn-&gt;options&e.code;.  This function requires that
-      &s.code;pScrn-&gt;confScreen&e.code;, &s.code;pScrn-&gt;display&e.code;,
-      &s.code;pScrn-&gt;monitor&e.code;,
-      &s.code;pScrn-&gt;numEntities&e.code;, and
-      &s.code;pScrn-&gt;entityList&e.code; are initialised.
-      &s.code;extraOpts&e.code; may optionally be set to an additional
-      list of options to be combined with the others.  The order of
-      precedence for options is &s.code;extraOpts&e.code;, display,
-      confScreen, monitor, device.
-
-    </quote>
-
-    &s.code;void xf86ProcessOptions(int scrnIndex, pointer options,
-			&f.indent;OptionInfoPtr optinfo)&e.code;
-    <quote><p>
-      Processes a list of options according to the information in the
-      array of &s.code;OptionInfoRecs&e.code; (&s.code;optinfo&e.code;).
-      The resulting information is stored in the &s.code;value&e.code;
-      fields of the appropriate &s.code;optinfo&e.code; entries.  The
-      &s.code;found&e.code; fields are set to &s.code;TRUE&e.code;
-      when an option with a value of the correct type if found, and
-      &s.code;FALSE&e.code; otherwise.  The &s.code;type&e.code; field
-      is used to determine the expected value type for each option.
-      Each option in the list of options for which there is a name match
-      (but not necessarily a value type match) is marked as used.
-      Warning messages are printed when option values don't match the
-      types specified in the optinfo data.
-
-      NOTE: If this function is called before a driver's screen number
-      is known (e.g., from the &s.code;ChipProbe()&e.code; function) a
-      &s.code;scrnIndex&e.code; value of &s.code;-1&e.code; should be
-      used.
-
-      NOTE 2: Given that this function stores into the
-      &s.code;OptionInfoRecs&e.code; pointed to by &s.code;optinfo&e.code,
-      the caller should ensure the &s.code;OptionInfoRecs&e.code; are
-      (re-)initialised before the call, especially if the caller expects
-      to use the predefined option values as defaults.
-
-      The &s.code;OptionInfoRec&e.code; is defined as follows:
-
-      <verb>
-      typedef struct {
-          double freq;
-          int units;
-      } OptFrequency;
-
-      typedef union {
-          unsigned long       num;
-          char *              str;
-          double              realnum;
-          Bool                bool;
-          OptFrequency        freq;
-      } ValueUnion;
-
-      typedef enum {
-          OPTV_NONE = 0,
-          OPTV_INTEGER,
-          OPTV_STRING,  /* a non-empty string */
-          OPTV_ANYSTR,  /* Any string, including an empty one */
-          OPTV_REAL,
-          OPTV_BOOLEAN,
-          OPTV_FREQ
-      } OptionValueType;
-
-      typedef enum {
-          OPTUNITS_HZ = 1,
-          OPTUNITS_KHZ,
-          OPTUNITS_MHZ
-      } OptFreqUnits;
-
-      typedef struct {
-          int                 token;
-          const char*         name;
-          OptionValueType     type;
-          ValueUnion          value;
-          Bool                found;
-      } OptionInfoRec, *OptionInfoPtr;
-      </verb>
-
-      &s.code;OPTV_FREQ&e.code; can be used for options values that are
-      frequencies.  These values are a floating point number with an
-      optional unit name appended.  The unit name can be one of "Hz",
-      "kHz", "k", "MHz", "M".  The multiplier associated with the unit
-      is stored in &s.code;freq.units&e.code;, and the scaled frequency
-      is stored in &s.code;freq.freq&e.code;.  When no unit is specified,
-      &s.code;freq.units&e.code; is set to &s.code;0&e.code;, and
-      &s.code;freq.freq&e.code; is unscaled.
-
-      Typical usage is to setup an array of
-      &s.code;OptionInfoRecs&e.code; with all fields initialised.
-      The &s.code;value&e.code; and &s.code;found&e.code; fields get
-      set by &s.code;xf86ProcessOptions()&e.code;.  For cases where the
-      value parsing is more complex, the driver should specify
-      &s.code;OPTV_STRING&e.code;, and parse the string itself.  An
-      example of using this option handling is included in the
-      <ref id="sample" name="Sample Driver"> section.
-
-    </quote>
-
-    &s.code;void xf86ShowUnusedOptions(int scrnIndex, pointer options)&e.code;
-    <quote><p>
-      Prints out warning messages for each option in the list of options
-      that isn't marked as used.  This is intended to show options that
-      the driver hasn't recognised.  It would normally be called near
-      the end of the &s.code;ChipScreenInit()&e.code; function, but only
-      when &s.code;serverGeneration&nbsp;==&nbsp;1&e.code;.
-
-    </quote>
-
-    &s.code;OptionInfoPtr xf86TokenToOptinfo(const OptionInfoRec *table,
-			&f.indent;int token)&e.code;
-
-    <quote><p>
-      Returns a pointer to the &s.code;OptionInfoRec&e.code; in
-      &s.code;table&e.code; with a token field matching
-      &s.code;token&e.code;.  Returns &s.code;NULL&e.code; if no match
-      is found.
-
-    </quote>
-
-    &s.code;Bool xf86IsOptionSet(const OptionInfoRec *table, int token)&e.code;
-    <quote><p>
-      Returns the &s.code;found&e.code; field of the
-      &s.code;OptionInfoRec&e.code; in &s.code;table&e.code; with a
-      &s.code;token&e.code; field matching &s.code;token&e.code;.  This
-      can be used for options of all types.  Note that for options of
-      type &s.code;OPTV_BOOLEAN&e.code;, it isn't sufficient to check
-      this to determine the value of the option.  Returns
-      &s.code;FALSE&e.code; if no match is found.
-
-    </quote>
-
-    &s.code;char *xf86GetOptValString(const OptionInfoRec *table, int token)&e.code;
-    <quote><p>
-      Returns the &s.code;value.str&e.code; field of the
-      &s.code;OptionInfoRec&e.code; in &s.code;table&e.code; with a
-      token field matching &s.code;token&e.code;.  Returns
-      &s.code;NULL&e.code; if no match is found.
-
-    </quote>
-
-    &s.code;Bool xf86GetOptValInteger(const OptionInfoRec *table, int token,
-			&f.indent;int *value)&e.code;
-    <quote><p>
-      Returns via &s.code;*value&e.code; the &s.code;value.num&e.code;
-      field of the &s.code;OptionInfoRec&e.code; in &s.code;table&e.code;
-      with a &s.code;token&e.code; field matching &s.code;token&e.code;.
-      &s.code;*value&e.code; is only changed when a match is found so
-      it can be safely initialised with a default prior to calling this
-      function.  The function return value is as for
-      &s.code;xf86IsOptionSet()&e.code;.
-
-    </quote>
-
-    &s.code;Bool xf86GetOptValULong(const OptionInfoRec *table, int token,
-			&f.indent;unsigned long *value)&e.code;
-    <quote><p>
-      Like &s.code;xf86GetOptValInteger()&e.code;, except the value is
-      treated as an &s.code;unsigned long&e.code;.
-
-    </quote>
-
-    &s.code;Bool xf86GetOptValReal(const OptionInfoRec *table, int token,
-			&f.indent;double *value)&e.code;
-    <quote><p>
-      Like &s.code;xf86GetOptValInteger()&e.code;, except that
-      &s.code;value.realnum&e.code; is used.
-
-    </quote>
-
-    &s.code;Bool xf86GetOptValFreq(const OptionInfoRec *table, int token,
-			&f.indent;OptFreqUnits expectedUnits, double *value)&e.code;
-    <quote><p>
-      Like &s.code;xf86GetOptValInteger()&e.code;, except that the
-      &s.code;value.freq&e.code; data is returned.  The frequency value
-      is scaled to the units indicated by &s.code;expectedUnits&e.code;.
-      The scaling is exact when the units were specified explicitly in
-      the option's value.  Otherwise, the &s.code;expectedUnits&e.code;
-      field is used as a hint when doing the scaling.  In this case,
-      values larger than &s.code;1000&e.code; are assumed to have be
-      specified in the next smallest units.  For example, if the Option
-      value is "10000" and expectedUnits is &s.code;OPTUNITS_MHZ&e.code;,
-      the value returned is &s.code;10&e.code;.
-
-    </quote>
-
-    &s.code;Bool xf86GetOptValBool(const OptionInfoRec *table, int token, Bool *value)&e.code;
-    <quote><p>
-      This function is used to check boolean options
-      (&s.code;OPTV_BOOLEAN&e.code;).  If the function return value is
-      &s.code;FALSE&e.code;, it means the option wasn't set.  Otherwise
-      &s.code;*value&e.code; is set to the boolean value indicated by
-      the option's value.  No option &s.code;value&e.code; is interpreted
-      as &s.code;TRUE&e.code;.  Option values meaning &s.code;TRUE&e.code;
-      are "1", "yes", "on", "true", and option values meaning
-      &s.code;FALSE&e.code; are "0", "no", "off", "false".  Option names
-      both with the "no" prefix in their names, and with that prefix
-      removed are also checked and handled in the obvious way.
-      &s.code;*value&e.code; is not changed when the option isn't present.
-      It should normally be set to a default value before calling this
-      function.
-
-    </quote>
-
-    &s.code;Bool xf86ReturnOptValBool(const OptionInfoRec *table, int token, Bool def)&e.code;
-    <quote><p>
-      This function is used to check boolean options
-      (&s.code;OPTV_BOOLEAN&e.code;).  If the option is set, its value
-      is returned.  If the options is not set, the default value specified
-      by &s.code;def&e.code; is returned.  The option interpretation is
-      the same as for &s.code;xf86GetOptValBool()&e.code;.
-
-    </quote>
-
-    &s.code;int xf86NameCmp(const char *s1, const char *s2)&e.code;
-    <quote><p>
-      This function should be used when comparing strings from the config
-      file with expected values.  It works like &s.code;strcmp()&e.code;,
-      but is not case sensitive and space, tab, and `<tt>_</tt>' characters
-      are ignored in the comparison.  The use of this function isn't
-      restricted to parsing option values.  It may be used anywhere
-      where this functionality required.
-
-    </quote>
-    </quote>
-
-<sect>Modules, Drivers, Include Files and Interface Issues
-<p>
-
-NOTE: this section is incomplete.
-
-
-<sect1>Include files
-<p>
-
-The following include files are typically required by video drivers:
-
-  <quote><p>
-  All drivers should include these:
-  <quote>
-    &s.code;"xf86.h"&nl;
-    "xf86_OSproc.h"&nl;
-    "xf86_ansic.h"&nl;
-    "xf86Resources.h"&e.code;
-  </quote>
-  Wherever inb/outb (and related things) are used the following should be
-  included:
-  <quote>
-    &s.code;"compiler.h"&e.code;
-  </quote>
-  Note: in drivers, this must be included after &s.code;"xf86_ansic.h"&e.code;.
-
-  Drivers that need to access PCI vendor/device definitions need this:
-  <quote>
-    &s.code;"xf86PciInfo.h"&e.code;
-  </quote>
-
-  Drivers that need to access the PCI config space need this:
-  <quote>
-    &s.code;"xf86Pci.h"&e.code;
-  </quote>
-
-  Drivers that initialise a SW cursor need this:
-  <quote>
-    &s.code;"mipointer.h"&e.code;
-  </quote>
-
-  All drivers implementing backing store need this:
-  <quote>
-    &s.code;"mibstore.h"&e.code;
-  </quote>
-
-  All drivers using the mi colourmap code need this:
-  <quote>
-    &s.code;"micmap.h"&e.code;
-  </quote>
-
-  If a driver uses the vgahw module, it needs this:
-  <quote>
-    &s.code;"vgaHW.h"&e.code;
-  </quote>
-
-  Drivers supporting VGA or Hercules monochrome screens need:
-  <quote>
-    &s.code;"xf1bpp.h"&e.code;
-  </quote>
-
-  Drivers supporting VGA or EGC 16-colour screens need:
-  <quote>
-    &s.code;"xf4bpp.h"&e.code;
-  </quote>
-
-  Drivers using cfb need:
-  <quote>
-    &s.code;#define PSZ 8&nl;
-    #include "cfb.h"&nl;
-    #undef PSZ&e.code;
-  </quote>
-
-  Drivers supporting bpp 16, 24 or 32 with cfb need one or more of:
-  <quote>
-    &s.code;"cfb16.h"&nl;
-    "cfb24.h"&nl;
-    "cfb32.h"&e.code;
-  </quote>
-
-  If a driver uses XAA, it needs these:
-  <quote>
-    &s.code;"xaa.h"&nl;
-    "xaalocal.h"&e.code;
-  </quote>
-
-  If a driver uses the fb manager, it needs this:
-  <quote>
-    &s.code;"xf86fbman.h"&e.code;
-  </quote>
-  </quote>
-
-Non-driver modules should include &s.code;"xf86_ansic.h"&e.code; to get the correct
-wrapping of ANSI C/libc functions.
-
-All modules must NOT include any system include files, or the following:
-
- <quote>
-    &s.code;"xf86Priv.h"&nl;
-    "xf86Privstr.h"&nl;
-    "xf86_OSlib.h"&nl;
-    "Xos.h"&e.code;
- </quote>
-
-In addition, "xf86_libc.h" must not be included explicitly.  It is
-included implicitly by "xf86_ansic.h".
-
-
-<sect>Offscreen Memory Manager
-<p>
-
-Management of offscreen video memory may be handled by the XFree86
-framebuffer manager.  Once the offscreen memory manager is running,
-drivers or extensions may allocate, free or resize areas of offscreen
-video memory using the following functions (definitions taken from
-&s.code;xf86fbman.h&e.code;):
-
-<code>
-    typedef struct _FBArea {
-        ScreenPtr    pScreen;
-        BoxRec       box;
-        int          granularity;
-        void         (*MoveAreaCallback)(struct _FBArea*, struct _FBArea*)
-        void         (*RemoveAreaCallback)(struct _FBArea*)
-        DevUnion     devPrivate;
-    } FBArea, *FBAreaPtr;
-
-    typedef void (*MoveAreaCallbackProcPtr)(FBAreaPtr from, FBAreaPtr to)
-    typedef void (*RemoveAreaCallbackProcPtr)(FBAreaPtr)
-
-    FBAreaPtr xf86AllocateOffscreenArea (
-        ScreenPtr pScreen,
-        int width, int height,
-        int granularity,
-        MoveAreaCallbackProcPtr MoveAreaCallback,
-        RemoveAreaCallbackProcPtr RemoveAreaCallback,
-        pointer privData
-    )
-
-    void xf86FreeOffscreenArea (FBAreaPtr area)
-
-    Bool xf86ResizeOffscreenArea (
-	FBAreaPtr area
-	int w, int h
-    )
-</code>
-
-The function:
-<quote>
-    &s.code;Bool xf86FBManagerRunning(ScreenPtr pScreen)&e.code;
-</quote>
-
-can be used by an extension to check if the driver has initialized
-the memory manager.  The manager is not available if this returns
-&s.code;FALSE&e.code; and the functions above will all fail.
-
-
-&s.code;xf86AllocateOffscreenArea()&e.code; can be used to request a
-rectangle of dimensions &s.code;width&e.code; x &s.code;height&e.code;
-(in pixels) from unused offscreen memory.  &s.code;granularity&e.code;
-specifies that the leftmost edge of the rectangle must lie on some
-multiple of &s.code;granularity&e.code; pixels.  A granularity of zero
-means the same thing as a granularity of one - no alignment preference.
-A &s.code;MoveAreaCallback&e.code; can be provided to notify the requester
-when the offscreen area is moved.  If no &s.code;MoveAreaCallback&e.code;
-is supplied then the area is considered to be immovable.  The
-&s.code;privData&e.code; field will be stored in the manager's internal
-structure for that allocated area and will be returned to the requester
-in the &s.code;FBArea&e.code; passed via the
-&s.code;MoveAreaCallback&e.code;.  An optional
-&s.code;RemoveAreaCallback&e.code; is provided.  If the driver provides
-this it indicates that the area should be allocated with a lower priority.
-Such an area may be removed when a higher priority request (one that
-doesn't have a &s.code;RemoveAreaCallback&e.code;) is made.  When this
-function is called, the driver will have an opportunity to do whatever
-cleanup it needs to do to deal with the loss of the area, but it must
-finish its cleanup before the function exits since the offscreen memory
-manager will free the area immediately after.
-
-&s.code;xf86AllocateOffscreenArea()&e.code; returns &s.code;NULL&e.code;
-if it was unable to allocate the requested area.  When no longer needed,
-areas should be freed with &s.code;xf86FreeOffscreenArea()&e.code;.
-
-&s.code;xf86ResizeOffscreenArea()&e.code; resizes an existing
-&s.code;FBArea&e.code;.  &s.code;xf86ResizeOffscreenArea()&e.code;
-returns &s.code;TRUE&e.code; if the resize was successful.  If
-&s.code;xf86ResizeOffscreenArea()&e.code; returns &s.code;FALSE&e.code;,
-the original &s.code;FBArea&e.code; is left unmodified.  Resizing an
-area maintains the area's original &s.code;granularity&e.code;,
-&s.code;devPrivate&e.code;, and &s.code;MoveAreaCallback&e.code;.
-&s.code;xf86ResizeOffscreenArea()&e.code; has considerably less overhead
-than freeing the old area then reallocating the new size, so it should
-be used whenever possible.
-
-The function:
-  <quote>
-   &s.code;Bool xf86QueryLargestOffscreenArea(
-     &f.indent;ScreenPtr pScreen,
-     &f.indent;int *width, int *height,
-     &f.indent;int granularity,
-     &f.indent;int preferences,
-     &f.indent;int priority
-   &nl)&e.code;
-  </quote>
-
-is provided to query the width and height of the largest single
-&s.code;FBArea&e.code; allocatable given a particular priority.
-&s.code;preferences&e.code; can be one of the following to indicate
-whether width, height or area should be considered when determining
-which is the largest single &s.code;FBArea&e.code; available.
-
-  <quote>
-  &s.code;FAVOR_AREA_THEN_WIDTH&nl;
-  FAVOR_AREA_THEN_HEIGHT&nl;
-  FAVOR_WIDTH_THEN_AREA&nl;
-  FAVOR_HEIGHT_THEN_AREA&e.code;
-  </quote>
-
-&s.code;priority&e.code; is one of the following:
-
-  <quote><p>
-  &s.code;PRIORITY_LOW&e.code;
-  <quote><p>
-     Return the largest block available without stealing anyone else's
-     space.  This corresponds to the priority of allocating a
-     &s.code;FBArea&e.code; when a &s.code;RemoveAreaCallback&e.code;
-     is provided.
-
-  </quote>
-  &s.code;PRIORITY_NORMAL&e.code;
-  <quote><p>
-     Return the largest block available if it is acceptable to steal a
-     lower priority area from someone.  This corresponds to the priority
-     of allocating a &s.code;FBArea&e.code; without providing a
-     &s.code;RemoveAreaCallback&e.code;.
-
-  </quote>
-  &s.code;PRIORITY_EXTREME&e.code;
-  <quote><p>
-     Return the largest block available if all &s.code;FBAreas&e.code;
-     that aren't locked down were expunged from memory first.  This
-     corresponds to any allocation made directly after a call to
-     &s.code;xf86PurgeUnlockedOffscreenAreas()&e.code;.
-
-  </quote>
-  </quote>
-
-
-The function:
-
-  <quote>
-    &s.code;Bool xf86PurgeUnlockedOffscreenAreas(ScreenPtr pScreen)&e.code;
-  </quote>
-
-is provided as an extreme method to free up offscreen memory.  This
-will remove all removable &s.code;FBArea&e.code; allocations.
-
-
-Initialization of the XFree86 framebuffer manager is done via
-
-  <quote>
-    &s.code;Bool xf86InitFBManager(ScreenPtr pScreen, BoxPtr FullBox)&e.code;
-  </quote>
-
-&s.code;FullBox&e.code; represents the area of the framebuffer that the
-manager is allowed to manage.  This is typically a box with a width of
-&s.code;pScrn-&gt;displayWidth&e.code; and a height of as many lines as
-can be fit within the total video memory, however, the driver can reserve
-areas at the extremities by passing a smaller area to the manager.
-
-&s.code;xf86InitFBManager()&e.code; must be called before XAA is
-initialized since XAA uses the manager for it's pixmap cache.
-
-An alternative function is provided to allow the driver to initialize
-the framebuffer manager with a Region rather than a box.
-
-  <quote>
-   &s.code;Bool xf86InitFBManagerRegion(ScreenPtr pScreen,
-	&f.indent;RegionPtr FullRegion)&e.code;
-  </quote>
-
-&s.code;xf86InitFBManagerRegion()&e.code;, unlike
-&s.code;xf86InitFBManager()&e.code;, does not remove the area used for
-the visible screen so that area should not be included in the region
-passed to the function.  &s.code;xf86InitFBManagerRegion()&e.code; is
-useful when non-contiguous areas are available to be managed, and is
-required when multiple framebuffers are stored in video memory (as in
-the case where an overlay of a different depth is stored as a second
-framebuffer in offscreen memory).
-
-
-<sect>Colormap Handling<label id="cmap">
-<p>
-
-A generic colormap handling layer is provided within the XFree86 common
-layer.  This layer takes care of most of the details, and only requires
-a function from the driver that loads the hardware palette when required.
-To use the colormap layer, a driver calls the
-&s.code;xf86HandleColormaps()&e.code; function.
-
-    <quote><p>
-    &s.code;Bool xf86HandleColormaps(ScreenPtr pScreen, int maxColors,
-		&f.indent;int sigRGBbits, LoadPaletteFuncPtr loadPalette,
-		&f.indent;SetOverscanFuncPtr setOverscan,
-		unsigned int flags)&e.code;
-    <quote><p>
-      This function must be called after the default colormap has been
-      initialised.  The &s.code;pScrn-&gt;gamma&e.code; field must also
-      be initialised, preferably by calling &s.code;xf86SetGamma()&e.code;.
-      &s.code;maxColors&e.code; is the number of entries in the palette.
-      &s.code;sigRGBbits&e.code; is the size in bits of each color
-      component in the DAC's palette.  &s.code;loadPalette&e.code;
-      is a driver-provided function for loading a colormap into the
-      hardware, and is described below.  &s.code;setOverscan&e.code; is
-      an optional function that may be provided when the overscan color
-      is an index from the standard LUT and when it needs to be adjusted
-      to keep it as close to black as possible.  The
-      &s.code;setOverscan&e.code; function programs the overscan index.
-      It shouldn't normally be used for depths other than 8.
-      &s.code;setOverscan&e.code; should be set to &s.code;NULL&e.code;
-      when it isn't needed.  &s.code;flags&e.code; may be set to the
-      following (which may be ORed together):
-
-      &s.code;CMAP_PALETTED_TRUECOLOR&e.code;
-      <quote><p>
-				    the TrueColor visual is paletted and is
-				    just a special case of DirectColor.
-				    This flag is only valid for
-				    &s.code;bpp&nbsp;&gt;&nbsp;8&e.code;.
-
-      </quote>
-
-      &s.code;CMAP_RELOAD_ON_MODE_SWITCH&e.code;
-      <quote><p>
-				    reload the colormap automatically
-                                    after mode switches.  This is useful
-                                    for when the driver is resetting the
-                                    hardware during mode switches and
-                                    corrupting or erasing the hardware
-                                    palette.
-
-      </quote>
-
-      &s.code;CMAP_LOAD_EVEN_IF_OFFSCREEN&e.code;
-      <quote><p>
-				    reload the colormap even if the screen
-				    is switched out of the server's VC.
-				    The palette is <it>not</it> reloaded when
-				    the screen is switched back in, nor after
-				    mode switches.  This is useful when the
-				    driver needs to keep track of palette
-				    changes.
-
-      </quote>
-
-      The colormap layer normally reloads the palette after VT enters so it
-      is not necessary for the driver to save and restore the palette
-      when switching VTs.  The driver must, however, still save the
-      initial palette during server start up and restore it during
-      server exit.
-
-    </quote>
-
-    &s.code;void LoadPalette(ScrnInfoPtr pScrn, int numColors, int *indices,
-		&f.indent;LOCO *colors, VisualPtr pVisual)&e.code;
-    <quote><p>
-      &s.code;LoadPalette()&e.code; is a driver-provided function for
-      loading a colormap into hardware.  &s.code;colors&e.code; is the
-      array of RGB values that represent the full colormap.
-      &s.code;indices&e.code; is a list of index values into the colors
-      array.  These indices indicate the entries that need to be updated.
-      &s.code;numColors&e.code; is the number of the indices to be
-      updated.
-
-    </quote>
-
-    &s.code;void SetOverscan(ScrnInfoPtr pScrn, int overscan)&e.code;
-    <quote><p>
-      &s.code;SetOverscan()&e.code; is a driver-provided function for
-      programming the &s.code;overscan&e.code; index.  As described
-      above, it is normally only appropriate for LUT modes where all
-      colormap entries are available for the display, but where one of
-      them is also used for the overscan (typically 8bpp for VGA compatible
-      LUTs).  It isn't required in cases where the overscan area is
-      never visible.
-
-    </quote>
-    </quote>
-
-
-<sect>DPMS Extension
-<p>
-
-Support code for the DPMS extension is included in the XFree86 common layer.
-This code provides an interface between the main extension code, and a means
-for drivers to initialise DPMS when they support it.  One function is
-available to drivers to do this initialisation, and it is always available,
-even when the DPMS extension is not supported by the core server (in
-which case it returns a failure result).
-
-
-    <quote><p>
-    &s.code;Bool xf86DPMSInit(ScreenPtr pScreen, DPMSSetProcPtr set, int flags)&e.code;
-    <quote><p>
-      This function registers a driver's DPMS level programming function
-      &s.code;set&e.code;.  It also checks
-      &s.code;pScrn-&gt;options&e.code; for the "dpms" option, and when
-      present marks DPMS as being enabled for that screen.  The
-      &s.code;set&e.code; function is called whenever the DPMS level
-      changes, and is used to program the requested level.
-      &s.code;flags&e.code; is currently not used, and should be
-      &s.code;0&e.code;.  If the initialisation fails for any reason,
-      including when there is no DPMS support in the core server, the
-      function returns &s.code;FALSE&e.code;.
-
-    </quote>
-    </quote>
-
-
-Drivers that implement DPMS support must provide the following function,
-that gets called when the DPMS level is changed:
-
-
-    <quote><p>
-    &s.code;void ChipDPMSSet(ScrnInfoPtr pScrn, int level, int flags)&e.code;
-    <quote><p>
-      Program the DPMS level specified by &s.code;level&e.code;.  Valid
-      values of &s.code;level&e.code; are &s.code;DPMSModeOn&e.code;,
-      &s.code;DPMSModeStandby&e.code;, &s.code;DPMSModeSuspend&e.code;,
-      &s.code;DPMSModeOff&e.code;.  These values are defined in
-      &s.code;"extensions/dpms.h"&e.code;.
-
-    </quote>
-    </quote>
-
-
-<sect>DGA Extension
-<p>
-
-Drivers can support the XFree86 Direct Graphics Architecture (DGA) by
-filling out a structure of function pointers and a list of modes and
-passing them to DGAInit.
-
-    <quote><p>
-    &s.code;Bool DGAInit(ScreenPtr pScreen, DGAFunctionPtr funcs,
-			&f.indent;DGAModePtr modes, int num)&e.code;
-    <quote><p>
-    <verb>
-/** The DGAModeRec **/
-
-typedef struct {
-  int num;
-  DisplayModePtr mode;
-  int flags;
-  int imageWidth;
-  int imageHeight;
-  int pixmapWidth;
-  int pixmapHeight;
-  int bytesPerScanline;
-  int byteOrder;
-  int depth;
-  int bitsPerPixel;
-  unsigned long red_mask;
-  unsigned long green_mask;
-  unsigned long blue_mask;
-  int viewportWidth;
-  int viewportHeight;
-  int xViewportStep;
-  int yViewportStep;
-  int maxViewportX;
-  int maxViewportY;
-  int viewportFlags;
-  int offset;
-  unsigned char *address;
-  int reserved1;
-  int reserved2;
-} DGAModeRec, *DGAModePtr;
-</verb>
-
-      &s.code;num&e.code;
-	<quote>
-	 Can be ignored.  The DGA DDX will assign these numbers.
-	</quote>
-
-      &s.code;mode&e.code;
-	<quote>
-	A pointer to the &s.code;DisplayModeRec&e.code; for this mode.
-	</quote>
-
-      &s.code;flags&e.code;
-	<quote><p>
-	The following flags are defined and may be OR'd together:
-
-        &s.code;DGA_CONCURRENT_ACCESS&e.code;
-	    <quote><p>
-            Indicates that the driver supports concurrent graphics
-            accelerator and linear framebuffer access.
-
-	    </quote>
-
-        &s.code;DGA_FILL_RECT&nl;
-	DGA_BLIT_RECT&nl;
-        DGA_BLIT_RECT_TRANS&e.code;
-	    <quote><p>
-	    Indicates that the driver supports the FillRect, BlitRect
-            or BlitTransRect functions in this mode.
-
-	    </quote>
-
-        &s.code;DGA_PIXMAP_AVAILABLE&e.code;
-	    <quote><p>
-	    Indicates that Xlib may be used on the framebuffer.
-            This flag will usually be set unless the driver wishes
-            to prohibit this for some reason.
-
-	    </quote>
-
-        &s.code;DGA_INTERLACED&nl;
-        DGA_DOUBLESCAN&e.code;
-	    <quote><p>
-            Indicates that these are interlaced or double scan modes.
-
-	    </quote>
-	</quote>
-
-      &s.code;imageWidth&nl;
-      imageHeight&e.code;
-	<quote><p>
-		    These are the dimensions of the linear framebuffer
-                     accessible by the client.
-
-	</quote>
-
-      &s.code;pixmapWidth&nl;
-      pixmapHeight&e.code;
-	<quote><p>
-		     These are the dimensions of the area of the
-                     framebuffer accessible by the graphics accelerator.
-
-	</quote>
-
-      &s.code;bytesPerScanline&e.code;
-	<quote><p>
-		      Pitch of the framebuffer in bytes.
-
-	</quote>
-
-      &s.code;byteOrder&e.code;
-	<quote><p>
-		     Usually the same as
-		     &s.code;pScrn-&gt;imageByteOrder&e.code;.
-
-	</quote>
-
-      &s.code;depth&e.code;
-	<quote><p>
-		     The depth of the framebuffer in this mode.
-
-	</quote>
-
-      &s.code;bitsPerPixel&e.code;
-	<quote><p>
-		      The number of bits per pixel in this mode.
-
-	</quote>
-
-      &s.code;red_mask&nl;
-      green_mask&nl;
-      blue_mask&e.code;
-	<quote><p>
-		      The RGB masks for this mode, if applicable.
-
-	</quote>
-
-      &s.code;viewportWidth&nl;
-      viewportHeight&e.code;
-	<quote><p>
-		      Dimensions of the visible part of the framebuffer.
-		      Usually &s.code;mode-&gt;HDisplay&e.code; and
-		      &s.code;mode-&gt;VDisplay&e.code;.
-
-	</quote>
-
-      &s.code;xViewportStep&nl;
-      yViewportStep&e.code;
-	<quote><p>
-		     The granularity of x and y viewport positions that
-                     the driver supports in this mode.
-
-	</quote>
-
-      &s.code;maxViewportX&nl;
-      maxViewportY&e.code;
-	<quote><p>
-		      The maximum viewport position supported by the
-                       driver in this mode.
-
-	</quote>
-
-      &s.code;viewportFlags&e.code;
-	<quote><p>
-		     The following may be OR'd together:
-
-       &s.code;DGA_FLIP_IMMEDIATE&e.code;
-	    <quote><p>
-		The driver supports immediate viewport changes.
-
-	    </quote>
-       &s.code;DGA_FLIP_RETRACE&e.code;
-	    <quote<p>
-		The driver supports viewport changes at retrace.
-
-	    </quote>
-	</quote>
-
-      &s.code;offset&e.code;
-	<quote><p>
-	        The offset into the linear framebuffer that corresponds to
-                pixel (0,0) for this mode.
-
-	</quote>
-
-      &s.code;address&e.code;
-        <quote><p>
-                The virtual address of the framebuffer as mapped by the driver.
-                This is needed when DGA_PIXMAP_AVAILABLE is set.
-
-        </quote>
-
-      <verb>
-/** The DGAFunctionRec **/
-
-typedef struct {
-  Bool (*OpenFramebuffer)(
-       ScrnInfoPtr pScrn,
-       char **name,
-       unsigned char **mem,
-       int *size,
-       int *offset,
-       int *extra
-  );
-  void (*CloseFramebuffer)(ScrnInfoPtr pScrn);
-  Bool (*SetMode)(ScrnInfoPtr pScrn, DGAModePtr pMode);
-  void (*SetViewport)(ScrnInfoPtr pScrn, int x, int y, int flags);
-  int  (*GetViewport)(ScrnInfoPtr pScrn);
-  void (*Sync)(ScrnInfoPtr);
-  void (*FillRect)(
-       ScrnInfoPtr pScrn,
-       int x, int y, int w, int h,
-       unsigned long color
-  );
-  void (*BlitRect)(
-       ScrnInfoPtr pScrn,
-       int srcx, int srcy,
-       int w, int h,
-       int dstx, int dsty
-  );
-  void (*BlitTransRect)(
-       ScrnInfoPtr pScrn,
-       int srcx, int srcy,
-       int w, int h,
-       int dstx, int dsty,
-       unsigned long color
-  );
-} DGAFunctionRec, *DGAFunctionPtr;
-</verb>
-
-    </quote>
-
-    &s.code;Bool OpenFramebuffer (pScrn, name, mem, size, offset, extra)&e.code;
-    <quote><p>
-      &s.code;OpenFramebuffer()&e.code; should pass the client everything
-      it needs to know to be able to open the framebuffer.  These
-      parameters are OS specific and their meanings are to be interpreted
-      by an OS specific client library.
-
-      &s.code;name&e.code;
-	<quote><p>
-	      The name of the device to open or &s.code;NULL&e.code; if
-	      there is no special device to open.  A &s.code;NULL&e.code;
-	      name tells the client that it should open whatever device
-	      one would usually open to access physical memory.
-
-	</quote>
-      &s.code;mem&e.code;
-	<quote><p>
-	       The physical address of the start of the framebuffer.
-
-	</quote>
-      &s.code;size&e.code;
-	<quote><p>
-	      The size of the framebuffer in bytes.
-
-	</quote>
-      &s.code;offset&e.code;
-	<quote><p>
-	      Any offset into the device, if applicable.
-
-	</quote>
-      &s.code;flags&e.code;
-	<quote><p>
-	      Any additional information that the client may need.
-	      Currently, only the &s.code;DGA_NEED_ROOT&e.code; flag is
-	      defined.
-
-	</quote>
-   </quote>
-
-    &s.code;void CloseFramebuffer (pScrn)&e.code;
-    <quote><p>
-      &s.code;CloseFramebuffer()&e.code; merely informs the driver (if it
-      even cares) that client no longer needs to access the framebuffer
-      directly.  This function is optional.
-
-    </quote>
-
-    &s.code;Bool SetMode (pScrn, pMode)&e.code;
-    <quote><p>
-      &s.code;SetMode()&e.code; tells the driver to initialize the mode
-      passed to it.  If &s.code;pMode&e.code; is &s.code;NULL&e.code;,
-      then the driver should restore the original pre-DGA mode.
-
-    </quote>
-
-    &s.code;void SetViewport (pScrn, x, y, flags)&e.code;
-    <quote><p>
-      &s.code;SetViewport()&e.code; tells the driver to make the upper
-      left-hand corner of the visible screen correspond to coordinate
-      &s.code;(x,y)&e.code; on the framebuffer.  &s.code;Flags&e.code;
-      currently defined are:
-
-       &s.code;DGA_FLIP_IMMEDIATE&e.code;
-	<quote><p>
-	    The viewport change should occur immediately.
-
-	</quote>
-       &s.code;DGA_FLIP_RETRACE&e.code;
-	<quote><p>
-	    The viewport change should occur at the
-            vertical retrace, but this function should
-            return sooner if possible.
-
-	</quote>
-      The &s.code;(x,y)&e.code; locations will be passed as the client
-      specified them, however, the driver is expected to round these
-      locations down to the next supported location as specified by the
-      &s.code;xViewportStep&e.code; and &s.code;yViewportStep&e.code;
-      for the current mode.
-
-    </quote>
-
-    &s.code;int GetViewport (pScrn)&e.code;
-    <quote><p>
-      &s.code;GetViewport()&e.code; gets the current page flip status.
-      Set bits in the returned int correspond to viewport change requests
-      still pending.  For instance, set bit zero if the last SetViewport
-      request is still pending, bit one if the one before that is still
-      pending, etc.
-
-    </quote>
-
-    &s.code;void Sync (pScrn)&e.code;
-    <quote><p>
-      This function should ensure that any graphics accelerator operations
-      have finished.  This function should not return until the graphics
-      accelerator is idle.
-
-    </quote>
-
-    &s.code;void FillRect (pScrn, x, y, w, h, color)&e.code;
-    <quote><p>
-      This optional function should fill a rectangle
-      &s.code;w&nbsp;&times;&nbsp;h&e.code; located at
-      &s.code;(x,y)&e.code; in the given color.
-
-    </quote>
-
-    &s.code;void BlitRect (pScrn, srcx, srcy, w, h, dstx, dsty)&e.code;
-    <quote><p>
-      This optional function should copy an area
-      &s.code;w&nbsp;&times;&nbsp;h&e.code; located at
-      &s.code;(srcx,srcy)&e.code; to location &s.code;(dstx,dsty)&e.code;.
-      This function will need to handle copy directions as appropriate.
-
-    </quote>
-
-    &s.code;void BlitTransRect (pScrn, srcx, srcy, w, h, dstx, dsty, color)&e.code;
-    <quote><p>
-      This optional function is the same as BlitRect except that pixels
-      in the source corresponding to the color key &s.code;color&e.code;
-      should be skipped.
-
-    </quote>
-    </quote>
-
-<sect>The XFree86 X Video Extension (Xv) Device Dependent Layer
-<p>
-
-XFree86 offers the X Video Extension which allows clients to treat video
-as any another primitive and ``Put'' video into drawables.  By default,
-the extension reports no video adaptors as being available since the
-DDX layer has not been initialized.  The driver can initialize the DDX
-layer by filling out one or more &s.code;XF86VideoAdaptorRecs&e.code;
-as described later in this document and passing a list of
-&s.code;XF86VideoAdaptorPtr&e.code; pointers to the following function:
-
-  <quote>
-  &s.code;Bool xf86XVScreenInit(
-	&f.indent;ScreenPtr pScreen,
-	&f.indent;XF86VideoAdaptorPtr *adaptPtrs,
-	&f.indent;int num)&e.code;
-  </quote>
-
-After doing this, the extension will report video adaptors as being
-available, providing the data in their respective
-&s.code;XF86VideoAdaptorRecs&e.code; was valid.
-&s.code;xf86XVScreenInit()&e.code; <em>copies</em> data from the structure
-passed to it so the driver may free it after the initialization.  At
-the moment, the DDX only supports rendering into Window drawables.
-Pixmap rendering will be supported after a sufficient survey of suitable
-hardware is completed.
-
-The &s.code;XF86VideoAdaptorRec&e.code;:
-
-<quote><p>
-<verb>
-typedef struct {
-	unsigned int type;
-	int flags;
-	char *name;
-	int nEncodings;
-	XF86VideoEncodingPtr pEncodings;
-	int nFormats;
-	XF86VideoFormatPtr pFormats;
-	int nPorts;
-	DevUnion *pPortPrivates;
-	int nAttributes;
-	XF86AttributePtr pAttributes;
-	int nImages;
-	XF86ImagePtr pImages;
-	PutVideoFuncPtr PutVideo;
-	PutStillFuncPtr PutStill;
-	GetVideoFuncPtr GetVideo;
-	GetStillFuncPtr GetStill;
-	StopVideoFuncPtr StopVideo;
-	SetPortAttributeFuncPtr SetPortAttribute;
-	GetPortAttributeFuncPtr GetPortAttribute;
-	QueryBestSizeFuncPtr QueryBestSize;
-	PutImageFuncPtr PutImage;
-	QueryImageAttributesFuncPtr QueryImageAttributes;
-} XF86VideoAdaptorRec, *XF86VideoAdaptorPtr;
-</verb>
-
-   Each adaptor will have its own XF86VideoAdaptorRec.  The fields are
-   as follows:
-
-     &s.code;type&e.code;
-     <quote><p>
-	This can be any of the following flags OR'd together.
-
-	&s.code;XvInputMask&e.code;
-	&s.code;XvOutputMask&e.code;
-	<quote><p>
-	    These refer to the target drawable and are similar to a Window's
-	    class. &s.code;XvInputMask&e.code; indicates that the adaptor
-	    can put video into a drawable.  &s.code;XvOutputMask&e.code;
-	    indicates that the adaptor can get video from a drawable.
-	</quote>
-
-	&s.code;XvVideoMask&e.code;
-	&s.code;XvStillMask&e.code;
-	&s.code;XvImageMask&e.code;
-	<quote><p>
-	    These indicate that the adaptor supports video, still or
-	    image primitives respectively.
-	</quote>
-
-	&s.code;XvWindowMask&e.code;
-	&s.code;XvPixmapMask&e.code;
-	<quote><p>
-	    These indicate the types of drawables the adaptor is capable
-	    of rendering into.  At the moment, Pixmap rendering is not
-	    supported and the &s.code;XvPixmapMask&e.code; flag is ignored.
-	</quote>
-
-     </quote>
-
-     &s.code;flags&e.code;
-     <quote><p>
-	Currently, the following flags are defined:
-
-	&s.code;VIDEO_NO_CLIPPING&e.code;
-	<quote><p>
-	   This indicates that the video adaptor does not support
-	   clipping.  The driver will never receive ``Put'' requests
-	   where less than the entire area determined by
-	   &s.code;drw_x&e.code;, &s.code;drw_y&e.code;,
-	   &s.code;drw_w&e.code; and &s.code;drw_h&e.code; is visible.
-	   This flag does not apply to ``Get'' requests.  Hardware
-	   that is incapable of clipping ``Gets'' may punt or get
-	   the extents of the clipping region passed to it.
-
-	</quote>
-
-	&s.code;VIDEO_INVERT_CLIPLIST&e.code;
-	<quote><p>
-	   This indicates that the video driver requires the clip
-	   list to contain the regions which are obscured rather
-	   than the regions which are are visible.
-
-	</quote>
-
-	&s.code;VIDEO_OVERLAID_STILLS&e.code;
-	<quote><p>
-	   Implementing PutStill for hardware that does video as an
-	   overlay can be awkward since it's unclear how long to leave
-	   the video up for.  When this flag is set, StopVideo will be
-	   called whenever the destination gets clipped or moved so that
-	   the still can be left up until then.
-
-	</quote>
-
-	&s.code;VIDEO_OVERLAID_IMAGES&e.code;
-	<quote><p>
-	    Same as &s.code;VIDEO_OVERLAID_STILLS&e.code; but for images.
-	</quote>
-
-	&s.code;VIDEO_CLIP_TO_VIEWPORT&e.code;
-	<quote><p>
-	    Indicates that the clip region passed to the driver functions
-	    should be clipped to the visible portion of the screen in the
-	    case where the viewport is smaller than the virtual desktop.
-	</quote>
-
-     </quote>
-
-     &s.code;name&e.code;
-     <quote><p>
-	The name of the adaptor.
-
-     </quote>
-
-     &s.code;nEncodings&nl;
-     pEncodings&e.code;
-     <quote><p>
-	The number of encodings the adaptor is capable of and pointer
-	to the &s.code;XF86VideoEncodingRec&e.code; array.  The
-	&s.code;XF86VideoEncodingRec&e.code; is described later on.
-	For drivers that only support XvImages there should be an encoding
-	named "XV_IMAGE" and the width and height should specify
-	the maximum size source image supported.
-
-     </quote>
-
-     &s.code;nFormats&nl;
-     pFormats&e.code;
-     <quote><p>
-	The number of formats the adaptor is capable of and pointer to
-	the &s.code;XF86VideoFormatRec&e.code; array.  The
-	&s.code;XF86VideoFormatRec&e.code; is described later on.
-
-     </quote>
-
-     &s.code;nPorts&nl;
-     pPortPrivates&e.code;
-     <quote><p>
-	The number of ports is the number of separate data streams which
-	the adaptor can handle simultaneously.  If you have more than
-	one port, the adaptor is expected to be able to render into more
-	than one window at a time.  &s.code;pPortPrivates&e.code; is
-	an array of pointers or ints - one for each port.  A port's
-	private data will be passed to the driver any time the port is
-	requested to do something like put the video or stop the video.
-	In the case where there may be many ports, this enables the
-	driver to know which port the request is intended for.  Most
-	commonly, this will contain a pointer to the data structure
-	containing information about the port.  In Xv, all ports on
-	a particular adaptor are expected to be identical in their
-	functionality.
-
-     </quote>
-
-     &s.code;nAttributes&nl;
-     pAttributes&e.code;
-     <quote><p>
-	The number of attributes recognized by the adaptor and a pointer to
-	the array of &s.code;XF86AttributeRecs&e.code;.  The
-	&s.code;XF86AttributeRec&e.code; is described later on.
-
-     </quote>
-
-     &s.code;nImages&nl;
-     pImages&e.code;
-     <quote><p>
-	The number of &s.code;XF86ImageRecs&e.code; supported by the adaptor
-	and a pointer to the array of &s.code;XF86ImageRecs&e.code;. The
-	&s.code;XF86ImageRec&e.code; is described later on.
-
-     </quote>
-
-
-     &s.code;PutVideo PutStill GetVideo GetStill StopVideo
-     SetPortAttribute GetPortAttribute QueryBestSize PutImage
-     QueryImageAttributes&e.code;
-     <quote><p>
-	These functions define the DDX-&gt;driver interface.  In each
-	case, the pointer &s.code;data&e.code; is passed to the driver.
-	This is the port private for that port as described above.  All
-	fields are required except under the following conditions:
-
-	<enum>
-	 <item>&s.code;PutVideo&e.code;, &s.code;PutStill&e.code; and
-	     the image routines &s.code;PutImage&e.code; and
-	     &s.code;QueryImageAttributes&e.code; are not required when the
-	     adaptor type does not contain &s.code;XvInputMask&e.code;.
-
-	 <item>&s.code;GetVideo&e.code; and &s.code;GetStill&e.code;
-	     are not required when the adaptor type does not contain
-	     &s.code;XvOutputMask&e.code;.
-
-	 <item>&s.code;GetVideo&e.code; and &s.code;PutVideo&e.code;
-	     are not required when the adaptor type does not contain
-	     &s.code;XvVideoMask&e.code;.
-
-	 <item>&s.code;GetStill&e.code; and &s.code;PutStill&e.code;
-	     are not required when the adaptor type does not contain
-	     &s.code;XvStillMask&e.code;.
-
-	 <item>&s.code;PutImage&e.code; and &s.code;QueryImageAttributes&e.code;
-	     are not required when the adaptor type does not contain
-	     &s.code;XvImageMask&e.code;.
-
-	</enum>
-
-	With the exception of &s.code;QueryImageAttributes&e.code;, these
-	functions should return &s.code;Success&e.code; if the operation was
-	completed successfully.  They can return &s.code;XvBadAlloc&e.code;
-	otherwise. &s.code;QueryImageAttributes&e.code; returns the size
-	of the XvImage queried.
-
-	If the &s.code;VIDEO_NO_CLIPPING&e.code;
-	flag is set, the &s.code;clipBoxes&e.code; may be ignored by
-	the driver.  &s.code;ClipBoxes&e.code; is an &s.code;X-Y&e.code;
-	banded region identical to those used throughout the server.
-	The clipBoxes represent the visible portions of the area determined
-	by &s.code;drw_x&e.code;, &s.code;drw_y&e.code;,
-	&s.code;drw_w&e.code; and &s.code;drw_h&e.code; in the Get/Put
-	function.  The boxes are in screen coordinates, are guaranteed
-	not to overlap and an empty region will never be passed.
-	If the driver has specified &s.code;VIDEO_INVERT_CLIPLIST&e.code;,
-	&s.code;clipBoxes&e.code; will indicate the areas of the primitive
-	which are obscured rather than the areas visible.
-
-    </quote>
-
-	&s.code;typedef  int (* PutVideoFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,
-		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,
-		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;
-    <quote><p>
-	  This indicates that the driver should take a subsection
-	  &s.code;vid_w&e.code; by &s.code;vid_h&e.code; at location
-	  &s.code;(vid_x,vid_y)&e.code; from the video stream and direct
-	  it into the rectangle &s.code;drw_w&e.code; by &s.code;drw_h&e.code;
-	  at location &s.code;(drw_x,drw_y)&e.code; on the screen, scaling as
-	  necessary.  Due to the large variations in capabilities of
-	  the various hardware expected to be used with this extension,
-	  it is not expected that all hardware will be able to do this
-	  exactly as described.  In that case the driver should just do
-	  ``the best it can,'' scaling as closely to the target rectangle
-	  as it can without rendering outside of it.  In the worst case,
-	  the driver can opt to just not turn on the video.
-
-    </quote>
-
-	&s.code;typedef  int (* PutStillFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,
-		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,
-		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;
-    <quote><p>
-	  This is same as &s.code;PutVideo&e.code; except that the driver
-	  should place only one frame from the stream on the screen.
-
-    </quote>
-
-	&s.code;typedef int (* GetVideoFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,
-		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,
-		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;
-    <quote><p>
-	  This is same as &s.code;PutVideo&e.code; except that the driver
-	  gets video from the screen and outputs it.  The driver should
-	  do the best it can to get the requested dimensions correct
-	  without reading from an area larger than requested.
-
-    </quote>
-
-	&s.code;typedef int (* GetStillFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,
-		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,
-		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;
-    <quote><p>
-	  This is the same as &s.code;GetVideo&e.code; except that the
-	  driver should place only one frame from the screen into the
-	  output stream.
-
-    </quote>
-
-	&s.code;typedef void (* StopVideoFuncPtr)(ScrnInfoPtr pScrn,
-			&f.indent;pointer data, Bool cleanup)&e.code;
-    <quote><p>
-	  This indicates the driver should stop displaying the video.
-	  This is used to stop both input and output video.  The
-	  &s.code;cleanup&e.code; field indicates that the video is
-	  being stopped because the client requested it to stop or
-	  because the server is exiting the current VT.  In that case
-	  the driver should deallocate any offscreen memory areas (if
-	  there are any) being used to put the video to the screen.  If
-	  &s.code;cleanup&e.code; is not set, the video is being stopped
-	  temporarily due to clipping or moving of the window, etc...
-	  and video will likely be restarted soon so the driver should
-	  not deallocate any offscreen areas associated with that port.
-
-    </quote>
-	&s.code;typedef int (* SetPortAttributeFuncPtr)(ScrnInfoPtr pScrn,
-		 &f.indent;Atom attribute,INT32 value, pointer data)&e.code;
-
-	&s.code;typedef int (* GetPortAttributeFuncPtr)(ScrnInfoPtr pScrn,
-		&f.indent;Atom attribute,INT32 *value, pointer data)&e.code;
-
-    <quote><p>
-	  A port may have particular attributes such as hue,
-	  saturation, brightness or contrast.  Xv clients set and
-	  get these attribute values by sending attribute strings
-	  (Atoms) to the server.  Such requests end up at these
-	  driver functions.  It is recommended that the driver provide
-	  at least the following attributes mentioned in the Xv client
-	  library docs:
-	  <quote>
-		&s.code;XV_ENCODING&nl;
-		XV_HUE&nl;
-		XV_SATURATION&nl;
-		XV_BRIGHTNESS&nl;
-  		XV_CONTRAST&e.code;
-	  </quote>
-	  but the driver may recognize as many atoms as it wishes.  If
-	  a requested attribute is unknown by the driver it should return
-	  &s.code;BadMatch&e.code;.  &s.code;XV_ENCODING&e.code; is the
-	  attribute intended to let the client specify which video
-	  encoding the particular port should be using (see the description
-	  of &s.code;XF86VideoEncodingRec&e.code; below).  If the
-	  requested encoding is unsupported, the driver should return
-	  &s.code;XvBadEncoding&e.code;.  If the value lies outside the
-	  advertised range &s.code;BadValue&e.code; may be returned.
-	  &s.code;Success&e.code; should be returned otherwise.
-
-    </quote>
-
-	&s.code;typedef void (* QueryBestSizeFuncPtr)(ScrnInfoPtr pScrn,
-		&f.indent;Bool motion, short vid_w, short vid_h,
-		&f.indent;short drw_w, short drw_h,
-		&f.indent;unsigned int *p_w, unsigned int *p_h, pointer data)&e.code;
-    <quote><p>
-	   &s.code;QueryBestSize&e.code; provides the client with a way
-	   to query what the destination dimensions would end up being
-	   if they were to request that an area
-	   &s.code;vid_w&e.code by &s.code;vid_h&e.code; from the video
-	   stream be scaled to rectangle of
-	   &s.code;drw_w&e.code; by &s.code;drw_h&e.code; on the screen.
-	   Since it is not expected that all hardware will be able to
-	   get the target dimensions exactly, it is important that the
-	   driver provide this function.
-
-    </quote>
-
-	&s.code;typedef  int (* PutImageFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;short src_x, short src_y, short drw_x, short drw_y,
-		&f.indent;short src_w, short src_h, short drw_w, short drw_h,
-		&f.indent;int image, char *buf, short width, short height,
-		&f.indent;Bool sync, RegionPtr clipBoxes, pointer data )&e.code;
-    <quote><p>
-	  This is similar to &s.code;PutStill&e.code; except that the
-	  source of the video is not a port but the data stored in a system
-	  memory buffer at &s.code;buf&e.code;.  The data is in the format
-	  indicated by the &s.code;image&e.code; descriptor and represents a
-	  source of size &s.code;width&e.code; by &s.code;height&e.code;.
-	  If &s.code;sync&e.code; is TRUE the driver should not return
-	  from this function until it is through reading the data
-	  from &s.code;buf&e.code;.  Returning when &s.code;sync&e.code;
-	  is TRUE indicates that it is safe for the data at &s.code;buf&e.code;
-	  to be replaced, freed, or modified.
-
-    </quote>
-
-	&s.code;typedef  int (* QueryImageAttributesFuncPtr)( ScrnInfoPtr pScrn,
-		&f.indent;int image, short *width, short *height,
-		&f.indent;int *pitches, int *offsets)&e.code;
-    <quote><p>
-	  This function is called to let the driver specify how data for
-	  a particular &s.code;image&e.code; of size &s.code;width&e.code;
-	  by &s.code;height&e.code; should be stored.  Sometimes only
-	  the size and corrected width and height are needed.  In that
-	  case &s.code;pitches&e.code; and &s.code;offsets&e.code; are
-	  NULL.  The size of the memory required for the image is returned
-	  by this function.  The &s.code;width&e.code; and
-	  &s.code;height&e.code; of the requested image can be altered by
-	  the driver to reflect format limitations (such as component
-	  sampling periods that are larger than one).  If
-	  &s.code;pitches&e.code; and &s.code;offsets&e.code; are not NULL,
-	  these will be arrays with as many elements in them as there
-	  are planes in the &s.code;image&e.code; format.  The driver
-	  should specify the pitch (in bytes) of each scanline in the
-	  particular plane as well as the offset to that plane (in bytes)
-	  from the beginning of the image.
-
-    </quote>
-
-    </quote>
-
-The XF86VideoEncodingRec:
-<quote><p>
-<verb>
-typedef struct {
-	int id;
-	char *name;
-	unsigned short width, height;
-	XvRationalRec rate;
-} XF86VideoEncodingRec, *XF86VideoEncodingPtr;
-
-</verb>
-   The &s.code;XF86VideoEncodingRec&e.code; specifies what encodings
-   the adaptor can support.  Most of this data is just informational
-   and for the client's benefit, and is what will be reported by
-   &s.code;XvQueryEncodings&e.code;.  The &s.code;id&e.code; field is
-   expected to be a unique identifier to allow the client to request a
-   certain encoding via the &s.code;XV_ENCODING&e.code; attribute string.
-
-</quote>
-
-The XF86VideoFormatRec:
-
-<quote><p>
-<verb>
-typedef struct {
-	char  depth;
-	short class;
-} XF86VideoFormatRec, *XF86VideoFormatPtr;
-</verb>
-
-    This specifies what visuals the video is viewable in.
-    &s.code;depth&e.code; is the depth of the visual (not bpp).
-    &s.code;class&e.code; is the visual class such as
-    &s.code;TrueColor&e.code;, &s.code;DirectColor&e.code; or
-    &s.code;PseudoColor&e.code;.  Initialization of an adaptor will fail
-    if none of the visuals on that screen are supported.
-
-</quote>
-
-The XF86AttributeRec:
-
-<quote><p>
-<verb>
-typedef struct {
-	int   flags;
-	int   min_value;
-	int   max_value;
-	char  *name;
-} XF86AttributeListRec, *XF86AttributeListPtr;
-
-</verb>
-
-   Each adaptor may have an array of these advertising the attributes
-   for its ports.  Currently defined flags are &s.code;XvGettable&e.code;
-   and &s.code;XvSettable&e.code; which may be OR'd together indicating that
-   attribute is ``gettable'' or ``settable'' by the client.  The
-   &s.code;min&e.code; and &s.code;max&e.code; field specify the valid range
-   for the value.  &s.code;Name&e.code; is a text string describing the
-   attribute by name.
-
-</quote>
-
-The XF86ImageRec:
-
-<quote><p>
-<verb>
-typedef struct {
-	int id;
-	int type;
-	int byte_order;
-	char guid[16];
-	int bits_per_pixel;
-	int format;
-	int num_planes;
-
-	/* for RGB formats */
-	int depth;
-	unsigned int red_mask;
-	unsigned int green_mask;
-	unsigned int blue_mask;
-
-	/* for YUV formats */
-	unsigned int y_sample_bits;
-	unsigned int u_sample_bits;
-	unsigned int v_sample_bits;
-	unsigned int horz_y_period;
-	unsigned int horz_u_period;
-	unsigned int horz_v_period;
-	unsigned int vert_y_period;
-	unsigned int vert_u_period;
-	unsigned int vert_v_period;
-	char component_order[32];
-	int scanline_order;
-} XF86ImageRec, *XF86ImagePtr;
-</verb>
-
-   XF86ImageRec describes how video source data is laid out in memory.
-   The fields are as follows:
-
-    &s.code;id&e.code;
-    <quote><p>
-	This is a unique descriptor for the format.  It is often good to
-        set this value to the FOURCC for the format when applicable.
-    </quote>
-
-    &s.code;type&e.code;
-    <quote><p>
-	This is &s.code;XvRGB&e.code; or &s.code;XvYUV&e.code;.
-    </quote>
-
-    &s.code;byte_order&e.code;
-    <quote><p>
-	This is &s.code;LSBFirst&e.code; or &s.code;MSBFirst&e.code;.
-    </quote>
-
-    &s.code;guid&e.code;
-    <quote><p>
-	This is the Globally Unique IDentifier for the format.  When
-	not applicable, all characters should be NULL.
-    </quote>
-
-    &s.code;bits_per_pixel&e.code;
-    <quote><p>
-	The number of bits taken up (but not necessarily used) by each
-	pixel.  Note that for some planar formats which have fractional
-	bits per pixel (such as IF09) this number may be rounded _down_.
-    </quote>
-
-    &s.code;format&e.code;
-    <quote><p>
-	This is &s.code;XvPlanar&e.code; or &s.code;XvPacked&e.code;.
-    </quote>
-
-   &s.code;num_planes&e.code;
-    <quote><p>
-	The number of planes in planar formats.  This should be set to
-	one for packed formats.
-    </quote>
-
-   &s.code;depth&e.code;
-    <quote><p>
-	The significant bits per pixel in RGB formats (analgous to the
-	depth of a pixmap format).
-    </quote>
-
-   &s.code;red_mask&e.code;
-   &s.code;green_mask&e.code;
-   &s.code;blue_mask&e.code;
-    <quote><p>
-	The red, green and blue bitmasks for packed RGB formats.
-    </quote>
-
-   &s.code;y_sample_bits&e.code;
-   &s.code;u_sample_bits&e.code;
-   &s.code;v_sample_bits&e.code;
-    <quote><p>
-	The y, u and v sample sizes (in bits).
-    </quote>
-
-   &s.code;horz_y_period&e.code;
-   &s.code;horz_u_period&e.code;
-   &s.code;horz_v_period&e.code;
-    <quote><p>
-	The y, u and v sampling periods in the horizontal direction.
-    </quote>
-
-   &s.code;vert_y_period&e.code;
-   &s.code;vert_u_period&e.code;
-   &s.code;vert_v_period&e.code;
-    <quote><p>
-	The y, u and v sampling periods in the vertical direction.
-    </quote>
-
-   &s.code;component_order&e.code;
-    <quote><p>
-	Uppercase ascii characters representing the order that
-	samples are stored within packed formats.  For planar formats
-	this represents the ordering of the planes.  Unused characters
-	in the 32 byte string should be set to NULL.
-    </quote>
-
-   &s.code;scanline_order&e.code;
-    <quote><p>
-	This is &s.code;XvTopToBottom&e.code; or &s.code;XvBottomToTop&e.code;.
-    </quote>
-
-  Since some formats (particular some planar YUV formats) may not
-be completely defined by the parameters above, the guid, when
-available, should provide the most accurate description of the
-format.
-
-</quote>
-
-<sect>The Loader
-<p>
-
-This section describes the interfaces to the module loader.  The loader
-interfaces can be divided into two groups: those that are only available to
-the XFree86 common layer, and those that are also available to modules.
-
-<sect1>Loader Overview
-<p>
-
-The loader is capable of loading modules in a range of object formats,
-and knowledge of these formats is built in to the loader.  Knowledge of
-new object formats can be added to the loader in a straightforward
-manner.  This makes it possible to provide OS-independent modules (for
-a given CPU architecture type).  In addition to this, the loader can
-load modules via the OS-provided &s.code;dlopen(3)&e.code; service where
-available.  Such modules are not platform independent, and the semantics
-of &s.code;dlopen()&e.code; on most systems results in significant
-limitations in the use of modules of this type.  Support for
-&s.code;dlopen()&e.code; modules in the loader is primarily for
-experimental and development purposes.
-
-Symbols exported by the loader (on behalf of the core X server) to
-modules are determined at compile time.  Only those symbols explicitly
-exported are available to modules.  All external symbols of loaded
-modules are exported to other modules, and to the core X server.  The
-loader can be requested to check for unresolved symbols at any time,
-and the action to be taken for unresolved symbols can be controlled by
-the caller of the loader.  Typically the caller identifies which symbols
-can safely remain unresolved and which cannot.
-
-NOTE:  Now that ISO-C allows pointers to functions and pointers to data to
-have different internal representations, some of the following interfaces
-will need to be revisited.
-
-<sect1>Semi-private Loader Interface
-<p>
-
-The following is the semi-private loader interface that is available to the
-XFree86 common layer.
-
-  <quote><p>
-  &s.code;void LoaderInit(void)&e.code;
-  <quote><p>
-    The &s.code;LoaderInit()&e.code; function initialises the loader,
-    and it must be called once before calling any other loader functions.
-    This function initialises the tables of exported symbols, and anything
-    else that might need to be initialised.
-
-  </quote>
-
-  &s.code;void LoaderSetPath(const char *path)&e.code;
-  <quote><p>
-    The &s.code;LoaderSetPath()&e.code; function initialises a default
-    module search path.  This must be called if calls to other functions
-    are to be made without explicitly specifying a module search path.
-    The search path &s.code;path&e.code; must be a string of one or more
-    comma separated absolute paths.  Modules are expected to be located
-    below these paths, possibly in subdirectories of these paths.
-
-  </quote>
-
-  &s.code;pointer LoadModule(const char *module, const char *path,
-		&f.indent;const char **subdirlist, const char **patternlist,
-		&f.indent;pointer options, const XF86ModReqInfo * modreq,
-		&f.indent;int *errmaj, int *errmin)&e.code;
-  <quote><p>
-    The &s.code;LoadModule()&e.code; function loads the module called
-    &s.code;module&e.code;.  The return value is a module handle, and
-    may be used in future calls to the loader that require a reference
-    to a loaded module.  The module name &s.code;module&e.code; is
-    normally the module's canonical name, which doesn't contain any
-    directory path information, or any object/library file prefixes of
-    suffixes.  Currently a full pathname and/or filename is also accepted.
-    This might change.  The other parameters are:
-
-      &s.code;path&e.code;
-	<quote><p>
-		  An optional comma-separated list of module search paths.
-                  When &s.code;NULL&e.code;, the default search path is used.
-
-	</quote>
-
-      &s.code;subdirlist&e.code;
-	<quote><p>
-		  An optional &s.code;NULL&e.code; terminated list of
-		  subdirectories to search.  When &s.code;NULL&e.code;,
-		  the default built-in list is used (refer to
-		  &s.code;stdSubdirs&e.code; in &s.code;loadmod.c&e.code;).
-		  The default list is also substituted for entries in
-		  &s.code;subdirlist&e.code; with the value
-		  &s.code;DEFAULT_LIST&e.code;.  This makes is possible
-		  to augment the default list instead of replacing it.
-		  Subdir elements must be relative, and must not contain
-		  &s.code;".."&e.code;.  If any violate this requirement,
-		  the load fails.
-
-	</quote>
-
-      &s.code;patternlist&e.code;
-	<quote><p>
-		  An optional &s.code;NULL&e.code; terminated list of
-		  POSIX regular expressions used to connect module
-		  filenames with canonical module names.  Each regex
-		  should contain exactly one subexpression that corresponds
-		  to the canonical module name.  When &s.code;NULL&e.code;,
-		  the default built-in list is used (refer to
-		  &s.code;stdPatterns&e.code; in
-		  &s.code;loadmod.c&e.code;).  The default list is also
-		  substituted for entries in &s.code;patternlist&e.code;
-		  with the value &s.code;DEFAULT_LIST&e.code;.  This
-		  makes it possible to augment the default list instead
-		  of replacing it.
-
-	</quote>
-
-      &s.code;options&e.code;
-	<quote><p>
-		  An optional parameter that is passed to the newly
-		  loaded module's &s.code;SetupProc&e.code; function
-		  (if it has one).  This argument is normally a
-		  &s.code;NULL&e.code; terminated list of
-		  &s.code;Options&e.code;, and must be interpreted that
-		  way by modules loaded directly by the XFree86 common
-		  layer.  However, it may be used for application-specific
-		  parameter passing in other situations.
-
-		  When loading ``external'' modules (modules that don't
-		  have the standard entry point, for example a
-		  special shared library) the options parameter can be
-		  set to &s.code;EXTERN_MODULE&e.code; to tell the
-		  loader not to reject the module when it doesn't find
-		  the standard entry point.
-
-	</quote>
-
-      &s.code;modreq&e.code;
-	<quote><p>
-		  An optional &s.code;XF86ModReqInfo*&e.code; containing
-		  version/ABI/vendor information to requirements to
-		  check the newly loaded module against.  The main
-		  purpose of this is to allow the loader to verify that
-		  a module of the correct type/version before running
-		  its &s.code;SetupProc&e.code; function.
-
-		  The &s.code;XF86ModReqInfo&e.code; struct is defined
-		  as follows:
-<verb>
-typedef struct {
-	CARD8        majorversion;  /* MAJOR_UNSPEC */
-	CARD8        minorversion;  /* MINOR_UNSPEC */
-	CARD16       patchlevel;    /* PATCH_UNSPEC */
-	const char * abiclass;      /* ABI_CLASS_NONE */
-	CARD32       abiversion;    /* ABI_VERS_UNSPEC */
-	const char * moduleclass;   /* MOD_CLASS_NONE */
-} XF86ModReqInfo;
-</verb>
-
-		  The information here is compared against the equivalent
-		  information in the module's
-		  &s.code;XF86ModuleVersionInfo&e.code; record (which
-		  is described below).  The values in comments above
-		  indicate ``don't care'' settings for each of the fields.
-		  The comparisons made are as follows:
-
-                    &s.code;majorversion&e.code;
-			<quote><p>
-				   Must match the module's majorversion
-				   exactly.
-
-			</quote>
-                    &s.code;minorversion&e.code;
-			<quote><p>
-				   The module's minor version must be
-				   no less than this value.  This
-				   comparison is only made if
-				   &s.code;majorversion&e.code; is
-				   specified and matches.
-
-			</quote>
-                    &s.code;patchlevel&e.code;
-			<quote><p>
-				   The module's patchlevel must be no
-				   less than this value.  This comparison
-				   is only made if
-				   &s.code;minorversion&e.code; is
-				   specified and matches.
-
-			</quote>
-                    &s.code;abiclass&e.code;
-			<quote><p>
-				   String must match the module's abiclass
-				   string.
-
-			</quote>
-                    &s.code;abiversion&e.code;
-			<quote><p>
-				   Must be consistent with the module's
-				   abiversion (major equal, minor no
-				   older).
-
-			</quote>
-                    &s.code;moduleclass&e.code;
-			<quote><p>
-				   String must match the module's
-				   moduleclass string.
-
-			</quote>
-
-	</quote>
-
-      &s.code;errmaj&e.code;
-	<quote><p>
-		  An optional pointer to a variable holding the major
-		  part or the error code.  When provided,
-		  &s.code;*errmaj&e.code; is filled in when
-		  &s.code;LoadModule()&e.code; fails.
-
-	</quote>
-
-      &s.code;errmin&e.code;
-	<quote><p>
-		  Like &s.code;errmaj&e.code;, but for the minor part
-		  of the error code.
-
-	</quote>
-
-  </quote>
-
-  &s.code;void UnloadModule(pointer mod)&e.code;
-  <quote><p>
-    This function unloads the module referred to by the handle mod.
-    All child modules are also unloaded recursively.  This function must
-    not be used to directly unload modules that are child modules (i.e.,
-    those that have been loaded with the &s.code;LoadSubModule()&e.code;
-    described below).
-
-  </quote>
-  </quote>
-
-<sect1>Module Requirements
-<p>
-
-Modules must provide information about themselves to the loader, and
-may optionally provide entry points for "setup" and "teardown" functions
-(those two functions are referred to here as &s.code;SetupProc&e.code;
-and &s.code;TearDownProc&e.code;).
-
-The module information is contained in the
-&s.code;XF86ModuleVersionInfo&e.code; struct, which is defined as follows:
-
-<quote><p><verb>
-typedef struct {
-    const char * modname;      /* name of module, e.g. "foo" */
-    const char * vendor;       /* vendor specific string */
-    CARD32       _modinfo1_;   /* constant MODINFOSTRING1/2 to find */
-    CARD32       _modinfo2_;   /* infoarea with a binary editor/sign tool */
-    CARD32       xf86version;  /* contains XF86_VERSION_CURRENT */
-    CARD8        majorversion; /* module-specific major version */
-    CARD8        minorversion; /* module-specific minor version */
-    CARD16       patchlevel;   /* module-specific patch level */
-    const char * abiclass;     /* ABI class that the module uses */
-    CARD32       abiversion;   /* ABI version */
-    const char * moduleclass;  /* module class */
-    CARD32       checksum[4];  /* contains a digital signature of the */
-                               /* version info structure */
-} XF86ModuleVersionInfo;
-</verb>
-
-The fields are used as follows:
-
-  &s.code;modname&e.code;
-	<quote><p>
-		The module's name.  This field is currently only for
-		informational purposes, but the loader may be modified
-		in future to require it to match the module's canonical
-                name.
-
-	</quote>
-
-  &s.code;vendor&e.code;
-	<quote><p>
-		The module vendor.  This field is for informational purposes
-                only.
-
-	</quote>
-
-  &s.code;_modinfo1_&e.code;
-	<quote><p>
-		This field holds the first part of a signature that can
-                be used to locate this structure in the binary.  It should
-                always be initialised to &s.code;MODINFOSTRING1&e.code;.
-
-	</quote>
-
-  &s.code;_modinfo2_&e.code;
-	<quote><p>
-		This field holds the second part of a signature that can
-                be used to locate this structure in the binary.  It should
-                always be initialised to &s.code;MODINFOSTRING2&e.code;.
-
-	</quote>
-
-  &s.code;xf86version&e.code;
-	<quote><p>
-		The XFree86 version against which the module was compiled.
-                This is mostly for informational/diagnostic purposes.  It
-                should be initialised to &s.code;XF86_VERSION_CURRENT&e.code;, which is
-                defined in &s.code;xf86Version.h&e.code;.
-
-	</quote>
-
-  &s.code;majorversion&e.code;
-	<quote><p>
-		The module-specific major version.  For modules where this
-		version is used for more than simply informational
-		purposes, the major version should only change (be
-		incremented) when ABI incompatibilities are introduced,
-		or ABI components are removed.
-
-	</quote>
-
-  &s.code;minorversion&e.code;
-	<quote><p>
-		The module-specific minor version.  For modules where this
-		version is used for more than simply informational
-		purposes, the minor version should only change (be
-		incremented) when ABI additions are made in a backward
-		compatible way.  It should be reset to zero when the major
-                version is increased.
-
-	</quote>
-
-  &s.code;patchlevel&e.code;
-	<quote><p>
-		The module-specific patch level.  The patch level should
-		increase with new revisions of the module where there
-		are no ABI changes, and it should be reset to zero when
-		the minor version is increased.
-
-	</quote>
-
-  &s.code;abiclass&e.code;
-	<quote><p>
-		The ABI class that the module requires.  The class is
-                specified as a string for easy extensibility.  It should
-		indicate which (if any) of the X server's built-in ABI
-		classes that the module relies on, or a third-party ABI
-                if appropriate.  Built-in ABI classes currently defined are:
-
-		<quote>
-                   &s.code;ABI_CLASS_NONE&e.code;
-			<quote>no class</quote>
-                   &s.code;ABI_CLASS_ANSIC&e.code;
-			<quote>only requires the ANSI C interfaces</quote>
-                   &s.code;ABI_CLASS_VIDEODRV&e.code;
-			<quote>requires the video driver ABI</quote>
-                   &s.code;ABI_CLASS_XINPUT&e.code;
-			<quote>requires the XInput driver ABI</quote>
-                   &s.code;ABI_CLASS_EXTENSION&e.code;
-			<quote>requires the extension module ABI</quote>
-                   &s.code;ABI_CLASS_FONT&e.code;
-			<quote>requires the font module ABI</quote>
-		</quote>
-
-	</quote>
-
-  &s.code;abiversion&e.code;
-	<quote><p>
-		The version of abiclass that the module requires.  The
-		version consists of major and minor components.  The
-		major version must match and the minor version must be
-		no newer than that provided by the server or parent
-		module.  Version identifiers for the built-in classes
-		currently defined are:
-
-		<quote>
-                   &s.code;ABI_ANSIC_VERSION&nl;
-                   ABI_VIDEODRV_VERSION&nl;
-                   ABI_XINPUT_VERSION&nl;
-                   ABI_EXTENSION_VERSION&nl;
-                   ABI_FONT_VERSION&e.code;
-		</quote>
-
-	</quote>
-
-  &s.code;moduleclass&e.code;
-	<quote><p>
-		This is similar to the abiclass field, except that it
-		defines the type of module rather than the ABI it
-		requires.  For example, although all video drivers require
-		the video driver ABI, not all modules that require the
-		video driver ABI are video drivers.  This distinction
-		can be made with the moduleclass.  Currently pre-defined
-		module classes are:
-
-		<quote>
-                   &s.code;MOD_CLASS_NONE&nl;
-                   MOD_CLASS_VIDEODRV&nl;
-                   MOD_CLASS_XINPUT&nl;
-                   MOD_CLASS_FONT&nl;
-                   MOD_CLASS_EXTENSION&e.code;
-		</quote>
-
-	</quote>
-
-  &s.code;checksum&e.code;
-	<quote><p>
-		Not currently used.
-
-	</quote>
-
-</quote>
-
-The module version information, and the optional &s.code;SetupProc&e.code;
-and &s.code;TearDownProc&e.code; entry points are found by the loader
-by locating a data object in the module called "modnameModuleData",
-where "modname" is the canonical name of the module.  Modules must
-contain such a data object, and it must be declared with global scope,
-be compile-time initialised, and is of the following type:
-
-<quote>
-<verb>
-typedef struct {
-    XF86ModuleVersionInfo *     vers;
-    ModuleSetupProc             setup;
-    ModuleTearDownProc          teardown;
-} XF86ModuleData;
-</verb>
-</quote>
-
-The vers parameter must be initialised to a pointer to a correctly
-initialised &s.code;XF86ModuleVersionInfo&e.code; struct.  The other
-two parameter are optional, and should be initialised to
-&s.code;NULL&e.code; when not required.  The other parameters are defined
-as
-
-  <quote><p>
-  &s.code;typedef pointer (*ModuleSetupProc)(pointer, pointer, int *, int *)&e.code;
-
-  &s.code;typedef void (*ModuleTearDownProc)(pointer)&e.code;
-
-
-  &s.code;pointer SetupProc(pointer module, pointer options,
-		&f.indent;int *errmaj, int *errmin)&e.code;
-  <quote><p>
-    When defined, this function is called by the loader after successfully
-    loading a module.  module is a handle for the newly loaded module,
-    and maybe used by the &s.code;SetupProc&e.code; if it calls other
-    loader functions that require a reference to it.   The remaining
-    arguments are those that were passed to the
-    &s.code;LoadModule()&e.code; (or &s.code;LoadSubModule()&e.code;),
-    and are described above. When the &s.code;SetupProc&e.code; is
-    successful it must return a non-&s.code;NULL&e.code; value.  The
-    loader checks this, and if it is &s.code;NULL&e.code; it unloads
-    the module and reports the failure to the caller of
-    &s.code;LoadModule()&e.code;.  If the &s.code;SetupProc&e.code;
-    does things that need to be undone when the module is unloaded,
-    it should define a &s.code;TearDownProc&e.code;, and return a
-    pointer that the &s.code;TearDownProc&e.code; can use to undo what
-    has been done.
-
-    When a module is loaded multiple times, the &s.code;SetupProc&e.code;
-    is called once for each time it is loaded.
-
-  </quote>
-
-  &s.code;void TearDownProc(pointer tearDownData)&e.code;
-  <quote><p>
-    When defined, this function is called when the loader unloads a
-    module.  The &s.code;tearDownData&e.code; parameter is the return
-    value of the &s.code;SetupProc()&e.code; that was called when the
-    module was loaded.  The purpose of this function is to clean up
-    before the module is unloaded (for example, by freeing allocated
-    resources).
-
-  </quote>
-  </quote>
-
-<sect1>Public Loader Interface
-<p>
-
-The following is the Loader interface that is available to any part of
-the server, and may also be used from within modules.
-
-  <quote><p>
-  &s.code;pointer LoadSubModule(pointer parent, const char *module,
-		&f.indent;const char **subdirlist, const char **patternlist,
-		&f.indent;pointer options, const XF86ModReqInfo * modreq,
-		&f.indent;int *errmaj, int *errmin)&e.code;
-  <quote><p>
-    This function is like the &s.code;LoadModule()&e.code; function
-    described above, except that the module loaded is registered as a
-    child of the calling module.  The &s.code;parent&e.code; parameter
-    is the calling module's handle.  Modules loaded with this function
-    are automatically unloaded when the parent module is unloaded.  The
-    other difference is that the path parameter may not be specified.
-    The module search path used for modules loaded with this function
-    is the default search path as initialised with
-    &s.code;LoaderSetPath()&e.code;.
-
-  </quote>
-
-  &s.code;void UnloadSubModule(pointer module)&e.code;
-  <quote><p>
-    This function unloads the module with handle &s.code;module&e.code;.
-    If that module itself has children, they are also unloaded.  It is
-    like &s.code;UnloadModule()&e.code;, except that it is safe to use
-    for unloading child modules.
-
-  </quote>
-
-  &s.code;pointer LoaderSymbol(const char *symbol)&e.code;
-  <quote><p>
-    This function returns the address of the symbol with name
-    &s.code;symbol&e.code;.  This may be used to locate a module entry
-    point with a known name.
-
-  </quote>
-
-  &s.code;char **LoaderlistDirs(const char **subdirlist,
-			&f.indent;const char **patternlist)&e.code;
-  <quote><p>
-    This function returns a &s.code;NULL&e.code; terminated list of
-    canonical modules names for modules found in the default module
-    search path.  The &s.code;subdirlist&e.code; and
-    &s.code;patternlist&e.code; parameters are as described above, and
-    can be used to control the locations and names that are searched.
-    If no modules are found, the return value is &s.code;NULL&e.code;.
-    The returned list should be freed by calling
-    &s.code;LoaderFreeDirList()&e.code; when it is no longer needed.
-
-  </quote>
-
-  &s.code;void LoaderFreeDirList(char **list)&e.code;
-  <quote><p>
-    This function frees a module list created by
-    &s.code;LoaderlistDirs()&e.code;.
-
-  </quote>
-
-  &s.code;void LoaderReqSymLists(const char **list0, ...)&e.code;
-  <quote><p>
-    This function allows the registration of required symbols with the
-    loader.  It is normally used by a caller of
-    &s.code;LoadSubModule()&e.code;.  If any symbols registered in this
-    way are found to be unresolved when
-    &s.code;LoaderCheckUnresolved()&e.code; is called then
-    &s.code;LoaderCheckUnresolved()&e.code; will report a failure.
-    The function takes one or more &s.code;NULL&e.code; terminated
-    lists of symbols.  The end of the argument list is indicated by a
-    &s.code;NULL&e.code; argument.
-
-  </quote>
-
-  &s.code;void LoaderReqSymbols(const char *sym0, ...)&e.code;
-  <quote><p>
-    This function is like &s.code;LoaderReqSymLists()&e.code; except
-    that its arguments are symbols rather than lists of symbols.  This
-    function is more convenient when single functions are to be registered,
-    especially when the single function might depend on runtime factors.
-    The end of the argument list is indicated by a &s.code;NULL&e.code;
-    argument.
-
-  </quote>
-
-  &s.code;void LoaderRefSymLists(const char **list0, ...)&e.code;
-  <quote><p>
-    This function allows the registration of possibly unresolved symbols
-    with the loader.  When &s.code;LoaderCheckUnresolved()&e.code; is
-    run it won't generate warnings for symbols registered in this way
-    unless they were also registered as required symbols.
-    The function takes one or more &s.code;NULL&e.code; terminated
-    lists of symbols.  The end of the argument list is indicated by a
-    &s.code;NULL&e.code; argument.
-
-  </quote>
-
-  &s.code;void LoaderRefSymbols(const char *sym0, ...)&e.code;
-  <quote><p>
-    This function is like &s.code;LoaderRefSymLists()&e.code; except
-    that its arguments are symbols rather than lists of symbols.  This
-    function is more convenient when single functions are to be registered,
-    especially when the single function might depend on runtime factors.
-    The end of the argument list is indicated by a &s.code;NULL&e.code;
-    argument.
-
-  </quote>
-
-  &s.code;int LoaderCheckUnresolved(int delayflag)&e.code;
-  <quote><p>
-    This function checks for unresolved symbols.  It generates warnings
-    for unresolved symbols that have not been registered with
-    &s.code;LoaderRefSymLists()&e.code;, and maps them to a dummy
-    function.  This behaviour may change in future.  If unresolved
-    symbols are found that have been registered with
-    &s.code;LoaderReqSymLists()&e.code; or
-    &s.code;LoaderReqSymbols()&e.code; then this function returns a
-    non-zero value.  If none of these symbols are unresolved the return
-    value is zero, indicating success.
-
-    The &s.code;delayflag&e.code; parameter should normally be set to
-    &s.code;LD_RESOLV_IFDONE&e.code;.
-
-  </quote>
-
-  &s.code;LoaderErrorMsg(const char *name, const char *modname,
-			&f.indent;int errmaj, int errmin)&e.code;
-  <quote><p>
-    This function prints an error message that includes the text ``Failed
-    to load module'', the module name &s.code;modname&e.code;, a message
-    specific to the &s.code;errmaj&e.code; value, and the value if
-    &s.code;errmin&e.code;.  If &s.code;name&e.code; is
-    non-&s.code;NULL&e.code;, it is printed as an identifying prefix
-    to the message (followed by a `:').
-
-  </quote>
-  </quote>
-
-<sect1>Special Registration Functions
-<p>
-
-The loader contains some functions for registering some classes of modules.
-These may be moved out of the loader at some point.
-
-  <quote><p>
-  &s.code;void LoadExtension(ExtensionModule *ext)&e.code;
-  <quote><p>
-    This registers the entry points for the extension identified by
-    &s.code;ext&e.code;.  The &s.code;ExtensionModule&e.code; struct is
-    defined as:
-
-<quote>
-<verb>
-typedef struct {
-    InitExtension       initFunc;
-    char *              name;
-    Bool                *disablePtr;
-    InitExtension       setupFunc;
-} ExtensionModule;
-</verb>
-</quote>
-
-  </quote>
-
-  &s.code;void LoadFont(FontModule *font)&e.code;
-  <quote><p>
-    This registers the entry points for the font rasteriser module
-    identified by &s.code;font&e.code;.  The &s.code;FontModule&e.code;
-    struct is defined as:
-
-<quote>
-<verb>
-typedef struct {
-    InitFont    initFunc;
-    char *      name;
-    pointer     module;
-} FontModule;
-</verb>
-</quote>
-
-  </quote>
-  </quote>
-
-</sect>
-
-
-<sect>Helper Functions
-<p>
-
-This section describe ``helper'' functions that video driver
-might find useful.  While video drivers are not required to use any of
-these to be considered ``compliant'', the use of appropriate helpers is
-strongly encouraged to improve the consistency of driver behaviour.
-
-<sect1>Functions for printing messages
-<p>
-
-  <quote><p>
-    &s.code;ErrorF(const char *format, ...)&e.code;
-    <quote><p>
-      This is the basic function for writing to the error log (typically
-      stderr and/or a log file).  Video drivers should usually avoid
-      using this directly in favour of the more specialised functions
-      described below.  This function is useful for printing messages
-      while debugging a driver.
-
-    </quote>
-
-    &s.code;FatalError(const char *format, ...)&e.code;
-    <quote><p>
-      This prints a message and causes the Xserver to abort.  It should
-      rarely be used within a video driver, as most error conditions
-      should be flagged by the return values of the driver functions.
-      This allows the higher layers to decide how to proceed.  In rare
-      cases, this can be used within a driver if a fatal unexpected
-      condition is found.
-
-    </quote>
-
-    &s.code;xf86ErrorF(const char *format, ...)&e.code;
-    <quote><p>
-      This is like &s.code;ErrorF()&e.code;, except that the message is
-      only printed when the Xserver's verbosity level is set to the
-      default (&s.code;1&e.code;) or higher.  It means that the messages
-      are not printed when the server is started with the
-      &s.cmd;-quiet&e.cmd; flag.  Typically this function would only be
-      used for continuing messages started with one of the more specialised
-      functions described below.
-
-    </quote>
-
-    &s.code;xf86ErrorFVerb(int verb, const char *format, ...)&e.code;
-    <quote><p>
-      Like &s.code;xf86ErrorF()&e.code;, except the minimum verbosity
-      level for which the message is to be printed is given explicitly.
-      Passing a &s.code;verb&e.code; value of zero means the message
-      is always printed.  A value higher than &s.code;1&e.code; can be
-      used for information would normally not be needed, but which might
-      be useful when diagnosing problems.
-
-    </quote>
-
-    &s.code;xf86Msg(MessageType type, const char *format, ...)&e.code;
-    <quote><p>
-      This is like &s.code;xf86ErrorF()&e.code;, except that the message
-      is prefixed with a marker determined by the value of
-      &s.code;type&e.code;.  The marker is used to indicate the type of
-      message (warning, error, probed value, config value, etc).  Note
-      the &s.code;xf86Verbose&e.code; value is ignored for messages of
-      type &s.code;X_ERROR&e.code;.
-
-      The marker values are:
-
-      <quote>
-      &s.code;X_PROBED&e.code;
-	<quote>Value was probed.</quote>
-      &s.code;X_CONFIG&e.code;
-	<quote>Value was given in the config file.</quote>
-      &s.code;X_DEFAULT&e.code;
-	<quote>Value is a default.</quote>
-      &s.code;X_CMDLINE&e.code;
-	<quote>Value was given on the command line.</quote>
-      &s.code;X_NOTICE&e.code;
-	<quote>Notice.</quote>
-      &s.code;X_ERROR&e.code;
-	<quote>Error message.</quote>
-      &s.code;X_WARNING&e.code;
-	<quote>Warning message.</quote>
-      &s.code;X_INFO&e.code;
-	<quote>Informational message.</quote>
-      &s.code;X_NONE&e.code;
-	<quote>No prefix.</quote>
-      &s.code;X_NOT_IMPLEMENTED&e.code;
-	<quote>The message relates to functionality that is not yet
-               implemented.</quote>
-      </quote>
-
-
-    </quote>
-
-    &s.code;xf86MsgVerb(MessageType type, int verb, const char *format, ...)&e.code;
-    <quote><p>
-      Like &s.code;xf86Msg()&e.code;, but with the verbosity level given
-      explicitly.
-
-    </quote>
-
-    &s.code;xf86DrvMsg(int scrnIndex, MessageType type, const char *format, ...)&e.code;
-    <quote><p>
-      This is like &s.code;xf86Msg()&e.code; except that the driver's
-      name (the &s.code;name&e.code; field of the
-      &s.code;ScrnInfoRec&e.code;) followed by the
-      &s.code;scrnIndex&e.code; in parentheses is printed following the
-      prefix.  This should be used by video drivers in most cases as it
-      clearly indicates which driver/screen the message is for.  If
-      &s.code;scrnIndex&e.code; is negative, this function behaves
-      exactly like &s.code;xf86Msg()&e.code;.
-
-      NOTE: This function can only be used after the
-      &s.code;ScrnInfoRec&e.code; and its &s.code;name&e.code; field
-      have been allocated.  Normally, this means that it can not be
-      used before the END of the &s.code;ChipProbe()&e.code; function.
-      Prior to that, use &s.code;xf86Msg()&e.code;, providing the
-      driver's name explicitly.  No screen number can be supplied at
-      that point.
-
-    </quote>
-
-    &s.code;xf86DrvMsgVerb(int scrnIndex, MessageType type, int verb,
-		&f.indent;const char *format, ...)&e.code;
-    <quote><p>
-      Like &s.code;xf86DrvMsg()&e.code;, but with the verbosity level
-      given explicitly.
-
-    </quote>
-  </quote>
-
-
-<sect1>Functions for setting values based on command line and config file
-<p>
-
-  <quote><p>
-    &s.code;Bool xf86SetDepthBpp(ScrnInfoPtr scrp, int depth, int bpp,
-                        &f.indent;int fbbpp, int depth24flags)&e.code;
-    <quote><p>
-      This function sets the &s.code;depth&e.code;, &s.code;pixmapBPP&e.code; and &s.code;bitsPerPixel&e.code; fields
-      of the &s.code;ScrnInfoRec&e.code;.  It also determines the defaults for display-wide
-      attributes and pixmap formats the screen will support, and finds
-      the Display subsection that matches the depth/bpp.  This function
-      should normally be called very early from the
-      &s.code;ChipPreInit()&e.code; function.
-
-      It requires that the &s.code;confScreen&e.code; field of the &s.code;ScrnInfoRec&e.code; be
-      initialised prior to calling it.  This is done by the XFree86
-      common layer prior to calling &s.code;ChipPreInit()&e.code;.
-
-      The parameters passed are:
-
-        &s.code;depth&e.code;
-	<quote><p>
-		driver's preferred default depth if no other is given.
-                If zero, use the overall server default.
-
-	</quote>
-        &s.code;bpp&e.code;
-	<quote><p>
-		Same, but for the pixmap bpp.
-
-	</quote>
-        &s.code;fbbpp&e.code;
-	<quote><p>
-		Same, but for the framebuffer bpp.
-
-	</quote>
-        &s.code;depth24flags&e.code;
-	<quote><p>
-		Flags that indicate the level of 24/32bpp support
-                and whether conversion between different framebuffer
-                and pixmap formats is supported.  The flags for this
-                argument are defined as follows, and multiple flags
-                may be ORed together:
-
-               &s.code;NoDepth24Support&e.code;
-		<quote>No depth 24 formats supported</quote>
-               &s.code;Support24bppFb&e.code;
-		<quote>24bpp framebuffer supported</quote>
-               &s.code;Support32bppFb&e.code;
-		<quote>32bpp framebuffer supported</quote>
-               &s.code;SupportConvert24to32&e.code;
-		<quote>Can convert 24bpp pixmap to 32bpp fb</quote>
-               &s.code;SupportConvert32to24&e.code;
-		<quote>Can convert 32bpp pixmap to 24bpp fb</quote>
-               &s.code;ForceConvert24to32&e.code;
-		<quote>Force 24bpp pixmap to 32bpp fb conversion</quote>
-               &s.code;ForceConvert32to24&e.code;
-		<quote>Force 32bpp pixmap to 24bpp fb conversion</quote>
-
-	</quote>
-
-      It uses the command line, config file, and default values in the
-      correct order of precedence to determine the depth and bpp values.
-      It is up to the driver to check the results to see that it supports
-      them.  If not the &s.code;ChipPreInit()&e.code; function should
-      return &s.code;FALSE&e.code;.
-
-      If only one of depth/bpp is given, the other is set to a reasonable
-      (and consistent) default.
-
-      If a driver finds that the initial &s.code;depth24flags&e.code;
-      it uses later results in a fb format that requires more video
-      memory than is available it may call this function a second time
-      with a different &s.code;depth24flags&e.code; setting.
-
-      On success, the return value is &s.code;TRUE&e.code;.  On failure
-      it prints an error message and returns &s.code;FALSE&e.code;.
-
-      The following fields of the &s.code;ScrnInfoRec&e.code; are
-      initialised by this function:
-
-	<quote>
-	&s.code;depth&e.code;, &s.code;bitsPerPixel&e.code;,
-	&s.code;display&e.code;, &s.code;imageByteOrder&e.code;,
-	&s.code;bitmapScanlinePad&e.code;,
-	&s.code;bitmapScanlineUnit&e.code;, &s.code;bitmapBitOrder&e.code;,
-	&s.code;numFormats&e.code;, &s.code;formats&e.code;,
-	&s.code;fbFormat&e.code;.
-	</quote>
-
-    </quote>
-
-    &s.code;void xf86PrintDepthBpp(scrnInfoPtr scrp)&e.code;
-    <quote><p>
-      This function can be used to print out the depth and bpp settings.
-      It should be called after the final call to
-      &s.code;xf86SetDepthBpp()&e.code;.
-
-    </quote>
-
-    &s.code;Bool xf86SetWeight(ScrnInfoPtr scrp, rgb weight, rgb mask)&e.code;
-    <quote><p>
-      This function sets the &s.code;weight&e.code;, &s.code;mask&e.code;,
-      &s.code;offset&e.code; and &s.code;rgbBits&e.code; fields of the
-      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly
-      early in the &s.code;ChipPreInit()&e.code; function for
-      depths&nbsp;>&nbsp;8bpp.
-
-      It requires that the &s.code;depth&e.code; and
-      &s.code;display&e.code; fields of the &s.code;ScrnInfoRec&e.code;
-      be initialised prior to calling it.
-
-      The parameters passed are:
-
-        &s.code;weight&e.code;
-	<quote><p>
-		driver's preferred default weight if no other is given.
-                If zero, use the overall server default.
-
-	</quote>
-
-        &s.code;mask&e.code;
-	<quote><p>
-		Same, but for mask.
-
-	</quote>
-
-      It uses the command line, config file, and default values in the
-      correct order of precedence to determine the weight value.  It
-      derives the mask and offset values from the weight and the defaults.
-      It is up to the driver to check the results to see that it supports
-      them.  If not the &s.code;ChipPreInit()&e.code; function should
-      return &s.code;FALSE&e.code;.
-
-      On success, this function prints a message showing the weight
-      values selected, and returns &s.code;TRUE&e.code;.
-
-      On failure it prints an error message and returns &s.code;FALSE&e.code;.
-
-      The following fields of the &s.code;ScrnInfoRec&e.code; are
-      initialised by this function:
-
-	<quote>
-        &s.code;weight&e.code;, &s.code;mask&e.code;, &s.code;offset&e.code;.
-	</quote>
-
-    </quote>
-
-    &s.code;Bool xf86SetDefaultVisual(ScrnInfoPtr scrp, int visual)&e.code;
-    <quote><p>
-      This function sets the &s.code;defaultVisual&e.code; field of the
-      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly
-      early from the &s.code;ChipPreInit()&e.code; function.
-
-      It requires that the &s.code;depth&e.code; and
-      &s.code;display&e.code; fields of the &s.code;ScrnInfoRec&e.code;
-      be initialised prior to calling it.
-
-      The parameters passed are:
-
-        &s.code;visual&e.code;
-	<quote><p>
-		driver's preferred default visual if no other is given.
-		If &s.code;-1&e.code;, use the overall server default.
-
-	</quote>
-
-      It uses the command line, config file, and default values in the
-      correct order of precedence to determine the default visual value.
-      It is up to the driver to check the result to see that it supports
-      it.  If not the &s.code;ChipPreInit()&e.code; function should
-      return &s.code;FALSE&e.code;.
-
-      On success, this function prints a message showing the default visual
-      selected, and returns &s.code;TRUE&e.code;.
-
-      On failure it prints an error message and returns &s.code;FALSE&e.code;.
-
-    </quote>
-
-    &s.code;Bool xf86SetGamma(ScrnInfoPtr scrp, Gamma gamma)&e.code;
-    <quote><p>
-      This function sets the &s.code;gamma&e.code; field of the
-      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly
-      early from the &s.code;ChipPreInit()&e.code; function in cases
-      where the driver supports gamma correction.
-
-      It requires that the &s.code;monitor&e.code; field of the
-      &s.code;ScrnInfoRec&e.code; be initialised prior to calling it.
-
-      The parameters passed are:
-
-        &s.code;gamma&e.code;
-	<quote><p>
-		driver's preferred default gamma if no other is given.
-		If zero (&s.code;< 0.01&e.code;), use the overall server
-		default.
-
-	</quote>
-
-      It uses the command line, config file, and default values in the
-      correct order of precedence to determine the gamma value.  It is
-      up to the driver to check the results to see that it supports
-      them.  If not the &s.code;ChipPreInit()&e.code; function should
-      return &s.code;FALSE&e.code;.
-
-      On success, this function prints a message showing the gamma
-      value selected, and returns &s.code;TRUE&e.code;.
-
-      On failure it prints an error message and returns &s.code;FALSE&e.code;.
-
-    </quote>
-
-    &s.code;void xf86SetDpi(ScrnInfoPtr pScrn, int x, int y)&e.code;
-    <quote><p>
-      This function sets the &s.code;xDpi&e.code; and &s.code;yDpi&e.code;
-      fields of the &s.code;ScrnInfoRec&e.code;.  The driver can specify
-      preferred defaults by setting &s.code;x&e.code; and &s.code;y&e.code;
-      to non-zero values.  The &s.cmd;-dpi&e.cmd; command line option
-      overrides all other settings.  Otherwise, if the
-      &s.key;DisplaySize&e.key; entry is present in the screen's &k.monitor;
-      config file section, it is used together with the virtual size to
-      calculate the dpi values.  This function should be called after
-      all the mode resolution has been done.
-
-    </quote>
-
-    &s.code;void xf86SetBlackWhitePixels(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      This functions sets the &s.code;blackPixel&e.code; and
-      &s.code;whitePixel&e.code; fields of the &s.code;ScrnInfoRec&e.code;
-      according to whether or not the &s.cmd;-flipPixels&e.cmd; command
-      line options is present.
-
-    </quote>
-
-    &s.code;const char *xf86GetVisualName(int visual)&e.code;
-    <quote><p>
-      Returns a printable string with the visual name matching the
-      numerical visual class provided.  If the value is outside the
-      range of valid visual classes, &s.code;NULL&e.code; is returned.
-
-    </quote>
-  </quote>
-
-
-<sect1>Primary Mode functions
-<p>
-
-The primary mode helper functions are those which would normally be
-used by a driver, unless it has unusual requirements which cannot
-be catered for the by the helpers.
-
-  <quote><p>
-    &s.code;int xf86ValidateModes(ScrnInfoPtr scrp, DisplayModePtr availModes,
-		&f.indent;char **modeNames, ClockRangePtr clockRanges,
-		&f.indent;int *linePitches, int minPitch, int maxPitch,
-		&f.indent;int pitchInc, int minHeight, int maxHeight,
-		&f.indent;int virtualX, int virtualY,
-		&f.indent;unsigned long apertureSize,
-		&f.indent;LookupModeFlags strategy)&e.code;
-    <quote><p>
-      This function basically selects the set of modes to use based on
-      those available and the various constraints.  It also sets some
-      other related parameters.  It is normally called near the end of
-      the &s.code;ChipPreInit()&e.code; function.
-
-      The parameters passed to the function are:
-
-        &s.code;availModes&e.code;
-	<quote><p>
-		List of modes available for the monitor.
-
-	</quote>
-        &s.code;modeNames&e.code;
-	<quote><p>
-		List of mode names that the screen is requesting.
-
-	</quote>
-        &s.code;clockRanges&e.code;
-	<quote><p>
-		A list of clock ranges allowed by the driver.  Each
-		range includes whether interlaced or multiscan modes
-		are supported for that range.  See below for more on
-		&s.code;clockRanges&e.code;.
-
-	</quote>
-        &s.code;linePitches&e.code;
-	<quote><p>
-		List of line pitches supported by the driver.
-		This is optional and should be &s.code;NULL&e.code; when
-		not used.
-
-	</quote>
-        &s.code;minPitch&e.code;
-	<quote><p>
-		Minimum line pitch supported by the driver.  This must
-		be supplied when &s.code;linePitches&e.code; is
-		&s.code;NULL&e.code;, and is ignored otherwise.
-
-	</quote>
-        &s.code;maxPitch&e.code;
-	<quote><p>
-		Maximum line pitch supported by the driver.  This is
-		required when &s.code;minPitch&e.code; is required.
-
-	</quote>
-        &s.code;pitchInc&e.code;
-	<quote><p>
-		Granularity of horizontal pitch values as supported by
-		the chipset.  This is expressed in bits.  This must be
-		supplied.
-
-	</quote>
-        &s.code;minHeight&e.code;
-	<quote><p>
-		minimum virtual height allowed.  If zero, no limit is
-		imposed.
-
-	</quote>
-        &s.code;maxHeight&e.code;
-	<quote><p>
-		maximum virtual height allowed.  If zero, no limit is
-		imposed.
-
-	</quote>
-        &s.code;virtualX&e.code;
-	<quote><p>
-		If greater than zero, this is the virtual width value
-		that will be used.  Otherwise, the virtual width is
-		chosen to be the smallest that can accommodate the modes
-		selected.
-
-	</quote>
-        &s.code;virtualY&e.code;
-	<quote><p>
-		If greater than zero, this is the virtual height value
-		that will be used.  Otherwise, the virtual height is
-		chosen to be the smallest that can accommodate the modes
-		selected.
-
-	</quote>
-        &s.code;apertureSize&e.code;
-	<quote><p>
-		The size (in bytes) of the aperture used to access video
-		memory.
-
-	</quote>
-        &s.code;strategy&e.code;
-	<quote><p>
-		The strategy to use when choosing from multiple modes
-		with the same name.  The options are:
-
-                &s.code;LOOKUP_DEFAULT&e.code;
-		<quote>???</quote>
-                &s.code;LOOKUP_BEST_REFRESH&e.code;
-		<quote>mode with best refresh rate</quote>
-                &s.code;LOOKUP_CLOSEST_CLOCK&e.code;
-		<quote>mode with closest matching clock</quote>
-                &s.code;LOOKUP_LIST_ORDER&e.code;
-		<quote>first usable mode in list</quote>
-
-		The following options can also be combined (OR'ed) with
-		one of the above:
-
-                &s.code;LOOKUP_CLKDIV2&e.code;
-		<quote>Allow halved clocks</quote>
-		&s.code;LOOKUP_OPTIONAL_TOLERANCES&e.code;
-		<quote>Allow missing horizontal sync and/or vertical refresh
-		ranges in the xorg.conf Monitor section</quote>
-
-		&s.code;LOOKUP_OPTIONAL_TOLERANCES&e.code; should only be
-		specified when the driver can ensure all modes it generates
-		can sync on, or at least not damage, the monitor or digital
-		flat panel.  Horizontal sync and/or vertical refresh ranges
-		specified by the user will still be honoured (and acted upon).
-
-	</quote>
-
-      This function requires that the following fields of the
-      &s.code;ScrnInfoRec&e.code; are initialised prior to calling it:
-
-        &s.code;clock[]&e.code;
-	<quote>List of discrete clocks (when non-programmable)</quote>
-        &s.code;numClocks&e.code;
-	<quote>Number of discrete clocks (when non-programmable)</quote>
-        &s.code;progClock&e.code;
-	<quote>Whether the clock is programmable or not</quote>
-        &s.code;monitor&e.code;
-	<quote>Pointer to the applicable xorg.conf monitor section</quote>
-        &s.code;fdFormat&e.code;
-	<quote>Format of the screen buffer</quote>
-        &s.code;videoRam&e.code;
-	<quote>total video memory size (in bytes)</quote>
-        &s.code;maxHValue&e.code;
-	<quote>Maximum horizontal timing value allowed</quote>
-        &s.code;maxVValue&e.code;
-	<quote>Maximum vertical timing value allowed</quote>
-        &s.code;xInc&e.code;
-	<quote>Horizontal timing increment in pixels (defaults to 8)</quote>
-
-      This function fills in the following &s.code;ScrnInfoRec&e.code;
-      fields:
-
-        &s.code;modePool&e.code;
-	<quote><p>
-		A subset of the modes available to the monitor which
-                are compatible with the driver.
-
-	</quote>
-        &s.code;modes&e.code;
-	<quote><p>
-		One mode entry for each of the requested modes, with
-                the status field of each filled in to indicate if
-                the mode has been accepted or not.  This list of
-                modes is a circular list.
-
-	</quote>
-        &s.code;virtualX&e.code;
-	<quote><p>
-		The resulting virtual width.
-
-	</quote>
-        &s.code;virtualY&e.code;
-	<quote><p>
-		The resulting virtual height.
-
-	</quote>
-        &s.code;displayWidth&e.code;
-	<quote><p>
-		The resulting line pitch.
-
-	</quote>
-        &s.code;virtualFrom&e.code;
-	<quote><p>
-		Where the virtual size was determined from.
-
-	</quote>
-
-      The first stage of this function checks that the
-      &s.code;virtualX&e.code; and &s.code;virtualY&e.code; values
-      supplied (if greater than zero) are consistent with the line pitch
-      and &s.code;maxHeight&e.code; limitations.  If not, an error
-      message is printed, and the return value is &s.code;-1&e.code;.
-
-      The second stage sets up the mode pool, eliminating immediately
-      any modes that exceed the driver's line pitch limits, and also
-      the virtual width and height limits (if greater than zero).  For
-      each mode removed an informational message is printed at verbosity
-      level &s.code;2&e.code;.  If the mode pool ends up being empty,
-      a warning message is printed, and the return value is
-      &s.code;0&e.code;.
-
-      The final stage is to lookup each mode name, and fill in the remaining
-      parameters.  If an error condition is encountered, a message is
-      printed, and the return value is &s.code;-1&e.code;.  Otherwise,
-      the return value is the number of valid modes found
-      (&s.code;0&e.code; if none are found).
-
-      Even if the supplied mode names include duplicates, no two names will
-      ever match the same mode.  Furthermore, if the supplied mode names do not
-      yield a valid mode (including the case where no names are passed at all),
-      the function will continue looking through the mode pool until it finds
-      a mode that survives all checks, or until the mode pool is exhausted.
-
-      A message is only printed by this function when a fundamental
-      problem is found.  It is intended that this function may be called
-      more than once if there is more than one set of constraints that
-      the driver can work within.
-
-      If this function returns &s.code;-1&e.code;, the
-      &s.code;ChipPreInit()&e.code; function should return
-      &s.code;FALSE&e.code;.
-
-      &s.code;clockRanges&e.code; is a linked list of clock ranges
-      allowed by the driver.  If a mode doesn't fit in any of the defined
-      &s.code;clockRanges&e.code;, it is rejected.  The first
-      &s.code;clockRange&e.code; that matches all requirements is used.
-      This structure needs to be initialized to NULL when allocated.
-
-      &s.code;clockRanges&e.code; contains the following fields:
-
-        &s.code;minClock&nl;
-        maxClock&e.code;
-	<quote><p>
-		The lower and upper mode clock bounds for which the rest
-		of the &s.code;clockRange&e.code; parameters apply.
-		Since these are the mode clocks, they are not scaled
-		with the &s.code;ClockMulFactor&e.code; and
-		&s.code;ClockDivFactor&e.code;.  It is up to the driver
-		to adjust these values if they depend on the clock
-		scaling factors.
-
-	</quote>
-        &s.code;clockIndex&e.code;
-	<quote><p>
-		(not used yet) &s.code;-1&e.code; for programmable clocks
-
-	</quote>
-        &s.code;interlaceAllowed&e.code;
-	<quote><p>
-		&s.code;TRUE&e.code; if interlacing is allowed for this
-		range
-
-	</quote>
-        &s.code;doubleScanAllowed&e.code;
-	<quote><p>
-		&s.code;TRUE&e.code; if doublescan or multiscan is allowed
-		for this range
-
-	</quote>
-        &s.code;ClockMulFactor&nl;
-        ClockDivFactor&e.code;
-	<quote><p>
-		Scaling factors that are applied to the mode clocks ONLY
-		before selecting a clock index (when there is no
-		programmable clock) or a &s.code;SynthClock&e.code;
-		value.  This is useful for drivers that support pixel
-		multiplexing or that need to scale the clocks because
-		of hardware restrictions (like sending 24bpp data to an
-		8 bit RAMDAC using a tripled clock).
-
-		Note that these parameters describe what must be done
-		to the mode clock to achieve the data transport clock
-		between graphics controller and RAMDAC.  For example
-		for &s.code;2:1&e.code; pixel multiplexing, two pixels
-		are sent to the RAMDAC on each clock.  This allows the
-		RAMDAC clock to be half of the actual pixel clock.
-		Hence, &s.code;ClockMulFactor=1&e.code; and
-		&s.code;ClockDivFactor=2&e.code;.  This means that the
-		clock used for clock selection (ie, determining the
-		correct clock index from the list of discrete clocks)
-		or for the &s.code;SynthClock&e.code; field in case of
-		a programmable clock is:  (&s.code;mode-&gt;Clock *
-		ClockMulFactor) / ClockDivFactor&e.code;.
-
-	</quote>
-	&s.code;PrivFlags&e.code;
-	<quote><p>
-		This field is copied into the
-		&s.code;mode-&gt;PrivFlags&e.code; field when this
-		&s.code;clockRange&e.code; is selected by
-		&s.code;xf86ValidateModes()&e.code;.  It allows the
-		driver to find out what clock range was selected, so it
-		knows it needs to set up pixel multiplexing or any other
-		range-dependent feature.  This field is purely
-		driver-defined: it may contain flag bits, an index or
-		anything else (as long as it is an &s.code;INT&e.code;).
-	</quote>
-
-      Note that the &s.code;mode-&gt;SynthClock&e.code; field is always
-      filled in by &s.code;xf86ValidateModes()&e.code;: it will contain
-      the ``data transport clock'', which is the clock that will have
-      to be programmed in the chip when it has a programmable clock, or
-      the clock that will be picked from the clocks list when it is not
-      a programmable one.  Thus:
-
-         &s.code;mode-&gt;SynthClock =
-		&f.indent;(mode-&gt;Clock * ClockMulFactor) / ClockDivFactor&e.code;
-
-    </quote>
-
-    &s.code;void xf86PruneDriverModes(ScrnInfoPtr scrp)&e.code;
-    <quote><p>
-      This function deletes modes in the modes field of the
-      &s.code;ScrnInfoRec&e.code; that have been marked as invalid.
-      This is normally run after having run
-      &s.code;xf86ValidateModes()&e.code; for the last time.  For each
-      mode that is deleted, a warning message is printed out indicating
-      the reason for it being deleted.
-
-    </quote>
-
-    &s.code;void xf86SetCrtcForModes(ScrnInfoPtr scrp, int adjustFlags)&e.code;
-    <quote><p>
-      This function fills in the &s.code;Crtc*&e.code; fields for all
-      the modes in the &s.code;modes&e.code; field of the
-      &s.code;ScrnInfoRec&e.code;.  The &s.code;adjustFlags&e.code;
-      parameter determines how the vertical CRTC values are scaled for
-      interlaced modes.  They are halved if it is
-      &s.code;INTERLACE_HALVE_V&e.code;.  The vertical CRTC values are
-      doubled for doublescan modes, and are further multiplied by the
-      &s.code;VScan&e.code; value.
-
-      This function is normally called after calling
-      &s.code;xf86PruneDriverModes()&e.code;.
-
-    </quote>
-
-    &s.code;void xf86PrintModes(ScrnInfoPtr scrp)&e.code;
-    <quote><p>
-      This function prints out the virtual size setting, and the line
-      pitch being used.  It also prints out two lines for each mode being
-      used.  The first line includes the mode's pixel clock, horizontal sync
-      rate, refresh rate, and whether it is interlaced, doublescanned and/or
-      multi-scanned.  The second line is the mode's Modeline.
-
-      This function is normally called after calling
-      &s.code;xf86SetCrtcForModes()&e.code;.
-
-    </quote>
-  </quote>
-
-
-<sect1>Secondary Mode functions
-<p>
-
-The secondary mode helper functions are functions which are normally
-used by the primary mode helper functions, and which are not normally
-called directly by a driver.  If a driver has unusual requirements
-and needs to do its own mode validation, it might be able to make
-use of some of these secondary mode helper functions.
-
-  <quote><p>
-    &s.code;int xf86GetNearestClock(ScrnInfoPtr scrp, int freq, Bool allowDiv2,
-			&f.indent;int *divider)&e.code;
-    <quote><p>
-      This function returns the index of the closest clock to the
-      frequency &s.code;freq&e.code; given (in kHz).  It assumes that
-      the number of clocks is greater than zero.  It requires that the
-      &s.code;numClocks&e.code; and &s.code;clock&e.code; fields of the
-      &s.code;ScrnInfoRec&e.code; are initialised.  The
-      &s.code;allowDiv2&e.code; field determines if the clocks can be
-      halved.  The &s.code;*divider&e.code; return value indicates
-      whether clock division is used when determining the clock returned.
-
-      This function is only for non-programmable clocks.
-
-    </quote>
-
-    &s.code;const char *xf86ModeStatusToString(ModeStatus status)&e.code;
-    <quote><p>
-      This function converts the &s.code;status&e.code; value to a
-      descriptive printable string.
-
-    </quote>
-
-    &s.code;ModeStatus xf86LookupMode(ScrnInfoPtr scrp, DisplayModePtr modep,
-		&f.indent;ClockRangePtr clockRanges, LookupModeFlags strategy)&e.code;
-    <quote><p>
-      This function takes a pointer to a mode with the name filled in,
-      and looks for a mode in the &s.code;modePool&e.code; list which
-      matches.  The parameters of the matching mode are filled in to
-      &s.code;*modep&e.code;.  The &s.code;clockRanges&e.code; and
-      &s.code;strategy&e.code; parameters are as for the
-      &s.code;xf86ValidateModes()&e.code; function above.
-
-      This function requires the &s.code;modePool&e.code;,
-      &s.code;clock[]&e.code;, &s.code;numClocks&e.code; and
-      &s.code;progClock&e.code; fields of the &s.code;ScrnInfoRec&e.code;
-      to be initialised before being called.
-
-      The return value is &s.code;MODE_OK&e.code; if a mode was found.
-      Otherwise it indicates why a matching mode could not be found.
-
-    </quote>
-
-    &s.code;ModeStatus xf86InitialCheckModeForDriver(ScrnInfoPtr scrp,
-		&f.indent;DisplayModePtr mode, ClockRangePtr clockRanges,
-		&f.indent;LookupModeFlags strategy, int maxPitch,
-		&f.indent;int virtualX, int virtualY)&e.code;
-    <quote><p>
-      This function checks the passed mode against some basic driver
-      constraints.  Apart from the ones passed explicitly, the
-      &s.code;maxHValue&e.code; and &s.code;maxVValue&e.code; fields of
-      the &s.code;ScrnInfoRec&e.code; are also used.  If the
-      &s.code;ValidMode&e.code; field of the &s.code;ScrnInfoRec&e.code;
-      is set, that function is also called to check the mode.  Next, the
-      mode is checked against the monitor's constraints.
-
-      If the mode is consistent with all constraints, the return value
-      is &s.code;MODE_OK&e.code;.  Otherwise the return value indicates
-      which constraint wasn't met.
-
-    </quote>
-
-    &s.code;void xf86DeleteMode(DisplayModePtr *modeList, DisplayModePtr mode)&e.code;
-    <quote><p>
-      This function deletes the &s.code;mode&e.code; given from the
-      &s.code;modeList&e.code;.  It never prints any messages, so it is
-      up to the caller to print a message if required.
-
-    </quote>
-  </quote>
-
-<sect1>Functions for handling strings and tokens
-<p>
-
-    Tables associating strings and numerical tokens combined with the
-    following functions provide a compact way of handling strings from
-    the config file, and for converting tokens into printable strings.
-    The table data structure is:
-
-<quote><verb>
-typedef struct {
-    int                 token;
-    const char *        name;
-} SymTabRec, *SymTabPtr;
-</verb></quote>
-
-    A table is an initialised array of &s.code;SymTabRec&e.code;.  The
-    tokens must be non-negative integers.  Multiple names may be mapped
-    to a single token.  The table is terminated with an element with a
-    &s.code;token&e.code; value of &s.code;-1&e.code; and
-    &s.code;NULL&e.code; for the &s.code;name&e.code;.
-
-
-  <quote><p>
-    &s.code;const char *xf86TokenToString(SymTabPtr table, int token)&e.code;
-    <quote><p>
-      This function returns the first string in &s.code;table&e.code;
-      that matches &s.code;token&e.code;.  If no match is found,
-      &s.code;NULL&e.code; is returned (NOTE, older versions of this
-      function would return the string "unknown" when no match is found).
-
-    </quote>
-
-    &s.code;int xf86StringToToken(SymTabPtr table, const char *string)&e.code;
-    <quote><p>
-      This function returns the first token in &s.code;table&e.code;
-      that matches &s.code;string&e.code;.  The
-      &s.code;xf86NameCmp()&e.code; function is used to determine the
-      match.  If no match is found, &s.code;-1&e.code; is returned.
-
-    </quote>
-  </quote>
-
-
-<sect1>Functions for finding which config file entries to use
-<p>
-
-    These functions can be used to select the appropriate config file
-    entries that match the detected hardware.  They are described above
-    in the <ref id="probe" name="Probe"> and
-    <ref id="avail" name="Available Functions"> sections.
-
-
-<sect1>Probing discrete clocks on old hardware
-<p>
-
-    The &s.code;xf86GetClocks()&e.code; function may be used to assist
-    in finding the discrete pixel clock values on older hardware.
-
-
-  <quote><p>
-    &s.code;void xf86GetClocks(ScrnInfoPtr pScrn, int num,
-		&f.indent;Bool (*ClockFunc)(ScrnInfoPtr, int),
-		&f.indent;void (*ProtectRegs)(ScrnInfoPtr, Bool),
-		&f.indent;void (*BlankScreen)(ScrnInfoPtr, Bool),
-		&f.indent;int vertsyncreg, int maskval, int knownclkindex,
-		&f.indent;int knownclkvalue)&e.code;
-    <quote><p>
-      This function uses a comparative sampling method to measure the
-      discrete pixel clock values.  The number of discrete clocks to
-      measure is given by &s.code;num&e.code;.  &s.code;clockFunc&e.code;
-      is a function that selects the &s.code;n&e.code;'th clock.  It
-      should also save or restore any state affected by programming the
-      clocks when the index passed is &s.code;CLK_REG_SAVE&e.code; or
-      &s.code;CLK_REG_RESTORE&e.code;.  &s.code;ProtectRegs&e.code; is
-      a function that does whatever is required to protect the hardware
-      state while selecting a new clock.  &s.code;BlankScreen&e.code;
-      is a function that blanks the screen.  &s.code;vertsyncreg&e.code;
-      and &s.code;maskval&e.code; are the register and bitmask to
-      check for the presence of vertical sync pulses.
-      &s.code;knownclkindex&e.code; and &s.code;knownclkvalue&e.code;
-      are the index and value of a known clock.  These are the known
-      references on which the comparative measurements are based.  The
-      number of clocks probed is set in &s.code;pScrn-&gt;numClocks&e.code;,
-      and the probed clocks are set in the &s.code;pScrn-&gt;clock[]&e.code;
-      array.  All of the clock values are in units of kHz.
-
-    </quote>
-
-    &s.code;void xf86ShowClocks(ScrnInfoPtr scrp, MessageType from)&e.code;
-    <quote><p>
-      Print out the pixel clocks &s.code;scrp-&gt;clock[]&e.code;.
-      &s.code;from&e.code; indicates whether the clocks were probed
-      or from the config file.
-
-    </quote>
-  </quote>
-
-<sect1>Other helper functions
-<p>
-  <quote><p>
-    &s.code;Bool xf86IsUnblank(int mode)&e.code;
-    <quote><p>
-      Returns &s.code;TRUE&e.code; when the screen saver mode specified
-      by &s.code;mode&e.code; requires the screen be unblanked,
-      and &s.code;FALSE&e.code; otherwise.  The screen saver modes that
-      require blanking are &s.code;SCREEN_SAVER_ON&e.code; and
-      &s.code;SCREEN_SAVER_CYCLE&e.code;, and the screen saver modes that
-      require unblanking are &s.code;SCREEN_SAVER_OFF&e.code; and
-      &s.code;SCREEN_SAVER_FORCER&e.code;.  Drivers may call this helper
-      from their &s.code;SaveScreen()&e.code; function to interpret the
-      screen saver modes.
-
-    </quote>
-  </quote>
-
-<sect>The vgahw module
-<p>
-
-The vgahw modules provides an interface for saving, restoring and
-programming the standard VGA registers, and for handling VGA colourmaps.
-
-<sect1>Data Structures
-<p>
-
-    The public data structures used by the vgahw module are
-    &s.code;vgaRegRec&e.code; and &s.code;vgaHWRec&e.code;.  They are
-    defined in &s.code;vgaHW.h.&e.code;
-
-
-<sect1>General vgahw Functions
-<p>
-
-  <quote><p>
-    &s.code;Bool vgaHWGetHWRec(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      This function allocates a &s.code;vgaHWRec&e.code; structure, and
-      hooks it into the &s.code;ScrnInfoRec&e.code;'s
-      &s.code;privates&e.code;.  Like all information hooked into the
-      &s.code;privates&e.code;, it is persistent, and only needs to be
-      allocated once per screen.  This function should normally be called
-      from the driver's &s.code;ChipPreInit()&e.code; function.  The
-      &s.code;vgaHWRec&e.code; is zero-allocated, and the following
-      fields are explicitly initialised:
-
-        &s.code;ModeReg.DAC[]&e.code;
-	<quote>initialised with a default colourmap</quote>
-        &s.code;ModeReg.Attribute[0x11]&e.code;
-	<quote>initialised with the default overscan index</quote>
-        &s.code;ShowOverscan&e.code;
-	<quote>initialised according to the "ShowOverscan" option</quote>
-        &s.code;paletteEnabled&e.code;
-	<quote>initialised to FALSE</quote>
-        &s.code;cmapSaved&e.code;
-	<quote>initialised to FALSE</quote>
-        &s.code;pScrn&e.code;
-	<quote>initialised to pScrn</quote>
-
-      In addition to the above, &s.code;vgaHWSetStdFuncs()&e.code; is
-      called to initialise the register access function fields with the
-      standard VGA set of functions.
-
-      Once allocated, a pointer to the &s.code;vgaHWRec&e.code; can be
-      obtained from the &s.code;ScrnInfoPtr&e.code; with the
-      &s.code;VGAHWPTR(pScrn)&e.code; macro.
-
-    </quote>
-
-    &s.code;void vgaHWFreeHWRec(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      This function frees a &s.code;vgaHWRec&e.code; structure.  It
-      should be called from a driver's &s.code;ChipFreeScreen()&e.code;
-      function.
-
-    </quote>
-
-    &s.code;Bool vgaHWSetRegCounts(ScrnInfoPtr pScrn, int numCRTC,
-		&f.indent;int numSequencer, int numGraphics, int numAttribute)&e.code;
-    <quote><p>
-      This function allows the number of CRTC, Sequencer, Graphics and
-      Attribute registers to be changed.  This makes it possible for
-      extended registers to be saved and restored with
-      &s.code;vgaHWSave()&e.code; and &s.code;vgaHWRestore()&e.code;.
-      This function should be called after a &s.code;vgaHWRec&e.code;
-      has been allocated with &s.code;vgaHWGetHWRec()&e.code;.  The
-      default values are defined in &s.code;vgaHW.h&e.code; as follows:
-
-      <quote><verb>
-#define VGA_NUM_CRTC 25
-#define VGA_NUM_SEQ   5
-#define VGA_NUM_GFX   9
-#define VGA_NUM_ATTR 21
-      </verb></quote>
-
-    </quote>
-
-    &s.code;Bool vgaHWCopyReg(vgaRegPtr dst, vgaRegPtr src)&e.code;
-    <quote><p>
-      This function copies the contents of the VGA saved registers in
-      &s.code;src&e.code; to &s.code;dst&e.code;.  Note that it isn't
-      possible to simply do this with &s.code;memcpy()&e.code; (or
-      similar).  This function returns &s.code;TRUE&e.code; unless there
-      is a problem allocating space for the &s.code;CRTC&e.code and
-      related fields in &s.code;dst&e.code;.
-
-    </quote>
-
-    &s.code;void vgaHWSetStdFuncs(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function initialises the register access function fields of
-      &s.code;hwp&e.code; with the standard VGA set of functions.  This
-      is called by &s.code;vgaHWGetHWRec()&e.code;, so there is usually
-      no need to call this explicitly.  The register access functions
-      are described below.  If the registers are shadowed in some other
-      port I/O space (for example a PCI I/O region), these functions
-      can be used to access the shadowed registers if
-      &s.code;hwp-&gt;PIOOffset&e.code; is initialised with
-      &s.code;offset&e.code;, calculated in such a way that when the
-      standard VGA I/O port value is added to it the correct offset into
-      the PIO area results.  This value is initialised to zero in
-      &s.code;vgaHWGetHWRec()&e.code;.  (Note: the PIOOffset functionality
-      is present in XFree86 4.1.0 and later.)
-
-    </quote>
-
-    &s.code;void vgaHWSetMmioFuncs(vgaHWPtr hwp, CARD8 *base, int offset)&e.code;
-    <quote><p>
-      This function initialised the register access function fields of
-      hwp with a generic MMIO set of functions.
-      &s.code;hwp-&gt;MMIOBase&e.code; is initialised with
-      &s.code;base&e.code;, which must be the virtual address that the
-      start of MMIO area is mapped to.  &s.code;hwp-&gt;MMIOOffset&e.code;
-      is initialised with &s.code;offset&e.code;, which must be calculated
-      in such a way that when the standard VGA I/O port value is added
-      to it the correct offset into the MMIO area results.  That means
-      that these functions are only suitable when the VGA I/O ports are
-      made available in a direct mapping to the MMIO space.  If that is
-      not the case, the driver will need to provide its own register
-      access functions.  The register access functions are described
-      below.
-
-    </quote>
-
-    &s.code;Bool vgaHWMapMem(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      This function maps the VGA memory window.  It requires that the
-      &s.code;vgaHWRec&e.code; be allocated.  If a driver requires
-      non-default &s.code;MapPhys&e.code; or &s.code;MapSize&e.code;
-      settings (the physical location and size of the VGA memory window)
-      then those fields of the &s.code;vgaHWRec&e.code; must be initialised
-      before calling this function.  Otherwise, this function initialiases
-      the default values of &s.code;0xA0000&e.code; for
-      &s.code;MapPhys&e.code; and &s.code;(64&nbsp;*&nbsp;1024)&e.code; for
-      &s.code;MapSize&e.code;.  This function must be called before
-      attempting to save or restore the VGA state.  If the driver doesn't
-      call it explicitly, the &s.code;vgaHWSave()&e.code; and
-      &s.code;vgaHWRestore()&e.code; functions may call it if they need
-      to access the VGA memory (in which case they will also call
-      &s.code;vgaHWUnmapMem()&e.code; to unmap the VGA memory before
-      exiting).
-
-    </quote>
-
-    &s.code;void vgaHWUnmapMem(ScrnInfoPtr pScrn)&e.code;
-    <quote><p>
-      This function unmaps the VGA memory window.  It must only be called
-      after the memory has been mapped.  The &s.code;Base&e.code; field
-      of the &s.code;vgaHWRec&e.code; field is set to &s.code;NULL&e.code;
-      to indicate that the memory is no longer mapped.
-
-    </quote>
-
-    &s.code;void vgaHWGetIOBase(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function initialises the &s.code;IOBase&e.code; field of the
-      &s.code;vgaHWRec&e.code;.  This function must be called before
-      using any other functions that access the video hardware.
-
-      A macro &s.code;VGAHW_GET_IOBASE()&e.code; is also available in
-      &s.code;vgaHW.h&e.code; that returns the I/O base, and this may
-      be used when the vgahw module is not loaded (for example, in the
-      &s.code;ChipProbe()&e.code; function).
-
-    </quote>
-
-    &s.code;void vgaHWUnlock(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function unlocks the VGA &s.code;CRTC[0-7]&e.code; registers,
-      and must be called before attempting to write to those registers.
-
-    </quote>
-
-    &s.code;void vgaHWLock(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function locks the VGA &s.code;CRTC[0-7]&e.code; registers.
-
-    </quote>
-
-    &s.code;void vgaHWEnable(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function enables the VGA subsystem.  (Note, this function is
-      present in XFree86 4.1.0 and later.).
-
-    </quote>
-
-    &s.code;void vgaHWDisable(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      This function disables the VGA subsystem.  (Note, this function is
-      present in XFree86 4.1.0 and later.).
-
-    </quote>
-
-    &s.code;void vgaHWSave(ScrnInfoPtr pScrn, vgaRegPtr save, int flags)&e.code;
-    <quote><p>
-      This function saves the VGA state.  The state is written to the
-      &s.code;vgaRegRec&e.code; pointed to by &s.code;save&e.code;.
-      &s.code;flags&e.code; is set to one or more of the following flags
-      ORed together:
-
-        &s.code;VGA_SR_MODE&e.code;
-	<quote>the mode setting registers are saved</quote>
-        &s.code;VGA_SR_FONTS&e.code;
-	<quote>the text mode font/text data is saved</quote>
-        &s.code;VGA_SR_CMAP&e.code;
-	<quote>the colourmap (LUT) is saved</quote>
-        &s.code;VGA_SR_ALL&e.code;
-	<quote>all of the above are saved</quote>
-
-      The &s.code;vgaHWRec&e.code; and its &s.code;IOBase&e.code; fields
-      must be initialised before this function is called.  If
-      &s.code;VGA_SR_FONTS&e.code; is set in &s.code;flags&e.code;, the
-      VGA memory window must be mapped.  If it isn't then
-      &s.code;vgaHWMapMem()&e.code; will be called to map it, and
-      &s.code;vgaHWUnmapMem()&e.code; will be called to unmap it
-      afterwards.  &s.code;vgaHWSave()&e.code; uses the three functions
-      below in the order &s.code;vgaHWSaveColormap()&e.code;,
-      &s.code;vgaHWSaveMode()&e.code;, &s.code;vgaHWSaveFonts()&e.code; to
-      carry out the different save phases.  It is undecided at this
-      stage whether they will remain part of the vgahw module's public
-      interface or not.
-
-    </quote>
-
-    &s.code;void vgaHWSaveMode(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;
-    <quote><p>
-      This function saves the VGA mode registers.  They are saved to
-      the &s.code;vgaRegRec&e.code; pointed to by &s.code;save&e.code;.
-      The registers saved are:
-
-	<quote>
-        &s.code;MiscOut&nl;
-        CRTC[0-0x18]&nl;
-        Attribute[0-0x14]&nl;
-        Graphics[0-8]&nl;
-        Sequencer[0-4]&e.code;
-	</quote>
-
-    The number of registers actually saved may be modified by a prior call
-    to &s.code;vgaHWSetRegCounts()&e.code;.
-
-    </quote>
-
-    &s.code;void vgaHWSaveFonts(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;
-    <quote><p>
-      This function saves the text mode font and text data held in the
-      video memory.  If called while in a graphics mode, no save is
-      done.  The VGA memory window must be mapped with
-      &s.code;vgaHWMapMem()&e.code; before to calling this function.
-
-      On some platforms, one or more of the font/text plane saves may be
-      no-ops.  This is the case when the platform's VC driver already
-      takes care of this.
-
-    </quote>
-
-    &s.code;void vgaHWSaveColormap(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;
-    <quote><p>
-      This function saves the VGA colourmap (LUT).  Before saving it, it
-      attempts to verify that the colourmap is readable.  In rare cases
-      where it isn't readable, a default colourmap is saved instead.
-
-    </quote>
-
-    &s.code;void vgaHWRestore(ScrnInfoPtr pScrn, vgaRegPtr restore, int flags)&e.code;
-    <quote><p>
-      This function programs the VGA state.  The state programmed is
-      that contained in the &s.code;vgaRegRec&e.code; pointed to by
-      &s.code;restore&e.code;.  &s.code;flags&e.code; is the same
-      as described above for the &s.code;vgaHWSave()&e.code; function.
-
-      The &s.code;vgaHWRec&e.code; and its &s.code;IOBase&e.code; fields
-      must be initialised before this function is called.  If
-      &s.code;VGA_SR_FONTS&e.code; is set in &s.code;flags&e.code;, the
-      VGA memory window must be mapped.  If it isn't then
-      &s.code;vgaHWMapMem()&e.code; will be called to map it, and
-      &s.code;vgaHWUnmapMem()&e.code; will be called to unmap it
-      afterwards.  &s.code;vgaHWRestore()&e.code; uses the three functions
-      below in the order &s.code;vgaHWRestoreFonts()&e.code;,
-      &s.code;vgaHWRestoreMode()&e.code;,
-      &s.code;vgaHWRestoreColormap()&e.code; to carry out the different
-      restore phases.  It is undecided at this stage whether they will
-      remain part of the vgahw module's public interface or not.
-
-    </quote>
-
-    &s.code;void vgaHWRestoreMode(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;
-    <quote><p>
-      This function restores the VGA mode registers.  They are restored
-      from the data in the &s.code;vgaRegRec&e.code; pointed to by
-      &s.code;restore&e.code;.  The registers restored are:
-
-	<quote>
-        &s.code;MiscOut&nl;
-        CRTC[0-0x18]&nl;
-        Attribute[0-0x14]&nl;
-        Graphics[0-8]&nl;
-        Sequencer[0-4]&e.code;
-	</quote>
-
-    The number of registers actually restored may be modified by a prior call
-    to &s.code;vgaHWSetRegCounts()&e.code;.
-
-    </quote>
-
-    &s.code;void vgaHWRestoreFonts(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;
-    <quote><p>
-      This function restores the text mode font and text data to the
-      video memory.  The VGA memory window must be mapped with
-      &s.code;vgaHWMapMem()&e.code; before to calling this function.
-
-      On some platforms, one or more of the font/text plane restores
-      may be no-ops.  This is the case when the platform's VC driver
-      already takes care of this.
-
-    </quote>
-
-    &s.code;void vgaHWRestoreColormap(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;
-    <quote><p>
-      This function restores the VGA colourmap (LUT).
-
-    </quote>
-
-    &s.code;void vgaHWInit(ScrnInfoPtr pScrn, DisplayModePtr mode)&e.code;
-    <quote><p>
-      This function fills in the &s.code;vgaHWRec&e.code;'s
-      &s.code;ModeReg&e.code; field with the values appropriate for
-      programming the given video mode.  It requires that the
-      &s.code;ScrnInfoRec&e.code;'s &s.code;depth&e.code; field is
-      initialised, which determines how the registers are programmed.
-
-    </quote>
-
-    &s.code;void vgaHWSeqReset(vgaHWPtr hwp, Bool start)&e.code;
-    <quote><p>
-      Do a VGA sequencer reset.  If start is &s.code;TRUE&e.code;, the
-      reset is started.  If start is &s.code;FALSE&e.code;, the reset
-      is ended.
-
-    </quote>
-
-    &s.code;void vgaHWProtect(ScrnInfoPtr pScrn, Bool on)&e.code;
-    <quote><p>
-      This function protects VGA registers and memory from corruption
-      during loads.  It is typically called with on set to
-      &s.code;TRUE&e.code; before programming, and with on set to
-      &s.code;FALSE&e.code; after programming.
-
-    </quote>
-
-    &s.code;Bool vgaHWSaveScreen(ScreenPtr pScreen, int mode)&e.code;
-    <quote><p>
-      This function blanks and unblanks the screen.  It is blanked when
-      &s.code;mode&e.code; is &s.code;SCREEN_SAVER_ON&e.code; or
-      &s.code;SCREEN_SAVER_CYCLE&e.code;, and unblanked when
-      &s.code;mode&e.code; is &s.code;SCREEN_SAVER_OFF&e.code; or
-      &s.code;SCREEN_SAVER_FORCER&e.code;.
-
-    </quote>
-
-    &s.code;void vgaHWBlankScreen(ScrnInfoPtr pScrn, Bool on)&e.code;
-    <quote><p>
-      This function blanks and unblanks the screen.  It is blanked when
-      &s.code;on&e.code; is &s.code;FALSE&e.code;, and unblanked when
-      &s.code;on&e.code; is &s.code;TRUE&e.code;.  This function is
-      provided for use in cases where the &s.code;ScrnInfoRec&e.code;
-      can't be derived from the &s.code;ScreenRec&e.code; (while probing
-      for clocks, for example).
-
-    </quote>
-  </quote>
-
-<sect1>VGA Colormap Functions
-<p>
-
-    The vgahw module uses the standard colormap support (see the
-    <ref id="cmap" name="Colormap Handling"> section.  This is initialised
-    with the following function:
-
-  <quote>
-      &s.code;Bool vgaHWHandleColormaps(ScreenPtr pScreen)&e.code;
-  </quote>
-
-
-<sect1>VGA Register Access Functions
-<p>
-
-    The vgahw module abstracts access to the standard VGA registers by
-    using a set of functions held in the &s.code;vgaHWRec&e.code;.  When
-    the &s.code;vgaHWRec&e.code; is created these function pointers are
-    initialised with the set of standard VGA I/O register access functions.
-    In addition to these, the vgahw module includes a basic set of MMIO
-    register access functions, and the &s.code;vgaHWRec&e.code; function
-    pointers can be initialised to these by calling the
-    &s.code;vgaHWSetMmioFuncs()&e.code; function described above.  Some
-    drivers/platforms may require a different set of functions for VGA
-    access.  The access functions are described here.
-
-
-  <quote><p>
-    &s.code;void writeCrtc(vgaHWPtr hwp, CARD8 index, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to CRTC register &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;CARD8 readCrtc(vgaHWPtr hwp, CARD8 index)&e.code;
-    <quote><p>
-      Return the value read from CRTC register &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;void writeGr(vgaHWPtr hwp, CARD8 index, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to Graphics Controller register
-      &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;CARD8 readGR(vgaHWPtr hwp, CARD8 index)&e.code;
-    <quote><p>
-      Return the value read from Graphics Controller register
-      &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;void writeSeq(vgaHWPtr hwp, CARD8 index, CARD8, value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to Sequencer register
-      &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;CARD8 readSeq(vgaHWPtr hwp, CARD8 index)&e.code;
-    <quote><p>
-      Return the value read from Sequencer register &s.code;index&e.code;.
-
-    </quote>
-
-    &s.code;void writeAttr(vgaHWPtr hwp, CARD8 index, CARD8, value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to Attribute Controller register
-      &s.code;index&e.code;.  When writing out the index value this
-      function should set bit 5 (&s.code;0x20&e.code;) according to the
-      setting of &s.code;hwp-&gt;paletteEnabled&e.code; in order to
-      preserve the palette access state.  It should be cleared when
-      &s.code;hwp-&gt;paletteEnabled&e.code; is &s.code;TRUE&e.code;
-      and set when it is &s.code;FALSE&e.code;.
-
-    </quote>
-
-    &s.code;CARD8 readAttr(vgaHWPtr hwp, CARD8 index)&e.code;
-    <quote><p>
-      Return the value read from Attribute Controller register
-      &s.code;index&e.code;.  When writing out the index value this
-      function should set bit 5 (&s.code;0x20&e.code;) according to the
-      setting of &s.code;hwp-&gt;paletteEnabled&e.code; in order to
-      preserve the palette access state.  It should be cleared when
-      &s.code;hwp-&gt;paletteEnabled&e.code; is &s.code;TRUE&e.code;
-      and set when it is &s.code;FALSE&e.code;.
-
-    </quote>
-
-    &s.code;void writeMiscOut(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write `&s.code;value&e.code;' to the Miscellaneous Output register.
-
-    </quote>
-
-    &s.code;CARD8 readMiscOut(vgwHWPtr hwp)&e.code;
-    <quote><p>
-      Return the value read from the Miscellaneous Output register.
-
-    </quote>
-
-    &s.code;void enablePalette(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      Clear the palette address source bit in the Attribute Controller
-      index register and set &s.code;hwp-&gt;paletteEnabled&e.code; to
-      &s.code;TRUE&e.code;.
-
-    </quote>
-
-    &s.code;void disablePalette(vgaHWPtr hwp)&e.code;
-    <quote><p>
-      Set the palette address source bit in the Attribute Controller
-      index register and set &s.code;hwp-&gt;paletteEnabled&e.code; to
-      &s.code;FALSE&e.code;.
-
-    </quote>
-
-    &s.code;void writeDacMask(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to the DAC Mask register.
-
-    </quote>
-
-    &s.code;CARD8 readDacMask(vgaHWptr hwp)&e.code;
-    <quote><p>
-      Return the value read from the DAC Mask register.
-
-    </quote>
-
-    &s.code;void writeDacReadAddress(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to the DAC Read Address register.
-
-    </quote>
-
-    &s.code;void writeDacWriteAddress(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to the DAC Write Address register.
-
-    </quote>
-
-    &s.code;void writeDacData(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to the DAC Data register.
-
-    </quote>
-
-    &s.code;CARD8 readDacData(vgaHWptr hwp)&e.code;
-    <quote><p>
-      Return the value read from the DAC Data register.
-
-    </quote>
-
-    &s.code;CARD8 readEnable(vgaHWptr hwp)&e.code;
-    <quote><p>
-      Return the value read from the VGA Enable register.  (Note: This
-      function is present in XFree86 4.1.0 and later.)
-
-    </quote>
-
-    &s.code;void writeEnable(vgaHWPtr hwp, CARD8 value)&e.code;
-    <quote><p>
-      Write &s.code;value&e.code; to the VGA Enable register.  (Note: This
-      function is present in XFree86 4.1.0 and later.)
-
-    </quote>
-  </quote>
-
-<sect>Some notes about writing a driver<label id="sample">
-<p>
-
-<em>NOTE: some parts of this are not up to date</em>
-
-The following is an outline for writing a basic unaccelerated driver
-for a PCI video card with a linear mapped framebuffer, and which has a
-VGA core.  It is includes some general information that is relevant to
-most drivers (even those which don't fit that basic description).
-
-The information here is based on the initial conversion of the Matrox
-Millennium driver to the ``new design''.  For a fleshing out and sample
-implementation of some of the bits outlined here, refer to that driver.
-Note that this is an example only.  The approach used here will not be
-appropriate for all drivers.
-
-Each driver must reserve a unique driver name, and a string that is used
-to prefix all of its externally visible symbols.  This is to avoid name
-space clashes when loading multiple drivers.  The examples here are for
-the ``ZZZ'' driver, which uses the ``ZZZ'' or ``zzz'' prefix for its externally
-visible symbols.
-
-
-<sect1>Include files
-<p>
-
-  All drivers normally include the following headers:
-  <quote>
-    &s.code;"xf86.h"&nl;
-    "xf86_OSproc.h"&nl;
-    "xf86_ansic.h"&nl;
-    "xf86Resources.h"&e.code;
-  </quote>
-  Wherever inb/outb (and related things) are used the following should be
-  included:
-  <quote>
-    &s.code;"compiler.h"&e.code;
-  </quote>
-  Note: in drivers, this must be included after &s.code;"xf86_ansic.h"&e.code;.
-
-  Drivers that need to access PCI vendor/device definitions need this:
-  <quote>
-    &s.code;"xf86PciInfo.h"&e.code;
-  </quote>
-
-  Drivers that need to access the PCI config space need this:
-  <quote>
-    &s.code;"xf86Pci.h"&e.code;
-  </quote>
-
-  Drivers using the mi banking wrapper need:
-
-  <quote>
-    &s.code;"mibank.h"&e.code;
-  </quote>
-
-  Drivers that initialise a SW cursor need this:
-  <quote>
-    &s.code;"mipointer.h"&e.code;
-  </quote>
-
-  All drivers implementing backing store need this:
-  <quote>
-    &s.code;"mibstore.h"&e.code;
-  </quote>
-
-  All drivers using the mi colourmap code need this:
-  <quote>
-    &s.code;"micmap.h"&e.code;
-  </quote>
-
-  If a driver uses the vgahw module, it needs this:
-  <quote>
-    &s.code;"vgaHW.h"&e.code;
-  </quote>
-
-  Drivers supporting VGA or Hercules monochrome screens need:
-  <quote>
-    &s.code;"xf1bpp.h"&e.code;
-  </quote>
-
-  Drivers supporting VGA or EGC 16-colour screens need:
-  <quote>
-    &s.code;"xf4bpp.h"&e.code;
-  </quote>
-
-  Drivers using cfb need:
-  <quote>
-    &s.code;#define PSZ 8&nl;
-    #include "cfb.h"&nl;
-    #undef PSZ&e.code;
-  </quote>
-
-  Drivers supporting bpp 16, 24 or 32 with cfb need one or more of:
-  <quote>
-    &s.code;"cfb16.h"&nl;
-    "cfb24.h"&nl;
-    "cfb32.h"&e.code;
-  </quote>
-
-  The driver's own header file:
-  <quote>
-    &s.code;"zzz.h"&e.code;
-  </quote>
-
-  Drivers must NOT include the following:
-
- <quote>
-    &s.code;"xf86Priv.h"&nl;
-    "xf86Privstr.h"&nl;
-    "xf86_libc.h"&nl;
-    "xf86_OSlib.h"&nl;
-    "Xos.h"&e.code;&nl;
-    any OS header
- </quote>
-
-
-<sect1>Data structures and initialisation
-<p>
-
-<itemize>
-  <item>The following macros should be defined:
-    <code>
-#define VERSION <version-as-an-int>
-#define ZZZ_NAME "ZZZ"         /* the name used to prefix messages */
-#define ZZZ_DRIVER_NAME "zzz"  /* the driver name as used in config file */
-#define ZZZ_MAJOR_VERSION <int>
-#define ZZZ_MINOR_VERSION <int>
-#define ZZZ_PATCHLEVEL    <int>
-    </code>
-<p>
-    NOTE: &s.code;ZZZ_DRIVER_NAME&e.code; should match the name of the
-    driver module without things like the "lib" prefix, the "_drv" suffix
-    or filename extensions.
-<p>
-
-  <item>A DriverRec must be defined, which includes the functions required
-    at the pre-probe phase.  The name of this DriverRec must be an
-    upper-case version of ZZZ_DRIVER_NAME (for the purposes of static
-    linking).
-<p>
-    <code>
-DriverRec ZZZ = {
-    VERSION,
-    ZZZ_DRIVER_NAME,
-    ZZZIdentify,
-    ZZZProbe,
-    ZZZAvailableOptions,
-    NULL,
-    0
-};
-    </code>
-
-  <item>Define list of supported chips and their matching ID:
-<p>
-    <code>
-static SymTabRec ZZZChipsets[] = {
-    { PCI_CHIP_ZZZ1234, "zzz1234a" },
-    { PCI_CHIP_ZZZ5678, "zzz5678a" },
-    { -1,               NULL }
-};
-    </code>
-<p>
-    The token field may be any integer value that the driver may use to
-    uniquely identify the supported chipsets.  For drivers that support
-    only PCI devices using the PCI device IDs might be a natural choice,
-    but this isn't mandatory.  For drivers that support both PCI and other
-    devices (like ISA), some other ID should probably used.  When other
-    IDs are used as the tokens it is recommended that the names be
-    defined as an &s.code;enum&e.code; type.
-<p>
-  <item>If the driver uses the &s.code;xf86MatchPciInstances(&e.code;)
-    helper (recommended for drivers that support PCI cards) a list that
-    maps PCI IDs to chip IDs and fixed resources must be defined:
-<p>
-    <code>
-static PciChipsets ZZZPciChipsets[] = {
-    { PCI_CHIP_ZZZ1234, PCI_CHIP_ZZZ1234, RES_SHARED_VGA },
-    { PCI_CHIP_ZZZ5678, PCI_CHIP_ZZZ5678, RES_SHARED_VGA },
-    { -1,               -1,               RES_UNDEFINED }
-}
-    </code>
-<p>
-  <item>Define the &s.code;XF86ModuleVersionInfo&e.code; struct for the
-    driver.  This is required for the dynamically loaded version:
-<p>
-    <code>
-static XF86ModuleVersionInfo zzzVersRec =
-{
-    "zzz",
-    MODULEVENDORSTRING,
-    MODINFOSTRING1,
-    MODINFOSTRING2,
-    XF86_VERSION_CURRENT,
-    ZZZ_MAJOR_VERSION, ZZZ_MINOR_VERSION, ZZZ_PATCHLEVEL,
-    ABI_CLASS_VIDEODRV,
-    ABI_VIDEODRV_VERSION,
-    MOD_CLASS_VIDEODRV,
-    {0,0,0,0}
-};
-    </code>
-<p>
-  <item>Define a data structure to hold the driver's screen-specific data.
-    This must be used instead of global variables.  This would be defined
-    in the &s.code;"zzz.h"&e.code; file, something like:
-<p>
-    <code>
-typedef struct {
-    type1  field1;
-    type2  field2;
-    int    fooHack;
-    Bool   pciRetry;
-    Bool   noAccel;
-    Bool   hwCursor;
-    CloseScreenProcPtr CloseScreen;
-    OptionInfoPtr Options;
-    ...
-} ZZZRec, *ZZZPtr;
-    </code>
-<p>
-  <item>Define the list of config file Options that the driver accepts.  For
-    consistency between drivers those in the list of ``standard'' options
-    should be used where appropriate before inventing new options.
-<p>
-    <code>
-typedef enum {
-    OPTION_FOO_HACK,
-    OPTION_PCI_RETRY,
-    OPTION_HW_CURSOR,
-    OPTION_NOACCEL
-} ZZZOpts;
-
-static const OptionInfoRec ZZZOptions[] = {
-  { OPTION_FOO_HACK,  "FooHack",   OPTV_INTEGER, {0}, FALSE },
-  { OPTION_PCI_RETRY, "PciRetry",  OPTV_BOOLEAN, {0}, FALSE },
-  { OPTION_HW_CURSOR, "HWcursor",  OPTV_BOOLEAN, {0}, FALSE },
-  { OPTION_NOACCEL,   "NoAccel",   OPTV_BOOLEAN, {0}, FALSE },
-  { -1,               NULL,        OPTV_NONE,    {0}, FALSE }
-};
-    </code>
-<p>
-</itemize>
-
-<sect1>Functions
-<p>
-
-
-<sect2>SetupProc
-<p>
-
-    For dynamically loaded modules, a &s.code;ModuleData&e.code;
-    variable is required.  It is should be the name of the driver
-    prepended to "ModuleData".  A &s.code;Setup()&e.code; function is
-    also required, which calls &s.code;xf86AddDriver()&e.code; to add
-    the driver to the main list of drivers.
-
-    <code>
-static MODULESETUPPROTO(zzzSetup);
-
-XF86ModuleData zzzModuleData = { &amp;zzzVersRec, zzzSetup, NULL };
-
-static pointer
-zzzSetup(pointer module, pointer opts, int *errmaj, int *errmin)
-{
-    static Bool setupDone = FALSE;
-
-    /* This module should be loaded only once, but check to be sure. */
-
-    if (!setupDone) {
-        /*
-         * Modules that this driver always requires may be loaded
-         * here  by calling LoadSubModule().
-         */
-
-        setupDone = TRUE;
-        xf86AddDriver(&amp;MGA, module, 0);
-
-        /*
-         * The return value must be non-NULL on success even though
-         * there is no TearDownProc.
-         */
-        return (pointer)1;
-    } else {
-        if (errmaj) *errmaj = LDR_ONCEONLY;
-        return NULL;
-    }
-}
-    </code>
-
-<sect2>GetRec, FreeRec
-<p>
-
-    A function is usually required to allocate the driver's
-    screen-specific data structure and hook it into the
-    &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field.
-    The &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; is
-    initialised to &s.code;NULL&e.code;, so it is easy to check if the
-    initialisation has already been done.  After allocating it, initialise
-    the fields.  By using &s.code;xnfcalloc()&e.code; to do the allocation
-    it is zeroed, and if the allocation fails the server exits.
-<p>
-    NOTE:
-    When allocating structures from inside the driver which are defined
-    on the common level it is important to initialize the structure to
-    zero.
-    Only this guarantees that the server remains source compatible to
-    future changes in common level structures.
-
-    <code>
-static Bool
-ZZZGetRec(ScrnInfoPtr pScrn)
-{
-    if (pScrn->driverPrivate != NULL)
-        return TRUE;
-    pScrn->driverPrivate = xnfcalloc(sizeof(ZZZRec), 1);
-    /* Initialise as required */
-    ...
-    return TRUE;
-}
-    </code>
-
-    Define a macro in &s.code;"zzz.h"&e.code; which gets a pointer to
-    the &s.code;ZZZRec&e.code; when given &s.code;pScrn&e.code;:
-
-    <code>
-#define ZZZPTR(p) ((ZZZPtr)((p)->driverPrivate))
-    </code>
-
-    Define a function to free the above, setting it to &s.code;NULL&e.code;
-    once it has been freed:
-
-    <code>
-static void
-ZZZFreeRec(ScrnInfoPtr pScrn)
-{
-    if (pScrn->driverPrivate == NULL)
-        return;
-    xfree(pScrn->driverPrivate);
-    pScrn->driverPrivate = NULL;
-}
-    </code>
-
-<sect2>Identify
-<p>
-
-    Define the &s.code;Identify()&e.code; function.  It is run before
-    the Probe, and typically prints out an identifying message, which
-    might include the chipsets it supports.  This function is mandatory:
-
-    <code>
-static void
-ZZZIdentify(int flags)
-{
-    xf86PrintChipsets(ZZZ_NAME, "driver for ZZZ Tech chipsets",
-                      ZZZChipsets);
-}
-    </code>
-
-<sect2>Probe
-<p>
-
-    Define the &s.code;Probe()&e.code; function.  The purpose of this
-    is to find all instances of the hardware that the driver supports,
-    and for the ones not already claimed by another driver, claim the
-    slot, and allocate a &s.code;ScrnInfoRec&e.code;.  This should be
-    a minimal probe, and it should under no circumstances leave the
-    state of the hardware changed.  Because a device is found, don't
-    assume that it will be used.  Don't do any initialisations other
-    than the required &s.code;ScrnInfoRec&e.code; initialisations.
-    Don't allocate any new data structures.
-
-    This function is mandatory.
-
-    NOTE: The &s.code;xf86DrvMsg()&e.code; functions cannot be used from
-    the Probe.
-
-    <code>
-static Bool
-ZZZProbe(DriverPtr drv, int flags)
-{
-    Bool foundScreen = FALSE;
-    int numDevSections, numUsed;
-    GDevPtr *devSections;
-    int *usedChips;
-    int i;
-
-    /*
-     * Find the config file Device sections that match this
-     * driver, and return if there are none.
-     */
-    if ((numDevSections = xf86MatchDevice(ZZZ_DRIVER_NAME,
-                                          &amp;devSections)) <= 0) {
-        return FALSE;
-    }
-
-    /*
-     * Since this is a PCI card, "probing" just amounts to checking
-     * the PCI data that the server has already collected.  If there
-     * is none, return.
-     *
-     * Although the config file is allowed to override things, it
-     * is reasonable to not allow it to override the detection
-     * of no PCI video cards.
-     *
-     * The provided xf86MatchPciInstances() helper takes care of
-     * the details.
-     */
-    /* test if PCI bus present */
-    if (xf86GetPciVideoInfo()) {
-
-        numUsed = xf86MatchPciInstances(ZZZ_NAME, PCI_VENDOR_ZZZ,
-                            ZZZChipsets, ZZZPciChipsets, devSections,
-                            numDevSections, drv, &amp;usedChips);
-
-        for (i = 0; i < numUsed; i++) {
-            ScrnInfoPtr pScrn = NULL;
-            if ((pScrn = xf86ConfigPciEntity(pScrn, flags, usedChips[i],
-                                             ZZZPciChipsets, NULL, NULL,
-                                             NULL, NULL, NULL))) {
-               /* Allocate a ScrnInfoRec */
-               pScrn->driverVersion = VERSION;
-               pScrn->driverName    = ZZZ_DRIVER_NAME;
-               pScrn->name          = ZZZ_NAME;
-               pScrn->Probe         = ZZZProbe;
-               pScrn->PreInit       = ZZZPreInit;
-               pScrn->ScreenInit    = ZZZScreenInit;
-               pScrn->SwitchMode    = ZZZSwitchMode;
-               pScrn->AdjustFrame   = ZZZAdjustFrame;
-               pScrn->EnterVT       = ZZZEnterVT;
-               pScrn->LeaveVT       = ZZZLeaveVT;
-               pScrn->FreeScreen    = ZZZFreeScreen;
-               pScrn->ValidMode     = ZZZValidMode;
-               foundScreen = TRUE;
-               /* add screen to entity */
-           }
-        }
-        xfree(usedChips);
-    }
-
-#ifdef HAS_ISA_DEVS
-    /*
-     * If the driver supports ISA hardware, the following block
-     * can be included too.
-     */
-    numUsed = xf86MatchIsaInstances(ZZZ_NAME, ZZZChipsets,
-                             ZZZIsaChipsets, drv, ZZZFindIsaDevice,
-                             devSections, numDevSections, &amp;usedChips);
-    for (i = 0; i < numUsed; i++) {
-        ScrnInfoPtr pScrn = NULL;
-	if ((pScrn = xf86ConfigIsaEntity(pScrn, flags, usedChips[i],
-					 ZZZIsaChipsets, NULL, NULL, NULL,
-					 NULL, NULL))) {
-            pScrn->driverVersion = VERSION;
-            pScrn->driverName    = ZZZ_DRIVER_NAME;
-            pScrn->name          = ZZZ_NAME;
-            pScrn->Probe         = ZZZProbe;
-            pScrn->PreInit       = ZZZPreInit;
-            pScrn->ScreenInit    = ZZZScreenInit;
-            pScrn->SwitchMode    = ZZZSwitchMode;
-            pScrn->AdjustFrame   = ZZZAdjustFrame;
-            pScrn->EnterVT       = ZZZEnterVT;
-            pScrn->LeaveVT       = ZZZLeaveVT;
-            pScrn->FreeScreen    = ZZZFreeScreen;
-            pScrn->ValidMode     = ZZZValidMode;
-            foundScreen = TRUE;
-        }
-    }
-    xfree(usedChips);
-#endif /* HAS_ISA_DEVS */
-
-    xfree(devSections);
-    return foundScreen;
-    </code>
-
-<sect2>AvailableOptions
-<p>
-
-    Define the &s.code;AvailableOptions()&e.code; function. The purpose
-    of this is to return the available driver options back to the
-    -configure option, so that an xorg.conf file can be built and the
-    user can see which options are available for them to use.
-
-<sect2>PreInit
-<p>
-
-    Define the &s.code;PreInit()&e.code; function.  The purpose of
-    this is to find all the information required to determine if the
-    configuration is usable, and to initialise those parts of the
-    &s.code;ScrnInfoRec&e.code; that can be set once at the beginning
-    of the first server generation.  The information should be found in
-    the least intrusive way possible.
-
-    This function is mandatory.
-
-    NOTES:
-    <enum>
-      <item>The &s.code;PreInit()&e.code; function is only called once
-	 during the life of the X server (at the start of the first
-	 generation).
-
-      <item>Data allocated here must be of the type that persists for
-	 the life of the X server.  This means that data that hooks into
-	 the &s.code;ScrnInfoRec&e.code;'s &s.code;privates&e.code;
-	 field should be allocated here, but data that hooks into the
-	 &s.code;ScreenRec&e.code;'s &s.code;devPrivates&e.code; field
-	 should not be allocated here.  The &s.code;driverPrivate&e.code;
-	 field should also be allocated here.
-
-      <item>Although the &s.code;ScrnInfoRec&e.code; has been allocated
-	 before this function is called, the &s.code;ScreenRec&e.code;
-	 has not been allocated.  That means that things requiring it
-	 cannot be used in this function.
-
-      <item>Very little of the &s.code;ScrnInfoRec&e.code; has been
-	 initialised when this function is called.  It is important to
-	 get the order of doing things right in this function.
-
-    </enum>
-
-    <code>
-static Bool
-ZZZPreInit(ScrnInfoPtr pScrn, int flags)
-{
-    /* Fill in the monitor field */
-    pScrn->monitor = pScrn->confScreen->monitor;
-
-    /*
-     * If using the vgahw module, it will typically be loaded
-     * here by calling xf86LoadSubModule(pScrn, "vgahw");
-     */
-
-    /*
-     * Set the depth/bpp.  Use the globally preferred depth/bpp.  If the
-     * driver has special default depth/bpp requirements, the defaults should
-     * be specified here explicitly.
-     * We support both 24bpp and 32bpp framebuffer layouts.
-     * This sets pScrn->display also.
-     */
-    if (!xf86SetDepthBpp(pScrn, 0, 0, 0,
-                         Support24bppFb | Support32bppFb)) {
-        return FALSE;
-    } else {
-        if (depth/bpp isn't one we support) {
-            print error message;
-            return FALSE;
-        }
-    }
-    /* Print out the depth/bpp that was set */
-    xf86PrintDepthBpp(pScrn);
-
-    /* Set bits per RGB for 8bpp */
-    if (pScrn->depth <= 8) {
-        /* Take into account a dac_6_bit option here */
-        pScrn->rgbBits = 6 or 8;
-    }
-
-    /*
-     * xf86SetWeight() and xf86SetDefaultVisual() must be called
-     * after pScrn->display is initialised.
-     */
-
-    /* Set weight/mask/offset for depth > 8 */
-    if (pScrn->depth > 8) {
-        if (!xf86SetWeight(pScrn, defaultWeight, defaultMask)) {
-            return FALSE;
-        } else {
-            if (weight isn't one we support) {
-                print error message;
-                return FALSE;
-            }
-        }
-    }
-
-    /* Set the default visual. */
-    if (!xf86SetDefaultVisual(pScrn, -1)) {
-        return FALSE;
-    } else {
-        if (visual isn't one we support) {
-            print error message;
-            return FALSE;
-        }
-    }
-
-    /* If the driver supports gamma correction, set the gamma. */
-    if (!xf86SetGamma(pScrn, default_gamma)) {
-        return FALSE;
-    }
-
-    /* This driver uses a programmable clock */
-    pScrn->progClock = TRUE;
-
-    /* Allocate the ZZZRec driverPrivate */
-    if (!ZZZGetRec(pScrn)) {
-        return FALSE;
-    }
-
-    pZzz = ZZZPTR(pScrn);
-
-    /* Collect all of the option flags (fill in pScrn->options) */
-    xf86CollectOptions(pScrn, NULL);
-
-    /*
-     * Process the options based on the information in ZZZOptions.
-     * The results are written to pZzz->Options.  If all of the options
-     * processing is done within this function a local variable "options"
-     * can be used instead of pZzz->Options.
-     */
-    if (!(pZzz->Options = xalloc(sizeof(ZZZOptions))))
-        return FALSE;
-    (void)memcpy(pZzz->Options, ZZZOptions, sizeof(ZZZOptions));
-    xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pZzz->Options);
-
-    /*
-     * Set various fields of ScrnInfoRec and/or ZZZRec based on
-     * the options found.
-     */
-    from = X_DEFAULT;
-    pZzz->hwCursor = FALSE;
-    if (xf86IsOptionSet(pZzz->Options, OPTION_HW_CURSOR)) {
-        from = X_CONFIG;
-        pZzz->hwCursor = TRUE;
-    }
-    xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n",
-               pZzz->hwCursor ? "HW" : "SW");
-    if (xf86IsOptionSet(pZzz->Options, OPTION_NOACCEL)) {
-        pZzz->noAccel = TRUE;
-        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
-                   "Acceleration disabled\n");
-    } else {
-        pZzz->noAccel = FALSE;
-    }
-    if (xf86IsOptionSet(pZzz->Options, OPTION_PCI_RETRY)) {
-        pZzz->UsePCIRetry = TRUE;
-        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "PCI retry enabled\n");
-    }
-    pZzz->fooHack = 0;
-    if (xf86GetOptValInteger(pZzz->Options, OPTION_FOO_HACK,
-                             &amp;pZzz->fooHack)) {
-        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Foo Hack set to %d\n",
-                   pZzz->fooHack);
-    }
-
-    /*
-     * Find the PCI slot(s) that this screen claimed in the probe.
-     * In this case, exactly one is expected, so complain otherwise.
-     * Note in this case we're not interested in the card types so
-     * that parameter is set to NULL.
-     */
-    if ((i = xf86GetPciInfoForScreen(pScrn->scrnIndex, &amp;pciList, NULL))
-        != 1) {
-        print error message;
-        ZZZFreeRec(pScrn);
-        if (i > 0)
-            xfree(pciList);
-        return FALSE;
-    }
-    /* Note that pciList should be freed below when no longer needed */
-
-    /*
-     * Determine the chipset, allowing config file chipset and
-     * chipid values to override the probed information.  The config
-     * chipset value has precedence over its chipid value if both
-     * are present.
-     *
-     * It isn't necessary to fill in pScrn->chipset if the driver
-     * keeps track of the chipset in its ZZZRec.
-     */
-
-    ...
-
-    /*
-     * Determine video memory, fb base address, I/O addresses, etc,
-     * allowing the config file to override probed values.
-     *
-     * Set the appropriate pScrn fields (videoRam is probably the
-     * most important one that other code might require), and
-     * print out the settings.
-     */
-
-    ...
-
-    /* Initialise a clockRanges list. */
-
-    ...
-
-    /* Set any other chipset specific things in the ZZZRec */
-
-    ...
-
-    /* Select valid modes from those available */
-
-    i = xf86ValidateModes(pScrn, pScrn->monitor->Modes,
-                          pScrn->display->modes, clockRanges,
-                          NULL, minPitch, maxPitch, rounding,
-                          minHeight, maxHeight,
-                          pScrn->display->virtualX,
-                          pScrn->display->virtualY,
-                          pScrn->videoRam * 1024,
-                          LOOKUP_BEST_REFRESH);
-    if (i == -1) {
-        ZZZFreeRec(pScrn);
-        return FALSE;
-    }
-
-    /* Prune the modes marked as invalid */
-
-    xf86PruneDriverModes(pScrn);
-
-    /* If no valid modes, return */
-
-    if (i == 0 || pScrn->modes == NULL) {
-        print error message;
-        ZZZFreeRec(pScrn);
-        return FALSE;
-    }
-
-    /*
-     * Initialise the CRTC fields for the modes.  This driver expects
-     * vertical values to be halved for interlaced modes.
-     */
-    xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V);
-
-    /* Set the current mode to the first in the list. */
-    pScrn->currentMode = pScrn->modes;
-
-    /* Print the list of modes being used. */
-    xf86PrintModes(pScrn);
-
-    /* Set the DPI */
-    xf86SetDpi(pScrn, 0, 0);
-
-    /* Load bpp-specific modules */
-    switch (pScrn->bitsPerPixel) {
-    case 1:
-        mod = "xf1bpp";
-        break;
-    case 4:
-        mod = "xf4bpp";
-        break;
-    case 8:
-        mod = "cfb";
-        break;
-    case 16:
-        mod = "cfb16";
-        break;
-    case 24:
-        mod = "cfb24";
-        break;
-    case 32:
-        mod = "cfb32";
-        break;
-    }
-    if (mod && !xf86LoadSubModule(pScrn, mod))
-        ZZZFreeRec(pScrn);
-        return FALSE;
-
-    /* Load XAA if needed */
-    if (!pZzz->noAccel || pZzz->hwCursor)
-        if (!xf86LoadSubModule(pScrn, "xaa")) {
-            ZZZFreeRec(pScrn);
-            return FALSE;
-        }
-
-    /* Done */
-    return TRUE;
-}
-    </code>
-
-<sect2>MapMem, UnmapMem
-<p>
-
-    Define functions to map and unmap the video memory and any other
-    memory apertures required.  These functions are not mandatory, but
-    it is often useful to have such functions.
-
-    <code>
-static Bool
-ZZZMapMem(ScrnInfoPtr pScrn)
-{
-    /* Call xf86MapPciMem() to map each PCI memory area */
-    ...
-    return TRUE or FALSE;
-}
-
-static Bool
-ZZZUnmapMem(ScrnInfoPtr pScrn)
-{
-    /* Call xf86UnMapVidMem() to unmap each memory area */
-    ...
-    return TRUE or FALSE;
-}
-    </code>
-
-<sect2>Save, Restore
-<p>
-
-    Define functions to save and restore the original video state.  These
-    functions are not mandatory, but are often useful.
-
-    <code>
-static void
-ZZZSave(ScrnInfoPtr pScrn)
-{
-    /*
-     * Save state into per-screen data structures.
-     * If using the vgahw module, vgaHWSave will typically be
-     * called here.
-     */
-    ...
-}
-
-static void
-ZZZRestore(ScrnInfoPtr pScrn)
-{
-    /*
-     * Restore state from per-screen data structures.
-     * If using the vgahw module, vgaHWRestore will typically be
-     * called here.
-     */
-    ...
-}
-    </code>
-
-<sect2>ModeInit
-<p>
-
-    Define a function to initialise a new video mode.  This function isn't
-    mandatory, but is often useful.
-
-    <code>
-static Bool
-ZZZModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)
-{
-    /*
-     * Program a video mode.  If using the vgahw module,
-     * vgaHWInit and vgaRestore will typically be called here.
-     * Once up to the point where there can't be a failure
-     * set pScrn->vtSema to TRUE.
-     */
-    ...
-}
-    </code>
-
-<sect2>ScreenInit
-<p>
-
-    Define the &s.code;ScreenInit()&e.code; function.  This is called
-    at the start of each server generation, and should fill in as much
-    of the &s.code;ScreenRec&e.code; as possible as well as any other
-    data that is initialised once per generation.  It should initialise
-    the framebuffer layers it is using, and initialise the initial video
-    mode.
-
-    This function is mandatory.
-
-    NOTE: The &s.code;ScreenRec&e.code; (&s.code;pScreen&e.code;) is
-	  passed to this driver, but it and the
-	  &s.code;ScrnInfoRecs&e.code; are not yet hooked into each
-	  other.  This means that in this function, and functions it
-	  calls, one cannot be found from the other.
-
-    <code>
-static Bool
-ZZZScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)
-{
-    /* Get the ScrnInfoRec */
-    pScrn = xf86Screens[pScreen->myNum];
-
-    /*
-     * If using the vgahw module, its data structures and related
-     * things are typically initialised/mapped here.
-     */
-
-    /* Save the current video state */
-    ZZZSave(pScrn);
-
-    /* Initialise the first mode */
-    ZZZModeInit(pScrn, pScrn->currentMode);
-
-    /* Set the viewport if supported */
-
-    ZZZAdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0);
-
-    /*
-     * Setup the screen's visuals, and initialise the framebuffer
-     * code.
-     */
-
-    /* Reset the visual list */
-    miClearVisualTypes();
-
-    /*
-     * Setup the visuals supported.  This driver only supports
-     * TrueColor for bpp > 8, so the default set of visuals isn't
-     * acceptable.  To deal with this, call miSetVisualTypes with
-     * the appropriate visual mask.
-     */
-
-    if (pScrn->bitsPerPixel > 8) {
-        if (!miSetVisualTypes(pScrn->depth, TrueColorMask,
-                              pScrn->rgbBits, pScrn->defaultVisual))
-            return FALSE;
-    } else {
-        if (!miSetVisualTypes(pScrn->depth,
-                              miGetDefaultVisualMask(pScrn->depth),
-                              pScrn->rgbBits, pScrn->defaultVisual))
-            return FALSE;
-    }
-
-    /*
-     * Initialise the framebuffer.
-     */
-
-    switch (pScrn->bitsPerPixel) {
-    case 1:
-        ret = xf1bppScreenInit(pScreen, FbBase,
-                               pScrn->virtualX, pScrn->virtualY,
-                               pScrn->xDpi, pScrn->yDpi,
-                               pScrn->displayWidth);
-        break;
-    case 4:
-        ret = xf4bppScreenInit(pScreen, FbBase,
-                               pScrn->virtualX, pScrn->virtualY,
-                               pScrn->xDpi, pScrn->yDpi,
-                               pScrn->displayWidth);
-        break;
-    case 8:
-        ret = cfbScreenInit(pScreen, FbBase,
-                            pScrn->virtualX, pScrn->virtualY,
-                            pScrn->xDpi, pScrn->yDpi,
-                            pScrn->displayWidth);
-        break;
-    case 16:
-        ret = cfb16ScreenInit(pScreen, FbBase,
-                              pScrn->virtualX, pScrn->virtualY,
-                              pScrn->xDpi, pScrn->yDpi,
-                              pScrn->displayWidth);
-        break;
-    case 24:
-        ret = cfb24ScreenInit(pScreen, FbBase,
-                              pScrn->virtualX, pScrn->virtualY,
-                              pScrn->xDpi, pScrn->yDpi,
-                              pScrn->displayWidth);
-        break;
-    case 32:
-        ret = cfb32ScreenInit(pScreen, FbBase,
-                              pScrn->virtualX, pScrn->virtualY,
-                              pScrn->xDpi, pScrn->yDpi,
-                              pScrn->displayWidth);
-        break;
-    default:
-        print a message about an internal error;
-        ret = FALSE;
-        break;
-    }
-
-    if (!ret)
-        return FALSE;
-
-    /* Override the default mask/offset settings */
-    if (pScrn->bitsPerPixel > 8) {
-        for (i = 0, visual = pScreen->visuals;
-             i < pScreen->numVisuals; i++, visual++) {
-            if ((visual->class | DynamicClass) == DirectColor) {
-                visual->offsetRed = pScrn->offset.red;
-                visual->offsetGreen = pScrn->offset.green;
-                visual->offsetBlue = pScrn->offset.blue;
-                visual->redMask = pScrn->mask.red;
-                visual->greenMask = pScrn->mask.green;
-                visual->blueMask = pScrn->mask.blue;
-            }
-        }
-    }
-
-    /*
-     * If banking is needed, initialise an miBankInfoRec (defined in
-     * "mibank.h"), and call miInitializeBanking().
-     */
-    if (!miInitializeBanking(pScreen, pScrn->virtualX, pScrn->virtualY,
-                                     pScrn->displayWidth, pBankInfo))
-        return FALSE;
-
-    /*
-     * If backing store is to be supported (as is usually the case),
-     * initialise it.
-     */
-    miInitializeBackingStore(pScreen);
-
-    /*
-     * Set initial black & white colourmap indices.
-     */
-    xf86SetBlackWhitePixels(pScreen);
-
-    /*
-     * Install colourmap functions.  If using the vgahw module,
-     * vgaHandleColormaps would usually be called here.
-     */
-
-    ...
-
-    /*
-     * Initialise cursor functions.  This example is for the mi
-     * software cursor.
-     */
-    miDCInitialize(pScreen, xf86GetPointerScreenFuncs());
-
-    /* Initialise the default colourmap */
-    switch (pScrn->depth) {
-    case 1:
-        if (!xf1bppCreateDefColormap(pScreen))
-            return FALSE;
-        break;
-    case 4:
-        if (!xf4bppCreateDefColormap(pScreen))
-            return FALSE;
-        break;
-    default:
-        if (!cfbCreateDefColormap(pScreen))
-            return FALSE;
-        break;
-    }
-
-    /*
-     * Wrap the CloseScreen vector and set SaveScreen.
-     */
-    ZZZPTR(pScrn)->CloseScreen = pScreen->CloseScreen;
-    pScreen->CloseScreen = ZZZCloseScreen;
-    pScreen->SaveScreen = ZZZSaveScreen;
-
-    /* Report any unused options (only for the first generation) */
-    if (serverGeneration == 1) {
-        xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options);
-    }
-
-    /* Done */
-    return TRUE;
-}
-    </code>
-
-
-<sect2>SwitchMode
-<p>
-
-    Define the &s.code;SwitchMode()&e.code; function if mode switching
-    is supported by the driver.
-
-    <code>
-static Bool
-ZZZSwitchMode(int scrnIndex, DisplayModePtr mode, int flags)
-{
-    return ZZZModeInit(xf86Screens[scrnIndex], mode);
-}
-    </code>
-
-
-<sect2>AdjustFrame
-<p>
-
-    Define the &s.code;AdjustFrame()&e.code; function if the driver
-    supports this.
-
-    <code>
-static void
-ZZZAdjustFrame(int scrnIndex, int x, int y, int flags)
-{
-    /* Adjust the viewport */
-}
-    </code>
-
-
-<sect2>EnterVT, LeaveVT
-<p>
-
-    Define the &s.code;EnterVT()&e.code; and &s.code;LeaveVT()&e.code;
-    functions.
-
-    These functions are mandatory.
-
-    <code>
-static Bool
-ZZZEnterVT(int scrnIndex, int flags)
-{
-    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
-    return ZZZModeInit(pScrn, pScrn->currentMode);
-}
-
-static void
-ZZZLeaveVT(int scrnIndex, int flags)
-{
-    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
-    ZZZRestore(pScrn);
-}
-    </code>
-
-<sect2>CloseScreen
-<p>
-
-    Define the &s.code;CloseScreen()&e.code; function:
-
-    This function is mandatory.  Note that it unwraps the previously
-    wrapped &s.code;pScreen-&gt;CloseScreen&e.code;, and finishes by
-    calling it.
-
-    <code>
-static Bool
-ZZZCloseScreen(int scrnIndex, ScreenPtr pScreen)
-{
-    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];
-    if (pScrn->vtSema) {
-        ZZZRestore(pScrn);
-        ZZZUnmapMem(pScrn);
-    }
-    pScrn->vtSema = FALSE;
-    pScreen->CloseScreen = ZZZPTR(pScrn)->CloseScreen;
-    return (*pScreen->CloseScreen)(scrnIndex, pScreen);
-}
-    </code>
-
-<sect2>SaveScreen
-<p>
-
-    Define the &s.code;SaveScreen()&e.code; function (the screen
-    blanking function).  When using the vgahw module, this will typically
-    be:
-
-    <code>
-static Bool
-ZZZSaveScreen(ScreenPtr pScreen, int mode)
-{
-    return vgaHWSaveScreen(pScreen, mode);
-}
-    </code>
-
-    This function is mandatory.  Before modifying any hardware register
-    directly this function needs to make sure that the Xserver is active
-    by checking if &s.code;pScrn&e.code; is non-NULL and for
-    &s.code;pScrn->vtSema == TRUE&e.code;.
-
-<sect2>FreeScreen
-<p>
-
-    Define the &s.code;FreeScreen()&e.code; function.  This function
-    is optional.  It should be defined if the &s.code;ScrnInfoRec&e.code;
-    &s.code;driverPrivate&e.code; field is used so that it can be freed
-    when a screen is deleted by the common layer for reasons possibly
-    beyond the driver's control.  This function is not used in during
-    normal (error free) operation.  The per-generation data is freed by
-    the &s.code;CloseScreen()&e.code; function.
-
-    <code>
-static void
-ZZZFreeScreen(int scrnIndex, int flags)
-{
-    /*
-     * If the vgahw module is used vgaHWFreeHWRec() would be called
-     * here.
-     */
-    ZZZFreeRec(xf86Screens[scrnIndex]);
-}
-    </code>
-
-
-</article>
+<!DOCTYPE linuxdoc PUBLIC "-//Xorg//DTD linuxdoc//EN" [

+ <!ENTITY % defs SYSTEM "X11/defs.ent"> %defs;

+ <!-- config file keyword markup -->

+ <!ENTITY s.key STARTTAG "bf">

+ <!ENTITY e.key ENDTAG "bf">

+ <!-- specific config file keywords -->

+ <!ENTITY k.device "&s.key;Device&e.key;">

+ <!ENTITY k.monitor "&s.key;Monitor&e.key;">

+ <!ENTITY k.display "&s.key;Display&e.key;">

+ <!ENTITY k.inputdevice "&s.key;InputDevice&e.key;">

+ <!ENTITY k.screen "&s.key;Screen&e.key;">

+ <!ENTITY k.serverlayout "&s.key;ServerLayout&e.key;">

+ <!ENTITY k.driver "&s.key;Driver&e.key;">

+ <!ENTITY k.module "&s.key;Module&e.key;">

+ <!ENTITY k.identifier "&s.key;Identifier&e.key;">

+ <!ENTITY k.serverflags "&s.key;ServerFlags&e.key;">

+ <!-- command line markup -->

+ <!ENTITY s.cmd STARTTAG "tt">

+ <!ENTITY e.cmd ENDTAG "tt">

+ <!-- inline code markup -->

+ <!ENTITY s.code STARTTAG "tt">

+ <!ENTITY e.code ENDTAG "tt">

+ <!-- function indent -->

+ <!ENTITY f.indent "&nl&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp">

+] >

+

+<article>

+

+<title>XFree86 server 4.x Design (DRAFT)

+<author>The XFree86 Project, Inc

+<and>Updates for X11R&relvers; by Jim Gettys

+<date>19 December 2003

+

+

+

+

+

+

+

+<ident>

+$XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/DESIGN.sgml,v 1.53 2003/08/23 14:10:14 dawes Exp $

+</ident>

+

+

+<p>

+<bf>NOTE</bf>: This is a DRAFT document, and the interfaces described here

+are subject to change without notice.

+

+

+<sect>Preface

+<p>

+

+The broad design principles are:

+<itemize>

+  <item>keep it reasonable

+	<itemize>

+	  <item>We cannot rewrite the complete server

+	  <item>We don't want to re-invent the wheel

+	</itemize>

+  <item>keep it modular

+	<itemize>

+	  <item>As many things as possible should go into modules

+	  <item>The basic loader binary should be minimal

+	  <item>A clean design with well defined layering is important

+	  <item>DDX specific global variables are a nono

+	  <item>The structure should be flexible enough to allow

+		future extensions

+	  <item> The structure should minimize duplication of common code

+	</itemize>

+  <item>keep important features in mind

+	<itemize>

+	  <item>multiple screens, including multiple instances of drivers

+	  <item>mixing different color depths and visuals on different

+		and ideally even on the same screen

+	  <item>better control of the PCI device used

+	  <item>better config file parser

+	  <item>get rid of all VGA compatibility assumptions

+	</itemize>

+</itemize>

+

+Unless we find major deficiencies in the DIX layer, we should avoid

+making changes there.

+

+<sect>The xorg.conf File

+<p>

+

+The xorg.conf file format is similar to the old format, with the following

+changes:

+

+<sect1>&k.device; section

+<p>

+

+    The &k.device; sections are similar to what they used to be, and

+    describe hardware-specific information for a single video card.

+    &k.device;

+    Some new keywords are added:

+

+

+    <descrip>

+      <tag>Driver "drivername"</tag>

+        Specifies the name of the driver to be used for the card.  This

+        is mandatory.

+      <tag>BusID "busslot"</tag>

+        Specifies uniquely the location of the card on the bus.  The

+        purpose is to identify particular cards in a multi-headed

+        configuration.  The format of the argument is intentionally

+        vague, and may be architecture dependent.  For a PCI bus, it

+        is something like "bus:slot:func".

+    </descrip>

+

+    A &k.device; section is considered ``active'' if there is a reference

+    to it in an active &k.screen; section.

+

+<sect1>&k.screen; section

+<p>

+

+    The &k.screen; sections are similar to what they used to be.  They

+    no longer have a &k.driver; keyword, but an &k.identifier; keyword

+    is added.  (The &k.driver; keyword may be accepted in place of the

+    &k.identifier; keyword for compatibility purposes.)  The identifier

+    can be used to identify which screen is to be active when multiple

+    &k.screen sections are present.  It is possible to specify the active

+    screen from the command line.  A default is chosen in the absence

+    of one being specified.  A &k.screen; section is considered ``active''

+    if there is a reference to it either from the command line, or from

+    an active &k.serverlayout; section.

+

+<sect1>&k.inputdevice; section

+<p>

+

+    The &k.inputdevice; section is a new section that describes

+    configuration information for input devices.  It replaces the old

+    &s.key;Keyboard&e.key;, &s.key;Pointer&e.key; and &s.key;XInput&e.key;

+    sections.  Like the &k.device; section, it has two mandatory keywords:

+    &k.identifier; and &k.driver;.  For compatibility purposes the old

+    &s.key;Keyboard&e.key; and &s.key;Pointer&e.key; sections are

+    converted by the parser into &k.inputdevice; sections as follows:

+

+    <descrip>

+      <tag>&s.key;Keyboard&e.key;</tag>

+             &k.identifier; "Implicit Core Keyboard"<newline>

+             &k.driver; "keyboard"

+      <tag>&s.key;Pointer&e.key;</tag>

+             &k.identifier; "Implicit Core Pointer"<newline>

+             &k.driver; "mouse"

+    </descrip>

+

+    An &k.inputdevice; section is considered active if there is a

+    reference to it in an active &k.serverlayout; section.  An

+    &k.inputdevice; section may also be referenced implicitly if there

+    is no &k.serverlayout; section, if the &s.cmd;-screen&e.cmd; command

+    line options is used, or if the &k.serverlayout; section doesn't

+    reference any &k.inputdevice; sections.  In this case, the first

+    sections with drivers "keyboard" and "mouse" are used as the core

+    keyboard and pointer respectively.

+

+<sect1>&k.serverlayout; section

+<p>

+

+    The &k.serverlayout; section is a new section that is used to identify

+    which &k.screen; sections are to be used in a multi-headed configuration,

+    and the relative layout of those screens.  It also identifies which

+    &k.inputdevice; sections are to be used.  Each &k.serverlayout section

+    has an identifier, a list of &k.screen; section identifiers, and a list of

+    &k.inputdevice; section identifiers.  &k.serverflags; options may also be

+    included in a &k.serverlayout; section, making it possible to override

+    the global values in the &k.serverflags; section.

+

+    A &k.serverlayout; section can be made active by being referenced on

+    the command line.  In the absence of this, a default will be chosen

+    (the first one found).  The screen names may optionally be followed

+    by a number specifying the preferred screen number, and optionally

+    by information specifying the physical positioning of the screen,

+    either in absolute terms or relative to another screen (or screens).

+    When no screen number is specified, they are numbered according to

+    the order in which they are listed.  The old (now obsolete) method

+    of providing the positioning information is to give the names of

+    the four adjacent screens.  The order of these is top, bottom, left,

+    right.  Here is an example of a &k.serverlayout; section for two

+    screens using the old method, with the second located to the right

+    of the first:

+

+    <code>

+      Section "ServerLayout"

+        Identifier "Main Layout"

+        Screen     0 "Screen 1" ""  ""  ""  "Screen 2"

+        Screen     1 "Screen 2"

+        Screen     "Screen 3"

+      EndSection

+    </code>

+

+    The preferred way of specifying the layout is to explicitly specify

+    the screen's location in absolute terms or relative to another

+    screen.

+

+    In the absolute case, the upper left corner's coordinates are given

+    after the &s.key;Absolute&e.key; keyword.  If the coordinates are

+    omitted, a value of &s.code;(0,0)&e.code; is assumed.  An example

+    of absolute positioning follows:

+

+    <code>

+      Section "ServerLayout"

+        Identifier "Main Layout"

+        Screen     0 "Screen 1" Absolute 0 0

+        Screen     1 "Screen 2" Absolute 1024 0

+        Screen     "Screen 3" Absolute 2048 0

+      EndSection

+    </code>

+

+    In the relative case, the position is specified by either using one of

+    the following keywords followed by the name of the reference screen:

+

+    <quote>

+      &s.key;RightOf&nl;

+      LeftOf&nl;

+      Above&nl;

+      Below&nl;

+      Relative&e.key;

+    </quote>

+

+    When the &s.key;Relative&e.key; keyword is used, the reference screen

+    name is followed by the coordinates of the new screen's origin

+    relative to reference screen.  The following example shows how to use

+    some of the relative positioning options.

+

+    <code>

+      Section "ServerLayout"

+        Identifier "Main Layout"

+        Screen     0 "Screen 1"

+        Screen     1 "Screen 2" RightOf "Screen 1"

+        Screen     "Screen 3" Relative "Screen 1" 2048 0

+      EndSection

+    </code>

+

+<sect1>Options

+<p>

+

+    Options are used more extensively.  They may appear in most sections

+    now.  Options related to drivers can be present in the &k.screen;,

+    &k.device; and &k.monitor; sections and the &k.display; subsections.

+    The order of precedence is &k.display;, &k.screen;, &k.monitor;,

+    &k.device;.  Options have been extended to allow an optional value

+    to be specified in addition to the option name.  For more details

+    about options, see the <ref id="options" name="Options"> section

+    for details.

+

+<sect>Driver Interface

+<p>

+

+The driver interface consists of a minimal set of entry points that are

+required based on the external events that the driver must react to.

+No non-essential structure is imposed on the way they are used beyond

+that.  This is a significant difference compared with the old design.

+

+The entry points for drawing operations are already taken care of by

+the framebuffer code (including, XAA).  Extensions and enhancements to

+framebuffer code are outside the scope of this document.

+

+This approach to the driver interface provides good flexibility, but does

+increase the complexity of drivers.  To help address this, the XFree86

+common layer provides a set of ``helper'' functions to take care of things

+that most drivers need.  These helpers help minimise the amount of code

+duplication between drivers.  The use of helper functions by drivers is

+however optional, though encouraged.  The basic philosophy behind the

+helper functions is that they should be useful to many drivers, that

+they should balance this against the complexity of their interface.  It

+is inevitable that some drivers may find some helpers unsuitable and

+need to provide their own code.

+

+Events that a driver needs to react to are:

+

+   <descrip>

+   <tag>ScreenInit</tag>

+

+     An initialisation function is called from the DIX layer for each

+     screen at the start of each server generation.

+

+   <tag>Enter VT</tag>

+

+     The server takes control of the console.

+

+   <tag>Leave VT</tag>

+

+     The server releases control of the console.

+

+   <tag>Mode Switch</tag>

+

+     Change video mode.

+

+   <tag>ViewPort change</tag>

+

+     Change the origin of the physical view port.

+

+   <tag>ScreenSaver state change</tag>

+

+     Screen saver activation/deactivation.

+

+   <tag>CloseScreen</tag>

+

+     A close screen function is called from the DIX layer for each screen

+     at the end of each server generation.

+   </descrip>

+

+

+In addition to these events, the following functions are required by

+the XFree86 common layer:

+

+   <descrip>

+   <tag>Identify</tag>

+

+     Print a driver identifying message.

+

+   <tag>Probe</tag>

+

+     This is how a driver identifies if there is any hardware present that

+     it knows how to drive.

+

+   <tag>PreInit</tag>

+

+     Process information from the xorg.conf file, determine the

+     full characteristics of the hardware, and determine if a valid

+     configuration is present.

+   </descrip>

+

+The VidMode extension also requires:

+

+   <descrip>

+   <tag>ValidMode</tag>

+

+     Identify if a new mode is usable with the current configuration.

+     The PreInit function (and/or helpers it calls) may also make use

+     of the ValidMode function or something similar.

+   </descrip>

+

+

+Other extensions may require other entry points.  The drivers will

+inform the common layer of these in such cases.

+

+<sect>Resource Access Control Introduction

+<p>

+

+Graphics devices are accessed through ranges in I/O or memory space.

+While most modern graphics devices allow relocation of such ranges many

+of them still require the use of well established interfaces such as

+VGA memory and IO ranges or 8514/A IO ranges.  With modern buses (like

+PCI) it is possible for multiple video devices to share access to these

+resources.  The RAC (Resource Access Control) subsystem provides a

+mechanism for this.

+

+<sect1>Terms and Definitions

+<p>

+

+<sect2>Bus

+<p>

+

+    ``Bus'' is ambiguous as it is used for different things: it may refer

+    to physical incompatible extension connectors in a computer system.

+    The RAC system knows two such systems: The ISA bus and the PCI bus.

+    (On the software level EISA, MCA and VL buses are currently treated

+    like ISA buses).  ``Bus'' may also refer to logically different

+    entities on a single bus system which are connected via bridges.  A

+    PCI system may have several distinct PCI buses connecting each other

+    by PCI-PCI bridges or to the host CPU by HOST-PCI bridges.

+

+    Systems that host more than one bus system link these together using

+    bridges.  Bridges are a concern to RAC as they might block or pass

+    specific resources.  PCI-PCI bridges may be set up to pass VGA

+    resources to the secondary bus.  PCI-ISA buses pass any resources not

+    decoded on the primary PCI bus to the ISA bus.  This way VGA resources

+    (although exclusive on the ISA bus) can be shared by ISA and PCI

+    cards.  Currently HOST-PCI bridges are not yet handled by RAC as they

+    require specific drivers.

+

+<sect2>Entity

+<p>

+

+    The smallest independently addressable unit on a system bus is

+    referred to as an entity.  So far we know ISA and PCI entities.  PCI

+    entities can be located on the PCI bus by an unique ID consisting of

+    the bus, card and function number.

+

+<sect2>Resource

+<p>

+

+    ``Resource'' refers to a range of memory or I/O addresses an entity

+    can decode.

+

+    If a device is capable of disabling this decoding the resource is

+    called sharable.  For PCI devices a generic method is provided to

+    control resource decoding.  Other devices will have to provide a

+    device specific function to control decoding.

+

+    If the entity is capable of decoding this range at a different

+    location this resource is considered relocatable.

+

+    Resources which start at a specific address and occupy a single

+    continuous range are called block resources.

+

+    Alternatively resource addresses can be decoded in a way that they

+    satisfy the conditions:

+    <quote><verb>

+                    address & mask == base

+    </verb></quote>

+    and

+    <quote><verb>

+                       base & mask == base

+    </verb></quote>

+    Resources addressed in such a way are called sparse resources.

+

+<sect2>Server States

+<p>

+

+    The resource access control system knows two server states: the

+    SETUP and the OPERATING state.  The SETUP state is entered whenever

+    a mode change takes place or the server exits or does VT switching.

+    During this state all entity resources are under resource access

+    control.  During OPERATING state only those entities are controlled

+    which actually have shared resources that conflict with others.

+

+<sect>Control Flow in the Server and Mandatory Driver Functions

+<p>

+

+At the start of each server generation, &s.code;main()&e.code;

+(&s.code;dix/main.c&e.code;) calls the DDX function

+&s.code;InitOutput()&e.code;.  This is the first place that the DDX gets

+control.  &s.code;InitOutput()&e.code; is expected to fill in the global

+&s.code;screenInfo&e.code; struct, and one

+&s.code;screenInfo.screen[]&e.code; entry for each screen present.  Here

+is what &s.code;InitOutput()&e.code; does:

+

+<sect1>Parse the xorg.conf file

+<p>

+

+    This is done at the start of the first server generation only.

+

+    The xorg.conf file is read in full, and the resulting information

+    stored in data structures.  None of the parsed information is

+    processed at this point.  The parser data structures are opaque to

+    the video drivers and to most of the common layer code.

+

+    The entire file is parsed first to remove any section ordering

+    requirements.

+

+

+<sect1>Initial processing of parsed information and command line options

+<p>

+

+    This is done at the start of the first server generation only.

+

+    The initial processing is to determine paths like the

+    &s.key;ModulePath&e.key;, etc, and to determine which &k.serverlayout;,

+    &k.screen; and &k.device; sections are active.

+

+

+<sect1>Enable port I/O access

+<p>

+

+    Port I/O access is controlled from the XFree86 common layer, and is

+    ``all or nothing''.  It is enabled prior to calling driver probes, at

+    the start of subsequent server generations, and when VT switching

+    back to the Xserver.  It is disabled at the end of server generations,

+    and when VT switching away from the Xserver.

+

+    The implementation details of this may vary on different platforms.

+

+

+<sect1>General bus probe

+<p>

+

+    This is done at the start of the first server generation only.

+

+    In the case of ix86 machines, this will be a general PCI probe.

+    The full information obtained here will be available to the drivers.

+    This information persists for the life of the Xserver.  In the PCI

+    case, the PCI information for all video cards found is available by

+    calling &s.code;xf86GetPciVideoInfo()&e.code;.

+

+    <quote>

+    &s.code;pciVideoPtr *xf86GetPciVideoInfo(void)&e.code;

+    <quote><p>

+	returns a pointer to a list of pointers to

+	&s.code;pciVideoRec&e.code; entries, of which there is one for

+	each detected PCI video card.  The list is terminated with a

+	&s.code;NULL&e.code; pointer.  If no PCI video cards were

+	detected, the return value is &s.code;NULL&e.code;.

+

+    </quote>

+    </quote>

+

+    After the bus probe, the resource broker is initialised.

+

+

+<sect1>Load initial set of modules

+<p>

+

+    This is done at the start of the first server generation only.

+

+    The core server contains a list of mandatory modules.  These are loaded

+    first.  Currently the only module on this list is the bitmap font module.

+

+    The next set of modules loaded are those specified explicitly in the

+    &k.module; section of the config file.

+

+    The final set of initial modules are the driver modules referenced

+    by the active &k.device; and &k.inputdevice; sections in the config

+    file.  Each of these modules is loaded exactly once.

+

+

+<sect1>Register Video and Input Drivers

+<p>

+

+    This is done at the start of the first server generation only.

+

+    When a driver module is loaded, the loader calls its

+    &s.code;Setup&e.code; function.  For video drivers, this function

+    calls &s.code;xf86AddDriver()&e.code; to register the driver's

+    &s.code;DriverRec&e.code;, which contains a small set of essential

+    details and driver entry points required during the early phase of

+    &s.code;InitOutput()&e.code;.  &s.code;xf86AddDriver()&e.code; adds

+    it to the global &s.code;xf86DriverList[]&e.code; array.

+

+    The &s.code;DriverRec&e.code; contains the driver canonical name,

+    the &s.code;Identify()&e.code;,

+    &s.code;Probe()&e.code; and &s.code;AvailableOptions()&e.code;

+    function entry points as well as a pointer

+    to the driver's module (as returned from the loader when the driver

+    was loaded) and a reference count which keeps track of how many

+    screens are using the driver.  The entry driver entry points are

+    those required prior to the driver allocating and filling in its

+    &s.code;ScrnInfoRec&e.code;.

+

+    For a static server, the &s.code;xf86DriverList[]&e.code; array is

+    initialised at build time, and the loading of modules is not done.

+

+    A similar procedure is used for input drivers.  The input driver's

+    &s.code;Setup&e.code; function calls

+    &s.code;xf86AddInputDriver()&e.code; to register the driver's

+    &s.code;InputDriverRec&e.code;, which contains a small set of

+    essential details and driver entry points required during the early

+    phase of &s.code;InitInput()&e.code;.

+    &s.code;xf86AddInputDriver()&e.code; adds it to the global

+    &s.code;xf86InputDriverList[]&e.code; array.  For a static server,

+    the &s.code;xf86InputDriverList[]&e.code; array is initialised at

+    build time.

+

+    Both the &s.code;xf86DriverList[]&e.code; and

+    &s.code;xf86InputDriverList[]&e.code; arrays have been initialised

+    by the end of this stage.

+

+    Once all the drivers are registered, their

+    &s.code;ChipIdentify()&e.code; functions are called.

+

+    <quote>

+    &s.code;void ChipIdentify(int flags)&e.code;

+    <quote>

+      This is expected to print a message indicating the driver name,

+      a short summary of what it supports, and a list of the chipset

+      names that it supports.  It may use the xf86PrintChipsets() helper

+      to do this.

+    </quote>

+    </quote>

+

+    <quote>

+    &s.code;void xf86PrintChipsets(const char *drvname, const char *drvmsg,

+                     &f.indent;SymTabPtr chips)&e.code;

+    <quote>

+      This function provides an easy way for a driver's ChipIdentify

+      function to format the identification message.

+    </quote>

+    </quote>

+

+<sect1>Initialise Access Control

+<p>

+

+    This is done at the start of the first server generation only.

+

+    The Resource Access Control (RAC) subsystem is initialised before

+    calling any driver functions that may access hardware.  All generic

+    bus information is probed and saved (for restoration later).  All

+    (shared resource) video devices are disabled at the generic bus

+    level, and a probe is done to find the ``primary'' video device.  These

+    devices remain disabled for the next step.

+

+

+<sect1>Video Driver Probe<label id="probe">

+<p>

+    This is done at the start of the first server generation only.  The

+    &s.code;ChipProbe()&e.code; function of each registered video driver

+    is called.

+

+    <quote><p>

+    &s.code;Bool ChipProbe(DriverPtr drv, int flags)&e.code;

+    <quote><p>

+      The purpose of this is to identify all instances of hardware

+      supported by the driver.  The flags value is currently either 0,

+      &s.code;PROBE_DEFAULT&e.code; or &s.code;PROBE_DETECT&e.code;.

+      &s.code;PROBE_DETECT&e.code; is used if "-configure" or "-probe"

+      command line arguments are given and indicates to the

+      &s.code;Probe()&e.code; function that it should not configure the

+      bus entities and that no xorg.conf information is available.

+

+      The probe must find the active device sections that match the

+      driver by calling &s.code;xf86MatchDevice()&e.code;.  The number

+      of matches found limits the maximum number of instances for this

+      driver.  If no matches are found, the function should return

+      &s.code;FALSE&e.code; immediately.

+

+      Devices that cannot be identified by using device-independent

+      methods should be probed at this stage (keeping in mind that access

+      to all resources that can be disabled in a device-independent way

+      are disabled during this phase).  The probe must be a minimal

+      probe.  It should just determine if there is a card present that

+      the driver can drive.  It should use the least intrusive probe

+      methods possible.  It must not do anything that is not essential,

+      like probing for other details such as the amount of memory

+      installed, etc.  It is recommended that the

+      &s.code;xf86MatchPciInstances()&e.code; helper function be used

+      for identifying matching PCI devices, and similarly the

+      &s.code;xf86MatchIsaInstances()&e.code; for ISA (non-PCI) devices

+      (see the <ref id="rac" name="RAC"> section).  These helpers also

+      checks and claims the appropriate entity.  When not using the

+      helper, that should be done with &s.code;xf86CheckPciSlot()&e.code;

+      and &s.code;xf86ClaimPciSlot()&e.code; for PCI devices and

+      &s.code;xf86ClaimIsaSlot()&e.code; for ISA devices (see the

+      <ref id="rac" name="RAC"> section).

+

+      The probe must register all non-relocatable resources at this

+      stage.  If a resource conflict is found between exclusive resources

+      the driver will fail immediately.  This is usually best done with

+      the &s.code;xf86ConfigPciEntity()&e.code; helper function

+      for PCI and &s.code;xf86ConfigIsaEntity()&e.code; for ISA

+      (see the <ref id="rac" name="RAC"> section).  It is possible to

+      register some entity specific functions with those helpers.  When

+      not using the helpers, the &s.code;xf86AddEntityToScreen()&e.code;

+      &s.code;xf86ClaimFixedResources()&e.code; and

+      &s.code;xf86SetEntityFuncs()&e.code; should be used instead (see

+      the <ref id="rac" name="RAC"> section).

+

+      If a chipset is specified in an active device section which the

+      driver considers relevant (ie it has no driver specified, or the

+      driver specified matches the driver doing the probe), the Probe

+      must return &s.code;FALSE&e.code; if the chipset doesn't match

+      one supported by the driver.

+

+      If there are no active device sections that the driver considers

+      relevant, it must return &s.code;FALSE&e.code;.

+

+      Allocate a &s.code;ScrnInfoRec&e.code; for each active instance of the

+      hardware found, and fill in the basic information, including the

+      other driver entry points.   This is best done with the

+      &s.code;xf86ConfigIsaEntity()&e.code; helper function for ISA

+      instances or &s.code;xf86ConfigPciEntity()&e.code; for PCI instances.

+      These functions allocate a &s.code;ScrnInfoRec&e.code; for active

+      entities. Optionally &s.code;xf86AllocateScreen()&e.code;

+      function may also be used to allocate the &s.code;ScrnInfoRec&e.code;.

+      Any of these functions take care of initialising fields to defined

+      ``unused'' values.

+

+      Claim the entities for each instance of the hardware found.  This

+      prevents other drivers from claiming the same hardware.

+

+      Must leave hardware in the same state it found it in, and must not

+      do any hardware initialisation.

+

+      All detection can be overridden via the config file, and that

+      parsed information is available to the driver at this stage.

+

+      Returns &s.code;TRUE&e.code; if one or more instances are found,

+      and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;int xf86MatchDevice(const char *drivername,

+		&f.indent;GDevPtr **driversectlist)&e.code;

+    <quote><p>

+

+      This function takes the name of the driver and returns via

+      &s.code;driversectlist&e.code; a list of device sections that

+      match the driver name.  The function return value is the number

+      of matches found.  If a fatal error is encountered the return

+      value is &s.code;-1&e.code;.

+

+      The caller should use &s.code;xfree()&e.code; to free

+      &s.code;*driversectlist&e.code; when it is no longer needed.

+

+    </quote>

+

+    &s.code;ScrnInfoPtr xf86AllocateScreen(DriverPtr drv, int flags)&e.code;

+    <quote><p>

+      This function allocates a new &s.code;ScrnInfoRec&e.code; in the

+      &s.code;xf86Screens[]&e.code; array.  This function is normally

+      called by the video driver &s.code;ChipProbe()&e.code; functions.

+      The return value is a pointer to the newly allocated

+      &s.code;ScrnInfoRec&e.code;.  The &s.code;scrnIndex&e.code;,

+      &s.code;origIndex&e.code;, &s.code;module&e.code; and

+      &s.code;drv&e.code; fields are initialised.  The reference count

+      in &s.code;drv&e.code; is incremented.  The storage for any

+      currently allocated ``privates'' pointers is also allocated and

+      the &s.code;privates&e.code; field initialised (the privates data

+      is of course not allocated or initialised).  This function never

+      returns on failure.  If the allocation fails, the server exits

+      with a fatal error.  The flags value is not currently used, and

+      should be set to zero.

+    </quote>

+    </quote>

+

+    At the completion of this, a list of &s.code;ScrnInfoRecs&e.code;

+    have been allocated in the &s.code;xf86Screens[]&e.code; array, and

+    the associated entities and fixed resources have been claimed.  The

+    following &s.code;ScrnInfoRec&e.code; fields must be initialised at

+    this point:

+

+    <quote><verb>

+          driverVersion

+          driverName

+          scrnIndex(*)

+          origIndex(*)

+          drv(*)

+          module(*)

+          name

+          Probe

+          PreInit

+          ScreenInit

+          EnterVT

+          LeaveVT

+          numEntities

+          entityList

+          access

+    </verb></quote>

+

+    <tt>(*)</tt> These are initialised when the &s.code;ScrnInfoRec&e.code;

+    is allocated, and not explicitly by the driver.

+

+    The following &s.code;ScrnInfoRec&e.code; fields must be initialised

+    if the driver is going to use them:

+

+    <quote><verb>

+          SwitchMode

+          AdjustFrame

+          FreeScreen

+          ValidMode

+    </verb></quote>

+

+<sect1>Matching Screens

+<p>

+

+    This is done at the start of the first server generation only.

+

+    After the Probe phase is finished, there will be some number of

+    &s.code;ScrnInfoRecs&e.code;.  These are then matched with the active

+    &k.screen; sections in the xorg.conf, and those not having an active

+    &k.screen; section are deleted.  If the number of remaining screens

+    is 0, &s.code;InitOutput()&e.code; sets

+    &s.code;screenInfo.numScreens&e.code; to &s.code;0&e.code; and

+    returns.

+

+    At this point the following fields of the &s.code;ScrnInfoRecs&e.code;

+    must be initialised:

+

+    <quote><verb>

+          confScreen

+    </verb></quote>

+

+

+<sect1>Allocate non-conflicting resources

+<p>

+

+    This is done at the start of the first server generation only.

+

+    Before calling the drivers again, the resource information collected

+    from the Probe phase is processed.  This includes checking the extent

+    of PCI resources for the probed devices, and resolving any conflicts

+    in the relocatable PCI resources.  It also reports conflicts, checks

+    bus routing issues, and anything else that is needed to enable the

+    entities for the next phase.

+

+    If any drivers registered an &s.code;EntityInit()&e.code; function

+    during the Probe phase, then they are called here.

+

+

+<sect1>Sort the Screens and pre-check Monitor Information

+<p>

+

+    This is done at the start of the first server generation only.

+

+    The list of screens is sorted to match the ordering requested in the

+    config file.

+

+    The list of modes for each active monitor is checked against the

+    monitor's parameters.  Invalid modes are pruned.

+

+

+<sect1>PreInit

+<p>

+

+    This is done at the start of the first server generation only.

+

+    For each &s.code;ScrnInfoRec&e.code;, enable access to the screens entities and call

+    the &s.code;ChipPreInit()&e.code; function.

+

+    <quote><p>

+    &s.code;Bool ChipPreInit(ScrnInfoRec screen, int flags)&e.code;

+    <quote><p>

+      The purpose of this function is to find out all the information

+      required to determine if the configuration is usable, and to

+      initialise those parts of the &s.code;ScrnInfoRec&e.code; that

+      can be set once at the beginning of the first server generation.

+

+      The number of entities registered for the screen should be checked

+      against the expected number (most drivers expect only one).  The

+      entity information for each of them should be retrieved (with

+      &s.code;xf86GetEntityInfo()&e.code;) and checked for the correct

+      bus type and that none of the sharable resources registered during

+      the Probe phase was rejected.

+

+      Access to resources for the entities that can be controlled in a

+      device-independent way are enabled before this function is called.

+      If the driver needs to access any resources that it has disabled

+      in an &s.code;EntityInit()&e.code; function that it registered,

+      then it may enable them here providing that it disables them before

+      this function returns.

+

+      This includes probing for video memory, clocks, ramdac, and all

+      other HW info that is needed.  It includes determining the

+      depth/bpp/visual and related info.  It includes validating and

+      determining the set of video modes that will be used (and anything

+      that is required to determine that).

+

+      This information should be determined in the least intrusive way

+      possible.  The state of the HW must remain unchanged by this

+      function.  Although video memory (including MMIO) may be mapped

+      within this function, it must be unmapped before returning.  Driver

+      specific information should be stored in a structure hooked into

+      the &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code;

+      field.  Any other modules which require persistent data (ie data

+      that persists across server generations) should be initialised in

+      this function, and they should allocate a ``privates'' index to

+      hook their data into by calling

+      &s.code;xf86AllocateScrnInfoPrivateIndex().&e.code;  The ``privates''

+      data is persistent.

+

+      Helper functions for some of these things are provided at the

+      XFree86 common level, and the driver can choose to make use of

+      them.

+

+      All additional resources that the screen needs must be registered

+      here.  This should be done with

+      &s.code;xf86RegisterResources()&e.code;.  If some of the fixed

+      resources registered in the Probe phase are not needed or not

+      decoded by the hardware when in the OPERATING server state, their

+      status should be updated with

+      &s.code;xf86SetOperatingState()&e.code;.

+

+      Modules may be loaded at any point in this function, and all

+      modules that the driver will need must be loaded before the end

+      of this function.  Either the  &s.code;xf86LoadSubModule()&e.code;

+      or the &s.code;xf86LoadDrvSubModule()&e.code; function should be

+      used to load modules depending on whether a

+      &s.code;ScrnInfoRec&e.code; has been set up. A driver may unload

+      a module within this function if it was only needed temporarily,

+      and the &s.code;xf86UnloadSubModule()&e.code; function should be used

+      to do that.  Otherwise there is no need to explicitly unload modules

+      because the loader takes care of module dependencies and will

+      unload submodules automatically if/when the driver module is

+      unloaded.

+

+      The bulk of the &s.code;ScrnInfoRec&e.code; fields should be filled

+      out in this function.

+

+      &s.code;ChipPreInit()&e.code; returns &s.code;FALSE&e.code; when

+      the configuration is unusable in some way (unsupported depth, no

+      valid modes, not enough video memory, etc), and &s.code;TRUE&e.code;

+      if it is usable.

+

+      It is expected that if the &s.code;ChipPreInit()&e.code; function

+      returns &s.code;TRUE&e.code;, then the only reasons that subsequent

+      stages in the driver might fail are lack or resources (like xalloc

+      failures).  All other possible reasons for failure should be

+      determined by the &s.code;ChipPreInit()&e.code; function.

+

+    </quote>

+    </quote>

+

+    The &s.code;ScrnInfoRecs&e.code; for screens where the &s.code;ChipPreInit()&e.code; fails are removed.

+    If none remain, &s.code;InitOutput()&e.code; sets &s.code;screenInfo.numScreens&e.code; to &s.code;0&e.code; and returns.

+

+    At this point, further fields of the &s.code;ScrnInfoRecs&e.code; would normally be

+    filled in.  Most are not strictly mandatory, but many are required

+    by other layers and/or helper functions that the driver may choose

+    to use.  The documentation for those layers and helper functions

+    indicates which they require.

+

+    The following fields of the &s.code;ScrnInfoRecs&e.code; should be filled in if the

+    driver is going to use them:

+

+    <quote><verb>

+          monitor

+          display

+          depth

+          pixmapBPP

+          bitsPerPixel

+          weight                (>8bpp only)

+          mask                  (>8bpp only)

+          offset                (>8bpp only)

+          rgbBits               (8bpp only)

+          gamma

+          defaultVisual

+          maxHValue

+          maxVValue

+          virtualX

+          virtualY

+          displayWidth

+          frameX0

+          frameY0

+          frameX1

+          frameY1

+          zoomLocked

+          modePool

+          modes

+          currentMode

+          progClock             (TRUE if clock is programmable)

+          chipset

+          ramdac

+          clockchip

+          numClocks             (if not programmable)

+          clock[]               (if not programmable)

+          videoRam

+          biosBase

+          memBase

+          memClk

+          driverPrivate

+          chipID

+          chipRev

+    </verb></quote>

+

+    <quote><p>

+    &s.code;pointer xf86LoadSubModule(ScrnInfoPtr pScrn, const char *name)&e.code:

+      and

+    &s.code;pointer xf86LoadDrvSubModule(DriverPtr drv, const char *name)&e.code:

+    <quote><p>

+      Load a module that a driver depends on.  This function loads the

+      module &s.code;name&e.code; as a sub module of the driver.  The

+      return value is a handle identifying the new module.  If the load

+      fails, the return value will be &s.code;NULL&e.code;.  If a driver

+      needs to explicitly unload a module it has loaded in this way,

+      the return value must be saved and passed to

+      &s.code;xf86UnloadSubModule()&e.code; when unloading.

+

+    </quote>

+

+    &s.code;void xf86UnloadSubModule(pointer module)&e.code;

+    <quote><p>

+      Unloads the module referenced by &s.code;module&e.code;.

+      &s.code;module&e.code; should be a pointer returned previously

+      by &s.code;xf86LoadSubModule()&e.code; or

+      &s.code;xf86LoadDrvSubModule()&e.code; .

+

+    </quote>

+    </quote>

+

+<sect1>Cleaning up Unused Drivers

+<p>

+

+    At this point it is known which screens will be in use, and which

+    drivers are being used.  Unreferenced drivers (and modules they

+    may have loaded) are unloaded here.

+

+

+<sect1>Consistency Checks

+<p>

+

+    The parameters that must be global to the server, like pixmap formats,

+    bitmap bit order, bitmap scanline unit and image byte order are

+    compared for each of the screens.  If a mismatch is found, the server

+    exits with an appropriate message.

+

+

+<sect1>Check if Resource Control is Needed

+<p>

+

+    Determine if resource access control is needed.  This is the case

+    if more than one screen is used.  If necessary the RAC wrapper module

+    is loaded.

+

+<sect1>AddScreen (ScreenInit)

+<p>

+

+    At this point, the valid screens are known.

+    &s.code;AddScreen()&e.code; is called for each of them, passing

+    &s.code;ChipScreenInit()&e.code; as the argument.

+    &s.code;AddScreen()&e.code; is a DIX function that allocates a new

+    &s.code;screenInfo.screen[]&e.code; entry (aka

+    &s.code;pScreen&e.code;), and does some basic initialisation of it.

+    It then calls the &s.code;ChipScreenInit()&e.code; function, with

+    &s.code;pScreen&e.code; as one of its arguments.  If

+    &s.code;ChipScreenInit()&e.code; returns &s.code;FALSE&e.code;,

+    &s.code;AddScreen()&e.code; returns &s.code;-1&e.code;.  Otherwise

+    it returns the index of the screen.  &s.code;AddScreen()&e.code;

+    should only fail because of programming errors or failure to allocate

+    resources (like memory).  All configuration problems should be

+    detected BEFORE this point.

+

+    <quote><p>

+    &s.code;Bool ChipScreenInit(int index, ScreenPtr pScreen,

+	&f.indent;int argc, char **argv)&e.code;

+    <quote><p>

+      This is called at the start of each server generation.

+

+      Fill in all of &s.code;pScreen&e.code;, possibly doing some of

+      this by calling ScreenInit functions from other layers like mi,

+      framebuffers (cfb, etc), and extensions.

+

+      Decide which operations need to be placed under resource access

+      control.  The classes of operations are the frame buffer operations

+      (&s.code;RAC_FB&e.code;), the pointer operations

+      (&s.code;RAC_CURSOR&e.code;), the viewport change operations

+      (&s.code;RAC_VIEWPORT&e.code;) and the colormap operations

+      (&s.code;RAC_COLORMAP&e.code;).  Any operation that requires

+      resources which might be disabled during OPERATING state should

+      be set to use RAC.  This can be specified separately for memory

+      and IO resources (the &s.code;racMemFlags&e.code; and

+      &s.code;racIoFlags&e.code; fields of the &s.code;ScrnInfoRec&e.code;

+      respectively).

+

+      Map any video memory or other memory regions.

+

+      Save the video card state.  Enough state must be saved so that

+      the original state can later be restored.

+

+      Initialise the initial video mode.  The &s.code;ScrnInfoRec&e.code;'s

+      &s.code;vtSema&e.code; field should be set to &s.code;TRUE&e.code;

+      just prior to changing the video hardware's state.

+

+    </quote>

+    </quote>

+

+

+    The &s.code;ChipScreenInit()&e.code; function (or functions from other

+    layers that it calls) should allocate entries in the

+    &s.code;ScreenRec&e.code;'s &s.code;devPrivates&e.code; area by

+    calling &s.code;AllocateScreenPrivateIndex()&e.code; if it needs

+    per-generation storage.  Since the &s.code;ScreenRec&e.code;'s

+    &s.code;devPrivates&e.code; information is cleared for each server

+    generation, this is the correct place to initialise it.

+

+    After &s.code;AddScreen()&e.code; has successfully returned, the

+    following &s.code;ScrnInfoRec&e.code; fields are initialised:

+

+    <quote><verb>

+          pScreen

+          racMemFlags

+          racIoFlags

+    </verb></quote>

+

+    The &s.code;ChipScreenInit()&e.code; function should initialise the

+    &s.code;CloseScreen&e.code; and &s.code;SaveScreen&e.code; fields

+    of &s.code;pScreen&e.code;.  The old value of

+    &s.code;pScreen-&gt;CloseScreen&e.code; should be saved as part of

+    the driver's per-screen private data, allowing it to be called from

+    &s.code;ChipCloseScreen()&e.code;.  This means that the existing

+    &s.code;CloseScreen()&e.code; function is wrapped.

+

+<sect1>Finalising RAC Initialisation

+<p>

+

+    After all the &s.code;ChipScreenInit()&e.code; functions have been

+    called, each screen has registered its RAC requirements.  This

+    information is used to determine which shared resources are requested

+    by more than one driver and set the access functions accordingly.

+    This is done following these rules:

+

+    <enum>

+     <item>The sharable resources registered by each entity are compared.

+	If a resource is registered by more than one entity the entity

+	will be marked to indicate that it needs to share this resources

+	type (IO or MEM).

+

+     <item>A resource marked ``disabled'' during OPERATING state will be

+        ignored entirely.

+

+     <item>A resource marked ``unused'' will only conflict with an overlapping

+	resource of an other entity if the second is actually in use

+	during OPERATING state.

+

+     <item>If an ``unused'' resource was found to conflict but the entity

+	does not use any other resource of this type the entire resource

+	type will be disabled for that entity.

+    </enum>

+

+

+<sect1>Finishing InitOutput()

+<p>

+

+    At this point &s.code;InitOutput()&e.code; is finished, and all the

+    screens have been setup in their initial video mode.

+

+

+<sect1>Mode Switching

+<p>

+

+    When a SwitchMode event is received, &s.code;ChipSwitchMode()&e.code;

+    is called (when it exists):

+

+    <quote><p>

+    &s.code;Bool ChipSwitchMode(int index, DisplayModePtr mode, int flags)&e.code;

+    <quote><p>

+      Initialises the new mode for the screen identified by

+      &s.code;index;&e.code;.  The viewport may need to be adjusted

+      also.

+

+    </quote>

+    </quote>

+

+

+<sect1>Changing Viewport

+<p>

+

+    When a Change Viewport event is received,

+    &s.code;ChipAdjustFrame()&e.code; is called (when it exists):

+

+    <quote><p>

+    &s.code;void ChipAdjustFrame(int index, int x, int y, int flags)&e.code;

+    <quote><p>

+      Changes the viewport for the screen identified by

+      &s.code;index;&e.code;.

+

+      It should be noted that many chipsets impose restrictions on where the

+      viewport may be placed in the virtual resolution, either for alignment

+      reasons, or to prevent the start of the viewport from being positioned

+      within a pixel (as can happen in a 24bpp mode).  After calculating the

+      value the chipset's panning registers need to be set to for non-DGA

+      modes, this function should recalculate the ScrnInfoRec's

+      &s.code;frameX0&e.code;, &s.code;frameY0&e.code, &s.code;frameX1&e.code;

+      and &s.code;frameY1&e.code; fields to correspond to that value.  If

+      this is not done, switching to another mode might cause the position

+      of a hardware cursor to change.

+

+    </quote>

+    </quote>

+

+

+<sect1>VT Switching

+<p>

+

+    When a VT switch event is received, &s.code;xf86VTSwitch()&e.code;

+    is called.  &s.code;xf86VTSwitch()&e.code; does the following:

+

+    <descrip>

+    <tag>On ENTER:</tag>

+    <itemize>

+      <item>enable port I/O access

+

+      <item>save and initialise the bus/resource state

+

+      <item>enter the SETUP server state

+

+      <item>calls &s.code;ChipEnterVT()&e.code; for each screen

+

+      <item>enter the OPERATING server state

+

+      <item>validate GCs

+

+      <item>Restore fb from saved pixmap for each screen

+

+      <item>Enable all input devices

+    </itemize>

+    <tag>On LEAVE:</tag>

+    <itemize>

+      <item>Save fb to pixmap for each screen

+

+      <item>validate GCs

+

+      <item>enter the SETUP server state

+

+      <item>calls &s.code;ChipLeaveVT()&e.code; for each screen

+

+      <item>disable all input devices

+

+      <item>restore bus/resource state

+

+      <item>disables port I/O access

+    </itemize>

+    </descrip>

+

+    <quote><p>

+    &s.code;Bool ChipEnterVT(int index, int flags)&e.code;

+    <quote><p>

+      This function should initialise the current video mode and

+      initialise the viewport, turn on the HW cursor if appropriate,

+      etc.

+

+      Should it re-save the video state before initialising the video

+      mode?

+

+    </quote>

+

+    &s.code;void ChipLeaveVT(int index, int flags)&e.code;

+    <quote><p>

+      This function should restore the saved video state.  If

+      appropriate it should also turn off the HW cursor, and invalidate

+      any pixmap/font caches.

+

+    </quote>

+

+    Optionally, &s.code;ChipLeaveVT()&e.code; may also unmap memory

+    regions.  If so, &s.code;ChipEnterVT()&e.code; will need to remap

+    them.  Additionally, if an aperture used to access video memory is

+    unmapped and remapped in this fashion, &s.code;ChipEnterVT()&e.code;

+    will also need to notify the framebuffer layers of the aperture's new

+    location in virtual memory.  This is done with a call to the screen's

+    &s.code;ModifyPixmapHeader()&e.code; function, as follows

+

+    <quote><p>

+    &s.code;(*pScreen->ModifyPixmapHeader)(pScrn->ppix,

+        &f.indent;-1, -1, -1, -1, -1, <it>NewApertureAddress</it>);&e.code;

+    <quote><p>

+        where the &s.code``ppix''&e.code; field in a ScrnInfoRec

+        points to the pixmap used by the screen's

+        &s.code;SaveRestoreImage()&e.code; function to hold the screen's

+        contents while switched out.

+

+    </quote>

+    </quote>

+

+    Currently, aperture remapping, as described here, should not be

+    attempted if the driver uses the &s.code;xf8_16bpp&e.code; or

+    &s.code;xf8_32bpp&e.code; framebuffer layers.  A pending

+    restructuring of VT switching will address this restriction in

+    the near future.

+

+    </quote>

+

+    Other layers may wrap the &s.code;ChipEnterVT()&e.code; and

+    &s.code;ChipLeaveVT()&e.code; functions if they need to take some

+    action when these events are received.

+

+<sect1>End of server generation

+<p>

+

+    At the end of each server generation, the DIX layer calls

+    &s.code;ChipCloseScreen()&e.code; for each screen:

+

+    <quote><p>

+    &s.code;Bool ChipCloseScreen(int index, ScreenPtr pScreen)&e.code;

+    <quote><p>

+      This function should restore the saved video state and unmap the

+      memory regions.

+

+      It should also free per-screen data structures allocated by the

+      driver.  Note that the persistent data held in the

+      &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field

+      should not be freed here because it is needed by subsequent server

+      generations.

+

+      The &s.code;ScrnInfoRec&e.code;'s &s.code;vtSema&e.code; field

+      should be set to &s.code;FALSE&e.code; once the video HW state

+      has been restored.

+

+      Before freeing the per-screen driver data the saved

+      &s.code;CloseScreen&e.code; value should be restored to

+      &s.code;pScreen-&gt;CloseScreen&e.code;, and that function should

+      be called after freeing the data.

+

+    </quote>

+    </quote>

+

+<sect>Optional Driver Functions

+<p>

+

+The functions outlined here can be called from the XFree86 common layer,

+but their presence is optional.

+

+<sect1>Mode Validation

+<p>

+

+    When a mode validation helper supplied by the XFree86-common layer is

+    being used, it can be useful to provide a function to check for hw

+    specific mode constraints:

+

+    <quote><p>

+    &s.code;ModeStatus ChipValidMode(int index, DisplayModePtr mode,

+                   &f.indent;Bool verbose, int flags)&e.code;

+    <quote><p>

+      Check the passed mode for hw-specific constraints, and return the

+      appropriate status value.

+

+    </quote>

+    </quote>

+

+<p>

+This function may also modify the effective timings and clock of the passed

+mode.  These have been stored in the mode's &s.code;Crtc*&e.code; and

+&s.code;SynthClock&e.code; elements, and have already been adjusted for

+interlacing, doublescanning, multiscanning and clock multipliers and dividers.

+The function should not modify any other mode field, unless it wants to modify

+the mode timings reported to the user by &s.code;xf86PrintModes()&e.code;.

+

+<p>

+The function is called once for every mode in the xorg.conf Monitor section

+assigned to the screen, with &s.code;flags&e.code; set to

+&s.code;MODECHECK_INITIAL&e.code;.  It is subsequently called for every mode

+in the xorg.conf Display subsection assigned to the screen, with

+&s.code;flags&e.code; set to &s.code;MODECHECK_FINAL&e.code;.  In the second

+case, the mode will have successfully passed all other tests.  In addition,

+the &s.code;ScrnInfoRec&e.code;'s &s.code;virtualX&e.code;,

+&s.code;virtualY&e.code; and &s.code;displayWidth&e.code; fields will have been

+set as if the mode to be validated were to be the last mode accepted.

+

+<p>

+In effect, calls with MODECHECK_INITIAL are intended for checks that do not

+depend on any mode other than the one being validated, while calls with

+MODECHECK_FINAL are intended for checks that may involve more than one mode.

+

+<sect1>Free screen data

+<p>

+

+    When a screen is deleted prior to the completion of the ScreenInit

+    phase the &s.code;ChipFreeScreen()&e.code; function is called when defined.

+

+    <quote><p>

+    &s.code;void ChipFreeScreen(int scrnindex, int flags)&e.code;

+    <quote><p>

+      Free any driver-allocated data that may have been allocated up to

+      and including an unsuccessful &s.code;ChipScreenInit()&e.code;

+      call.  This would predominantly be data allocated by

+      &s.code;ChipPreInit()&e.code; that persists across server

+      generations.  It would include the &s.code;driverPrivate&e.code;,

+      and any ``privates'' entries that modules may have allocated.

+

+    </quote>

+    </quote>

+

+

+<sect>Recommended driver functions

+<p>

+

+The functions outlined here are for internal use by the driver only.

+They are entirely optional, and are never accessed directly from higher

+layers.  The sample function declarations shown here are just examples.

+The interface (if any) used is up to the driver.

+

+<sect1>Save

+<p>

+

+    Save the video state.  This could be called from &s.code;ChipScreenInit()&e.code; and

+    (possibly) &s.code;ChipEnterVT()&e.code;.

+

+    <quote><p>

+    &s.code;void ChipSave(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      Saves the current state.  This will only be saving pre-server

+      states or states before returning to the server.  There is only

+      one current saved state per screen and it is stored in private

+      storage in the screen.

+

+    </quote>

+    </quote>

+

+<sect1>Restore

+<p>

+

+    Restore the original video state.  This could be called from the

+    &s.code;ChipLeaveVT()&e.code; and &s.code;ChipCloseScreen()&e.code;

+    functions.

+

+    <quote><p>

+    &s.code;void ChipRestore(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      Restores the saved state from the private storage.  Usually only

+      used for restoring text modes.

+

+    </quote>

+    </quote>

+

+

+<sect1>Initialise Mode

+<p>

+

+    Initialise a video mode.  This could be called from the

+    &s.code;ChipScreenInit()&e.code;, &s.code;ChipSwitchMode()&e.code;

+    and &s.code;ChipEnterVT()&e.code; functions.

+

+    <quote><p>

+    &s.code;Bool ChipModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)&e.code;

+    <quote><p>

+      Programs the hardware for the given video mode.

+

+    </quote>

+    </quote>

+

+

+<sect>Data and Data Structures

+<p>

+

+<sect1>Command line data

+<p>

+

+Command line options are typically global, and are stored in global

+variables.  These variables are read-only and are available to drivers

+via a function call interface.  Most of these command line values are

+processed via helper functions to ensure that they are treated consistently

+by all drivers.  The other means of access is provided for cases where

+the supplied helper functions might not be appropriate.

+

+Some of them are:

+

+<quote><verb>

+    xf86Verbose               verbosity level

+    xf86Bpp                   -bpp from the command line

+    xf86Depth                 -depth from the command line

+    xf86Weight                -weight from the command line

+    xf86Gamma                 -{r,g,b,}gamma from the command line

+    xf86FlipPixels            -flippixels from the command line

+    xf86ProbeOnly             -probeonly from the command line

+    defaultColorVisualClass   -cc from the command line

+</verb></quote>

+

+If we ever do allow for screen-specific command line options, we may

+need to rethink this.

+

+These can be accessed in a read-only manner by drivers with the following

+functions:

+

+    <quote><p>

+    &s.code;int xf86GetVerbosity()&e.code;

+    <quote><p>

+      Returns the value of &s.code;xf86Verbose&e.code;.

+

+    </quote>

+

+    &s.code;int xf86GetDepth()&e.code;

+    <quote><p>

+      Returns the &s.cmd;-depth&e.cmd; command line setting.  If not

+      set on the command line, &s.code;-1&e.code; is returned.

+

+    </quote>

+

+    &s.code;rgb xf86GetWeight()&e.code;

+    <quote><p>

+      Returns the &s.cmd;-weight&e.cmd; command line setting.  If not

+      set on the command line, &s.code;{0, 0, 0}&e.code; is returned.

+

+    </quote>

+

+    &s.code;Gamma xf86GetGamma()&e.code;

+    <quote><p>

+      Returns the &s.cmd;-gamma&e.cmd; or &s.cmd;-rgamma&e.cmd;,

+      &s.cmd;-ggamma&e.cmd;, &s.cmd;-bgamma&e.cmd; command line settings.

+      If not set on the command line, &s.code;{0.0, 0.0, 0.0}&e.code;

+      is returned.

+

+    </quote>

+

+    &s.code;Bool xf86GetFlipPixels()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if &s.cmd;-flippixels&e.cmd; is

+      present on the command line, and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;const char *xf86GetServerName()&e.code;

+    <quote><p>

+      Returns the name of the X server from the command line.

+

+    </quote>

+    </quote>

+

+<sect1>Data handling

+<p>

+

+Config file data contains parts that are global, and parts that are

+Screen specific.  All of it is parsed into data structures that neither

+the drivers or most other parts of the server need to know about.

+

+The global data is typically not required by drivers, and as such, most

+of it is stored in the private &s.code;xf86InfoRec&e.code;.

+

+The screen-specific data collected from the config file is stored in

+screen, device, display, monitor-specific data structures that are separate

+from the &s.code;ScrnInfoRecs&e.code;, with the appropriate elements/fields

+hooked into the &s.code;ScrnInfoRecs&e.code; as required.  The screen

+config data is held in &s.code;confScreenRec&e.code;, device data in

+the &s.code;GDevRec&e.code;, monitor data in the &s.code;MonRec&e.code;,

+and display data in the &s.code;DispRec&e.code;.

+

+The XFree86 common layer's screen specific data (the actual data in use

+for each screen) is held in the &s.code;ScrnInfoRecs&e.code;.  As has

+been outlined above, the &s.code;ScrnInfoRecs&e.code; are allocated at probe

+time, and it is the responsibility of the Drivers' &s.code;Probe()&e.code;

+and &s.code;PreInit()&e.code; functions to finish filling them in based

+on both data provided on the command line and data provided from the

+Config file.  The precedence for this is:

+

+    <quote>

+    command line  -&gt;  config file  -&gt;  probed/default data

+    </quote>

+

+For most things in this category there are helper functions that the

+drivers can use to ensure that the above precedence is consistently

+used.

+

+As well as containing screen-specific data that the XFree86 common layer

+(including essential parts of the server infrastructure as well as helper

+functions) needs to access, it also contains some data that drivers use

+internally.  When considering whether to add a new field to the

+&s.code;ScrnInfoRec&e.code;, consider the balance between the convenience

+of things that lots of drivers need and the size/obscurity of the

+&s.code;ScrnInfoRec&e.code;.

+

+Per-screen driver specific data that cannot be accommodated with the

+static &s.code;ScrnInfoRec&e.code; fields is held in a driver-defined

+data structure, a pointer to which is assigned to the

+&s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field.  This

+is per-screen data that persists across server generations (as does the

+bulk of the static &s.code;ScrnInfoRec&e.code; data).  It would typically

+also include the video card's saved state.

+

+Per-screen data for other modules that the driver uses (for example,

+the XAA module) that is reset for each server generation is hooked into

+the &s.code;ScrnInfoRec&e.code; through it's &s.code;privates&e.code;

+field.

+

+Once it has stabilised, the data structures and variables accessible to

+video drivers will be documented here.  In the meantime, those things

+defined in the &s.code;xf86.h&e.code; and &s.code;xf86str.h&e.code;

+files are visible to video drivers.  Things defined in

+&s.code;xf86Priv.h&e.code; and &s.code;xf86Privstr.h&e.code; are NOT

+intended to be visible to video drivers, and it is an error for a driver

+to include those files.

+

+

+<sect1>Accessing global data

+<p>

+

+Some other global state information that the drivers may access via

+functions is as follows:

+

+    <quote><p>

+    &s.code;Bool xf86ServerIsExiting()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if the server is at the end of a

+      generation and is in the process of exiting, and

+      &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;Bool xf86ServerIsResetting()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if the server is at the end of a

+      generation and is in the process of resetting, and

+      &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;Bool xf86ServerIsInitialising()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if the server is at the beginning of

+      a generation and is in the process of initialising, and

+      &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;Bool xf86ServerIsOnlyProbing()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if the -probeonly command line flag

+      was specified, and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;Bool xf86CaughtSignal()&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; if the server has caught a signal,

+      and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+    </quote>

+

+<sect1>Allocating private data

+<p>

+

+A driver and any module it uses may allocate per-screen private storage

+in either the &s.code;ScreenRec&e.code; (DIX level) or

+&s.code;ScrnInfoRec&e.code; (XFree86 common layer level).

+&s.code;ScreenRec&e.code; storage persists only for a single server

+generation, and &s.code;ScrnInfoRec&e.code; storage persists across

+generations for the lifetime of the server.

+

+The &s.code;ScreenRec&e.code; &s.code;devPrivates&e.code; data must be

+reallocated/initialised at the start of each new generation.  This is

+normally done from the &s.code;ChipScreenInit()&e.code; function, and

+Init functions for other modules that it calls.  Data allocated in this

+way should be freed by the driver's &s.code;ChipCloseScreen()&e.code;

+functions, and Close functions for other modules that it calls.  A new

+&s.code;devPrivates&e.code; entry is allocated by calling the

+&s.code;AllocateScreenPrivateIndex()&e.code; function.

+

+    <quote><p>

+    &s.code;int AllocateScreenPrivateIndex()&e.code;

+    <quote><p>

+      This function allocates a new element in the

+      &s.code;devPrivates&e.code; field of all currently existing

+      &s.code;ScreenRecs&e.code;.  The return value is the index of this

+      new element in the &s.code;devPrivates&e.code; array.  The

+      &s.code;devPrivates&e.code; field is of type

+      &s.code;DevUnion&e.code;:

+

+	<verb>

+        typedef union _DevUnion {

+            pointer             ptr;

+            long                val;

+            unsigned long       uval;

+            pointer             (*fptr)(void);

+        } DevUnion;

+	</verb>

+

+      which allows the element to be used for any of the above types.

+      It is commonly used as a pointer to data that the caller allocates

+      after the new index has been allocated.

+

+      This function will return &s.code;-1&e.code; when there is an

+      error allocating the new index.

+

+    </quote>

+    </quote>

+

+The &s.code;ScrnInfoRec&e.code; &s.code;privates&e.code; data persists

+for the life of the server, so only needs to be allocated once.  This

+should be done from the &s.code;ChipPreInit()&e.code; function, and Init

+functions for other modules that it calls.  Data allocated in this way

+should be freed by the driver's &s.code;ChipFreeScreen()&e.code; functions,

+and Free functions for other modules that it calls.  A new

+&s.code;privates&e.code; entry is allocated by calling the

+&s.code;xf86AllocateScrnInfoPrivateIndex()&e.code; function.

+

+

+    <quote><p>

+    &s.code;int xf86AllocateScrnInfoPrivateIndex()&e.code;

+    <quote><p>

+      This function allocates a new element in the &s.code;privates&e.code;

+      field of all currently existing &s.code;ScrnInfoRecs&e.code;.

+      The return value is the index of this new element in the

+      &s.code;privates&e.code; array.  The &s.code;privates&e.code;

+      field is of type &s.code;DevUnion&e.code;:

+

+        <verb>

+        typedef union _DevUnion {

+            pointer             ptr;

+            long                val;

+            unsigned long       uval;

+            pointer             (*fptr)(void);

+        } DevUnion;

+        </verb>

+

+      which allows the element to be used for any of the above types.

+      It is commonly used as a pointer to data that the caller allocates

+      after the new index has been allocated.

+

+      This function will not return when there is an error allocating

+      the new index.  When there is an error it will cause the server

+      to exit with a fatal error.  The similar function for allocation

+      privates in the &s.code;ScreenRec&e.code;

+      (&s.code;AllocateScreenPrivateIndex()&e.code;) differs in this

+      respect by returning &s.code;-1&e.code; when the allocation fails.

+

+    </quote>

+    </quote>

+

+<sect>Keeping Track of Bus Resources<label id="rac">

+<p>

+

+<sect1>Theory of Operation

+<p>

+

+The XFree86 common layer has knowledge of generic access control mechanisms

+for devices on certain bus systems (currently the PCI bus) as well as

+of methods to enable or disable access to the buses itself.  Furthermore

+it can access information on resources decoded by these devices and if

+necessary modify it.

+

+When first starting the Xserver collects all this information, saves it

+for restoration, checks it for consistency, and if necessary, corrects

+it.  Finally it disables all resources on a generic level prior to

+calling any driver function.

+

+When the &s.code;Probe()&e.code; function of each driver is called the

+device sections are matched against the devices found in the system.

+The driver may probe devices at this stage that cannot be identified by

+using device independent methods.  Access to all resources that can be

+controlled in a device independent way is disabled.  The

+&s.code;Probe()&e.code; function should register all non-relocatable

+resources at this stage.  If a resource conflict is found between

+exclusive resources the driver will fail immediately.  Optionally the

+driver might specify an &s.code;EntityInit()&e.code;,

+&s.code;EntityLeave()&e.code; and &s.code;EntityEnter()&e.code; function.

+

+&s.code;EntityInit()&e.code; can be used to disable any shared resources

+that are not controlled by the generic access control functions.  It is

+called prior to the PreInit phase regardless if an entity is active or

+not.  When calling the &s.code;EntityInit()&e.code;,

+&s.code;EntityEnter()&e.code; and &s.code;EntityLeave()&e.code; functions

+the common level will disable access to all other entities on a generic

+level.  Since the common level has no knowledge of device specific

+methods to disable access to resources it cannot be guaranteed that

+certain resources are not decoded by any other entity until the

+&s.code;EntityInit()&e.code; or &s.code;EntityEnter()&e.code; phase is

+finished.  Device drivers should therefore register all those resources

+which they are going to disable.  If these resources are never to be

+used by any driver function they may be flagged &s.code;ResInit&e.code;

+so that they can be removed from the resource list after processing all

+&s.code;EntityInit()&e.code; functions.  &s.code;EntityEnter()&e.code;

+should disable decoding of all resources which are not registered as

+exclusive and which are not handled by the generic access control in

+the common level.  The difference to &s.code;EntityInit()&e.code; is

+that the latter one is only called once during lifetime of the server.

+It can therefore be used to set up variables prior to disabling resources.

+&s.code;EntityLeave()&e.code; should restore the original state when

+exiting the server or switching to a different VT.  It also needs to

+disable device specific access functions if they need to be disabled on

+server exit or VT switch.  The default state is to enable them before

+giving up the VT.

+

+In &s.code;PreInit()&e.code; phase each driver should check if any

+sharable resources it has registered during &s.code;Probe()&e.code; has

+been denied and take appropriate action which could simply be to fail.

+If it needs to access resources it has disabled during

+&s.code;EntitySetup()&e.code; it can do so provided it has registered

+these and will disable them before returning from

+&s.code;PreInit()&e.code;.  This also applies to all other driver

+functions.  Several functions are provided to request resource ranges,

+register these, correct PCI config space and add replacements for the

+generic access functions.  Resources may be marked ``disabled'' or

+``unused'' during OPERATING stage.  Although these steps could also be

+performed in &s.code;ScreenInit()&e.code;, this is not desirable.

+

+Following &s.code;PreInit()&e.code; phase the common level determines

+if resource access control is needed.  This is the case if more than

+one screen is used.  If necessary the RAC wrapper module is loaded.  In

+&s.code;ScreenInit()&e.code; the drivers can decide which operations

+need to be placed under RAC.  Available are the frame buffer operations,

+the pointer operations and the colormap operations.  Any operation that

+requires resources which might be disabled during OPERATING state should

+be set to use RAC.  This can be specified separately for memory and IO

+resources.

+

+When &s.code;ScreenInit()&e.code; phase is done the common level will

+determine which shared resources are requested by more than one driver

+and set the access functions accordingly.  This is done following these

+rules:

+

+<enum>

+<item>The sharable resources registered by each entity are compared.  If

+   a resource is registered by more than one entity the entity will be

+   marked to need to share this resources type (&s.code;IO&e.code; or

+   &s.code;MEM&e.code;).

+

+<item>A resource marked ``disabled'' during OPERATING state will be ignored

+   entirely.

+

+<item>A resource marked ``unused'' will only conflicts with an overlapping

+   resource of an other entity if the second is actually in use during

+   OPERATING state.

+

+<item>If an ``unused'' resource was found to conflict however the entity

+   does not use any other resource of this type the entire resource type

+   will be disabled for that entity.

+</enum>

+

+The driver has the choice among different ways to control access to

+certain resources:

+

+<enum>

+<item>It can rely on the generic access functions.  This is probably the

+   most common case.  Here the driver only needs to register any resource

+   it is going to use.

+

+<item>It can replace the generic access functions by driver specific

+   ones.  This will mostly be used in cases where no generic access

+   functions are available.  In this case the driver has to make sure

+   these resources are disabled when entering the &s.code;PreInit()&e.code;

+   stage.  Since the replacement functions are registered in

+   &s.code;PreInit()&e.code; the driver will have to enable these

+   resources itself if it needs to access them during this state.  The

+   driver can specify if the replacement functions can control memory

+   and/or I/O resources separately.

+

+<item>The driver can enable resources itself when it needs them.  Each

+   driver function enabling them needs to disable them before it will

+   return.  This should be used if a resource which can be controlled

+   in a device dependent way is only required during SETUP state.  This

+   way it can be marked ``unused'' during OPERATING state.

+</enum>

+

+A resource which is decoded during OPERATING state however never accessed

+by the driver should be marked unused.

+

+Since access switching latencies are an issue during Xserver operation,

+the common level attempts to minimize the number of entities that need

+to be placed under RAC control.  When a wrapped operation is called,

+the &s.code;EnableAccess()&e.code; function is called before control is

+passed on.  &s.code;EnableAccess()&e.code; checks if a screen is under

+access control.  If not it just establishes bus routing and returns.

+If the screen needs to be under access control,

+&s.code;EnableAccess()&e.code; determines which resource types

+(&s.code;MEM&e.code;, &s.code;IO&e.code;) are required.  Then it tests

+if this access is already established.  If so it simply returns.  If

+not it disables the currently established access, fixes bus routing and

+enables access to all entities registered for this screen.

+

+Whenever a mode switch or a VT-switch is performed the common level will

+return to SETUP state.

+

+<sect1>Resource Types

+<p>

+

+Resource have certain properties.  When registering resources each range

+is accompanied by a flag consisting of the ORed flags of the different

+properties the resource has.  Each resource range may be classified

+according to

+

+<itemize>

+  <item>its physical properties i.e., if it addresses

+       memory (&s.code;ResMem&e.code;)  or

+       I/O space (&s.code;ResIo&e.code;),

+  <item>if it addresses a

+       block (&s.code;ResBlock&e.code;) or

+       sparse (&s.code;ResSparse&e.code;)

+    range,

+  <item>its access properties.

+</itemize>

+

+There are two known access properties:

+

+<itemize>

+  <item>&s.code;ResExclusive&e.code;

+    for resources which may not be shared with any other device and

+  <item>&s.code;ResShared&e.code;

+    for resources which can be disabled and therefore can be shared.

+</itemize>

+

+If it is necessary to test a resource against any type a generic access

+type &s.code;ResAny&e.code; is provided.  If this is set the resource

+will conflict with any resource of a different entity intersecting its

+range.  Further it can be specified that a resource is decoded however

+never used during any stage (&s.code;ResUnused&e.code;) or during

+OPERATING state (&s.code;ResUnusedOpr&e.code;).  A resource only visible

+during the init functions (ie.  &s.code;EntityInit()&e.code;,

+&s.code;EntityEnter()&e.code; and &s.code;EntityLeave()&e.code; should

+be registered with the flag &s.code;ResInit&e.code;.  A resource that

+might conflict with background resource ranges may be flagged with

+&s.code;ResBios&e.code;.  This might be useful when registering resources

+ranges that were assigned by the system Bios.

+

+Several predefined resource lists are available for VGA and 8514/A

+resources in &s.code;common/xf86Resources.h&e.code;.

+

+<sect1>Available Functions<label id="avail">

+<p>

+

+The functions provided for resource management are listed in their order

+of use in the driver.

+

+

+<sect2>Probe Phase

+<p>

+

+In this phase each driver detects those resources it is able to drive,

+creates an entity record for each of them, registers non-relocatable

+resources and allocates screens and adds the resources to screens.

+

+Two helper functions are provided for matching device sections in the

+xorg.conf file to the devices:

+

+    <quote><p>

+    &s.code;int xf86MatchPciInstances(const char *driverName, int vendorID,

+		&f.indent;SymTabPtr chipsets, PciChipsets *PCIchipsets,

+                &f.indent;GDevPtr *devList, int numDevs, DriverPtr drvp,

+                &f.indent;int **foundEntities)&e.code;

+    <quote><p>

+      This function finds matches between PCI cards that a driver supports

+      and config file device sections.  It is intended for use in the

+      &s.code;ChipProbe()&e.code; function of drivers for PCI cards.

+      Only probed PCI devices with a vendor ID matching

+      &s.code;vendorID&e.code; are considered.  &s.code;devList&e.code;

+      and &s.code;numDevs&e.code; are typically those found from

+      calling &s.code;xf86MatchDevice()&e.code;, and represent the active

+      config file device sections relevant to the driver.

+      &s.code;PCIchipsets&e.code; is a table that provides a mapping

+      between the PCI device IDs, the driver's internal chipset tokens

+      and a list of fixed resources.

+

+      When a device section doesn't have a &s.key;BusID&e.key; entry it

+      can only match the primary video device.  Secondary devices are

+      only matched with device sections that have a matching

+      &s.key;BusID&e.key; entry.

+

+      Once the preliminary matches have been found, a final match is

+      confirmed by checking if the chipset override, ChipID override or

+      probed PCI chipset type match one of those given in the

+      &s.code;chipsets&e.code; and &s.code;PCIchipsets&e.code; lists.

+      The &s.code;PCIchipsets&e.code; list includes a list of the PCI

+      device IDs supported by the driver.  The list should be terminated

+      with an entry with PCI ID &s.code;-1&e.code;".  The

+      &s.code;chipsets&e.code; list is a table mapping the driver's

+      internal chipset tokens to names, and should be terminated with

+      a &s.code;NULL&e.code; entry.  Only those entries with a

+      corresponding entry in the &s.code;PCIchipsets&e.code; list are

+      considered.  The order of precedence is: config file chipset,

+      config file ChipID, probed PCI device ID.

+

+      In cases where a driver handles PCI chipsets with more than one

+      vendor ID, it may set &s.code;vendorID&e.code; to

+      &s.code;0&e.code;, and OR each devID in the list with (the

+      vendor&nbsp;ID&nbsp;&lt;&lt;&nbsp;16).

+

+      Entity index numbers for confirmed matches are returned as an

+      array via &s.code;foundEntities&e.code;.  The PCI information,

+      chipset token and device section for each match are found in the

+      &s.code;EntityInfoRec&e.code; referenced by the indices.

+

+      The function return value is the number of confirmed matches.  A

+      return value of &s.code;-1&e.code; indicates an internal error.

+      The returned &s.code;foundEntities&e.code; array should be freed

+      by the driver with &s.code;xfree()&e.code; when it is no longer

+      needed in cases where the return value is greater than zero.

+

+    </quote>

+

+    &s.code;int xf86MatchIsaInstances(const char *driverName,

+		     &f.indent;SymTabPtr chipsets, IsaChipsets *ISAchipsets,

+		     &f.indent;DriverPtr drvp, FindIsaDevProc FindIsaDevice,

+		     &f.indent;GDevPtr *devList, int numDevs,

+					int **foundEntities)&e.code;

+    <quote><p>

+      This function finds matches between ISA cards that a driver supports

+      and config file device sections.  It is intended for use in the

+      &s.code;ChipProbe()&e.code; function of drivers for ISA cards.

+      &s.code;devList&e.code; and &s.code;numDevs&e.code; are

+      typically those found from calling &s.code;xf86MatchDevice()&e.code;,

+      and represent the active config file device sections relevant to

+      the driver.  &s.code;ISAchipsets&e.code; is a table that provides

+      a mapping between the driver's internal chipset tokens and the

+      resource classes.  &s.code;FindIsaDevice&e.code; is a

+      driver-provided function that probes the hardware and returns the

+      chipset token corresponding to what was detected, and

+      &s.code;-1&e.code; if nothing was detected.

+

+      If the config file device section contains a chipset entry, then

+      it is checked against the &s.code;chipsets&e.code; list.  When

+      no chipset entry is present, the &s.code;FindIsaDevice&e.code;

+      function is called instead.

+

+      Entity index numbers for confirmed matches are returned as an

+      array via &s.code;foundEntities&e.code;.  The chipset token and

+      device section for each match are found in the

+      &s.code;EntityInfoRec&e.code; referenced by the indices.

+

+      The function return value is the number of confirmed matches.  A

+      return value of &s.code;-1&e.code; indicates an internal error.

+      The returned &s.code;foundEntities&e.code; array should be freed

+      by the driver with &s.code;xfree()&e.code; when it is no longer

+      needed in cases where the return value is greater than zero.

+

+    </quote>

+    </quote>

+

+These two helper functions make use of several core functions that are

+available at the driver level:

+

+    <quote><p>

+    &s.code;Bool xf86ParsePciBusString(const char *busID, int *bus,

+			&f.indent;int *device, int *func)&e.code;

+    <quote><p>

+      Takes a &s.code;BusID&e.code; string, and if it is in the correct

+      format, returns the PCI &s.code;bus&e.code;, &s.code;device&e.code;,

+      &s.code;func&e.code; values that it indicates.  The format of the

+      string is expected to be "PCI:bus:device:func" where each of `bus',

+      `device' and `func' are decimal integers.  The ":func" part may

+      be omitted, and the func value assumed to be zero, but this isn't

+      encouraged.  The "PCI" prefix may also be omitted.  The prefix

+      "AGP" is currently equivalent to the "PCI" prefix.  If the string

+      isn't a valid PCI BusID, the return value is &s.code;FALSE&e.code;.

+

+    </quote>

+

+

+    &s.code;Bool xf86ComparePciBusString(const char *busID, int bus,

+			&f.indent;int device, int func)&e.code;

+    <quote><p>

+      Compares a &s.code;BusID&e.code; string with PCI &s.code;bus&e.code;,

+      &s.code;device&e.code;, &s.code;func&e.code; values.  If they

+      match &s.code;TRUE&e.code; is returned, and &s.code;FALSE&e.code;

+      if they don't.

+

+    </quote>

+

+    &s.code;Bool xf86ParseIsaBusString(const char *busID)&e.code;

+    <quote><p>

+      Compares a &s.code;BusID&e.code; string with the ISA bus ID string

+      ("ISA" or "ISA:").  If they match &s.code;TRUE&e.code; is returned,

+      and &s.code;FALSE&e.code; if they don't.

+

+    </quote>

+

+    &s.code;Bool xf86CheckPciSlot(int bus, int device, int func)&e.code;

+    <quote><p>

+      Checks if the PCI slot &s.code;bus:device:func&e.code; has been

+      claimed.  If so, it returns &s.code;FALSE&e.code;, and otherwise

+      &s.code;TRUE&e.code;.

+

+    </quote>

+

+    &s.code;int xf86ClaimPciSlot(int bus, int device, int func, DriverPtr drvp,

+			&f.indent;int chipset, GDevPtr dev, Bool active)&e.code;

+    <quote><p>

+      This function is used to claim a PCI slot, allocate the associated

+      entity record and initialise their data structures.  The return

+      value is the index of the newly allocated entity record, or

+      &s.code;-1&e.code; if the claim fails.  This function should always

+      succeed if &s.code;xf86CheckPciSlot()&e.code; returned

+      &s.code;TRUE&e.code; for the same PCI slot.

+

+    </quote>

+

+    &s.code;Bool xf86IsPrimaryPci(void)&e.code;

+    <quote><p>

+      This function returns &s.code;TRUE&e.code; if the primary card is

+      a PCI device, and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+

+    &s.code;int xf86ClaimIsaSlot(DriverPtr drvp, int chipset,

+			&f.indent;GDevPtr dev, Bool active)&e.code;

+    <quote><p>

+      This allocates an entity record entity and initialise the data

+      structures.  The return value is the index of the newly allocated

+      entity record.

+

+    </quote>

+

+    &s.code;Bool xf86IsPrimaryIsa(void)&e.code;

+    <quote><p>

+      This function returns &s.code;TRUE&e.code; if the primary card is

+      an ISA (non-PCI) device, and &s.code;FALSE&e.code; otherwise.

+

+    </quote>

+    </quote>

+

+Two helper functions are provided to aid configuring entities:

+    <quote><p>

+    &s.code;ScrnInfoPtr xf86ConfigPciEntity(ScrnInfoPtr pScrn,

+                                 &f.indent;int scrnFlag, int entityIndex,

+                                 &f.indent;PciChipsets *p_chip,

+                                 &f.indent;resList res, EntityProc init,

+                                 &f.indent;EntityProc enter, EntityProc leave,

+                                 &f.indent;pointer private)&e.code;

+    <p>

+    &s.code;ScrnInfoPtr xf86ConfigIsaEntity(ScrnInfoPtr pScrn,

+                                 &f.indent;int scrnFlag, int entityIndex,

+                                 &f.indent;IsaChipsets *i_chip,

+                                 &f.indent;resList res, EntityProc init,

+                                 &f.indent;EntityProc enter, EntityProc leave,

+                                 &f.indent;pointer private)&e.code;

+    <quote><p>

+      These functions are used to register the non-relocatable resources

+      for an entity, and the optional entity-specific &s.code;Init&e.code;, &s.code;Enter&e.code; and

+      &s.code;Leave&e.code; functions.  Usually the list of fixed resources is obtained

+      from the Isa/PciChipsets lists.  However an additional list of

+      resources may be passed.  Generally this is not required.

+      For active entities a &s.code;ScrnInfoRec&e.code; is allocated

+      if the &s.code;pScrn&e.code; argument is &s.code;NULL&e.code;.

+The

+      return value is &s.code;TRUE&e.code; when successful.  The init, enter, leave

+      functions are defined as follows:

+

+        <quote>

+        &s.code;typedef void (*EntityProc)(int entityIndex,

+			&f.indent;pointer private)&e.code;

+        </quote>

+

+      They are passed the entity index and a pointer to a private scratch

+      area.  This can be set up during &s.code;Probe()&e.code; and

+      its address can be passed to

+      &s.code;xf86ConfigIsaEntity()&e.code; and

+      &s.code;xf86ConfigPciEntity()&e.code; as the last argument.

+

+    </quote>

+    </quote>

+

+These two helper functions make use of several core functions that are

+available at the driver level:

+    <quote><p>

+    &s.code;void xf86ClaimFixedResources(resList list, int entityIndex)&e.code;

+    <quote><p>

+      This function registers the non-relocatable resources which cannot

+      be disabled and which therefore would cause the server to fail

+      immediately if they were found to conflict.  It also records

+      non-relocatable but sharable resources for processing after the

+      &s.code;Probe()&e.code; phase.

+

+    </quote>

+

+    &s.code;Bool xf86SetEntityFuncs(int entityIndex, EntityProc init,

+			&f.indent;EntityProc enter, EntityProc leave, pointer)&e.code;

+    <quote><p>

+      This function registers with an entity the &s.code;init&e.code;,

+      &s.code;enter&e.code;, &s.code;leave&e.code; functions along

+      with the pointer to their private area.

+

+    </quote>

+

+    &s.code;void xf86AddEntityToScreen(ScrnInfoPtr pScrn, int entityIndex)&e.code;

+    <quote><p>

+      This function associates the entity referenced by

+      &s.code;entityIndex&e.code; with the screen.

+

+    </quote>

+    </quote>

+

+<sect2>PreInit Phase

+<p>

+

+During this phase the remaining resources should be registered.

+&s.code;PreInit()&e.code; should call &s.code;xf86GetEntityInfo()&e.code;

+to obtain a pointer to an &s.code;EntityInfoRec&e.code; for each entity

+it is able to drive and check if any resource are listed in its

+&s.code;resources&e.code; field.  If resources registered in the Probe

+phase have been rejected in the post-Probe phase

+(&s.code;resources&e.code; is non-&s.code;NULL&e.code;), then the driver should

+decide if it can continue without using these or if it should fail.

+

+    <quote><p>

+    &s.code;EntityInfoPtr xf86GetEntityInfo(int entityIndex)&e.code;

+    <quote><p>

+      This function returns a pointer to the &s.code;EntityInfoRec&e.code;

+      referenced by &s.code;entityIndex&e.code;.  The returned

+      &s.code;EntityInfoRec&e.code; should be freed with

+      &s.code;xfree()&e.code; when no longer needed.

+

+    </quote>

+    </quote>

+Several functions are provided to simplify resource registration:

+    <quote><p>

+    &s.code;Bool xf86IsEntityPrimary(int entityIndex)&e.code;

+    <quote><p>

+      This function returns &s.code;TRUE&e.code; if the entity referenced

+      by &s.code;entityIndex&e.code; is the primary display device (i.e.,

+      the one initialised at boot time and used in text mode).

+

+    </quote>

+

+    &s.code;Bool xf86IsScreenPrimary(int scrnIndex)&e.code;

+    <quote><p>

+      This function returns &s.code;TRUE&e.code; if the primary entity

+      is registered with the screen referenced by

+      &s.code;scrnIndex&e.code;.

+

+    </quote>

+

+    &s.code;pciVideoPtr xf86GetPciInfoForEntity(int entityIndex)&e.code;

+    <quote><p>

+      This function returns a pointer to the &s.code;pciVideoRec&e.code;

+      for the specified entity.  If the entity is not a PCI device,

+      &s.code;NULL&e.code; is returned.

+

+    </quote>

+    </quote>

+

+The primary function for registration of resources is:

+    <quote><p>

+    &s.code;resPtr xf86RegisterResources(int entityIndex, resList list,

+			&f.indent;int access)&e.code;

+    <quote><p>

+      This function tries to register the resources in

+      &s.code;list&e.code;.  If list is &s.code;NULL&e.code; it tries

+      to determine the resources automatically.  This only works for

+      entities that provide a generic way to read out the resource ranges

+      they decode.  So far this is only the case for PCI devices.  By

+      default the PCI resources are registered as shared

+      (&s.code;ResShared&e.code;) if the driver wants to set a different

+      access type it can do so by specifying the access flags in the

+      third argument.  A value of &s.code;0&e.code; means to use the

+      default settings.  If for any reason the resource broker is not

+      able to register some of the requested resources the function will

+      return a pointer to a list of the failed ones.  In this case the

+      driver may be able to move the resource to different locations.

+      In case of PCI bus entities this is done by passing the list of

+      failed resources to &s.code;xf86ReallocatePciResources()&e.code;.

+      When the registration succeeds, the return value is

+      &s.code;NULL&e.code;.

+

+    </quote>

+

+    &s.code;resPtr xf86ReallocatePciResources(int entityIndex, resPtr pRes)&e.code;

+    <quote><p>

+      This function takes a list of PCI resources that need to be

+      reallocated and returns &s.code;NULL&e.code when all relocations are

+      successful.

+      &s.code;xf86RegisterResources()&e.code; should be called again to

+      register the relocated resources with the broker.

+      If the reallocation fails, a list of the resources that could not be

+      relocated is returned.

+

+    </quote>

+    </quote>

+

+Two functions are provided to obtain a resource range of a given type:

+    <quote><p>

+    &s.code;resRange xf86GetBlock(long type, memType size,

+			&f.indent;memType window_start, memType window_end,

+			&f.indent;memType align_mask, resPtr avoid)&e.code;

+    <quote><p>

+      This function tries to find a block range of size

+      &s.code;size&e.code; and type &s.code;type&e.code; in a window

+      bound by &s.code;window_start&e.code; and &s.code;window_end&e.code;

+      with the alignment specified in &s.code;align_mask&e.code;.

+      Optionally a list of resource ranges which should be avoided within

+      the window can be supplied.  On failure a zero-length range of

+      type &s.code;ResEnd&e.code; will be returned.

+

+    </quote>

+    &s.code;resRange xf86GetSparse(long type, memType fixed_bits,

+			&f.indent;memType decode_mask, memType address_mask,

+			&f.indent;resPtr avoid)&e.code;

+    <quote><p>

+      This function is like the previous one, but attempts to find a

+      sparse range instead of a block range.  Here three values have to

+      be specified: the &s.code;address_mask&e.code; which marks all

+      bits of the mask part of the address, the &s.code;decode_mask&e.code;

+      which masks out the bits which are hardcoded and are therefore

+      not available for relocation and the values of the fixed bits.

+      The function tries to find a base that satisfies the given condition.

+      If the function fails it will return a zero range of type

+      &s.code;ResEnd&e.code;.  Optionally it might be passed a list of

+      resource ranges to avoid.

+

+    </quote>

+    </quote>

+

+Some PCI devices are broken in the sense that they return invalid size

+information for a certain resource.  In this case the driver can supply

+the correct size and make sure that the resource range allocated for

+the card is large enough to hold the address range decoded by the card.

+The function &s.code;xf86FixPciResource()&e.code; can be used to do this:

+    <quote><p>

+    &s.code;Bool xf86FixPciResource(int entityIndex, unsigned int prt,

+				&f.indent;CARD32 alignment, long type)&e.code;

+    <quote><p>

+      This function fixes a PCI resource allocation.  The

+      &s.code;prt&e.code; parameter contains the number of the PCI base

+      register that needs to be fixed (&s.code;0-5&e.code;, and

+      &s.code;6&e.code; for the BIOS base register).  The size is

+      specified by the alignment.  Since PCI resources need to span an

+      integral range of size &s.code;2^n&e.code;, the alignment also

+      specifies the number of addresses that will be decoded.  If the

+      driver specifies a type mask it can override the default type for

+      PCI resources which is &s.code;ResShared&e.code;.  The resource

+      broker needs to know that to find a matching resource range.  This

+      function should be called before calling

+      &s.code;xf86RegisterResources()&e.code;.  The return value is

+      &s.code;TRUE&e.code; when the function succeeds.

+

+    </quote>

+

+    &s.code;Bool xf86CheckPciMemBase(pciVideoPtr pPci, memType base)&e.code;

+    <quote><p>

+      This function checks that the memory base address specified matches

+      one of the PCI base address register values for the given PCI

+      device.  This is mostly used to check that an externally provided

+      base address (e.g., from a config file) matches an actual value

+      allocated to a device.

+

+    </quote>

+    </quote>

+

+The driver may replace the generic access control functions for an entity.

+This is done with the &s.code;xf86SetAccessFuncs()&e.code;:

+    <quote><p>

+    &s.code;void xf86SetAccessFuncs(EntityInfoPtr pEnt,

+                        &f.indent;xf86SetAccessFuncPtr funcs,

+			&f.indent;xf86SetAccessFuncPtr oldFuncs)&e.code;

+    <quote><p>

+     with:

+    </quote>

+

+    <verb>

+      typedef struct {

+          xf86AccessPtr mem;

+          xf86AccessPtr io;

+          xf86AccessPtr io_mem;

+      } xf86SetAccessFuncRec, *xf86SetAccessFuncPtr;

+    </verb>

+

+    <quote><p>

+      The driver can pass three functions: one for I/O access, one for

+      memory access and one for combined memory and I/O access.  If the

+      memory access and combined access functions are identical the

+      common level assumes that the memory access cannot be controlled

+      independently of I/O access, if the I/O access function and the

+      combined access functions are the same it is assumed that I/O can

+      not be controlled independently.  If memory and I/O have to be

+      controlled together all three values should be the same.  If a

+      non &s.code;NULL&e.code; value is passed as third argument it is

+      interpreted as an address where to store the old access record.

+      If the third argument is &s.code;NULL&e.code; it will be assumed

+      that the generic access should be enabled before replacing the

+      access functions.  Otherwise it will be disabled.  The driver may

+      enable them itself using the returned values.  It should do this

+      from its replacement access functions as the generic access may

+      be disabled by the common level on certain occasions.  If replacement

+      functions are specified they must control all resources of the

+      specific type registered for the entity.

+

+    </quote>

+    </quote>

+

+To find out if a specific resource range conflicts with another

+resource the &s.code;xf86ChkConflict()&e.code; function may be used:

+    <quote><p>

+    &s.code;memType xf86ChkConflict(resRange *rgp, int entityIndex)&e.code;

+    <quote><p>

+      This function checks if the resource range &s.code;rgp&e.code; of

+      for the specified entity conflicts with with another resource.

+      If a conflict is found, the address of the start of the conflict

+      is returned.  The return value is zero when there is no conflict.

+

+    </quote>

+    </quote>

+

+The OPERATING state properties of previously registered fixed resources

+can be set with the &s.code;xf86SetOperatingState()&e.code; function:

+    <quote><p>

+    &s.code;resPtr xf86SetOperatingState(resList list, int entityIndex,

+			&f.indent;int mask)&e.code;

+    <quote><p>

+      This function is used to set the status of a resource during

+      OPERATING state.  &s.code;list&e.code; holds a list to which

+      &s.code;mask&e.code; is to be applied.  The parameter

+      &s.code;mask&e.code; may have the value &s.code;ResUnusedOpr&e.code;

+      and &s.code;ResDisableOpr&e.code;.  The first one should be used

+      if a resource isn't used by the driver during OPERATING state

+      although it is decoded by the device, while the latter one indicates

+      that the resource is not decoded during OPERATING state.  Note

+      that the resource ranges have to match those specified during

+      registration.  If a range has been specified starting at

+      &s.code;A&e.code; and ending at &s.code;B&e.code; and suppose

+      &s.code;C&e.code; us a value satisfying

+      &s.code;A&nbsp;&lt;&nbsp;C&nbsp;&lt;&nbsp;B&e.code; one may not

+      specify the resource range &s.code;(A,B)&e.code; by splitting it

+      into two ranges &s.code;(A,C)&e.code; and &s.code;(C,B)&e.code;.

+

+    </quote>

+    </quote>

+

+The following two functions are provided for special cases:

+    <quote><p>

+    &s.code;void xf86RemoveEntityFromScreen(ScrnInfoPtr pScrn, int entityIndex)&e.code;

+    <quote><p>

+      This function may be used to remove an entity from a screen.  This

+      only makes sense if a screen has more than one entity assigned or

+      the screen is to be deleted.  No test is made if the screen has

+      any entities left.

+

+    </quote>

+

+    &s.code;void xf86DeallocateResourcesForEntity(int entityIndex, long type)&e.code;

+    <quote><p>

+      This function deallocates all resources of a given type registered

+      for a certain entity from the resource broker list.

+

+    </quote>

+    </quote>

+

+<sect2>ScreenInit Phase

+<p>

+

+All that is required in this phase is to setup the RAC flags.  Note that

+it is also permissible to set these flags up in the PreInit phase.  The

+RAC flags are held in the &s.code;racIoFlags&e.code; and &s.code;racMemFlags&e.code; fields of the

+&s.code;ScrnInfoRec&e.code; for each screen.  They specify which graphics operations

+might require the use of shared resources.  This can be specified

+separately for memory and I/O resources.  The available flags are defined

+in &s.code;rac/xf86RAC.h&e.code;.  They are:

+

+    &s.code;RAC_FB&e.code;

+	<quote>

+	for framebuffer operations (including hw acceleration)

+	</quote>

+    &s.code;RAC_CURSOR&e.code;

+	<quote>

+	for Cursor operations

+        (??? I'm not sure if we need this for SW cursor it depends

+         on which level the sw cursor is drawn)

+	</quote>

+    &s.code;RAC_COLORMAP&e.code;

+	<quote>

+	for colormap operations

+	</quote>

+    &s.code;RAC_VIEWPORT&e.code;

+	<quote>

+	for the call to &s.code;ChipAdjustFrame()&e.code; </quote>

+

+

+The flags are ORed together.

+

+<sect>Config file ``Option'' entries<label id="options">

+<p>

+

+Option entries are permitted in most sections and subsections of the

+config file.  There are two forms of option entries:

+

+<descrip>

+<tag>Option "option-name"</tag>

+	A boolean option.

+<tag>Option "option-name" "option-value"</tag>

+	An option with an arbitrary value.

+</descrip>

+

+The option entries are handled by the parser, and a list of the parsed

+options is included with each of the appropriate data structures that

+the drivers have access to.  The data structures used to hold the option

+information are opaque to the driver, and a driver must not access the

+option data directly.  Instead, the common layer provides a set of

+functions that may be used to access, check and manipulate the option

+data.

+

+First, the low level option handling functions.  In most cases drivers

+would not need to use these directly.

+

+    <quote><p>

+    &s.code;pointer xf86FindOption(pointer options, const char *name)&e.code;

+    <quote><p>

+      Takes a list of options and an option name, and returns a handle

+      for the first option entry in the list matching the name.  Returns

+      &s.code;NULL&e.code; if no match is found.

+

+    </quote>

+

+    &s.code;char *xf86FindOptionValue(pointer options, const char *name)&e.code;

+    <quote><p>

+      Takes a list of options and an option name, and returns the value

+      associated with the first option entry in the list matching the

+      name.  If the matching option has no value, an empty string

+      (&s.code;""&e.code;) is returned.  Returns &s.code;NULL&e.code;

+      if no match is found.

+

+    </quote>

+

+    &s.code;void xf86MarkOptionUsed(pointer option)&e.code;

+    <quote><p>

+      Takes a handle for an option, and marks that option as used.

+

+    </quote>

+

+    &s.code;void xf86MarkOptionUsedByName(pointer options, const char *name)&e.code;

+    <quote><p>

+      Takes a list of options and an option name and marks the first

+      option entry in the list matching the name as used.

+

+    </quote>

+    </quote>

+

+

+Next, the higher level functions that most drivers would use.

+    <quote><p>

+    &s.code;void xf86CollectOptions(ScrnInfoPtr pScrn, pointer extraOpts)&e.code;

+    <quote><p>

+      Collect the options from each of the config file sections used by

+      the screen (&s.code;pScrn&e.code;) and return the merged list as

+      &s.code;pScrn-&gt;options&e.code;.  This function requires that

+      &s.code;pScrn-&gt;confScreen&e.code;, &s.code;pScrn-&gt;display&e.code;,

+      &s.code;pScrn-&gt;monitor&e.code;,

+      &s.code;pScrn-&gt;numEntities&e.code;, and

+      &s.code;pScrn-&gt;entityList&e.code; are initialised.

+      &s.code;extraOpts&e.code; may optionally be set to an additional

+      list of options to be combined with the others.  The order of

+      precedence for options is &s.code;extraOpts&e.code;, display,

+      confScreen, monitor, device.

+

+    </quote>

+

+    &s.code;void xf86ProcessOptions(int scrnIndex, pointer options,

+			&f.indent;OptionInfoPtr optinfo)&e.code;

+    <quote><p>

+      Processes a list of options according to the information in the

+      array of &s.code;OptionInfoRecs&e.code; (&s.code;optinfo&e.code;).

+      The resulting information is stored in the &s.code;value&e.code;

+      fields of the appropriate &s.code;optinfo&e.code; entries.  The

+      &s.code;found&e.code; fields are set to &s.code;TRUE&e.code;

+      when an option with a value of the correct type if found, and

+      &s.code;FALSE&e.code; otherwise.  The &s.code;type&e.code; field

+      is used to determine the expected value type for each option.

+      Each option in the list of options for which there is a name match

+      (but not necessarily a value type match) is marked as used.

+      Warning messages are printed when option values don't match the

+      types specified in the optinfo data.

+

+      NOTE: If this function is called before a driver's screen number

+      is known (e.g., from the &s.code;ChipProbe()&e.code; function) a

+      &s.code;scrnIndex&e.code; value of &s.code;-1&e.code; should be

+      used.

+

+      NOTE 2: Given that this function stores into the

+      &s.code;OptionInfoRecs&e.code; pointed to by &s.code;optinfo&e.code,

+      the caller should ensure the &s.code;OptionInfoRecs&e.code; are

+      (re-)initialised before the call, especially if the caller expects

+      to use the predefined option values as defaults.

+

+      The &s.code;OptionInfoRec&e.code; is defined as follows:

+

+      <verb>

+      typedef struct {

+          double freq;

+          int units;

+      } OptFrequency;

+

+      typedef union {

+          unsigned long       num;

+          char *              str;

+          double              realnum;

+          Bool                bool;

+          OptFrequency        freq;

+      } ValueUnion;

+

+      typedef enum {

+          OPTV_NONE = 0,

+          OPTV_INTEGER,

+          OPTV_STRING,  /* a non-empty string */

+          OPTV_ANYSTR,  /* Any string, including an empty one */

+          OPTV_REAL,

+          OPTV_BOOLEAN,

+          OPTV_PERCENT,

+          OPTV_FREQ

+      } OptionValueType;

+

+      typedef enum {

+          OPTUNITS_HZ = 1,

+          OPTUNITS_KHZ,

+          OPTUNITS_MHZ

+      } OptFreqUnits;

+

+      typedef struct {

+          int                 token;

+          const char*         name;

+          OptionValueType     type;

+          ValueUnion          value;

+          Bool                found;

+      } OptionInfoRec, *OptionInfoPtr;

+      </verb>

+

+      &s.code;OPTV_FREQ&e.code; can be used for options values that are

+      frequencies.  These values are a floating point number with an

+      optional unit name appended.  The unit name can be one of "Hz",

+      "kHz", "k", "MHz", "M".  The multiplier associated with the unit

+      is stored in &s.code;freq.units&e.code;, and the scaled frequency

+      is stored in &s.code;freq.freq&e.code;.  When no unit is specified,

+      &s.code;freq.units&e.code; is set to &s.code;0&e.code;, and

+      &s.code;freq.freq&e.code; is unscaled.

+

+      &s.code;OPTV_PERCENT&e.code; can be used for option values that are

+      specified in percent (e.g. "20%"). These values are a floating point

+      number with a percent sign appended. If the percent sign is missing,

+      the parser will fail to match the value.

+

+      Typical usage is to setup an array of

+      &s.code;OptionInfoRecs&e.code; with all fields initialised.

+      The &s.code;value&e.code; and &s.code;found&e.code; fields get

+      set by &s.code;xf86ProcessOptions()&e.code;.  For cases where the

+      value parsing is more complex, the driver should specify

+      &s.code;OPTV_STRING&e.code;, and parse the string itself.  An

+      example of using this option handling is included in the

+      <ref id="sample" name="Sample Driver"> section.

+

+    </quote>

+

+    &s.code;void xf86ShowUnusedOptions(int scrnIndex, pointer options)&e.code;

+    <quote><p>

+      Prints out warning messages for each option in the list of options

+      that isn't marked as used.  This is intended to show options that

+      the driver hasn't recognised.  It would normally be called near

+      the end of the &s.code;ChipScreenInit()&e.code; function, but only

+      when &s.code;serverGeneration&nbsp;==&nbsp;1&e.code;.

+

+    </quote>

+

+    &s.code;OptionInfoPtr xf86TokenToOptinfo(const OptionInfoRec *table,

+			&f.indent;int token)&e.code;

+

+    <quote><p>

+      Returns a pointer to the &s.code;OptionInfoRec&e.code; in

+      &s.code;table&e.code; with a token field matching

+      &s.code;token&e.code;.  Returns &s.code;NULL&e.code; if no match

+      is found.

+

+    </quote>

+

+    &s.code;Bool xf86IsOptionSet(const OptionInfoRec *table, int token)&e.code;

+    <quote><p>

+      Returns the &s.code;found&e.code; field of the

+      &s.code;OptionInfoRec&e.code; in &s.code;table&e.code; with a

+      &s.code;token&e.code; field matching &s.code;token&e.code;.  This

+      can be used for options of all types.  Note that for options of

+      type &s.code;OPTV_BOOLEAN&e.code;, it isn't sufficient to check

+      this to determine the value of the option.  Returns

+      &s.code;FALSE&e.code; if no match is found.

+

+    </quote>

+

+    &s.code;char *xf86GetOptValString(const OptionInfoRec *table, int token)&e.code;

+    <quote><p>

+      Returns the &s.code;value.str&e.code; field of the

+      &s.code;OptionInfoRec&e.code; in &s.code;table&e.code; with a

+      token field matching &s.code;token&e.code;.  Returns

+      &s.code;NULL&e.code; if no match is found.

+

+    </quote>

+

+    &s.code;Bool xf86GetOptValInteger(const OptionInfoRec *table, int token,

+			&f.indent;int *value)&e.code;

+    <quote><p>

+      Returns via &s.code;*value&e.code; the &s.code;value.num&e.code;

+      field of the &s.code;OptionInfoRec&e.code; in &s.code;table&e.code;

+      with a &s.code;token&e.code; field matching &s.code;token&e.code;.

+      &s.code;*value&e.code; is only changed when a match is found so

+      it can be safely initialised with a default prior to calling this

+      function.  The function return value is as for

+      &s.code;xf86IsOptionSet()&e.code;.

+

+    </quote>

+

+    &s.code;Bool xf86GetOptValULong(const OptionInfoRec *table, int token,

+			&f.indent;unsigned long *value)&e.code;

+    <quote><p>

+      Like &s.code;xf86GetOptValInteger()&e.code;, except the value is

+      treated as an &s.code;unsigned long&e.code;.

+

+    </quote>

+

+    &s.code;Bool xf86GetOptValReal(const OptionInfoRec *table, int token,

+			&f.indent;double *value)&e.code;

+    <quote><p>

+      Like &s.code;xf86GetOptValInteger()&e.code;, except that

+      &s.code;value.realnum&e.code; is used.

+

+    </quote>

+

+    &s.code;Bool xf86GetOptValFreq(const OptionInfoRec *table, int token,

+			&f.indent;OptFreqUnits expectedUnits, double *value)&e.code;

+    <quote><p>

+      Like &s.code;xf86GetOptValInteger()&e.code;, except that the

+      &s.code;value.freq&e.code; data is returned.  The frequency value

+      is scaled to the units indicated by &s.code;expectedUnits&e.code;.

+      The scaling is exact when the units were specified explicitly in

+      the option's value.  Otherwise, the &s.code;expectedUnits&e.code;

+      field is used as a hint when doing the scaling.  In this case,

+      values larger than &s.code;1000&e.code; are assumed to have be

+      specified in the next smallest units.  For example, if the Option

+      value is "10000" and expectedUnits is &s.code;OPTUNITS_MHZ&e.code;,

+      the value returned is &s.code;10&e.code;.

+

+    </quote>

+

+    &s.code;Bool xf86GetOptValBool(const OptionInfoRec *table, int token, Bool *value)&e.code;

+    <quote><p>

+      This function is used to check boolean options

+      (&s.code;OPTV_BOOLEAN&e.code;).  If the function return value is

+      &s.code;FALSE&e.code;, it means the option wasn't set.  Otherwise

+      &s.code;*value&e.code; is set to the boolean value indicated by

+      the option's value.  No option &s.code;value&e.code; is interpreted

+      as &s.code;TRUE&e.code;.  Option values meaning &s.code;TRUE&e.code;

+      are "1", "yes", "on", "true", and option values meaning

+      &s.code;FALSE&e.code; are "0", "no", "off", "false".  Option names

+      both with the "no" prefix in their names, and with that prefix

+      removed are also checked and handled in the obvious way.

+      &s.code;*value&e.code; is not changed when the option isn't present.

+      It should normally be set to a default value before calling this

+      function.

+

+    </quote>

+

+    &s.code;Bool xf86ReturnOptValBool(const OptionInfoRec *table, int token, Bool def)&e.code;

+    <quote><p>

+      This function is used to check boolean options

+      (&s.code;OPTV_BOOLEAN&e.code;).  If the option is set, its value

+      is returned.  If the options is not set, the default value specified

+      by &s.code;def&e.code; is returned.  The option interpretation is

+      the same as for &s.code;xf86GetOptValBool()&e.code;.

+

+    </quote>

+

+    &s.code;int xf86NameCmp(const char *s1, const char *s2)&e.code;

+    <quote><p>

+      This function should be used when comparing strings from the config

+      file with expected values.  It works like &s.code;strcmp()&e.code;,

+      but is not case sensitive and space, tab, and `<tt>_</tt>' characters

+      are ignored in the comparison.  The use of this function isn't

+      restricted to parsing option values.  It may be used anywhere

+      where this functionality required.

+

+    </quote>

+    </quote>

+

+<sect>Modules, Drivers, Include Files and Interface Issues

+<p>

+

+NOTE: this section is incomplete.

+

+

+<sect1>Include files

+<p>

+

+The following include files are typically required by video drivers:

+

+  <quote><p>

+  All drivers should include these:

+  <quote>

+    &s.code;"xf86.h"&nl;

+    "xf86_OSproc.h"&nl;

+    "xf86_ansic.h"&nl;

+    "xf86Resources.h"&e.code;

+  </quote>

+  Wherever inb/outb (and related things) are used the following should be

+  included:

+  <quote>

+    &s.code;"compiler.h"&e.code;

+  </quote>

+  Note: in drivers, this must be included after &s.code;"xf86_ansic.h"&e.code;.

+

+  Drivers that need to access PCI vendor/device definitions need this:

+  <quote>

+    &s.code;"xf86PciInfo.h"&e.code;

+  </quote>

+

+  Drivers that need to access the PCI config space need this:

+  <quote>

+    &s.code;"xf86Pci.h"&e.code;

+  </quote>

+

+  Drivers that initialise a SW cursor need this:

+  <quote>

+    &s.code;"mipointer.h"&e.code;

+  </quote>

+

+  All drivers implementing backing store need this:

+  <quote>

+    &s.code;"mibstore.h"&e.code;

+  </quote>

+

+  All drivers using the mi colourmap code need this:

+  <quote>

+    &s.code;"micmap.h"&e.code;

+  </quote>

+

+  If a driver uses the vgahw module, it needs this:

+  <quote>

+    &s.code;"vgaHW.h"&e.code;

+  </quote>

+

+  Drivers supporting VGA or Hercules monochrome screens need:

+  <quote>

+    &s.code;"xf1bpp.h"&e.code;

+  </quote>

+

+  Drivers supporting VGA or EGC 16-colour screens need:

+  <quote>

+    &s.code;"xf4bpp.h"&e.code;

+  </quote>

+

+  Drivers using cfb need:

+  <quote>

+    &s.code;#define PSZ 8&nl;

+    #include "cfb.h"&nl;

+    #undef PSZ&e.code;

+  </quote>

+

+  Drivers supporting bpp 16, 24 or 32 with cfb need one or more of:

+  <quote>

+    &s.code;"cfb16.h"&nl;

+    "cfb24.h"&nl;

+    "cfb32.h"&e.code;

+  </quote>

+

+  If a driver uses XAA, it needs these:

+  <quote>

+    &s.code;"xaa.h"&nl;

+    "xaalocal.h"&e.code;

+  </quote>

+

+  If a driver uses the fb manager, it needs this:

+  <quote>

+    &s.code;"xf86fbman.h"&e.code;

+  </quote>

+  </quote>

+

+Non-driver modules should include &s.code;"xf86_ansic.h"&e.code; to get the correct

+wrapping of ANSI C/libc functions.

+

+All modules must NOT include any system include files, or the following:

+

+ <quote>

+    &s.code;"xf86Priv.h"&nl;

+    "xf86Privstr.h"&nl;

+    "xf86_OSlib.h"&nl;

+    "Xos.h"&e.code;

+ </quote>

+

+In addition, "xf86_libc.h" must not be included explicitly.  It is

+included implicitly by "xf86_ansic.h".

+

+

+<sect>Offscreen Memory Manager

+<p>

+

+Management of offscreen video memory may be handled by the XFree86

+framebuffer manager.  Once the offscreen memory manager is running,

+drivers or extensions may allocate, free or resize areas of offscreen

+video memory using the following functions (definitions taken from

+&s.code;xf86fbman.h&e.code;):

+

+<code>

+    typedef struct _FBArea {

+        ScreenPtr    pScreen;

+        BoxRec       box;

+        int          granularity;

+        void         (*MoveAreaCallback)(struct _FBArea*, struct _FBArea*)

+        void         (*RemoveAreaCallback)(struct _FBArea*)

+        DevUnion     devPrivate;

+    } FBArea, *FBAreaPtr;

+

+    typedef void (*MoveAreaCallbackProcPtr)(FBAreaPtr from, FBAreaPtr to)

+    typedef void (*RemoveAreaCallbackProcPtr)(FBAreaPtr)

+

+    FBAreaPtr xf86AllocateOffscreenArea (

+        ScreenPtr pScreen,

+        int width, int height,

+        int granularity,

+        MoveAreaCallbackProcPtr MoveAreaCallback,

+        RemoveAreaCallbackProcPtr RemoveAreaCallback,

+        pointer privData

+    )

+

+    void xf86FreeOffscreenArea (FBAreaPtr area)

+

+    Bool xf86ResizeOffscreenArea (

+	FBAreaPtr area

+	int w, int h

+    )

+</code>

+

+The function:

+<quote>

+    &s.code;Bool xf86FBManagerRunning(ScreenPtr pScreen)&e.code;

+</quote>

+

+can be used by an extension to check if the driver has initialized

+the memory manager.  The manager is not available if this returns

+&s.code;FALSE&e.code; and the functions above will all fail.

+

+

+&s.code;xf86AllocateOffscreenArea()&e.code; can be used to request a

+rectangle of dimensions &s.code;width&e.code; x &s.code;height&e.code;

+(in pixels) from unused offscreen memory.  &s.code;granularity&e.code;

+specifies that the leftmost edge of the rectangle must lie on some

+multiple of &s.code;granularity&e.code; pixels.  A granularity of zero

+means the same thing as a granularity of one - no alignment preference.

+A &s.code;MoveAreaCallback&e.code; can be provided to notify the requester

+when the offscreen area is moved.  If no &s.code;MoveAreaCallback&e.code;

+is supplied then the area is considered to be immovable.  The

+&s.code;privData&e.code; field will be stored in the manager's internal

+structure for that allocated area and will be returned to the requester

+in the &s.code;FBArea&e.code; passed via the

+&s.code;MoveAreaCallback&e.code;.  An optional

+&s.code;RemoveAreaCallback&e.code; is provided.  If the driver provides

+this it indicates that the area should be allocated with a lower priority.

+Such an area may be removed when a higher priority request (one that

+doesn't have a &s.code;RemoveAreaCallback&e.code;) is made.  When this

+function is called, the driver will have an opportunity to do whatever

+cleanup it needs to do to deal with the loss of the area, but it must

+finish its cleanup before the function exits since the offscreen memory

+manager will free the area immediately after.

+

+&s.code;xf86AllocateOffscreenArea()&e.code; returns &s.code;NULL&e.code;

+if it was unable to allocate the requested area.  When no longer needed,

+areas should be freed with &s.code;xf86FreeOffscreenArea()&e.code;.

+

+&s.code;xf86ResizeOffscreenArea()&e.code; resizes an existing

+&s.code;FBArea&e.code;.  &s.code;xf86ResizeOffscreenArea()&e.code;

+returns &s.code;TRUE&e.code; if the resize was successful.  If

+&s.code;xf86ResizeOffscreenArea()&e.code; returns &s.code;FALSE&e.code;,

+the original &s.code;FBArea&e.code; is left unmodified.  Resizing an

+area maintains the area's original &s.code;granularity&e.code;,

+&s.code;devPrivate&e.code;, and &s.code;MoveAreaCallback&e.code;.

+&s.code;xf86ResizeOffscreenArea()&e.code; has considerably less overhead

+than freeing the old area then reallocating the new size, so it should

+be used whenever possible.

+

+The function:

+  <quote>

+   &s.code;Bool xf86QueryLargestOffscreenArea(

+     &f.indent;ScreenPtr pScreen,

+     &f.indent;int *width, int *height,

+     &f.indent;int granularity,

+     &f.indent;int preferences,

+     &f.indent;int priority

+   &nl)&e.code;

+  </quote>

+

+is provided to query the width and height of the largest single

+&s.code;FBArea&e.code; allocatable given a particular priority.

+&s.code;preferences&e.code; can be one of the following to indicate

+whether width, height or area should be considered when determining

+which is the largest single &s.code;FBArea&e.code; available.

+

+  <quote>

+  &s.code;FAVOR_AREA_THEN_WIDTH&nl;

+  FAVOR_AREA_THEN_HEIGHT&nl;

+  FAVOR_WIDTH_THEN_AREA&nl;

+  FAVOR_HEIGHT_THEN_AREA&e.code;

+  </quote>

+

+&s.code;priority&e.code; is one of the following:

+

+  <quote><p>

+  &s.code;PRIORITY_LOW&e.code;

+  <quote><p>

+     Return the largest block available without stealing anyone else's

+     space.  This corresponds to the priority of allocating a

+     &s.code;FBArea&e.code; when a &s.code;RemoveAreaCallback&e.code;

+     is provided.

+

+  </quote>

+  &s.code;PRIORITY_NORMAL&e.code;

+  <quote><p>

+     Return the largest block available if it is acceptable to steal a

+     lower priority area from someone.  This corresponds to the priority

+     of allocating a &s.code;FBArea&e.code; without providing a

+     &s.code;RemoveAreaCallback&e.code;.

+

+  </quote>

+  &s.code;PRIORITY_EXTREME&e.code;

+  <quote><p>

+     Return the largest block available if all &s.code;FBAreas&e.code;

+     that aren't locked down were expunged from memory first.  This

+     corresponds to any allocation made directly after a call to

+     &s.code;xf86PurgeUnlockedOffscreenAreas()&e.code;.

+

+  </quote>

+  </quote>

+

+

+The function:

+

+  <quote>

+    &s.code;Bool xf86PurgeUnlockedOffscreenAreas(ScreenPtr pScreen)&e.code;

+  </quote>

+

+is provided as an extreme method to free up offscreen memory.  This

+will remove all removable &s.code;FBArea&e.code; allocations.

+

+

+Initialization of the XFree86 framebuffer manager is done via

+

+  <quote>

+    &s.code;Bool xf86InitFBManager(ScreenPtr pScreen, BoxPtr FullBox)&e.code;

+  </quote>

+

+&s.code;FullBox&e.code; represents the area of the framebuffer that the

+manager is allowed to manage.  This is typically a box with a width of

+&s.code;pScrn-&gt;displayWidth&e.code; and a height of as many lines as

+can be fit within the total video memory, however, the driver can reserve

+areas at the extremities by passing a smaller area to the manager.

+

+&s.code;xf86InitFBManager()&e.code; must be called before XAA is

+initialized since XAA uses the manager for it's pixmap cache.

+

+An alternative function is provided to allow the driver to initialize

+the framebuffer manager with a Region rather than a box.

+

+  <quote>

+   &s.code;Bool xf86InitFBManagerRegion(ScreenPtr pScreen,

+	&f.indent;RegionPtr FullRegion)&e.code;

+  </quote>

+

+&s.code;xf86InitFBManagerRegion()&e.code;, unlike

+&s.code;xf86InitFBManager()&e.code;, does not remove the area used for

+the visible screen so that area should not be included in the region

+passed to the function.  &s.code;xf86InitFBManagerRegion()&e.code; is

+useful when non-contiguous areas are available to be managed, and is

+required when multiple framebuffers are stored in video memory (as in

+the case where an overlay of a different depth is stored as a second

+framebuffer in offscreen memory).

+

+

+<sect>Colormap Handling<label id="cmap">

+<p>

+

+A generic colormap handling layer is provided within the XFree86 common

+layer.  This layer takes care of most of the details, and only requires

+a function from the driver that loads the hardware palette when required.

+To use the colormap layer, a driver calls the

+&s.code;xf86HandleColormaps()&e.code; function.

+

+    <quote><p>

+    &s.code;Bool xf86HandleColormaps(ScreenPtr pScreen, int maxColors,

+		&f.indent;int sigRGBbits, LoadPaletteFuncPtr loadPalette,

+		&f.indent;SetOverscanFuncPtr setOverscan,

+		unsigned int flags)&e.code;

+    <quote><p>

+      This function must be called after the default colormap has been

+      initialised.  The &s.code;pScrn-&gt;gamma&e.code; field must also

+      be initialised, preferably by calling &s.code;xf86SetGamma()&e.code;.

+      &s.code;maxColors&e.code; is the number of entries in the palette.

+      &s.code;sigRGBbits&e.code; is the size in bits of each color

+      component in the DAC's palette.  &s.code;loadPalette&e.code;

+      is a driver-provided function for loading a colormap into the

+      hardware, and is described below.  &s.code;setOverscan&e.code; is

+      an optional function that may be provided when the overscan color

+      is an index from the standard LUT and when it needs to be adjusted

+      to keep it as close to black as possible.  The

+      &s.code;setOverscan&e.code; function programs the overscan index.

+      It shouldn't normally be used for depths other than 8.

+      &s.code;setOverscan&e.code; should be set to &s.code;NULL&e.code;

+      when it isn't needed.  &s.code;flags&e.code; may be set to the

+      following (which may be ORed together):

+

+      &s.code;CMAP_PALETTED_TRUECOLOR&e.code;

+      <quote><p>

+				    the TrueColor visual is paletted and is

+				    just a special case of DirectColor.

+				    This flag is only valid for

+				    &s.code;bpp&nbsp;&gt;&nbsp;8&e.code;.

+

+      </quote>

+

+      &s.code;CMAP_RELOAD_ON_MODE_SWITCH&e.code;

+      <quote><p>

+				    reload the colormap automatically

+                                    after mode switches.  This is useful

+                                    for when the driver is resetting the

+                                    hardware during mode switches and

+                                    corrupting or erasing the hardware

+                                    palette.

+

+      </quote>

+

+      &s.code;CMAP_LOAD_EVEN_IF_OFFSCREEN&e.code;

+      <quote><p>

+				    reload the colormap even if the screen

+				    is switched out of the server's VC.

+				    The palette is <it>not</it> reloaded when

+				    the screen is switched back in, nor after

+				    mode switches.  This is useful when the

+				    driver needs to keep track of palette

+				    changes.

+

+      </quote>

+

+      The colormap layer normally reloads the palette after VT enters so it

+      is not necessary for the driver to save and restore the palette

+      when switching VTs.  The driver must, however, still save the

+      initial palette during server start up and restore it during

+      server exit.

+

+    </quote>

+

+    &s.code;void LoadPalette(ScrnInfoPtr pScrn, int numColors, int *indices,

+		&f.indent;LOCO *colors, VisualPtr pVisual)&e.code;

+    <quote><p>

+      &s.code;LoadPalette()&e.code; is a driver-provided function for

+      loading a colormap into hardware.  &s.code;colors&e.code; is the

+      array of RGB values that represent the full colormap.

+      &s.code;indices&e.code; is a list of index values into the colors

+      array.  These indices indicate the entries that need to be updated.

+      &s.code;numColors&e.code; is the number of the indices to be

+      updated.

+

+    </quote>

+

+    &s.code;void SetOverscan(ScrnInfoPtr pScrn, int overscan)&e.code;

+    <quote><p>

+      &s.code;SetOverscan()&e.code; is a driver-provided function for

+      programming the &s.code;overscan&e.code; index.  As described

+      above, it is normally only appropriate for LUT modes where all

+      colormap entries are available for the display, but where one of

+      them is also used for the overscan (typically 8bpp for VGA compatible

+      LUTs).  It isn't required in cases where the overscan area is

+      never visible.

+

+    </quote>

+    </quote>

+

+

+<sect>DPMS Extension

+<p>

+

+Support code for the DPMS extension is included in the XFree86 common layer.

+This code provides an interface between the main extension code, and a means

+for drivers to initialise DPMS when they support it.  One function is

+available to drivers to do this initialisation, and it is always available,

+even when the DPMS extension is not supported by the core server (in

+which case it returns a failure result).

+

+

+    <quote><p>

+    &s.code;Bool xf86DPMSInit(ScreenPtr pScreen, DPMSSetProcPtr set, int flags)&e.code;

+    <quote><p>

+      This function registers a driver's DPMS level programming function

+      &s.code;set&e.code;.  It also checks

+      &s.code;pScrn-&gt;options&e.code; for the "dpms" option, and when

+      present marks DPMS as being enabled for that screen.  The

+      &s.code;set&e.code; function is called whenever the DPMS level

+      changes, and is used to program the requested level.

+      &s.code;flags&e.code; is currently not used, and should be

+      &s.code;0&e.code;.  If the initialisation fails for any reason,

+      including when there is no DPMS support in the core server, the

+      function returns &s.code;FALSE&e.code;.

+

+    </quote>

+    </quote>

+

+

+Drivers that implement DPMS support must provide the following function,

+that gets called when the DPMS level is changed:

+

+

+    <quote><p>

+    &s.code;void ChipDPMSSet(ScrnInfoPtr pScrn, int level, int flags)&e.code;

+    <quote><p>

+      Program the DPMS level specified by &s.code;level&e.code;.  Valid

+      values of &s.code;level&e.code; are &s.code;DPMSModeOn&e.code;,

+      &s.code;DPMSModeStandby&e.code;, &s.code;DPMSModeSuspend&e.code;,

+      &s.code;DPMSModeOff&e.code;.  These values are defined in

+      &s.code;"extensions/dpms.h"&e.code;.

+

+    </quote>

+    </quote>

+

+

+<sect>DGA Extension

+<p>

+

+Drivers can support the XFree86 Direct Graphics Architecture (DGA) by

+filling out a structure of function pointers and a list of modes and

+passing them to DGAInit.

+

+    <quote><p>

+    &s.code;Bool DGAInit(ScreenPtr pScreen, DGAFunctionPtr funcs,

+			&f.indent;DGAModePtr modes, int num)&e.code;

+    <quote><p>

+    <verb>

+/** The DGAModeRec **/

+

+typedef struct {

+  int num;

+  DisplayModePtr mode;

+  int flags;

+  int imageWidth;

+  int imageHeight;

+  int pixmapWidth;

+  int pixmapHeight;

+  int bytesPerScanline;

+  int byteOrder;

+  int depth;

+  int bitsPerPixel;

+  unsigned long red_mask;

+  unsigned long green_mask;

+  unsigned long blue_mask;

+  int viewportWidth;

+  int viewportHeight;

+  int xViewportStep;

+  int yViewportStep;

+  int maxViewportX;

+  int maxViewportY;

+  int viewportFlags;

+  int offset;

+  unsigned char *address;

+  int reserved1;

+  int reserved2;

+} DGAModeRec, *DGAModePtr;

+</verb>

+

+      &s.code;num&e.code;

+	<quote>

+	 Can be ignored.  The DGA DDX will assign these numbers.

+	</quote>

+

+      &s.code;mode&e.code;

+	<quote>

+	A pointer to the &s.code;DisplayModeRec&e.code; for this mode.

+	</quote>

+

+      &s.code;flags&e.code;

+	<quote><p>

+	The following flags are defined and may be OR'd together:

+

+        &s.code;DGA_CONCURRENT_ACCESS&e.code;

+	    <quote><p>

+            Indicates that the driver supports concurrent graphics

+            accelerator and linear framebuffer access.

+

+	    </quote>

+

+        &s.code;DGA_FILL_RECT&nl;

+	DGA_BLIT_RECT&nl;

+        DGA_BLIT_RECT_TRANS&e.code;

+	    <quote><p>

+	    Indicates that the driver supports the FillRect, BlitRect

+            or BlitTransRect functions in this mode.

+

+	    </quote>

+

+        &s.code;DGA_PIXMAP_AVAILABLE&e.code;

+	    <quote><p>

+	    Indicates that Xlib may be used on the framebuffer.

+            This flag will usually be set unless the driver wishes

+            to prohibit this for some reason.

+

+	    </quote>

+

+        &s.code;DGA_INTERLACED&nl;

+        DGA_DOUBLESCAN&e.code;

+	    <quote><p>

+            Indicates that these are interlaced or double scan modes.

+

+	    </quote>

+	</quote>

+

+      &s.code;imageWidth&nl;

+      imageHeight&e.code;

+	<quote><p>

+		    These are the dimensions of the linear framebuffer

+                     accessible by the client.

+

+	</quote>

+

+      &s.code;pixmapWidth&nl;

+      pixmapHeight&e.code;

+	<quote><p>

+		     These are the dimensions of the area of the

+                     framebuffer accessible by the graphics accelerator.

+

+	</quote>

+

+      &s.code;bytesPerScanline&e.code;

+	<quote><p>

+		      Pitch of the framebuffer in bytes.

+

+	</quote>

+

+      &s.code;byteOrder&e.code;

+	<quote><p>

+		     Usually the same as

+		     &s.code;pScrn-&gt;imageByteOrder&e.code;.

+

+	</quote>

+

+      &s.code;depth&e.code;

+	<quote><p>

+		     The depth of the framebuffer in this mode.

+

+	</quote>

+

+      &s.code;bitsPerPixel&e.code;

+	<quote><p>

+		      The number of bits per pixel in this mode.

+

+	</quote>

+

+      &s.code;red_mask&nl;

+      green_mask&nl;

+      blue_mask&e.code;

+	<quote><p>

+		      The RGB masks for this mode, if applicable.

+

+	</quote>

+

+      &s.code;viewportWidth&nl;

+      viewportHeight&e.code;

+	<quote><p>

+		      Dimensions of the visible part of the framebuffer.

+		      Usually &s.code;mode-&gt;HDisplay&e.code; and

+		      &s.code;mode-&gt;VDisplay&e.code;.

+

+	</quote>

+

+      &s.code;xViewportStep&nl;

+      yViewportStep&e.code;

+	<quote><p>

+		     The granularity of x and y viewport positions that

+                     the driver supports in this mode.

+

+	</quote>

+

+      &s.code;maxViewportX&nl;

+      maxViewportY&e.code;

+	<quote><p>

+		      The maximum viewport position supported by the

+                       driver in this mode.

+

+	</quote>

+

+      &s.code;viewportFlags&e.code;

+	<quote><p>

+		     The following may be OR'd together:

+

+       &s.code;DGA_FLIP_IMMEDIATE&e.code;

+	    <quote><p>

+		The driver supports immediate viewport changes.

+

+	    </quote>

+       &s.code;DGA_FLIP_RETRACE&e.code;

+	    <quote<p>

+		The driver supports viewport changes at retrace.

+

+	    </quote>

+	</quote>

+

+      &s.code;offset&e.code;

+	<quote><p>

+	        The offset into the linear framebuffer that corresponds to

+                pixel (0,0) for this mode.

+

+	</quote>

+

+      &s.code;address&e.code;

+        <quote><p>

+                The virtual address of the framebuffer as mapped by the driver.

+                This is needed when DGA_PIXMAP_AVAILABLE is set.

+

+        </quote>

+

+      <verb>

+/** The DGAFunctionRec **/

+

+typedef struct {

+  Bool (*OpenFramebuffer)(

+       ScrnInfoPtr pScrn,

+       char **name,

+       unsigned char **mem,

+       int *size,

+       int *offset,

+       int *extra

+  );

+  void (*CloseFramebuffer)(ScrnInfoPtr pScrn);

+  Bool (*SetMode)(ScrnInfoPtr pScrn, DGAModePtr pMode);

+  void (*SetViewport)(ScrnInfoPtr pScrn, int x, int y, int flags);

+  int  (*GetViewport)(ScrnInfoPtr pScrn);

+  void (*Sync)(ScrnInfoPtr);

+  void (*FillRect)(

+       ScrnInfoPtr pScrn,

+       int x, int y, int w, int h,

+       unsigned long color

+  );

+  void (*BlitRect)(

+       ScrnInfoPtr pScrn,

+       int srcx, int srcy,

+       int w, int h,

+       int dstx, int dsty

+  );

+  void (*BlitTransRect)(

+       ScrnInfoPtr pScrn,

+       int srcx, int srcy,

+       int w, int h,

+       int dstx, int dsty,

+       unsigned long color

+  );

+} DGAFunctionRec, *DGAFunctionPtr;

+</verb>

+

+    </quote>

+

+    &s.code;Bool OpenFramebuffer (pScrn, name, mem, size, offset, extra)&e.code;

+    <quote><p>

+      &s.code;OpenFramebuffer()&e.code; should pass the client everything

+      it needs to know to be able to open the framebuffer.  These

+      parameters are OS specific and their meanings are to be interpreted

+      by an OS specific client library.

+

+      &s.code;name&e.code;

+	<quote><p>

+	      The name of the device to open or &s.code;NULL&e.code; if

+	      there is no special device to open.  A &s.code;NULL&e.code;

+	      name tells the client that it should open whatever device

+	      one would usually open to access physical memory.

+

+	</quote>

+      &s.code;mem&e.code;

+	<quote><p>

+	       The physical address of the start of the framebuffer.

+

+	</quote>

+      &s.code;size&e.code;

+	<quote><p>

+	      The size of the framebuffer in bytes.

+

+	</quote>

+      &s.code;offset&e.code;

+	<quote><p>

+	      Any offset into the device, if applicable.

+

+	</quote>

+      &s.code;flags&e.code;

+	<quote><p>

+	      Any additional information that the client may need.

+	      Currently, only the &s.code;DGA_NEED_ROOT&e.code; flag is

+	      defined.

+

+	</quote>

+   </quote>

+

+    &s.code;void CloseFramebuffer (pScrn)&e.code;

+    <quote><p>

+      &s.code;CloseFramebuffer()&e.code; merely informs the driver (if it

+      even cares) that client no longer needs to access the framebuffer

+      directly.  This function is optional.

+

+    </quote>

+

+    &s.code;Bool SetMode (pScrn, pMode)&e.code;

+    <quote><p>

+      &s.code;SetMode()&e.code; tells the driver to initialize the mode

+      passed to it.  If &s.code;pMode&e.code; is &s.code;NULL&e.code;,

+      then the driver should restore the original pre-DGA mode.

+

+    </quote>

+

+    &s.code;void SetViewport (pScrn, x, y, flags)&e.code;

+    <quote><p>

+      &s.code;SetViewport()&e.code; tells the driver to make the upper

+      left-hand corner of the visible screen correspond to coordinate

+      &s.code;(x,y)&e.code; on the framebuffer.  &s.code;Flags&e.code;

+      currently defined are:

+

+       &s.code;DGA_FLIP_IMMEDIATE&e.code;

+	<quote><p>

+	    The viewport change should occur immediately.

+

+	</quote>

+       &s.code;DGA_FLIP_RETRACE&e.code;

+	<quote><p>

+	    The viewport change should occur at the

+            vertical retrace, but this function should

+            return sooner if possible.

+

+	</quote>

+      The &s.code;(x,y)&e.code; locations will be passed as the client

+      specified them, however, the driver is expected to round these

+      locations down to the next supported location as specified by the

+      &s.code;xViewportStep&e.code; and &s.code;yViewportStep&e.code;

+      for the current mode.

+

+    </quote>

+

+    &s.code;int GetViewport (pScrn)&e.code;

+    <quote><p>

+      &s.code;GetViewport()&e.code; gets the current page flip status.

+      Set bits in the returned int correspond to viewport change requests

+      still pending.  For instance, set bit zero if the last SetViewport

+      request is still pending, bit one if the one before that is still

+      pending, etc.

+

+    </quote>

+

+    &s.code;void Sync (pScrn)&e.code;

+    <quote><p>

+      This function should ensure that any graphics accelerator operations

+      have finished.  This function should not return until the graphics

+      accelerator is idle.

+

+    </quote>

+

+    &s.code;void FillRect (pScrn, x, y, w, h, color)&e.code;

+    <quote><p>

+      This optional function should fill a rectangle

+      &s.code;w&nbsp;&times;&nbsp;h&e.code; located at

+      &s.code;(x,y)&e.code; in the given color.

+

+    </quote>

+

+    &s.code;void BlitRect (pScrn, srcx, srcy, w, h, dstx, dsty)&e.code;

+    <quote><p>

+      This optional function should copy an area

+      &s.code;w&nbsp;&times;&nbsp;h&e.code; located at

+      &s.code;(srcx,srcy)&e.code; to location &s.code;(dstx,dsty)&e.code;.

+      This function will need to handle copy directions as appropriate.

+

+    </quote>

+

+    &s.code;void BlitTransRect (pScrn, srcx, srcy, w, h, dstx, dsty, color)&e.code;

+    <quote><p>

+      This optional function is the same as BlitRect except that pixels

+      in the source corresponding to the color key &s.code;color&e.code;

+      should be skipped.

+

+    </quote>

+    </quote>

+

+<sect>The XFree86 X Video Extension (Xv) Device Dependent Layer

+<p>

+

+XFree86 offers the X Video Extension which allows clients to treat video

+as any another primitive and ``Put'' video into drawables.  By default,

+the extension reports no video adaptors as being available since the

+DDX layer has not been initialized.  The driver can initialize the DDX

+layer by filling out one or more &s.code;XF86VideoAdaptorRecs&e.code;

+as described later in this document and passing a list of

+&s.code;XF86VideoAdaptorPtr&e.code; pointers to the following function:

+

+  <quote>

+  &s.code;Bool xf86XVScreenInit(

+	&f.indent;ScreenPtr pScreen,

+	&f.indent;XF86VideoAdaptorPtr *adaptPtrs,

+	&f.indent;int num)&e.code;

+  </quote>

+

+After doing this, the extension will report video adaptors as being

+available, providing the data in their respective

+&s.code;XF86VideoAdaptorRecs&e.code; was valid.

+&s.code;xf86XVScreenInit()&e.code; <em>copies</em> data from the structure

+passed to it so the driver may free it after the initialization.  At

+the moment, the DDX only supports rendering into Window drawables.

+Pixmap rendering will be supported after a sufficient survey of suitable

+hardware is completed.

+

+The &s.code;XF86VideoAdaptorRec&e.code;:

+

+<quote><p>

+<verb>

+typedef struct {

+	unsigned int type;

+	int flags;

+	char *name;

+	int nEncodings;

+	XF86VideoEncodingPtr pEncodings;

+	int nFormats;

+	XF86VideoFormatPtr pFormats;

+	int nPorts;

+	DevUnion *pPortPrivates;

+	int nAttributes;

+	XF86AttributePtr pAttributes;

+	int nImages;

+	XF86ImagePtr pImages;

+	PutVideoFuncPtr PutVideo;

+	PutStillFuncPtr PutStill;

+	GetVideoFuncPtr GetVideo;

+	GetStillFuncPtr GetStill;

+	StopVideoFuncPtr StopVideo;

+	SetPortAttributeFuncPtr SetPortAttribute;

+	GetPortAttributeFuncPtr GetPortAttribute;

+	QueryBestSizeFuncPtr QueryBestSize;

+	PutImageFuncPtr PutImage;

+	QueryImageAttributesFuncPtr QueryImageAttributes;

+} XF86VideoAdaptorRec, *XF86VideoAdaptorPtr;

+</verb>

+

+   Each adaptor will have its own XF86VideoAdaptorRec.  The fields are

+   as follows:

+

+     &s.code;type&e.code;

+     <quote><p>

+	This can be any of the following flags OR'd together.

+

+	&s.code;XvInputMask&e.code;

+	&s.code;XvOutputMask&e.code;

+	<quote><p>

+	    These refer to the target drawable and are similar to a Window's

+	    class. &s.code;XvInputMask&e.code; indicates that the adaptor

+	    can put video into a drawable.  &s.code;XvOutputMask&e.code;

+	    indicates that the adaptor can get video from a drawable.

+	</quote>

+

+	&s.code;XvVideoMask&e.code;

+	&s.code;XvStillMask&e.code;

+	&s.code;XvImageMask&e.code;

+	<quote><p>

+	    These indicate that the adaptor supports video, still or

+	    image primitives respectively.

+	</quote>

+

+	&s.code;XvWindowMask&e.code;

+	&s.code;XvPixmapMask&e.code;

+	<quote><p>

+	    These indicate the types of drawables the adaptor is capable

+	    of rendering into.  At the moment, Pixmap rendering is not

+	    supported and the &s.code;XvPixmapMask&e.code; flag is ignored.

+	</quote>

+

+     </quote>

+

+     &s.code;flags&e.code;

+     <quote><p>

+	Currently, the following flags are defined:

+

+	&s.code;VIDEO_NO_CLIPPING&e.code;

+	<quote><p>

+	   This indicates that the video adaptor does not support

+	   clipping.  The driver will never receive ``Put'' requests

+	   where less than the entire area determined by

+	   &s.code;drw_x&e.code;, &s.code;drw_y&e.code;,

+	   &s.code;drw_w&e.code; and &s.code;drw_h&e.code; is visible.

+	   This flag does not apply to ``Get'' requests.  Hardware

+	   that is incapable of clipping ``Gets'' may punt or get

+	   the extents of the clipping region passed to it.

+

+	</quote>

+

+	&s.code;VIDEO_INVERT_CLIPLIST&e.code;

+	<quote><p>

+	   This indicates that the video driver requires the clip

+	   list to contain the regions which are obscured rather

+	   than the regions which are are visible.

+

+	</quote>

+

+	&s.code;VIDEO_OVERLAID_STILLS&e.code;

+	<quote><p>

+	   Implementing PutStill for hardware that does video as an

+	   overlay can be awkward since it's unclear how long to leave

+	   the video up for.  When this flag is set, StopVideo will be

+	   called whenever the destination gets clipped or moved so that

+	   the still can be left up until then.

+

+	</quote>

+

+	&s.code;VIDEO_OVERLAID_IMAGES&e.code;

+	<quote><p>

+	    Same as &s.code;VIDEO_OVERLAID_STILLS&e.code; but for images.

+	</quote>

+

+	&s.code;VIDEO_CLIP_TO_VIEWPORT&e.code;

+	<quote><p>

+	    Indicates that the clip region passed to the driver functions

+	    should be clipped to the visible portion of the screen in the

+	    case where the viewport is smaller than the virtual desktop.

+	</quote>

+

+     </quote>

+

+     &s.code;name&e.code;

+     <quote><p>

+	The name of the adaptor.

+

+     </quote>

+

+     &s.code;nEncodings&nl;

+     pEncodings&e.code;

+     <quote><p>

+	The number of encodings the adaptor is capable of and pointer

+	to the &s.code;XF86VideoEncodingRec&e.code; array.  The

+	&s.code;XF86VideoEncodingRec&e.code; is described later on.

+	For drivers that only support XvImages there should be an encoding

+	named "XV_IMAGE" and the width and height should specify

+	the maximum size source image supported.

+

+     </quote>

+

+     &s.code;nFormats&nl;

+     pFormats&e.code;

+     <quote><p>

+	The number of formats the adaptor is capable of and pointer to

+	the &s.code;XF86VideoFormatRec&e.code; array.  The

+	&s.code;XF86VideoFormatRec&e.code; is described later on.

+

+     </quote>

+

+     &s.code;nPorts&nl;

+     pPortPrivates&e.code;

+     <quote><p>

+	The number of ports is the number of separate data streams which

+	the adaptor can handle simultaneously.  If you have more than

+	one port, the adaptor is expected to be able to render into more

+	than one window at a time.  &s.code;pPortPrivates&e.code; is

+	an array of pointers or ints - one for each port.  A port's

+	private data will be passed to the driver any time the port is

+	requested to do something like put the video or stop the video.

+	In the case where there may be many ports, this enables the

+	driver to know which port the request is intended for.  Most

+	commonly, this will contain a pointer to the data structure

+	containing information about the port.  In Xv, all ports on

+	a particular adaptor are expected to be identical in their

+	functionality.

+

+     </quote>

+

+     &s.code;nAttributes&nl;

+     pAttributes&e.code;

+     <quote><p>

+	The number of attributes recognized by the adaptor and a pointer to

+	the array of &s.code;XF86AttributeRecs&e.code;.  The

+	&s.code;XF86AttributeRec&e.code; is described later on.

+

+     </quote>

+

+     &s.code;nImages&nl;

+     pImages&e.code;

+     <quote><p>

+	The number of &s.code;XF86ImageRecs&e.code; supported by the adaptor

+	and a pointer to the array of &s.code;XF86ImageRecs&e.code;. The

+	&s.code;XF86ImageRec&e.code; is described later on.

+

+     </quote>

+

+

+     &s.code;PutVideo PutStill GetVideo GetStill StopVideo

+     SetPortAttribute GetPortAttribute QueryBestSize PutImage

+     QueryImageAttributes&e.code;

+     <quote><p>

+	These functions define the DDX-&gt;driver interface.  In each

+	case, the pointer &s.code;data&e.code; is passed to the driver.

+	This is the port private for that port as described above.  All

+	fields are required except under the following conditions:

+

+	<enum>

+	 <item>&s.code;PutVideo&e.code;, &s.code;PutStill&e.code; and

+	     the image routines &s.code;PutImage&e.code; and

+	     &s.code;QueryImageAttributes&e.code; are not required when the

+	     adaptor type does not contain &s.code;XvInputMask&e.code;.

+

+	 <item>&s.code;GetVideo&e.code; and &s.code;GetStill&e.code;

+	     are not required when the adaptor type does not contain

+	     &s.code;XvOutputMask&e.code;.

+

+	 <item>&s.code;GetVideo&e.code; and &s.code;PutVideo&e.code;

+	     are not required when the adaptor type does not contain

+	     &s.code;XvVideoMask&e.code;.

+

+	 <item>&s.code;GetStill&e.code; and &s.code;PutStill&e.code;

+	     are not required when the adaptor type does not contain

+	     &s.code;XvStillMask&e.code;.

+

+	 <item>&s.code;PutImage&e.code; and &s.code;QueryImageAttributes&e.code;

+	     are not required when the adaptor type does not contain

+	     &s.code;XvImageMask&e.code;.

+

+	</enum>

+

+	With the exception of &s.code;QueryImageAttributes&e.code;, these

+	functions should return &s.code;Success&e.code; if the operation was

+	completed successfully.  They can return &s.code;XvBadAlloc&e.code;

+	otherwise. &s.code;QueryImageAttributes&e.code; returns the size

+	of the XvImage queried.

+

+	If the &s.code;VIDEO_NO_CLIPPING&e.code;

+	flag is set, the &s.code;clipBoxes&e.code; may be ignored by

+	the driver.  &s.code;ClipBoxes&e.code; is an &s.code;X-Y&e.code;

+	banded region identical to those used throughout the server.

+	The clipBoxes represent the visible portions of the area determined

+	by &s.code;drw_x&e.code;, &s.code;drw_y&e.code;,

+	&s.code;drw_w&e.code; and &s.code;drw_h&e.code; in the Get/Put

+	function.  The boxes are in screen coordinates, are guaranteed

+	not to overlap and an empty region will never be passed.

+	If the driver has specified &s.code;VIDEO_INVERT_CLIPLIST&e.code;,

+	&s.code;clipBoxes&e.code; will indicate the areas of the primitive

+	which are obscured rather than the areas visible.

+

+    </quote>

+

+	&s.code;typedef  int (* PutVideoFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,

+		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,

+		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;

+    <quote><p>

+	  This indicates that the driver should take a subsection

+	  &s.code;vid_w&e.code; by &s.code;vid_h&e.code; at location

+	  &s.code;(vid_x,vid_y)&e.code; from the video stream and direct

+	  it into the rectangle &s.code;drw_w&e.code; by &s.code;drw_h&e.code;

+	  at location &s.code;(drw_x,drw_y)&e.code; on the screen, scaling as

+	  necessary.  Due to the large variations in capabilities of

+	  the various hardware expected to be used with this extension,

+	  it is not expected that all hardware will be able to do this

+	  exactly as described.  In that case the driver should just do

+	  ``the best it can,'' scaling as closely to the target rectangle

+	  as it can without rendering outside of it.  In the worst case,

+	  the driver can opt to just not turn on the video.

+

+    </quote>

+

+	&s.code;typedef  int (* PutStillFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,

+		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,

+		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;

+    <quote><p>

+	  This is same as &s.code;PutVideo&e.code; except that the driver

+	  should place only one frame from the stream on the screen.

+

+    </quote>

+

+	&s.code;typedef int (* GetVideoFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,

+		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,

+		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;

+    <quote><p>

+	  This is same as &s.code;PutVideo&e.code; except that the driver

+	  gets video from the screen and outputs it.  The driver should

+	  do the best it can to get the requested dimensions correct

+	  without reading from an area larger than requested.

+

+    </quote>

+

+	&s.code;typedef int (* GetStillFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;short vid_x, short vid_y, short drw_x, short drw_y,

+		&f.indent;short vid_w, short vid_h, short drw_w, short drw_h,

+		&f.indent;RegionPtr clipBoxes, pointer data )&e.code;

+    <quote><p>

+	  This is the same as &s.code;GetVideo&e.code; except that the

+	  driver should place only one frame from the screen into the

+	  output stream.

+

+    </quote>

+

+	&s.code;typedef void (* StopVideoFuncPtr)(ScrnInfoPtr pScrn,

+			&f.indent;pointer data, Bool cleanup)&e.code;

+    <quote><p>

+	  This indicates the driver should stop displaying the video.

+	  This is used to stop both input and output video.  The

+	  &s.code;cleanup&e.code; field indicates that the video is

+	  being stopped because the client requested it to stop or

+	  because the server is exiting the current VT.  In that case

+	  the driver should deallocate any offscreen memory areas (if

+	  there are any) being used to put the video to the screen.  If

+	  &s.code;cleanup&e.code; is not set, the video is being stopped

+	  temporarily due to clipping or moving of the window, etc...

+	  and video will likely be restarted soon so the driver should

+	  not deallocate any offscreen areas associated with that port.

+

+    </quote>

+	&s.code;typedef int (* SetPortAttributeFuncPtr)(ScrnInfoPtr pScrn,

+		 &f.indent;Atom attribute,INT32 value, pointer data)&e.code;

+

+	&s.code;typedef int (* GetPortAttributeFuncPtr)(ScrnInfoPtr pScrn,

+		&f.indent;Atom attribute,INT32 *value, pointer data)&e.code;

+

+    <quote><p>

+	  A port may have particular attributes such as hue,

+	  saturation, brightness or contrast.  Xv clients set and

+	  get these attribute values by sending attribute strings

+	  (Atoms) to the server.  Such requests end up at these

+	  driver functions.  It is recommended that the driver provide

+	  at least the following attributes mentioned in the Xv client

+	  library docs:

+	  <quote>

+		&s.code;XV_ENCODING&nl;

+		XV_HUE&nl;

+		XV_SATURATION&nl;

+		XV_BRIGHTNESS&nl;

+  		XV_CONTRAST&e.code;

+	  </quote>

+	  but the driver may recognize as many atoms as it wishes.  If

+	  a requested attribute is unknown by the driver it should return

+	  &s.code;BadMatch&e.code;.  &s.code;XV_ENCODING&e.code; is the

+	  attribute intended to let the client specify which video

+	  encoding the particular port should be using (see the description

+	  of &s.code;XF86VideoEncodingRec&e.code; below).  If the

+	  requested encoding is unsupported, the driver should return

+	  &s.code;XvBadEncoding&e.code;.  If the value lies outside the

+	  advertised range &s.code;BadValue&e.code; may be returned.

+	  &s.code;Success&e.code; should be returned otherwise.

+

+    </quote>

+

+	&s.code;typedef void (* QueryBestSizeFuncPtr)(ScrnInfoPtr pScrn,

+		&f.indent;Bool motion, short vid_w, short vid_h,

+		&f.indent;short drw_w, short drw_h,

+		&f.indent;unsigned int *p_w, unsigned int *p_h, pointer data)&e.code;

+    <quote><p>

+	   &s.code;QueryBestSize&e.code; provides the client with a way

+	   to query what the destination dimensions would end up being

+	   if they were to request that an area

+	   &s.code;vid_w&e.code by &s.code;vid_h&e.code; from the video

+	   stream be scaled to rectangle of

+	   &s.code;drw_w&e.code; by &s.code;drw_h&e.code; on the screen.

+	   Since it is not expected that all hardware will be able to

+	   get the target dimensions exactly, it is important that the

+	   driver provide this function.

+

+    </quote>

+

+	&s.code;typedef  int (* PutImageFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;short src_x, short src_y, short drw_x, short drw_y,

+		&f.indent;short src_w, short src_h, short drw_w, short drw_h,

+		&f.indent;int image, char *buf, short width, short height,

+		&f.indent;Bool sync, RegionPtr clipBoxes, pointer data )&e.code;

+    <quote><p>

+	  This is similar to &s.code;PutStill&e.code; except that the

+	  source of the video is not a port but the data stored in a system

+	  memory buffer at &s.code;buf&e.code;.  The data is in the format

+	  indicated by the &s.code;image&e.code; descriptor and represents a

+	  source of size &s.code;width&e.code; by &s.code;height&e.code;.

+	  If &s.code;sync&e.code; is TRUE the driver should not return

+	  from this function until it is through reading the data

+	  from &s.code;buf&e.code;.  Returning when &s.code;sync&e.code;

+	  is TRUE indicates that it is safe for the data at &s.code;buf&e.code;

+	  to be replaced, freed, or modified.

+

+    </quote>

+

+	&s.code;typedef  int (* QueryImageAttributesFuncPtr)( ScrnInfoPtr pScrn,

+		&f.indent;int image, short *width, short *height,

+		&f.indent;int *pitches, int *offsets)&e.code;

+    <quote><p>

+	  This function is called to let the driver specify how data for

+	  a particular &s.code;image&e.code; of size &s.code;width&e.code;

+	  by &s.code;height&e.code; should be stored.  Sometimes only

+	  the size and corrected width and height are needed.  In that

+	  case &s.code;pitches&e.code; and &s.code;offsets&e.code; are

+	  NULL.  The size of the memory required for the image is returned

+	  by this function.  The &s.code;width&e.code; and

+	  &s.code;height&e.code; of the requested image can be altered by

+	  the driver to reflect format limitations (such as component

+	  sampling periods that are larger than one).  If

+	  &s.code;pitches&e.code; and &s.code;offsets&e.code; are not NULL,

+	  these will be arrays with as many elements in them as there

+	  are planes in the &s.code;image&e.code; format.  The driver

+	  should specify the pitch (in bytes) of each scanline in the

+	  particular plane as well as the offset to that plane (in bytes)

+	  from the beginning of the image.

+

+    </quote>

+

+    </quote>

+

+The XF86VideoEncodingRec:

+<quote><p>

+<verb>

+typedef struct {

+	int id;

+	char *name;

+	unsigned short width, height;

+	XvRationalRec rate;

+} XF86VideoEncodingRec, *XF86VideoEncodingPtr;

+

+</verb>

+   The &s.code;XF86VideoEncodingRec&e.code; specifies what encodings

+   the adaptor can support.  Most of this data is just informational

+   and for the client's benefit, and is what will be reported by

+   &s.code;XvQueryEncodings&e.code;.  The &s.code;id&e.code; field is

+   expected to be a unique identifier to allow the client to request a

+   certain encoding via the &s.code;XV_ENCODING&e.code; attribute string.

+

+</quote>

+

+The XF86VideoFormatRec:

+

+<quote><p>

+<verb>

+typedef struct {

+	char  depth;

+	short class;

+} XF86VideoFormatRec, *XF86VideoFormatPtr;

+</verb>

+

+    This specifies what visuals the video is viewable in.

+    &s.code;depth&e.code; is the depth of the visual (not bpp).

+    &s.code;class&e.code; is the visual class such as

+    &s.code;TrueColor&e.code;, &s.code;DirectColor&e.code; or

+    &s.code;PseudoColor&e.code;.  Initialization of an adaptor will fail

+    if none of the visuals on that screen are supported.

+

+</quote>

+

+The XF86AttributeRec:

+

+<quote><p>

+<verb>

+typedef struct {

+	int   flags;

+	int   min_value;

+	int   max_value;

+	char  *name;

+} XF86AttributeListRec, *XF86AttributeListPtr;

+

+</verb>

+

+   Each adaptor may have an array of these advertising the attributes

+   for its ports.  Currently defined flags are &s.code;XvGettable&e.code;

+   and &s.code;XvSettable&e.code; which may be OR'd together indicating that

+   attribute is ``gettable'' or ``settable'' by the client.  The

+   &s.code;min&e.code; and &s.code;max&e.code; field specify the valid range

+   for the value.  &s.code;Name&e.code; is a text string describing the

+   attribute by name.

+

+</quote>

+

+The XF86ImageRec:

+

+<quote><p>

+<verb>

+typedef struct {

+	int id;

+	int type;

+	int byte_order;

+	char guid[16];

+	int bits_per_pixel;

+	int format;

+	int num_planes;

+

+	/* for RGB formats */

+	int depth;

+	unsigned int red_mask;

+	unsigned int green_mask;

+	unsigned int blue_mask;

+

+	/* for YUV formats */

+	unsigned int y_sample_bits;

+	unsigned int u_sample_bits;

+	unsigned int v_sample_bits;

+	unsigned int horz_y_period;

+	unsigned int horz_u_period;

+	unsigned int horz_v_period;

+	unsigned int vert_y_period;

+	unsigned int vert_u_period;

+	unsigned int vert_v_period;

+	char component_order[32];

+	int scanline_order;

+} XF86ImageRec, *XF86ImagePtr;

+</verb>

+

+   XF86ImageRec describes how video source data is laid out in memory.

+   The fields are as follows:

+

+    &s.code;id&e.code;

+    <quote><p>

+	This is a unique descriptor for the format.  It is often good to

+        set this value to the FOURCC for the format when applicable.

+    </quote>

+

+    &s.code;type&e.code;

+    <quote><p>

+	This is &s.code;XvRGB&e.code; or &s.code;XvYUV&e.code;.

+    </quote>

+

+    &s.code;byte_order&e.code;

+    <quote><p>

+	This is &s.code;LSBFirst&e.code; or &s.code;MSBFirst&e.code;.

+    </quote>

+

+    &s.code;guid&e.code;

+    <quote><p>

+	This is the Globally Unique IDentifier for the format.  When

+	not applicable, all characters should be NULL.

+    </quote>

+

+    &s.code;bits_per_pixel&e.code;

+    <quote><p>

+	The number of bits taken up (but not necessarily used) by each

+	pixel.  Note that for some planar formats which have fractional

+	bits per pixel (such as IF09) this number may be rounded _down_.

+    </quote>

+

+    &s.code;format&e.code;

+    <quote><p>

+	This is &s.code;XvPlanar&e.code; or &s.code;XvPacked&e.code;.

+    </quote>

+

+   &s.code;num_planes&e.code;

+    <quote><p>

+	The number of planes in planar formats.  This should be set to

+	one for packed formats.

+    </quote>

+

+   &s.code;depth&e.code;

+    <quote><p>

+	The significant bits per pixel in RGB formats (analgous to the

+	depth of a pixmap format).

+    </quote>

+

+   &s.code;red_mask&e.code;

+   &s.code;green_mask&e.code;

+   &s.code;blue_mask&e.code;

+    <quote><p>

+	The red, green and blue bitmasks for packed RGB formats.

+    </quote>

+

+   &s.code;y_sample_bits&e.code;

+   &s.code;u_sample_bits&e.code;

+   &s.code;v_sample_bits&e.code;

+    <quote><p>

+	The y, u and v sample sizes (in bits).

+    </quote>

+

+   &s.code;horz_y_period&e.code;

+   &s.code;horz_u_period&e.code;

+   &s.code;horz_v_period&e.code;

+    <quote><p>

+	The y, u and v sampling periods in the horizontal direction.

+    </quote>

+

+   &s.code;vert_y_period&e.code;

+   &s.code;vert_u_period&e.code;

+   &s.code;vert_v_period&e.code;

+    <quote><p>

+	The y, u and v sampling periods in the vertical direction.

+    </quote>

+

+   &s.code;component_order&e.code;

+    <quote><p>

+	Uppercase ascii characters representing the order that

+	samples are stored within packed formats.  For planar formats

+	this represents the ordering of the planes.  Unused characters

+	in the 32 byte string should be set to NULL.

+    </quote>

+

+   &s.code;scanline_order&e.code;

+    <quote><p>

+	This is &s.code;XvTopToBottom&e.code; or &s.code;XvBottomToTop&e.code;.

+    </quote>

+

+  Since some formats (particular some planar YUV formats) may not

+be completely defined by the parameters above, the guid, when

+available, should provide the most accurate description of the

+format.

+

+</quote>

+

+<sect>The Loader

+<p>

+

+This section describes the interfaces to the module loader.  The loader

+interfaces can be divided into two groups: those that are only available to

+the XFree86 common layer, and those that are also available to modules.

+

+<sect1>Loader Overview

+<p>

+

+The loader is capable of loading modules in a range of object formats,

+and knowledge of these formats is built in to the loader.  Knowledge of

+new object formats can be added to the loader in a straightforward

+manner.  This makes it possible to provide OS-independent modules (for

+a given CPU architecture type).  In addition to this, the loader can

+load modules via the OS-provided &s.code;dlopen(3)&e.code; service where

+available.  Such modules are not platform independent, and the semantics

+of &s.code;dlopen()&e.code; on most systems results in significant

+limitations in the use of modules of this type.  Support for

+&s.code;dlopen()&e.code; modules in the loader is primarily for

+experimental and development purposes.

+

+Symbols exported by the loader (on behalf of the core X server) to

+modules are determined at compile time.  Only those symbols explicitly

+exported are available to modules.  All external symbols of loaded

+modules are exported to other modules, and to the core X server.  The

+loader can be requested to check for unresolved symbols at any time,

+and the action to be taken for unresolved symbols can be controlled by

+the caller of the loader.  Typically the caller identifies which symbols

+can safely remain unresolved and which cannot.

+

+NOTE:  Now that ISO-C allows pointers to functions and pointers to data to

+have different internal representations, some of the following interfaces

+will need to be revisited.

+

+<sect1>Semi-private Loader Interface

+<p>

+

+The following is the semi-private loader interface that is available to the

+XFree86 common layer.

+

+  <quote><p>

+  &s.code;void LoaderInit(void)&e.code;

+  <quote><p>

+    The &s.code;LoaderInit()&e.code; function initialises the loader,

+    and it must be called once before calling any other loader functions.

+    This function initialises the tables of exported symbols, and anything

+    else that might need to be initialised.

+

+  </quote>

+

+  &s.code;void LoaderSetPath(const char *path)&e.code;

+  <quote><p>

+    The &s.code;LoaderSetPath()&e.code; function initialises a default

+    module search path.  This must be called if calls to other functions

+    are to be made without explicitly specifying a module search path.

+    The search path &s.code;path&e.code; must be a string of one or more

+    comma separated absolute paths.  Modules are expected to be located

+    below these paths, possibly in subdirectories of these paths.

+

+  </quote>

+

+  &s.code;pointer LoadModule(const char *module, const char *path,

+		&f.indent;const char **subdirlist, const char **patternlist,

+		&f.indent;pointer options, const XF86ModReqInfo * modreq,

+		&f.indent;int *errmaj, int *errmin)&e.code;

+  <quote><p>

+    The &s.code;LoadModule()&e.code; function loads the module called

+    &s.code;module&e.code;.  The return value is a module handle, and

+    may be used in future calls to the loader that require a reference

+    to a loaded module.  The module name &s.code;module&e.code; is

+    normally the module's canonical name, which doesn't contain any

+    directory path information, or any object/library file prefixes of

+    suffixes.  Currently a full pathname and/or filename is also accepted.

+    This might change.  The other parameters are:

+

+      &s.code;path&e.code;

+	<quote><p>

+		  An optional comma-separated list of module search paths.

+                  When &s.code;NULL&e.code;, the default search path is used.

+

+	</quote>

+

+      &s.code;subdirlist&e.code;

+	<quote><p>

+		  An optional &s.code;NULL&e.code; terminated list of

+		  subdirectories to search.  When &s.code;NULL&e.code;,

+		  the default built-in list is used (refer to

+		  &s.code;stdSubdirs&e.code; in &s.code;loadmod.c&e.code;).

+		  The default list is also substituted for entries in

+		  &s.code;subdirlist&e.code; with the value

+		  &s.code;DEFAULT_LIST&e.code;.  This makes is possible

+		  to augment the default list instead of replacing it.

+		  Subdir elements must be relative, and must not contain

+		  &s.code;".."&e.code;.  If any violate this requirement,

+		  the load fails.

+

+	</quote>

+

+      &s.code;patternlist&e.code;

+	<quote><p>

+		  An optional &s.code;NULL&e.code; terminated list of

+		  POSIX regular expressions used to connect module

+		  filenames with canonical module names.  Each regex

+		  should contain exactly one subexpression that corresponds

+		  to the canonical module name.  When &s.code;NULL&e.code;,

+		  the default built-in list is used (refer to

+		  &s.code;stdPatterns&e.code; in

+		  &s.code;loadmod.c&e.code;).  The default list is also

+		  substituted for entries in &s.code;patternlist&e.code;

+		  with the value &s.code;DEFAULT_LIST&e.code;.  This

+		  makes it possible to augment the default list instead

+		  of replacing it.

+

+	</quote>

+

+      &s.code;options&e.code;

+	<quote><p>

+		  An optional parameter that is passed to the newly

+		  loaded module's &s.code;SetupProc&e.code; function

+		  (if it has one).  This argument is normally a

+		  &s.code;NULL&e.code; terminated list of

+		  &s.code;Options&e.code;, and must be interpreted that

+		  way by modules loaded directly by the XFree86 common

+		  layer.  However, it may be used for application-specific

+		  parameter passing in other situations.

+

+		  When loading ``external'' modules (modules that don't

+		  have the standard entry point, for example a

+		  special shared library) the options parameter can be

+		  set to &s.code;EXTERN_MODULE&e.code; to tell the

+		  loader not to reject the module when it doesn't find

+		  the standard entry point.

+

+	</quote>

+

+      &s.code;modreq&e.code;

+	<quote><p>

+		  An optional &s.code;XF86ModReqInfo*&e.code; containing

+		  version/ABI/vendor information to requirements to

+		  check the newly loaded module against.  The main

+		  purpose of this is to allow the loader to verify that

+		  a module of the correct type/version before running

+		  its &s.code;SetupProc&e.code; function.

+

+		  The &s.code;XF86ModReqInfo&e.code; struct is defined

+		  as follows:

+<verb>

+typedef struct {

+	CARD8        majorversion;  /* MAJOR_UNSPEC */

+	CARD8        minorversion;  /* MINOR_UNSPEC */

+	CARD16       patchlevel;    /* PATCH_UNSPEC */

+	const char * abiclass;      /* ABI_CLASS_NONE */

+	CARD32       abiversion;    /* ABI_VERS_UNSPEC */

+	const char * moduleclass;   /* MOD_CLASS_NONE */

+} XF86ModReqInfo;

+</verb>

+

+		  The information here is compared against the equivalent

+		  information in the module's

+		  &s.code;XF86ModuleVersionInfo&e.code; record (which

+		  is described below).  The values in comments above

+		  indicate ``don't care'' settings for each of the fields.

+		  The comparisons made are as follows:

+

+                    &s.code;majorversion&e.code;

+			<quote><p>

+				   Must match the module's majorversion

+				   exactly.

+

+			</quote>

+                    &s.code;minorversion&e.code;

+			<quote><p>

+				   The module's minor version must be

+				   no less than this value.  This

+				   comparison is only made if

+				   &s.code;majorversion&e.code; is

+				   specified and matches.

+

+			</quote>

+                    &s.code;patchlevel&e.code;

+			<quote><p>

+				   The module's patchlevel must be no

+				   less than this value.  This comparison

+				   is only made if

+				   &s.code;minorversion&e.code; is

+				   specified and matches.

+

+			</quote>

+                    &s.code;abiclass&e.code;

+			<quote><p>

+				   String must match the module's abiclass

+				   string.

+

+			</quote>

+                    &s.code;abiversion&e.code;

+			<quote><p>

+				   Must be consistent with the module's

+				   abiversion (major equal, minor no

+				   older).

+

+			</quote>

+                    &s.code;moduleclass&e.code;

+			<quote><p>

+				   String must match the module's

+				   moduleclass string.

+

+			</quote>

+

+	</quote>

+

+      &s.code;errmaj&e.code;

+	<quote><p>

+		  An optional pointer to a variable holding the major

+		  part or the error code.  When provided,

+		  &s.code;*errmaj&e.code; is filled in when

+		  &s.code;LoadModule()&e.code; fails.

+

+	</quote>

+

+      &s.code;errmin&e.code;

+	<quote><p>

+		  Like &s.code;errmaj&e.code;, but for the minor part

+		  of the error code.

+

+	</quote>

+

+  </quote>

+

+  &s.code;void UnloadModule(pointer mod)&e.code;

+  <quote><p>

+    This function unloads the module referred to by the handle mod.

+    All child modules are also unloaded recursively.  This function must

+    not be used to directly unload modules that are child modules (i.e.,

+    those that have been loaded with the &s.code;LoadSubModule()&e.code;

+    described below).

+

+  </quote>

+  </quote>

+

+<sect1>Module Requirements

+<p>

+

+Modules must provide information about themselves to the loader, and

+may optionally provide entry points for "setup" and "teardown" functions

+(those two functions are referred to here as &s.code;SetupProc&e.code;

+and &s.code;TearDownProc&e.code;).

+

+The module information is contained in the

+&s.code;XF86ModuleVersionInfo&e.code; struct, which is defined as follows:

+

+<quote><p><verb>

+typedef struct {

+    const char * modname;      /* name of module, e.g. "foo" */

+    const char * vendor;       /* vendor specific string */

+    CARD32       _modinfo1_;   /* constant MODINFOSTRING1/2 to find */

+    CARD32       _modinfo2_;   /* infoarea with a binary editor/sign tool */

+    CARD32       xf86version;  /* contains XF86_VERSION_CURRENT */

+    CARD8        majorversion; /* module-specific major version */

+    CARD8        minorversion; /* module-specific minor version */

+    CARD16       patchlevel;   /* module-specific patch level */

+    const char * abiclass;     /* ABI class that the module uses */

+    CARD32       abiversion;   /* ABI version */

+    const char * moduleclass;  /* module class */

+    CARD32       checksum[4];  /* contains a digital signature of the */

+                               /* version info structure */

+} XF86ModuleVersionInfo;

+</verb>

+

+The fields are used as follows:

+

+  &s.code;modname&e.code;

+	<quote><p>

+		The module's name.  This field is currently only for

+		informational purposes, but the loader may be modified

+		in future to require it to match the module's canonical

+                name.

+

+	</quote>

+

+  &s.code;vendor&e.code;

+	<quote><p>

+		The module vendor.  This field is for informational purposes

+                only.

+

+	</quote>

+

+  &s.code;_modinfo1_&e.code;

+	<quote><p>

+		This field holds the first part of a signature that can

+                be used to locate this structure in the binary.  It should

+                always be initialised to &s.code;MODINFOSTRING1&e.code;.

+

+	</quote>

+

+  &s.code;_modinfo2_&e.code;

+	<quote><p>

+		This field holds the second part of a signature that can

+                be used to locate this structure in the binary.  It should

+                always be initialised to &s.code;MODINFOSTRING2&e.code;.

+

+	</quote>

+

+  &s.code;xf86version&e.code;

+	<quote><p>

+		The XFree86 version against which the module was compiled.

+                This is mostly for informational/diagnostic purposes.  It

+                should be initialised to &s.code;XF86_VERSION_CURRENT&e.code;, which is

+                defined in &s.code;xf86Version.h&e.code;.

+

+	</quote>

+

+  &s.code;majorversion&e.code;

+	<quote><p>

+		The module-specific major version.  For modules where this

+		version is used for more than simply informational

+		purposes, the major version should only change (be

+		incremented) when ABI incompatibilities are introduced,

+		or ABI components are removed.

+

+	</quote>

+

+  &s.code;minorversion&e.code;

+	<quote><p>

+		The module-specific minor version.  For modules where this

+		version is used for more than simply informational

+		purposes, the minor version should only change (be

+		incremented) when ABI additions are made in a backward

+		compatible way.  It should be reset to zero when the major

+                version is increased.

+

+	</quote>

+

+  &s.code;patchlevel&e.code;

+	<quote><p>

+		The module-specific patch level.  The patch level should

+		increase with new revisions of the module where there

+		are no ABI changes, and it should be reset to zero when

+		the minor version is increased.

+

+	</quote>

+

+  &s.code;abiclass&e.code;

+	<quote><p>

+		The ABI class that the module requires.  The class is

+                specified as a string for easy extensibility.  It should

+		indicate which (if any) of the X server's built-in ABI

+		classes that the module relies on, or a third-party ABI

+                if appropriate.  Built-in ABI classes currently defined are:

+

+		<quote>

+                   &s.code;ABI_CLASS_NONE&e.code;

+			<quote>no class</quote>

+                   &s.code;ABI_CLASS_ANSIC&e.code;

+			<quote>only requires the ANSI C interfaces</quote>

+                   &s.code;ABI_CLASS_VIDEODRV&e.code;

+			<quote>requires the video driver ABI</quote>

+                   &s.code;ABI_CLASS_XINPUT&e.code;

+			<quote>requires the XInput driver ABI</quote>

+                   &s.code;ABI_CLASS_EXTENSION&e.code;

+			<quote>requires the extension module ABI</quote>

+                   &s.code;ABI_CLASS_FONT&e.code;

+			<quote>requires the font module ABI</quote>

+		</quote>

+

+	</quote>

+

+  &s.code;abiversion&e.code;

+	<quote><p>

+		The version of abiclass that the module requires.  The

+		version consists of major and minor components.  The

+		major version must match and the minor version must be

+		no newer than that provided by the server or parent

+		module.  Version identifiers for the built-in classes

+		currently defined are:

+

+		<quote>

+                   &s.code;ABI_ANSIC_VERSION&nl;

+                   ABI_VIDEODRV_VERSION&nl;

+                   ABI_XINPUT_VERSION&nl;

+                   ABI_EXTENSION_VERSION&nl;

+                   ABI_FONT_VERSION&e.code;

+		</quote>

+

+	</quote>

+

+  &s.code;moduleclass&e.code;

+	<quote><p>

+		This is similar to the abiclass field, except that it

+		defines the type of module rather than the ABI it

+		requires.  For example, although all video drivers require

+		the video driver ABI, not all modules that require the

+		video driver ABI are video drivers.  This distinction

+		can be made with the moduleclass.  Currently pre-defined

+		module classes are:

+

+		<quote>

+                   &s.code;MOD_CLASS_NONE&nl;

+                   MOD_CLASS_VIDEODRV&nl;

+                   MOD_CLASS_XINPUT&nl;

+                   MOD_CLASS_FONT&nl;

+                   MOD_CLASS_EXTENSION&e.code;

+		</quote>

+

+	</quote>

+

+  &s.code;checksum&e.code;

+	<quote><p>

+		Not currently used.

+

+	</quote>

+

+</quote>

+

+The module version information, and the optional &s.code;SetupProc&e.code;

+and &s.code;TearDownProc&e.code; entry points are found by the loader

+by locating a data object in the module called "modnameModuleData",

+where "modname" is the canonical name of the module.  Modules must

+contain such a data object, and it must be declared with global scope,

+be compile-time initialised, and is of the following type:

+

+<quote>

+<verb>

+typedef struct {

+    XF86ModuleVersionInfo *     vers;

+    ModuleSetupProc             setup;

+    ModuleTearDownProc          teardown;

+} XF86ModuleData;

+</verb>

+</quote>

+

+The vers parameter must be initialised to a pointer to a correctly

+initialised &s.code;XF86ModuleVersionInfo&e.code; struct.  The other

+two parameter are optional, and should be initialised to

+&s.code;NULL&e.code; when not required.  The other parameters are defined

+as

+

+  <quote><p>

+  &s.code;typedef pointer (*ModuleSetupProc)(pointer, pointer, int *, int *)&e.code;

+

+  &s.code;typedef void (*ModuleTearDownProc)(pointer)&e.code;

+

+

+  &s.code;pointer SetupProc(pointer module, pointer options,

+		&f.indent;int *errmaj, int *errmin)&e.code;

+  <quote><p>

+    When defined, this function is called by the loader after successfully

+    loading a module.  module is a handle for the newly loaded module,

+    and maybe used by the &s.code;SetupProc&e.code; if it calls other

+    loader functions that require a reference to it.   The remaining

+    arguments are those that were passed to the

+    &s.code;LoadModule()&e.code; (or &s.code;LoadSubModule()&e.code;),

+    and are described above. When the &s.code;SetupProc&e.code; is

+    successful it must return a non-&s.code;NULL&e.code; value.  The

+    loader checks this, and if it is &s.code;NULL&e.code; it unloads

+    the module and reports the failure to the caller of

+    &s.code;LoadModule()&e.code;.  If the &s.code;SetupProc&e.code;

+    does things that need to be undone when the module is unloaded,

+    it should define a &s.code;TearDownProc&e.code;, and return a

+    pointer that the &s.code;TearDownProc&e.code; can use to undo what

+    has been done.

+

+    When a module is loaded multiple times, the &s.code;SetupProc&e.code;

+    is called once for each time it is loaded.

+

+  </quote>

+

+  &s.code;void TearDownProc(pointer tearDownData)&e.code;

+  <quote><p>

+    When defined, this function is called when the loader unloads a

+    module.  The &s.code;tearDownData&e.code; parameter is the return

+    value of the &s.code;SetupProc()&e.code; that was called when the

+    module was loaded.  The purpose of this function is to clean up

+    before the module is unloaded (for example, by freeing allocated

+    resources).

+

+  </quote>

+  </quote>

+

+<sect1>Public Loader Interface

+<p>

+

+The following is the Loader interface that is available to any part of

+the server, and may also be used from within modules.

+

+  <quote><p>

+  &s.code;pointer LoadSubModule(pointer parent, const char *module,

+		&f.indent;const char **subdirlist, const char **patternlist,

+		&f.indent;pointer options, const XF86ModReqInfo * modreq,

+		&f.indent;int *errmaj, int *errmin)&e.code;

+  <quote><p>

+    This function is like the &s.code;LoadModule()&e.code; function

+    described above, except that the module loaded is registered as a

+    child of the calling module.  The &s.code;parent&e.code; parameter

+    is the calling module's handle.  Modules loaded with this function

+    are automatically unloaded when the parent module is unloaded.  The

+    other difference is that the path parameter may not be specified.

+    The module search path used for modules loaded with this function

+    is the default search path as initialised with

+    &s.code;LoaderSetPath()&e.code;.

+

+  </quote>

+

+  &s.code;void UnloadSubModule(pointer module)&e.code;

+  <quote><p>

+    This function unloads the module with handle &s.code;module&e.code;.

+    If that module itself has children, they are also unloaded.  It is

+    like &s.code;UnloadModule()&e.code;, except that it is safe to use

+    for unloading child modules.

+

+  </quote>

+

+  &s.code;pointer LoaderSymbol(const char *symbol)&e.code;

+  <quote><p>

+    This function returns the address of the symbol with name

+    &s.code;symbol&e.code;.  This may be used to locate a module entry

+    point with a known name.

+

+  </quote>

+

+  &s.code;char **LoaderlistDirs(const char **subdirlist,

+			&f.indent;const char **patternlist)&e.code;

+  <quote><p>

+    This function returns a &s.code;NULL&e.code; terminated list of

+    canonical modules names for modules found in the default module

+    search path.  The &s.code;subdirlist&e.code; and

+    &s.code;patternlist&e.code; parameters are as described above, and

+    can be used to control the locations and names that are searched.

+    If no modules are found, the return value is &s.code;NULL&e.code;.

+    The returned list should be freed by calling

+    &s.code;LoaderFreeDirList()&e.code; when it is no longer needed.

+

+  </quote>

+

+  &s.code;void LoaderFreeDirList(char **list)&e.code;

+  <quote><p>

+    This function frees a module list created by

+    &s.code;LoaderlistDirs()&e.code;.

+

+  </quote>

+

+  &s.code;void LoaderReqSymLists(const char **list0, ...)&e.code;

+  <quote><p>

+    This function allows the registration of required symbols with the

+    loader.  It is normally used by a caller of

+    &s.code;LoadSubModule()&e.code;.  If any symbols registered in this

+    way are found to be unresolved when

+    &s.code;LoaderCheckUnresolved()&e.code; is called then

+    &s.code;LoaderCheckUnresolved()&e.code; will report a failure.

+    The function takes one or more &s.code;NULL&e.code; terminated

+    lists of symbols.  The end of the argument list is indicated by a

+    &s.code;NULL&e.code; argument.

+

+  </quote>

+

+  &s.code;void LoaderReqSymbols(const char *sym0, ...)&e.code;

+  <quote><p>

+    This function is like &s.code;LoaderReqSymLists()&e.code; except

+    that its arguments are symbols rather than lists of symbols.  This

+    function is more convenient when single functions are to be registered,

+    especially when the single function might depend on runtime factors.

+    The end of the argument list is indicated by a &s.code;NULL&e.code;

+    argument.

+

+  </quote>

+

+  &s.code;void LoaderRefSymLists(const char **list0, ...)&e.code;

+  <quote><p>

+    This function allows the registration of possibly unresolved symbols

+    with the loader.  When &s.code;LoaderCheckUnresolved()&e.code; is

+    run it won't generate warnings for symbols registered in this way

+    unless they were also registered as required symbols.

+    The function takes one or more &s.code;NULL&e.code; terminated

+    lists of symbols.  The end of the argument list is indicated by a

+    &s.code;NULL&e.code; argument.

+

+  </quote>

+

+  &s.code;void LoaderRefSymbols(const char *sym0, ...)&e.code;

+  <quote><p>

+    This function is like &s.code;LoaderRefSymLists()&e.code; except

+    that its arguments are symbols rather than lists of symbols.  This

+    function is more convenient when single functions are to be registered,

+    especially when the single function might depend on runtime factors.

+    The end of the argument list is indicated by a &s.code;NULL&e.code;

+    argument.

+

+  </quote>

+

+  &s.code;int LoaderCheckUnresolved(int delayflag)&e.code;

+  <quote><p>

+    This function checks for unresolved symbols.  It generates warnings

+    for unresolved symbols that have not been registered with

+    &s.code;LoaderRefSymLists()&e.code;, and maps them to a dummy

+    function.  This behaviour may change in future.  If unresolved

+    symbols are found that have been registered with

+    &s.code;LoaderReqSymLists()&e.code; or

+    &s.code;LoaderReqSymbols()&e.code; then this function returns a

+    non-zero value.  If none of these symbols are unresolved the return

+    value is zero, indicating success.

+

+    The &s.code;delayflag&e.code; parameter should normally be set to

+    &s.code;LD_RESOLV_IFDONE&e.code;.

+

+  </quote>

+

+  &s.code;LoaderErrorMsg(const char *name, const char *modname,

+			&f.indent;int errmaj, int errmin)&e.code;

+  <quote><p>

+    This function prints an error message that includes the text ``Failed

+    to load module'', the module name &s.code;modname&e.code;, a message

+    specific to the &s.code;errmaj&e.code; value, and the value if

+    &s.code;errmin&e.code;.  If &s.code;name&e.code; is

+    non-&s.code;NULL&e.code;, it is printed as an identifying prefix

+    to the message (followed by a `:').

+

+  </quote>

+  </quote>

+

+<sect1>Special Registration Functions

+<p>

+

+The loader contains some functions for registering some classes of modules.

+These may be moved out of the loader at some point.

+

+  <quote><p>

+  &s.code;void LoadExtension(ExtensionModule *ext)&e.code;

+  <quote><p>

+    This registers the entry points for the extension identified by

+    &s.code;ext&e.code;.  The &s.code;ExtensionModule&e.code; struct is

+    defined as:

+

+<quote>

+<verb>

+typedef struct {

+    InitExtension       initFunc;

+    char *              name;

+    Bool                *disablePtr;

+    InitExtension       setupFunc;

+} ExtensionModule;

+</verb>

+</quote>

+

+  </quote>

+

+  &s.code;void LoadFont(FontModule *font)&e.code;

+  <quote><p>

+    This registers the entry points for the font rasteriser module

+    identified by &s.code;font&e.code;.  The &s.code;FontModule&e.code;

+    struct is defined as:

+

+<quote>

+<verb>

+typedef struct {

+    InitFont    initFunc;

+    char *      name;

+    pointer     module;

+} FontModule;

+</verb>

+</quote>

+

+  </quote>

+  </quote>

+

+</sect>

+

+

+<sect>Helper Functions

+<p>

+

+This section describe ``helper'' functions that video driver

+might find useful.  While video drivers are not required to use any of

+these to be considered ``compliant'', the use of appropriate helpers is

+strongly encouraged to improve the consistency of driver behaviour.

+

+<sect1>Functions for printing messages

+<p>

+

+  <quote><p>

+    &s.code;ErrorF(const char *format, ...)&e.code;

+    <quote><p>

+      This is the basic function for writing to the error log (typically

+      stderr and/or a log file).  Video drivers should usually avoid

+      using this directly in favour of the more specialised functions

+      described below.  This function is useful for printing messages

+      while debugging a driver.

+

+    </quote>

+

+    &s.code;FatalError(const char *format, ...)&e.code;

+    <quote><p>

+      This prints a message and causes the Xserver to abort.  It should

+      rarely be used within a video driver, as most error conditions

+      should be flagged by the return values of the driver functions.

+      This allows the higher layers to decide how to proceed.  In rare

+      cases, this can be used within a driver if a fatal unexpected

+      condition is found.

+

+    </quote>

+

+    &s.code;xf86ErrorF(const char *format, ...)&e.code;

+    <quote><p>

+      This is like &s.code;ErrorF()&e.code;, except that the message is

+      only printed when the Xserver's verbosity level is set to the

+      default (&s.code;1&e.code;) or higher.  It means that the messages

+      are not printed when the server is started with the

+      &s.cmd;-quiet&e.cmd; flag.  Typically this function would only be

+      used for continuing messages started with one of the more specialised

+      functions described below.

+

+    </quote>

+

+    &s.code;xf86ErrorFVerb(int verb, const char *format, ...)&e.code;

+    <quote><p>

+      Like &s.code;xf86ErrorF()&e.code;, except the minimum verbosity

+      level for which the message is to be printed is given explicitly.

+      Passing a &s.code;verb&e.code; value of zero means the message

+      is always printed.  A value higher than &s.code;1&e.code; can be

+      used for information would normally not be needed, but which might

+      be useful when diagnosing problems.

+

+    </quote>

+

+    &s.code;xf86Msg(MessageType type, const char *format, ...)&e.code;

+    <quote><p>

+      This is like &s.code;xf86ErrorF()&e.code;, except that the message

+      is prefixed with a marker determined by the value of

+      &s.code;type&e.code;.  The marker is used to indicate the type of

+      message (warning, error, probed value, config value, etc).  Note

+      the &s.code;xf86Verbose&e.code; value is ignored for messages of

+      type &s.code;X_ERROR&e.code;.

+

+      The marker values are:

+

+      <quote>

+      &s.code;X_PROBED&e.code;

+	<quote>Value was probed.</quote>

+      &s.code;X_CONFIG&e.code;

+	<quote>Value was given in the config file.</quote>

+      &s.code;X_DEFAULT&e.code;

+	<quote>Value is a default.</quote>

+      &s.code;X_CMDLINE&e.code;

+	<quote>Value was given on the command line.</quote>

+      &s.code;X_NOTICE&e.code;

+	<quote>Notice.</quote>

+      &s.code;X_ERROR&e.code;

+	<quote>Error message.</quote>

+      &s.code;X_WARNING&e.code;

+	<quote>Warning message.</quote>

+      &s.code;X_INFO&e.code;

+	<quote>Informational message.</quote>

+      &s.code;X_NONE&e.code;

+	<quote>No prefix.</quote>

+      &s.code;X_NOT_IMPLEMENTED&e.code;

+	<quote>The message relates to functionality that is not yet

+               implemented.</quote>

+      </quote>

+

+

+    </quote>

+

+    &s.code;xf86MsgVerb(MessageType type, int verb, const char *format, ...)&e.code;

+    <quote><p>

+      Like &s.code;xf86Msg()&e.code;, but with the verbosity level given

+      explicitly.

+

+    </quote>

+

+    &s.code;xf86DrvMsg(int scrnIndex, MessageType type, const char *format, ...)&e.code;

+    <quote><p>

+      This is like &s.code;xf86Msg()&e.code; except that the driver's

+      name (the &s.code;name&e.code; field of the

+      &s.code;ScrnInfoRec&e.code;) followed by the

+      &s.code;scrnIndex&e.code; in parentheses is printed following the

+      prefix.  This should be used by video drivers in most cases as it

+      clearly indicates which driver/screen the message is for.  If

+      &s.code;scrnIndex&e.code; is negative, this function behaves

+      exactly like &s.code;xf86Msg()&e.code;.

+

+      NOTE: This function can only be used after the

+      &s.code;ScrnInfoRec&e.code; and its &s.code;name&e.code; field

+      have been allocated.  Normally, this means that it can not be

+      used before the END of the &s.code;ChipProbe()&e.code; function.

+      Prior to that, use &s.code;xf86Msg()&e.code;, providing the

+      driver's name explicitly.  No screen number can be supplied at

+      that point.

+

+    </quote>

+

+    &s.code;xf86DrvMsgVerb(int scrnIndex, MessageType type, int verb,

+		&f.indent;const char *format, ...)&e.code;

+    <quote><p>

+      Like &s.code;xf86DrvMsg()&e.code;, but with the verbosity level

+      given explicitly.

+

+    </quote>

+  </quote>

+

+

+<sect1>Functions for setting values based on command line and config file

+<p>

+

+  <quote><p>

+    &s.code;Bool xf86SetDepthBpp(ScrnInfoPtr scrp, int depth, int bpp,

+                        &f.indent;int fbbpp, int depth24flags)&e.code;

+    <quote><p>

+      This function sets the &s.code;depth&e.code;, &s.code;pixmapBPP&e.code; and &s.code;bitsPerPixel&e.code; fields

+      of the &s.code;ScrnInfoRec&e.code;.  It also determines the defaults for display-wide

+      attributes and pixmap formats the screen will support, and finds

+      the Display subsection that matches the depth/bpp.  This function

+      should normally be called very early from the

+      &s.code;ChipPreInit()&e.code; function.

+

+      It requires that the &s.code;confScreen&e.code; field of the &s.code;ScrnInfoRec&e.code; be

+      initialised prior to calling it.  This is done by the XFree86

+      common layer prior to calling &s.code;ChipPreInit()&e.code;.

+

+      The parameters passed are:

+

+        &s.code;depth&e.code;

+	<quote><p>

+		driver's preferred default depth if no other is given.

+                If zero, use the overall server default.

+

+	</quote>

+        &s.code;bpp&e.code;

+	<quote><p>

+		Same, but for the pixmap bpp.

+

+	</quote>

+        &s.code;fbbpp&e.code;

+	<quote><p>

+		Same, but for the framebuffer bpp.

+

+	</quote>

+        &s.code;depth24flags&e.code;

+	<quote><p>

+		Flags that indicate the level of 24/32bpp support

+                and whether conversion between different framebuffer

+                and pixmap formats is supported.  The flags for this

+                argument are defined as follows, and multiple flags

+                may be ORed together:

+

+               &s.code;NoDepth24Support&e.code;

+		<quote>No depth 24 formats supported</quote>

+               &s.code;Support24bppFb&e.code;

+		<quote>24bpp framebuffer supported</quote>

+               &s.code;Support32bppFb&e.code;

+		<quote>32bpp framebuffer supported</quote>

+               &s.code;SupportConvert24to32&e.code;

+		<quote>Can convert 24bpp pixmap to 32bpp fb</quote>

+               &s.code;SupportConvert32to24&e.code;

+		<quote>Can convert 32bpp pixmap to 24bpp fb</quote>

+               &s.code;ForceConvert24to32&e.code;

+		<quote>Force 24bpp pixmap to 32bpp fb conversion</quote>

+               &s.code;ForceConvert32to24&e.code;

+		<quote>Force 32bpp pixmap to 24bpp fb conversion</quote>

+

+	</quote>

+

+      It uses the command line, config file, and default values in the

+      correct order of precedence to determine the depth and bpp values.

+      It is up to the driver to check the results to see that it supports

+      them.  If not the &s.code;ChipPreInit()&e.code; function should

+      return &s.code;FALSE&e.code;.

+

+      If only one of depth/bpp is given, the other is set to a reasonable

+      (and consistent) default.

+

+      If a driver finds that the initial &s.code;depth24flags&e.code;

+      it uses later results in a fb format that requires more video

+      memory than is available it may call this function a second time

+      with a different &s.code;depth24flags&e.code; setting.

+

+      On success, the return value is &s.code;TRUE&e.code;.  On failure

+      it prints an error message and returns &s.code;FALSE&e.code;.

+

+      The following fields of the &s.code;ScrnInfoRec&e.code; are

+      initialised by this function:

+

+	<quote>

+	&s.code;depth&e.code;, &s.code;bitsPerPixel&e.code;,

+	&s.code;display&e.code;, &s.code;imageByteOrder&e.code;,

+	&s.code;bitmapScanlinePad&e.code;,

+	&s.code;bitmapScanlineUnit&e.code;, &s.code;bitmapBitOrder&e.code;,

+	&s.code;numFormats&e.code;, &s.code;formats&e.code;,

+	&s.code;fbFormat&e.code;.

+	</quote>

+

+    </quote>

+

+    &s.code;void xf86PrintDepthBpp(scrnInfoPtr scrp)&e.code;

+    <quote><p>

+      This function can be used to print out the depth and bpp settings.

+      It should be called after the final call to

+      &s.code;xf86SetDepthBpp()&e.code;.

+

+    </quote>

+

+    &s.code;Bool xf86SetWeight(ScrnInfoPtr scrp, rgb weight, rgb mask)&e.code;

+    <quote><p>

+      This function sets the &s.code;weight&e.code;, &s.code;mask&e.code;,

+      &s.code;offset&e.code; and &s.code;rgbBits&e.code; fields of the

+      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly

+      early in the &s.code;ChipPreInit()&e.code; function for

+      depths&nbsp;>&nbsp;8bpp.

+

+      It requires that the &s.code;depth&e.code; and

+      &s.code;display&e.code; fields of the &s.code;ScrnInfoRec&e.code;

+      be initialised prior to calling it.

+

+      The parameters passed are:

+

+        &s.code;weight&e.code;

+	<quote><p>

+		driver's preferred default weight if no other is given.

+                If zero, use the overall server default.

+

+	</quote>

+

+        &s.code;mask&e.code;

+	<quote><p>

+		Same, but for mask.

+

+	</quote>

+

+      It uses the command line, config file, and default values in the

+      correct order of precedence to determine the weight value.  It

+      derives the mask and offset values from the weight and the defaults.

+      It is up to the driver to check the results to see that it supports

+      them.  If not the &s.code;ChipPreInit()&e.code; function should

+      return &s.code;FALSE&e.code;.

+

+      On success, this function prints a message showing the weight

+      values selected, and returns &s.code;TRUE&e.code;.

+

+      On failure it prints an error message and returns &s.code;FALSE&e.code;.

+

+      The following fields of the &s.code;ScrnInfoRec&e.code; are

+      initialised by this function:

+

+	<quote>

+        &s.code;weight&e.code;, &s.code;mask&e.code;, &s.code;offset&e.code;.

+	</quote>

+

+    </quote>

+

+    &s.code;Bool xf86SetDefaultVisual(ScrnInfoPtr scrp, int visual)&e.code;

+    <quote><p>

+      This function sets the &s.code;defaultVisual&e.code; field of the

+      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly

+      early from the &s.code;ChipPreInit()&e.code; function.

+

+      It requires that the &s.code;depth&e.code; and

+      &s.code;display&e.code; fields of the &s.code;ScrnInfoRec&e.code;

+      be initialised prior to calling it.

+

+      The parameters passed are:

+

+        &s.code;visual&e.code;

+	<quote><p>

+		driver's preferred default visual if no other is given.

+		If &s.code;-1&e.code;, use the overall server default.

+

+	</quote>

+

+      It uses the command line, config file, and default values in the

+      correct order of precedence to determine the default visual value.

+      It is up to the driver to check the result to see that it supports

+      it.  If not the &s.code;ChipPreInit()&e.code; function should

+      return &s.code;FALSE&e.code;.

+

+      On success, this function prints a message showing the default visual

+      selected, and returns &s.code;TRUE&e.code;.

+

+      On failure it prints an error message and returns &s.code;FALSE&e.code;.

+

+    </quote>

+

+    &s.code;Bool xf86SetGamma(ScrnInfoPtr scrp, Gamma gamma)&e.code;

+    <quote><p>

+      This function sets the &s.code;gamma&e.code; field of the

+      &s.code;ScrnInfoRec&e.code;.  It would normally be called fairly

+      early from the &s.code;ChipPreInit()&e.code; function in cases

+      where the driver supports gamma correction.

+

+      It requires that the &s.code;monitor&e.code; field of the

+      &s.code;ScrnInfoRec&e.code; be initialised prior to calling it.

+

+      The parameters passed are:

+

+        &s.code;gamma&e.code;

+	<quote><p>

+		driver's preferred default gamma if no other is given.

+		If zero (&s.code;< 0.01&e.code;), use the overall server

+		default.

+

+	</quote>

+

+      It uses the command line, config file, and default values in the

+      correct order of precedence to determine the gamma value.  It is

+      up to the driver to check the results to see that it supports

+      them.  If not the &s.code;ChipPreInit()&e.code; function should

+      return &s.code;FALSE&e.code;.

+

+      On success, this function prints a message showing the gamma

+      value selected, and returns &s.code;TRUE&e.code;.

+

+      On failure it prints an error message and returns &s.code;FALSE&e.code;.

+

+    </quote>

+

+    &s.code;void xf86SetDpi(ScrnInfoPtr pScrn, int x, int y)&e.code;

+    <quote><p>

+      This function sets the &s.code;xDpi&e.code; and &s.code;yDpi&e.code;

+      fields of the &s.code;ScrnInfoRec&e.code;.  The driver can specify

+      preferred defaults by setting &s.code;x&e.code; and &s.code;y&e.code;

+      to non-zero values.  The &s.cmd;-dpi&e.cmd; command line option

+      overrides all other settings.  Otherwise, if the

+      &s.key;DisplaySize&e.key; entry is present in the screen's &k.monitor;

+      config file section, it is used together with the virtual size to

+      calculate the dpi values.  This function should be called after

+      all the mode resolution has been done.

+

+    </quote>

+

+    &s.code;void xf86SetBlackWhitePixels(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      This functions sets the &s.code;blackPixel&e.code; and

+      &s.code;whitePixel&e.code; fields of the &s.code;ScrnInfoRec&e.code;

+      according to whether or not the &s.cmd;-flipPixels&e.cmd; command

+      line options is present.

+

+    </quote>

+

+    &s.code;const char *xf86GetVisualName(int visual)&e.code;

+    <quote><p>

+      Returns a printable string with the visual name matching the

+      numerical visual class provided.  If the value is outside the

+      range of valid visual classes, &s.code;NULL&e.code; is returned.

+

+    </quote>

+  </quote>

+

+

+<sect1>Primary Mode functions

+<p>

+

+The primary mode helper functions are those which would normally be

+used by a driver, unless it has unusual requirements which cannot

+be catered for the by the helpers.

+

+  <quote><p>

+    &s.code;int xf86ValidateModes(ScrnInfoPtr scrp, DisplayModePtr availModes,

+		&f.indent;char **modeNames, ClockRangePtr clockRanges,

+		&f.indent;int *linePitches, int minPitch, int maxPitch,

+		&f.indent;int pitchInc, int minHeight, int maxHeight,

+		&f.indent;int virtualX, int virtualY,

+		&f.indent;unsigned long apertureSize,

+		&f.indent;LookupModeFlags strategy)&e.code;

+    <quote><p>

+      This function basically selects the set of modes to use based on

+      those available and the various constraints.  It also sets some

+      other related parameters.  It is normally called near the end of

+      the &s.code;ChipPreInit()&e.code; function.

+

+      The parameters passed to the function are:

+

+        &s.code;availModes&e.code;

+	<quote><p>

+		List of modes available for the monitor.

+

+	</quote>

+        &s.code;modeNames&e.code;

+	<quote><p>

+		List of mode names that the screen is requesting.

+

+	</quote>

+        &s.code;clockRanges&e.code;

+	<quote><p>

+		A list of clock ranges allowed by the driver.  Each

+		range includes whether interlaced or multiscan modes

+		are supported for that range.  See below for more on

+		&s.code;clockRanges&e.code;.

+

+	</quote>

+        &s.code;linePitches&e.code;

+	<quote><p>

+		List of line pitches supported by the driver.

+		This is optional and should be &s.code;NULL&e.code; when

+		not used.

+

+	</quote>

+        &s.code;minPitch&e.code;

+	<quote><p>

+		Minimum line pitch supported by the driver.  This must

+		be supplied when &s.code;linePitches&e.code; is

+		&s.code;NULL&e.code;, and is ignored otherwise.

+

+	</quote>

+        &s.code;maxPitch&e.code;

+	<quote><p>

+		Maximum line pitch supported by the driver.  This is

+		required when &s.code;minPitch&e.code; is required.

+

+	</quote>

+        &s.code;pitchInc&e.code;

+	<quote><p>

+		Granularity of horizontal pitch values as supported by

+		the chipset.  This is expressed in bits.  This must be

+		supplied.

+

+	</quote>

+        &s.code;minHeight&e.code;

+	<quote><p>

+		minimum virtual height allowed.  If zero, no limit is

+		imposed.

+

+	</quote>

+        &s.code;maxHeight&e.code;

+	<quote><p>

+		maximum virtual height allowed.  If zero, no limit is

+		imposed.

+

+	</quote>

+        &s.code;virtualX&e.code;

+	<quote><p>

+		If greater than zero, this is the virtual width value

+		that will be used.  Otherwise, the virtual width is

+		chosen to be the smallest that can accommodate the modes

+		selected.

+

+	</quote>

+        &s.code;virtualY&e.code;

+	<quote><p>

+		If greater than zero, this is the virtual height value

+		that will be used.  Otherwise, the virtual height is

+		chosen to be the smallest that can accommodate the modes

+		selected.

+

+	</quote>

+        &s.code;apertureSize&e.code;

+	<quote><p>

+		The size (in bytes) of the aperture used to access video

+		memory.

+

+	</quote>

+        &s.code;strategy&e.code;

+	<quote><p>

+		The strategy to use when choosing from multiple modes

+		with the same name.  The options are:

+

+                &s.code;LOOKUP_DEFAULT&e.code;

+		<quote>???</quote>

+                &s.code;LOOKUP_BEST_REFRESH&e.code;

+		<quote>mode with best refresh rate</quote>

+                &s.code;LOOKUP_CLOSEST_CLOCK&e.code;

+		<quote>mode with closest matching clock</quote>

+                &s.code;LOOKUP_LIST_ORDER&e.code;

+		<quote>first usable mode in list</quote>

+

+		The following options can also be combined (OR'ed) with

+		one of the above:

+

+                &s.code;LOOKUP_CLKDIV2&e.code;

+		<quote>Allow halved clocks</quote>

+		&s.code;LOOKUP_OPTIONAL_TOLERANCES&e.code;

+		<quote>Allow missing horizontal sync and/or vertical refresh

+		ranges in the xorg.conf Monitor section</quote>

+

+		&s.code;LOOKUP_OPTIONAL_TOLERANCES&e.code; should only be

+		specified when the driver can ensure all modes it generates

+		can sync on, or at least not damage, the monitor or digital

+		flat panel.  Horizontal sync and/or vertical refresh ranges

+		specified by the user will still be honoured (and acted upon).

+

+	</quote>

+

+      This function requires that the following fields of the

+      &s.code;ScrnInfoRec&e.code; are initialised prior to calling it:

+

+        &s.code;clock[]&e.code;

+	<quote>List of discrete clocks (when non-programmable)</quote>

+        &s.code;numClocks&e.code;

+	<quote>Number of discrete clocks (when non-programmable)</quote>

+        &s.code;progClock&e.code;

+	<quote>Whether the clock is programmable or not</quote>

+        &s.code;monitor&e.code;

+	<quote>Pointer to the applicable xorg.conf monitor section</quote>

+        &s.code;fdFormat&e.code;

+	<quote>Format of the screen buffer</quote>

+        &s.code;videoRam&e.code;

+	<quote>total video memory size (in bytes)</quote>

+        &s.code;maxHValue&e.code;

+	<quote>Maximum horizontal timing value allowed</quote>

+        &s.code;maxVValue&e.code;

+	<quote>Maximum vertical timing value allowed</quote>

+        &s.code;xInc&e.code;

+	<quote>Horizontal timing increment in pixels (defaults to 8)</quote>

+

+      This function fills in the following &s.code;ScrnInfoRec&e.code;

+      fields:

+

+        &s.code;modePool&e.code;

+	<quote><p>

+		A subset of the modes available to the monitor which

+                are compatible with the driver.

+

+	</quote>

+        &s.code;modes&e.code;

+	<quote><p>

+		One mode entry for each of the requested modes, with

+                the status field of each filled in to indicate if

+                the mode has been accepted or not.  This list of

+                modes is a circular list.

+

+	</quote>

+        &s.code;virtualX&e.code;

+	<quote><p>

+		The resulting virtual width.

+

+	</quote>

+        &s.code;virtualY&e.code;

+	<quote><p>

+		The resulting virtual height.

+

+	</quote>

+        &s.code;displayWidth&e.code;

+	<quote><p>

+		The resulting line pitch.

+

+	</quote>

+        &s.code;virtualFrom&e.code;

+	<quote><p>

+		Where the virtual size was determined from.

+

+	</quote>

+

+      The first stage of this function checks that the

+      &s.code;virtualX&e.code; and &s.code;virtualY&e.code; values

+      supplied (if greater than zero) are consistent with the line pitch

+      and &s.code;maxHeight&e.code; limitations.  If not, an error

+      message is printed, and the return value is &s.code;-1&e.code;.

+

+      The second stage sets up the mode pool, eliminating immediately

+      any modes that exceed the driver's line pitch limits, and also

+      the virtual width and height limits (if greater than zero).  For

+      each mode removed an informational message is printed at verbosity

+      level &s.code;2&e.code;.  If the mode pool ends up being empty,

+      a warning message is printed, and the return value is

+      &s.code;0&e.code;.

+

+      The final stage is to lookup each mode name, and fill in the remaining

+      parameters.  If an error condition is encountered, a message is

+      printed, and the return value is &s.code;-1&e.code;.  Otherwise,

+      the return value is the number of valid modes found

+      (&s.code;0&e.code; if none are found).

+

+      Even if the supplied mode names include duplicates, no two names will

+      ever match the same mode.  Furthermore, if the supplied mode names do not

+      yield a valid mode (including the case where no names are passed at all),

+      the function will continue looking through the mode pool until it finds

+      a mode that survives all checks, or until the mode pool is exhausted.

+

+      A message is only printed by this function when a fundamental

+      problem is found.  It is intended that this function may be called

+      more than once if there is more than one set of constraints that

+      the driver can work within.

+

+      If this function returns &s.code;-1&e.code;, the

+      &s.code;ChipPreInit()&e.code; function should return

+      &s.code;FALSE&e.code;.

+

+      &s.code;clockRanges&e.code; is a linked list of clock ranges

+      allowed by the driver.  If a mode doesn't fit in any of the defined

+      &s.code;clockRanges&e.code;, it is rejected.  The first

+      &s.code;clockRange&e.code; that matches all requirements is used.

+      This structure needs to be initialized to NULL when allocated.

+

+      &s.code;clockRanges&e.code; contains the following fields:

+

+        &s.code;minClock&nl;

+        maxClock&e.code;

+	<quote><p>

+		The lower and upper mode clock bounds for which the rest

+		of the &s.code;clockRange&e.code; parameters apply.

+		Since these are the mode clocks, they are not scaled

+		with the &s.code;ClockMulFactor&e.code; and

+		&s.code;ClockDivFactor&e.code;.  It is up to the driver

+		to adjust these values if they depend on the clock

+		scaling factors.

+

+	</quote>

+        &s.code;clockIndex&e.code;

+	<quote><p>

+		(not used yet) &s.code;-1&e.code; for programmable clocks

+

+	</quote>

+        &s.code;interlaceAllowed&e.code;

+	<quote><p>

+		&s.code;TRUE&e.code; if interlacing is allowed for this

+		range

+

+	</quote>

+        &s.code;doubleScanAllowed&e.code;

+	<quote><p>

+		&s.code;TRUE&e.code; if doublescan or multiscan is allowed

+		for this range

+

+	</quote>

+        &s.code;ClockMulFactor&nl;

+        ClockDivFactor&e.code;

+	<quote><p>

+		Scaling factors that are applied to the mode clocks ONLY

+		before selecting a clock index (when there is no

+		programmable clock) or a &s.code;SynthClock&e.code;

+		value.  This is useful for drivers that support pixel

+		multiplexing or that need to scale the clocks because

+		of hardware restrictions (like sending 24bpp data to an

+		8 bit RAMDAC using a tripled clock).

+

+		Note that these parameters describe what must be done

+		to the mode clock to achieve the data transport clock

+		between graphics controller and RAMDAC.  For example

+		for &s.code;2:1&e.code; pixel multiplexing, two pixels

+		are sent to the RAMDAC on each clock.  This allows the

+		RAMDAC clock to be half of the actual pixel clock.

+		Hence, &s.code;ClockMulFactor=1&e.code; and

+		&s.code;ClockDivFactor=2&e.code;.  This means that the

+		clock used for clock selection (ie, determining the

+		correct clock index from the list of discrete clocks)

+		or for the &s.code;SynthClock&e.code; field in case of

+		a programmable clock is:  (&s.code;mode-&gt;Clock *

+		ClockMulFactor) / ClockDivFactor&e.code;.

+

+	</quote>

+	&s.code;PrivFlags&e.code;

+	<quote><p>

+		This field is copied into the

+		&s.code;mode-&gt;PrivFlags&e.code; field when this

+		&s.code;clockRange&e.code; is selected by

+		&s.code;xf86ValidateModes()&e.code;.  It allows the

+		driver to find out what clock range was selected, so it

+		knows it needs to set up pixel multiplexing or any other

+		range-dependent feature.  This field is purely

+		driver-defined: it may contain flag bits, an index or

+		anything else (as long as it is an &s.code;INT&e.code;).

+	</quote>

+

+      Note that the &s.code;mode-&gt;SynthClock&e.code; field is always

+      filled in by &s.code;xf86ValidateModes()&e.code;: it will contain

+      the ``data transport clock'', which is the clock that will have

+      to be programmed in the chip when it has a programmable clock, or

+      the clock that will be picked from the clocks list when it is not

+      a programmable one.  Thus:

+

+         &s.code;mode-&gt;SynthClock =

+		&f.indent;(mode-&gt;Clock * ClockMulFactor) / ClockDivFactor&e.code;

+

+    </quote>

+

+    &s.code;void xf86PruneDriverModes(ScrnInfoPtr scrp)&e.code;

+    <quote><p>

+      This function deletes modes in the modes field of the

+      &s.code;ScrnInfoRec&e.code; that have been marked as invalid.

+      This is normally run after having run

+      &s.code;xf86ValidateModes()&e.code; for the last time.  For each

+      mode that is deleted, a warning message is printed out indicating

+      the reason for it being deleted.

+

+    </quote>

+

+    &s.code;void xf86SetCrtcForModes(ScrnInfoPtr scrp, int adjustFlags)&e.code;

+    <quote><p>

+      This function fills in the &s.code;Crtc*&e.code; fields for all

+      the modes in the &s.code;modes&e.code; field of the

+      &s.code;ScrnInfoRec&e.code;.  The &s.code;adjustFlags&e.code;

+      parameter determines how the vertical CRTC values are scaled for

+      interlaced modes.  They are halved if it is

+      &s.code;INTERLACE_HALVE_V&e.code;.  The vertical CRTC values are

+      doubled for doublescan modes, and are further multiplied by the

+      &s.code;VScan&e.code; value.

+

+      This function is normally called after calling

+      &s.code;xf86PruneDriverModes()&e.code;.

+

+    </quote>

+

+    &s.code;void xf86PrintModes(ScrnInfoPtr scrp)&e.code;

+    <quote><p>

+      This function prints out the virtual size setting, and the line

+      pitch being used.  It also prints out two lines for each mode being

+      used.  The first line includes the mode's pixel clock, horizontal sync

+      rate, refresh rate, and whether it is interlaced, doublescanned and/or

+      multi-scanned.  The second line is the mode's Modeline.

+

+      This function is normally called after calling

+      &s.code;xf86SetCrtcForModes()&e.code;.

+

+    </quote>

+  </quote>

+

+

+<sect1>Secondary Mode functions

+<p>

+

+The secondary mode helper functions are functions which are normally

+used by the primary mode helper functions, and which are not normally

+called directly by a driver.  If a driver has unusual requirements

+and needs to do its own mode validation, it might be able to make

+use of some of these secondary mode helper functions.

+

+  <quote><p>

+    &s.code;int xf86GetNearestClock(ScrnInfoPtr scrp, int freq, Bool allowDiv2,

+			&f.indent;int *divider)&e.code;

+    <quote><p>

+      This function returns the index of the closest clock to the

+      frequency &s.code;freq&e.code; given (in kHz).  It assumes that

+      the number of clocks is greater than zero.  It requires that the

+      &s.code;numClocks&e.code; and &s.code;clock&e.code; fields of the

+      &s.code;ScrnInfoRec&e.code; are initialised.  The

+      &s.code;allowDiv2&e.code; field determines if the clocks can be

+      halved.  The &s.code;*divider&e.code; return value indicates

+      whether clock division is used when determining the clock returned.

+

+      This function is only for non-programmable clocks.

+

+    </quote>

+

+    &s.code;const char *xf86ModeStatusToString(ModeStatus status)&e.code;

+    <quote><p>

+      This function converts the &s.code;status&e.code; value to a

+      descriptive printable string.

+

+    </quote>

+

+    &s.code;ModeStatus xf86LookupMode(ScrnInfoPtr scrp, DisplayModePtr modep,

+		&f.indent;ClockRangePtr clockRanges, LookupModeFlags strategy)&e.code;

+    <quote><p>

+      This function takes a pointer to a mode with the name filled in,

+      and looks for a mode in the &s.code;modePool&e.code; list which

+      matches.  The parameters of the matching mode are filled in to

+      &s.code;*modep&e.code;.  The &s.code;clockRanges&e.code; and

+      &s.code;strategy&e.code; parameters are as for the

+      &s.code;xf86ValidateModes()&e.code; function above.

+

+      This function requires the &s.code;modePool&e.code;,

+      &s.code;clock[]&e.code;, &s.code;numClocks&e.code; and

+      &s.code;progClock&e.code; fields of the &s.code;ScrnInfoRec&e.code;

+      to be initialised before being called.

+

+      The return value is &s.code;MODE_OK&e.code; if a mode was found.

+      Otherwise it indicates why a matching mode could not be found.

+

+    </quote>

+

+    &s.code;ModeStatus xf86InitialCheckModeForDriver(ScrnInfoPtr scrp,

+		&f.indent;DisplayModePtr mode, ClockRangePtr clockRanges,

+		&f.indent;LookupModeFlags strategy, int maxPitch,

+		&f.indent;int virtualX, int virtualY)&e.code;

+    <quote><p>

+      This function checks the passed mode against some basic driver

+      constraints.  Apart from the ones passed explicitly, the

+      &s.code;maxHValue&e.code; and &s.code;maxVValue&e.code; fields of

+      the &s.code;ScrnInfoRec&e.code; are also used.  If the

+      &s.code;ValidMode&e.code; field of the &s.code;ScrnInfoRec&e.code;

+      is set, that function is also called to check the mode.  Next, the

+      mode is checked against the monitor's constraints.

+

+      If the mode is consistent with all constraints, the return value

+      is &s.code;MODE_OK&e.code;.  Otherwise the return value indicates

+      which constraint wasn't met.

+

+    </quote>

+

+    &s.code;void xf86DeleteMode(DisplayModePtr *modeList, DisplayModePtr mode)&e.code;

+    <quote><p>

+      This function deletes the &s.code;mode&e.code; given from the

+      &s.code;modeList&e.code;.  It never prints any messages, so it is

+      up to the caller to print a message if required.

+

+    </quote>

+  </quote>

+

+<sect1>Functions for handling strings and tokens

+<p>

+

+    Tables associating strings and numerical tokens combined with the

+    following functions provide a compact way of handling strings from

+    the config file, and for converting tokens into printable strings.

+    The table data structure is:

+

+<quote><verb>

+typedef struct {

+    int                 token;

+    const char *        name;

+} SymTabRec, *SymTabPtr;

+</verb></quote>

+

+    A table is an initialised array of &s.code;SymTabRec&e.code;.  The

+    tokens must be non-negative integers.  Multiple names may be mapped

+    to a single token.  The table is terminated with an element with a

+    &s.code;token&e.code; value of &s.code;-1&e.code; and

+    &s.code;NULL&e.code; for the &s.code;name&e.code;.

+

+

+  <quote><p>

+    &s.code;const char *xf86TokenToString(SymTabPtr table, int token)&e.code;

+    <quote><p>

+      This function returns the first string in &s.code;table&e.code;

+      that matches &s.code;token&e.code;.  If no match is found,

+      &s.code;NULL&e.code; is returned (NOTE, older versions of this

+      function would return the string "unknown" when no match is found).

+

+    </quote>

+

+    &s.code;int xf86StringToToken(SymTabPtr table, const char *string)&e.code;

+    <quote><p>

+      This function returns the first token in &s.code;table&e.code;

+      that matches &s.code;string&e.code;.  The

+      &s.code;xf86NameCmp()&e.code; function is used to determine the

+      match.  If no match is found, &s.code;-1&e.code; is returned.

+

+    </quote>

+  </quote>

+

+

+<sect1>Functions for finding which config file entries to use

+<p>

+

+    These functions can be used to select the appropriate config file

+    entries that match the detected hardware.  They are described above

+    in the <ref id="probe" name="Probe"> and

+    <ref id="avail" name="Available Functions"> sections.

+

+

+<sect1>Probing discrete clocks on old hardware

+<p>

+

+    The &s.code;xf86GetClocks()&e.code; function may be used to assist

+    in finding the discrete pixel clock values on older hardware.

+

+

+  <quote><p>

+    &s.code;void xf86GetClocks(ScrnInfoPtr pScrn, int num,

+		&f.indent;Bool (*ClockFunc)(ScrnInfoPtr, int),

+		&f.indent;void (*ProtectRegs)(ScrnInfoPtr, Bool),

+		&f.indent;void (*BlankScreen)(ScrnInfoPtr, Bool),

+		&f.indent;int vertsyncreg, int maskval, int knownclkindex,

+		&f.indent;int knownclkvalue)&e.code;

+    <quote><p>

+      This function uses a comparative sampling method to measure the

+      discrete pixel clock values.  The number of discrete clocks to

+      measure is given by &s.code;num&e.code;.  &s.code;clockFunc&e.code;

+      is a function that selects the &s.code;n&e.code;'th clock.  It

+      should also save or restore any state affected by programming the

+      clocks when the index passed is &s.code;CLK_REG_SAVE&e.code; or

+      &s.code;CLK_REG_RESTORE&e.code;.  &s.code;ProtectRegs&e.code; is

+      a function that does whatever is required to protect the hardware

+      state while selecting a new clock.  &s.code;BlankScreen&e.code;

+      is a function that blanks the screen.  &s.code;vertsyncreg&e.code;

+      and &s.code;maskval&e.code; are the register and bitmask to

+      check for the presence of vertical sync pulses.

+      &s.code;knownclkindex&e.code; and &s.code;knownclkvalue&e.code;

+      are the index and value of a known clock.  These are the known

+      references on which the comparative measurements are based.  The

+      number of clocks probed is set in &s.code;pScrn-&gt;numClocks&e.code;,

+      and the probed clocks are set in the &s.code;pScrn-&gt;clock[]&e.code;

+      array.  All of the clock values are in units of kHz.

+

+    </quote>

+

+    &s.code;void xf86ShowClocks(ScrnInfoPtr scrp, MessageType from)&e.code;

+    <quote><p>

+      Print out the pixel clocks &s.code;scrp-&gt;clock[]&e.code;.

+      &s.code;from&e.code; indicates whether the clocks were probed

+      or from the config file.

+

+    </quote>

+  </quote>

+

+<sect1>Other helper functions

+<p>

+  <quote><p>

+    &s.code;Bool xf86IsUnblank(int mode)&e.code;

+    <quote><p>

+      Returns &s.code;TRUE&e.code; when the screen saver mode specified

+      by &s.code;mode&e.code; requires the screen be unblanked,

+      and &s.code;FALSE&e.code; otherwise.  The screen saver modes that

+      require blanking are &s.code;SCREEN_SAVER_ON&e.code; and

+      &s.code;SCREEN_SAVER_CYCLE&e.code;, and the screen saver modes that

+      require unblanking are &s.code;SCREEN_SAVER_OFF&e.code; and

+      &s.code;SCREEN_SAVER_FORCER&e.code;.  Drivers may call this helper

+      from their &s.code;SaveScreen()&e.code; function to interpret the

+      screen saver modes.

+

+    </quote>

+  </quote>

+

+<sect>The vgahw module

+<p>

+

+The vgahw modules provides an interface for saving, restoring and

+programming the standard VGA registers, and for handling VGA colourmaps.

+

+<sect1>Data Structures

+<p>

+

+    The public data structures used by the vgahw module are

+    &s.code;vgaRegRec&e.code; and &s.code;vgaHWRec&e.code;.  They are

+    defined in &s.code;vgaHW.h.&e.code;

+

+

+<sect1>General vgahw Functions

+<p>

+

+  <quote><p>

+    &s.code;Bool vgaHWGetHWRec(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      This function allocates a &s.code;vgaHWRec&e.code; structure, and

+      hooks it into the &s.code;ScrnInfoRec&e.code;'s

+      &s.code;privates&e.code;.  Like all information hooked into the

+      &s.code;privates&e.code;, it is persistent, and only needs to be

+      allocated once per screen.  This function should normally be called

+      from the driver's &s.code;ChipPreInit()&e.code; function.  The

+      &s.code;vgaHWRec&e.code; is zero-allocated, and the following

+      fields are explicitly initialised:

+

+        &s.code;ModeReg.DAC[]&e.code;

+	<quote>initialised with a default colourmap</quote>

+        &s.code;ModeReg.Attribute[0x11]&e.code;

+	<quote>initialised with the default overscan index</quote>

+        &s.code;ShowOverscan&e.code;

+	<quote>initialised according to the "ShowOverscan" option</quote>

+        &s.code;paletteEnabled&e.code;

+	<quote>initialised to FALSE</quote>

+        &s.code;cmapSaved&e.code;

+	<quote>initialised to FALSE</quote>

+        &s.code;pScrn&e.code;

+	<quote>initialised to pScrn</quote>

+

+      In addition to the above, &s.code;vgaHWSetStdFuncs()&e.code; is

+      called to initialise the register access function fields with the

+      standard VGA set of functions.

+

+      Once allocated, a pointer to the &s.code;vgaHWRec&e.code; can be

+      obtained from the &s.code;ScrnInfoPtr&e.code; with the

+      &s.code;VGAHWPTR(pScrn)&e.code; macro.

+

+    </quote>

+

+    &s.code;void vgaHWFreeHWRec(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      This function frees a &s.code;vgaHWRec&e.code; structure.  It

+      should be called from a driver's &s.code;ChipFreeScreen()&e.code;

+      function.

+

+    </quote>

+

+    &s.code;Bool vgaHWSetRegCounts(ScrnInfoPtr pScrn, int numCRTC,

+		&f.indent;int numSequencer, int numGraphics, int numAttribute)&e.code;

+    <quote><p>

+      This function allows the number of CRTC, Sequencer, Graphics and

+      Attribute registers to be changed.  This makes it possible for

+      extended registers to be saved and restored with

+      &s.code;vgaHWSave()&e.code; and &s.code;vgaHWRestore()&e.code;.

+      This function should be called after a &s.code;vgaHWRec&e.code;

+      has been allocated with &s.code;vgaHWGetHWRec()&e.code;.  The

+      default values are defined in &s.code;vgaHW.h&e.code; as follows:

+

+      <quote><verb>

+#define VGA_NUM_CRTC 25

+#define VGA_NUM_SEQ   5

+#define VGA_NUM_GFX   9

+#define VGA_NUM_ATTR 21

+      </verb></quote>

+

+    </quote>

+

+    &s.code;Bool vgaHWCopyReg(vgaRegPtr dst, vgaRegPtr src)&e.code;

+    <quote><p>

+      This function copies the contents of the VGA saved registers in

+      &s.code;src&e.code; to &s.code;dst&e.code;.  Note that it isn't

+      possible to simply do this with &s.code;memcpy()&e.code; (or

+      similar).  This function returns &s.code;TRUE&e.code; unless there

+      is a problem allocating space for the &s.code;CRTC&e.code and

+      related fields in &s.code;dst&e.code;.

+

+    </quote>

+

+    &s.code;void vgaHWSetStdFuncs(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function initialises the register access function fields of

+      &s.code;hwp&e.code; with the standard VGA set of functions.  This

+      is called by &s.code;vgaHWGetHWRec()&e.code;, so there is usually

+      no need to call this explicitly.  The register access functions

+      are described below.  If the registers are shadowed in some other

+      port I/O space (for example a PCI I/O region), these functions

+      can be used to access the shadowed registers if

+      &s.code;hwp-&gt;PIOOffset&e.code; is initialised with

+      &s.code;offset&e.code;, calculated in such a way that when the

+      standard VGA I/O port value is added to it the correct offset into

+      the PIO area results.  This value is initialised to zero in

+      &s.code;vgaHWGetHWRec()&e.code;.  (Note: the PIOOffset functionality

+      is present in XFree86 4.1.0 and later.)

+

+    </quote>

+

+    &s.code;void vgaHWSetMmioFuncs(vgaHWPtr hwp, CARD8 *base, int offset)&e.code;

+    <quote><p>

+      This function initialised the register access function fields of

+      hwp with a generic MMIO set of functions.

+      &s.code;hwp-&gt;MMIOBase&e.code; is initialised with

+      &s.code;base&e.code;, which must be the virtual address that the

+      start of MMIO area is mapped to.  &s.code;hwp-&gt;MMIOOffset&e.code;

+      is initialised with &s.code;offset&e.code;, which must be calculated

+      in such a way that when the standard VGA I/O port value is added

+      to it the correct offset into the MMIO area results.  That means

+      that these functions are only suitable when the VGA I/O ports are

+      made available in a direct mapping to the MMIO space.  If that is

+      not the case, the driver will need to provide its own register

+      access functions.  The register access functions are described

+      below.

+

+    </quote>

+

+    &s.code;Bool vgaHWMapMem(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      This function maps the VGA memory window.  It requires that the

+      &s.code;vgaHWRec&e.code; be allocated.  If a driver requires

+      non-default &s.code;MapPhys&e.code; or &s.code;MapSize&e.code;

+      settings (the physical location and size of the VGA memory window)

+      then those fields of the &s.code;vgaHWRec&e.code; must be initialised

+      before calling this function.  Otherwise, this function initialiases

+      the default values of &s.code;0xA0000&e.code; for

+      &s.code;MapPhys&e.code; and &s.code;(64&nbsp;*&nbsp;1024)&e.code; for

+      &s.code;MapSize&e.code;.  This function must be called before

+      attempting to save or restore the VGA state.  If the driver doesn't

+      call it explicitly, the &s.code;vgaHWSave()&e.code; and

+      &s.code;vgaHWRestore()&e.code; functions may call it if they need

+      to access the VGA memory (in which case they will also call

+      &s.code;vgaHWUnmapMem()&e.code; to unmap the VGA memory before

+      exiting).

+

+    </quote>

+

+    &s.code;void vgaHWUnmapMem(ScrnInfoPtr pScrn)&e.code;

+    <quote><p>

+      This function unmaps the VGA memory window.  It must only be called

+      after the memory has been mapped.  The &s.code;Base&e.code; field

+      of the &s.code;vgaHWRec&e.code; field is set to &s.code;NULL&e.code;

+      to indicate that the memory is no longer mapped.

+

+    </quote>

+

+    &s.code;void vgaHWGetIOBase(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function initialises the &s.code;IOBase&e.code; field of the

+      &s.code;vgaHWRec&e.code;.  This function must be called before

+      using any other functions that access the video hardware.

+

+      A macro &s.code;VGAHW_GET_IOBASE()&e.code; is also available in

+      &s.code;vgaHW.h&e.code; that returns the I/O base, and this may

+      be used when the vgahw module is not loaded (for example, in the

+      &s.code;ChipProbe()&e.code; function).

+

+    </quote>

+

+    &s.code;void vgaHWUnlock(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function unlocks the VGA &s.code;CRTC[0-7]&e.code; registers,

+      and must be called before attempting to write to those registers.

+

+    </quote>

+

+    &s.code;void vgaHWLock(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function locks the VGA &s.code;CRTC[0-7]&e.code; registers.

+

+    </quote>

+

+    &s.code;void vgaHWEnable(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function enables the VGA subsystem.  (Note, this function is

+      present in XFree86 4.1.0 and later.).

+

+    </quote>

+

+    &s.code;void vgaHWDisable(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      This function disables the VGA subsystem.  (Note, this function is

+      present in XFree86 4.1.0 and later.).

+

+    </quote>

+

+    &s.code;void vgaHWSave(ScrnInfoPtr pScrn, vgaRegPtr save, int flags)&e.code;

+    <quote><p>

+      This function saves the VGA state.  The state is written to the

+      &s.code;vgaRegRec&e.code; pointed to by &s.code;save&e.code;.

+      &s.code;flags&e.code; is set to one or more of the following flags

+      ORed together:

+

+        &s.code;VGA_SR_MODE&e.code;

+	<quote>the mode setting registers are saved</quote>

+        &s.code;VGA_SR_FONTS&e.code;

+	<quote>the text mode font/text data is saved</quote>

+        &s.code;VGA_SR_CMAP&e.code;

+	<quote>the colourmap (LUT) is saved</quote>

+        &s.code;VGA_SR_ALL&e.code;

+	<quote>all of the above are saved</quote>

+

+      The &s.code;vgaHWRec&e.code; and its &s.code;IOBase&e.code; fields

+      must be initialised before this function is called.  If

+      &s.code;VGA_SR_FONTS&e.code; is set in &s.code;flags&e.code;, the

+      VGA memory window must be mapped.  If it isn't then

+      &s.code;vgaHWMapMem()&e.code; will be called to map it, and

+      &s.code;vgaHWUnmapMem()&e.code; will be called to unmap it

+      afterwards.  &s.code;vgaHWSave()&e.code; uses the three functions

+      below in the order &s.code;vgaHWSaveColormap()&e.code;,

+      &s.code;vgaHWSaveMode()&e.code;, &s.code;vgaHWSaveFonts()&e.code; to

+      carry out the different save phases.  It is undecided at this

+      stage whether they will remain part of the vgahw module's public

+      interface or not.

+

+    </quote>

+

+    &s.code;void vgaHWSaveMode(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;

+    <quote><p>

+      This function saves the VGA mode registers.  They are saved to

+      the &s.code;vgaRegRec&e.code; pointed to by &s.code;save&e.code;.

+      The registers saved are:

+

+	<quote>

+        &s.code;MiscOut&nl;

+        CRTC[0-0x18]&nl;

+        Attribute[0-0x14]&nl;

+        Graphics[0-8]&nl;

+        Sequencer[0-4]&e.code;

+	</quote>

+

+    The number of registers actually saved may be modified by a prior call

+    to &s.code;vgaHWSetRegCounts()&e.code;.

+

+    </quote>

+

+    &s.code;void vgaHWSaveFonts(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;

+    <quote><p>

+      This function saves the text mode font and text data held in the

+      video memory.  If called while in a graphics mode, no save is

+      done.  The VGA memory window must be mapped with

+      &s.code;vgaHWMapMem()&e.code; before to calling this function.

+

+      On some platforms, one or more of the font/text plane saves may be

+      no-ops.  This is the case when the platform's VC driver already

+      takes care of this.

+

+    </quote>

+

+    &s.code;void vgaHWSaveColormap(ScrnInfoPtr pScrn, vgaRegPtr save)&e.code;

+    <quote><p>

+      This function saves the VGA colourmap (LUT).  Before saving it, it

+      attempts to verify that the colourmap is readable.  In rare cases

+      where it isn't readable, a default colourmap is saved instead.

+

+    </quote>

+

+    &s.code;void vgaHWRestore(ScrnInfoPtr pScrn, vgaRegPtr restore, int flags)&e.code;

+    <quote><p>

+      This function programs the VGA state.  The state programmed is

+      that contained in the &s.code;vgaRegRec&e.code; pointed to by

+      &s.code;restore&e.code;.  &s.code;flags&e.code; is the same

+      as described above for the &s.code;vgaHWSave()&e.code; function.

+

+      The &s.code;vgaHWRec&e.code; and its &s.code;IOBase&e.code; fields

+      must be initialised before this function is called.  If

+      &s.code;VGA_SR_FONTS&e.code; is set in &s.code;flags&e.code;, the

+      VGA memory window must be mapped.  If it isn't then

+      &s.code;vgaHWMapMem()&e.code; will be called to map it, and

+      &s.code;vgaHWUnmapMem()&e.code; will be called to unmap it

+      afterwards.  &s.code;vgaHWRestore()&e.code; uses the three functions

+      below in the order &s.code;vgaHWRestoreFonts()&e.code;,

+      &s.code;vgaHWRestoreMode()&e.code;,

+      &s.code;vgaHWRestoreColormap()&e.code; to carry out the different

+      restore phases.  It is undecided at this stage whether they will

+      remain part of the vgahw module's public interface or not.

+

+    </quote>

+

+    &s.code;void vgaHWRestoreMode(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;

+    <quote><p>

+      This function restores the VGA mode registers.  They are restored

+      from the data in the &s.code;vgaRegRec&e.code; pointed to by

+      &s.code;restore&e.code;.  The registers restored are:

+

+	<quote>

+        &s.code;MiscOut&nl;

+        CRTC[0-0x18]&nl;

+        Attribute[0-0x14]&nl;

+        Graphics[0-8]&nl;

+        Sequencer[0-4]&e.code;

+	</quote>

+

+    The number of registers actually restored may be modified by a prior call

+    to &s.code;vgaHWSetRegCounts()&e.code;.

+

+    </quote>

+

+    &s.code;void vgaHWRestoreFonts(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;

+    <quote><p>

+      This function restores the text mode font and text data to the

+      video memory.  The VGA memory window must be mapped with

+      &s.code;vgaHWMapMem()&e.code; before to calling this function.

+

+      On some platforms, one or more of the font/text plane restores

+      may be no-ops.  This is the case when the platform's VC driver

+      already takes care of this.

+

+    </quote>

+

+    &s.code;void vgaHWRestoreColormap(ScrnInfoPtr pScrn, vgaRegPtr restore)&e.code;

+    <quote><p>

+      This function restores the VGA colourmap (LUT).

+

+    </quote>

+

+    &s.code;void vgaHWInit(ScrnInfoPtr pScrn, DisplayModePtr mode)&e.code;

+    <quote><p>

+      This function fills in the &s.code;vgaHWRec&e.code;'s

+      &s.code;ModeReg&e.code; field with the values appropriate for

+      programming the given video mode.  It requires that the

+      &s.code;ScrnInfoRec&e.code;'s &s.code;depth&e.code; field is

+      initialised, which determines how the registers are programmed.

+

+    </quote>

+

+    &s.code;void vgaHWSeqReset(vgaHWPtr hwp, Bool start)&e.code;

+    <quote><p>

+      Do a VGA sequencer reset.  If start is &s.code;TRUE&e.code;, the

+      reset is started.  If start is &s.code;FALSE&e.code;, the reset

+      is ended.

+

+    </quote>

+

+    &s.code;void vgaHWProtect(ScrnInfoPtr pScrn, Bool on)&e.code;

+    <quote><p>

+      This function protects VGA registers and memory from corruption

+      during loads.  It is typically called with on set to

+      &s.code;TRUE&e.code; before programming, and with on set to

+      &s.code;FALSE&e.code; after programming.

+

+    </quote>

+

+    &s.code;Bool vgaHWSaveScreen(ScreenPtr pScreen, int mode)&e.code;

+    <quote><p>

+      This function blanks and unblanks the screen.  It is blanked when

+      &s.code;mode&e.code; is &s.code;SCREEN_SAVER_ON&e.code; or

+      &s.code;SCREEN_SAVER_CYCLE&e.code;, and unblanked when

+      &s.code;mode&e.code; is &s.code;SCREEN_SAVER_OFF&e.code; or

+      &s.code;SCREEN_SAVER_FORCER&e.code;.

+

+    </quote>

+

+    &s.code;void vgaHWBlankScreen(ScrnInfoPtr pScrn, Bool on)&e.code;

+    <quote><p>

+      This function blanks and unblanks the screen.  It is blanked when

+      &s.code;on&e.code; is &s.code;FALSE&e.code;, and unblanked when

+      &s.code;on&e.code; is &s.code;TRUE&e.code;.  This function is

+      provided for use in cases where the &s.code;ScrnInfoRec&e.code;

+      can't be derived from the &s.code;ScreenRec&e.code; (while probing

+      for clocks, for example).

+

+    </quote>

+  </quote>

+

+<sect1>VGA Colormap Functions

+<p>

+

+    The vgahw module uses the standard colormap support (see the

+    <ref id="cmap" name="Colormap Handling"> section.  This is initialised

+    with the following function:

+

+  <quote>

+      &s.code;Bool vgaHWHandleColormaps(ScreenPtr pScreen)&e.code;

+  </quote>

+

+

+<sect1>VGA Register Access Functions

+<p>

+

+    The vgahw module abstracts access to the standard VGA registers by

+    using a set of functions held in the &s.code;vgaHWRec&e.code;.  When

+    the &s.code;vgaHWRec&e.code; is created these function pointers are

+    initialised with the set of standard VGA I/O register access functions.

+    In addition to these, the vgahw module includes a basic set of MMIO

+    register access functions, and the &s.code;vgaHWRec&e.code; function

+    pointers can be initialised to these by calling the

+    &s.code;vgaHWSetMmioFuncs()&e.code; function described above.  Some

+    drivers/platforms may require a different set of functions for VGA

+    access.  The access functions are described here.

+

+

+  <quote><p>

+    &s.code;void writeCrtc(vgaHWPtr hwp, CARD8 index, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to CRTC register &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;CARD8 readCrtc(vgaHWPtr hwp, CARD8 index)&e.code;

+    <quote><p>

+      Return the value read from CRTC register &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;void writeGr(vgaHWPtr hwp, CARD8 index, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to Graphics Controller register

+      &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;CARD8 readGR(vgaHWPtr hwp, CARD8 index)&e.code;

+    <quote><p>

+      Return the value read from Graphics Controller register

+      &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;void writeSeq(vgaHWPtr hwp, CARD8 index, CARD8, value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to Sequencer register

+      &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;CARD8 readSeq(vgaHWPtr hwp, CARD8 index)&e.code;

+    <quote><p>

+      Return the value read from Sequencer register &s.code;index&e.code;.

+

+    </quote>

+

+    &s.code;void writeAttr(vgaHWPtr hwp, CARD8 index, CARD8, value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to Attribute Controller register

+      &s.code;index&e.code;.  When writing out the index value this

+      function should set bit 5 (&s.code;0x20&e.code;) according to the

+      setting of &s.code;hwp-&gt;paletteEnabled&e.code; in order to

+      preserve the palette access state.  It should be cleared when

+      &s.code;hwp-&gt;paletteEnabled&e.code; is &s.code;TRUE&e.code;

+      and set when it is &s.code;FALSE&e.code;.

+

+    </quote>

+

+    &s.code;CARD8 readAttr(vgaHWPtr hwp, CARD8 index)&e.code;

+    <quote><p>

+      Return the value read from Attribute Controller register

+      &s.code;index&e.code;.  When writing out the index value this

+      function should set bit 5 (&s.code;0x20&e.code;) according to the

+      setting of &s.code;hwp-&gt;paletteEnabled&e.code; in order to

+      preserve the palette access state.  It should be cleared when

+      &s.code;hwp-&gt;paletteEnabled&e.code; is &s.code;TRUE&e.code;

+      and set when it is &s.code;FALSE&e.code;.

+

+    </quote>

+

+    &s.code;void writeMiscOut(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write `&s.code;value&e.code;' to the Miscellaneous Output register.

+

+    </quote>

+

+    &s.code;CARD8 readMiscOut(vgwHWPtr hwp)&e.code;

+    <quote><p>

+      Return the value read from the Miscellaneous Output register.

+

+    </quote>

+

+    &s.code;void enablePalette(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      Clear the palette address source bit in the Attribute Controller

+      index register and set &s.code;hwp-&gt;paletteEnabled&e.code; to

+      &s.code;TRUE&e.code;.

+

+    </quote>

+

+    &s.code;void disablePalette(vgaHWPtr hwp)&e.code;

+    <quote><p>

+      Set the palette address source bit in the Attribute Controller

+      index register and set &s.code;hwp-&gt;paletteEnabled&e.code; to

+      &s.code;FALSE&e.code;.

+

+    </quote>

+

+    &s.code;void writeDacMask(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to the DAC Mask register.

+

+    </quote>

+

+    &s.code;CARD8 readDacMask(vgaHWptr hwp)&e.code;

+    <quote><p>

+      Return the value read from the DAC Mask register.

+

+    </quote>

+

+    &s.code;void writeDacReadAddress(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to the DAC Read Address register.

+

+    </quote>

+

+    &s.code;void writeDacWriteAddress(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to the DAC Write Address register.

+

+    </quote>

+

+    &s.code;void writeDacData(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to the DAC Data register.

+

+    </quote>

+

+    &s.code;CARD8 readDacData(vgaHWptr hwp)&e.code;

+    <quote><p>

+      Return the value read from the DAC Data register.

+

+    </quote>

+

+    &s.code;CARD8 readEnable(vgaHWptr hwp)&e.code;

+    <quote><p>

+      Return the value read from the VGA Enable register.  (Note: This

+      function is present in XFree86 4.1.0 and later.)

+

+    </quote>

+

+    &s.code;void writeEnable(vgaHWPtr hwp, CARD8 value)&e.code;

+    <quote><p>

+      Write &s.code;value&e.code; to the VGA Enable register.  (Note: This

+      function is present in XFree86 4.1.0 and later.)

+

+    </quote>

+  </quote>

+

+<sect>Some notes about writing a driver<label id="sample">

+<p>

+

+<em>NOTE: some parts of this are not up to date</em>

+

+The following is an outline for writing a basic unaccelerated driver

+for a PCI video card with a linear mapped framebuffer, and which has a

+VGA core.  It is includes some general information that is relevant to

+most drivers (even those which don't fit that basic description).

+

+The information here is based on the initial conversion of the Matrox

+Millennium driver to the ``new design''.  For a fleshing out and sample

+implementation of some of the bits outlined here, refer to that driver.

+Note that this is an example only.  The approach used here will not be

+appropriate for all drivers.

+

+Each driver must reserve a unique driver name, and a string that is used

+to prefix all of its externally visible symbols.  This is to avoid name

+space clashes when loading multiple drivers.  The examples here are for

+the ``ZZZ'' driver, which uses the ``ZZZ'' or ``zzz'' prefix for its externally

+visible symbols.

+

+

+<sect1>Include files

+<p>

+

+  All drivers normally include the following headers:

+  <quote>

+    &s.code;"xf86.h"&nl;

+    "xf86_OSproc.h"&nl;

+    "xf86_ansic.h"&nl;

+    "xf86Resources.h"&e.code;

+  </quote>

+  Wherever inb/outb (and related things) are used the following should be

+  included:

+  <quote>

+    &s.code;"compiler.h"&e.code;

+  </quote>

+  Note: in drivers, this must be included after &s.code;"xf86_ansic.h"&e.code;.

+

+  Drivers that need to access PCI vendor/device definitions need this:

+  <quote>

+    &s.code;"xf86PciInfo.h"&e.code;

+  </quote>

+

+  Drivers that need to access the PCI config space need this:

+  <quote>

+    &s.code;"xf86Pci.h"&e.code;

+  </quote>

+

+  Drivers using the mi banking wrapper need:

+

+  <quote>

+    &s.code;"mibank.h"&e.code;

+  </quote>

+

+  Drivers that initialise a SW cursor need this:

+  <quote>

+    &s.code;"mipointer.h"&e.code;

+  </quote>

+

+  All drivers implementing backing store need this:

+  <quote>

+    &s.code;"mibstore.h"&e.code;

+  </quote>

+

+  All drivers using the mi colourmap code need this:

+  <quote>

+    &s.code;"micmap.h"&e.code;

+  </quote>

+

+  If a driver uses the vgahw module, it needs this:

+  <quote>

+    &s.code;"vgaHW.h"&e.code;

+  </quote>

+

+  Drivers supporting VGA or Hercules monochrome screens need:

+  <quote>

+    &s.code;"xf1bpp.h"&e.code;

+  </quote>

+

+  Drivers supporting VGA or EGC 16-colour screens need:

+  <quote>

+    &s.code;"xf4bpp.h"&e.code;

+  </quote>

+

+  Drivers using cfb need:

+  <quote>

+    &s.code;#define PSZ 8&nl;

+    #include "cfb.h"&nl;

+    #undef PSZ&e.code;

+  </quote>

+

+  Drivers supporting bpp 16, 24 or 32 with cfb need one or more of:

+  <quote>

+    &s.code;"cfb16.h"&nl;

+    "cfb24.h"&nl;

+    "cfb32.h"&e.code;

+  </quote>

+

+  The driver's own header file:

+  <quote>

+    &s.code;"zzz.h"&e.code;

+  </quote>

+

+  Drivers must NOT include the following:

+

+ <quote>

+    &s.code;"xf86Priv.h"&nl;

+    "xf86Privstr.h"&nl;

+    "xf86_libc.h"&nl;

+    "xf86_OSlib.h"&nl;

+    "Xos.h"&e.code;&nl;

+    any OS header

+ </quote>

+

+

+<sect1>Data structures and initialisation

+<p>

+

+<itemize>

+  <item>The following macros should be defined:

+    <code>

+#define VERSION <version-as-an-int>

+#define ZZZ_NAME "ZZZ"         /* the name used to prefix messages */

+#define ZZZ_DRIVER_NAME "zzz"  /* the driver name as used in config file */

+#define ZZZ_MAJOR_VERSION <int>

+#define ZZZ_MINOR_VERSION <int>

+#define ZZZ_PATCHLEVEL    <int>

+    </code>

+<p>

+    NOTE: &s.code;ZZZ_DRIVER_NAME&e.code; should match the name of the

+    driver module without things like the "lib" prefix, the "_drv" suffix

+    or filename extensions.

+<p>

+

+  <item>A DriverRec must be defined, which includes the functions required

+    at the pre-probe phase.  The name of this DriverRec must be an

+    upper-case version of ZZZ_DRIVER_NAME (for the purposes of static

+    linking).

+<p>

+    <code>

+DriverRec ZZZ = {

+    VERSION,

+    ZZZ_DRIVER_NAME,

+    ZZZIdentify,

+    ZZZProbe,

+    ZZZAvailableOptions,

+    NULL,

+    0

+};

+    </code>

+

+  <item>Define list of supported chips and their matching ID:

+<p>

+    <code>

+static SymTabRec ZZZChipsets[] = {

+    { PCI_CHIP_ZZZ1234, "zzz1234a" },

+    { PCI_CHIP_ZZZ5678, "zzz5678a" },

+    { -1,               NULL }

+};

+    </code>

+<p>

+    The token field may be any integer value that the driver may use to

+    uniquely identify the supported chipsets.  For drivers that support

+    only PCI devices using the PCI device IDs might be a natural choice,

+    but this isn't mandatory.  For drivers that support both PCI and other

+    devices (like ISA), some other ID should probably used.  When other

+    IDs are used as the tokens it is recommended that the names be

+    defined as an &s.code;enum&e.code; type.

+<p>

+  <item>If the driver uses the &s.code;xf86MatchPciInstances(&e.code;)

+    helper (recommended for drivers that support PCI cards) a list that

+    maps PCI IDs to chip IDs and fixed resources must be defined:

+<p>

+    <code>

+static PciChipsets ZZZPciChipsets[] = {

+    { PCI_CHIP_ZZZ1234, PCI_CHIP_ZZZ1234, RES_SHARED_VGA },

+    { PCI_CHIP_ZZZ5678, PCI_CHIP_ZZZ5678, RES_SHARED_VGA },

+    { -1,               -1,               RES_UNDEFINED }

+}

+    </code>

+<p>

+  <item>Define the &s.code;XF86ModuleVersionInfo&e.code; struct for the

+    driver.  This is required for the dynamically loaded version:

+<p>

+    <code>

+static XF86ModuleVersionInfo zzzVersRec =

+{

+    "zzz",

+    MODULEVENDORSTRING,

+    MODINFOSTRING1,

+    MODINFOSTRING2,

+    XF86_VERSION_CURRENT,

+    ZZZ_MAJOR_VERSION, ZZZ_MINOR_VERSION, ZZZ_PATCHLEVEL,

+    ABI_CLASS_VIDEODRV,

+    ABI_VIDEODRV_VERSION,

+    MOD_CLASS_VIDEODRV,

+    {0,0,0,0}

+};

+    </code>

+<p>

+  <item>Define a data structure to hold the driver's screen-specific data.

+    This must be used instead of global variables.  This would be defined

+    in the &s.code;"zzz.h"&e.code; file, something like:

+<p>

+    <code>

+typedef struct {

+    type1  field1;

+    type2  field2;

+    int    fooHack;

+    Bool   pciRetry;

+    Bool   noAccel;

+    Bool   hwCursor;

+    CloseScreenProcPtr CloseScreen;

+    OptionInfoPtr Options;

+    ...

+} ZZZRec, *ZZZPtr;

+    </code>

+<p>

+  <item>Define the list of config file Options that the driver accepts.  For

+    consistency between drivers those in the list of ``standard'' options

+    should be used where appropriate before inventing new options.

+<p>

+    <code>

+typedef enum {

+    OPTION_FOO_HACK,

+    OPTION_PCI_RETRY,

+    OPTION_HW_CURSOR,

+    OPTION_NOACCEL

+} ZZZOpts;

+

+static const OptionInfoRec ZZZOptions[] = {

+  { OPTION_FOO_HACK,  "FooHack",   OPTV_INTEGER, {0}, FALSE },

+  { OPTION_PCI_RETRY, "PciRetry",  OPTV_BOOLEAN, {0}, FALSE },

+  { OPTION_HW_CURSOR, "HWcursor",  OPTV_BOOLEAN, {0}, FALSE },

+  { OPTION_NOACCEL,   "NoAccel",   OPTV_BOOLEAN, {0}, FALSE },

+  { -1,               NULL,        OPTV_NONE,    {0}, FALSE }

+};

+    </code>

+<p>

+</itemize>

+

+<sect1>Functions

+<p>

+

+

+<sect2>SetupProc

+<p>

+

+    For dynamically loaded modules, a &s.code;ModuleData&e.code;

+    variable is required.  It is should be the name of the driver

+    prepended to "ModuleData".  A &s.code;Setup()&e.code; function is

+    also required, which calls &s.code;xf86AddDriver()&e.code; to add

+    the driver to the main list of drivers.

+

+    <code>

+static MODULESETUPPROTO(zzzSetup);

+

+XF86ModuleData zzzModuleData = { &amp;zzzVersRec, zzzSetup, NULL };

+

+static pointer

+zzzSetup(pointer module, pointer opts, int *errmaj, int *errmin)

+{

+    static Bool setupDone = FALSE;

+

+    /* This module should be loaded only once, but check to be sure. */

+

+    if (!setupDone) {

+        /*

+         * Modules that this driver always requires may be loaded

+         * here  by calling LoadSubModule().

+         */

+

+        setupDone = TRUE;

+        xf86AddDriver(&amp;MGA, module, 0);

+

+        /*

+         * The return value must be non-NULL on success even though

+         * there is no TearDownProc.

+         */

+        return (pointer)1;

+    } else {

+        if (errmaj) *errmaj = LDR_ONCEONLY;

+        return NULL;

+    }

+}

+    </code>

+

+<sect2>GetRec, FreeRec

+<p>

+

+    A function is usually required to allocate the driver's

+    screen-specific data structure and hook it into the

+    &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; field.

+    The &s.code;ScrnInfoRec&e.code;'s &s.code;driverPrivate&e.code; is

+    initialised to &s.code;NULL&e.code;, so it is easy to check if the

+    initialisation has already been done.  After allocating it, initialise

+    the fields.  By using &s.code;xnfcalloc()&e.code; to do the allocation

+    it is zeroed, and if the allocation fails the server exits.

+<p>

+    NOTE:

+    When allocating structures from inside the driver which are defined

+    on the common level it is important to initialize the structure to

+    zero.

+    Only this guarantees that the server remains source compatible to

+    future changes in common level structures.

+

+    <code>

+static Bool

+ZZZGetRec(ScrnInfoPtr pScrn)

+{

+    if (pScrn->driverPrivate != NULL)

+        return TRUE;

+    pScrn->driverPrivate = xnfcalloc(sizeof(ZZZRec), 1);

+    /* Initialise as required */

+    ...

+    return TRUE;

+}

+    </code>

+

+    Define a macro in &s.code;"zzz.h"&e.code; which gets a pointer to

+    the &s.code;ZZZRec&e.code; when given &s.code;pScrn&e.code;:

+

+    <code>

+#define ZZZPTR(p) ((ZZZPtr)((p)->driverPrivate))

+    </code>

+

+    Define a function to free the above, setting it to &s.code;NULL&e.code;

+    once it has been freed:

+

+    <code>

+static void

+ZZZFreeRec(ScrnInfoPtr pScrn)

+{

+    if (pScrn->driverPrivate == NULL)

+        return;

+    xfree(pScrn->driverPrivate);

+    pScrn->driverPrivate = NULL;

+}

+    </code>

+

+<sect2>Identify

+<p>

+

+    Define the &s.code;Identify()&e.code; function.  It is run before

+    the Probe, and typically prints out an identifying message, which

+    might include the chipsets it supports.  This function is mandatory:

+

+    <code>

+static void

+ZZZIdentify(int flags)

+{

+    xf86PrintChipsets(ZZZ_NAME, "driver for ZZZ Tech chipsets",

+                      ZZZChipsets);

+}

+    </code>

+

+<sect2>Probe

+<p>

+

+    Define the &s.code;Probe()&e.code; function.  The purpose of this

+    is to find all instances of the hardware that the driver supports,

+    and for the ones not already claimed by another driver, claim the

+    slot, and allocate a &s.code;ScrnInfoRec&e.code;.  This should be

+    a minimal probe, and it should under no circumstances leave the

+    state of the hardware changed.  Because a device is found, don't

+    assume that it will be used.  Don't do any initialisations other

+    than the required &s.code;ScrnInfoRec&e.code; initialisations.

+    Don't allocate any new data structures.

+

+    This function is mandatory.

+

+    NOTE: The &s.code;xf86DrvMsg()&e.code; functions cannot be used from

+    the Probe.

+

+    <code>

+static Bool

+ZZZProbe(DriverPtr drv, int flags)

+{

+    Bool foundScreen = FALSE;

+    int numDevSections, numUsed;

+    GDevPtr *devSections;

+    int *usedChips;

+    int i;

+

+    /*

+     * Find the config file Device sections that match this

+     * driver, and return if there are none.

+     */

+    if ((numDevSections = xf86MatchDevice(ZZZ_DRIVER_NAME,

+                                          &amp;devSections)) <= 0) {

+        return FALSE;

+    }

+

+    /*

+     * Since this is a PCI card, "probing" just amounts to checking

+     * the PCI data that the server has already collected.  If there

+     * is none, return.

+     *

+     * Although the config file is allowed to override things, it

+     * is reasonable to not allow it to override the detection

+     * of no PCI video cards.

+     *

+     * The provided xf86MatchPciInstances() helper takes care of

+     * the details.

+     */

+    /* test if PCI bus present */

+    if (xf86GetPciVideoInfo()) {

+

+        numUsed = xf86MatchPciInstances(ZZZ_NAME, PCI_VENDOR_ZZZ,

+                            ZZZChipsets, ZZZPciChipsets, devSections,

+                            numDevSections, drv, &amp;usedChips);

+

+        for (i = 0; i < numUsed; i++) {

+            ScrnInfoPtr pScrn = NULL;

+            if ((pScrn = xf86ConfigPciEntity(pScrn, flags, usedChips[i],

+                                             ZZZPciChipsets, NULL, NULL,

+                                             NULL, NULL, NULL))) {

+               /* Allocate a ScrnInfoRec */

+               pScrn->driverVersion = VERSION;

+               pScrn->driverName    = ZZZ_DRIVER_NAME;

+               pScrn->name          = ZZZ_NAME;

+               pScrn->Probe         = ZZZProbe;

+               pScrn->PreInit       = ZZZPreInit;

+               pScrn->ScreenInit    = ZZZScreenInit;

+               pScrn->SwitchMode    = ZZZSwitchMode;

+               pScrn->AdjustFrame   = ZZZAdjustFrame;

+               pScrn->EnterVT       = ZZZEnterVT;

+               pScrn->LeaveVT       = ZZZLeaveVT;

+               pScrn->FreeScreen    = ZZZFreeScreen;

+               pScrn->ValidMode     = ZZZValidMode;

+               foundScreen = TRUE;

+               /* add screen to entity */

+           }

+        }

+        xfree(usedChips);

+    }

+

+#ifdef HAS_ISA_DEVS

+    /*

+     * If the driver supports ISA hardware, the following block

+     * can be included too.

+     */

+    numUsed = xf86MatchIsaInstances(ZZZ_NAME, ZZZChipsets,

+                             ZZZIsaChipsets, drv, ZZZFindIsaDevice,

+                             devSections, numDevSections, &amp;usedChips);

+    for (i = 0; i < numUsed; i++) {

+        ScrnInfoPtr pScrn = NULL;

+	if ((pScrn = xf86ConfigIsaEntity(pScrn, flags, usedChips[i],

+					 ZZZIsaChipsets, NULL, NULL, NULL,

+					 NULL, NULL))) {

+            pScrn->driverVersion = VERSION;

+            pScrn->driverName    = ZZZ_DRIVER_NAME;

+            pScrn->name          = ZZZ_NAME;

+            pScrn->Probe         = ZZZProbe;

+            pScrn->PreInit       = ZZZPreInit;

+            pScrn->ScreenInit    = ZZZScreenInit;

+            pScrn->SwitchMode    = ZZZSwitchMode;

+            pScrn->AdjustFrame   = ZZZAdjustFrame;

+            pScrn->EnterVT       = ZZZEnterVT;

+            pScrn->LeaveVT       = ZZZLeaveVT;

+            pScrn->FreeScreen    = ZZZFreeScreen;

+            pScrn->ValidMode     = ZZZValidMode;

+            foundScreen = TRUE;

+        }

+    }

+    xfree(usedChips);

+#endif /* HAS_ISA_DEVS */

+

+    xfree(devSections);

+    return foundScreen;

+    </code>

+

+<sect2>AvailableOptions

+<p>

+

+    Define the &s.code;AvailableOptions()&e.code; function. The purpose

+    of this is to return the available driver options back to the

+    -configure option, so that an xorg.conf file can be built and the

+    user can see which options are available for them to use.

+

+<sect2>PreInit

+<p>

+

+    Define the &s.code;PreInit()&e.code; function.  The purpose of

+    this is to find all the information required to determine if the

+    configuration is usable, and to initialise those parts of the

+    &s.code;ScrnInfoRec&e.code; that can be set once at the beginning

+    of the first server generation.  The information should be found in

+    the least intrusive way possible.

+

+    This function is mandatory.

+

+    NOTES:

+    <enum>

+      <item>The &s.code;PreInit()&e.code; function is only called once

+	 during the life of the X server (at the start of the first

+	 generation).

+

+      <item>Data allocated here must be of the type that persists for

+	 the life of the X server.  This means that data that hooks into

+	 the &s.code;ScrnInfoRec&e.code;'s &s.code;privates&e.code;

+	 field should be allocated here, but data that hooks into the

+	 &s.code;ScreenRec&e.code;'s &s.code;devPrivates&e.code; field

+	 should not be allocated here.  The &s.code;driverPrivate&e.code;

+	 field should also be allocated here.

+

+      <item>Although the &s.code;ScrnInfoRec&e.code; has been allocated

+	 before this function is called, the &s.code;ScreenRec&e.code;

+	 has not been allocated.  That means that things requiring it

+	 cannot be used in this function.

+

+      <item>Very little of the &s.code;ScrnInfoRec&e.code; has been

+	 initialised when this function is called.  It is important to

+	 get the order of doing things right in this function.

+

+    </enum>

+

+    <code>

+static Bool

+ZZZPreInit(ScrnInfoPtr pScrn, int flags)

+{

+    /* Fill in the monitor field */

+    pScrn->monitor = pScrn->confScreen->monitor;

+

+    /*

+     * If using the vgahw module, it will typically be loaded

+     * here by calling xf86LoadSubModule(pScrn, "vgahw");

+     */

+

+    /*

+     * Set the depth/bpp.  Use the globally preferred depth/bpp.  If the

+     * driver has special default depth/bpp requirements, the defaults should

+     * be specified here explicitly.

+     * We support both 24bpp and 32bpp framebuffer layouts.

+     * This sets pScrn->display also.

+     */

+    if (!xf86SetDepthBpp(pScrn, 0, 0, 0,

+                         Support24bppFb | Support32bppFb)) {

+        return FALSE;

+    } else {

+        if (depth/bpp isn't one we support) {

+            print error message;

+            return FALSE;

+        }

+    }

+    /* Print out the depth/bpp that was set */

+    xf86PrintDepthBpp(pScrn);

+

+    /* Set bits per RGB for 8bpp */

+    if (pScrn->depth <= 8) {

+        /* Take into account a dac_6_bit option here */

+        pScrn->rgbBits = 6 or 8;

+    }

+

+    /*

+     * xf86SetWeight() and xf86SetDefaultVisual() must be called

+     * after pScrn->display is initialised.

+     */

+

+    /* Set weight/mask/offset for depth > 8 */

+    if (pScrn->depth > 8) {

+        if (!xf86SetWeight(pScrn, defaultWeight, defaultMask)) {

+            return FALSE;

+        } else {

+            if (weight isn't one we support) {

+                print error message;

+                return FALSE;

+            }

+        }

+    }

+

+    /* Set the default visual. */

+    if (!xf86SetDefaultVisual(pScrn, -1)) {

+        return FALSE;

+    } else {

+        if (visual isn't one we support) {

+            print error message;

+            return FALSE;

+        }

+    }

+

+    /* If the driver supports gamma correction, set the gamma. */

+    if (!xf86SetGamma(pScrn, default_gamma)) {

+        return FALSE;

+    }

+

+    /* This driver uses a programmable clock */

+    pScrn->progClock = TRUE;

+

+    /* Allocate the ZZZRec driverPrivate */

+    if (!ZZZGetRec(pScrn)) {

+        return FALSE;

+    }

+

+    pZzz = ZZZPTR(pScrn);

+

+    /* Collect all of the option flags (fill in pScrn->options) */

+    xf86CollectOptions(pScrn, NULL);

+

+    /*

+     * Process the options based on the information in ZZZOptions.

+     * The results are written to pZzz->Options.  If all of the options

+     * processing is done within this function a local variable "options"

+     * can be used instead of pZzz->Options.

+     */

+    if (!(pZzz->Options = xalloc(sizeof(ZZZOptions))))

+        return FALSE;

+    (void)memcpy(pZzz->Options, ZZZOptions, sizeof(ZZZOptions));

+    xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pZzz->Options);

+

+    /*

+     * Set various fields of ScrnInfoRec and/or ZZZRec based on

+     * the options found.

+     */

+    from = X_DEFAULT;

+    pZzz->hwCursor = FALSE;

+    if (xf86IsOptionSet(pZzz->Options, OPTION_HW_CURSOR)) {

+        from = X_CONFIG;

+        pZzz->hwCursor = TRUE;

+    }

+    xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n",

+               pZzz->hwCursor ? "HW" : "SW");

+    if (xf86IsOptionSet(pZzz->Options, OPTION_NOACCEL)) {

+        pZzz->noAccel = TRUE;

+        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,

+                   "Acceleration disabled\n");

+    } else {

+        pZzz->noAccel = FALSE;

+    }

+    if (xf86IsOptionSet(pZzz->Options, OPTION_PCI_RETRY)) {

+        pZzz->UsePCIRetry = TRUE;

+        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "PCI retry enabled\n");

+    }

+    pZzz->fooHack = 0;

+    if (xf86GetOptValInteger(pZzz->Options, OPTION_FOO_HACK,

+                             &amp;pZzz->fooHack)) {

+        xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Foo Hack set to %d\n",

+                   pZzz->fooHack);

+    }

+

+    /*

+     * Find the PCI slot(s) that this screen claimed in the probe.

+     * In this case, exactly one is expected, so complain otherwise.

+     * Note in this case we're not interested in the card types so

+     * that parameter is set to NULL.

+     */

+    if ((i = xf86GetPciInfoForScreen(pScrn->scrnIndex, &amp;pciList, NULL))

+        != 1) {

+        print error message;

+        ZZZFreeRec(pScrn);

+        if (i > 0)

+            xfree(pciList);

+        return FALSE;

+    }

+    /* Note that pciList should be freed below when no longer needed */

+

+    /*

+     * Determine the chipset, allowing config file chipset and

+     * chipid values to override the probed information.  The config

+     * chipset value has precedence over its chipid value if both

+     * are present.

+     *

+     * It isn't necessary to fill in pScrn->chipset if the driver

+     * keeps track of the chipset in its ZZZRec.

+     */

+

+    ...

+

+    /*

+     * Determine video memory, fb base address, I/O addresses, etc,

+     * allowing the config file to override probed values.

+     *

+     * Set the appropriate pScrn fields (videoRam is probably the

+     * most important one that other code might require), and

+     * print out the settings.

+     */

+

+    ...

+

+    /* Initialise a clockRanges list. */

+

+    ...

+

+    /* Set any other chipset specific things in the ZZZRec */

+

+    ...

+

+    /* Select valid modes from those available */

+

+    i = xf86ValidateModes(pScrn, pScrn->monitor->Modes,

+                          pScrn->display->modes, clockRanges,

+                          NULL, minPitch, maxPitch, rounding,

+                          minHeight, maxHeight,

+                          pScrn->display->virtualX,

+                          pScrn->display->virtualY,

+                          pScrn->videoRam * 1024,

+                          LOOKUP_BEST_REFRESH);

+    if (i == -1) {

+        ZZZFreeRec(pScrn);

+        return FALSE;

+    }

+

+    /* Prune the modes marked as invalid */

+

+    xf86PruneDriverModes(pScrn);

+

+    /* If no valid modes, return */

+

+    if (i == 0 || pScrn->modes == NULL) {

+        print error message;

+        ZZZFreeRec(pScrn);

+        return FALSE;

+    }

+

+    /*

+     * Initialise the CRTC fields for the modes.  This driver expects

+     * vertical values to be halved for interlaced modes.

+     */

+    xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V);

+

+    /* Set the current mode to the first in the list. */

+    pScrn->currentMode = pScrn->modes;

+

+    /* Print the list of modes being used. */

+    xf86PrintModes(pScrn);

+

+    /* Set the DPI */

+    xf86SetDpi(pScrn, 0, 0);

+

+    /* Load bpp-specific modules */

+    switch (pScrn->bitsPerPixel) {

+    case 1:

+        mod = "xf1bpp";

+        break;

+    case 4:

+        mod = "xf4bpp";

+        break;

+    case 8:

+        mod = "cfb";

+        break;

+    case 16:

+        mod = "cfb16";

+        break;

+    case 24:

+        mod = "cfb24";

+        break;

+    case 32:

+        mod = "cfb32";

+        break;

+    }

+    if (mod && !xf86LoadSubModule(pScrn, mod))

+        ZZZFreeRec(pScrn);

+        return FALSE;

+

+    /* Load XAA if needed */

+    if (!pZzz->noAccel || pZzz->hwCursor)

+        if (!xf86LoadSubModule(pScrn, "xaa")) {

+            ZZZFreeRec(pScrn);

+            return FALSE;

+        }

+

+    /* Done */

+    return TRUE;

+}

+    </code>

+

+<sect2>MapMem, UnmapMem

+<p>

+

+    Define functions to map and unmap the video memory and any other

+    memory apertures required.  These functions are not mandatory, but

+    it is often useful to have such functions.

+

+    <code>

+static Bool

+ZZZMapMem(ScrnInfoPtr pScrn)

+{

+    /* Call xf86MapPciMem() to map each PCI memory area */

+    ...

+    return TRUE or FALSE;

+}

+

+static Bool

+ZZZUnmapMem(ScrnInfoPtr pScrn)

+{

+    /* Call xf86UnMapVidMem() to unmap each memory area */

+    ...

+    return TRUE or FALSE;

+}

+    </code>

+

+<sect2>Save, Restore

+<p>

+

+    Define functions to save and restore the original video state.  These

+    functions are not mandatory, but are often useful.

+

+    <code>

+static void

+ZZZSave(ScrnInfoPtr pScrn)

+{

+    /*

+     * Save state into per-screen data structures.

+     * If using the vgahw module, vgaHWSave will typically be

+     * called here.

+     */

+    ...

+}

+

+static void

+ZZZRestore(ScrnInfoPtr pScrn)

+{

+    /*

+     * Restore state from per-screen data structures.

+     * If using the vgahw module, vgaHWRestore will typically be

+     * called here.

+     */

+    ...

+}

+    </code>

+

+<sect2>ModeInit

+<p>

+

+    Define a function to initialise a new video mode.  This function isn't

+    mandatory, but is often useful.

+

+    <code>

+static Bool

+ZZZModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)

+{

+    /*

+     * Program a video mode.  If using the vgahw module,

+     * vgaHWInit and vgaRestore will typically be called here.

+     * Once up to the point where there can't be a failure

+     * set pScrn->vtSema to TRUE.

+     */

+    ...

+}

+    </code>

+

+<sect2>ScreenInit

+<p>

+

+    Define the &s.code;ScreenInit()&e.code; function.  This is called

+    at the start of each server generation, and should fill in as much

+    of the &s.code;ScreenRec&e.code; as possible as well as any other

+    data that is initialised once per generation.  It should initialise

+    the framebuffer layers it is using, and initialise the initial video

+    mode.

+

+    This function is mandatory.

+

+    NOTE: The &s.code;ScreenRec&e.code; (&s.code;pScreen&e.code;) is

+	  passed to this driver, but it and the

+	  &s.code;ScrnInfoRecs&e.code; are not yet hooked into each

+	  other.  This means that in this function, and functions it

+	  calls, one cannot be found from the other.

+

+    <code>

+static Bool

+ZZZScreenInit(int scrnIndex, ScreenPtr pScreen, int argc, char **argv)

+{

+    /* Get the ScrnInfoRec */

+    pScrn = xf86Screens[pScreen->myNum];

+

+    /*

+     * If using the vgahw module, its data structures and related

+     * things are typically initialised/mapped here.

+     */

+

+    /* Save the current video state */

+    ZZZSave(pScrn);

+

+    /* Initialise the first mode */

+    ZZZModeInit(pScrn, pScrn->currentMode);

+

+    /* Set the viewport if supported */

+

+    ZZZAdjustFrame(scrnIndex, pScrn->frameX0, pScrn->frameY0, 0);

+

+    /*

+     * Setup the screen's visuals, and initialise the framebuffer

+     * code.

+     */

+

+    /* Reset the visual list */

+    miClearVisualTypes();

+

+    /*

+     * Setup the visuals supported.  This driver only supports

+     * TrueColor for bpp > 8, so the default set of visuals isn't

+     * acceptable.  To deal with this, call miSetVisualTypes with

+     * the appropriate visual mask.

+     */

+

+    if (pScrn->bitsPerPixel > 8) {

+        if (!miSetVisualTypes(pScrn->depth, TrueColorMask,

+                              pScrn->rgbBits, pScrn->defaultVisual))

+            return FALSE;

+    } else {

+        if (!miSetVisualTypes(pScrn->depth,

+                              miGetDefaultVisualMask(pScrn->depth),

+                              pScrn->rgbBits, pScrn->defaultVisual))

+            return FALSE;

+    }

+

+    /*

+     * Initialise the framebuffer.

+     */

+

+    switch (pScrn->bitsPerPixel) {

+    case 1:

+        ret = xf1bppScreenInit(pScreen, FbBase,

+                               pScrn->virtualX, pScrn->virtualY,

+                               pScrn->xDpi, pScrn->yDpi,

+                               pScrn->displayWidth);

+        break;

+    case 4:

+        ret = xf4bppScreenInit(pScreen, FbBase,

+                               pScrn->virtualX, pScrn->virtualY,

+                               pScrn->xDpi, pScrn->yDpi,

+                               pScrn->displayWidth);

+        break;

+    case 8:

+        ret = cfbScreenInit(pScreen, FbBase,

+                            pScrn->virtualX, pScrn->virtualY,

+                            pScrn->xDpi, pScrn->yDpi,

+                            pScrn->displayWidth);

+        break;

+    case 16:

+        ret = cfb16ScreenInit(pScreen, FbBase,

+                              pScrn->virtualX, pScrn->virtualY,

+                              pScrn->xDpi, pScrn->yDpi,

+                              pScrn->displayWidth);

+        break;

+    case 24:

+        ret = cfb24ScreenInit(pScreen, FbBase,

+                              pScrn->virtualX, pScrn->virtualY,

+                              pScrn->xDpi, pScrn->yDpi,

+                              pScrn->displayWidth);

+        break;

+    case 32:

+        ret = cfb32ScreenInit(pScreen, FbBase,

+                              pScrn->virtualX, pScrn->virtualY,

+                              pScrn->xDpi, pScrn->yDpi,

+                              pScrn->displayWidth);

+        break;

+    default:

+        print a message about an internal error;

+        ret = FALSE;

+        break;

+    }

+

+    if (!ret)

+        return FALSE;

+

+    /* Override the default mask/offset settings */

+    if (pScrn->bitsPerPixel > 8) {

+        for (i = 0, visual = pScreen->visuals;

+             i < pScreen->numVisuals; i++, visual++) {

+            if ((visual->class | DynamicClass) == DirectColor) {

+                visual->offsetRed = pScrn->offset.red;

+                visual->offsetGreen = pScrn->offset.green;

+                visual->offsetBlue = pScrn->offset.blue;

+                visual->redMask = pScrn->mask.red;

+                visual->greenMask = pScrn->mask.green;

+                visual->blueMask = pScrn->mask.blue;

+            }

+        }

+    }

+

+    /*

+     * If banking is needed, initialise an miBankInfoRec (defined in

+     * "mibank.h"), and call miInitializeBanking().

+     */

+    if (!miInitializeBanking(pScreen, pScrn->virtualX, pScrn->virtualY,

+                                     pScrn->displayWidth, pBankInfo))

+        return FALSE;

+

+    /*

+     * If backing store is to be supported (as is usually the case),

+     * initialise it.

+     */

+    miInitializeBackingStore(pScreen);

+

+    /*

+     * Set initial black & white colourmap indices.

+     */

+    xf86SetBlackWhitePixels(pScreen);

+

+    /*

+     * Install colourmap functions.  If using the vgahw module,

+     * vgaHandleColormaps would usually be called here.

+     */

+

+    ...

+

+    /*

+     * Initialise cursor functions.  This example is for the mi

+     * software cursor.

+     */

+    miDCInitialize(pScreen, xf86GetPointerScreenFuncs());

+

+    /* Initialise the default colourmap */

+    switch (pScrn->depth) {

+    case 1:

+        if (!xf1bppCreateDefColormap(pScreen))

+            return FALSE;

+        break;

+    case 4:

+        if (!xf4bppCreateDefColormap(pScreen))

+            return FALSE;

+        break;

+    default:

+        if (!cfbCreateDefColormap(pScreen))

+            return FALSE;

+        break;

+    }

+

+    /*

+     * Wrap the CloseScreen vector and set SaveScreen.

+     */

+    ZZZPTR(pScrn)->CloseScreen = pScreen->CloseScreen;

+    pScreen->CloseScreen = ZZZCloseScreen;

+    pScreen->SaveScreen = ZZZSaveScreen;

+

+    /* Report any unused options (only for the first generation) */

+    if (serverGeneration == 1) {

+        xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options);

+    }

+

+    /* Done */

+    return TRUE;

+}

+    </code>

+

+

+<sect2>SwitchMode

+<p>

+

+    Define the &s.code;SwitchMode()&e.code; function if mode switching

+    is supported by the driver.

+

+    <code>

+static Bool

+ZZZSwitchMode(int scrnIndex, DisplayModePtr mode, int flags)

+{

+    return ZZZModeInit(xf86Screens[scrnIndex], mode);

+}

+    </code>

+

+

+<sect2>AdjustFrame

+<p>

+

+    Define the &s.code;AdjustFrame()&e.code; function if the driver

+    supports this.

+

+    <code>

+static void

+ZZZAdjustFrame(int scrnIndex, int x, int y, int flags)

+{

+    /* Adjust the viewport */

+}

+    </code>

+

+

+<sect2>EnterVT, LeaveVT

+<p>

+

+    Define the &s.code;EnterVT()&e.code; and &s.code;LeaveVT()&e.code;

+    functions.

+

+    These functions are mandatory.

+

+    <code>

+static Bool

+ZZZEnterVT(int scrnIndex, int flags)

+{

+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];

+    return ZZZModeInit(pScrn, pScrn->currentMode);

+}

+

+static void

+ZZZLeaveVT(int scrnIndex, int flags)

+{

+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];

+    ZZZRestore(pScrn);

+}

+    </code>

+

+<sect2>CloseScreen

+<p>

+

+    Define the &s.code;CloseScreen()&e.code; function:

+

+    This function is mandatory.  Note that it unwraps the previously

+    wrapped &s.code;pScreen-&gt;CloseScreen&e.code;, and finishes by

+    calling it.

+

+    <code>

+static Bool

+ZZZCloseScreen(int scrnIndex, ScreenPtr pScreen)

+{

+    ScrnInfoPtr pScrn = xf86Screens[scrnIndex];

+    if (pScrn->vtSema) {

+        ZZZRestore(pScrn);

+        ZZZUnmapMem(pScrn);

+    }

+    pScrn->vtSema = FALSE;

+    pScreen->CloseScreen = ZZZPTR(pScrn)->CloseScreen;

+    return (*pScreen->CloseScreen)(scrnIndex, pScreen);

+}

+    </code>

+

+<sect2>SaveScreen

+<p>

+

+    Define the &s.code;SaveScreen()&e.code; function (the screen

+    blanking function).  When using the vgahw module, this will typically

+    be:

+

+    <code>

+static Bool

+ZZZSaveScreen(ScreenPtr pScreen, int mode)

+{

+    return vgaHWSaveScreen(pScreen, mode);

+}

+    </code>

+

+    This function is mandatory.  Before modifying any hardware register

+    directly this function needs to make sure that the Xserver is active

+    by checking if &s.code;pScrn&e.code; is non-NULL and for

+    &s.code;pScrn->vtSema == TRUE&e.code;.

+

+<sect2>FreeScreen

+<p>

+

+    Define the &s.code;FreeScreen()&e.code; function.  This function

+    is optional.  It should be defined if the &s.code;ScrnInfoRec&e.code;

+    &s.code;driverPrivate&e.code; field is used so that it can be freed

+    when a screen is deleted by the common layer for reasons possibly

+    beyond the driver's control.  This function is not used in during

+    normal (error free) operation.  The per-generation data is freed by

+    the &s.code;CloseScreen()&e.code; function.

+

+    <code>

+static void

+ZZZFreeScreen(int scrnIndex, int flags)

+{

+    /*

+     * If the vgahw module is used vgaHWFreeHWRec() would be called

+     * here.

+     */

+    ZZZFreeRec(xf86Screens[scrnIndex]);

+}

+    </code>

+

+

+</article>

diff --git a/xorg-server/hw/xfree86/dri2/dri2ext.c b/xorg-server/hw/xfree86/dri2/dri2ext.c
index 38efc86e0..adbc9647b 100644
--- a/xorg-server/hw/xfree86/dri2/dri2ext.c
+++ b/xorg-server/hw/xfree86/dri2/dri2ext.c
@@ -160,11 +160,7 @@ DRI2InvalidateBuffersEvent(DrawablePtr pDraw, void *priv)
     xDRI2InvalidateBuffers event;

     ClientPtr client = priv;

 

-    if (client->clientGone)

-	return;

-

     event.type = DRI2EventBase + DRI2_InvalidateBuffers;

-    event.sequenceNumber = client->sequence;

     event.drawable = pDraw->id;

 

     WriteEventsToClient(client, 1, (xEvent *)&event);

@@ -366,7 +362,6 @@ DRI2SwapEvent(ClientPtr client, void *data, int type, CARD64 ust, CARD64 msc,
     DrawablePtr pDrawable = data;

 

     event.type = DRI2EventBase + DRI2_BufferSwapComplete;

-    event.sequenceNumber = client->sequence;

     event.event_type = type;

     event.drawable = pDrawable->id;

     event.ust_hi = (CARD64)ust >> 32;

diff --git a/xorg-server/hw/xquartz/applewm.c b/xorg-server/hw/xquartz/applewm.c
index b0f811750..64851e791 100644
--- a/xorg-server/hw/xquartz/applewm.c
+++ b/xorg-server/hw/xquartz/applewm.c
@@ -341,7 +341,6 @@ ProcAppleWMSelectInput (register ClientPtr client)
 void

 AppleWMSendEvent (int type, unsigned int mask, int which, int arg) {

     WMEventPtr      *pHead, pEvent;

-    ClientPtr       client;

     xAppleWMNotifyEvent se;

     int             i;

 

@@ -349,18 +348,13 @@ AppleWMSendEvent (int type, unsigned int mask, int which, int arg) {
     if (i != Success || !pHead)

         return;

     for (pEvent = *pHead; pEvent; pEvent = pEvent->next) {

-        client = pEvent->client;

-        if ((pEvent->mask & mask) == 0

-            || client == serverClient || client->clientGone)

-        {

+        if ((pEvent->mask & mask) == 0)

             continue;

-        }

         se.type = type + WMEventBase;

         se.kind = which;

         se.arg = arg;

-        se.sequenceNumber = client->sequence;

         se.time = currentTime.milliseconds;

-        WriteEventsToClient (client, 1, (xEvent *) &se);

+        WriteEventsToClient (pEvent->client, 1, (xEvent *) &se);

     }

 }

 

diff --git a/xorg-server/hw/xquartz/xpr/appledri.c b/xorg-server/hw/xquartz/xpr/appledri.c
index 87cb9016a..1fceb525c 100644
--- a/xorg-server/hw/xquartz/xpr/appledri.c
+++ b/xorg-server/hw/xquartz/xpr/appledri.c
@@ -192,22 +192,16 @@ static void surface_notify(
 {

     DRISurfaceNotifyArg *arg = _arg;

     int client_index = (int) x_cvt_vptr_to_uint(data);

-    ClientPtr client;

     xAppleDRINotifyEvent se;

 

     if (client_index < 0 || client_index >= currentMaxClients)

         return;

 

-    client = clients[client_index];

-    if (client == NULL || client == serverClient || client->clientGone)

-        return;

-

     se.type = DRIEventBase + AppleDRISurfaceNotify;

     se.kind = arg->kind;

     se.arg = arg->id;

-    se.sequenceNumber = client->sequence;

     se.time = currentTime.milliseconds;

-    WriteEventsToClient (client, 1, (xEvent *) &se);

+    WriteEventsToClient (clients[client_index], 1, (xEvent *) &se);

 }

 

 static int

diff --git a/xorg-server/hw/xwin/winconfig.c b/xorg-server/hw/xwin/winconfig.c
index c972bbcad..d09173197 100644
--- a/xorg-server/hw/xwin/winconfig.c
+++ b/xorg-server/hw/xwin/winconfig.c
@@ -673,6 +673,18 @@ winSetRealOption (pointer optlist, const char *name, double deflt)
     deflt = o.value.realnum;

   return deflt;

 }

+

+double

+winSetPercentOption (pointer optlist, const char *name, double deflt)

+{

+  OptionInfoRec o;

+

+  o.name = name;

+  o.type = OPTV_PERCENT;

+  if (ParseOptionValue (-1, optlist, &o))

+    deflt = o.value.realnum;

+  return deflt;

+}

 #endif

 

 

@@ -851,6 +863,31 @@ ParseOptionValue (int scrnIndex, pointer options, OptionInfoPtr p)
 	      p->found = FALSE;

 	    }

 	  break;

+	case OPTV_PERCENT:

+	  if (*s == '\0')

+	    {

+	      winDrvMsg (scrnIndex, X_WARNING,

+			 "Option \"%s\" requires a percent value\n",

+			 p->name);

+	      p->found = FALSE;

+	    }

+	  else

+	    {

+	       double percent = strtod (s, &end);

+

+	       if (end != s && winNameCompare (end, "%"))

+		 {

+		   p->found = TRUE;

+		   p->value.realnum = percent;

+		 }

+	       else

+		 {

+		   winDrvMsg (scrnIndex, X_WARNING,

+			      "Option \"%s\" requires a frequency value\n",

+			       p->name);

+		   p->found = FALSE;

+		 }

+	    }

 	case OPTV_FREQ:

 	  if (*s == '\0')

 	    {

diff --git a/xorg-server/hw/xwin/winconfig.h b/xorg-server/hw/xwin/winconfig.h
index 058884abc..7f533cff0 100644
--- a/xorg-server/hw/xwin/winconfig.h
+++ b/xorg-server/hw/xwin/winconfig.h
@@ -1,322 +1,324 @@
-#ifndef __WIN_CONFIG_H__
-#define __WIN_CONFIG_H__
-/*
- *Copyright (C) 1994-2000 The XFree86 Project, Inc. All Rights Reserved.
- *
- *Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- *"Software"), to deal in the Software without restriction, including
- *without limitation the rights to use, copy, modify, merge, publish,
- *distribute, sublicense, and/or sell copies of the Software, and to
- *permit persons to whom the Software is furnished to do so, subject to
- *the following conditions:
- *
- *The above copyright notice and this permission notice shall be
- *included in all copies or substantial portions of the Software.
- *
- *THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- *MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *NONINFRINGEMENT. IN NO EVENT SHALL THE XFREE86 PROJECT BE LIABLE FOR
- *ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
- *CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
- *WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- *Except as contained in this notice, the name of the XFree86 Project
- *shall not be used in advertising or otherwise to promote the sale, use
- *or other dealings in this Software without prior written authorization
- *from the XFree86 Project.
- *
- * Authors: Alexander Gottwald	
- */
-
-#include "win.h"
-#ifdef XWIN_XF86CONFIG
-#include "../xfree86/parser/xf86Parser.h"
-#endif
-
-
-/* These are taken from hw/xfree86/common/xf86str.h */
-
-typedef struct
-{
-  CARD32 red, green, blue;
-}
-rgb;
-
-
-typedef struct
-{
-  float red, green, blue;
-}
-Gamma;
-
-
-typedef struct
-{
-  char *identifier;
-  char *vendor;
-  char *board;
-  char *chipset;
-  char *ramdac;
-  char *driver;
-  struct _confscreenrec *myScreenSection;
-  Bool claimed;
-  Bool active;
-  Bool inUse;
-  int videoRam;
-  int textClockFreq;
-  pointer options;
-  int screen;			/* For multi-CRTC cards */
-}
-GDevRec, *GDevPtr;
-
-
-typedef struct
-{
-  char *identifier;
-  char *driver;
-  pointer commonOptions;
-  pointer extraOptions;
-}
-IDevRec, *IDevPtr;
-
-
-typedef struct
-{
-  int frameX0;
-  int frameY0;
-  int virtualX;
-  int virtualY;
-  int depth;
-  int fbbpp;
-  rgb weight;
-  rgb blackColour;
-  rgb whiteColour;
-  int defaultVisual;
-  char **modes;
-  pointer options;
-}
-DispRec, *DispPtr;
-
-
-typedef struct _confxvportrec
-{
-  char *identifier;
-  pointer options;
-}
-confXvPortRec, *confXvPortPtr;
-
-
-typedef struct _confxvadaptrec
-{
-  char *identifier;
-  int numports;
-  confXvPortPtr ports;
-  pointer options;
-}
-confXvAdaptorRec, *confXvAdaptorPtr;
-
-
-typedef struct _confscreenrec
-{
-  char *id;
-  int screennum;
-  int defaultdepth;
-  int defaultbpp;
-  int defaultfbbpp;
-  GDevPtr device;
-  int numdisplays;
-  DispPtr displays;
-  int numxvadaptors;
-  confXvAdaptorPtr xvadaptors;
-  pointer options;
-}
-confScreenRec, *confScreenPtr;
-
-
-typedef enum
-{
-  PosObsolete = -1,
-  PosAbsolute = 0,
-  PosRightOf,
-  PosLeftOf,
-  PosAbove,
-  PosBelow,
-  PosRelative
-}
-PositionType;
-
-
-typedef struct _screenlayoutrec
-{
-  confScreenPtr screen;
-  char *topname;
-  confScreenPtr top;
-  char *bottomname;
-  confScreenPtr bottom;
-  char *leftname;
-  confScreenPtr left;
-  char *rightname;
-  confScreenPtr right;
-  PositionType where;
-  int x;
-  int y;
-  char *refname;
-  confScreenPtr refscreen;
-}
-screenLayoutRec, *screenLayoutPtr;
-
-
-typedef struct _serverlayoutrec
-{
-  char *id;
-  screenLayoutPtr screens;
-  GDevPtr inactives;
-  IDevPtr inputs;
-  pointer options;
-}
-serverLayoutRec, *serverLayoutPtr;
-
-
-/*
- * winconfig.c
- */
-
-typedef struct
-{
-  /* Files */
-#ifdef XWIN_XF86CONFIG
-  char *configFile;
-  char *configDir;
-#endif
-  char *fontPath;
-  /* input devices - keyboard */
-#ifdef XWIN_XF86CONFIG
-  char *keyboard;
-#endif
-  char *xkbRules; 
-  char *xkbModel;
-  char *xkbLayout;
-  char *xkbVariant;
-  char *xkbOptions;
-  /* layout */
-  char *screenname;
-  /* mouse settings */
-  char *mouse;
-  Bool emulate3buttons;
-  long emulate3timeout;
-}
-WinCmdlineRec, *WinCmdlinePtr;
-
-
-extern WinCmdlineRec g_cmdline;
-#ifdef XWIN_XF86CONFIG
-extern XF86ConfigPtr g_xf86configptr;
-#endif
-extern serverLayoutRec g_winConfigLayout;
-
-
-/*
- * Function prototypes
- */
-
-Bool winReadConfigfile (void);
-Bool winConfigFiles (void);
-Bool winConfigOptions (void);
-Bool winConfigScreens (void);
-Bool winConfigKeyboard (DeviceIntPtr pDevice);
-Bool winConfigMouse (DeviceIntPtr pDevice);
-
-
-typedef struct
-{
-  double freq;
-  int units;
-}
-OptFrequency;
-
-
-typedef union
-{
-  unsigned long num;
-  char *str;
-  double realnum;
-  Bool bool;
-  OptFrequency freq;
-}
-ValueUnion;
-
-
-typedef enum
-{
-  OPTV_NONE = 0,
-  OPTV_INTEGER,
-  OPTV_STRING,			/* a non-empty string */
-  OPTV_ANYSTR,			/* Any string, including an empty one */
-  OPTV_REAL,
-  OPTV_BOOLEAN,
-  OPTV_FREQ
-}
-OptionValueType;
-
-
-typedef enum
-{
-  OPTUNITS_HZ = 1,
-  OPTUNITS_KHZ,
-  OPTUNITS_MHZ
-}
-OptFreqUnits;
-
-
-typedef struct
-{
-  int token;
-  const char *name;
-  OptionValueType type;
-  ValueUnion value;
-  Bool found;
-}
-OptionInfoRec, *OptionInfoPtr;
-
-
-/*
- * Function prototypes
- */
-
-char *winSetStrOption (pointer optlist, const char *name, char *deflt);
-int winSetBoolOption (pointer optlist, const char *name, int deflt);
-int winSetIntOption (pointer optlist, const char *name, int deflt);
-double winSetRealOption (pointer optlist, const char *name, double deflt);
-#ifdef XWIN_XF86CONFIG
-XF86OptionPtr winFindOption (XF86OptionPtr list, const char *name);
-char *winFindOptionValue (XF86OptionPtr list, const char *name);
-#endif
-int winNameCompare (const char *s1, const char *s2);
-char *winNormalizeName (const char *s);
-
-
-typedef struct
-{
-  struct
-  {
-    long leds;
-    long delay;
-    long rate;
-  }
-  keyboard;
-  XkbRMLVOSet xkb;
-  struct
-  {
-    Bool emulate3Buttons;
-    long emulate3Timeout;
-  }
-  pointer;
-}
-winInfoRec, *winInfoPtr;
-
-
-extern winInfoRec g_winInfo;
-
-#endif
+#ifndef __WIN_CONFIG_H__

+#define __WIN_CONFIG_H__

+/*

+ *Copyright (C) 1994-2000 The XFree86 Project, Inc. All Rights Reserved.

+ *

+ *Permission is hereby granted, free of charge, to any person obtaining

+ * a copy of this software and associated documentation files (the

+ *"Software"), to deal in the Software without restriction, including

+ *without limitation the rights to use, copy, modify, merge, publish,

+ *distribute, sublicense, and/or sell copies of the Software, and to

+ *permit persons to whom the Software is furnished to do so, subject to

+ *the following conditions:

+ *

+ *The above copyright notice and this permission notice shall be

+ *included in all copies or substantial portions of the Software.

+ *

+ *THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

+ *EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

+ *MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

+ *NONINFRINGEMENT. IN NO EVENT SHALL THE XFREE86 PROJECT BE LIABLE FOR

+ *ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF

+ *CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION

+ *WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

+ *

+ *Except as contained in this notice, the name of the XFree86 Project

+ *shall not be used in advertising or otherwise to promote the sale, use

+ *or other dealings in this Software without prior written authorization

+ *from the XFree86 Project.

+ *

+ * Authors: Alexander Gottwald	

+ */

+

+#include "win.h"

+#ifdef XWIN_XF86CONFIG

+#include "../xfree86/parser/xf86Parser.h"

+#endif

+

+

+/* These are taken from hw/xfree86/common/xf86str.h */

+

+typedef struct

+{

+  CARD32 red, green, blue;

+}

+rgb;

+

+

+typedef struct

+{

+  float red, green, blue;

+}

+Gamma;

+

+

+typedef struct

+{

+  char *identifier;

+  char *vendor;

+  char *board;

+  char *chipset;

+  char *ramdac;

+  char *driver;

+  struct _confscreenrec *myScreenSection;

+  Bool claimed;

+  Bool active;

+  Bool inUse;

+  int videoRam;

+  int textClockFreq;

+  pointer options;

+  int screen;			/* For multi-CRTC cards */

+}

+GDevRec, *GDevPtr;

+

+

+typedef struct

+{

+  char *identifier;

+  char *driver;

+  pointer commonOptions;

+  pointer extraOptions;

+}

+IDevRec, *IDevPtr;

+

+

+typedef struct

+{

+  int frameX0;

+  int frameY0;

+  int virtualX;

+  int virtualY;

+  int depth;

+  int fbbpp;

+  rgb weight;

+  rgb blackColour;

+  rgb whiteColour;

+  int defaultVisual;

+  char **modes;

+  pointer options;

+}

+DispRec, *DispPtr;

+

+

+typedef struct _confxvportrec

+{

+  char *identifier;

+  pointer options;

+}

+confXvPortRec, *confXvPortPtr;

+

+

+typedef struct _confxvadaptrec

+{

+  char *identifier;

+  int numports;

+  confXvPortPtr ports;

+  pointer options;

+}

+confXvAdaptorRec, *confXvAdaptorPtr;

+

+

+typedef struct _confscreenrec

+{

+  char *id;

+  int screennum;

+  int defaultdepth;

+  int defaultbpp;

+  int defaultfbbpp;

+  GDevPtr device;

+  int numdisplays;

+  DispPtr displays;

+  int numxvadaptors;

+  confXvAdaptorPtr xvadaptors;

+  pointer options;

+}

+confScreenRec, *confScreenPtr;

+

+

+typedef enum

+{

+  PosObsolete = -1,

+  PosAbsolute = 0,

+  PosRightOf,

+  PosLeftOf,

+  PosAbove,

+  PosBelow,

+  PosRelative

+}

+PositionType;

+

+

+typedef struct _screenlayoutrec

+{

+  confScreenPtr screen;

+  char *topname;

+  confScreenPtr top;

+  char *bottomname;

+  confScreenPtr bottom;

+  char *leftname;

+  confScreenPtr left;

+  char *rightname;

+  confScreenPtr right;

+  PositionType where;

+  int x;

+  int y;

+  char *refname;

+  confScreenPtr refscreen;

+}

+screenLayoutRec, *screenLayoutPtr;

+

+

+typedef struct _serverlayoutrec

+{

+  char *id;

+  screenLayoutPtr screens;

+  GDevPtr inactives;

+  IDevPtr inputs;

+  pointer options;

+}

+serverLayoutRec, *serverLayoutPtr;

+

+

+/*

+ * winconfig.c

+ */

+

+typedef struct

+{

+  /* Files */

+#ifdef XWIN_XF86CONFIG

+  char *configFile;

+  char *configDir;

+#endif

+  char *fontPath;

+  /* input devices - keyboard */

+#ifdef XWIN_XF86CONFIG

+  char *keyboard;

+#endif

+  char *xkbRules; 

+  char *xkbModel;

+  char *xkbLayout;

+  char *xkbVariant;

+  char *xkbOptions;

+  /* layout */

+  char *screenname;

+  /* mouse settings */

+  char *mouse;

+  Bool emulate3buttons;

+  long emulate3timeout;

+}

+WinCmdlineRec, *WinCmdlinePtr;

+

+

+extern WinCmdlineRec g_cmdline;

+#ifdef XWIN_XF86CONFIG

+extern XF86ConfigPtr g_xf86configptr;

+#endif

+extern serverLayoutRec g_winConfigLayout;

+

+

+/*

+ * Function prototypes

+ */

+

+Bool winReadConfigfile (void);

+Bool winConfigFiles (void);

+Bool winConfigOptions (void);

+Bool winConfigScreens (void);

+Bool winConfigKeyboard (DeviceIntPtr pDevice);

+Bool winConfigMouse (DeviceIntPtr pDevice);

+

+

+typedef struct

+{

+  double freq;

+  int units;

+}

+OptFrequency;

+

+

+typedef union

+{

+  unsigned long num;

+  char *str;

+  double realnum;

+  Bool bool;

+  OptFrequency freq;

+}

+ValueUnion;

+

+

+typedef enum

+{

+  OPTV_NONE = 0,

+  OPTV_INTEGER,

+  OPTV_STRING,			/* a non-empty string */

+  OPTV_ANYSTR,			/* Any string, including an empty one */

+  OPTV_REAL,

+  OPTV_BOOLEAN,

+  OPTV_PERCENT,

+  OPTV_FREQ

+}

+OptionValueType;

+

+

+typedef enum

+{

+  OPTUNITS_HZ = 1,

+  OPTUNITS_KHZ,

+  OPTUNITS_MHZ

+}

+OptFreqUnits;

+

+

+typedef struct

+{

+  int token;

+  const char *name;

+  OptionValueType type;

+  ValueUnion value;

+  Bool found;

+}

+OptionInfoRec, *OptionInfoPtr;

+

+

+/*

+ * Function prototypes

+ */

+

+char *winSetStrOption (pointer optlist, const char *name, char *deflt);

+int winSetBoolOption (pointer optlist, const char *name, int deflt);

+int winSetIntOption (pointer optlist, const char *name, int deflt);

+double winSetRealOption (pointer optlist, const char *name, double deflt);

+double winSetPercentOption (pointer optlist, const char *name, double deflt);

+#ifdef XWIN_XF86CONFIG

+XF86OptionPtr winFindOption (XF86OptionPtr list, const char *name);

+char *winFindOptionValue (XF86OptionPtr list, const char *name);

+#endif

+int winNameCompare (const char *s1, const char *s2);

+char *winNormalizeName (const char *s);

+

+

+typedef struct

+{

+  struct

+  {

+    long leds;

+    long delay;

+    long rate;

+  }

+  keyboard;

+  XkbRMLVOSet xkb;

+  struct

+  {

+    Bool emulate3Buttons;

+    long emulate3Timeout;

+  }

+  pointer;

+}

+winInfoRec, *winInfoPtr;

+

+

+extern winInfoRec g_winInfo;

+

+#endif

diff --git a/xorg-server/hw/xwin/winwindowswm.c b/xorg-server/hw/xwin/winwindowswm.c
index d8cacdc99..218fddb6a 100644
--- a/xorg-server/hw/xwin/winwindowswm.c
+++ b/xorg-server/hw/xwin/winwindowswm.c
@@ -304,8 +304,7 @@ winWindowsWMSendEvent (int type, unsigned int mask, int which, int arg,
 #if CYGMULTIWINDOW_DEBUG

       ErrorF ("winWindowsWMSendEvent - x%08x\n", (int) client);

 #endif

-      if ((pEvent->mask & mask) == 0

-	  || client == serverClient || client->clientGone)

+      if ((pEvent->mask & mask) == 0)

 	{

 	  continue;

 	}

@@ -320,7 +319,6 @@ winWindowsWMSendEvent (int type, unsigned int mask, int which, int arg,
       se.y = y;

       se.w = w;

       se.h = h;

-      se.sequenceNumber = client->sequence;

       se.time = currentTime.milliseconds;

       WriteEventsToClient (client, 1, (xEvent *) &se);

     }